dex

package
v0.6.0-rc2 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Mar 30, 2023 License: BlueOak-1.0.0 Imports: 19 Imported by: 17

Documentation

Index

Constants

View Source 
const (
	UnsupportedScriptError = ErrorKind("unsupported script type")

	BondExpiryMainnet = 30 * secondsPerDay     // 30 days
	BondExpiryTestnet = 180 * secondsPerMinute // 3 hours
	BondExpirySimnet  = 4 * secondsPerMinute   // 4 minutes
)
View Source 
const (
	LevelTrace    = slog.LevelTrace
	LevelDebug    = slog.LevelDebug
	LevelInfo     = slog.LevelInfo
	LevelWarn     = slog.LevelWarn
	LevelError    = slog.LevelError
	LevelCritical = slog.LevelCritical
	LevelOff      = slog.LevelOff

	DefaultLogLevel = LevelDebug // TODO: back to LevelInfo at some point
)

Level constants.

View Source 
const Simnet = Regtest

Simnet is an alias of Regtest.

Variables

This section is empty.

Functions

func BipIDSymbol 

func BipIDSymbol(id uint32) string

BipIDSymbol returns the BIP ID for a given symbol.

func BipSymbolID 

func BipSymbolID(symbol string) (uint32, bool)

BipSymbolID returns the asset ID associated with a given ticker symbol. While there are a number of duplicate ticker symbols in the BIP ID list (cpc, cmt, xrd, dst, one, ask, ...), those are disambiguated in the bipIDs map here, so must be referenced with their bracketed suffix.

func BondExpiry added in v0.6.0 

func BondExpiry(net Network) int64

BondExpiry returns the bond expiry duration in seconds for a given network. Once APIVersion reaches BondAPIVersion, clients should use this compiled helper function. Until then, bonds are considered experimental and the current value should be referenced from config response.

func CleanAndExpandPath added in v0.5.0 

func CleanAndExpandPath(path string) string

CleanAndExpandPath expands environment variables and leading ~ in the passed path, cleans the result, and returns it.

func FileExists added in v0.6.0 

func FileExists(name string) bool

FilesExists reports whether the named file or directory exists.

func IntDivUp added in v0.5.0 

func IntDivUp(val, div int64) int64

IntDivUp divides two integers, rounding up, without using floating point conversion. This will panic if the denominator is zero, just like regular integer division. This function should be used instead of ad hoc solutions or being lazy with floating point math.

func LockTimeMaker 

func LockTimeMaker(network Network) time.Duration

LockTimeMaker returns the maker locktime value that should be used by both client and server for the specified network. Mainnet uses a constant value while test networks support setting a custom value during build.

func LockTimeTaker 

func LockTimeTaker(network Network) time.Duration

LockTimeTaker returns the taker locktime value that should be used by both client and server for the specified network. Mainnet uses a constant value while test networks support setting a custom value during build.

func MarketName 

func MarketName(base, quote uint32) (string, error)

MarketName creates the string representation of a DEX market (e.g. "dcr_btc") given the base and quote asset indexes defined in BIP-0044. See also BipIDSymbol.

func SemverCompatible 

func SemverCompatible(required, actual Semver) bool

SemverCompatible decides if the actual version is compatible with the required one.

func SemverCompatibleAny added in v0.6.0 

func SemverCompatibleAny(compatible []Semver, actual Semver) bool

SemverCompatibleAny checks if the version is compatible with any versions in a slice of versions.

Types

type Asset 

type Asset struct {
	ID           uint32   `json:"id"`
	Symbol       string   `json:"symbol"`
	Version      uint32   `json:"version"`
	MaxFeeRate   uint64   `json:"maxFeeRate"`
	SwapSize     uint64   `json:"swapSize"`
	SwapSizeBase uint64   `json:"swapSizeBase"`         // = SwapSize for account-based assets
	RedeemSize   uint64   `json:"redeemSize,omitempty"` // Account-based assets only
	SwapConf     uint32   `json:"swapConf"`
	UnitInfo     UnitInfo `json:"unitInfo"`
}

Asset is the configurable asset variables.

type Bytes 

type Bytes []byte

Bytes is a byte slice that marshals to and unmarshals from a hexadecimal string. The default go behavior is to marshal []byte to a base-64 string.

func (Bytes) Equal added in v0.2.0 

func (b Bytes) Equal(otherB []byte) bool

Equal is true if otherB has identical []byte contents to the Bytes.

func (Bytes) MarshalJSON 

func (b Bytes) MarshalJSON() ([]byte, error)

MarshalJSON satisfies the json.Marshaller interface, and will marshal the bytes to a hex string.

func (*Bytes) Scan 

func (b *Bytes) Scan(src interface{}) error

Scan implements the sql.Scanner interface.

func (Bytes) String 

func (b Bytes) String() string

String return the hex encoding of the Bytes.

func (*Bytes) UnmarshalJSON 

func (b *Bytes) UnmarshalJSON(encHex []byte) (err error)

UnmarshalJSON satisfies the json.Unmarshaler interface, and expects a UTF-8 encoding of a hex string in double quotes.

type ConnectionMaster 

type ConnectionMaster struct {
	// contains filtered or unexported fields
}

ConnectionMaster manages a Connector.

func NewConnectionMaster 

func NewConnectionMaster(c Connector) *ConnectionMaster

NewConnectionMaster creates a new ConnectionMaster. The Connect method should be used before Disconnect. The On, Done, and Wait methods may be used at any time. However, prior to Connect, Wait and Done immediately return and signal completion, respectively.

func (*ConnectionMaster) Connect 

func (c *ConnectionMaster) Connect(ctx context.Context) (err error)

Connect connects the Connector, and returns any initial connection error. Use Disconnect to shut down the Connector. Even if Connect returns a non-nil error, On may report true until Disconnect is called. You would use Connect if the wrapped Connector has a reconnect loop to continually attempt to establish a connection even if the initial attempt fails. Use ConnectOnce if the Connector should be given one chance to connect before being considered not to be "on". If the ConnectionMaster is discarded on error, it is not important which method is used.

func (*ConnectionMaster) ConnectOnce added in v0.5.0 

func (c *ConnectionMaster) ConnectOnce(ctx context.Context) (err error)

ConnectOnce is like Connect, but on error the internal status is updated so that the On method returns false. This method may be used if an error from the Connector is terminal. The caller may also use Connect if they cancel the parent context or call Disconnect.

func (*ConnectionMaster) Disconnect 

func (c *ConnectionMaster) Disconnect()

Disconnect closes the connection and waits for shutdown. This must not be used before or concurrently with Connect.

func (*ConnectionMaster) Done added in v0.5.0 

func (c *ConnectionMaster) Done() <-chan struct{}

Done returns a channel that is closed when the Connector's WaitGroup is done. If called before Connect, a closed channel is returned.

func (*ConnectionMaster) On 

func (c *ConnectionMaster) On() bool

On indicates if the Connector is running. This returns false if never connected, or if the Connector has completed shut down.

func (*ConnectionMaster) Wait 

func (c *ConnectionMaster) Wait()

Wait waits for the Connector to shut down. It returns immediately if Connect has not been called yet.

type Connector 

type Connector interface {
	Connect(ctx context.Context) (*sync.WaitGroup, error)
}

Connector is any type that implements the Connect method, which will return a connection error, and a WaitGroup that can be waited on at Disconnection.

type Denomination added in v0.4.0 

type Denomination struct {
	Unit             string `json:"unit"`
	ConversionFactor uint64 `json:"conversionFactor"`
}

Denomination is a unit and its conversion factor.

type Error 

type Error struct {
	// contains filtered or unexported fields
}

Error pairs an error with details.

func NewError 

func NewError(err error, detail string) Error

NewError wraps the provided Error with details in a Error, facilitating the use of errors.Is and errors.As via errors.Unwrap.

func (Error) Error 

func (e Error) Error() string

Error satisfies the error interface, combining the wrapped error message with the details.

func (Error) Unwrap 

func (e Error) Unwrap() error

Unwrap returns the wrapped error, allowing errors.Is and errors.As to work.

type ErrorCloser added in v0.6.0 

type ErrorCloser struct {
	// contains filtered or unexported fields
}

ErrorCloser is used to synchronize shutdown when an error is encountered in a multi-step process. After each successful step, a shutdown routine can be scheduled with Add. If Success is not signaled before Done, the shutdown routines will be run in the reverse order that they are added.

func NewErrorCloser added in v0.6.0 

func NewErrorCloser() *ErrorCloser

NewErrorCloser creates a new ErrorCloser.

func (*ErrorCloser) Add added in v0.6.0 

func (e *ErrorCloser) Add(closer func() error)

Add adds a new function to the queue. If Success is not called before Done, the Add'ed functions will be run in the reverse order that they were added.

func (*ErrorCloser) Copy added in v0.6.0 

func (e *ErrorCloser) Copy() *ErrorCloser

Copy creates a shallow copy of the ErrorCloser.

func (*ErrorCloser) Done added in v0.6.0 

func (e *ErrorCloser) Done(log Logger)

Done signals that the ErrorClose can run its registered functions if success has not yet been flagged.

func (*ErrorCloser) Success added in v0.6.0 

func (e *ErrorCloser) Success()

Success cancels the running of any Add'ed functions.

type ErrorKind 

type ErrorKind string

ErrorKind identifies a kind of error that can be used to define new errors via const SomeError = dex.ErrorKind("something").

func (ErrorKind) Error 

func (e ErrorKind) Error() string

Error satisfies the error interface and prints human-readable errors.

type IPKey added in v0.2.0 

type IPKey [net.IPv6len]byte

IPKey is a IP address byte array.

func NewIPKey added in v0.2.0 

func NewIPKey(addr string) IPKey

NewIPKey parses an IP address string into an IPKey. For an IPV6 address, this drops the interface identifier, which is the second half of the address. The first half of the address comprises 48-bits for the prefix, which is the public topology of a network that is assigned by an ISP, and 16-bits for the Site-Level Aggregation Identifier (SLA). However, any number of the SLA bits may be assigned by a provider, potentially giving a single link the freedom to use multiple subnets, thus expanding the set of addresses they may use freely. As such, IPv6 addresses with just the interface bits masked may not be sufficient to identify a single remote uplink.

func (IPKey) IsLoopback added in v0.4.0 

func (ipk IPKey) IsLoopback() bool

IsLoopback reports whether the IPKey represents a loopback address.

func (IPKey) IsUnspecified added in v0.4.0 

func (ipk IPKey) IsUnspecified() bool

IsUnspecified reports whether the IPKey is zero (unspecified).

func (IPKey) PrefixV6 added in v0.4.0 

func (ipk IPKey) PrefixV6() *IPKey

PrefixV6 returns the first 48-bits of an IPv6 address, or nil for an IPv4 address. This may be used to identify multiple remote hosts from the same public topology but different subnets. A heuristic may be defined to treat hosts with the same prefix as the same host if there are many such hosts.

func (IPKey) String added in v0.2.0 

func (ipk IPKey) String() string

String returns a readable IP address representation of the IPKey. This is done by copying the bytes of the IPKey array, and invoking the net.(IP).String method. As such it is inefficient and should not be invoked repeatedly or in hot paths.

type Logger 

type Logger interface {
	slog.Logger
	SubLogger(name string) Logger
}

Logger is a logger. Many dcrdex types will take a logger as an argument. 

var Disabled Logger = &logger{
	Logger:  slog.Disabled,
	level:   LevelOff,
	backend: slog.NewBackend(io.Discard),
}

Disabled is a Logger that will never output anything.

func NewLogger 

func NewLogger(name string, lvl slog.Level, writer io.Writer, utc ...bool) Logger

NewLogger creates a new Logger with the given name, log level, and io.Writer.

func StdOutLogger 

func StdOutLogger(name string, lvl slog.Level, utc ...bool) Logger

StdOutLogger creates a Logger with the provided name with lvl as the log level and prints to standard out.

type LoggerMaker 

type LoggerMaker struct {
	*slog.Backend
	DefaultLevel slog.Level
	Levels       map[string]slog.Level
}

LoggerMaker allows creation of new log subsystems with predefined levels.

func NewLoggerMaker 

func NewLoggerMaker(writer io.Writer, debugLevel string, utc ...bool) (*LoggerMaker, error)

NewLoggerMaker creates a new LoggerMaker from the provided io.Writer and debug level string. See SetLevels for details on the debug level string.

func (*LoggerMaker) Level 

func (lm *LoggerMaker) Level(name string) slog.Level

Level returns the log level for the named subsystem. If a level is not configured for this subsystem, the LoggerMaker's DefaultLevel is returned.

func (*LoggerMaker) Logger 

func (lm *LoggerMaker) Logger(name string) Logger

Logger creates a logger with the provided name, using the log level for that name if it was set, otherwise the default log level. This differs from NewLogger, which does not look in the Level map for the name.

func (*LoggerMaker) NewLogger 

func (lm *LoggerMaker) NewLogger(name string, level ...slog.Level) Logger

NewLogger creates a new Logger for the subsystem with the given name. If a log level is specified, it is used for the Logger. Otherwise the DefaultLevel is used.

func (*LoggerMaker) SetLevels 

func (lm *LoggerMaker) SetLevels(debugLevel string) error

SetLevels either set the DefaultLevel or resets the Levels map for future subsystems created with the LoggerMaker.

The debugLevel string can specify a single verbosity for the entire system: "trace", "debug", "info", "warn", "error", "critical", "off". The Levels map is not modified with this syntax.

Or the verbosity can be specified for individual subsystems, separating subsystems by commas and assigning each specifically. Such a debugLevel string might look like `CORE=debug,SWAP=trace`. The DefaultLevel is not modified with this syntax.

func (*LoggerMaker) SetLevelsFromMap added in v0.5.0 

func (lm *LoggerMaker) SetLevelsFromMap(lvls map[string]slog.Level)

SetLevelsFromMap sets all logs for certain subsystems with the same name to the corresponding log level in the map.

type MarketInfo 

type MarketInfo struct {
	Name                   string
	Base                   uint32
	Quote                  uint32
	LotSize                uint64
	RateStep               uint64
	EpochDuration          uint64 // msec
	MarketBuyBuffer        float64
	MaxUserCancelsPerEpoch uint32
	BookedLotLimit         uint32
}

MarketInfo specifies a market that the Archiver must support.

func NewMarketInfo 

func NewMarketInfo(base, quote uint32, lotSize, rateStep, epochDuration uint64, marketBuyBuffer float64) (*MarketInfo, error)

NewMarketInfo creates a new market configuration (MarketInfo) from the given base and quote asset indexes, order lot size, and epoch duration in milliseconds. See also MarketName.

func NewMarketInfoFromSymbols 

func NewMarketInfoFromSymbols(base, quote string, lotSize, rateStep, epochDuration uint64, marketBuyBuffer float64) (*MarketInfo, error)

NewMarketInfoFromSymbols is like NewMarketInfo, but the base and quote assets are identified by their symbols as defined in the decred.org/dcrdex/server/asset package.

func (*MarketInfo) String added in v0.2.0 

func (mi *MarketInfo) String() string

String returns the market's Name.

type Network 

type Network uint8

Network flags passed to asset backends to signify which network to use. 

const (
	Mainnet Network = iota
	Testnet
	Regtest
)

func NetFromString 

func NetFromString(net string) (Network, error)

NetFromString returns the Network for the given network name.

func (Network) String 

func (n Network) String() string

String returns the string representation of a Network.

type Runner 

type Runner interface {
	Run(ctx context.Context)
}

Runner is satisfied by DEX subsystems, which must start any of their goroutines via the Run method.

type Semver 

type Semver struct {
	Major uint32
	Minor uint32
	Patch uint32
}

Semver models a semantic version major.minor.patch

func NewSemver 

func NewSemver(major, minor, patch uint32) Semver

NewSemver returns a new Semver with the version major.minor.patch

func (Semver) String 

func (s Semver) String() string

Semver formats the Semver as major.minor.patch (e.g. 1.2.3).

type StartStopWaiter 

type StartStopWaiter struct {
	// contains filtered or unexported fields
}

StartStopWaiter wraps a Runner, providing the non-blocking Start and Stop methods, and the blocking WaitForShutdown method.

func NewStartStopWaiter 

func NewStartStopWaiter(runner Runner) *StartStopWaiter

NewStartStopWaiter creates a StartStopWaiter from a Runner.

func (*StartStopWaiter) On 

func (cm *StartStopWaiter) On() bool

On will be true until the context is canceled.

func (*StartStopWaiter) Start 

func (ssw *StartStopWaiter) Start(ctx context.Context)

Start launches the Runner in a goroutine. Start will return immediately. Use Stop to signal the Runner to stop, followed by WaitForShutdown to allow shutdown to complete.

func (*StartStopWaiter) Stop 

func (ssw *StartStopWaiter) Stop()

Stop cancels the context.

func (*StartStopWaiter) WaitForShutdown 

func (ssw *StartStopWaiter) WaitForShutdown()

WaitForShutdown blocks until the Runner has returned in response to Stop.

type Token added in v0.5.0 

type Token struct {
	// ParentID is the asset ID of the token's parent asset.
	ParentID uint32 `json:"parentID"`
	// Name is the display name of the token asset.
	Name string `json:"name"`
	// UnitInfo is the UnitInfo for the token.
	UnitInfo UnitInfo `json:"unitInfo"`
}

Token is a generic representation of a token-type asset.

type UnitInfo added in v0.4.0 

type UnitInfo struct {
	// AtomicUnit is the name associated with the asset's integral unit of
	// measure, e.g. satoshis, atoms, gwei (for DEX purposes).
	AtomicUnit string `json:"atomicUnit"`
	// Conventional is the conventionally-used denomination.
	Conventional Denomination `json:"conventional"`
	// Alternatives lists additionally available Denominations, and can be
	// empty.
	Alternatives []Denomination `json:"denominations"`
}

UnitInfo conveys information about the units and available denominations for an asset.

func (*UnitInfo) ConventionalString added in v0.4.0 

func (ui *UnitInfo) ConventionalString(v uint64) string

ConventionalString converts the quantity to conventional units, and returns the formatted float string.

Source Files

View all Source files

Directories

Path Synopsis
networks
bch
btc
btc/test
dcr
doge
erc20
erc20/contracts/v0
eth
This file lifted from go-ethereum/signer/fourbyte at v1.10.6 commit 576681f29b895dd39e559b7ba17fcd89b42e4833 and modified to make parseCalldata take an abi instead of a string.
 This file lifted from go-ethereum/signer/fourbyte at v1.10.6 commit 576681f29b895dd39e559b7ba17fcd89b42e4833 and modified to make parseCalldata take an abi instead of a string.
eth/contracts/v0
Package v0 contains pre-generated code that should not be directly edited.
 Package v0 contains pre-generated code that should not be directly edited.
ltc
zec
Package order defines the Order and Match types used throughout the DEX.
 Package order defines the Order and Match types used throughout the DEX.
test
testing
loadbot Module

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.