http

package
v1.69.1 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Jan 25, 2023 License: MIT Imports: 41 Imported by: 13

Documentation

Overview

Package http implements a YARPC transport based on the HTTP/1.1 protocol. The HTTP transport provides first class support for Unary RPCs and experimental support for Oneway RPCs.

Usage

An HTTP Transport must be constructed to use this transport. 

httpTransport := http.NewTransport()

To serve your YARPC application over HTTP, pass an HTTP inbound in your yarpc.Config. 

myInbound := httpTransport.NewInbound(":8080")
dispatcher := yarpc.NewDispatcher(yarpc.Config{
	Name: "myservice",
	Inbounds: yarpc.Inbounds{myInbound},
})

To make requests to a YARPC application that supports HTTP, pass an HTTP outbound in your yarpc.Config. 

myserviceOutbound := httpTransport.NewSingleOutbound("http://127.0.0.1:8080")
dispatcher := yarpc.NewDispatcher(yarpc.Config{
	Name: "myclient",
	Outbounds: yarpc.Outbounds{
		"myservice": {Unary: myserviceOutbound},
	},
})

Note that stopping an HTTP transport does NOT immediately terminate ongoing requests. Connections will remain open until all clients have disconnected.

Configuration

An HTTP Transport may be configured using YARPC's configuration system. See TransportConfig, InboundConfig, and OutboundConfig for details on the different configuration parameters supported by this transport.

Wire Representation

YARPC requests and responses are sent as plain HTTP requests and responses. YARPC metadata is sent inside reserved HTTP headers. Application headers for requests and responses are sent as HTTP headers with the header names prefixed with a pre-defined string. See Constants for more information on the names of these headers. The request and response bodies are sent as-is in the HTTP request or response body.

See Also

YARPC Properties: https://github.com/yarpc/yarpc/blob/master/properties.md

Index

Examples

Constants

View Source 
const (
	// Name of the service sending the request. This corresponds to the
	// Request.Caller attribute.
	CallerHeader = "Rpc-Caller"

	// Name of the procedure of the caller sending the request. This corresponds to the
	// Request.CallerProcedure attribute.
	CallerProcedureHeader = "Rpc-Caller-Procedure"

	// Name of the encoding used for the request body. This corresponds to the
	// Request.Encoding attribute.
	EncodingHeader = "Rpc-Encoding"

	// Amount of time (in milliseconds) within which the request is expected
	// to finish.
	TTLMSHeader = "Context-TTL-MS"

	// Name of the procedure being called. This corresponds to the
	// Request.Procedure attribute.
	ProcedureHeader = "Rpc-Procedure"

	// Name of the service to which the request is being sent. This
	// corresponds to the Request.Service attribute. This header is also used
	// in responses to ensure requests are processed by the correct service.
	ServiceHeader = "Rpc-Service"

	// Shard key used by the destined service to shard the request. This
	// corresponds to the Request.ShardKey attribute.
	ShardKeyHeader = "Rpc-Shard-Key"

	// The traffic group responsible for handling the request. This
	// corresponds to the Request.RoutingKey attribute.
	RoutingKeyHeader = "Rpc-Routing-Key"

	// A service that can proxy the destined service. This corresponds to the
	// Request.RoutingDelegate attribute.
	RoutingDelegateHeader = "Rpc-Routing-Delegate"

	// Whether the response body contains an application error.
	ApplicationStatusHeader = "Rpc-Status"

	// ErrorCodeHeader contains the string representation of the error code.
	ErrorCodeHeader = "Rpc-Error-Code"

	// ErrorNameHeader contains the name of a user-defined error.
	ErrorNameHeader = "Rpc-Error-Name"

	// ErrorMessageHeader contains the message of an error, if the
	// BothResponseError feature is enabled.
	ErrorMessageHeader = "Rpc-Error-Message"

	// ErrorDetailsHeader contains the marshaled bytes of an error. Because
	// error details are mainly a gRPC concept, we use the header key name that
	// gRPC uses.
	// https://github.com/grpc/grpc-go/blob/04ea82009cdb9ecdefc6289f4c93ec919a10b3b6/internal/transport/handler_server.go#L218
	ErrorDetailsHeader = "Grpc-Status-Details-Bin"

	// AcceptsBothResponseErrorHeader says that the BothResponseError
	// feature is supported on the client. If the value is "true",
	// this indicates true.
	AcceptsBothResponseErrorHeader = "Rpc-Accepts-Both-Response-Error"

	// BothResponseErrorHeader says that the BothResponseError
	// feature is supported on the server. If any non-empty value is set,
	// this indicates true.
	BothResponseErrorHeader = "Rpc-Both-Response-Error"
)

HTTP headers used in requests and responses to send YARPC metadata.

View Source 
const (
	// The request was successful.
	ApplicationSuccessStatus = "success"

	// An error occurred. The response body contains an application header.
	ApplicationErrorStatus = "error"

	// AcceptTrue is the true value used for accept headers.
	AcceptTrue = "true"
)

Valid values for the Rpc-Status header.

View Source 
const ApplicationHeaderPrefix = "Rpc-Header-"

ApplicationHeaderPrefix is the prefix added to application header keys to send them in requests or responses.

View Source 
const TransportName = "http"

TransportName is the name of the transport.

This value is what is used as transport.Request#Transport and transport.Namer for Outbounds.

Variables

This section is empty.

Functions

func TransportSpec added in v1.9.0 

func TransportSpec(opts ...Option) yarpcconfig.TransportSpec

TransportSpec returns a TransportSpec for the HTTP transport.

See TransportConfig, InboundConfig, and OutboundConfig for details on the different configuration parameters supported by this Transport.

Any Transport, Inbound or Outbound option may be passed to this function. These options will be applied BEFORE configuration parameters are interpreted. This allows configuration parameters to override Option provided to TransportSpec.

Types

type Inbound 

type Inbound struct {
	// contains filtered or unexported fields
}

Inbound receives YARPC requests using an HTTP server. It may be constructed using the NewInbound method on the Transport.

Example 
package main

import (
	"log"

	"go.uber.org/yarpc"
	"go.uber.org/yarpc/transport/http"
)

func main() {
	transport := http.NewTransport()
	inbound := transport.NewInbound("127.0.0.1:8888")

	dispatcher := yarpc.NewDispatcher(yarpc.Config{
		Name:     "myservice",
		Inbounds: yarpc.Inbounds{inbound},
	})
	if err := dispatcher.Start(); err != nil {
		log.Fatal(err)
	}
	defer dispatcher.Stop()
}

Output:

func (*Inbound) Addr 

func (i *Inbound) Addr() net.Addr

Addr returns the address on which the server is listening. Returns nil if Start has not been called yet.

func (*Inbound) Introspect added in v1.0.0 

func (i *Inbound) Introspect() introspection.InboundStatus

Introspect returns the state of the inbound for introspection purposes.

func (*Inbound) IsRunning added in v1.0.0 

func (i *Inbound) IsRunning() bool

IsRunning returns whether the inbound is currently running

func (*Inbound) SetRouter added in v1.0.0 

func (i *Inbound) SetRouter(router transport.Router)

SetRouter configures a router to handle incoming requests. This satisfies the transport.Inbound interface, and would be called by a dispatcher when it starts.

func (*Inbound) Start added in v1.0.0 

func (i *Inbound) Start() error

Start starts the inbound with a given service detail, opening a listening socket.

func (*Inbound) Stop added in v1.0.0 

func (i *Inbound) Stop() error

Stop the inbound using Shutdown.

func (*Inbound) Tracer added in v1.0.0 

func (i *Inbound) Tracer(tracer opentracing.Tracer) *Inbound

Tracer configures a tracer on this inbound.

func (*Inbound) Transports added in v1.0.0 

func (i *Inbound) Transports() []transport.Transport

Transports returns the inbound's HTTP transport.

type InboundConfig added in v1.9.0 

type InboundConfig struct {
	// Address to listen on. This field is required.
	Address string `config:"address,interpolate"`
	// The additional headers, starting with x, that should be
	// propagated to handlers. This field is optional.
	GrabHeaders []string `config:"grabHeaders"`
	// The maximum amount of time to wait for the inbound to shutdown.
	ShutdownTimeout *time.Duration `config:"shutdownTimeout"`
	// TLS configuration of the inbound.
	TLSConfig TLSConfig `config:"tls"`
}

InboundConfig configures an HTTP inbound. 

inbounds:
  http:
    address: ":80"
    grabHeaders:
      - x-foo
      - x-bar
    shutdownTimeout: 5s

type InboundOption 

type InboundOption func(*Inbound)

InboundOption customizes the behavior of an HTTP Inbound constructed with NewInbound.

func GrabHeaders added in v1.17.0 

func GrabHeaders(headers ...string) InboundOption

GrabHeaders specifies additional headers that are not prefixed with ApplicationHeaderPrefix that should be propagated to the caller.

All headers given must begin with x- or X- or the Inbound that the returned option is passed to will return an error when Start is called.

Headers specified with GrabHeaders are case-insensitive. https://www.w3.org/Protocols/rfc2616/rfc2616-sec4.html#sec4.2

func InboundTLSConfiguration added in v1.63.0 

func InboundTLSConfiguration(tlsConfig *tls.Config) InboundOption

InboundTLSConfiguration returns an InboundOption that provides the TLS confiugration used for setting up TLS inbound.

func InboundTLSMode added in v1.63.0 

func InboundTLSMode(mode yarpctls.Mode) InboundOption

InboundTLSMode returns an InboundOption that sets inbound TLS mode. It must be noted that TLS configuration must be passed separately using inbound option InboundTLSConfiguration.

func Interceptor added in v1.20.0 

func Interceptor(interceptor func(yarpcHandler http.Handler) http.Handler) InboundOption

Interceptor specifies a function which can wrap the YARPC handler. If provided, this function will be called with an http.Handler which will route requests through YARPC. The http.Handler returned by this function may delegate requests to the provided YARPC handler to route them through YARPC. Interceptors are applied in LIFO order, leading to an earlier interceptor's handler being executed before latter interceptor handlers

Example 
package main

import (
	"io"
	"log"

	nethttp "net/http"
	"os"

	"go.uber.org/yarpc"
	"go.uber.org/yarpc/transport/http"
)

func main() {
	// import nethttp "net/http"

	// Given a fallback http.Handler
	fallback := nethttp.HandlerFunc(func(w nethttp.ResponseWriter, r *nethttp.Request) {
		io.WriteString(w, "hello, world!")
	})

	// Create an interceptor that falls back to a handler when the HTTP request is
	// missing the RPC-Encoding header.
	intercept := func(transportHandler nethttp.Handler) nethttp.Handler {
		return nethttp.HandlerFunc(func(w nethttp.ResponseWriter, r *nethttp.Request) {
			if r.Header.Get(http.EncodingHeader) == "" {
				// Not a YARPC request, use fallback handler.
				fallback.ServeHTTP(w, r)
			} else {
				transportHandler.ServeHTTP(w, r)
			}
		})
	}

	// Create a new inbound, attaching the interceptor
	transport := http.NewTransport()
	inbound := transport.NewInbound("127.0.0.1:8889", http.Interceptor(intercept))

	// Fire up a dispatcher with the new inbound.
	dispatcher := yarpc.NewDispatcher(yarpc.Config{
		Name:     "server",
		Inbounds: yarpc.Inbounds{inbound},
	})
	if err := dispatcher.Start(); err != nil {
		log.Fatal(err)
	}
	defer dispatcher.Stop()

	// Make a non-YARPC request to the / endpoint.
	res, err := nethttp.Get("http://127.0.0.1:8889/")
	if err != nil {
		log.Fatal(err)
	}
	defer res.Body.Close()

	if _, err := io.Copy(os.Stdout, res.Body); err != nil {
		log.Fatal(err)
	}
}

Output:

hello, world!

func Mux 

func Mux(pattern string, mux *http.ServeMux) InboundOption

Mux specifies that the HTTP server should make the YARPC endpoint available under the given pattern on the given ServeMux. By default, the YARPC service is made available on all paths of the HTTP server. By specifying a ServeMux, users can narrow the endpoints under which the YARPC service is available and offer their own non-YARPC endpoints.

Example 
package main

import (
	"fmt"
	"io"
	"log"

	nethttp "net/http"
	"os"

	"go.uber.org/yarpc"
	"go.uber.org/yarpc/transport/http"
)

func main() {
	// import nethttp "net/http"

	// We set up a ServeMux which provides a /health endpoint.
	mux := nethttp.NewServeMux()
	mux.HandleFunc("/health", func(w nethttp.ResponseWriter, _ *nethttp.Request) {
		if _, err := fmt.Fprintln(w, "hello from /health"); err != nil {
			panic(err)
		}
	})

	// This inbound will serve the YARPC service on the path /yarpc.  The
	// /health endpoint on the Mux will be left alone.
	transport := http.NewTransport()
	inbound := transport.NewInbound("127.0.0.1:8888", http.Mux("/yarpc", mux))

	// Fire up a dispatcher with the new inbound.
	dispatcher := yarpc.NewDispatcher(yarpc.Config{
		Name:     "server",
		Inbounds: yarpc.Inbounds{inbound},
	})
	if err := dispatcher.Start(); err != nil {
		log.Fatal(err)
	}
	defer dispatcher.Stop()

	// Make a request to the /health endpoint.
	res, err := nethttp.Get("http://127.0.0.1:8888/health")
	if err != nil {
		log.Fatal(err)
	}
	defer res.Body.Close()

	if _, err := io.Copy(os.Stdout, res.Body); err != nil {
		log.Fatal(err)
	}
}

Output:

hello from /health

func ShutdownTimeout added in v1.33.0 

func ShutdownTimeout(timeout time.Duration) InboundOption

ShutdownTimeout specifies the maximum duration the inbound should wait for closing idle connections, and pending calls to complete.

Set to 0 to wait for a complete drain.

Defaults to 5 seconds.

type Option added in v1.8.0 

type Option interface {
	// contains filtered or unexported methods
}

Option allows customizing the YARPC HTTP transport. Any InboundOption, OutboundOption, or TransportOption is a valid Option.

type Outbound added in v0.4.0 

type Outbound struct {
	// contains filtered or unexported fields
}

Outbound sends YARPC requests over HTTP. It may be constructed using the NewOutbound function or the NewOutbound or NewSingleOutbound methods on the HTTP Transport. It is recommended that services use a single HTTP transport to construct all HTTP outbounds, ensuring efficient sharing of resources across the different outbounds.

Example 
package main

import (
	"go.uber.org/yarpc"
	"go.uber.org/yarpc/transport/http"
)

func main() {
	transport := http.NewTransport()

	yarpc.NewDispatcher(yarpc.Config{
		Name: "myservice",
		Outbounds: yarpc.Outbounds{
			"myservice": {
				Unary: transport.NewSingleOutbound("http://127.0.0.1:8888"),
			},
			"anotherservice": {
				Unary: transport.NewSingleOutbound("http://127.0.0.1:9999"),
			},
		},
	})
}

Output:

func NewOutbound 

func NewOutbound(chooser peer.Chooser, opts ...OutboundOption) *Outbound

NewOutbound builds an HTTP outbound that sends requests to peers supplied by the given peer.Chooser. The URL template for used for the different peers may be customized using the URLTemplate option.

The peer chooser and outbound must share the same transport, in this case the HTTP transport. The peer chooser must use the transport's RetainPeer to obtain peer instances and return those peers to the outbound when it calls Choose. The concrete peer type is private and intrinsic to the HTTP transport.

func (*Outbound) Call added in v0.4.0 

func (o *Outbound) Call(ctx context.Context, treq *transport.Request) (*transport.Response, error)

Call makes a HTTP request

func (*Outbound) CallOneway added in v0.4.0 

func (o *Outbound) CallOneway(ctx context.Context, treq *transport.Request) (transport.Ack, error)

CallOneway makes a oneway request

func (*Outbound) Chooser added in v1.9.0 

func (o *Outbound) Chooser() peer.Chooser

Chooser returns the outbound's peer chooser.

func (*Outbound) Introspect added in v1.0.0 

func (o *Outbound) Introspect() introspection.OutboundStatus

Introspect returns basic status about this outbound.

func (*Outbound) IsRunning added in v1.0.0 

func (o *Outbound) IsRunning() bool

IsRunning returns whether the Outbound is running.

func (*Outbound) RoundTrip added in v1.30.0 

func (o *Outbound) RoundTrip(hreq *http.Request) (*http.Response, error)

RoundTrip implements the http.RoundTripper interface, making a YARPC HTTP outbound suitable as a Transport when constructing an HTTP Client. An HTTP client is suitable only for relative paths to a single outbound service. The HTTP outbound overrides the host:port portion of the URL of the provided request.

Sample usage: 

client := http.Client{Transport: outbound}

Thereafter use the Golang standard library HTTP to send requests with this client. 

ctx, cancel := context.WithTimeout(context.Background(), time.Second)
defer cancel()
req, err := http.NewRequest("GET", "http://example.com/", nil /* body */)
req = req.WithContext(ctx)
res, err := client.Do(req)

All requests must have a deadline on the context. The peer chooser for raw HTTP requests will receive a YARPC transport.Request with no body.

OpenTracing information must be added manually, before this call, to support context propagation.

func (*Outbound) Start added in v0.4.0 

func (o *Outbound) Start() error

Start the HTTP outbound

func (*Outbound) Stop added in v0.4.0 

func (o *Outbound) Stop() error

Stop the HTTP outbound

func (*Outbound) TransportName added in v1.43.0 

func (o *Outbound) TransportName() string

TransportName is the transport name that will be set on `transport.Request` struct.

func (*Outbound) Transports added in v1.0.0 

func (o *Outbound) Transports() []transport.Transport

Transports returns the outbound's HTTP transport.

type OutboundConfig added in v1.9.0 

type OutboundConfig struct {
	yarpcconfig.PeerChooser

	// URL to which requests will be sent for this outbound. This field is
	// required.
	URL string `config:"url,interpolate"`
	// HTTP headers that will be added to all requests made through this
	// outbound.
	//
	//  http:
	//    url: "http://localhost:8080/yarpc"
	//    addHeaders:
	//      X-Caller: myserice
	//      X-Token: foo
	AddHeaders map[string]string `config:"addHeaders"`
	// TLS config enables TLS outbound.
	//
	//  http:
	//    url: "http://localhost:8080/yarpc"
	//    tls:
	//      mode: enforced
	//      spiffe-ids:
	//        - destination-id
	TLS OutboundTLSConfig `config:"tls"`
}

OutboundConfig configures an HTTP outbound. 

outbounds:
  keyvalueservice:
    http:
      url: "http://127.0.0.1:80/"

The HTTP outbound supports both, Unary and Oneway transport types. To use it for only one of these, nest the section inside a "unary" or "onewy" section. 

outbounds:
  keyvalueservice:
    unary:
      http:
        url: "http://127.0.0.1:80/"

An HTTP outbound can also configure a peer list. In this case, there can still be a "url" and it serves as a template for the HTTP client, expressing whether to use "http:" or "https:" and what path to use. The address gets replaced with peers from the peer list. 

outbounds:
  keyvalueservice:
    unary:
      http:
        url: "https://address/rpc"
        round-robin:
          peers:
            - 127.0.0.1:8080
            - 127.0.0.1:8081

type OutboundOption 

type OutboundOption func(*Outbound)

OutboundOption customizes an HTTP Outbound.

func AddHeader added in v1.8.0 

func AddHeader(key, value string) OutboundOption

AddHeader specifies that an HTTP outbound should always include the given header in outgoung requests. 

httpTransport.NewOutbound(chooser, http.AddHeader("X-Token", "TOKEN"))

Note that headers starting with "Rpc-" are reserved by YARPC. This function will panic if the header starts with "Rpc-".

func OutboundDestinationServiceName added in v1.67.0 

func OutboundDestinationServiceName(name string) OutboundOption

OutboundDestinationServiceName returns a OutboundOption which provides the name of the destination service. Mostly used in outbound TLS dialer metrics.

func OutboundTLSConfiguration added in v1.67.0 

func OutboundTLSConfiguration(config *tls.Config) OutboundOption

OutboundTLSConfiguration return a OutboundOption which provides tls config for the outbound.

func URLTemplate added in v1.0.0 

func URLTemplate(template string) OutboundOption

URLTemplate specifies the URL this outbound makes requests to. For peer.Chooser-based outbounds, the peer (host:port) spection of the URL may vary from call to call but the rest will remain unchanged. For single-peer outbounds, the URL will be used as-is.

type OutboundTLSConfig added in v1.67.0 

type OutboundTLSConfig struct {
	// Mode when set to Enforced enables outbound TLS.
	// Note: outbound TLS configuration provider must be given as an option
	// which is used for fetching client tls.Config.
	Mode yarpctls.Mode `config:"mode,interpolate"`
	// SpiffeIDs is list of accepted server spiffe IDs. This cannot be empty
	// list.
	SpiffeIDs []string `config:"spiffe-ids"`
}

OutboundTLSConfig configures TLS for the HTTP outbound.

type TLSConfig added in v1.63.0 

type TLSConfig struct {
	// Mode when set to Permissive or Enforced enables TLS inbound and
	// TLS configuration must be passed as an inbound option.
	Mode yarpctls.Mode `config:"mode,interpolate"`
}

TLSConfig specifies the TLS configuration of the HTTP inbound.

type Transport added in v1.0.0 

type Transport struct {
	// contains filtered or unexported fields
}

Transport keeps track of HTTP peers and the associated HTTP client. It allows using a single HTTP client to make requests to multiple YARPC services and pooling the resources needed therein.

func NewTransport added in v1.0.0 

func NewTransport(opts ...TransportOption) *Transport

NewTransport creates a new HTTP transport for managing peers and sending requests

func (*Transport) IsRunning added in v1.0.0 

func (a *Transport) IsRunning() bool

IsRunning returns whether the HTTP transport is running.

func (*Transport) NewInbound added in v1.0.0 

func (t *Transport) NewInbound(addr string, opts ...InboundOption) *Inbound

NewInbound builds a new HTTP inbound that listens on the given address and sharing this transport.

func (*Transport) NewOutbound added in v1.0.0 

func (t *Transport) NewOutbound(chooser peer.Chooser, opts ...OutboundOption) *Outbound

NewOutbound builds an HTTP outbound that sends requests to peers supplied by the given peer.Chooser. The URL template for used for the different peers may be customized using the URLTemplate option.

The peer chooser and outbound must share the same transport, in this case the HTTP transport. The peer chooser must use the transport's RetainPeer to obtain peer instances and return those peers to the outbound when it calls Choose. The concrete peer type is private and intrinsic to the HTTP transport.

func (*Transport) NewSingleOutbound added in v1.0.0 

func (t *Transport) NewSingleOutbound(uri string, opts ...OutboundOption) *Outbound

NewSingleOutbound builds an outbound that sends YARPC requests over HTTP to the specified URL.

The URLTemplate option has no effect in this form.

func (*Transport) ReleasePeer added in v1.0.0 

func (a *Transport) ReleasePeer(pid peer.Identifier, sub peer.Subscriber) error

ReleasePeer releases a peer from the peer.Subscriber and removes that peer from the Transport if nothing is listening to it

func (*Transport) RetainPeer added in v1.0.0 

func (a *Transport) RetainPeer(pid peer.Identifier, sub peer.Subscriber) (peer.Peer, error)

RetainPeer gets or creates a Peer for the specified peer.Subscriber (usually a peer.Chooser)

func (*Transport) Start added in v1.0.0 

func (a *Transport) Start() error

Start starts the HTTP transport.

func (*Transport) Stop added in v1.0.0 

func (a *Transport) Stop() error

Stop stops the HTTP transport.

type TransportConfig added in v1.9.0 

type TransportConfig struct {
	// Specifies the keep-alive period for all HTTP clients. This field is
	// optional.
	KeepAlive             time.Duration       `config:"keepAlive"`
	MaxIdleConns          int                 `config:"maxIdleConns"`
	MaxIdleConnsPerHost   int                 `config:"maxIdleConnsPerHost"`
	IdleConnTimeout       time.Duration       `config:"idleConnTimeout"`
	DisableKeepAlives     bool                `config:"disableKeepAlives"`
	DisableCompression    bool                `config:"disableCompression"`
	ResponseHeaderTimeout time.Duration       `config:"responseHeaderTimeout"`
	ConnTimeout           time.Duration       `config:"connTimeout"`
	ConnBackoff           yarpcconfig.Backoff `config:"connBackoff"`
}

TransportConfig configures the shared HTTP Transport. This is shared between all HTTP outbounds and inbounds of a Dispatcher. 

transports:
  http:
    keepAlive: 30s
    maxIdleConns: 2
    maxIdleConnsPerHost: 2
    idleConnTimeout: 90s
    disableKeepAlives: false
    disableCompression: false
    responseHeaderTimeout: 0s
    connTimeout: 500ms
    connBackoff:
      exponential:
        first: 10ms
        max: 30s

All parameters of TransportConfig are optional. This section may be omitted in the transports section.

type TransportOption added in v1.0.0 

type TransportOption func(*transportOptions)

TransportOption customizes the behavior of an HTTP transport.

func ConnBackoff added in v1.10.0 

func ConnBackoff(s backoffapi.Strategy) TransportOption

ConnBackoff specifies the connection backoff strategy for delays between connection attempts for each peer.

The default is exponential backoff starting with 10ms fully jittered, doubling each attempt, with a maximum interval of 30s.

func ConnTimeout added in v1.10.0 

func ConnTimeout(d time.Duration) TransportOption

ConnTimeout is the time that the transport will wait for a connection attempt. If a peer has been retained by a peer list, connection attempts are performed in a goroutine off the request path.

The default is half a second.

func DialContext added in v1.40.0 

func DialContext(f func(ctx context.Context, network, addr string) (net.Conn, error)) TransportOption

DialContext specifies the dial function for creating TCP connections on the outbound. This will override the default dial context, which has a 30 second timeout and respects the KeepAlive option.

See https://golang.org/pkg/net/http/#Transport.DialContext for details.

func DisableCompression added in v1.28.0 

func DisableCompression() TransportOption

DisableCompression if true prevents the Transport from requesting compression with an "Accept-Encoding: gzip" request header when the Request contains no existing Accept-Encoding value. If the Transport requests gzip on its own and gets a gzipped response, it's transparently decoded in the Response.Body. However, if the user explicitly requested gzip it is not automatically uncompressed.

func DisableKeepAlives added in v1.28.0 

func DisableKeepAlives() TransportOption

DisableKeepAlives prevents re-use of TCP connections between different HTTP requests.

func IdleConnTimeout added in v1.28.0 

func IdleConnTimeout(t time.Duration) TransportOption

IdleConnTimeout is the maximum amount of time an idle (keep-alive) connection will remain idle before closing itself. Zero means no limit.

Defaults to 15 minutes.

func InnocenceWindow added in v1.32.0 

func InnocenceWindow(d time.Duration) TransportOption

InnocenceWindow is the duration after the peer connection management loop will suspend suspicion for a peer after successfully checking whether the peer is live with a fresh TCP connection.

The default innocence window is 5 seconds.

A timeout does not necessarily indicate that a peer is unavailable, but it could indicate that the connection is half-open, that the peer died without sending a TCP FIN packet. In this case, the peer connection management loop attempts to open a TCP connection in the background, once per innocence window, while suspicious of the connection, leaving the peer available until it fails.

func KeepAlive 

func KeepAlive(t time.Duration) TransportOption

KeepAlive specifies the keep-alive period for the network connection. If zero, keep-alives are disabled.

Defaults to 30 seconds.

func Logger added in v1.21.0 

func Logger(logger *zap.Logger) TransportOption

Logger sets a logger to use for internal logging.

The default is to not write any logs.

func MaxIdleConns added in v1.28.0 

func MaxIdleConns(i int) TransportOption

MaxIdleConns controls the maximum number of idle (keep-alive) connections across all hosts. Zero means no limit.

func MaxIdleConnsPerHost added in v1.6.0 

func MaxIdleConnsPerHost(i int) TransportOption

MaxIdleConnsPerHost specifies the number of idle (keep-alive) HTTP connections that will be maintained per host. Existing idle connections will be used instead of creating new HTTP connections.

Defaults to 2 connections.

func Meter added in v1.63.0 

func Meter(meter *metrics.Scope) TransportOption

Meter sets a meter to use for internal transport metrics.

The default is to not emit any metrics.

func OutboundTLSConfigProvider added in v1.67.0 

func OutboundTLSConfigProvider(provider yarpctls.OutboundTLSConfigProvider) TransportOption

OutboundTLSConfigProvider returns an TransportOption that provides the outbound TLS config provider.

func ResponseHeaderTimeout added in v1.28.0 

func ResponseHeaderTimeout(t time.Duration) TransportOption

ResponseHeaderTimeout if non-zero specifies the amount of time to wait for a server's response headers after fully writing the request (including its body, if any). This time does not include the time to read the response body.

func ServiceName added in v1.63.0 

func ServiceName(name string) TransportOption

ServiceName sets the name of the service used in transport logging and metrics.

func Tracer added in v1.0.0 

func Tracer(tracer opentracing.Tracer) TransportOption

Tracer configures a tracer for the transport and all its inbounds and outbounds.

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.