btc

package
v0.6.0-rc2 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Mar 30, 2023 License: BlueOak-1.0.0 Imports: 21 Imported by: 1

Documentation

Index

Constants

View Source 
const (
	// MaxCLTVScriptNum is the largest usable value for a CLTV lockTime. This
	// will actually be stored in a 5-byte ScriptNum since they have a sign bit,
	// however, it is not 2^39-1 since the spending transaction's nLocktime is
	// an unsigned 32-bit integer and it must be at least the CLTV value. This
	// establishes a maximum lock time of February 7, 2106. Any later requires
	// using a block height instead of a unix epoch time stamp.
	MaxCLTVScriptNum = 1<<32 - 1 // 0xffff_ffff a.k.a. 2^32-1

	// SecretHashSize is the byte-length of the hash of the secret key used in an
	// atomic swap.
	SecretHashSize = 32

	// SecretKeySize is the byte-length of the secret key used in an atomic swap.
	SecretKeySize = 32

	// ContractHashSize is the size of the script-hash for an atomic swap
	// contract.
	ContractHashSize = 20

	// PubKeyLength is the length of a serialized compressed public key.
	PubKeyLength = 33

	// 4 bytes version + 4 bytes locktime + 2 bytes of varints for the number of
	// transaction inputs and outputs
	MinimumBlockOverHead = 10

	// SwapContractSize is the worst case scenario size for a swap contract,
	// which is the pk-script of the non-change output of an initialization
	// transaction as used in execution of an atomic swap.
	// See ExtractSwapDetails for a breakdown of the bytes.
	SwapContractSize = 97

	// DERSigLength is the maximum length of a DER encoded signature with a
	// sighash type byte.
	DERSigLength = 73

	// RedeemSwapSigScriptSize is the worst case (largest) serialize size
	// of a transaction signature script that redeems atomic swap output contract.
	// It is calculated as:
	//
	//   - OP_DATA_73
	//   - 72 bytes DER signature + 1 byte sighash
	//   - OP_DATA_33
	//   - 33 bytes serialized compressed pubkey
	//   - OP_DATA_32
	//   - 32 bytes secret key
	//   - OP_1
	//   - varint 97
	//   - 97 bytes redeem script
	RedeemSwapSigScriptSize = 1 + DERSigLength + 1 + 33 + 1 + 32 + 1 + 2 + 97

	// RefundSigScriptSize is the worst case (largest) serialize size
	// of a transaction input script that refunds a compressed P2PKH output.
	// It is calculated as:
	//
	//   - OP_DATA_73
	//   - 72 bytes DER signature + 1 byte sighash
	//   - OP_DATA_33
	//   - 33 bytes serialized compressed pubkey
	//   - OP_0
	//   - varint 97 => OP_PUSHDATA1(0x4c) + 0x61
	//   - 97 bytes contract
	RefundSigScriptSize = 1 + DERSigLength + 1 + 33 + 1 + 2 + 97

	// Overhead for a wire.TxIn. See wire.TxIn.SerializeSize.
	// hash 32 bytes + index 4 bytes + sequence 4 bytes.
	TxInOverhead = 32 + 4 + 4 // 40

	// TxOutOverhead is the overhead associated with a transaction output.
	// 8 bytes value + at least 1 byte varint script size
	TxOutOverhead = 8 + 1

	RedeemP2PKSigScriptSize = 1 + DERSigLength

	// RedeemP2PKHSigScriptSize is the worst case (largest) serialize size
	// of a transaction input script that redeems a compressed P2PKH output.
	// It is calculated as:
	//
	//   - OP_DATA_73
	//   - 72 bytes DER signature + 1 byte sighash
	//   - OP_DATA_33
	//   - 33 bytes serialized compressed pubkey
	RedeemP2PKHSigScriptSize = 1 + DERSigLength + 1 + 33 // 108

	// P2PKHPkScriptSize is the size of a transaction output script that
	// pays to a compressed pubkey hash.  It is calculated as:
	//
	//   - OP_DUP
	//   - OP_HASH160
	//   - OP_DATA_20
	//   - 20 bytes pubkey hash
	//   - OP_EQUALVERIFY
	//   - OP_CHECKSIG
	P2PKHPkScriptSize = 1 + 1 + 1 + 20 + 1 + 1 // 25

	// P2PKHOutputSize is the size of the serialized P2PKH output.
	P2PKHOutputSize = TxOutOverhead + P2PKHPkScriptSize // 9 + 25 = 34

	// P2SHPkScriptSize is the size of a transaction output script that
	// pays to a redeem script.  It is calculated as:
	//
	//   - OP_HASH160
	//   - OP_DATA_20
	//   - 20 bytes redeem script hash
	//   - OP_EQUAL
	P2SHPkScriptSize = 1 + 1 + 20 + 1

	// P2SHOutputSize is the size of the serialized P2SH output.
	P2SHOutputSize = TxOutOverhead + P2SHPkScriptSize // 9 + 23 = 32

	// P2WSHPkScriptSize is the size of a segwit transaction output script that
	// pays to a redeem script.  It is calculated as:
	//
	//   - OP_0
	//   - OP_DATA_32
	//   - 32 bytes redeem script hash
	P2WSHPkScriptSize = 1 + 1 + 32

	// P2WSHOutputSize is the size of the serialized P2WSH output.
	P2WSHOutputSize = TxOutOverhead + P2WSHPkScriptSize // 9 + 34 = 43

	// RedeemP2PKHInputSize is the worst case (largest) serialize size of a
	// transaction input redeeming a compressed P2PKH output.  It is
	// calculated as:
	//
	//   - 32 bytes previous tx
	//   - 4 bytes output index
	//   - 4 bytes sequence
	//   - 1 byte compact int encoding value 108
	//   - 108 bytes signature script
	RedeemP2PKHInputSize = TxInOverhead + 1 + RedeemP2PKHSigScriptSize // 40 + 1 + 108 = 149

	// RedeemP2WPKHInputSize is the worst case size of a transaction
	// input redeeming a P2WPKH output. This does not account for witness data,
	// which is considered at a lower weight for fee calculations. It is
	// calculated as
	//
	//   - 32 bytes previous tx
	//   - 4 bytes output index
	//   - 4 bytes sequence
	//   - 1 byte encoding empty redeem script
	//   - 0 bytes signature script
	RedeemP2WPKHInputSize = TxInOverhead + 1

	// RedeemP2WPKHInputWitnessWeight is the worst case weight of
	// a witness for spending P2WPKH and nested P2WPKH outputs. It
	// is calculated as:
	//
	//   - 1 wu compact int encoding value 2 (number of items)
	//   - 1 wu compact int encoding value 73
	//   - 72 wu DER signature + 1 wu sighash
	//   - 1 wu compact int encoding value 33
	//   - 33 wu serialized compressed pubkey
	// NOTE: witness data is not script.
	RedeemP2WPKHInputWitnessWeight = 1 + 1 + DERSigLength + 1 + 33 // 109

	// RedeemP2WPKHInputTotalSize is the worst case size of a transaction
	// input redeeming a P2WPKH output and the corresponding witness data.
	// It is calculated as:
	//
	// 41 vbytes base tx input
	// 109wu witness = 28 vbytes
	// total = 69 vbytes
	RedeemP2WPKHInputTotalSize = RedeemP2WPKHInputSize +
		(RedeemP2WPKHInputWitnessWeight+(witnessWeight-1))/witnessWeight

	// SigwitMarkerAndFlagWeight is the 2 bytes of overhead witness data
	// added to every segwit transaction.
	SegwitMarkerAndFlagWeight = 2

	// P2WPKHPkScriptSize is the size of a transaction output script that
	// pays to a witness pubkey hash. It is calculated as:
	//
	//   - OP_0
	//   - OP_DATA_20
	//   - 20 bytes pubkey hash
	P2WPKHPkScriptSize = 1 + 1 + 20

	// P2WPKHOutputSize is the serialize size of a transaction output with a
	// P2WPKH output script. It is calculated as:
	//
	//   - 8 bytes output value
	//   - 1 byte compact int encoding value 22
	//   - 22 bytes P2PKH output script
	P2WPKHOutputSize = TxOutOverhead + P2WPKHPkScriptSize // 31

	// MinimumTxOverhead is the size of an empty transaction.
	// 4 bytes version + 4 bytes locktime + 2 bytes of varints for the number of
	// transaction inputs and outputs
	MinimumTxOverhead = 4 + 4 + 1 + 1 // 10

	// InitTxSizeBase is the size of a standard serialized atomic swap
	// initialization transaction with one change output and no inputs. This is
	// MsgTx overhead + 1 P2PKH change output + 1 P2SH contract output. However,
	// the change output might be P2WPKH, in which case it would be smaller.
	InitTxSizeBase = MinimumTxOverhead + P2PKHOutputSize + P2SHOutputSize // 10 + 34 + 32 = 76

	// InitTxSize is InitTxBaseSize + 1 P2PKH input
	InitTxSize = InitTxSizeBase + RedeemP2PKHInputSize // 76 + 149 = 225

	// InitTxSizeBaseSegwit is the size of a standard serialized atomic swap
	// initialization transaction with one change output and no inputs. The
	// change output is assumed to be segwit. 10 + 31 + 43 = 84
	InitTxSizeBaseSegwit = MinimumTxOverhead + P2WPKHOutputSize + P2WSHOutputSize

	// InitTxSizeSegwit is InitTxSizeSegwit + 1 P2WPKH input.
	// 84 vbytes base tx
	// 41 vbytes base tx input
	// 109wu witness +  2wu segwit marker and flag = 28 vbytes
	// total = 153 vbytes
	InitTxSizeSegwit = InitTxSizeBaseSegwit + RedeemP2WPKHInputSize +
		(SegwitMarkerAndFlagWeight+RedeemP2WPKHInputWitnessWeight+(witnessWeight-1))/witnessWeight

	// BondScriptSize is the maximum size of a DEX time-locked fidelity bond
	// output script to which a bond P2SH pays:
	//   OP_DATA_4/5 (4/5 bytes lockTime) OP_CHECKLOCKTIMEVERIFY OP_DROP OP_DUP OP_HASH160 OP_DATA_20 (20-byte pubkey hash160) OP_EQUALVERIFY OP_CHECKSIG
	BondScriptSize = 1 + 5 + 1 + 1 + 1 + 1 + 1 + 20 + 1 + 1 // 33

	// RedeemBondSigScriptSize is the worst case size of a fidelity bond
	// signature script that spends a bond output. It includes a signature, a
	// compressed pubkey, and the bond script. Each of said data pushes use an
	// OP_DATA_ code.
	RedeemBondSigScriptSize = 1 + DERSigLength + 1 + 33 + 1 + BondScriptSize // 142

	// BondPushDataSize is the size of the nulldata in a bond commitment output:
	//  OP_RETURN <pushData: ver[2] | account_id[32] | lockTime[4] | pkh[20]>
	BondPushDataSize = 2 + account.HashSize + 4 + 20
)
View Source 
const (
	ScriptP2PKH = 1 << iota
	ScriptP2PK
	ScriptP2SH
	ScriptTypeSegwit
	ScriptMultiSig
	ScriptUnsupported
)

Variables

View Source 
var (
	// ErrMalformedDescriptor is returned when a provided descriptor string does
	// not match the expected format for a descriptor.
	ErrMalformedDescriptor = errors.New("malformed descriptor")
)
View Source 
var RPCPorts = NetPorts{
	Mainnet: "8332",
	Testnet: "18332",
	Simnet:  "18443",
}

RPCPorts are the default BTC ports.

View Source 
var UnitInfo = dex.UnitInfo{
	AtomicUnit: "Sats",
	Conventional: dex.Denomination{
		Unit:             "BTC",
		ConversionFactor: 1e8,
	},
	Alternatives: []dex.Denomination{
		{
			Unit:             "mBTC",
			ConversionFactor: 1e5,
		},
		{
			Unit:             "µBTC",
			ConversionFactor: 1e2,
		},
	},
}

Functions

func CheckRPCConfig added in v0.4.0 

func CheckRPCConfig(cfg *RPCConfig, name string, network dex.Network, ports NetPorts) error

func DeepChild added in v0.5.0 

func DeepChild(root *hdkeychain.ExtendedKey, path []uint32) (*hdkeychain.ExtendedKey, error)

DeepChild derives a new extended key from the provided root extended key and derivation path. This is useful given a Descriptor.Key of type KeyExtended that may be decoded into and extended key and path with ParseKeyExtended. Given an address referencing the extended key via its fingerprint (also returned by ParseKeyExtended) and derivation path, the private key for that address may be derived given the child index of the address.

func ExtractBondCommitDataV0 added in v0.6.0 

func ExtractBondCommitDataV0(scriptVer uint16, pkScript []byte) (acct account.AccountID, lockTime uint32, pubkeyHash [20]byte, err error)

ExtractBondCommitDataV0 parses a v0 bond commitment output script. This is the OP_RETURN output, not the P2SH bond output. Use ExtractBondDetailsV0 to parse the P2SH bond output's redeem script.

If the decoded commitment data indicates a version other than 0, an error is returned.

func ExtractBondDetailsV0 added in v0.6.0 

func ExtractBondDetailsV0(scriptVersion uint16, bondScript []byte) (lockTime uint32, pkh []byte, err error)

ExtractBondDetailsV0 validates the provided bond redeem script, extracting the lock time and pubkey. The V0 format of the script must be as follows: 

<lockTime> OP_CHECKLOCKTIMEVERIFY OP_DROP OP_DUP OP_HASH160 <pubkeyhash[20]> OP_EQUALVERIFY OP_CHECKSIG

The script version refers to the pkScript version, not bond version, which pertains to DEX's version of the bond script.

func ExtractContractHash 

func ExtractContractHash(scriptHex string) ([]byte, error)

ExtractContractHash extracts the contract P2SH or P2WSH address from a pkScript. A non-nil error is returned if the hexadecimal encoding of the pkScript is invalid, or if the pkScript is not a P2SH or P2WSH script.

func ExtractPubKeyHash 

func ExtractPubKeyHash(script []byte) []byte

ExtractPubKeyHash extracts the pubkey hash from the passed script if it is a standard pay-to-pubkey-hash script. It will return nil otherwise.

func ExtractScriptHash 

func ExtractScriptHash(script []byte) []byte

ExtractScriptHash attempts to extract the redeem script hash from a pkScript. If it is not a P2SH or P2WSH pkScript, a nil slice is returned.

func ExtractSwapDetails 

func ExtractSwapDetails(pkScript []byte, segwit bool, chainParams *chaincfg.Params) (
	sender, receiver btcutil.Address, lockTime uint64, secretHash []byte, err error)

ExtractSwapDetails extacts the sender and receiver addresses from a swap contract. If the provided script is not a swap contract, an error will be returned.

func FindKeyPush 

func FindKeyPush(witness [][]byte, sigScript, contractHash []byte, segwit bool, chainParams *chaincfg.Params) ([]byte, error)

FindKeyPush attempts to extract the secret key from the signature script. The contract must be provided for the search algorithm to verify the correct data push. Only contracts of length SwapContractSize that can be validated by ExtractSwapDetails are recognized.

func IsDust 

func IsDust(txOut *wire.TxOut, minRelayTxFee uint64) bool

IsDust returns whether or not the passed transaction output amount is considered dust or not based on the passed minimum transaction relay fee. Dust is defined in terms of the minimum transaction relay fee. Based on btcd/policy isDust. See btcd/policy for further documentation.

func IsDustVal added in v0.6.0 

func IsDustVal(txSize, value, minRelayTxFee uint64, segwit bool) bool

IsDustVal is like IsDust but only takes the txSize, amount and if segwit.

func MakeBondScript added in v0.6.0 

func MakeBondScript(ver uint16, lockTime uint32, pubkeyHash []byte) ([]byte, error)

MakeBondScript constructs a versioned bond output script for the provided lock time and pubkey hash. Only version 0 is supported at present. The lock time must be less than 2^32-1 so that it uses at most 5 bytes. The lockTime is also required to use at least 4 bytes (time stamp, not block time).

func MakeContract 

func MakeContract(rAddr, sAddr btcutil.Address, secretHash []byte, lockTime int64, segwit bool, chainParams *chaincfg.Params) ([]byte, error)

MakeContract creates a segwit atomic swap contract. The secretHash MUST be computed from a secret of length SecretKeySize bytes or the resulting contract will be invalid.

func MsgTxVBytes 

func MsgTxVBytes(msgTx *wire.MsgTx) uint64

MsgTxVBytes returns the transaction's virtual size, which accounts for the segwit input weighting.

func ParseKeyExtended added in v0.5.0 

func ParseKeyExtended(keyPart string) (key *hdkeychain.ExtendedKey, fingerprint, path string, isRange bool, err error)

ParseKeyExtended is used to decode a Descriptor.Key when KeyFmt is KeyExtended, which is the standard BIP32 extended key encoding with optional derivation steps and a range indicator appended. The fingerprint of the extended key is returned as a convenience. Use ParsePath to get the derivation steps. e.g. "tpubDCo.../0/*" is an extended public key with a ranged path.

func ParsePath added in v0.5.0 

func ParsePath(p string) (path []uint32, isRange bool, err error)

ParsePath splits a common path string such as 84'/0'/0'/0 into it's components, returning the steps in the derivation as integers. Hardened key derivation steps, which are indicated by a ' or h, are offset by 2^31. Certain paths in descriptors may end with /* (or /*' or /*h) to indicate all child keys (or hardened child keys), in which case isRange will be true. As a special case, a prefix of "m/" or just "/" is allowed, but a master key fingerprint is not permitted and must be stripped first.

func ReadCloneParams 

func ReadCloneParams(cloneParams *CloneParams) *chaincfg.Params

ReadCloneParams translates a CloneParams into a btcsuite chaincfg.Params.

func RedeemP2SHContract 

func RedeemP2SHContract(contract, sig, pubkey, secret []byte) ([]byte, error)

RedeemP2SHContract returns the signature script to redeem a contract output using the redeemer's signature and the initiator's secret. This function assumes P2SH and appends the contract as the final data push.

func RedeemP2WSHContract 

func RedeemP2WSHContract(contract, sig, pubkey, secret []byte) [][]byte

RedeemP2WSHContract returns the witness script to redeem a contract output using the redeemer's signature and the initiator's secret. This function assumes P2WSH and appends the contract as the final data push.

func RefundBondScript added in v0.6.0 

func RefundBondScript(bondScript, sig, pubkey []byte) ([]byte, error)

RefundBondScript builds the signature script to refund a time-locked fidelity bond in a P2SH output paying to the provided P2PKH bondScript.

func RefundBondScriptSegwit added in v0.6.0 

func RefundBondScriptSegwit(bondScript, sig, pubkey []byte) [][]byte

RefundBondScript builds the signature script to refund a time-locked fidelity bond in a P2WSH output paying to the provided P2PKH bondScript.

func RefundP2SHContract 

func RefundP2SHContract(contract, sig, pubkey []byte) ([]byte, error)

RefundP2SHContract returns the signature script to refund a contract output using the contract author's signature after the locktime has been reached. This function assumes P2SH and appends the contract as the final data push.

func RefundP2WSHContract 

func RefundP2WSHContract(contract, sig, pubkey []byte) [][]byte

RefundP2WSHContract returns the witness to refund a contract output using the contract author's signature after the locktime has been reached. This function assumes P2WSH and appends the contract as the final data push.

func StandardizeRPCConf added in v0.6.0 

func StandardizeRPCConf(cfg *RPCConfig, defaultPort string)

StandardizeRPCConf standardizes the RPCBind and RPCPort fields, and returns the updated RPCBind field. defaultPort must be either an empty string or a valid representation of a positive 16-bit integer.

func SystemConfigPath 

func SystemConfigPath(asset string) string

SystemConfigPath will return the default config file path for bitcoin-like assets.

Types

type AddressDecoder added in v0.2.0 

type AddressDecoder func(addr string, net *chaincfg.Params) (btcutil.Address, error)

AddressDecoder decodes a string address to a btcutil.Address.

type AddressStringer added in v0.5.0 

type AddressStringer func(btcutil.Address, *chaincfg.Params) (string, error)

AddressStringer converts the btcutil.Address into a string address. This may be different from using (btcutil.Address).String when there is a special encoding such as a BCH "Cash Address".

type BTCScriptType 

type BTCScriptType uint8

BTCScriptType holds details about a pubkey script and possibly it's redeem script.

func ExtractScriptData added in v0.4.0 

func ExtractScriptData(script []byte, chainParams *chaincfg.Params) (BTCScriptType, []string, int, error)

ExtractScriptData extracts script type, addresses, and required signature count from a pkScript. Non-standard scripts are not necessarily an error; non-nil errors are only returned if the script cannot be parsed. See also InputInfo for additional signature script size data

func ParseScriptType 

func ParseScriptType(pkScript, redeemScript []byte) BTCScriptType

ParseScriptType creates a BTCScriptType bitmap for the script type. A script type will be some combination of pay-to-pubkey-hash, pay-to-script-hash, and stake. If a script type is P2SH, it may or may not be mutli-sig.

func (BTCScriptType) IsMultiSig 

func (s BTCScriptType) IsMultiSig() bool

IsMultiSig is whether the pkscript references a multi-sig redeem script. Since the DEX will know the redeem script, we can say whether it's multi-sig.

func (BTCScriptType) IsP2PK added in v0.4.3 

func (s BTCScriptType) IsP2PK() bool

IsP2PK will return boolean true if the script is a P2PK script.

func (BTCScriptType) IsP2PKH 

func (s BTCScriptType) IsP2PKH() bool

IsP2PKH will return boolean true if the script is a P2PKH script.

func (BTCScriptType) IsP2SH 

func (s BTCScriptType) IsP2SH() bool

IsP2SH will return boolean true if the script is a P2SH script.

func (BTCScriptType) IsP2WPKH 

func (s BTCScriptType) IsP2WPKH() bool

IsP2WPKH will return boolean true if the script is a P2WPKH script.

func (BTCScriptType) IsP2WSH 

func (s BTCScriptType) IsP2WSH() bool

IsP2WSH will return boolean true if the script is a P2WSH script.

func (BTCScriptType) IsSegwit 

func (s BTCScriptType) IsSegwit() bool

IsSegwit will return boolean true if the script is a P2WPKH or P2WSH script.

type BtcScriptAddrs 

type BtcScriptAddrs struct {
	PubKeys   []btcutil.Address
	NumPK     int
	PkHashes  []btcutil.Address
	NumPKH    int
	NRequired int // num sigs needed
}

BtcScriptAddrs is information about the pubkeys or pubkey hashes present in a scriptPubKey (and the redeem script, for p2sh). This information can be used to estimate the spend script size, e.g. pubkeys in a redeem script don't require pubkeys in the witness/scriptSig, but pubkey hashes do.

func ExtractScriptAddrs 

func ExtractScriptAddrs(script []byte, chainParams *chaincfg.Params) (*BtcScriptAddrs, bool, error)

ExtractScriptAddrs extracts the addresses from the pubkey script, or the redeem script if the pubkey script is P2SH. The returned bool indicates if the script is non-standard.

type CloneParams 

type CloneParams struct {
	// Name defines a human-readable identifier for the network. e.g. "mainnet",
	// "testnet4", or "regtest"
	Name string
	// PubKeyHashAddrID: Net ID byte for a pubkey-hash address
	PubKeyHashAddrID byte
	// ScriptHashAddrID: Net ID byte for a script-hash address
	ScriptHashAddrID byte
	// Bech32HRPSegwit: Human-readable part for Bech32 encoded segwit addresses,
	// as defined in BIP 173.
	Bech32HRPSegwit string
	// CoinbaseMaturity: The number of confirmations before a transaction
	// spending a coinbase input can be spent.
	CoinbaseMaturity uint16
	// Net is the network identifier, e.g. wire.BitcoinNet.
	Net         uint32
	GenesisHash *chainhash.Hash
	// HDPrivateKeyID and HDPublicKeyID are the BIP32 hierarchical deterministic
	// extended key magic sequences. They are ONLY required if there is a need
	// to derive addresses from an extended key, such as if the asset is being
	// used by the server with the hdkeychain package to create fee addresses.
	// These are not required by the client.
	HDPrivateKeyID [4]byte
	HDPublicKeyID  [4]byte
}

CloneParams are the parameters needed by BTC-clone-based Backend and ExchangeWallet implementations. Pass a *CloneParams to ReadCloneParams to create a *chaincfg.Params for server/asset/btc.NewBTCClone and client/asset/btc.BTCCloneWallet.

type Descriptor added in v0.5.0 

type Descriptor struct {
	// Function is the name of the top level function that begins the
	// descriptor. For example, "pk", "pkh", "wpkh", "sh", "wsh", etc.
	Function string
	// Key is set for the KEY type functions and certain SCRIPT functions with
	// nested KEY functions. May include a suffixed derivation path.
	Key string
	// KeyFmt is the type of key encoding.
	KeyFmt KeyFmt
	// KeyOrigin is an optional part of a KEY descriptor that describes the
	// derivation of the key.
	KeyOrigin *KeyOrigin
	// Nested will only be set for descriptors with SCRIPT expressions.
	Nested *Descriptor
	// Expression is the entirety of the arguments to Function. This may be a
	// KEY, SCRIPT, TREE, or combination of arguments depending on the function.
	Expression string
	// Checksum is an optional 8-character alphanumeric checksum of the
	// descriptor. It is not validated.
	Checksum string
}

Descriptor models the output description language used by Bitcoin Core descriptor wallets. Descriptors are a textual representation of an output or address that begins with a "function", which may take as an argument a KEY, SCRIPT, or other data specific to the function. This Descriptor type is provided to decode and represent the most common KEY descriptor types and SCRIPT types that commonly wrap other KEY types.

func ParseDescriptor added in v0.5.0 

func ParseDescriptor(desc string) (*Descriptor, error)

ParseDescriptor parses a descriptor string. See https://github.com/bitcoin/bitcoin/blob/master/doc/descriptors.md If the descriptor string does not match the expected pattern, an ErrMalformedDescriptor error is returned. See the Descriptor type documentation for information.

type KeyFmt added in v0.5.0 

type KeyFmt byte

KeyFmt specifies the encoding of the key within a KEY expression. 

const (
	KeyUnknown KeyFmt = iota
	KeyWIFPriv
	KeyHexPub
	KeyExtended
)

Valid KeyFmt values are one of:

  1. KeyHexPub: hex-encoded public key, compressed or uncompressed
  2. KeyWIFPriv: WIF-encoded private key
  3. KeyExtended public or private extended (BIP32) public key, PLUS zero or more /NUM or /NUM' steps, optionally terminated with a /* or /' to indicate all direct children (a range).

type KeyOrigin added in v0.5.0 

type KeyOrigin struct {
	// Fingerprint is "Exactly 8 hex characters for the fingerprint of the key
	// where the derivation starts".
	Fingerprint string
	// Path is "zero or more /NUM or /NUM' path elements to indicate unhardened
	// or hardened derivation steps between the fingerprint and the key or
	// xpub/xprv root that follows". ParseDescriptor will strip a leading "/".
	Path string
	// Steps is the parsed path. Hardened keys indexes are offset by 2^31.
	Steps []uint32
}

KeyOrigin describes the optional part of a KEY expression that contains key origin information in side functions like pkh(KEY). For example, in the descriptor wpkh([b940190e/84'/1'/0'/0/0]0300034...) the key origin is [b940190e/84'/1'/0'/0/0], where the first part must be 8 hexadecimal characters for the fingerprint of the master key, and there are zero or more derivation steps to reach the key. See https://github.com/bitcoin/bitcoin/blob/master/doc/descriptors.md#key-origin-identification Note for Fingerprint: "software must be willing to deal with collisions".

func (*KeyOrigin) String added in v0.5.0 

func (ko *KeyOrigin) String() string

String creates the canonical string representation of the key origin, e.g. [d34db33f/44'/0'/0] for a Key origin with a Fingerprint of d34db33f and a Path of 44'/0'/0.

type NetPorts 

type NetPorts struct {
	Mainnet string
	Testnet string
	Simnet  string
}

NetPorts are a set of port to use with the different networks.

type RPCConfig added in v0.4.0 

type RPCConfig struct {
	RPCUser    string `ini:"rpcuser"`
	RPCPass    string `ini:"rpcpassword"`
	RPCBind    string `ini:"rpcbind"`
	RPCPort    int    `ini:"rpcport"`
	RPCConnect string `ini:"rpcconnect"` // (bitcoin-cli) if set, reflected in RPCBind
}

RPCConfig holds the parameters needed to initialize an RPC connection to a btc wallet or backend. Default values are used for RPCBind and/or RPCPort if not set.

type SpendInfo 

type SpendInfo struct {
	SigScriptSize     uint32
	WitnessSize       uint32
	ScriptAddrs       *BtcScriptAddrs
	ScriptType        BTCScriptType
	NonStandardScript bool
}

SpendInfo is information about an input and it's previous outpoint.

func InputInfo 

func InputInfo(pkScript, redeemScript []byte, chainParams *chaincfg.Params) (*SpendInfo, error)

InputInfo is some basic information about the input required to spend an output. The pubkey script of the output is provided. If the pubkey script parses as P2SH or P2WSH, the redeem script must be provided.

func (*SpendInfo) VBytes 

func (nfo *SpendInfo) VBytes() uint32

VBytes is the virtual bytes of the spending transaction input. Miners use weight/4 = vbytes to calculate contribution to block size limit and therefore transaction fees.

Source Files

View all Source files

Directories

Path Synopsis

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.