devgas

package
v2.0.0-rc.14 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Nov 18, 2024 License: Apache-2.0 Imports: 19 Imported by: 0

README

devgas

The devgas module of Nibiru Chain shares contract execution fees with smart contract developers.

This aims to increase the adoption of Nibiru by offering CosmWasm smart contract developers a direct source of income based on usage. Developers can register their smart contracts and every time someone interacts with a registered smart contract, the contract deployer or their assigned withdrawal account receives a part of the transaction fees.

Table of Contents

Register a Contract Withdrawal Address

nibid tx devgas register [contract_bech32] [withdraw_bech32] --from [key]

Registers the withdrawal address for the given contract.

Register Args

contract_bech32 (string, required): The bech32 address of the contract whose interaction fees will be shared.

withdraw_bech32 (string, required): The bech32 address where the interaction fees will be sent every block.

Description

This command registers the withdrawal address for the given contract. Any time a user interacts with your contract, the funds will be sent to the withdrawal address. It can be any valid address, such as a DAO, normal account, another contract, or a multi-sig.

Permissions

This command can only be run by the admin of the contract. If there is no admin, then it can only be run by the contract creator.

Exceptions

  • withdraw_bech32 can not be the community pool (distribution) address. This is a limitation of the way the SDK handles this module account

  • For contracts created or administered by a contract factory, the withdrawal address can only be the same as the contract address. This can be registered by anyone, but it's unchangeable. This is helpful for SubDAOs or public goods to save fees in the treasury.

If you create a contract like this, it's best to create an execution method for withdrawing fees to an account. To do this, you'll need to save the withdrawal address in the contract's state before uploading a non-migratable contract.

Update a Contract's Withdrawal Address

This can be changed at any time so long as you are still the admin or creator of a contract with the command:

nibid tx devgas update [contract] [new_withdraw_address]
Update Exception

This can not be done if the contract was created from or is administered by another contract (a contract factory). There is not currently a way for a contract to change its own withdrawal address directly.

Concepts

FeeShare

The DevGas (x/devgas) module is a revenue-per-gas model, which allows developers to get paid for deploying their decentralized applications (dApps) on Nibiru. This helps developers to generate revenue every time a user invokes their contracts to execute a transaction on the chain.

This registration is permissionless to sign up for and begin earning fees from. By default, 50% of all gas fees for Execute Messages are shared. This can be changed by governance and implemented by the x/devgas module.

Registration

Developers register their contract applications to gain their cut of fees per execution. Any contract can be registered by a developer by submitting a signed transaction. After the transaction is executed successfully, the developer will start receiving a portion of the transaction fees paid when a user interacts with the registered contract. The developer can have the funds sent to their wallet, a DAO, or any other wallet address on the Nibiru.

::: tip NOTE: If your contract is part of a development project, please ensure that the deployer of the contract (or the factory/DAO that deployed the contract) is an account that is owned by that project. This avoids the situation, that an individual deployer who leaves your project could become malicious. :::

Fee Distribution

As described above, developers will earn a portion of the transaction fee after registering their contracts. To understand how transaction fees are distributed, we will look at the following in detail:

WASM Transaction Fees

Users pay transaction fees to pay to interact with smart contracts on Nibiru. When a transaction is executed, the entire fee amount (gas limit * gas price) is sent to the FeeCollector module account during the Cosmos SDK AnteHandler execution.

After this step, the FeeCollector sends 50% of the funds and splits them between contracts that were executed on the transaction. If the fees paid are not accepted by governance, there is no payout to the developers (for example, niche base tokens) for tax purposes. If a user sends a message and it does not interact with any contracts (ex: bankSend), then the entire fee is sent to the FeeCollector as expected.

State

The x/devgas module keeps the following objects in the state:

State Object Description Key Value Store
FeeShare Fee split bytecode []byte{1} + []byte(contract_address) []byte{feeshare} KV
DeployerFeeShares Contract by deployer address bytecode []byte{2} + []byte(deployer_address) + []byte(contract_address) []byte{1} KV
FeeSharesByWithdrawer Contract by withdraw address bytecode []byte{3} + []byte(withdraw_address) + []byte(contract_address) []byte{1} KV
State: FeeShare

A FeeShare defines an instance that organizes fee distribution conditions for the owner of a given smart contract

type FeeShare struct {
  // contract_address is the bech32 address of a registered contract in string form
  ContractAddress string `protobuf:"bytes,1,opt,name=contract_address,json=contractAddress,proto3" json:"contract_address,omitempty"`
  // deployer_address is the bech32 address of message sender. It must be the
  // same as the contracts admin address.
  DeployerAddress string `protobuf:"bytes,2,opt,name=deployer_address,json=deployerAddress,proto3" json:"deployer_address,omitempty"`
  // withdrawer_address is the bech32 address of account receiving the
  // transaction fees.
  WithdrawerAddress string `protobuf:"bytes,3,opt,name=withdrawer_address,json=withdrawerAddress,proto3" json:"withdrawer_address,omitempty"`
}
State: ContractAddress

ContractAddress defines the contract address that has been registered for fee distribution.

DeployerAddress

A DeployerAddress is the admin address for a registered contract.

WithdrawerAddress

The WithdrawerAddress is the address that receives transaction fees for a registered contract.

Genesis State

The x/devgas module's GenesisState defines the state necessary for initializing the chain from a previously exported height. It contains the module parameters and the fee share for registered contracts:

// GenesisState defines the module's genesis state.
type GenesisState struct {
  // module parameters
  Params Params `protobuf:"bytes,1,opt,name=params,proto3" json:"params"`
  // active registered contracts for fee distribution
  FeeShares []FeeShare `protobuf:"bytes,2,rep,name=feeshares,json=feeshares,proto3" json:"feeshares"`
}

State Transitions

The x/devgas module allows for three types of state transitions: RegisterFeeShare, UpdateFeeShare and CancelFeeShare. The logic for distributing transaction fees is handled through the Ante handler.

Register Fee Share

A developer registers a contract for receiving transaction fees by defining the contract address and the withdrawal address for fees to be paid too. If this is not set, the developer can not get income from the contract. This is opt-in for tax purposes. When registering for fees to be paid, you MUST be the admin of said wasm contract. The withdrawal address can be the same as the contract's address if you so choose.

  1. User submits a RegisterFeeShare to register a contract address, along with a withdrawal address that they would like to receive the fees to
  2. Check if the following conditions pass:
    1. x/devgas module is enabled via Governance
    2. the contract was not previously registered
    3. deployer has a valid account (it has done at least one transaction)
    4. the contract address exists
    5. the deployer signing the transaction is the admin of the contract
    6. the contract is already deployed
  3. Store an instance of the provided share.

All transactions sent to the registered contract occurring after registration will have their fees distributed to the developer, according to the global DeveloperShares parameter in governance.

Update Fee Split

A developer updates the withdraw address for a registered contract, defining the contract address and the new withdraw address.

  1. The user submits a UpdateFeeShare
  2. Check if the following conditions pass:
    1. x/devgas module is enabled
    2. the contract is registered
    3. the signer of the transaction is the same as the contract admin per the WasmVM
  3. Update the fee with the new withdrawal address.

After this update, the developer receives the fees on the new withdrawal address.

Cancel Fee Split

A developer cancels receiving fees for a registered contract, defining the contract address.

  1. The user submits a CancelFeeShare
  2. Check if the following conditions pass:
    1. x/devgas module is enabled
    2. the contract is registered
    3. the signer of the transaction is the same as the contract admin per the WasmVM
  3. Remove share from storage

The developer no longer receives fees from transactions sent to this contract. All fees go to the community.

TxMsgs - devgas

This section defines the sdk.Msg concrete types that result in the state transitions defined on the previous section.

MsgRegisterFeeShare

Defines a transaction signed by a developer to register a contract for transaction fee distribution. The sender must be an EOA that corresponds to the contract deployer address.

type MsgRegisterFeeShare struct {
  // contract_address in bech32 format
  ContractAddress string `protobuf:"bytes,1,opt,name=contract_address,json=contractAddress,proto3" json:"contract_address,omitempty"`
  // deployer_address is the bech32 address of message sender. It must be the
  // same the contract's admin address
  DeployerAddress string `protobuf:"bytes,2,opt,name=deployer_address,json=deployerAddress,proto3" json:"deployer_address,omitempty"`
  // withdrawer_address is the bech32 address of account receiving the
  // transaction fees
  WithdrawerAddress string `protobuf:"bytes,3,opt,name=withdrawer_address,json=withdrawerAddress,proto3" json:"withdrawer_address,omitempty"`
}

The message content stateless validation fails if:

  • Contract bech32 address is invalid
  • Deployer bech32 address is invalid
  • Withdraw bech32 address is invalid
MsgUpdateFeeShare

Defines a transaction signed by a developer to update the withdraw address of a contract registered for transaction fee distribution. The sender must be the admin of the contract.

type MsgUpdateFeeShare struct {
  // contract_address in bech32 format
  ContractAddress string `protobuf:"bytes,1,opt,name=contract_address,json=contractAddress,proto3" json:"contract_address,omitempty"`
  // deployer_address is the bech32 address of message sender. It must be the
  // same the contract's admin address
  DeployerAddress string `protobuf:"bytes,2,opt,name=deployer_address,json=deployerAddress,proto3" json:"deployer_address,omitempty"`
  // withdrawer_address is the bech32 address of account receiving the
  // transaction fees
  WithdrawerAddress string `protobuf:"bytes,3,opt,name=withdrawer_address,json=withdrawerAddress,proto3" json:"withdrawer_address,omitempty"`
}

The message content stateless validation fails if:

  • Contract bech32 address is invalid
  • Deployer bech32 address is invalid
  • Withdraw bech32 address is invalid
MsgCancelFeeShare

Defines a transaction signed by a developer to remove the information for a registered contract. Transaction fees will no longer be distributed to the developer for this smart contract. The sender must be an admin that corresponds to the contract.

type MsgCancelFeeShare struct {
  // contract_address in bech32 format
  ContractAddress string `protobuf:"bytes,1,opt,name=contract_address,json=contractAddress,proto3" json:"contract_address,omitempty"`
  // deployer_address is the bech32 address of message sender. It must be the
  // same the contract's admin address
  DeployerAddress string `protobuf:"bytes,2,opt,name=deployer_address,json=deployerAddress,proto3" json:"deployer_address,omitempty"`
}

The message content stateless validation fails if:

  • Contract bech32 address is invalid
  • Contract bech32 address is zero
  • Deployer bech32 address is invalid

Ante

The fees module uses the ante handler to distribute fees between developers and the community.

Handling

An Ante Decorator executes custom logic after each successful WasmExecuteMsg transaction. All fees paid by a user for transaction execution are sent to the FeeCollector module account during the AnteHandler execution before being redistributed to the registered contract developers.

If the x/devgas module is disabled or the Wasm Execute Msg transaction targets an unregistered contract, the handler returns nil, without performing any actions. In this case, 100% of the transaction fees remain in the FeeCollector module, to be distributed elsewhere.

If the x/devgas module is enabled and a Wasm Execute Msg transaction targets a registered contract, the handler sends a percentage of the transaction fees (paid by the user) to the withdraw address set for that contract.

  1. The user submits an Execute transaction (MsgExecuteContract) to a smart contract and the transaction is executed successfully
  2. Check if
    • fees module is enabled
    • the smart contract is registered to receive fee split
  3. Calculate developer fees according to the DeveloperShares parameter.
  4. Check what fees governance allows to be paid in
  5. Check which contracts the user executed that also have been registered.
  6. Calculate the total amount of fees to be paid to the developer(s). If multiple, split the 50% between all registered withdrawal addresses.
  7. Distribute the remaining amount in the FeeCollector to validators according to the SDK Distribution Scheme.

Events

The x/devgas module emits the following events:

Event: Register Fee Split
Type Attribute Key Attribute Value
register_feeshare "contract" {msg.ContractAddress}
register_feeshare "sender" {msg.DeployerAddress}
register_feeshare "withdrawer_address" {msg.WithdrawerAddress}
Event: Update Fee Split
Type Attribute Key Attribute Value
update_feeshare "contract" {msg.ContractAddress}
update_feeshare "sender" {msg.DeployerAddress}
update_feeshare "withdrawer_address" {msg.WithdrawerAddress}
Event: Cancel Fee Split
Type Attribute Key Attribute Value
cancel_feeshare "contract" {msg.ContractAddress}
cancel_feeshare "sender" {msg.DeployerAddress}

Module Parameters

The fee Split module contains the following parameters:

Key Type Default Value
EnableFeeShare bool true
DeveloperShares sdk.Dec 50%
AllowedDenoms []string{} []string(nil)

Enable FeeShare Module

The EnableFeeShare parameter toggles all state transitions in the module. When the parameter is disabled, it will prevent any transaction fees from being distributed to contract deplorers and it will disallow contract registrations, updates or cancellations.

Developer Shares Amount

The DeveloperShares parameter is the percentage of transaction fees that are sent to the contract deplorers.

Allowed Denominations

The AllowedDenoms parameter is used to specify which fees coins will be paid to contract developers. If this is empty, all fees paid will be split. If not, only fees specified here will be paid out to the withdrawal address.

Clients

Command Line Interface

Find below a list of nibid commands added with the x/devgas module. You can obtain the full list by using the nibid -h command. A CLI command can look like this:

nibid query feeshare params
Queries
Command Subcommand Description
query feeshare params Get devgas params
query feeshare contract Get the devgas for a given contract
query feeshare contracts Get all feeshares
query feeshare deployer-contracts Get all feeshares of a given deployer
query feeshare withdrawer-contracts Get all feeshares of a given withdrawer
Transactions
Command Subcommand Description
tx feeshare register Register a contract for receiving devgas
tx feeshare update Update the withdraw address for a contract
tx feeshare cancel Remove the devgas for a contract

gRPC Queries

Verb Method Description
gRPC nibiru.devgas.v1.Query/Params Get devgas params
gRPC nibiru.devgas.v1.Query/FeeShare Get the devgas for a given contract
gRPC nibiru.devgas.v1.Query/FeeShares Get all feeshares
gRPC nibiru.devgas.v1.Query/DeployerFeeShares Get all feeshares of a given deployer
gRPC nibiru.devgas.v1.Query/FeeSharesByWithdrawer Get all feeshares of a given withdrawer
GET /nibiru.devgas/v1/params Get devgas params
GET /nibiru.devgas/v1/feeshares/{contract_address} Get the devgas for a given contract
GET /nibiru.devgas/v1/feeshares Get all feeshares
GET /nibiru.devgas/v1/feeshares/{deployer_address} Get all feeshares of a given deployer
GET /nibiru.devgas/v1/feeshares/{withdraw_address} Get all feeshares of a given withdrawer
gRPC Transactions
Verb Method Description
gRPC nibiru.devgas.v1.Msg/RegisterFeeShare Register a contract for receiving devgas
gRPC nibiru.devgas.v1.Msg/UpdateFeeShare Update the withdraw address for a contract
gRPC nibiru.devgas.v1.Msg/CancelFeeShare Remove the devgas for a contract
POST /nibiru.devgas/v1/tx/register_feeshare Register a contract for receiving devgas
POST /nibiru.devgas/v1/tx/update_feeshare Update the withdraw address for a contract
POST /nibiru.devgas/v1/tx/cancel_feeshare Remove the devgas for a contract

Credits: Evmos and Juno

"This module is a heavily modified fork of evmos/x/revenue" - Juno Network

This module is a heavily modified fork of Juno's heavily modified fork. 🙃

Documentation

Index

Constants

View Source 
const ConsensusVersion = 1

ConsensusVersion defines the current module consensus version.

Variables

This section is empty.

Functions

func ExportGenesis 

func ExportGenesis(ctx sdk.Context, k keeper.Keeper) *types.GenesisState

ExportGenesis export module state

func InitGenesis 

func InitGenesis(
	ctx sdk.Context,
	k keeper.Keeper,
	data types.GenesisState,
)

InitGenesis import module genesis

Types

type AppModule 

type AppModule struct {
	AppModuleBasic
	// contains filtered or unexported fields
}

AppModule implements the AppModule interface for the fees module.

func NewAppModule 

func NewAppModule(
	k keeper.Keeper,
	ak authkeeper.AccountKeeper,
	ss exported.Subspace,
) AppModule

NewAppModule creates a new AppModule Object

func (AppModule) BeginBlock 

func (am AppModule) BeginBlock(_ sdk.Context, _ abci.RequestBeginBlock)

BeginBlock executes all ABCI BeginBlock logic respective to the fees module.

func (AppModule) EndBlock 

func (am AppModule) EndBlock(_ sdk.Context, _ abci.RequestEndBlock) []abci.ValidatorUpdate

EndBlock executes all ABCI EndBlock logic respective to the fee-share module. It returns no validator updates.

func (AppModule) ExportGenesis 

func (am AppModule) ExportGenesis(ctx sdk.Context, cdc sdkcodec.JSONCodec) json.RawMessage

ExportGenesis returns the fees module's exported genesis state as raw JSON bytes.

func (AppModule) GenerateGenesisState 

func (AppModule) GenerateGenesisState(simState *module.SimulationState)

GenerateGenesisState implements module.AppModuleSimulation.

func (AppModule) InitGenesis 

func (am AppModule) InitGenesis(ctx sdk.Context, cdc sdkcodec.JSONCodec, data json.RawMessage) []abci.ValidatorUpdate

InitGenesis performs the fees module's genesis initialization. It returns no validator updates.

func (AppModule) Name 

func (AppModule) Name() string

Name returns the fees module's name.

func (AppModule) QuerierRoute 

func (am AppModule) QuerierRoute() string

QuerierRoute returns the module's query routing key.

func (AppModule) RegisterInvariants 

func (am AppModule) RegisterInvariants(_ sdk.InvariantRegistry)

RegisterInvariants registers the fees module's invariants.

func (AppModule) RegisterServices 

func (am AppModule) RegisterServices(cfg module.Configurator)

RegisterServices registers a GRPC query service to respond to the module-specific GRPC queries.

func (AppModule) RegisterStoreDecoder 

func (AppModule) RegisterStoreDecoder(sdk.StoreDecoderRegistry)

RegisterStoreDecoder implements module.AppModuleSimulation.

func (AppModule) WeightedOperations 

func (AppModule) WeightedOperations(simState module.SimulationState) []simtypes.WeightedOperation

WeightedOperations implements module.AppModuleSimulation.

type AppModuleBasic 

type AppModuleBasic struct{}

AppModuleBasic type for the fees module

func (AppModuleBasic) ConsensusVersion 

func (AppModuleBasic) ConsensusVersion() uint64

ConsensusVersion returns the consensus state-breaking version for the module.

func (AppModuleBasic) DefaultGenesis 

func (AppModuleBasic) DefaultGenesis(cdc sdkcodec.JSONCodec) json.RawMessage

DefaultGenesis returns default genesis state as raw bytes for the fees module.

func (AppModuleBasic) GetQueryCmd 

func (AppModuleBasic) GetQueryCmd() *cobra.Command

GetQueryCmd returns the fees module's root query command.

func (AppModuleBasic) GetTxCmd 

func (AppModuleBasic) GetTxCmd() *cobra.Command

GetTxCmd returns the root tx command for the fees module.

func (AppModuleBasic) Name 

func (AppModuleBasic) Name() string

Name returns the fees module's name.

func (AppModuleBasic) RegisterGRPCGatewayRoutes 

func (b AppModuleBasic) RegisterGRPCGatewayRoutes(
	c sdkclient.Context, serveMux *runtime.ServeMux,
)

RegisterGRPCGatewayRoutes registers the gRPC Gateway routes for the fees module.

func (AppModuleBasic) RegisterInterfaces 

func (AppModuleBasic) RegisterInterfaces(
	interfaceRegistry sdkcodectypes.InterfaceRegistry,
)

RegisterInterfaces registers interfaces and implementations of the fees module.

func (AppModuleBasic) RegisterLegacyAminoCodec 

func (AppModuleBasic) RegisterLegacyAminoCodec(cdc *sdkcodec.LegacyAmino)

RegisterLegacyAminoCodec performs a no-op as the fees do not support Amino encoding.

func (AppModuleBasic) ValidateGenesis 

func (b AppModuleBasic) ValidateGenesis(
	cdc sdkcodec.JSONCodec, _ sdkclient.TxEncodingConfig, bz json.RawMessage,
) error

ValidateGenesis performs genesis state validation for the fees module.

Source Files

View all Source files

Directories

Path Synopsis
client
cli
Package types is a reverse proxy.
 Package types is a reverse proxy.

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.