nagios

package
v0.0.0-...-65182dd Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Feb 18, 2019 License: BSD-3-Clause Imports: 3 Imported by: 0

Documentation

Index

Constants

This section is empty.

Variables

This section is empty.

Functions

func AcknowledgeHostProblem 

func AcknowledgeHostProblem(
	host_name string,
	sticky bool,
	notify bool,
	persistent bool,
	author string,
	comment string,
) *livestatus.Command

AcknowledgeHostProblem creates a new "ACKNOWLEDGE_HOST_PROBLEM" Nagios command.

Allows you to acknowledge the current problem for the specified host.

By acknowledging the current problem, future notifications (for the same host state) are disabled.

If the "sticky" option is set to two (2), the acknowledgement will remain until the host returns to an UP state.

Otherwise the acknowledgement will automatically be removed when the host changes state.

If the "notify" option is set to one (1), a notification will be sent out to contacts indicating that the current host problem has been acknowledged.

If the "persistent" option is set to one (1), the comment associated with the acknowledgement will survive across restarts of the Nagios process.

If not, the comment will be deleted the next time Nagios restarts.

func AcknowledgeSvcProblem 

func AcknowledgeSvcProblem(
	host_name string,
	service_description string,
	sticky bool,
	notify bool,
	persistent bool,
	author string,
	comment string,
) *livestatus.Command

AcknowledgeSvcProblem creates a new "ACKNOWLEDGE_SVC_PROBLEM" Nagios command.

Allows you to acknowledge the current problem for the specified service.

By acknowledging the current problem, future notifications (for the same servicestate) are disabled.

If the "sticky" option is set to two (2), the acknowledgement will remain until the service returns to an OK state.

Otherwise the acknowledgement will automatically be removed when the service changes state.

If the "notify" option is set to one (1), a notification will be sent out to contacts indicating that the current service problem has been acknowledged.

If the "persistent" option is set to one (1), the comment associated with the acknowledgement will survive across restarts of the Nagios process.

If not, the comment will be deleted the next time Nagios restarts.

func AddHostComment 

func AddHostComment(
	host_name string,
	persistent bool,
	author string,
	comment string,
) *livestatus.Command

AddHostComment creates a new "ADD_HOST_COMMENT" Nagios command.

Adds a comment to a particular host.

If the "persistent" field is set to zero (0), the comment will be deleted the next time Nagios is restarted.

Otherwise, the comment will persist across program restarts until it is deleted manually.

func AddSvcComment 

func AddSvcComment(
	host_name string,
	service_description string,
	persistent bool,
	author string,
	comment string,
) *livestatus.Command

AddSvcComment creates a new "ADD_SVC_COMMENT" Nagios command.

Adds a comment to a particular service.

If the "persistent" field is set to zero (0), the comment will be deleted the next time Nagios is restarted.

Otherwise, the comment will persist across program restarts until it is deleted manually.

func ChangeContactHostNotificationTimeperiod 

func ChangeContactHostNotificationTimeperiod(
	contact_name string,
	notification_timeperiod string,
) *livestatus.Command

ChangeContactHostNotificationTimeperiod creates a new "CHANGE_CONTACT_HOST_NOTIFICATION_TIMEPERIOD" Nagios command.

Changes the host notification timeperiod for a particular contact to what is specified by the "notification_timeperiod" option.

The "notification_timeperiod" option should be the short name of the timeperiod that is to be used as the contact's host notification timeperiod.

The timeperiod must have been configured in Nagios before it was last (re)started.

func ChangeContactModattr 

func ChangeContactModattr(
	contact_name string,
	value string,
) *livestatus.Command

ChangeContactModattr creates a new "CHANGE_CONTACT_MODATTR" Nagios command.

This command changes the modified attributes value for the specified contact.

Modified attributes values are used by Nagios to determine which object properties should be retained across program restarts.

Thus, modifying the value of the attributes can affect data retention.

This is an advanced option and should only be used by people who are intimately familiar with the data retention logic in Nagios.

func ChangeContactModhattr 

func ChangeContactModhattr(
	contact_name string,
	value string,
) *livestatus.Command

ChangeContactModhattr creates a new "CHANGE_CONTACT_MODHATTR" Nagios command.

This command changes the modified host attributes value for the specified contact.

Modified attributes values are used by Nagios to determine which object properties should be retained across program restarts.

Thus, modifying the value of the attributes can affect data retention.

This is an advanced option and should only be used by people who are intimately familiar with the data retention logic in Nagios.

func ChangeContactModsattr 

func ChangeContactModsattr(
	contact_name string,
	value string,
) *livestatus.Command

ChangeContactModsattr creates a new "CHANGE_CONTACT_MODSATTR" Nagios command.

This command changes the modified service attributes value for the specified contact.

Modified attributes values are used by Nagios to determine which object properties should be retained across program restarts.

Thus, modifying the value of the attributes can affect data retention.

This is an advanced option and should only be used by people who are intimately familiar with the data retention logic in Nagios.

func ChangeContactSvcNotificationTimeperiod 

func ChangeContactSvcNotificationTimeperiod(
	contact_name string,
	notification_timeperiod string,
) *livestatus.Command

ChangeContactSvcNotificationTimeperiod creates a new "CHANGE_CONTACT_SVC_NOTIFICATION_TIMEPERIOD" Nagios command.

Changes the service notification timeperiod for a particular contact to what is specified by the "notification_timeperiod" option.

The "notification_timeperiod" option should be the short name of the timeperiod that is to be used as the contact's service notification timeperiod.

The timeperiod must have been configured in Nagios before it was last (re)started.

func ChangeCustomContactVar 

func ChangeCustomContactVar(
	contact_name string,
	varname string,
	varvalue string,
) *livestatus.Command

ChangeCustomContactVar creates a new "CHANGE_CUSTOM_CONTACT_VAR" Nagios command.

Changes the value of a custom contact variable.

func ChangeCustomHostVar 

func ChangeCustomHostVar(
	host_name string,
	varname string,
	varvalue string,
) *livestatus.Command

ChangeCustomHostVar creates a new "CHANGE_CUSTOM_HOST_VAR" Nagios command.

Changes the value of a custom host variable.

func ChangeCustomSvcVar 

func ChangeCustomSvcVar(
	host_name string,
	service_description string,
	varname string,
	varvalue string,
) *livestatus.Command

ChangeCustomSvcVar creates a new "CHANGE_CUSTOM_SVC_VAR" Nagios command.

Changes the value of a custom service variable.

func ChangeGlobalHostEventHandler 

func ChangeGlobalHostEventHandler(
	event_handler_command string,
) *livestatus.Command

ChangeGlobalHostEventHandler creates a new "CHANGE_GLOBAL_HOST_EVENT_HANDLER" Nagios command.

Changes the global host event handler command to be that specified by the "event_handler_command" option.

The "event_handler_command" option specifies the short name of the command that should be used as the new host event handler.

The command must have been configured in Nagios before it was last (re)started.

func ChangeGlobalSvcEventHandler 

func ChangeGlobalSvcEventHandler(
	event_handler_command string,
) *livestatus.Command

ChangeGlobalSvcEventHandler creates a new "CHANGE_GLOBAL_SVC_EVENT_HANDLER" Nagios command.

Changes the global service event handler command to be that specified by the "event_handler_command" option.

The "event_handler_command" option specifies the short name of the command that should be used as the new service event handler.

The command must have been configured in Nagios before it was last (re)started.

func ChangeHostCheckCommand 

func ChangeHostCheckCommand(
	host_name string,
	check_command string,
) *livestatus.Command

ChangeHostCheckCommand creates a new "CHANGE_HOST_CHECK_COMMAND" Nagios command.

Changes the check command for a particular host to be that specified by the "check_command" option.

The "check_command" option specifies the short name of the command that should be used as the new host check command.

The command must have been configured in Nagios before it was last (re)started.

func ChangeHostCheckTimeperiod 

func ChangeHostCheckTimeperiod(
	host_name string,
	timeperiod string,
) *livestatus.Command

ChangeHostCheckTimeperiod creates a new "CHANGE_HOST_CHECK_TIMEPERIOD" Nagios command.

Changes the valid check period for the specified host.

func ChangeHostEventHandler 

func ChangeHostEventHandler(
	host_name string,
	event_handler_command string,
) *livestatus.Command

ChangeHostEventHandler creates a new "CHANGE_HOST_EVENT_HANDLER" Nagios command.

Changes the event handler command for a particular host to be that specified by the "event_handler_command" option.

The "event_handler_command" option specifies the short name of the command that should be used as the new host event handler.

The command must have been configured in Nagios before it was last (re)started.

func ChangeHostModattr 

func ChangeHostModattr(
	host_name string,
	value string,
) *livestatus.Command

ChangeHostModattr creates a new "CHANGE_HOST_MODATTR" Nagios command.

This command changes the modified attributes value for the specified host.

Modified attributes values are used by Nagios to determine which object properties should be retained across program restarts.

Thus, modifying the value of the attributes can affect data retention.

This is an advanced option and should only be used by people who are intimately familiar with the data retention logic in Nagios.

func ChangeMaxHostCheckAttempts 

func ChangeMaxHostCheckAttempts(
	host_name string,
	check_attempts int,
) *livestatus.Command

ChangeMaxHostCheckAttempts creates a new "CHANGE_MAX_HOST_CHECK_ATTEMPTS" Nagios command.

Changes the maximum number of check attempts (retries) for a particular host.

func ChangeMaxSvcCheckAttempts 

func ChangeMaxSvcCheckAttempts(
	host_name string,
	service_description string,
	check_attempts int,
) *livestatus.Command

ChangeMaxSvcCheckAttempts creates a new "CHANGE_MAX_SVC_CHECK_ATTEMPTS" Nagios command.

Changes the maximum number of check attempts (retries) for a particular service.

func ChangeNormalHostCheckInterval 

func ChangeNormalHostCheckInterval(
	host_name string,
	check_interval time.Duration,
) *livestatus.Command

ChangeNormalHostCheckInterval creates a new "CHANGE_NORMAL_HOST_CHECK_INTERVAL" Nagios command.

Changes the normal (regularly scheduled) check interval for a particular host.

func ChangeNormalSvcCheckInterval 

func ChangeNormalSvcCheckInterval(
	host_name string,
	service_description string,
	check_interval time.Duration,
) *livestatus.Command

ChangeNormalSvcCheckInterval creates a new "CHANGE_NORMAL_SVC_CHECK_INTERVAL" Nagios command.

Changes the normal (regularly scheduled) check interval for a particular service

func ChangeRetryHostCheckInterval 

func ChangeRetryHostCheckInterval(
	host_name string,
	service_description string,
	check_interval time.Duration,
) *livestatus.Command

ChangeRetryHostCheckInterval creates a new "CHANGE_RETRY_HOST_CHECK_INTERVAL" Nagios command.

Changes the retry check interval for a particular host.

func ChangeRetrySvcCheckInterval 

func ChangeRetrySvcCheckInterval(
	host_name string,
	service_description string,
	check_interval time.Duration,
) *livestatus.Command

ChangeRetrySvcCheckInterval creates a new "CHANGE_RETRY_SVC_CHECK_INTERVAL" Nagios command.

Changes the retry check interval for a particular service.

func ChangeSvcCheckCommand 

func ChangeSvcCheckCommand(
	host_name string,
	service_description string,
	check_command string,
) *livestatus.Command

ChangeSvcCheckCommand creates a new "CHANGE_SVC_CHECK_COMMAND" Nagios command.

Changes the check command for a particular service to be that specified by the "check_command" option.

The "check_command" option specifies the short name of the command that should be used as the new service check command.

The command must have been configured in Nagios before it was last (re)started.

func ChangeSvcCheckTimeperiod 

func ChangeSvcCheckTimeperiod(
	host_name string,
	service_description string,
	check_timeperiod string,
) *livestatus.Command

ChangeSvcCheckTimeperiod creates a new "CHANGE_SVC_CHECK_TIMEPERIOD" Nagios command.

Changes the check timeperiod for a particular service to what is specified by the "check_timeperiod" option.

The "check_timeperiod" option should be the short name of the timeperod that is to be used as the service check timeperiod.

The timeperiod must have been configured in Nagios before it was last (re)started.

func ChangeSvcEventHandler 

func ChangeSvcEventHandler(
	host_name string,
	service_description string,
	event_handler_command string,
) *livestatus.Command

ChangeSvcEventHandler creates a new "CHANGE_SVC_EVENT_HANDLER" Nagios command.

Changes the event handler command for a particular service to be that specified by the "event_handler_command" option.

The "event_handler_command" option specifies the short name of the command that should be used as the new service event handler.

The command must have been configured in Nagios before it was last (re)started.

func ChangeSvcModattr 

func ChangeSvcModattr(
	host_name string,
	service_description string,
	value string,
) *livestatus.Command

ChangeSvcModattr creates a new "CHANGE_SVC_MODATTR" Nagios command.

This command changes the modified attributes value for the specified service.

Modified attributes values are used by Nagios to determine which object properties should be retained across program restarts.

Thus, modifying the value of the attributes can affect data retention.

This is an advanced option and should only be used by people who are intimately familiar with the data retention logic in Nagios.

func ChangeSvcNotificationTimeperiod 

func ChangeSvcNotificationTimeperiod(
	host_name string,
	service_description string,
	notification_timeperiod string,
) *livestatus.Command

ChangeSvcNotificationTimeperiod creates a new "CHANGE_SVC_NOTIFICATION_TIMEPERIOD" Nagios command.

Changes the notification timeperiod for a particular service to what is specified by the "notification_timeperiod" option.

The "notification_timeperiod" option should be the short name of the timeperiod that is to be used as the service notification timeperiod.

The timeperiod must have been configured in Nagios before it was last (re)started.

func DelAllHostComments 

func DelAllHostComments(
	host_name string,
) *livestatus.Command

DelAllHostComments creates a new "DEL_ALL_HOST_COMMENTS" Nagios command.

Deletes all comments assocated with a particular host.

func DelAllSvcComments 

func DelAllSvcComments(
	host_name string,
	service_description string,
) *livestatus.Command

DelAllSvcComments creates a new "DEL_ALL_SVC_COMMENTS" Nagios command.

Deletes all comments associated with a particular service.

func DelHostComment 

func DelHostComment(
	comment_id int,
) *livestatus.Command

DelHostComment creates a new "DEL_HOST_COMMENT" Nagios command.

Deletes a host comment.

The id number of the comment that is to be deleted must be specified.

func DelHostDowntime 

func DelHostDowntime(
	downtime_id int,
) *livestatus.Command

DelHostDowntime creates a new "DEL_HOST_DOWNTIME" Nagios command.

Deletes the host downtime entry that has an ID number matching the "downtime_id" argument.

If the downtime is currently in effect, the host will come out of scheduled downtime (as long as there are no other overlapping active downtime entries).

func DelSvcComment 

func DelSvcComment(
	comment_id int,
) *livestatus.Command

DelSvcComment creates a new "DEL_SVC_COMMENT" Nagios command.

Deletes a service comment.

The id number of the comment that is to be deleted must be specified.

func DelSvcDowntime 

func DelSvcDowntime(
	downtime_id int,
) *livestatus.Command

DelSvcDowntime creates a new "DEL_SVC_DOWNTIME" Nagios command.

Deletes the service downtime entry that has an ID number matching the "downtime_id" argument.

If the downtime is currently in effect, the service will come out of scheduled downtime (as long as there are no other overlapping active downtime entries).

func DelayHostNotification 

func DelayHostNotification(
	host_name string,
	notification_time time.Time,
) *livestatus.Command

DelayHostNotification creates a new "DELAY_HOST_NOTIFICATION" Nagios command.

Delays the next notification for a parciular service until "notification_time".

The "notification_time" argument is specified in time_t format (seconds since the UNIX epoch).

Note that this will only have an affect if the service stays in the same problem state that it is currently in.

If the service changes to another state, a new notification may go out before the time you specify in the "notification_time" argument.

func DelaySvcNotification 

func DelaySvcNotification(
	host_name string,
	service_description string,
	notification_time time.Time,
) *livestatus.Command

DelaySvcNotification creates a new "DELAY_SVC_NOTIFICATION" Nagios command.

Delays the next notification for a parciular service until "notification_time".

The "notification_time" argument is specified in time_t format (seconds since the UNIX epoch).

Note that this will only have an affect if the service stays in the same problem state that it is currently in.

If the service changes to another state, a new notification may go out before the time you specify in the "notification_time" argument.

func DisableAllNotificationsBeyondHost 

func DisableAllNotificationsBeyondHost(
	host_name string,
) *livestatus.Command

DisableAllNotificationsBeyondHost creates a new "DISABLE_ALL_NOTIFICATIONS_BEYOND_HOST" Nagios command.

Disables notifications for all hosts and services "beyond" (e.g. on all child hosts of) the specified host.

The current notification setting for the specified host is not affected.

func DisableContactHostNotifications 

func DisableContactHostNotifications(
	contact_name string,
) *livestatus.Command

DisableContactHostNotifications creates a new "DISABLE_CONTACT_HOST_NOTIFICATIONS" Nagios command.

Disables host notifications for a particular contact.

func DisableContactSvcNotifications 

func DisableContactSvcNotifications(
	contact_name string,
) *livestatus.Command

DisableContactSvcNotifications creates a new "DISABLE_CONTACT_SVC_NOTIFICATIONS" Nagios command.

Disables service notifications for a particular contact.

func DisableContactgroupHostNotifications 

func DisableContactgroupHostNotifications(
	contactgroup_name string,
) *livestatus.Command

DisableContactgroupHostNotifications creates a new "DISABLE_CONTACTGROUP_HOST_NOTIFICATIONS" Nagios command.

Disables host notifications for all contacts in a particular contactgroup.

func DisableContactgroupSvcNotifications 

func DisableContactgroupSvcNotifications(
	contactgroup_name string,
) *livestatus.Command

DisableContactgroupSvcNotifications creates a new "DISABLE_CONTACTGROUP_SVC_NOTIFICATIONS" Nagios command.

Disables service notifications for all contacts in a particular contactgroup.

func DisableEventHandlers 

func DisableEventHandlers() *livestatus.Command

DisableEventHandlers creates a new "DISABLE_EVENT_HANDLERS" Nagios command.

Disables host and service event handlers on a program-wide basis.

func DisableFailurePrediction 

func DisableFailurePrediction() *livestatus.Command

DisableFailurePrediction creates a new "DISABLE_FAILURE_PREDICTION" Nagios command.

Disables failure prediction on a program-wide basis.

This feature is not currently implemented in Nagios.

func DisableFlapDetection 

func DisableFlapDetection() *livestatus.Command

DisableFlapDetection creates a new "DISABLE_FLAP_DETECTION" Nagios command.

Disables host and service flap detection on a program-wide basis.

func DisableHostAndChildNotifications 

func DisableHostAndChildNotifications(
	host_name string,
) *livestatus.Command

DisableHostAndChildNotifications creates a new "DISABLE_HOST_AND_CHILD_NOTIFICATIONS" Nagios command.

Disables notifications for the specified host, as well as all hosts "beyond" (e.g. on all child hosts of) the specified host.

func DisableHostCheck 

func DisableHostCheck(
	host_name string,
) *livestatus.Command

DisableHostCheck creates a new "DISABLE_HOST_CHECK" Nagios command.

Disables (regularly scheduled and on-demand) active checks of the specified host.

func DisableHostEventHandler 

func DisableHostEventHandler(
	host_name string,
) *livestatus.Command

DisableHostEventHandler creates a new "DISABLE_HOST_EVENT_HANDLER" Nagios command.

Disables the event handler for the specified host.

func DisableHostFlapDetection 

func DisableHostFlapDetection(
	host_name string,
) *livestatus.Command

DisableHostFlapDetection creates a new "DISABLE_HOST_FLAP_DETECTION" Nagios command.

Disables flap detection for the specified host.

func DisableHostFreshnessChecks 

func DisableHostFreshnessChecks() *livestatus.Command

DisableHostFreshnessChecks creates a new "DISABLE_HOST_FRESHNESS_CHECKS" Nagios command.

Disables freshness checks of all hosts on a program-wide basis.

func DisableHostNotifications 

func DisableHostNotifications(
	host_name string,
) *livestatus.Command

DisableHostNotifications creates a new "DISABLE_HOST_NOTIFICATIONS" Nagios command.

Disables notifications for a particular host.

func DisableHostSvcChecks 

func DisableHostSvcChecks(
	host_name string,
) *livestatus.Command

DisableHostSvcChecks creates a new "DISABLE_HOST_SVC_CHECKS" Nagios command.

Enables active checks of all services on the specified host.

func DisableHostSvcNotifications 

func DisableHostSvcNotifications(
	host_name string,
) *livestatus.Command

DisableHostSvcNotifications creates a new "DISABLE_HOST_SVC_NOTIFICATIONS" Nagios command.

Disables notifications for all services on the specified host.

func DisableHostgroupHostChecks 

func DisableHostgroupHostChecks(
	hostgroup_name string,
) *livestatus.Command

DisableHostgroupHostChecks creates a new "DISABLE_HOSTGROUP_HOST_CHECKS" Nagios command.

Disables active checks for all hosts in a particular hostgroup.

func DisableHostgroupHostNotifications 

func DisableHostgroupHostNotifications(
	hostgroup_name string,
) *livestatus.Command

DisableHostgroupHostNotifications creates a new "DISABLE_HOSTGROUP_HOST_NOTIFICATIONS" Nagios command.

Disables notifications for all hosts in a particular hostgroup.

This does not disable notifications for the services associated with the hosts in the hostgroup - see the DISABLE_HOSTGROUP_SVC_NOTIFICATIONS command for that.

func DisableHostgroupPassiveHostChecks 

func DisableHostgroupPassiveHostChecks(
	hostgroup_name string,
) *livestatus.Command

DisableHostgroupPassiveHostChecks creates a new "DISABLE_HOSTGROUP_PASSIVE_HOST_CHECKS" Nagios command.

Disables passive checks for all hosts in a particular hostgroup.

func DisableHostgroupPassiveSvcChecks 

func DisableHostgroupPassiveSvcChecks(
	hostgroup_name string,
) *livestatus.Command

DisableHostgroupPassiveSvcChecks creates a new "DISABLE_HOSTGROUP_PASSIVE_SVC_CHECKS" Nagios command.

Disables passive checks for all services associated with hosts in a particular hostgroup.

func DisableHostgroupSvcChecks 

func DisableHostgroupSvcChecks(
	hostgroup_name string,
) *livestatus.Command

DisableHostgroupSvcChecks creates a new "DISABLE_HOSTGROUP_SVC_CHECKS" Nagios command.

Disables active checks for all services associated with hosts in a particular hostgroup.

func DisableHostgroupSvcNotifications 

func DisableHostgroupSvcNotifications(
	hostgroup_name string,
) *livestatus.Command

DisableHostgroupSvcNotifications creates a new "DISABLE_HOSTGROUP_SVC_NOTIFICATIONS" Nagios command.

Disables notifications for all services associated with hosts in a particular hostgroup.

This does not disable notifications for the hosts in the hostgroup - see the DISABLE_HOSTGROUP_HOST_NOTIFICATIONS command for that.

func DisableNotifications 

func DisableNotifications() *livestatus.Command

DisableNotifications creates a new "DISABLE_NOTIFICATIONS" Nagios command.

Disables host and service notifications on a program-wide basis.

func DisablePassiveHostChecks 

func DisablePassiveHostChecks(
	host_name string,
) *livestatus.Command

DisablePassiveHostChecks creates a new "DISABLE_PASSIVE_HOST_CHECKS" Nagios command.

Disables acceptance and processing of passive host checks for the specified host.

func DisablePassiveSvcChecks 

func DisablePassiveSvcChecks(
	host_name string,
	service_description string,
) *livestatus.Command

DisablePassiveSvcChecks creates a new "DISABLE_PASSIVE_SVC_CHECKS" Nagios command.

Disables passive checks for the specified service.

func DisablePerformanceData 

func DisablePerformanceData() *livestatus.Command

DisablePerformanceData creates a new "DISABLE_PERFORMANCE_DATA" Nagios command.

Disables the processing of host and service performance data on a program-wide basis.

func DisableServiceFlapDetection 

func DisableServiceFlapDetection(
	host_name string,
	service_description string,
) *livestatus.Command

DisableServiceFlapDetection creates a new "DISABLE_SERVICE_FLAP_DETECTION" Nagios command.

Disables flap detection for the specified service.

func DisableServiceFreshnessChecks 

func DisableServiceFreshnessChecks() *livestatus.Command

DisableServiceFreshnessChecks creates a new "DISABLE_SERVICE_FRESHNESS_CHECKS" Nagios command.

Disables freshness checks of all services on a program-wide basis.

func DisableServicegroupHostChecks 

func DisableServicegroupHostChecks(
	servicegroup_name string,
) *livestatus.Command

DisableServicegroupHostChecks creates a new "DISABLE_SERVICEGROUP_HOST_CHECKS" Nagios command.

Disables active checks for all hosts that have services that are members of a particular hostgroup.

func DisableServicegroupHostNotifications 

func DisableServicegroupHostNotifications(
	servicegroup_name string,
) *livestatus.Command

DisableServicegroupHostNotifications creates a new "DISABLE_SERVICEGROUP_HOST_NOTIFICATIONS" Nagios command.

Disables notifications for all hosts that have services that are members of a particular servicegroup.

func DisableServicegroupPassiveHostChecks 

func DisableServicegroupPassiveHostChecks(
	servicegroup_name string,
) *livestatus.Command

DisableServicegroupPassiveHostChecks creates a new "DISABLE_SERVICEGROUP_PASSIVE_HOST_CHECKS" Nagios command.

Disables the acceptance and processing of passive checks for all hosts that have services that are members of a particular service group.

func DisableServicegroupPassiveSvcChecks 

func DisableServicegroupPassiveSvcChecks(
	servicegroup_name string,
) *livestatus.Command

DisableServicegroupPassiveSvcChecks creates a new "DISABLE_SERVICEGROUP_PASSIVE_SVC_CHECKS" Nagios command.

Disables the acceptance and processing of passive checks for all services in a particular servicegroup.

func DisableServicegroupSvcChecks 

func DisableServicegroupSvcChecks(
	servicegroup_name string,
) *livestatus.Command

DisableServicegroupSvcChecks creates a new "DISABLE_SERVICEGROUP_SVC_CHECKS" Nagios command.

Disables active checks for all services in a particular servicegroup.

func DisableServicegroupSvcNotifications 

func DisableServicegroupSvcNotifications(
	servicegroup_name string,
) *livestatus.Command

DisableServicegroupSvcNotifications creates a new "DISABLE_SERVICEGROUP_SVC_NOTIFICATIONS" Nagios command.

Disables notifications for all services that are members of a particular servicegroup.

func DisableSvcCheck 

func DisableSvcCheck(
	host_name string,
	service_description string,
) *livestatus.Command

DisableSvcCheck creates a new "DISABLE_SVC_CHECK" Nagios command.

Disables active checks for a particular service.

func DisableSvcEventHandler 

func DisableSvcEventHandler(
	host_name string,
	service_description string,
) *livestatus.Command

DisableSvcEventHandler creates a new "DISABLE_SVC_EVENT_HANDLER" Nagios command.

Disables the event handler for the specified service.

func DisableSvcFlapDetection 

func DisableSvcFlapDetection(
	host_name string,
	service_description string,
) *livestatus.Command

DisableSvcFlapDetection creates a new "DISABLE_SVC_FLAP_DETECTION" Nagios command.

Disables flap detection for the specified service.

func DisableSvcNotifications 

func DisableSvcNotifications(
	host_name string,
	service_description string,
) *livestatus.Command

DisableSvcNotifications creates a new "DISABLE_SVC_NOTIFICATIONS" Nagios command.

Disables notifications for a particular service.

func EnableAllNotificationsBeyondHost 

func EnableAllNotificationsBeyondHost(
	host_name string,
) *livestatus.Command

EnableAllNotificationsBeyondHost creates a new "ENABLE_ALL_NOTIFICATIONS_BEYOND_HOST" Nagios command.

Enables notifications for all hosts and services "beyond" (e.g. on all child hosts of) the specified host.

The current notification setting for the specified host is not affected.

Notifications will only be sent out for these hosts and services if notifications are also enabled on a program-wide basis.

func EnableContactHostNotifications 

func EnableContactHostNotifications(
	contact_name string,
) *livestatus.Command

EnableContactHostNotifications creates a new "ENABLE_CONTACT_HOST_NOTIFICATIONS" Nagios command.

Enables host notifications for a particular contact.

func EnableContactSvcNotifications 

func EnableContactSvcNotifications(
	contact_name string,
) *livestatus.Command

EnableContactSvcNotifications creates a new "ENABLE_CONTACT_SVC_NOTIFICATIONS" Nagios command.

Disables service notifications for a particular contact.

func EnableContactgroupHostNotifications 

func EnableContactgroupHostNotifications(
	contactgroup_name string,
) *livestatus.Command

EnableContactgroupHostNotifications creates a new "ENABLE_CONTACTGROUP_HOST_NOTIFICATIONS" Nagios command.

Enables host notifications for all contacts in a particular contactgroup.

func EnableContactgroupSvcNotifications 

func EnableContactgroupSvcNotifications(
	contactgroup_name string,
) *livestatus.Command

EnableContactgroupSvcNotifications creates a new "ENABLE_CONTACTGROUP_SVC_NOTIFICATIONS" Nagios command.

Enables service notifications for all contacts in a particular contactgroup.

func EnableEventHandlers 

func EnableEventHandlers() *livestatus.Command

EnableEventHandlers creates a new "ENABLE_EVENT_HANDLERS" Nagios command.

Enables host and service event handlers on a program-wide basis.

func EnableFailurePrediction 

func EnableFailurePrediction() *livestatus.Command

EnableFailurePrediction creates a new "ENABLE_FAILURE_PREDICTION" Nagios command.

Enables failure prediction on a program-wide basis.

This feature is not currently implemented in Nagios.

func EnableFlapDetection 

func EnableFlapDetection() *livestatus.Command

EnableFlapDetection creates a new "ENABLE_FLAP_DETECTION" Nagios command.

Enables host and service flap detection on a program-wide basis.

func EnableHostAndChildNotifications 

func EnableHostAndChildNotifications(
	host_name string,
) *livestatus.Command

EnableHostAndChildNotifications creates a new "ENABLE_HOST_AND_CHILD_NOTIFICATIONS" Nagios command.

Enables notifications for the specified host, as well as all hosts "beyond" (e.g. on all child hosts of) the specified host.

Notifications will only be sent out for these hosts if notifications are also enabled on a program-wide basis.

func EnableHostCheck 

func EnableHostCheck(
	host_name string,
) *livestatus.Command

EnableHostCheck creates a new "ENABLE_HOST_CHECK" Nagios command.

Enables (regularly scheduled and on-demand) active checks of the specified host.

func EnableHostEventHandler 

func EnableHostEventHandler(
	host_name string,
) *livestatus.Command

EnableHostEventHandler creates a new "ENABLE_HOST_EVENT_HANDLER" Nagios command.

Enables the event handler for the specified host.

func EnableHostFlapDetection 

func EnableHostFlapDetection(
	host_name string,
) *livestatus.Command

EnableHostFlapDetection creates a new "ENABLE_HOST_FLAP_DETECTION" Nagios command.

Enables flap detection for the specified host.

In order for the flap detection algorithms to be run for the host, flap detection must be enabled on a program-wide basis as well.

func EnableHostFreshnessChecks 

func EnableHostFreshnessChecks() *livestatus.Command

EnableHostFreshnessChecks creates a new "ENABLE_HOST_FRESHNESS_CHECKS" Nagios command.

Enables freshness checks of all hosts on a program-wide basis.

Individual hosts that have freshness checks disabled will not be checked for freshness.

func EnableHostNotifications 

func EnableHostNotifications(
	host_name string,
) *livestatus.Command

EnableHostNotifications creates a new "ENABLE_HOST_NOTIFICATIONS" Nagios command.

Enables notifications for a particular host.

Notifications will be sent out for the host only if notifications are enabled on a program-wide basis as well.

func EnableHostSvcChecks 

func EnableHostSvcChecks(
	host_name string,
) *livestatus.Command

EnableHostSvcChecks creates a new "ENABLE_HOST_SVC_CHECKS" Nagios command.

Enables active checks of all services on the specified host.

func EnableHostSvcNotifications 

func EnableHostSvcNotifications(
	host_name string,
) *livestatus.Command

EnableHostSvcNotifications creates a new "ENABLE_HOST_SVC_NOTIFICATIONS" Nagios command.

Enables notifications for all services on the specified host.

Note that notifications will not be sent out if notifications are disabled on a program-wide basis.

func EnableHostgroupHostChecks 

func EnableHostgroupHostChecks(
	hostgroup_name string,
) *livestatus.Command

EnableHostgroupHostChecks creates a new "ENABLE_HOSTGROUP_HOST_CHECKS" Nagios command.

Enables active checks for all hosts in a particular hostgroup.

func EnableHostgroupHostNotifications 

func EnableHostgroupHostNotifications(
	hostgroup_name string,
) *livestatus.Command

EnableHostgroupHostNotifications creates a new "ENABLE_HOSTGROUP_HOST_NOTIFICATIONS" Nagios command.

Enables notifications for all hosts in a particular hostgroup.

This does not enable notifications for the services associated with the hosts in the hostgroup - see the ENABLE_HOSTGROUP_SVC_NOTIFICATIONS command for that.

In order for notifications to be sent out for these hosts, notifications must be enabled on a program-wide basis as well.

func EnableHostgroupPassiveHostChecks 

func EnableHostgroupPassiveHostChecks(
	hostgroup_name string,
) *livestatus.Command

EnableHostgroupPassiveHostChecks creates a new "ENABLE_HOSTGROUP_PASSIVE_HOST_CHECKS" Nagios command.

Enables passive checks for all hosts in a particular hostgroup.

func EnableHostgroupPassiveSvcChecks 

func EnableHostgroupPassiveSvcChecks(
	hostgroup_name string,
) *livestatus.Command

EnableHostgroupPassiveSvcChecks creates a new "ENABLE_HOSTGROUP_PASSIVE_SVC_CHECKS" Nagios command.

Enables passive checks for all services associated with hosts in a particular hostgroup.

func EnableHostgroupSvcChecks 

func EnableHostgroupSvcChecks(
	hostgroup_name string,
) *livestatus.Command

EnableHostgroupSvcChecks creates a new "ENABLE_HOSTGROUP_SVC_CHECKS" Nagios command.

Enables active checks for all services associated with hosts in a particular hostgroup.

func EnableHostgroupSvcNotifications 

func EnableHostgroupSvcNotifications(
	hostgroup_name string,
) *livestatus.Command

EnableHostgroupSvcNotifications creates a new "ENABLE_HOSTGROUP_SVC_NOTIFICATIONS" Nagios command.

Enables notifications for all services that are associated with hosts in a particular hostgroup.

This does not enable notifications for the hosts in the hostgroup - see the ENABLE_HOSTGROUP_HOST_NOTIFICATIONS command for that.

In order for notifications to be sent out for these services, notifications must be enabled on a program-wide basis as well.

func EnableNotifications 

func EnableNotifications() *livestatus.Command

EnableNotifications creates a new "ENABLE_NOTIFICATIONS" Nagios command.

Enables host and service notifications on a program-wide basis.

func EnablePassiveHostChecks 

func EnablePassiveHostChecks(
	host_name string,
) *livestatus.Command

EnablePassiveHostChecks creates a new "ENABLE_PASSIVE_HOST_CHECKS" Nagios command.

Enables acceptance and processing of passive host checks for the specified host.

func EnablePassiveSvcChecks 

func EnablePassiveSvcChecks(
	host_name string,
	service_description string,
) *livestatus.Command

EnablePassiveSvcChecks creates a new "ENABLE_PASSIVE_SVC_CHECKS" Nagios command.

Enables passive checks for the specified service.

func EnablePerformanceData 

func EnablePerformanceData() *livestatus.Command

EnablePerformanceData creates a new "ENABLE_PERFORMANCE_DATA" Nagios command.

Enables the processing of host and service performance data on a program-wide basis.

func EnableServiceFreshnessChecks 

func EnableServiceFreshnessChecks() *livestatus.Command

EnableServiceFreshnessChecks creates a new "ENABLE_SERVICE_FRESHNESS_CHECKS" Nagios command.

Enables freshness checks of all services on a program-wide basis.

Individual services that have freshness checks disabled will not be checked for freshness.

func EnableServicegroupHostChecks 

func EnableServicegroupHostChecks(
	servicegroup_name string,
) *livestatus.Command

EnableServicegroupHostChecks creates a new "ENABLE_SERVICEGROUP_HOST_CHECKS" Nagios command.

Enables active checks for all hosts that have services that are members of a particular hostgroup.

func EnableServicegroupHostNotifications 

func EnableServicegroupHostNotifications(
	servicegroup_name string,
) *livestatus.Command

EnableServicegroupHostNotifications creates a new "ENABLE_SERVICEGROUP_HOST_NOTIFICATIONS" Nagios command.

Enables notifications for all hosts that have services that are members of a particular servicegroup.

In order for notifications to be sent out for these hosts, notifications must also be enabled on a program-wide basis.

func EnableServicegroupPassiveHostChecks 

func EnableServicegroupPassiveHostChecks(
	servicegroup_name string,
) *livestatus.Command

EnableServicegroupPassiveHostChecks creates a new "ENABLE_SERVICEGROUP_PASSIVE_HOST_CHECKS" Nagios command.

Enables the acceptance and processing of passive checks for all hosts that have services that are members of a particular service group.

func EnableServicegroupPassiveSvcChecks 

func EnableServicegroupPassiveSvcChecks(
	servicegroup_name string,
) *livestatus.Command

EnableServicegroupPassiveSvcChecks creates a new "ENABLE_SERVICEGROUP_PASSIVE_SVC_CHECKS" Nagios command.

Enables the acceptance and processing of passive checks for all services in a particular servicegroup.

func EnableServicegroupSvcChecks 

func EnableServicegroupSvcChecks(
	servicegroup_name string,
) *livestatus.Command

EnableServicegroupSvcChecks creates a new "ENABLE_SERVICEGROUP_SVC_CHECKS" Nagios command.

Enables active checks for all services in a particular servicegroup.

func EnableServicegroupSvcNotifications 

func EnableServicegroupSvcNotifications(
	servicegroup_name string,
) *livestatus.Command

EnableServicegroupSvcNotifications creates a new "ENABLE_SERVICEGROUP_SVC_NOTIFICATIONS" Nagios command.

Enables notifications for all services that are members of a particular servicegroup.

In order for notifications to be sent out for these services, notifications must also be enabled on a program-wide basis.

func EnableSvcCheck 

func EnableSvcCheck(
	host_name string,
	service_description string,
) *livestatus.Command

EnableSvcCheck creates a new "ENABLE_SVC_CHECK" Nagios command.

Enables active checks for a particular service.

func EnableSvcEventHandler 

func EnableSvcEventHandler(
	host_name string,
	service_description string,
) *livestatus.Command

EnableSvcEventHandler creates a new "ENABLE_SVC_EVENT_HANDLER" Nagios command.

Enables the event handler for the specified service.

func EnableSvcFlapDetection 

func EnableSvcFlapDetection(
	host_name string,
	service_description string,
) *livestatus.Command

EnableSvcFlapDetection creates a new "ENABLE_SVC_FLAP_DETECTION" Nagios command.

Enables flap detection for the specified service.

In order for the flap detection algorithms to be run for the service, flap detection must be enabled on a program-wide basis as well.

func EnableSvcNotifications 

func EnableSvcNotifications(
	host_name string,
	service_description string,
) *livestatus.Command

EnableSvcNotifications creates a new "ENABLE_SVC_NOTIFICATIONS" Nagios command.

Enables notifications for a particular service.

Notifications will be sent out for the service only if notifications are enabled on a program-wide basis as well.

func ProcessFile 

func ProcessFile(
	file_name string,
	delete bool,
) *livestatus.Command

ProcessFile creates a new "PROCESS_FILE" Nagios command.

Directs Nagios to process all external commands that are found in the file specified by the <file_name> argument.

If the <delete> option is non-zero, the file will be deleted once it has been processes.

If the <delete> option is set to zero, the file is left untouched.

func ProcessHostCheckResult 

func ProcessHostCheckResult(
	host_name string,
	status_code int,
	plugin_output string,
) *livestatus.Command

ProcessHostCheckResult creates a new "PROCESS_HOST_CHECK_RESULT" Nagios command.

This is used to submit a passive check result for a particular host.

The "status_code" indicates the state of the host check and should be one of the following: 0=UP, 1=DOWN, 2=UNREACHABLE.

The "plugin_output" argument contains the text returned from the host check, along with optional performance data.

func ProcessServiceCheckResult 

func ProcessServiceCheckResult(
	host_name string,
	service_description string,
	return_code int,
	plugin_output string,
) *livestatus.Command

ProcessServiceCheckResult creates a new "PROCESS_SERVICE_CHECK_RESULT" Nagios command.

This is used to submit a passive check result for a particular service.

The "return_code" field should be one of the following: 0=OK, 1=WARNING, 2=CRITICAL, 3=UNKNOWN.

The "plugin_output" field contains text output from the service check, along with optional performance data.

func ReadStateInformation 

func ReadStateInformation() *livestatus.Command

ReadStateInformation creates a new "READ_STATE_INFORMATION" Nagios command.

Causes Nagios to load all current monitoring status information from the state retention file.

Normally, state retention information is loaded when the Nagios process starts up and before it starts monitoring.

WARNING: This command will cause Nagios to discard all current monitoring status information and use the information stored in state retention file!

Use with care.

func RemoveHostAcknowledgement 

func RemoveHostAcknowledgement(
	host_name string,
) *livestatus.Command

RemoveHostAcknowledgement creates a new "REMOVE_HOST_ACKNOWLEDGEMENT" Nagios command.

This removes the problem acknowledgement for a particular host.

Once the acknowledgement has been removed, notifications can once again be sent out for the given host.

func RemoveSvcAcknowledgement 

func RemoveSvcAcknowledgement(
	host_name string,
	service_description string,
) *livestatus.Command

RemoveSvcAcknowledgement creates a new "REMOVE_SVC_ACKNOWLEDGEMENT" Nagios command.

This removes the problem acknowledgement for a particular service.

Once the acknowledgement has been removed, notifications can once again be sent out for the given service.

func RestartProgram 

func RestartProgram() *livestatus.Command

RestartProgram creates a new "RESTART_PROGRAM" Nagios command.

Restarts the Nagios process.

func SaveStateInformation 

func SaveStateInformation() *livestatus.Command

SaveStateInformation creates a new "SAVE_STATE_INFORMATION" Nagios command.

Causes Nagios to save all current monitoring status information to the state retention file.

Normally, state retention information is saved before the Nagios process shuts down and (potentially) at regularly scheduled intervals.

This command allows you to force Nagios to save this information to the state retention file immediately.

This does not affect the current status information in the Nagios process.

func ScheduleAndPropagateHostDowntime 

func ScheduleAndPropagateHostDowntime(
	host_name string,
	start_time time.Time,
	end_time time.Time,
	fixed bool,
	trigger_id int,
	duration time.Duration,
	author string,
	comment string,
) *livestatus.Command

ScheduleAndPropagateHostDowntime creates a new "SCHEDULE_AND_PROPAGATE_HOST_DOWNTIME" Nagios command.

Schedules downtime for a specified host and all of its children (hosts).

If the "fixed" argument is set to one (1), downtime will start and end at the times specified by the "start" and "end" arguments.

Otherwise, downtime will begin between the "start" and "end" times and last for "duration" seconds.

The "start" and "end" arguments are specified in time_t format (seconds since the UNIX epoch).

The specified (parent) host downtime can be triggered by another downtime entry if the "trigger_id" is set to the ID of another scheduled downtime entry.

Set the "trigger_id" argument to zero (0) if the downtime for the specified (parent) host should not be triggered by another downtime entry.

func ScheduleAndPropagateTriggeredHostDowntime 

func ScheduleAndPropagateTriggeredHostDowntime(
	host_name string,
	start_time time.Time,
	end_time time.Time,
	fixed bool,
	trigger_id int,
	duration time.Duration,
	author string,
	comment string,
) *livestatus.Command

ScheduleAndPropagateTriggeredHostDowntime creates a new "SCHEDULE_AND_PROPAGATE_TRIGGERED_HOST_DOWNTIME" Nagios command.

Schedules downtime for a specified host and all of its children (hosts).

If the "fixed" argument is set to one (1), downtime will start and end at the times specified by the "start" and "end" arguments.

Otherwise, downtime will begin between the "start" and "end" times and last for "duration" seconds.

The "start" and "end" arguments are specified in time_t format (seconds since the UNIX epoch).

Downtime for child hosts are all set to be triggered by the downtime for the specified (parent) host.

The specified (parent) host downtime can be triggered by another downtime entry if the "trigger_id" is set to the ID of another scheduled downtime entry.

Set the "trigger_id" argument to zero (0) if the downtime for the specified (parent) host should not be triggered by another downtime entry.

func ScheduleForcedHostCheck 

func ScheduleForcedHostCheck(
	host_name string,
	check_time time.Time,
) *livestatus.Command

ScheduleForcedHostCheck creates a new "SCHEDULE_FORCED_HOST_CHECK" Nagios command.

Schedules a forced active check of a particular host at "check_time".

The "check_time" argument is specified in time_t format (seconds since the UNIX epoch). 

Forced checks are performed regardless of what time it is (e.g. timeperiod restrictions are ignored) and whether or

not active checks are enabled on a host-specific or program-wide basis.

func ScheduleForcedHostSvcChecks 

func ScheduleForcedHostSvcChecks(
	host_name string,
	check_time time.Time,
) *livestatus.Command

ScheduleForcedHostSvcChecks creates a new "SCHEDULE_FORCED_HOST_SVC_CHECKS" Nagios command.

Schedules a forced active check of all services associated with a particular host at "check_time".

The "check_time" argument is specified in time_t format (seconds since the UNIX epoch). 

Forced checks are performed regardless of what time it is (e.g. timeperiod restrictions are ignored) and whether or

not active checks are enabled on a service-specific or program-wide basis.

func ScheduleForcedSvcCheck 

func ScheduleForcedSvcCheck(
	host_name string,
	service_description string,
	check_time time.Time,
) *livestatus.Command

ScheduleForcedSvcCheck creates a new "SCHEDULE_FORCED_SVC_CHECK" Nagios command.

Schedules a forced active check of a particular service at "check_time".

The "check_time" argument is specified in time_t format (seconds since the UNIX epoch). 

Forced checks are performed regardless of what time it is (e.g. timeperiod restrictions are ignored) and whether or

not active checks are enabled on a service-specific or program-wide basis.

func ScheduleHostCheck 

func ScheduleHostCheck(
	host_name string,
	check_time time.Time,
) *livestatus.Command

ScheduleHostCheck creates a new "SCHEDULE_HOST_CHECK" Nagios command.

Schedules the next active check of a particular host at "check_time".

The "check_time" argument is specified in time_t format (seconds since the UNIX epoch).

Note that the host may not actually be checked at the time you specify.

This could occur for a number of reasons: active checks are disabled on a program-wide or service-specific basis, the host is already scheduled to be checked at an earlier time, etc.

If you want to force the host check to occur at the time you specify, look at the SCHEDULE_FORCED_HOST_CHECK command.

func ScheduleHostDowntime 

func ScheduleHostDowntime(
	host_name string,
	start_time time.Time,
	end_time time.Time,
	fixed bool,
	trigger_id int,
	duration time.Duration,
	author string,
	comment string,
) *livestatus.Command

ScheduleHostDowntime creates a new "SCHEDULE_HOST_DOWNTIME" Nagios command.

Schedules downtime for a specified host.

If the "fixed" argument is set to one (1), downtime will start and end at the times specified by the "start" and "end" arguments.

Otherwise, downtime will begin between the "start" and "end" times and last for "duration" seconds.

The "start" and "end" arguments are specified in time_t format (seconds since the UNIX epoch).

The specified host downtime can be triggered by another downtime entry if the "trigger_id" is set to the ID of another scheduled downtime entry.

Set the "trigger_id" argument to zero (0) if the downtime for the specified host should not be triggered by another downtime entry.

func ScheduleHostSvcChecks 

func ScheduleHostSvcChecks(
	host_name string,
	check_time time.Time,
) *livestatus.Command

ScheduleHostSvcChecks creates a new "SCHEDULE_HOST_SVC_CHECKS" Nagios command.

Schedules the next active check of all services on a particular host at "check_time".

The "check_time" argument is specified in time_t format (seconds since the UNIX epoch).

Note that the services may not actually be checked at the time you specify.

This could occur for a number of reasons: active checks are disabled on a program-wide or service-specific basis, the services are already scheduled to be checked at an earlier time, etc.

If you want to force the service checks to occur at the time you specify, look at the SCHEDULE_FORCED_HOST_SVC_CHECKS command.

func ScheduleHostSvcDowntime 

func ScheduleHostSvcDowntime(
	host_name string,
	start_time time.Time,
	end_time time.Time,
	fixed bool,
	trigger_id int,
	duration time.Duration,
	author string,
	comment string,
) *livestatus.Command

ScheduleHostSvcDowntime creates a new "SCHEDULE_HOST_SVC_DOWNTIME" Nagios command.

Schedules downtime for all services associated with a particular host.

If the "fixed" argument is set to one (1), downtime will start and end at the times specified by the "start" and "end" arguments.

Otherwise, downtime will begin between the "start" and "end" times and last for "duration" seconds.

The "start" and "end" arguments are specified in time_t format (seconds since the UNIX epoch).

The service downtime entries can be triggered by another downtime entry if the "trigger_id" is set to the ID of another scheduled downtime entry.

Set the "trigger_id" argument to zero (0) if the downtime for the services should not be triggered by another downtime entry.

func ScheduleHostgroupHostDowntime 

func ScheduleHostgroupHostDowntime(
	hostgroup_name string,
	start_time time.Time,
	end_time time.Time,
	fixed bool,
	trigger_id int,
	duration time.Duration,
	author string,
	comment string,
) *livestatus.Command

ScheduleHostgroupHostDowntime creates a new "SCHEDULE_HOSTGROUP_HOST_DOWNTIME" Nagios command.

Schedules downtime for all hosts in a specified hostgroup.

If the "fixed" argument is set to one (1), downtime will start and end at the times specified by the "start" and "end" arguments.

Otherwise, downtime will begin between the "start" and "end" times and last for "duration" seconds.

The "start" and "end" arguments are specified in time_t format (seconds since the UNIX epoch).

The host downtime entries can be triggered by another downtime entry if the "trigger_id" is set to the ID of another scheduled downtime entry.

Set the "trigger_id" argument to zero (0) if the downtime for the hosts should not be triggered by another downtime entry.

func ScheduleHostgroupSvcDowntime 

func ScheduleHostgroupSvcDowntime(
	hostgroup_name string,
	start_time time.Time,
	end_time time.Time,
	fixed bool,
	trigger_id int,
	duration time.Duration,
	author string,
	comment string,
) *livestatus.Command

ScheduleHostgroupSvcDowntime creates a new "SCHEDULE_HOSTGROUP_SVC_DOWNTIME" Nagios command.

Schedules downtime for all services associated with hosts in a specified servicegroup.

If the "fixed" argument is set to one (1), downtime will start and end at the times specified by the "start" and "end" arguments.

Otherwise, downtime will begin between the "start" and "end" times and last for "duration" seconds.

The "start" and "end" arguments are specified in time_t format (seconds since the UNIX epoch).

The service downtime entries can be triggered by another downtime entry if the "trigger_id" is set to the ID of another scheduled downtime entry.

Set the "trigger_id" argument to zero (0) if the downtime for the services should not be triggered by another downtime entry.

func ScheduleServicegroupHostDowntime 

func ScheduleServicegroupHostDowntime(
	servicegroup_name string,
	start_time time.Time,
	end_time time.Time,
	fixed bool,
	trigger_id int,
	duration time.Duration,
	author string,
	comment string,
) *livestatus.Command

ScheduleServicegroupHostDowntime creates a new "SCHEDULE_SERVICEGROUP_HOST_DOWNTIME" Nagios command.

Schedules downtime for all hosts that have services in a specified servicegroup.

If the "fixed" argument is set to one (1), downtime will start and end at the times specified by the "start" and "end" arguments.

Otherwise, downtime will begin between the "start" and "end" times and last for "duration" seconds.

The "start" and "end" arguments are specified in time_t format (seconds since the UNIX epoch).

The host downtime entries can be triggered by another downtime entry if the "trigger_id" is set to the ID of another scheduled downtime entry.

Set the "trigger_id" argument to zero (0) if the downtime for the hosts should not be triggered by another downtime entry.

func ScheduleServicegroupSvcDowntime 

func ScheduleServicegroupSvcDowntime(
	servicegroup_name string,
	start_time time.Time,
	end_time time.Time,
	fixed bool,
	trigger_id int,
	duration time.Duration,
	author string,
	comment string,
) *livestatus.Command

ScheduleServicegroupSvcDowntime creates a new "SCHEDULE_SERVICEGROUP_SVC_DOWNTIME" Nagios command.

Schedules downtime for all services in a specified servicegroup.

If the "fixed" argument is set to one (1), downtime will start and end at the times specified by the "start" and "end" arguments.

Otherwise, downtime will begin between the "start" and "end" times and last for "duration" seconds.

The "start" and "end" arguments are specified in time_t format (seconds since the UNIX epoch).

The service downtime entries can be triggered by another downtime entry if the "trigger_id" is set to the ID of another scheduled downtime entry.

Set the "trigger_id" argument to zero (0) if the downtime for the services should not be triggered by another downtime entry.

func ScheduleSvcCheck 

func ScheduleSvcCheck(
	host_name string,
	service_description string,
	check_time time.Time,
) *livestatus.Command

ScheduleSvcCheck creates a new "SCHEDULE_SVC_CHECK" Nagios command.

Schedules the next active check of a specified service at "check_time".

The "check_time" argument is specified in time_t format (seconds since the UNIX epoch).

Note that the service may not actually be checked at the time you specify.

This could occur for a number of reasons: active checks are disabled on a program-wide or service-specific basis, the service is already scheduled to be checked at an earlier time, etc.

If you want to force the service check to occur at the time you specify, look at the SCHEDULE_FORCED_SVC_CHECK command.

func ScheduleSvcDowntime 

func ScheduleSvcDowntime(
	host_name string,
	service_description string,
	start_time time.Time,
	end_time time.Time,
	fixed bool,
	trigger_id int,
	duration time.Duration,
	author string,
	comment string,
) *livestatus.Command

ScheduleSvcDowntime creates a new "SCHEDULE_SVC_DOWNTIME" Nagios command.

Schedules downtime for a specified service.

If the "fixed" argument is set to one (1), downtime will start and end at the times specified by the "start" and "end" arguments.

Otherwise, downtime will begin between the "start" and "end" times and last for "duration" seconds.

The "start" and "end" arguments are specified in time_t format (seconds since the UNIX epoch).

The specified service downtime can be triggered by another downtime entry if the "trigger_id" is set to the ID of another scheduled downtime entry.

Set the "trigger_id" argument to zero (0) if the downtime for the specified service should not be triggered by another downtime entry.

func SendCustomHostNotification 

func SendCustomHostNotification(
	host_name string,
	options int,
	author string,
	comment string,
) *livestatus.Command

SendCustomHostNotification creates a new "SEND_CUSTOM_HOST_NOTIFICATION" Nagios command.

Allows you to send a custom host notification.

Very useful in dire situations, emergencies or to communicate with all admins that are responsible for a particular host.

When the host notification is sent out, the $NOTIFICATIONTYPE$ macro will be set to "CUSTOM".

The <options> field is a logical OR of the following integer values that affect aspects of the notification that are sent out: 0 = No option (default), 1 = Broadcast (send notification to all normal and all escalated contacts for the host), 2 = Forced (notification is sent out regardless of current time, whether or not notifications are enabled, etc.), 4 = Increment current notification # for the host (this is not done by default for custom notifications).

The comment field can be used with the $NOTIFICATIONCOMMENT$ macro in notification commands.

func SendCustomSvcNotification 

func SendCustomSvcNotification(
	host_name string,
	service_description string,
	options int,
	author string,
	comment string,
) *livestatus.Command

SendCustomSvcNotification creates a new "SEND_CUSTOM_SVC_NOTIFICATION" Nagios command.

Allows you to send a custom service notification.

Very useful in dire situations, emergencies or to communicate with all admins that are responsible for a particular service.

When the service notification is sent out, the $NOTIFICATIONTYPE$ macro will be set to "CUSTOM".

The <options> field is a logical OR of the following integer values that affect aspects of the notification that are sent out: 0 = No option (default), 1 = Broadcast (send notification to all normal and all escalated contacts for the service), 2 = Forced (notification is sent out regardless of current time, whether or not notifications are enabled, etc.), 4 = Increment current notification # for the service(this is not done by default for custom notifications). 

The comment field can be used with the

$NOTIFICATIONCOMMENT$ macro in notification commands.

func SetHostNotificationNumber 

func SetHostNotificationNumber(
	host_name string,
	notification_number int,
) *livestatus.Command

SetHostNotificationNumber creates a new "SET_HOST_NOTIFICATION_NUMBER" Nagios command.

Sets the current notification number for a particular host.

A value of 0 indicates that no notification has yet been sent for the current host problem.

Useful for forcing an escalation (based on notification number) or replicating notification information in redundant monitoring environments. Notification numbers greater than zero have no noticeable affect on the notification process if the host is currently in an UP state.

func SetSvcNotificationNumber 

func SetSvcNotificationNumber(
	host_name string,
	service_description string,
	notification_number int,
) *livestatus.Command

SetSvcNotificationNumber creates a new "SET_SVC_NOTIFICATION_NUMBER" Nagios command.

Sets the current notification number for a particular service.

A value of 0 indicates that no notification has yet been sent for the current service problem.

Useful for forcing an escalation (based on notification number) or replicating notification information in redundant monitoring environments. Notification numbers greater than zero have no noticeable affect on the notification process if the service is currently in an OK state.

func ShutdownProgram 

func ShutdownProgram() *livestatus.Command

ShutdownProgram creates a new "SHUTDOWN_PROGRAM" Nagios command.

Shuts down the Nagios process.

func StartAcceptingPassiveHostChecks 

func StartAcceptingPassiveHostChecks() *livestatus.Command

StartAcceptingPassiveHostChecks creates a new "START_ACCEPTING_PASSIVE_HOST_CHECKS" Nagios command.

Enables acceptance and processing of passive host checks on a program-wide basis.

func StartAcceptingPassiveSvcChecks 

func StartAcceptingPassiveSvcChecks() *livestatus.Command

StartAcceptingPassiveSvcChecks creates a new "START_ACCEPTING_PASSIVE_SVC_CHECKS" Nagios command.

Enables passive service checks on a program-wide basis.

func StartExecutingHostChecks 

func StartExecutingHostChecks() *livestatus.Command

StartExecutingHostChecks creates a new "START_EXECUTING_HOST_CHECKS" Nagios command.

Enables active host checks on a program-wide basis.

func StartExecutingSvcChecks 

func StartExecutingSvcChecks() *livestatus.Command

StartExecutingSvcChecks creates a new "START_EXECUTING_SVC_CHECKS" Nagios command.

Enables active checks of services on a program-wide basis.

func StartObsessingOverHost 

func StartObsessingOverHost(
	host_name string,
) *livestatus.Command

StartObsessingOverHost creates a new "START_OBSESSING_OVER_HOST" Nagios command.

Enables processing of host checks via the OCHP command for the specified host.

func StartObsessingOverHostChecks 

func StartObsessingOverHostChecks() *livestatus.Command

StartObsessingOverHostChecks creates a new "START_OBSESSING_OVER_HOST_CHECKS" Nagios command.

Enables processing of host checks via the OCHP command on a program-wide basis.

func StartObsessingOverSvc 

func StartObsessingOverSvc(
	host_name string,
	service_description string,
) *livestatus.Command

StartObsessingOverSvc creates a new "START_OBSESSING_OVER_SVC" Nagios command.

Enables processing of service checks via the OCSP command for the specified service.

func StartObsessingOverSvcChecks 

func StartObsessingOverSvcChecks() *livestatus.Command

StartObsessingOverSvcChecks creates a new "START_OBSESSING_OVER_SVC_CHECKS" Nagios command.

Enables processing of service checks via the OCSP command on a program-wide basis.

func StopAcceptingPassiveHostChecks 

func StopAcceptingPassiveHostChecks() *livestatus.Command

StopAcceptingPassiveHostChecks creates a new "STOP_ACCEPTING_PASSIVE_HOST_CHECKS" Nagios command.

Disables acceptance and processing of passive host checks on a program-wide basis.

func StopAcceptingPassiveSvcChecks 

func StopAcceptingPassiveSvcChecks() *livestatus.Command

StopAcceptingPassiveSvcChecks creates a new "STOP_ACCEPTING_PASSIVE_SVC_CHECKS" Nagios command.

Disables passive service checks on a program-wide basis.

func StopExecutingHostChecks 

func StopExecutingHostChecks() *livestatus.Command

StopExecutingHostChecks creates a new "STOP_EXECUTING_HOST_CHECKS" Nagios command.

Disables active host checks on a program-wide basis.

func StopExecutingSvcChecks 

func StopExecutingSvcChecks() *livestatus.Command

StopExecutingSvcChecks creates a new "STOP_EXECUTING_SVC_CHECKS" Nagios command.

Disables active checks of services on a program-wide basis.

func StopObsessingOverHost 

func StopObsessingOverHost(
	host_name string,
) *livestatus.Command

StopObsessingOverHost creates a new "STOP_OBSESSING_OVER_HOST" Nagios command.

Disables processing of host checks via the OCHP command for the specified host.

func StopObsessingOverHostChecks 

func StopObsessingOverHostChecks() *livestatus.Command

StopObsessingOverHostChecks creates a new "STOP_OBSESSING_OVER_HOST_CHECKS" Nagios command.

Disables processing of host checks via the OCHP command on a program-wide basis.

func StopObsessingOverSvc 

func StopObsessingOverSvc(
	host_name string,
	service_description string,
) *livestatus.Command

StopObsessingOverSvc creates a new "STOP_OBSESSING_OVER_SVC" Nagios command.

Disables processing of service checks via the OCSP command for the specified service.

func StopObsessingOverSvcChecks 

func StopObsessingOverSvcChecks() *livestatus.Command

StopObsessingOverSvcChecks creates a new "STOP_OBSESSING_OVER_SVC_CHECKS" Nagios command.

Disables processing of service checks via the OCSP command on a program-wide basis.

Types

This section is empty.

Source Files

View all Source files

Directories

Path Synopsis
internal
generate-commands

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.