framework

package
v1.16.3 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Nov 9, 2022 License: Apache-2.0 Imports: 103 Imported by: 0

Documentation

Overview

Package framework contains provider-independent helper code for building and running E2E tests with Ginkgo. The actual Ginkgo test suites gets assembled by combining this framework, the optional provider support code and specific tests via a separate .go file like Kubernetes' test/e2e.go.

Index

Constants

View Source 
const (
	// EndpointHTTPPort is an endpoint HTTP port for testing.
	EndpointHTTPPort = 8080
	// EndpointUDPPort is an endpoint UDP port for testing.
	EndpointUDPPort = 8081

	// ClusterHTTPPort is a cluster HTTP port for testing.
	ClusterHTTPPort = 80
	// ClusterUDPPort is a cluster UDP port for testing.
	ClusterUDPPort = 90

	// SessionAffinityChecks is number of checks to hit a given set of endpoints when enable session affinity.
	SessionAffinityChecks = 10
	// RegexIPv4 is a regex to match IPv4 addresses
	RegexIPv4 = "(?:\\d+)\\.(?:\\d+)\\.(?:\\d+)\\.(?:\\d+)"
	// RegexIPv6 is a regex to match IPv6 addresses
	RegexIPv6 = "" /* 1910-byte string literal not displayed */
)
View Source 
const (
	// PodListTimeout is how long to wait for the pod to be listable.
	PodListTimeout = time.Minute
	// PodStartTimeout is how long to wait for the pod to be started.
	// Initial pod start can be delayed O(minutes) by slow docker pulls.
	// TODO: Make this 30 seconds once #4566 is resolved.
	PodStartTimeout = 5 * time.Minute

	// PodStartShortTimeout is same as `PodStartTimeout` to wait for the pod to be started, but shorter.
	// Use it case by case when we are sure pod start will not be delayed.
	// minutes by slow docker pulls or something else.
	PodStartShortTimeout = 2 * time.Minute

	// PodDeleteTimeout is how long to wait for a pod to be deleted.
	PodDeleteTimeout = 5 * time.Minute

	// PodEventTimeout is how much we wait for a pod event to occur.
	PodEventTimeout = 2 * time.Minute

	// NamespaceCleanupTimeout is how long to wait for the namespace to be deleted.
	// If there are any orphaned namespaces to clean up, this test is running
	// on a long lived cluster. A long wait here is preferably to spurious test
	// failures caused by leaked resources from a previous test run.
	NamespaceCleanupTimeout = 15 * time.Minute

	// ServiceStartTimeout is how long to wait for a service endpoint to be resolvable.
	ServiceStartTimeout = 3 * time.Minute

	// Poll is how often to Poll pods, nodes and claims.
	Poll = 2 * time.Second

	// PollShortTimeout is the short timeout value in polling.
	PollShortTimeout = 1 * time.Minute

	// ServiceAccountProvisionTimeout is how long to wait for a service account to be provisioned.
	// service accounts are provisioned after namespace creation
	// a service account is required to support pod creation in a namespace as part of admission control
	ServiceAccountProvisionTimeout = 2 * time.Minute

	// SingleCallTimeout is how long to try single API calls (like 'get' or 'list'). Used to prevent
	// transient failures from failing tests.
	// TODO: client should not apply this timeout to Watch calls. Increased from 30s until that is fixed.
	SingleCallTimeout = 5 * time.Minute

	// NodeReadyInitialTimeout is how long nodes have to be "ready" when a test begins. They should already
	// be "ready" before the test starts, so this is small.
	NodeReadyInitialTimeout = 20 * time.Second

	// PodReadyBeforeTimeout is how long pods have to be "ready" when a test begins.
	PodReadyBeforeTimeout = 5 * time.Minute

	// ClaimProvisionTimeout is how long claims have to become dynamically provisioned.
	ClaimProvisionTimeout = 5 * time.Minute

	// ClaimProvisionShortTimeout is same as `ClaimProvisionTimeout` to wait for claim to be dynamically provisioned, but shorter.
	// Use it case by case when we are sure this timeout is enough.
	ClaimProvisionShortTimeout = 1 * time.Minute

	// ClaimBindingTimeout is how long claims have to become bound.
	ClaimBindingTimeout = 3 * time.Minute

	// ClaimDeletingTimeout is How long claims have to become deleted.
	ClaimDeletingTimeout = 3 * time.Minute

	// PVReclaimingTimeout is how long PVs have to beome reclaimed.
	PVReclaimingTimeout = 3 * time.Minute

	// PVBindingTimeout is how long PVs have to become bound.
	PVBindingTimeout = 3 * time.Minute

	// PVDeletingTimeout is how long PVs have to become deleted.
	PVDeletingTimeout = 3 * time.Minute

	// RecreateNodeReadyAgainTimeout is how long a node is allowed to become "Ready" after it is recreated before
	// the test is considered failed.
	RecreateNodeReadyAgainTimeout = 10 * time.Minute

	// RestartNodeReadyAgainTimeout is how long a node is allowed to become "Ready" after it is restarted before
	// the test is considered failed.
	RestartNodeReadyAgainTimeout = 5 * time.Minute

	// RestartPodReadyAgainTimeout is how long a pod is allowed to become "running" and "ready" after a node
	// restart before test is considered failed.
	RestartPodReadyAgainTimeout = 5 * time.Minute

	// SnapshotCreateTimeout is how long for snapshot to create snapshotContent.
	SnapshotCreateTimeout = 5 * time.Minute
)
View Source 
const (
	// DefaultCPUProfileSeconds is default value for how long the CPU profile is gathered for.
	DefaultCPUProfileSeconds = 30
)
View Source 
const (

	// DefaultNamespaceDeletionTimeout is timeout duration for waiting for a namespace deletion.
	// TODO(mikedanese): reset this to 5 minutes once #47135 is resolved.
	// ref https://github.com/kubernetes/kubernetes/issues/47135
	DefaultNamespaceDeletionTimeout = 10 * time.Minute
)
View Source 
const (

	// DefaultNumNodes is the number of nodes. If not specified, then number of nodes is auto-detected
	DefaultNumNodes = -1
)
View Source 
const DefaultPodDeletionTimeout = 3 * time.Minute

DefaultPodDeletionTimeout is the default timeout for deleting pod

View Source 
const NoCPUConstraint = math.MaxFloat64

NoCPUConstraint is the number of constraint for CPU.

View Source 
const (

	// VolumeSelectorKey is the key for volume selector.
	VolumeSelectorKey = "e2e-pv-pool"
)

Variables

View Source 
var (
	// BusyBoxImage is the image URI of BusyBox.
	BusyBoxImage = imageutils.GetE2EImage(imageutils.BusyBox)

	// AgnHostImage is the image URI of AgnHost
	AgnHostImage = imageutils.GetE2EImage(imageutils.Agnhost)

	// ServeHostnameImage is a serve hostname image name.
	ServeHostnameImage = imageutils.GetE2EImage(imageutils.Agnhost)
)
View Source 
var ImageWhiteList sets.String

ImageWhiteList is the images used in the current test suite. It should be initialized in test suite and the images in the white list should be pre-pulled in the test suite. Currently, this is only used by node e2e test.

View Source 
var NetexecImageName = imageutils.GetE2EImage(imageutils.Agnhost)

NetexecImageName is the image name for agnhost.

View Source 
var ProvidersWithSSH = []string{"gce", "gke", "aws", "local"}

ProvidersWithSSH are those providers where each node is accessible with SSH

View Source 
var RunID = uuid.NewUUID()

RunID is a unique identifier of the e2e run. Beware that this ID is not the same for all tests in the e2e run, because each Ginkgo node creates it separately.

View Source 
var (
	// SELinuxLabel is common selinux labels.
	SELinuxLabel = &v1.SELinuxOptions{
		Level: "s0:c0,c1"}
)

Functions

func AddOrUpdateAvoidPodOnNode 

func AddOrUpdateAvoidPodOnNode(c clientset.Interface, nodeName string, avoidPods v1.AvoidPods)

AddOrUpdateAvoidPodOnNode adds avoidPods annotations to node, will override if it exists

func AddOrUpdateLabelOnNode 

func AddOrUpdateLabelOnNode(c clientset.Interface, nodeName string, labelKey, labelValue string)

AddOrUpdateLabelOnNode adds the given label key and value to the given node or updates value.

func AddOrUpdateLabelOnNodeAndReturnOldValue 

func AddOrUpdateLabelOnNodeAndReturnOldValue(c clientset.Interface, nodeName string, labelKey, labelValue string) string

AddOrUpdateLabelOnNodeAndReturnOldValue adds the given label key and value to the given node or updates value and returns the old label value.

func AddOrUpdateTaintOnNode 

func AddOrUpdateTaintOnNode(c clientset.Interface, nodeName string, taint v1.Taint)

AddOrUpdateTaintOnNode adds the given taint to the given node or updates taint.

func AfterReadingAllFlags 

func AfterReadingAllFlags(t *TestContextType)

AfterReadingAllFlags makes changes to the context after all flags have been read.

func AfterSuiteActions 

func AfterSuiteActions()

AfterSuiteActions are actions that are run on ginkgo's SynchronizedAfterSuite

func AllNodesReady 

func AllNodesReady(c clientset.Interface, timeout time.Duration) error

AllNodesReady checks whether all registered nodes are ready. TODO: we should change the AllNodesReady call in AfterEach to WaitForAllNodesHealthy, and figure out how to do it in a configurable way, as we can't expect all setups to run default test add-ons.

func AssertCleanup 

func AssertCleanup(ns string, selectors ...string)

AssertCleanup asserts that cleanup of a namespace wrt selectors occurred.

func BlockNetwork 

func BlockNetwork(from string, to string)

BlockNetwork blocks network between the given from value and the given to value. The following helper functions can block/unblock network from source host to destination host by manipulating iptable rules. This function assumes it can ssh to the source host.

Caution: Recommend to input IP instead of hostnames. Using hostnames will cause iptables to do a DNS lookup to resolve the name to an IP address, which will slow down the test and cause it to fail if DNS is absent or broken.

Suggested usage pattern: 

func foo() {
	...
	defer UnblockNetwork(from, to)
	BlockNetwork(from, to)
	...
}

func CheckConnectivityToHost 

func CheckConnectivityToHost(f *Framework, nodeName, podName, host string, port, timeout int) error

CheckConnectivityToHost launches a pod to test connectivity to the specified host. An error will be returned if the host is not reachable from the pod.

An empty nodeName will use the schedule to choose where the pod is executed.

func CheckForControllerManagerHealthy 

func CheckForControllerManagerHealthy(duration time.Duration) error

CheckForControllerManagerHealthy checks that the controller manager does not crash within "duration"

func CheckInvariants 

func CheckInvariants(events []watch.Event, fns ...InvariantFunc) error

CheckInvariants checks for invariant of the each events.

func CheckReachabilityFromPod 

func CheckReachabilityFromPod(expectToBeReachable bool, timeout time.Duration, namespace, pod, target string)

CheckReachabilityFromPod checks reachability from the specified pod.

func CheckTestingNSDeletedExcept 

func CheckTestingNSDeletedExcept(c clientset.Interface, skip string) error

CheckTestingNSDeletedExcept checks whether all e2e based existing namespaces are in the Terminating state and waits until they are finally deleted. It ignores namespace skip.

func Cleanup 

func Cleanup(filePath, ns string, selectors ...string)

Cleanup stops everything from filePath from namespace ns and checks if everything matching selectors from the given namespace is correctly stopped.

func CleanupSuite 

func CleanupSuite()

CleanupSuite is the boilerplate that can be used after tests on ginkgo were run, on the SynchronizedAfterSuite step. Similar to SynchronizedBeforeSuite, we want to run some operations only once (such as collecting cluster logs). Here, the order of functions is reversed; first, the function which runs everywhere, and then the function that only runs on the first Ginkgo node.

func ClusterIsIPv6 

func ClusterIsIPv6() bool

ClusterIsIPv6 returns true if the cluster is IPv6

func ConformanceIt 

func ConformanceIt(text string, body interface{}, timeout ...float64) bool

ConformanceIt is wrapper function for ginkgo It. Adds "[Conformance]" tag and makes static analysis easier.

func ContainerInitInvariant 

func ContainerInitInvariant(older, newer runtime.Object) error

ContainerInitInvariant checks for an init containers are initialized and invariant on both older and newer.

func CoreDump 

func CoreDump(dir string)

CoreDump SSHs to the master and all nodes and dumps their logs into dir. It shells out to cluster/log-dump/log-dump.sh to accomplish this.

func CreateEmptyFileOnPod 

func CreateEmptyFileOnPod(namespace string, podName string, filePath string) error

CreateEmptyFileOnPod creates empty file at given path on the pod. TODO(alejandrox1): move to subpkg pod once kubectl methods have been refactored.

func CreateManagedInstanceGroup 

func CreateManagedInstanceGroup(size int64, zone, template string) error

CreateManagedInstanceGroup creates a Compute Engine managed instance group.

func CreatePDWithRetry 

func CreatePDWithRetry() (string, error)

CreatePDWithRetry creates PD with retry.

func CreatePDWithRetryAndZone 

func CreatePDWithRetryAndZone(zone string) (string, error)

CreatePDWithRetryAndZone creates PD on zone with retry.

func CreatePV 

func CreatePV(c clientset.Interface, pv *v1.PersistentVolume) (*v1.PersistentVolume, error)

CreatePV creates the PV resource. Fails test on error.

func CreatePVC 

func CreatePVC(c clientset.Interface, ns string, pvc *v1.PersistentVolumeClaim) (*v1.PersistentVolumeClaim, error)

CreatePVC creates the PVC resource. Fails test on error.

func CreatePVCPV 

func CreatePVCPV(c clientset.Interface, pvConfig PersistentVolumeConfig, pvcConfig PersistentVolumeClaimConfig, ns string, preBind bool) (*v1.PersistentVolume, *v1.PersistentVolumeClaim, error)

CreatePVCPV creates a PVC followed by the PV based on the passed in nfs-server ip and namespace. If the "preBind" bool is true then pre-bind the PV to the PVC via the PV's ClaimRef. Return the pv and pvc to reflect the created objects. Note: in the pre-bind case the real PVC name, which is generated, is not 

known until after the PVC is instantiated. This is why the pvc is created
before the pv.

func CreatePVPVC 

func CreatePVPVC(c clientset.Interface, pvConfig PersistentVolumeConfig, pvcConfig PersistentVolumeClaimConfig, ns string, preBind bool) (*v1.PersistentVolume, *v1.PersistentVolumeClaim, error)

CreatePVPVC creates a PV followed by the PVC based on the passed in nfs-server ip and namespace. If the "preBind" bool is true then pre-bind the PVC to the PV via the PVC's VolumeName. Return the pv and pvc to reflect the created objects. Note: in the pre-bind case the real PV name, which is generated, is not 

known until after the PV is instantiated. This is why the pv is created
before the pvc.

func CreatePVSource 

func CreatePVSource(zone string) (*v1.PersistentVolumeSource, error)

CreatePVSource creates a PV source.

func CreatePVsPVCs 

func CreatePVsPVCs(numpvs, numpvcs int, c clientset.Interface, ns string, pvConfig PersistentVolumeConfig, pvcConfig PersistentVolumeClaimConfig) (PVMap, PVCMap, error)

CreatePVsPVCs creates the desired number of PVs and PVCs and returns them in separate maps. If the number of PVs != the number of PVCs then the min of those two counts is the number of PVs expected to bind. If a Create error occurs, the returned maps may contain pv and pvc entries for the resources that were successfully created. In other words, when the caller sees an error returned, it needs to decide what to do about entries in the maps. Note: when the test suite deletes the namespace orphaned pvcs and pods are deleted. However, 

orphaned pvs are not deleted and will remain after the suite completes.

func CreateTestingNS 

func CreateTestingNS(baseName string, c clientset.Interface, labels map[string]string) (*v1.Namespace, error)

CreateTestingNS should be used by every test, note that we append a common prefix to the provided test name. Please see NewFramework instead of using this directly.

func DeleteManagedInstanceGroup 

func DeleteManagedInstanceGroup(zone string) error

DeleteManagedInstanceGroup deletes Google Compute Engine managed instance group.

func DeleteNamespaces 

func DeleteNamespaces(c clientset.Interface, deleteFilter, skipFilter []string) ([]string, error)

DeleteNamespaces deletes all namespaces that match the given delete and skip filters. Filter is by simple strings.Contains; first skip filter, then delete filter. Returns the list of deleted namespaces or an error.

func DeleteNodeOnCloudProvider 

func DeleteNodeOnCloudProvider(node *v1.Node) error

DeleteNodeOnCloudProvider deletes the specified node.

func DeletePDWithRetry 

func DeletePDWithRetry(diskName string) error

DeletePDWithRetry deletes PD with retry.

func DeletePVCandValidatePV 

func DeletePVCandValidatePV(c clientset.Interface, ns string, pvc *v1.PersistentVolumeClaim, pv *v1.PersistentVolume, expectPVPhase v1.PersistentVolumePhase) error

DeletePVCandValidatePV deletes the PVC and waits for the PV to enter its expected phase. Validate that the PV has been reclaimed (assumption here about reclaimPolicy). Caller tells this func which phase value to expect for the pv bound to the to-be-deleted claim.

func DeletePVCandValidatePVGroup 

func DeletePVCandValidatePVGroup(c clientset.Interface, ns string, pvols PVMap, claims PVCMap, expectPVPhase v1.PersistentVolumePhase) error

DeletePVCandValidatePVGroup wraps deletePVCandValidatePV() by calling the function in a loop over the PV map. Only bound PVs are deleted. Validates that the claim was deleted and the PV is in the expected Phase (Released, Available, Bound). Note: if there are more claims than pvs then some of the remaining claims may bind to just made 

available pvs.

func DeletePVSource 

func DeletePVSource(pvSource *v1.PersistentVolumeSource) error

DeletePVSource deletes a PV source.

func DeletePersistentVolume 

func DeletePersistentVolume(c clientset.Interface, pvName string) error

DeletePersistentVolume deletes the PV.

func DeletePersistentVolumeClaim 

func DeletePersistentVolumeClaim(c clientset.Interface, pvcName string, ns string) error

DeletePersistentVolumeClaim deletes the Claim.

func DeleteRCAndWaitForGC 

func DeleteRCAndWaitForGC(c clientset.Interface, ns, name string) error

DeleteRCAndWaitForGC deletes only the Replication Controller and waits for GC to delete the pods.

func DeleteResourceAndWaitForGC 

func DeleteResourceAndWaitForGC(c clientset.Interface, kind schema.GroupKind, ns, name string) error

DeleteResourceAndWaitForGC deletes only given resource and waits for GC to delete the pods.

func DescribeIng 

func DescribeIng(ns string)

DescribeIng describes information of ingress by running kubectl describe ing.

func DescribeItem 

func DescribeItem(item interface{}) string

DescribeItem always returns a string that describes the item, usually by calling out to cache.MetaNamespaceKeyFunc which concatenates namespace (if set) and name. If that fails, the entire item gets converted to a string.

func DsFromManifest 

func DsFromManifest(url string) (*appsv1.DaemonSet, error)

DsFromManifest reads a .json/yaml file and returns the daemonset in it.

func DumpAllNamespaceInfo 

func DumpAllNamespaceInfo(c clientset.Interface, namespace string)

DumpAllNamespaceInfo dumps events, pods and nodes information in the given namespace.

func DumpDebugInfo 

func DumpDebugInfo(c clientset.Interface, ns string)

DumpDebugInfo dumps debug info of tests.

func DumpEventsInNamespace 

func DumpEventsInNamespace(eventsLister EventsLister, namespace string)

DumpEventsInNamespace dumps events in the given namespace.

func DumpNodeDebugInfo 

func DumpNodeDebugInfo(c clientset.Interface, nodeNames []string, logFunc func(fmt string, args ...interface{}))

DumpNodeDebugInfo dumps debug information of the given nodes.

func EnsureLoadBalancerResourcesDeleted 

func EnsureLoadBalancerResourcesDeleted(ip, portRange string) error

EnsureLoadBalancerResourcesDeleted ensures that cloud load balancer resources that were created are actually cleaned up. Currently only implemented for GCE/GKE.

func EtcdUpgrade 

func EtcdUpgrade(targetStorage, targetVersion string) error

EtcdUpgrade upgrades etcd on GCE.

func ExpectEqual 

func ExpectEqual(actual interface{}, extra interface{}, explain ...interface{})

ExpectEqual expects the specified two are the same, otherwise an exception raises

func ExpectError 

func ExpectError(err error, explain ...interface{})

ExpectError expects an error happens, otherwise an exception raises

func ExpectNoError 

func ExpectNoError(err error, explain ...interface{})

ExpectNoError checks if "err" is set, and if so, fails assertion while logging the error.

func ExpectNoErrorWithOffset 

func ExpectNoErrorWithOffset(offset int, err error, explain ...interface{})

ExpectNoErrorWithOffset checks if "err" is set, and if so, fails assertion while logging the error at "offset" levels above its caller (for example, for call chain f -> g -> ExpectNoErrorWithOffset(1, ...) error would be logged for "f").

func ExpectNoErrorWithRetries 

func ExpectNoErrorWithRetries(fn func() error, maxRetries int, explain ...interface{})

ExpectNoErrorWithRetries checks if an error occurs with the given retry count.

func ExpectNodeHasLabel 

func ExpectNodeHasLabel(c clientset.Interface, nodeName string, labelKey string, labelValue string)

ExpectNodeHasLabel expects that the given node has the given label pair.

func ExpectNodeHasTaint 

func ExpectNodeHasTaint(c clientset.Interface, nodeName string, taint *v1.Taint)

ExpectNodeHasTaint expects that the node has the given taint.

func ExpectNotEqual 

func ExpectNotEqual(actual interface{}, extra interface{}, explain ...interface{})

ExpectNotEqual expects the specified two are not the same, otherwise an exception raises

func Failf 

func Failf(format string, args ...interface{})

Failf logs the fail info.

func FailfWithOffset 

func FailfWithOffset(offset int, format string, args ...interface{})

FailfWithOffset calls "Fail" and logs the error at "offset" levels above its caller (for example, for call chain f -> g -> FailfWithOffset(1, ...) error would be logged for "f").

func GatherCPUProfile 

func GatherCPUProfile(componentName string, profileBaseName string, wg *sync.WaitGroup)

GatherCPUProfile gathers CPU profile.

func GatherCPUProfileForSeconds 

func GatherCPUProfileForSeconds(componentName string, profileBaseName string, seconds int, wg *sync.WaitGroup)

GatherCPUProfileForSeconds gathers CPU profile for specified seconds.

func GatherMemoryProfile 

func GatherMemoryProfile(componentName string, profileBaseName string, wg *sync.WaitGroup)

GatherMemoryProfile gathers memory profile.

func GenerateMasterRegexp 

func GenerateMasterRegexp(prefix string) string

GenerateMasterRegexp returns a regex for matching master node name.

func GetAllMasterAddresses 

func GetAllMasterAddresses(c clientset.Interface) []string

GetAllMasterAddresses returns all IP addresses on which the kubelet can reach the master. It may return internal and external IPs, even if we expect for e.g. internal IPs to be used (issue #56787), so that we can be sure to block the master fully during tests.

func GetBoundPV 

func GetBoundPV(client clientset.Interface, pvc *v1.PersistentVolumeClaim) (*v1.PersistentVolume, error)

GetBoundPV returns a PV details.

func GetClusterZones 

func GetClusterZones(c clientset.Interface) (sets.String, error)

GetClusterZones returns the values of zone label collected from all nodes.

func GetDefaultStorageClassName 

func GetDefaultStorageClassName(c clientset.Interface) (string, error)

GetDefaultStorageClassName returns default storageClass or return error

func GetFileModeRegex 

func GetFileModeRegex(filePath string, mask *int32) string

GetFileModeRegex returns a file mode related regex which should be matched by the mounttest pods' output. If the given mask is nil, then the regex will contain the default OS file modes, which are 0644 for Linux and 0775 for Windows.

func GetGroupNodes 

func GetGroupNodes(group string) ([]string, error)

GetGroupNodes returns a node name for the specified node group

func GetHostAddress 

func GetHostAddress(client clientset.Interface, p *v1.Pod) (string, error)

GetHostAddress gets the node for a pod and returns the first address. Returns an error if the node the pod is on doesn't have an address.

func GetHostExternalAddress 

func GetHostExternalAddress(client clientset.Interface, p *v1.Pod) (externalAddress string, err error)

GetHostExternalAddress gets the node for a pod and returns the first External address. Returns an error if the node the pod is on doesn't have an External address.

func GetKubemarkMasterComponentsResourceUsage 

func GetKubemarkMasterComponentsResourceUsage() map[string]*KubemarkResourceUsage

GetKubemarkMasterComponentsResourceUsage returns the resource usage of kubemark which contains multiple combinations of cpu and memory usage for each pod name. TODO: figure out how to move this to kubemark directory (need to factor test SSH out of e2e framework)

func GetLogToFileFunc 

func GetLogToFileFunc(file *os.File) func(format string, args ...interface{})

GetLogToFileFunc is a convenience function that returns a function that have the same interface as e2elog.Logf, but writes to a specified file.

func GetManagedInstanceGroupTemplateName 

func GetManagedInstanceGroupTemplateName(zone string) (string, error)

GetManagedInstanceGroupTemplateName returns the list of Google Compute Engine managed instance groups.

func GetMasterHost 

func GetMasterHost() string

GetMasterHost returns a hostname of a master.

func GetPodSecretUpdateTimeout 

func GetPodSecretUpdateTimeout(c clientset.Interface) time.Duration

GetPodSecretUpdateTimeout reuturns the timeout duration for updating pod secret.

func GetProviders 

func GetProviders() []string

GetProviders returns the names of all currently registered providers.

func GetReadySchedulableNodesOrDie 

func GetReadySchedulableNodesOrDie(c clientset.Interface) (nodes *v1.NodeList)

GetReadySchedulableNodesOrDie addresses the common use case of getting nodes you can do work on. 1) Needs to be schedulable. 2) Needs to be ready. If EITHER 1 or 2 is not true, most tests will want to ignore the node entirely. TODO: remove this function here when references point to e2enode.

func GroupSize 

func GroupSize(group string) (int, error)

GroupSize returns the size of an instance group

func KubeDescribe 

func KubeDescribe(text string, body func()) bool

KubeDescribe is wrapper function for ginkgo describe. Adds namespacing. TODO: Support type safe tagging as well https://github.com/kubernetes/kubernetes/pull/22401.

func KubectlCmd 

func KubectlCmd(args ...string) *exec.Cmd

KubectlCmd runs the kubectl executable through the wrapper script.

func KubectlVersion 

func KubectlVersion() (*utilversion.Version, error)

KubectlVersion gets the version of kubectl that's currently being used (see --kubectl-path in e2e.go to use an alternate kubectl).

func ListNamespaceEvents 

func ListNamespaceEvents(c clientset.Interface, ns string) error

ListNamespaceEvents lists the events in the given namespace.

func LoadClientset 

func LoadClientset() (*clientset.Clientset, error)

LoadClientset returns clientset for connecting to kubernetes clusters.

func LoadConfig 

func LoadConfig() (*restclient.Config, error)

LoadConfig returns a config for a rest client.

func LogClusterImageSources 

func LogClusterImageSources()

LogClusterImageSources writes out cluster image sources.

func LogFailedContainers 

func LogFailedContainers(c clientset.Interface, ns string, logFunc func(ftm string, args ...interface{}))

LogFailedContainers runs `kubectl logs` on a failed containers.

func Logf 

func Logf(format string, args ...interface{})

Logf logs the info.

func LookForString 

func LookForString(expectedString string, timeout time.Duration, fn func() string) (result string, err error)

LookForString looks for the given string in the output of fn, repeatedly calling fn until the timeout is reached or the string is found. Returns last log and possibly error if the string was not found. TODO(alejandrox1): move to pod/ subpkg once kubectl methods are refactored.

func LookForStringInFile 

func LookForStringInFile(ns, podName, container, file, expectedString string, timeout time.Duration) (result string, err error)

LookForStringInFile looks for the given string in a file in a specific pod container

func LookForStringInLog 

func LookForStringInLog(ns, podName, container, expectedString string, timeout time.Duration) (result string, err error)

LookForStringInLog looks for the given string in the log of a specific pod container

func LookForStringInPodExec 

func LookForStringInPodExec(ns, podName string, command []string, expectedString string, timeout time.Duration) (result string, err error)

LookForStringInPodExec looks for the given string in the output of a command executed in a specific pod container. TODO(alejandrox1): move to pod/ subpkg once kubectl methods are refactored.

func MakePersistentVolume 

func MakePersistentVolume(pvConfig PersistentVolumeConfig) *v1.PersistentVolume

MakePersistentVolume returns a PV definition based on the nfs server IP. If the PVC is not nil then the PV is defined with a ClaimRef which includes the PVC's namespace. If the PVC is nil then the PV is not defined with a ClaimRef. If no reclaimPolicy is assigned, assumes "Retain". Specs are expected to match the test's PVC. Note: the passed-in claim does not have a name until it is created and thus the PV's 

ClaimRef cannot be completely filled-in in this func. Therefore, the ClaimRef's name
is added later in CreatePVCPV.

func MakePersistentVolumeClaim 

func MakePersistentVolumeClaim(cfg PersistentVolumeClaimConfig, ns string) *v1.PersistentVolumeClaim

MakePersistentVolumeClaim returns a PVC API Object based on the PersistentVolumeClaimConfig.

func MakeWritePod 

func MakeWritePod(ns string, pvc *v1.PersistentVolumeClaim) *v1.Pod

MakeWritePod returns a pod definition based on the namespace. The pod references the PVC's name.

func MasterOSDistroIs 

func MasterOSDistroIs(supportedMasterOsDistros ...string) bool

MasterOSDistroIs returns true if the master OS distro is included in the supportedMasterOsDistros. Otherwise false.

func MasterUpgrade 

func MasterUpgrade(v string) error

MasterUpgrade upgrades master node on GCE/GKE.

func MasterUpgradeGCEWithKubeProxyDaemonSet 

func MasterUpgradeGCEWithKubeProxyDaemonSet(v string, enableKubeProxyDaemonSet bool) error

MasterUpgradeGCEWithKubeProxyDaemonSet upgrades master node on GCE with enabling/disabling the daemon set of kube-proxy. TODO(mrhohn): Remove this function when kube-proxy is run as a DaemonSet by default.

func MigTemplate 

func MigTemplate() (string, error)

MigTemplate (GCE-only) returns the name of the MIG template that the nodes of the cluster use.

func NewE2ETestNodePreparer 

func NewE2ETestNodePreparer(client clientset.Interface, countToStrategy []testutils.CountToStrategy) testutils.TestNodePreparer

NewE2ETestNodePreparer returns a new instance of E2ETestNodePreparer.

func NodeHasTaint 

func NodeHasTaint(c clientset.Interface, nodeName string, taint *v1.Taint) (bool, error)

NodeHasTaint returns true if the node has the given taint, else returns false.

func NodeOSDistroIs 

func NodeOSDistroIs(supportedNodeOsDistros ...string) bool

NodeOSDistroIs returns true if the node OS distro is included in the supportedNodeOsDistros. Otherwise false.

func NodeUpgrade 

func NodeUpgrade(f *Framework, v string, img string) error

NodeUpgrade upgrades nodes on GCE/GKE.

func NodeUpgradeGCEWithKubeProxyDaemonSet 

func NodeUpgradeGCEWithKubeProxyDaemonSet(f *Framework, v string, img string, enableKubeProxyDaemonSet bool) error

NodeUpgradeGCEWithKubeProxyDaemonSet upgrades nodes on GCE with enabling/disabling the daemon set of kube-proxy. TODO(mrhohn): Remove this function when kube-proxy is run as a DaemonSet by default.

func OpenWebSocketForURL 

func OpenWebSocketForURL(url *url.URL, config *restclient.Config, protocols []string) (*websocket.Conn, error)

OpenWebSocketForURL constructs a websocket connection to the provided URL, using the client config, with the specified protocols.

func PVPVCCleanup 

func PVPVCCleanup(c clientset.Interface, ns string, pv *v1.PersistentVolume, pvc *v1.PersistentVolumeClaim) []error

PVPVCCleanup cleans up a pv and pvc in a single pv/pvc test case. Note: delete errors are appended to []error so that we can attempt to delete both the pvc and pv.

func PVPVCMapCleanup 

func PVPVCMapCleanup(c clientset.Interface, ns string, pvols PVMap, claims PVCMap) []error

PVPVCMapCleanup Cleans up pvs and pvcs in multi-pv-pvc test cases. Entries found in the pv and claim maps are deleted as long as the Delete api call succeeds. Note: delete errors are appended to []error so that as many pvcs and pvs as possible are deleted.

func ParseKVLines 

func ParseKVLines(output, key string) string

ParseKVLines parses output that looks like lines containing "<key>: <val>" and returns <val> if <key> is found. Otherwise, it returns the empty string.

func PollURL 

func PollURL(route, host string, timeout time.Duration, interval time.Duration, httpClient *http.Client, expectUnreachable bool) error

PollURL polls till the url responds with a healthy http code. If expectUnreachable is true, it breaks on first non-healthy http code instead.

func PreconfiguredRuntimeClassHandler 

func PreconfiguredRuntimeClassHandler() string

PreconfiguredRuntimeClassHandler returns configured runtime handler.

func PrettyPrint 

func PrettyPrint(item interface{}) string

PrettyPrint returns a human-readable representation of an item.

func PrintSummaries 

func PrintSummaries(summaries []TestDataSummary, testBaseName string)

PrintSummaries prints summaries of tests.

func ProviderIs 

func ProviderIs(providers ...string) bool

ProviderIs returns true if the provider is included is the providers. Otherwise false.

func ProxyMode 

func ProxyMode(f *Framework) (string, error)

ProxyMode returns a proxyMode of a kube-proxy.

func RandomSuffix 

func RandomSuffix() string

RandomSuffix provides a random string to append to pods,services,rcs. TODO: Allow service names to have the same form as names 

for pods and replication controllers so we don't
need to use such a function and can instead
use the UUID utility function.

func RcByNameContainer 

func RcByNameContainer(name string, replicas int32, image string, labels map[string]string, c v1.Container,
	gracePeriod *int64) *v1.ReplicationController

RcByNameContainer returns a ReplicationController with specified name and container

func RcByNamePort 

func RcByNamePort(name string, replicas int32, image string, containerArgs []string, port int, protocol v1.Protocol,
	labels map[string]string, gracePeriod *int64) *v1.ReplicationController

RcByNamePort returns a ReplicationController with specified name and port

func RegisterClusterFlags 

func RegisterClusterFlags(flags *flag.FlagSet)

RegisterClusterFlags registers flags specific to the cluster e2e test suite.

func RegisterCommonFlags 

func RegisterCommonFlags(flags *flag.FlagSet)

RegisterCommonFlags registers flags common to all e2e test suites. The flag set can be flag.CommandLine (if desired) or a custom flag set that then gets passed to viperconfig.ViperizeFlags.

The other Register*Flags methods below can be used to add more test-specific flags. However, those settings then get added regardless whether the test is actually in the test suite.

For tests that have been converted to registering their options themselves, copy flags from test/e2e/framework/config as shown in HandleFlags.

func RegisterNodeFlags 

func RegisterNodeFlags(flags *flag.FlagSet)

RegisterNodeFlags registers flags specific to the node e2e test suite.

func RegisterProvider 

func RegisterProvider(name string, factory Factory)

RegisterProvider is expected to be called during application init, typically by an init function in a provider package.

func RemoveAvoidPodsOffNode 

func RemoveAvoidPodsOffNode(c clientset.Interface, nodeName string)

RemoveAvoidPodsOffNode removes AvoidPods annotations from the node. It does not fail if no such annotation exists.

func RemoveCleanupAction 

func RemoveCleanupAction(p CleanupActionHandle)

RemoveCleanupAction removes a function that was installed by AddCleanupAction.

func RemoveLabelOffNode 

func RemoveLabelOffNode(c clientset.Interface, nodeName string, labelKey string)

RemoveLabelOffNode is for cleaning up labels temporarily added to node, won't fail if target label doesn't exist or has been removed.

func RemoveTaintOffNode 

func RemoveTaintOffNode(c clientset.Interface, nodeName string, taint v1.Taint)

RemoveTaintOffNode removes the given taint from the given node.

func ResizeGroup 

func ResizeGroup(group string, size int32) error

ResizeGroup resizes an instance group

func RestartApiserver 

func RestartApiserver(cs clientset.Interface) error

RestartApiserver restarts the kube-apiserver.

func RestartControllerManager 

func RestartControllerManager() error

RestartControllerManager restarts the kube-controller-manager.

func RestartKubeProxy 

func RestartKubeProxy(host string) error

RestartKubeProxy restarts kube-proxy on the given host.

func RestartKubelet 

func RestartKubelet(host string) error

RestartKubelet restarts kubelet on the given host.

func RestclientConfig 

func RestclientConfig(kubeContext string) (*clientcmdapi.Config, error)

RestclientConfig returns a config holds the information needed to build connection to kubernetes clusters.

func RunCleanupActions 

func RunCleanupActions()

RunCleanupActions runs all functions installed by AddCleanupAction. It does not remove them (see RemoveCleanupAction) but it does run unlocked, so they may remove themselves.

func RunCmd 

func RunCmd(command string, args ...string) (string, string, error)

RunCmd runs cmd using args and returns its stdout and stderr. It also outputs cmd's stdout and stderr to their respective OS streams.

func RunCmdEnv 

func RunCmdEnv(env []string, command string, args ...string) (string, string, error)

RunCmdEnv runs cmd with the provided environment and args and returns its stdout and stderr. It also outputs cmd's stdout and stderr to their respective OS streams.

func RunHostCmd 

func RunHostCmd(ns, name, cmd string) (string, error)

RunHostCmd runs the given cmd in the context of the given pod using `kubectl exec` inside of a shell.

func RunHostCmdOrDie 

func RunHostCmdOrDie(ns, name, cmd string) string

RunHostCmdOrDie calls RunHostCmd and dies on error.

func RunHostCmdWithRetries 

func RunHostCmdWithRetries(ns, name, cmd string, interval, timeout time.Duration) (string, error)

RunHostCmdWithRetries calls RunHostCmd and retries all errors until it succeeds or the specified timeout expires. This can be used with idempotent commands to deflake transient Node issues.

func RunIfContainerRuntimeIs 

func RunIfContainerRuntimeIs(runtimes ...string)

RunIfContainerRuntimeIs runs if the container runtime is included in the runtimes.

func RunIfSystemSpecNameIs 

func RunIfSystemSpecNameIs(names ...string)

RunIfSystemSpecNameIs runs if the system spec name is included in the names.

func RunKubectl 

func RunKubectl(args ...string) (string, error)

RunKubectl is a convenience wrapper over kubectlBuilder

func RunKubectlInput 

func RunKubectlInput(data string, args ...string) (string, error)

RunKubectlInput is a convenience wrapper over kubectlBuilder that takes input to stdin

func RunKubectlOrDie 

func RunKubectlOrDie(args ...string) string

RunKubectlOrDie is a convenience wrapper over kubectlBuilder

func RunKubectlOrDieInput 

func RunKubectlOrDieInput(data string, args ...string) string

RunKubectlOrDieInput is a convenience wrapper over kubectlBuilder that takes input to stdin

func RunKubemciCmd 

func RunKubemciCmd(args ...string) (string, error)

RunKubemciCmd is a convenience wrapper over kubectlBuilder to run kubemci. It assumes that kubemci exists in PATH.

func RunKubemciWithKubeconfig 

func RunKubemciWithKubeconfig(args ...string) (string, error)

RunKubemciWithKubeconfig is a convenience wrapper over RunKubemciCmd

func RunRC 

func RunRC(config testutils.RCConfig) error

RunRC Launches (and verifies correctness) of a Replication Controller and will wait for all pods it spawns to become "Running".

func ScaleRC 

func ScaleRC(clientset clientset.Interface, scalesGetter scaleclient.ScalesGetter, ns, name string, size uint, wait bool) error

ScaleRC scales Replication Controller to be desired size.

func ScaleResource 

func ScaleResource(
	clientset clientset.Interface,
	scalesGetter scaleclient.ScalesGetter,
	ns, name string,
	size uint,
	wait bool,
	kind schema.GroupKind,
	gvr schema.GroupVersionResource,
) error

ScaleResource scales resource to the given size.

func ServerVersionGTE 

func ServerVersionGTE(v *utilversion.Version, c discovery.ServerVersionInterface) (bool, error)

ServerVersionGTE returns true if v is greater than or equal to the server version.

TODO(18726): This should be incorporated into client.VersionInterface.

func SetupSuite 

func SetupSuite()

SetupSuite is the boilerplate that can be used to setup ginkgo test suites, on the SynchronizedBeforeSuite step. There are certain operations we only want to run once per overall test invocation (such as deleting old namespaces, or verifying that all system pods are running. Because of the way Ginkgo runs tests in parallel, we must use SynchronizedBeforeSuite to ensure that these operations only run on the first parallel Ginkgo node.

This function takes two parameters: one function which runs on only the first Ginkgo node, returning an opaque byte array, and then a second function which runs on all Ginkgo nodes, accepting the byte array.

func SetupSuitePerGinkgoNode 

func SetupSuitePerGinkgoNode()

SetupSuitePerGinkgoNode is the boilerplate that can be used to setup ginkgo test suites, on the SynchronizedBeforeSuite step. There are certain operations we only want to run once per overall test invocation on each Ginkgo node such as making some global variables accessible to all parallel executions Because of the way Ginkgo runs tests in parallel, we must use SynchronizedBeforeSuite Ref: https://onsi.github.io/ginkgo/#parallel-specs

func SimpleGET 

func SimpleGET(c *http.Client, url, host string) (string, error)

SimpleGET executes a get on the given url, returns error if non-200 returned.

func SkipIfContainerRuntimeIs 

func SkipIfContainerRuntimeIs(runtimes ...string)

SkipIfContainerRuntimeIs skips if the container runtime is included in the runtimes.

func SkipIfMissingResource 

func SkipIfMissingResource(dynamicClient dynamic.Interface, gvr schema.GroupVersionResource, namespace string)

SkipIfMissingResource skips if the gvr resource is missing.

func SkipIfMultizone 

func SkipIfMultizone(c clientset.Interface)

SkipIfMultizone skips if the cluster has multizone.

func SkipIfNoDefaultStorageClass 

func SkipIfNoDefaultStorageClass(c clientset.Interface)

SkipIfNoDefaultStorageClass skips tests if no default SC can be found.

func SkipIfNodeOSDistroIs 

func SkipIfNodeOSDistroIs(unsupportedNodeOsDistros ...string)

SkipIfNodeOSDistroIs skips if the node OS distro is included in the unsupportedNodeOsDistros.

func SkipIfProviderIs 

func SkipIfProviderIs(unsupportedProviders ...string)

SkipIfProviderIs skips if the provider is included in the unsupportedProviders.

func SkipUnlessAtLeast 

func SkipUnlessAtLeast(value int, minValue int, message string)

SkipUnlessAtLeast skips if the value is less than the minValue.

func SkipUnlessLocalEphemeralStorageEnabled 

func SkipUnlessLocalEphemeralStorageEnabled()

SkipUnlessLocalEphemeralStorageEnabled skips if the LocalStorageCapacityIsolation is not enabled.

func SkipUnlessMasterOSDistroIs 

func SkipUnlessMasterOSDistroIs(supportedMasterOsDistros ...string)

SkipUnlessMasterOSDistroIs skips if the master OS distro is not included in the supportedMasterOsDistros.

func SkipUnlessMultizone 

func SkipUnlessMultizone(c clientset.Interface)

SkipUnlessMultizone skips if the cluster does not have multizone.

func SkipUnlessNodeCountIsAtLeast 

func SkipUnlessNodeCountIsAtLeast(minNodeCount int)

SkipUnlessNodeCountIsAtLeast skips if the number of nodes is less than the minNodeCount.

func SkipUnlessNodeCountIsAtMost 

func SkipUnlessNodeCountIsAtMost(maxNodeCount int)

SkipUnlessNodeCountIsAtMost skips if the number of nodes is greater than the maxNodeCount.

func SkipUnlessNodeOSDistroIs 

func SkipUnlessNodeOSDistroIs(supportedNodeOsDistros ...string)

SkipUnlessNodeOSDistroIs skips if the node OS distro is not included in the supportedNodeOsDistros.

func SkipUnlessPrometheusMonitoringIsEnabled 

func SkipUnlessPrometheusMonitoringIsEnabled(supportedMonitoring ...string)

SkipUnlessPrometheusMonitoringIsEnabled skips if the prometheus monitoring is not enabled.

func SkipUnlessProviderIs 

func SkipUnlessProviderIs(supportedProviders ...string)

SkipUnlessProviderIs skips if the provider is not included in the supportedProviders.

func SkipUnlessSSHKeyPresent 

func SkipUnlessSSHKeyPresent()

SkipUnlessSSHKeyPresent skips if no SSH key is found.

func SkipUnlessServerVersionGTE 

func SkipUnlessServerVersionGTE(v *utilversion.Version, c discovery.ServerVersionInterface)

SkipUnlessServerVersionGTE skips if the server version is less than v.

func SkipUnlessTaintBasedEvictionsEnabled 

func SkipUnlessTaintBasedEvictionsEnabled()

SkipUnlessTaintBasedEvictionsEnabled skips if the TaintBasedEvictions is not enabled.

func Skipf 

func Skipf(format string, args ...interface{})

Skipf skips with information about why the test is being skipped.

func StartCPUProfileGatherer 

func StartCPUProfileGatherer(componentName string, profileBaseName string, interval time.Duration) chan struct{}

StartCPUProfileGatherer performs polling-based gathering of the component's CPU profile. It takes the interval b/w consecutive gatherings as an argument and starts the gathering goroutine. To stop the gatherer, close the returned channel.

func StartCmdAndStreamOutput 

func StartCmdAndStreamOutput(cmd *exec.Cmd) (stdout, stderr io.ReadCloser, err error)

StartCmdAndStreamOutput returns stdout and stderr after starting the given cmd.

func TestHitNodesFromOutside 

func TestHitNodesFromOutside(externalIP string, httpPort int32, timeout time.Duration, expectedHosts sets.String) error

TestHitNodesFromOutside checkes HTTP connectivity from outside.

func TestHitNodesFromOutsideWithCount 

func TestHitNodesFromOutsideWithCount(externalIP string, httpPort int32, timeout time.Duration, expectedHosts sets.String,
	countToSucceed int) error

TestHitNodesFromOutsideWithCount checkes HTTP connectivity from outside with count.

func TestUnderTemporaryNetworkFailure 

func TestUnderTemporaryNetworkFailure(c clientset.Interface, ns string, node *v1.Node, testFunc func())

TestUnderTemporaryNetworkFailure blocks outgoing network traffic on 'node'. Then runs testFunc and returns its status. At the end (even in case of errors), the network traffic is brought back to normal. This function executes commands on a node so it will work only for some environments.

func TranslateIPv4ToIPv6 

func TranslateIPv4ToIPv6(ip string) string

TranslateIPv4ToIPv6 maps an IPv4 address into a valid IPv6 address adding the well known prefix "0::ffff:" https://tools.ietf.org/html/rfc2765 if the ip is IPv4 and the cluster IPFamily is IPv6, otherwise returns the same ip

func TryKill 

func TryKill(cmd *exec.Cmd)

TryKill is rough equivalent of ctrl+c for cleaning up processes. Intended to be run in defer.

func UnblockNetwork 

func UnblockNetwork(from string, to string)

UnblockNetwork unblocks network between the given from value and the given to value.

func UpdateDaemonSetWithRetries 

func UpdateDaemonSetWithRetries(c clientset.Interface, namespace, name string, applyUpdate updateDSFunc) (ds *appsv1.DaemonSet, err error)

UpdateDaemonSetWithRetries updates daemonsets with the given applyUpdate func until it succeeds or a timeout expires.

func UpdateReplicationControllerWithRetries 

func UpdateReplicationControllerWithRetries(c clientset.Interface, namespace, name string, applyUpdate updateRcFunc) (*v1.ReplicationController, error)

UpdateReplicationControllerWithRetries retries updating the given rc on conflict with the following steps: 1. Get latest resource 2. applyUpdate 3. Update the resource

func ValidateController 

func ValidateController(c clientset.Interface, containerImage string, replicas int, containername string, testname string, validator validatorFn, ns string)

ValidateController is a generic mechanism for testing RC's that are running. It takes a container name, a test name, and a validator function which is plugged in by a specific test. "containername": this is grepped for. "containerImage" : this is the name of the image we expect to be launched. Not to confuse w/ images (kitten.jpg) which are validated. "testname": which gets bubbled up to the logging/failure messages if errors happen. "validator" function: This function is given a podID and a client, and it can do some specific validations that way.

func WaitAndVerifyBinds 

func WaitAndVerifyBinds(c clientset.Interface, ns string, pvols PVMap, claims PVCMap, testExpected bool) error

WaitAndVerifyBinds searches for bound PVs and PVCs by examining pvols for non-nil claimRefs. NOTE: Each iteration waits for a maximum of 3 minutes per PV and, if the PV is bound, 

up to 3 minutes for the PVC. When the number of PVs != number of PVCs, this can lead
to situations where the maximum wait times are reached several times in succession,
extending test time. Thus, it is recommended to keep the delta between PVs and PVCs
small.

func WaitForAllNodesSchedulable 

func WaitForAllNodesSchedulable(c clientset.Interface, timeout time.Duration) error

WaitForAllNodesSchedulable waits up to timeout for all (but TestContext.AllowedNotReadyNodes) to become scheduable.

func WaitForApiserverUp 

func WaitForApiserverUp(c clientset.Interface) error

WaitForApiserverUp waits for the kube-apiserver to be up.

func WaitForControllerManagerUp 

func WaitForControllerManagerUp() error

WaitForControllerManagerUp waits for the kube-controller-manager to be up.

func WaitForDaemonSets 

func WaitForDaemonSets(c clientset.Interface, ns string, allowedNotReadyNodes int32, timeout time.Duration) error

WaitForDaemonSets for all daemonsets in the given namespace to be ready (defined as all but 'allowedNotReadyNodes' pods associated with that daemonset are ready).

func WaitForDefaultServiceAccountInNamespace 

func WaitForDefaultServiceAccountInNamespace(c clientset.Interface, namespace string) error

WaitForDefaultServiceAccountInNamespace waits for the default service account to be provisioned the default service account is what is associated with pods when they do not specify a service account as a result, pods are not able to be provisioned in a namespace until the service account is provisioned

func WaitForGroupSize 

func WaitForGroupSize(group string, size int32) error

WaitForGroupSize waits for node instance group reached the desired size

func WaitForKubeletUp 

func WaitForKubeletUp(host string) error

WaitForKubeletUp waits for the kubelet on the given host to be up.

func WaitForMasters 

func WaitForMasters(masterPrefix string, c clientset.Interface, size int, timeout time.Duration) error

WaitForMasters waits until the cluster has the desired number of ready masters in it.

func WaitForNamespacesDeleted 

func WaitForNamespacesDeleted(c clientset.Interface, namespaces []string, timeout time.Duration) error

WaitForNamespacesDeleted waits for the namespaces to be deleted.

func WaitForNodeHasTaintOrNot 

func WaitForNodeHasTaintOrNot(c clientset.Interface, nodeName string, taint *v1.Taint, wantTrue bool, timeout time.Duration) error

WaitForNodeHasTaintOrNot waits for a taint to be added/removed from the node until timeout occurs, whichever comes first.

func WaitForPVClaimBoundPhase 

func WaitForPVClaimBoundPhase(client clientset.Interface, pvclaims []*v1.PersistentVolumeClaim, timeout time.Duration) ([]*v1.PersistentVolume, error)

WaitForPVClaimBoundPhase waits until all pvcs phase set to bound

func WaitForPersistentVolumeClaimDeleted 

func WaitForPersistentVolumeClaimDeleted(c clientset.Interface, ns string, pvcName string, Poll, timeout time.Duration) error

WaitForPersistentVolumeClaimDeleted waits for a PersistentVolumeClaim to be removed from the system until timeout occurs, whichever comes first.

func WaitForPersistentVolumeClaimPhase 

func WaitForPersistentVolumeClaimPhase(phase v1.PersistentVolumeClaimPhase, c clientset.Interface, ns string, pvcName string, Poll, timeout time.Duration) error

WaitForPersistentVolumeClaimPhase waits for a PersistentVolumeClaim to be in a specific phase or until timeout occurs, whichever comes first.

func WaitForPersistentVolumeClaimsPhase 

func WaitForPersistentVolumeClaimsPhase(phase v1.PersistentVolumeClaimPhase, c clientset.Interface, ns string, pvcNames []string, Poll, timeout time.Duration, matchAny bool) error

WaitForPersistentVolumeClaimsPhase waits for any (if matchAny is true) or all (if matchAny is false) PersistentVolumeClaims to be in a specific phase or until timeout occurs, whichever comes first.

func WaitForPersistentVolumeDeleted 

func WaitForPersistentVolumeDeleted(c clientset.Interface, pvName string, Poll, timeout time.Duration) error

WaitForPersistentVolumeDeleted waits for a PersistentVolume to get deleted or until timeout occurs, whichever comes first.

func WaitForPersistentVolumePhase 

func WaitForPersistentVolumePhase(phase v1.PersistentVolumePhase, c clientset.Interface, pvName string, Poll, timeout time.Duration) error

WaitForPersistentVolumePhase waits for a PersistentVolume to be in a specific phase or until timeout occurs, whichever comes first.

func WaitForRCPodToDisappear 

func WaitForRCPodToDisappear(c clientset.Interface, ns, rcName, podName string) error

WaitForRCPodToDisappear returns nil if the pod from the given replication controller (described by rcName) no longer exists. In case of failure or too long waiting time, an error is returned.

func WaitForRCToStabilize 

func WaitForRCToStabilize(c clientset.Interface, ns, name string, timeout time.Duration) error

WaitForRCToStabilize waits till the RC has a matching generation/replica count between spec and status.

func WaitForReplicationController 

func WaitForReplicationController(c clientset.Interface, namespace, name string, exist bool, interval, timeout time.Duration) error

WaitForReplicationController waits until the RC appears (exist == true), or disappears (exist == false)

func WaitForReplicationControllerwithSelector 

func WaitForReplicationControllerwithSelector(c clientset.Interface, namespace string, selector labels.Selector, exist bool, interval,
	timeout time.Duration) error

WaitForReplicationControllerwithSelector waits until any RC with given selector appears (exist == true), or disappears (exist == false)

func WaitForService 

func WaitForService(c clientset.Interface, namespace, name string, exist bool, interval, timeout time.Duration) error

WaitForService waits until the service appears (exist == true), or disappears (exist == false)

func WaitForServiceEndpointsNum 

func WaitForServiceEndpointsNum(c clientset.Interface, namespace, serviceName string, expectNum int, interval, timeout time.Duration) error

WaitForServiceEndpointsNum waits until the amount of endpoints that implement service to expectNum.

func WaitForServiceWithSelector 

func WaitForServiceWithSelector(c clientset.Interface, namespace string, selector labels.Selector, exist bool, interval,
	timeout time.Duration) error

WaitForServiceWithSelector waits until any service with given selector appears (exist == true), or disappears (exist == false)

func WaitForStableCluster 

func WaitForStableCluster(c clientset.Interface, masterNodes sets.String) int

WaitForStableCluster waits until all existing pods are scheduled and returns their amount.

func WaitForStatefulSetReplicasReady 

func WaitForStatefulSetReplicasReady(statefulSetName, ns string, c clientset.Interface, Poll, timeout time.Duration) error

WaitForStatefulSetReplicasReady waits for all replicas of a StatefulSet to become ready or until timeout occurs, whichever comes first.

func WaitOnPVandPVC 

func WaitOnPVandPVC(c clientset.Interface, ns string, pv *v1.PersistentVolume, pvc *v1.PersistentVolumeClaim) error

WaitOnPVandPVC waits for the pv and pvc to bind to each other.

Types

type CleanupActionHandle 

type CleanupActionHandle *int

CleanupActionHandle is an integer pointer type for handling cleanup action

func AddCleanupAction 

func AddCleanupAction(fn func()) CleanupActionHandle

AddCleanupAction installs a function that will be called in the event of the whole test being terminated. This allows arbitrary pieces of the overall test to hook into SynchronizedAfterSuite().

type ClientConfigGetter 

type ClientConfigGetter func() (*restclient.Config, error)

ClientConfigGetter is a func that returns getter to return a config.

type CloudConfig 

type CloudConfig struct {
	APIEndpoint       string
	ProjectID         string
	Zone              string // for multizone tests, arbitrarily chosen zone
	Region            string
	MultiZone         bool
	MultiMaster       bool
	Cluster           string
	MasterName        string
	NodeInstanceGroup string // comma-delimited list of groups' names
	NumNodes          int
	ClusterIPRange    string
	ClusterTag        string
	Network           string
	ConfigFile        string // for azure and openstack
	NodeTag           string
	MasterTag         string

	Provider ProviderInterface
}

CloudConfig holds the cloud configuration for e2e test suites.

type ClusterVerification 

type ClusterVerification struct {
	// contains filtered or unexported fields
}

ClusterVerification is a struct for a verification of cluster state.

func (*ClusterVerification) ForEach 

func (cl *ClusterVerification) ForEach(podFunc func(v1.Pod)) error

ForEach runs a function against every verifiable pod. Be warned that this doesn't wait for "n" pods to verify, so it may return very quickly if you have strict pod state requirements.

For example, if you require at least 5 pods to be running before your test will pass, its smart to first call "clusterVerification.WaitFor(5)" before you call clusterVerification.ForEach.

func (*ClusterVerification) WaitFor 

func (cl *ClusterVerification) WaitFor(atLeast int, timeout time.Duration) ([]v1.Pod, error)

WaitFor waits for some minimum number of pods to be verified, according to the PodStateVerification definition.

func (*ClusterVerification) WaitForOrFail 

func (cl *ClusterVerification) WaitForOrFail(atLeast int, timeout time.Duration)

WaitForOrFail provides a shorthand WaitFor with failure as an option if anything goes wrong.

type ContainerResourceGatherer 

type ContainerResourceGatherer struct {
	// contains filtered or unexported fields
}

ContainerResourceGatherer is a struct for gathering container resource.

func NewResourceUsageGatherer 

func NewResourceUsageGatherer(c clientset.Interface, options ResourceGathererOptions, pods *v1.PodList) (*ContainerResourceGatherer, error)

NewResourceUsageGatherer returns a new ContainerResourceGatherer.

func (*ContainerResourceGatherer) StartGatheringData 

func (g *ContainerResourceGatherer) StartGatheringData()

StartGatheringData starts a stat gathering worker blocks for each node to track, and blocks until StopAndSummarize is called.

func (*ContainerResourceGatherer) StopAndSummarize 

func (g *ContainerResourceGatherer) StopAndSummarize(percentiles []int, constraints map[string]ResourceConstraint) (*ResourceUsageSummary, error)

StopAndSummarize stops stat gathering workers, processes the collected stats, generates resource summary for the passed-in percentiles, and returns the summary. It returns an error if the resource usage at any percentile is beyond the specified resource constraints.

type CreateTestingNSFn 

type CreateTestingNSFn func(baseName string, c clientset.Interface, labels map[string]string) (*v1.Namespace, error)

CreateTestingNSFn is a func that is responsible for creating namespace used for executing e2e tests.

type E2ETestNodePreparer 

type E2ETestNodePreparer struct {
	// contains filtered or unexported fields
}

E2ETestNodePreparer implements testutils.TestNodePreparer interface, which is used to create/modify Nodes before running a test.

func (*E2ETestNodePreparer) CleanupNodes 

func (p *E2ETestNodePreparer) CleanupNodes() error

CleanupNodes cleanups nodes in the cluster.

func (*E2ETestNodePreparer) PrepareNodes 

func (p *E2ETestNodePreparer) PrepareNodes() error

PrepareNodes prepares nodes in the cluster.

type EventsLister 

type EventsLister func(opts metav1.ListOptions, ns string) (*v1.EventList, error)

EventsLister is a func that lists events.

type ExecOptions 

type ExecOptions struct {
	Command       []string
	Namespace     string
	PodName       string
	ContainerName string
	Stdin         io.Reader
	CaptureStdout bool
	CaptureStderr bool
	// If false, whitespace in std{err,out} will be removed.
	PreserveWhitespace bool
}

ExecOptions passed to ExecWithOptions

type Factory 

type Factory func() (ProviderInterface, error)

Factory is a func which operates provider specific behavior.

type FlakeReport 

type FlakeReport struct {
	Flakes     []string `json:"flakes"`
	FlakeCount int      `json:"flakeCount"`
	// contains filtered or unexported fields
}

FlakeReport is a struct for managing the flake report.

func NewFlakeReport 

func NewFlakeReport() *FlakeReport

NewFlakeReport returns a new flake report.

func (*FlakeReport) GetFlakeCount 

func (f *FlakeReport) GetFlakeCount() int

GetFlakeCount returns the flake count.

func (*FlakeReport) PrintHumanReadable 

func (f *FlakeReport) PrintHumanReadable() string

PrintHumanReadable returns string of flake report.

func (*FlakeReport) PrintJSON 

func (f *FlakeReport) PrintJSON() string

PrintJSON returns the summary of frake report with JSON format.

func (*FlakeReport) RecordFlakeIfError 

func (f *FlakeReport) RecordFlakeIfError(err error, optionalDescription ...interface{})

RecordFlakeIfError records the error (if non-nil) as a flake along with an optional description. This can be used as a replacement of framework.ExpectNoError() for non-critical errors that can be considered as 'flakes' to avoid causing failures in tests.

func (*FlakeReport) SummaryKind 

func (f *FlakeReport) SummaryKind() string

SummaryKind returns the summary of flake report.

type Framework 

type Framework struct {
	BaseName string

	// Set together with creating the ClientSet and the namespace.
	// Guaranteed to be unique in the cluster even when running the same
	// test multiple times in parallel.
	UniqueName string

	ClientSet                        clientset.Interface
	KubemarkExternalClusterClientSet clientset.Interface

	DynamicClient dynamic.Interface

	ScalesGetter scaleclient.ScalesGetter

	SkipNamespaceCreation bool          // Whether to skip creating a namespace
	Namespace             *v1.Namespace // Every test has at least one namespace unless creation is skipped

	NamespaceDeletionTimeout time.Duration
	SkipPrivilegedPSPBinding bool // Whether to skip creating a binding to the privileged PSP in the test namespace

	// Constraints that passed to a check which is executed after data is gathered to
	// see if 99% of results are within acceptable bounds. It has to be injected in the test,
	// as expectations vary greatly. Constraints are grouped by the container names.
	AddonResourceConstraints map[string]ResourceConstraint

	// configuration for framework's client
	Options Options

	// Place where various additional data is stored during test run to be printed to ReportDir,
	// or stdout if ReportDir is not set once test ends.
	TestSummaries []TestDataSummary
	// contains filtered or unexported fields
}

Framework supports common operations used by e2e tests; it will keep a client & a namespace for you. Eventual goal is to merge this with integration test framework.

func NewDefaultFramework 

func NewDefaultFramework(baseName string) *Framework

NewDefaultFramework makes a new framework and sets up a BeforeEach/AfterEach for you (you can write additional before/after each functions).

func NewFramework 

func NewFramework(baseName string, options Options, client clientset.Interface) *Framework

NewFramework creates a test framework.

func (*Framework) AddNamespacesToDelete 

func (f *Framework) AddNamespacesToDelete(namespaces ...*v1.Namespace)

AddNamespacesToDelete adds one or more namespaces to be deleted when the test completes.

func (*Framework) AfterEach 

func (f *Framework) AfterEach()

AfterEach deletes the namespace, after reading its events.

func (*Framework) BeforeEach 

func (f *Framework) BeforeEach()

BeforeEach gets a client and makes a namespace.

func (*Framework) CheckFileSizeViaContainer 

func (f *Framework) CheckFileSizeViaContainer(podName, containerName, path string) (string, error)

CheckFileSizeViaContainer returns the list of file size under the specified path.

func (*Framework) CreateFromManifests 

func (f *Framework) CreateFromManifests(patch func(item interface{}) error, files ...string) (func(), error)

CreateFromManifests is a combination of LoadFromManifests, PatchItems, patching with an optional custom function, and CreateItems.

func (*Framework) CreateItems 

func (f *Framework) CreateItems(items ...interface{}) (func(), error)

CreateItems creates the items. Each of them must be an API object of a type that is registered in Factory.

It returns either a cleanup function or an error, but never both.

Cleaning up after a test can be triggered in two ways:

PatchItems has the some limitations as LoadFromManifests: - only some common items are supported, unknown ones trigger an error - only the latest stable API version for each item is supported

func (*Framework) CreateNamespace 

func (f *Framework) CreateNamespace(baseName string, labels map[string]string) (*v1.Namespace, error)

CreateNamespace creates a namespace for e2e testing.

func (*Framework) CreatePodsPerNodeForSimpleApp 

func (f *Framework) CreatePodsPerNodeForSimpleApp(appName string, podSpec func(n v1.Node) v1.PodSpec, maxCount int) map[string]string

CreatePodsPerNodeForSimpleApp creates pods w/ labels. Useful for tests which make a bunch of pods w/o any networking.

func (*Framework) CreateServiceForSimpleApp 

func (f *Framework) CreateServiceForSimpleApp(contPort, svcPort int, appName string) *v1.Service

CreateServiceForSimpleApp returns a service that selects/exposes pods (send -1 ports if no exposure needed) with an app label.

func (*Framework) CreateServiceForSimpleAppWithPods 

func (f *Framework) CreateServiceForSimpleAppWithPods(contPort int, svcPort int, appName string, podSpec func(n v1.Node) v1.PodSpec, count int, block bool) (*v1.Service, error)

CreateServiceForSimpleAppWithPods is a convenience wrapper to create a service and its matching pods all at once.

func (*Framework) ExecCommandInContainer 

func (f *Framework) ExecCommandInContainer(podName, containerName string, cmd ...string) string

ExecCommandInContainer executes a command in the specified container.

func (*Framework) ExecCommandInContainerWithFullOutput 

func (f *Framework) ExecCommandInContainerWithFullOutput(podName, containerName string, cmd ...string) (string, string, error)

ExecCommandInContainerWithFullOutput executes a command in the specified container and return stdout, stderr and error

func (*Framework) ExecShellInContainer 

func (f *Framework) ExecShellInContainer(podName, containerName string, cmd string) string

ExecShellInContainer executes the specified command on the pod's container.

func (*Framework) ExecShellInPod 

func (f *Framework) ExecShellInPod(podName string, cmd string) string

ExecShellInPod executes the specified command on the pod.

func (*Framework) ExecShellInPodWithFullOutput 

func (f *Framework) ExecShellInPodWithFullOutput(podName string, cmd string) (string, string, error)

ExecShellInPodWithFullOutput executes the specified command on the Pod and returns stdout, stderr and error.

func (*Framework) ExecWithOptions 

func (f *Framework) ExecWithOptions(options ExecOptions) (string, string, error)

ExecWithOptions executes a command in the specified container, returning stdout, stderr and error. `options` allowed for additional parameters to be passed.

func (*Framework) LoadFromManifests 

func (f *Framework) LoadFromManifests(files ...string) ([]interface{}, error)

LoadFromManifests loads .yaml or .json manifest files and returns all items that it finds in them. It supports all items for which there is a factory registered in factories and .yaml files with multiple items separated by "---". Files are accessed via the "testfiles" package, which means they can come from a file system or be built into the binary.

LoadFromManifests has some limitations:

func (*Framework) MatchContainerOutput 

func (f *Framework) MatchContainerOutput(
	pod *v1.Pod,
	containerName string,
	expectedOutput []string,
	matcher func(string, ...interface{}) gomegatypes.GomegaMatcher) error

MatchContainerOutput creates a pod and waits for all it's containers to exit with success. It then tests that the matcher with each expectedOutput matches the output of the specified container.

func (*Framework) NewAgnhostPod 

func (f *Framework) NewAgnhostPod(name string, args ...string) *v1.Pod

NewAgnhostPod returns a pod that uses the agnhost image. The image's binary supports various subcommands that behave the same, no matter the underlying OS.

func (*Framework) NewClusterVerification 

func (f *Framework) NewClusterVerification(namespace *v1.Namespace, filter PodStateVerification) *ClusterVerification

NewClusterVerification creates a new cluster verification.

func (*Framework) NewTestPod 

func (f *Framework) NewTestPod(name string, requests v1.ResourceList, limits v1.ResourceList) *v1.Pod

NewTestPod returns a pod that has the specified requests and limits

func (*Framework) PatchItems 

func (f *Framework) PatchItems(items ...interface{}) error

PatchItems modifies the given items in place such that each test gets its own instances, to avoid conflicts between different tests and between tests and normal deployments.

This is done by: - creating namespaced items inside the test's namespace - changing the name of non-namespaced items like ClusterRole

PatchItems has some limitations: - only some common items are supported, unknown ones trigger an error - only the latest stable API version for each item is supported

func (*Framework) PatchName 

func (f *Framework) PatchName(item *string)

PatchName makes the name of some item unique by appending the generated unique name.

func (*Framework) PatchNamespace 

func (f *Framework) PatchNamespace(item *string)

PatchNamespace moves the item into the test's namespace. Not all items can be namespaced. For those, the name also needs to be patched.

func (*Framework) PodClient 

func (f *Framework) PodClient() *PodClient

PodClient is a convenience method for getting a pod client interface in the framework's namespace, possibly applying test-suite specific transformations to the pod spec, e.g. for node e2e pod scheduling.

func (*Framework) PodClientNS 

func (f *Framework) PodClientNS(namespace string) *PodClient

PodClientNS is a convenience method for getting a pod client interface in an alternative namespace, possibly applying test-suite specific transformations to the pod spec, e.g. for node e2e pod scheduling.

func (*Framework) ReadFileViaContainer 

func (f *Framework) ReadFileViaContainer(podName, containerName string, path string) (string, error)

ReadFileViaContainer reads a file using kubectl exec cat <path>.

func (*Framework) RecordFlakeIfError 

func (f *Framework) RecordFlakeIfError(err error, optionalDescription ...interface{})

RecordFlakeIfError records flakeness info if error happens. NOTE: This function is not used at any places yet, but we are in progress for https://github.com/kubernetes/kubernetes/issues/66239 which requires this. Please don't remove this.

func (*Framework) TestContainerOutput 

func (f *Framework) TestContainerOutput(scenarioName string, pod *v1.Pod, containerIndex int, expectedOutput []string)

TestContainerOutput runs the given pod in the given namespace and waits for all of the containers in the podSpec to move into the 'Success' status, and tests the specified container log against the given expected output using a substring matcher.

func (*Framework) TestContainerOutputRegexp 

func (f *Framework) TestContainerOutputRegexp(scenarioName string, pod *v1.Pod, containerIndex int, expectedOutput []string)

TestContainerOutputRegexp runs the given pod in the given namespace and waits for all of the containers in the podSpec to move into the 'Success' status, and tests the specified container log against the given expected output using a regexp matcher.

func (*Framework) WaitForPodNoLongerRunning 

func (f *Framework) WaitForPodNoLongerRunning(podName string) error

WaitForPodNoLongerRunning waits for the pod to no longer be running in the namespace, for either success or failure.

func (*Framework) WaitForPodNotFound 

func (f *Framework) WaitForPodNotFound(podName string, timeout time.Duration) error

WaitForPodNotFound waits for the pod to be completely terminated (not "Get-able").

func (*Framework) WaitForPodReady 

func (f *Framework) WaitForPodReady(podName string) error

WaitForPodReady waits for the pod to flip to ready in the namespace.

func (*Framework) WaitForPodRunning 

func (f *Framework) WaitForPodRunning(podName string) error

WaitForPodRunning waits for the pod to run in the namespace.

func (*Framework) WaitForPodRunningSlow 

func (f *Framework) WaitForPodRunningSlow(podName string) error

WaitForPodRunningSlow waits for the pod to run in the namespace. It has a longer timeout then WaitForPodRunning (util.slowPodStartTimeout).

func (*Framework) WaitForPodTerminated 

func (f *Framework) WaitForPodTerminated(podName, reason string) error

WaitForPodTerminated waits for the pod to be terminated with the given reason.

func (*Framework) WriteFileViaContainer 

func (f *Framework) WriteFileViaContainer(podName, containerName string, path string, contents string) error

WriteFileViaContainer writes a file using kubectl exec echo <contents> > <path> via specified container because of the primitive technique we're using here, we only allow ASCII alphanumeric characters

type HTTPPokeParams 

type HTTPPokeParams struct {
	Timeout        time.Duration
	ExpectCode     int // default = 200
	BodyContains   string
	RetriableCodes []int
}

HTTPPokeParams is a struct for HTTP poke parameters.

type HTTPPokeResult 

type HTTPPokeResult struct {
	Status HTTPPokeStatus
	Code   int    // HTTP code: 0 if the connection was not made
	Error  error  // if there was any error
	Body   []byte // if code != 0
}

HTTPPokeResult is a struct for HTTP poke result.

func PokeHTTP 

func PokeHTTP(host string, port int, path string, params *HTTPPokeParams) HTTPPokeResult

PokeHTTP tries to connect to a host on a port for a given URL path. Callers can specify additional success parameters, if desired.

The result status will be characterized as precisely as possible, given the known users of this.

The result code will be zero in case of any failure to connect, or non-zero if the HTTP transaction completed (even if the other test params make this a failure).

The result error will be populated for any status other than Success.

The result body will be populated if the HTTP transaction was completed, even if the other test params make this a failure).

type HTTPPokeStatus 

type HTTPPokeStatus string

HTTPPokeStatus is string for representing HTTP poke status. 

const (
	// HTTPSuccess is HTTP poke status which is success.
	HTTPSuccess HTTPPokeStatus = "Success"
	// HTTPError is HTTP poke status which is error.
	HTTPError HTTPPokeStatus = "UnknownError"
	// HTTPTimeout is HTTP poke status which is timeout.
	HTTPTimeout HTTPPokeStatus = "TimedOut"
	// HTTPRefused is HTTP poke status which is connection refused.
	HTTPRefused HTTPPokeStatus = "ConnectionRefused"
	// HTTPRetryCode is HTTP poke status which is retry code.
	HTTPRetryCode HTTPPokeStatus = "RetryCode"
	// HTTPWrongCode is HTTP poke status which is wrong code.
	HTTPWrongCode HTTPPokeStatus = "WrongCode"
	// HTTPBadResponse is HTTP poke status which is bad response.
	HTTPBadResponse HTTPPokeStatus = "BadResponse"
)

type InvariantFunc 

type InvariantFunc func(older, newer runtime.Object) error

InvariantFunc is a func that checks for invariant.

type ItemFactory 

type ItemFactory interface {
	// New returns a new empty item.
	New() runtime.Object

	// Create is responsible for creating the item. It returns an
	// error or a cleanup function for the created item.
	// If the item is of an unsupported type, it must return
	// an error that has errorItemNotSupported as cause.
	Create(f *Framework, item interface{}) (func() error, error)
}

ItemFactory provides support for creating one particular item. The type gets exported because other packages might want to extend the set of pre-defined factories.

type KubeCluster 

type KubeCluster struct {
	Name    string `yaml:"name"`
	Cluster struct {
		CertificateAuthorityData string `yaml:"certificate-authority-data"`
		Server                   string `yaml:"server"`
	} `yaml:"cluster"`
}

KubeCluster is a struct for managing kubernetes cluster info.

type KubeConfig 

type KubeConfig struct {
	Contexts []struct {
		Name    string `yaml:"name"`
		Context struct {
			Cluster string `yaml:"cluster"`
			User    string
		} `yaml:"context"`
	} `yaml:"contexts"`

	Clusters []KubeCluster `yaml:"clusters"`

	Users []KubeUser `yaml:"users"`
}

KubeConfig is a struct for managing kubernetes config.

func (*KubeConfig) FindCluster 

func (kc *KubeConfig) FindCluster(name string) *KubeCluster

FindCluster returns cluster info which is the specified cluster name.

func (*KubeConfig) FindUser 

func (kc *KubeConfig) FindUser(name string) *KubeUser

FindUser returns user info which is the specified user name.

type KubeUser 

type KubeUser struct {
	Name string `yaml:"name"`
	User struct {
		Username string `yaml:"username"`
		Password string `yaml:"password"`
		Token    string `yaml:"token"`
	} `yaml:"user"`
}

KubeUser is a struct for managing kubernetes user info.

type KubectlBuilder 

type KubectlBuilder struct {
	// contains filtered or unexported fields
}

KubectlBuilder is used to build, customize and execute a kubectl Command. Add more functions to customize the builder as needed.

func NewKubectlCommand 

func NewKubectlCommand(args ...string) *KubectlBuilder

NewKubectlCommand returns a KubectlBuilder for running kubectl.

func (KubectlBuilder) Exec 

func (b KubectlBuilder) Exec() (string, error)

Exec runs the kubectl executable.

func (KubectlBuilder) ExecOrDie 

func (b KubectlBuilder) ExecOrDie() string

ExecOrDie runs the kubectl executable or dies if error occurs.

func (*KubectlBuilder) WithEnv 

func (b *KubectlBuilder) WithEnv(env []string) *KubectlBuilder

WithEnv sets the given environment and returns itself.

func (KubectlBuilder) WithStdinData 

func (b KubectlBuilder) WithStdinData(data string) *KubectlBuilder

WithStdinData sets the given data to stdin and returns itself.

func (KubectlBuilder) WithStdinReader 

func (b KubectlBuilder) WithStdinReader(reader io.Reader) *KubectlBuilder

WithStdinReader sets the given reader and returns itself.

func (*KubectlBuilder) WithTimeout 

func (b *KubectlBuilder) WithTimeout(t <-chan time.Time) *KubectlBuilder

WithTimeout sets the given timeout and returns itself.

type KubemarkResourceUsage 

type KubemarkResourceUsage struct {
	Name                    string
	MemoryWorkingSetInBytes uint64
	CPUUsageInCores         float64
}

KubemarkResourceUsage is a struct for tracking the resource usage of kubemark.

type LogSizeDataTimeseries 

type LogSizeDataTimeseries map[string]map[string][]TimestampedSize

LogSizeDataTimeseries is map of timestamped size.

type LogSizeGatherer 

type LogSizeGatherer struct {
	// contains filtered or unexported fields
}

LogSizeGatherer is a worker which grabs a WorkItem from the channel and does assigned work.

func (*LogSizeGatherer) Run 

func (g *LogSizeGatherer) Run()

Run starts log size gathering.

func (*LogSizeGatherer) Work 

func (g *LogSizeGatherer) Work() bool

Work does a single unit of work: tries to take out a WorkItem from the queue, ssh-es into a given machine, gathers data, writes it to the shared <data> map, and creates a gorouting which reinserts work item into the queue with a <pollingPeriod> delay. Returns false if worker should exit.

type LogsSizeData 

type LogsSizeData struct {
	// contains filtered or unexported fields
}

LogsSizeData is a structure for handling timeseries of log size data and lock.

type LogsSizeDataSummary 

type LogsSizeDataSummary map[string]map[string]SingleLogSummary

LogsSizeDataSummary is map of log summary. node -> file -> data

func (*LogsSizeDataSummary) PrintHumanReadable 

func (s *LogsSizeDataSummary) PrintHumanReadable() string

PrintHumanReadable returns string of log size data summary. TODO: make sure that we don't need locking here

func (*LogsSizeDataSummary) PrintJSON 

func (s *LogsSizeDataSummary) PrintJSON() string

PrintJSON returns the summary of log size data with JSON format.

func (*LogsSizeDataSummary) SummaryKind 

func (s *LogsSizeDataSummary) SummaryKind() string

SummaryKind returns the summary of log size data summary.

type LogsSizeVerifier 

type LogsSizeVerifier struct {
	// contains filtered or unexported fields
}

LogsSizeVerifier gathers data about log files sizes from master and node machines. It oversees a <workersNo> workers which do the gathering.

func NewLogsVerifier 

func NewLogsVerifier(c clientset.Interface, stopChannel chan bool) *LogsSizeVerifier

NewLogsVerifier creates a new LogsSizeVerifier which will stop when stopChannel is closed

func (*LogsSizeVerifier) GetSummary 

func (s *LogsSizeVerifier) GetSummary() *LogsSizeDataSummary

GetSummary returns a summary (average generation rate and number of probes) of the data gathered by LogSizeVerifier

func (*LogsSizeVerifier) Run 

func (s *LogsSizeVerifier) Run()

Run starts log size gathering. It starts a gorouting for every worker and then blocks until stopChannel is closed

type NetworkingTestConfig 

type NetworkingTestConfig struct {
	// TestContaienrPod is a test pod running the netexec image. It is capable
	// of executing tcp/udp requests against ip:port.
	TestContainerPod *v1.Pod
	// HostTestContainerPod is a pod running using the hostexec image.
	HostTestContainerPod *v1.Pod
	// if the HostTestContainerPod is running with HostNetwork=true.
	HostNetwork bool
	// EndpointPods are the pods belonging to the Service created by this
	// test config. Each invocation of `setup` creates a service with
	// 1 pod per node running the netexecImage.
	EndpointPods []*v1.Pod

	// NodePortService is a Service with Type=NodePort spanning over all
	// endpointPods.
	NodePortService *v1.Service
	// SessionAffinityService is a Service with SessionAffinity=ClientIP
	// spanning over all endpointPods.
	SessionAffinityService *v1.Service
	// ExternalAddrs is a list of external IPs of nodes in the cluster.
	ExternalAddrs []string
	// Nodes is a list of nodes in the cluster.
	Nodes []v1.Node
	// MaxTries is the number of retries tolerated for tests run against
	// endpoints and services created by this config.
	MaxTries int
	// The ClusterIP of the Service reated by this test config.
	ClusterIP string
	// External ip of first node for use in nodePort testing.
	NodeIP string
	// The http/udp nodePorts of the Service.
	NodeHTTPPort int
	NodeUDPPort  int
	// The kubernetes namespace within which all resources for this
	// config are created
	Namespace string
	// contains filtered or unexported fields
}

NetworkingTestConfig is a convenience class around some utility methods for testing kubeproxy/networking/services/endpoints.

func NewCoreNetworkingTestConfig 

func NewCoreNetworkingTestConfig(f *Framework, hostNetwork bool) *NetworkingTestConfig

NewCoreNetworkingTestConfig creates and sets up a new test config helper for Node E2E.

func NewNetworkingTestConfig 

func NewNetworkingTestConfig(f *Framework) *NetworkingTestConfig

NewNetworkingTestConfig creates and sets up a new test config helper.

func (*NetworkingTestConfig) DeleteNetProxyPod 

func (config *NetworkingTestConfig) DeleteNetProxyPod()

DeleteNetProxyPod deletes the first endpoint pod and waits for it being removed.

func (*NetworkingTestConfig) DeleteNodePortService 

func (config *NetworkingTestConfig) DeleteNodePortService()

DeleteNodePortService deletes NodePort service.

func (*NetworkingTestConfig) DialFromContainer 

func (config *NetworkingTestConfig) DialFromContainer(protocol, containerIP, targetIP string, containerHTTPPort, targetPort, maxTries, minTries int, expectedEps sets.String)

DialFromContainer executes a curl via kubectl exec in a test container, which might then translate to a tcp or udp request based on the protocol argument in the url.

  • minTries is the minimum number of curl attempts required before declaring success. Set to 0 if you'd like to return as soon as all endpoints respond at least once.
  • maxTries is the maximum number of curl attempts. If this many attempts pass and we don't see all expected endpoints, the test fails.
  • expectedEps is the set of endpointnames to wait for. Typically this is also the hostname reported by each pod in the service through /hostName.

maxTries == minTries will confirm that we see the expected endpoints and no more for maxTries. Use this if you want to eg: fail a readiness check on a pod and confirm it doesn't show up as an endpoint.

func (*NetworkingTestConfig) DialFromEndpointContainer 

func (config *NetworkingTestConfig) DialFromEndpointContainer(protocol, targetIP string, targetPort, maxTries, minTries int, expectedEps sets.String)

DialFromEndpointContainer executes a curl via kubectl exec in an endpoint container.

func (*NetworkingTestConfig) DialFromNode 

func (config *NetworkingTestConfig) DialFromNode(protocol, targetIP string, targetPort, maxTries, minTries int, expectedEps sets.String)

DialFromNode executes a tcp or udp request based on protocol via kubectl exec in a test container running with host networking.

  • minTries is the minimum number of curl attempts required before declaring success. Set to 0 if you'd like to return as soon as all endpoints respond at least once.
  • maxTries is the maximum number of curl attempts. If this many attempts pass and we don't see all expected endpoints, the test fails.

maxTries == minTries will confirm that we see the expected endpoints and no more for maxTries. Use this if you want to eg: fail a readiness check on a pod and confirm it doesn't show up as an endpoint.

func (*NetworkingTestConfig) DialFromTestContainer 

func (config *NetworkingTestConfig) DialFromTestContainer(protocol, targetIP string, targetPort, maxTries, minTries int, expectedEps sets.String)

DialFromTestContainer executes a curl via kubectl exec in a test container.

func (*NetworkingTestConfig) EndpointHostnames 

func (config *NetworkingTestConfig) EndpointHostnames() sets.String

EndpointHostnames returns a set of hostnames for existing endpoints.

func (*NetworkingTestConfig) GetEndpointsFromContainer 

func (config *NetworkingTestConfig) GetEndpointsFromContainer(protocol, containerIP, targetIP string, containerHTTPPort, targetPort, tries int) (sets.String, error)

GetEndpointsFromContainer executes a curl via kubectl exec in a test container, which might then translate to a tcp or udp request based on the protocol argument in the url. It returns all different endpoints from multiple retries.

  • tries is the number of curl attempts. If this many attempts pass and we don't see any endpoints, the test fails.

func (*NetworkingTestConfig) GetEndpointsFromTestContainer 

func (config *NetworkingTestConfig) GetEndpointsFromTestContainer(protocol, targetIP string, targetPort, tries int) (sets.String, error)

GetEndpointsFromTestContainer executes a curl via kubectl exec in a test container.

func (*NetworkingTestConfig) GetSelfURL 

func (config *NetworkingTestConfig) GetSelfURL(port int32, path string, expected string)

GetSelfURL executes a curl against the given path via kubectl exec into a test container running with host networking, and fails if the output doesn't match the expected string.

func (*NetworkingTestConfig) GetSelfURLStatusCode 

func (config *NetworkingTestConfig) GetSelfURLStatusCode(port int32, path string, expected string)

GetSelfURLStatusCode executes a curl against the given path via kubectl exec into a test container running with host networking, and fails if the returned status code doesn't match the expected string.

type NodeKiller 

type NodeKiller struct {
	// contains filtered or unexported fields
}

NodeKiller is a utility to simulate node failures.

func NewNodeKiller 

func NewNodeKiller(config NodeKillerConfig, client clientset.Interface, provider string) *NodeKiller

NewNodeKiller creates new NodeKiller.

func (*NodeKiller) Run 

func (k *NodeKiller) Run(stopCh <-chan struct{})

Run starts NodeKiller until stopCh is closed.

type NodeKillerConfig 

type NodeKillerConfig struct {
	// Enabled determines whether NodeKill should do anything at all.
	// All other options below are ignored if Enabled = false.
	Enabled bool
	// FailureRatio is a percentage of all nodes that could fail simultinously.
	FailureRatio float64
	// Interval is time between node failures.
	Interval time.Duration
	// JitterFactor is factor used to jitter node failures.
	// Node will be killed between [Interval, Interval + (1.0 + JitterFactor)].
	JitterFactor float64
	// SimulatedDowntime is a duration between node is killed and recreated.
	SimulatedDowntime time.Duration
	// NodeKillerStopCh is a channel that is used to notify NodeKiller to stop killing nodes.
	NodeKillerStopCh chan struct{}
}

NodeKillerConfig describes configuration of NodeKiller -- a utility to simulate node failures.

type NodeTestContextType 

type NodeTestContextType struct {
	// NodeE2E indicates whether it is running node e2e.
	NodeE2E bool
	// Name of the node to run tests on.
	NodeName string
	// NodeConformance indicates whether the test is running in node conformance mode.
	NodeConformance bool
	// PrepullImages indicates whether node e2e framework should prepull images.
	PrepullImages bool
	// KubeletConfig is the kubelet configuration the test is running against.
	KubeletConfig kubeletconfig.KubeletConfiguration
	// ImageDescription is the description of the image on which the test is running.
	ImageDescription string
	// SystemSpecName is the name of the system spec (e.g., gke) that's used in
	// the node e2e test. If empty, the default one (system.DefaultSpec) is
	// used. The system specs are in test/e2e_node/system/specs/.
	SystemSpecName string
	// ExtraEnvs is a map of environment names to values.
	ExtraEnvs map[string]string
}

NodeTestContextType is part of TestContextType, it is shared by all node e2e test.

type NodesSet 

type NodesSet int

NodesSet is a value of nodes set. 

const (
	// AllNodes means all containers on all nodes.
	AllNodes NodesSet = 0
	// MasterNodes means all containers on Master nodes only.
	MasterNodes NodesSet = 1
	// MasterAndDNSNodes means all containers on Master nodes and DNS containers on other nodes.
	MasterAndDNSNodes NodesSet = 2
)

type NullProvider 

type NullProvider struct{}

NullProvider is the default implementation of the ProviderInterface which doesn't do anything.

func (NullProvider) CleanupServiceResources 

func (n NullProvider) CleanupServiceResources(c clientset.Interface, loadBalancerName, region, zone string)

CleanupServiceResources is a base implementation which cleans up service resources.

func (NullProvider) CreatePD 

func (n NullProvider) CreatePD(zone string) (string, error)

CreatePD is a base implementation which creates PD.

func (NullProvider) CreatePVSource 

func (n NullProvider) CreatePVSource(zone, diskName string) (*v1.PersistentVolumeSource, error)

CreatePVSource is a base implementation which creates PV source.

func (NullProvider) DeleteNode 

func (n NullProvider) DeleteNode(node *v1.Node) error

DeleteNode is a base implementation which deletes a node.

func (NullProvider) DeletePD 

func (n NullProvider) DeletePD(pdName string) error

DeletePD is a base implementation which deletes PD.

func (NullProvider) DeletePVSource 

func (n NullProvider) DeletePVSource(pvSource *v1.PersistentVolumeSource) error

DeletePVSource is a base implementation which deletes PV source.

func (NullProvider) EnableAndDisableInternalLB 

func (n NullProvider) EnableAndDisableInternalLB() (enable, disable func(svc *v1.Service))

EnableAndDisableInternalLB is a base implementation which returns functions for enabling/disabling an internal LB.

func (NullProvider) EnsureLoadBalancerResourcesDeleted 

func (n NullProvider) EnsureLoadBalancerResourcesDeleted(ip, portRange string) error

EnsureLoadBalancerResourcesDeleted is a base implementation which ensures load balancer is deleted.

func (NullProvider) FrameworkAfterEach 

func (n NullProvider) FrameworkAfterEach(f *Framework)

FrameworkAfterEach is a base implementation which does AfterEach.

func (NullProvider) FrameworkBeforeEach 

func (n NullProvider) FrameworkBeforeEach(f *Framework)

FrameworkBeforeEach is a base implementation which does BeforeEach.

func (NullProvider) GetGroupNodes 

func (n NullProvider) GetGroupNodes(group string) ([]string, error)

GetGroupNodes is a base implementation which returns group nodes.

func (NullProvider) GroupSize 

func (n NullProvider) GroupSize(group string) (int, error)

GroupSize returns the size of an instance group

func (NullProvider) LoadBalancerSrcRanges 

func (n NullProvider) LoadBalancerSrcRanges() []string

LoadBalancerSrcRanges is a base implementation which returns the ranges of ips used by load balancers.

func (NullProvider) ResizeGroup 

func (n NullProvider) ResizeGroup(string, int32) error

ResizeGroup is a base implementation which resizes group.

type Options 

type Options struct {
	ClientQPS    float32
	ClientBurst  int
	GroupVersion *schema.GroupVersion
}

Options is a struct for managing test framework options.

type PVCMap 

type PVCMap map[types.NamespacedName]pvcval

PVCMap is a map of all PVCs used in the multi pv-pvc tests. The key is "namespace/pvc.Name". The value is {} (empty struct) since we're only interested in the PVC's name and if it is present. We must always Get the pvc object before referencing any of its values, eg. its VolumeName. Note: It's unsafe to add keys to a map in a loop. Their insertion in the map is 

unpredictable and can result in the same key being iterated over again.

type PVMap 

type PVMap map[string]pvval

PVMap is a map of all PVs used in the multi pv-pvc tests. The key is the PV's name, which is guaranteed to be unique. The value is {} (empty struct) since we're only interested in the PV's name and if it is present. We must always Get the pv object before referencing any of its values, eg its ClaimRef.

type PersistentVolumeClaimConfig 

type PersistentVolumeClaimConfig struct {
	// NamePrefix defaults to "pvc-" if unspecified
	NamePrefix string
	// ClaimSize must be specified in the Quantity format. Defaults to 2Gi if
	// unspecified
	ClaimSize string
	// AccessModes defaults to RWO if unspecified
	AccessModes      []v1.PersistentVolumeAccessMode
	Annotations      map[string]string
	Selector         *metav1.LabelSelector
	StorageClassName *string
	// VolumeMode defaults to nil if unspecified or specified as the empty
	// string
	VolumeMode *v1.PersistentVolumeMode
}

PersistentVolumeClaimConfig is consumed by MakePersistentVolumeClaim() to generate a PVC object.

type PersistentVolumeConfig 

type PersistentVolumeConfig struct {
	// [Optional] NamePrefix defaults to "pv-" if unset
	NamePrefix string
	// [Optional] Labels contains information used to organize and categorize
	// objects
	Labels labels.Set
	// PVSource contains the details of the underlying volume and must be set
	PVSource v1.PersistentVolumeSource
	// [Optional] Prebind lets you specify a PVC to bind this PV to before
	// creation
	Prebind *v1.PersistentVolumeClaim
	// [Optiona] ReclaimPolicy defaults to "Reclaim" if unset
	ReclaimPolicy    v1.PersistentVolumeReclaimPolicy
	StorageClassName string
	// [Optional] NodeAffinity defines constraints that limit what nodes this
	// volume can be accessed from.
	NodeAffinity *v1.VolumeNodeAffinity
	// [Optional] VolumeMode defaults to "Filesystem" if unset
	VolumeMode *v1.PersistentVolumeMode
	// [Optional] AccessModes defaults to RWO if unset
	AccessModes []v1.PersistentVolumeAccessMode
	// [Optional] Capacity is the storage capacity in Quantity format. Defaults
	// to "2Gi" if unset
	Capacity string
}

PersistentVolumeConfig is consumed by MakePersistentVolume() to generate a PV object for varying storage options (NFS, ceph, glusterFS, etc.). (+optional) prebind holds a pre-bound PVC Example pvSource: 

pvSource: api.PersistentVolumeSource{
	NFS: &api.NFSVolumeSource{
 		...
 	},
 }

type PodClient 

type PodClient struct {
	v1core.PodInterface
	// contains filtered or unexported fields
}

PodClient is a struct for pod client.

func (*PodClient) Create 

func (c *PodClient) Create(pod *v1.Pod) *v1.Pod

Create creates a new pod according to the framework specifications (don't wait for it to start).

func (*PodClient) CreateBatch 

func (c *PodClient) CreateBatch(pods []*v1.Pod) []*v1.Pod

CreateBatch create a batch of pods. All pods are created before waiting.

func (*PodClient) CreateEventually 

func (c *PodClient) CreateEventually(pod *v1.Pod, opts ...interface{}) *v1.Pod

CreateEventually retries pod creation for a while before failing the test with the most recent error. This mimicks the behavior of a controller (like the one for DaemonSet) and is necessary because pod creation can fail while its service account is still getting provisioned (https://github.com/kubernetes/kubernetes/issues/68776).

Both the timeout and polling interval are configurable as optional arguments: - The first optional argument is the timeout. - The second optional argument is the polling interval.

Both intervals can either be specified as time.Duration, parsable duration strings or as floats/integers. In the last case they are interpreted as seconds.

func (*PodClient) CreateSync 

func (c *PodClient) CreateSync(pod *v1.Pod) *v1.Pod

CreateSync creates a new pod according to the framework specifications, and wait for it to start.

func (*PodClient) CreateSyncInNamespace 

func (c *PodClient) CreateSyncInNamespace(pod *v1.Pod, namespace string) *v1.Pod

CreateSyncInNamespace creates a new pod according to the framework specifications in the given namespace, and waits for it to start.

func (*PodClient) DeleteSync 

func (c *PodClient) DeleteSync(name string, options *metav1.DeleteOptions, timeout time.Duration)

DeleteSync deletes the pod and wait for the pod to disappear for `timeout`. If the pod doesn't disappear before the timeout, it will fail the test.

func (*PodClient) DeleteSyncInNamespace 

func (c *PodClient) DeleteSyncInNamespace(name string, namespace string, options *metav1.DeleteOptions, timeout time.Duration)

DeleteSyncInNamespace deletes the pod from the namespace and wait for the pod to disappear for `timeout`. If the pod doesn't disappear before the timeout, it will fail the test.

func (*PodClient) MatchContainerOutput 

func (c *PodClient) MatchContainerOutput(name string, containerName string, expectedRegexp string) error

MatchContainerOutput gets output of a container and match expected regexp in the output.

func (*PodClient) PodIsReady 

func (c *PodClient) PodIsReady(name string) bool

PodIsReady returns true if the specified pod is ready. Otherwise false.

func (*PodClient) Update 

func (c *PodClient) Update(name string, updateFn func(pod *v1.Pod))

Update updates the pod object. It retries if there is a conflict, throw out error if there is any other errors. name is the pod name, updateFn is the function updating the pod object.

func (*PodClient) WaitForErrorEventOrSuccess 

func (c *PodClient) WaitForErrorEventOrSuccess(pod *v1.Pod) (*v1.Event, error)

WaitForErrorEventOrSuccess waits for pod to succeed or an error event for that pod.

func (*PodClient) WaitForFailure 

func (c *PodClient) WaitForFailure(name string, timeout time.Duration)

WaitForFailure waits for pod to fail.

func (*PodClient) WaitForFinish 

func (c *PodClient) WaitForFinish(name string, timeout time.Duration)

WaitForFinish waits for pod to finish running, regardless of success or failure.

func (*PodClient) WaitForSuccess 

func (c *PodClient) WaitForSuccess(name string, timeout time.Duration)

WaitForSuccess waits for pod to succeed. TODO(random-liu): Move pod wait function into this file

type PodStateVerification 

type PodStateVerification struct {
	// Optional: only pods that have k=v labels will pass this filter.
	Selectors map[string]string

	// Required: The phases which are valid for your pod.
	ValidPhases []v1.PodPhase

	// Optional: only pods passing this function will pass the filter
	// Verify a pod.
	// As an optimization, in addition to specifying filter (boolean),
	// this function allows specifying an error as well.
	// The error indicates that the polling of the pod spectrum should stop.
	Verify func(v1.Pod) (bool, error)

	// Optional: only pods with this name will pass the filter.
	PodName string
}

PodStateVerification represents a verification of pod state. Any time you have a set of pods that you want to operate against or query, this struct can be used to declaratively identify those pods.

type ProviderInterface 

type ProviderInterface interface {
	FrameworkBeforeEach(f *Framework)
	FrameworkAfterEach(f *Framework)

	ResizeGroup(group string, size int32) error
	GetGroupNodes(group string) ([]string, error)
	GroupSize(group string) (int, error)

	DeleteNode(node *v1.Node) error

	CreatePD(zone string) (string, error)
	DeletePD(pdName string) error
	CreatePVSource(zone, diskName string) (*v1.PersistentVolumeSource, error)
	DeletePVSource(pvSource *v1.PersistentVolumeSource) error

	CleanupServiceResources(c clientset.Interface, loadBalancerName, region, zone string)

	EnsureLoadBalancerResourcesDeleted(ip, portRange string) error
	LoadBalancerSrcRanges() []string
	EnableAndDisableInternalLB() (enable, disable func(svc *v1.Service))
}

ProviderInterface contains the implementation for certain provider-specific functionality.

func SetupProviderConfig 

func SetupProviderConfig(providerName string) (ProviderInterface, error)

SetupProviderConfig validates the chosen provider and creates an interface instance for it.

type ResourceConstraint 

type ResourceConstraint struct {
	CPUConstraint    float64
	MemoryConstraint uint64
}

ResourceConstraint is a struct to hold constraints.

type ResourceGathererOptions 

type ResourceGathererOptions struct {
	InKubemark                  bool
	Nodes                       NodesSet
	ResourceDataGatheringPeriod time.Duration
	ProbeDuration               time.Duration
	PrintVerboseLogs            bool
}

ResourceGathererOptions is a struct to hold options for resource.

type ResourceUsageSummary 

type ResourceUsageSummary map[string][]SingleContainerSummary

ResourceUsageSummary is a struct to hold resource usage summary. we can't have int here, as JSON does not accept integer keys.

func (*ResourceUsageSummary) PrintHumanReadable 

func (s *ResourceUsageSummary) PrintHumanReadable() string

PrintHumanReadable prints resource usage summary in human readable.

func (*ResourceUsageSummary) PrintJSON 

func (s *ResourceUsageSummary) PrintJSON() string

PrintJSON prints resource usage summary in JSON.

func (*ResourceUsageSummary) SummaryKind 

func (s *ResourceUsageSummary) SummaryKind() string

SummaryKind returns string of ResourceUsageSummary

type SingleContainerSummary 

type SingleContainerSummary struct {
	Name string
	CPU  float64
	Mem  uint64
}

SingleContainerSummary is a struct to hold single container summary.

type SingleLogSummary 

type SingleLogSummary struct {
	AverageGenerationRate int
	NumberOfProbes        int
}

SingleLogSummary is a structure for handling average generation rate and number of probes.

type TestContextType 

type TestContextType struct {
	KubeConfig         string
	KubeContext        string
	KubeAPIContentType string
	KubeVolumeDir      string
	CertDir            string
	Host               string
	// TODO: Deprecating this over time... instead just use gobindata_util.go , see #23987.
	RepoRoot                string
	DockershimCheckpointDir string
	// ListImages will list off all images that are used then quit
	ListImages bool

	// Provider identifies the infrastructure provider (gce, gke, aws)
	Provider string

	// Tooling is the tooling in use (e.g. kops, gke).  Provider is the cloud provider and might not uniquely identify the tooling.
	Tooling string

	CloudConfig    CloudConfig
	KubectlPath    string
	OutputDir      string
	ReportDir      string
	ReportPrefix   string
	Prefix         string
	MinStartupPods int
	// Timeout for waiting for system pods to be running
	SystemPodsStartupTimeout    time.Duration
	EtcdUpgradeStorage          string
	EtcdUpgradeVersion          string
	GCEUpgradeScript            string
	ContainerRuntime            string
	ContainerRuntimeEndpoint    string
	ContainerRuntimeProcessName string
	ContainerRuntimePidFile     string
	// SystemdServices are comma separated list of systemd services the test framework
	// will dump logs for.
	SystemdServices string
	// DumpSystemdJournal controls whether to dump the full systemd journal.
	DumpSystemdJournal       bool
	ImageServiceEndpoint     string
	MasterOSDistro           string
	NodeOSDistro             string
	VerifyServiceAccount     bool
	DeleteNamespace          bool
	DeleteNamespaceOnFailure bool
	AllowedNotReadyNodes     int
	CleanStart               bool
	// If set to 'true' or 'all' framework will start a goroutine monitoring resource usage of system add-ons.
	// It will read the data every 30 seconds from all Nodes and print summary during afterEach. If set to 'master'
	// only master Node will be monitored.
	GatherKubeSystemResourceUsageData string
	GatherLogsSizes                   bool
	GatherMetricsAfterTest            string
	GatherSuiteMetricsAfterTest       bool
	MaxNodesToGather                  int
	AllowGatheringProfiles            bool
	// If set to 'true' framework will gather ClusterAutoscaler metrics when gathering them for other components.
	IncludeClusterAutoscalerMetrics bool
	// Currently supported values are 'hr' for human-readable and 'json'. It's a comma separated list.
	OutputPrintType string
	// NodeSchedulableTimeout is the timeout for waiting for all nodes to be schedulable.
	NodeSchedulableTimeout time.Duration
	// SystemDaemonsetStartupTimeout is the timeout for waiting for all system daemonsets to be ready.
	SystemDaemonsetStartupTimeout time.Duration
	// CreateTestingNS is responsible for creating namespace used for executing e2e tests.
	// It accepts namespace base name, which will be prepended with e2e prefix, kube client
	// and labels to be applied to a namespace.
	CreateTestingNS CreateTestingNSFn
	// If set to true test will dump data about the namespace in which test was running.
	DumpLogsOnFailure bool
	// Disables dumping cluster log from master and nodes after all tests.
	DisableLogDump bool
	// Path to the GCS artifacts directory to dump logs from nodes. Logexporter gets enabled if this is non-empty.
	LogexporterGCSPath string
	// featureGates is a map of feature names to bools that enable or disable alpha/experimental features.
	FeatureGates map[string]bool
	// Node e2e specific test context
	NodeTestContextType
	// Monitoring solution that is used in current cluster.
	ClusterMonitoringMode string
	// Separate Prometheus monitoring deployed in cluster
	EnablePrometheusMonitoring bool

	// Indicates what path the kubernetes-anywhere is installed on
	KubernetesAnywherePath string

	// The DNS Domain of the cluster.
	ClusterDNSDomain string

	// The configuration of NodeKiller.
	NodeKiller NodeKillerConfig

	// The Default IP Family of the cluster ("ipv4" or "ipv6")
	IPFamily string
}

TestContextType contains test settings and global state. Due to historic reasons, it is a mixture of items managed by the test framework itself, cloud providers and individual tests. The goal is to move anything not required by the framework into the code which uses the settings.

The recommendation for those settings is:

  • They are stored in their own context structure or local variables.
  • The standard `flag` package is used to register them. The flag name should follow the pattern <part1>.<part2>....<partn> where the prefix is unlikely to conflict with other tests or standard packages and each part is in lower camel case. For example, test/e2e/storage/csi/context.go could define storage.csi.numIterations.
  • framework/config can be used to simplify the registration of multiple options with a single function call: var storageCSI { NumIterations `default:"1" usage:"number of iterations"` } _ config.AddOptions(&storageCSI, "storage.csi")
  • The direct use Viper in tests is possible, but discouraged because it only works in test suites which use Viper (which is not required) and the supported options cannot be discovered by a test suite user.

Test suite authors can use framework/viper to make all command line parameters also configurable via a configuration file. 

var TestContext TestContextType

TestContext should be used by all tests to access common context data.

type TestDataSummary 

type TestDataSummary interface {
	SummaryKind() string
	PrintHumanReadable() string
	PrintJSON() string
}

TestDataSummary is an interface for managing test data.

type TimestampedSize 

type TimestampedSize struct {
	// contains filtered or unexported fields
}

TimestampedSize contains a size together with a time of measurement.

type UDPPokeParams 

type UDPPokeParams struct {
	Timeout  time.Duration
	Response string
}

UDPPokeParams is a struct for UDP poke parameters.

type UDPPokeResult 

type UDPPokeResult struct {
	Status   UDPPokeStatus
	Error    error  // if there was any error
	Response []byte // if code != 0
}

UDPPokeResult is a struct for UDP poke result.

func PokeUDP 

func PokeUDP(host string, port int, request string, params *UDPPokeParams) UDPPokeResult

PokeUDP tries to connect to a host on a port and send the given request. Callers can specify additional success parameters, if desired.

The result status will be characterized as precisely as possible, given the known users of this.

The result error will be populated for any status other than Success.

The result response will be populated if the UDP transaction was completed, even if the other test params make this a failure).

type UDPPokeStatus 

type UDPPokeStatus string

UDPPokeStatus is string for representing UDP poke status. 

const (
	// UDPSuccess is UDP poke status which is success.
	UDPSuccess UDPPokeStatus = "Success"
	// UDPError is UDP poke status which is error.
	UDPError UDPPokeStatus = "UnknownError"
	// UDPTimeout is UDP poke status which is timeout.
	UDPTimeout UDPPokeStatus = "TimedOut"
	// UDPRefused is UDP poke status which is connection refused.
	UDPRefused UDPPokeStatus = "ConnectionRefused"
	// UDPBadResponse is UDP poke status which is bad response.
	UDPBadResponse UDPPokeStatus = "BadResponse"
)

type What 

type What struct {
	Kind string `json:"kind"`
}

What is a subset of metav1.TypeMeta which (in contrast to metav1.TypeMeta itself) satisfies the runtime.Object interface.

func (*What) DeepCopy 

func (in *What) DeepCopy() *What

DeepCopy is an autogenerated deepcopy function, copying the receiver, creating a new What.

func (*What) DeepCopyInto 

func (in *What) DeepCopyInto(out *What)

DeepCopyInto is an autogenerated deepcopy function, copying the receiver, writing into out.

func (*What) DeepCopyObject 

func (in *What) DeepCopyObject() runtime.Object

DeepCopyObject is an autogenerated deepcopy function, copying the receiver, creating a new runtime.Object.

func (*What) GetObjectKind 

func (in *What) GetObjectKind() schema.ObjectKind

GetObjectKind returns the ObjectKind schema

type WorkItem 

type WorkItem struct {
	// contains filtered or unexported fields
}

WorkItem is a command for a worker that contains an IP of machine from which we want to gather data and paths to all files we're interested in.

Source Files

View all Source files

Directories

Path Synopsis
Package config simplifies the declaration of configuration options.
 Package config simplifies the declaration of configuration options.
Package ginkgowrapper wraps Ginkgo Fail and Skip functions to panic with structured data instead of a constant string.
 Package ginkgowrapper wraps Ginkgo Fail and Skip functions to panic with structured data instead of a constant string.
Package log should be removed after switching to use core framework log.
 Package log should be removed after switching to use core framework log.
Package podlogs enables live capturing of all events and log messages for some or all pods in a namespace as they get generated.
 Package podlogs enables live capturing of all events and log messages for some or all pods in a namespace as they get generated.
providers
aws
azure
gce
kubemark
openstack
vsphere
Package testfiles provides a wrapper around various optional ways of retrieving additional files needed during a test run: - builtin bindata - filesystem access
 Package testfiles provides a wrapper around various optional ways of retrieving additional files needed during a test run: - builtin bindata - filesystem access

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.