ethereum

README

Go PlatON

Welcome to the PlatON-Go source code repository! This is an Ethereum-based、high-performance and high-security implementation of the PlatON protocol. Most of peculiarities according the PlatON's whitepaper has been developed.

Building the source

The requirements to build PlatON-Go are:

• OS:Windows10/Ubuntu18.04
• Golang :version 1.11+
• cmake :version 3.0+
• g++&gcc :version 7.4.0+

The 'cmake' and 'gcc&g++' are usually included in Ubuntu18.04

In addition, the following libraries needs to be installed manually

sudo apt install libgmp-dev libssl-dev

Then, clone the repository

git clone https://github.com/PlatONnetwork/PlatON-Go.git --recursive

Switch to the PlatON-Go repository root directory.

Ubuntu:

make all

Windows:

go run build\ci.go install 

The resulting binary will be placed in '$PlatON-Go/build/bin'(Ubuntu) or in '%GOPATH%\bin'(Windows) .

Getting Started

The project comes with several executables found in the build/bin directory.

Command	Description
platon	Our main PlatON CLI client. It is the entry point into the PlatON network
keytool	a key related tool.

Generate the keys

Each node requires two pairs of public&private keys, the one is called node's keypair, it's generated based on the secp256k1 curve for marking the node identity and signning the block, and the other is called node's blskeypair, it's based on the BLS_12_381 curve and is used for consensus verifing. These two pairs of public-private key need to be generated by the keytool tool.

Switch to the directory where contains 'keytool.exe'(Windows) or 'keytool'(Ubuntu). Node's keypair(Ubuntu for example):

keytool genkeypair
Address   :  0xA9051ACCa5d9a7592056D07659f3F607923173ad
PrivateKey:  1abd1200759d4693f4510fbcf7d5caad743b11b5886dc229da6c0747061fca36
PublicKey :  8917c748513c23db46d23f531cc083d2f6001b4cc2396eb8412d73a3e4450ffc5f5235757abf9873de469498d8cf45f5bb42c215da79d59940e17fcb22dfc127

Node's blskeypair:：

keytool genblskeypair
PrivateKey:  7747ec6876bbf8ca0934f05e45917b4213afc5814639355868bbf06d0b3e0f19
PublicKey :  e5eb9915ed2b5fd52cf5ff760873a75a8562956e176968f3cbe5ea2b22e03a7b5efc07fdd5ad66d433b404cb880b560bed6295fa79f8fa649588be02231de2e70a782751dc28dbf516b7bb5d52053b5cdf985d8961a5baafa467e8dda55fe981

Note: The PublicKey generated by the 'genkeypair' command is the NodeID we needed, the PrivateKey is the corresponding node private key, and the PublicKey generated by the 'genblskeypair' command is the node BLS PublicKey, used in the staking and consensus process, PrivateKey is the Node BLS PrivateKey, these two keypairs are common in different operating systems, that is, the public and private keys generated in Windows above, can be used in Ubuntu.

store the two private keys in files:

mkdir -p ./data
touch ./data/nodekey 
echo "{your-nodekey}" > ./data/nodekey
touch ./data/blskey
echo "{your-blskey}" > ./data/blskey

Generate a wallet

platon --datadir ./data account new
Your new account is locked with a password. Please give a password. Do not forget this password.
Passphrase:
Repeat passphrase:
Address: {566c274db7ac6d38da2b075b4ae41f4a5c481d21}

Do remember the password

Connect to the PlatON network

Options	description
--identity	Custom node name
--datadir	Data directory for the databases and keystore
--rpcaddr	HTTP-RPC server listening interface (default: "localhost")
--rpcport	HTTP-RPC server listening port (default: 6789)
--rpcapi	API's offered over the HTTP-RPC interface
--rpc	Enable the HTTP-RPC server
--nodiscover	Disables the peer discovery mechanism (manual peer addition)
--nodekey	P2P node key file
--cbft.blskey	BLS key file

Run the following command to launch a PlatON node connecting to the PlatON's mainnet:

$ ./platon --identity "platon" --datadir ./data --port {your-p2p-port} --rpcaddr 127.0.0.1 --rpcport {your-rpc-port} --rpcapi "db,platon,net,web3,admin,personal" --rpc --nodiscover --nodekey ./data/nodekey --cbft.blskey ./data/blskey

OK, it seems that the chain is running correctly, we can check it as follow:

platon attach http://127.0.0.1:6789
Welcome to the PlatON JavaScript console!

instance: PlatONnetwork/platon/v0.7.3-unstable/linux-amd64/go1.10.4
at block: 26 (Wed, 15 Dec 51802 20:22:44 CST)
 datadir: /home/jht/node1/data
 modules: admin:1.0 debug:1.0 net:1.0 personal:1.0 platon:1.0 rpc:1.0 web3:1.0

> platon.blockNumber
29

For more information, please visit our Docs.

Contributing to PlatON-Go

All of codes for PlatON-Go are open source and contributing are very welcome! Before beginning, please take a look at our contributing guidelines. You can also open an issue by clicking here.

Support

If you have any questions or suggestions please contact us at support@platon.network.

License

The PlatON-Go library (i.e. all code outside of the cmd directory) is licensed under the GNU Lesser General Public License v3.0, also included in our repository in the COPYING.LESSER file.

The PlatON-Go binaries (i.e. all code inside of the cmd directory) is licensed under the GNU General Public License v3.0, also included in our repository in the COPYING file.

Documentation

Overview

Package ethereum defines interfaces for interacting with Ethereum.

Index

• Variables
• type CallMsg
• type ChainReader
• type ChainStateReader
• type ChainSyncReader
• type ContractCaller
• type FilterQuery
• type GasEstimator
• type GasPricer
• type LogFilterer
• type PendingContractCaller
• type PendingStateEventer
• type PendingStateReader
• type Subscription
• type SyncProgress
• type TransactionReader
• type TransactionSender

Variables

var NotFound = errors.New("not found")

NotFound is returned by API methods if the requested item does not exist.

Types

type CallMsg

type CallMsg struct {
	From     common.Address  // the sender of the 'transaction'
	To       *common.Address // the destination contract (nil for contract creation)
	Gas      uint64          // if 0, the call executes with near-infinite gas
	GasPrice *big.Int        // wei <-> gas exchange ratio
	Value    *big.Int        // amount of wei sent along with the call
	Data     []byte          // input data, usually an ABI-encoded contract method invocation
}

CallMsg contains parameters for contract calls.

type ChainReader

type ChainReader interface {
	BlockByHash(ctx context.Context, hash common.Hash) (*types.Block, error)
	BlockByNumber(ctx context.Context, number *big.Int) (*types.Block, error)
	HeaderByHash(ctx context.Context, hash common.Hash) (*types.Header, error)
	HeaderByNumber(ctx context.Context, number *big.Int) (*types.Header, error)
	TransactionCount(ctx context.Context, blockHash common.Hash) (uint, error)
	TransactionInBlock(ctx context.Context, blockHash common.Hash, index uint) (*types.Transaction, error)

	// This method subscribes to notifications about changes of the head block of
	// the canonical chain.
	SubscribeNewHead(ctx context.Context, ch chan<- *types.Header) (Subscription, error)
}

ChainReader provides access to the blockchain. The methods in this interface access raw data from either the canonical chain (when requesting by block number) or any blockchain fork that was previously downloaded and processed by the node. The block number argument can be nil to select the latest canonical block. Reading block headers should be preferred over full blocks whenever possible.

The returned error is NotFound if the requested item does not exist.

type ChainStateReader

type ChainStateReader interface {
	BalanceAt(ctx context.Context, account common.Address, blockNumber *big.Int) (*big.Int, error)
	StorageAt(ctx context.Context, account common.Address, key common.Hash, blockNumber *big.Int) ([]byte, error)
	CodeAt(ctx context.Context, account common.Address, blockNumber *big.Int) ([]byte, error)
	NonceAt(ctx context.Context, account common.Address, blockNumber *big.Int) (uint64, error)
}

ChainStateReader wraps access to the state trie of the canonical blockchain. Note that implementations of the interface may be unable to return state values for old blocks. In many cases, using CallContract can be preferable to reading raw contract storage.

type ChainSyncReader

type ChainSyncReader interface {
	SyncProgress(ctx context.Context) (*SyncProgress, error)
}

ChainSyncReader wraps access to the node's current sync status. If there's no sync currently running, it returns nil.

type ContractCaller

type ContractCaller interface {
	CallContract(ctx context.Context, call CallMsg, blockNumber *big.Int) ([]byte, error)
}

A ContractCaller provides contract calls, essentially transactions that are executed by the EVM but not mined into the blockchain. ContractCall is a low-level method to execute such calls. For applications which are structured around specific contracts, the abigen tool provides a nicer, properly typed way to perform calls.

type FilterQuery

type FilterQuery struct {
	BlockHash *common.Hash     // used by eth_getLogs, return logs only from block with this hash
	FromBlock *big.Int         // beginning of the queried range, nil means genesis block
	ToBlock   *big.Int         // end of the range, nil means latest block
	Addresses []common.Address // restricts matches to events created by specific contracts

	// The Topic list restricts matches to particular event topics. Each event has a list
	// of topics. Topics matches a prefix of that list. An empty element slice matches any
	// topic. Non-empty elements represent an alternative that matches any of the
	// contained topics.
	//
	// Examples:
	// {} or nil          matches any topic list
	// {{A}}              matches topic A in first position
	// {{}, {B}}          matches any topic in first position, B in second position
	// {{A}, {B}}         matches topic A in first position, B in second position
	// {{A, B}}, {C, D}}  matches topic (A OR B) in first position, (C OR D) in second position
	Topics [][]common.Hash
}

FilterQuery contains options for contract log filtering.

type GasEstimator

type GasEstimator interface {
	EstimateGas(ctx context.Context, call CallMsg) (uint64, error)
}

GasEstimator wraps EstimateGas, which tries to estimate the gas needed to execute a specific transaction based on the pending state. There is no guarantee that this is the true gas limit requirement as other transactions may be added or removed by miners, but it should provide a basis for setting a reasonable default.

type GasPricer

type GasPricer interface {
	SuggestGasPrice(ctx context.Context) (*big.Int, error)
}

GasPricer wraps the gas price oracle, which monitors the blockchain to determine the optimal gas price given current fee market conditions.

type LogFilterer

type LogFilterer interface {
	FilterLogs(ctx context.Context, q FilterQuery) ([]types.Log, error)
	SubscribeFilterLogs(ctx context.Context, q FilterQuery, ch chan<- types.Log) (Subscription, error)
}

LogFilterer provides access to contract log events using a one-off query or continuous event subscription.

Logs received through a streaming query subscription may have Removed set to true, indicating that the log was reverted due to a chain reorganisation.

type PendingContractCaller

type PendingContractCaller interface {
	PendingCallContract(ctx context.Context, call CallMsg) ([]byte, error)
}

PendingContractCaller can be used to perform calls against the pending state.

type PendingStateEventer

type PendingStateEventer interface {
	SubscribePendingTransactions(ctx context.Context, ch chan<- *types.Transaction) (Subscription, error)
}

A PendingStateEventer provides access to real time notifications about changes to the pending state.

type PendingStateReader

type PendingStateReader interface {
	PendingBalanceAt(ctx context.Context, account common.Address) (*big.Int, error)
	PendingStorageAt(ctx context.Context, account common.Address, key common.Hash) ([]byte, error)
	PendingCodeAt(ctx context.Context, account common.Address) ([]byte, error)
	PendingNonceAt(ctx context.Context, account common.Address) (uint64, error)
	PendingTransactionCount(ctx context.Context) (uint, error)
}

A PendingStateReader provides access to the pending state, which is the result of all known executable transactions which have not yet been included in the blockchain. It is commonly used to display the result of ’unconfirmed’ actions (e.g. wallet value transfers) initiated by the user. The PendingNonceAt operation is a good way to retrieve the next available transaction nonce for a specific account.

type Subscription

type Subscription interface {
	// Unsubscribe cancels the sending of events to the data channel
	// and closes the error channel.
	Unsubscribe()
	// Err returns the subscription error channel. The error channel receives
	// a value if there is an issue with the subscription (e.g. the network connection
	// delivering the events has been closed). Only one value will ever be sent.
	// The error channel is closed by Unsubscribe.
	Err() <-chan error
}

Subscription represents an event subscription where events are delivered on a data channel.

type SyncProgress

type SyncProgress struct {
	StartingBlock uint64 // Block number where sync began
	CurrentBlock  uint64 // Current block number where sync is at
	HighestBlock  uint64 // Highest alleged block number in the chain
	PulledStates  uint64 // Number of state trie entries already downloaded
	KnownStates   uint64 // Total number of state trie entries known about
}

SyncProgress gives progress indications when the node is synchronising with the Ethereum network.

type TransactionReader

type TransactionReader interface {
	// TransactionByHash checks the pool of pending transactions in addition to the
	// blockchain. The isPending return value indicates whether the transaction has been
	// mined yet. Note that the transaction may not be part of the canonical chain even if
	// it's not pending.
	TransactionByHash(ctx context.Context, txHash common.Hash) (tx *types.Transaction, isPending bool, err error)
	// TransactionReceipt returns the receipt of a mined transaction. Note that the
	// transaction may not be included in the current canonical chain even if a receipt
	// exists.
	TransactionReceipt(ctx context.Context, txHash common.Hash) (*types.Receipt, error)
}

TransactionReader provides access to past transactions and their receipts. Implementations may impose arbitrary restrictions on the transactions and receipts that can be retrieved. Historic transactions may not be available.

Avoid relying on this interface if possible. Contract logs (through the LogFilterer interface) are more reliable and usually safer in the presence of chain reorganisations.

The returned error is NotFound if the requested item does not exist.

type TransactionSender

type TransactionSender interface {
	SendTransaction(ctx context.Context, tx *types.Transaction) error
}

TransactionSender wraps transaction sending. The SendTransaction method injects a signed transaction into the pending transaction pool for execution. If the transaction was a contract creation, the TransactionReceipt method can be used to retrieve the contract address after the transaction has been mined.

The transaction must be signed and have a valid nonce to be included. Consumers of the API can use package accounts to maintain local private keys and need can retrieve the next available nonce using PendingNonceAt.