commands

Documentation

Index

• Variables
• func AddNodeFlags(cmd *cobra.Command)
• func NewRunNodeCmd(nodeProvider nm.Provider) *cobra.Command
• func ParseConfig(cmd *cobra.Command) (*cfg.Config, error)
• func RollbackState(config *cfg.Config) (int64, []byte, error)

Variables

var (
	ErrHeightNotAvailable = errors.New("height is not available")
	ErrInvalidRequest     = errors.New("invalid request")
)

var CompactGoLevelDBCmd = &cobra.Command{
	Use:   "experimental-compact-goleveldb",
	Short: "force compacts the MintAI storage engine (only GoLevelDB supported)",
	Long: `
This is a temporary utility command that performs a force compaction on the state
and blockstores to reduce disk space for a pruning node. This should only be run
once the node has stopped. This command will likely be omitted in the future after
the planned refactor to the storage engine.

Currently, only GoLevelDB is supported.
	`,
	RunE: func(cmd *cobra.Command, args []string) error {
		if config.DBBackend != "goleveldb" {
			return errors.New("compaction is currently only supported with goleveldb")
		}

		compactGoLevelDBs(config.RootDir, logger)
		return nil
	},
}

var GenNodeKeyCmd = &cobra.Command{
	Use:     "gen-node-key",
	Aliases: []string{"gen_node_key"},
	Short:   "Generate a node key for this node and print its ID",
	PreRun:  deprecateSnakeCase,
	RunE:    genNodeKey,
}

GenNodeKeyCmd allows the generation of a node key. It prints node's ID to the standard output.

var GenValidatorCmd = &cobra.Command{
	Use:     "gen-validator",
	Aliases: []string{"gen_validator"},
	Short:   "Generate new validator keypair",
	PreRun:  deprecateSnakeCase,
	Run:     genValidator,
}

GenValidatorCmd allows the generation of a keypair for a validator.

var InitFilesCmd = &cobra.Command{
	Use:   "init",
	Short: "Initialize MintAI",
	RunE:  initFiles,
}

InitFilesCmd initialises a fresh MintAI Core instance.

var LightCmd = &cobra.Command{
	Use:   "light [chainID]",
	Short: "Run a light client proxy server, verifying MintAI rpc",
	Long: `Run a light client proxy server, verifying MintAI rpc.

All calls that can be tracked back to a block header by a proof
will be verified before passing them back to the caller. Other than
that, it will present the same interface as a full MintAI node.

Furthermore to the chainID, a fresh instance of a light client will
need a primary RPC address, a trusted hash and height and witness RPC addresses
(if not using sequential verification). To restart the node, thereafter
only the chainID is required.

When /abci_query is called, the Merkle key path format is:

	/{store name}/{key}

Please verify with your application that this Merkle key format is used (true
for applications built w/ Cosmos SDK).
`,
	RunE: runProxy,
	Args: cobra.ExactArgs(1),
	Example: `light cosmoshub-3 -p http://52.57.29.196:26657 -w http://public-seed-node.cosmoshub.certus.one:26657
	--height 962118 --hash 28B97BE9F6DE51AC69F70E0B7BFD7E5C9CD1A595B7DC31AFF27C50D4948020CD`,
}

LightCmd represents the base command when called without any subcommands

var ProbeUpnpCmd = &cobra.Command{
	Use:     "probe-upnp",
	Aliases: []string{"probe_upnp"},
	Short:   "Test UPnP functionality",
	RunE:    probeUpnp,
	PreRun:  deprecateSnakeCase,
}

ProbeUpnpCmd adds capabilities to test the UPnP functionality.

var ReIndexEventCmd = &cobra.Command{
	Use:   "reindex-event",
	Short: "Re-index events to the event store backends",
	Long: `
reindex-event is an offline tooling to re-index block and tx events to the eventsinks.
You can run this command when the event store backend dropped/disconnected or you want to
replace the backend. The default start-height is 0, meaning the tooling will start
reindex from the base block height(inclusive); and the default end-height is 0, meaning
the tooling will reindex until the latest block height(inclusive). User can omit
either or both arguments.

Note: This operation requires ABCIResponses. Do not set DiscardABCIResponses to true if you
want to use this command.
	`,
	Example: `
	mintai reindex-event
	mintai reindex-event --start-height 2
	mintai reindex-event --end-height 10
	mintai reindex-event --start-height 2 --end-height 10
	`,
	Run: func(cmd *cobra.Command, args []string) {
		bs, ss, err := loadStateAndBlockStore(config)
		if err != nil {
			fmt.Println(reindexFailed, err)
			return
		}

		if err := checkValidHeight(bs); err != nil {
			fmt.Println(reindexFailed, err)
			return
		}

		bi, ti, err := loadEventSinks(config)
		if err != nil {
			fmt.Println(reindexFailed, err)
			return
		}

		riArgs := eventReIndexArgs{
			startHeight:  startHeight,
			endHeight:    endHeight,
			blockIndexer: bi,
			txIndexer:    ti,
			blockStore:   bs,
			stateStore:   ss,
		}
		if err := eventReIndex(cmd, riArgs); err != nil {
			panic(fmt.Errorf("%s: %w", reindexFailed, err))
		}

		fmt.Println("event re-index finished")
	},
}

ReIndexEventCmd constructs a command to re-index events in a block height interval.

var ReplayCmd = &cobra.Command{
	Use:   "replay",
	Short: "Replay messages from WAL",
	Run: func(cmd *cobra.Command, args []string) {
		consensus.RunReplayFile(config.BaseConfig, config.Consensus, false)
	},
}

ReplayCmd allows replaying of messages from the WAL.

var ReplayConsoleCmd = &cobra.Command{
	Use:     "replay-console",
	Aliases: []string{"replay_console"},
	Short:   "Replay messages from WAL in a console",
	Run: func(cmd *cobra.Command, args []string) {
		consensus.RunReplayFile(config.BaseConfig, config.Consensus, true)
	},
	PreRun: deprecateSnakeCase,
}

ReplayConsoleCmd allows replaying of messages from the WAL in a console.

var ResetAllCmd = &cobra.Command{
	Use:     "unsafe-reset-all",
	Aliases: []string{"unsafe_reset_all"},
	Short:   "(unsafe) Remove all the data and WAL, reset this node's validator to genesis state",
	RunE:    resetAllCmd,
	PreRun:  deprecateSnakeCase,
}

ResetAllCmd removes the database of this MintAI core instance.

var ResetPrivValidatorCmd = &cobra.Command{
	Use:     "unsafe-reset-priv-validator",
	Aliases: []string{"unsafe_reset_priv_validator"},
	Short:   "(unsafe) Reset this node's validator to genesis state",
	PreRun:  deprecateSnakeCase,
	RunE:    resetPrivValidator,
}

ResetPrivValidatorCmd resets the private validator files.

var ResetStateCmd = &cobra.Command{
	Use:    "reset-state",
	Short:  "Remove all the data and WAL",
	PreRun: deprecateSnakeCase,
	RunE: func(cmd *cobra.Command, args []string) (err error) {
		config, err = ParseConfig(cmd)
		if err != nil {
			return err
		}

		return resetState(config.DBDir(), logger)
	},
}

ResetStateCmd removes the database of the specified MintAI core instance.

var RollbackStateCmd = &cobra.Command{
	Use:   "rollback",
	Short: "rollback MintAI state by one height",
	Long: `
A state rollback is performed to recover from an incorrect application state transition,
when MintAI has persisted an incorrect app hash and is thus unable to make
progress. Rollback overwrites a state at height n with the state at height n - 1.
The application should also roll back to height n - 1. No blocks are removed, so upon
restarting MintAI the transactions in block n will be re-executed against the
application.
`,
	RunE: func(cmd *cobra.Command, args []string) error {
		height, hash, err := RollbackState(config)
		if err != nil {
			return fmt.Errorf("failed to rollback state: %w", err)
		}

		fmt.Printf("Rolled back state to height %d and hash %v", height, hash)
		return nil
	},
}

var RootCmd = &cobra.Command{
	Use:   "mintai",
	Short: "BFT state machine replication for applications in any programming languages",
	PersistentPreRunE: func(cmd *cobra.Command, args []string) (err error) {
		if cmd.Name() == VersionCmd.Name() {
			return nil
		}

		config, err = ParseConfig(cmd)
		if err != nil {
			return err
		}

		if config.LogFormat == cfg.LogFormatJSON {
			logger = log.NewTMJSONLogger(log.NewSyncWriter(os.Stdout))
		}

		logger, err = tmflags.ParseLogLevel(config.LogLevel, logger, cfg.DefaultLogLevel)
		if err != nil {
			return err
		}

		if viper.GetBool(cli.TraceFlag) {
			logger = log.NewTracingLogger(logger)
		}

		logger = logger.With("module", "main")
		return nil
	},
}

RootCmd is the root command for MintAI core.

var ServiceStart = &cobra.Command{
	Use:     "service-start",
	Aliases: []string{"service_start"},
	Short:   "Generate task commitment to the network",
	PreRun:  deprecateSnakeCase,
	RunE:    serviceStartWithConfig,
}

var ShowNodeIDCmd = &cobra.Command{
	Use:     "show-node-id",
	Aliases: []string{"show_node_id"},
	Short:   "Show this node's ID",
	RunE:    showNodeID,
	PreRun:  deprecateSnakeCase,
}

ShowNodeIDCmd dumps node's ID to the standard output.

var ShowValidatorCmd = &cobra.Command{
	Use:     "show-validator",
	Aliases: []string{"show_validator"},
	Short:   "Show this node's validator info",
	RunE:    showValidator,
	PreRun:  deprecateSnakeCase,
}

ShowValidatorCmd adds capabilities for showing the validator info.

var TestnetFilesCmd = &cobra.Command{
	Use:   "testnet",
	Short: "Initialize files for a MintAI testnet",
	Long: `testnet will create "v" + "n" number of directories and populate each with
necessary files (private validator, genesis, config, etc.).

Note, strict routability for addresses is turned off in the config file.

Optionally, it will fill in persistent_peers list in config file using either hostnames or IPs.

Example:

	mintai testnet --v 4 --o ./output --populate-persistent-peers --starting-ip-address 192.168.10.2
	`,
	RunE: testnetFiles,
}

TestnetFilesCmd allows initialisation of files for a MintAI testnet.

var VersionCmd = &cobra.Command{
	Use:   "version",
	Short: "Show version info",
	Run: func(cmd *cobra.Command, args []string) {
		if verbose {
			values, _ := json.MarshalIndent(struct {
				Tendermint    string `json:"tendermint"`
				ABCI          string `json:"abci"`
				BlockProtocol uint64 `json:"block_protocol"`
				P2PProtocol   uint64 `json:"p2p_protocol"`
			}{
				Tendermint:    version.TMCoreSemVer,
				ABCI:          version.ABCIVersion,
				BlockProtocol: version.BlockProtocol,
				P2PProtocol:   version.P2PProtocol,
			}, "", "  ")
			fmt.Println(string(values))
		} else {
			fmt.Println(version.TMCoreSemVer)
		}
	},
}

VersionCmd ...

Functions

func AddNodeFlags

func AddNodeFlags(cmd *cobra.Command)

AddNodeFlags exposes some common configuration options on the command-line These are exposed for convenience of commands embedding a mintai node

func NewRunNodeCmd

func NewRunNodeCmd(nodeProvider nm.Provider) *cobra.Command

NewRunNodeCmd returns the command that allows the CLI to start a node. It can be used with a custom PrivValidator and in-process ABCI application.

func ParseConfig

func ParseConfig(cmd *cobra.Command) (*cfg.Config, error)

ParseConfig retrieves the default environment configuration, sets up the MintAI root and ensures that the root exists

func RollbackState

func RollbackState(config *cfg.Config) (int64, []byte, error)

RollbackState takes the state at the current height n and overwrites it with the state at height n - 1. Note state here refers to mintai state not application state. Returns the latest state height and app hash alongside an error if there was one.