ibc_rate_limit

package
v0.0.0-...-878d61a Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Feb 10, 2023 License: Apache-2.0 Imports: 25 Imported by: 0

README

IBC Rate Limit

The IBC Rate Limit module is responsible for adding a governance-configurable rate limit to IBC transfers. This is a safety control, intended to protect assets on furyan in event of:

  • a bug/hack on furyan
  • a bug/hack on the counter-party chain
  • a bug/hack in IBC itself

This is done in exchange for a potential (one-way) bridge liveness tradeoff, in periods of high deposits or withdrawals.

The architecture of this package is a minimal go package which implements an IBC Middleware that wraps the ICS20 transfer app, and calls into a cosmwasm contract. The cosmwasm contract then has all of the actual IBC rate limiting logic. The Cosmwasm code can be found in the contracts package, with bytecode findable in the bytecode folder. The cosmwasm VM usage allows Furyans chain governance to choose to change this safety control with no hard forks, via a parameter change proposal, a great mitigation for faster threat adaptavity.

The status of the module is being in a state suitable for some initial governance settable rate limits for high value bridged assets. Its not in its long term / end state for all channels by any means, but does act as a strong protection we can instantiate today for high value IBC connections.

Motivation

The motivation of IBC-rate-limit comes from the empirical observations of blockchain bridge hacks that a rate limit would have massively reduced the stolen amount of assets in:

In the presence of a software bug on Furyans, IBC itself, or on a counterparty chain, we would like to prevent the bridge from being fully depegged. This stems from the idea that a 30% asset depeg is ~infinitely better than a 100% depeg. Its crazy that today these complex bridged assets can instantly go to 0 in event of bug. The goal of a rate limit is to raise an alert that something has potentially gone wrong, allowing validators and developers to have time to analyze, react, and protect larger portions of user funds.

The thesis of this is that, it is worthwile to sacrifice liveness in the case of legitimate demand to send extreme amounts of funds, to prevent the terrible long-tail full fund risks. Rate limits aren't the end-all of safety controls, they're merely the simplest automated one. More should be explored and added onto IBC!

Rate limit types

We express rate limits in time-based periods. This means, we set rate limits for (say) 6-hour, daily, and weekly intervals. The rate limit for a given time period stores the relevant amount of assets at the start of the rate limit. Rate limits are then defined on percentage terms of the asset. The time windows for rate limits are currently not rolling, they have discrete start/end times.

We allow setting separate rate limits for the inflow and outflow of assets. We do all of our rate limits based on the net flow of assets on a channel pair. This prevents DOS issues, of someone repeatedly sending assets back and forth, to trigger rate limits and break liveness.

We currently envision creating two kinds of rate limits:

  • Per denomination rate limits
    • allows safety statements like "Only 30% of Stars on Furyans can flow out in one day" or "The amount of Atom on Furyans can at most double per day".
  • Per channel rate limits
    • Limit the total inflow and outflow on a given IBC channel, based on "USDC" equivalent, using Furyans as the price oracle.

We currently only implement per denomination rate limits for non-native assets. We do not yet implement channel based rate limits.

Currently these rate limits automatically "expire" at the end of the quota duration. TODO: Think of better designs here. E.g. can we have a constant number of subsequent quotas start filled? Or perhaps harmonically decreasing amounts of next few quotas pre-filled? Halted until DAO override seems not-great.

Instantiating rate limits

Today all rate limit quotas must be set manually by governance. In the future, we should design towards some conservative rate limit to add as a safety-backstop automatically for channels. Ideas for how this could look:

  • One month after a channel has been created, automatically add in some USDC-based rate limit
  • One month after governance incentivizes an asset, add on a per-denomination rate limit.

Definitely needs far more ideation and iteration!

Parameterizing the rate limit

One element is we don't want any rate limit timespan thats too short, e.g. not enough time for humans to react to. So we wouldn't want a 1 hour rate limit, unless we think that if its hit, it could be assessed within an hour.

Handling rate limit boundaries

We want to be safe against the case where say we have a daily rate limit ending at a given time, and an adversary attempts to attack near the boundary window. We would not like them to be able to "double extract funds" by timing their extraction near a window boundary.

Admittedly, not a lot of thought has been put into how to deal with this well. Right now we envision simply handling this by saying if you want a quota of duration D, instead include two quotas of duration D, but offset by D/2 from each other.

Ideally we can change windows to be more 'rolling' in the future, to avoid this overhead and more cleanly handle the problem. (Perhaps rolling ~1 hour at a time)

Inflow parameterization

The "Inflow" side of a rate limit is essentially protection against unforeseen bug on a counterparty chain. This can be quite conservative (e.g. bridged amount doubling in one week). This covers a few cases:

  • Counter-party chain B having a token theft attack
    • TODO: description of how this looks
  • Counter-party chain B runaway mint
    • TODO: description of how this looks
  • IBC theft
    • TODO: description of how this looks

It does get more complex when the counterparty chain is itself a DEX, but this is still much more protection than nothing.

Outflow parameterization

The "Outflow" side of a rate limit is protection against a bug on Furyans OR IBC. This has potential for much more user-frustrating issues, if set too low. E.g. if theres some event that causes many people to suddenly withdraw many STARS or many USDC.

So this parameterization has to contend with being a tradeoff of withdrawal liveness in high volatility periods vs being a crucial safety rail, in event of on-Furyans bug.

TODO: Better fill out

Example suggested parameterization

Code structure

As mentioned at the beginning of the README, the go code is a relatively minimal ICS 20 wrapper, that dispatches relevant calls to a cosmwasm contract that implements the rate limiting functionality.

Go Middleware

To achieve this, the middleware needs to implement the porttypes.Middleware interface and the porttypes.ICS4Wrapper interface. This allows the middleware to send and receive IBC messages by wrapping any IBC module, and be used as an ICS4 wrapper by a transfer module (for sending packets or writing acknowledgements).

Of those interfaces, just the following methods have custom logic:

  • ICS4Wrapper.SendPacket forwards to contract, with intent of tracking of value sent via an ibc channel
  • Middleware.OnRecvPacket forwards to contract, with intent of tracking of value received via an ibc channel
  • Middleware.OnAcknowledgementPacket forwards to contract, with intent of undoing the tracking of a sent packet if the acknowledgment is not a success
  • OnTimeoutPacket forwards to contract, with intent of undoing the tracking of a sent packet if the packet times out (is not relayed)

All other methods from those interfaces are passthroughs to the underlying implementations.

Parameters

The middleware uses the following parameters:

Key Type
ContractAddress string
  1. ContractAddress - The contract address is the address of an instantiated version of the contract provided under ./contracts/
Cosmwasm Contract Concepts

Something to keep in mind with all of the code, is that we have to reason separately about every item in the following matrix:

Native Token Non-Native Token
Send Native Token Send Non-Native Token
Receive Native Token Receive Non-Native Token
Timeout Native Send Timeout Non-native Send

(Error ACK can reuse the same code as timeout)

TODO: Spend more time on sudo messages in the following description. We need to better describe how we map the quota concepts onto the code. Need to describe how we get the quota beginning balance, and that its different for sends and receives. Explain intracacies of tracking that a timeout and/or ErrorAck must appear from the same quota, else we ignore its update to the quotas.

The tracking contract uses the following concepts

  1. RateLimit - tracks the value flow transferred and the quota for a path.
  2. Path - is a (denom, channel) pair.
  3. Flow - tracks the value that has moved through a path during the current time window.
  4. Quota - is the percentage of the denom's total value that can be transferred through the path in a given period of time (duration)
Messages

The contract specifies the following messages:

Query
  • GetQuotas - Returns the quotas for a path
Exec
  • AddPath - Adds a list of quotas for a path
  • RemovePath - Removes a path
  • ResetPathQuota - If a rate limit has been reached, the contract's governance address can reset the quota so that transfers are allowed again
Sudo

Sudo messages can only be executed by the chain.

  • SendPacket - Increments the amount used out of the send quota and checks that the send is allowed. If it isn't, it will return a RateLimitExceeded error
  • RecvPacket - Increments the amount used out of the receive quota and checks that the receive is allowed. If it isn't, it will return a RateLimitExceeded error
  • UndoSend - If a send has failed, the undo message is used to remove its cost from the send quota

All of these messages receive the packet from the chain and extract the necessary information to process the packet and determine if it should be the rate limited.

Necessary information

To determine if a packet should be rate limited, we need:

  • Channel: The channel on the Furyans side: packet.SourceChannel for sends, and packet.DestinationChannel for receives.
  • Denom: The denom of the token being transferred as known on the Furyans side (more on that bellow)
  • Channel Value: The total value of the chanel denominated in Denom (i.e.: channel-17 is worth 10k fury).
  • Funds: the amount being transferred
Notes on Channel

The contract also supports quotas on a custom channel called "any" that is checked on every transfer. If either the transfer channel or the "any" channel have a quota that has been filled, the transaction will be rate limited.

Notes on Denom

We always use the the denom as represented on Furyans. For native assets that is the local denom, and for non-native assets it's the "ibc" prefix and the sha256 hash of the denom trace (ibc/...).

Sends

For native denoms, we can just use the denom in the packet. If the denom is invalid, it will fail somewhere else along the chain. Example result: ufury

For non-native denoms, the contract needs to hash the denom trace and append it to the ibc/ prefix. The contract always receives the parsed denom (i.e.: transfer/channel-32/uatom instead of ibc/27394FB092D2ECCD56123C74F36E4C1F926001CEADA9CA97EA622B25F41E5EB2). This is because of the order in which the middleware is called. When sending a non-native denom, the packet contains transfer/source-channel/denom as it is built on the relay.SendTransfer() in the transfer module and then passed to the middleware. Example result: ibc/<hash>

Receives

This behaves slightly different if the asset is an furyan asset that was sent to the counterparty and is being returned to the chain, or if the asset is being received by the chain and originates on the counterparty. In ibc this is called being a "source" or a "sink" respectively.

If the chain is a sink for the denom, we build the local denom by prefixing the port and the channel (transfer/local-channel) and hashing that denom. Example result: ibc/<hash>

If the chain is the source for the denom, there are two possibilities:

  • The token is a native token, in which case we just remove the prefix added by the counterparty. Example result: ufury
  • The token is a non-native token, in which case we remove the extra prefix and hash it. Example result ibc/<hash>
Notes on Channel Value

We have iterated on different strategies for calculating the channel value. Our preferred strategy is the following:

  • For non-native tokens (ibc/...), the channel value should be the supply of those tokens in Furyans
  • For native tokens, the channel value should be the total amount of tokens in escrow across all ibc channels

The later ensures the limits are lower and represent the amount of native tokens that exist outside Furyans. This is beneficial as we assume the majority of native tokens exist on the native chain and the amount "normal" ibc transfers is proportional to the tokens that have left the chain.

This strategy cannot be implemented at the moment because IBC does not track the amount of tokens in escrow across all channels (github issue). Instead, we use the current supply on Furyans for all denoms (i.e.: treat native and non-native tokens the same way). Once that ticket is fixed, we will update this strategy.

Caching

The channel value varies constantly. To have better predictability, and avoid issues of the value growing if there is a potential infinite mint bug, we cache the channel value at the beginning of the period for every quota.

This means that if we have a daily quota of 1% of the fury supply, and the channel value is 1M fury at the beginning of the quota, no more than 100k fury can transferred during that day. If 10M fury were to be minted or IBC'd in during that period, the quota will not increase until the period expired. Then it will be 1% of the new channel value (~11M)

Integration

The rate limit middleware wraps the transferIBCModule and is added as the entry route for IBC transfers.

The module is also provided to the underlying transferIBCModule as its ICS4Wrapper; previously, this would have pointed to a channel, which also implements the ICS4Wrapper interface.

This integration can be seen in furyan/app/keepers/keepers.go

Testing strategy

A general testing strategy is as follows:

  • Setup two chains.
  • Send some tokens from A->B and some from B->A (so that there are IBC tokens to play with in both sides)
  • Add the rate limiter on A with low limits (i.e. 1% of supply)
  • Test Function for chains A' and B' and denom d
    • Send some d tokens from A' to B' and get close to the limit.
    • Do the same transfer making sure the amount is above the quota and verify it fails with the rate limit error
    • Wait until the reset time has passed, and send again. The transfer should now succeed
  • Repeat the above test for the following combination of chains and tokens: (A,B,a), (B,A,a), (A,B,b), (B,A,b), where a and b are native tokens to chains A and B respectively.

For more comprehensive tests we can also:

  • Add a third chain C and make sure everything works properly for C tokens that have been transferred to A and to B
  • Test that the contracts gov address can reset rate limits if the quota has been hit
  • Test the queries for getting information about the state of the quotas
  • Test that rate limit symmetries hold (i.e.: sending the a token through a rate-limited channel and then sending back reduces the rate limits by the same amount that it was increased during the first send)
  • Ensure that the channels between the test chains have different names (A->B="channel-0", B->A="channel-1", for example)

Known Future work

Items that have been highlighted above:

  • Making automated rate limits get added for channels, instead of manual configuration only
  • Improving parameterization strategies / data analysis
  • Adding the USDC based rate limits
  • We need better strategies for how rate limits "expire".

Not yet highlighted

  • Making monitoring tooling to know when approaching rate limiting and when they're hit
  • Making tooling to easily give us summaries we can use, to reason about "bug or not bug" in event of rate limit being hit
  • Enabling ways to pre-declare large transfers so as to not hit rate limits.
    • Perhaps you can on-chain declare intent to send these assets with a large delay, that raises monitoring but bypasses rate limits?
    • Maybe contract-based tooling to split up the transfer suffices?
  • Strategies to account for high volatility periods without hitting rate limits
  • Analyze changing denom-based rate limits, to just overall withdrawal amount for Furyans

Documentation

Index

Constants

This section is empty.

Variables

This section is empty.

Functions

func BuildWasmExecMsg 

func BuildWasmExecMsg(msgType string, packet exported.PacketI) ([]byte, error)

func CheckAndUpdateRateLimits 

func CheckAndUpdateRateLimits(ctx sdk.Context, contractKeeper *wasmkeeper.PermissionedKeeper,
	msgType, contract string, packet exported.PacketI,
) error

func UndoSendRateLimit 

func UndoSendRateLimit(ctx sdk.Context, contractKeeper *wasmkeeper.PermissionedKeeper,
	contract string,
	packet exported.PacketI,
) error

func ValidateReceiverAddress 

func ValidateReceiverAddress(packet exported.PacketI) error

Types

type AppModuleBasic 

type AppModuleBasic struct{}

func (AppModuleBasic) DefaultGenesis 

func (AppModuleBasic) DefaultGenesis(cdc codec.JSONCodec) json.RawMessage

func (AppModuleBasic) GetQueryCmd 

func (b AppModuleBasic) GetQueryCmd() *cobra.Command

func (AppModuleBasic) GetTxCmd 

func (b AppModuleBasic) GetTxCmd() *cobra.Command

func (AppModuleBasic) Name 

func (AppModuleBasic) Name() string

func (AppModuleBasic) RegisterGRPCGatewayRoutes 

func (b AppModuleBasic) RegisterGRPCGatewayRoutes(clientCtx client.Context, mux *runtime.ServeMux)

func (AppModuleBasic) RegisterInterfaces 

func (AppModuleBasic) RegisterInterfaces(registry codectypes.InterfaceRegistry)

RegisterInterfaces registers interfaces and implementations of the ibc-rate-limit module.

func (AppModuleBasic) RegisterLegacyAminoCodec 

func (AppModuleBasic) RegisterLegacyAminoCodec(cdc *codec.LegacyAmino)

func (AppModuleBasic) RegisterRESTRoutes 

func (b AppModuleBasic) RegisterRESTRoutes(ctx client.Context, r *mux.Router)

--------------------------------------- Interfaces.

func (AppModuleBasic) ValidateGenesis 

func (AppModuleBasic) ValidateGenesis(cdc codec.JSONCodec, config client.TxEncodingConfig, bz json.RawMessage) error

ValidateGenesis performs genesis state validation for the ibc-rate-limit module.

type IBCModule 

type IBCModule struct {
	// contains filtered or unexported fields
}

func NewIBCModule 

func NewIBCModule(app porttypes.IBCModule, ics4 *ICS4Wrapper) IBCModule

func (*IBCModule) GetAppVersion 

func (im *IBCModule) GetAppVersion(ctx sdk.Context, portID, channelID string) (string, bool)

func (*IBCModule) OnAcknowledgementPacket 

func (im *IBCModule) OnAcknowledgementPacket(
	ctx sdk.Context,
	packet channeltypes.Packet,
	acknowledgement []byte,
	relayer sdk.AccAddress,
) error

OnAcknowledgementPacket implements the IBCModule interface

func (*IBCModule) OnChanCloseConfirm 

func (im *IBCModule) OnChanCloseConfirm(
	ctx sdk.Context,
	portID,
	channelID string,
) error

OnChanCloseConfirm implements the IBCModule interface

func (*IBCModule) OnChanCloseInit 

func (im *IBCModule) OnChanCloseInit(
	ctx sdk.Context,
	portID,
	channelID string,
) error

OnChanCloseInit implements the IBCModule interface

func (*IBCModule) OnChanOpenAck 

func (im *IBCModule) OnChanOpenAck(
	ctx sdk.Context,
	portID,
	channelID string,
	counterpartyChannelID string,
	counterpartyVersion string,
) error

OnChanOpenAck implements the IBCModule interface

func (*IBCModule) OnChanOpenConfirm 

func (im *IBCModule) OnChanOpenConfirm(
	ctx sdk.Context,
	portID,
	channelID string,
) error

OnChanOpenConfirm implements the IBCModule interface

func (*IBCModule) OnChanOpenInit 

func (im *IBCModule) OnChanOpenInit(ctx sdk.Context,
	order channeltypes.Order,
	connectionHops []string,
	portID string,
	channelID string,
	channelCap *capabilitytypes.Capability,
	counterparty channeltypes.Counterparty,
	version string,
) (string, error)

OnChanOpenInit implements the IBCModule interface

func (*IBCModule) OnChanOpenTry 

func (im *IBCModule) OnChanOpenTry(
	ctx sdk.Context,
	order channeltypes.Order,
	connectionHops []string,
	portID,
	channelID string,
	channelCap *capabilitytypes.Capability,
	counterparty channeltypes.Counterparty,
	counterpartyVersion string,
) (string, error)

OnChanOpenTry implements the IBCModule interface

func (*IBCModule) OnRecvPacket 

func (im *IBCModule) OnRecvPacket(
	ctx sdk.Context,
	packet channeltypes.Packet,
	relayer sdk.AccAddress,
) exported.Acknowledgement

OnRecvPacket implements the IBCModule interface

func (*IBCModule) OnTimeoutPacket 

func (im *IBCModule) OnTimeoutPacket(
	ctx sdk.Context,
	packet channeltypes.Packet,
	relayer sdk.AccAddress,
) error

OnTimeoutPacket implements the IBCModule interface

func (*IBCModule) RevertSentPacket 

func (im *IBCModule) RevertSentPacket(
	ctx sdk.Context,
	packet exported.PacketI,
) error

RevertSentPacket Notifies the contract that a sent packet wasn't properly received

func (*IBCModule) SendPacket 

func (im *IBCModule) SendPacket(
	ctx sdk.Context,
	chanCap *capabilitytypes.Capability,
	packet exported.PacketI,
) error

SendPacket implements the ICS4 Wrapper interface

func (*IBCModule) WriteAcknowledgement 

func (im *IBCModule) WriteAcknowledgement(
	ctx sdk.Context,
	chanCap *capabilitytypes.Capability,
	packet exported.PacketI,
	ack exported.Acknowledgement,
) error

WriteAcknowledgement implements the ICS4 Wrapper interface

type ICS4Wrapper 

type ICS4Wrapper struct {
	ContractKeeper *wasmkeeper.PermissionedKeeper
	// contains filtered or unexported fields
}

func NewICS4Middleware 

func NewICS4Middleware(
	channel porttypes.ICS4Wrapper,
	accountKeeper *authkeeper.AccountKeeper, contractKeeper *wasmkeeper.PermissionedKeeper,
	bankKeeper *bankkeeper.BaseKeeper, paramSpace paramtypes.Subspace,
) ICS4Wrapper

func (*ICS4Wrapper) GetAppVersion 

func (i *ICS4Wrapper) GetAppVersion(ctx sdk.Context, portID, channelID string) (string, bool)

func (*ICS4Wrapper) GetParams 

func (i *ICS4Wrapper) GetParams(ctx sdk.Context) (contract string)

func (*ICS4Wrapper) SendPacket 

func (i *ICS4Wrapper) SendPacket(ctx sdk.Context, chanCap *capabilitytypes.Capability, packet exported.PacketI) error

SendPacket implements the ICS4 interface and is called when sending packets. This method retrieves the contract from the middleware's parameters and checks if the limits have been exceeded for the current transfer, in which case it returns an error preventing the IBC send from taking place. If the contract param is not configured, or the contract doesn't have a configuration for the (channel+denom) being used, transfers are not prevented and handled by the wrapped IBC app

func (*ICS4Wrapper) WriteAcknowledgement 

func (i *ICS4Wrapper) WriteAcknowledgement(ctx sdk.Context, chanCap *capabilitytypes.Capability, packet exported.PacketI, ack exported.Acknowledgement) error

type PacketMsg 

type PacketMsg struct {
	Packet UnwrappedPacket `json:"packet"`
}

type RecvPacketMsg 

type RecvPacketMsg struct {
	RecvPacket PacketMsg `json:"recv_packet"`
}

type SendPacketMsg 

type SendPacketMsg struct {
	SendPacket PacketMsg `json:"send_packet"`
}

type UndoPacketMsg 

type UndoPacketMsg struct {
	Packet UnwrappedPacket `json:"packet"`
}

type UndoSendMsg 

type UndoSendMsg struct {
	UndoSend UndoPacketMsg `json:"undo_send"`
}

type UnwrappedPacket 

type UnwrappedPacket struct {
	Sequence           uint64                                `json:"sequence"`
	SourcePort         string                                `json:"source_port"`
	SourceChannel      string                                `json:"source_channel"`
	DestinationPort    string                                `json:"destination_port"`
	DestinationChannel string                                `json:"destination_channel"`
	Data               transfertypes.FungibleTokenPacketData `json:"data"`
	TimeoutHeight      clienttypes.Height                    `json:"timeout_height"`
	TimeoutTimestamp   uint64                                `json:"timeout_timestamp,omitempty"`
}

Source Files

View all Source files

Directories

Path Synopsis
client
cli
Package types is a reverse proxy.
 Package types is a reverse proxy.

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.