bpf

package
v0.0.0-...-afa323b Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Dec 13, 2024 License: Apache-2.0, MIT Imports: 9 Imported by: 20

Documentation

Overview

Package bpf provides tools for working with Berkeley Packet Filter (BPF) programs. More information on BPF can be found at https://www.freebsd.org/cgi/man.cgi?bpf(4)

Index

Constants

View Source 
const (
	// MaxInstructions is the maximum number of instructions in a BPF program,
	// and is equal to Linux's BPF_MAXINSNS.
	MaxInstructions = 4096

	// ScratchMemRegisters is the number of M registers in a BPF virtual machine,
	// and is equal to Linux's BPF_MEMWORDS.
	ScratchMemRegisters = 16
)
View Source 
const (
	// Instruction class, stored in bits 0-2.
	Ld   = 0x00 // load into A
	Ldx  = 0x01 // load into X
	St   = 0x02 // store from A
	Stx  = 0x03 // store from X
	Alu  = 0x04 // arithmetic
	Jmp  = 0x05 // jump
	Ret  = 0x06 // return
	Misc = 0x07

	// Size of a load, stored in bits 3-4.
	W = 0x00 // 32 bits
	H = 0x08 // 16 bits
	B = 0x10 // 8 bits

	// Source operand for a load, stored in bits 5-7.
	// Address mode numbers in the comments come from Linux's
	// Documentation/networking/filter.txt.
	Imm = 0x00 // immediate value K (mode 4)
	Abs = 0x20 // data in input at byte offset K (mode 1)
	Ind = 0x40 // data in input at byte offset X+K (mode 2)
	Mem = 0x60 // M[K] (mode 3)
	Len = 0x80 // length of the input in bytes ("BPF extension len")
	Msh = 0xa0 // 4 * lower nibble of input at byte offset K (mode 5)

	// Source operands for arithmetic, jump, and return instructions.
	// Arithmetic and jump instructions can use K or X as source operands.
	// Return instructions can use K or A as source operands.
	K = 0x00 // still mode 4
	X = 0x08 // mode 0
	A = 0x10 // mode 9

	// Arithmetic instructions, stored in bits 4-7.
	Add = 0x00
	Sub = 0x10 // A - src
	Mul = 0x20
	Div = 0x30 // A / src
	Or  = 0x40
	And = 0x50
	Lsh = 0x60 // A << src
	Rsh = 0x70 // A >> src
	Neg = 0x80 // -A (src ignored)
	Mod = 0x90 // A % src
	Xor = 0xa0

	// Jump instructions, stored in bits 4-7.
	Ja   = 0x00 // unconditional (uses K for jump offset)
	Jeq  = 0x10 // if A == src
	Jgt  = 0x20 // if A > src
	Jge  = 0x30 // if A >= src
	Jset = 0x40 // if (A & src) != 0

	// Miscellaneous instructions, stored in bits 3-7.
	Tax = 0x00 // A = X
	Txa = 0x80 // X = A

)

Parts of a linux.BPFInstruction.OpCode. Compare to the Linux kernel's include/uapi/linux/filter.h.

In the comments below:

  • A, X, and M[] are BPF virtual machine registers.

  • K refers to the instruction field linux.BPFInstruction.K.

  • Bits are counted from the LSB position.

View Source 
const (
	// DivisionByZero indicates that a program contains, or executed, a
	// division or modulo by zero.
	DivisionByZero = iota

	// InvalidEndOfProgram indicates that the last instruction of a program is
	// not a return.
	InvalidEndOfProgram

	// InvalidInstructionCount indicates that a program has zero instructions
	// or more than MaxInstructions instructions.
	InvalidInstructionCount

	// InvalidJumpTarget indicates that a program contains a jump whose target
	// is outside of the program's bounds.
	InvalidJumpTarget

	// InvalidLoad indicates that a program executed an invalid load of input
	// data.
	InvalidLoad

	// InvalidOpcode indicates that a program contains an instruction with an
	// invalid opcode.
	InvalidOpcode

	// InvalidRegister indicates that a program contains a load from, or store
	// to, a non-existent M register (index >= ScratchMemRegisters).
	InvalidRegister
)

Possible values for ProgramError.Code.

Variables

This section is empty.

Functions

func Decode 

func Decode(ins Instruction) (string, error)

Decode translates a single BPF instruction into text format.

func DecodeInstructions 

func DecodeInstructions(instns []Instruction) (string, error)

DecodeInstructions translates an array of BPF instructions into text format.

func DecodeProgram 

func DecodeProgram(p Program) (string, error)

DecodeProgram translates a compiled BPF program into text format.

func Exec 

func Exec[endian Endianness](p Program, in Input) (uint32, error)

Exec executes a BPF program over the given input and returns its return value.

func ToBytecode 

func ToBytecode(insns []Instruction) []byte

ToBytecode converts BPF instructions into raw BPF bytecode.

Types

type BigEndian 

type BigEndian uint8

BigEndian uses big-endian byte ordering.

type Endianness 

type Endianness interface {
	BigEndian | LittleEndian | NativeEndian
}

Endianness represents a byte order.

type Error 

type Error struct {
	// Code indicates the kind of error that occurred.
	Code int

	// PC is the program counter (index into the list of instructions) at which
	// the error occurred.
	PC int
}

Error is an error encountered while compiling or executing a BPF program.

func (Error) Error 

func (e Error) Error() string

Error implements error.Error.

type ExecutionMetrics 

type ExecutionMetrics struct {
	// ReturnValue is the result of the program execution.
	ReturnValue uint32

	// Coverage maps instruction indexes to whether or not they were executed.
	// This slice has the same size as the number of instructions as the BPF
	// program that was run, so it can be used as a way to get the program size.
	// Since an instruction can never run twice in BPF, this can also be used
	// to determine how many instructions were executed.
	Coverage []bool

	// InputAccessed maps input byte offsets to whether or not they were
	// read by the program during execution.
	InputAccessed []bool
}

ExecutionMetrics represents the result of executing a BPF program.

func InstrumentedExec 

func InstrumentedExec[endian Endianness](p Program, in Input) (ExecutionMetrics, error)

InstrumentedExec executes a BPF program over the given input while instrumenting it: recording memory accesses and lines executed. This is slower than Exec, but should return equivalent results.

func (*ExecutionMetrics) String 

func (e *ExecutionMetrics) String() string

String returns a human-readable view of an `Execution`.

type FragmentOutcomes 

type FragmentOutcomes struct {
	// MayFallThrough is true if executing the fragment may cause it to start
	// executing the program instruction that comes right after the last
	// instruction in this fragment (i.e. at `Fragment.toPC`).
	MayFallThrough bool

	// MayJumpToKnownOffsetBeyondFragment is true if executing the fragment may
	// jump to a fixed offset (or resolved label) that is not within the range
	// of the fragment itself, nor does it point to the instruction that would
	// come right after this fragment.
	// If the fragment jumps to an unresolved label, this will instead be
	// indicated in `MayJumpToUnresolvedLabels`.
	MayJumpToKnownOffsetBeyondFragment bool

	// MayJumpToUnresolvedLabels is the set of named labels that have not yet
	// been added to the program (the labels are not resolvable) but that the
	// fragment may jump to.
	MayJumpToUnresolvedLabels map[string]struct{}

	// MayReturnImmediate contains the set of possible immediate return values
	// that the fragment may return.
	MayReturnImmediate map[linux.BPFAction]struct{}

	// MayReturnRegisterA is true if the fragment may return the value of
	// register A.
	MayReturnRegisterA bool
}

FragmentOutcomes represents the set of outcomes that a ProgramFragment execution may result into.

func (FragmentOutcomes) MayReturn 

func (o FragmentOutcomes) MayReturn() bool

MayReturn returns whether the fragment may return for any reason.

func (FragmentOutcomes) String 

func (o FragmentOutcomes) String() string

String returns a list of possible human-readable outcomes.

type Input 

type Input []byte

Input represents a source of input data for a BPF program. (BPF documentation sometimes refers to the input data as the "packet" due to its origins as a packet processing DSL.) Unaligned loads are supported.

type Instruction 

type Instruction linux.BPFInstruction

Instruction is a type alias for linux.BPFInstruction. It adds a human-readable stringification and other helper functions.

+marshal slice:InstructionSlice +stateify savable +stateify identtype

func Jump 

func Jump(code uint16, k uint32, jt, jf uint8) Instruction

Jump returns an Instruction representing a BPF jump instruction.

func Optimize 

func Optimize(insns []Instruction) []Instruction

Optimize losslessly optimizes a BPF program. The BPF instructions are assumed to have been checked for validity and consistency. The instructions in `insns` may be modified in-place.

func ParseBytecode 

func ParseBytecode(bytecode []byte) ([]Instruction, error)

ParseBytecode converts raw BPF bytecode into BPF instructions. It verifies that the resulting set of instructions is a valid program.

func Stmt 

func Stmt(code uint16, k uint32) Instruction

Stmt returns an Instruction representing a BPF non-jump instruction.

func (Instruction) Equal 

func (ins Instruction) Equal(other Instruction) bool

Equal returns whether this instruction is equivalent to `other`.

func (Instruction) IsConditionalJump 

func (ins Instruction) IsConditionalJump() bool

IsConditionalJump returns true if `ins` is a conditional jump instruction.

func (Instruction) IsJump 

func (ins Instruction) IsJump() bool

IsJump returns true if `ins` is a jump instruction.

func (Instruction) IsReturn 

func (ins Instruction) IsReturn() bool

IsReturn returns true if `ins` is a return instruction.

func (Instruction) IsUnconditionalJump 

func (ins Instruction) IsUnconditionalJump() bool

IsUnconditionalJump returns true if `ins` is a conditional jump instruction.

func (Instruction) JumpOffsets 

func (ins Instruction) JumpOffsets() []JumpOffset

JumpOffsets returns the set of instruction offsets that this instruction may jump to. Returns a nil slice if this is not a jump instruction.

func (Instruction) ModifiesRegisterA 

func (ins Instruction) ModifiesRegisterA() bool

ModifiesRegisterA returns true iff this instruction modifies the value of the "A" register.

func (*Instruction) String 

func (ins *Instruction) String() string

String returns a human-readable version of the instruction.

type JumpOffset 

type JumpOffset struct {
	// Type is the type of jump that an instruction may execute.
	Type JumpType

	// Offset is the number of instructions that the jump skips over.
	Offset uint32
}

JumpOffset is a possible jump offset that an instruction may jump to.

type JumpType 

type JumpType int

JumpType is the type of jump target that an instruction may use. 

const (
	JumpDirect JumpType = iota
	JumpTrue
	JumpFalse
)

Types of jump that an instruction may use.

type LittleEndian 

type LittleEndian uint16

LittleEndian uses little-endian byte ordering.

type NativeEndian 

type NativeEndian uint32

NativeEndian uses native byte ordering.

type Program 

type Program struct {
	// contains filtered or unexported fields
}

Program is a BPF program that has been validated for consistency.

+stateify savable

func Compile 

func Compile(insns []Instruction, optimize bool) (Program, error)

Compile performs validation and optimization on a sequence of BPF instructions before wrapping them in a Program.

func (Program) Length 

func (p Program) Length() int

Length returns the number of instructions in the program.

type ProgramBuilder 

type ProgramBuilder struct {
	// contains filtered or unexported fields
}

ProgramBuilder assists with building a BPF program with jump labels that are resolved to their proper offsets.

func NewProgramBuilder 

func NewProgramBuilder() *ProgramBuilder

NewProgramBuilder creates a new ProgramBuilder instance.

func (*ProgramBuilder) AddDirectJumpLabel 

func (b *ProgramBuilder) AddDirectJumpLabel(labelName string)

AddDirectJumpLabel adds a new jump to the program where is labelled.

func (*ProgramBuilder) AddJump 

func (b *ProgramBuilder) AddJump(code uint16, k uint32, jt, jf uint8)

AddJump adds a new jump to the program.

func (*ProgramBuilder) AddJumpFalseLabel 

func (b *ProgramBuilder) AddJumpFalseLabel(code uint16, k uint32, jt uint8, jfLabel string)

AddJumpFalseLabel adds a new jump to the program where 'jump if false' is a label.

func (*ProgramBuilder) AddJumpLabels 

func (b *ProgramBuilder) AddJumpLabels(code uint16, k uint32, jtLabel, jfLabel string)

AddJumpLabels adds a new jump to the program where both jump targets are labels.

func (*ProgramBuilder) AddJumpTrueLabel 

func (b *ProgramBuilder) AddJumpTrueLabel(code uint16, k uint32, jtLabel string, jf uint8)

AddJumpTrueLabel adds a new jump to the program where 'jump if true' is a label.

func (*ProgramBuilder) AddLabel 

func (b *ProgramBuilder) AddLabel(name string) error

AddLabel sets the given label name at the current location. The next instruction is executed when the any code jumps to this label. More than one label can be added to the same location.

func (*ProgramBuilder) AddStmt 

func (b *ProgramBuilder) AddStmt(code uint16, k uint32)

AddStmt adds a new statement to the program.

func (*ProgramBuilder) Instructions 

func (b *ProgramBuilder) Instructions() ([]Instruction, error)

Instructions returns an array of BPF instructions representing the program with all labels resolved. Return error in case label resolution failed due to an invalid program.

N.B. Partial results will be returned in the error case, which is useful for debugging.

func (*ProgramBuilder) Record 

func (b *ProgramBuilder) Record() func() ProgramFragment

Record starts recording the instructions being added to the ProgramBuilder until the returned function is called. The returned function returns a ProgramFragment which represents the recorded instructions. It may be called repeatedly.

type ProgramFragment 

type ProgramFragment struct {
	// contains filtered or unexported fields
}

ProgramFragment is a set of not-compiled instructions that were added to a ProgramBuilder from the moment the `Record` function was called on it.

func (ProgramFragment) MayModifyRegisterA 

func (f ProgramFragment) MayModifyRegisterA() bool

MayModifyRegisterA returns whether this fragment may modify register A. A value of "true" does not necessarily mean that A *will* be modified, as the control flow of this fragment may skip over instructions that modify the A register.

func (ProgramFragment) Outcomes 

func (f ProgramFragment) Outcomes() FragmentOutcomes

Outcomes returns the set of possible outcomes that executing this fragment may result into.

func (ProgramFragment) String 

func (f ProgramFragment) String() string

String returns a string version of the fragment.

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.