configs

package
v0.6.7-266-g9053c1e Latest Latest
Warning

This package is not in the latest version of its module.

Go to latest
Published: Oct 19, 2023 License: BSD-3-Clause Imports: 10 Imported by: 0

Documentation

Index

Constants

This section is empty.

Variables

This section is empty.

Functions

func IsNamespaceSupported

func IsNamespaceSupported(ns NamespaceType) bool

IsNamespaceSupported returns whether a namespace is available or not

func NsName

func NsName(ns NamespaceType) string

NsName converts the namespace type to its filename

Types

type Command

type Command struct {
	Path    string         `json:"path"`
	Args    []string       `json:"args"`
	Env     []string       `json:"env"`
	Dir     string         `json:"dir"`
	Timeout *time.Duration `json:"timeout"`
}

func (Command) Run

func (c Command) Run(s *specs.State) error

type CommandHook

type CommandHook struct {
	Command
}

func NewCommandHook

func NewCommandHook(cmd Command) CommandHook

NewCommandHook will execute the provided command when the hook is run.

type Config

type Config struct {
	// ParentDeathSignal specifies the signal that is sent to the container's process in the case
	// that the parent process dies.
	ParentDeathSignal int `json:"parent_death_signal"`

	// Path to a directory containing the container's root filesystem.
	Rootfs string `json:"rootfs"`

	// Namespaces specifies the container's namespaces that it should setup when cloning the init process
	// If a namespace is not provided that namespace is shared from the container's parent process
	Namespaces Namespaces `json:"namespaces"`

	// Networks specifies the container's network setup to be created
	Networks []*Network `json:"networks"`

	// Routes can be specified to create entries in the route table as the container is started
	Routes []*Route `json:"routes"`

	// AppArmorProfile specifies the profile to apply to the process running in the container and is
	// change at the time the process is execed
	AppArmorProfile string `json:"apparmor_profile,omitempty"`

	// ProcessLabel specifies the label to apply to the process running in the container.  It is
	// commonly used by selinux
	ProcessLabel string `json:"process_label,omitempty"`

	// Hooks are a collection of actions to perform at various container lifecycle events.
	// CommandHooks are serialized to JSON, but other hooks are not.
	Hooks Hooks

	// Version is the version of opencontainer specification that is supported.
	Version string `json:"version"`

	// Labels are user defined metadata that is stored in the config and populated on the state
	Labels []string `json:"labels"`
}

Config defines configuration options for executing a process inside a contained environment.

type Hook

type Hook interface {
	// Run executes the hook with the provided state.
	Run(*specs.State) error
}

type HookList

type HookList []Hook

func (HookList) RunHooks

func (hooks HookList) RunHooks(state *specs.State) error

type HookName

type HookName string
const (
	// Prestart commands are executed after the container namespaces are created,
	// but before the user supplied command is executed from init.
	// Note: This hook is now deprecated
	// Prestart commands are called in the Runtime namespace.
	Prestart HookName = "prestart"

	// CreateRuntime commands MUST be called as part of the create operation after
	// the runtime environment has been created but before the pivot_root has been executed.
	// CreateRuntime is called immediately after the deprecated Prestart hook.
	// CreateRuntime commands are called in the Runtime Namespace.
	CreateRuntime HookName = "createRuntime"

	// CreateContainer commands MUST be called as part of the create operation after
	// the runtime environment has been created but before the pivot_root has been executed.
	// CreateContainer commands are called in the Container namespace.
	CreateContainer HookName = "createContainer"

	// StartContainer commands MUST be called as part of the start operation and before
	// the container process is started.
	// StartContainer commands are called in the Container namespace.
	StartContainer HookName = "startContainer"

	// Poststart commands are executed after the container init process starts.
	// Poststart commands are called in the Runtime Namespace.
	Poststart HookName = "poststart"

	// Poststop commands are executed after the container init process exits.
	// Poststop commands are called in the Runtime Namespace.
	Poststop HookName = "poststop"
)

type Hooks

type Hooks map[HookName]HookList

func (*Hooks) MarshalJSON

func (hooks *Hooks) MarshalJSON() ([]byte, error)

func (*Hooks) UnmarshalJSON

func (hooks *Hooks) UnmarshalJSON(b []byte) error

type Namespace

type Namespace struct {
	Type NamespaceType `json:"type"`
	Path string        `json:"path"`
}

Namespace defines configuration for each namespace. It specifies an alternate path that is able to be joined via setns.

func (*Namespace) GetPath

func (n *Namespace) GetPath(pid int) string

type NamespaceType

type NamespaceType string
const (
	NEWNET NamespaceType = "NEWNET"
)

func NamespaceTypes

func NamespaceTypes() []NamespaceType

type Namespaces

type Namespaces []Namespace

func (*Namespaces) Add

func (n *Namespaces) Add(t NamespaceType, path string)

func (*Namespaces) CloneFlags

func (n *Namespaces) CloneFlags() uintptr

CloneFlags parses the container's Namespaces options to set the correct flags on clone, unshare. This function returns flags only for new namespaces.

func (*Namespaces) Contains

func (n *Namespaces) Contains(t NamespaceType) bool

func (*Namespaces) PathOf

func (n *Namespaces) PathOf(t NamespaceType) string

type Network

type Network struct {
	// Type sets the networks type, commonly veth and loopback
	Type string `json:"type"`

	// Name of the network interface
	Name string `json:"name"`

	// The bridge to use.
	Bridge string `json:"bridge"`

	// MacAddress contains the MAC address to set on the network interface
	MacAddress string `json:"mac_address"`

	// Address contains the IPv4 and mask to set on the network interface
	Address string `json:"address"`

	// Gateway sets the gateway address that is used as the default for the interface
	Gateway string `json:"gateway"`

	// IPv6Address contains the IPv6 and mask to set on the network interface
	IPv6Address string `json:"ipv6_address"`

	// IPv6Gateway sets the ipv6 gateway address that is used as the default for the interface
	IPv6Gateway string `json:"ipv6_gateway"`

	// Mtu sets the mtu value for the interface and will be mirrored on both the host and
	// container's interfaces if a pair is created, specifically in the case of type veth
	// Note: This does not apply to loopback interfaces.
	Mtu int `json:"mtu"`

	// TxQueueLen sets the tx_queuelen value for the interface and will be mirrored on both the host and
	// container's interfaces if a pair is created, specifically in the case of type veth
	// Note: This does not apply to loopback interfaces.
	TxQueueLen int `json:"txqueuelen"`

	// HostInterfaceName is a unique name of a veth pair that resides on in the host interface of the
	// container.
	HostInterfaceName string `json:"host_interface_name"`

	// HairpinMode specifies if hairpin NAT should be enabled on the virtual interface
	// bridge port in the case of type veth
	// Note: This is unsupported on some systems.
	// Note: This does not apply to loopback interfaces.
	HairpinMode bool `json:"hairpin_mode"`
}

Network defines configuration for a container's networking stack

The network configuration can be omitted from a container causing the container to be setup with the host's networking stack

type Route

type Route struct {
	// Destination specifies the destination IP address and mask in the CIDR form.
	Destination string `json:"destination"`

	// Source specifies the source IP address and mask in the CIDR form.
	Source string `json:"source"`

	// Gateway specifies the gateway IP address.
	Gateway string `json:"gateway"`

	// InterfaceName specifies the device to set this route up for, for example eth0.
	InterfaceName string `json:"interface_name"`
}

Route defines a routing table entry.

Routes can be specified to create entries in the routing table as the container is started.

All of destination, source, and gateway should be either IPv4 or IPv6. One of the three options must be present, and omitted entries will use their IP family default for the route table. For IPv4 for example, setting the gateway to 1.2.3.4 and the interface to eth0 will set up a standard destination of 0.0.0.0(or *) when viewed in the route table.

Directories

Path Synopsis

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL