topology

package
v1.9.2 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Oct 4, 2022 License: Apache-2.0 Imports: 33 Imported by: 194

Documentation

Overview

Package topology contains types that handles the discovery, monitoring, and selection of servers. This package is designed to expose enough inner workings of service discovery and monitoring to allow low level applications to have fine grained control, while hiding most of the detailed implementation of the algorithms.

Index

Constants

View Source 
const (
	// MinSupportedMongoDBVersion is the version string for the lowest MongoDB version supported by the driver.
	MinSupportedMongoDBVersion = "2.6"
)

Variables

View Source 
var (
	// ErrServerClosed occurs when an attempt to Get a connection is made after
	// the server has been closed.
	ErrServerClosed = errors.New("server is closed")
	// ErrServerConnected occurs when at attempt to Connect is made after a server
	// has already been connected.
	ErrServerConnected = errors.New("server is connected")
)
View Source 
var ErrConnectionClosed = ConnectionError{ConnectionID: "<closed>", /* contains filtered or unexported fields */}

ErrConnectionClosed is returned from an attempt to use an already closed connection.

View Source 
var ErrPoolClosed = PoolError("attempted to check out a connection from closed connection pool")

ErrPoolClosed is returned when attempting to check out a connection from a closed pool.

View Source 
var ErrPoolNotPaused = PoolError("only a paused pool can be marked ready")

ErrPoolNotPaused is returned when attempting to mark a connection pool "ready" that is not currently "paused".

View Source 
var ErrServerSelectionTimeout = errors.New("server selection timeout")

ErrServerSelectionTimeout is returned from server selection when the server selection process took longer than allowed by the timeout.

View Source 
var ErrSubscribeAfterClosed = errors.New("cannot subscribe after closeConnection")

ErrSubscribeAfterClosed is returned when a user attempts to subscribe to a closed Server or Topology.

View Source 
var ErrTopologyClosed = errors.New("topology is closed")

ErrTopologyClosed is returned when a user attempts to call a method on a closed Topology.

View Source 
var ErrTopologyConnected = errors.New("topology is connected or connecting")

ErrTopologyConnected is returned whena user attempts to Connect to an already connected Topology.

View Source 
var ErrWrongPool = PoolError("connection does not belong to this pool")

ErrWrongPool is return when a connection is returned to a pool it doesn't belong to.

View Source 
var (
	// SupportedWireVersions is the range of wire versions supported by the driver.
	SupportedWireVersions = description.NewVersionRange(2, 15)
)

Functions

This section is empty.

Types

type Connection added in v1.1.0 

type Connection struct {
	// contains filtered or unexported fields
}

Connection implements the driver.Connection interface to allow reading and writing wire messages and the driver.Expirable interface to allow expiring.

func (*Connection) Address added in v1.1.0 

func (c *Connection) Address() address.Address

Address returns the address of this connection.

func (*Connection) Alive added in v1.1.0 

func (c *Connection) Alive() bool

Alive returns if the connection is still alive.

func (*Connection) Close added in v1.1.0 

func (c *Connection) Close() error

Close returns this connection to the connection pool. This method may not closeConnection the underlying socket.

func (*Connection) CompressWireMessage added in v1.1.0 

func (c *Connection) CompressWireMessage(src, dst []byte) ([]byte, error)

CompressWireMessage handles compressing the provided wire message using the underlying connection's compressor. The dst parameter will be overwritten with the new wire message. If there is no compressor set on the underlying connection, then no compression will be performed.

func (*Connection) Description added in v1.1.0 

func (c *Connection) Description() description.Server

Description returns the server description of the server this connection is connected to.

func (*Connection) Expire added in v1.1.0 

func (c *Connection) Expire() error

Expire closes this connection and will closeConnection the underlying socket.

func (*Connection) ID added in v1.1.0 

func (c *Connection) ID() string

ID returns the ID of this connection.

func (*Connection) LocalAddress added in v1.1.0 

func (c *Connection) LocalAddress() address.Address

LocalAddress returns the local address of the connection

func (*Connection) PinToCursor added in v1.6.0 

func (c *Connection) PinToCursor() error

PinToCursor updates this connection to reflect that it is pinned to a cursor.

func (*Connection) PinToTransaction added in v1.6.0 

func (c *Connection) PinToTransaction() error

PinToTransaction updates this connection to reflect that it is pinned to a transaction.

func (*Connection) ReadWireMessage added in v1.1.0 

func (c *Connection) ReadWireMessage(ctx context.Context, dst []byte) ([]byte, error)

ReadWireMessage handles reading a wire message from the underlying connection. The dst parameter will be overwritten with the new wire message.

func (Connection) ServerConnectionID added in v1.8.0 

func (c Connection) ServerConnectionID() *int32

func (*Connection) Stale added in v1.4.0 

func (c *Connection) Stale() bool

Stale returns if the connection is stale.

func (*Connection) UnpinFromCursor added in v1.6.0 

func (c *Connection) UnpinFromCursor() error

UnpinFromCursor updates this connection to reflect that it is no longer pinned to a cursor.

func (*Connection) UnpinFromTransaction added in v1.6.0 

func (c *Connection) UnpinFromTransaction() error

UnpinFromTransaction updates this connection to reflect that it is no longer pinned to a transaction.

func (*Connection) WriteWireMessage added in v1.1.0 

func (c *Connection) WriteWireMessage(ctx context.Context, wm []byte) error

WriteWireMessage handles writing a wire message to the underlying connection.

type ConnectionError added in v1.1.0 

type ConnectionError struct {
	ConnectionID string
	Wrapped      error
	// contains filtered or unexported fields
}

ConnectionError represents a connection error.

func (ConnectionError) Error added in v1.1.0 

func (e ConnectionError) Error() string

Error implements the error interface.

func (ConnectionError) Unwrap added in v1.4.0 

func (e ConnectionError) Unwrap() error

Unwrap returns the underlying error.

type ConnectionOption added in v1.1.0 

type ConnectionOption func(*connectionConfig)

ConnectionOption is used to configure a connection.

func WithCompressors added in v1.1.0 

func WithCompressors(fn func([]string) []string) ConnectionOption

WithCompressors sets the compressors that can be used for communication.

func WithConnectTimeout added in v1.1.0 

func WithConnectTimeout(fn func(time.Duration) time.Duration) ConnectionOption

WithConnectTimeout configures the maximum amount of time a dial will wait for a Connect to complete. The default is 30 seconds.

func WithConnectionLoadBalanced added in v1.6.0 

func WithConnectionLoadBalanced(fn func(bool) bool) ConnectionOption

WithConnectionLoadBalanced specifies whether or not the connection is to a server behind a load balancer.

func WithDialer added in v1.1.0 

func WithDialer(fn func(Dialer) Dialer) ConnectionOption

WithDialer configures the Dialer to use when making a new connection to MongoDB.

func WithDisableOCSPEndpointCheck added in v1.4.0 

func WithDisableOCSPEndpointCheck(fn func(bool) bool) ConnectionOption

WithDisableOCSPEndpointCheck specifies whether or the driver should perform non-stapled OCSP verification. If set to true, the driver will only check stapled responses and will continue the connection without reaching out to OCSP responders.

func WithHandshaker added in v1.1.0 

func WithHandshaker(fn func(Handshaker) Handshaker) ConnectionOption

WithHandshaker configures the Handshaker that wll be used to initialize newly dialed connections.

func WithIdleTimeout added in v1.1.0 

func WithIdleTimeout(fn func(time.Duration) time.Duration) ConnectionOption

WithIdleTimeout configures the maximum idle time to allow for a connection.

func WithMonitor added in v1.1.0 

func WithMonitor(fn func(*event.CommandMonitor) *event.CommandMonitor) ConnectionOption

WithMonitor configures a event for command monitoring.

func WithOCSPCache added in v1.4.0 

func WithOCSPCache(fn func(ocsp.Cache) ocsp.Cache) ConnectionOption

WithOCSPCache specifies a cache to use for OCSP verification.

func WithReadTimeout added in v1.1.0 

func WithReadTimeout(fn func(time.Duration) time.Duration) ConnectionOption

WithReadTimeout configures the maximum read time for a connection.

func WithTLSConfig added in v1.1.0 

func WithTLSConfig(fn func(*tls.Config) *tls.Config) ConnectionOption

WithTLSConfig configures the TLS options for a connection.

func WithWriteTimeout added in v1.1.0 

func WithWriteTimeout(fn func(time.Duration) time.Duration) ConnectionOption

WithWriteTimeout configures the maximum write time for a connection.

func WithZlibLevel added in v1.1.0 

func WithZlibLevel(fn func(*int) *int) ConnectionOption

WithZlibLevel sets the zLib compression level.

func WithZstdLevel added in v1.2.0 

func WithZstdLevel(fn func(*int) *int) ConnectionOption

WithZstdLevel sets the zstd compression level.

type Dialer added in v1.1.0 

type Dialer interface {
	DialContext(ctx context.Context, network, address string) (net.Conn, error)
}

Dialer is used to make network connections. 

var DefaultDialer Dialer = &net.Dialer{}

DefaultDialer is the Dialer implementation that is used by this package. Changing this will also change the Dialer used for this package. This should only be changed why all of the connections being made need to use a different Dialer. Most of the time, using a WithDialer option is more appropriate than changing this variable.

type DialerFunc added in v1.1.0 

type DialerFunc func(ctx context.Context, network, address string) (net.Conn, error)

DialerFunc is a type implemented by functions that can be used as a Dialer.

func (DialerFunc) DialContext added in v1.1.0 

func (df DialerFunc) DialContext(ctx context.Context, network, address string) (net.Conn, error)

DialContext implements the Dialer interface.

type Handshaker added in v1.1.0 

type Handshaker = driver.Handshaker

Handshaker is the interface implemented by types that can perform a MongoDB handshake over a provided driver.Connection. This is used during connection initialization. Implementations must be goroutine safe.

type MonitorMode 

type MonitorMode uint8

MonitorMode represents the way in which a server is monitored. 

const (
	AutomaticMode MonitorMode = iota
	SingleMode
)

These constants are the available monitoring modes.

type Option 

type Option func(*config) error

Option is a configuration option for a topology.

func WithConnString 

func WithConnString(fn func(connstring.ConnString) connstring.ConnString) Option

WithConnString configures the topology using the connection string.

func WithLoadBalanced added in v1.6.0 

func WithLoadBalanced(fn func(bool) bool) Option

WithLoadBalanced specifies whether or not the cluster is behind a load balancer.

func WithMode 

func WithMode(fn func(MonitorMode) MonitorMode) Option

WithMode configures the topology's monitor mode.

func WithReplicaSetName 

func WithReplicaSetName(fn func(string) string) Option

WithReplicaSetName configures the topology's default replica set name.

func WithSRVMaxHosts added in v1.8.0 

func WithSRVMaxHosts(fn func(int) int) Option

WithSRVMaxHosts specifies the SRV host limit that was used to create the topology.

func WithSRVServiceName added in v1.8.0 

func WithSRVServiceName(fn func(string) string) Option

WithSRVServiceName specifies the SRV service name that was used to create the topology.

func WithSeedList 

func WithSeedList(fn func(...string) []string) Option

WithSeedList configures a topology's seed list.

func WithServerOptions 

func WithServerOptions(fn func(...ServerOption) []ServerOption) Option

WithServerOptions configures a topology's server options for when a new server needs to be created.

func WithServerSelectionTimeout 

func WithServerSelectionTimeout(fn func(time.Duration) time.Duration) Option

WithServerSelectionTimeout configures a topology's server selection timeout. A server selection timeout of 0 means there is no timeout for server selection.

func WithTopologyServerMonitor added in v1.5.0 

func WithTopologyServerMonitor(fn func(*event.ServerMonitor) *event.ServerMonitor) Option

WithTopologyServerMonitor configures the monitor for all SDAM events

func WithURI added in v1.3.1 

func WithURI(fn func(string) string) Option

WithURI specifies the URI that was used to create the topology.

type PoolError added in v1.1.0 

type PoolError string

PoolError is an error returned from a Pool method.

func (PoolError) Error added in v1.1.0 

func (pe PoolError) Error() string

type SelectedServer 

type SelectedServer struct {
	*Server

	Kind description.TopologyKind
}

SelectedServer represents a specific server that was selected during server selection. It contains the kind of the topology it was selected from.

func (*SelectedServer) Description 

func (ss *SelectedServer) Description() description.SelectedServer

Description returns a description of the server as of the last heartbeat.

type Server 

type Server struct {
	// contains filtered or unexported fields
}

Server is a single server within a topology.

func ConnectServer 

func ConnectServer(addr address.Address, updateCallback updateTopologyCallback, topologyID primitive.ObjectID, opts ...ServerOption) (*Server, error)

ConnectServer creates a new Server and then initializes it using the Connect method.

func NewServer 

func NewServer(addr address.Address, topologyID primitive.ObjectID, opts ...ServerOption) *Server

NewServer creates a new server. The mongodb server at the address will be monitored on an internal monitoring goroutine.

func (*Server) Connect 

func (s *Server) Connect(updateCallback updateTopologyCallback) error

Connect initializes the Server by starting background monitoring goroutines. This method must be called before a Server can be used.

func (*Server) Connection 

func (s *Server) Connection(ctx context.Context) (driver.Connection, error)

Connection gets a connection to the server.

func (*Server) Description 

func (s *Server) Description() description.Server

Description returns a description of the server as of the last heartbeat.

func (*Server) Disconnect 

func (s *Server) Disconnect(ctx context.Context) error

Disconnect closes sockets to the server referenced by this Server. Subscriptions to this Server will be closed. Disconnect will shutdown any monitoring goroutines, closeConnection the idle connection pool, and will wait until all the in use connections have been returned to the connection pool and are closed before returning. If the context expires via cancellation, deadline, or timeout before the in use connections have been returned, the in use connections will be closed, resulting in the failure of any in flight read or write operations. If this method returns with no errors, all connections associated with this Server have been closed.

func (*Server) MinRTT added in v1.8.0 

func (s *Server) MinRTT() time.Duration

MinRTT returns the minimum round-trip time to the server observed over the last 5 minutes.

func (*Server) OperationCount added in v1.9.0 

func (s *Server) OperationCount() int64

OperationCount returns the current number of in-progress operations for this server.

func (*Server) ProcessError added in v1.1.0 

func (s *Server) ProcessError(err error, conn driver.Connection) driver.ProcessErrorResult

ProcessError handles SDAM error handling and implements driver.ErrorProcessor.

func (*Server) ProcessHandshakeError added in v1.3.5 

func (s *Server) ProcessHandshakeError(err error, startingGenerationNumber uint64, serviceID *primitive.ObjectID)

ProcessHandshakeError implements SDAM error handling for errors that occur before a connection finishes handshaking.

func (*Server) RequestImmediateCheck 

func (s *Server) RequestImmediateCheck()

RequestImmediateCheck will cause the server to send a heartbeat immediately instead of waiting for the heartbeat timeout.

func (*Server) SelectedDescription 

func (s *Server) SelectedDescription() description.SelectedServer

SelectedDescription returns a description.SelectedServer with a Kind of Single. This can be used when performing tasks like monitoring a batch of servers and you want to run one off commands against those servers.

func (*Server) String added in v0.3.0 

func (s *Server) String() string

String implements the Stringer interface.

func (*Server) Subscribe 

func (s *Server) Subscribe() (*ServerSubscription, error)

Subscribe returns a ServerSubscription which has a channel on which all updated server descriptions will be sent. The channel will have a buffer size of one, and will be pre-populated with the current description.

type ServerOption 

type ServerOption func(*serverConfig)

ServerOption configures a server.

func WithClock 

func WithClock(fn func(clock *session.ClusterClock) *session.ClusterClock) ServerOption

WithClock configures the ClusterClock for the server to use.

func WithCompressionOptions 

func WithCompressionOptions(fn func(...string) []string) ServerOption

WithCompressionOptions configures the server's compressors.

func WithConnectionOptions 

func WithConnectionOptions(fn func(...ConnectionOption) []ConnectionOption) ServerOption

WithConnectionOptions configures the server's connections.

func WithConnectionPoolMaintainInterval added in v1.9.0 

func WithConnectionPoolMaintainInterval(fn func(time.Duration) time.Duration) ServerOption

WithConnectionPoolMaintainInterval configures the interval that the background connection pool maintenance goroutine runs.

func WithConnectionPoolMaxIdleTime added in v1.1.0 

func WithConnectionPoolMaxIdleTime(fn func(time.Duration) time.Duration) ServerOption

WithConnectionPoolMaxIdleTime configures the maximum time that a connection can remain idle in the connection pool before being removed. If connectionPoolMaxIdleTime is 0, then no idle time is set and connections will not be removed because of their age

func WithConnectionPoolMonitor added in v1.1.0 

func WithConnectionPoolMonitor(fn func(*event.PoolMonitor) *event.PoolMonitor) ServerOption

WithConnectionPoolMonitor configures the monitor for all connection pool actions

func WithHeartbeatInterval 

func WithHeartbeatInterval(fn func(time.Duration) time.Duration) ServerOption

WithHeartbeatInterval configures a server's heartbeat interval.

func WithHeartbeatTimeout 

func WithHeartbeatTimeout(fn func(time.Duration) time.Duration) ServerOption

WithHeartbeatTimeout configures how long to wait for a heartbeat socket to connection.

func WithMaxConnecting added in v1.8.2 

func WithMaxConnecting(fn func(uint64) uint64) ServerOption

WithMaxConnecting configures the maximum number of connections a connection pool may establish simultaneously. If maxConnecting is 0, the default value of 2 is used.

func WithMaxConnections 

func WithMaxConnections(fn func(uint64) uint64) ServerOption

WithMaxConnections configures the maximum number of connections to allow for a given server. If max is 0, then maximum connection pool size is not limited.

func WithMinConnections added in v1.1.0 

func WithMinConnections(fn func(uint64) uint64) ServerOption

WithMinConnections configures the minimum number of connections to allow for a given server. If min is 0, then there is no lower limit to the number of connections.

func WithRegistry 

func WithRegistry(fn func(*bsoncodec.Registry) *bsoncodec.Registry) ServerOption

WithRegistry configures the registry for the server to use when creating cursors.

func WithServerAPI added in v1.6.0 

func WithServerAPI(fn func(serverAPI *driver.ServerAPIOptions) *driver.ServerAPIOptions) ServerOption

WithServerAPI configures the server API options for the server to use.

func WithServerAppName added in v1.2.0 

func WithServerAppName(fn func(string) string) ServerOption

WithServerAppName configures the server's application name.

func WithServerLoadBalanced added in v1.6.0 

func WithServerLoadBalanced(fn func(bool) bool) ServerOption

WithServerLoadBalanced specifies whether or not the server is behind a load balancer.

func WithServerMonitor added in v1.5.0 

func WithServerMonitor(fn func(*event.ServerMonitor) *event.ServerMonitor) ServerOption

WithServerMonitor configures the monitor for all SDAM events for a server

type ServerSelectionError added in v1.5.0 

type ServerSelectionError struct {
	Desc    description.Topology
	Wrapped error
}

ServerSelectionError represents a Server Selection error.

func (ServerSelectionError) Error added in v1.5.0 

func (e ServerSelectionError) Error() string

Error implements the error interface.

func (ServerSelectionError) Unwrap added in v1.5.0 

func (e ServerSelectionError) Unwrap() error

Unwrap returns the underlying error.

type ServerSubscription 

type ServerSubscription struct {
	C <-chan description.Server
	// contains filtered or unexported fields
}

ServerSubscription represents a subscription to the description.Server updates for a specific server.

func (*ServerSubscription) Unsubscribe 

func (ss *ServerSubscription) Unsubscribe() error

Unsubscribe unsubscribes this ServerSubscription from updates and closes the subscription channel.

type Topology 

type Topology struct {
	// contains filtered or unexported fields
}

Topology represents a MongoDB deployment.

func New 

func New(opts ...Option) (*Topology, error)

New creates a new topology.

func (*Topology) Connect 

func (t *Topology) Connect() error

Connect initializes a Topology and starts the monitoring process. This function must be called to properly monitor the topology.

func (*Topology) Description 

func (t *Topology) Description() description.Topology

Description returns a description of the topology.

func (*Topology) Disconnect 

func (t *Topology) Disconnect(ctx context.Context) error

Disconnect closes the topology. It stops the monitoring thread and closes all open subscriptions.

func (*Topology) FindServer 

func (t *Topology) FindServer(selected description.Server) (*SelectedServer, error)

FindServer will attempt to find a server that fits the given server description. This method will return nil, nil if a matching server could not be found.

func (*Topology) Kind added in v1.1.0 

func (t *Topology) Kind() description.TopologyKind

Kind returns the topology kind of this Topology.

func (*Topology) RequestImmediateCheck 

func (t *Topology) RequestImmediateCheck()

RequestImmediateCheck will send heartbeats to all the servers in the topology right away, instead of waiting for the heartbeat timeout.

func (*Topology) SelectServer 

func (t *Topology) SelectServer(ctx context.Context, ss description.ServerSelector) (driver.Server, error)

SelectServer selects a server with given a selector. SelectServer complies with the server selection spec, and will time out after severSelectionTimeout or when the parent context is done.

func (*Topology) String added in v0.3.0 

func (t *Topology) String() string

String implements the Stringer interface

func (*Topology) Subscribe 

func (t *Topology) Subscribe() (*driver.Subscription, error)

Subscribe returns a Subscription on which all updated description.Topologys will be sent. The channel of the subscription will have a buffer size of one, and will be pre-populated with the current description.Topology. Subscribe implements the driver.Subscriber interface.

func (*Topology) Unsubscribe added in v1.2.0 

func (t *Topology) Unsubscribe(sub *driver.Subscription) error

Unsubscribe unsubscribes the given subscription from the topology and closes the subscription channel. Unsubscribe implements the driver.Subscriber interface.

type WaitQueueTimeoutError added in v1.4.6 

type WaitQueueTimeoutError struct {
	Wrapped                      error
	PinnedCursorConnections      uint64
	PinnedTransactionConnections uint64
	// contains filtered or unexported fields
}

WaitQueueTimeoutError represents a timeout when requesting a connection from the pool

func (WaitQueueTimeoutError) Error added in v1.4.6 

func (w WaitQueueTimeoutError) Error() string

Error implements the error interface.

func (WaitQueueTimeoutError) Unwrap added in v1.4.6 

func (w WaitQueueTimeoutError) Unwrap() error

Unwrap returns the underlying error.

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.