av1

package
v1.4.2 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: May 9, 2016 License: GPL-3.0, BSD-2-Clause Imports: 4 Imported by: 0

Documentation

Overview

Client for UPnP Device Control Protocol MediaServer v1 and MediaRenderer v1.

This DCP is documented in detail at: http://upnp.org/specs/av/av1/

Typically, use one of the New* functions to create clients for services.

Index

Constants

View Source 
const (
	URN_AVTransport_1        = "urn:schemas-upnp-org:service:AVTransport:1"
	URN_AVTransport_2        = "urn:schemas-upnp-org:service:AVTransport:2"
	URN_ConnectionManager_1  = "urn:schemas-upnp-org:service:ConnectionManager:1"
	URN_ConnectionManager_2  = "urn:schemas-upnp-org:service:ConnectionManager:2"
	URN_ContentDirectory_1   = "urn:schemas-upnp-org:service:ContentDirectory:1"
	URN_ContentDirectory_2   = "urn:schemas-upnp-org:service:ContentDirectory:2"
	URN_ContentDirectory_3   = "urn:schemas-upnp-org:service:ContentDirectory:3"
	URN_RenderingControl_1   = "urn:schemas-upnp-org:service:RenderingControl:1"
	URN_RenderingControl_2   = "urn:schemas-upnp-org:service:RenderingControl:2"
	URN_ScheduledRecording_1 = "urn:schemas-upnp-org:service:ScheduledRecording:1"
	URN_ScheduledRecording_2 = "urn:schemas-upnp-org:service:ScheduledRecording:2"
)

Service URNs:

Variables

This section is empty.

Functions

This section is empty.

Types

type AVTransport1 

type AVTransport1 struct {
	goupnp.ServiceClient
}

AVTransport1 is a client for UPnP SOAP service with URN "urn:schemas-upnp-org:service:AVTransport:1". See goupnp.ServiceClient, which contains RootDevice and Service attributes which are provided for informational value.

func NewAVTransport1Clients 

func NewAVTransport1Clients() (clients []*AVTransport1, errors []error, err error)

NewAVTransport1Clients discovers instances of the service on the network, and returns clients to any that are found. errors will contain an error for any devices that replied but which could not be queried, and err will be set if the discovery process failed outright.

This is a typical entry calling point into this package.

func NewAVTransport1ClientsByURL 

func NewAVTransport1ClientsByURL(loc *url.URL) ([]*AVTransport1, error)

NewAVTransport1ClientsByURL discovers instances of the service at the given URL, and returns clients to any that are found. An error is returned if there was an error probing the service.

This is a typical entry calling point into this package when reusing an previously discovered service URL.

func NewAVTransport1ClientsFromRootDevice 

func NewAVTransport1ClientsFromRootDevice(rootDevice *goupnp.RootDevice, loc *url.URL) ([]*AVTransport1, error)

NewAVTransport1ClientsFromRootDevice discovers instances of the service in a given root device, and returns clients to any that are found. An error is returned if there was not at least one instance of the service within the device. The location parameter is simply assigned to the Location attribute of the wrapped ServiceClient(s).

This is a typical entry calling point into this package when reusing an previously discovered root device.

func (*AVTransport1) GetCurrentTransportActions 

func (client *AVTransport1) GetCurrentTransportActions(InstanceID uint32) (Actions string, err error)

func (*AVTransport1) GetDeviceCapabilities 

func (client *AVTransport1) GetDeviceCapabilities(InstanceID uint32) (PlayMedia string, RecMedia string, RecQualityModes string, err error)

func (*AVTransport1) GetMediaInfo 

func (client *AVTransport1) GetMediaInfo(InstanceID uint32) (NrTracks uint32, MediaDuration string, CurrentURI string, CurrentURIMetaData string, NextURI string, NextURIMetaData string, PlayMedium string, RecordMedium string, WriteStatus string, err error)

Return values:

* NrTracks: allowed value range: minimum=0

func (*AVTransport1) GetPositionInfo 

func (client *AVTransport1) GetPositionInfo(InstanceID uint32) (Track uint32, TrackDuration string, TrackMetaData string, TrackURI string, RelTime string, AbsTime string, RelCount int32, AbsCount int32, err error)

Return values:

* Track: allowed value range: minimum=0, step=1

func (*AVTransport1) GetTransportInfo 

func (client *AVTransport1) GetTransportInfo(InstanceID uint32) (CurrentTransportState string, CurrentTransportStatus string, CurrentSpeed string, err error)

Return values:

* CurrentTransportState: allowed values: STOPPED, PLAYING

* CurrentTransportStatus: allowed values: OK, ERROR_OCCURRED

* CurrentSpeed: allowed values: 1

func (*AVTransport1) GetTransportSettings 

func (client *AVTransport1) GetTransportSettings(InstanceID uint32) (PlayMode string, RecQualityMode string, err error)

Return values:

* PlayMode: allowed values: NORMAL

func (*AVTransport1) Next 

func (client *AVTransport1) Next(InstanceID uint32) (err error)

func (*AVTransport1) Pause 

func (client *AVTransport1) Pause(InstanceID uint32) (err error)

func (*AVTransport1) Play 

func (client *AVTransport1) Play(InstanceID uint32, Speed string) (err error)

func (*AVTransport1) Previous 

func (client *AVTransport1) Previous(InstanceID uint32) (err error)

func (*AVTransport1) Record 

func (client *AVTransport1) Record(InstanceID uint32) (err error)

func (*AVTransport1) Seek 

func (client *AVTransport1) Seek(InstanceID uint32, Unit string, Target string) (err error)

func (*AVTransport1) SetAVTransportURI 

func (client *AVTransport1) SetAVTransportURI(InstanceID uint32, CurrentURI string, CurrentURIMetaData string) (err error)

func (*AVTransport1) SetNextAVTransportURI 

func (client *AVTransport1) SetNextAVTransportURI(InstanceID uint32, NextURI string, NextURIMetaData string) (err error)

func (*AVTransport1) SetPlayMode 

func (client *AVTransport1) SetPlayMode(InstanceID uint32, NewPlayMode string) (err error)

func (*AVTransport1) SetRecordQualityMode 

func (client *AVTransport1) SetRecordQualityMode(InstanceID uint32, NewRecordQualityMode string) (err error)

func (*AVTransport1) Stop 

func (client *AVTransport1) Stop(InstanceID uint32) (err error)

type AVTransport2 

type AVTransport2 struct {
	goupnp.ServiceClient
}

AVTransport2 is a client for UPnP SOAP service with URN "urn:schemas-upnp-org:service:AVTransport:2". See goupnp.ServiceClient, which contains RootDevice and Service attributes which are provided for informational value.

func NewAVTransport2Clients 

func NewAVTransport2Clients() (clients []*AVTransport2, errors []error, err error)

NewAVTransport2Clients discovers instances of the service on the network, and returns clients to any that are found. errors will contain an error for any devices that replied but which could not be queried, and err will be set if the discovery process failed outright.

This is a typical entry calling point into this package.

func NewAVTransport2ClientsByURL 

func NewAVTransport2ClientsByURL(loc *url.URL) ([]*AVTransport2, error)

NewAVTransport2ClientsByURL discovers instances of the service at the given URL, and returns clients to any that are found. An error is returned if there was an error probing the service.

This is a typical entry calling point into this package when reusing an previously discovered service URL.

func NewAVTransport2ClientsFromRootDevice 

func NewAVTransport2ClientsFromRootDevice(rootDevice *goupnp.RootDevice, loc *url.URL) ([]*AVTransport2, error)

NewAVTransport2ClientsFromRootDevice discovers instances of the service in a given root device, and returns clients to any that are found. An error is returned if there was not at least one instance of the service within the device. The location parameter is simply assigned to the Location attribute of the wrapped ServiceClient(s).

This is a typical entry calling point into this package when reusing an previously discovered root device.

func (*AVTransport2) GetCurrentTransportActions 

func (client *AVTransport2) GetCurrentTransportActions(InstanceID uint32) (Actions string, err error)

func (*AVTransport2) GetDRMState 

func (client *AVTransport2) GetDRMState(InstanceID uint32) (CurrentDRMState string, err error)

Return values:

* CurrentDRMState: allowed values: OK

func (*AVTransport2) GetDeviceCapabilities 

func (client *AVTransport2) GetDeviceCapabilities(InstanceID uint32) (PlayMedia string, RecMedia string, RecQualityModes string, err error)

func (*AVTransport2) GetMediaInfo 

func (client *AVTransport2) GetMediaInfo(InstanceID uint32) (NrTracks uint32, MediaDuration string, CurrentURI string, CurrentURIMetaData string, NextURI string, NextURIMetaData string, PlayMedium string, RecordMedium string, WriteStatus string, err error)

Return values:

* NrTracks: allowed value range: minimum=0

func (*AVTransport2) GetMediaInfo_Ext 

func (client *AVTransport2) GetMediaInfo_Ext(InstanceID uint32) (CurrentType string, NrTracks uint32, MediaDuration string, CurrentURI string, CurrentURIMetaData string, NextURI string, NextURIMetaData string, PlayMedium string, RecordMedium string, WriteStatus string, err error)

Return values:

* CurrentType: allowed values: NO_MEDIA, TRACK_AWARE, TRACK_UNAWARE

* NrTracks: allowed value range: minimum=0

func (*AVTransport2) GetPositionInfo 

func (client *AVTransport2) GetPositionInfo(InstanceID uint32) (Track uint32, TrackDuration string, TrackMetaData string, TrackURI string, RelTime string, AbsTime string, RelCount int32, AbsCount int32, err error)

Return values:

* Track: allowed value range: minimum=0, step=1

func (*AVTransport2) GetStateVariables 

func (client *AVTransport2) GetStateVariables(InstanceID uint32, StateVariableList string) (StateVariableValuePairs string, err error)

func (*AVTransport2) GetTransportInfo 

func (client *AVTransport2) GetTransportInfo(InstanceID uint32) (CurrentTransportState string, CurrentTransportStatus string, CurrentSpeed string, err error)

Return values:

* CurrentTransportState: allowed values: STOPPED, PLAYING

* CurrentTransportStatus: allowed values: OK, ERROR_OCCURRED

* CurrentSpeed: allowed values: 1

func (*AVTransport2) GetTransportSettings 

func (client *AVTransport2) GetTransportSettings(InstanceID uint32) (PlayMode string, RecQualityMode string, err error)

Return values:

* PlayMode: allowed values: NORMAL

func (*AVTransport2) Next 

func (client *AVTransport2) Next(InstanceID uint32) (err error)

func (*AVTransport2) Pause 

func (client *AVTransport2) Pause(InstanceID uint32) (err error)

func (*AVTransport2) Play 

func (client *AVTransport2) Play(InstanceID uint32, Speed string) (err error)

func (*AVTransport2) Previous 

func (client *AVTransport2) Previous(InstanceID uint32) (err error)

func (*AVTransport2) Record 

func (client *AVTransport2) Record(InstanceID uint32) (err error)

func (*AVTransport2) Seek 

func (client *AVTransport2) Seek(InstanceID uint32, Unit string, Target string) (err error)

func (*AVTransport2) SetAVTransportURI 

func (client *AVTransport2) SetAVTransportURI(InstanceID uint32, CurrentURI string, CurrentURIMetaData string) (err error)

func (*AVTransport2) SetNextAVTransportURI 

func (client *AVTransport2) SetNextAVTransportURI(InstanceID uint32, NextURI string, NextURIMetaData string) (err error)

func (*AVTransport2) SetPlayMode 

func (client *AVTransport2) SetPlayMode(InstanceID uint32, NewPlayMode string) (err error)

func (*AVTransport2) SetRecordQualityMode 

func (client *AVTransport2) SetRecordQualityMode(InstanceID uint32, NewRecordQualityMode string) (err error)

func (*AVTransport2) SetStateVariables 

func (client *AVTransport2) SetStateVariables(InstanceID uint32, AVTransportUDN string, ServiceType string, ServiceId string, StateVariableValuePairs string) (StateVariableList string, err error)

func (*AVTransport2) Stop 

func (client *AVTransport2) Stop(InstanceID uint32) (err error)

type ConnectionManager1 

type ConnectionManager1 struct {
	goupnp.ServiceClient
}

ConnectionManager1 is a client for UPnP SOAP service with URN "urn:schemas-upnp-org:service:ConnectionManager:1". See goupnp.ServiceClient, which contains RootDevice and Service attributes which are provided for informational value.

func NewConnectionManager1Clients 

func NewConnectionManager1Clients() (clients []*ConnectionManager1, errors []error, err error)

NewConnectionManager1Clients discovers instances of the service on the network, and returns clients to any that are found. errors will contain an error for any devices that replied but which could not be queried, and err will be set if the discovery process failed outright.

This is a typical entry calling point into this package.

func NewConnectionManager1ClientsByURL 

func NewConnectionManager1ClientsByURL(loc *url.URL) ([]*ConnectionManager1, error)

NewConnectionManager1ClientsByURL discovers instances of the service at the given URL, and returns clients to any that are found. An error is returned if there was an error probing the service.

This is a typical entry calling point into this package when reusing an previously discovered service URL.

func NewConnectionManager1ClientsFromRootDevice 

func NewConnectionManager1ClientsFromRootDevice(rootDevice *goupnp.RootDevice, loc *url.URL) ([]*ConnectionManager1, error)

NewConnectionManager1ClientsFromRootDevice discovers instances of the service in a given root device, and returns clients to any that are found. An error is returned if there was not at least one instance of the service within the device. The location parameter is simply assigned to the Location attribute of the wrapped ServiceClient(s).

This is a typical entry calling point into this package when reusing an previously discovered root device.

func (*ConnectionManager1) ConnectionComplete 

func (client *ConnectionManager1) ConnectionComplete(ConnectionID int32) (err error)

func (*ConnectionManager1) GetCurrentConnectionIDs 

func (client *ConnectionManager1) GetCurrentConnectionIDs() (ConnectionIDs string, err error)

func (*ConnectionManager1) GetCurrentConnectionInfo 

func (client *ConnectionManager1) GetCurrentConnectionInfo(ConnectionID int32) (RcsID int32, AVTransportID int32, ProtocolInfo string, PeerConnectionManager string, PeerConnectionID int32, Direction string, Status string, err error)

Return values:

* Direction: allowed values: Input, Output

* Status: allowed values: OK, ContentFormatMismatch, InsufficientBandwidth, UnreliableChannel, Unknown

func (*ConnectionManager1) GetProtocolInfo 

func (client *ConnectionManager1) GetProtocolInfo() (Source string, Sink string, err error)

func (*ConnectionManager1) PrepareForConnection 

func (client *ConnectionManager1) PrepareForConnection(RemoteProtocolInfo string, PeerConnectionManager string, PeerConnectionID int32, Direction string) (ConnectionID int32, AVTransportID int32, RcsID int32, err error)

type ConnectionManager2 

type ConnectionManager2 struct {
	goupnp.ServiceClient
}

ConnectionManager2 is a client for UPnP SOAP service with URN "urn:schemas-upnp-org:service:ConnectionManager:2". See goupnp.ServiceClient, which contains RootDevice and Service attributes which are provided for informational value.

func NewConnectionManager2Clients 

func NewConnectionManager2Clients() (clients []*ConnectionManager2, errors []error, err error)

NewConnectionManager2Clients discovers instances of the service on the network, and returns clients to any that are found. errors will contain an error for any devices that replied but which could not be queried, and err will be set if the discovery process failed outright.

This is a typical entry calling point into this package.

func NewConnectionManager2ClientsByURL 

func NewConnectionManager2ClientsByURL(loc *url.URL) ([]*ConnectionManager2, error)

NewConnectionManager2ClientsByURL discovers instances of the service at the given URL, and returns clients to any that are found. An error is returned if there was an error probing the service.

This is a typical entry calling point into this package when reusing an previously discovered service URL.

func NewConnectionManager2ClientsFromRootDevice 

func NewConnectionManager2ClientsFromRootDevice(rootDevice *goupnp.RootDevice, loc *url.URL) ([]*ConnectionManager2, error)

NewConnectionManager2ClientsFromRootDevice discovers instances of the service in a given root device, and returns clients to any that are found. An error is returned if there was not at least one instance of the service within the device. The location parameter is simply assigned to the Location attribute of the wrapped ServiceClient(s).

This is a typical entry calling point into this package when reusing an previously discovered root device.

func (*ConnectionManager2) ConnectionComplete 

func (client *ConnectionManager2) ConnectionComplete(ConnectionID int32) (err error)

func (*ConnectionManager2) GetCurrentConnectionIDs 

func (client *ConnectionManager2) GetCurrentConnectionIDs() (ConnectionIDs string, err error)

func (*ConnectionManager2) GetCurrentConnectionInfo 

func (client *ConnectionManager2) GetCurrentConnectionInfo(ConnectionID int32) (RcsID int32, AVTransportID int32, ProtocolInfo string, PeerConnectionManager string, PeerConnectionID int32, Direction string, Status string, err error)

Return values:

* Direction: allowed values: Input, Output

* Status: allowed values: OK, ContentFormatMismatch, InsufficientBandwidth, UnreliableChannel, Unknown

func (*ConnectionManager2) GetProtocolInfo 

func (client *ConnectionManager2) GetProtocolInfo() (Source string, Sink string, err error)

func (*ConnectionManager2) PrepareForConnection 

func (client *ConnectionManager2) PrepareForConnection(RemoteProtocolInfo string, PeerConnectionManager string, PeerConnectionID int32, Direction string) (ConnectionID int32, AVTransportID int32, RcsID int32, err error)

type ContentDirectory1 

type ContentDirectory1 struct {
	goupnp.ServiceClient
}

ContentDirectory1 is a client for UPnP SOAP service with URN "urn:schemas-upnp-org:service:ContentDirectory:1". See goupnp.ServiceClient, which contains RootDevice and Service attributes which are provided for informational value.

func NewContentDirectory1Clients 

func NewContentDirectory1Clients() (clients []*ContentDirectory1, errors []error, err error)

NewContentDirectory1Clients discovers instances of the service on the network, and returns clients to any that are found. errors will contain an error for any devices that replied but which could not be queried, and err will be set if the discovery process failed outright.

This is a typical entry calling point into this package.

func NewContentDirectory1ClientsByURL 

func NewContentDirectory1ClientsByURL(loc *url.URL) ([]*ContentDirectory1, error)

NewContentDirectory1ClientsByURL discovers instances of the service at the given URL, and returns clients to any that are found. An error is returned if there was an error probing the service.

This is a typical entry calling point into this package when reusing an previously discovered service URL.

func NewContentDirectory1ClientsFromRootDevice 

func NewContentDirectory1ClientsFromRootDevice(rootDevice *goupnp.RootDevice, loc *url.URL) ([]*ContentDirectory1, error)

NewContentDirectory1ClientsFromRootDevice discovers instances of the service in a given root device, and returns clients to any that are found. An error is returned if there was not at least one instance of the service within the device. The location parameter is simply assigned to the Location attribute of the wrapped ServiceClient(s).

This is a typical entry calling point into this package when reusing an previously discovered root device.

func (*ContentDirectory1) Browse 

func (client *ContentDirectory1) Browse(ObjectID string, BrowseFlag string, Filter string, StartingIndex uint32, RequestedCount uint32, SortCriteria string) (Result string, NumberReturned uint32, TotalMatches uint32, UpdateID uint32, err error)

func (*ContentDirectory1) CreateObject 

func (client *ContentDirectory1) CreateObject(ContainerID string, Elements string) (ObjectID string, Result string, err error)

func (*ContentDirectory1) CreateReference 

func (client *ContentDirectory1) CreateReference(ContainerID string, ObjectID string) (NewID string, err error)

func (*ContentDirectory1) DeleteResource 

func (client *ContentDirectory1) DeleteResource(ResourceURI *url.URL) (err error)

func (*ContentDirectory1) DestroyObject 

func (client *ContentDirectory1) DestroyObject(ObjectID string) (err error)

func (*ContentDirectory1) ExportResource 

func (client *ContentDirectory1) ExportResource(SourceURI *url.URL, DestinationURI *url.URL) (TransferID uint32, err error)

func (*ContentDirectory1) GetSearchCapabilities 

func (client *ContentDirectory1) GetSearchCapabilities() (SearchCaps string, err error)

func (*ContentDirectory1) GetSortCapabilities 

func (client *ContentDirectory1) GetSortCapabilities() (SortCaps string, err error)

func (*ContentDirectory1) GetSystemUpdateID 

func (client *ContentDirectory1) GetSystemUpdateID() (Id uint32, err error)

func (*ContentDirectory1) GetTransferProgress 

func (client *ContentDirectory1) GetTransferProgress(TransferID uint32) (TransferStatus string, TransferLength string, TransferTotal string, err error)

Return values:

* TransferStatus: allowed values: COMPLETED, ERROR, IN_PROGRESS, STOPPED

func (*ContentDirectory1) ImportResource 

func (client *ContentDirectory1) ImportResource(SourceURI *url.URL, DestinationURI *url.URL) (TransferID uint32, err error)

func (*ContentDirectory1) Search 

func (client *ContentDirectory1) Search(ContainerID string, SearchCriteria string, Filter string, StartingIndex uint32, RequestedCount uint32, SortCriteria string) (Result string, NumberReturned uint32, TotalMatches uint32, UpdateID uint32, err error)

func (*ContentDirectory1) StopTransferResource 

func (client *ContentDirectory1) StopTransferResource(TransferID uint32) (err error)

func (*ContentDirectory1) UpdateObject 

func (client *ContentDirectory1) UpdateObject(ObjectID string, CurrentTagValue string, NewTagValue string) (err error)

type ContentDirectory2 

type ContentDirectory2 struct {
	goupnp.ServiceClient
}

ContentDirectory2 is a client for UPnP SOAP service with URN "urn:schemas-upnp-org:service:ContentDirectory:2". See goupnp.ServiceClient, which contains RootDevice and Service attributes which are provided for informational value.

func NewContentDirectory2Clients 

func NewContentDirectory2Clients() (clients []*ContentDirectory2, errors []error, err error)

NewContentDirectory2Clients discovers instances of the service on the network, and returns clients to any that are found. errors will contain an error for any devices that replied but which could not be queried, and err will be set if the discovery process failed outright.

This is a typical entry calling point into this package.

func NewContentDirectory2ClientsByURL 

func NewContentDirectory2ClientsByURL(loc *url.URL) ([]*ContentDirectory2, error)

NewContentDirectory2ClientsByURL discovers instances of the service at the given URL, and returns clients to any that are found. An error is returned if there was an error probing the service.

This is a typical entry calling point into this package when reusing an previously discovered service URL.

func NewContentDirectory2ClientsFromRootDevice 

func NewContentDirectory2ClientsFromRootDevice(rootDevice *goupnp.RootDevice, loc *url.URL) ([]*ContentDirectory2, error)

NewContentDirectory2ClientsFromRootDevice discovers instances of the service in a given root device, and returns clients to any that are found. An error is returned if there was not at least one instance of the service within the device. The location parameter is simply assigned to the Location attribute of the wrapped ServiceClient(s).

This is a typical entry calling point into this package when reusing an previously discovered root device.

func (*ContentDirectory2) Browse 

func (client *ContentDirectory2) Browse(ObjectID string, BrowseFlag string, Filter string, StartingIndex uint32, RequestedCount uint32, SortCriteria string) (Result string, NumberReturned uint32, TotalMatches uint32, UpdateID uint32, err error)

func (*ContentDirectory2) CreateObject 

func (client *ContentDirectory2) CreateObject(ContainerID string, Elements string) (ObjectID string, Result string, err error)

func (*ContentDirectory2) CreateReference 

func (client *ContentDirectory2) CreateReference(ContainerID string, ObjectID string) (NewID string, err error)

func (*ContentDirectory2) DeleteResource 

func (client *ContentDirectory2) DeleteResource(ResourceURI *url.URL) (err error)

func (*ContentDirectory2) DestroyObject 

func (client *ContentDirectory2) DestroyObject(ObjectID string) (err error)

func (*ContentDirectory2) ExportResource 

func (client *ContentDirectory2) ExportResource(SourceURI *url.URL, DestinationURI *url.URL) (TransferID uint32, err error)

func (*ContentDirectory2) GetFeatureList 

func (client *ContentDirectory2) GetFeatureList() (FeatureList string, err error)

func (*ContentDirectory2) GetSearchCapabilities 

func (client *ContentDirectory2) GetSearchCapabilities() (SearchCaps string, err error)

func (*ContentDirectory2) GetSortCapabilities 

func (client *ContentDirectory2) GetSortCapabilities() (SortCaps string, err error)

func (*ContentDirectory2) GetSortExtensionCapabilities 

func (client *ContentDirectory2) GetSortExtensionCapabilities() (SortExtensionCaps string, err error)

func (*ContentDirectory2) GetSystemUpdateID 

func (client *ContentDirectory2) GetSystemUpdateID() (Id uint32, err error)

func (*ContentDirectory2) GetTransferProgress 

func (client *ContentDirectory2) GetTransferProgress(TransferID uint32) (TransferStatus string, TransferLength string, TransferTotal string, err error)

Return values:

* TransferStatus: allowed values: COMPLETED, ERROR, IN_PROGRESS, STOPPED

func (*ContentDirectory2) ImportResource 

func (client *ContentDirectory2) ImportResource(SourceURI *url.URL, DestinationURI *url.URL) (TransferID uint32, err error)

func (*ContentDirectory2) MoveObject 

func (client *ContentDirectory2) MoveObject(ObjectID string, NewParentID string) (NewObjectID string, err error)

func (*ContentDirectory2) Search 

func (client *ContentDirectory2) Search(ContainerID string, SearchCriteria string, Filter string, StartingIndex uint32, RequestedCount uint32, SortCriteria string) (Result string, NumberReturned uint32, TotalMatches uint32, UpdateID uint32, err error)

func (*ContentDirectory2) StopTransferResource 

func (client *ContentDirectory2) StopTransferResource(TransferID uint32) (err error)

func (*ContentDirectory2) UpdateObject 

func (client *ContentDirectory2) UpdateObject(ObjectID string, CurrentTagValue string, NewTagValue string) (err error)

type ContentDirectory3 

type ContentDirectory3 struct {
	goupnp.ServiceClient
}

ContentDirectory3 is a client for UPnP SOAP service with URN "urn:schemas-upnp-org:service:ContentDirectory:3". See goupnp.ServiceClient, which contains RootDevice and Service attributes which are provided for informational value.

func NewContentDirectory3Clients 

func NewContentDirectory3Clients() (clients []*ContentDirectory3, errors []error, err error)

NewContentDirectory3Clients discovers instances of the service on the network, and returns clients to any that are found. errors will contain an error for any devices that replied but which could not be queried, and err will be set if the discovery process failed outright.

This is a typical entry calling point into this package.

func NewContentDirectory3ClientsByURL 

func NewContentDirectory3ClientsByURL(loc *url.URL) ([]*ContentDirectory3, error)

NewContentDirectory3ClientsByURL discovers instances of the service at the given URL, and returns clients to any that are found. An error is returned if there was an error probing the service.

This is a typical entry calling point into this package when reusing an previously discovered service URL.

func NewContentDirectory3ClientsFromRootDevice 

func NewContentDirectory3ClientsFromRootDevice(rootDevice *goupnp.RootDevice, loc *url.URL) ([]*ContentDirectory3, error)

NewContentDirectory3ClientsFromRootDevice discovers instances of the service in a given root device, and returns clients to any that are found. An error is returned if there was not at least one instance of the service within the device. The location parameter is simply assigned to the Location attribute of the wrapped ServiceClient(s).

This is a typical entry calling point into this package when reusing an previously discovered root device.

func (*ContentDirectory3) Browse 

func (client *ContentDirectory3) Browse(ObjectID string, BrowseFlag string, Filter string, StartingIndex uint32, RequestedCount uint32, SortCriteria string) (Result string, NumberReturned uint32, TotalMatches uint32, UpdateID uint32, err error)

func (*ContentDirectory3) CreateObject 

func (client *ContentDirectory3) CreateObject(ContainerID string, Elements string) (ObjectID string, Result string, err error)

func (*ContentDirectory3) CreateReference 

func (client *ContentDirectory3) CreateReference(ContainerID string, ObjectID string) (NewID string, err error)

func (*ContentDirectory3) DeleteResource 

func (client *ContentDirectory3) DeleteResource(ResourceURI *url.URL) (err error)

func (*ContentDirectory3) DestroyObject 

func (client *ContentDirectory3) DestroyObject(ObjectID string) (err error)

func (*ContentDirectory3) ExportResource 

func (client *ContentDirectory3) ExportResource(SourceURI *url.URL, DestinationURI *url.URL) (TransferID uint32, err error)

func (*ContentDirectory3) FreeFormQuery 

func (client *ContentDirectory3) FreeFormQuery(ContainerID string, CDSView uint32, QueryRequest string) (QueryResult string, UpdateID uint32, err error)

func (*ContentDirectory3) GetFeatureList 

func (client *ContentDirectory3) GetFeatureList() (FeatureList string, err error)

func (*ContentDirectory3) GetFreeFormQueryCapabilities 

func (client *ContentDirectory3) GetFreeFormQueryCapabilities() (FFQCapabilities string, err error)

func (*ContentDirectory3) GetSearchCapabilities 

func (client *ContentDirectory3) GetSearchCapabilities() (SearchCaps string, err error)

func (*ContentDirectory3) GetServiceResetToken 

func (client *ContentDirectory3) GetServiceResetToken() (ResetToken string, err error)

func (*ContentDirectory3) GetSortCapabilities 

func (client *ContentDirectory3) GetSortCapabilities() (SortCaps string, err error)

func (*ContentDirectory3) GetSortExtensionCapabilities 

func (client *ContentDirectory3) GetSortExtensionCapabilities() (SortExtensionCaps string, err error)

func (*ContentDirectory3) GetSystemUpdateID 

func (client *ContentDirectory3) GetSystemUpdateID() (Id uint32, err error)

func (*ContentDirectory3) GetTransferProgress 

func (client *ContentDirectory3) GetTransferProgress(TransferID uint32) (TransferStatus string, TransferLength string, TransferTotal string, err error)

Return values:

* TransferStatus: allowed values: COMPLETED, ERROR, IN_PROGRESS, STOPPED

func (*ContentDirectory3) ImportResource 

func (client *ContentDirectory3) ImportResource(SourceURI *url.URL, DestinationURI *url.URL) (TransferID uint32, err error)

func (*ContentDirectory3) MoveObject 

func (client *ContentDirectory3) MoveObject(ObjectID string, NewParentID string) (NewObjectID string, err error)

func (*ContentDirectory3) Search 

func (client *ContentDirectory3) Search(ContainerID string, SearchCriteria string, Filter string, StartingIndex uint32, RequestedCount uint32, SortCriteria string) (Result string, NumberReturned uint32, TotalMatches uint32, UpdateID uint32, err error)

func (*ContentDirectory3) StopTransferResource 

func (client *ContentDirectory3) StopTransferResource(TransferID uint32) (err error)

func (*ContentDirectory3) UpdateObject 

func (client *ContentDirectory3) UpdateObject(ObjectID string, CurrentTagValue string, NewTagValue string) (err error)

type RenderingControl1 

type RenderingControl1 struct {
	goupnp.ServiceClient
}

RenderingControl1 is a client for UPnP SOAP service with URN "urn:schemas-upnp-org:service:RenderingControl:1". See goupnp.ServiceClient, which contains RootDevice and Service attributes which are provided for informational value.

func NewRenderingControl1Clients 

func NewRenderingControl1Clients() (clients []*RenderingControl1, errors []error, err error)

NewRenderingControl1Clients discovers instances of the service on the network, and returns clients to any that are found. errors will contain an error for any devices that replied but which could not be queried, and err will be set if the discovery process failed outright.

This is a typical entry calling point into this package.

func NewRenderingControl1ClientsByURL 

func NewRenderingControl1ClientsByURL(loc *url.URL) ([]*RenderingControl1, error)

NewRenderingControl1ClientsByURL discovers instances of the service at the given URL, and returns clients to any that are found. An error is returned if there was an error probing the service.

This is a typical entry calling point into this package when reusing an previously discovered service URL.

func NewRenderingControl1ClientsFromRootDevice 

func NewRenderingControl1ClientsFromRootDevice(rootDevice *goupnp.RootDevice, loc *url.URL) ([]*RenderingControl1, error)

NewRenderingControl1ClientsFromRootDevice discovers instances of the service in a given root device, and returns clients to any that are found. An error is returned if there was not at least one instance of the service within the device. The location parameter is simply assigned to the Location attribute of the wrapped ServiceClient(s).

This is a typical entry calling point into this package when reusing an previously discovered root device.

func (*RenderingControl1) GetBlueVideoBlackLevel 

func (client *RenderingControl1) GetBlueVideoBlackLevel(InstanceID uint32) (CurrentBlueVideoBlackLevel uint16, err error)

Return values:

* CurrentBlueVideoBlackLevel: allowed value range: minimum=0, step=1

func (*RenderingControl1) GetBlueVideoGain 

func (client *RenderingControl1) GetBlueVideoGain(InstanceID uint32) (CurrentBlueVideoGain uint16, err error)

Return values:

* CurrentBlueVideoGain: allowed value range: minimum=0, step=1

func (*RenderingControl1) GetBrightness 

func (client *RenderingControl1) GetBrightness(InstanceID uint32) (CurrentBrightness uint16, err error)

Return values:

* CurrentBrightness: allowed value range: minimum=0, step=1

func (*RenderingControl1) GetColorTemperature 

func (client *RenderingControl1) GetColorTemperature(InstanceID uint32) (CurrentColorTemperature uint16, err error)

Return values:

* CurrentColorTemperature: allowed value range: minimum=0, step=1

func (*RenderingControl1) GetContrast 

func (client *RenderingControl1) GetContrast(InstanceID uint32) (CurrentContrast uint16, err error)

Return values:

* CurrentContrast: allowed value range: minimum=0, step=1

func (*RenderingControl1) GetGreenVideoBlackLevel 

func (client *RenderingControl1) GetGreenVideoBlackLevel(InstanceID uint32) (CurrentGreenVideoBlackLevel uint16, err error)

Return values:

* CurrentGreenVideoBlackLevel: allowed value range: minimum=0, step=1

func (*RenderingControl1) GetGreenVideoGain 

func (client *RenderingControl1) GetGreenVideoGain(InstanceID uint32) (CurrentGreenVideoGain uint16, err error)

Return values:

* CurrentGreenVideoGain: allowed value range: minimum=0, step=1

func (*RenderingControl1) GetHorizontalKeystone 

func (client *RenderingControl1) GetHorizontalKeystone(InstanceID uint32) (CurrentHorizontalKeystone int16, err error)

Return values:

* CurrentHorizontalKeystone: allowed value range: step=1

func (*RenderingControl1) GetLoudness 

func (client *RenderingControl1) GetLoudness(InstanceID uint32, Channel string) (CurrentLoudness bool, err error)

func (*RenderingControl1) GetMute 

func (client *RenderingControl1) GetMute(InstanceID uint32, Channel string) (CurrentMute bool, err error)

func (*RenderingControl1) GetRedVideoBlackLevel 

func (client *RenderingControl1) GetRedVideoBlackLevel(InstanceID uint32) (CurrentRedVideoBlackLevel uint16, err error)

Return values:

* CurrentRedVideoBlackLevel: allowed value range: minimum=0, step=1

func (*RenderingControl1) GetRedVideoGain 

func (client *RenderingControl1) GetRedVideoGain(InstanceID uint32) (CurrentRedVideoGain uint16, err error)

func (*RenderingControl1) GetSharpness 

func (client *RenderingControl1) GetSharpness(InstanceID uint32) (CurrentSharpness uint16, err error)

Return values:

* CurrentSharpness: allowed value range: minimum=0, step=1

func (*RenderingControl1) GetVerticalKeystone 

func (client *RenderingControl1) GetVerticalKeystone(InstanceID uint32) (CurrentVerticalKeystone int16, err error)

Return values:

* CurrentVerticalKeystone: allowed value range: step=1

func (*RenderingControl1) GetVolume 

func (client *RenderingControl1) GetVolume(InstanceID uint32, Channel string) (CurrentVolume uint16, err error)

Return values:

* CurrentVolume: allowed value range: minimum=0, step=1

func (*RenderingControl1) GetVolumeDB 

func (client *RenderingControl1) GetVolumeDB(InstanceID uint32, Channel string) (CurrentVolume int16, err error)

func (*RenderingControl1) GetVolumeDBRange 

func (client *RenderingControl1) GetVolumeDBRange(InstanceID uint32, Channel string) (MinValue int16, MaxValue int16, err error)

func (*RenderingControl1) ListPresets 

func (client *RenderingControl1) ListPresets(InstanceID uint32) (CurrentPresetNameList string, err error)

func (*RenderingControl1) SelectPreset 

func (client *RenderingControl1) SelectPreset(InstanceID uint32, PresetName string) (err error)

func (*RenderingControl1) SetBlueVideoBlackLevel 

func (client *RenderingControl1) SetBlueVideoBlackLevel(InstanceID uint32, DesiredBlueVideoBlackLevel uint16) (err error)

func (*RenderingControl1) SetBlueVideoGain 

func (client *RenderingControl1) SetBlueVideoGain(InstanceID uint32, DesiredBlueVideoGain uint16) (err error)

func (*RenderingControl1) SetBrightness 

func (client *RenderingControl1) SetBrightness(InstanceID uint32, DesiredBrightness uint16) (err error)

func (*RenderingControl1) SetColorTemperature 

func (client *RenderingControl1) SetColorTemperature(InstanceID uint32, DesiredColorTemperature uint16) (err error)

func (*RenderingControl1) SetContrast 

func (client *RenderingControl1) SetContrast(InstanceID uint32, DesiredContrast uint16) (err error)

func (*RenderingControl1) SetGreenVideoBlackLevel 

func (client *RenderingControl1) SetGreenVideoBlackLevel(InstanceID uint32, DesiredGreenVideoBlackLevel uint16) (err error)

func (*RenderingControl1) SetGreenVideoGain 

func (client *RenderingControl1) SetGreenVideoGain(InstanceID uint32, DesiredGreenVideoGain uint16) (err error)

func (*RenderingControl1) SetHorizontalKeystone 

func (client *RenderingControl1) SetHorizontalKeystone(InstanceID uint32, DesiredHorizontalKeystone int16) (err error)

func (*RenderingControl1) SetLoudness 

func (client *RenderingControl1) SetLoudness(InstanceID uint32, Channel string, DesiredLoudness bool) (err error)

func (*RenderingControl1) SetMute 

func (client *RenderingControl1) SetMute(InstanceID uint32, Channel string, DesiredMute bool) (err error)

func (*RenderingControl1) SetRedVideoBlackLevel 

func (client *RenderingControl1) SetRedVideoBlackLevel(InstanceID uint32, DesiredRedVideoBlackLevel uint16) (err error)

func (*RenderingControl1) SetRedVideoGain 

func (client *RenderingControl1) SetRedVideoGain(InstanceID uint32, DesiredRedVideoGain uint16) (err error)

func (*RenderingControl1) SetSharpness 

func (client *RenderingControl1) SetSharpness(InstanceID uint32, DesiredSharpness uint16) (err error)

func (*RenderingControl1) SetVerticalKeystone 

func (client *RenderingControl1) SetVerticalKeystone(InstanceID uint32, DesiredVerticalKeystone int16) (err error)

func (*RenderingControl1) SetVolume 

func (client *RenderingControl1) SetVolume(InstanceID uint32, Channel string, DesiredVolume uint16) (err error)

func (*RenderingControl1) SetVolumeDB 

func (client *RenderingControl1) SetVolumeDB(InstanceID uint32, Channel string, DesiredVolume int16) (err error)

type RenderingControl2 

type RenderingControl2 struct {
	goupnp.ServiceClient
}

RenderingControl2 is a client for UPnP SOAP service with URN "urn:schemas-upnp-org:service:RenderingControl:2". See goupnp.ServiceClient, which contains RootDevice and Service attributes which are provided for informational value.

func NewRenderingControl2Clients 

func NewRenderingControl2Clients() (clients []*RenderingControl2, errors []error, err error)

NewRenderingControl2Clients discovers instances of the service on the network, and returns clients to any that are found. errors will contain an error for any devices that replied but which could not be queried, and err will be set if the discovery process failed outright.

This is a typical entry calling point into this package.

func NewRenderingControl2ClientsByURL 

func NewRenderingControl2ClientsByURL(loc *url.URL) ([]*RenderingControl2, error)

NewRenderingControl2ClientsByURL discovers instances of the service at the given URL, and returns clients to any that are found. An error is returned if there was an error probing the service.

This is a typical entry calling point into this package when reusing an previously discovered service URL.

func NewRenderingControl2ClientsFromRootDevice 

func NewRenderingControl2ClientsFromRootDevice(rootDevice *goupnp.RootDevice, loc *url.URL) ([]*RenderingControl2, error)

NewRenderingControl2ClientsFromRootDevice discovers instances of the service in a given root device, and returns clients to any that are found. An error is returned if there was not at least one instance of the service within the device. The location parameter is simply assigned to the Location attribute of the wrapped ServiceClient(s).

This is a typical entry calling point into this package when reusing an previously discovered root device.

func (*RenderingControl2) GetBlueVideoBlackLevel 

func (client *RenderingControl2) GetBlueVideoBlackLevel(InstanceID uint32) (CurrentBlueVideoBlackLevel uint16, err error)

Return values:

* CurrentBlueVideoBlackLevel: allowed value range: minimum=0, step=1

func (*RenderingControl2) GetBlueVideoGain 

func (client *RenderingControl2) GetBlueVideoGain(InstanceID uint32) (CurrentBlueVideoGain uint16, err error)

Return values:

* CurrentBlueVideoGain: allowed value range: minimum=0, step=1

func (*RenderingControl2) GetBrightness 

func (client *RenderingControl2) GetBrightness(InstanceID uint32) (CurrentBrightness uint16, err error)

Return values:

* CurrentBrightness: allowed value range: minimum=0, step=1

func (*RenderingControl2) GetColorTemperature 

func (client *RenderingControl2) GetColorTemperature(InstanceID uint32) (CurrentColorTemperature uint16, err error)

Return values:

* CurrentColorTemperature: allowed value range: minimum=0, step=1

func (*RenderingControl2) GetContrast 

func (client *RenderingControl2) GetContrast(InstanceID uint32) (CurrentContrast uint16, err error)

Return values:

* CurrentContrast: allowed value range: minimum=0, step=1

func (*RenderingControl2) GetGreenVideoBlackLevel 

func (client *RenderingControl2) GetGreenVideoBlackLevel(InstanceID uint32) (CurrentGreenVideoBlackLevel uint16, err error)

Return values:

* CurrentGreenVideoBlackLevel: allowed value range: minimum=0, step=1

func (*RenderingControl2) GetGreenVideoGain 

func (client *RenderingControl2) GetGreenVideoGain(InstanceID uint32) (CurrentGreenVideoGain uint16, err error)

Return values:

* CurrentGreenVideoGain: allowed value range: minimum=0, step=1

func (*RenderingControl2) GetHorizontalKeystone 

func (client *RenderingControl2) GetHorizontalKeystone(InstanceID uint32) (CurrentHorizontalKeystone int16, err error)

Return values:

* CurrentHorizontalKeystone: allowed value range: step=1

func (*RenderingControl2) GetLoudness 

func (client *RenderingControl2) GetLoudness(InstanceID uint32, Channel string) (CurrentLoudness bool, err error)

func (*RenderingControl2) GetMute 

func (client *RenderingControl2) GetMute(InstanceID uint32, Channel string) (CurrentMute bool, err error)

func (*RenderingControl2) GetRedVideoBlackLevel 

func (client *RenderingControl2) GetRedVideoBlackLevel(InstanceID uint32) (CurrentRedVideoBlackLevel uint16, err error)

Return values:

* CurrentRedVideoBlackLevel: allowed value range: minimum=0, step=1

func (*RenderingControl2) GetRedVideoGain 

func (client *RenderingControl2) GetRedVideoGain(InstanceID uint32) (CurrentRedVideoGain uint16, err error)

Return values:

* CurrentRedVideoGain: allowed value range: minimum=0, step=1

func (*RenderingControl2) GetSharpness 

func (client *RenderingControl2) GetSharpness(InstanceID uint32) (CurrentSharpness uint16, err error)

Return values:

* CurrentSharpness: allowed value range: minimum=0, step=1

func (*RenderingControl2) GetStateVariables 

func (client *RenderingControl2) GetStateVariables(InstanceID uint32, StateVariableList string) (StateVariableValuePairs string, err error)

func (*RenderingControl2) GetVerticalKeystone 

func (client *RenderingControl2) GetVerticalKeystone(InstanceID uint32) (CurrentVerticalKeystone int16, err error)

Return values:

* CurrentVerticalKeystone: allowed value range: step=1

func (*RenderingControl2) GetVolume 

func (client *RenderingControl2) GetVolume(InstanceID uint32, Channel string) (CurrentVolume uint16, err error)

Return values:

* CurrentVolume: allowed value range: minimum=0, step=1

func (*RenderingControl2) GetVolumeDB 

func (client *RenderingControl2) GetVolumeDB(InstanceID uint32, Channel string) (CurrentVolume int16, err error)

func (*RenderingControl2) GetVolumeDBRange 

func (client *RenderingControl2) GetVolumeDBRange(InstanceID uint32, Channel string) (MinValue int16, MaxValue int16, err error)

func (*RenderingControl2) ListPresets 

func (client *RenderingControl2) ListPresets(InstanceID uint32) (CurrentPresetNameList string, err error)

func (*RenderingControl2) SelectPreset 

func (client *RenderingControl2) SelectPreset(InstanceID uint32, PresetName string) (err error)

func (*RenderingControl2) SetBlueVideoBlackLevel 

func (client *RenderingControl2) SetBlueVideoBlackLevel(InstanceID uint32, DesiredBlueVideoBlackLevel uint16) (err error)

func (*RenderingControl2) SetBlueVideoGain 

func (client *RenderingControl2) SetBlueVideoGain(InstanceID uint32, DesiredBlueVideoGain uint16) (err error)

func (*RenderingControl2) SetBrightness 

func (client *RenderingControl2) SetBrightness(InstanceID uint32, DesiredBrightness uint16) (err error)

func (*RenderingControl2) SetColorTemperature 

func (client *RenderingControl2) SetColorTemperature(InstanceID uint32, DesiredColorTemperature uint16) (err error)

func (*RenderingControl2) SetContrast 

func (client *RenderingControl2) SetContrast(InstanceID uint32, DesiredContrast uint16) (err error)

func (*RenderingControl2) SetGreenVideoBlackLevel 

func (client *RenderingControl2) SetGreenVideoBlackLevel(InstanceID uint32, DesiredGreenVideoBlackLevel uint16) (err error)

func (*RenderingControl2) SetGreenVideoGain 

func (client *RenderingControl2) SetGreenVideoGain(InstanceID uint32, DesiredGreenVideoGain uint16) (err error)

func (*RenderingControl2) SetHorizontalKeystone 

func (client *RenderingControl2) SetHorizontalKeystone(InstanceID uint32, DesiredHorizontalKeystone int16) (err error)

func (*RenderingControl2) SetLoudness 

func (client *RenderingControl2) SetLoudness(InstanceID uint32, Channel string, DesiredLoudness bool) (err error)

func (*RenderingControl2) SetMute 

func (client *RenderingControl2) SetMute(InstanceID uint32, Channel string, DesiredMute bool) (err error)

func (*RenderingControl2) SetRedVideoBlackLevel 

func (client *RenderingControl2) SetRedVideoBlackLevel(InstanceID uint32, DesiredRedVideoBlackLevel uint16) (err error)

func (*RenderingControl2) SetRedVideoGain 

func (client *RenderingControl2) SetRedVideoGain(InstanceID uint32, DesiredRedVideoGain uint16) (err error)

func (*RenderingControl2) SetSharpness 

func (client *RenderingControl2) SetSharpness(InstanceID uint32, DesiredSharpness uint16) (err error)

func (*RenderingControl2) SetStateVariables 

func (client *RenderingControl2) SetStateVariables(InstanceID uint32, RenderingControlUDN string, ServiceType string, ServiceId string, StateVariableValuePairs string) (StateVariableList string, err error)

func (*RenderingControl2) SetVerticalKeystone 

func (client *RenderingControl2) SetVerticalKeystone(InstanceID uint32, DesiredVerticalKeystone int16) (err error)

func (*RenderingControl2) SetVolume 

func (client *RenderingControl2) SetVolume(InstanceID uint32, Channel string, DesiredVolume uint16) (err error)

func (*RenderingControl2) SetVolumeDB 

func (client *RenderingControl2) SetVolumeDB(InstanceID uint32, Channel string, DesiredVolume int16) (err error)

type ScheduledRecording1 

type ScheduledRecording1 struct {
	goupnp.ServiceClient
}

ScheduledRecording1 is a client for UPnP SOAP service with URN "urn:schemas-upnp-org:service:ScheduledRecording:1". See goupnp.ServiceClient, which contains RootDevice and Service attributes which are provided for informational value.

func NewScheduledRecording1Clients 

func NewScheduledRecording1Clients() (clients []*ScheduledRecording1, errors []error, err error)

NewScheduledRecording1Clients discovers instances of the service on the network, and returns clients to any that are found. errors will contain an error for any devices that replied but which could not be queried, and err will be set if the discovery process failed outright.

This is a typical entry calling point into this package.

func NewScheduledRecording1ClientsByURL 

func NewScheduledRecording1ClientsByURL(loc *url.URL) ([]*ScheduledRecording1, error)

NewScheduledRecording1ClientsByURL discovers instances of the service at the given URL, and returns clients to any that are found. An error is returned if there was an error probing the service.

This is a typical entry calling point into this package when reusing an previously discovered service URL.

func NewScheduledRecording1ClientsFromRootDevice 

func NewScheduledRecording1ClientsFromRootDevice(rootDevice *goupnp.RootDevice, loc *url.URL) ([]*ScheduledRecording1, error)

NewScheduledRecording1ClientsFromRootDevice discovers instances of the service in a given root device, and returns clients to any that are found. An error is returned if there was not at least one instance of the service within the device. The location parameter is simply assigned to the Location attribute of the wrapped ServiceClient(s).

This is a typical entry calling point into this package when reusing an previously discovered root device.

func (*ScheduledRecording1) BrowseRecordSchedules 

func (client *ScheduledRecording1) BrowseRecordSchedules(Filter string, StartingIndex uint32, RequestedCount uint32, SortCriteria string) (Result string, NumberReturned uint32, TotalMatches uint32, UpdateID uint32, err error)

func (*ScheduledRecording1) BrowseRecordTasks 

func (client *ScheduledRecording1) BrowseRecordTasks(RecordScheduleID string, Filter string, StartingIndex uint32, RequestedCount uint32, SortCriteria string) (Result string, NumberReturned uint32, TotalMatches uint32, UpdateID uint32, err error)

func (*ScheduledRecording1) CreateRecordSchedule 

func (client *ScheduledRecording1) CreateRecordSchedule(Elements string) (RecordScheduleID string, Result string, UpdateID uint32, err error)

func (*ScheduledRecording1) DeleteRecordSchedule 

func (client *ScheduledRecording1) DeleteRecordSchedule(RecordScheduleID string) (err error)

func (*ScheduledRecording1) DeleteRecordTask 

func (client *ScheduledRecording1) DeleteRecordTask(RecordTaskID string) (err error)

func (*ScheduledRecording1) DisableRecordSchedule 

func (client *ScheduledRecording1) DisableRecordSchedule(RecordScheduleID string) (err error)

func (*ScheduledRecording1) DisableRecordTask 

func (client *ScheduledRecording1) DisableRecordTask(RecordTaskID string) (err error)

func (*ScheduledRecording1) EnableRecordSchedule 

func (client *ScheduledRecording1) EnableRecordSchedule(RecordScheduleID string) (err error)

func (*ScheduledRecording1) EnableRecordTask 

func (client *ScheduledRecording1) EnableRecordTask(RecordTaskID string) (err error)

func (*ScheduledRecording1) GetAllowedValues 

func (client *ScheduledRecording1) GetAllowedValues(DataTypeID string, Filter string) (PropertyInfo string, err error)

func (*ScheduledRecording1) GetPropertyList 

func (client *ScheduledRecording1) GetPropertyList(DataTypeID string) (PropertyList string, err error)

func (*ScheduledRecording1) GetRecordSchedule 

func (client *ScheduledRecording1) GetRecordSchedule(RecordScheduleID string, Filter string) (Result string, UpdateID uint32, err error)

func (*ScheduledRecording1) GetRecordScheduleConflicts 

func (client *ScheduledRecording1) GetRecordScheduleConflicts(RecordScheduleID string) (RecordScheduleConflictIDList string, UpdateID uint32, err error)

func (*ScheduledRecording1) GetRecordTask 

func (client *ScheduledRecording1) GetRecordTask(RecordTaskID string, Filter string) (Result string, UpdateID uint32, err error)

func (*ScheduledRecording1) GetRecordTaskConflicts 

func (client *ScheduledRecording1) GetRecordTaskConflicts(RecordTaskID string) (RecordTaskConflictIDList string, UpdateID uint32, err error)

func (*ScheduledRecording1) GetSortCapabilities 

func (client *ScheduledRecording1) GetSortCapabilities() (SortCaps string, SortLevelCap uint32, err error)

func (*ScheduledRecording1) GetStateUpdateID 

func (client *ScheduledRecording1) GetStateUpdateID() (Id uint32, err error)

func (*ScheduledRecording1) ResetRecordTask 

func (client *ScheduledRecording1) ResetRecordTask(RecordTaskID string) (err error)

type ScheduledRecording2 

type ScheduledRecording2 struct {
	goupnp.ServiceClient
}

ScheduledRecording2 is a client for UPnP SOAP service with URN "urn:schemas-upnp-org:service:ScheduledRecording:2". See goupnp.ServiceClient, which contains RootDevice and Service attributes which are provided for informational value.

func NewScheduledRecording2Clients 

func NewScheduledRecording2Clients() (clients []*ScheduledRecording2, errors []error, err error)

NewScheduledRecording2Clients discovers instances of the service on the network, and returns clients to any that are found. errors will contain an error for any devices that replied but which could not be queried, and err will be set if the discovery process failed outright.

This is a typical entry calling point into this package.

func NewScheduledRecording2ClientsByURL 

func NewScheduledRecording2ClientsByURL(loc *url.URL) ([]*ScheduledRecording2, error)

NewScheduledRecording2ClientsByURL discovers instances of the service at the given URL, and returns clients to any that are found. An error is returned if there was an error probing the service.

This is a typical entry calling point into this package when reusing an previously discovered service URL.

func NewScheduledRecording2ClientsFromRootDevice 

func NewScheduledRecording2ClientsFromRootDevice(rootDevice *goupnp.RootDevice, loc *url.URL) ([]*ScheduledRecording2, error)

NewScheduledRecording2ClientsFromRootDevice discovers instances of the service in a given root device, and returns clients to any that are found. An error is returned if there was not at least one instance of the service within the device. The location parameter is simply assigned to the Location attribute of the wrapped ServiceClient(s).

This is a typical entry calling point into this package when reusing an previously discovered root device.

func (*ScheduledRecording2) BrowseRecordSchedules 

func (client *ScheduledRecording2) BrowseRecordSchedules(Filter string, StartingIndex uint32, RequestedCount uint32, SortCriteria string) (Result string, NumberReturned uint32, TotalMatches uint32, UpdateID uint32, err error)

func (*ScheduledRecording2) BrowseRecordTasks 

func (client *ScheduledRecording2) BrowseRecordTasks(RecordScheduleID string, Filter string, StartingIndex uint32, RequestedCount uint32, SortCriteria string) (Result string, NumberReturned uint32, TotalMatches uint32, UpdateID uint32, err error)

func (*ScheduledRecording2) CreateRecordSchedule 

func (client *ScheduledRecording2) CreateRecordSchedule(Elements string) (RecordScheduleID string, Result string, UpdateID uint32, err error)

func (*ScheduledRecording2) DeleteRecordSchedule 

func (client *ScheduledRecording2) DeleteRecordSchedule(RecordScheduleID string) (err error)

func (*ScheduledRecording2) DeleteRecordTask 

func (client *ScheduledRecording2) DeleteRecordTask(RecordTaskID string) (err error)

func (*ScheduledRecording2) DisableRecordSchedule 

func (client *ScheduledRecording2) DisableRecordSchedule(RecordScheduleID string) (err error)

func (*ScheduledRecording2) DisableRecordTask 

func (client *ScheduledRecording2) DisableRecordTask(RecordTaskID string) (err error)

func (*ScheduledRecording2) EnableRecordSchedule 

func (client *ScheduledRecording2) EnableRecordSchedule(RecordScheduleID string) (err error)

func (*ScheduledRecording2) EnableRecordTask 

func (client *ScheduledRecording2) EnableRecordTask(RecordTaskID string) (err error)

func (*ScheduledRecording2) GetAllowedValues 

func (client *ScheduledRecording2) GetAllowedValues(DataTypeID string, Filter string) (PropertyInfo string, err error)

func (*ScheduledRecording2) GetPropertyList 

func (client *ScheduledRecording2) GetPropertyList(DataTypeID string) (PropertyList string, err error)

func (*ScheduledRecording2) GetRecordSchedule 

func (client *ScheduledRecording2) GetRecordSchedule(RecordScheduleID string, Filter string) (Result string, UpdateID uint32, err error)

func (*ScheduledRecording2) GetRecordScheduleConflicts 

func (client *ScheduledRecording2) GetRecordScheduleConflicts(RecordScheduleID string) (RecordScheduleConflictIDList string, UpdateID uint32, err error)

func (*ScheduledRecording2) GetRecordTask 

func (client *ScheduledRecording2) GetRecordTask(RecordTaskID string, Filter string) (Result string, UpdateID uint32, err error)

func (*ScheduledRecording2) GetRecordTaskConflicts 

func (client *ScheduledRecording2) GetRecordTaskConflicts(RecordTaskID string) (RecordTaskConflictIDList string, UpdateID uint32, err error)

func (*ScheduledRecording2) GetSortCapabilities 

func (client *ScheduledRecording2) GetSortCapabilities() (SortCaps string, SortLevelCap uint32, err error)

func (*ScheduledRecording2) GetStateUpdateID 

func (client *ScheduledRecording2) GetStateUpdateID() (Id uint32, err error)

func (*ScheduledRecording2) ResetRecordTask 

func (client *ScheduledRecording2) ResetRecordTask(RecordTaskID string) (err error)

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.