config

package
v2.4.1-rc.2 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Dec 20, 2021 License: Apache-2.0 Imports: 13 Imported by: 0

Documentation

Index

Constants

View Source 
const (
	// DefaultVCenterPort is the default port used to access vCenter.
	DefaultVCenterPort string = "443"
	// DefaultGCPort is the default port used to access Supervisor Cluster.
	DefaultGCPort string = "6443"
	// DefaultCloudConfigPath is the default path of csi config file.
	DefaultCloudConfigPath = "/etc/cloud/csi-vsphere.conf"
	// DefaultGCConfigPath is the default path of GC config file.
	DefaultGCConfigPath = "/etc/cloud/pvcsi-config/cns-csi.conf"
	// SupervisorCAFilePath is the file path of certificate in Supervisor
	// Clusters. This is needed to establish VC connection.
	SupervisorCAFilePath = "/etc/vmware/wcp/tls/vmca.pem"
	// EnvVSphereCSIConfig contains the path to the CSI vSphere Config.
	EnvVSphereCSIConfig = "VSPHERE_CSI_CONFIG"
	// EnvGCConfig contains the path to the CSI GC Config.
	EnvGCConfig = "GC_CONFIG"
	// DefaultpvCSIProviderPath is the default path of pvCSI provider config.
	DefaultpvCSIProviderPath = "/etc/cloud/pvcsi-provider"
	// DefaultSupervisorFSSConfigMapName is the default name of Feature states
	// config map in Supervisor cluster. This configmap is also replicated by
	// the supervisor unto any TKGS deployed on it.
	DefaultSupervisorFSSConfigMapName = "csi-feature-states"
	// DefaultInternalFSSConfigMapName is the default name of feature states
	// config map used in pvCSI and Vanilla drivers.
	DefaultInternalFSSConfigMapName = "internal-feature-states.csi.vsphere.vmware.com"
	// DefaultCSINamespace is the default namespace for CNS-CSI and pvCSI drivers.
	DefaultCSINamespace = "vmware-system-csi"
	// DefaultCnsRegisterVolumesCleanupIntervalInMin is the default time
	// interval after which successful CnsRegisterVolumes will be cleaned up.
	// Current default value is set to 12 hours
	DefaultCnsRegisterVolumesCleanupIntervalInMin = 720
	// DefaultVolumeMigrationCRCleanupIntervalInMin is the default time interval
	// after which stale CnsVSphereVolumeMigration CRs will be cleaned up.
	// Current default value is set to 2 hours.
	DefaultVolumeMigrationCRCleanupIntervalInMin = 120
	// DefaultCSIAuthCheckIntervalInMin is the default time interval to refresh
	// DatastoreMap.
	DefaultCSIAuthCheckIntervalInMin = 5
	// DefaultCnsVolumeOperationRequestCleanupIntervalInMin is the default time
	// interval after which stale CnsVSphereVolumeMigration CRs will be cleaned up.
	// Current default value is set to 24 hours.
	DefaultCnsVolumeOperationRequestCleanupIntervalInMin = 1440
	// DefaultGlobalMaxSnapshotsPerBlockVolume is the default maximum number of block volume snapshots per volume.
	DefaultGlobalMaxSnapshotsPerBlockVolume = 3
	// MaxNumberOfTopologyCategories is the max number of topology domains/categories allowed.
	MaxNumberOfTopologyCategories = 5
	// TopologyLabelsDomain is the domain name used to identify user-defined
	// topology labels applied on the node by vSphere CSI driver.
	TopologyLabelsDomain = "topology.csi.vmware.com"
)

Variables

View Source 
var (
	// ErrUsernameMissing is returned when the provided username is empty.
	ErrUsernameMissing = errors.New("username is missing")

	// ErrPasswordMissing is returned when the provided password is empty.
	ErrPasswordMissing = errors.New("password is missing")

	// ErrInvalidVCenterIP is returned when the provided vCenter IP address is
	// missing from the provided configuration.
	ErrInvalidVCenterIP = errors.New("vsphere.conf does not have the VirtualCenter IP address specified")

	// ErrMissingVCenter is returned when the provided configuration does not
	// define any vCenters.
	ErrMissingVCenter = errors.New("no Virtual Center hosts defined")

	// ErrClusterIdCharLimit is returned when the provided cluster id is more
	// than 64 characters.
	ErrClusterIDCharLimit = errors.New("cluster id must not exceed 64 characters")

	// ErrMissingEndpoint is returned when the provided configuration does not
	// define any endpoints.
	ErrMissingEndpoint = errors.New("no Supervisor Cluster endpoint defined in Guest Cluster config")

	// ErrMissingTanzuKubernetesClusterUID is returned when the provided
	// configuration does not define any TanzuKubernetesClusterUID.
	ErrMissingTanzuKubernetesClusterUID = errors.New("no Tanzu Kubernetes Cluster UID defined in Guest Cluster config")

	// ErrInvalidNetPermission is returned when the value of Permission in
	// NetPermissions is not among the ones listed.
	ErrInvalidNetPermission = errors.New("invalid value for Permissions under NetPermission Config")
)

Errors

Functions

func FromEnv 

func FromEnv(ctx context.Context, cfg *Config) error

FromEnv initializes the provided configuration object with values obtained from environment variables. If an environment variable is set for a property that's already initialized, the environment variable's value takes precedence.

func FromEnvToGC 

func FromEnvToGC(ctx context.Context, cfg *Config) error

FromEnvToGC initializes the provided configuration object with values obtained from environment variables. If an environment variable is set for a property that's already initialized, the environment variable's value takes precedence.

func GetClusterFlavor 

func GetClusterFlavor(ctx context.Context) (cnstypes.CnsClusterFlavor, error)

GetClusterFlavor returns the cluster flavor based on the env variable set in the driver deployment file.

func GetSupervisorNamespace 

func GetSupervisorNamespace(ctx context.Context) (string, error)

GetSupervisorNamespace returns the supervisor namespace in which this guest cluster is deployed.

Types

type Config 

type Config struct {
	Global struct {
		//vCenter IP address or FQDN
		VCenterIP string
		// Kubernetes Cluster ID
		ClusterID string `gcfg:"cluster-id"`
		// vCenter username.
		User string `gcfg:"user"`
		// vCenter password in clear text.
		Password string `gcfg:"password"`
		// vCenter port.
		VCenterPort string `gcfg:"port"`
		// Specifies whether to verify the server's certificate chain. Set to true to
		// skip verification.
		InsecureFlag bool `gcfg:"insecure-flag"`
		// Specifies the path to a CA certificate in PEM format. This has no effect if
		// InsecureFlag is enabled. Optional; if not configured, the system's CA
		// certificates will be used.
		CAFile string `gcfg:"ca-file"`
		// Thumbprint specifies the certificate thumbprint to use
		// This has no effect if InsecureFlag is enabled.
		Thumbprint string `gcfg:"thumbprint"`
		// Datacenter in which Node VMs are located.
		Datacenters string `gcfg:"datacenters"`
		// CnsRegisterVolumesCleanupIntervalInMin specifies the interval after which
		// successful CnsRegisterVolumes will be cleaned up.
		CnsRegisterVolumesCleanupIntervalInMin int `gcfg:"cnsregistervolumes-cleanup-intervalinmin"`
		// VolumeMigrationCRCleanupIntervalInMin specifies the interval after which
		// stale CnsVSphereVolumeMigration CRs will be cleaned up.
		VolumeMigrationCRCleanupIntervalInMin int `gcfg:"volumemigration-cr-cleanup-intervalinmin"`
		// VCClientTimeout specifies a time limit in minutes for requests made by client
		// If not set, default will be 5 minutes
		VCClientTimeout int `gcfg:"vc-client-timeout"`
		// Cluster Distribution Name
		ClusterDistribution string `gcfg:"cluster-distribution"`

		//CSIAuthCheckIntervalInMin specifies the interval that the auth check for datastores will be trigger
		CSIAuthCheckIntervalInMin int `gcfg:"csi-auth-check-intervalinmin"`
		// CnsVolumeOperationRequestCleanupIntervalInMin specifies the interval after which
		// stale CnsVolumeOperationRequest instances will be cleaned up.
		CnsVolumeOperationRequestCleanupIntervalInMin int `gcfg:"cnsvolumeoperationrequest-cleanup-intervalinmin"`
	}

	// Multiple sets of Net Permissions applied to all file shares
	// The string can uniquely represent each Net Permissions config
	NetPermissions map[string]*NetPermissionConfig

	// Virtual Center configurations
	VirtualCenter map[string]*VirtualCenterConfig

	// Snapshot configurations.
	Snapshot SnapshotConfig

	// Guest Cluster configurations, only used by GC
	GC GCConfig

	// Labels will list the topology domains the CSI driver is expected
	// to pick up from the inventory. This info will later be used while provisioning volumes.
	Labels struct {
		// Zone and Region correspond to the vSphere categories
		// created to tag specific topology domains in the inventory.
		Zone   string `gcfg:"zone"`   // Deprecated
		Region string `gcfg:"region"` // Deprecated
		// TopologyCategories is a comma separated string of topology domains
		// which will correspond to the `Categories` the vSphere admin will
		// create in the inventory using the UI.
		// Maximum number of categories allowed is 5.
		TopologyCategories string `gcfg:"topology-categories"`
	}

	TopologyCategory map[string]*TopologyCategoryInfo
}

Config is used to read and store information from the cloud configuration file

func GetCnsconfig 

func GetCnsconfig(ctx context.Context, cfgPath string) (*Config, error)

GetCnsconfig returns Config from specified config file path.

func GetGCconfig 

func GetGCconfig(ctx context.Context, cfgPath string) (*Config, error)

GetGCconfig returns Config from specified config file path.

func ReadConfig 

func ReadConfig(ctx context.Context, config io.Reader) (*Config, error)

ReadConfig parses vSphere cloud config file and stores it into VSphereConfig. Environment variables are also checked.

func ReadGCConfig 

func ReadGCConfig(ctx context.Context, config io.Reader) (*Config, error)

ReadGCConfig parses gc config file and stores it into GCConfig. Environment variables are also checked.

type ConfigurationInfo 

type ConfigurationInfo struct {
	Cfg *Config
}

ConfigurationInfo is a struct that used to capture config param details

type FeatureStatesConfigInfo 

type FeatureStatesConfigInfo struct {
	Name      string
	Namespace string
}

FeatureStatesConfigInfo contains the details about feature states configmap

type GCConfig 

type GCConfig struct {
	// Supervisor Cluster server IP
	Endpoint string `gcfg:"endpoint"`
	// Supervisor Cluster server port
	Port string `gcfg:"port"`
	// Guest Cluster UID
	TanzuKubernetesClusterUID string `gcfg:"tanzukubernetescluster-uid"`
	// Guest Cluster Name
	TanzuKubernetesClusterName string `gcfg:"tanzukubernetescluster-name"`
	// Cluster Distribution Name
	ClusterDistribution string `gcfg:"cluster-distribution"`
}

GCConfig contains information used by guest cluster to access a supervisor cluster endpoint

type NetPermissionConfig 

type NetPermissionConfig struct {
	// Client IP address, IP range or IP subnet. Example: "10.20.30.0/24"; defaults to "*" if not specified
	Ips string `gcfg:"ips"`
	// Is it READ_ONLY, READ_WRITE or NO_ACCESS. Defaults to "READ_WRITE" if not specified
	Permissions vsanfstypes.VsanFileShareAccessType `gcfg:"permissions"`
	// Disallow root access for this IP range. Defaults to "false" if not specified
	RootSquash bool `gcfg:"rootsquash"`
}

NetPermissionConfig consists of information used to restrict the network permissions set on file share volumes

func GetDefaultNetPermission 

func GetDefaultNetPermission() *NetPermissionConfig

GetDefaultNetPermission returns the default file share net permission.

type SnapshotConfig 

type SnapshotConfig struct {
	// GlobalMaxSnapshotsPerBlockVolume specifies the maximum number of block volume snapshots per volume.
	GlobalMaxSnapshotsPerBlockVolume int `gcfg:"global-max-snapshots-per-block-volume"`
	// GranularMaxSnapshotsPerBlockVolumeInVSAN specifies the maximum number of block volume snapshots
	// per volume in VSAN datastores.
	GranularMaxSnapshotsPerBlockVolumeInVSAN int `gcfg:"granular-max-snapshots-per-block-volume-vsan"`
	// GranularMaxSnapshotsPerBlockVolumeInVVOL specifies the maximum number of block volume snapshots
	// per volume in VVOL datastores.
	GranularMaxSnapshotsPerBlockVolumeInVVOL int `gcfg:"granular-max-snapshots-per-block-volume-vvol"`
}

SnapshotConfig contains snapshot configuration.

type TopologyCategoryInfo added in v2.4.1 

type TopologyCategoryInfo struct {
	Label string `gcfg:"label"`
}

TopologyCategoryInfo contains metadata for the Zone and Region parameters under Labels section.

type VirtualCenterConfig 

type VirtualCenterConfig struct {
	// vCenter username.
	User string `gcfg:"user"`
	// vCenter password in clear text.
	Password string `gcfg:"password"`
	// vCenter port.
	VCenterPort string `gcfg:"port"`
	// True if vCenter uses self-signed cert.
	InsecureFlag bool `gcfg:"insecure-flag"`
	// Datacenter in which VMs are located.
	Datacenters string `gcfg:"datacenters"`
	// Target datastore urls for provisioning file volumes.
	TargetvSANFileShareDatastoreURLs string `gcfg:"targetvSANFileShareDatastoreURLs"`
	// TargetvSANFileShareClusters represents file service enabled vSAN clusters on which file volumes can be created.
	TargetvSANFileShareClusters string `gcfg:"targetvSANFileShareClusters"`
}

VirtualCenterConfig contains information used to access a remote vCenter endpoint.

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.