midi

package module
v2.2.7 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Jul 30, 2024 License: MIT Imports: 8 Imported by: 136

Documentation

Overview

Package midi helps with reading and writing of MIDI messages.

A `Message` is a slice of bytes with some methods to get the data. Any complete midi message (i.e. without "running status") can be interpreted as a Message, by converting the type. The data can be retrieved with the corresponding Get* method. 

// the raw bytes for a noteon message on channel 1 (2nd channel) for the key 60 with velocity of 120
var b = []byte{0x91, 0x3C, 0x78}

// convert to Message type
msg := midi.Message(b)

var channel, key, velocity uint8
if msg.GetNoteOn(&channel, &key, &velocity) {
  fmt.Printf("got %s: channel: %v key: %v, velocity: %v\n", msg.Type(), channel, key, velocity)
}

Received messages can be categorized by their type, e.g. 

switch msg.Type() {
case midi.NoteOnMsg, midi.NoteOffMsg:
  // do something
case midi.ControlChangeMsg:
  // do some other thing
default:
  if msg.Is(midi.RealTimeMsg) || msg.Is(midi.SysCommonMsg) || msg.Is(midi.SysExMsg) {
    // ignore
  }
}

A new message is created by the corresponding function, e.g. 

msg := midi.NoteOn(1, 60, 120) // channel, key, velocity
fmt.Printf("% X\n", []byte(msg)) // prints 91 3C 78

Sending and retrieving of midi data is done via drivers. The drivers take care of converting a "running status" into a full status. Most of the time, a single driver is sufficient. Therefor it is handy, that the drivers autoregister themself. This also makes it easy to exchange a driver if needed (see the example).

Different cross plattform implementations of the `Driver` interface can be found in the `drivers` subdirectory.

The `smf` subpackage helps with writing to and reading from `Simple MIDI Files` (SMF) (see https://pkg.go.dev/gitlab.com/gomidi/midi/v2/smf).

The `tools` subdirectory provides command line tools and libraries based on this library.

Example 
var eachMessage = func(msg Message, timestampms int32) {
	if msg.Is(RealTimeMsg) {
		// ignore realtime messages
		return
	}
	var channel, key, velocity, cc, val, prog uint8
	switch {

	// is better, than to use GetNoteOn (handles note on messages with velocity of 0 as expected)
	case msg.GetNoteStart(&channel, &key, &velocity):
		fmt.Printf("note started channel: %v key: %v (%s) velocity: %v\n", channel, key, Note(key), velocity)

	// is better, than to use GetNoteOff (handles note on messages with velocity of 0 as expected)
	case msg.GetNoteEnd(&channel, &key):
		fmt.Printf("note ended channel: %v key: %v (%s)\n", channel, key, Note(key))

	case msg.GetControlChange(&channel, &cc, &val):
		fmt.Printf("control change %v (%s) channel: %v value: %v\n", cc, ControlChangeName[cc], channel, val)

	case msg.GetProgramChange(&channel, &prog):
		fmt.Printf("program change %v (%s) channel: %v\n", prog, gm.Instr(prog), channel)

	default:
		fmt.Printf("%s\n", msg)
	}
}

// always good to close the driver at the end
defer CloseDriver()

// allows you to get the ports when using "real" drivers like rtmididrv or portmididrv
if len(os.Args) == 2 && os.Args[1] == "list" {
	fmt.Printf("MIDI IN Ports\n")
	fmt.Println(GetInPorts())
	fmt.Printf("\n\nMIDI OUT Ports\n")
	fmt.Println(GetOutPorts())
	fmt.Printf("\n\n")
	return
}

var out, _ = OutPort(0)
// takes the first out port, for real, consider
// var out = OutByName("my synth")

// creates a sender function to the out port
send, _ := SendTo(out)

var in, _ = InPort(0)
// here we take first in port, for real, consider
// var in = InByName("my midi keyboard")

// listens to the in port and calls eachMessage for every message.
// any running status bytes are converted and only complete messages are passed to the eachMessage.
stop, _ := ListenTo(in, eachMessage)

{ // send some messages
	send(NoteOn(0, Db(5), 100))
	send(NoteOff(0, Db(5)))
	send(Pitchbend(0, -12))
	send(ProgramChange(1, gm.Instr_AcousticBass.Value()))
	send(ControlChange(2, FootPedalMSB, On))
}

// stops listening
stop()

Output:

note started channel: 0 key: 61 (Db5) velocity: 100
note ended channel: 0 key: 61 (Db5)
PitchBend channel: 0 pitch: -12 (8180)
program change 32 (AcousticBass) channel: 1
control change 4 (Foot Pedal (MSB)) channel: 2 value: 127

Index

Examples

Constants

View Source 
const (
	Off uint8 = 0   // value meaning "off"
	On  uint8 = 127 // value meaning "on"

	BankSelectMSB             uint8 = 0
	ModulationWheelMSB        uint8 = 1
	BreathControllerMSB       uint8 = 2
	FootPedalMSB              uint8 = 4
	PortamentoTimeMSB         uint8 = 5
	DataEntryMSB              uint8 = 6
	VolumeMSB                 uint8 = 7
	BalanceMSB                uint8 = 8
	PanPositionMSB            uint8 = 10
	ExpressionMSB             uint8 = 11
	EffectControl1MSB         uint8 = 12
	EffectControl2MSB         uint8 = 13
	GeneralPurposeSlider1     uint8 = 16
	GeneralPurposeSlider2     uint8 = 17
	GeneralPurposeSlider3     uint8 = 18
	GeneralPurposeSlider4     uint8 = 19
	BankSelectLSB             uint8 = 32
	ModulationWheelLSB        uint8 = 33
	BreathControllerLSB       uint8 = 34
	FootPedalLSB              uint8 = 36
	PortamentoTimeLSB         uint8 = 37
	DataEntryLSB              uint8 = 38
	VolumeLSB                 uint8 = 39
	BalanceLSB                uint8 = 40
	PanPositionLSB            uint8 = 42
	ExpressionLSB             uint8 = 43
	EffectControl1LSB         uint8 = 44
	EffectControl2LSB         uint8 = 45
	SoundVariation            uint8 = 70
	SoundTimbre               uint8 = 71
	SoundReleaseTime          uint8 = 72
	SoundAttackTime           uint8 = 73
	SoundBrightness           uint8 = 74
	SoundControl6             uint8 = 75
	SoundControl7             uint8 = 76
	SoundControl8             uint8 = 77
	SoundControl9             uint8 = 78
	SoundControl10            uint8 = 79
	EffectsLevel              uint8 = 91
	TremuloLevel              uint8 = 92
	ChorusLevel               uint8 = 93
	CelesteLevel              uint8 = 94
	PhaserLevel               uint8 = 95
	DataButtonIncrement       uint8 = 96
	DataButtonDecrement       uint8 = 97
	NonRegisteredParameterLSB uint8 = 98
	NonRegisteredParameterMSB uint8 = 99
	RegisteredParameterLSB    uint8 = 100
	RegisteredParameterMSB    uint8 = 101

	AllSoundOff       uint8 = 120 // send it with value of 0/Off
	AllControllersOff uint8 = 121 // send it with value of 0/Off
	AllNotesOff       uint8 = 123 // send it with value of 0/Off

	OmniModeOff uint8 = 124 // send it with value of 0/Off
	OmniModeOn  uint8 = 125 // send it with value of 0

	MonoOperation uint8 = 126

	PolyOperation uint8 = 127 // send it with value of 0

	LocalKeyboardSwitch  uint8 = 122 // send it with value of 127/On or 0/Off
	HoldPedalSwitch      uint8 = 64  // send it with value of 127/On or 0/Off
	PortamentoSwitch     uint8 = 65  // send it with value of 127/On or 0/Off
	SustenutoPedalSwitch uint8 = 66  // send it with value of 127/On or 0/Off

	SoftPedalSwitch             uint8 = 67 // send it with value of 127/On or 0/Off
	LegatoPedalSwitch           uint8 = 68 // send it with value of 127/On or 0/Off
	Hold2PedalSwitch            uint8 = 69 // send it with value of 127/On or 0/Off
	GeneralPurposeButton1Switch uint8 = 80 // send it with value of 127/On or 0/Off
	GeneralPurposeButton2Switch uint8 = 81 // send it with value of 127/On or 0/Off
	GeneralPurposeButton3Switch uint8 = 82 // send it with value of 127/On or 0/Off
	GeneralPurposeButton4Switch uint8 = 83 // send it with value of 127/On or 0/Off
)
View Source 
const (
	// PitchReset is the pitch bend value to reset the pitch wheel to zero
	PitchReset = 0

	// PitchLowest is the lowest possible value of the pitch bending
	PitchLowest = -8192

	// PitchHighest is the highest possible value of the pitch bending
	PitchHighest = 8191
)

Variables

View Source 
var ControlChangeName = map[uint8]string{
	0:   "Bank Select (MSB)",
	1:   "Modulation Wheel (MSB)",
	2:   "Breath controller (MSB)",
	4:   "Foot Pedal (MSB)",
	5:   "Portamento Time (MSB)",
	6:   "Data Entry (MSB)",
	7:   "Volume (MSB)",
	8:   "Balance (MSB)",
	10:  "Pan position (MSB)",
	11:  "Expression (MSB)",
	12:  "Effect Control 1 (MSB)",
	13:  "Effect Control 2 (MSB)",
	16:  "General Purpose Slider 1",
	17:  "General Purpose Slider 2",
	18:  "General Purpose Slider 3",
	19:  "General Purpose Slider 4",
	32:  "Bank Select (LSB)",
	33:  "Modulation Wheel (LSB)",
	34:  "Breath controller (LSB)",
	36:  "Foot Pedal (LSB)",
	37:  "Portamento Time (LSB)",
	38:  "Data Entry (LSB)",
	39:  "Volume (LSB)",
	40:  "Balance (LSB)",
	42:  "Pan position (LSB)",
	43:  "Expression (LSB)",
	44:  "Effect Control 1 (LSB)",
	45:  "Effect Control 2 (LSB)",
	64:  "Hold Pedal (on/off)",
	65:  "Portamento (on/off)",
	66:  "Sustenuto Pedal (on/off)",
	67:  "Soft Pedal (on/off)",
	68:  "Legato Pedal (on/off)",
	69:  "Hold 2 Pedal (on/off)",
	70:  "Sound Variation",
	71:  "Sound Timbre",
	72:  "Sound Release Time",
	73:  "Sound Attack Time",
	74:  "Sound Brightness",
	75:  "Sound Control 6",
	76:  "Sound Control 7",
	77:  "Sound Control 8",
	78:  "Sound Control 9",
	79:  "Sound Control 10",
	80:  "General Purpose Button 1 (on/off)",
	81:  "General Purpose Button 2 (on/off)",
	82:  "General Purpose Button 3 (on/off)",
	83:  "General Purpose Button 4 (on/off)",
	91:  "Effects Level",
	92:  "Tremulo Level",
	93:  "Chorus Level",
	94:  "Celeste Level",
	95:  "Phaser Level",
	96:  "Data Button increment",
	97:  "Data Button decrement",
	98:  "Non-registered Parameter (LSB)",
	99:  "Non-registered Parameter (MSB)",
	100: "Registered Parameter (LSB)",
	101: "Registered Parameter (MSB)",
	120: "All Sound Off",
	121: "All Controllers Off",
	122: "Local Keyboard (on/off)",
	123: "All Notes Off",
	124: "Omni Mode Off",
	125: "Omni Mode On",
	126: "Mono Operation",
	127: "Poly Operation",
}

stolen from http://midi.teragonaudio.com/tech/midispec.htm

View Source 
var ErrListenStopped = drivers.ErrListenStopped
View Source 
var ErrPortClosed = drivers.ErrPortClosed

Functions

func A 

func A(oct uint8) uint8

A returns the key for the MIDI note A in the given octave

func Ab 

func Ab(oct uint8) uint8

Ab returns the key for the MIDI note Ab in the given octave

func AddTypeName 

func AddTypeName(m Type, name string) bool

AddTypeName adds names for new types that are not part of this package (e.g. meta types from the smf package). Don't use this function as a user, it is only internal to the library. Returns false, if the type already has been named, and true on success.

func B 

func B(oct uint8) uint8

B returns the key for the MIDI note B in the given octave

func Bb 

func Bb(oct uint8) uint8

Bb returns the key for the MIDI note Bb in the given octave

func C 

func C(oct uint8) uint8

C returns the key for the MIDI note C in the given octave

func CloseDriver 

func CloseDriver()

CloseDriver closes the default driver.

func D 

func D(oct uint8) uint8

D returns the key for the MIDI note D in the given octave

func Db 

func Db(oct uint8) uint8

Db returns the key for the MIDI note Db in the given octave

func E 

func E(oct uint8) uint8

E returns the key for the MIDI note E in the given octave

func Eb 

func Eb(oct uint8) uint8

Eb returns the key for the MIDI note Eb in the given octave

func F 

func F(oct uint8) uint8

F returns the key for the MIDI note F in the given octave

func FindInPort 

func FindInPort(name string) (drivers.In, error)

FindInPort returns the midi in port that contains the given name and an error, if the port can't be found.

func FindOutPort 

func FindOutPort(name string) (drivers.Out, error)

FindOutPort returns the midi out port that contains the given name and an error, if the port can't be found.

func G 

func G(oct uint8) uint8

G returns the key for the MIDI note G in the given octave

func Gb 

func Gb(oct uint8) uint8

Gb returns the key for the MIDI note Gb in the given octave

func InPort added in v2.0.17 

func InPort(portnumber int) (drivers.In, error)

InPort returns the midi in port for the given port number

func ListenTo 

func ListenTo(inPort drivers.In, recv func(msg Message, timestampms int32), opts ...Option) (stop func(), err error)

ListenTo listens on the given port and passes the received MIDI data to the given receiver. It returns a stop function that may be called to stop the listening.

func OutPort added in v2.0.17 

func OutPort(portnumber int) (drivers.Out, error)

OutPort returns the midi out port for the given port number

func SendTo 

func SendTo(outPort drivers.Out) (func(msg Message) error, error)

SendTo returns a function that can be used to send messages to the given midi port.

Types

type InPorts 

type InPorts []drivers.In

func GetInPorts added in v2.0.17 

func GetInPorts() InPorts

GetInPorts returns the MIDI input ports

func (InPorts) String added in v2.0.17 

func (ip InPorts) String() string

type Interval added in v2.0.23 

type Interval int8
const (
	Unison            Interval = 0
	MinorSecond       Interval = 1
	MajorSecond       Interval = 2
	MinorThird        Interval = 3
	MajorThird        Interval = 4
	Fourth            Interval = 5
	Tritone           Interval = 6
	Fifth             Interval = 7
	MinorSixth        Interval = 8
	MajorSixth        Interval = 9
	MinorSeventh      Interval = 10
	MajorSeventh      Interval = 11
	Octave            Interval = 12
	MinorNinth        Interval = 13
	MajorNinth        Interval = 14
	MinorTenth        Interval = 15
	MajorTenth        Interval = 16
	Eleventh          Interval = 17
	DiminishedTwelfth Interval = 18
	Twelfth           Interval = 19
	MinorThirteenth   Interval = 20
	MajorThirteenth   Interval = 21
	MinorFourteenth   Interval = 22
	MajorFourteenth   Interval = 23
	DoubleOctave      Interval = 24
)

func (Interval) String added in v2.0.23 

func (i Interval) String() string

type Message 

type Message []byte

Message is a complete midi message (not including meta messages)

func Activesense 

func Activesense() Message

Activesense returns an active sensing message

func AfterTouch 

func AfterTouch(channel, pressure uint8) Message

AfterTouch returns an aftertouch message.

func Continue 

func Continue() Message

Continue returns a continue message

func ControlChange 

func ControlChange(channel, controller, value uint8) Message

ControlChange returns a control change message.

func MTC 

func MTC(m uint8) Message

MTC returns a timing code message (quarter frame)

func NoteOff 

func NoteOff(channel, key uint8) Message

NoteOff returns a note off message.

func NoteOffVelocity 

func NoteOffVelocity(channel, key, velocity uint8) Message

NoteOffVelocity returns a note off message with velocity.

func NoteOn 

func NoteOn(channel, key, velocity uint8) Message

NoteOn returns a note on message.

func Pitchbend 

func Pitchbend(channel uint8, value int16) Message

Pitchbend returns a pitch bend message. If value is > 8191 (max), it will be set to 8191. If value is < -8192, it will be set to -8192. A value of 0 is considered as neutral position.

func PolyAfterTouch 

func PolyAfterTouch(channel, key, pressure uint8) Message

PolyAfterTouch returns a polyphonic aftertouch message.

func ProgramChange 

func ProgramChange(channel, program uint8) Message

ProgramChange returns a program change message.

func ReadChannelMessage 

func ReadChannelMessage(status byte, arg1 byte, rd io.Reader) (m Message, err error)

ReadChannelMessage reads a channel message for the given status byte from the given reader. Don't use this function as a user, it is only internal to the library.

func Reset 

func Reset() Message

Reset returns a reset message

func ResetChannel added in v2.0.8 

func ResetChannel(ch uint8, bank uint8, prog uint8) []Message

ResetChannel "resets" channel to some established defaults 

bank select -> bank
program change -> prog
cc all controllers off
cc volume -> 100
cc expression -> 127
cc hold pedal -> off
cc pan position -> 64
cc RPN pitch bend sensitivity -> 2 (semitones)

func SPP 

func SPP(pointer uint16) Message

SPP returns a song position pointer message

func SilenceChannel added in v2.0.8 

func SilenceChannel(ch int8) (out []Message)

SilenceChannel sends a note off message for every running note on the given channel. If the channel is -1, every channel is affected. If note consolidation is switched off, notes aren't tracked and therefor every possible note will get a note off. This could also be enforced by setting force to true. If force is true, additionally the cc messages AllNotesOff (123) and AllSoundOff (120) are send. If channel is > 15, the method panics. The error or not error of the last write is returned. (i.e. it does not return on the first error, but tries everything instead to make it silent)

func SongSelect 

func SongSelect(song uint8) Message

SongSelect returns a song select message

func Start 

func Start() Message

Start returns a start message

func Stop 

func Stop() Message

Stop returns a stop message

func SysEx 

func SysEx(bt []byte) (m Message)

SysEx returns a system exclusive message. Only the inner bytes must be passed, the bytes that represent the start and end of a sysex message are added.

func Tick 

func Tick() Message

Tick returns a tick message

func TimingClock 

func TimingClock() Message

TimingClock returns a timing clock message

func Tune 

func Tune() Message

Tune returns a tune message

func (Message) Bytes 

func (m Message) Bytes() []byte

Bytes returns the underlying bytes of the message.

func (Message) GetAfterTouch 

func (m Message) GetAfterTouch(channel, pressure *uint8) (is bool)

GetAfterTouch returns true if (and only if) the message is a AfterTouchMsg. Then it also extracts the data to the given arguments. Only arguments that are not nil are parsed and filled.

func (Message) GetChannel 

func (m Message) GetChannel(channel *uint8) (is bool)

GetChannel returns true if (and only if) the message is a ChannelMsg. Then it also extracts the channel to the given argument. Only arguments that are not nil are parsed and filled.

func (Message) GetControlChange 

func (m Message) GetControlChange(channel, controller, value *uint8) (is bool)

GetControlChange returns true if (and only if) the message is a ControlChangeMsg. Then it also extracts the data to the given arguments. Only arguments that are not nil are parsed and filled.

func (Message) GetMTC 

func (m Message) GetMTC(quarterframe *uint8) (is bool)

GetMTC returns true if (and only if) the message is a MTCMsg. Then it also extracts the data to the given arguments. Only arguments that are not nil are parsed and filled.

func (Message) GetNoteEnd 

func (m Message) GetNoteEnd(channel, key *uint8) (is bool)

GetNoteEnd returns true if (and only if) the message is a NoteOnMsg with a velocity == 0 or a NoteOffMsg. Then it also extracts the data to the given arguments. Only arguments that are not nil are parsed and filled.

func (Message) GetNoteOff 

func (m Message) GetNoteOff(channel, key, velocity *uint8) (is bool)

GetNoteOff returns true if (and only if) the message is a NoteOffMsg. Then it also extracts the data to the given arguments. Only arguments that are not nil are parsed and filled.

func (Message) GetNoteOn 

func (m Message) GetNoteOn(channel, key, velocity *uint8) (is bool)

GetNoteOn returns true if (and only if) the message is a NoteOnMsg. Then it also extracts the data to the given arguments. Only arguments that are not nil are parsed and filled.

func (Message) GetNoteStart 

func (m Message) GetNoteStart(channel, key, velocity *uint8) (is bool)

GetNoteStart returns true if (and only if) the message is a NoteOnMsg with a velocity > 0. Then it also extracts the data to the given arguments. Only arguments that are not nil are parsed and filled.

func (Message) GetPitchBend 

func (m Message) GetPitchBend(channel *uint8, relative *int16, absolute *uint16) (is bool)

GetPitchBend returns true if (and only if) the message is a PitchBendMsg. Then it also extracts the data to the given arguments. Either relative or absolute may be nil, if not needed. Only arguments that are not nil are parsed and filled.

func (Message) GetPolyAfterTouch 

func (m Message) GetPolyAfterTouch(channel, key, pressure *uint8) (is bool)

GetPolyAfterTouch returns true if (and only if) the message is a PolyAfterTouchMsg. Then it also extracts the data to the given arguments. Only arguments that are not nil are parsed and filled.

func (Message) GetProgramChange 

func (m Message) GetProgramChange(channel, program *uint8) (is bool)

GetProgramChange returns true if (and only if) the message is a ProgramChangeMsg. Then it also extracts the data to the given arguments. Only arguments that are not nil are parsed and filled.

func (Message) GetSPP 

func (m Message) GetSPP(spp *uint16) (is bool)

GetSPP returns true if (and only if) the message is a SPPMsg. Then it also extracts the spp to the given argument. Only arguments that are not nil are parsed and filled.

func (Message) GetSongSelect 

func (m Message) GetSongSelect(song *uint8) (is bool)

GetSongSelect returns true if (and only if) the message is a SongSelectMsg. Then it also extracts the song number to the given argument. Only arguments that are not nil are parsed and filled.

func (Message) GetSysEx 

func (m Message) GetSysEx(bt *[]byte) bool

GetSysEx returns true, if the message is a sysex message. Then it extracts the inner bytes to the given slice.

func (Message) Is 

func (m Message) Is(t Type) bool

Is returns true, if the message is of the given type.

func (Message) IsOneOf 

func (m Message) IsOneOf(checkers ...Type) bool

IsOneOf returns true, if the message has one of the given types.

func (Message) IsPlayable 

func (m Message) IsPlayable() bool

IsPlayable returns, if the message can be send to an instrument.

func (Message) String 

func (m Message) String() string

String represents the Message as a string that contains the Type and its properties.

func (Message) Type 

func (m Message) Type() Type

Type returns the type of the message.

type Note 

type Note uint8

func (Note) Base added in v2.0.23 

func (n Note) Base() uint8

func (Note) Interval added in v2.0.23 

func (n Note) Interval(o Note) Interval

func (Note) Is 

func (n Note) Is(o Note) bool

Equal returns true if noteX is the same as noteY they may be in different octaves.

func (Note) Name 

func (n Note) Name() (name string)

func (Note) Octave 

func (n Note) Octave() uint8

func (Note) String 

func (n Note) String() string

func (Note) Transpose added in v2.0.23 

func (n Note) Transpose(i Interval) Note

func (Note) Value 

func (n Note) Value() uint8

type Option 

type Option func(*listeningOptions)

Option is an option for listening

func HandleError 

func HandleError(cb func(error)) Option

HandleError sets an error handler when receiving messages

func SysExBufferSize 

func SysExBufferSize(size uint32) Option

SysExBufferSize is an option to set the buffer size for sysex messages

func UseActiveSense 

func UseActiveSense() Option

UseActiveSense is an option to receive active sense messages

func UseSysEx 

func UseSysEx() Option

UseSysEx is an option to receive system exclusive messages

func UseTimeCode 

func UseTimeCode() Option

UseTimeCode is an option to receive time code messages

type OutPorts 

type OutPorts []drivers.Out

func GetOutPorts added in v2.0.17 

func GetOutPorts() OutPorts

GetOutPorts returns the MIDI output ports

func (OutPorts) String added in v2.0.17 

func (op OutPorts) String() string

type Type 

type Type int8

Type is the type of a midi message 

const (
	// UnknownMsg is an invalid or unknown MIDI message
	UnknownMsg Type = 0

	// RealTimeMsg is a MIDI realtime message. It can only be used over the wire.
	RealTimeMsg Type = -1

	// SysCommonMsg is a MIDI system common message. It can only be used over the wire.
	SysCommonMsg Type = -2

	// ChannelMsg is a MIDI channel message. It can be used in SMF and over the wire.
	ChannelMsg Type = -3

	// SysExMsg is a MIDI system exclusive message. It can be used in SMF and over the wire.
	SysExMsg Type = -4
)
const (

	// Tick is a MIDI tick realtime message (which is a RealTimeMsg).
	// There is no further data associated with messages of this type.
	TickMsg Type = 1 + iota

	// TimingClock is a MIDI timing clock realtime message (which is a RealTimeMsg).
	// There is no further data associated with messages of this type.
	TimingClockMsg

	// Start is a MIDI start realtime message (which is a RealTimeMsg).
	// There is no further data associated with messages of this type.
	StartMsg

	// Continue is a MIDI continue realtime message (which is a RealTimeMsg).
	// There is no further data associated with messages of this type.
	ContinueMsg

	// Stop is a MIDI stop realtime message (which is a RealTimeMsg).
	// There is no further data associated with messages of this type.
	StopMsg

	// ActiveSense is a MIDI active sense realtime message (which is a RealTimeMsg).
	// There is no further data associated with messages of this type.
	ActiveSenseMsg

	// Reset is a MIDI reset realtime message (which is a RealTimeMsg).
	// There is no further data associated with messages of this type.
	ResetMsg

	// NoteOn is a MIDI note on message (which is a ChannelMsg).
	// The channel of a concrete Message of this type can be retrieved via the Channel method of the Message.
	// The velocity of a concrete Message of this type can be retrieved via the Velocity method of the Message.
	// The key of a concrete Message of this type can be retrieved via the Key method of the Message.
	NoteOnMsg

	// NoteOff is a MIDI note off message (which is a ChannelMsg).
	// The channel of a concrete Message of this type can be retrieved via the Channel method of the Message.
	// The velocity of a concrete Message of this type can be retrieved via the Velocity method of the Message.
	// The key of a concrete Message of this type can be retrieved via the Key method of the Message.
	NoteOffMsg

	// ControlChange is a MIDI control change message (which is a ChannelMsg).
	// The channel of a concrete Message of this type can be retrieved via the Channel method of the Message.
	// The controller of a concrete Message of this type can be retrieved via the Controller method of the Message.
	// The change of a concrete Message of this type can be retrieved via the Change method of the Message.
	ControlChangeMsg

	// PitchBend is a MIDI pitch bend message (which is a ChannelMsg).
	// The channel of a concrete Message of this type can be retrieved via the Channel method of the Message.
	// The absolute and releative pitch of a concrete Message of this type can be retrieved via the Pitch method of the Message.
	PitchBendMsg

	// AfterTouch is a MIDI after touch message (which is a ChannelMsg).
	// The channel of a concrete Message of this type can be retrieved via the Channel method of the Message.
	// The pressure of a concrete Message of this type can be retrieved via the Pressure method of the Message.
	AfterTouchMsg

	// PolyAfterTouch is a polyphonic MIDI after touch message (which is a ChannelMsg).
	// The channel of a concrete Message of this type can be retrieved via the Channel method of the Message.
	// The key of a concrete Message of this type can be retrieved via the Key method of the Message.
	// The pressure of a concrete Message of this type can be retrieved via the Pressure method of the Message.
	PolyAfterTouchMsg

	// ProgramChange is a MIDI program change message (which is a ChannelMsg).
	// The channel of a concrete Message of this type can be retrieved via the Channel method of the Message.
	// The program number of a concrete Message of this type can be retrieved via the Program method of the Message.
	ProgramChangeMsg

	// MTC is a MIDI MTC system common message.
	// TODO add method to Message to get the quarter frame and document it.
	MTCMsg

	// SongSelect is a MIDI song select system common message.
	// TODO add method to Message to get the song number and document it.
	SongSelectMsg

	// SPP is a MIDI song position pointer (SPP) system common message.
	// TODO add method to Message to get the song position pointer and document it.
	SPPMsg

	// Tune is a MIDI tune request system common message.
	// There is no further data associated with messages of this type.
	TuneMsg
)

func (Type) Is 

func (t Type) Is(checker Type) bool

Is returns true, if the type correspond to the given type.

func (Type) String 

func (t Type) String() string

String returns the name of the type.

Source Files

View all Source files

Directories

Path Synopsis
internal/drivertest
internal/version
midicat
midicatdrv
Package midicatdrv provides a Driver to connect via the program midicat (from the tools).
 Package midicatdrv provides a Driver to connect via the program midicat (from the tools).
portmididrv
Package portmididrv provides an Driver to connect via portmidi.
 Package portmididrv provides an Driver to connect via portmidi.
portmididrv/imported/portmidi
Package portmidi provides PortMidi bindings.
 Package portmidi provides PortMidi bindings.
rtmididrv
Package rtmididrv provides a Driver to connect via rtmidi.
 Package rtmididrv provides a Driver to connect via rtmidi.
rtmididrv/imported/rtmidi
testdrv
Package testdrv provides a Driver for testing.
 Package testdrv provides a Driver for testing.
webmididrv
Package webmididrv provides a Driver to connect to MIDI ports in the browser (via webmidi).
 Package webmididrv provides a Driver to connect to MIDI ports in the browser (via webmidi).
webmididrv/example Module
example
listports Module
logger Module
simple Module
smf0player Module
smf0recorder Module
smfplayer Module
smfrecorder Module
Package gm provides constants for instruments, drumkits and percussion keys based on the General MIDI standard.
 Package gm provides constants for instruments, drumkits and percussion keys based on the General MIDI standard.
internal
runningstatus
utils
Package mmc helps with reading and writing of MIDI Universal Real Time SysEx Commands.
 Package mmc helps with reading and writing of MIDI Universal Real Time SysEx Commands.
Package smf helps with reading and writing of Standard MIDI Files.
 Package smf helps with reading and writing of Standard MIDI Files.
Package sysex provides helpers when dealing with system exclusiv messages
 Package sysex provides helpers when dealing with system exclusiv messages
tools
midicat/cmd/midicat Module
midispy Module
midispy/cmd/midispy Module
smflyrics Module

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.