oci

README

Oracle Cloud Infrastructure Golang SDK

This is the Go SDK for Oracle Cloud Infrastructure. This project is open source and maintained by Oracle Corp. The home page for the project is here.

Survey

Are you a Developer using the OCI SDK? If so, please fill out our survey to help us make the OCI SDK better for you. Click here for the survey page.

Dependencies

• Install Go programming language, Go1.14, 1.15, 1.16, 1.17 and 1.18 is supported By OCI Go SDK.
• Install GNU Make, using the package manager or binary distribution tool appropriate for your platform.

Versioning

• The breaking changes in service client APIs will no longer result in a major version bump (x+1.y.z relative to the last published version). Instead, we will bump the minor version of the SDK (x.y+1.z relative to the last published version).
• If there are no breaking changes in a release, we will bump the patch version of the SDK (x.y.z+1 relative to the last published version). We will continue to announce any breaking changes in a new version under the Breaking Changes section in the release changelog and on the Github release page [https://github.com/oracle/oci-go-sdk/releases].
• However, breaking changes in the SDK's common module will continue to result in a major version bump (x+1.y.z relative to the last published version). That said, we'll continue to maintain backward compatibility as much as possible to minimize the effort involved in upgrading the SDK version used by your code.

Installing

If you want to install the SDK under $GOPATH, you can use go get to retrieve the SDK:

go get -u github.com/oracle/oci-go-sdk

If you are using Go modules, you can install by running the following command within a folder containing a go.mod file:

go get -d github.com/oracle/oci-go-sdk/v49@latest

The latest major version (for example v49) can be identified on the Github releases page.

Alternatively, you can install a specific version (supported from v25.0.0 on):

go get -d github.com/oracle/oci-go-sdk/v49@v49.1.0

Run go mod tidy

In your project, you also need to ensure the import paths contain the correct major-version:

import "github.com/oracle/oci-go-sdk/v49/common"  // or whatever major version you're using

Working with the Go SDK

To start working with the Go SDK, you import the service package, create a client, and then use that client to make calls.

Configuring

Before using the SDK, set up a config file with the required credentials. See SDK and Tool Configuration for instructions.

Note that the Go SDK does not support profile inheritance or defining custom values in the configuration file.

Once a config file has been setup, call common.DefaultConfigProvider() function as follows:

// Import necessary packages
import (
   "github.com/oracle/oci-go-sdk/v49/common"
   "github.com/oracle/oci-go-sdk/v49/identity" // Identity or any other service you wish to make requests to
)

//...

configProvider := common.DefaultConfigProvider()

Or, to configure the SDK programmatically instead, implement the ConfigurationProvider interface shown below:

// ConfigurationProvider wraps information about the account owner
type ConfigurationProvider interface {
   KeyProvider
   TenancyOCID() (string, error)
   UserOCID() (string, error)
   KeyFingerprint() (string, error)
   Region() (string, error)
   // AuthType() is used for specify the needed auth type, like UserPrincipal, InstancePrincipal, etc. AuthConfig is used for getting auth related paras in config file.
   AuthType() (AuthConfig, error)
}

Or simply use one of structs exposed by the oci-go-sdk that already implement the above interface

Making a Request

To make a request to an Oracle Cloud Infrastructure service, create a client for the service and then use the client to call a function from the service.

• Creating a client: All packages provide a function to create clients, using the naming convention New<ServiceName>ClientWithConfigurationProvider, such as NewVirtualNetworkClientWithConfigurationProvider or NewIdentityClientWithConfigurationProvider. To create a new client, pass a struct that conforms to the ConfigurationProvider interface, or use the DefaultConfigProvider() function in the common package.

For example:

config := common.DefaultConfigProvider()
client, err := identity.NewIdentityClientWithConfigurationProvider(config)
if err != nil { 
     panic(err)
}

• Making calls: After successfully creating a client, requests can now be made to the service. Generally all functions associated with an operation accept context.Context and a struct that wraps all input parameters. The functions then return a response struct that contains the desired data, and an error struct that describes the error if an error occurs.

For example:

id := "your_group_id"
response, err := client.GetGroup(context.Background(), identity.GetGroupRequest{GroupId:&id})
if err != nil {
	//Something happened
	panic(err)
}
//Process the data in response struct
fmt.Println("Group's name is:", response.Name)

• Expect header: Some services specified "PUT/POST" requests add Expect 100-continue header by default, if it is not expected, please explicitly set the env var:

export OCI_GOSDK_USING_EXPECT_HEADER=FALSE

• Circuit Breaker: By default, circuit breaker feature is enabled, if it is not expected, please explicitly set the env var:

export OCI_SDK_DEFAULT_CIRCUITBREAKER_ENABLED=FALSE

• Cicuit Breaker: Circuit Breaker error message includes a set of previous failed responses. By default, the number of the failed responses is set to 5. It can be explicitly set using the env var:

export OCI_SDK_CIRCUITBREAKER_NUM_HISTORY_RESPONSE=<int value>

Organization of the SDK

The oci-go-sdk contains the following:

• Service packages: All packages except common and any other package found inside cmd. These packages represent the Oracle Cloud Infrastructure services supported by the Go SDK. Each package represents a service. These packages include methods to interact with the service, structs that model input and output parameters, and a client struct that acts as receiver for the above methods.

• Common package: Found in the common directory. The common package provides supporting functions and structs used by service packages. Includes HTTP request/response (de)serialization, request signing, JSON parsing, pointer to reference and other helper functions. Most of the functions in this package are meant to be used by the service packages.

• cmd: Internal tools used by the oci-go-sdk.

Examples

Examples can be found here

Documentation

Full documentation can be found on the godocs site.

Help

• The Issues page of this GitHub repository.
• Stack Overflow, use the oracle-cloud-infrastructure and oci-go-sdk tags in your post.
• Developer Tools of the Oracle Cloud forums.
• My Oracle Support.

Contributing

oci-go-sdk is an open source project. See CONTRIBUTING for details.

Oracle gratefully acknowledges the contributions to oci-go-sdk that have been made by the community.

License

Copyright (c) 2016, 2018, 2021, Oracle and/or its affiliates. All rights reserved. This software is dual-licensed to you under the Universal Permissive License (UPL) 1.0 as shown at https://oss.oracle.com/licenses/upl or Apache License 2.0 as shown at http://www.apache.org/licenses/LICENSE-2.0. You may choose either license.

See LICENSE for more details.

Changes

See CHANGELOG.

Known Issues

You can find information on any known issues with the SDK here and under the Issues tab of this project's GitHub repository.

Building and Testing

Dev Dependencies

For Go versions below 1.17

• Install Testify with the command:

go get github.com/stretchr/testify

• Install gobreaker with the command:

go get github.com/sony/gobreaker

• Install flock with the command:

go get github.com/gofrs/flock

• Install go lint with the command:

go get -u golang.org/x/lint/golint

For Go versions 1.17 and above

• Install Testify with the command:

go install github.com/stretchr/testify

• Install gobreaker with the command:

go install github.com/sony/gobreaker

• Install flock with the command:

go install github.com/gofrs/flock

• Install go lint with the command:

go install github.com/golang/lint/golint

Build

Building is provided by the make file at the root of the project. To build the project execute.

make build

To run the tests:

make test

Documentation

Overview

Package oci is the official Go SDK for Oracle Cloud Infrastructure

Installation

Refer to https://github.com/oracle/oci-go-sdk/blob/master/README.md#installing for installation instructions.

Configuration

Refer to https://github.com/oracle/oci-go-sdk/blob/master/README.md#configuring for configuration instructions.

Quickstart

The following example shows how to get started with the SDK. The example belows creates an identityClient struct with the default configuration. It then utilizes the identityClient to list availability domains and prints them out to stdout

import (
	"context"
	"fmt"

	"k8s.io/autoscaler/cluster-autoscaler/cloudprovider/oci/vendor-internal/github.com/oracle/oci-go-sdk/v65/common"
	"github.com/oracle/oci-go-sdk/v65/identity"
)

func main() {
	c, err := identity.NewIdentityClientWithConfigurationProvider(common.DefaultConfigProvider())
	if err != nil {
		fmt.Println("Error:", err)
		return
	}

	// The OCID of the tenancy containing the compartment.
	tenancyID, err := common.DefaultConfigProvider().TenancyOCID()
	if err != nil {
		fmt.Println("Error:", err)
		return
	}

	request := identity.ListAvailabilityDomainsRequest{
		CompartmentId: &tenancyID,
	}

	r, err := client.ListAvailabilityDomains(context.Background(), request)
	if err != nil {
		fmt.Println("Error:", err)
		return
	}

	fmt.Printf("List of available domains: %v", r.Items)
	return
}

More examples can be found in the SDK Github repo: https://github.com/oracle/oci-go-sdk/tree/master/example

Optional Fields in the SDK

Optional fields are represented with the `mandatory:"false"` tag on input structs. The SDK will omit all optional fields that are nil when making requests. In the case of enum-type fields, the SDK will omit fields whose value is an empty string.

Helper Functions

The SDK uses pointers for primitive types in many input structs. To aid in the construction of such structs, the SDK provides functions that return a pointer for a given value. For example:

// Given the struct
type CreateVcnDetails struct {

	// Example: `172.16.0.0/16`
	CidrBlock *string `mandatory:"true" json:"cidrBlock"`

	CompartmentId *string `mandatory:"true" json:"compartmentId"`

	DisplayName *string `mandatory:"false" json:"displayName"`

}

// We can use the helper functions to build the struct
details := core.CreateVcnDetails{
	CidrBlock:     common.String("172.16.0.0/16"),
	CompartmentId: common.String("someOcid"),
	DisplayName:   common.String("myVcn"),
}

Customizing Requests

The SDK exposes functionality that allows the user to customize any http request before is sent to the service.

You can do so by setting the `Interceptor` field in any of the `Client` structs. For example:

client, err := audit.NewAuditClientWithConfigurationProvider(common.DefaultConfigProvider())
if err != nil {
	panic(err)
}

// This will add a header called "X-CustomHeader" to all request
// performed with client
client.Interceptor = func(request *http.Request) error {
	request.Header.Set("X-CustomHeader", "CustomValue")
	return nil
}

The Interceptor closure gets called before the signing process, thus any changes done to the request will be properly signed and submitted to the service.

Signing Custom Requests

The SDK exposes a stand-alone signer that can be used to signing custom requests. Related code can be found here: https://github.com/oracle/oci-go-sdk/blob/master/common/http_signer.go.

The example below shows how to create a default signer.

client := http.Client{}
var request http.Request
request = ... // some custom request

// Set the Date header
request.Header.Set("Date", time.Now().UTC().Format(http.TimeFormat))

// And a provider of cryptographic keys
provider := common.DefaultConfigProvider()

// Build the signer
signer := common.DefaultSigner(provider)

// Sign the request
signer.Sign(&request)

// Execute the request
client.Do(&request)

The signer also allows more granular control on the headers used for signing. For example:

client := http.Client{}
var request http.Request
request = ... // some custom request

// Set the Date header
request.Header.Set("Date", time.Now().UTC().Format(http.TimeFormat))

// Mandatory headers to be used in the sign process
defaultGenericHeaders    := []string{"date", "(request-target)", "host"}

// Optional headers
optionalHeaders := []string{"content-length", "content-type", "x-content-sha256"}

// A predicate that specifies when to use the optional signing headers
optionalHeadersPredicate := func (r *http.Request) bool {
	return r.Method == http.MethodPost
}

// And a provider of cryptographic keys
provider := common.DefaultConfigProvider()

// Build the signer
signer := common.RequestSigner(provider, defaultGenericHeaders, optionalHeaders)

// Sign the request
signer.Sign(&request)

// Execute the request
client.Do(&request)

You can combine a custom signer with the exposed clients in the SDK. This allows you to add custom signed headers to the request. Following is an example:

//Create a provider of cryptographic keys
provider := common.DefaultConfigProvider()

//Create a client for the service you interested in
client, _ := identity.NewIdentityClientWithConfigurationProvider(provider)

//Define a custom header to be signed, and add it to the list of default headers
customHeader := "opc-my-token"
allHeaders := append(common.DefaultGenericHeaders(), customHeader)

//Overwrite the signer in your client to sign the new slice of headers
client.Signer = common.RequestSigner(provider, allHeaders, common.DefaultBodyHeaders())

//Set the value of the header. This can be done with an Interceptor
client.Interceptor = func(request *http.Request) error {
	request.Header.Add(customHeader, "customvalue")
	return nil
}

//Execute your operation as before
client.ListGroups(..)

Bear in mind that some services have a white list of headers that it expects to be signed. Therefore, adding an arbitrary header can result in authentications errors. To see a runnable example, see https://github.com/oracle/oci-go-sdk/blob/master/example/example_identity_test.go

For more information on the signing algorithm refer to: https://docs.cloud.oracle.com/Content/API/Concepts/signingrequests.htm

Polymorphic JSON Requests and Responses

Some operations accept or return polymorphic JSON objects. The SDK models such objects as interfaces. Further the SDK provides structs that implement such interfaces. Thus, for all operations that expect interfaces as input, pass the struct in the SDK that satisfies such interface. For example:

client, err := identity.NewIdentityClientWithConfigurationProvider(common.DefaultConfigProvider())
if err != nil {
	panic(err)
}

// The CreateIdentityProviderRequest takes a CreateIdentityProviderDetails interface as input
rCreate := identity.CreateIdentityProviderRequest{}

// The CreateSaml2IdentityProviderDetails struct implements the CreateIdentityProviderDetails interface
details := identity.CreateSaml2IdentityProviderDetails{}
details.CompartmentId = common.String(getTenancyID())
details.Name = common.String("someName")
//... more setup if needed
// Use the above struct
rCreate.CreateIdentityProviderDetails = details

// Make the call
rspCreate, createErr := client.CreateIdentityProvider(context.Background(), rCreate)

In the case of a polymorphic response you can type assert the interface to the expected type. For example:

rRead := identity.GetIdentityProviderRequest{}
rRead.IdentityProviderId = common.String("aValidId")
response, err := client.GetIdentityProvider(context.Background(), rRead)

provider := response.IdentityProvider.(identity.Saml2IdentityProvider)

An example of polymorphic JSON request handling can be found here: https://github.com/oracle/oci-go-sdk/blob/master/example/example_core_test.go#L63

Pagination

When calling a list operation, the operation will retrieve a page of results. To retrieve more data, call the list operation again, passing in the value of the most recent response's OpcNextPage as the value of Page in the next list operation call. When there is no more data the OpcNextPage field will be nil. An example of pagination using this logic can be found here: https://github.com/oracle/oci-go-sdk/blob/master/example/example_core_pagination_test.go

Logging and Debugging

The SDK has a built-in logging mechanism used internally. The internal logging logic is used to record the raw http requests, responses and potential errors when (un)marshalling request and responses.

Built-in logging in the SDK is controlled via the environment variable "OCI_GO_SDK_DEBUG" and its contents. The below are possible values for the "OCI_GO_SDK_DEBUG" variable

1. "info" or "i" enables all info logging messages

2. "debug" or "d" enables all debug and info logging messages

3. "verbose" or "v" or "1" enables all verbose, debug and info logging messages

4. "null" turns all logging messages off.

If the value of the environment variable does not match any of the above then default logging level is "info". If the environment variable is not present then no logging messages are emitted.

You can also enable logs by code. For example

var dlog DefaultSDKLogger
dlog.currentLoggingLevel = 2
dlog.debugLogger = log.New(os.Stderr, "DEBUG ", log.Ldate|log.Lmicroseconds|log.Lshortfile)
SetSDKLogger(dlog)

This way you enable debug logs by code.

The default destination for logging is Stderr and if you want to output log to a file you can set via environment variable "OCI_GO_SDK_LOG_OUTPUT_MODE". The below are possible values

1. "file" or "f" enables all logging output saved to file

2. "combine" or "c" enables all logging output to both stderr and file

If the value does not match any of the above or does not exist then default logging output will be set to Stderr

You can also customize the log file location and name via "OCI_GO_SDK_LOG_FILE" environment variable, the value should be the path to a specific file If this environment variable is not present, the default location will be the project root path

Retry

Sometimes you may need to wait until an attribute of a resource, such as an instance or a VCN, reaches a certain state. An example of this would be launching an instance and then waiting for the instance to become available, or waiting until a subnet in a VCN has been terminated. You might also want to retry the same operation again if there's network issue etc... This can be accomplished by using the RequestMetadata.RetryPolicy(request level configuration), alternatively, global(all services) or client level RetryPolicy configration is also possible. You can find the examples here: https://github.com/oracle/oci-go-sdk/blob/master/example/example_retry_test.go

If you are trying to make a PUT/POST API call with binary request body, please make sure the binary request body is resettable, which means the request body should inherit Seeker interface.

The Retry behavior Precedence (Highest to lowest) is defined as below:-

Operation level retry policy
Client level retry policy
Global level retry policy
Environment level default retry policy for default retry
Service level default retry policy

Default Retry Policy

The OCI Go SDK defines a default retry policy that retries on the errors suitable for retries (see https://docs.oracle.com/en-us/iaas/Content/API/References/apierrors.htm), for a recommended period of time (up to 7 attempts spread out over at most approximately 1.5 minutes). The default retry policy is defined by :

Default Retry-able Errors Below is the list of default retry-able errors for which retry attempts should be made.

The following errors should be retried (with backoff).

HTTP Code Customer-facing Error Code

409	 		IncorrectState
429			Any Response Body
500			Any Response Body
502			Any Response Body
503			Any Response Body
504			Any Response Body

Apart from the above errors, retries should also be attempted in the following Client Side errors :

1. HTTP Connection timeout 2. Request Connection Errors 3. Request Exceptions 4. Other timeouts (like Read Timeout)

The above errors can be avoided through retrying and hence, are classified as the default retry-able errors.

Additionally, retries should also be made for Circuit Breaker exceptions (Exceptions raised by Circuit Breaker in an open state)

Default Termination Strategy The termination strategy defines when SDKs should stop attempting to retry. In other words, it's the deadline for retries. The OCI SDKs should stop retrying the operation after 7 retry attempts. This means the SDKs will have retried for ~98 seconds or ~1.5 minutes have elapsed due to total delays. SDKs will make a total of 8 attempts. (1 initial request + 7 retries)

Default Delay Strategy Default Delay Strategy - The delay strategy defines the amount of time to wait between each of the retry attempts.

The default delay strategy chosen for the SDK – Exponential backoff with jitter, using:

1. The base time to use in retry calculations will be 1 second 2. An exponent of 2. When calculating the next retry time, the SDK will raise this to the power of the number of attempts 3. A maximum wait time between calls of 30 seconds (Capped) 4. Added jitter value between 0-1000 milliseconds to spread out the requests

Configure and use default retry policy

// use SDK's default retry policy
defaultRetryPolicy := common.DefaultRetryPolicy()

You can set this retry policy for a single request:

request.RequestMetadata = common.RequestMetadata{
	RetryPolicy: &defaultRetryPolicy,
}

or for all requests made by a client:

client.SetCustomClientConfiguration(common.CustomClientConfiguration{
	RetryPolicy: &defaultRetryPolicy,
})

or for all requests made by all clients:

common.GlobalRetry = &defaultRetryPolicy

or setting default retry via environment varaible, which is a global switch for all services:

export OCI_SDK_DEFAULT_RETRY_ENABLED=TRUE

Some services enable retry for operations by default, this can be overridden using any alternatives mentioned above. To know which service operations have retries enabled by default, look at the operation's description in the SDK - it will say whether that it has retries enabled by default

Eventual Consistency

Some resources may have to be replicated across regions and are only eventually consistent. That means the request to create, update, or delete the resource succeeded, but the resource is not available everywhere immediately. Creating, updating, or deleting any resource in the Identity service is affected by eventual consistency, and doing so may cause other operations in other services to fail until the Identity resource has been replicated.

For example, the request to CreateTag in the Identity service in the home region succeeds, but immediately using that created tag in another region in a request to LaunchInstance in the Compute service may fail.

If you are creating, updating, or deleting resources in the Identity service, we recommend using an eventually consistent retry policy for any service you access. The default retry policy already deals with eventual consistency. Example:

// use SDK's default retry policy (which also deals with eventual consistency)
defaultRetryPolicy := common.DefaultRetryPolicy()

This retry policy will use a different strategy if an eventually consistent change was made in the recent past (called the "eventually consistent window", currently defined to be 4 minutes after the eventually consistent change). This special retry policy for eventual consistency will:

1. make up to 9 attempts (including the initial attempt); if an attempt is successful, no more attempts will be made

2. retry at most until (a) approximately the end of the eventually consistent window or (b) the end of the default retry period of about 1.5 minutes, whichever is farther in the future; if an attempt is successful, no more attempts will be made, and the OCI Go SDK will not wait any longer

3. retry on the error codes 400-RelatedResourceNotAuthorizedOrNotFound, 404-NotAuthorizedOrNotFound, and 409-NotAuthorizedOrResourceAlreadyExists, for which the default retry policy does not retry, in addition to the errors the default retry policy retries on (see https://docs.oracle.com/en-us/iaas/Content/API/References/apierrors.htm)

If there were no eventually consistent actions within the recent past, then this special retry strategy is not used.

If you want a retry policy that does not handle eventual consistency in a special way, for example because you retry on all error responses, you can use DefaultRetryPolicyWithoutEventualConsistency or NewRetryPolicyWithOptions with the common.ReplaceWithValuesFromRetryPolicy(common.DefaultRetryPolicyWithoutEventualConsistency()) option:

// use SDK's default retry policy, but without eventual consistency
noEcRetryPolicy := common.DefaultRetryPolicyWithoutEventualConsistency()

// or
noEcRetryPolicy := common.NewRetryPolicyWithOptions(
	common.ReplaceWithValuesFromRetryPolicy(common.DefaultRetryPolicyWithoutEventualConsistency()),
	// possibly other options...
)

The NewRetryPolicy function also creates a retry policy without eventual consistency.

Circuit Breaker

Circuit Breaker can prevent an application repeatedly trying to execute an operation that is likely to fail, allowing it to continue without waiting for the fault to be rectified or wasting CPU cycles, of course, it also enables an application to detect whether the fault has been resolved. If the problem appears to have been rectified, the application can attempt to invoke the operation. Go SDK intergrates sony/gobreaker solution, wraps in a circuit breaker object, which monitors for failures. Once the failures reach a certain threshold, the circuit breaker trips, and all further calls to the circuit breaker return with an error, this also saves the service from being overwhelmed with network calls in case of an outage.

Circuit Breaker Configuration definitions

Circuit Breaker Configuration Definitions 1. Failure Rate Threshold - The state of the CircuitBreaker changes from CLOSED to OPEN when the failure rate is equal or greater than a configurable threshold. For example when more than 50% of the recorded calls have failed. 2. Reset Timeout - The timeout after which an open circuit breaker will attempt a request if a request is made 3. Failure Exceptions - The list of Exceptions that will be regarded as failures for the circuit. 4. Minimum number of calls/ Volume threshold - Configures the minimum number of calls which are required (per sliding window period) before the CircuitBreaker can calculate the error rate.

Default Circuit Breaker Configuration

1. Failure Rate Threshold - 80% - This means when 80% of the requests calculated for a time window of 120 seconds have failed then the circuit will transition from closed to open. 2. Minimum number of calls/ Volume threshold - A value of 10, for the above defined time window of 120 seconds. 3. Reset Timeout - 30 seconds to wait before setting the breaker to halfOpen state, and trying the action again. 4. Failure Exceptions - The failures for the circuit will only be recorded for the retryable/transient exceptions. This means only the following exceptions will be regarded as failure for the circuit.

HTTP Code Customer-facing Error Code

409	 		IncorrectState
429			Any Response Body
500			Any Response Body
502			Any Response Body
503			Any Response Body
504			Any Response Body

Apart from the above, the following client side exceptions will also be treated as a failure for the circuit :

1. HTTP Connection timeout 2. Request Connection Errors 3. Request Exceptions 4. Other timeouts (like Read Timeout)

Go SDK enable circuit breaker with default configuration for most of the service clients, if you don't want to enable the solution, can disable the functionality before your application running Go SDK also supports customize Circuit Breaker with specified configurations. You can find the examples here: https://github.com/oracle/oci-go-sdk/blob/master/example/example_circuitbreaker_test.go To know which service clients have circuit breakers enabled, look at the service client's description in the SDK - it will say whether that it has circuit breakers enabled by default

Using the SDK with a Proxy Server

The GO SDK uses the net/http package to make calls to OCI services. If your environment requires you to use a proxy server for outgoing HTTP requests then you can set this up in the following ways:

1. Configuring environment variable as described here https://golang.org/pkg/net/http/#ProxyFromEnvironment 2. Modifying the underlying Transport struct for a service client

In order to modify the underlying Transport struct in HttpClient, you can do something similar to (sample code for audit service client):

// create audit service client
client, clerr := audit.NewAuditClientWithConfigurationProvider(common.DefaultConfigProvider())

// create a proxy url
proxyURL, err := url.Parse("http(s)://[username]:[password]@[ip address]:[port]")

client.HTTPClient = &http.Client{
	// adding the proxy settings to the http.Transport
	Transport: &http.Transport{
		Proxy: http.ProxyURL(proxyURL),
	},
}

Uploading Large Objects

The Object Storage service supports multipart uploads to make large object uploads easier by splitting the large object into parts. The Go SDK supports raw multipart upload operations for advanced use cases, as well as a higher level upload class that uses the multipart upload APIs. For links to the APIs used for multipart upload operations, see Managing Multipart Uploads (https://docs.cloud.oracle.com/iaas/Content/Object/Tasks/usingmultipartuploads.htm). Higher level multipart uploads are implemented using the UploadManager, which will: split a large object into parts for you, upload the parts in parallel, and then recombine and commit the parts as a single object in storage.

This code sample shows how to use the UploadManager to automatically split an object into parts for upload to simplify interaction with the Object Storage service: https://github.com/oracle/oci-go-sdk/blob/master/example/example_objectstorage_test.go

Forward Compatibility

Some response fields are enum-typed. In the future, individual services may return values not covered by existing enums for that field. To address this possibility, every enum-type response field is a modeled as a type that supports any string. Thus if a service returns a value that is not recognized by your version of the SDK, then the response field will be set to this value.

When individual services return a polymorphic JSON response not available as a concrete struct, the SDK will return an implementation that only satisfies the interface modeling the polymorphic JSON response.

New Region Support

If you are using a version of the SDK released prior to the announcement of a new region, you may need to use a workaround to reach it, depending on whether the region is in the oraclecloud.com realm.

A region is a localized geographic area. For more information on regions and how to identify them, see Regions and Availability Domains(https://docs.cloud.oracle.com/iaas/Content/General/Concepts/regions.htm).

A realm is a set of regions that share entities. You can identify your realm by looking at the domain name at the end of the network address. For example, the realm for xyz.abc.123.oraclecloud.com is oraclecloud.com.

oraclecloud.com Realm: For regions in the oraclecloud.com realm, even if common.Region does not contain the new region, the forward compatibility of the SDK can automatically handle it. You can pass new region names just as you would pass ones that are already defined. For more information on passing region names in the configuration, see Configuring (https://github.com/oracle/oci-go-sdk/blob/master/README.md#configuring). For details on common.Region, see (https://github.com/oracle/oci-go-sdk/blob/master/common/common.go).

Other Realms: For regions in realms other than oraclecloud.com, you can use the following workarounds to reach new regions with earlier versions of the SDK.

NOTE: Be sure to supply the appropriate endpoints for your region.

You can overwrite the target host with client.Host:

client.Host = 'https://identity.us-gov-phoenix-1.oraclegovcloud.com'

If you are authenticating via instance principals, you can set the authentication endpoint in an environment variable:

export OCI_SDK_AUTH_CLIENT_REGION_URL="https://identity.us-gov-phoenix-1.oraclegovcloud.com"

Contributions

Got a fix for a bug, or a new feature you'd like to contribute? The SDK is open source and accepting pull requests on GitHub https://github.com/oracle/oci-go-sdk

License

Licensing information available at: https://github.com/oracle/oci-go-sdk/blob/master/LICENSE.txt

Notifications

To be notified when a new version of the Go SDK is released, subscribe to the following feed: https://github.com/oracle/oci-go-sdk/releases.atom

Questions or Feedback

Please refer to this link: https://github.com/oracle/oci-go-sdk#help