framework

package
v1.15.7-beta.0 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Nov 13, 2019 License: Apache-2.0 Imports: 121 Imported by: 2,159

Documentation

Overview

Package framework contains provider-independent helper code for building and running E2E tests with Ginkgo. The actual Ginkgo test suites gets assembled by combining this framework, the optional provider support code and specific tests via a separate .go file like Kubernetes' test/e2e.go.

Index

Constants

View Source 
const (
	// EndpointHTTPPort is an endpoint HTTP port for testing.
	EndpointHTTPPort = 8080
	// EndpointUDPPort is an endpoint UDP port for testing.
	EndpointUDPPort = 8081

	// ClusterHTTPPort is a cluster HTTP port for testing.
	ClusterHTTPPort = 80
	// ClusterUDPPort is a cluster UDP port for testing.
	ClusterUDPPort = 90

	// SessionAffinityChecks is number of checks to hit a given set of endpoints when enable session affinity.
	SessionAffinityChecks = 10
	// RegexIPv4 is a regex to match IPv4 addresses
	RegexIPv4 = "(?:\\d+)\\.(?:\\d+)\\.(?:\\d+)\\.(?:\\d+)"
	// RegexIPv6 is a regex to match IPv6 addresses
	RegexIPv6 = "" /* 1910-byte string literal not displayed */
)
View Source 
const (
	// KubeProxyLagTimeout is the maximum time a kube-proxy daemon on a node is allowed
	// to not notice a Service update, such as type=NodePort.
	// TODO: This timeout should be O(10s), observed values are O(1m), 5m is very
	// liberal. Fix tracked in #20567.
	KubeProxyLagTimeout = 5 * time.Minute

	// KubeProxyEndpointLagTimeout is the maximum time a kube-proxy daemon on a node is allowed
	// to not notice an Endpoint update.
	KubeProxyEndpointLagTimeout = 30 * time.Second

	// LoadBalancerLagTimeoutDefault is the maximum time a load balancer is allowed to
	// not respond after creation.
	LoadBalancerLagTimeoutDefault = 2 * time.Minute

	// LoadBalancerLagTimeoutAWS is the delay between ELB creation and serving traffic
	// on AWS. A few minutes is typical, so use 10m.
	LoadBalancerLagTimeoutAWS = 10 * time.Minute

	// LoadBalancerCreateTimeoutDefault is the default time to wait for a load balancer to be created/modified.
	// TODO: once support ticket 21807001 is resolved, reduce this timeout back to something reasonable
	LoadBalancerCreateTimeoutDefault = 20 * time.Minute
	// LoadBalancerCreateTimeoutLarge is the maximum time to wait for a load balancer to be created/modified.
	LoadBalancerCreateTimeoutLarge = 2 * time.Hour

	// LoadBalancerCleanupTimeout is the time required by the loadbalancer to cleanup, proportional to numApps/Ing.
	// Bring the cleanup timeout back down to 5m once b/33588344 is resolved.
	LoadBalancerCleanupTimeout = 15 * time.Minute

	// LoadBalancerPollTimeout is the time required by the loadbalancer to poll.
	// On average it takes ~6 minutes for a single backend to come online in GCE.
	LoadBalancerPollTimeout = 15 * time.Minute
	// LoadBalancerPollInterval is the interval value in which the loadbalancer polls.
	LoadBalancerPollInterval = 30 * time.Second

	// LargeClusterMinNodesNumber is the number of nodes which a large cluster consists of.
	LargeClusterMinNodesNumber = 100

	// MaxNodesForEndpointsTests is the max number for testing endpoints.
	// Don't test with more than 3 nodes.
	// Many tests create an endpoint per node, in large clusters, this is
	// resource and time intensive.
	MaxNodesForEndpointsTests = 3

	// ServiceTestTimeout is used for most polling/waiting activities
	ServiceTestTimeout = 60 * time.Second

	// GCPMaxInstancesInInstanceGroup is the maximum number of instances supported in
	// one instance group on GCP.
	GCPMaxInstancesInInstanceGroup = 2000

	// AffinityConfirmCount is the number of needed continuous requests to confirm that
	// affinity is enabled.
	AffinityConfirmCount = 15
)
View Source 
const (
	// StatefulSetPoll is a poll interval for StatefulSet tests
	StatefulSetPoll = 10 * time.Second
	// StatefulSetTimeout is a timeout interval for StatefulSet operations
	StatefulSetTimeout = 10 * time.Minute
	// StatefulPodTimeout is a timeout for stateful pods to change state
	StatefulPodTimeout = 5 * time.Minute
)
View Source 
const (
	// PodListTimeout is how long to wait for the pod to be listable.
	PodListTimeout = time.Minute
	// PodStartTimeout is how long to wait for the pod to be started.
	// Initial pod start can be delayed O(minutes) by slow docker pulls.
	// TODO: Make this 30 seconds once #4566 is resolved.
	PodStartTimeout = 5 * time.Minute

	// PodStartShortTimeout is same as `PodStartTimeout` to wait for the pod to be started, but shorter.
	// Use it case by case when we are sure pod start will not be delayed.
	// minutes by slow docker pulls or something else.
	PodStartShortTimeout = 2 * time.Minute

	// PodDeleteTimeout is how long to wait for a pod to be deleted.
	PodDeleteTimeout = 5 * time.Minute

	// PodEventTimeout is how much we wait for a pod event to occur.
	PodEventTimeout = 2 * time.Minute

	// NamespaceCleanupTimeout is how long to wait for the namespace to be deleted.
	// If there are any orphaned namespaces to clean up, this test is running
	// on a long lived cluster. A long wait here is preferably to spurious test
	// failures caused by leaked resources from a previous test run.
	NamespaceCleanupTimeout = 15 * time.Minute

	// ServiceStartTimeout is how long to wait for a service endpoint to be resolvable.
	ServiceStartTimeout = 3 * time.Minute

	// Poll is how often to Poll pods, nodes and claims.
	Poll = 2 * time.Second

	// PollShortTimeout is the short timeout value in polling.
	PollShortTimeout = 1 * time.Minute
	// PollLongTimeout is the long timeout value in polling.
	PollLongTimeout = 5 * time.Minute

	// ServiceAccountProvisionTimeout is how long to wait for a service account to be provisioned.
	// service accounts are provisioned after namespace creation
	// a service account is required to support pod creation in a namespace as part of admission control
	ServiceAccountProvisionTimeout = 2 * time.Minute

	// SingleCallTimeout is how long to try single API calls (like 'get' or 'list'). Used to prevent
	// transient failures from failing tests.
	// TODO: client should not apply this timeout to Watch calls. Increased from 30s until that is fixed.
	SingleCallTimeout = 5 * time.Minute

	// NodeReadyInitialTimeout is how long nodes have to be "ready" when a test begins. They should already
	// be "ready" before the test starts, so this is small.
	NodeReadyInitialTimeout = 20 * time.Second

	// PodReadyBeforeTimeout is how long pods have to be "ready" when a test begins.
	PodReadyBeforeTimeout = 5 * time.Minute

	// ServiceRespondingTimeout is how long to wait for a service to be responding.
	ServiceRespondingTimeout = 2 * time.Minute

	// ClaimProvisionTimeout is how long claims have to become dynamically provisioned.
	ClaimProvisionTimeout = 5 * time.Minute

	// ClaimProvisionShortTimeout is same as `ClaimProvisionTimeout` to wait for claim to be dynamically provisioned, but shorter.
	// Use it case by case when we are sure this timeout is enough.
	ClaimProvisionShortTimeout = 1 * time.Minute

	// ClaimBindingTimeout is how long claims have to become bound.
	ClaimBindingTimeout = 3 * time.Minute

	// ClaimDeletingTimeout is How long claims have to become deleted.
	ClaimDeletingTimeout = 3 * time.Minute

	// PVReclaimingTimeout is how long PVs have to beome reclaimed.
	PVReclaimingTimeout = 3 * time.Minute

	// PVBindingTimeout is how long PVs have to become bound.
	PVBindingTimeout = 3 * time.Minute

	// PVDeletingTimeout is how long PVs have to become deleted.
	PVDeletingTimeout = 3 * time.Minute

	// RecreateNodeReadyAgainTimeout is how long a node is allowed to become "Ready" after it is recreated before
	// the test is considered failed.
	RecreateNodeReadyAgainTimeout = 10 * time.Minute

	// RestartNodeReadyAgainTimeout is how long a node is allowed to become "Ready" after it is restarted before
	// the test is considered failed.
	RestartNodeReadyAgainTimeout = 5 * time.Minute

	// RestartPodReadyAgainTimeout is how long a pod is allowed to become "running" and "ready" after a node
	// restart before test is considered failed.
	RestartPodReadyAgainTimeout = 5 * time.Minute

	// SnapshotCreateTimeout is how long for snapshot to create snapshotContent.
	SnapshotCreateTimeout = 5 * time.Minute
)
View Source 
const CurrentKubeletPerfMetricsVersion = "v2"

CurrentKubeletPerfMetricsVersion is the current kubelet performance metrics version. This is used by mutiple perf related data structures. We should bump up the version each time we make an incompatible change to the metrics.

View Source 
const (
	// DefaultCPUProfileSeconds is default value for how long the CPU profile is gathered for.
	DefaultCPUProfileSeconds = 30
)
View Source 
const (

	// DefaultNamespaceDeletionTimeout is timeout duration for waiting for a namespace deletion.
	// TODO(mikedanese): reset this to 5 minutes once #47135 is resolved.
	// ref https://github.com/kubernetes/kubernetes/issues/47135
	DefaultNamespaceDeletionTimeout = 10 * time.Minute
)
View Source 
const (

	// DefaultNumNodes is the number of nodes. If not specified, then number of nodes is auto-detected
	DefaultNumNodes = -1
)
View Source 
const DefaultPodDeletionTimeout = 3 * time.Minute

DefaultPodDeletionTimeout is the default timeout for deleting pod

View Source 
const NoCPUConstraint = math.MaxFloat64

NoCPUConstraint is the number of constraint for CPU.

View Source 
const (
	// NodeStartupThreshold is a rough estimate of the time allocated for a pod to start on a node.
	NodeStartupThreshold = 4 * time.Second
)
View Source 
const (

	// VolumeSelectorKey is the key for volume selector.
	VolumeSelectorKey = "e2e-pv-pool"
)

Variables

View Source 
var (
	// BusyBoxImage is the image URI of BusyBox.
	BusyBoxImage = imageutils.GetE2EImage(imageutils.BusyBox)

	// ServeHostnameImage is a serve hostname image name.
	ServeHostnameImage = imageutils.GetE2EImage(imageutils.ServeHostname)
)
View Source 
var ImageWhiteList sets.String

ImageWhiteList is the images used in the current test suite. It should be initialized in test suite and the images in the white list should be pre-pulled in the test suite. Currently, this is only used by node e2e test.

View Source 
var ProvidersWithSSH = []string{"gce", "gke", "aws", "local"}

ProvidersWithSSH are those providers where each node is accessible with SSH

View Source 
var RunID = uuid.NewUUID()

RunID is a unique identifier of the e2e run. Beware that this ID is not the same for all tests in the e2e run, because each Ginkgo node creates it separately.

View Source 
var (
	// SELinuxLabel is common selinux labels.
	SELinuxLabel = &v1.SELinuxOptions{
		Level: "s0:c0,c1"}
)
View Source 
var ServiceNodePortRange = utilnet.PortRange{Base: 30000, Size: 2768}

ServiceNodePortRange should match whatever the default/configured range is

Functions

func APICallToPerfData added in v1.15.0 

func APICallToPerfData(apicalls *APIResponsiveness) *perftype.PerfData

APICallToPerfData transforms APIResponsiveness to PerfData.

func AddOrUpdateAvoidPodOnNode added in v1.7.0 

func AddOrUpdateAvoidPodOnNode(c clientset.Interface, nodeName string, avoidPods v1.AvoidPods)

AddOrUpdateAvoidPodOnNode adds avoidPods annotations to node, will override if it exists

func AddOrUpdateLabelOnNode added in v1.4.0 

func AddOrUpdateLabelOnNode(c clientset.Interface, nodeName string, labelKey, labelValue string)

AddOrUpdateLabelOnNode adds the given label key and value to the given node or updates value.

func AddOrUpdateLabelOnNodeAndReturnOldValue added in v1.8.0 

func AddOrUpdateLabelOnNodeAndReturnOldValue(c clientset.Interface, nodeName string, labelKey, labelValue string) string

AddOrUpdateLabelOnNodeAndReturnOldValue adds the given label key and value to the given node or updates value and returns the old label value.

func AddOrUpdateTaintOnNode added in v1.4.0 

func AddOrUpdateTaintOnNode(c clientset.Interface, nodeName string, taint v1.Taint)

AddOrUpdateTaintOnNode adds the given taint to the given node or updates taint.

func AfterReadingAllFlags added in v1.7.0 

func AfterReadingAllFlags(t *TestContextType)

AfterReadingAllFlags makes changes to the context after all flags have been read.

func AllNodesReady 

func AllNodesReady(c clientset.Interface, timeout time.Duration) error

AllNodesReady checks whether all registered nodes are ready. TODO: we should change the AllNodesReady call in AfterEach to WaitForAllNodesHealthy, and figure out how to do it in a configurable way, as we can't expect all setups to run default test add-ons.

func AssertCleanup 

func AssertCleanup(ns string, selectors ...string)

AssertCleanup asserts that cleanup of a namespace wrt selectors occurred.

func BlockNetwork 

func BlockNetwork(from string, to string)

BlockNetwork blocks network between the given from value and the given to value. The following helper functions can block/unblock network from source host to destination host by manipulating iptable rules. This function assumes it can ssh to the source host.

Caution: Recommend to input IP instead of hostnames. Using hostnames will cause iptables to do a DNS lookup to resolve the name to an IP address, which will slow down the test and cause it to fail if DNS is absent or broken.

Suggested usage pattern: 

func foo() {
	...
	defer UnblockNetwork(from, to)
	BlockNetwork(from, to)
	...
}

func CPUUsageToPerfData 

func CPUUsageToPerfData(usagePerNode NodesCPUSummary) *perftype.PerfData

CPUUsageToPerfData transforms NodesCPUSummary to PerfData.

func CPUUsageToPerfDataWithLabels added in v1.4.0 

func CPUUsageToPerfDataWithLabels(usagePerNode NodesCPUSummary, labels map[string]string) *perftype.PerfData

CPUUsageToPerfDataWithLabels transforms NodesCPUSummary to PerfData with additional labels.

func CheckAffinity added in v1.11.0 

func CheckAffinity(jig *ServiceTestJig, execPod *v1.Pod, targetIP string, targetPort int, shouldHold bool) bool

CheckAffinity function tests whether the service affinity works as expected. If affinity is expected, the test will return true once affinityConfirmCount number of same response observed in a row. If affinity is not expected, the test will keep observe until different responses observed. The function will return false only in case of unexpected errors.

func CheckConnectivityToHost 

func CheckConnectivityToHost(f *Framework, nodeName, podName, host string, pingCmd PingCommand, timeout int) error

CheckConnectivityToHost launches a pod to test connectivity to the specified host. An error will be returned if the host is not reachable from the pod.

An empty nodeName will use the schedule to choose where the pod is executed.

func CheckForControllerManagerHealthy added in v1.9.0 

func CheckForControllerManagerHealthy(duration time.Duration) error

CheckForControllerManagerHealthy checks that the controller manager does not crash within "duration"

func CheckInvariants 

func CheckInvariants(events []watch.Event, fns ...InvariantFunc) error

CheckInvariants checks for invariant of the each events.

func CheckNodesReady 

func CheckNodesReady(c clientset.Interface, size int, timeout time.Duration) ([]v1.Node, error)

CheckNodesReady waits up to timeout for cluster to has desired size and there is no not-ready nodes in it. By cluster size we mean number of Nodes excluding Master Node.

func CheckPodsCondition 

func CheckPodsCondition(c clientset.Interface, ns string, podNames []string, timeout time.Duration, condition podCondition, desc string) bool

CheckPodsCondition returns whether all pods whose names are listed in podNames in namespace ns are in the condition, using c and waiting at most timeout.

func CheckPodsRunningReady 

func CheckPodsRunningReady(c clientset.Interface, ns string, podNames []string, timeout time.Duration) bool

CheckPodsRunningReady returns whether all pods whose names are listed in podNames in namespace ns are running and ready, using c and waiting at most timeout.

func CheckPodsRunningReadyOrSucceeded 

func CheckPodsRunningReadyOrSucceeded(c clientset.Interface, ns string, podNames []string, timeout time.Duration) bool

CheckPodsRunningReadyOrSucceeded returns whether all pods whose names are listed in podNames in namespace ns are running and ready, or succeeded; use c and waiting at most timeout.

func CheckReachabilityFromPod added in v1.6.0 

func CheckReachabilityFromPod(expectToBeReachable bool, timeout time.Duration, namespace, pod, target string)

CheckReachabilityFromPod checks reachability from the specified pod.

func CheckTestingNSDeletedExcept 

func CheckTestingNSDeletedExcept(c clientset.Interface, skip string) error

CheckTestingNSDeletedExcept checks whether all e2e based existing namespaces are in the Terminating state and waits until they are finally deleted. It ignores namespace skip.

func Cleanup 

func Cleanup(filePath, ns string, selectors ...string)

Cleanup stops everything from filePath from namespace ns and checks if everything matching selectors from the given namespace is correctly stopped.

func CleanupServiceResources added in v1.7.0 

func CleanupServiceResources(c clientset.Interface, loadBalancerName, region, zone string)

CleanupServiceResources cleans up service Type=LoadBalancer resources.

func CollectAddresses added in v1.6.0 

func CollectAddresses(nodes *v1.NodeList, addressType v1.NodeAddressType) []string

CollectAddresses returns a list of addresses of the given addressType for the given list of nodes

func ConformanceIt added in v1.9.0 

func ConformanceIt(text string, body interface{}, timeout ...float64) bool

ConformanceIt is wrapper function for ginkgo It. Adds "[Conformance]" tag and makes static analysis easier.

func ContainerInitInvariant 

func ContainerInitInvariant(older, newer runtime.Object) error

ContainerInitInvariant checks for an init containers are initialized and invariant on both older and newer.

func CoreDump 

func CoreDump(dir string)

CoreDump SSHs to the master and all nodes and dumps their logs into dir. It shells out to cluster/log-dump/log-dump.sh to accomplish this.

func CreateClientPod added in v1.6.0 

func CreateClientPod(c clientset.Interface, ns string, pvc *v1.PersistentVolumeClaim) (*v1.Pod, error)

CreateClientPod defines and creates a pod with a mounted PV. Pod runs infinite loop until killed.

func CreateEmptyFileOnPod added in v1.7.0 

func CreateEmptyFileOnPod(namespace string, podName string, filePath string) error

CreateEmptyFileOnPod creates empty file at given path on the pod.

func CreateExecPodOrFail added in v1.6.0 

func CreateExecPodOrFail(client clientset.Interface, ns, generateName string, tweak func(*v1.Pod)) string

CreateExecPodOrFail creates a simple busybox pod in a sleep loop used as a vessel for kubectl exec commands. Returns the name of the created pod.

func CreateManagedInstanceGroup added in v1.10.0 

func CreateManagedInstanceGroup(size int64, zone, template string) error

CreateManagedInstanceGroup creates a Compute Engine managed instance group.

func CreateNginxPod added in v1.11.0 

func CreateNginxPod(client clientset.Interface, namespace string, nodeSelector map[string]string, pvclaims []*v1.PersistentVolumeClaim) (*v1.Pod, error)

CreateNginxPod creates an enginx pod.

func CreatePDWithRetry added in v1.6.0 

func CreatePDWithRetry() (string, error)

CreatePDWithRetry creates PD with retry.

func CreatePDWithRetryAndZone added in v1.7.0 

func CreatePDWithRetryAndZone(zone string) (string, error)

CreatePDWithRetryAndZone creates PD on zone with retry.

func CreatePV added in v1.10.0 

func CreatePV(c clientset.Interface, pv *v1.PersistentVolume) (*v1.PersistentVolume, error)

CreatePV creates the PV resource. Fails test on error.

func CreatePVC added in v1.6.0 

func CreatePVC(c clientset.Interface, ns string, pvc *v1.PersistentVolumeClaim) (*v1.PersistentVolumeClaim, error)

CreatePVC creates the PVC resource. Fails test on error.

func CreatePVCPV added in v1.6.0 

func CreatePVCPV(c clientset.Interface, pvConfig PersistentVolumeConfig, pvcConfig PersistentVolumeClaimConfig, ns string, preBind bool) (*v1.PersistentVolume, *v1.PersistentVolumeClaim, error)

CreatePVCPV creates a PVC followed by the PV based on the passed in nfs-server ip and namespace. If the "preBind" bool is true then pre-bind the PV to the PVC via the PV's ClaimRef. Return the pv and pvc to reflect the created objects. Note: in the pre-bind case the real PVC name, which is generated, is not 

known until after the PVC is instantiated. This is why the pvc is created
before the pv.

func CreatePVPVC added in v1.6.0 

func CreatePVPVC(c clientset.Interface, pvConfig PersistentVolumeConfig, pvcConfig PersistentVolumeClaimConfig, ns string, preBind bool) (*v1.PersistentVolume, *v1.PersistentVolumeClaim, error)

CreatePVPVC creates a PV followed by the PVC based on the passed in nfs-server ip and namespace. If the "preBind" bool is true then pre-bind the PVC to the PV via the PVC's VolumeName. Return the pv and pvc to reflect the created objects. Note: in the pre-bind case the real PV name, which is generated, is not 

known until after the PV is instantiated. This is why the pv is created
before the pvc.

func CreatePVSource added in v1.7.0 

func CreatePVSource(zone string) (*v1.PersistentVolumeSource, error)

CreatePVSource creates a PV source.

func CreatePVsPVCs added in v1.6.0 

func CreatePVsPVCs(numpvs, numpvcs int, c clientset.Interface, ns string, pvConfig PersistentVolumeConfig, pvcConfig PersistentVolumeClaimConfig) (PVMap, PVCMap, error)

CreatePVsPVCs creates the desired number of PVs and PVCs and returns them in separate maps. If the number of PVs != the number of PVCs then the min of those two counts is the number of PVs expected to bind. If a Create error occurs, the returned maps may contain pv and pvc entries for the resources that were successfully created. In other words, when the caller sees an error returned, it needs to decide what to do about entries in the maps. Note: when the test suite deletes the namespace orphaned pvcs and pods are deleted. However, 

orphaned pvs are not deleted and will remain after the suite completes.

func CreatePod added in v1.7.0 

func CreatePod(client clientset.Interface, namespace string, nodeSelector map[string]string, pvclaims []*v1.PersistentVolumeClaim, isPrivileged bool, command string) (*v1.Pod, error)

CreatePod with given claims based on node selector

func CreatePodOrFail added in v1.6.0 

func CreatePodOrFail(c clientset.Interface, ns, name string, labels map[string]string, containerPorts []v1.ContainerPort)

CreatePodOrFail creates a pod with the specified containerPorts.

func CreateSecPod added in v1.8.0 

func CreateSecPod(client clientset.Interface, namespace string, pvclaims []*v1.PersistentVolumeClaim, isPrivileged bool, command string, hostIPC bool, hostPID bool, seLinuxLabel *v1.SELinuxOptions, fsGroup *int64, timeout time.Duration) (*v1.Pod, error)

CreateSecPod creates security pod with given claims

func CreateSecPodWithNodeSelection added in v1.15.0 

func CreateSecPodWithNodeSelection(client clientset.Interface, namespace string, pvclaims []*v1.PersistentVolumeClaim, isPrivileged bool, command string, hostIPC bool, hostPID bool, seLinuxLabel *v1.SELinuxOptions, fsGroup *int64, node NodeSelection, timeout time.Duration) (*v1.Pod, error)

CreateSecPodWithNodeSelection creates security pod with given claims

func CreateServiceSpec added in v1.8.0 

func CreateServiceSpec(serviceName, externalName string, isHeadless bool, selector map[string]string) *v1.Service

CreateServiceSpec returns a Service object for testing.

func CreateStatefulSetService added in v1.6.0 

func CreateStatefulSetService(name string, labels map[string]string) *v1.Service

CreateStatefulSetService creates a Headless Service with Name name and Selector set to match labels.

func CreateTestingNS 

func CreateTestingNS(baseName string, c clientset.Interface, labels map[string]string) (*v1.Namespace, error)

CreateTestingNS should be used by every test, note that we append a common prefix to the provided test name. Please see NewFramework instead of using this directly.

func CreateUnschedulablePod added in v1.10.0 

func CreateUnschedulablePod(client clientset.Interface, namespace string, nodeSelector map[string]string, pvclaims []*v1.PersistentVolumeClaim, isPrivileged bool, command string) (*v1.Pod, error)

CreateUnschedulablePod with given claims based on node selector

func CreateWaitAndDeletePod added in v1.6.0 

func CreateWaitAndDeletePod(f *Framework, c clientset.Interface, ns string, pvc *v1.PersistentVolumeClaim) (err error)

CreateWaitAndDeletePod creates the test pod, wait for (hopefully) success, and then delete the pod. Note: need named return value so that the err assignment in the defer sets the returned error. 

Has been shown to be necessary using Go 1.7.

func DeleteAllStatefulSets added in v1.6.0 

func DeleteAllStatefulSets(c clientset.Interface, ns string)

DeleteAllStatefulSets deletes all StatefulSet API Objects in Namespace ns.

func DeleteManagedInstanceGroup added in v1.10.0 

func DeleteManagedInstanceGroup(zone string) error

DeleteManagedInstanceGroup deletes Google Compute Engine managed instance group.

func DeleteNamespaces 

func DeleteNamespaces(c clientset.Interface, deleteFilter, skipFilter []string) ([]string, error)

DeleteNamespaces deletes all namespaces that match the given delete and skip filters. Filter is by simple strings.Contains; first skip filter, then delete filter. Returns the list of deleted namespaces or an error.

func DeleteNodeOnCloudProvider added in v1.14.0 

func DeleteNodeOnCloudProvider(node *v1.Node) error

DeleteNodeOnCloudProvider deletes the specified node.

func DeletePDWithRetry added in v1.6.0 

func DeletePDWithRetry(diskName string) error

DeletePDWithRetry deletes PD with retry.

func DeletePVCandValidatePV added in v1.6.0 

func DeletePVCandValidatePV(c clientset.Interface, ns string, pvc *v1.PersistentVolumeClaim, pv *v1.PersistentVolume, expectPVPhase v1.PersistentVolumePhase) error

DeletePVCandValidatePV deletes the PVC and waits for the PV to enter its expected phase. Validate that the PV has been reclaimed (assumption here about reclaimPolicy). Caller tells this func which phase value to expect for the pv bound to the to-be-deleted claim.

func DeletePVCandValidatePVGroup added in v1.6.0 

func DeletePVCandValidatePVGroup(c clientset.Interface, ns string, pvols PVMap, claims PVCMap, expectPVPhase v1.PersistentVolumePhase) error

DeletePVCandValidatePVGroup wraps deletePVCandValidatePV() by calling the function in a loop over the PV map. Only bound PVs are deleted. Validates that the claim was deleted and the PV is in the expected Phase (Released, Available, Bound). Note: if there are more claims than pvs then some of the remaining claims may bind to just made 

available pvs.

func DeletePVSource added in v1.7.0 

func DeletePVSource(pvSource *v1.PersistentVolumeSource) error

DeletePVSource deletes a PV source.

func DeletePersistentVolume added in v1.6.0 

func DeletePersistentVolume(c clientset.Interface, pvName string) error

DeletePersistentVolume deletes the PV.

func DeletePersistentVolumeClaim added in v1.6.0 

func DeletePersistentVolumeClaim(c clientset.Interface, pvcName string, ns string) error

DeletePersistentVolumeClaim deletes the Claim.

func DeletePodOrFail added in v1.6.0 

func DeletePodOrFail(c clientset.Interface, ns, name string)

DeletePodOrFail deletes the pod of the specified namespace and name.

func DeletePodWithWait added in v1.6.0 

func DeletePodWithWait(f *Framework, c clientset.Interface, pod *v1.Pod) error

DeletePodWithWait deletes the passed-in pod and waits for the pod to be terminated. Resilient to the pod not existing.

func DeletePodWithWaitByName added in v1.10.8 

func DeletePodWithWaitByName(f *Framework, c clientset.Interface, podName, podNamespace string) error

DeletePodWithWaitByName deletes the named and namespaced pod and waits for the pod to be terminated. Resilient to the pod not existing.

func DeleteRCAndWaitForGC added in v1.4.0 

func DeleteRCAndWaitForGC(c clientset.Interface, ns, name string) error

DeleteRCAndWaitForGC deletes only the Replication Controller and waits for GC to delete the pods.

func DeleteResourceAndWaitForGC added in v1.6.0 

func DeleteResourceAndWaitForGC(c clientset.Interface, kind schema.GroupKind, ns, name string) error

DeleteResourceAndWaitForGC deletes only given resource and waits for GC to delete the pods.

func DescribeIng added in v1.6.0 

func DescribeIng(ns string)

DescribeIng describes information of ingress by running kubectl describe ing.

func DescribeItem added in v1.13.0 

func DescribeItem(item interface{}) string

DescribeItem always returns a string that describes the item, usually by calling out to cache.MetaNamespaceKeyFunc which concatenates namespace (if set) and name. If that fails, the entire item gets converted to a string.

func DescribeSvc added in v1.6.0 

func DescribeSvc(ns string)

DescribeSvc logs the output of kubectl describe svc for the given namespace

func DsFromManifest added in v1.8.1 

func DsFromManifest(url string) (*apps.DaemonSet, error)

DsFromManifest reads a .json/yaml file and returns the daemonset in it.

func DumpAllNamespaceInfo 

func DumpAllNamespaceInfo(c clientset.Interface, namespace string)

DumpAllNamespaceInfo dumps events, pods and nodes information in the given namespace.

func DumpDebugInfo added in v1.8.0 

func DumpDebugInfo(c clientset.Interface, ns string)

DumpDebugInfo dumps debug info of tests.

func DumpEventsInNamespace added in v1.5.0 

func DumpEventsInNamespace(eventsLister EventsLister, namespace string)

DumpEventsInNamespace dumps events in the given namespace.

func DumpNodeDebugInfo 

func DumpNodeDebugInfo(c clientset.Interface, nodeNames []string, logFunc func(fmt string, args ...interface{}))

DumpNodeDebugInfo dumps debug information of the given nodes.

func EnableAndDisableInternalLB added in v1.7.3 

func EnableAndDisableInternalLB() (enable func(svc *v1.Service), disable func(svc *v1.Service))

EnableAndDisableInternalLB returns two functions for enabling and disabling the internal load balancer setting for the supported cloud providers (currently GCE/GKE and Azure) and empty functions for others.

func EnsureLoadBalancerResourcesDeleted 

func EnsureLoadBalancerResourcesDeleted(ip, portRange string) error

EnsureLoadBalancerResourcesDeleted ensures that cloud load balancer resources that were created are actually cleaned up. Currently only implemented for GCE/GKE.

func EtcdUpgrade added in v1.5.4 

func EtcdUpgrade(targetStorage, targetVersion string) error

EtcdUpgrade upgrades etcd on GCE.

func ExpectError added in v1.15.0 

func ExpectError(err error, explain ...interface{})

ExpectError expects an error happens, otherwise an exception raises

func ExpectNoError 

func ExpectNoError(err error, explain ...interface{})

ExpectNoError checks if "err" is set, and if so, fails assertion while logging the error.

func ExpectNoErrorWithOffset added in v1.7.0 

func ExpectNoErrorWithOffset(offset int, err error, explain ...interface{})

ExpectNoErrorWithOffset checks if "err" is set, and if so, fails assertion while logging the error at "offset" levels above its caller (for example, for call chain f -> g -> ExpectNoErrorWithOffset(1, ...) error would be logged for "f").

func ExpectNoErrorWithRetries added in v1.4.0 

func ExpectNoErrorWithRetries(fn func() error, maxRetries int, explain ...interface{})

ExpectNoErrorWithRetries checks if an error occurs with the given retry count.

func ExpectNodeHasLabel added in v1.4.0 

func ExpectNodeHasLabel(c clientset.Interface, nodeName string, labelKey string, labelValue string)

ExpectNodeHasLabel expects that the given node has the given label pair.

func ExpectNodeHasTaint added in v1.4.0 

func ExpectNodeHasTaint(c clientset.Interface, nodeName string, taint *v1.Taint)

ExpectNodeHasTaint expects that the node has the given taint.

func Failf 

func Failf(format string, args ...interface{})

Failf logs the fail info.

func FailfWithOffset added in v1.7.0 

func FailfWithOffset(offset int, format string, args ...interface{})

FailfWithOffset calls "Fail" and logs the error at "offset" levels above its caller (for example, for call chain f -> g -> FailfWithOffset(1, ...) error would be logged for "f").

func FilterNodes 

func FilterNodes(nodeList *v1.NodeList, fn func(node v1.Node) bool)

FilterNodes filters nodes in NodeList in place, removing nodes that do not satisfy the given condition TODO: consider merging with pkg/client/cache.NodeLister

func FilterNonRestartablePods added in v1.15.0 

func FilterNonRestartablePods(pods []*v1.Pod) []*v1.Pod

FilterNonRestartablePods filters out pods that will never get recreated if deleted after termination.

func FormatRuntimeOperationErrorRate 

func FormatRuntimeOperationErrorRate(nodesResult map[string]NodeRuntimeOperationErrorRate) string

FormatRuntimeOperationErrorRate formats the runtime operation error rate to string.

func GatherCPUProfile added in v1.12.0 

func GatherCPUProfile(componentName string, profileBaseName string, wg *sync.WaitGroup)

GatherCPUProfile gathers CPU profile.

func GatherCPUProfileForSeconds added in v1.12.0 

func GatherCPUProfileForSeconds(componentName string, profileBaseName string, seconds int, wg *sync.WaitGroup)

GatherCPUProfileForSeconds gathers CPU profile for specified seconds.

func GatherMemoryProfile added in v1.12.0 

func GatherMemoryProfile(componentName string, profileBaseName string, wg *sync.WaitGroup)

GatherMemoryProfile gathers memory profile.

func GenerateMasterRegexp added in v1.5.0 

func GenerateMasterRegexp(prefix string) string

GenerateMasterRegexp returns a regex for matching master node name.

func GetAllMasterAddresses added in v1.13.0 

func GetAllMasterAddresses(c clientset.Interface) []string

GetAllMasterAddresses returns all IP addresses on which the kubelet can reach the master. It may return internal and external IPs, even if we expect for e.g. internal IPs to be used (issue #56787), so that we can be sure to block the master fully during tests.

func GetBoundPV added in v1.15.0 

func GetBoundPV(client clientset.Interface, pvc *v1.PersistentVolumeClaim) (*v1.PersistentVolume, error)

GetBoundPV returns a PV details.

func GetClusterZones added in v1.7.16 

func GetClusterZones(c clientset.Interface) (sets.String, error)

GetClusterZones returns the values of zone label collected from all nodes.

func GetDefaultStorageClassName added in v1.15.0 

func GetDefaultStorageClassName(c clientset.Interface) (string, error)

GetDefaultStorageClassName returns default storageClass or return error

func GetFileModeRegex added in v1.14.0 

func GetFileModeRegex(filePath string, mask *int32) string

GetFileModeRegex returns a file mode related regex which should be matched by the mounttest pods' output. If the given mask is nil, then the regex will contain the default OS file modes, which are 0644 for Linux and 0775 for Windows.

func GetGroupNodes added in v1.7.0 

func GetGroupNodes(group string) ([]string, error)

GetGroupNodes returns a node name for the specified node group

func GetHostExternalAddress 

func GetHostExternalAddress(client clientset.Interface, p *v1.Pod) (externalAddress string, err error)

GetHostExternalAddress gets the node for a pod and returns the first External address. Returns an error if the node the pod is on doesn't have an External address.

func GetIngressPoint added in v1.6.0 

func GetIngressPoint(ing *v1.LoadBalancerIngress) string

GetIngressPoint returns a host on which ingress serves.

func GetKubeletHeapStats 

func GetKubeletHeapStats(c clientset.Interface, nodeName string) (string, error)

GetKubeletHeapStats returns stats of kubelet heap.

func GetKubeletPods 

func GetKubeletPods(c clientset.Interface, node string) (*v1.PodList, error)

GetKubeletPods retrieves the list of pods on the kubelet

func GetKubeletRunningPods 

func GetKubeletRunningPods(c clientset.Interface, node string) (*v1.PodList, error)

GetKubeletRunningPods retrieves the list of running pods on the kubelet. The pods includes necessary information (e.g., UID, name, namespace for pods/containers), but do not contain the full spec.

func GetKubemarkMasterComponentsResourceUsage added in v1.6.0 

func GetKubemarkMasterComponentsResourceUsage() map[string]*KubemarkResourceUsage

GetKubemarkMasterComponentsResourceUsage returns the resource usage of kubemark which contains multiple combinations of cpu and memory usage for each pod name. TODO: figure out how to move this to kubemark directory (need to factor test SSH out of e2e framework)

func GetLogToFileFunc added in v1.7.0 

func GetLogToFileFunc(file *os.File) func(format string, args ...interface{})

GetLogToFileFunc is a convenience function that returns a function that have the same interface as e2elog.Logf, but writes to a specified file.

func GetManagedInstanceGroupTemplateName added in v1.11.0 

func GetManagedInstanceGroupTemplateName(zone string) (string, error)

GetManagedInstanceGroupTemplateName returns the list of Google Compute Engine managed instance groups.

func GetMasterAndWorkerNodesOrDie added in v1.4.0 

func GetMasterAndWorkerNodesOrDie(c clientset.Interface) (sets.String, *v1.NodeList)

GetMasterAndWorkerNodesOrDie will return a list masters and schedulable worker nodes

func GetMasterHost 

func GetMasterHost() string

GetMasterHost returns a hostname of a master.

func GetNodeAddresses added in v1.6.0 

func GetNodeAddresses(node *v1.Node, addressType v1.NodeAddressType) (ips []string)

GetNodeAddresses returns a list of addresses of the given addressType for the given node

func GetNodeExternalIP added in v1.5.0 

func GetNodeExternalIP(node *v1.Node) (string, error)

GetNodeExternalIP returns node external IP concatenated with port 22 for ssh e.g. 1.2.3.4:22

func GetNodeInternalIP added in v1.12.0 

func GetNodeInternalIP(node *v1.Node) (string, error)

GetNodeInternalIP returns node internal IP

func GetNodePortURL 

func GetNodePortURL(client clientset.Interface, ns, name string, svcPort int) (string, error)

GetNodePortURL returns the url to a nodeport Service.

func GetNodePublicIps added in v1.6.0 

func GetNodePublicIps(c clientset.Interface) ([]string, error)

GetNodePublicIps returns a public IP list of nodes.

func GetPodLogs 

func GetPodLogs(c clientset.Interface, namespace, podName, containerName string) (string, error)

GetPodLogs returns the logs of the specified container (namespace/pod/container). TODO(random-liu): Change this to be a member function of the framework.

func GetPodSecretUpdateTimeout added in v1.8.0 

func GetPodSecretUpdateTimeout(c clientset.Interface) time.Duration

GetPodSecretUpdateTimeout reuturns the timeout duration for updating pod secret.

func GetPodsInNamespace 

func GetPodsInNamespace(c clientset.Interface, ns string, ignoreLabels map[string]string) ([]*v1.Pod, error)

GetPodsInNamespace returns the pods in the given namespace.

func GetPodsScheduled added in v1.4.0 

func GetPodsScheduled(masterNodes sets.String, pods *v1.PodList) (scheduledPods, notScheduledPods []v1.Pod)

GetPodsScheduled returns a number of currently scheduled and not scheduled Pods.

func GetProviders added in v1.14.0 

func GetProviders() []string

GetProviders returns the names of all currently registered providers.

func GetReadyNodesIncludingTaintedOrDie added in v1.11.0 

func GetReadyNodesIncludingTaintedOrDie(c clientset.Interface) (nodes *v1.NodeList)

GetReadyNodesIncludingTaintedOrDie returns all ready nodes, even those which are tainted. There are cases when we care about tainted nodes E.g. in tests related to nodes with gpu we care about nodes despite presence of nvidia.com/gpu=present:NoSchedule taint

func GetReadySchedulableNodesOrDie 

func GetReadySchedulableNodesOrDie(c clientset.Interface) (nodes *v1.NodeList)

GetReadySchedulableNodesOrDie addresses the common use case of getting nodes you can do work on. 1) Needs to be schedulable. 2) Needs to be ready. If EITHER 1 or 2 is not true, most tests will want to ignore the node entirely.

func GetServiceLoadBalancerCreationTimeout added in v1.8.0 

func GetServiceLoadBalancerCreationTimeout(cs clientset.Interface) time.Duration

GetServiceLoadBalancerCreationTimeout returns a timeout value for creating a load balancer of a service.

func GetServicesProxyRequest 

func GetServicesProxyRequest(c clientset.Interface, request *restclient.Request) (*restclient.Request, error)

GetServicesProxyRequest returns a request for a service proxy.

func GetStatsSummary added in v1.11.10 

func GetStatsSummary(c clientset.Interface, nodeName string) (*stats.Summary, error)

GetStatsSummary contacts kubelet for the container information.

func GroupSize added in v1.7.0 

func GroupSize(group string) (int, error)

GroupSize returns the size of an instance group

func HandleFlags added in v1.13.0 

func HandleFlags()

HandleFlags sets up all flags and parses the command line.

func IsNodeConditionSetAsExpected 

func IsNodeConditionSetAsExpected(node *v1.Node, conditionType v1.NodeConditionType, wantTrue bool) bool

IsNodeConditionSetAsExpected returns a wantTrue value if the node has a match to the conditionType, otherwise returns an opposite value of the wantTrue with detailed logging.

func IsNodeConditionSetAsExpectedSilent 

func IsNodeConditionSetAsExpectedSilent(node *v1.Node, conditionType v1.NodeConditionType, wantTrue bool) bool

IsNodeConditionSetAsExpectedSilent returns a wantTrue value if the node has a match to the conditionType, otherwise returns an opposite value of the wantTrue.

func IsNodeConditionUnset 

func IsNodeConditionUnset(node *v1.Node, conditionType v1.NodeConditionType) bool

IsNodeConditionUnset returns true if conditions of the given node do not have a match to the given conditionType, otherwise false.

func IsPodSecurityPolicyEnabled added in v1.8.3 

func IsPodSecurityPolicyEnabled(f *Framework) bool

IsPodSecurityPolicyEnabled returns true if PodSecurityPolicy is enabled. Otherwise false.

func KubeDescribe 

func KubeDescribe(text string, body func()) bool

KubeDescribe is wrapper function for ginkgo describe. Adds namespacing. TODO: Support type safe tagging as well https://github.com/kubernetes/kubernetes/pull/22401.

func KubectlCmd 

func KubectlCmd(args ...string) *exec.Cmd

KubectlCmd runs the kubectl executable through the wrapper script.

func KubectlVersion 

func KubectlVersion() (*utilversion.Version, error)

KubectlVersion gets the version of kubectl that's currently being used (see --kubectl-path in e2e.go to use an alternate kubectl).

func LaunchHostExecPod 

func LaunchHostExecPod(client clientset.Interface, ns, name string) *v1.Pod

LaunchHostExecPod launches a hostexec pod in the given namespace and waits until it's Running

func ListNamespaceEvents added in v1.4.0 

func ListNamespaceEvents(c clientset.Interface, ns string) error

ListNamespaceEvents lists the events in the given namespace.

func LoadClientset added in v1.5.0 

func LoadClientset() (*clientset.Clientset, error)

LoadClientset returns clientset for connecting to kubernetes clusters.

func LoadConfig 

func LoadConfig() (*restclient.Config, error)

LoadConfig returns a config for a rest client.

func LogClusterImageSources added in v1.5.8 

func LogClusterImageSources()

LogClusterImageSources writes out cluster image sources.

func LogFailedContainers 

func LogFailedContainers(c clientset.Interface, ns string, logFunc func(ftm string, args ...interface{}))

LogFailedContainers runs `kubectl logs` on a failed containers.

func LogSuspiciousLatency 

func LogSuspiciousLatency(latencyData []PodLatencyData, latencyDataLag []PodLatencyData, nodeCount int, c clientset.Interface)

LogSuspiciousLatency logs metrics/docker errors from all nodes that had slow startup times If latencyDataLag is nil then it will be populated from latencyData

func LookForString 

func LookForString(expectedString string, timeout time.Duration, fn func() string) (result string, err error)

LookForString looks for the given string in the output of fn, repeatedly calling fn until the timeout is reached or the string is found. Returns last log and possibly error if the string was not found.

func LookForStringInFile 

func LookForStringInFile(ns, podName, container, file, expectedString string, timeout time.Duration) (result string, err error)

LookForStringInFile looks for the given string in a file in a specific pod container

func LookForStringInLog 

func LookForStringInLog(ns, podName, container, expectedString string, timeout time.Duration) (result string, err error)

LookForStringInLog looks for the given string in the log of a specific pod container

func LookForStringInPodExec 

func LookForStringInPodExec(ns, podName string, command []string, expectedString string, timeout time.Duration) (result string, err error)

LookForStringInPodExec looks for the given string in the output of a command executed in a specific pod container

func MakePersistentVolume added in v1.7.0 

func MakePersistentVolume(pvConfig PersistentVolumeConfig) *v1.PersistentVolume

MakePersistentVolume returns a PV definition based on the nfs server IP. If the PVC is not nil then the PV is defined with a ClaimRef which includes the PVC's namespace. If the PVC is nil then the PV is not defined with a ClaimRef. If no reclaimPolicy is assigned, assumes "Retain". Specs are expected to match the test's PVC. Note: the passed-in claim does not have a name until it is created and thus the PV's 

ClaimRef cannot be completely filled-in in this func. Therefore, the ClaimRef's name
is added later in CreatePVCPV.

func MakePersistentVolumeClaim added in v1.6.0 

func MakePersistentVolumeClaim(cfg PersistentVolumeClaimConfig, ns string) *v1.PersistentVolumeClaim

MakePersistentVolumeClaim returns a PVC definition based on the namespace. Note: if this PVC is intended to be pre-bound to a PV, whose name is not 

known until the PV is instantiated, then the func CreatePVPVC will add
pvc.Spec.VolumeName to this claim.

func MakePod added in v1.6.0 

func MakePod(ns string, nodeSelector map[string]string, pvclaims []*v1.PersistentVolumeClaim, isPrivileged bool, command string) *v1.Pod

MakePod returns a pod definition based on the namespace. The pod references the PVC's name. A slice of BASH commands can be supplied as args to be run by the pod

func MakeSecPod added in v1.8.0 

func MakeSecPod(ns string, pvclaims []*v1.PersistentVolumeClaim, isPrivileged bool, command string, hostIPC bool, hostPID bool, seLinuxLabel *v1.SELinuxOptions, fsGroup *int64) *v1.Pod

MakeSecPod returns a pod definition based on the namespace. The pod references the PVC's name. A slice of BASH commands can be supplied as args to be run by the pod. SELinux testing requires to pass HostIPC and HostPID as booleansi arguments.

func MakeWritePod added in v1.6.0 

func MakeWritePod(ns string, pvc *v1.PersistentVolumeClaim) *v1.Pod

MakeWritePod returns a pod definition based on the namespace. The pod references the PVC's name.

func MasterOSDistroIs added in v1.8.0 

func MasterOSDistroIs(supportedMasterOsDistros ...string) bool

MasterOSDistroIs returns true if the master OS distro is included in the supportedMasterOsDistros. Otherwise false.

func MasterUpgrade 

func MasterUpgrade(v string) error

MasterUpgrade upgrades master node on GCE/GKE.

func MasterUpgradeGCEWithKubeProxyDaemonSet added in v1.8.0 

func MasterUpgradeGCEWithKubeProxyDaemonSet(v string, enableKubeProxyDaemonSet bool) error

MasterUpgradeGCEWithKubeProxyDaemonSet upgrades master node on GCE with enabling/disabling the daemon set of kube-proxy. TODO(mrhohn): Remove this function when kube-proxy is run as a DaemonSet by default.

func MigTemplate 

func MigTemplate() (string, error)

MigTemplate (GCE-only) returns the name of the MIG template that the nodes of the cluster use.

func NewE2ETestNodePreparer added in v1.5.0 

func NewE2ETestNodePreparer(client clientset.Interface, countToStrategy []testutils.CountToStrategy) testutils.TestNodePreparer

NewE2ETestNodePreparer returns a new instance of E2ETestNodePreparer.

func NewExecPodSpec added in v1.14.0 

func NewExecPodSpec(ns, name string, hostNetwork bool) *v1.Pod

NewExecPodSpec returns the pod spec of hostexec pod

func NewStatefulSet added in v1.6.0 

func NewStatefulSet(name, ns, governingSvcName string, replicas int32, statefulPodMounts []v1.VolumeMount, podMounts []v1.VolumeMount, labels map[string]string) *apps.StatefulSet

NewStatefulSet creates a new NGINX StatefulSet for testing. The StatefulSet is named name, is in namespace ns, statefulPodsMounts are the mounts that will be backed by PVs. podsMounts are the mounts that are mounted directly to the Pod. labels are the labels that will be usd for the StatefulSet selector.

func NewStatefulSetPVC added in v1.6.0 

func NewStatefulSetPVC(name string) v1.PersistentVolumeClaim

NewStatefulSetPVC returns a PersistentVolumeClaim named name, for testing StatefulSets.

func NewStatefulSetScale added in v1.8.0 

func NewStatefulSetScale(ss *apps.StatefulSet) *appsV1beta2.Scale

NewStatefulSetScale creates a new StatefulSet scale subresource and returns it

func NodeAddresses 

func NodeAddresses(nodelist *v1.NodeList, addrType v1.NodeAddressType) []string

NodeAddresses returns the first address of the given type of each node.

func NodeHasTaint added in v1.6.0 

func NodeHasTaint(c clientset.Interface, nodeName string, taint *v1.Taint) (bool, error)

NodeHasTaint returns true if the node has the given taint, else returns false.

func NodeOSDistroIs added in v1.6.0 

func NodeOSDistroIs(supportedNodeOsDistros ...string) bool

NodeOSDistroIs returns true if the node OS distro is included in the supportedNodeOsDistros. Otherwise false.

func NodeProxyRequest 

func NodeProxyRequest(c clientset.Interface, node, endpoint string, port int) (restclient.Result, error)

NodeProxyRequest performs a get on a node proxy endpoint given the nodename and rest client.

func NodeUpgrade 

func NodeUpgrade(f *Framework, v string, img string) error

NodeUpgrade upgrades nodes on GCE/GKE.

func NodeUpgradeGCEWithKubeProxyDaemonSet added in v1.8.0 

func NodeUpgradeGCEWithKubeProxyDaemonSet(f *Framework, v string, img string, enableKubeProxyDaemonSet bool) error

NodeUpgradeGCEWithKubeProxyDaemonSet upgrades nodes on GCE with enabling/disabling the daemon set of kube-proxy. TODO(mrhohn): Remove this function when kube-proxy is run as a DaemonSet by default.

func NumberOfReadyNodes added in v1.8.0 

func NumberOfReadyNodes(c clientset.Interface) (int, error)

NumberOfReadyNodes returns number of ready Nodes excluding Master Node.

func NumberOfRegisteredNodes added in v1.8.12 

func NumberOfRegisteredNodes(c clientset.Interface) (int, error)

NumberOfRegisteredNodes returns number of registered Nodes excluding Master Node.

func OpenWebSocketForURL 

func OpenWebSocketForURL(url *url.URL, config *restclient.Config, protocols []string) (*websocket.Conn, error)

OpenWebSocketForURL constructs a websocket connection to the provided URL, using the client config, with the specified protocols.

func PVPVCCleanup added in v1.6.0 

func PVPVCCleanup(c clientset.Interface, ns string, pv *v1.PersistentVolume, pvc *v1.PersistentVolumeClaim) []error

PVPVCCleanup cleans up a pv and pvc in a single pv/pvc test case. Note: delete errors are appended to []error so that we can attempt to delete both the pvc and pv.

func PVPVCMapCleanup added in v1.6.0 

func PVPVCMapCleanup(c clientset.Interface, ns string, pvols PVMap, claims PVCMap) []error

PVPVCMapCleanup Cleans up pvs and pvcs in multi-pv-pvc test cases. Entries found in the pv and claim maps are deleted as long as the Delete api call succeeds. Note: delete errors are appended to []error so that as many pvcs and pvs as possible are deleted.

func ParseKVLines 

func ParseKVLines(output, key string) string

ParseKVLines parses output that looks like lines containing "<key>: <val>" and returns <val> if <key> is found. Otherwise, it returns the empty string.

func PickNodeIP added in v1.6.0 

func PickNodeIP(c clientset.Interface) string

PickNodeIP picks one public node IP

func PodStartupLatencyToPerfData added in v1.7.0 

func PodStartupLatencyToPerfData(latency *PodStartupLatency) *perftype.PerfData

PodStartupLatencyToPerfData transforms PodStartupLatency to PerfData.

func PodsCreated 

func PodsCreated(c clientset.Interface, ns, name string, replicas int32) (*v1.PodList, error)

PodsCreated returns a pod list matched by the given name.

func PodsCreatedByLabel added in v1.5.0 

func PodsCreatedByLabel(c clientset.Interface, ns, name string, replicas int32, label labels.Selector) (*v1.PodList, error)

PodsCreatedByLabel returns a created pod list matched by the given label.

func PodsResponding 

func PodsResponding(c clientset.Interface, ns, name string, wantName bool, pods *v1.PodList) error

PodsResponding waits for the pods to response.

func PollURL added in v1.6.0 

func PollURL(route, host string, timeout time.Duration, interval time.Duration, httpClient *http.Client, expectUnreachable bool) error

PollURL polls till the url responds with a healthy http code. If expectUnreachable is true, it breaks on first non-healthy http code instead.

func PrettyPrint added in v1.13.0 

func PrettyPrint(item interface{}) string

PrettyPrint returns a human-readable representation of an item.

func PrettyPrintJSON 

func PrettyPrintJSON(metrics interface{}) string

PrettyPrintJSON converts metrics to JSON format.

func PrintAllKubeletPods 

func PrintAllKubeletPods(c clientset.Interface, nodeName string)

PrintAllKubeletPods outputs status of all kubelet pods into log.

func PrintLatencies 

func PrintLatencies(latencies []PodLatencyData, header string)

PrintLatencies outputs latencies to log with readable format.

func PrintPerfData 

func PrintPerfData(p *perftype.PerfData)

PrintPerfData prints the perfdata in json format with PerfResultTag prefix. If an error occurs, nothing will be printed.

func PrintSummaries added in v1.7.0 

func PrintSummaries(summaries []TestDataSummary, testBaseName string)

PrintSummaries prints summaries of tests.

func ProviderIs 

func ProviderIs(providers ...string) bool

ProviderIs returns true if the provider is included is the providers. Otherwise false.

func ProxyMode added in v1.7.0 

func ProxyMode(f *Framework) (string, error)

ProxyMode returns a proxyMode of a kube-proxy.

func RandomSuffix added in v1.14.0 

func RandomSuffix() string

RandomSuffix provides a random string to append to pods,services,rcs. TODO: Allow service names to have the same form as names 

for pods and replication controllers so we don't
need to use such a function and can instead
use the UUID utility function.

func RcByNameContainer added in v1.6.0 

func RcByNameContainer(name string, replicas int32, image string, labels map[string]string, c v1.Container,
	gracePeriod *int64) *v1.ReplicationController

RcByNameContainer returns a ReplicationController with specified name and container

func RcByNamePort added in v1.6.0 

func RcByNamePort(name string, replicas int32, image string, port int, protocol v1.Protocol,
	labels map[string]string, gracePeriod *int64) *v1.ReplicationController

RcByNamePort returns a ReplicationController with specified name and port

func RegisterClusterFlags added in v1.4.0 

func RegisterClusterFlags()

RegisterClusterFlags registers flags specific to the cluster e2e test suite.

func RegisterCommonFlags added in v1.4.0 

func RegisterCommonFlags()

RegisterCommonFlags registers flags common to all e2e test suites.

func RegisterNodeFlags added in v1.4.0 

func RegisterNodeFlags()

RegisterNodeFlags registers flags specific to the node e2e test suite.

func RegisterProvider added in v1.13.0 

func RegisterProvider(name string, factory Factory)

RegisterProvider is expected to be called during application init, typically by an init function in a provider package.

func RemoveAvoidPodsOffNode added in v1.7.0 

func RemoveAvoidPodsOffNode(c clientset.Interface, nodeName string)

RemoveAvoidPodsOffNode removes AvoidPods annotations from the node. It does not fail if no such annotation exists.

func RemoveCleanupAction 

func RemoveCleanupAction(p CleanupActionHandle)

RemoveCleanupAction removes a function that was installed by AddCleanupAction.

func RemoveLabelOffNode added in v1.4.0 

func RemoveLabelOffNode(c clientset.Interface, nodeName string, labelKey string)

RemoveLabelOffNode is for cleaning up labels temporarily added to node, won't fail if target label doesn't exist or has been removed.

func RemoveTaintOffNode added in v1.4.0 

func RemoveTaintOffNode(c clientset.Interface, nodeName string, taint v1.Taint)

RemoveTaintOffNode removes the given taint from the given node.

func ResetMetrics 

func ResetMetrics(c clientset.Interface) error

ResetMetrics resets latency metrics in apiserver.

func ResetSchedulerMetrics added in v1.11.0 

func ResetSchedulerMetrics(c clientset.Interface) error

ResetSchedulerMetrics sends a DELETE request to kube-scheduler for resetting metrics.

func ResizeGroup added in v1.7.0 

func ResizeGroup(group string, size int32) error

ResizeGroup resizes an instance group

func ResourceUsageToPerfData 

func ResourceUsageToPerfData(usagePerNode ResourceUsagePerNode) *perftype.PerfData

ResourceUsageToPerfData transforms ResourceUsagePerNode to PerfData. Notice that this function only cares about memory usage, because cpu usage information will be extracted from NodesCPUSummary.

func ResourceUsageToPerfDataWithLabels added in v1.4.0 

func ResourceUsageToPerfDataWithLabels(usagePerNode ResourceUsagePerNode, labels map[string]string) *perftype.PerfData

ResourceUsageToPerfDataWithLabels transforms ResourceUsagePerNode to PerfData with additional labels. Notice that this function only cares about memory usage, because cpu usage information will be extracted from NodesCPUSummary.

func RestartApiserver 

func RestartApiserver(cs clientset.Interface) error

RestartApiserver restarts the kube-apiserver.

func RestartControllerManager added in v1.8.0 

func RestartControllerManager() error

RestartControllerManager restarts the kube-controller-manager.

func RestartKubeProxy 

func RestartKubeProxy(host string) error

RestartKubeProxy restarts kube-proxy on the given host.

func RestartKubelet added in v1.8.0 

func RestartKubelet(host string) error

RestartKubelet restarts kubelet on the given host.

func RestclientConfig added in v1.6.0 

func RestclientConfig(kubeContext string) (*clientcmdapi.Config, error)

RestclientConfig returns a config holds the information needed to build connection to kubernetes clusters.

func RunCleanupActions 

func RunCleanupActions()

RunCleanupActions runs all functions installed by AddCleanupAction. It does not remove them (see RemoveCleanupAction) but it does run unlocked, so they may remove themselves.

func RunCmd 

func RunCmd(command string, args ...string) (string, string, error)

RunCmd runs cmd using args and returns its stdout and stderr. It also outputs cmd's stdout and stderr to their respective OS streams.

func RunCmdEnv added in v1.5.4 

func RunCmdEnv(env []string, command string, args ...string) (string, string, error)

RunCmdEnv runs cmd with the provided environment and args and returns its stdout and stderr. It also outputs cmd's stdout and stderr to their respective OS streams.

func RunHostCmd 

func RunHostCmd(ns, name, cmd string) (string, error)

RunHostCmd runs the given cmd in the context of the given pod using `kubectl exec` inside of a shell.

func RunHostCmdOrDie 

func RunHostCmdOrDie(ns, name, cmd string) string

RunHostCmdOrDie calls RunHostCmd and dies on error.

func RunHostCmdWithRetries added in v1.7.6 

func RunHostCmdWithRetries(ns, name, cmd string, interval, timeout time.Duration) (string, error)

RunHostCmdWithRetries calls RunHostCmd and retries all errors until it succeeds or the specified timeout expires. This can be used with idempotent commands to deflake transient Node issues.

func RunIfContainerRuntimeIs added in v1.6.8 

func RunIfContainerRuntimeIs(runtimes ...string)

RunIfContainerRuntimeIs runs if the container runtime is included in the runtimes.

func RunIfSystemSpecNameIs added in v1.6.8 

func RunIfSystemSpecNameIs(names ...string)

RunIfSystemSpecNameIs runs if the system spec name is included in the names.

func RunKubectl 

func RunKubectl(args ...string) (string, error)

RunKubectl is a convenience wrapper over kubectlBuilder

func RunKubectlInput added in v1.14.0 

func RunKubectlInput(data string, args ...string) (string, error)

RunKubectlInput is a convenience wrapper over kubectlBuilder that takes input to stdin

func RunKubectlOrDie 

func RunKubectlOrDie(args ...string) string

RunKubectlOrDie is a convenience wrapper over kubectlBuilder

func RunKubectlOrDieInput 

func RunKubectlOrDieInput(data string, args ...string) string

RunKubectlOrDieInput is a convenience wrapper over kubectlBuilder that takes input to stdin

func RunKubemciCmd added in v1.11.0 

func RunKubemciCmd(args ...string) (string, error)

RunKubemciCmd is a convenience wrapper over kubectlBuilder to run kubemci. It assumes that kubemci exists in PATH.

func RunKubemciWithKubeconfig added in v1.11.0 

func RunKubemciWithKubeconfig(args ...string) (string, error)

RunKubemciWithKubeconfig is a convenience wrapper over RunKubemciCmd

func RunRC 

func RunRC(config testutils.RCConfig) error

RunRC Launches (and verifies correctness) of a Replication Controller and will wait for all pods it spawns to become "Running".

func ScaleRC 

func ScaleRC(clientset clientset.Interface, scalesGetter scaleclient.ScalesGetter, ns, name string, size uint, wait bool) error

ScaleRC scales Replication Controller to be desired size.

func ScaleResource added in v1.6.0 

func ScaleResource(
	clientset clientset.Interface,
	scalesGetter scaleclient.ScalesGetter,
	ns, name string,
	size uint,
	wait bool,
	kind schema.GroupKind,
	gr schema.GroupResource,
) error

ScaleResource scales resource to the given size.

func ServerVersionGTE 

func ServerVersionGTE(v *utilversion.Version, c discovery.ServerVersionInterface) (bool, error)

ServerVersionGTE returns true if v is greater than or equal to the server version.

TODO(18726): This should be incorporated into client.VersionInterface.

func ServiceResponding 

func ServiceResponding(c clientset.Interface, ns, name string) error

ServiceResponding waits for the service to be responding.

func SetAffinity added in v1.15.0 

func SetAffinity(nodeSelection *NodeSelection, nodeName string)

SetAffinity sets affinity to nodeName to nodeSelection

func SetAntiAffinity added in v1.15.0 

func SetAntiAffinity(nodeSelection *NodeSelection, nodeName string)

SetAntiAffinity sets anti-affinity to nodeName to nodeSelection

func SetNodeAffinityRequirement added in v1.15.0 

func SetNodeAffinityRequirement(nodeSelection *NodeSelection, operator v1.NodeSelectorOperator, nodeName string)

SetNodeAffinityRequirement sets affinity with specified operator to nodeName to nodeSelection

func SimpleGET added in v1.6.0 

func SimpleGET(c *http.Client, url, host string) (string, error)

SimpleGET executes a get on the given url, returns error if non-200 returned.

func SkipIfContainerRuntimeIs added in v1.4.0 

func SkipIfContainerRuntimeIs(runtimes ...string)

SkipIfContainerRuntimeIs skips if the container runtime is included in the runtimes.

func SkipIfMissingResource added in v1.4.1 

func SkipIfMissingResource(dynamicClient dynamic.Interface, gvr schema.GroupVersionResource, namespace string)

SkipIfMissingResource skips if the gvr resource is missing.

func SkipIfMultizone added in v1.7.16 

func SkipIfMultizone(c clientset.Interface)

SkipIfMultizone skips if the cluster has multizone.

func SkipIfNoDefaultStorageClass added in v1.15.0 

func SkipIfNoDefaultStorageClass(c clientset.Interface)

SkipIfNoDefaultStorageClass skips tests if no default SC can be found.

func SkipIfProviderIs 

func SkipIfProviderIs(unsupportedProviders ...string)

SkipIfProviderIs skips if the provider is included in the unsupportedProviders.

func SkipUnlessAtLeast 

func SkipUnlessAtLeast(value int, minValue int, message string)

SkipUnlessAtLeast skips if the value is less than the minValue.

func SkipUnlessLocalEphemeralStorageEnabled added in v1.9.0 

func SkipUnlessLocalEphemeralStorageEnabled()

SkipUnlessLocalEphemeralStorageEnabled skips if the LocalStorageCapacityIsolation is not enabled.

func SkipUnlessMasterOSDistroIs added in v1.8.0 

func SkipUnlessMasterOSDistroIs(supportedMasterOsDistros ...string)

SkipUnlessMasterOSDistroIs skips if the master OS distro is not included in the supportedMasterOsDistros.

func SkipUnlessMultizone added in v1.10.0 

func SkipUnlessMultizone(c clientset.Interface)

SkipUnlessMultizone skips if the cluster does not have multizone.

func SkipUnlessNodeCountIsAtLeast 

func SkipUnlessNodeCountIsAtLeast(minNodeCount int)

SkipUnlessNodeCountIsAtLeast skips if the number of nodes is less than the minNodeCount.

func SkipUnlessNodeCountIsAtMost added in v1.6.0 

func SkipUnlessNodeCountIsAtMost(maxNodeCount int)

SkipUnlessNodeCountIsAtMost skips if the number of nodes is greater than the maxNodeCount.

func SkipUnlessNodeOSDistroIs added in v1.6.0 

func SkipUnlessNodeOSDistroIs(supportedNodeOsDistros ...string)

SkipUnlessNodeOSDistroIs skips if the node OS distro is not included in the supportedNodeOsDistros.

func SkipUnlessPrometheusMonitoringIsEnabled added in v1.11.0 

func SkipUnlessPrometheusMonitoringIsEnabled(supportedMonitoring ...string)

SkipUnlessPrometheusMonitoringIsEnabled skips if the prometheus monitoring is not enabled.

func SkipUnlessProviderIs 

func SkipUnlessProviderIs(supportedProviders ...string)

SkipUnlessProviderIs skips if the provider is not included in the supportedProviders.

func SkipUnlessSSHKeyPresent added in v1.6.4 

func SkipUnlessSSHKeyPresent()

SkipUnlessSSHKeyPresent skips if no SSH key is found.

func SkipUnlessServerVersionGTE 

func SkipUnlessServerVersionGTE(v *utilversion.Version, c discovery.ServerVersionInterface)

SkipUnlessServerVersionGTE skips if the server version is less than v.

func SkipUnlessTaintBasedEvictionsEnabled added in v1.13.0 

func SkipUnlessTaintBasedEvictionsEnabled()

SkipUnlessTaintBasedEvictionsEnabled skips if the TaintBasedEvictions is not enabled.

func Skipf 

func Skipf(format string, args ...interface{})

Skipf skips with information about why the test is being skipped.

func StartCPUProfileGatherer added in v1.12.0 

func StartCPUProfileGatherer(componentName string, profileBaseName string, interval time.Duration) chan struct{}

StartCPUProfileGatherer performs polling-based gathering of the component's CPU profile. It takes the interval b/w consecutive gatherings as an argument and starts the gathering goroutine. To stop the gatherer, close the returned channel.

func StartCmdAndStreamOutput 

func StartCmdAndStreamOutput(cmd *exec.Cmd) (stdout, stderr io.ReadCloser, err error)

StartCmdAndStreamOutput returns stdout and stderr after starting the given cmd.

func StartServeHostnameService added in v1.6.0 

func StartServeHostnameService(c clientset.Interface, svc *v1.Service, ns string, replicas int) ([]string, string, error)

StartServeHostnameService creates a replication controller that serves its hostname and a service on top of it.

func StopServeHostnameService added in v1.6.0 

func StopServeHostnameService(clientset clientset.Interface, ns, name string) error

StopServeHostnameService stops the given service.

func TargetContainers 

func TargetContainers() []string

TargetContainers returns a list of containers for which we want to collect resource usage.

func TestHitNodesFromOutside added in v1.6.0 

func TestHitNodesFromOutside(externalIP string, httpPort int32, timeout time.Duration, expectedHosts sets.String) error

TestHitNodesFromOutside checkes HTTP connectivity from outside.

func TestHitNodesFromOutsideWithCount added in v1.6.0 

func TestHitNodesFromOutsideWithCount(externalIP string, httpPort int32, timeout time.Duration, expectedHosts sets.String,
	countToSucceed int) error

TestHitNodesFromOutsideWithCount checkes HTTP connectivity from outside with count.

func TestUnderTemporaryNetworkFailure added in v1.7.0 

func TestUnderTemporaryNetworkFailure(c clientset.Interface, ns string, node *v1.Node, testFunc func())

TestUnderTemporaryNetworkFailure blocks outgoing network traffic on 'node'. Then runs testFunc and returns its status. At the end (even in case of errors), the network traffic is brought back to normal. This function executes commands on a node so it will work only for some environments.

func TryKill 

func TryKill(cmd *exec.Cmd)

TryKill is rough equivalent of ctrl+c for cleaning up processes. Intended to be run in defer.

func UnblockNetwork 

func UnblockNetwork(from string, to string)

UnblockNetwork unblocks network between the given from value and the given to value.

func UpdateDaemonSetWithRetries added in v1.7.0 

func UpdateDaemonSetWithRetries(c clientset.Interface, namespace, name string, applyUpdate updateDSFunc) (ds *apps.DaemonSet, err error)

UpdateDaemonSetWithRetries updates daemonsets with the given applyUpdate func until it succeeds or a timeout expires.

func UpdateReplicationControllerWithRetries added in v1.5.0 

func UpdateReplicationControllerWithRetries(c clientset.Interface, namespace, name string, applyUpdate updateRcFunc) (*v1.ReplicationController, error)

UpdateReplicationControllerWithRetries retries updating the given rc on conflict with the following steps: 1. Get latest resource 2. applyUpdate 3. Update the resource

func UpdateService added in v1.6.0 

func UpdateService(c clientset.Interface, namespace, serviceName string, update func(*v1.Service)) (*v1.Service, error)

UpdateService fetches a service, calls the update function on it, and then attempts to send the updated service. It retries up to 2 times in the face of timeouts and conflicts.

func UpdateStatefulSetWithRetries added in v1.5.0 

func UpdateStatefulSetWithRetries(c clientset.Interface, namespace, name string, applyUpdate updateStatefulSetFunc) (statefulSet *apps.StatefulSet, err error)

UpdateStatefulSetWithRetries updates statfulset template with retries.

func ValidateController 

func ValidateController(c clientset.Interface, containerImage string, replicas int, containername string, testname string, validator validatorFn, ns string)

ValidateController is a generic mechanism for testing RC's that are running. It takes a container name, a test name, and a validator function which is plugged in by a specific test. "containername": this is grepped for. "containerImage" : this is the name of the image we expect to be launched. Not to confuse w/ images (kitten.jpg) which are validated. "testname": which gets bubbled up to the logging/failure messages if errors happen. "validator" function: This function is given a podID and a client, and it can do some specific validations that way.

func VerifyLatencyWithinThreshold added in v1.11.0 

func VerifyLatencyWithinThreshold(threshold, actual LatencyMetric, metricName string) error

VerifyLatencyWithinThreshold verifies whether 50, 90 and 99th percentiles of a latency metric are within the expected threshold.

func VerifyPods 

func VerifyPods(c clientset.Interface, ns, name string, wantName bool, replicas int32) error

VerifyPods checks if the specified pod is responding.

func VerifyPodsRunning added in v1.6.0 

func VerifyPodsRunning(c clientset.Interface, ns, name string, wantName bool, replicas int32) error

VerifyPodsRunning checks if the specified pod is running.

func VerifyServeHostnameServiceDown added in v1.6.0 

func VerifyServeHostnameServiceDown(c clientset.Interface, host string, serviceIP string, servicePort int) error

VerifyServeHostnameServiceDown verifies that the given service isn't served.

func VerifyServeHostnameServiceUp added in v1.6.0 

func VerifyServeHostnameServiceUp(c clientset.Interface, ns, host string, expectedPods []string, serviceIP string, servicePort int) error

VerifyServeHostnameServiceUp wgets the given serviceIP:servicePort from the given host and from within a pod. The host is expected to be an SSH-able node in the cluster. Each pod in the service is expected to echo its name. These names are compared with the given expectedPods list after a sort | uniq.

func WaitAndVerifyBinds added in v1.6.0 

func WaitAndVerifyBinds(c clientset.Interface, ns string, pvols PVMap, claims PVCMap, testExpected bool) error

WaitAndVerifyBinds searches for bound PVs and PVCs by examining pvols for non-nil claimRefs. NOTE: Each iteration waits for a maximum of 3 minutes per PV and, if the PV is bound, 

up to 3 minutes for the PVC. When the number of PVs != number of PVCs, this can lead
to situations where the maximum wait times are reached several times in succession,
extending test time. Thus, it is recommended to keep the delta between PVs and PVCs
small.

func WaitForAllNodesHealthy added in v1.4.0 

func WaitForAllNodesHealthy(c clientset.Interface, timeout time.Duration) error

WaitForAllNodesHealthy checks whether all registered nodes are ready and all required Pods are running on them.

func WaitForAllNodesSchedulable 

func WaitForAllNodesSchedulable(c clientset.Interface, timeout time.Duration) error

WaitForAllNodesSchedulable waits up to timeout for all (but TestContext.AllowedNotReadyNodes) to become scheduable.

func WaitForApiserverUp 

func WaitForApiserverUp(c clientset.Interface) error

WaitForApiserverUp waits for the kube-apiserver to be up.

func WaitForControlledPods added in v1.9.0 

func WaitForControlledPods(c clientset.Interface, ns, name string, kind schema.GroupKind) (pods *v1.PodList, err error)

WaitForControlledPods waits up to PodListTimeout for getting pods of the specified controller name and return them.

func WaitForControlledPodsRunning added in v1.6.0 

func WaitForControlledPodsRunning(c clientset.Interface, ns, name string, kind schema.GroupKind) error

WaitForControlledPodsRunning waits up to 10 minutes for pods to become Running.

func WaitForControllerManagerUp added in v1.8.0 

func WaitForControllerManagerUp() error

WaitForControllerManagerUp waits for the kube-controller-manager to be up.

func WaitForDaemonSets added in v1.12.0 

func WaitForDaemonSets(c clientset.Interface, ns string, allowedNotReadyNodes int32, timeout time.Duration) error

WaitForDaemonSets for all daemonsets in the given namespace to be ready (defined as all but 'allowedNotReadyNodes' pods associated with that daemonset are ready).

func WaitForDefaultServiceAccountInNamespace 

func WaitForDefaultServiceAccountInNamespace(c clientset.Interface, namespace string) error

WaitForDefaultServiceAccountInNamespace waits for the default service account to be provisioned the default service account is what is associated with pods when they do not specify a service account as a result, pods are not able to be provisioned in a namespace until the service account is provisioned

func WaitForGroupSize added in v1.7.0 

func WaitForGroupSize(group string, size int32) error

WaitForGroupSize waits for node instance group reached the desired size

func WaitForKubeletUp added in v1.8.0 

func WaitForKubeletUp(host string) error

WaitForKubeletUp waits for the kubelet on the given host to be up.

func WaitForMasters added in v1.5.0 

func WaitForMasters(masterPrefix string, c clientset.Interface, size int, timeout time.Duration) error

WaitForMasters waits until the cluster has the desired number of ready masters in it.

func WaitForMatchPodsCondition 

func WaitForMatchPodsCondition(c clientset.Interface, opts metav1.ListOptions, desc string, timeout time.Duration, condition podCondition) error

WaitForMatchPodsCondition finds match pods based on the input ListOptions. waits and checks if all match pods are in the given podCondition

func WaitForNRestartablePods added in v1.15.0 

func WaitForNRestartablePods(ps *testutils.PodStore, expect int, timeout time.Duration) ([]string, error)

WaitForNRestartablePods tries to list restarting pods using ps until it finds expect of them, returning their names if it can do so before timeout.

func WaitForNamespacesDeleted 

func WaitForNamespacesDeleted(c clientset.Interface, namespaces []string, timeout time.Duration) error

WaitForNamespacesDeleted waits for the namespaces to be deleted.

func WaitForNodeHasTaintOrNot added in v1.13.0 

func WaitForNodeHasTaintOrNot(c clientset.Interface, nodeName string, taint *v1.Taint, wantTrue bool, timeout time.Duration) error

WaitForNodeHasTaintOrNot waits for a taint to be added/removed from the node until timeout occurs, whichever comes first.

func WaitForNodeToBe 

func WaitForNodeToBe(c clientset.Interface, name string, conditionType v1.NodeConditionType, wantTrue bool, timeout time.Duration) bool

WaitForNodeToBe returns whether node "name's" condition state matches wantTrue within timeout. If wantTrue is true, it will ensure the node condition status is ConditionTrue; if it's false, it ensures the node condition is in any state other than ConditionTrue (e.g. not true or unknown).

func WaitForNodeToBeNotReady 

func WaitForNodeToBeNotReady(c clientset.Interface, name string, timeout time.Duration) bool

WaitForNodeToBeNotReady returns whether node name is not ready (i.e. the readiness condition is anything but ready, e.g false or unknown) within timeout.

func WaitForNodeToBeReady 

func WaitForNodeToBeReady(c clientset.Interface, name string, timeout time.Duration) bool

WaitForNodeToBeReady returns whether node name is ready within timeout.

func WaitForPVClaimBoundPhase added in v1.7.0 

func WaitForPVClaimBoundPhase(client clientset.Interface, pvclaims []*v1.PersistentVolumeClaim, timeout time.Duration) ([]*v1.PersistentVolume, error)

WaitForPVClaimBoundPhase waits until all pvcs phase set to bound

func WaitForPersistentVolumeClaimDeleted added in v1.10.0 

func WaitForPersistentVolumeClaimDeleted(c clientset.Interface, ns string, pvcName string, Poll, timeout time.Duration) error

WaitForPersistentVolumeClaimDeleted waits for a PersistentVolumeClaim to be removed from the system until timeout occurs, whichever comes first.

func WaitForPersistentVolumeClaimPhase 

func WaitForPersistentVolumeClaimPhase(phase v1.PersistentVolumeClaimPhase, c clientset.Interface, ns string, pvcName string, Poll, timeout time.Duration) error

WaitForPersistentVolumeClaimPhase waits for a PersistentVolumeClaim to be in a specific phase or until timeout occurs, whichever comes first.

func WaitForPersistentVolumeClaimsPhase added in v1.13.0 

func WaitForPersistentVolumeClaimsPhase(phase v1.PersistentVolumeClaimPhase, c clientset.Interface, ns string, pvcNames []string, Poll, timeout time.Duration, matchAny bool) error

WaitForPersistentVolumeClaimsPhase waits for any (if matchAny is true) or all (if matchAny is false) PersistentVolumeClaims to be in a specific phase or until timeout occurs, whichever comes first.

func WaitForPersistentVolumeDeleted 

func WaitForPersistentVolumeDeleted(c clientset.Interface, pvName string, Poll, timeout time.Duration) error

WaitForPersistentVolumeDeleted waits for a PersistentVolume to get deleted or until timeout occurs, whichever comes first.

func WaitForPersistentVolumePhase 

func WaitForPersistentVolumePhase(phase v1.PersistentVolumePhase, c clientset.Interface, pvName string, Poll, timeout time.Duration) error

WaitForPersistentVolumePhase waits for a PersistentVolume to be in a specific phase or until timeout occurs, whichever comes first.

func WaitForPodCondition added in v1.6.0 

func WaitForPodCondition(c clientset.Interface, ns, podName, desc string, timeout time.Duration, condition podCondition) error

WaitForPodCondition waits a pods to be matched to the given condition.

func WaitForPodNameRunningInNamespace added in v1.4.0 

func WaitForPodNameRunningInNamespace(c clientset.Interface, podName, namespace string) error

WaitForPodNameRunningInNamespace waits default amount of time (PodStartTimeout) for the specified pod to become running. Returns an error if timeout occurs first, or pod goes in to failed state.

func WaitForPodNameUnschedulableInNamespace added in v1.10.0 

func WaitForPodNameUnschedulableInNamespace(c clientset.Interface, podName, namespace string) error

WaitForPodNameUnschedulableInNamespace returns an error if it takes too long for the pod to become Pending and have condition Status equal to Unschedulable, if the pod Get api returns an error (IsNotFound or other), or if the pod failed with an unexpected reason. Typically called to test that the passed-in pod is Pending and Unschedulable.

func WaitForPodNoLongerRunningInNamespace 

func WaitForPodNoLongerRunningInNamespace(c clientset.Interface, podName, namespace string) error

WaitForPodNoLongerRunningInNamespace waits default amount of time (DefaultPodDeletionTimeout) for the specified pod to stop running. Returns an error if timeout occurs first.

func WaitForPodNotPending 

func WaitForPodNotPending(c clientset.Interface, ns, podName string) error

WaitForPodNotPending returns an error if it took too long for the pod to go out of pending state. The resourceVersion is used when Watching object changes, it tells since when we care about changes to the pod.

func WaitForPodRunningInNamespace 

func WaitForPodRunningInNamespace(c clientset.Interface, pod *v1.Pod) error

WaitForPodRunningInNamespace waits default amount of time (PodStartTimeout) for the specified pod to become running. Returns an error if timeout occurs first, or pod goes in to failed state.

func WaitForPodSuccessInNamespace 

func WaitForPodSuccessInNamespace(c clientset.Interface, podName string, namespace string) error

WaitForPodSuccessInNamespace returns nil if the pod reached state success, or an error if it reached failure or until podStartupTimeout.

func WaitForPodSuccessInNamespaceSlow 

func WaitForPodSuccessInNamespaceSlow(c clientset.Interface, podName string, namespace string) error

WaitForPodSuccessInNamespaceSlow returns nil if the pod reached state success, or an error if it reached failure or until slowPodStartupTimeout.

func WaitForPodToDisappear 

func WaitForPodToDisappear(c clientset.Interface, ns, podName string, label labels.Selector, interval, timeout time.Duration) error

WaitForPodToDisappear waits the given timeout duration for the specified pod to disappear.

func WaitForPodsReady 

func WaitForPodsReady(c clientset.Interface, ns, name string, minReadySeconds int) error

WaitForPodsReady waits for the pods to become ready.

func WaitForPodsRunningReady 

func WaitForPodsRunningReady(c clientset.Interface, ns string, minPods, allowedNotReadyPods int32, timeout time.Duration, ignoreLabels map[string]string) error

WaitForPodsRunningReady waits up to timeout to ensure that all pods in namespace ns are either running and ready, or failed but controlled by a controller. Also, it ensures that at least minPods are running and ready. It has separate behavior from other 'wait for' pods functions in that it requests the list of pods on every iteration. This is useful, for example, in cluster startup, because the number of pods increases while waiting. All pods that are in SUCCESS state are not counted.

If ignoreLabels is not empty, pods matching this selector are ignored.

func WaitForPodsWithLabel 

func WaitForPodsWithLabel(c clientset.Interface, ns string, label labels.Selector) (pods *v1.PodList, err error)

WaitForPodsWithLabel waits up to PodListTimeout for getting pods with certain label

func WaitForPodsWithLabelRunningReady added in v1.6.0 

func WaitForPodsWithLabelRunningReady(c clientset.Interface, ns string, label labels.Selector, num int, timeout time.Duration) (pods *v1.PodList, err error)

WaitForPodsWithLabelRunningReady waits for exact amount of matching pods to become running and ready. Return the list of matching pods.

func WaitForPodsWithLabelScheduled 

func WaitForPodsWithLabelScheduled(c clientset.Interface, ns string, label labels.Selector) (pods *v1.PodList, err error)

WaitForPodsWithLabelScheduled waits for all matching pods to become scheduled and at least one matching pod exists. Return the list of matching pods.

func WaitForRCPodToDisappear 

func WaitForRCPodToDisappear(c clientset.Interface, ns, rcName, podName string) error

WaitForRCPodToDisappear returns nil if the pod from the given replication controller (described by rcName) no longer exists. In case of failure or too long waiting time, an error is returned.

func WaitForRCToStabilize 

func WaitForRCToStabilize(c clientset.Interface, ns, name string, timeout time.Duration) error

WaitForRCToStabilize waits till the RC has a matching generation/replica count between spec and status.

func WaitForReadyNodes added in v1.8.0 

func WaitForReadyNodes(c clientset.Interface, size int, timeout time.Duration) error

WaitForReadyNodes waits up to timeout for cluster to has desired size and there is no not-ready nodes in it. By cluster size we mean number of Nodes excluding Master Node.

func WaitForReplicationController 

func WaitForReplicationController(c clientset.Interface, namespace, name string, exist bool, interval, timeout time.Duration) error

WaitForReplicationController waits until the RC appears (exist == true), or disappears (exist == false)

func WaitForReplicationControllerwithSelector added in v1.6.0 

func WaitForReplicationControllerwithSelector(c clientset.Interface, namespace string, selector labels.Selector, exist bool, interval,
	timeout time.Duration) error

WaitForReplicationControllerwithSelector waits until any RC with given selector appears (exist == true), or disappears (exist == false)

func WaitForService 

func WaitForService(c clientset.Interface, namespace, name string, exist bool, interval, timeout time.Duration) error

WaitForService waits until the service appears (exist == true), or disappears (exist == false)

func WaitForServiceEndpointsNum 

func WaitForServiceEndpointsNum(c clientset.Interface, namespace, serviceName string, expectNum int, interval, timeout time.Duration) error

WaitForServiceEndpointsNum waits until the amount of endpoints that implement service to expectNum.

func WaitForServiceWithSelector added in v1.6.0 

func WaitForServiceWithSelector(c clientset.Interface, namespace string, selector labels.Selector, exist bool, interval,
	timeout time.Duration) error

WaitForServiceWithSelector waits until any service with given selector appears (exist == true), or disappears (exist == false)

func WaitForStableCluster added in v1.4.0 

func WaitForStableCluster(c clientset.Interface, masterNodes sets.String) int

WaitForStableCluster waits until all existing pods are scheduled and returns their amount.

func WaitForStatefulSetReplicasReady added in v1.10.0 

func WaitForStatefulSetReplicasReady(statefulSetName, ns string, c clientset.Interface, Poll, timeout time.Duration) error

WaitForStatefulSetReplicasReady waits for all replicas of a StatefulSet to become ready or until timeout occurs, whichever comes first.

func WaitOnPVandPVC added in v1.6.0 

func WaitOnPVandPVC(c clientset.Interface, ns string, pv *v1.PersistentVolume, pvc *v1.PersistentVolumeClaim) error

WaitOnPVandPVC waits for the pv and pvc to bind to each other.

func WaitTimeoutForPodEvent added in v1.13.0 

func WaitTimeoutForPodEvent(c clientset.Interface, podName, namespace, eventSelector, msg string, timeout time.Duration) error

WaitTimeoutForPodEvent waits the given timeout duration for a pod event to occur.

func WaitTimeoutForPodNoLongerRunningInNamespace added in v1.4.0 

func WaitTimeoutForPodNoLongerRunningInNamespace(c clientset.Interface, podName, namespace string, timeout time.Duration) error

WaitTimeoutForPodNoLongerRunningInNamespace waits the given timeout duration for the specified pod to stop.

func WaitTimeoutForPodRunningInNamespace added in v1.7.14 

func WaitTimeoutForPodRunningInNamespace(c clientset.Interface, podName, namespace string, timeout time.Duration) error

WaitTimeoutForPodRunningInNamespace waits the given timeout duration for the specified pod to become running.

Types

type APICall 

type APICall struct {
	Resource    string        `json:"resource"`
	Subresource string        `json:"subresource"`
	Verb        string        `json:"verb"`
	Scope       string        `json:"scope"`
	Latency     LatencyMetric `json:"latency"`
	Count       int           `json:"count"`
}

APICall is a struct for managing API call.

type APIResponsiveness 

type APIResponsiveness struct {
	APICalls []APICall `json:"apicalls"`
}

APIResponsiveness is a struct for managing multiple API calls.

func HighLatencyRequests 

func HighLatencyRequests(c clientset.Interface, nodeCount int) (int, *APIResponsiveness, error)

HighLatencyRequests prints top five summary metrics for request types with latency and returns number of such request types above threshold. We use a higher threshold for list calls if nodeCount is above a given threshold (i.e. cluster is big).

func (*APIResponsiveness) Len 

func (a *APIResponsiveness) Len() int

func (*APIResponsiveness) Less 

func (a *APIResponsiveness) Less(i, j int) bool

func (*APIResponsiveness) PrintHumanReadable added in v1.7.0 

func (a *APIResponsiveness) PrintHumanReadable() string

PrintHumanReadable returns metrics with JSON format.

func (*APIResponsiveness) PrintJSON added in v1.7.0 

func (a *APIResponsiveness) PrintJSON() string

PrintJSON returns metrics of PerfData(50, 90 and 99th percentiles) with JSON format.

func (*APIResponsiveness) SummaryKind added in v1.7.0 

func (a *APIResponsiveness) SummaryKind() string

SummaryKind returns the summary of API responsiveness.

func (*APIResponsiveness) Swap 

func (a *APIResponsiveness) Swap(i, j int)

type CleanupActionHandle 

type CleanupActionHandle *int

CleanupActionHandle is an integer pointer type for handling cleanup action

func AddCleanupAction 

func AddCleanupAction(fn func()) CleanupActionHandle

AddCleanupAction installs a function that will be called in the event of the whole test being terminated. This allows arbitrary pieces of the overall test to hook into SynchronizedAfterSuite().

type ClientConfigGetter 

type ClientConfigGetter func() (*restclient.Config, error)

ClientConfigGetter is a func that returns getter to return a config.

type CloudConfig 

type CloudConfig struct {
	APIEndpoint       string
	ProjectID         string
	Zone              string // for multizone tests, arbitrarily chosen zone
	Region            string
	MultiZone         bool
	MultiMaster       bool
	Cluster           string
	MasterName        string
	NodeInstanceGroup string // comma-delimited list of groups' names
	NumNodes          int
	ClusterIPRange    string
	ClusterTag        string
	Network           string
	ConfigFile        string // for azure and openstack
	NodeTag           string
	MasterTag         string

	Provider ProviderInterface
}

CloudConfig holds the cloud configuration for e2e test suites.

type ClusterVerification 

type ClusterVerification struct {
	// contains filtered or unexported fields
}

ClusterVerification is a struct for a verification of cluster state.

func (*ClusterVerification) ForEach 

func (cl *ClusterVerification) ForEach(podFunc func(v1.Pod)) error

ForEach runs a function against every verifiable pod. Be warned that this doesn't wait for "n" pods to verify, so it may return very quickly if you have strict pod state requirements.

For example, if you require at least 5 pods to be running before your test will pass, its smart to first call "clusterVerification.WaitFor(5)" before you call clusterVerification.ForEach.

func (*ClusterVerification) WaitFor 

func (cl *ClusterVerification) WaitFor(atLeast int, timeout time.Duration) ([]v1.Pod, error)

WaitFor waits for some minimum number of pods to be verified, according to the PodStateVerification definition.

func (*ClusterVerification) WaitForOrFail 

func (cl *ClusterVerification) WaitForOrFail(atLeast int, timeout time.Duration)

WaitForOrFail provides a shorthand WaitFor with failure as an option if anything goes wrong.

type ContainerResourceGatherer added in v1.10.0 

type ContainerResourceGatherer struct {
	// contains filtered or unexported fields
}

ContainerResourceGatherer is a struct for gathering container resource.

func NewResourceUsageGatherer 

func NewResourceUsageGatherer(c clientset.Interface, options ResourceGathererOptions, pods *v1.PodList) (*ContainerResourceGatherer, error)

NewResourceUsageGatherer returns a new ContainerResourceGatherer.

func (*ContainerResourceGatherer) StartGatheringData added in v1.10.0 

func (g *ContainerResourceGatherer) StartGatheringData()

StartGatheringData starts a stat gathering worker blocks for each node to track, and blocks until StopAndSummarize is called.

func (*ContainerResourceGatherer) StopAndSummarize added in v1.10.0 

func (g *ContainerResourceGatherer) StopAndSummarize(percentiles []int, constraints map[string]ResourceConstraint) (*ResourceUsageSummary, error)

StopAndSummarize stops stat gathering workers, processes the collected stats, generates resource summary for the passed-in percentiles, and returns the summary. It returns an error if the resource usage at any percentile is beyond the specified resource constraints.

type ContainerResourceUsage 

type ContainerResourceUsage struct {
	Name                    string
	Timestamp               time.Time
	CPUUsageInCores         float64
	MemoryUsageInBytes      uint64
	MemoryWorkingSetInBytes uint64
	MemoryRSSInBytes        uint64
	// The interval used to calculate CPUUsageInCores.
	CPUInterval time.Duration
}

ContainerResourceUsage is a structure for gathering container resource usage.

type ContainersCPUSummary 

type ContainersCPUSummary map[string]map[float64]float64

ContainersCPUSummary is indexed by the container name with each entry a (percentile, value) map.

type CreateTestingNSFn 

type CreateTestingNSFn func(baseName string, c clientset.Interface, labels map[string]string) (*v1.Namespace, error)

CreateTestingNSFn is a func that is responsible for creating namespace used for executing e2e tests.

type E2ETestNodePreparer added in v1.5.0 

type E2ETestNodePreparer struct {
	// contains filtered or unexported fields
}

E2ETestNodePreparer implements testutils.TestNodePreparer interface, which is used to create/modify Nodes before running a test.

func (*E2ETestNodePreparer) CleanupNodes added in v1.5.0 

func (p *E2ETestNodePreparer) CleanupNodes() error

CleanupNodes cleanups nodes in the cluster.

func (*E2ETestNodePreparer) PrepareNodes added in v1.5.0 

func (p *E2ETestNodePreparer) PrepareNodes() error

PrepareNodes prepares nodes in the cluster.

type EtcdMetrics added in v1.12.0 

type EtcdMetrics struct {
	BackendCommitDuration     HistogramVec `json:"backendCommitDuration"`
	SnapshotSaveTotalDuration HistogramVec `json:"snapshotSaveTotalDuration"`
	PeerRoundTripTime         HistogramVec `json:"peerRoundTripTime"`
	WalFsyncDuration          HistogramVec `json:"walFsyncDuration"`
	MaxDatabaseSize           float64      `json:"maxDatabaseSize"`
}

EtcdMetrics is a struct for managing etcd metrics.

func (*EtcdMetrics) PrintHumanReadable added in v1.12.0 

func (l *EtcdMetrics) PrintHumanReadable() string

PrintHumanReadable returns etcd metrics with JSON format.

func (*EtcdMetrics) PrintJSON added in v1.12.0 

func (l *EtcdMetrics) PrintJSON() string

PrintJSON returns etcd metrics with JSON format.

func (*EtcdMetrics) SummaryKind added in v1.12.0 

func (l *EtcdMetrics) SummaryKind() string

SummaryKind returns the summary of etcd metrics.

type EtcdMetricsCollector added in v1.12.0 

type EtcdMetricsCollector struct {
	// contains filtered or unexported fields
}

EtcdMetricsCollector is a struct for managing etcd metrics collector.

func NewEtcdMetricsCollector added in v1.12.0 

func NewEtcdMetricsCollector() *EtcdMetricsCollector

NewEtcdMetricsCollector creates a new etcd metrics collector.

func (*EtcdMetricsCollector) GetMetrics added in v1.12.0 

func (mc *EtcdMetricsCollector) GetMetrics() *EtcdMetrics

GetMetrics returns metrics of etcd metrics collector.

func (*EtcdMetricsCollector) StartCollecting added in v1.12.0 

func (mc *EtcdMetricsCollector) StartCollecting(interval time.Duration)

StartCollecting starts to collect etcd db size metric periodically and updates MaxDatabaseSize accordingly.

func (*EtcdMetricsCollector) StopAndSummarize added in v1.12.0 

func (mc *EtcdMetricsCollector) StopAndSummarize() error

StopAndSummarize stops etcd metrics collector and summarizes the metrics.

type EventsLister added in v1.5.0 

type EventsLister func(opts metav1.ListOptions, ns string) (*v1.EventList, error)

EventsLister is a func that lists events.

type ExecOptions added in v1.5.0 

type ExecOptions struct {
	Command       []string
	Namespace     string
	PodName       string
	ContainerName string
	Stdin         io.Reader
	CaptureStdout bool
	CaptureStderr bool
	// If false, whitespace in std{err,out} will be removed.
	PreserveWhitespace bool
}

ExecOptions passed to ExecWithOptions

type Factory added in v1.13.0 

type Factory func() (ProviderInterface, error)

Factory is a func which operates provider specific behavior.

type FlakeReport added in v1.12.0 

type FlakeReport struct {
	Flakes     []string `json:"flakes"`
	FlakeCount int      `json:"flakeCount"`
	// contains filtered or unexported fields
}

FlakeReport is a struct for managing the flake report.

func NewFlakeReport added in v1.12.0 

func NewFlakeReport() *FlakeReport

NewFlakeReport returns a new flake report.

func (*FlakeReport) GetFlakeCount added in v1.12.0 

func (f *FlakeReport) GetFlakeCount() int

GetFlakeCount returns the flake count.

func (*FlakeReport) PrintHumanReadable added in v1.12.0 

func (f *FlakeReport) PrintHumanReadable() string

PrintHumanReadable returns string of flake report.

func (*FlakeReport) PrintJSON added in v1.12.0 

func (f *FlakeReport) PrintJSON() string

PrintJSON returns the summary of frake report with JSON format.

func (*FlakeReport) RecordFlakeIfError added in v1.12.0 

func (f *FlakeReport) RecordFlakeIfError(err error, optionalDescription ...interface{})

RecordFlakeIfError records the error (if non-nil) as a flake along with an optional description. This can be used as a replacement of framework.ExpectNoError() for non-critical errors that can be considered as 'flakes' to avoid causing failures in tests.

func (*FlakeReport) SummaryKind added in v1.12.0 

func (f *FlakeReport) SummaryKind() string

SummaryKind returns the summary of flake report.

type Framework 

type Framework struct {
	BaseName string

	// Set together with creating the ClientSet and the namespace.
	// Guaranteed to be unique in the cluster even when running the same
	// test multiple times in parallel.
	UniqueName string

	ClientSet                        clientset.Interface
	KubemarkExternalClusterClientSet clientset.Interface

	DynamicClient dynamic.Interface

	ScalesGetter scaleclient.ScalesGetter

	SkipNamespaceCreation bool          // Whether to skip creating a namespace
	Namespace             *v1.Namespace // Every test has at least one namespace unless creation is skipped

	NamespaceDeletionTimeout time.Duration
	SkipPrivilegedPSPBinding bool // Whether to skip creating a binding to the privileged PSP in the test namespace

	// Constraints that passed to a check which is executed after data is gathered to
	// see if 99% of results are within acceptable bounds. It has to be injected in the test,
	// as expectations vary greatly. Constraints are grouped by the container names.
	AddonResourceConstraints map[string]ResourceConstraint

	// configuration for framework's client
	Options Options

	// Place where various additional data is stored during test run to be printed to ReportDir,
	// or stdout if ReportDir is not set once test ends.
	TestSummaries []TestDataSummary
	// contains filtered or unexported fields
}

Framework supports common operations used by e2e tests; it will keep a client & a namespace for you. Eventual goal is to merge this with integration test framework.

func NewDefaultFramework 

func NewDefaultFramework(baseName string) *Framework

NewDefaultFramework makes a new framework and sets up a BeforeEach/AfterEach for you (you can write additional before/after each functions).

func NewFramework 

func NewFramework(baseName string, options Options, client clientset.Interface) *Framework

NewFramework creates a test framework.

func (*Framework) AddNamespacesToDelete added in v1.11.0 

func (f *Framework) AddNamespacesToDelete(namespaces ...*v1.Namespace)

AddNamespacesToDelete adds one or more namespaces to be deleted when the test completes.

func (*Framework) AfterEach 

func (f *Framework) AfterEach()

AfterEach deletes the namespace, after reading its events.

func (*Framework) BeforeEach 

func (f *Framework) BeforeEach()

BeforeEach gets a client and makes a namespace.

func (*Framework) CheckFileSizeViaContainer added in v1.4.6 

func (f *Framework) CheckFileSizeViaContainer(podName, containerName, path string) (string, error)

CheckFileSizeViaContainer returns the list of file size under the specified path.

func (*Framework) CreateFromManifests added in v1.13.0 

func (f *Framework) CreateFromManifests(patch func(item interface{}) error, files ...string) (func(), error)

CreateFromManifests is a combination of LoadFromManifests, PatchItems, patching with an optional custom function, and CreateItems.

func (*Framework) CreateItems added in v1.13.0 

func (f *Framework) CreateItems(items ...interface{}) (func(), error)

CreateItems creates the items. Each of them must be an API object of a type that is registered in Factory.

It returns either a cleanup function or an error, but never both.

Cleaning up after a test can be triggered in two ways:

PatchItems has the some limitations as LoadFromManifests: - only some common items are supported, unknown ones trigger an error - only the latest stable API version for each item is supported

func (*Framework) CreateNamespace 

func (f *Framework) CreateNamespace(baseName string, labels map[string]string) (*v1.Namespace, error)

CreateNamespace creates a namespace for e2e testing.

func (*Framework) CreatePodsPerNodeForSimpleApp 

func (f *Framework) CreatePodsPerNodeForSimpleApp(appName string, podSpec func(n v1.Node) v1.PodSpec, maxCount int) map[string]string

CreatePodsPerNodeForSimpleApp creates pods w/ labels. Useful for tests which make a bunch of pods w/o any networking.

func (*Framework) CreateServiceForSimpleApp 

func (f *Framework) CreateServiceForSimpleApp(contPort, svcPort int, appName string) *v1.Service

CreateServiceForSimpleApp returns a service that selects/exposes pods (send -1 ports if no exposure needed) with an app label.

func (*Framework) CreateServiceForSimpleAppWithPods 

func (f *Framework) CreateServiceForSimpleAppWithPods(contPort int, svcPort int, appName string, podSpec func(n v1.Node) v1.PodSpec, count int, block bool) (*v1.Service, error)

CreateServiceForSimpleAppWithPods is a convenience wrapper to create a service and its matching pods all at once.

func (*Framework) ExecCommandInContainer added in v1.4.0 

func (f *Framework) ExecCommandInContainer(podName, containerName string, cmd ...string) string

ExecCommandInContainer executes a command in the specified container.

func (*Framework) ExecCommandInContainerWithFullOutput added in v1.5.0 

func (f *Framework) ExecCommandInContainerWithFullOutput(podName, containerName string, cmd ...string) (string, string, error)

ExecCommandInContainerWithFullOutput executes a command in the specified container and return stdout, stderr and error

func (*Framework) ExecShellInContainer added in v1.4.0 

func (f *Framework) ExecShellInContainer(podName, containerName string, cmd string) string

ExecShellInContainer executes the specified command on the pod's container.

func (*Framework) ExecShellInPod added in v1.4.0 

func (f *Framework) ExecShellInPod(podName string, cmd string) string

ExecShellInPod executes the specified command on the pod.

func (*Framework) ExecShellInPodWithFullOutput added in v1.5.0 

func (f *Framework) ExecShellInPodWithFullOutput(podName string, cmd string) (string, string, error)

ExecShellInPodWithFullOutput executes the specified command on the Pod and returns stdout, stderr and error.

func (*Framework) ExecWithOptions added in v1.5.0 

func (f *Framework) ExecWithOptions(options ExecOptions) (string, string, error)

ExecWithOptions executes a command in the specified container, returning stdout, stderr and error. `options` allowed for additional parameters to be passed.

func (*Framework) LoadFromManifests added in v1.13.0 

func (f *Framework) LoadFromManifests(files ...string) ([]interface{}, error)

LoadFromManifests loads .yaml or .json manifest files and returns all items that it finds in them. It supports all items for which there is a factory registered in factories and .yaml files with multiple items separated by "---". Files are accessed via the "testfiles" package, which means they can come from a file system or be built into the binary.

LoadFromManifests has some limitations:

func (*Framework) MatchContainerOutput added in v1.4.0 

func (f *Framework) MatchContainerOutput(
	pod *v1.Pod,
	containerName string,
	expectedOutput []string,
	matcher func(string, ...interface{}) gomegatypes.GomegaMatcher) error

MatchContainerOutput creates a pod and waits for all it's containers to exit with success. It then tests that the matcher with each expectedOutput matches the output of the specified container.

func (*Framework) NewAgnhostPod added in v1.15.0 

func (f *Framework) NewAgnhostPod(name string, args ...string) *v1.Pod

NewAgnhostPod returns a pod that uses the agnhost image. The image's binary supports various subcommands that behave the same, no matter the underlying OS.

func (*Framework) NewClusterVerification 

func (f *Framework) NewClusterVerification(namespace *v1.Namespace, filter PodStateVerification) *ClusterVerification

NewClusterVerification creates a new cluster verification.

func (*Framework) NewTestPod added in v1.6.0 

func (f *Framework) NewTestPod(name string, requests v1.ResourceList, limits v1.ResourceList) *v1.Pod

NewTestPod returns a pod that has the specified requests and limits

func (*Framework) PatchItems added in v1.13.0 

func (f *Framework) PatchItems(items ...interface{}) error

PatchItems modifies the given items in place such that each test gets its own instances, to avoid conflicts between different tests and between tests and normal deployments.

This is done by: - creating namespaced items inside the test's namespace - changing the name of non-namespaced items like ClusterRole

PatchItems has some limitations: - only some common items are supported, unknown ones trigger an error - only the latest stable API version for each item is supported

func (*Framework) PatchName added in v1.13.0 

func (f *Framework) PatchName(item *string)

PatchName makes the name of some item unique by appending the generated unique name.

func (*Framework) PatchNamespace added in v1.13.0 

func (f *Framework) PatchNamespace(item *string)

PatchNamespace moves the item into the test's namespace. Not all items can be namespaced. For those, the name also needs to be patched.

func (*Framework) PodClient added in v1.4.0 

func (f *Framework) PodClient() *PodClient

PodClient is a convenience method for getting a pod client interface in the framework's namespace, possibly applying test-suite specific transformations to the pod spec, e.g. for node e2e pod scheduling.

func (*Framework) PodClientNS added in v1.6.0 

func (f *Framework) PodClientNS(namespace string) *PodClient

PodClientNS is a convenience method for getting a pod client interface in an alternative namespace, possibly applying test-suite specific transformations to the pod spec, e.g. for node e2e pod scheduling.

func (*Framework) ReadFileViaContainer 

func (f *Framework) ReadFileViaContainer(podName, containerName string, path string) (string, error)

ReadFileViaContainer reads a file using kubectl exec cat <path>.

func (*Framework) RecordFlakeIfError added in v1.12.0 

func (f *Framework) RecordFlakeIfError(err error, optionalDescription ...interface{})

RecordFlakeIfError records flakeness info if error happens. NOTE: This function is not used at any places yet, but we are in progress for https://github.com/kubernetes/kubernetes/issues/66239 which requires this. Please don't remove this.

func (*Framework) TestContainerOutput 

func (f *Framework) TestContainerOutput(scenarioName string, pod *v1.Pod, containerIndex int, expectedOutput []string)

TestContainerOutput runs the given pod in the given namespace and waits for all of the containers in the podSpec to move into the 'Success' status, and tests the specified container log against the given expected output using a substring matcher.

func (*Framework) TestContainerOutputRegexp 

func (f *Framework) TestContainerOutputRegexp(scenarioName string, pod *v1.Pod, containerIndex int, expectedOutput []string)

TestContainerOutputRegexp runs the given pod in the given namespace and waits for all of the containers in the podSpec to move into the 'Success' status, and tests the specified container log against the given expected output using a regexp matcher.

func (*Framework) WaitForPodNoLongerRunning 

func (f *Framework) WaitForPodNoLongerRunning(podName string) error

WaitForPodNoLongerRunning waits for the pod to no longer be running in the namespace, for either success or failure.

func (*Framework) WaitForPodNotFound added in v1.9.0 

func (f *Framework) WaitForPodNotFound(podName string, timeout time.Duration) error

WaitForPodNotFound waits for the pod to be completely terminated (not "Get-able").

func (*Framework) WaitForPodReady 

func (f *Framework) WaitForPodReady(podName string) error

WaitForPodReady waits for the pod to flip to ready in the namespace.

func (*Framework) WaitForPodRunning 

func (f *Framework) WaitForPodRunning(podName string) error

WaitForPodRunning waits for the pod to run in the namespace.

func (*Framework) WaitForPodRunningSlow 

func (f *Framework) WaitForPodRunningSlow(podName string) error

WaitForPodRunningSlow waits for the pod to run in the namespace. It has a longer timeout then WaitForPodRunning (util.slowPodStartTimeout).

func (*Framework) WaitForPodTerminated 

func (f *Framework) WaitForPodTerminated(podName, reason string) error

WaitForPodTerminated waits for the pod to be terminated with the given reason.

func (*Framework) WriteFileViaContainer 

func (f *Framework) WriteFileViaContainer(podName, containerName string, path string, contents string) error

WriteFileViaContainer writes a file using kubectl exec echo <contents> > <path> via specified container because of the primitive technique we're using here, we only allow ASCII alphanumeric characters

type HTTPPokeParams added in v1.13.6 

type HTTPPokeParams struct {
	Timeout        time.Duration
	ExpectCode     int // default = 200
	BodyContains   string
	RetriableCodes []int
}

HTTPPokeParams is a struct for HTTP poke parameters.

type HTTPPokeResult added in v1.13.6 

type HTTPPokeResult struct {
	Status HTTPPokeStatus
	Code   int    // HTTP code: 0 if the connection was not made
	Error  error  // if there was any error
	Body   []byte // if code != 0
}

HTTPPokeResult is a struct for HTTP poke result.

func PokeHTTP added in v1.13.6 

func PokeHTTP(host string, port int, path string, params *HTTPPokeParams) HTTPPokeResult

PokeHTTP tries to connect to a host on a port for a given URL path. Callers can specify additional success parameters, if desired.

The result status will be characterized as precisely as possible, given the known users of this.

The result code will be zero in case of any failure to connect, or non-zero if the HTTP transaction completed (even if the other test params make this a failure).

The result error will be populated for any status other than Success.

The result body will be populated if the HTTP transaction was completed, even if the other test params make this a failure).

type HTTPPokeStatus added in v1.13.6 

type HTTPPokeStatus string

HTTPPokeStatus is string for representing HTTP poke status. 

const (
	// HTTPSuccess is HTTP poke status which is success.
	HTTPSuccess HTTPPokeStatus = "Success"
	// HTTPError is HTTP poke status which is error.
	HTTPError HTTPPokeStatus = "UnknownError"
	// HTTPTimeout is HTTP poke status which is timeout.
	HTTPTimeout HTTPPokeStatus = "TimedOut"
	// HTTPRefused is HTTP poke status which is connection refused.
	HTTPRefused HTTPPokeStatus = "ConnectionRefused"
	// HTTPRetryCode is HTTP poke status which is retry code.
	HTTPRetryCode HTTPPokeStatus = "RetryCode"
	// HTTPWrongCode is HTTP poke status which is wrong code.
	HTTPWrongCode HTTPPokeStatus = "WrongCode"
	// HTTPBadResponse is HTTP poke status which is bad response.
	HTTPBadResponse HTTPPokeStatus = "BadResponse"
)

type Histogram added in v1.12.0 

type Histogram struct {
	Labels  map[string]string `json:"labels"`
	Buckets map[string]int    `json:"buckets"`
}

Histogram is a struct for managing histogram.

type HistogramVec added in v1.12.0 

type HistogramVec []Histogram

HistogramVec is an array of Histogram.

type InvariantFunc 

type InvariantFunc func(older, newer runtime.Object) error

InvariantFunc is a func that checks for invariant.

type ItemFactory added in v1.13.0 

type ItemFactory interface {
	// New returns a new empty item.
	New() runtime.Object

	// Create is responsible for creating the item. It returns an
	// error or a cleanup function for the created item.
	// If the item is of an unsupported type, it must return
	// an error that has errorItemNotSupported as cause.
	Create(f *Framework, item interface{}) (func() error, error)
}

ItemFactory provides support for creating one particular item. The type gets exported because other packages might want to extend the set of pre-defined factories.

type KubeCluster 

type KubeCluster struct {
	Name    string `yaml:"name"`
	Cluster struct {
		CertificateAuthorityData string `yaml:"certificate-authority-data"`
		Server                   string `yaml:"server"`
	} `yaml:"cluster"`
}

KubeCluster is a struct for managing kubernetes cluster info.

type KubeConfig 

type KubeConfig struct {
	Contexts []struct {
		Name    string `yaml:"name"`
		Context struct {
			Cluster string `yaml:"cluster"`
			User    string
		} `yaml:"context"`
	} `yaml:"contexts"`

	Clusters []KubeCluster `yaml:"clusters"`

	Users []KubeUser `yaml:"users"`
}

KubeConfig is a struct for managing kubernetes config.

func (*KubeConfig) FindCluster added in v1.6.0 

func (kc *KubeConfig) FindCluster(name string) *KubeCluster

FindCluster returns cluster info which is the specified cluster name.

func (*KubeConfig) FindUser added in v1.6.0 

func (kc *KubeConfig) FindUser(name string) *KubeUser

FindUser returns user info which is the specified user name.

type KubeUser 

type KubeUser struct {
	Name string `yaml:"name"`
	User struct {
		Username string `yaml:"username"`
		Password string `yaml:"password"`
		Token    string `yaml:"token"`
	} `yaml:"user"`
}

KubeUser is a struct for managing kubernetes user info.

type KubectlBuilder added in v1.15.0 

type KubectlBuilder struct {
	// contains filtered or unexported fields
}

KubectlBuilder is used to build, customize and execute a kubectl Command. Add more functions to customize the builder as needed.

func NewKubectlCommand 

func NewKubectlCommand(args ...string) *KubectlBuilder

NewKubectlCommand returns a KubectlBuilder for running kubectl.

func (KubectlBuilder) Exec added in v1.15.0 

func (b KubectlBuilder) Exec() (string, error)

Exec runs the kubectl executable.

func (KubectlBuilder) ExecOrDie added in v1.15.0 

func (b KubectlBuilder) ExecOrDie() string

ExecOrDie runs the kubectl executable or dies if error occurs.

func (*KubectlBuilder) WithEnv added in v1.15.0 

func (b *KubectlBuilder) WithEnv(env []string) *KubectlBuilder

WithEnv sets the given environment and returns itself.

func (KubectlBuilder) WithStdinData added in v1.15.0 

func (b KubectlBuilder) WithStdinData(data string) *KubectlBuilder

WithStdinData sets the given data to stdin and returns itself.

func (KubectlBuilder) WithStdinReader added in v1.15.0 

func (b KubectlBuilder) WithStdinReader(reader io.Reader) *KubectlBuilder

WithStdinReader sets the given reader and returns itself.

func (*KubectlBuilder) WithTimeout added in v1.15.0 

func (b *KubectlBuilder) WithTimeout(t <-chan time.Time) *KubectlBuilder

WithTimeout sets the given timeout and returns itself.

type KubeletLatencyMetric 

type KubeletLatencyMetric struct {
	// eg: list, info, create
	Operation string
	// eg: sync_pods, pod_worker
	Method string
	// 0 <= quantile <=1, e.g. 0.95 is 95%tile, 0.5 is median.
	Quantile float64
	Latency  time.Duration
}

KubeletLatencyMetric stores metrics scraped from the kubelet server's /metric endpoint. TODO: Get some more structure around the metrics and this type

type KubeletLatencyMetrics 

type KubeletLatencyMetrics []KubeletLatencyMetric

KubeletLatencyMetrics implements sort.Interface for []KubeletMetric based on the latency field.

func GetDefaultKubeletLatencyMetrics added in v1.11.0 

func GetDefaultKubeletLatencyMetrics(ms metrics.KubeletMetrics) KubeletLatencyMetrics

GetDefaultKubeletLatencyMetrics calls GetKubeletLatencyMetrics with a set of default metricNames identifying common latency metrics. Note that the KubeletMetrics passed in should not contain subsystem prefix.

func GetKubeletLatencyMetrics 

func GetKubeletLatencyMetrics(ms metrics.KubeletMetrics, filterMetricNames sets.String) KubeletLatencyMetrics

GetKubeletLatencyMetrics filters ms to include only those contained in the metricNames set, then constructs a KubeletLatencyMetrics list based on the samples associated with those metrics.

func HighLatencyKubeletOperations 

func HighLatencyKubeletOperations(c clientset.Interface, threshold time.Duration, nodeName string, logFunc func(fmt string, args ...interface{})) (KubeletLatencyMetrics, error)

HighLatencyKubeletOperations logs and counts the high latency metrics exported by the kubelet server via /metrics.

func (KubeletLatencyMetrics) Len 

func (a KubeletLatencyMetrics) Len() int

func (KubeletLatencyMetrics) Less 

func (a KubeletLatencyMetrics) Less(i, j int) bool

func (KubeletLatencyMetrics) Swap 

func (a KubeletLatencyMetrics) Swap(i, j int)

type KubemarkResourceUsage added in v1.6.0 

type KubemarkResourceUsage struct {
	Name                    string
	MemoryWorkingSetInBytes uint64
	CPUUsageInCores         float64
}

KubemarkResourceUsage is a struct for tracking the resource usage of kubemark.

type LatencyMetric 

type LatencyMetric struct {
	Perc50  time.Duration `json:"Perc50"`
	Perc90  time.Duration `json:"Perc90"`
	Perc99  time.Duration `json:"Perc99"`
	Perc100 time.Duration `json:"Perc100"`
}

LatencyMetric is a struct for dashboard metrics.

func ExtractLatencyMetrics 

func ExtractLatencyMetrics(latencies []PodLatencyData) LatencyMetric

ExtractLatencyMetrics returns latency metrics for each percentile(50th, 90th and 99th).

type LatencySlice 

type LatencySlice []PodLatencyData

LatencySlice is an array of PodLatencyData which encapsulates pod startup latency information.

func (LatencySlice) Len 

func (a LatencySlice) Len() int

func (LatencySlice) Less 

func (a LatencySlice) Less(i, j int) bool

func (LatencySlice) Swap 

func (a LatencySlice) Swap(i, j int)

type LogSizeDataTimeseries 

type LogSizeDataTimeseries map[string]map[string][]TimestampedSize

LogSizeDataTimeseries is map of timestamped size.

type LogSizeGatherer 

type LogSizeGatherer struct {
	// contains filtered or unexported fields
}

LogSizeGatherer is a worker which grabs a WorkItem from the channel and does assigned work.

func (*LogSizeGatherer) Run 

func (g *LogSizeGatherer) Run()

Run starts log size gathering.

func (*LogSizeGatherer) Work 

func (g *LogSizeGatherer) Work() bool

Work does a single unit of work: tries to take out a WorkItem from the queue, ssh-es into a given machine, gathers data, writes it to the shared <data> map, and creates a gorouting which reinserts work item into the queue with a <pollingPeriod> delay. Returns false if worker should exit.

type LogsSizeData 

type LogsSizeData struct {
	// contains filtered or unexported fields
}

LogsSizeData is a structure for handling timeseries of log size data and lock.

type LogsSizeDataSummary 

type LogsSizeDataSummary map[string]map[string]SingleLogSummary

LogsSizeDataSummary is map of log summary. node -> file -> data

func (*LogsSizeDataSummary) PrintHumanReadable 

func (s *LogsSizeDataSummary) PrintHumanReadable() string

PrintHumanReadable returns string of log size data summary. TODO: make sure that we don't need locking here

func (*LogsSizeDataSummary) PrintJSON 

func (s *LogsSizeDataSummary) PrintJSON() string

PrintJSON returns the summary of log size data with JSON format.

func (*LogsSizeDataSummary) SummaryKind added in v1.7.0 

func (s *LogsSizeDataSummary) SummaryKind() string

SummaryKind returns the summary of log size data summary.

type LogsSizeVerifier 

type LogsSizeVerifier struct {
	// contains filtered or unexported fields
}

LogsSizeVerifier gathers data about log files sizes from master and node machines. It oversees a <workersNo> workers which do the gathering.

func NewLogsVerifier 

func NewLogsVerifier(c clientset.Interface, stopChannel chan bool) *LogsSizeVerifier

NewLogsVerifier creates a new LogsSizeVerifier which will stop when stopChannel is closed

func (*LogsSizeVerifier) GetSummary 

func (s *LogsSizeVerifier) GetSummary() *LogsSizeDataSummary

GetSummary returns a summary (average generation rate and number of probes) of the data gathered by LogSizeVerifier

func (*LogsSizeVerifier) Run 

func (s *LogsSizeVerifier) Run()

Run starts log size gathering. It starts a gorouting for every worker and then blocks until stopChannel is closed

type MetricsForE2E 

type MetricsForE2E metrics.Collection

MetricsForE2E is metrics collection of components.

func (*MetricsForE2E) PrintHumanReadable 

func (m *MetricsForE2E) PrintHumanReadable() string

PrintHumanReadable returns e2e metrics with JSON format.

func (*MetricsForE2E) PrintJSON 

func (m *MetricsForE2E) PrintJSON() string

PrintJSON returns e2e metrics with JSON format.

func (*MetricsForE2E) SummaryKind added in v1.7.0 

func (m *MetricsForE2E) SummaryKind() string

SummaryKind returns the summary of e2e metrics.

type NetworkingTestConfig added in v1.5.0 

type NetworkingTestConfig struct {
	// TestContaienrPod is a test pod running the netexec image. It is capable
	// of executing tcp/udp requests against ip:port.
	TestContainerPod *v1.Pod
	// HostTestContainerPod is a pod running using the hostexec image.
	HostTestContainerPod *v1.Pod
	// if the HostTestContainerPod is running with HostNetwork=true.
	HostNetwork bool
	// EndpointPods are the pods belonging to the Service created by this
	// test config. Each invocation of `setup` creates a service with
	// 1 pod per node running the netexecImage.
	EndpointPods []*v1.Pod

	// NodePortService is a Service with Type=NodePort spanning over all
	// endpointPods.
	NodePortService *v1.Service
	// SessionAffinityService is a Service with SessionAffinity=ClientIP
	// spanning over all endpointPods.
	SessionAffinityService *v1.Service
	// ExternalAddrs is a list of external IPs of nodes in the cluster.
	ExternalAddrs []string
	// Nodes is a list of nodes in the cluster.
	Nodes []v1.Node
	// MaxTries is the number of retries tolerated for tests run against
	// endpoints and services created by this config.
	MaxTries int
	// The ClusterIP of the Service reated by this test config.
	ClusterIP string
	// External ip of first node for use in nodePort testing.
	NodeIP string
	// The http/udp nodePorts of the Service.
	NodeHTTPPort int
	NodeUDPPort  int
	// The kubernetes namespace within which all resources for this
	// config are created
	Namespace string
	// contains filtered or unexported fields
}

NetworkingTestConfig is a convenience class around some utility methods for testing kubeproxy/networking/services/endpoints.

func NewCoreNetworkingTestConfig added in v1.5.0 

func NewCoreNetworkingTestConfig(f *Framework, hostNetwork bool) *NetworkingTestConfig

NewCoreNetworkingTestConfig creates and sets up a new test config helper for Node E2E.

func NewNetworkingTestConfig added in v1.5.0 

func NewNetworkingTestConfig(f *Framework) *NetworkingTestConfig

NewNetworkingTestConfig creates and sets up a new test config helper.

func (*NetworkingTestConfig) DeleteNetProxyPod added in v1.5.0 

func (config *NetworkingTestConfig) DeleteNetProxyPod()

DeleteNetProxyPod deletes the first endpoint pod and waits for it being removed.

func (*NetworkingTestConfig) DeleteNodePortService added in v1.5.0 

func (config *NetworkingTestConfig) DeleteNodePortService()

DeleteNodePortService deletes NodePort service.

func (*NetworkingTestConfig) DialFromContainer added in v1.5.0 

func (config *NetworkingTestConfig) DialFromContainer(protocol, containerIP, targetIP string, containerHTTPPort, targetPort, maxTries, minTries int, expectedEps sets.String)

DialFromContainer executes a curl via kubectl exec in a test container, which might then translate to a tcp or udp request based on the protocol argument in the url.

  • minTries is the minimum number of curl attempts required before declaring success. Set to 0 if you'd like to return as soon as all endpoints respond at least once.
  • maxTries is the maximum number of curl attempts. If this many attempts pass and we don't see all expected endpoints, the test fails.
  • expectedEps is the set of endpointnames to wait for. Typically this is also the hostname reported by each pod in the service through /hostName.

maxTries == minTries will confirm that we see the expected endpoints and no more for maxTries. Use this if you want to eg: fail a readiness check on a pod and confirm it doesn't show up as an endpoint.

func (*NetworkingTestConfig) DialFromEndpointContainer added in v1.5.0 

func (config *NetworkingTestConfig) DialFromEndpointContainer(protocol, targetIP string, targetPort, maxTries, minTries int, expectedEps sets.String)

DialFromEndpointContainer executes a curl via kubectl exec in an endpoint container.

func (*NetworkingTestConfig) DialFromNode added in v1.5.0 

func (config *NetworkingTestConfig) DialFromNode(protocol, targetIP string, targetPort, maxTries, minTries int, expectedEps sets.String)

DialFromNode executes a tcp or udp request based on protocol via kubectl exec in a test container running with host networking.

  • minTries is the minimum number of curl attempts required before declaring success. Set to 0 if you'd like to return as soon as all endpoints respond at least once.
  • maxTries is the maximum number of curl attempts. If this many attempts pass and we don't see all expected endpoints, the test fails.

maxTries == minTries will confirm that we see the expected endpoints and no more for maxTries. Use this if you want to eg: fail a readiness check on a pod and confirm it doesn't show up as an endpoint.

func (*NetworkingTestConfig) DialFromTestContainer added in v1.5.0 

func (config *NetworkingTestConfig) DialFromTestContainer(protocol, targetIP string, targetPort, maxTries, minTries int, expectedEps sets.String)

DialFromTestContainer executes a curl via kubectl exec in a test container.

func (*NetworkingTestConfig) EndpointHostnames added in v1.5.0 

func (config *NetworkingTestConfig) EndpointHostnames() sets.String

EndpointHostnames returns a set of hostnames for existing endpoints.

func (*NetworkingTestConfig) GetEndpointsFromContainer added in v1.9.0 

func (config *NetworkingTestConfig) GetEndpointsFromContainer(protocol, containerIP, targetIP string, containerHTTPPort, targetPort, tries int) (sets.String, error)

GetEndpointsFromContainer executes a curl via kubectl exec in a test container, which might then translate to a tcp or udp request based on the protocol argument in the url. It returns all different endpoints from multiple retries.

  • tries is the number of curl attempts. If this many attempts pass and we don't see any endpoints, the test fails.

func (*NetworkingTestConfig) GetEndpointsFromTestContainer added in v1.9.0 

func (config *NetworkingTestConfig) GetEndpointsFromTestContainer(protocol, targetIP string, targetPort, tries int) (sets.String, error)

GetEndpointsFromTestContainer executes a curl via kubectl exec in a test container.

func (*NetworkingTestConfig) GetSelfURL added in v1.5.0 

func (config *NetworkingTestConfig) GetSelfURL(port int32, path string, expected string)

GetSelfURL executes a curl against the given path via kubectl exec into a test container running with host networking, and fails if the output doesn't match the expected string.

func (*NetworkingTestConfig) GetSelfURLStatusCode added in v1.8.0 

func (config *NetworkingTestConfig) GetSelfURLStatusCode(port int32, path string, expected string)

GetSelfURLStatusCode executes a curl against the given path via kubectl exec into a test container running with host networking, and fails if the returned status code doesn't match the expected string.

type NodeKiller added in v1.14.0 

type NodeKiller struct {
	// contains filtered or unexported fields
}

NodeKiller is a utility to simulate node failures.

func NewNodeKiller added in v1.14.0 

func NewNodeKiller(config NodeKillerConfig, client clientset.Interface, provider string) *NodeKiller

NewNodeKiller creates new NodeKiller.

func (*NodeKiller) Run added in v1.14.0 

func (k *NodeKiller) Run(stopCh <-chan struct{})

Run starts NodeKiller until stopCh is closed.

type NodeKillerConfig added in v1.14.0 

type NodeKillerConfig struct {
	// Enabled determines whether NodeKill should do anything at all.
	// All other options below are ignored if Enabled = false.
	Enabled bool
	// FailureRatio is a percentage of all nodes that could fail simultinously.
	FailureRatio float64
	// Interval is time between node failures.
	Interval time.Duration
	// JitterFactor is factor used to jitter node failures.
	// Node will be killed between [Interval, Interval + (1.0 + JitterFactor)].
	JitterFactor float64
	// SimulatedDowntime is a duration between node is killed and recreated.
	SimulatedDowntime time.Duration
}

NodeKillerConfig describes configuration of NodeKiller -- a utility to simulate node failures.

type NodeRuntimeOperationErrorRate 

type NodeRuntimeOperationErrorRate map[string]*RuntimeOperationErrorRate

NodeRuntimeOperationErrorRate is the runtime operation error rate on one node.

type NodeSelection added in v1.15.0 

type NodeSelection struct {
	Name     string
	Selector map[string]string
	Affinity *v1.Affinity
}

NodeSelection specifies where to run a pod, using a combination of fixed node name, node selector and/or affinity.

type NodeTestContextType added in v1.4.0 

type NodeTestContextType struct {
	// NodeE2E indicates whether it is running node e2e.
	NodeE2E bool
	// Name of the node to run tests on.
	NodeName string
	// NodeConformance indicates whether the test is running in node conformance mode.
	NodeConformance bool
	// PrepullImages indicates whether node e2e framework should prepull images.
	PrepullImages bool
	// KubeletConfig is the kubelet configuration the test is running against.
	KubeletConfig kubeletconfig.KubeletConfiguration
	// ImageDescription is the description of the image on which the test is running.
	ImageDescription string
	// SystemSpecName is the name of the system spec (e.g., gke) that's used in
	// the node e2e test. If empty, the default one (system.DefaultSpec) is
	// used. The system specs are in test/e2e_node/system/specs/.
	SystemSpecName string
	// ExtraEnvs is a map of environment names to values.
	ExtraEnvs map[string]string
}

NodeTestContextType is part of TestContextType, it is shared by all node e2e test.

type NodesCPUSummary 

type NodesCPUSummary map[string]ContainersCPUSummary

NodesCPUSummary is indexed by the node name with each entry a ContainersCPUSummary map.

type NodesSet added in v1.13.0 

type NodesSet int

NodesSet is a value of nodes set. 

const (
	// AllNodes means all containers on all nodes.
	AllNodes NodesSet = 0
	// MasterNodes means all containers on Master nodes only.
	MasterNodes NodesSet = 1
	// MasterAndDNSNodes means all containers on Master nodes and DNS containers on other nodes.
	MasterAndDNSNodes NodesSet = 2
)

type NullProvider added in v1.13.0 

type NullProvider struct{}

NullProvider is the default implementation of the ProviderInterface which doesn't do anything.

func (NullProvider) CleanupServiceResources added in v1.13.0 

func (n NullProvider) CleanupServiceResources(c clientset.Interface, loadBalancerName, region, zone string)

CleanupServiceResources is a base implementation which cleans up service resources.

func (NullProvider) CreatePD added in v1.13.0 

func (n NullProvider) CreatePD(zone string) (string, error)

CreatePD is a base implementation which creates PD.

func (NullProvider) CreatePVSource added in v1.13.0 

func (n NullProvider) CreatePVSource(zone, diskName string) (*v1.PersistentVolumeSource, error)

CreatePVSource is a base implementation which creates PV source.

func (NullProvider) DeleteNode added in v1.14.0 

func (n NullProvider) DeleteNode(node *v1.Node) error

DeleteNode is a base implementation which deletes a node.

func (NullProvider) DeletePD added in v1.13.0 

func (n NullProvider) DeletePD(pdName string) error

DeletePD is a base implementation which deletes PD.

func (NullProvider) DeletePVSource added in v1.13.0 

func (n NullProvider) DeletePVSource(pvSource *v1.PersistentVolumeSource) error

DeletePVSource is a base implementation which deletes PV source.

func (NullProvider) EnableAndDisableInternalLB added in v1.13.0 

func (n NullProvider) EnableAndDisableInternalLB() (enable, disable func(svc *v1.Service))

EnableAndDisableInternalLB is a base implementation which returns functions for enabling/disabling an internal LB.

func (NullProvider) EnsureLoadBalancerResourcesDeleted added in v1.13.0 

func (n NullProvider) EnsureLoadBalancerResourcesDeleted(ip, portRange string) error

EnsureLoadBalancerResourcesDeleted is a base implementation which ensures load balancer is deleted.

func (NullProvider) FrameworkAfterEach added in v1.13.0 

func (n NullProvider) FrameworkAfterEach(f *Framework)

FrameworkAfterEach is a base implementation which does AfterEach.

func (NullProvider) FrameworkBeforeEach added in v1.13.0 

func (n NullProvider) FrameworkBeforeEach(f *Framework)

FrameworkBeforeEach is a base implementation which does BeforeEach.

func (NullProvider) GetGroupNodes added in v1.13.0 

func (n NullProvider) GetGroupNodes(group string) ([]string, error)

GetGroupNodes is a base implementation which returns group nodes.

func (NullProvider) GroupSize added in v1.13.0 

func (n NullProvider) GroupSize(group string) (int, error)

GroupSize returns the size of an instance group

func (NullProvider) LoadBalancerSrcRanges added in v1.13.0 

func (n NullProvider) LoadBalancerSrcRanges() []string

LoadBalancerSrcRanges is a base implementation which returns the ranges of ips used by load balancers.

func (NullProvider) ResizeGroup added in v1.13.0 

func (n NullProvider) ResizeGroup(string, int32) error

ResizeGroup is a base implementation which resizes group.

type Options added in v1.15.0 

type Options struct {
	ClientQPS    float32
	ClientBurst  int
	GroupVersion *schema.GroupVersion
}

Options is a struct for managing test framework options.

type PVCMap added in v1.6.0 

type PVCMap map[types.NamespacedName]pvcval

PVCMap is a map of all PVCs used in the multi pv-pvc tests. The key is "namespace/pvc.Name". The value is {} (empty struct) since we're only interested in the PVC's name and if it is present. We must always Get the pvc object before referencing any of its values, eg. its VolumeName. Note: It's unsafe to add keys to a map in a loop. Their insertion in the map is 

unpredictable and can result in the same key being iterated over again.

type PVMap added in v1.6.0 

type PVMap map[string]pvval

PVMap is a map of all PVs used in the multi pv-pvc tests. The key is the PV's name, which is guaranteed to be unique. The value is {} (empty struct) since we're only interested in the PV's name and if it is present. We must always Get the pv object before referencing any of its values, eg its ClaimRef.

type PersistentVolumeClaimConfig added in v1.7.0 

type PersistentVolumeClaimConfig struct {
	AccessModes      []v1.PersistentVolumeAccessMode
	Annotations      map[string]string
	Selector         *metav1.LabelSelector
	StorageClassName *string
	VolumeMode       *v1.PersistentVolumeMode
}

PersistentVolumeClaimConfig is consumed by MakePersistentVolumeClaim() to generate a PVC object. AccessModes defaults to all modes (RWO, RWX, ROX) if left empty (+optional) Annotations defines the PVC's annotations

type PersistentVolumeConfig added in v1.6.0 

type PersistentVolumeConfig struct {
	PVSource         v1.PersistentVolumeSource
	Prebind          *v1.PersistentVolumeClaim
	ReclaimPolicy    v1.PersistentVolumeReclaimPolicy
	NamePrefix       string
	Labels           labels.Set
	StorageClassName string
	NodeAffinity     *v1.VolumeNodeAffinity
	VolumeMode       *v1.PersistentVolumeMode
}

PersistentVolumeConfig is consumed by MakePersistentVolume() to generate a PV object for varying storage options (NFS, ceph, glusterFS, etc.). (+optional) prebind holds a pre-bound PVC Example pvSource: 

pvSource: api.PersistentVolumeSource{
	NFS: &api.NFSVolumeSource{
 		...
 	},
 }

type PingCommand added in v1.9.0 

type PingCommand string

PingCommand is the type to hold ping command. 

const (
	// IPv4PingCommand is a ping command for IPv4.
	IPv4PingCommand PingCommand = "ping"
	// IPv6PingCommand is a ping command for IPv6.
	IPv6PingCommand PingCommand = "ping6"
)

type PodClient added in v1.4.0 

type PodClient struct {
	v1core.PodInterface
	// contains filtered or unexported fields
}

PodClient is a struct for pod client.

func (*PodClient) Create added in v1.4.0 

func (c *PodClient) Create(pod *v1.Pod) *v1.Pod

Create creates a new pod according to the framework specifications (don't wait for it to start).

func (*PodClient) CreateBatch added in v1.4.0 

func (c *PodClient) CreateBatch(pods []*v1.Pod) []*v1.Pod

CreateBatch create a batch of pods. All pods are created before waiting.

func (*PodClient) CreateEventually added in v1.13.0 

func (c *PodClient) CreateEventually(pod *v1.Pod, opts ...interface{}) *v1.Pod

CreateEventually retries pod creation for a while before failing the test with the most recent error. This mimicks the behavior of a controller (like the one for DaemonSet) and is necessary because pod creation can fail while its service account is still getting provisioned (https://github.com/kubernetes/kubernetes/issues/68776).

Both the timeout and polling interval are configurable as optional arguments: - The first optional argument is the timeout. - The second optional argument is the polling interval.

Both intervals can either be specified as time.Duration, parsable duration strings or as floats/integers. In the last case they are interpreted as seconds.

func (*PodClient) CreateSync added in v1.4.0 

func (c *PodClient) CreateSync(pod *v1.Pod) *v1.Pod

CreateSync creates a new pod according to the framework specifications, and wait for it to start.

func (*PodClient) CreateSyncInNamespace added in v1.6.0 

func (c *PodClient) CreateSyncInNamespace(pod *v1.Pod, namespace string) *v1.Pod

CreateSyncInNamespace creates a new pod according to the framework specifications in the given namespace, and waits for it to start.

func (*PodClient) DeleteSync added in v1.5.0 

func (c *PodClient) DeleteSync(name string, options *metav1.DeleteOptions, timeout time.Duration)

DeleteSync deletes the pod and wait for the pod to disappear for `timeout`. If the pod doesn't disappear before the timeout, it will fail the test.

func (*PodClient) DeleteSyncInNamespace added in v1.6.0 

func (c *PodClient) DeleteSyncInNamespace(name string, namespace string, options *metav1.DeleteOptions, timeout time.Duration)

DeleteSyncInNamespace deletes the pod from the namespace and wait for the pod to disappear for `timeout`. If the pod doesn't disappear before the timeout, it will fail the test.

func (*PodClient) MatchContainerOutput added in v1.5.0 

func (c *PodClient) MatchContainerOutput(name string, containerName string, expectedRegexp string) error

MatchContainerOutput gets output of a container and match expected regexp in the output.

func (*PodClient) PodIsReady added in v1.12.0 

func (c *PodClient) PodIsReady(name string) bool

PodIsReady returns true if the specified pod is ready. Otherwise false.

func (*PodClient) Update added in v1.4.0 

func (c *PodClient) Update(name string, updateFn func(pod *v1.Pod))

Update updates the pod object. It retries if there is a conflict, throw out error if there is any other errors. name is the pod name, updateFn is the function updating the pod object.

func (*PodClient) WaitForErrorEventOrSuccess added in v1.6.0 

func (c *PodClient) WaitForErrorEventOrSuccess(pod *v1.Pod) (*v1.Event, error)

WaitForErrorEventOrSuccess waits for pod to succeed or an error event for that pod.

func (*PodClient) WaitForFailure added in v1.8.0 

func (c *PodClient) WaitForFailure(name string, timeout time.Duration)

WaitForFailure waits for pod to fail.

func (*PodClient) WaitForFinish added in v1.15.0 

func (c *PodClient) WaitForFinish(name string, timeout time.Duration)

WaitForFinish waits for pod to finish running, regardless of success or failure.

func (*PodClient) WaitForSuccess added in v1.5.0 

func (c *PodClient) WaitForSuccess(name string, timeout time.Duration)

WaitForSuccess waits for pod to succeed. TODO(random-liu): Move pod wait function into this file

type PodLatencyData 

type PodLatencyData struct {
	// Name of the pod
	Name string
	// Node this pod was running on
	Node string
	// Latency information related to pod startuptime
	Latency time.Duration
}

PodLatencyData encapsulates pod startup latency information.

type PodNode added in v1.14.0 

type PodNode struct {
	// Pod represents pod name
	Pod string
	// Node represents node name
	Node string
}

PodNode is a pod-node pair indicating which node a given pod is running on

func PodNodePairs added in v1.14.0 

func PodNodePairs(c clientset.Interface, ns string) ([]PodNode, error)

PodNodePairs return PodNode pairs for all pods in a namespace

type PodProxyResponseChecker 

type PodProxyResponseChecker struct {
	// contains filtered or unexported fields
}

PodProxyResponseChecker is a context for checking pods responses by issuing GETs to them (via the API proxy) and verifying that they answer with their own pod name.

func NewPodProxyResponseChecker added in v1.15.0 

func NewPodProxyResponseChecker(c clientset.Interface, ns string, label labels.Selector, controllerName string, respondName bool, pods *v1.PodList) PodProxyResponseChecker

NewPodProxyResponseChecker returns a context for checking pods responses.

func (PodProxyResponseChecker) CheckAllResponses added in v1.15.0 

func (r PodProxyResponseChecker) CheckAllResponses() (done bool, err error)

CheckAllResponses issues GETs to all pods in the context and verify they reply with their own pod name.

type PodStartupLatency 

type PodStartupLatency struct {
	CreateToScheduleLatency LatencyMetric `json:"createToScheduleLatency"`
	ScheduleToRunLatency    LatencyMetric `json:"scheduleToRunLatency"`
	RunToWatchLatency       LatencyMetric `json:"runToWatchLatency"`
	ScheduleToWatchLatency  LatencyMetric `json:"scheduleToWatchLatency"`
	E2ELatency              LatencyMetric `json:"e2eLatency"`
}

PodStartupLatency is a struct for managing latency of pod startup.

func (*PodStartupLatency) PrintHumanReadable added in v1.7.0 

func (l *PodStartupLatency) PrintHumanReadable() string

PrintHumanReadable returns pod startup letency with JSON format.

func (*PodStartupLatency) PrintJSON added in v1.7.0 

func (l *PodStartupLatency) PrintJSON() string

PrintJSON returns pod startup letency with JSON format.

func (*PodStartupLatency) SummaryKind added in v1.7.0 

func (l *PodStartupLatency) SummaryKind() string

SummaryKind returns the summary of pod startup latency.

type PodStateVerification 

type PodStateVerification struct {
	// Optional: only pods that have k=v labels will pass this filter.
	Selectors map[string]string

	// Required: The phases which are valid for your pod.
	ValidPhases []v1.PodPhase

	// Optional: only pods passing this function will pass the filter
	// Verify a pod.
	// As an optimization, in addition to specifying filter (boolean),
	// this function allows specifying an error as well.
	// The error indicates that the polling of the pod spectrum should stop.
	Verify func(v1.Pod) (bool, error)

	// Optional: only pods with this name will pass the filter.
	PodName string
}

PodStateVerification represents a verification of pod state. Any time you have a set of pods that you want to operate against or query, this struct can be used to declaratively identify those pods.

type ProviderInterface added in v1.13.0 

type ProviderInterface interface {
	FrameworkBeforeEach(f *Framework)
	FrameworkAfterEach(f *Framework)

	ResizeGroup(group string, size int32) error
	GetGroupNodes(group string) ([]string, error)
	GroupSize(group string) (int, error)

	DeleteNode(node *v1.Node) error

	CreatePD(zone string) (string, error)
	DeletePD(pdName string) error
	CreatePVSource(zone, diskName string) (*v1.PersistentVolumeSource, error)
	DeletePVSource(pvSource *v1.PersistentVolumeSource) error

	CleanupServiceResources(c clientset.Interface, loadBalancerName, region, zone string)

	EnsureLoadBalancerResourcesDeleted(ip, portRange string) error
	LoadBalancerSrcRanges() []string
	EnableAndDisableInternalLB() (enable, disable func(svc *v1.Service))
}

ProviderInterface contains the implementation for certain provider-specific functionality.

func SetupProviderConfig added in v1.13.0 

func SetupProviderConfig(providerName string) (ProviderInterface, error)

SetupProviderConfig validates the chosen provider and creates an interface instance for it.

type ResourceConstraint 

type ResourceConstraint struct {
	CPUConstraint    float64
	MemoryConstraint uint64
}

ResourceConstraint is a struct to hold constraints.

type ResourceGathererOptions 

type ResourceGathererOptions struct {
	InKubemark                  bool
	Nodes                       NodesSet
	ResourceDataGatheringPeriod time.Duration
	ProbeDuration               time.Duration
	PrintVerboseLogs            bool
}

ResourceGathererOptions is a struct to hold options for resource.

type ResourceMonitor 

type ResourceMonitor struct {
	// contains filtered or unexported fields
}

ResourceMonitor manages a resourceCollector per node.

func NewResourceMonitor 

func NewResourceMonitor(c clientset.Interface, containerNames []string, pollingInterval time.Duration) *ResourceMonitor

NewResourceMonitor returns a new ResourceMonitor.

func (*ResourceMonitor) FormatCPUSummary 

func (r *ResourceMonitor) FormatCPUSummary(summary NodesCPUSummary) string

FormatCPUSummary returns the string of human-readable CPU summary from the specified summary data.

func (*ResourceMonitor) FormatResourceUsage 

func (r *ResourceMonitor) FormatResourceUsage(s ResourceUsagePerNode) string

FormatResourceUsage returns the formatted string for LogLatest(). TODO(oomichi): This can be made to local function after making test/e2e/node/kubelet_perf.go use LogLatest directly instead.

func (*ResourceMonitor) GetCPUSummary 

func (r *ResourceMonitor) GetCPUSummary() NodesCPUSummary

GetCPUSummary returns summary of CPU.

func (*ResourceMonitor) GetLatest 

func (r *ResourceMonitor) GetLatest() (ResourceUsagePerNode, error)

GetLatest returns the latest resource usage.

func (*ResourceMonitor) GetMasterNodeCPUSummary 

func (r *ResourceMonitor) GetMasterNodeCPUSummary(summaryPerNode NodesCPUSummary) NodesCPUSummary

GetMasterNodeCPUSummary returns summary of master node CPUs.

func (*ResourceMonitor) GetMasterNodeLatest 

func (r *ResourceMonitor) GetMasterNodeLatest(usagePerNode ResourceUsagePerNode) ResourceUsagePerNode

GetMasterNodeLatest returns the latest resource usage of master and node.

func (*ResourceMonitor) LogCPUSummary 

func (r *ResourceMonitor) LogCPUSummary()

LogCPUSummary outputs summary of CPU into log.

func (*ResourceMonitor) LogLatest 

func (r *ResourceMonitor) LogLatest()

LogLatest outputs the latest resource usage into log.

func (*ResourceMonitor) Reset 

func (r *ResourceMonitor) Reset()

Reset resets collectors.

func (*ResourceMonitor) Start 

func (r *ResourceMonitor) Start()

Start starts collectors.

func (*ResourceMonitor) Stop 

func (r *ResourceMonitor) Stop()

Stop stops collectors.

type ResourceUsagePerContainer 

type ResourceUsagePerContainer map[string]*ContainerResourceUsage

ResourceUsagePerContainer is map of ContainerResourceUsage

type ResourceUsagePerNode 

type ResourceUsagePerNode map[string]ResourceUsagePerContainer

ResourceUsagePerNode is map of ResourceUsagePerContainer.

type ResourceUsageSummary 

type ResourceUsageSummary map[string][]SingleContainerSummary

ResourceUsageSummary is a struct to hold resource usage summary. we can't have int here, as JSON does not accept integer keys.

func (*ResourceUsageSummary) PrintHumanReadable 

func (s *ResourceUsageSummary) PrintHumanReadable() string

PrintHumanReadable prints resource usage summary in human readable.

func (*ResourceUsageSummary) PrintJSON 

func (s *ResourceUsageSummary) PrintJSON() string

PrintJSON prints resource usage summary in JSON.

func (*ResourceUsageSummary) SummaryKind added in v1.7.0 

func (s *ResourceUsageSummary) SummaryKind() string

SummaryKind returns string of ResourceUsageSummary

type RuntimeOperationErrorRate 

type RuntimeOperationErrorRate struct {
	TotalNumber float64
	ErrorRate   float64
	TimeoutRate float64
}

RuntimeOperationErrorRate is the error rate of a specified runtime operation.

type RuntimeOperationMonitor 

type RuntimeOperationMonitor struct {
	// contains filtered or unexported fields
}

RuntimeOperationMonitor is the tool getting and parsing docker operation metrics.

func NewRuntimeOperationMonitor 

func NewRuntimeOperationMonitor(c clientset.Interface) *RuntimeOperationMonitor

NewRuntimeOperationMonitor returns a new RuntimeOperationMonitor.

func (*RuntimeOperationMonitor) GetLatestRuntimeOperationErrorRate 

func (m *RuntimeOperationMonitor) GetLatestRuntimeOperationErrorRate() map[string]NodeRuntimeOperationErrorRate

GetLatestRuntimeOperationErrorRate gets latest error rate and timeout rate from last observed RuntimeOperationErrorRate.

func (*RuntimeOperationMonitor) GetRuntimeOperationErrorRate 

func (m *RuntimeOperationMonitor) GetRuntimeOperationErrorRate() map[string]NodeRuntimeOperationErrorRate

GetRuntimeOperationErrorRate gets runtime operation records from kubelet metrics and calculate error rates of all runtime operations.

type SchedulingMetrics added in v1.11.0 

type SchedulingMetrics struct {
	PredicateEvaluationLatency  LatencyMetric `json:"predicateEvaluationLatency"`
	PriorityEvaluationLatency   LatencyMetric `json:"priorityEvaluationLatency"`
	PreemptionEvaluationLatency LatencyMetric `json:"preemptionEvaluationLatency"`
	BindingLatency              LatencyMetric `json:"bindingLatency"`
	ThroughputAverage           float64       `json:"throughputAverage"`
	ThroughputPerc50            float64       `json:"throughputPerc50"`
	ThroughputPerc90            float64       `json:"throughputPerc90"`
	ThroughputPerc99            float64       `json:"throughputPerc99"`
}

SchedulingMetrics is a struct for managing scheduling metrics.

func VerifySchedulerLatency 

func VerifySchedulerLatency(c clientset.Interface) (*SchedulingMetrics, error)

VerifySchedulerLatency verifies (currently just by logging them) the scheduling latencies.

func (*SchedulingMetrics) PrintHumanReadable added in v1.11.0 

func (l *SchedulingMetrics) PrintHumanReadable() string

PrintHumanReadable returns scheduling metrics with JSON format.

func (*SchedulingMetrics) PrintJSON added in v1.11.0 

func (l *SchedulingMetrics) PrintJSON() string

PrintJSON returns scheduling metrics with JSON format.

func (*SchedulingMetrics) SummaryKind added in v1.11.0 

func (l *SchedulingMetrics) SummaryKind() string

SummaryKind returns the summary of scheduling metrics.

type ServiceTestFixture added in v1.6.0 

type ServiceTestFixture struct {
	ServiceName string
	Namespace   string
	Client      clientset.Interface

	TestID string
	Labels map[string]string

	Name  string
	Image string
	// contains filtered or unexported fields
}

ServiceTestFixture is a simple helper class to avoid too much boilerplate in tests

func NewServerTest added in v1.6.0 

func NewServerTest(client clientset.Interface, namespace string, serviceName string) *ServiceTestFixture

NewServerTest creates a new ServiceTestFixture for the tests.

func (*ServiceTestFixture) BuildServiceSpec added in v1.6.0 

func (t *ServiceTestFixture) BuildServiceSpec() *v1.Service

BuildServiceSpec builds default config for a service (which can then be changed)

func (*ServiceTestFixture) Cleanup added in v1.6.0 

func (t *ServiceTestFixture) Cleanup() []error

Cleanup cleans all ReplicationControllers and Services which this object holds.

func (*ServiceTestFixture) CreateRC added in v1.6.0 

func (t *ServiceTestFixture) CreateRC(rc *v1.ReplicationController) (*v1.ReplicationController, error)

CreateRC creates a replication controller and records it for cleanup.

func (*ServiceTestFixture) CreateService added in v1.6.0 

func (t *ServiceTestFixture) CreateService(service *v1.Service) (*v1.Service, error)

CreateService creates a service, and record it for cleanup

func (*ServiceTestFixture) DeleteService added in v1.6.0 

func (t *ServiceTestFixture) DeleteService(serviceName string) error

DeleteService deletes a service, and remove it from the cleanup list

type ServiceTestJig added in v1.6.0 

type ServiceTestJig struct {
	ID     string
	Name   string
	Client clientset.Interface
	Labels map[string]string
}

ServiceTestJig is a test jig to help service testing.

func NewServiceTestJig added in v1.6.0 

func NewServiceTestJig(client clientset.Interface, name string) *ServiceTestJig

NewServiceTestJig allocates and inits a new ServiceTestJig.

func (*ServiceTestJig) AddRCAntiAffinity added in v1.7.0 

func (j *ServiceTestJig) AddRCAntiAffinity(rc *v1.ReplicationController)

AddRCAntiAffinity adds AntiAffinity to the given ReplicationController.

func (*ServiceTestJig) ChangeServiceNodePortOrFail added in v1.6.0 

func (j *ServiceTestJig) ChangeServiceNodePortOrFail(namespace, name string, initial int) *v1.Service

ChangeServiceNodePortOrFail changes node ports of the given service.

func (*ServiceTestJig) ChangeServiceType added in v1.6.0 

func (j *ServiceTestJig) ChangeServiceType(namespace, name string, newType v1.ServiceType, timeout time.Duration)

ChangeServiceType updates the given service's ServiceType to the given newType.

func (*ServiceTestJig) CreateExternalNameServiceOrFail added in v1.8.0 

func (j *ServiceTestJig) CreateExternalNameServiceOrFail(namespace string, tweak func(svc *v1.Service)) *v1.Service

CreateExternalNameServiceOrFail creates a new ExternalName type Service based on the jig's defaults. Callers can provide a function to tweak the Service object before it is created.

func (*ServiceTestJig) CreateLoadBalancerService added in v1.7.0 

func (j *ServiceTestJig) CreateLoadBalancerService(namespace, serviceName string, timeout time.Duration, tweak func(svc *v1.Service)) *v1.Service

CreateLoadBalancerService creates a loadbalancer service and waits for it to acquire an ingress IP.

func (*ServiceTestJig) CreateOnlyLocalLoadBalancerService added in v1.6.0 

func (j *ServiceTestJig) CreateOnlyLocalLoadBalancerService(namespace, serviceName string, timeout time.Duration, createPod bool,
	tweak func(svc *v1.Service)) *v1.Service

CreateOnlyLocalLoadBalancerService creates a loadbalancer service with ExternalTrafficPolicy set to Local and waits for it to acquire an ingress IP. If createPod is true, it also creates an RC with 1 replica of the standard netexec container used everywhere in this test.

func (*ServiceTestJig) CreateOnlyLocalNodePortService added in v1.6.0 

func (j *ServiceTestJig) CreateOnlyLocalNodePortService(namespace, serviceName string, createPod bool) *v1.Service

CreateOnlyLocalNodePortService creates a NodePort service with ExternalTrafficPolicy set to Local and sanity checks its nodePort. If createPod is true, it also creates an RC with 1 replica of the standard netexec container used everywhere in this test.

func (*ServiceTestJig) CreatePDBOrFail added in v1.7.0 

func (j *ServiceTestJig) CreatePDBOrFail(namespace string, rc *v1.ReplicationController) *policyv1beta1.PodDisruptionBudget

CreatePDBOrFail returns a PodDisruptionBudget for the given ReplicationController, or fails if a PodDisruptionBudget isn't ready

func (*ServiceTestJig) CreateServiceWithServicePort added in v1.11.0 

func (j *ServiceTestJig) CreateServiceWithServicePort(labels map[string]string, namespace string, ports []v1.ServicePort) (*v1.Service, error)

CreateServiceWithServicePort creates a new Service with ServicePort.

func (*ServiceTestJig) CreateTCPServiceOrFail added in v1.6.0 

func (j *ServiceTestJig) CreateTCPServiceOrFail(namespace string, tweak func(svc *v1.Service)) *v1.Service

CreateTCPServiceOrFail creates a new TCP Service based on the jig's defaults. Callers can provide a function to tweak the Service object before it is created.

func (*ServiceTestJig) CreateTCPServiceWithPort added in v1.6.0 

func (j *ServiceTestJig) CreateTCPServiceWithPort(namespace string, tweak func(svc *v1.Service), port int32) *v1.Service

CreateTCPServiceWithPort creates a new TCP Service with given port based on the jig's defaults. Callers can provide a function to tweak the Service object before it is created.

func (*ServiceTestJig) CreateUDPServiceOrFail added in v1.6.0 

func (j *ServiceTestJig) CreateUDPServiceOrFail(namespace string, tweak func(svc *v1.Service)) *v1.Service

CreateUDPServiceOrFail creates a new UDP Service based on the jig's defaults. Callers can provide a function to tweak the Service object before it is created.

func (*ServiceTestJig) GetEndpointNodes added in v1.6.0 

func (j *ServiceTestJig) GetEndpointNodes(svc *v1.Service) map[string][]string

GetEndpointNodes returns a map of nodenames:external-ip on which the endpoints of the given Service are running.

func (*ServiceTestJig) GetHTTPContent added in v1.6.0 

func (j *ServiceTestJig) GetHTTPContent(host string, port int, timeout time.Duration, url string) bytes.Buffer

GetHTTPContent returns the content of the given url by HTTP.

func (*ServiceTestJig) GetNodes added in v1.6.0 

func (j *ServiceTestJig) GetNodes(maxNodesForTest int) (nodes *v1.NodeList)

GetNodes returns the first maxNodesForTest nodes. Useful in large clusters where we don't eg: want to create an endpoint per node.

func (*ServiceTestJig) GetNodesNames added in v1.6.0 

func (j *ServiceTestJig) GetNodesNames(maxNodesForTest int) []string

GetNodesNames returns a list of names of the first maxNodesForTest nodes

func (*ServiceTestJig) LaunchEchoserverPodOnNode added in v1.6.0 

func (j *ServiceTestJig) LaunchEchoserverPodOnNode(f *Framework, nodeName, podName string)

LaunchEchoserverPodOnNode launches a pod serving http on port 8080 to act as the target for source IP preservation test. The client's source ip would be echoed back by the web server.

func (*ServiceTestJig) LaunchNetexecPodOnNode added in v1.6.0 

func (j *ServiceTestJig) LaunchNetexecPodOnNode(f *Framework, nodeName, podName string, httpPort, udpPort int32, hostNetwork bool)

LaunchNetexecPodOnNode launches a netexec pod on the given node.

func (*ServiceTestJig) RunOrFail added in v1.6.0 

func (j *ServiceTestJig) RunOrFail(namespace string, tweak func(rc *v1.ReplicationController)) *v1.ReplicationController

RunOrFail creates a ReplicationController and Pod(s) and waits for the Pod(s) to be running. Callers can provide a function to tweak the RC object before it is created.

func (*ServiceTestJig) SanityCheckService added in v1.6.0 

func (j *ServiceTestJig) SanityCheckService(svc *v1.Service, svcType v1.ServiceType)

SanityCheckService performs sanity checks on the given service

func (*ServiceTestJig) Scale added in v1.13.6 

func (j *ServiceTestJig) Scale(namespace string, replicas int)

Scale scales pods to the given replicas

func (*ServiceTestJig) TestHTTPHealthCheckNodePort added in v1.6.0 

func (j *ServiceTestJig) TestHTTPHealthCheckNodePort(host string, port int, request string, timeout time.Duration, expectSucceed bool, threshold int) error

TestHTTPHealthCheckNodePort tests a HTTP connection by the given request to the given host and port.

func (*ServiceTestJig) TestNotReachableHTTP added in v1.6.0 

func (j *ServiceTestJig) TestNotReachableHTTP(host string, port int, timeout time.Duration)

TestNotReachableHTTP tests that a HTTP request doesn't connect to the given host and port.

func (*ServiceTestJig) TestNotReachableUDP added in v1.6.0 

func (j *ServiceTestJig) TestNotReachableUDP(host string, port int, timeout time.Duration)

TestNotReachableUDP tests that the given host doesn't serve UDP on the given port.

func (*ServiceTestJig) TestReachableHTTP added in v1.6.0 

func (j *ServiceTestJig) TestReachableHTTP(host string, port int, timeout time.Duration)

TestReachableHTTP tests that the given host serves HTTP on the given port.

func (*ServiceTestJig) TestReachableHTTPWithRetriableErrorCodes added in v1.8.0 

func (j *ServiceTestJig) TestReachableHTTPWithRetriableErrorCodes(host string, port int, retriableErrCodes []int, timeout time.Duration)

TestReachableHTTPWithRetriableErrorCodes tests that the given host serves HTTP on the given port with the given retriableErrCodes.

func (*ServiceTestJig) TestReachableUDP added in v1.6.0 

func (j *ServiceTestJig) TestReachableUDP(host string, port int, timeout time.Duration)

TestReachableUDP tests that the given host serves UDP on the given port.

func (*ServiceTestJig) TestRejectedHTTP added in v1.13.6 

func (j *ServiceTestJig) TestRejectedHTTP(host string, port int, timeout time.Duration)

TestRejectedHTTP tests that the given host rejects a HTTP request on the given port.

func (*ServiceTestJig) TestRejectedUDP added in v1.13.6 

func (j *ServiceTestJig) TestRejectedUDP(host string, port int, timeout time.Duration)

TestRejectedUDP tests that the given host rejects a UDP request on the given port.

func (*ServiceTestJig) UpdateService added in v1.6.0 

func (j *ServiceTestJig) UpdateService(namespace, name string, update func(*v1.Service)) (*v1.Service, error)

UpdateService fetches a service, calls the update function on it, and then attempts to send the updated service. It tries up to 3 times in the face of timeouts and conflicts.

func (*ServiceTestJig) UpdateServiceOrFail added in v1.6.0 

func (j *ServiceTestJig) UpdateServiceOrFail(namespace, name string, update func(*v1.Service)) *v1.Service

UpdateServiceOrFail fetches a service, calls the update function on it, and then attempts to send the updated service. It tries up to 3 times in the face of timeouts and conflicts.

func (*ServiceTestJig) WaitForEndpointOnNode added in v1.6.0 

func (j *ServiceTestJig) WaitForEndpointOnNode(namespace, serviceName, nodeName string)

WaitForEndpointOnNode waits for a service endpoint on the given node.

func (*ServiceTestJig) WaitForLoadBalancerDestroyOrFail added in v1.6.0 

func (j *ServiceTestJig) WaitForLoadBalancerDestroyOrFail(namespace, name string, ip string, port int, timeout time.Duration) *v1.Service

WaitForLoadBalancerDestroyOrFail waits the given service to destroy a LoadBalancer, or fails after the given timeout

func (*ServiceTestJig) WaitForLoadBalancerOrFail added in v1.6.0 

func (j *ServiceTestJig) WaitForLoadBalancerOrFail(namespace, name string, timeout time.Duration) *v1.Service

WaitForLoadBalancerOrFail waits the given service to have a LoadBalancer, or fails after the given timeout

func (*ServiceTestJig) WaitForNewIngressIPOrFail added in v1.8.0 

func (j *ServiceTestJig) WaitForNewIngressIPOrFail(namespace, name, existingIP string, timeout time.Duration) *v1.Service

WaitForNewIngressIPOrFail waits for the given service to get a new ingress IP, or fails after the given timeout

type SingleContainerSummary 

type SingleContainerSummary struct {
	Name string
	CPU  float64
	Mem  uint64
}

SingleContainerSummary is a struct to hold single container summary.

type SingleLogSummary 

type SingleLogSummary struct {
	AverageGenerationRate int
	NumberOfProbes        int
}

SingleLogSummary is a structure for handling average generation rate and number of probes.

type StatefulSetTester added in v1.6.0 

type StatefulSetTester struct {
	// contains filtered or unexported fields
}

StatefulSetTester is a struct that contains utility methods for testing StatefulSet related functionality. It uses a clientset.Interface to communicate with the API server.

func NewStatefulSetTester added in v1.6.0 

func NewStatefulSetTester(c clientset.Interface) *StatefulSetTester

NewStatefulSetTester creates a StatefulSetTester that uses c to interact with the API server.

func (*StatefulSetTester) BreakHTTPProbe added in v1.15.0 

func (s *StatefulSetTester) BreakHTTPProbe(ss *apps.StatefulSet) error

BreakHTTPProbe breaks the readiness probe for Nginx StatefulSet containers in ss.

func (*StatefulSetTester) BreakPodHTTPProbe added in v1.15.0 

func (s *StatefulSetTester) BreakPodHTTPProbe(ss *apps.StatefulSet, pod *v1.Pod) error

BreakPodHTTPProbe breaks the readiness probe for Nginx StatefulSet containers in one pod.

func (*StatefulSetTester) CheckHostname added in v1.6.0 

func (s *StatefulSetTester) CheckHostname(ss *apps.StatefulSet) error

CheckHostname verifies that all Pods in ss have the correct Hostname. If the returned error is not nil than verification failed.

func (*StatefulSetTester) CheckMount added in v1.6.0 

func (s *StatefulSetTester) CheckMount(ss *apps.StatefulSet, mountPath string) error

CheckMount checks that the mount at mountPath is valid for all Pods in ss.

func (*StatefulSetTester) CheckServiceName added in v1.6.0 

func (s *StatefulSetTester) CheckServiceName(ss *apps.StatefulSet, expectedServiceName string) error

CheckServiceName asserts that the ServiceName for ss is equivalent to expectedServiceName.

func (*StatefulSetTester) ConfirmStatefulPodCount added in v1.6.0 

func (s *StatefulSetTester) ConfirmStatefulPodCount(count int, ss *apps.StatefulSet, timeout time.Duration, hard bool)

ConfirmStatefulPodCount asserts that the current number of Pods in ss is count waiting up to timeout for ss to to scale to count.

func (*StatefulSetTester) CreateStatefulSet added in v1.6.0 

func (s *StatefulSetTester) CreateStatefulSet(manifestPath, ns string) *apps.StatefulSet

CreateStatefulSet creates a StatefulSet from the manifest at manifestPath in the Namespace ns using kubectl create.

func (*StatefulSetTester) DeleteStatefulPodAtIndex added in v1.6.0 

func (s *StatefulSetTester) DeleteStatefulPodAtIndex(index int, ss *apps.StatefulSet)

DeleteStatefulPodAtIndex deletes the Pod with ordinal index in ss.

func (*StatefulSetTester) ExecInStatefulPods added in v1.6.0 

func (s *StatefulSetTester) ExecInStatefulPods(ss *apps.StatefulSet, cmd string) error

ExecInStatefulPods executes cmd in all Pods in ss. If a error occurs it is returned and cmd is not execute in any subsequent Pods.

func (*StatefulSetTester) GetPodList added in v1.6.0 

func (s *StatefulSetTester) GetPodList(ss *apps.StatefulSet) *v1.PodList

GetPodList gets the current Pods in ss.

func (*StatefulSetTester) GetStatefulSet added in v1.7.0 

func (s *StatefulSetTester) GetStatefulSet(namespace, name string) *apps.StatefulSet

GetStatefulSet gets the StatefulSet named name in namespace.

func (*StatefulSetTester) PauseNewPods added in v1.7.3 

func (s *StatefulSetTester) PauseNewPods(ss *apps.StatefulSet)

PauseNewPods adds an always-failing ReadinessProbe to the StatefulSet PodTemplate. This causes all newly-created Pods to stay Unready until they are manually resumed with ResumeNextPod(). Note that this cannot be used together with SetHTTPProbe().

func (*StatefulSetTester) Restart added in v1.6.0 

func (s *StatefulSetTester) Restart(ss *apps.StatefulSet)

Restart scales ss to 0 and then back to its previous number of replicas.

func (*StatefulSetTester) RestoreHTTPProbe added in v1.15.0 

func (s *StatefulSetTester) RestoreHTTPProbe(ss *apps.StatefulSet) error

RestoreHTTPProbe restores the readiness probe for Nginx StatefulSet containers in ss.

func (*StatefulSetTester) RestorePodHTTPProbe added in v1.15.0 

func (s *StatefulSetTester) RestorePodHTTPProbe(ss *apps.StatefulSet, pod *v1.Pod) error

RestorePodHTTPProbe restores the readiness probe for Nginx StatefulSet containers in pod.

func (*StatefulSetTester) ResumeNextPod added in v1.7.3 

func (s *StatefulSetTester) ResumeNextPod(ss *apps.StatefulSet)

ResumeNextPod allows the next Pod in the StatefulSet to continue by removing the ReadinessProbe added by PauseNewPods(), if it's still there. It fails the test if it finds any pods that are not in phase Running, or if it finds more than one paused Pod existing at the same time. This is a no-op if there are no paused pods.

func (*StatefulSetTester) Saturate added in v1.6.0 

func (s *StatefulSetTester) Saturate(ss *apps.StatefulSet)

Saturate waits for all Pods in ss to become Running and Ready.

func (*StatefulSetTester) Scale added in v1.6.0 

func (s *StatefulSetTester) Scale(ss *apps.StatefulSet, count int32) (*apps.StatefulSet, error)

Scale scales ss to count replicas.

func (*StatefulSetTester) SetHTTPProbe added in v1.15.0 

func (s *StatefulSetTester) SetHTTPProbe(ss *apps.StatefulSet)

SetHTTPProbe sets the pod template's ReadinessProbe for Nginx StatefulSet containers. This probe can then be controlled with BreakHTTPProbe() and RestoreHTTPProbe(). Note that this cannot be used together with PauseNewPods().

func (*StatefulSetTester) SortStatefulPods added in v1.7.0 

func (s *StatefulSetTester) SortStatefulPods(pods *v1.PodList)

SortStatefulPods sorts pods by their ordinals

func (*StatefulSetTester) UpdateReplicas added in v1.6.0 

func (s *StatefulSetTester) UpdateReplicas(ss *apps.StatefulSet, count int32)

UpdateReplicas updates the replicas of ss to count.

func (*StatefulSetTester) VerifyPodAtIndex added in v1.6.0 

func (s *StatefulSetTester) VerifyPodAtIndex(index int, ss *apps.StatefulSet, verify VerifyStatefulPodFunc)

VerifyPodAtIndex applies a visitor patter to the Pod at index in ss. verify is applied to the Pod to "visit" it.

func (*StatefulSetTester) WaitForPartitionedRollingUpdate added in v1.7.0 

func (s *StatefulSetTester) WaitForPartitionedRollingUpdate(set *apps.StatefulSet) (*apps.StatefulSet, *v1.PodList)

WaitForPartitionedRollingUpdate waits for all Pods in set to exist and have the correct revision. set must have a RollingUpdateStatefulSetStrategyType with a non-nil RollingUpdate and Partition. All Pods with ordinals less than or equal to the Partition are expected to be at set's current revision. All other Pods are expected to be at its update revision.

func (*StatefulSetTester) WaitForPodNotReady added in v1.7.0 

func (s *StatefulSetTester) WaitForPodNotReady(set *apps.StatefulSet, podName string) (*apps.StatefulSet, *v1.PodList)

WaitForPodNotReady waist for the Pod named podName in set to exist and to not have a Ready condition.

func (*StatefulSetTester) WaitForPodReady added in v1.7.0 

func (s *StatefulSetTester) WaitForPodReady(set *apps.StatefulSet, podName string) (*apps.StatefulSet, *v1.PodList)

WaitForPodReady waits for the Pod named podName in set to exist and have a Ready condition.

func (*StatefulSetTester) WaitForRollingUpdate added in v1.7.0 

func (s *StatefulSetTester) WaitForRollingUpdate(set *apps.StatefulSet) (*apps.StatefulSet, *v1.PodList)

WaitForRollingUpdate waits for all Pods in set to exist and have the correct revision and for the RollingUpdate to complete. set must have a RollingUpdateStatefulSetStrategyType.

func (*StatefulSetTester) WaitForRunning added in v1.7.3 

func (s *StatefulSetTester) WaitForRunning(numPodsRunning, numPodsReady int32, ss *apps.StatefulSet)

WaitForRunning waits for numPodsRunning in ss to be Running and for the first numPodsReady ordinals to be Ready.

func (*StatefulSetTester) WaitForRunningAndNotReady added in v1.6.0 

func (s *StatefulSetTester) WaitForRunningAndNotReady(numStatefulPods int32, ss *apps.StatefulSet)

WaitForRunningAndNotReady waits for numStatefulPods in ss to be Running and not Ready.

func (*StatefulSetTester) WaitForRunningAndReady added in v1.6.0 

func (s *StatefulSetTester) WaitForRunningAndReady(numStatefulPods int32, ss *apps.StatefulSet)

WaitForRunningAndReady waits for numStatefulPods in ss to be Running and Ready.

func (*StatefulSetTester) WaitForState added in v1.7.0 

func (s *StatefulSetTester) WaitForState(ss *apps.StatefulSet, until func(*apps.StatefulSet, *v1.PodList) (bool, error))

WaitForState periodically polls for the ss and its pods until the until function returns either true or an error

func (*StatefulSetTester) WaitForStatus added in v1.6.0 

func (s *StatefulSetTester) WaitForStatus(set *apps.StatefulSet) *apps.StatefulSet

WaitForStatus waits for the StatefulSetStatus's ObservedGeneration to be greater than or equal to set's Generation. The returned StatefulSet contains such a StatefulSetStatus

func (*StatefulSetTester) WaitForStatusReadyReplicas added in v1.7.0 

func (s *StatefulSetTester) WaitForStatusReadyReplicas(ss *apps.StatefulSet, expectedReplicas int32)

WaitForStatusReadyReplicas waits for the ss.Status.ReadyReplicas to be equal to expectedReplicas

func (*StatefulSetTester) WaitForStatusReplicas added in v1.7.0 

func (s *StatefulSetTester) WaitForStatusReplicas(ss *apps.StatefulSet, expectedReplicas int32)

WaitForStatusReplicas waits for the ss.Status.Replicas to be equal to expectedReplicas

type TestContextType 

type TestContextType struct {
	KubeConfig         string
	KubeContext        string
	KubeAPIContentType string
	KubeVolumeDir      string
	CertDir            string
	Host               string
	// TODO: Deprecating this over time... instead just use gobindata_util.go , see #23987.
	RepoRoot                string
	DockershimCheckpointDir string
	// ListImages will list off all images that are used then quit
	ListImages bool

	// Provider identifies the infrastructure provider (gce, gke, aws)
	Provider string

	// Tooling is the tooling in use (e.g. kops, gke).  Provider is the cloud provider and might not uniquely identify the tooling.
	Tooling string

	CloudConfig    CloudConfig
	KubectlPath    string
	OutputDir      string
	ReportDir      string
	ReportPrefix   string
	Prefix         string
	MinStartupPods int
	// Timeout for waiting for system pods to be running
	SystemPodsStartupTimeout    time.Duration
	EtcdUpgradeStorage          string
	EtcdUpgradeVersion          string
	GCEUpgradeScript            string
	ContainerRuntime            string
	ContainerRuntimeEndpoint    string
	ContainerRuntimeProcessName string
	ContainerRuntimePidFile     string
	// SystemdServices are comma separated list of systemd services the test framework
	// will dump logs for.
	SystemdServices string
	// DumpSystemdJournal controls whether to dump the full systemd journal.
	DumpSystemdJournal       bool
	ImageServiceEndpoint     string
	MasterOSDistro           string
	NodeOSDistro             string
	VerifyServiceAccount     bool
	DeleteNamespace          bool
	DeleteNamespaceOnFailure bool
	AllowedNotReadyNodes     int
	CleanStart               bool
	// If set to 'true' or 'all' framework will start a goroutine monitoring resource usage of system add-ons.
	// It will read the data every 30 seconds from all Nodes and print summary during afterEach. If set to 'master'
	// only master Node will be monitored.
	GatherKubeSystemResourceUsageData string
	GatherLogsSizes                   bool
	GatherMetricsAfterTest            string
	GatherSuiteMetricsAfterTest       bool
	MaxNodesToGather                  int
	AllowGatheringProfiles            bool
	// If set to 'true' framework will gather ClusterAutoscaler metrics when gathering them for other components.
	IncludeClusterAutoscalerMetrics bool
	// Currently supported values are 'hr' for human-readable and 'json'. It's a comma separated list.
	OutputPrintType string
	// NodeSchedulableTimeout is the timeout for waiting for all nodes to be schedulable.
	NodeSchedulableTimeout time.Duration
	// SystemDaemonsetStartupTimeout is the timeout for waiting for all system daemonsets to be ready.
	SystemDaemonsetStartupTimeout time.Duration
	// CreateTestingNS is responsible for creating namespace used for executing e2e tests.
	// It accepts namespace base name, which will be prepended with e2e prefix, kube client
	// and labels to be applied to a namespace.
	CreateTestingNS CreateTestingNSFn
	// If set to true test will dump data about the namespace in which test was running.
	DumpLogsOnFailure bool
	// Disables dumping cluster log from master and nodes after all tests.
	DisableLogDump bool
	// Path to the GCS artifacts directory to dump logs from nodes. Logexporter gets enabled if this is non-empty.
	LogexporterGCSPath string
	// featureGates is a map of feature names to bools that enable or disable alpha/experimental features.
	FeatureGates map[string]bool
	// Node e2e specific test context
	NodeTestContextType
	// Monitoring solution that is used in current cluster.
	ClusterMonitoringMode string
	// Separate Prometheus monitoring deployed in cluster
	EnablePrometheusMonitoring bool

	// Indicates what path the kubernetes-anywhere is installed on
	KubernetesAnywherePath string

	// The DNS Domain of the cluster.
	ClusterDNSDomain string

	// The configration of NodeKiller.
	NodeKiller NodeKillerConfig
}

TestContextType contains test settings and global state. Due to historic reasons, it is a mixture of items managed by the test framework itself, cloud providers and individual tests. The goal is to move anything not required by the framework into the code which uses the settings.

The recommendation for those settings is:

  • They are stored in their own context structure or local variables.
  • The standard `flag` package is used to register them. The flag name should follow the pattern <part1>.<part2>....<partn> where the prefix is unlikely to conflict with other tests or standard packages and each part is in lower camel case. For example, test/e2e/storage/csi/context.go could define storage.csi.numIterations.
  • framework/config can be used to simplify the registration of multiple options with a single function call: var storageCSI { NumIterations `default:"1" usage:"number of iterations"` } _ config.AddOptions(&storageCSI, "storage.csi")
  • The direct use Viper in tests is possible, but discouraged because it only works in test suites which use Viper (which is not required) and the supported options cannot be discovered by a test suite user.

Test suite authors can use framework/viper to make all command line parameters also configurable via a configuration file. 

var TestContext TestContextType

TestContext should be used by all tests to access common context data.

type TestDataSummary 

type TestDataSummary interface {
	SummaryKind() string
	PrintHumanReadable() string
	PrintJSON() string
}

TestDataSummary is an interface for managing test data.

type TimestampedSize 

type TimestampedSize struct {
	// contains filtered or unexported fields
}

TimestampedSize contains a size together with a time of measurement.

type UDPPokeParams added in v1.13.6 

type UDPPokeParams struct {
	Timeout  time.Duration
	Response string
}

UDPPokeParams is a struct for UDP poke parameters.

type UDPPokeResult added in v1.13.6 

type UDPPokeResult struct {
	Status   UDPPokeStatus
	Error    error  // if there was any error
	Response []byte // if code != 0
}

UDPPokeResult is a struct for UDP poke result.

func PokeUDP added in v1.13.6 

func PokeUDP(host string, port int, request string, params *UDPPokeParams) UDPPokeResult

PokeUDP tries to connect to a host on a port and send the given request. Callers can specify additional success parameters, if desired.

The result status will be characterized as precisely as possible, given the known users of this.

The result error will be populated for any status other than Success.

The result response will be populated if the UDP transaction was completed, even if the other test params make this a failure).

type UDPPokeStatus added in v1.13.6 

type UDPPokeStatus string

UDPPokeStatus is string for representing UDP poke status. 

const (
	// UDPSuccess is UDP poke status which is success.
	UDPSuccess UDPPokeStatus = "Success"
	// UDPError is UDP poke status which is error.
	UDPError UDPPokeStatus = "UnknownError"
	// UDPTimeout is UDP poke status which is timeout.
	UDPTimeout UDPPokeStatus = "TimedOut"
	// UDPRefused is UDP poke status which is connection refused.
	UDPRefused UDPPokeStatus = "ConnectionRefused"
	// UDPBadResponse is UDP poke status which is bad response.
	UDPBadResponse UDPPokeStatus = "BadResponse"
)

type VerifyStatefulPodFunc added in v1.6.0 

type VerifyStatefulPodFunc func(*v1.Pod)

VerifyStatefulPodFunc is a func that examines a StatefulSetPod.

type What added in v1.13.0 

type What struct {
	Kind string `json:"kind"`
}

What is a subset of metav1.TypeMeta which (in contrast to metav1.TypeMeta itself) satisfies the runtime.Object interface.

func (*What) DeepCopy added in v1.13.0 

func (in *What) DeepCopy() *What

DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new What.

func (*What) DeepCopyInto added in v1.13.0 

func (in *What) DeepCopyInto(out *What)

DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out.

func (*What) DeepCopyObject added in v1.13.0 

func (in *What) DeepCopyObject() runtime.Object

DeepCopyObject is an autogenerated deepcopy function, copying the receiver, creating a new runtime.Object.

func (*What) GetObjectKind added in v1.13.0 

func (in *What) GetObjectKind() schema.ObjectKind

GetObjectKind returns the ObjectKind schema

type WorkItem 

type WorkItem struct {
	// contains filtered or unexported fields
}

WorkItem is a command for a worker that contains an IP of machine from which we want to gather data and paths to all files we're interested in.

Source Files

View all Source files

Directories

Path Synopsis
Package config simplifies the declaration of configuration options.
 Package config simplifies the declaration of configuration options.
Package ginkgowrapper wraps Ginkgo Fail and Skip functions to panic with structured data instead of a constant string.
 Package ginkgowrapper wraps Ginkgo Fail and Skip functions to panic with structured data instead of a constant string.
Package podlogs enables live capturing of all events and log messages for some or all pods in a namespace as they get generated.
 Package podlogs enables live capturing of all events and log messages for some or all pods in a namespace as they get generated.
providers
aws
azure
gce
kubemark
openstack
vsphere
Package testfiles provides a wrapper around various optional ways of retrieving additional files needed during a test run: - builtin bindata - filesystem access Because it is a is self-contained package, it can be used by test/e2e/framework and test/e2e/manifest without creating a circular dependency.
 Package testfiles provides a wrapper around various optional ways of retrieving additional files needed during a test run: - builtin bindata - filesystem access Because it is a is self-contained package, it can be used by test/e2e/framework and test/e2e/manifest without creating a circular dependency.

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.