constants

package
v1.5.2 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Sep 7, 2023 License: MPL-2.0 Imports: 3 Imported by: 15

Documentation

Index

Constants

View Source 
const (
	// DefaultKernelVersion is the default Linux kernel version.
	DefaultKernelVersion = "6.1.51-talos"

	// DefaultKernelModulesPath is the default path to the kernel modules.
	DefaultKernelModulesPath = "/lib/modules" + "/" + DefaultKernelVersion

	// KernelParamConfig is the kernel parameter name for specifying the URL.
	// to the config.
	KernelParamConfig = "talos.config"

	// ConfigNone indicates no config is required.
	ConfigNone = "none"

	// KernelParamPlatform is the kernel parameter name for specifying the
	// platform.
	KernelParamPlatform = "talos.platform"

	// KernelParamBoard is the kernel parameter name for specifying the
	// SBC.
	KernelParamBoard = "talos.board"

	// KernelParamEventsSink is the kernel parameter name for specifying the
	// events sink server.
	KernelParamEventsSink = "talos.events.sink"

	// KernelParamLoggingKernel is the kernel parameter name for specifying the
	// kernel log delivery destination.
	KernelParamLoggingKernel = "talos.logging.kernel"

	// KernelParamWipe is the kernel parameter name for specifying the
	// disk to wipe on the next boot and reboot.
	KernelParamWipe = "talos.experimental.wipe"

	// KernelParamCGroups is the kernel parameter name for specifying the
	// cgroups version to use (default is cgroupsv2, setting this kernel arg to '0' forces cgroupsv1).
	KernelParamCGroups = "talos.unified_cgroup_hierarchy"

	// KernelParamDashboardDisabled is the kernel parameter name for disabling the dashboard.
	KernelParamDashboardDisabled = "talos.dashboard.disabled"

	// KernelParamEnvironment is the kernel parameter name for passing process environment.
	KernelParamEnvironment = "talos.environment"

	// KernelParamNetIfnames is the kernel parameter name to control predictable network interface names.
	KernelParamNetIfnames = "net.ifnames"

	// BoardNone indicates that the install is not for a specific board.
	BoardNone = "none"

	// BoardLibretechAllH3CCH5 is the  name of the Libre Computer board ALL-H3-CC.
	BoardLibretechAllH3CCH5 = "libretech_all_h3_cc_h5"

	// BoardRPiGeneric is the  name of the Raspberry Pi Compute Module 4.
	BoardRPiGeneric = "rpi_generic"

	// BoardBananaPiM64 is the  name of the Banana Pi M64.
	BoardBananaPiM64 = "bananapi_m64"

	// BoardPine64 is the  name of the Pine64.
	BoardPine64 = "pine64"

	// BoardJetsonNano is the name of the Jetson Nano.
	BoardJetsonNano = "jetson_nano"

	// BoardRock64 is the  name of the Rock64.
	BoardRock64 = "rock64"

	// BoardRockpi4 is the name of the Radxa Rock pi 4 revisions A and B.
	BoardRockpi4 = "rockpi_4"

	// BoardRockpi4c is the name of the Radxa Rock pi 4 revision C.
	BoardRockpi4c = "rockpi_4c"

	// BoardNanoPiR4S is the name of the Friendlyelec Nano Pi R4S.
	BoardNanoPiR4S = "nanopi_r4s"

	// KernelParamHostname is the kernel parameter name for specifying the
	// hostname.
	KernelParamHostname = "talos.hostname"

	// KernelParamShutdown is the kernel parameter for specifying the
	// shutdown type (halt/poweroff).
	KernelParamShutdown = "talos.shutdown"

	// KernelParamNetworkInterfaceIgnore is the kernel parameter for specifying network interfaces which should be ignored by talos.
	KernelParamNetworkInterfaceIgnore = "talos.network.interface.ignore"

	// KernelParamVlan is the kernel parameter for specifying vlan for the interface.
	KernelParamVlan = "vlan"

	// KernelParamBonding is the kernel parameter for specifying bonded network interfaces.
	KernelParamBonding = "bond"

	// KernelParamPanic is the kernel parameter name for specifying the time to wait until rebooting after kernel panic (0 disables reboot).
	KernelParamPanic = "panic"

	// KernelParamSideroLink is the kernel parameter name to specify SideroLink API endpoint.
	KernelParamSideroLink = "siderolink.api"

	// KernelParamEquinixMetalEvents is the kernel parameter name to specify the Equinix Metal phone home endpoint.
	// This param is injected by Equinix Metal and depends on the device ID and datacenter.
	KernelParamEquinixMetalEvents = "em.events_url"

	// NewRoot is the path where the switchroot target is mounted.
	NewRoot = "/root"

	// ExtensionLayers is the path where the extensions layers are stored.
	ExtensionLayers = "/layers"

	// ExtensionsConfigFile is the extensions layers configuration file name in the initramfs.
	ExtensionsConfigFile = "/extensions.yaml"

	// ExtensionsRuntimeConfigFile extensions layers configuration file name in the rootfs.
	ExtensionsRuntimeConfigFile = "/etc/extensions.yaml"

	// EFIPartitionLabel is the label of the partition to use for mounting at
	// the boot path.
	EFIPartitionLabel = "EFI"

	// EFIMountPoint is the label of the partition to use for mounting at
	// the boot path.
	EFIMountPoint = BootMountPoint + "/EFI"

	// EFIVarsMountPoint is mount point for efivars filesystem type.
	// https://www.kernel.org/doc/html/next/filesystems/efivarfs.html
	EFIVarsMountPoint = "/sys/firmware/efi/efivars"

	// BIOSGrubPartitionLabel is the label of the partition used by grub's second
	// stage bootloader.
	BIOSGrubPartitionLabel = "BIOS"

	// MetaPartitionLabel is the label of the meta partition.
	MetaPartitionLabel = "META"

	// StatePartitionLabel is the label of the state partition.
	StatePartitionLabel = "STATE"

	// StateMountPoint is the label of the partition to use for mounting at
	// the state path.
	StateMountPoint = "/system/state"

	// BootPartitionLabel is the label of the partition to use for mounting at
	// the boot path.
	BootPartitionLabel = "BOOT"

	// BootMountPoint is the label of the partition to use for mounting at
	// the boot path.
	BootMountPoint = "/boot"

	// EphemeralPartitionLabel is the label of the partition to use for
	// mounting at the data path.
	EphemeralPartitionLabel = "EPHEMERAL"

	// EphemeralMountPoint is the label of the partition to use for mounting at
	// the data path.
	EphemeralMountPoint = "/var"

	// RootMountPoint is the label of the partition to use for mounting at
	// the root path.
	RootMountPoint = "/"

	// ISOFilesystemLabel is the label of the ISO file system for the Talos
	// installer.
	ISOFilesystemLabel = "TALOS"

	// PATH defines all locations where executables are stored.
	PATH = "/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin:" + cni.DefaultCNIDir

	// KubernetesDefaultCertificateValidityDuration specifies default certificate duration for Kubernetes generated certificates.
	KubernetesDefaultCertificateValidityDuration = time.Hour * 24 * 365

	// DefaultCertificatesDir is the path the Kubernetes PKI directory.
	DefaultCertificatesDir = "/etc/kubernetes/pki"

	// KubernetesCACert is the path to the root CA certificate.
	KubernetesCACert = DefaultCertificatesDir + "/" + "ca.crt"

	// EtcdCACert is the path to the etcd CA certificate.
	EtcdCACert = EtcdPKIPath + "/" + "ca.crt"

	// EtcdCAKey is the path to the etcd CA private key.
	EtcdCAKey = EtcdPKIPath + "/" + "ca.key"

	// EtcdCert is the path to the etcd server certificate.
	EtcdCert = EtcdPKIPath + "/" + "server.crt"

	// EtcdKey is the path to the etcd server private key.
	EtcdKey = EtcdPKIPath + "/" + "server.key"

	// EtcdPeerCert is the path to the etcd peer certificate.
	EtcdPeerCert = EtcdPKIPath + "/" + "peer.crt"

	// EtcdPeerKey is the path to the etcd peer private key.
	EtcdPeerKey = EtcdPKIPath + "/" + "peer.key"

	// EtcdAdminCert is the path to the talos client certificate.
	EtcdAdminCert = EtcdPKIPath + "/" + "admin.crt"

	// EtcdAdminKey is the path to the talos client private key.
	EtcdAdminKey = EtcdPKIPath + "/" + "admin.key"

	// EtcdClientPort defines the port etcd listen on for client traffic.
	EtcdClientPort = 2379

	// EtcdPeerPort defines the port etcd listens on for peer traffic.
	EtcdPeerPort = 2380

	// KubernetesAdminCertCommonName defines CN property of Kubernetes admin certificate.
	KubernetesAdminCertCommonName = "admin"

	// KubernetesTalosAdminCertCommonName defines CN property of Kubernetes admin certificate used by Talos itself.
	KubernetesTalosAdminCertCommonName = "talos:admin"

	// KubernetesAdminCertOrganization defines Organization values of Kubernetes admin certificate.
	KubernetesAdminCertOrganization = "system:masters"

	// KubernetesAPIServerKubeletClientCommonName defines CN property of Kubernetes API server certificate to access kubelet API.
	KubernetesAPIServerKubeletClientCommonName = "apiserver-kubelet-client"

	// KubernetesControllerManagerOrganization defines Organization value of kube-controller-manager client certificate.
	KubernetesControllerManagerOrganization = "system:kube-controller-manager"

	// KubernetesSchedulerOrganization defines Organization value of kube-scheduler client certificate.
	KubernetesSchedulerOrganization = "system:kube-scheduler"

	// KubernetesAdminCertDefaultLifetime defines default lifetime for Kubernetes generated admin certificate.
	KubernetesAdminCertDefaultLifetime = 365 * 24 * time.Hour

	// KubebernetesStaticSecretsDir defines ephemeral directory which contains rendered secrets for controlplane components.
	KubebernetesStaticSecretsDir = "/system/secrets/kubernetes"

	// KubebernetesStaticConfigDir defines ephemeral directory which contains rendered configs for controlplane components.
	KubebernetesStaticConfigDir = "/system/config/kubernetes"

	// KubernetesAuditLogDir defines the ephemeral directory where the kube-apiserver will store its audit logs.
	KubernetesAuditLogDir = EphemeralMountPoint + "/" + "log" + "/" + "audit" + "/" + "kube"

	// KubernetesAPIServerSecretsDir defines directory with kube-apiserver secrets.
	KubernetesAPIServerSecretsDir = KubebernetesStaticSecretsDir + "/" + "kube-apiserver"

	// KubernetesAPIServerConfigDir defines directory with kube-apiserver configs.
	KubernetesAPIServerConfigDir = KubebernetesStaticConfigDir + "/" + "kube-apiserver"

	// KubernetesControllerManagerSecretsDir defines ephemeral directory with kube-controller-manager secrets.
	KubernetesControllerManagerSecretsDir = KubebernetesStaticSecretsDir + "/" + "kube-controller-manager"

	// KubernetesSchedulerSecretsDir defines ephemeral directory with kube-scheduler secrets.
	KubernetesSchedulerSecretsDir = KubebernetesStaticSecretsDir + "/" + "kube-scheduler"

	// KubernetesAPIServerRunUser defines UID to the API Server.
	KubernetesAPIServerRunUser = 65534

	// KubernetesAPIServerRunGroup defines GID to run the API Server.
	KubernetesAPIServerRunGroup = 65534

	// KubernetesControllerManagerRunUser defines UID to the Controller Manager.
	KubernetesControllerManagerRunUser = 65535

	// KubernetesControllerManagerRunGroup defines GID to run the Controller Manager.
	KubernetesControllerManagerRunGroup = 65535

	// KubernetesSchedulerRunUser defines UID to the Scheduler.
	KubernetesSchedulerRunUser = 65536

	// KubernetesSchedulerRunGroup defines GID to run the Scheduler.
	KubernetesSchedulerRunGroup = 65536

	// KubeletBootstrapKubeconfig is the path to the kubeconfig required to
	// bootstrap the kubelet.
	KubeletBootstrapKubeconfig = "/etc/kubernetes/bootstrap-kubeconfig"

	// KubeletPort is the kubelet port for secure API.
	KubeletPort = 10250

	// KubeletOOMScoreAdj oom_score_adj config.
	KubeletOOMScoreAdj = -450

	// KubeletPKIDir is the path to the directory where kubelet stores issued certificates and keys.
	KubeletPKIDir = "/var/lib/kubelet/pki"

	// SystemKubeletPKIDir is the path to the directory where Talos copies kubelet issued certificates and keys.
	SystemKubeletPKIDir = "/system/secrets/kubelet"

	// KubeletShutdownGracePeriod is the kubelet shutdown grace period.
	KubeletShutdownGracePeriod = 30 * time.Second

	// KubeletShutdownGracePeriodCriticalPods is the kubelet shutdown grace period for critical pods.
	//
	// Should be less than KubeletShutdownGracePeriod.
	KubeletShutdownGracePeriodCriticalPods = 10 * time.Second

	// SeccompProfilesDirectory is the path to the directory where user provided seccomp profiles are mounted inside Kubelet.
	SeccompProfilesDirectory = "/var/lib/kubelet/seccomp/profiles"

	// DefaultKubernetesVersion is the default target version of the control plane.
	// renovate: datasource=github-releases depName=kubernetes/kubernetes
	DefaultKubernetesVersion = "1.28.1"

	// DefaultControlPlanePort is the default port to use for the control plane.
	DefaultControlPlanePort = 6443

	// KubeletImage is the enforced kubelet image to use.
	KubeletImage = "ghcr.io/siderolabs/kubelet"

	// KubeProxyImage is the enforced kube-proxy image to use for the control plane.
	KubeProxyImage = "registry.k8s.io/kube-proxy"

	// KubernetesAPIServerImage is the enforced apiserver image to use for the control plane.
	KubernetesAPIServerImage = "registry.k8s.io/kube-apiserver"

	// KubernetesControllerManagerImage is the enforced controllermanager image to use for the control plane.
	KubernetesControllerManagerImage = "registry.k8s.io/kube-controller-manager"

	// KubernetesSchedulerImage is the enforced scheduler image to use for the control plane.
	KubernetesSchedulerImage = "registry.k8s.io/kube-scheduler"

	// CoreDNSImage is the enforced CoreDNS image to use.
	CoreDNSImage = "registry.k8s.io/coredns/coredns"

	// DefaultCoreDNSVersion is the default version for the CoreDNS.
	// renovate: datasource=github-releases depName=coredns/coredns
	DefaultCoreDNSVersion = "v1.10.1"

	// LabelNodeRoleControlPlane is the node label required by a control plane node.
	LabelNodeRoleControlPlane = "node-role.kubernetes.io/control-plane"

	// ManifestsDirectory is the directory that contains all static manifests.
	ManifestsDirectory = "/etc/kubernetes/manifests"

	// TalosManifestPrefix is the prefix for static pod files created in ManifestsDirectory by Talos.
	TalosManifestPrefix = "talos-"

	// KubeletKubeconfig is the generated kubeconfig for kubelet.
	KubeletKubeconfig = "/etc/kubernetes/kubeconfig-kubelet"

	// KubeletSystemReservedCPU cpu system reservation value for kubelet kubeconfig.
	KubeletSystemReservedCPU = "50m"

	// KubeletSystemReservedMemory memory system reservation value for kubelet kubeconfig.
	KubeletSystemReservedMemory = "192Mi"

	// KubeletSystemReservedPid pid system reservation value for kubelet kubeconfig.
	KubeletSystemReservedPid = "100"

	// KubeletSystemReservedEphemeralStorage ephemeral-storage system reservation value for kubelet kubeconfig.
	KubeletSystemReservedEphemeralStorage = "256Mi"

	// DefaultEtcdVersion is the default target version of etcd.
	// renovate: datasource=github-releases depName=etcd-io/etcd
	DefaultEtcdVersion = "v3.5.9"

	// EtcdRootTalosKey is the root etcd key for Talos-specific storage.
	EtcdRootTalosKey = "talos:v1"

	// EtcdTalosEtcdUpgradeMutex is the etcd mutex prefix to be used to set an etcd upgrade lock.
	EtcdTalosEtcdUpgradeMutex = EtcdRootTalosKey + ":etcdUpgradeMutex"

	// EtcdTalosManifestApplyMutex is the etcd mutex prefix used by manifest apply controller.
	EtcdTalosManifestApplyMutex = EtcdRootTalosKey + ":manifestApplyMutex"

	// EtcdTalosServiceAccountCRDControllerMutex is the etcd mutex prefix used by Talos ServiceAccount crd controller.
	EtcdTalosServiceAccountCRDControllerMutex = EtcdRootTalosKey + ":serviceAccountCRDController"

	// EtcdImage is the reposistory for the etcd image.
	EtcdImage = "gcr.io/etcd-development/etcd"

	// EtcdPKIPath is the path to the etcd PKI directory.
	EtcdPKIPath = "/system/secrets/etcd"

	// EtcdDataPath is the path where etcd stores its' data.
	EtcdDataPath = "/var/lib/etcd"

	// EtcdRecoverySnapshotPath is the path where etcd snapshot is uploaded for recovery.
	EtcdRecoverySnapshotPath = "/var/lib/etcd.snapshot"

	// EtcdUserID is the user ID for the etcd process.
	EtcdUserID = 60

	// ConfigPath is the path to the downloaded config.
	ConfigPath = StateMountPoint + "/config.yaml"

	// ConfigTryTimeout is the timeout of the config apply in try mode.
	ConfigTryTimeout = time.Minute

	// MetalConfigISOLabel is the volume label for ISO based configuration.
	MetalConfigISOLabel = "metal-iso"

	// ConfigGuestInfo is the name of the VMware guestinfo config strategy.
	ConfigGuestInfo = "guestinfo"

	// VMwareGuestInfoConfigKey is the guestinfo key used to provide a config file.
	VMwareGuestInfoConfigKey = "talos.config"

	// VMwareGuestInfoFallbackKey is the fallback guestinfo key used to provide a config file.
	VMwareGuestInfoFallbackKey = "userdata"

	// VMwareGuestInfoMetadataKey is the guestinfo key used to provide metadata.
	VMwareGuestInfoMetadataKey = "metadata"

	// VMwareGuestInfoOvfEnvKey is the guestinfo key used to provide the OVF environment.
	VMwareGuestInfoOvfEnvKey = "ovfenv"

	// AuditPolicyPath is the path to the audit-policy.yaml relative to initramfs.
	AuditPolicyPath = "/etc/kubernetes/audit-policy.yaml"

	// EncryptionConfigPath is the path to the EncryptionConfig relative to initramfs.
	EncryptionConfigPath = "/etc/kubernetes/encryptionconfig.yaml"

	// EncryptionConfigRootfsPath is the path to the EncryptionConfig relative to rootfs.
	EncryptionConfigRootfsPath = "/etc/kubernetes/encryptionconfig.yaml"

	// ApidPort is the port for the apid service.
	ApidPort = 50000

	// ApidUserID is the user ID for apid.
	ApidUserID = 50

	// DashboardUserID is the user ID for dashboard.
	// We use the same user ID as apid so that the dashboard can write to the machined unix socket.
	DashboardUserID = ApidUserID

	// TrustdPort is the port for the trustd service.
	TrustdPort = 50001

	// TrustdUserID is the user ID for trustd.
	TrustdUserID = 51

	// DefaultContainerdVersion is the default container runtime version.
	DefaultContainerdVersion = "1.6.23"

	// SystemContainerdNamespace is the Containerd namespace for Talos services.
	SystemContainerdNamespace = "system"

	// SystemContainerdAddress is the path to the system containerd socket.
	SystemContainerdAddress = SystemRunPath + "/containerd/containerd.sock"

	// CRIContainerdAddress is the path to the CRI containerd socket address.
	CRIContainerdAddress = "/run/containerd/containerd.sock"

	// CRIContainerdConfig is the path to the config for the containerd instance that provides the CRI.
	CRIContainerdConfig = "/etc/cri/containerd.toml"

	// CRIConfdPath is the path to the directory providing parts of CRI plugin configuration.
	CRIConfdPath = "/etc/cri/conf.d"

	// CRIConfig is the path to the CRI merged configuration file relative to /etc.
	CRIConfig = "cri/conf.d/cri.toml"

	// CRIRegistryConfigPart is the path to the CRI generated registry configuration relative to /etc.
	CRIRegistryConfigPart = "cri/conf.d/01-registries.part"

	// CRICustomizationConfigPart is the path to the CRI generated registry configuration relative to /etc.
	CRICustomizationConfigPart = "cri/conf.d/20-customization.part"

	// TalosConfigEnvVar is the environment variable for setting the Talos configuration file path.
	TalosConfigEnvVar = "TALOSCONFIG"

	// APISocketPath is the path to file socket of apid.
	APISocketPath = SystemRunPath + "/apid/apid.sock"

	// APIRuntimeSocketPath is the path to file socket of runtime server for apid.
	APIRuntimeSocketPath = SystemRunPath + "/apid/runtime.sock"

	// TrustdRuntimeSocketPath is the path to file socket of runtime server for trustd.
	TrustdRuntimeSocketPath = SystemRunPath + "/trustd/runtime.sock"

	// MachineSocketPath is the path to file socket of machine API.
	MachineSocketPath = SystemRunPath + "/machined/machine.sock"

	// NetworkSocketPath is the path to file socket of network API.
	NetworkSocketPath = SystemRunPath + "/networkd/networkd.sock"

	// ArchVariable is replaced automatically by the target cluster arch.
	ArchVariable = "${ARCH}"

	// KernelAsset defines a well known name for our kernel filename.
	KernelAsset = "vmlinuz"

	// KernelAssetWithArch defines a well known name for our kernel filename with arch variable.
	KernelAssetWithArch = "vmlinuz-" + ArchVariable

	// KernelAssetPath is the path to the kernel on disk.
	KernelAssetPath = "/usr/install/%s/" + KernelAsset

	// InitramfsAsset defines a well known name for our initramfs filename.
	InitramfsAsset = "initramfs.xz"

	// InitramfsAssetWithArch defines a well known name for our initramfs filename with arch variable.
	InitramfsAssetWithArch = "initramfs-" + ArchVariable + ".xz"

	// InitramfsAssetPath is the path to the initramfs on disk.
	InitramfsAssetPath = "/usr/install/%s/" + InitramfsAsset

	// RootfsAsset defines a well known name for our rootfs filename.
	RootfsAsset = "rootfs.sqsh"

	// UKIAsset defines a well known name for our UKI filename.
	UKIAsset = "vmlinuz.efi.signed"

	// UKIAssetPath is the path to the UKI in the installer.
	UKIAssetPath = "/usr/install/%s/" + UKIAsset

	// SDStubAsset defines a well known name for our systemd-stub filename.
	SDStubAsset = "systemd-stub.efi"

	// SDStubAssetPath is the path to the systemd-stub in the installer.
	SDStubAssetPath = "/usr/install/%s/" + SDStubAsset

	// SDBootAsset defines a well known name for our SDBoot filename.
	SDBootAsset = "systemd-boot.efi"

	// SDBootAssetPath is the path to the SDBoot in the installer.
	SDBootAssetPath = "/usr/install/%s/" + SDBootAsset

	// PlatformKeyAsset defines a well known name for the platform key filename used for auto-enrolling.
	PlatformKeyAsset = "PK.auth"

	// KeyExchangeKeyAsset defines a well known name for the key exchange key filename used for auto-enrolling.
	KeyExchangeKeyAsset = "KEK.auth"

	// SignatureKeyAsset defines a well known name for the signature key filename used for auto-enrolling.
	SignatureKeyAsset = "db.auth"

	// SecureBootSigningKeyAsset defines a well known name for the secure boot signing key filename.
	SecureBootSigningKeyAsset = "uki-signing-key.pem"

	// SecureBootSigningCertAsset defines a well known name for the secure boot signing key filename.
	SecureBootSigningCertAsset = "uki-signing-cert.pem"

	// PCRSigningKeyAsset defines a well known name for the PCR signing key filename.
	PCRSigningKeyAsset = "pcr-signing-key.pem"

	// PCRSigningPublicKeyAsset defines a well known name for the PCR signing public key filename.
	PCRSigningPublicKeyAsset = "pcr-signing-public-key.pem"

	// SDStubDynamicInitrdPath is the path where dynamically generated initrds are placed by systemd-stub.
	// https://www.mankier.com/7/systemd-stub#Description
	SDStubDynamicInitrdPath = "/.extra"

	// PCRSignatureJSON is the path to the PCR signature JSON file.
	// https://www.mankier.com/7/systemd-stub#Initrd_Resources
	PCRSignatureJSON = SDStubDynamicInitrdPath + "/" + "tpm2-pcr-signature.json"

	// PCRPublicKey is the path to the PCR public key file.
	// https://www.mankier.com/7/systemd-stub#Initrd_Resources
	PCRPublicKey = SDStubDynamicInitrdPath + "/" + "tpm2-pcr-public-key.pem"

	// DefaultCertificateValidityDuration is the default duration for a certificate.
	DefaultCertificateValidityDuration = x509.DefaultCertificateValidityDuration

	// SystemPath is the path to write temporary runtime system related files
	// and directories.
	SystemPath = "/system"

	// VarSystemOverlaysPath is the path where overlay mounts are created.
	VarSystemOverlaysPath = "/var/system/overlays"

	// SystemRunPath is the path to the system run directory.
	SystemRunPath = SystemPath + "/run"

	// SystemVarPath is the path to the system var directory.
	SystemVarPath = SystemPath + "/var"

	// SystemEtcPath is the path to the system etc directory.
	SystemEtcPath = SystemPath + "/etc"

	// SystemLibexecPath is the path to the system libexec directory.
	SystemLibexecPath = SystemPath + "/libexec"

	// SystemExtensionsPath is the path to the system extensions directory.
	SystemExtensionsPath = SystemPath + "/extensions"

	// SystemOverlaysPath is the path to the system overlay directory.
	SystemOverlaysPath = SystemPath + "/overlays"

	// CgroupMountPath is the default mount path for unified cgroupsv2 setup.
	CgroupMountPath = "/sys/fs/cgroup"

	// CgroupInit is the cgroup name for init process.
	CgroupInit = "/init"

	// CgroupInitReservedMemory is the hard memory protection for the init process.
	CgroupInitReservedMemory = 96 * 1024 * 1024

	// CgroupSystem is the cgroup name for system processes.
	CgroupSystem = "/system"

	// CgroupSystemReservedMemory is the hard memory protection for the system processes.
	CgroupSystemReservedMemory = 96 * 1024 * 1024

	// CgroupSystemRuntime is the cgroup name for containerd runtime processes.
	CgroupSystemRuntime = CgroupSystem + "/runtime"

	// CgroupExtensions is the cgroup name for system extension processes.
	CgroupExtensions = CgroupSystem + "/extensions"

	// CgroupDashboard is the cgroup name for dashboard process.
	CgroupDashboard = CgroupSystem + "/dashboard"

	// CgroupPodRuntime is the cgroup name for kubernetes containerd runtime processes.
	CgroupPodRuntime = "/podruntime/runtime"

	// CgroupPodRuntimeReservedMemory is the hard memory protection for the cri runtime processes.
	CgroupPodRuntimeReservedMemory = 128 * 1024 * 1024

	// CgroupKubelet is the cgroup name for kubelet process.
	CgroupKubelet = "/podruntime/kubelet"

	// CgroupKubeletReservedMemory is the hard memory protection for the kubelet processes.
	CgroupKubeletReservedMemory = 64 * 1024 * 1024

	// CgroupDashboardReservedMemory is the hard memory protection for the dashboard process.
	CgroupDashboardReservedMemory = 85 * 1024 * 1024

	// CgroupDashboardLowMemory is the low memory value for the dashboard process.
	CgroupDashboardLowMemory = 100 * 1024 * 1024

	// FlannelCNI is the string to use Tanos-managed Flannel CNI (default).
	FlannelCNI = "flannel"

	// CustomCNI is the string to use custom CNI managed by Tanos with extra manifests.
	CustomCNI = "custom"

	// NoneCNI is the string to indicate that CNI will not be managed by Talos.
	NoneCNI = "none"

	// DefaultIPv4PodNet is the IPv4 network to be used for kubernetes Pods.
	DefaultIPv4PodNet = "10.244.0.0/16"

	// DefaultIPv4ServiceNet is the IPv4 network to be used for kubernetes Services.
	DefaultIPv4ServiceNet = "10.96.0.0/12"

	// DefaultIPv6PodNet is the IPv6 network to be used for kubernetes Pods.
	DefaultIPv6PodNet = "fc00:db8:10::/56"

	// DefaultIPv6ServiceNet is the IPv6 network to be used for kubernetes Services.
	DefaultIPv6ServiceNet = "fc00:db8:20::/112"

	// DefaultDNSDomain is the default DNS domain.
	DefaultDNSDomain = "cluster.local"

	// ConfigLoadTimeout is the timeout to wait for the config to be loaded from an external source.
	ConfigLoadTimeout = 3 * time.Hour

	// ConfigLoadAttemptTimeout is the timeout for a single attempt to download config.
	ConfigLoadAttemptTimeout = 3 * time.Minute

	// BootTimeout is the timeout to run all services.
	BootTimeout = 70 * time.Minute

	// FailurePauseTimeout is the timeout for the sequencer failures which can be fixed by updating the machine config.
	FailurePauseTimeout = 35 * time.Minute

	// EtcdJoinTimeout is the timeout for etcd to join the existing cluster.
	//
	// BootTimeout should be higher than EtcdJoinTimeout.
	EtcdJoinTimeout = 30 * time.Minute

	// NodeReadyTimeout is the timeout to wait for the node to be ready (CNI to be running).
	// For bootstrap API, this includes time to run bootstrap.
	NodeReadyTimeout = BootTimeout

	// AnnotationCordonedKey is the annotation key for the nodes cordoned by Talos.
	AnnotationCordonedKey = "talos.dev/cordoned"

	// AnnotationCordonedValue is the annotation key for the nodes cordoned by Talos.
	AnnotationCordonedValue = "true"

	// AnnotationStaticPodSecretsVersion is the annotation key for the static pod secret version.
	AnnotationStaticPodSecretsVersion = "talos.dev/secrets-version"

	// AnnotationStaticPodConfigVersion is the annotation key for the static pod config version.
	AnnotationStaticPodConfigVersion = "talos.dev/config-version"

	// AnnotationStaticPodConfigFileVersion is the annotation key for the static pod configuration file version.
	AnnotationStaticPodConfigFileVersion = "talos.dev/config-file-version"

	// AnnotationOwnedLabels is the annotation key for the list of node labels owned by Talos.
	AnnotationOwnedLabels = "talos.dev/owned-labels"

	// AnnotationOwnedTaints is the annotation key for the list of node taints owned by Talos.
	AnnotationOwnedTaints = "talos.dev/owned-taints"

	// DefaultNTPServer is the NTP server to use if not configured explicitly.
	//
	// TODO: Once we get naming sorted we need to apply for a project specific address
	// https://manage.ntppool.org/manage/vendor
	DefaultNTPServer = "pool.ntp.org"

	// DefaultPrimaryResolver is the default primary DNS server.
	DefaultPrimaryResolver = "1.1.1.1"

	// DefaultSecondaryResolver is the default secondary DNS server.
	DefaultSecondaryResolver = "8.8.8.8"

	// DefaultClusterIDSize is the default size in bytes for the cluster ID token.
	DefaultClusterIDSize = 32

	// DefaultClusterSecretSize is the default size in bytes for the cluster secret.
	DefaultClusterSecretSize = 32

	// DefaultNodeIdentitySize is the default size in bytes for the node ID.
	DefaultNodeIdentitySize = 32

	// NodeIdentityFilename is the filename to cache node identity across reboots.
	NodeIdentityFilename = "node-identity.yaml"

	// DefaultDiscoveryServiceEndpoint is the default endpoint for Talos discovery service.
	DefaultDiscoveryServiceEndpoint = "https://discovery.talos.dev/"

	// KubeSpanIdentityFilename is the filename to cache KubeSpan identity across reboots.
	KubeSpanIdentityFilename = "kubespan-identity.yaml"

	// KubeSpanDefaultPort is the default Wireguard listening port for incoming connections.
	KubeSpanDefaultPort = 51820

	// KubeSpanDefaultRoutingTable is the default routing table for KubeSpan LAN targets.
	//
	// This specifies the routing table which will be used for Wireguard-available destinations.
	KubeSpanDefaultRoutingTable = 180

	// KubeSpanDefaultFirewallMark is the default firewall mark to use for Wireguard encrypted egress packets.
	//
	// Normal Wireguard configurations will NOT use this firewall mark.
	KubeSpanDefaultFirewallMark = 0x20

	// KubeSpanDefaultForceFirewallMark is the default firewall mark to use for packets destined to IPs serviced by KubeSpan.
	//
	// It is used to signal that matching packets should be forced into the Wireguard interface.
	KubeSpanDefaultForceFirewallMark = 0x40

	// KubeSpanDefaultFirewallMask is the mask applied to the packet mark when matching and setting the mark.
	//
	// This mask signals the bits of the firewall mark used by KubeSpan.
	KubeSpanDefaultFirewallMask = KubeSpanDefaultFirewallMark | KubeSpanDefaultForceFirewallMark

	// KubeSpanDefaultPeerKeepalive is the interval at which Wireguard Peer Keepalives should be sent.
	KubeSpanDefaultPeerKeepalive = 25 * time.Second

	// NetworkSelfIPsAnnotation is the node annotation used to list the (comma-separated) IP addresses of the host, as discovered by Talos tooling.
	NetworkSelfIPsAnnotation = "networking.talos.dev/self-ips"

	// ClusterNodeIDAnnotation is the node annotation used to represent node ID.
	ClusterNodeIDAnnotation = "cluster.talos.dev/node-id"

	// KubeSpanIPAnnotation is the node annotation to be used for indicating the Wireguard IP of the node.
	KubeSpanIPAnnotation = "networking.talos.dev/kubespan-ip"

	// KubeSpanPublicKeyAnnotation is the node annotation to be used for indicating the Wireguard Public Key of the node.
	KubeSpanPublicKeyAnnotation = "networking.talos.dev/kubespan-public-key"

	// KubeSpanAssignedPrefixesAnnotation is the node annotation use to list the (comma-separated) set of IP prefixes for which the annotated node should be responsible.
	KubeSpanAssignedPrefixesAnnotation = "networking.talos.dev/assigned-prefixes"

	// KubeSpanKnownEndpointsAnnotation is the node annotation used to list the (comma-separated) known-good Wireguard endpoints for the node, as seen by other peers.
	KubeSpanKnownEndpointsAnnotation = "networking.talos.dev/kubespan-endpoints"

	// KubeSpanLinkName is the link name for the KubeSpan Wireguard interface.
	KubeSpanLinkName = "kubespan"

	// KubeSpanLinkMTU is the default link MTU size for the KubeSpan Wireguard interface.
	KubeSpanLinkMTU = 1420

	// KubeSpanLinkMinimumMTU is the minimum link MTU size for the KubeSpan Wireguard interface.
	//
	// This is the minimum MTU size for the Wireguard interface with IPv6 enabled.
	// See: https://lore.kernel.org/wireguard/20190321033638.1ff82682@natsu/t/
	KubeSpanLinkMinimumMTU = 1280

	// UdevDir is the path to the udev directory.
	UdevDir = "/usr/etc/udev"

	// UdevRulesPath rules file path.
	UdevRulesPath = UdevDir + "/" + "rules.d/99-talos.rules"

	// LoggingFormatJSONLines represents "JSON lines" logging format.
	LoggingFormatJSONLines = "json_lines"

	// SideroLinkName is the interface name for SideroLink.
	SideroLinkName = "siderolink"

	// SideroLinkDefaultPeerKeepalive is the interval at which Wireguard Peer Keepalives should be sent.
	SideroLinkDefaultPeerKeepalive = 25 * time.Second

	// PlatformNetworkConfigFilename is the filename to cache platform network configuration reboots.
	PlatformNetworkConfigFilename = "platform-network.yaml"

	// FirmwarePath is the path to the standard Linux firmware location.
	FirmwarePath = "/lib/firmware"

	// ExtensionServicesConfigPath is the directory path which contains  configuration files of extension services.
	//
	// See pkg/machinery/extensions/services for the file format.
	ExtensionServicesConfigPath = "/usr/local/etc/containers"

	// ExtensionServicesRootfsPath is the path to the extracted rootfs files of extension services.
	ExtensionServicesRootfsPath = "/usr/local/lib/containers"

	// DBusServiceSocketPath is the path to the D-Bus socket for the logind mock to connect to.
	DBusServiceSocketPath = SystemRunPath + "/dbus/service.socket"

	// DBusClientSocketPath is the path to the D-Bus socket for the kubelet to connect to.
	DBusClientSocketPath = "/run/dbus/system_bus_socket"

	// GoVersion is the version of Go compiler this release was built with.
	GoVersion = "go1.20.8"

	// KubernetesTalosAPIServiceName is the name of the Kubernetes service to access Talos API.
	KubernetesTalosAPIServiceName = "talos"

	// KubernetesTalosAPIServiceNamespace is the namespace of the Kubernetes service to access Talos API.
	KubernetesTalosAPIServiceNamespace = "default"

	// TalosDir is the default name of the Talos directory under user home.
	TalosDir = ".talos"

	// TalosconfigFilename is the file name of Talosconfig under TalosDir or under ServiceAccountMountPath inside a pod.
	TalosconfigFilename = "config"

	// KubernetesTalosProvider is the name of the Talos provider as a Kubernetes label.
	KubernetesTalosProvider = "talos.dev"

	// ServiceAccountResourceGroup is the group name of the Talos service account CRD.
	ServiceAccountResourceGroup = "talos.dev"

	// ServiceAccountResourceVersion is the version of the Talos service account CRD.
	ServiceAccountResourceVersion = "v1alpha1"

	// ServiceAccountResourceKind is the kind name of the Talos service account CRD.
	ServiceAccountResourceKind = "ServiceAccount"

	// ServiceAccountResourceSingular is the singular name of the Talos service account CRD.
	ServiceAccountResourceSingular = "serviceaccount"

	// ServiceAccountResourceShortName is the short name of the service account CRD.
	ServiceAccountResourceShortName = "tsa"

	// ServiceAccountResourcePlural is the plural name of the service account CRD.
	ServiceAccountResourcePlural = ServiceAccountResourceSingular + "s"

	// ServiceAccountMountPath is the path of the directory in which the Talos service account secrets are mounted.
	ServiceAccountMountPath = "/var/run/secrets/talos.dev"

	// DefaultTrustedCAFile is the default path to the trusted CA file.
	DefaultTrustedCAFile = "/etc/ssl/certs/ca-certificates"

	// MachinedMaxProcs is the maximum number of GOMAXPROCS for machined.
	MachinedMaxProcs = 4

	// ApidMaxProcs is the maximum number of GOMAXPROCS for apid.
	ApidMaxProcs = 2

	// TrustdMaxProcs is the maximum number of GOMAXPROCS for trustd.
	TrustdMaxProcs = 2

	// DashboardMaxProcs is the maximum number of GOMAXPROCS for dashboard.
	DashboardMaxProcs = 2

	// APIAuthzRoleMetadataKey is the gRPC metadata key used to submit a role with os:impersonator.
	APIAuthzRoleMetadataKey = "talos-role"

	// KernelLogsTTY is the number of the TTY device (/dev/ttyN) to redirect Kernel logs to.
	KernelLogsTTY = 1

	// DashboardTTY is the number of the TTY device (/dev/ttyN) for dashboard.
	DashboardTTY = 2

	// FlannelVersion is the version of flannel to use.
	FlannelVersion = "v0.22.1"

	// PlatformMetal is the name of the metal platform.
	PlatformMetal = "metal"

	// MetaValuesEnvVar is the name of the environment variable to store encoded meta values for the disk image (installer).
	MetaValuesEnvVar = "INSTALLER_META_BASE64"

	// MaintenanceServiceCommonName is the CN of the maintenance service server certificate.
	MaintenanceServiceCommonName = "maintenance-service.talos.dev"

	// GRPCMaxMessageSize is the maximum message size for Talos API.
	GRPCMaxMessageSize = 32 * 1024 * 1024

	// TcellMinimizeEnvironment is the environment variable to minimize tcell library memory usage (skips rune width calculation).
	TcellMinimizeEnvironment = "TCELL_MINIMIZE=1"

	// KubePrismDialTimeout is the timeout for the KubePrism loadbalancer dialing an endpoint.
	KubePrismDialTimeout = 15 * time.Second

	// KubePrismKeepAlivePeriod is the TCP keepalive period for the KubePrism loadbalancer.
	KubePrismKeepAlivePeriod = 30 * time.Second

	// KubePrismTCPUserTimeout is the TCP user timeout for the KubePrism loadbalancer.
	KubePrismTCPUserTimeout = 30 * time.Second

	// KubePrismHealthCheckInterval is the interval between health checks for the KubePrism loadbalancer.
	KubePrismHealthCheckInterval = 20 * time.Second

	// KubePrismHealthCheckTimeout is the timeout for health checks for the KubePrism loadbalancer.
	KubePrismHealthCheckTimeout = 15 * time.Second

	// TalosAPIDefaultCertificateValidityDuration specifies default certificate duration for Talos API generated client certificates.
	TalosAPIDefaultCertificateValidityDuration = time.Hour * 24 * 365
)
View Source 
const (
	// SYSLOG_ACTION_SIZE_BUFFER is a named type argument to klogctl.
	//nolint:golint
	SYSLOG_ACTION_SIZE_BUFFER = 10

	// SYSLOG_ACTION_READ_ALL is a named type argument to klogctl.
	//nolint:golint
	SYSLOG_ACTION_READ_ALL = 3
)

See https://linux.die.net/man/3/klogctl

View Source 
const (
	UUIDKey         = "uuid"
	SerialNumberKey = "serial"
	HostnameKey     = "hostname"
	MacKey          = "mac"
	CodeKey         = "code"
)

names of variable that can be substituted in the talos.config kernel parameter.

View Source 
const OSReleaseTemplate = `` /* 262-byte string literal not displayed */

OSReleaseTemplate is the template for /etc/os-release.

Variables

View Source 
var DefaultDroppedCapabilities = map[string]struct{}{
	"cap_sys_boot":   {},
	"cap_sys_module": {},
}

DefaultDroppedCapabilities is the default set of capabilities to drop.

View Source 
var Overlays = []string{
	"/etc/cni",
	"/etc/kubernetes",
	"/usr/libexec/kubernetes",
	"/opt",
}

Overlays is the set of paths to create overlay mounts for.

View Source 
var UdevdDroppedCapabilities = map[string]struct{}{
	"cap_sys_boot": {},
}

UdevdDroppedCapabilities is the set of capabilities to drop for udevd.

Functions

This section is empty.

Types

This section is empty.

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.