ratelimit

package
v8.0.0 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Mar 26, 2023 License: Apache-2.0, Apache-2.0 Imports: 24 Imported by: 0

README

title: "RateLimit" excerpt: "" category: 6392913957c533007128548e

RateLimit Module

Overview

This ratelimit module is a native golang implementation, inspired by Osmosis's CosmWasm ibc-rate-limit module. The module is meant as a safety control in the event of a bug, attack, or economic failure of an external zone. It prevents massive inflows or outflows of IBC tokens to/from Stride in a short time frame. See here for an excellent summary by the Osmosis team on the motivation for rate limiting.

Each rate limit is applied at a ChannelID + Denom granularity and is evaluated in evenly spaced fixed windows. For instance, a rate limit might be specified on uosmo (denominated as ibc/D24B4564BCD51D3D02D9987D92571EAC5915676A9BD6D9B0C1D0254CB8A5EA34 on Stride), on the Stride <-> Osmosis transfer channel (channel-5), with a 24 hour window.

Each rate limit will also have a configurable threshold that dictates the max inflow/outflow along the channel. The threshold is represented as a percentage of the total value along the channel. The channel value is calculated by querying the total supply of the denom at the start of the time window, and it remains constant until the window expires. For instance, the rate limit described above might have a threshold of 10% for both inflow and outflow. If the total supply of ibc/D24B4564BCD51D3D02D9987D92571EAC5915676A9BD6D9B0C1D0254CB8A5EA34 was 100, then any transfer that would cause a net inflow or outflow greater than 10 (i.e. greater than 10% the channel value) would be rejected. Once the time window expires, the net inflow and outflow are reset to 0 and the channel value is re-calculated.

The net inflow and outflow is used (rather than the total inflow/outflow) to prevent DOS attacks where someone repeatedly sends the same token back and forth across the same channel, causing the rate limit to be reached.

The module is implemented as IBC Middleware around the transfer module. The epoch's module is leveraged to determine when each rate limit window has expired (each window is denominated in hours). This means all rate limit windows with the same window duration will start and end at the same time.

Implementation

Each rate limit is defined by the following three components:

  1. Path: Defines the ChannelId and Denom
  2. Quota: Defines the rate limit time window (DurationHours) and the max threshold for inflows/outflows (MaxPercentRecv and MaxPercentSend respectively)
  3. Flow: Stores the current Inflow, Outflow and ChannelValue. Each time a quota expires, the inflow and outflow get reset to 0 and the channel value gets recalculated. Throughout the window, the inflow and outflow each increase monotonically. The net flow is used when determining if a transfer would exceed the quota.
    • For Send packets: $$\text{Exceeds Quota if:} \left(\frac{\text{Outflow} - \text{Inflow} + \text{Packet Amount}}{\text{ChannelValue}}\right) > \text{MaxPercentSend}$$
    • For Receive packets: $$\text{Exceeds Quota if:} \left(\frac{\text{Inflow} - \text{Outflow} + \text{Packet Amount}}{\text{ChannelValue}}\right) > \text{MaxPercentRecv}$$

Example Walk-Through

Using the example above, let's say we created a 24 hour rate limit on ibc/D24B4564BCD51D3D02D9987D92571EAC5915676A9BD6D9B0C1D0254CB8A5EA34 ("ibc/uosmo"), channel-5, with a 10% send and receive threshold.

  1. At the start of the window, the supply will be queried, to determine the channel value. Let's say the total supply was 100
  2. If someone transferred 8uosmo from Osmosis -> Stride, the Inflow would increment by 8
  3. If someone tried to transfer another 8uosmo from Osmosis -> Stride, it would exceed the quota since (8+8)/100 = 16% (which is greater than 10%) and thus, the transfer would be rejected.
  4. If someone tried to transfer 12ibc/uosmo from Stride -> Osmosis, the Outflow would increment by 12. Notice, even though 12 is greater than 10% the total channel value, the net outflow is only 4uatom (since it's offset by the 8uatom Inflow). As a result, this transaction would succeed.
  5. Now if the person in (3) attempted to retry their transfer of8uosmo from Osmosis -> Stride, the Inflow would increment by 8 and the transaction would succeed (leaving a net inflow of 4).
  6. Finally, at the end of the 24 hours, the Inflow and Outflow would get reset to 0 and the ChannelValue would be re-calculated. In this example, the new channel value would be 104 (since more uosmo was sent to Stride, and thus more ibc/uosmo was minted)
Step Description Transfer Status Inflow Outflow Net Inflow Net Outflow Channel Value
1 Rate limit created 0 0 100
2 8usomo Osmosis → Stride Successful 8 0 8% 100
3 8usomo Osmosis → Stride Rejected 16 0 16% (>10%) 100
3 State reverted after rejected Tx 8 0 8% 100
4 12ibc/uosmo Stride → Osmosis Successful 8 12 4% 100
5 8usomo Osmosis → Stride Successful 16 12 4% 100
6 Quota Reset 0 0 104

Denom Blacklist

The module also contains a blacklist to completely halt all IBC transfers for a given denom. There are keeper functions to add or remove denoms from the blacklist; however, these functions are not exposed externally through transactions or governance, and they should only be leveraged internally from the protocol in extreme scenarios.

Denoms

We always want to refer to the channel ID and denom as they appear on Stride. For instance, in the example above, we would store the rate limit with denom ibc/D24B4564BCD51D3D02D9987D92571EAC5915676A9BD6D9B0C1D0254CB8A5EA34 and channel-5, instead of uosmo and channel-326 (the ChannelID on Osmosis).

However, since the ratelimit module acts as middleware to the transfer module, the respective denoms need to be interpreted using the denom trace associated with each packet. There are a few scenarios at play here...

Send Packets

The denom that the rate limiter will use for a send packet depends on whether it was a native token (e.g. ustrd, stuatom, etc.) or non-native token (e.g. ibc/...)...

Native vs Non-Native
  • We can identify if the token is native or not by parsing the denom trace from the packet
    • If the token is native, it will not have a prefix (e.g. ustrd)
    • If the token is non-native, it will have a prefix (e.g. transfer/channel-X/uosmo)
Determining the denom in the rate limit
  • For native tokens, return as is (e.g. ustrd)
  • For non-native tokens, take the ibc hash (e.g. hash transfer/channel-X/uosmo into ibc/...)

Receive Packets

The denom that the rate limiter will use for a receive packet depends on whether it was a source or sink.

Source vs Sink

As a token travels across IBC chains, its path is recorded in the denom trace.

  • Sink: If the token moves forward, to a chain different than its previous hop, the destination chain acts as a sink zone, and the new port and channel are appended to the denom trace.
    • Ex1: uatom is sent from Cosmoshub to Stride
      • Stride is the first destination for uatom, and acts as a sink zone
      • The IBC denom becomes the hash of: /{stride-port)/{stride-channel}/uatom
    • Ex2: uatom is sent from Cosmoshub to Osmosis then to Stride
      • Here the receiving chain (Stride) is not the same as the previous hop (Cosmoshub), so Stride, once again, is acting as a sink zone
      • The IBC denom becomes the hash of: /{stride-port)/{stride-channel}/{osmosis-port}/{osmosis-channel}/uatom
  • Source: If the token moves backwards (i.e. revisits the last chain it was sent from), the destination chain is acting as a source zone, and the port and channel are removed from the denom trace - undoing the last hop. Should a token reverse its course completely and head back along the same path to its native chain, the denom trace will unwind and reduce back down to the original base denom.
    • Ex1: ustrd is sent from Stride to Osmosis, and then back to Stride
      • Here the trace reduces from /{osmosis-port}/{osmosis-channel}/ustrd to simply ustrd
    • Ex2: ujuno is sent to Stride, then to Osmosis, then back to Stride
      • Here the trace reduces from /{osmosis-port}/{osmosis-channel}/{stride-port}/{stride-channel}/ujuno to just /{stride-port}/{stride-channel}/ujuno (the Osmosis hop is removed)
    • Stride is the source in the examples above because the token went back and forth from Stride -> Osmosis -> Stride

For a more detailed explanation, see the ICS-20 ADR and spec.

Determining the denom in the rate limit

  • If the chain is acting as a Sink: Add on the Stride port and channel and hash it

    • Ex1: uosmo sent from Osmosis to Stride

      • Packet Denom Trace: uosmo
      • (1) Add Stride Channel as Prefix: transfer/channel-X/uosmo
      • (2) Hash: ibc/...

    • Ex2: ujuno sent from Osmosis to Stride

      • Packet Denom Trace: transfer/channel-Y/ujuno (where channel-Y is the Juno <> Osmosis channel)
      • (1) Add Stride Channel as Prefix: transfer/channel-X/transfer/channel-Y/ujuno
      • (2) Hash: ibc/...

  • If the chain is acting as a Source: First, remove the prefix. Then if there is still a trace prefix, hash it

    • Ex1: ustrd sent back to Stride from Osmosis
      • Packet Denom: transfer/channel-X/ustrd
      • (1) Remove Prefix: ustrd
      • (2) No trace remaining, leave as is: ustrd
    • Ex2: juno was sent to Stride, then to Osmosis, then back to Stride
      • Packet Denom: transfer/channel-X/transfer/channel-Z/ujuno
      • (1) Remove Prefix: transfer/channel-Z/ujuno
      • (2) Hash: ibc/...

State

RateLimit
    Path
        Denom string
        ChannelId string
    Quota
        MaxPercentSend sdkmath.Int
        MaxPercentRecv sdkmath.Int
        DurationHours uint64
    Flow
        Inflow sdkmath.Int
        Outflow sdkmath.Int
        ChannelValue sdkmath.Int

Keeper functions

// Stores a RateLimit object in the store
SetRateLimit(rateLimit types.RateLimit)

// Removes a RateLimit object from the store
RemoveRateLimit(denom string, channelId string)

// Reads a RateLimit object from the store
GetRateLimit(denom string, channelId string)

// Gets a list of all RateLimit objects
GetAllRateLimits()

// Resets the Inflow and Outflow of a RateLimit and re-calculates the ChannelValue
ResetRateLimit(denom string, channelId string)

// Checks whether a packet will exceed a rate limit quota
// If it does not exceed the quota, it updates the `Inflow` or `Outflow`
// If it exceeds the quota, it returns an error
CheckRateLimitAndUpdateFlow(direction types.PacketDirection, denom string, channelId string, amount sdkmath.Int)

Middleware Functions

SendRateLimitedPacket (ICS4Wrapper SendPacket)
ReceiveRateLimitedPacket (IBCModule OnRecvPacket)

Transactions (via Governance)

// Adds a new rate limit
// Errors if:
//   - `ChannelValue` is 0 (meaning supply of the denom is 0)
//   - Rate limit already exists (as identified by the `channel_id` and `denom`)
//   - Channel does not exist
AddRateLimit()
{"denom": string, "channel_id": string, "duration_hours": string, "max_percent_send": string, "max_percent_recv": string}

// Updates a rate limit quota, and resets the rate limit
// Errors if:
//   - Rate limit does not exist (as identified by the `channel_id` and `denom`)
UpdateRateLimit()
{"denom": string, "channel_id": string, "duration_hours": string, "max_percent_send": string, "max_percent_recv": string}

// Resets the `Inflow` and `Outflow` of a rate limit to 0, and re-calculates the `ChannelValue`
// Errors if:
//   - Rate limit does not exist (as identified by the `channel_id` and `denom`)
ResetRateLimit()
{"denom": string, "channel_id": string}

// Removes the rate limit from the store
// Errors if:
//   - Rate limit does not exist (as identified by the `channel_id` and `denom`)
RemoveRateLimit()
{"denom": string, "channel_id": string}

Queries

// Queries all rate limits
//   CLI:
//      strided q ratelimit list-rate-limits
//   API:
//      /Stride-Labs/stride/ratelimit/ratelimits
QueryRateLimits()

// Queries a specific rate limit given a ChannelID and Denom
//   CLI:
//      strided q ratelimit rate-limit [denom] [channel-id]
//   API:
//      /Stride-Labs/stride/ratelimit/ratelimit/{denom}/{channel_id}
QueryRateLimit(denom string, channelId string)

// Queries all rate limits associated with a given host chain
//   CLI:
//      strided q ratelimit rate-limits-by-chain [chain-id]
//   API:
//      /Stride-Labs/stride/ratelimit/ratelimits/{chain_id}
QueryRateLimitsByChainId(chainId string)

Documentation

Index

Constants

This section is empty.

Variables

This section is empty.

Functions

func ExportGenesis 

func ExportGenesis(ctx sdk.Context, k keeper.Keeper) *types.GenesisState

ExportGenesis returns the capability module's exported genesis.

func InitGenesis 

func InitGenesis(ctx sdk.Context, k keeper.Keeper, genState types.GenesisState)

InitGenesis initializes the capability module's state from a provided genesis state.

func NewMessageHandler 

func NewMessageHandler(k keeper.Keeper) sdk.Handler

NewMessageHandler returns ratelimit module messages

func NewRateLimitProposalHandler 

func NewRateLimitProposalHandler(k keeper.Keeper, channelKeeper channelkeeper.Keeper) govtypes.Handler

NewRateLimitProposalHandler returns ratelimit module's proposals

Types

type AppModule 

type AppModule struct {
	AppModuleBasic
	// contains filtered or unexported fields
}

AppModule implements the AppModule interface for the capability module.

func NewAppModule 

func NewAppModule(
	cdc codec.Codec,
	keeper keeper.Keeper,
) AppModule

func (AppModule) BeginBlock 

func (am AppModule) BeginBlock(_ sdk.Context, _ abci.RequestBeginBlock)

BeginBlock executes all ABCI BeginBlock logic respective to the capability module.

func (AppModule) ConsensusVersion 

func (AppModule) ConsensusVersion() uint64

ConsensusVersion implements ConsensusVersion.

func (AppModule) EndBlock 

func (am AppModule) EndBlock(_ sdk.Context, _ abci.RequestEndBlock) []abci.ValidatorUpdate

EndBlock executes all ABCI EndBlock logic respective to the capability module. It returns no validator updates.

func (AppModule) ExportGenesis 

func (am AppModule) ExportGenesis(ctx sdk.Context, cdc codec.JSONCodec) json.RawMessage

ExportGenesis returns the capability module's exported genesis state as raw JSON bytes.

func (AppModule) InitGenesis 

func (am AppModule) InitGenesis(ctx sdk.Context, cdc codec.JSONCodec, gs json.RawMessage) []abci.ValidatorUpdate

InitGenesis performs the capability module's genesis initialization It returns no validator updates.

func (AppModule) LegacyQuerierHandler 

func (am AppModule) LegacyQuerierHandler(legacyQuerierCdc *codec.LegacyAmino) sdk.Querier

LegacyQuerierHandler returns the capability module's Querier.

func (AppModule) Name 

func (am AppModule) Name() string

Name returns the capability module's name.

func (AppModule) QuerierRoute 

func (AppModule) QuerierRoute() string

QuerierRoute returns the capability module's query routing key.

func (AppModule) RegisterInvariants 

func (am AppModule) RegisterInvariants(_ sdk.InvariantRegistry)

RegisterInvariants registers the capability module's invariants.

func (AppModule) RegisterServices 

func (am AppModule) RegisterServices(cfg module.Configurator)

RegisterServices registers a GRPC query service to respond to the module-specific GRPC queries.

func (AppModule) Route 

func (am AppModule) Route() sdk.Route

Route returns the capability module's message routing key.

type AppModuleBasic 

type AppModuleBasic struct {
	// contains filtered or unexported fields
}

AppModuleBasic implements the AppModuleBasic interface for the capability module.

func NewAppModuleBasic 

func NewAppModuleBasic(cdc codec.BinaryCodec) AppModuleBasic

func (AppModuleBasic) DefaultGenesis 

func (AppModuleBasic) DefaultGenesis(cdc codec.JSONCodec) json.RawMessage

DefaultGenesis returns the capability module's default genesis state.

func (AppModuleBasic) GetQueryCmd 

func (AppModuleBasic) GetQueryCmd() *cobra.Command

GetQueryCmd returns the capability module's root query command.

func (AppModuleBasic) GetTxCmd 

func (a AppModuleBasic) GetTxCmd() *cobra.Command

GetTxCmd returns the capability module's root tx command.

func (AppModuleBasic) Name 

func (AppModuleBasic) Name() string

Name returns the capability module's name.

func (AppModuleBasic) RegisterCodec 

func (AppModuleBasic) RegisterCodec(cdc *codec.LegacyAmino)

func (AppModuleBasic) RegisterGRPCGatewayRoutes 

func (AppModuleBasic) RegisterGRPCGatewayRoutes(clientCtx client.Context, mux *runtime.ServeMux)

RegisterGRPCGatewayRoutes registers the gRPC Gateway routes for the module.

func (AppModuleBasic) RegisterInterfaces 

func (a AppModuleBasic) RegisterInterfaces(reg cdctypes.InterfaceRegistry)

RegisterInterfaces registers the module's interface types

func (AppModuleBasic) RegisterLegacyAminoCodec 

func (AppModuleBasic) RegisterLegacyAminoCodec(cdc *codec.LegacyAmino)

func (AppModuleBasic) RegisterRESTRoutes 

func (AppModuleBasic) RegisterRESTRoutes(clientCtx client.Context, rtr *mux.Router)

RegisterRESTRoutes registers the capability module's REST service handlers.

func (AppModuleBasic) ValidateGenesis 

func (AppModuleBasic) ValidateGenesis(cdc codec.JSONCodec, config client.TxEncodingConfig, bz json.RawMessage) error

ValidateGenesis performs genesis state validation for the capability module.

type IBCMiddleware 

type IBCMiddleware struct {
	// contains filtered or unexported fields
}

func NewIBCMiddleware 

func NewIBCMiddleware(k keeper.Keeper, app porttypes.IBCModule) IBCMiddleware

func (IBCMiddleware) GetAppVersion 

func (i IBCMiddleware) GetAppVersion(ctx sdk.Context, portID, channelID string) (string, bool)

GetAppVersion returns the application version of the underlying application

func (IBCMiddleware) OnAcknowledgementPacket 

func (im IBCMiddleware) OnAcknowledgementPacket(
	ctx sdk.Context,
	packet channeltypes.Packet,
	acknowledgement []byte,
	relayer sdk.AccAddress,
) error

OnAcknowledgementPacket implements the IBCMiddleware interface

func (IBCMiddleware) OnChanCloseConfirm 

func (im IBCMiddleware) OnChanCloseConfirm(
	ctx sdk.Context,
	portID,
	channelID string,
) error

OnChanCloseConfirm implements the IBCMiddleware interface

func (IBCMiddleware) OnChanCloseInit 

func (im IBCMiddleware) OnChanCloseInit(
	ctx sdk.Context,
	portID,
	channelID string,
) error

OnChanCloseInit implements the IBCMiddleware interface

func (IBCMiddleware) OnChanOpenAck 

func (im IBCMiddleware) OnChanOpenAck(
	ctx sdk.Context,
	portID,
	channelID string,
	counterpartyChannelID string,
	counterpartyVersion string,
) error

OnChanOpenAck implements the IBCMiddleware interface

func (IBCMiddleware) OnChanOpenConfirm 

func (im IBCMiddleware) OnChanOpenConfirm(
	ctx sdk.Context,
	portID,
	channelID string,
) error

OnChanOpenConfirm implements the IBCMiddleware interface

func (IBCMiddleware) OnChanOpenInit 

func (im IBCMiddleware) OnChanOpenInit(ctx sdk.Context,
	order channeltypes.Order,
	connectionHops []string,
	portID string,
	channelID string,
	channelCap *capabilitytypes.Capability,
	counterparty channeltypes.Counterparty,
	version string,
) (string, error)

OnChanOpenInit implements the IBCMiddleware interface

func (IBCMiddleware) OnChanOpenTry 

func (im IBCMiddleware) OnChanOpenTry(
	ctx sdk.Context,
	order channeltypes.Order,
	connectionHops []string,
	portID,
	channelID string,
	channelCap *capabilitytypes.Capability,
	counterparty channeltypes.Counterparty,
	counterpartyVersion string,
) (string, error)

OnChanOpenTry implements the IBCMiddleware interface

func (IBCMiddleware) OnRecvPacket 

func (im IBCMiddleware) OnRecvPacket(
	ctx sdk.Context,
	packet channeltypes.Packet,
	relayer sdk.AccAddress,
) exported.Acknowledgement

OnRecvPacket implements the IBCMiddleware interface

func (IBCMiddleware) OnTimeoutPacket 

func (im IBCMiddleware) OnTimeoutPacket(
	ctx sdk.Context,
	packet channeltypes.Packet,
	relayer sdk.AccAddress,
) error

OnTimeoutPacket implements the IBCMiddleware interface

func (IBCMiddleware) SendPacket 

func (im IBCMiddleware) SendPacket(
	ctx sdk.Context,
	chanCap *capabilitytypes.Capability,
	packet exported.PacketI,
) error

SendPacket implements the ICS4 Wrapper interface Rate-limited SendPacket found in RateLimit Keeper

func (IBCMiddleware) WriteAcknowledgement 

func (im IBCMiddleware) WriteAcknowledgement(
	ctx sdk.Context,
	chanCap *capabilitytypes.Capability,
	packet exported.PacketI,
	ack exported.Acknowledgement,
) error

WriteAcknowledgement implements the ICS4 Wrapper interface

Source Files

View all Source files

Directories

Path Synopsis
cli
gov
Package types is a reverse proxy.
 Package types is a reverse proxy.

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.