Documentation
¶
Overview ¶
add sm2 support
Index ¶
- Constants
- func Listen(network, laddr string, config *Config) (net.Listener, error)
- func NewAuthHTTPSClient(pool *x509.CertPool, clientAuthCert *Certificate) *http.Client
- func NewCustomHTTPSClient(config *Config) *http.Client
- func NewHTTPSClient(pool *x509.CertPool) *http.Client
- func NewHTTPSClientSkipVerify() *http.Client
- func NewListener(inner net.Listener, config *Config) net.Listener
- type Certificate
- func GMX509KeyPairs(certPEMBlock, keyPEMBlock, encCertPEMBlock, encKeyPEMBlock []byte) (Certificate, error)
- func GMX509KeyPairsSingle(certPEMBlock, keyPEMBlock []byte) (Certificate, error)
- func LoadGMX509KeyPair(certFile, keyFile string) (Certificate, error)
- func LoadGMX509KeyPairs(certFile, keyFile, encCertFile, encKeyFile string) (Certificate, error)
- func LoadX509KeyPair(certFile, keyFile string) (Certificate, error)
- func X509KeyPair(certPEMBlock, keyPEMBlock []byte) (Certificate, error)
- type CertificateRequestInfo
- type ClientAuthType
- type ClientHelloInfo
- type ClientSessionCache
- type ClientSessionState
- type Config
- type Conn
- func (c *Conn) Close() error
- func (c *Conn) CloseWrite() error
- func (c *Conn) ConnectionState() ConnectionState
- func (c *Conn) Handshake() error
- func (c *Conn) HandshakeContext(ctx context.Context) error
- func (c *Conn) LocalAddr() net.Addr
- func (c *Conn) OCSPResponse() []byte
- func (c *Conn) Read(b []byte) (n int, err error)
- func (c *Conn) RemoteAddr() net.Addr
- func (c *Conn) SetDeadline(t time.Time) error
- func (c *Conn) SetReadDeadline(t time.Time) error
- func (c *Conn) SetWriteDeadline(t time.Time) error
- func (c *Conn) VerifyHostname(host string) error
- func (c *Conn) Write(b []byte) (int, error)
- type ConnectionState
- type CurveID
- type GMSupport
- type RecordHeaderError
- type RenegotiationSupport
- type SignatureScheme
- type SimpleRoundTripper
Constants ¶
const ( TLS_RSA_WITH_RC4_128_SHA uint16 = 0x0005 TLS_RSA_WITH_3DES_EDE_CBC_SHA uint16 = 0x000a TLS_RSA_WITH_AES_128_CBC_SHA uint16 = 0x002f TLS_RSA_WITH_AES_256_CBC_SHA uint16 = 0x0035 TLS_RSA_WITH_AES_128_CBC_SHA256 uint16 = 0x003c TLS_RSA_WITH_AES_128_GCM_SHA256 uint16 = 0x009c TLS_RSA_WITH_AES_256_GCM_SHA384 uint16 = 0x009d TLS_ECDHE_ECDSA_WITH_RC4_128_SHA uint16 = 0xc007 TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA uint16 = 0xc009 TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA uint16 = 0xc00a TLS_ECDHE_RSA_WITH_RC4_128_SHA uint16 = 0xc011 TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA uint16 = 0xc012 TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA uint16 = 0xc013 TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA uint16 = 0xc014 TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256 uint16 = 0xc023 TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256 uint16 = 0xc027 TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256 uint16 = 0xc02f TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256 uint16 = 0xc02b TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 uint16 = 0xc030 TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384 uint16 = 0xc02c TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 uint16 = 0xcca8 TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305 uint16 = 0xcca9 // TLS_FALLBACK_SCSV isn't a standard cipher suite but an indicator // that the client is doing version fallback. See // https://tools.ietf.org/html/rfc7507. TLS_FALLBACK_SCSV uint16 = 0x5600 )
A list of cipher suite IDs that are, or have been, implemented by this package.
Taken from https://www.iana.org/assignments/tls-parameters/tls-parameters.xml
const ( VersionSSL30 = 0x0300 VersionTLS10 = 0x0301 VersionTLS11 = 0x0302 VersionTLS12 = 0x0303 )
const ( //GM crypto suites ID Taken from GM/T 0024-2014 GMTLS_ECDHE_SM2_WITH_SM1_SM3 uint16 = 0xe001 GMTLS_SM2_WITH_SM1_SM3 uint16 = 0xe003 GMTLS_IBSDH_WITH_SM1_SM3 uint16 = 0xe005 GMTLS_IBC_WITH_SM1_SM3 uint16 = 0xe007 GMTLS_RSA_WITH_SM1_SM3 uint16 = 0xe009 GMTLS_RSA_WITH_SM1_SHA1 uint16 = 0xe00a GMTLS_ECDHE_SM2_WITH_SM4_SM3 uint16 = 0xe011 GMTLS_ECDHE_SM4_CBC_SM3 uint16 = 0xe011 GMTLS_ECDHE_SM4_GCM_SM3 uint16 = 0xe051 GMTLS_SM2_WITH_SM4_SM3 uint16 = 0xe013 GMTLS_ECC_SM4_CBC_SM3 uint16 = 0xe013 GMTLS_ECC_SM4_GCM_SM3 uint16 = 0xe053 GMTLS_IBSDH_WITH_SM4_SM3 uint16 = 0xe015 GMTLS_IBC_WITH_SM4_SM3 uint16 = 0xe017 GMTLS_RSA_WITH_SM4_SM3 uint16 = 0xe019 GMTLS_RSA_WITH_SM4_SHA1 uint16 = 0xe01a )
A list of cipher suite IDs that are, or have been, implemented by this package.
const ( ModeGMSSLOnly = "GMSSLOnly" // 仅支持 国密SSL模式 ModeAutoSwitch = "AutoSwitch" // GMSSL/TLS 自动切换模式 )
const VersionGMSSL = 0x0101 // GM/T 0024-2014
Variables ¶
This section is empty.
Functions ¶
func Listen ¶
Listen creates a TLS listener accepting connections on the given network address using net.Listen. The configuration config must be non-nil and must include at least one certificate or else set GetCertificate.
func NewAuthHTTPSClient ¶
func NewAuthHTTPSClient(pool *x509.CertPool, clientAuthCert *Certificate) *http.Client
NewAuthHTTPSClient 创建双向身份认证国密HTTPS客户端
pool: 根证书链 clientAuthCert: 客户端认证密钥对和证书
func NewCustomHTTPSClient ¶
NewCustomHTTPSClient 创建自定义国密HTTPS客户端 通过自定义TLS参数定制TLS实现细节,如进行双向身份认证等。
func NewHTTPSClient ¶
NewHTTPSClient 创建国密HTTPS客户端,只对服务端进行身份认证(验证服务端证书)。 pool: 根证书链
func NewHTTPSClientSkipVerify ¶
NewHTTPSClientSkipVerify 创建国密HTTPS客户端,不对服务端进行身份认证(验证服务端证书)。 pool: 根证书链
func NewListener ¶
NewListener creates a Listener which accepts connections from an inner Listener and wraps each connection with Server. The configuration config must be non-nil and must include at least one certificate or else set GetCertificate.
Types ¶
type Certificate ¶
type Certificate struct { Certificate [][]byte // PrivateKey contains the private key corresponding to the public key // in Leaf. For a server, this must implement crypto.Signer and/or // crypto.Decrypter, with an RSA or ECDSA PublicKey. For a client // (performing client authentication), this must be a crypto.Signer // with an RSA or ECDSA PublicKey. PrivateKey crypto.PrivateKey // OCSPStaple contains an optional OCSP response which will be served // to clients that request it. OCSPStaple []byte // SignedCertificateTimestamps contains an optional list of Signed // Certificate Timestamps which will be served to clients that request it. SignedCertificateTimestamps [][]byte // Leaf is the parsed form of the leaf certificate, which may be // initialized using x509.ParseCertificate to reduce per-handshake // processing for TLS clients doing client authentication. If nil, the // leaf certificate will be parsed as needed. Leaf *x509.Certificate }
A Certificate is a chain of one or more certificates, leaf first.
func GMX509KeyPairs ¶
func GMX509KeyPairs(certPEMBlock, keyPEMBlock, encCertPEMBlock, encKeyPEMBlock []byte) (Certificate, error)
X509KeyPair parses a public/private key pair from a pair of PEM encoded data. On successful return, Certificate.Leaf will be nil because the parsed form of the certificate is not retained.
func GMX509KeyPairsSingle ¶
func GMX509KeyPairsSingle(certPEMBlock, keyPEMBlock []byte) (Certificate, error)
one cert for enc and sign
func LoadGMX509KeyPair ¶
func LoadGMX509KeyPair(certFile, keyFile string) (Certificate, error)
add by syl add sigle key pair sitiation
func LoadGMX509KeyPairs ¶
func LoadGMX509KeyPairs(certFile, keyFile, encCertFile, encKeyFile string) (Certificate, error)
LoadGMX509KeyPairs reads and parses two public/private key pairs from pairs of files. The files must contain PEM encoded data. The certificate file may contain intermediate certificates following the leaf certificate to form a certificate chain. On successful return, Certificate.Leaf will be nil because the parsed form of the certificate is not retained.
func LoadX509KeyPair ¶
func LoadX509KeyPair(certFile, keyFile string) (Certificate, error)
LoadX509KeyPair reads and parses a public/private key pair from a pair of files. The files must contain PEM encoded data. The certificate file may contain intermediate certificates following the leaf certificate to form a certificate chain. On successful return, Certificate.Leaf will be nil because the parsed form of the certificate is not retained.
func X509KeyPair ¶
func X509KeyPair(certPEMBlock, keyPEMBlock []byte) (Certificate, error)
X509KeyPair parses a public/private key pair from a pair of PEM encoded data. On successful return, Certificate.Leaf will be nil because the parsed form of the certificate is not retained.
type CertificateRequestInfo ¶
type CertificateRequestInfo struct { // AcceptableCAs contains zero or more, DER-encoded, X.501 // Distinguished Names. These are the names of root or intermediate CAs // that the server wishes the returned certificate to be signed by. An // empty slice indicates that the server has no preference. AcceptableCAs [][]byte // SignatureSchemes lists the signature schemes that the server is // willing to verify. SignatureSchemes []SignatureScheme }
CertificateRequestInfo contains information from a server's CertificateRequest message, which is used to demand a certificate and proof of control from a client.
type ClientAuthType ¶
type ClientAuthType int
ClientAuthType declares the policy the server will follow for TLS Client Authentication.
const ( NoClientCert ClientAuthType = iota RequestClientCert RequireAnyClientCert VerifyClientCertIfGiven RequireAndVerifyClientCert )
type ClientHelloInfo ¶
type ClientHelloInfo struct { // CipherSuites lists the CipherSuites supported by the client (e.g. // TLS_RSA_WITH_RC4_128_SHA). CipherSuites []uint16 // ServerName indicates the name of the server requested by the client // in order to support virtual hosting. ServerName is only set if the // client is using SNI (see // https://tools.ietf.org/html/rfc4366#section-3.1). ServerName string // SupportedCurves lists the elliptic curves supported by the client. // SupportedCurves is set only if the Supported Elliptic Curves // Extension is being used (see // https://tools.ietf.org/html/rfc4492#section-5.1.1). SupportedCurves []CurveID // SupportedPoints lists the point formats supported by the client. // SupportedPoints is set only if the Supported Point Formats Extension // is being used (see // https://tools.ietf.org/html/rfc4492#section-5.1.2). SupportedPoints []uint8 // SignatureSchemes lists the signature and hash schemes that the client // is willing to verify. SignatureSchemes is set only if the Signature // Algorithms Extension is being used (see // https://tools.ietf.org/html/rfc5246#section-7.4.1.4.1). SignatureSchemes []SignatureScheme // SupportedProtos lists the application protocols supported by the client. // SupportedProtos is set only if the Application-Layer Protocol // Negotiation Extension is being used (see // https://tools.ietf.org/html/rfc7301#section-3.1). // // Servers can select a protocol by setting Config.NextProtos in a // GetConfigForClient return value. SupportedProtos []string // SupportedVersions lists the TLS versions supported by the client. // For TLS versions less than 1.3, this is extrapolated from the max // version advertised by the client, so values other than the greatest // might be rejected if used. SupportedVersions []uint16 // Conn is the underlying net.Conn for the connection. Do not read // from, or write to, this connection; that will cause the TLS // connection to fail. Conn net.Conn }
ClientHelloInfo contains information from a ClientHello message in order to guide certificate selection in the GetCertificate callback.
type ClientSessionCache ¶
type ClientSessionCache interface { // Get searches for a ClientSessionState associated with the given key. // On return, ok is true if one was found. Get(sessionKey string) (session *ClientSessionState, ok bool) // Put adds the ClientSessionState to the cache with the given key. Put(sessionKey string, cs *ClientSessionState) }
ClientSessionCache is a cache of ClientSessionState objects that can be used by a client to resume a TLS session with a given server. ClientSessionCache implementations should expect to be called concurrently from different goroutines. Only ticket-based resumption is supported, not SessionID-based resumption.
func NewLRUClientSessionCache ¶
func NewLRUClientSessionCache(capacity int) ClientSessionCache
NewLRUClientSessionCache returns a ClientSessionCache with the given capacity that uses an LRU strategy. If capacity is < 1, a default capacity is used instead.
type ClientSessionState ¶
type ClientSessionState struct {
// contains filtered or unexported fields
}
ClientSessionState contains the state needed by clients to resume TLS sessions.
type Config ¶
type Config struct { //if not nil, will support GMT0024 GMSupport *GMSupport // Rand provides the source of entropy for nonces and RSA blinding. // If Rand is nil, TLS uses the cryptographic random reader in package // crypto/rand. // The Reader must be safe for use by multiple goroutines. Rand io.Reader // Time returns the current time as the number of seconds since the epoch. // If Time is nil, TLS uses time.Now. Time func() time.Time // Certificates contains one or more certificate chains to present to // the other side of the connection. Server configurations must include // at least one certificate or else set GetCertificate. Clients doing // client-authentication may set either Certificates or // GetClientCertificate. Certificates []Certificate // NameToCertificate maps from a certificate name to an element of // Certificates. Note that a certificate name can be of the form // '*.example.com' and so doesn't have to be a domain name as such. // See Config.BuildNameToCertificate // The nil value causes the first element of Certificates to be used // for all connections. NameToCertificate map[string]*Certificate // GetCertificate returns a Certificate based on the given // ClientHelloInfo. It will only be called if the client supplies SNI // information or if Certificates is empty. // // If GetCertificate is nil or returns nil, then the certificate is // retrieved from NameToCertificate. If NameToCertificate is nil, the // first element of Certificates will be used. GetCertificate func(*ClientHelloInfo) (*Certificate, error) // GetKECertificate 获取密钥交换证书(加密证书) // 这个方法只有在使用Config中Certificates为空或长度小于2时,才会被调用。 // 如果该方法为空,则默认从证书列表中 Certificates 取出第二个位置的证书,也就是加密证书。 // 该方法只有GMSSL流程中才会调用。 GetKECertificate func(*ClientHelloInfo) (*Certificate, error) // GetClientCertificate, if not nil, is called when a server requests a // certificate from a client. If set, the contents of Certificates will // be ignored. // // If GetClientCertificate returns an error, the handshake will be // aborted and that error will be returned. Otherwise // GetClientCertificate must return a non-nil Certificate. If // Certificate.Certificate is empty then no certificate will be sent to // the server. If this is unacceptable to the server then it may abort // the handshake. // // GetClientCertificate may be called multiple times for the same // connection if renegotiation occurs or if TLS 1.3 is in use. GetClientCertificate func(*CertificateRequestInfo) (*Certificate, error) // GetConfigForClient, if not nil, is called after a ClientHello is // received from a client. It may return a non-nil Config in order to // change the Config that will be used to handle this connection. If // the returned Config is nil, the original Config will be used. The // Config returned by this callback may not be subsequently modified. // // If GetConfigForClient is nil, the Config passed to Server() will be // used for all connections. // // Uniquely for the fields in the returned Config, session ticket keys // will be duplicated from the original Config if not set. // Specifically, if SetSessionTicketKeys was called on the original // config but not on the returned config then the ticket keys from the // original config will be copied into the new config before use. // Otherwise, if SessionTicketKey was set in the original config but // not in the returned config then it will be copied into the returned // config before use. If neither of those cases applies then the key // material from the returned config will be used for session tickets. GetConfigForClient func(*ClientHelloInfo) (*Config, error) // VerifyPeerCertificate, if not nil, is called after normal // certificate verification by either a TLS client or server. It // receives the raw ASN.1 certificates provided by the peer and also // any verified chains that normal processing found. If it returns a // non-nil error, the handshake is aborted and that error results. // // If normal verification fails then the handshake will abort before // considering this callback. If normal verification is disabled by // setting InsecureSkipVerify, or (for a server) when ClientAuth is // RequestClientCert or RequireAnyClientCert, then this callback will // be considered but the verifiedChains argument will always be nil. VerifyPeerCertificate func(rawCerts [][]byte, verifiedChains [][]*x509.Certificate) error // RootCAs defines the set of root certificate authorities // that clients use when verifying server certificates. // If RootCAs is nil, TLS uses the host's root CA set. RootCAs *x509.CertPool // NextProtos is a list of supported, application level protocols. NextProtos []string // ServerName is used to verify the hostname on the returned // certificates unless InsecureSkipVerify is given. It is also included // in the client's handshake to support virtual hosting unless it is // an IP address. ServerName string // ClientAuth determines the server's policy for // TLS Client Authentication. The default is NoClientCert. ClientAuth ClientAuthType // ClientCAs defines the set of root certificate authorities // that servers use if required to verify a client certificate // by the policy in ClientAuth. ClientCAs *x509.CertPool // InsecureSkipVerify controls whether a client verifies the // server's certificate chain and host name. // If InsecureSkipVerify is true, TLS accepts any certificate // presented by the server and any host name in that certificate. // In this mode, TLS is susceptible to man-in-the-middle attacks. // This should be used only for testing. InsecureSkipVerify bool // CipherSuites is a list of supported cipher suites. If CipherSuites // is nil, TLS uses a list of suites supported by the implementation. CipherSuites []uint16 // PreferServerCipherSuites controls whether the server selects the // client's most preferred ciphersuite, or the server's most preferred // ciphersuite. If true then the server's preference, as expressed in // the order of elements in CipherSuites, is used. PreferServerCipherSuites bool // SessionTicketsDisabled may be set to true to disable session ticket // (resumption) support. Note that on clients, session ticket support is // also disabled if ClientSessionCache is nil. SessionTicketsDisabled bool // SessionTicketKey is used by TLS servers to provide session // resumption. See RFC 5077. If zero, it will be filled with // random data before the first server handshake. // // If multiple servers are terminating connections for the same host // they should all have the same SessionTicketKey. If the // SessionTicketKey leaks, previously recorded and future TLS // connections using that key are compromised. SessionTicketKey [32]byte // ClientSessionCache is a cache of ClientSessionState entries for TLS // session resumption. It is only used by clients. ClientSessionCache ClientSessionCache // MinVersion contains the minimum SSL/TLS version that is acceptable. // If zero, then TLS 1.0 is taken as the minimum. MinVersion uint16 // MaxVersion contains the maximum SSL/TLS version that is acceptable. // If zero, then the maximum version supported by this package is used, // which is currently TLS 1.2. MaxVersion uint16 // CurvePreferences contains the elliptic curves that will be used in // an ECDHE handshake, in preference order. If empty, the default will // be used. CurvePreferences []CurveID // DynamicRecordSizingDisabled disables adaptive sizing of TLS records. // When true, the largest possible TLS record size is always used. When // false, the size of TLS records may be adjusted in an attempt to // improve latency. DynamicRecordSizingDisabled bool // Renegotiation controls what types of renegotiation are supported. // The default, none, is correct for the vast majority of applications. Renegotiation RenegotiationSupport // KeyLogWriter optionally specifies a destination for TLS master secrets // in NSS key log format that can be used to allow external programs // such as Wireshark to decrypt TLS connections. // See https://developer.mozilla.org/en-US/docs/Mozilla/Projects/NSS/Key_Log_Format. // Use of KeyLogWriter compromises security and should only be // used for debugging. KeyLogWriter io.Writer // contains filtered or unexported fields }
A Config structure is used to configure a TLS client or server. After one has been passed to a TLS function it must not be modified. A Config may be reused; the tls package will also not modify it.
func NewBasicAutoSwitchConfig ¶
func NewBasicAutoSwitchConfig(sm2SigCert, sm2EncCert, stdCert *Certificate) (*Config, error)
NewBasicAutoSwitchConfig 返回一个实现了GMSSL/TLS自动切换的配置
sm2SigCert: SM2 签名密钥对、证书 sm2EncCert: SM2 加密密钥对、证书 stdCert: RSA/ECC 标准的密钥对、证书
return: 最基础的Config对象
func NewDefaultGMTLSConfig ¶
func NewDefaultGMTLSConfig() *Config
func (*Config) BuildNameToCertificate ¶
func (c *Config) BuildNameToCertificate()
BuildNameToCertificate parses c.Certificates and builds c.NameToCertificate from the CommonName and SubjectAlternateName fields of each of the leaf certificates.
func (*Config) Clone ¶
Clone returns a shallow clone of c. It is safe to clone a Config that is being used concurrently by a TLS client or server.
func (*Config) SetSessionTicketKeys ¶
SetSessionTicketKeys updates the session ticket keys for a server. The first key will be used when creating new tickets, while all keys can be used for decrypting tickets. It is safe to call this function while the server is running in order to rotate the session ticket keys. The function will panic if keys is empty.
type Conn ¶
type Conn struct {
// contains filtered or unexported fields
}
A Conn represents a secured connection. It implements the net.Conn interface.
func Client ¶
Client returns a new TLS client side connection using conn as the underlying transport. The config cannot be nil: users must set either ServerName or InsecureSkipVerify in the config.
func Dial ¶
Dial connects to the given network address using net.Dial and then initiates a TLS handshake, returning the resulting TLS connection. Dial interprets a nil configuration as equivalent to the zero configuration; see the documentation of Config for the defaults.
func DialWithDialer ¶
DialWithDialer connects to the given network address using dialer.Dial and then initiates a TLS handshake, returning the resulting TLS connection. Any timeout or deadline given in the dialer apply to connection and TLS handshake as a whole.
DialWithDialer interprets a nil configuration as equivalent to the zero configuration; see the documentation of Config for the defaults.
func Server ¶
Server returns a new TLS server side connection using conn as the underlying transport. The configuration config must be non-nil and must include at least one certificate or else set GetCertificate.
func (*Conn) CloseWrite ¶
CloseWrite shuts down the writing side of the connection. It should only be called once the handshake has completed and does not call CloseWrite on the underlying connection. Most callers should just use Close.
func (*Conn) ConnectionState ¶
func (c *Conn) ConnectionState() ConnectionState
ConnectionState returns basic TLS details about the connection.
func (*Conn) Handshake ¶
Handshake runs the client or server handshake protocol if it has not yet been run. Most uses of this package need not call Handshake explicitly: the first Read or Write will call it automatically.
func (*Conn) HandshakeContext ¶
HandshakeContext runs the client or server handshake protocol if it has not yet been run.
The provided Context must be non-nil. If the context is canceled before the handshake is complete, the handshake is interrupted and an error is returned. Once the handshake has completed, cancellation of the context will not affect the connection.
Most uses of this package need not call HandshakeContext explicitly: the first Read or Write will call it automatically.
func (*Conn) OCSPResponse ¶
OCSPResponse returns the stapled OCSP response from the TLS server, if any. (Only valid for client connections.)
func (*Conn) Read ¶
Read can be made to time out and return a net.Error with Timeout() == true after a fixed time limit; see SetDeadline and SetReadDeadline.
func (*Conn) RemoteAddr ¶
RemoteAddr returns the remote network address.
func (*Conn) SetDeadline ¶
SetDeadline sets the read and write deadlines associated with the connection. A zero value for t means Read and Write will not time out. After a Write has timed out, the TLS state is corrupt and all future writes will return the same error.
func (*Conn) SetReadDeadline ¶
SetReadDeadline sets the read deadline on the underlying connection. A zero value for t means Read will not time out.
func (*Conn) SetWriteDeadline ¶
SetWriteDeadline sets the write deadline on the underlying connection. A zero value for t means Write will not time out. After a Write has timed out, the TLS state is corrupt and all future writes will return the same error.
func (*Conn) VerifyHostname ¶
VerifyHostname checks that the peer certificate chain is valid for connecting to host. If so, it returns nil; if not, it returns an error describing the problem.
type ConnectionState ¶
type ConnectionState struct { Version uint16 // TLS version used by the connection (e.g. VersionTLS12) HandshakeComplete bool // TLS handshake is complete DidResume bool // connection resumes a previous TLS connection CipherSuite uint16 // cipher suite in use (TLS_RSA_WITH_RC4_128_SHA, ...) NegotiatedProtocol string // negotiated next protocol (not guaranteed to be from Config.NextProtos) NegotiatedProtocolIsMutual bool // negotiated protocol was advertised by server (client side only) ServerName string // server name requested by client, if any (server side only) PeerCertificates []*x509.Certificate // certificate chain presented by remote peer VerifiedChains [][]*x509.Certificate // verified chains built from PeerCertificates SignedCertificateTimestamps [][]byte // SCTs from the server, if any OCSPResponse []byte // stapled OCSP response from server, if any // TLSUnique contains the "tls-unique" channel binding value (see RFC // 5929, section 3). For resumed sessions this value will be nil // because resumption does not include enough context (see // https://mitls.org/pages/attacks/3SHAKE#channelbindings). This will // change in future versions of Go once the TLS master-secret fix has // been standardized and implemented. TLSUnique []byte // contains filtered or unexported fields }
ConnectionState records basic TLS details about the connection.
func (*ConnectionState) ExportKeyingMaterial ¶
func (cs *ConnectionState) ExportKeyingMaterial(label string, context []byte, length int) ([]byte, error)
ExportKeyingMaterial returns length bytes of exported key material in a new slice as defined in https://tools.ietf.org/html/rfc5705. If context is nil, it is not used as part of the seed. If the connection was set to allow renegotiation via Config.Renegotiation, this function will return an error.
type CurveID ¶
type CurveID uint16
CurveID is the type of a TLS identifier for an elliptic curve. See https://www.iana.org/assignments/tls-parameters/tls-parameters.xml#tls-parameters-8
type GMSupport ¶
type GMSupport struct {
WorkMode string // 工作模式
}
func NewGMSupport ¶
func NewGMSupport() *GMSupport
func (*GMSupport) EnableMixMode ¶
func (support *GMSupport) EnableMixMode()
EnableMixMode 启用 GMSSL/TLS 自动切换的工作模式
func (*GMSupport) GetVersion ¶
func (*GMSupport) IsAutoSwitchMode ¶
IsAutoSwitchMode 是否处于混合工作模式 return true - GMSSL/TLS 均支持, false - 不处于混合模式
func (*GMSupport) IsAvailable ¶
type RecordHeaderError ¶
type RecordHeaderError struct { // Msg contains a human readable string that describes the error. Msg string // RecordHeader contains the five bytes of TLS record header that // triggered the error. RecordHeader [5]byte }
RecordHeaderError results when a TLS record header is invalid.
func (RecordHeaderError) Error ¶
func (e RecordHeaderError) Error() string
type RenegotiationSupport ¶
type RenegotiationSupport int
RenegotiationSupport enumerates the different levels of support for TLS renegotiation. TLS renegotiation is the act of performing subsequent handshakes on a connection after the first. This significantly complicates the state machine and has been the source of numerous, subtle security issues. Initiating a renegotiation is not supported, but support for accepting renegotiation requests may be enabled.
Even when enabled, the server may not change its identity between handshakes (i.e. the leaf certificate must be the same). Additionally, concurrent handshake and application data flow is not permitted so renegotiation can only be used with protocols that synchronise with the renegotiation, such as HTTPS.
const ( // RenegotiateNever disables renegotiation. RenegotiateNever RenegotiationSupport = iota // RenegotiateOnceAsClient allows a remote server to request // renegotiation once per connection. RenegotiateOnceAsClient // RenegotiateFreelyAsClient allows a remote server to repeatedly // request renegotiation. RenegotiateFreelyAsClient )
type SignatureScheme ¶
type SignatureScheme uint16
SignatureScheme identifies a signature algorithm supported by TLS. See https://tools.ietf.org/html/draft-ietf-tls-tls13-18#section-4.2.3.
const ( PKCS1WithSHA1 SignatureScheme = 0x0201 PKCS1WithSHA256 SignatureScheme = 0x0401 PKCS1WithSHA384 SignatureScheme = 0x0501 PKCS1WithSHA512 SignatureScheme = 0x0601 PSSWithSHA256 SignatureScheme = 0x0804 PSSWithSHA384 SignatureScheme = 0x0805 PSSWithSHA512 SignatureScheme = 0x0806 ECDSAWithP256AndSHA256 SignatureScheme = 0x0403 ECDSAWithP384AndSHA384 SignatureScheme = 0x0503 ECDSAWithP521AndSHA512 SignatureScheme = 0x0603 // Legacy signature and hash algorithms for TLS 1.2. ECDSAWithSHA1 SignatureScheme = 0x0203 SM2WITHSM3 SignatureScheme = 0x0204 )
type SimpleRoundTripper ¶
type SimpleRoundTripper struct { // Proxy specifies a function to return a proxy for a given // Request. If the function returns a non-nil error, the // request is aborted with the provided error. // // The proxy type is determined by the URL scheme. "http", // "https", and "socks5" are supported. If the scheme is empty, // "http" is assumed. // // If Proxy is nil or returns a nil *URL, no proxy is used. Proxy func(*http.Request) (*url.URL, error) // contains filtered or unexported fields }
SimpleRoundTripper 简单的单次HTTP/HTTPS(国密) 连接往返器 每次建立新的连接
func NewSimpleRoundTripper ¶
func NewSimpleRoundTripper(cfg *Config) *SimpleRoundTripper
Source Files
¶
- alert.go
- auth.go
- auto_handshake_server.go
- auto_switch_config.go
- cipher_suites.go
- common.go
- conn.go
- gm_handshake_client_double.go
- gm_handshake_messages.go
- gm_handshake_server_double.go
- gm_key_agreement.go
- gm_support.go
- handshake_client.go
- handshake_messages.go
- handshake_server.go
- http_client.go
- key_agreement.go
- prf.go
- simple_round_trip.go
- ticket.go
- tls.go