dynamodb

package
v1.1.57 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Apr 27, 2023 License: Unlicense Imports: 12 Imported by: 0

Documentation

Index

Constants

This section is empty.

Variables

This section is empty.

Functions

func AttributeValuesToJSON added in v1.1.33 

func AttributeValuesToJSON(attrs map[string]types.AttributeValue) ([]byte, error)

AttributeValuesToJSON attempts to convert a mapping of attribute values to a properly-formatted JSON string

Types

type DatabaseConnection 

type DatabaseConnection struct {
	// contains filtered or unexported fields
}

DatabaseConnection contains functinoality allowing for systemical access to DynamoDB

func FromClient 

func FromClient(inner DynamoDBAPI, logger *utils.Logger, opts ...IDynamoDBOption) *DatabaseConnection

FromClient creates a new DynamoDB database connection from a DynamoDB client, a logger and options

func NewDatabaseConnection 

func NewDatabaseConnection(cfg aws.Config, logger *utils.Logger, opts ...IDynamoDBOption) *DatabaseConnection

NewDatabaseConnection creates a new DynamoDB database connection from an AWS session and logger

func (*DatabaseConnection) BatchWrite 

func (conn *DatabaseConnection) BatchWrite(ctx context.Context, tableName string,
	requests ...types.WriteRequest) error

BatchWrite makes a number of write requests against a table in DynamoDB. This function does not return collection or capacity statistics.

func (*DatabaseConnection) DeleteItem 

func (conn *DatabaseConnection) DeleteItem(ctx context.Context,
	input *dynamodb.DeleteItemInput) (*dynamodb.DeleteItemOutput, error)

DeleteItem removes the item associated with the input from DynamoDB

func (*DatabaseConnection) GetItem 

func (conn *DatabaseConnection) GetItem(ctx context.Context,
	input *dynamodb.GetItemInput) (*dynamodb.GetItemOutput, error)

GetItem retrieves an item from DynamoDB

func (*DatabaseConnection) MarshalMap added in v1.1.34 

func (conn *DatabaseConnection) MarshalMap(in interface{}) (map[string]types.AttributeValue, error)

MarshalMap converts the object to a mapping of DynamoDB attribute values

func (*DatabaseConnection) NewError 

func (conn *DatabaseConnection) NewError(inner error, tableName string,
	message string, args ...interface{}) *Error

NewError creates a new Error from an inner error, table name, message and arguments

func (*DatabaseConnection) PutItem 

func (conn *DatabaseConnection) PutItem(ctx context.Context,
	input *dynamodb.PutItemInput) (*dynamodb.PutItemOutput, error)

PutItem writes an item to DynamoDB, overwriting an existing item if there is one

func (*DatabaseConnection) Query 

func (conn *DatabaseConnection) Query(ctx context.Context,
	input *dynamodb.QueryInput) ([]map[string]types.AttributeValue, error)

Query makes a search on a particular partition in a DynamoDB table and returns the results. This function does not return capacity statistics, just the queried results.

func (*DatabaseConnection) Scan added in v1.1.34 

func (conn *DatabaseConnection) Scan(ctx context.Context,
	input *dynamodb.ScanInput) ([]map[string]types.AttributeValue, error)

Scan makes a search on an entire DynamoDB table and returns the result. This function does not return capacity statistics, just the scanned results

func (*DatabaseConnection) UnmarshalList added in v1.1.34 

func (conn *DatabaseConnection) UnmarshalList(attrs []map[string]types.AttributeValue, out interface{}) error

UnmarshalList converts a list of DynamoDB attribute value mappings to a list of objects

func (*DatabaseConnection) UnmarshalMap added in v1.1.34 

func (conn *DatabaseConnection) UnmarshalMap(attrs map[string]types.AttributeValue, out interface{}) error

UnmarshalMap converts a mapping of DynamoDB attribute values to an object

func (*DatabaseConnection) UpdateItem 

func (conn *DatabaseConnection) UpdateItem(ctx context.Context,
	input *dynamodb.UpdateItemInput) (*dynamodb.UpdateItemOutput, error)

UpdateItem updates desired fields on an item in DynamoDB

type DynamoDBAPI 

type DynamoDBAPI interface {

	// This operation allows you to perform batch reads or writes on data stored in
	// DynamoDB, using PartiQL. Each read statement in a BatchExecuteStatement must
	// specify an equality condition on all key attributes. This enforces that each
	// SELECT statement in a batch returns at most a single item. The entire batch must
	// consist of either read statements or write statements, you cannot mix both in
	// one batch. A HTTP 200 response does not mean that all statements in the
	// BatchExecuteStatement succeeded. Error details for individual statements can be
	// found under the Error
	// (https://docs.aws.amazon.com/amazondynamodb/latest/APIReference/API_BatchStatementResponse.html#DDB-Type-BatchStatementResponse-Error)
	// field of the BatchStatementResponse for each statement.
	BatchExecuteStatement(ctx context.Context, params *dynamodb.BatchExecuteStatementInput,
		optFns ...func(*dynamodb.Options)) (*dynamodb.BatchExecuteStatementOutput, error)

	// The BatchGetItem operation returns the attributes of one or more items from one
	// or more tables. You identify requested items by primary key. A single operation
	// can retrieve up to 16 MB of data, which can contain as many as 100 items.
	// BatchGetItem returns a partial result if the response size limit is exceeded,
	// the table's provisioned throughput is exceeded, or an internal processing
	// failure occurs. If a partial result is returned, the operation returns a value
	// for UnprocessedKeys. You can use this value to retry the operation starting with
	// the next item to get. If you request more than 100 items, BatchGetItem returns a
	// ValidationException with the message "Too many items requested for the
	// BatchGetItem call." For example, if you ask to retrieve 100 items, but each
	// individual item is 300 KB in size, the system returns 52 items (so as not to
	// exceed the 16 MB limit). It also returns an appropriate UnprocessedKeys value so
	// you can get the next page of results. If desired, your application can include
	// its own logic to assemble the pages of results into one dataset. If none of the
	// items can be processed due to insufficient provisioned throughput on all of the
	// tables in the request, then BatchGetItem returns a
	// ProvisionedThroughputExceededException. If at least one of the items is
	// successfully processed, then BatchGetItem completes successfully, while
	// returning the keys of the unread items in UnprocessedKeys. If DynamoDB returns
	// any unprocessed items, you should retry the batch operation on those items.
	// However, we strongly recommend that you use an exponential backoff algorithm. If
	// you retry the batch operation immediately, the underlying read or write requests
	// can still fail due to throttling on the individual tables. If you delay the
	// batch operation using exponential backoff, the individual requests in the batch
	// are much more likely to succeed. For more information, see Batch Operations and
	// Error Handling
	// (https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/ErrorHandling.html#BatchOperations)
	// in the Amazon DynamoDB Developer Guide. By default, BatchGetItem performs
	// eventually consistent reads on every table in the request. If you want strongly
	// consistent reads instead, you can set ConsistentRead to true for any or all
	// tables. In order to minimize response latency, BatchGetItem retrieves items in
	// parallel. When designing your application, keep in mind that DynamoDB does not
	// return items in any particular order. To help parse the response by item,
	// include the primary key values for the items in your request in the
	// ProjectionExpression parameter. If a requested item does not exist, it is not
	// returned in the result. Requests for nonexistent items consume the minimum read
	// capacity units according to the type of read. For more information, see Working
	// with Tables
	// (https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/WorkingWithTables.html#CapacityUnitCalculations)
	// in the Amazon DynamoDB Developer Guide.
	BatchGetItem(ctx context.Context, params *dynamodb.BatchGetItemInput,
		optFns ...func(*dynamodb.Options)) (*dynamodb.BatchGetItemOutput, error)

	// The BatchWriteItem operation puts or deletes multiple items in one or more
	// tables. A single call to BatchWriteItem can transmit up to 16MB of data over the
	// network, consisting of up to 25 item put or delete operations. While individual
	// items can be up to 400 KB once stored, it's important to note that an item's
	// representation might be greater than 400KB while being sent in DynamoDB's JSON
	// format for the API call. For more details on this distinction, see Naming Rules
	// and Data Types
	// (https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/HowItWorks.NamingRulesDataTypes.html).
	// BatchWriteItem cannot update items. To update items, use the UpdateItem action.
	// The individual PutItem and DeleteItem operations specified in BatchWriteItem are
	// atomic; however BatchWriteItem as a whole is not. If any requested operations
	// fail because the table's provisioned throughput is exceeded or an internal
	// processing failure occurs, the failed operations are returned in the
	// UnprocessedItems response parameter. You can investigate and optionally resend
	// the requests. Typically, you would call BatchWriteItem in a loop. Each iteration
	// would check for unprocessed items and submit a new BatchWriteItem request with
	// those unprocessed items until all items have been processed. If none of the
	// items can be processed due to insufficient provisioned throughput on all of the
	// tables in the request, then BatchWriteItem returns a
	// ProvisionedThroughputExceededException. If DynamoDB returns any unprocessed
	// items, you should retry the batch operation on those items. However, we strongly
	// recommend that you use an exponential backoff algorithm. If you retry the batch
	// operation immediately, the underlying read or write requests can still fail due
	// to throttling on the individual tables. If you delay the batch operation using
	// exponential backoff, the individual requests in the batch are much more likely
	// to succeed. For more information, see Batch Operations and Error Handling
	// (https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/ErrorHandling.html#Programming.Errors.BatchOperations)
	// in the Amazon DynamoDB Developer Guide. With BatchWriteItem, you can efficiently
	// write or delete large amounts of data, such as from Amazon EMR, or copy data
	// from another database into DynamoDB. In order to improve performance with these
	// large-scale operations, BatchWriteItem does not behave in the same way as
	// individual PutItem and DeleteItem calls would. For example, you cannot specify
	// conditions on individual put and delete requests, and BatchWriteItem does not
	// return deleted items in the response. If you use a programming language that
	// supports concurrency, you can use threads to write items in parallel. Your
	// application must include the necessary logic to manage the threads. With
	// languages that don't support threading, you must update or delete the specified
	// items one at a time. In both situations, BatchWriteItem performs the specified
	// put and delete operations in parallel, giving you the power of the thread pool
	// approach without having to introduce complexity into your application. Parallel
	// processing reduces latency, but each specified put and delete request consumes
	// the same number of write capacity units whether it is processed in parallel or
	// not. Delete operations on nonexistent items consume one write capacity unit. If
	// one or more of the following is true, DynamoDB rejects the entire batch write
	// operation:
	//
	// * One or more tables specified in the BatchWriteItem request does
	// not exist.
	//
	// * Primary key attributes specified on an item in the request do not
	// match those in the corresponding table's primary key schema.
	//
	// * You try to
	// perform multiple operations on the same item in the same BatchWriteItem request.
	// For example, you cannot put and delete the same item in the same BatchWriteItem
	// request.
	//
	// * Your request contains at least two items with identical hash and
	// range keys (which essentially is two put operations).
	//
	// * There are more than 25
	// requests in the batch.
	//
	// * Any individual item in a batch exceeds 400 KB.
	//
	// * The
	// total request size exceeds 16 MB.
	BatchWriteItem(ctx context.Context, params *dynamodb.BatchWriteItemInput,
		optFns ...func(*dynamodb.Options)) (*dynamodb.BatchWriteItemOutput, error)

	// Creates a backup for an existing table. Each time you create an on-demand
	// backup, the entire table data is backed up. There is no limit to the number of
	// on-demand backups that can be taken. When you create an on-demand backup, a time
	// marker of the request is cataloged, and the backup is created asynchronously, by
	// applying all changes until the time of the request to the last full table
	// snapshot. Backup requests are processed instantaneously and become available for
	// restore within minutes. You can call CreateBackup at a maximum rate of 50 times
	// per second. All backups in DynamoDB work without consuming any provisioned
	// throughput on the table. If you submit a backup request on 2018-12-14 at
	// 14:25:00, the backup is guaranteed to contain all data committed to the table up
	// to 14:24:00, and data committed after 14:26:00 will not be. The backup might
	// contain data modifications made between 14:24:00 and 14:26:00. On-demand backup
	// does not support causal consistency. Along with data, the following are also
	// included on the backups:
	//
	// * Global secondary indexes (GSIs)
	//
	// * Local secondary
	// indexes (LSIs)
	//
	// * Streams
	//
	// * Provisioned read and write capacity
	CreateBackup(ctx context.Context, params *dynamodb.CreateBackupInput,
		optFns ...func(*dynamodb.Options)) (*dynamodb.CreateBackupOutput, error)

	// Creates a global table from an existing table. A global table creates a
	// replication relationship between two or more DynamoDB tables with the same table
	// name in the provided Regions. This operation only applies to Version 2017.11.29
	// (https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/globaltables.V1.html)
	// of global tables. If you want to add a new replica table to a global table, each
	// of the following conditions must be true:
	//
	// * The table must have the same
	// primary key as all of the other replicas.
	//
	// * The table must have the same name
	// as all of the other replicas.
	//
	// * The table must have DynamoDB Streams enabled,
	// with the stream containing both the new and the old images of the item.
	//
	// * None
	// of the replica tables in the global table can contain any data.
	//
	// If global
	// secondary indexes are specified, then the following conditions must also be
	// met:
	//
	// * The global secondary indexes must have the same name.
	//
	// * The global
	// secondary indexes must have the same hash key and sort key (if present).
	//
	// If
	// local secondary indexes are specified, then the following conditions must also
	// be met:
	//
	// * The local secondary indexes must have the same name.
	//
	// * The local
	// secondary indexes must have the same hash key and sort key (if present).
	//
	// Write
	// capacity settings should be set consistently across your replica tables and
	// secondary indexes. DynamoDB strongly recommends enabling auto scaling to manage
	// the write capacity settings for all of your global tables replicas and indexes.
	// If you prefer to manage write capacity settings manually, you should provision
	// equal replicated write capacity units to your replica tables. You should also
	// provision equal replicated write capacity units to matching secondary indexes
	// across your global table.
	CreateGlobalTable(ctx context.Context, params *dynamodb.CreateGlobalTableInput,
		optFns ...func(*dynamodb.Options)) (*dynamodb.CreateGlobalTableOutput, error)

	// The CreateTable operation adds a new table to your account. In an Amazon Web
	// Services account, table names must be unique within each Region. That is, you
	// can have two tables with same name if you create the tables in different
	// Regions. CreateTable is an asynchronous operation. Upon receiving a CreateTable
	// request, DynamoDB immediately returns a response with a TableStatus of CREATING.
	// After the table is created, DynamoDB sets the TableStatus to ACTIVE. You can
	// perform read and write operations only on an ACTIVE table. You can optionally
	// define secondary indexes on the new table, as part of the CreateTable operation.
	// If you want to create multiple tables with secondary indexes on them, you must
	// create the tables sequentially. Only one table with secondary indexes can be in
	// the CREATING state at any given time. You can use the DescribeTable action to
	// check the table status.
	CreateTable(ctx context.Context, params *dynamodb.CreateTableInput,
		optFns ...func(*dynamodb.Options)) (*dynamodb.CreateTableOutput, error)

	// Deletes an existing backup of a table. You can call DeleteBackup at a maximum
	// rate of 10 times per second.
	DeleteBackup(ctx context.Context, params *dynamodb.DeleteBackupInput,
		optFns ...func(*dynamodb.Options)) (*dynamodb.DeleteBackupOutput, error)

	// Deletes a single item in a table by primary key. You can perform a conditional
	// delete operation that deletes the item if it exists, or if it has an expected
	// attribute value. In addition to deleting an item, you can also return the item's
	// attribute values in the same operation, using the ReturnValues parameter. Unless
	// you specify conditions, the DeleteItem is an idempotent operation; running it
	// multiple times on the same item or attribute does not result in an error
	// response. Conditional deletes are useful for deleting items only if specific
	// conditions are met. If those conditions are met, DynamoDB performs the delete.
	// Otherwise, the item is not deleted.
	DeleteItem(ctx context.Context, params *dynamodb.DeleteItemInput,
		optFns ...func(*dynamodb.Options)) (*dynamodb.DeleteItemOutput, error)

	// The DeleteTable operation deletes a table and all of its items. After a
	// DeleteTable request, the specified table is in the DELETING state until DynamoDB
	// completes the deletion. If the table is in the ACTIVE state, you can delete it.
	// If a table is in CREATING or UPDATING states, then DynamoDB returns a
	// ResourceInUseException. If the specified table does not exist, DynamoDB returns
	// a ResourceNotFoundException. If table is already in the DELETING state, no error
	// is returned. DynamoDB might continue to accept data read and write operations,
	// such as GetItem and PutItem, on a table in the DELETING state until the table
	// deletion is complete. When you delete a table, any indexes on that table are
	// also deleted. If you have DynamoDB Streams enabled on the table, then the
	// corresponding stream on that table goes into the DISABLED state, and the stream
	// is automatically deleted after 24 hours. Use the DescribeTable action to check
	// the status of the table.
	DeleteTable(ctx context.Context, params *dynamodb.DeleteTableInput,
		optFns ...func(*dynamodb.Options)) (*dynamodb.DeleteTableOutput, error)

	// Describes an existing backup of a table. You can call DescribeBackup at a
	// maximum rate of 10 times per second.
	DescribeBackup(ctx context.Context, params *dynamodb.DescribeBackupInput,
		optFns ...func(*dynamodb.Options)) (*dynamodb.DescribeBackupOutput, error)

	// Checks the status of continuous backups and point in time recovery on the
	// specified table. Continuous backups are ENABLED on all tables at table creation.
	// If point in time recovery is enabled, PointInTimeRecoveryStatus will be set to
	// ENABLED. After continuous backups and point in time recovery are enabled, you
	// can restore to any point in time within EarliestRestorableDateTime and
	// LatestRestorableDateTime. LatestRestorableDateTime is typically 5 minutes before
	// the current time. You can restore your table to any point in time during the
	// last 35 days. You can call DescribeContinuousBackups at a maximum rate of 10
	// times per second.
	DescribeContinuousBackups(ctx context.Context,
		params *dynamodb.DescribeContinuousBackupsInput,
		optFns ...func(*dynamodb.Options)) (*dynamodb.DescribeContinuousBackupsOutput, error)

	// Returns information about contributor insights, for a given table or global
	// secondary index.
	DescribeContributorInsights(ctx context.Context,
		params *dynamodb.DescribeContributorInsightsInput,
		optFns ...func(*dynamodb.Options)) (*dynamodb.DescribeContributorInsightsOutput, error)

	// Returns the regional endpoint information.
	DescribeEndpoints(ctx context.Context, params *dynamodb.DescribeEndpointsInput,
		optFns ...func(*dynamodb.Options)) (*dynamodb.DescribeEndpointsOutput, error)

	// Describes an existing table export.
	DescribeExport(ctx context.Context, params *dynamodb.DescribeExportInput,
		optFns ...func(*dynamodb.Options)) (*dynamodb.DescribeExportOutput, error)

	// Returns information about the specified global table. This operation only
	// applies to Version 2017.11.29
	// (https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/globaltables.V1.html)
	// of global tables. If you are using global tables Version 2019.11.21
	// (https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/globaltables.V2.html)
	// you can use DescribeTable
	// (https://docs.aws.amazon.com/amazondynamodb/latest/APIReference/API_DescribeTable.html)
	// instead.
	DescribeGlobalTable(ctx context.Context, params *dynamodb.DescribeGlobalTableInput,
		optFns ...func(*dynamodb.Options)) (*dynamodb.DescribeGlobalTableOutput, error)

	// Describes Region-specific settings for a global table. This operation only
	// applies to Version 2017.11.29
	// (https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/globaltables.V1.html)
	// of global tables.
	DescribeGlobalTableSettings(ctx context.Context,
		params *dynamodb.DescribeGlobalTableSettingsInput,
		optFns ...func(*dynamodb.Options)) (*dynamodb.DescribeGlobalTableSettingsOutput, error)

	// Represents the properties of the import.
	DescribeImport(ctx context.Context, params *dynamodb.DescribeImportInput,
		optFns ...func(*dynamodb.Options)) (*dynamodb.DescribeImportOutput, error)

	// Returns information about the status of Kinesis streaming.
	DescribeKinesisStreamingDestination(ctx context.Context,
		params *dynamodb.DescribeKinesisStreamingDestinationInput,
		optFns ...func(*dynamodb.Options)) (*dynamodb.DescribeKinesisStreamingDestinationOutput, error)

	// Returns the current provisioned-capacity quotas for your Amazon Web Services
	// account in a Region, both for the Region as a whole and for any one DynamoDB
	// table that you create there. When you establish an Amazon Web Services account,
	// the account has initial quotas on the maximum read capacity units and write
	// capacity units that you can provision across all of your DynamoDB tables in a
	// given Region. Also, there are per-table quotas that apply when you create a
	// table there. For more information, see Service, Account, and Table Quotas
	// (https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Limits.html)
	// page in the Amazon DynamoDB Developer Guide. Although you can increase these
	// quotas by filing a case at Amazon Web Services Support Center
	// (https://console.aws.amazon.com/support/home#/), obtaining the increase is not
	// instantaneous. The DescribeLimits action lets you write code to compare the
	// capacity you are currently using to those quotas imposed by your account so that
	// you have enough time to apply for an increase before you hit a quota. For
	// example, you could use one of the Amazon Web Services SDKs to do the
	// following:
	//
	// * Call DescribeLimits for a particular Region to obtain your current
	// account quotas on provisioned capacity there.
	//
	// * Create a variable to hold the
	// aggregate read capacity units provisioned for all your tables in that Region,
	// and one to hold the aggregate write capacity units. Zero them both.
	//
	// * Call
	// ListTables to obtain a list of all your DynamoDB tables.
	//
	// * For each table name
	// listed by ListTables, do the following:
	//
	// * Call DescribeTable with the table
	// name.
	//
	// * Use the data returned by DescribeTable to add the read capacity units
	// and write capacity units provisioned for the table itself to your variables.
	//
	// *
	// If the table has one or more global secondary indexes (GSIs), loop over these
	// GSIs and add their provisioned capacity values to your variables as well.
	//
	// *
	// Report the account quotas for that Region returned by DescribeLimits, along with
	// the total current provisioned capacity levels you have calculated.
	//
	// This will
	// let you see whether you are getting close to your account-level quotas. The
	// per-table quotas apply only when you are creating a new table. They restrict the
	// sum of the provisioned capacity of the new table itself and all its global
	// secondary indexes. For existing tables and their GSIs, DynamoDB doesn't let you
	// increase provisioned capacity extremely rapidly, but the only quota that applies
	// is that the aggregate provisioned capacity over all your tables and GSIs cannot
	// exceed either of the per-account quotas. DescribeLimits should only be called
	// periodically. You can expect throttling errors if you call it more than once in
	// a minute. The DescribeLimits Request element has no content.
	DescribeLimits(ctx context.Context, params *dynamodb.DescribeLimitsInput,
		optFns ...func(*dynamodb.Options)) (*dynamodb.DescribeLimitsOutput, error)

	// Returns information about the table, including the current status of the table,
	// when it was created, the primary key schema, and any indexes on the table. If
	// you issue a DescribeTable request immediately after a CreateTable request,
	// DynamoDB might return a ResourceNotFoundException. This is because DescribeTable
	// uses an eventually consistent query, and the metadata for your table might not
	// be available at that moment. Wait for a few seconds, and then try the
	// DescribeTable request again.
	DescribeTable(ctx context.Context, params *dynamodb.DescribeTableInput,
		optFns ...func(*dynamodb.Options)) (*dynamodb.DescribeTableOutput, error)

	// Describes auto scaling settings across replicas of the global table at once.
	// This operation only applies to Version 2019.11.21
	// (https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/globaltables.V2.html)
	// of global tables.
	DescribeTableReplicaAutoScaling(ctx context.Context,
		params *dynamodb.DescribeTableReplicaAutoScalingInput,
		optFns ...func(*dynamodb.Options)) (*dynamodb.DescribeTableReplicaAutoScalingOutput, error)

	// Gives a description of the Time to Live (TTL) status on the specified table.
	DescribeTimeToLive(ctx context.Context, params *dynamodb.DescribeTimeToLiveInput,
		optFns ...func(*dynamodb.Options)) (*dynamodb.DescribeTimeToLiveOutput, error)

	// Stops replication from the DynamoDB table to the Kinesis data stream. This is
	// done without deleting either of the resources.
	DisableKinesisStreamingDestination(ctx context.Context,
		params *dynamodb.DisableKinesisStreamingDestinationInput,
		optFns ...func(*dynamodb.Options)) (*dynamodb.DisableKinesisStreamingDestinationOutput, error)

	// Starts table data replication to the specified Kinesis data stream at a
	// timestamp chosen during the enable workflow. If this operation doesn't return
	// results immediately, use DescribeKinesisStreamingDestination to check if
	// streaming to the Kinesis data stream is ACTIVE.
	EnableKinesisStreamingDestination(ctx context.Context,
		params *dynamodb.EnableKinesisStreamingDestinationInput,
		optFns ...func(*dynamodb.Options)) (*dynamodb.EnableKinesisStreamingDestinationOutput, error)

	// This operation allows you to perform reads and singleton writes on data stored
	// in DynamoDB, using PartiQL. For PartiQL reads (SELECT statement), if the total
	// number of processed items exceeds the maximum dataset size limit of 1 MB, the
	// read stops and results are returned to the user as a LastEvaluatedKey value to
	// continue the read in a subsequent operation. If the filter criteria in WHERE
	// clause does not match any data, the read will return an empty result set. A
	// single SELECT statement response can return up to the maximum number of items
	// (if using the Limit parameter) or a maximum of 1 MB of data (and then apply any
	// filtering to the results using WHERE clause). If LastEvaluatedKey is present in
	// the response, you need to paginate the result set.
	ExecuteStatement(ctx context.Context, params *dynamodb.ExecuteStatementInput,
		optFns ...func(*dynamodb.Options)) (*dynamodb.ExecuteStatementOutput, error)

	// This operation allows you to perform transactional reads or writes on data
	// stored in DynamoDB, using PartiQL. The entire transaction must consist of either
	// read statements or write statements, you cannot mix both in one transaction. The
	// EXISTS function is an exception and can be used to check the condition of
	// specific attributes of the item in a similar manner to ConditionCheck in the
	// TransactWriteItems
	// (https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/transaction-apis.html#transaction-apis-txwriteitems)
	// API.
	ExecuteTransaction(ctx context.Context, params *dynamodb.ExecuteTransactionInput,
		optFns ...func(*dynamodb.Options)) (*dynamodb.ExecuteTransactionOutput, error)

	// Exports table data to an S3 bucket. The table must have point in time recovery
	// enabled, and you can export data from any time within the point in time recovery
	// window.
	ExportTableToPointInTime(ctx context.Context, params *dynamodb.ExportTableToPointInTimeInput,
		optFns ...func(*dynamodb.Options)) (*dynamodb.ExportTableToPointInTimeOutput, error)

	// The GetItem operation returns a set of attributes for the item with the given
	// primary key. If there is no matching item, GetItem does not return any data and
	// there will be no Item element in the response. GetItem provides an eventually
	// consistent read by default. If your application requires a strongly consistent
	// read, set ConsistentRead to true. Although a strongly consistent read might take
	// more time than an eventually consistent read, it always returns the last updated
	// value.
	GetItem(ctx context.Context, params *dynamodb.GetItemInput,
		optFns ...func(*dynamodb.Options)) (*dynamodb.GetItemOutput, error)

	// Imports table data from an S3 bucket.
	ImportTable(ctx context.Context, params *dynamodb.ImportTableInput,
		optFns ...func(*dynamodb.Options)) (*dynamodb.ImportTableOutput, error)

	// List backups associated with an Amazon Web Services account. To list backups for
	// a given table, specify TableName. ListBackups returns a paginated list of
	// results with at most 1 MB worth of items in a page. You can also specify a
	// maximum number of entries to be returned in a page. In the request, start time
	// is inclusive, but end time is exclusive. Note that these boundaries are for the
	// time at which the original backup was requested. You can call ListBackups a
	// maximum of five times per second.
	ListBackups(ctx context.Context, params *dynamodb.ListBackupsInput,
		optFns ...func(*dynamodb.Options)) (*dynamodb.ListBackupsOutput, error)

	// Returns a list of ContributorInsightsSummary for a table and all its global
	// secondary indexes.
	ListContributorInsights(ctx context.Context, params *dynamodb.ListContributorInsightsInput,
		optFns ...func(*dynamodb.Options)) (*dynamodb.ListContributorInsightsOutput, error)

	// Lists completed exports within the past 90 days.
	ListExports(ctx context.Context, params *dynamodb.ListExportsInput,
		optFns ...func(*dynamodb.Options)) (*dynamodb.ListExportsOutput, error)

	// Lists all global tables that have a replica in the specified Region. This
	// operation only applies to Version 2017.11.29
	// (https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/globaltables.V1.html)
	// of global tables.
	ListGlobalTables(ctx context.Context, params *dynamodb.ListGlobalTablesInput,
		optFns ...func(*dynamodb.Options)) (*dynamodb.ListGlobalTablesOutput, error)

	// Lists completed imports within the past 90 days.
	ListImports(ctx context.Context, params *dynamodb.ListImportsInput,
		optFns ...func(*dynamodb.Options)) (*dynamodb.ListImportsOutput, error)

	// Returns an array of table names associated with the current account and
	// endpoint. The output from ListTables is paginated, with each page returning a
	// maximum of 100 table names.
	ListTables(ctx context.Context, params *dynamodb.ListTablesInput,
		optFns ...func(*dynamodb.Options)) (*dynamodb.ListTablesOutput, error)

	// List all tags on an Amazon DynamoDB resource. You can call ListTagsOfResource up
	// to 10 times per second, per account. For an overview on tagging DynamoDB
	// resources, see Tagging for DynamoDB
	// (https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Tagging.html)
	// in the Amazon DynamoDB Developer Guide.
	ListTagsOfResource(ctx context.Context, params *dynamodb.ListTagsOfResourceInput,
		optFns ...func(*dynamodb.Options)) (*dynamodb.ListTagsOfResourceOutput, error)

	// Creates a new item, or replaces an old item with a new item. If an item that has
	// the same primary key as the new item already exists in the specified table, the
	// new item completely replaces the existing item. You can perform a conditional
	// put operation (add a new item if one with the specified primary key doesn't
	// exist), or replace an existing item if it has certain attribute values. You can
	// return the item's attribute values in the same operation, using the ReturnValues
	// parameter. When you add an item, the primary key attributes are the only
	// required attributes. Attribute values cannot be null. Empty String and Binary
	// attribute values are allowed. Attribute values of type String and Binary must
	// have a length greater than zero if the attribute is used as a key attribute for
	// a table or index. Set type attributes cannot be empty. Invalid Requests with
	// empty values will be rejected with a ValidationException exception. To prevent a
	// new item from replacing an existing item, use a conditional expression that
	// contains the attribute_not_exists function with the name of the attribute being
	// used as the partition key for the table. Since every record must contain that
	// attribute, the attribute_not_exists function will only succeed if no matching
	// item exists. For more information about PutItem, see Working with Items
	// (https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/WorkingWithItems.html)
	// in the Amazon DynamoDB Developer Guide.
	PutItem(ctx context.Context, params *dynamodb.PutItemInput,
		optFns ...func(*dynamodb.Options)) (*dynamodb.PutItemOutput, error)

	// You must provide the name of the partition key attribute and a single value for
	// that attribute. Query returns all items with that partition key value.
	// Optionally, you can provide a sort key attribute and use a comparison operator
	// to refine the search results. Use the KeyConditionExpression parameter to
	// provide a specific value for the partition key. The Query operation will return
	// all of the items from the table or index with that partition key value. You can
	// optionally narrow the scope of the Query operation by specifying a sort key
	// value and a comparison operator in KeyConditionExpression. To further refine the
	// Query results, you can optionally provide a FilterExpression. A FilterExpression
	// determines which items within the results should be returned to you. All of the
	// other results are discarded. A Query operation always returns a result set. If
	// no matching items are found, the result set will be empty. Queries that do not
	// return results consume the minimum number of read capacity units for that type
	// of read operation. DynamoDB calculates the number of read capacity units
	// consumed based on item size, not on the amount of data that is returned to an
	// application. The number of capacity units consumed will be the same whether you
	// request all of the attributes (the default behavior) or just some of them (using
	// a projection expression). The number will also be the same whether or not you
	// use a FilterExpression. Query results are always sorted by the sort key value.
	// If the data type of the sort key is Number, the results are returned in numeric
	// order; otherwise, the results are returned in order of UTF-8 bytes. By default,
	// the sort order is ascending. To reverse the order, set the ScanIndexForward
	// parameter to false. A single Query operation will read up to the maximum number
	// of items set (if using the Limit parameter) or a maximum of 1 MB of data and
	// then apply any filtering to the results using FilterExpression. If
	// LastEvaluatedKey is present in the response, you will need to paginate the
	// result set. For more information, see Paginating the Results
	// (https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Query.html#Query.Pagination)
	// in the Amazon DynamoDB Developer Guide. FilterExpression is applied after a
	// Query finishes, but before the results are returned. A FilterExpression cannot
	// contain partition key or sort key attributes. You need to specify those
	// attributes in the KeyConditionExpression. A Query operation can return an empty
	// result set and a LastEvaluatedKey if all the items read for the page of results
	// are filtered out. You can query a table, a local secondary index, or a global
	// secondary index. For a query on a table or on a local secondary index, you can
	// set the ConsistentRead parameter to true and obtain a strongly consistent
	// result. Global secondary indexes support eventually consistent reads only, so do
	// not specify ConsistentRead when querying a global secondary index.
	Query(ctx context.Context, params *dynamodb.QueryInput,
		optFns ...func(*dynamodb.Options)) (*dynamodb.QueryOutput, error)

	// Creates a new table from an existing backup. Any number of users can execute up
	// to 4 concurrent restores (any type of restore) in a given account. You can call
	// RestoreTableFromBackup at a maximum rate of 10 times per second. You must
	// manually set up the following on the restored table:
	//
	// * Auto scaling policies
	//
	// *
	// IAM policies
	//
	// * Amazon CloudWatch metrics and alarms
	//
	// * Tags
	//
	// * Stream
	// settings
	//
	// * Time to Live (TTL) settings
	RestoreTableFromBackup(ctx context.Context, params *dynamodb.RestoreTableFromBackupInput,
		optFns ...func(*dynamodb.Options)) (*dynamodb.RestoreTableFromBackupOutput, error)

	// Restores the specified table to the specified point in time within
	// EarliestRestorableDateTime and LatestRestorableDateTime. You can restore your
	// table to any point in time during the last 35 days. Any number of users can
	// execute up to 4 concurrent restores (any type of restore) in a given account.
	// When you restore using point in time recovery, DynamoDB restores your table data
	// to the state based on the selected date and time (day:hour:minute:second) to a
	// new table. Along with data, the following are also included on the new restored
	// table using point in time recovery:
	//
	// * Global secondary indexes (GSIs)
	//
	// * Local
	// secondary indexes (LSIs)
	//
	// * Provisioned read and write capacity
	//
	// * Encryption
	// settings All these settings come from the current settings of the source table
	// at the time of restore.
	//
	// You must manually set up the following on the restored
	// table:
	//
	// * Auto scaling policies
	//
	// * IAM policies
	//
	// * Amazon CloudWatch metrics and
	// alarms
	//
	// * Tags
	//
	// * Stream settings
	//
	// * Time to Live (TTL) settings
	//
	// * Point in
	// time recovery settings
	RestoreTableToPointInTime(ctx context.Context, params *dynamodb.RestoreTableToPointInTimeInput,
		optFns ...func(*dynamodb.Options)) (*dynamodb.RestoreTableToPointInTimeOutput, error)

	// The Scan operation returns one or more items and item attributes by accessing
	// every item in a table or a secondary index. To have DynamoDB return fewer items,
	// you can provide a FilterExpression operation. If the total number of scanned
	// items exceeds the maximum dataset size limit of 1 MB, the scan stops and results
	// are returned to the user as a LastEvaluatedKey value to continue the scan in a
	// subsequent operation. The results also include the number of items exceeding the
	// limit. A scan can result in no table data meeting the filter criteria. A single
	// Scan operation reads up to the maximum number of items set (if using the Limit
	// parameter) or a maximum of 1 MB of data and then apply any filtering to the
	// results using FilterExpression. If LastEvaluatedKey is present in the response,
	// you need to paginate the result set. For more information, see Paginating the
	// Results
	// (https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Scan.html#Scan.Pagination)
	// in the Amazon DynamoDB Developer Guide. Scan operations proceed sequentially;
	// however, for faster performance on a large table or secondary index,
	// applications can request a parallel Scan operation by providing the Segment and
	// TotalSegments parameters. For more information, see Parallel Scan
	// (https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Scan.html#Scan.ParallelScan)
	// in the Amazon DynamoDB Developer Guide. Scan uses eventually consistent reads
	// when accessing the data in a table; therefore, the result set might not include
	// the changes to data in the table immediately before the operation began. If you
	// need a consistent copy of the data, as of the time that the Scan begins, you can
	// set the ConsistentRead parameter to true.
	Scan(ctx context.Context, params *dynamodb.ScanInput,
		optFns ...func(*dynamodb.Options)) (*dynamodb.ScanOutput, error)

	// Associate a set of tags with an Amazon DynamoDB resource. You can then activate
	// these user-defined tags so that they appear on the Billing and Cost Management
	// console for cost allocation tracking. You can call TagResource up to five times
	// per second, per account. For an overview on tagging DynamoDB resources, see
	// Tagging for DynamoDB
	// (https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Tagging.html)
	// in the Amazon DynamoDB Developer Guide.
	TagResource(ctx context.Context, params *dynamodb.TagResourceInput,
		optFns ...func(*dynamodb.Options)) (*dynamodb.TagResourceOutput, error)

	// TransactGetItems is a synchronous operation that atomically retrieves multiple
	// items from one or more tables (but not from indexes) in a single account and
	// Region. A TransactGetItems call can contain up to 25 TransactGetItem objects,
	// each of which contains a Get structure that specifies an item to retrieve from a
	// table in the account and Region. A call to TransactGetItems cannot retrieve
	// items from tables in more than one Amazon Web Services account or Region. The
	// aggregate size of the items in the transaction cannot exceed 4 MB. DynamoDB
	// rejects the entire TransactGetItems request if any of the following is true:
	//
	// *
	// A conflicting operation is in the process of updating an item to be read.
	//
	// *
	// There is insufficient provisioned capacity for the transaction to be
	// completed.
	//
	// * There is a user error, such as an invalid data format.
	//
	// * The
	// aggregate size of the items in the transaction cannot exceed 4 MB.
	TransactGetItems(ctx context.Context, params *dynamodb.TransactGetItemsInput,
		optFns ...func(*dynamodb.Options)) (*dynamodb.TransactGetItemsOutput, error)

	// TransactWriteItems is a synchronous write operation that groups up to 25 action
	// requests. These actions can target items in different tables, but not in
	// different Amazon Web Services accounts or Regions, and no two actions can target
	// the same item. For example, you cannot both ConditionCheck and Update the same
	// item. The aggregate size of the items in the transaction cannot exceed 4 MB. The
	// actions are completed atomically so that either all of them succeed, or all of
	// them fail. They are defined by the following objects:
	//
	// * Put — Initiates a
	// PutItem operation to write a new item. This structure specifies the primary key
	// of the item to be written, the name of the table to write it in, an optional
	// condition expression that must be satisfied for the write to succeed, a list of
	// the item's attributes, and a field indicating whether to retrieve the item's
	// attributes if the condition is not met.
	//
	// * Update — Initiates an UpdateItem
	// operation to update an existing item. This structure specifies the primary key
	// of the item to be updated, the name of the table where it resides, an optional
	// condition expression that must be satisfied for the update to succeed, an
	// expression that defines one or more attributes to be updated, and a field
	// indicating whether to retrieve the item's attributes if the condition is not
	// met.
	//
	// * Delete — Initiates a DeleteItem operation to delete an existing item.
	// This structure specifies the primary key of the item to be deleted, the name of
	// the table where it resides, an optional condition expression that must be
	// satisfied for the deletion to succeed, and a field indicating whether to
	// retrieve the item's attributes if the condition is not met.
	//
	// * ConditionCheck —
	// Applies a condition to an item that is not being modified by the transaction.
	// This structure specifies the primary key of the item to be checked, the name of
	// the table where it resides, a condition expression that must be satisfied for
	// the transaction to succeed, and a field indicating whether to retrieve the
	// item's attributes if the condition is not met.
	//
	// DynamoDB rejects the entire
	// TransactWriteItems request if any of the following is true:
	//
	// * A condition in
	// one of the condition expressions is not met.
	//
	// * An ongoing operation is in the
	// process of updating the same item.
	//
	// * There is insufficient provisioned capacity
	// for the transaction to be completed.
	//
	// * An item size becomes too large (bigger
	// than 400 KB), a local secondary index (LSI) becomes too large, or a similar
	// validation error occurs because of changes made by the transaction.
	//
	// * The
	// aggregate size of the items in the transaction exceeds 4 MB.
	//
	// * There is a user
	// error, such as an invalid data format.
	TransactWriteItems(ctx context.Context, params *dynamodb.TransactWriteItemsInput,
		optFns ...func(*dynamodb.Options)) (*dynamodb.TransactWriteItemsOutput, error)

	// Removes the association of tags from an Amazon DynamoDB resource. You can call
	// UntagResource up to five times per second, per account. For an overview on
	// tagging DynamoDB resources, see Tagging for DynamoDB
	// (https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Tagging.html)
	// in the Amazon DynamoDB Developer Guide.
	UntagResource(ctx context.Context, params *dynamodb.UntagResourceInput,
		optFns ...func(*dynamodb.Options)) (*dynamodb.UntagResourceOutput, error)

	// UpdateContinuousBackups enables or disables point in time recovery for the
	// specified table. A successful UpdateContinuousBackups call returns the current
	// ContinuousBackupsDescription. Continuous backups are ENABLED on all tables at
	// table creation. If point in time recovery is enabled, PointInTimeRecoveryStatus
	// will be set to ENABLED. Once continuous backups and point in time recovery are
	// enabled, you can restore to any point in time within EarliestRestorableDateTime
	// and LatestRestorableDateTime. LatestRestorableDateTime is typically 5 minutes
	// before the current time. You can restore your table to any point in time during
	// the last 35 days.
	UpdateContinuousBackups(ctx context.Context, params *dynamodb.UpdateContinuousBackupsInput,
		optFns ...func(*dynamodb.Options)) (*dynamodb.UpdateContinuousBackupsOutput, error)

	// Updates the status for contributor insights for a specific table or index.
	// CloudWatch Contributor Insights for DynamoDB graphs display the partition key
	// and (if applicable) sort key of frequently accessed items and frequently
	// throttled items in plaintext. If you require the use of Amazon Web Services Key
	// Management Service (KMS) to encrypt this table’s partition key and sort key data
	// with an Amazon Web Services managed key or customer managed key, you should not
	// enable CloudWatch Contributor Insights for DynamoDB for this table.
	UpdateContributorInsights(ctx context.Context, params *dynamodb.UpdateContributorInsightsInput,
		optFns ...func(*dynamodb.Options)) (*dynamodb.UpdateContributorInsightsOutput, error)

	// Adds or removes replicas in the specified global table. The global table must
	// already exist to be able to use this operation. Any replica to be added must be
	// empty, have the same name as the global table, have the same key schema, have
	// DynamoDB Streams enabled, and have the same provisioned and maximum write
	// capacity units. Although you can use UpdateGlobalTable to add replicas and
	// remove replicas in a single request, for simplicity we recommend that you issue
	// separate requests for adding or removing replicas. If global secondary indexes
	// are specified, then the following conditions must also be met:
	//
	// * The global
	// secondary indexes must have the same name.
	//
	// * The global secondary indexes must
	// have the same hash key and sort key (if present).
	//
	// * The global secondary
	// indexes must have the same provisioned and maximum write capacity units.
	UpdateGlobalTable(ctx context.Context, params *dynamodb.UpdateGlobalTableInput,
		optFns ...func(*dynamodb.Options)) (*dynamodb.UpdateGlobalTableOutput, error)

	// Updates settings for a global table.
	UpdateGlobalTableSettings(ctx context.Context,
		params *dynamodb.UpdateGlobalTableSettingsInput,
		optFns ...func(*dynamodb.Options)) (*dynamodb.UpdateGlobalTableSettingsOutput, error)

	// Edits an existing item's attributes, or adds a new item to the table if it does
	// not already exist. You can put, delete, or add attribute values. You can also
	// perform a conditional update on an existing item (insert a new attribute
	// name-value pair if it doesn't exist, or replace an existing name-value pair if
	// it has certain expected attribute values). You can also return the item's
	// attribute values in the same UpdateItem operation using the ReturnValues
	// parameter.
	UpdateItem(ctx context.Context, params *dynamodb.UpdateItemInput,
		optFns ...func(*dynamodb.Options)) (*dynamodb.UpdateItemOutput, error)

	// Modifies the provisioned throughput settings, global secondary indexes, or
	// DynamoDB Streams settings for a given table. You can only perform one of the
	// following operations at once:
	//
	// * Modify the provisioned throughput settings of
	// the table.
	//
	// * Remove a global secondary index from the table.
	//
	// * Create a new
	// global secondary index on the table. After the index begins backfilling, you can
	// use UpdateTable to perform other operations.
	//
	// UpdateTable is an asynchronous
	// operation; while it is executing, the table status changes from ACTIVE to
	// UPDATING. While it is UPDATING, you cannot issue another UpdateTable request.
	// When the table returns to the ACTIVE state, the UpdateTable operation is
	// complete.
	UpdateTable(ctx context.Context, params *dynamodb.UpdateTableInput,
		optFns ...func(*dynamodb.Options)) (*dynamodb.UpdateTableOutput, error)

	// Updates auto scaling settings on your global tables at once. This operation only
	// applies to Version 2019.11.21
	// (https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/globaltables.V2.html)
	// of global tables.
	UpdateTableReplicaAutoScaling(ctx context.Context,
		params *dynamodb.UpdateTableReplicaAutoScalingInput,
		optFns ...func(*dynamodb.Options)) (*dynamodb.UpdateTableReplicaAutoScalingOutput, error)

	// The UpdateTimeToLive method enables or disables Time to Live (TTL) for the
	// specified table. A successful UpdateTimeToLive call returns the current
	// TimeToLiveSpecification. It can take up to one hour for the change to fully
	// process. Any additional UpdateTimeToLive calls for the same table during this
	// one hour duration result in a ValidationException. TTL compares the current time
	// in epoch time format to the time stored in the TTL attribute of an item. If the
	// epoch time value stored in the attribute is less than the current time, the item
	// is marked as expired and subsequently deleted. The epoch time format is the
	// number of seconds elapsed since 12:00:00 AM January 1, 1970 UTC. DynamoDB
	// deletes expired items on a best-effort basis to ensure availability of
	// throughput for other data operations. DynamoDB typically deletes expired items
	// within two days of expiration. The exact duration within which an item gets
	// deleted after expiration is specific to the nature of the workload. Items that
	// have expired and not been deleted will still show up in reads, queries, and
	// scans. As items are deleted, they are removed from any local secondary index and
	// global secondary index immediately in the same eventually consistent way as a
	// standard delete operation. For more information, see Time To Live
	// (https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/TTL.html) in
	// the Amazon DynamoDB Developer Guide.
	UpdateTimeToLive(ctx context.Context, params *dynamodb.UpdateTimeToLiveInput,
		optFns ...func(*dynamodb.Options)) (*dynamodb.UpdateTimeToLiveOutput, error)
}

DynamoDBAPI describes all the functionality implemented by the AWS Go SDK v2 DynamoDB client

type Error 

type Error struct {
	*utils.GError
	TableName string
}

Error describes an error returned by the DynamoDB database connection

type IDynamoDBOption 

type IDynamoDBOption interface {
	Apply(*DatabaseConnection)
}

IDynamoDBOption defines the functionality that will allow the behavior of a DatabaseConnection to be modified at construction

type WithBackoffEnd 

type WithBackoffEnd time.Duration

WithBackoffEnd allows the user to set the ending time to use when backing off from a DynamoDB error that should be retried

func (WithBackoffEnd) Apply 

func (w WithBackoffEnd) Apply(conn *DatabaseConnection)

Apply modifies the DatabaseConnection so that it has the end interval defined by this object

type WithBackoffMaxElapsed 

type WithBackoffMaxElapsed time.Duration

WithBackoffMaxElapsed allows the user to set the maximum time that should be allowed when DynamoDB returns an error that should be retried

func (WithBackoffMaxElapsed) Apply 

func (w WithBackoffMaxElapsed) Apply(conn *DatabaseConnection)

Apply modifies the DatabaseConnection so that it has the maximum interval defined by this object

type WithBackoffStart 

type WithBackoffStart time.Duration

WithBackoffStart allows the user to set the starting time to use when backing off from a DynamoDB error that should be retried

func (WithBackoffStart) Apply 

func (w WithBackoffStart) Apply(conn *DatabaseConnection)

Apply modifies the DatabaseConnection so that it has the start interval defined by this object

type WithTagKey added in v1.1.34 

type WithTagKey string

WithTagKey allows the user to set the field tag that should be used when marshalling data to DynamoDB attribute values or when unmarshalling data from DynamoDB attribute values

func (WithTagKey) Apply added in v1.1.34 

func (w WithTagKey) Apply(conn *DatabaseConnection)

Apply modifies the DatabaseConnection so that it has the tag key defined by this object

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.