pieces

package
v1.117.0-rc Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Nov 7, 2024 License: AGPL-3.0 Imports: 33 Imported by: 1

Documentation

Overview

Package pieces is responsible for the low level piece management. It also provides ways to keep track of pieces metadata.

Index

Constants

View Source 
const PieceExpirationFileNameFormat = "2006-01-02_15.dat"

PieceExpirationFileNameFormat is the format of filenames used by the piece expiration store, as interpreted by time.(*Time).Format.

View Source 
const (
	// V1PieceHeaderReservedArea is the amount of space to be reserved at the beginning of
	// pieces stored with filestore.FormatV1 or greater. Serialized piece headers should be
	// written into that space, and the remaining space afterward should be zeroes.
	// V1PieceHeaderReservedArea includes the size of the framing field
	// (v1PieceHeaderFrameSize). It has a constant size because:
	//
	//  * We do not anticipate needing more than this.
	//  * We will be able to sum up all space used by a satellite (or all satellites) without
	//    opening and reading from each piece file (stat() is faster than open()).
	//  * This simplifies piece file writing (if we needed to know the exact header size
	//    before writing, then we'd need to spool the entire contents of the piece somewhere
	//    before we could calculate the hash and size). This way, we can simply reserve the
	//    header space, write the piece content as it comes in, and then seek back to the
	//    beginning and fill in the header.
	//
	// We put it at the beginning of piece files because:
	//
	//  * If we put it at the end instead, we would have to seek to the end of a file (to find
	//    out the real size while avoiding race conditions with stat()) and then seek backward
	//    again to get the header, and then seek back to the beginning to get the content.
	//    Seeking on spinning platter hard drives is very slow compared to reading sequential
	//    bytes.
	//  * Putting the header in the middle of piece files might be entertaining, but it would
	//    also be silly.
	//  * If piece files are incorrectly truncated or not completely written, it will be
	//    much easier to identify those cases when the header is intact and findable.
	//
	// If more space than this is needed, we will need to use a new storage format version.
	V1PieceHeaderReservedArea = 512
)

Variables

View Source 
var BadFormatVersion = errs.Class("Incompatible storage format version")

BadFormatVersion is returned when a storage format cannot support the request function.

View Source 
var DefaultConfig = Config{
	WritePreallocSize:  4 * memory.MiB,
	TrashChoreInterval: 24 * time.Hour,
}

DefaultConfig is the default value for the Config.

View Source 
var ErrPieceExpiration = errs.Class("pieceexpirationstore")

ErrPieceExpiration represents errors from the piece expiration store.

View Source 
var (
	// Error is the default error class.
	Error = errs.Class("pieces error")
)
View Source 
var PathEncoding = filestore.PathEncoding

PathEncoding is used to encode satellite IDs for the piece expiration store.

Functions

func MonitorBlobWriter added in v1.90.1 

func MonitorBlobWriter(name string, writer blobstore.BlobWriter) blobstore.BlobWriter

MonitorBlobWriter wraps the original BlobWriter and measures writing time.

func MonitorHash added in v1.90.1 

func MonitorHash(name string, hash hash.Hash) hash.Hash

MonitorHash wraps the original Hash with an instance which also measures the hashing time.

Types

type BlobsUsageCache added in v0.18.0 

type BlobsUsageCache struct {
	blobstore.Blobs
	// contains filtered or unexported fields
}

BlobsUsageCache is a blob storage with a cache for storing totals of current space used.

The following names have the following meaning: - piecesTotal: the total space used by pieces, including headers - piecesContentSize: the space used by piece content, not including headers - trashTotal: the total space used in the trash, including headers

pieceTotal and pieceContentSize are the corollary for a single file.

architecture: Database

func NewBlobsUsageCache added in v0.18.0 

func NewBlobsUsageCache(log *zap.Logger, blob blobstore.Blobs) *BlobsUsageCache

NewBlobsUsageCache creates a new disk blob store with a space used cache.

func NewBlobsUsageCacheTest added in v0.18.0 

func NewBlobsUsageCacheTest(ctx *testcontext.Context, log *zap.Logger, blob blobstore.Blobs, piecesTotal, piecesContentSize, trashTotal int64, spaceUsedBySatellite map[storj.NodeID]SatelliteUsage) (*BlobsUsageCache, error)

NewBlobsUsageCacheTest creates a new disk blob store with a space used cache.

func (*BlobsUsageCache) Close added in v0.18.0 

func (blobs *BlobsUsageCache) Close() error

Close satisfies the pieces interface.

func (*BlobsUsageCache) Delete added in v0.18.0 

func (blobs *BlobsUsageCache) Delete(ctx context.Context, blobRef blobstore.BlobRef) error

Delete gets the size of the piece that is going to be deleted then deletes it and updates the space used cache accordingly.

func (*BlobsUsageCache) DeleteNamespace added in v1.96.2 

func (blobs *BlobsUsageCache) DeleteNamespace(ctx context.Context, namespace []byte) error

DeleteNamespace deletes all blobs for a satellite and updates the cache.

func (*BlobsUsageCache) DeleteWithStorageFormat added in v1.107.3 

func (blobs *BlobsUsageCache) DeleteWithStorageFormat(ctx context.Context, ref blobstore.BlobRef, formatVer blobstore.FormatVersion, sizeHint int64) error

DeleteWithStorageFormat gets the size of the piece that is going to be deleted then deletes it and updates the space used cache accordingly.

func (*BlobsUsageCache) EmptyTrash added in v0.28.3 

func (blobs *BlobsUsageCache) EmptyTrash(ctx context.Context, namespace []byte, trashedBefore time.Time) (int64, [][]byte, error)

EmptyTrash empties the trash and updates the cache.

func (*BlobsUsageCache) Recalculate added in v0.18.0 

func (blobs *BlobsUsageCache) Recalculate(
	piecesTotal,
	piecesTotalAtStart,
	piecesContentSize,
	piecesContentSizeAtStart,
	trashTotal,
	trashTotalAtStart int64,
	totalsBySatellite,
	totalsBySatelliteAtStart map[storj.NodeID]SatelliteUsage,
)

Recalculate estimates new totals for the space used cache. In order to get new totals for the space used cache, we had to iterate over all the pieces on disk. Since that can potentially take a long time, here we need to check if we missed any additions/deletions while we were iterating and estimate how many bytes missed then add those to the space used result of iteration.

func (*BlobsUsageCache) RestoreTrash added in v0.28.3 

func (blobs *BlobsUsageCache) RestoreTrash(ctx context.Context, namespace []byte) ([][]byte, error)

RestoreTrash restores the trash for the namespace and updates the cache.

func (*BlobsUsageCache) SpaceUsedBySatellite added in v0.18.0 

func (blobs *BlobsUsageCache) SpaceUsedBySatellite(ctx context.Context, satelliteID storj.NodeID) (piecesTotal int64, piecesContentSize int64, err error)

SpaceUsedBySatellite returns the current total space used for a specific satellite for all pieces.

func (*BlobsUsageCache) SpaceUsedForPieces added in v0.18.0 

func (blobs *BlobsUsageCache) SpaceUsedForPieces(ctx context.Context) (int64, int64, error)

SpaceUsedForPieces returns the current total used space for all pieces.

func (*BlobsUsageCache) SpaceUsedForTrash added in v0.28.3 

func (blobs *BlobsUsageCache) SpaceUsedForTrash(ctx context.Context) (int64, error)

SpaceUsedForTrash returns the current total used space for the trash dir.

func (*BlobsUsageCache) Stats added in v1.98.1 

func (blobs *BlobsUsageCache) Stats(cb func(key monkit.SeriesKey, field string, val float64))

Stats implements monkit.StatSource.

func (*BlobsUsageCache) TestCreateV0 added in v0.18.0 

func (blobs *BlobsUsageCache) TestCreateV0(ctx context.Context, ref blobstore.BlobRef) (_ blobstore.BlobWriter, err error)

TestCreateV0 creates a new V0 blob that can be written. This is only appropriate in test situations.

func (*BlobsUsageCache) Trash added in v0.28.3 

func (blobs *BlobsUsageCache) Trash(ctx context.Context, blobRef blobstore.BlobRef, timestamp time.Time) error

Trash moves the ref to the trash and updates the cache.

func (*BlobsUsageCache) TrashWithStorageFormat added in v1.110.3 

func (blobs *BlobsUsageCache) TrashWithStorageFormat(ctx context.Context, blobRef blobstore.BlobRef, formatVer blobstore.FormatVersion, timestamp time.Time) error

TrashWithStorageFormat marks a blob with a specific storage format for pending deletion.

func (*BlobsUsageCache) Update added in v0.18.0 

func (blobs *BlobsUsageCache) Update(ctx context.Context, satelliteID storj.NodeID, piecesTotalDelta, piecesContentSizeDelta, trashDelta int64)

Update updates the cache totals.

type CacheService added in v0.18.0 

type CacheService struct {
	Loop *sync2.Cycle

	// InitFence is released once the cache's Run method returns or when it has
	// completed the scan and persisted the data to the database.
	// This is useful for testing.
	InitFence sync2.Fence
	// contains filtered or unexported fields
}

CacheService updates the space used cache.

architecture: Chore

func NewService added in v0.18.0 

func NewService(log *zap.Logger, usageCache *BlobsUsageCache, pieces *Store, spaceUsedDB PieceSpaceUsedDB, interval time.Duration, pieceScanOnStartup bool) *CacheService

NewService creates a new cache service that updates the space usage cache on startup and syncs the cache values to persistent storage on an interval.

func (*CacheService) Close added in v0.18.0 

func (service *CacheService) Close() (err error)

Close closes the loop.

func (*CacheService) Init added in v0.18.0 

func (service *CacheService) Init(ctx context.Context) (err error)

Init initializes the space used cache with the most recent values that were stored persistently.

func (*CacheService) PersistCacheTotals added in v0.18.0 

func (service *CacheService) PersistCacheTotals(ctx context.Context) error

PersistCacheTotals saves the current totals of the space used cache to the database so that if the storagenode restarts it can retrieve the latest space used values without needing to recalculate since that could take a long time.

func (*CacheService) Run added in v0.18.0 

func (service *CacheService) Run(ctx context.Context) (err error)

Run recalculates the space used cache once and also runs a loop to sync the space used cache to persistent storage on an interval.

type Config added in v1.4.1 

type Config struct {
	FileStatCache        string      `` /* 131-byte string literal not displayed */
	WritePreallocSize    memory.Size `help:"deprecated" default:"4MiB"`
	DeleteToTrash        bool        `` /* 176-byte string literal not displayed */
	EnableLazyFilewalker bool        `` /* 131-byte string literal not displayed */

	EnableFlatExpirationStore        bool          `help:"use flat files for the piece expiration store instead of a sqlite database" default:"true"`
	FlatExpirationStoreFileHandles   int           `help:"number of concurrent file handles to use for the flat expiration store" default:"1000"`
	FlatExpirationStorePath          string        `help:"where to store flat piece expiration files, relative to the data directory" default:"piece_expirations"`
	FlatExpirationStoreMaxBufferTime time.Duration `help:"maximum time to buffer writes to the flat expiration store before flushing" default:"5m"`
	FlatExpirationIncludeSQLite      bool          `` /* 128-byte string literal not displayed */

	TrashChoreInterval time.Duration `help:"how often to empty check the trash, and delete old files" default:"24h"`
}

Config is configuration for Store.

type DeleteRequest added in v1.4.1 

type DeleteRequest struct {
	SatelliteID storj.NodeID
	PieceID     storj.PieceID
	QueueTime   time.Time
}

DeleteRequest contains information to delete piece.

type Deleter added in v1.4.1 

type Deleter struct {
	// contains filtered or unexported fields
}

Deleter is a worker that processes requests to delete groups of pieceIDs. Deletes are processed "best-effort" asynchronously, and any errors are logged.

func NewDeleter added in v1.4.1 

func NewDeleter(log *zap.Logger, store *Store, numWorkers int, queueSize int) *Deleter

NewDeleter creates a new Deleter.

func (*Deleter) Close added in v1.4.1 

func (d *Deleter) Close() error

Close stops all the workers and waits for them to finish.

func (*Deleter) Enqueue added in v1.4.1 

func (d *Deleter) Enqueue(ctx context.Context, satelliteID storj.NodeID, pieceIDs []storj.PieceID) (unhandled int)

Enqueue adds the pieceIDs to the delete queue. If the queue is full deletes are not processed and will be left for garbage collection. Enqueue returns true if all pieceIDs were successfully placed on the queue, false if some pieceIDs were dropped.

func (*Deleter) Run added in v1.4.1 

func (d *Deleter) Run(ctx context.Context) error

Run starts the delete workers.

func (*Deleter) SetupTest added in v1.4.1 

func (d *Deleter) SetupTest()

SetupTest puts the deleter in test mode. This should only be called in tests.

func (*Deleter) Wait added in v1.4.1 

func (d *Deleter) Wait(ctx context.Context)

Wait blocks until the queue is empty and each enqueued delete has been successfully processed.

type ExpiredInfo added in v0.11.0 

type ExpiredInfo struct {
	SatelliteID storj.NodeID
	PieceID     storj.PieceID

	// PieceSize is the size of the piece that was stored with the piece ID; if not zero, this
	// can be used to decrement the used space counters instead of calling os.Stat on the piece.
	PieceSize int64

	// This can be removed when we no longer need to support the pieceinfo db. Its only purpose
	// is to keep track of whether expired entries came from piece_expirations or pieceinfo.
	InPieceInfo bool
}

ExpiredInfo is a fully namespaced piece id.

type FileWalker added in v1.77.2 

type FileWalker struct {
	// contains filtered or unexported fields
}

FileWalker implements methods to walk over pieces in a storage directory.

func NewFileWalker added in v1.77.2 

func NewFileWalker(log *zap.Logger, blobs blobstore.Blobs, v0PieceInfoDB V0PieceInfoDB, gcProgressDB GCFilewalkerProgressDB, usedSpaceDB UsedSpacePerPrefixDB) *FileWalker

NewFileWalker creates a new FileWalker.

func (*FileWalker) WalkAndComputeSpaceUsedBySatellite added in v1.78.1 

func (fw *FileWalker) WalkAndComputeSpaceUsedBySatellite(ctx context.Context, satelliteID storj.NodeID) (satPiecesTotal int64, satPiecesContentSize int64, satPieceCount int64, err error)

WalkAndComputeSpaceUsedBySatellite walks over all pieces for a given satellite, adds up and returns the total space used.

func (*FileWalker) WalkAndComputeSpaceUsedBySatelliteWithWalkFunc added in v1.114.2 

func (fw *FileWalker) WalkAndComputeSpaceUsedBySatelliteWithWalkFunc(ctx context.Context, satelliteID storj.NodeID, walkFunc func(StoredPieceAccess) error) (satPiecesTotal int64, satPiecesContentSize int64, satPieceCount int64, err error)

WalkAndComputeSpaceUsedBySatelliteWithWalkFunc walks over all pieces for a given satellite, adds up and returns the total space used. It also calls the walkFunc for each piece. This is useful for testing purposes. Call this method with a walkFunc that collects information about each piece.

func (*FileWalker) WalkCleanupTrash added in v1.100.2 

func (fw *FileWalker) WalkCleanupTrash(ctx context.Context, satelliteID storj.NodeID, dateBefore time.Time) (bytesDeleted int64, keysDeleted []storj.PieceID, err error)

WalkCleanupTrash looks at all trash per-day directories owned by the given satellite and recursively deletes any of them that correspond to a time before the given dateBefore.

This method returns the number of blobs deleted, the total count of bytes occupied by those deleted blobs, and the number of bytes which were freed by the deletion (including filesystem overhead).

func (*FileWalker) WalkSatellitePieces added in v1.77.2 

func (fw *FileWalker) WalkSatellitePieces(ctx context.Context, satellite storj.NodeID, skipPrefixFn blobstore.SkipPrefixFn, fn func(StoredPieceAccess) error) (err error)

WalkSatellitePieces executes walkFunc for each locally stored piece in the namespace of the given satellite. If walkFunc returns a non-nil error, WalkSatellitePieces will stop iterating and return the error immediately. The ctx parameter is intended specifically to allow canceling iteration early.

Note that this method includes all locally stored pieces, both V0 and higher. The startPrefix parameter can be used to start the iteration at a specific prefix. If startPrefix is empty, the iteration starts at the beginning of the namespace.

func (*FileWalker) WalkSatellitePiecesToTrash added in v1.79.1 

func (fw *FileWalker) WalkSatellitePiecesToTrash(ctx context.Context, satelliteID storj.NodeID, createdBefore time.Time, filter *bloomfilter.Filter, trashFunc func(pieceID storj.PieceID) error) (piecesCount, piecesSkipped int64, err error)

WalkSatellitePiecesToTrash walks the satellite pieces and moves the pieces that are trash to the trash using the trashFunc provided

------------------------------------------------------------------------------------------------

On the correctness of using access.ModTime() in place of the more precise access.CreationTime():

------------------------------------------------------------------------------------------------

Background: for pieces not stored with storage.FormatV0, the access.CreationTime() value can only be retrieved by opening the piece file, and reading and unmarshaling the piece header. This is far slower than access.ModTime(), which gets the file modification time from the file system and only needs to do a stat(2) on the piece file. If we can make Retain() work with ModTime, we should.

Possibility of mismatch: We do not force or require piece file modification times to be equal to or close to the CreationTime specified by the uplink, but we do expect that piece files will be written to the filesystem _after_ the CreationTime. We make the assumption already that storage nodes and satellites and uplinks have system clocks that are very roughly in sync (that is, they are out of sync with each other by less than an hour of real time, or whatever is configured as MaxTimeSkew). So if an uplink is not lying about CreationTime and it uploads a piece that makes it to a storagenode's disk as quickly as possible, even in the worst-synchronized-clocks case we can assume that `ModTime > (CreationTime - MaxTimeSkew)`. We also allow for storage node operators doing file system manipulations after a piece has been written. If piece files are copied between volumes and their attributes are not preserved, it will be possible for their modification times to be changed to something later in time. This still preserves the inequality relationship mentioned above, `ModTime > (CreationTime - MaxTimeSkew)`. We only stipulate that storage node operators must not artificially change blob file modification times to be in the past.

If there is a mismatch: in most cases, a mismatch between ModTime and CreationTime has no effect. In certain remaining cases, the only effect is that a piece file which _should_ be garbage collected survives until the next round of garbage collection. The only really problematic case is when there is a relatively new piece file which was created _after_ this node's Retain bloom filter started being built on the satellite, and is recorded in this storage node's blob store before the Retain operation has completed. Then, it might be possible for that new piece to be garbage collected incorrectly, because it does not show up in the bloom filter and the node incorrectly thinks that it was created before the bloom filter. But if the uplink is not lying about CreationTime and its clock drift versus the storage node is less than `MaxTimeSkew`, and the ModTime on a blob file is correctly set from the storage node system time, then it is still true that `ModTime > (CreationTime - MaxTimeSkew)`.

The rule that storage node operators need to be aware of is only this: do not artificially set mtimes on blob files to be in the past. Let the filesystem manage mtimes. If blob files need to be moved or copied between locations, and this updates the mtime, that is ok. A secondary effect of this rule is that if the storage node's system clock needs to be changed forward by a nontrivial amount, mtimes on existing blobs should also be adjusted (by the same interval, ideally, but just running "touch" on all blobs is sufficient to avoid incorrect deletion of data).

type GCFilewalkerProgress added in v1.100.2 

type GCFilewalkerProgress struct {
	Prefix                   string
	SatelliteID              storj.NodeID
	BloomfilterCreatedBefore time.Time
}

GCFilewalkerProgress keeps track of the GC filewalker progress.

type GCFilewalkerProgressDB added in v1.100.2 

type GCFilewalkerProgressDB interface {
	// Store stores the GC filewalker progress.
	Store(ctx context.Context, progress GCFilewalkerProgress) error
	// Get returns the GC filewalker progress for the satellite.
	Get(ctx context.Context, satelliteID storj.NodeID) (GCFilewalkerProgress, error)
	// Reset resets the GC filewalker progress for the satellite.
	Reset(ctx context.Context, satelliteID storj.NodeID) error
}

GCFilewalkerProgressDB is used to store intermediate progress to resume garbage collection after restarting the node.

type Info 

type Info struct {
	SatelliteID storj.NodeID

	PieceID         storj.PieceID
	PieceSize       int64
	PieceCreation   time.Time
	PieceExpiration time.Time

	OrderLimit      *pb.OrderLimit
	UplinkPieceHash *pb.PieceHash
}

Info contains all the information we need to know about a Piece to manage them.

type MonitoredBlobWriter added in v1.90.1 

type MonitoredBlobWriter struct {
	blobstore.BlobWriter
	// contains filtered or unexported fields
}

MonitoredBlobWriter is a blobstore.BlobWriter wrapper with additional Monkit metrics.

func (*MonitoredBlobWriter) Cancel added in v1.90.1 

func (m *MonitoredBlobWriter) Cancel(ctx context.Context) error

Cancel implements io.Write.

func (*MonitoredBlobWriter) Commit added in v1.90.1 

func (m *MonitoredBlobWriter) Commit(ctx context.Context) error

Commit implements io.Commit.

func (*MonitoredBlobWriter) Write added in v1.90.1 

func (m *MonitoredBlobWriter) Write(p []byte) (n int, err error)

Write implements io.Write.

type MonitoredHash added in v1.90.1 

type MonitoredHash struct {
	hash.Hash
	// contains filtered or unexported fields
}

MonitoredHash is a hash.Hash wrapper with additional Monkit metrics.

func (*MonitoredHash) Reset added in v1.90.1 

func (m *MonitoredHash) Reset()

Reset implements hash.Hash.

func (*MonitoredHash) Sum added in v1.90.1 

func (m *MonitoredHash) Sum(b []byte) []byte

Sum implements hash.Hash.

func (*MonitoredHash) Write added in v1.90.1 

func (m *MonitoredHash) Write(p []byte) (n int, err error)

Write implements io.Writer.

type PieceExpirationConfig added in v1.113.1 

type PieceExpirationConfig struct {
	// DataDir is the directory where piece expiration data is stored.
	DataDir string
	// ConcurrentFileHandles is the number of concurrent file handles to use.
	// If more than this number are requested, the least recently used will
	// be closed and evicted.
	ConcurrentFileHandles int
	// MaxBufferTime is the maximum amount of time before piece expiration
	// data is flushed, regardless of how full the buffer is.
	MaxBufferTime time.Duration
}

PieceExpirationConfig contains configuration for the piece expiration store.

type PieceExpirationDB added in v0.18.0 

type PieceExpirationDB interface {
	// SetExpiration sets an expiration time for the given piece ID on the given satellite. If pieceSize
	// is non-zero, it may be used later to decrement the used space counters without needing to call
	// os.Stat on the piece.
	SetExpiration(ctx context.Context, satellite storj.NodeID, pieceID storj.PieceID, expiresAt time.Time, pieceSize int64) error
	// GetExpired gets piece IDs that expire or have expired before the given time
	GetExpired(ctx context.Context, expiresBefore time.Time, batchSize int) ([]ExpiredInfo, error)
	// DeleteExpirations deletes approximately all the expirations that happen before the given time
	DeleteExpirations(ctx context.Context, expiresAt time.Time) error
	// DeleteExpirationsBatch deletes the pieces in the batch
	DeleteExpirationsBatch(ctx context.Context, now time.Time, limit int) error
}

PieceExpirationDB stores information about pieces with expiration dates.

architecture: Database

type PieceExpirationStore added in v1.113.1 

type PieceExpirationStore struct {
	// contains filtered or unexported fields
}

PieceExpirationStore tracks piece expiration times by storing piece IDs in per-satellite flat files named by the hour they expire.

func NewPieceExpirationStore added in v1.113.1 

func NewPieceExpirationStore(log *zap.Logger, chainedStore PieceExpirationDB, config PieceExpirationConfig) (*PieceExpirationStore, error)

NewPieceExpirationStore creates a new piece expiration store.

func (*PieceExpirationStore) Close added in v1.113.1 

func (peStore *PieceExpirationStore) Close() error

Close closes the piece expiration store, and all underlying file handles.

func (*PieceExpirationStore) DeleteExpirations added in v1.113.1 

func (peStore *PieceExpirationStore) DeleteExpirations(ctx context.Context, expiresAt time.Time) (err error)

DeleteExpirations deletes information about piece expirations before the given time.

func (*PieceExpirationStore) DeleteExpirationsBatch added in v1.113.1 

func (peStore *PieceExpirationStore) DeleteExpirationsBatch(ctx context.Context, now time.Time, limit int) error

DeleteExpirationsBatch removes expiration records for pieces that have expired before the given time. The limit is not applied, as it does not make sense for this implementation.

func (*PieceExpirationStore) DeleteExpirationsForSatellite added in v1.113.1 

func (peStore *PieceExpirationStore) DeleteExpirationsForSatellite(ctx context.Context, satellite storj.NodeID, now time.Time) (err error)

DeleteExpirationsForSatellite deletes information about piece expirations before the given time for a specific satellite.

func (*PieceExpirationStore) GetExpired added in v1.113.1 

func (peStore *PieceExpirationStore) GetExpired(ctx context.Context, now time.Time, limit int) (infos []ExpiredInfo, err error)

GetExpired gets piece IDs that expire or have expired before the given time.

func (*PieceExpirationStore) GetExpiredForSatellite added in v1.113.1 

func (peStore *PieceExpirationStore) GetExpiredForSatellite(ctx context.Context, satellite storj.NodeID, now time.Time) (infos []ExpiredInfo, err error)

GetExpiredForSatellite gets piece IDs that expire or have expired before the given time for a specific satellite.

func (*PieceExpirationStore) SetExpiration added in v1.113.1 

func (peStore *PieceExpirationStore) SetExpiration(ctx context.Context, satellite storj.NodeID, pieceID storj.PieceID, expiresAt time.Time, pieceSize int64) (err error)

SetExpiration sets an expiration time for the given piece ID on the given satellite.

type PieceSpaceUsedDB added in v0.18.0 

type PieceSpaceUsedDB interface {
	// Init creates the one total and trash record if it doesn't already exist
	Init(ctx context.Context) error
	// GetPieceTotals returns the space used (total and contentSize) by all pieces stored
	GetPieceTotals(ctx context.Context) (piecesTotal int64, piecesContentSize int64, err error)
	// GetPieceTotalsForAllSatellites returns how much total space used by pieces stored for each satelliteID
	GetPieceTotalsForAllSatellites(ctx context.Context) (map[storj.NodeID]SatelliteUsage, error)
	// UpdatePieceTotalsForAllSatellites updates each record for total spaced used with a new value for each satelliteID
	UpdatePieceTotalsForAllSatellites(ctx context.Context, newTotalsBySatellites map[storj.NodeID]SatelliteUsage) error
	// UpdatePieceTotalsForSatellite updates record with new values for a specific satelliteID.
	// If the usage values are set to zero, the record is deleted.
	UpdatePieceTotalsForSatellite(ctx context.Context, satelliteID storj.NodeID, usage SatelliteUsage) error
	// GetTrashTotal returns the total space used by trash
	GetTrashTotal(ctx context.Context) (int64, error)
	// UpdateTrashTotal updates the record for total spaced used for trash with a new value
	UpdateTrashTotal(ctx context.Context, newTotal int64) error
}

PieceSpaceUsedDB stores the most recent totals from the space used cache.

architecture: Database

type PrefixUsedSpace added in v1.100.2 

type PrefixUsedSpace struct {
	Prefix           string
	SatelliteID      storj.NodeID
	TotalBytes       int64
	TotalContentSize int64
	PieceCounts      int64
	LastUpdated      time.Time
}

PrefixUsedSpace contains the used space information of a prefix.

type Reader 

type Reader struct {
	// contains filtered or unexported fields
}

Reader implements a piece reader that reads content from blob store.

func NewReader 

func NewReader(blob blobstore.BlobReader) (*Reader, error)

NewReader creates a new reader for blobstore.BlobReader.

func (*Reader) Close 

func (r *Reader) Close() error

Close closes the reader.

func (*Reader) GetPieceHeader added in v0.18.0 

func (r *Reader) GetPieceHeader() (*pb.PieceHeader, error)

GetPieceHeader reads, unmarshals, and returns the piece header. It may only be called once, before any Read() calls.

Retrieving the header at any time could be supported, but for the sake of performance we need to understand why and how often that would happen.

func (*Reader) Read 

func (r *Reader) Read(data []byte) (int, error)

Read reads data from the underlying blob, buffering as necessary.

func (*Reader) ReadAt 

func (r *Reader) ReadAt(data []byte, offset int64) (int, error)

ReadAt reads data at the specified offset, which is relative to the piece content, not the underlying blob. The piece header is not reachable by this method.

func (*Reader) Seek 

func (r *Reader) Seek(offset int64, whence int) (int64, error)

Seek seeks to the specified location within the piece content (ignoring the header).

func (*Reader) Size 

func (r *Reader) Size() int64

Size returns the amount of data in the piece.

func (*Reader) StorageFormatVersion added in v0.18.0 

func (r *Reader) StorageFormatVersion() blobstore.FormatVersion

StorageFormatVersion returns the storage format version of the piece being read.

type SatelliteUsage added in v0.31.0 

type SatelliteUsage struct {
	Total       int64 // the total space used (including headers)
	ContentSize int64 // only content size used (excluding things like headers)
}

SatelliteUsage contains information of how much space is used by a satellite.

type StorageStatus 

type StorageStatus struct {
	// DiskTotal is the actual disk size (not just the allocated disk space), in bytes.
	DiskTotal int64
	DiskUsed  int64
	// DiskFree is the actual amount of free space on the whole disk, not just allocated disk space, in bytes.
	DiskFree int64
}

StorageStatus contains information about the disk store is using.

type Store 

type Store struct {
	Filewalker *FileWalker
	// contains filtered or unexported fields
}

Store implements storing pieces onto a blob storage implementation.

architecture: Database

func NewStore 

func NewStore(log *zap.Logger, fw *FileWalker, lazyFilewalker *lazyfilewalker.Supervisor, blobs blobstore.Blobs, v0PieceInfo V0PieceInfoDB, expirationInfo PieceExpirationDB, config Config) *Store

NewStore creates a new piece store.

func (*Store) CheckWritability added in v1.12.1 

func (store *Store) CheckWritability(ctx context.Context) error

CheckWritability tests writability of the storage directory by creating and deleting a file.

func (*Store) CheckWritabilityWithTimeout added in v1.75.2 

func (store *Store) CheckWritabilityWithTimeout(ctx context.Context, timeout time.Duration) error

CheckWritabilityWithTimeout tests writability of the storage directory by creating and deleting a file with a timeout.

func (*Store) CreateVerificationFile added in v1.11.1 

func (store *Store) CreateVerificationFile(ctx context.Context, id storj.NodeID) error

CreateVerificationFile creates a file to be used for storage directory verification.

func (*Store) Delete 

func (store *Store) Delete(ctx context.Context, satellite storj.NodeID, pieceID storj.PieceID) (err error)

Delete deletes the specified piece.

func (*Store) DeleteExpiredBatchSkipV0 added in v1.110.1 

func (store *Store) DeleteExpiredBatchSkipV0(ctx context.Context, expireAt time.Time, limit int) (err error)

DeleteExpiredBatchSkipV0 deletes the pieces in the batch skipping V0 format and pieceinfo database.

func (*Store) DeleteExpiredV0 added in v1.110.1 

func (store *Store) DeleteExpiredV0(ctx context.Context, expiresAt time.Time) (err error)

DeleteExpiredV0 deletes all pieces with an expiration earlier than the provided time.

func (*Store) DeleteSatelliteBlobs added in v1.8.1 

func (store *Store) DeleteSatelliteBlobs(ctx context.Context, satellite storj.NodeID) (err error)

DeleteSatelliteBlobs deletes blobs folder of specific satellite after successful GE.

func (*Store) DeleteSkipV0 added in v1.104.1 

func (store *Store) DeleteSkipV0(ctx context.Context, satellite storj.NodeID, pieceID storj.PieceID, pieceSize int64) (err error)

DeleteSkipV0 deletes the specified piece skipping V0 format and pieceinfo database.

func (*Store) EmptyTrash added in v0.27.0 

func (store *Store) EmptyTrash(ctx context.Context, satelliteID storj.NodeID, trashedBefore time.Time) (err error)

EmptyTrash deletes pieces in the trash that have been in there longer than trashExpiryInterval.

func (*Store) GetExpired added in v0.18.0 

func (store *Store) GetExpired(ctx context.Context, expiredAt time.Time) (info []ExpiredInfo, err error)

GetExpired gets piece IDs that are expired and were created before the given time.

func (*Store) GetExpiredBatchSkipV0 added in v1.110.1 

func (store *Store) GetExpiredBatchSkipV0(ctx context.Context, expiredAt time.Time, batchSize int) (batch []ExpiredInfo, err error)

GetExpiredBatchSkipV0 gets piece IDs that are expired and were created before the given time limiting the number of pieces returned to the batch size. This method skips V0 pieces.

func (*Store) GetHashAndLimit added in v0.26.0 

func (store *Store) GetHashAndLimit(ctx context.Context, satellite storj.NodeID, pieceID storj.PieceID, reader *Reader) (pb.PieceHash, pb.OrderLimit, error)

GetHashAndLimit returns the PieceHash and OrderLimit associated with the specified piece. The piece must already have been opened for reading, and the associated *Reader passed in.

Once we have migrated everything off of V0 storage and no longer need to support it, this can cleanly become a method directly on *Reader and will need only the 'pieceID' parameter.

func (*Store) GetV0PieceInfo added in v0.26.0 

func (store *Store) GetV0PieceInfo(ctx context.Context, satellite storj.NodeID, pieceID storj.PieceID) (*Info, error)

GetV0PieceInfo fetches the Info record from the V0 piece info database. Obviously, of no use when a piece does not have filestore.FormatV0 storage.

func (*Store) MigrateV0ToV1 added in v0.25.0 

func (store *Store) MigrateV0ToV1(ctx context.Context, satelliteID storj.NodeID, pieceID storj.PieceID) (err error)

MigrateV0ToV1 will migrate a piece stored with storage format v0 to storage format v1. If the piece is not stored as a v0 piece it will return an error. The follow failures are possible:

  • sql.ErrNoRows if the v0pieceInfoDB was corrupted or recreated.
  • Fail to open or read v0 piece. In this case no artifacts remain.
  • Fail to Write or Commit v1 piece. In this case no artifacts remain.
  • Fail to Delete v0 piece. In this case v0 piece may remain, but v1 piece will exist and be preferred in future calls.

func (*Store) Reader 

func (store *Store) Reader(ctx context.Context, satellite storj.NodeID, pieceID storj.PieceID) (_ *Reader, err error)

Reader returns a new piece reader.

func (*Store) RestoreTrash added in v0.27.0 

func (store *Store) RestoreTrash(ctx context.Context, satelliteID storj.NodeID) (err error)

RestoreTrash restores all pieces in the trash.

func (*Store) SetExpiration added in v0.18.0 

func (store *Store) SetExpiration(ctx context.Context, satellite storj.NodeID, pieceID storj.PieceID, expiresAt time.Time, pieceSize int64) (err error)

SetExpiration records an expiration time for the specified piece ID owned by the specified satellite.

func (*Store) SpaceUsedBySatellite added in v0.18.0 

func (store *Store) SpaceUsedBySatellite(ctx context.Context, satelliteID storj.NodeID) (piecesTotal, piecesContentSize int64, err error)

SpaceUsedBySatellite calculates *an approximation of* how much disk space is used for local piece storage in the given satellite's namespace. This is an approximation because changes may be being applied to the filestore as this information is collected, and because it is possible that various errors in directory traversal could cause this count to be undersized.

This returns both the total size of pieces plus the contentSize of pieces.

func (*Store) SpaceUsedForPieces added in v0.18.0 

func (store *Store) SpaceUsedForPieces(ctx context.Context) (piecesTotal int64, piecesContentSize int64, err error)

SpaceUsedForPieces returns *an approximation of* the disk space used by all local pieces (both V0 and later). This is an approximation because changes may be being applied to the filestore as this information is collected, and because it is possible that various errors in directory traversal could cause this count to be undersized.

Returns: - piecesTotal: the total space used by pieces, including headers - piecesContentSize: the space used by piece content, not including headers

This returns both the total size of pieces plus the contentSize of pieces.

func (*Store) SpaceUsedForPiecesAndTrash added in v0.28.3 

func (store *Store) SpaceUsedForPiecesAndTrash(ctx context.Context) (int64, error)

SpaceUsedForPiecesAndTrash returns the total space used by both active pieces and the trash directory.

func (*Store) SpaceUsedForTrash added in v0.28.3 

func (store *Store) SpaceUsedForTrash(ctx context.Context) (int64, error)

SpaceUsedForTrash returns the total space used by the the piece store's trash, including all headers.

func (*Store) SpaceUsedTotalAndBySatellite added in v0.18.0 

func (store *Store) SpaceUsedTotalAndBySatellite(ctx context.Context) (piecesTotal, piecesContentSize int64, totalBySatellite map[storj.NodeID]SatelliteUsage, err error)

SpaceUsedTotalAndBySatellite adds up the space used by and for all satellites for blob storage.

func (*Store) Stat added in v1.69.2 

func (store *Store) Stat(ctx context.Context, satellite storj.NodeID, pieceID storj.PieceID) (blobstore.BlobInfo, error)

Stat looks up disk metadata on the blob file.

func (*Store) StorageStatus 

func (store *Store) StorageStatus(ctx context.Context) (_ StorageStatus, err error)

StorageStatus returns information about the disk.

func (*Store) Trash added in v0.27.0 

func (store *Store) Trash(ctx context.Context, satellite storj.NodeID, pieceID storj.PieceID, timestamp time.Time) (err error)

Trash moves the specified piece to the blob trash. If necessary, it converts the v0 piece to a v1 piece. It also marks the item as "trashed" in the pieceExpirationDB.

func (*Store) TryRestoreTrashPiece added in v1.88.2 

func (store *Store) TryRestoreTrashPiece(ctx context.Context, satellite storj.NodeID, pieceID storj.PieceID) (err error)

TryRestoreTrashPiece attempts to restore a piece from the trash. It returns nil if the piece was restored, or an error if the piece was not in the trash.

func (*Store) VerifyStorageDir added in v1.11.1 

func (store *Store) VerifyStorageDir(ctx context.Context, id storj.NodeID) error

VerifyStorageDir verifies that the storage directory is correct by checking for the existence and validity of the verification file.

func (*Store) VerifyStorageDirWithTimeout added in v1.75.2 

func (store *Store) VerifyStorageDirWithTimeout(ctx context.Context, id storj.NodeID, timeout time.Duration) error

VerifyStorageDirWithTimeout verifies that the storage directory is correct by checking for the existence and validity of the verification file. It uses the provided timeout for the operation.

func (*Store) WalkAndComputeSpaceUsedBySatellite added in v1.110.1 

func (store *Store) WalkAndComputeSpaceUsedBySatellite(ctx context.Context, satelliteID storj.NodeID, lowerIOPriority bool) (piecesTotal, piecesContentSize int64, err error)

WalkAndComputeSpaceUsedBySatellite walks over all pieces for a given satellite, adds up and returns the total space used.

func (*Store) WalkSatellitePieces added in v0.18.0 

func (store *Store) WalkSatellitePieces(ctx context.Context, satellite storj.NodeID, walkFunc func(StoredPieceAccess) error) (err error)

WalkSatellitePieces wraps FileWalker.WalkSatellitePieces.

func (*Store) WalkSatellitePiecesToTrash added in v1.100.2 

func (store *Store) WalkSatellitePiecesToTrash(ctx context.Context, satelliteID storj.NodeID, createdBefore time.Time, filter *bloomfilter.Filter, trashFunc func(pieceID storj.PieceID) error) (piecesCount, piecesSkipped int64, err error)

WalkSatellitePiecesToTrash walks the satellite pieces and moves the pieces that are trash to the trash using the trashFunc provided.

If the lazy filewalker is enabled, it will be used to find the pieces to trash, otherwise the regular filewalker will be used. If the lazy filewalker fails, the regular filewalker will be used as a fallback.

func (*Store) WalkSatellitePiecesWithSkipPrefix added in v1.114.2 

func (store *Store) WalkSatellitePiecesWithSkipPrefix(ctx context.Context, satellite storj.NodeID, skipPrefixFn blobstore.SkipPrefixFn, walkFunc func(StoredPieceAccess) error) (err error)

WalkSatellitePiecesWithSkipPrefix is like WalkSatellitePieces, but accepts a skipPrefixFn.

func (*Store) Writer 

func (store *Store) Writer(ctx context.Context, satellite storj.NodeID, pieceID storj.PieceID, hashAlgorithm pb.PieceHashAlgorithm) (_ *Writer, err error)

Writer returns a new piece writer.

type StoreForTest added in v0.18.0 

type StoreForTest struct {
	*Store
}

StoreForTest is a wrapper around Store to be used only in test scenarios. It enables writing pieces with older storage formats.

func (StoreForTest) GetV0PieceInfoDBForTest added in v0.26.0 

func (store StoreForTest) GetV0PieceInfoDBForTest() V0PieceInfoDBForTest

GetV0PieceInfoDBForTest returns this piece-store's reference to the V0 piece info DB (or nil, if this piece-store does not have one). This is ONLY intended for use with testing functionality.

func (*StoreForTest) ReaderWithStorageFormat added in v1.77.2 

func (store *StoreForTest) ReaderWithStorageFormat(ctx context.Context, satellite storj.NodeID,
	pieceID storj.PieceID, formatVersion blobstore.FormatVersion) (_ *Reader, err error)

ReaderWithStorageFormat returns a new piece reader for a located piece, which avoids the potential need to check multiple storage formats to find the right blob.

func (StoreForTest) WriterForFormatVersion added in v0.18.0 

func (store StoreForTest) WriterForFormatVersion(ctx context.Context, satellite storj.NodeID,
	pieceID storj.PieceID, formatVersion blobstore.FormatVersion, hashAlgorithm pb.PieceHashAlgorithm) (_ *Writer, err error)

WriterForFormatVersion allows opening a piece writer with a specified storage format version. This is meant to be used externally only in test situations (thus the StoreForTest receiver type).

type StoredPieceAccess added in v0.18.0 

type StoredPieceAccess interface {
	blobstore.BlobInfo

	// PieceID gives the pieceID of the piece
	PieceID() storj.PieceID
	// Satellite gives the nodeID of the satellite which owns the piece
	Satellite() (storj.NodeID, error)
	// Size gives the size of the piece on disk, and the size of the piece
	// content (not including the piece header, if applicable)
	Size(ctx context.Context) (int64, int64, error)
	// CreationTime returns the piece creation time as given in the original PieceHash (which is
	// likely not the same as the file mtime). For non-FormatV0 pieces, this requires opening
	// the file and unmarshaling the piece header. If exact precision is not required, ModTime()
	// may be a better solution.
	CreationTime(ctx context.Context) (time.Time, error)
	// ModTime returns a less-precise piece creation time than CreationTime, but is generally
	// much faster. For non-FormatV0 pieces, this gets the piece creation time from to the
	// filesystem instead of the piece header.
	ModTime(ctx context.Context) (time.Time, error)
}

StoredPieceAccess allows inspection and manipulation of a piece during iteration with WalkSatellitePieces-type methods.

type TrashChore added in v0.27.0 

type TrashChore struct {
	Cycle *sync2.Cycle
	// contains filtered or unexported fields
}

TrashChore is the chore that periodically empties the trash.

func NewTrashChore added in v0.27.0 

func NewTrashChore(log *zap.Logger, choreInterval, trashExpiryInterval time.Duration, trust *trust.Pool, store *Store) *TrashChore

NewTrashChore instantiates a new TrashChore. choreInterval is how often this chore runs, and trashExpiryInterval is passed into the EmptyTrash method to determine which trashed pieces should be deleted.

func (*TrashChore) Close added in v0.27.0 

func (chore *TrashChore) Close() error

Close closes the chore.

func (*TrashChore) Run added in v0.27.0 

func (chore *TrashChore) Run(ctx context.Context) (err error)

Run starts the cycle.

func (*TrashChore) StartRestore added in v1.70.1 

func (chore *TrashChore) StartRestore(ctx context.Context, satellite storj.NodeID) error

StartRestore starts a satellite restore, if it hasn't already started and the chore is not shutting down.

type TrashRunOnce added in v1.116.3 

type TrashRunOnce struct {
	// contains filtered or unexported fields
}

TrashRunOnce is a helper to run the trash cleaner only once.

func NewTrashRunOnce added in v1.116.3 

func NewTrashRunOnce(log *zap.Logger, trust *trust.Pool, store *Store, trashExpiryInterval time.Duration, stop *modular.StopTrigger) *TrashRunOnce

NewTrashRunOnce creates a new TrashRunOnce.

func (*TrashRunOnce) Run added in v1.116.3 

func (t *TrashRunOnce) Run(ctx context.Context) error

Run cleans up trashes.

type UsedSpacePerPrefixDB added in v1.100.2 

type UsedSpacePerPrefixDB interface {
	// Store stores the used space per prefix.
	Store(ctx context.Context, usedSpace PrefixUsedSpace) error
	// StoreBatch stores the used space per prefix in batch.
	StoreBatch(ctx context.Context, usedSpaces []PrefixUsedSpace) error
	// Get returns the used space per prefix for the satellite, for prefixes that were updated after lastUpdated.
	Get(ctx context.Context, satelliteID storj.NodeID, lastUpdated *time.Time) ([]PrefixUsedSpace, error)
	// GetSatelliteUsedSpace returns the total used space for the satellite.
	GetSatelliteUsedSpace(ctx context.Context, satelliteID storj.NodeID) (piecesTotal, piecesContentSize, piecesCount int64, err error)
	// Delete deletes the used space per prefix for the satellite.
	Delete(ctx context.Context, satelliteID storj.NodeID) error
}

UsedSpacePerPrefixDB is used to store the intermediate progress to resume the used space calculation after restarting the node.

type V0PieceInfoDB added in v0.18.0 

type V0PieceInfoDB interface {
	// Get returns Info about a piece.
	Get(ctx context.Context, satelliteID storj.NodeID, pieceID storj.PieceID) (*Info, error)
	// Delete deletes Info about a piece.
	Delete(ctx context.Context, satelliteID storj.NodeID, pieceID storj.PieceID) error
	// GetExpired gets piece IDs stored with storage format V0 that expire or have expired
	// before the given time
	GetExpired(ctx context.Context, expiredAt time.Time) ([]ExpiredInfo, error)
	// DeleteExpirations deletes approximately all the expirations that happen before the given time
	DeleteExpirations(ctx context.Context, expiresAt time.Time) error
	// WalkSatelliteV0Pieces executes walkFunc for each locally stored piece, stored
	// with storage format V0 in the namespace of the given satellite. If walkFunc returns a
	// non-nil error, WalkSatelliteV0Pieces will stop iterating and return the error
	// immediately. The ctx parameter is intended specifically to allow canceling iteration
	// early.
	WalkSatelliteV0Pieces(ctx context.Context, blobStore blobstore.Blobs, satellite storj.NodeID, walkFunc func(StoredPieceAccess) error) error
}

V0PieceInfoDB stores meta information about pieces stored with storage format V0 (where metadata goes in the "pieceinfo" table in the storagenodedb). The actual pieces are stored behind something providing the blobstore.Blobs interface.

architecture: Database

type V0PieceInfoDBForTest added in v0.18.0 

type V0PieceInfoDBForTest interface {
	V0PieceInfoDB

	// Add inserts Info to the database. This is only a valid thing to do, now,
	// during tests, to replicate the environment of a storage node not yet fully
	// migrated to V1 storage.
	Add(context.Context, *Info) error
}

V0PieceInfoDBForTest is like V0PieceInfoDB, but adds on the Add() method so that test environments with V0 piece data can be set up.

type Writer 

type Writer struct {
	// contains filtered or unexported fields
}

Writer implements a piece writer that writes content to blob store and calculates a hash.

func NewWriter 

func NewWriter(log *zap.Logger, blobWriter blobstore.BlobWriter, blobs blobstore.Blobs, satellite storj.NodeID, hashAlgorithm pb.PieceHashAlgorithm) (*Writer, error)

NewWriter creates a new writer for blobstore.BlobWriter.

func (*Writer) Cancel 

func (w *Writer) Cancel(ctx context.Context) (err error)

Cancel deletes any temporarily written data.

func (*Writer) Commit 

func (w *Writer) Commit(ctx context.Context, pieceHeader *pb.PieceHeader) (err error)

Commit commits piece to permanent storage.

func (*Writer) Hash 

func (w *Writer) Hash() []byte

Hash returns the hash of data written so far.

func (*Writer) Size 

func (w *Writer) Size() int64

Size returns the amount of data written to the piece so far, not including the size of the piece header.

func (*Writer) Write 

func (w *Writer) Write(data []byte) (int, error)

Write writes data to the blob and calculates the hash.

Source Files

View all Source files

Directories

Path Synopsis
execwrapper

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.