Documentation ¶
Index ¶
Constants ¶
const ( Wei = 1 GWei = 1e9 Ether = 1e18 )
These are the multipliers for ether denominations. Example: To get the wei value of an amount in 'gwei', use
new(big.Int).Mul(value, big.NewInt(params.GWei))
const ( // BloomBitsBlocks is the number of blocks a single bloom bit section vector // contains on the server side. BloomBitsBlocks uint64 = 4096 // BloomBitsBlocksClient is the number of blocks a single bloom bit section vector // contains on the light client side BloomBitsBlocksClient uint64 = 32768 // BloomConfirms is the number of confirmation blocks before a bloom section is // considered probably final and its rotated bits are calculated. BloomConfirms = 256 // CHTFrequency is the block frequency for creating CHTs CHTFrequency = 32768 // BloomTrieFrequency is the block frequency for creating BloomTrie on both // server/client sides. BloomTrieFrequency = 32768 // HelperTrieConfirmations is the number of confirmations before a client is expected // to have the given HelperTrie available. HelperTrieConfirmations = 2048 // HelperTrieProcessConfirmations is the number of confirmations before a HelperTrie // is generated HelperTrieProcessConfirmations = 256 // CheckpointFrequency is the block frequency for creating checkpoint CheckpointFrequency = 32768 // CheckpointProcessConfirmations is the number before a checkpoint is generated CheckpointProcessConfirmations = 256 // FullImmutabilityThreshold is the number of blocks after which a chain segment is // considered immutable (i.e. soft finality). It is used by the downloader as a // hard limit against deep ancestors, by the blockchain against deep reorgs, by // the freezer as the cutoff threshold and by clique as the snapshot trust limit. FullImmutabilityThreshold = 90000 // LightImmutabilityThreshold is the number of blocks after which a header chain // segment is considered immutable for light client(i.e. soft finality). It is used by // the downloader as a hard limit against deep ancestors, by the blockchain against deep // reorgs, by the light pruner as the pruning validity guarantee. LightImmutabilityThreshold = 30000 )
const ( GenesisGasLimit uint64 = 4712388 // Gas limit of the Genesis block. MaxGasLimit uint64 = 0x7fffffffffffffff // Maximum the gas limit (2^63-1). ExpByteGas uint64 = 10 // Times ceil(log256(exponent)) for the EXP instruction. SloadGas uint64 = 50 // Multiplied by the number of 32-byte words that are copied (round up) for any *COPY operation and added. CallValueTransferGas uint64 = 9000 // Paid for CALL when the value transfer is non-zero. CallNewAccountGas uint64 = 25000 // Paid for CALL when the destination address didn't exist prior. TxGas uint64 = 21000 // Per transaction not creating a contract. NOTE: Not payable on data of calls between transactions. TxGasContractCreation uint64 = 53000 // Per transaction that creates a contract. NOTE: Not payable on data of calls between transactions. TxDataZeroGas uint64 = 4 // Per byte of data attached to a transaction that equals zero. NOTE: Not payable on data of calls between transactions. QuadCoeffDiv uint64 = 512 // Divisor for the quadratic particle of the memory cost equation. LogDataGas uint64 = 8 // Per byte in a LOG* operation's data. CallStipend uint64 = 2300 // Free gas given at beginning of call. Keccak256Gas uint64 = 30 // Once per KECCAK256 operation. Keccak256WordGas uint64 = 6 // Once per word of the KECCAK256 operation's data. InitCodeWordGas uint64 = 2 // Once per word of the init code when creating a contract. SstoreSetGas uint64 = 20000 // Once per SSTORE operation. SstoreResetGas uint64 = 5000 // Once per SSTORE operation if the zeroness changes from zero. SstoreClearGas uint64 = 5000 // Once per SSTORE operation if the zeroness doesn't change. SstoreRefundGas uint64 = 15000 // Once per SSTORE operation if the zeroness changes to zero. NetSstoreNoopGas uint64 = 200 // Once per SSTORE operation if the value doesn't change. NetSstoreInitGas uint64 = 20000 // Once per SSTORE operation from clean zero. NetSstoreCleanGas uint64 = 5000 // Once per SSTORE operation from clean non-zero. NetSstoreDirtyGas uint64 = 200 // Once per SSTORE operation from dirty. NetSstoreClearRefund uint64 = 15000 // Once per SSTORE operation for clearing an originally existing storage slot NetSstoreResetRefund uint64 = 4800 // Once per SSTORE operation for resetting to the original non-zero value NetSstoreResetClearRefund uint64 = 19800 // Once per SSTORE operation for resetting to the original zero value SstoreSentryGasEIP2200 uint64 = 2300 // Minimum gas required to be present for an SSTORE call, not consumed SstoreSetGasEIP2200 uint64 = 20000 // Once per SSTORE operation from clean zero to non-zero SstoreResetGasEIP2200 uint64 = 5000 // Once per SSTORE operation from clean non-zero to something else SstoreClearsScheduleRefundEIP2200 uint64 = 15000 // Once per SSTORE operation for clearing an originally existing storage slot ColdAccountAccessCostEIP2929 = uint64(2600) // COLD_ACCOUNT_ACCESS_COST ColdSloadCostEIP2929 = uint64(2100) // COLD_SLOAD_COST WarmStorageReadCostEIP2929 = uint64(100) // WARM_STORAGE_READ_COST // In EIP-2200: SstoreResetGas was 5000. // In EIP-2929: SstoreResetGas was changed to '5000 - COLD_SLOAD_COST'. // In EIP-3529: SSTORE_CLEARS_SCHEDULE is defined as SSTORE_RESET_GAS + ACCESS_LIST_STORAGE_KEY_COST // Which becomes: 5000 - 2100 + 1900 = 4800 SstoreClearsScheduleRefundEIP3529 uint64 = SstoreResetGasEIP2200 - ColdSloadCostEIP2929 + TxAccessListStorageKeyGas JumpdestGas uint64 = 1 // Once per JUMPDEST operation. EpochDuration uint64 = 30000 // Duration between proof-of-work epochs. CreateDataGas uint64 = 200 // CallCreateDepth uint64 = 1024 // Maximum depth of call/create stack. ExpGas uint64 = 10 // Once per EXP instruction LogGas uint64 = 375 // Per LOG* operation. CopyGas uint64 = 3 // StackLimit uint64 = 1024 // Maximum size of VM stack allowed. TierStepGas uint64 = 0 // Once per operation, for a selection of them. LogTopicGas uint64 = 375 // Multiplied by the * of the LOG*, per LOG transaction. e.g. LOG0 incurs 0 * c_txLogTopicGas, LOG4 incurs 4 * c_txLogTopicGas. CreateGas uint64 = 32000 // Once per CREATE operation & contract-creation transaction. Create2Gas uint64 = 32000 // Once per CREATE2 operation SelfdestructRefundGas uint64 = 24000 // Refunded following a selfdestruct operation. MemoryGas uint64 = 3 // Times the address of the (highest referenced byte in memory + 1). NOTE: referencing happens on read, write and in instructions such as RETURN and CALL. TxDataNonZeroGasFrontier uint64 = 68 // Per byte of data attached to a transaction that is not equal to zero. NOTE: Not payable on data of calls between transactions. TxDataNonZeroGasEIP2028 uint64 = 16 // Per byte of non zero data attached to a transaction after EIP 2028 (part in Istanbul) TxAccessListAddressGas uint64 = 2400 // Per address specified in EIP 2930 access list TxAccessListStorageKeyGas uint64 = 1900 // Per storage key specified in EIP 2930 access list // These have been changed during the course of the chain CallGasFrontier uint64 = 40 // Once per CALL operation & message call transaction. CallGasEIP150 uint64 = 700 // Static portion of gas for CALL-derivates after EIP 150 (Tangerine) BalanceGasFrontier uint64 = 20 // The cost of a BALANCE operation BalanceGasEIP150 uint64 = 400 // The cost of a BALANCE operation after Tangerine BalanceGasEIP1884 uint64 = 700 // The cost of a BALANCE operation after EIP 1884 (part of Istanbul) ExtcodeSizeGasFrontier uint64 = 20 // Cost of EXTCODESIZE before EIP 150 (Tangerine) ExtcodeSizeGasEIP150 uint64 = 700 // Cost of EXTCODESIZE after EIP 150 (Tangerine) SloadGasFrontier uint64 = 50 SloadGasEIP150 uint64 = 200 SloadGasEIP1884 uint64 = 800 // Cost of SLOAD after EIP 1884 (part of Istanbul) SloadGasEIP2200 uint64 = SloadGasEIP1884 // Cost of SLOAD after EIP 2200 (part of Istanbul). ExtcodeHashGasConstantinople uint64 = 400 // Cost of EXTCODEHASH (introduced in Constantinople) ExtcodeHashGasEIP1884 uint64 = 700 // Cost of EXTCODEHASH after EIP 1884 (part in Istanbul) SelfdestructGasEIP150 uint64 = 5000 // Cost of SELFDESTRUCT post EIP 150 (Tangerine) // EXP has a dynamic portion depending on the size of the exponent ExpByteFrontier uint64 = 10 // was set to 10 in Frontier ExpByteEIP158 uint64 = 50 // was raised to 50 during Eip158 (Spurious Dragon) // Extcodecopy has a dynamic AND a static cost. This represents only the // static portion of the gas. It was changed during EIP 150 (Tangerine) ExtcodeCopyBaseFrontier uint64 = 20 ExtcodeCopyBaseEIP150 uint64 = 700 // CreateBySelfdestructGas is used when the refunded account is one that does // not exist. This logic is similar to call. // Introduced in Tangerine Whistle (Eip 150) CreateBySelfdestructGas uint64 = 25000 DefaultBaseFeeChangeDenominator = 8 // Bounds the amount the base fee can change between blocks. DefaultElasticityMultiplier = 2 // Bounds the maximum gas limit an EIP-1559 block may have. InitialBaseFee = 1000000000 // Initial base fee for EIP-1559 blocks. EcrecoverGas uint64 = 3000 // Elliptic curve sender recovery gas price Sha256BaseGas uint64 = 60 // Base price for a SHA256 operation Sha256PerWordGas uint64 = 12 // Per-word price for a SHA256 operation Ripemd160BaseGas uint64 = 600 // Base price for a RIPEMD160 operation Ripemd160PerWordGas uint64 = 120 // Per-word price for a RIPEMD160 operation IdentityBaseGas uint64 = 15 // Base price for a data copy operation IdentityPerWordGas uint64 = 3 // Per-work price for a data copy operation Bn256AddGasByzantium uint64 = 500 // Byzantium gas needed for an elliptic curve addition Bn256AddGasIstanbul uint64 = 150 // Gas needed for an elliptic curve addition Bn256ScalarMulGasByzantium uint64 = 40000 // Byzantium gas needed for an elliptic curve scalar multiplication Bn256ScalarMulGasIstanbul uint64 = 6000 // Gas needed for an elliptic curve scalar multiplication Bn256PairingBaseGasByzantium uint64 = 100000 // Byzantium base price for an elliptic curve pairing check Bn256PairingBaseGasIstanbul uint64 = 45000 // Base price for an elliptic curve pairing check Bn256PairingPerPointGasByzantium uint64 = 80000 // Byzantium per-point price for an elliptic curve pairing check Bn256PairingPerPointGasIstanbul uint64 = 34000 // Per-point price for an elliptic curve pairing check Bls12381G1AddGas uint64 = 600 // Price for BLS12-381 elliptic curve G1 point addition Bls12381G1MulGas uint64 = 12000 // Price for BLS12-381 elliptic curve G1 point scalar multiplication Bls12381G2AddGas uint64 = 4500 // Price for BLS12-381 elliptic curve G2 point addition Bls12381G2MulGas uint64 = 55000 // Price for BLS12-381 elliptic curve G2 point scalar multiplication Bls12381PairingBaseGas uint64 = 115000 // Base gas price for BLS12-381 elliptic curve pairing check Bls12381PairingPerPairGas uint64 = 23000 // Per-point pair gas price for BLS12-381 elliptic curve pairing check Bls12381MapG1Gas uint64 = 5500 // Gas price for BLS12-381 mapping field element to G1 operation Bls12381MapG2Gas uint64 = 110000 // Gas price for BLS12-381 mapping field element to G2 operation // The Refund Quotient is the cap on how much of the used gas can be refunded. Before EIP-3529, // up to half the consumed gas could be refunded. Redefined as 1/5th in EIP-3529 RefundQuotient uint64 = 2 RefundQuotientEIP3529 uint64 = 5 BlobTxBytesPerFieldElement = 32 // Size in bytes of a field element BlobTxFieldElementsPerBlob = 4096 // Number of field elements stored in a single data blob BlobTxHashVersion = 0x01 // Version byte of the commitment hash BlobTxMaxBlobGasPerBlock = 1 << 19 // Maximum consumable blob gas for data blobs per block BlobTxTargetBlobGasPerBlock = 1 << 18 // Target consumable blob gas for data blobs per block (for 1559-like pricing) BlobTxBlobGasPerBlob = 1 << 17 // Gas consumption of a single data blob (== blob byte size) BlobTxMinBlobGasprice = 1 // Minimum gas price for data blobs BlobTxBlobGaspriceUpdateFraction = 2225652 // Controls the maximum rate of change for blob gas price BlobTxPointEvaluationPrecompileGas = 50000 // Gas price for the point evaluation precompile. )
const Lyra2ContractNonceOffset uint64 = 0x00ffffff
Variables ¶
var ( FrontierBlockReward = big.NewInt(5e+18) // Block reward in wei for successfully mining a block EIP649FBlockReward = big.NewInt(3e+18) // Block reward in wei for successfully mining a block upward from Byzantium EIP1234FBlockReward = big.NewInt(2e+18) // Block reward in wei for successfully mining a block upward from Constantinople // Values represent TOTAL delays, per specs // https://github.com/ethereum/EIPs/blob/master/EIPS/eip-649.md EIP649DifficultyBombDelay = big.NewInt(3000000) // https://github.com/ethereum/EIPs/blob/master/EIPS/eip-1234.md EIP1234DifficultyBombDelay = big.NewInt(5000000) EIP2384DifficultyBombDelay = big.NewInt(9000000) // https://github.com/ethereum/EIPs/blob/master/EIPS/eip-3554.md EIP3554DifficultyBombDelay = big.NewInt(9700000) // https://github.com/ethereum/EIPs/blob/master/EIPS/eip-4345.md EIP4345DifficultyBombDelay = big.NewInt(10700000) // https://github.com/ethereum/EIPs/blob/master/EIPS/eip-5133.md EIP5133DifficultyBombDelay = big.NewInt(11_400_000) )
var ( // SupportedProtocolVersions are the supported versions of the `eth` protocol (first // is primary). SupportedProtocolVersions = []uint{68, 67, 66} // DefaultProtocolVersions are the protocol version defaults. DefaultProtocolVersions = SupportedProtocolVersions )
var ( GasLimitBoundDivisor uint64 = 1024 // The bound divisor of the gas limit, used in update calculations. MinGasLimit uint64 = 5000 // Minimum the gas limit may ever be. MaximumExtraDataSize uint64 = 32 // Maximum size extra data may be after Genesis. MaxCodeSize uint64 = 24576 // Maximum bytecode to permit for a contract MaxInitCodeSize = 2 * MaxCodeSize // Maximum initcode to permit in a creation transaction and create instructions )
var ( DifficultyBoundDivisor = big.NewInt(2048) // The bound divisor of the difficulty, used in the update calculations. GenesisDifficulty = big.NewInt(131072) // Difficulty of the Genesis block. MinimumDifficulty = big.NewInt(131072) // The minimum that the difficulty may ever be. DurationLimit = big.NewInt(13) // The decision boundary on the blocktime duration used to determine whether difficulty should go up or not. EIP2DifficultyIncrementDivisor = big.NewInt(10) // Is related to the equilibrium block intervals for the Homestead era difficulty evolution, redefines the value in (YP:43), originally 10 = 0xa EIP100FDifficultyIncrementDivisor = big.NewInt(9) )
var Bls12381MultiExpDiscountTable = [128]uint64{} /* 128 elements not displayed */
Gas discount table for BLS12-381 G1 and G2 multi exponentiation operations
var DAOForkBlockExtra = common.FromHex("0x64616f2d686172642d666f726b")
DAOForkBlockExtra is the block header extra-data field to set for the DAO fork point and a number of consecutive blocks to allow fast/light syncers to correctly pick the side they want ("dao-hard-fork").
var DAOForkExtraRange = big.NewInt(10)
DAOForkExtraRange is the number of consecutive blocks from the DAO fork point to override the extra-data in to prevent no-fork attacks.
var DAORefundContract = common.HexToAddress("0xbf4ed7b27f1d666546e30d74d50d173d20bca754")
DAORefundContract is the address of the refund contract to send DAO balances to.
var (
DefaultNetworkID uint64 = 1
)
Functions ¶
func DAODrainList ¶
DAODrainList is the list of accounts whose full balances will be moved into a refund contract at the beginning of the dao-fork block.
func DefaultDataDir ¶
func DefaultDataDir() string
DefaultDataDir is the default data directory to use for the databases and other persistence requirements.
Types ¶
This section is empty.