locationmanagement

package
v2.61.11 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Jul 7, 2024 License: MIT Imports: 6 Imported by: 3

Documentation

Index

Constants

This section is empty.

Variables

This section is empty.

Functions

func Delete added in v2.61.0 

func Delete(service *services.Service, locationID int) (*http.Response, error)

Types

type DynamiclocationGroups added in v2.61.7 

type DynamiclocationGroups struct {
	// Identifier that uniquely identifies an entity
	ID int `json:"id,omitempty"`

	// The configured name of the entity
	Name string `json:"name,omitempty"`
}

type Location 

type Location struct {
	// Identifier that uniquely identifies an entity
	ID int `json:"id,omitempty"`

	// The configured name of the entity
	Name       string                 `json:"name,omitempty"`
	Extensions map[string]interface{} `json:"extensions,omitempty"`
}

type Locations 

type Locations struct {
	// Location ID
	ID int `json:"id,omitempty"`

	// Location Name
	Name string `json:"name,omitempty"`

	// Parent Location ID. If this ID does not exist or is 0, it is implied that it is a parent location. Otherwise, it is a sub-location whose parent has this ID. x-applicableTo: SUB
	ParentID int `json:"parentId,omitempty"`

	// Upload bandwidth in kbps. The value 0 implies no Bandwidth Control enforcement
	UpBandwidth int `json:"upBandwidth,omitempty"`

	// Download bandwidth in kbps. The value 0 implies no Bandwidth Control enforcement
	DnBandwidth int `json:"dnBandwidth,omitempty"`

	// Country
	Country string `json:"country,omitempty"`

	State string `json:"state,omitempty"`

	// Language
	Language string `json:"language,omitempty"`

	// Timezone of the location. If not specified, it defaults to GMT.
	TZ string `json:"tz,omitempty"`

	ChildCount int `json:"childCount,omitempty"`

	MatchInChild bool `json:"matchInChild,omitempty"`

	//
	GeoOverride bool `json:"geoOverride,omitempty"`

	// For locations: IP addresses of the egress points that are provisioned in the Zscaler Cloud. Each entry is a single IP address (e.g., 238.10.33.9).
	// For sub-locations: Egress, internal, or GRE tunnel IP addresses. Each entry is either a single IP address, CIDR (e.g., 10.10.33.0/24), or range (e.g., 10.10.33.1-10.10.33.10)).
	IPAddresses []string `json:"ipAddresses,omitempty"`

	// IP ports that are associated with the location
	Ports string `json:"ports,omitempty"`

	// VPN User Credentials that are associated with the location.
	VPNCredentials []VPNCredentials `json:"vpnCredentials,omitempty"`

	// Enforce Authentication. Required when ports are enabled, IP Surrogate is enabled, or Kerberos Authentication is enabled.
	AuthRequired bool `json:"authRequired"`

	// Enable Basic Authentication at the location
	BasicAuthEnabled bool `json:"basicAuthEnabled"`

	// Enable Digest Authentication at the location
	DigestAuthEnabled bool `json:"digestAuthEnabled"`

	// Enable Kerberos Authentication at the location
	KerberosAuth bool `json:"kerberosAuth"`

	// Enable IOT Discovery at the location
	IOTDiscoveryEnabled bool `json:"iotDiscoveryEnabled"`

	IOTEnforcePolicySet bool `json:"iotEnforcePolicySet"`

	CookiesAndProxy bool `json:"cookiesAndProxy"`

	// This parameter was deprecated and no longer has an effect on SSL policy. It remains supported in the API payload in order to maintain backwards compatibility with existing scripts, but it will be removed in future.
	// Enable SSL Inspection. Set to true in order to apply your SSL Inspection policy to HTTPS traffic in the location and inspect HTTPS transactions for data leakage, malicious content, and viruses.
	SSLScanEnabled bool `json:"sslScanEnabled"`

	// This parameter was deprecated and no longer has an effect on SSL policy. It remains supported in the API payload in order to maintain backwards compatibility with existing scripts, but it will be removed in future.
	// Enable Zscaler App SSL Setting. When set to true, the Zscaler App SSL Scan Setting takes effect, irrespective of the SSL policy that is configured for the location.
	ZappSSLScanEnabled bool `json:"zappSSLScanEnabled"`

	// Enable XFF Forwarding for a location. When set to true, traffic is passed to Zscaler Cloud via the X-Forwarded-For (XFF) header.
	// Note: For sub-locations, this attribute is a read-only field as the value is inherited from the parent location.
	XFFForwardEnabled bool `json:"xffForwardEnabled"`

	// Enable Surrogate IP. When set to true, users are mapped to internal device IP addresses
	SurrogateIP bool `json:"surrogateIP"`

	// Idle Time to Disassociation. The user mapping idle time (in minutes) is required if a Surrogate IP is enabled
	IdleTimeInMinutes int `json:"idleTimeInMinutes,omitempty"`

	// Display Time Unit. The time unit to display for IP Surrogate idle time to disassociation
	DisplayTimeUnit string `json:"displayTimeUnit,omitempty"`

	// Enforce Surrogate IP for Known Browsers. When set to true, IP Surrogate is enforced for all known browsers
	SurrogateIPEnforcedForKnownBrowsers bool `json:"surrogateIPEnforcedForKnownBrowsers"`

	// Refresh Time for re-validation of Surrogacy. The surrogate refresh time (in minutes) to re-validate the IP surrogates
	SurrogateRefreshTimeInMinutes int `json:"surrogateRefreshTimeInMinutes,omitempty"`

	// Display Refresh Time Unit. The time unit to display for refresh time for re-validation of surrogacy
	SurrogateRefreshTimeUnit string `json:"surrogateRefreshTimeUnit,omitempty"`

	// Enable Firewall. When set to true, Firewall is enabled for the location.
	OFWEnabled bool `json:"ofwEnabled"`

	// Enable IPS Control. When set to true, IPS Control is enabled for the location if Firewall is enabled.
	IPSControl bool `json:"ipsControl"`

	// Enable AUP. When set to true, AUP is enabled for the location
	AUPEnabled bool `json:"aupEnabled"`

	// Enable Caution. When set to true, a caution notifcation is enabled for the location
	CautionEnabled bool `json:"cautionEnabled"`

	// For First Time AUP Behavior, Block Internet Access. When set, all internet access (including non-HTTP traffic) is disabled until the user accepts the AUP.
	AUPBlockInternetUntilAccepted bool `json:"aupBlockInternetUntilAccepted"`

	// For First Time AUP Behavior, Force SSL Inspection. When set, Zscaler forces SSL Inspection in order to enforce AUP for HTTPS traffic.
	AUPForceSSLInspection bool `json:"aupForceSslInspection"`

	// Custom AUP Frequency. Refresh time (in days) to re-validate the AUP.
	AUPTimeoutInDays int `json:"aupTimeoutInDays,omitempty"`

	// Profile tag that specifies the location traffic type. If not specified, this tag defaults to "Unassigned".
	Profile string `json:"profile,omitempty"`

	ExcludeFromDynamicGroups bool `json:"excludeFromDynamicGroups,omitempty"`

	ExcludeFromManualGroups bool `json:"excludeFromManualGroups,omitempty"`

	// Additional notes or information regarding the location or sub-location. The description cannot exceed 1024 characters.
	Description string `json:"description,omitempty"`

	// If set to true, indicates that this is a default sub-location created by the Zscaler service to accommodate IPv4 addresses that are not part of any user-defined sub-locations. The default sub-location is created with the name Other and it can be renamed, if required.
	OtherSubLocation bool `json:"otherSubLocation,omitempty"`

	// If set to true, indicates that this is a default sub-location created by the Zscaler service to accommodate IPv6 addresses that are not part of any user-defined sub-locations. The default sub-location is created with the name Other6 and it can be renamed, if required. This field is applicable only if ipv6Enabled is set is true.
	Other6SubLocation bool `json:"other6SubLocation,omitempty"`

	ECLocation bool `json:"ecLocation,omitempty"`

	// If set to true, IPv6 is enabled for the location and IPv6 traffic from the location can be forwarded to the Zscaler service to enforce security policies.
	IPv6Enabled bool `json:"ipv6Enabled,omitempty"`

	// (Optional) Name-ID pair of the NAT64 prefix configured as the DNS64 prefix for the location. If specified, the DNS64 prefix is used for the IP addresses that reside in this location. If not specified, a prefix is selected from the set of supported prefixes. This field is applicable only if ipv6Enabled is set is true.
	// Before you can configure a DNS64 prefix, you must send a GET request to /ipv6config/nat64prefix to retrieve the IDs of NAT64 prefixes, which can be configured as the DNS64 prefix.
	IPv6Dns64Prefix bool `json:"ipv6Dns64Prefix,omitempty"`

	DynamiclocationGroups []common.IDNameExtensions `json:"dynamiclocationGroups"`
	StaticLocationGroups  []common.IDNameExtensions `json:"staticLocationGroups"`
}

Gets locations only, not sub-locations. When a location matches the given search parameter criteria only its parent location is included in the result set, not its sub-locations.

func Create added in v2.61.0 

func Create(service *services.Service, locations *Locations) (*Locations, error)

func GetAll added in v2.61.0 

func GetAll(service *services.Service) ([]Locations, error)

func GetAllSublocations added in v2.61.0 

func GetAllSublocations(service *services.Service) ([]Locations, error)

func GetLocation added in v2.61.0 

func GetLocation(service *services.Service, locationID int) (*Locations, error)

Gets locations only, not sub-locations. When a location matches the given search parameter criteria only its parent location is included in the result set, not its sub-locations.

func GetLocationByName added in v2.61.0 

func GetLocationByName(service *services.Service, locationName string) (*Locations, error)

GetLocationByName gets a location by its name.

func GetLocationOrSublocationByID added in v2.61.0 

func GetLocationOrSublocationByID(service *services.Service, id int) (*Locations, error)

GetLocationOrSublocationByID gets a location or sub-location by its ID.

func GetLocationOrSublocationByName added in v2.61.0 

func GetLocationOrSublocationByName(service *services.Service, name string) (*Locations, error)

GetLocationOrSublocationByName gets a location or sub-location by its name.

func GetSubLocation added in v2.61.0 

func GetSubLocation(service *services.Service, locationID, subLocationID int) (*Locations, error)

GetSubLocation gets a sub-location by its ID and parent ID.

func GetSubLocationByName added in v2.61.0 

func GetSubLocationByName(service *services.Service, subLocatioName string) (*Locations, error)

GetSubLocationByName gets a sub-location by its name (fetches all locations's sub-location to find a match).

func GetSubLocationByNames added in v2.61.0 

func GetSubLocationByNames(service *services.Service, locationName, subLocatioName string) (*Locations, error)

GetSubLocationByNames gets a sub-location by its name and parent location name

func GetSubLocationBySubID added in v2.61.0 

func GetSubLocationBySubID(service *services.Service, subLocationID int) (*Locations, error)

GetSubLocationBySubID gets a sub-location by its ID (fetches all locations's sub-location to find a match).

func GetSublocations added in v2.61.0 

func GetSublocations(service *services.Service, locationID int) ([]Locations, error)

GetSublocations gets all sub-locations for a given location ID.

func Update added in v2.61.0 

func Update(service *services.Service, locationID int, locations *Locations) (*Locations, *http.Response, error)

type ManagedBy 

type ManagedBy struct {
	// Identifier that uniquely identifies an entity
	ID int `json:"id,omitempty"`

	// The configured name of the entity
	Name       string                 `json:"name,omitempty"`
	Extensions map[string]interface{} `json:"extensions,omitempty"`
}

type StaticLocationGroups added in v2.61.7 

type StaticLocationGroups struct {
	// Identifier that uniquely identifies an entity
	ID int `json:"id,omitempty"`

	// The configured name of the entity
	Name string `json:"name,omitempty"`
}

type VPNCredentials 

type VPNCredentials struct {
	// VPN credential id
	ID int `json:"id,omitempty"`

	// VPN authentication type (i.e., how the VPN credential is sent to the server). It is not modifiable after VpnCredential is created.
	// Note: Zscaler no longer supports adding a new XAUTH VPN credential, but existing entries can be edited or deleted using the respective endpoints.
	Type string `json:"type,omitempty"`

	// Fully Qualified Domain Name. Applicable only to UFQDN or XAUTH (or HOSTED_MOBILE_USERS) auth type.
	FQDN string `json:"fqdn,omitempty"`

	// Static IP address for VPN that is self-provisioned or provisioned by Zscaler. This is a required field for IP auth type and is not applicable to other auth types.
	// Note: If you want Zscaler to provision static IP addresses for your organization, contact Zscaler Support.
	IPAddress string `json:"ipAddress"`

	// Pre-shared key. This is a required field for UFQDN and IP auth type.
	PreSharedKey string `json:"preSharedKey,omitempty"`

	// Additional information about this VPN credential.
	Comments string `json:"comments,omitempty"`

	// Location that is associated to this VPN credential. Non-existence means not associated to any location.
	Location []Location `json:"location,omitempty"`

	// SD-WAN Partner that manages the location. If a partner does not manage the location, this is set to Self.
	ManagedBy []ManagedBy `json:"managedBy,omitempty"`
}

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.