redshift

package
v0.6.3-0...-5db6fc1 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Jun 13, 2015 License: Apache-2.0 Imports: 4 Imported by: 0

Documentation

Overview

Package redshift provides a client for Amazon Redshift.

Index

Examples

Constants

This section is empty.

Variables

This section is empty.

Functions

This section is empty.

Types

type AccountWithRestoreAccess 

type AccountWithRestoreAccess struct {
	// The identifier of an AWS customer account authorized to restore a snapshot.
	AccountID *string `locationName:"AccountId" type:"string"`
	// contains filtered or unexported fields
}

Describes an AWS customer account authorized to restore a snapshot.

type AuthorizeClusterSecurityGroupIngressInput 

type AuthorizeClusterSecurityGroupIngressInput struct {
	// The IP range to be added the Amazon Redshift security group.
	CIDRIP *string `type:"string"`

	// The name of the security group to which the ingress rule is added.
	ClusterSecurityGroupName *string `type:"string" required:"true"`

	// The EC2 security group to be added the Amazon Redshift security group.
	EC2SecurityGroupName *string `type:"string"`

	// The AWS account number of the owner of the security group specified by the
	// EC2SecurityGroupName parameter. The AWS Access Key ID is not an acceptable
	// value.
	//
	//  Example: 111122223333
	EC2SecurityGroupOwnerID *string `locationName:"EC2SecurityGroupOwnerId" type:"string"`
	// contains filtered or unexported fields
}

???

type AuthorizeClusterSecurityGroupIngressOutput 

type AuthorizeClusterSecurityGroupIngressOutput struct {
	// Describes a security group.
	ClusterSecurityGroup *ClusterSecurityGroup `type:"structure"`
	// contains filtered or unexported fields
}

type AuthorizeSnapshotAccessInput 

type AuthorizeSnapshotAccessInput struct {
	// The identifier of the AWS customer account authorized to restore the specified
	// snapshot.
	AccountWithRestoreAccess *string `type:"string" required:"true"`

	// The identifier of the cluster the snapshot was created from. This parameter
	// is required if your IAM user has a policy containing a snapshot resource
	// element that specifies anything other than * for the cluster name.
	SnapshotClusterIdentifier *string `type:"string"`

	// The identifier of the snapshot the account is authorized to restore.
	SnapshotIdentifier *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

type AuthorizeSnapshotAccessOutput 

type AuthorizeSnapshotAccessOutput struct {
	// Describes a snapshot.
	Snapshot *Snapshot `type:"structure"`
	// contains filtered or unexported fields
}

type AvailabilityZone 

type AvailabilityZone struct {
	// The name of the availability zone.
	Name *string `type:"string"`
	// contains filtered or unexported fields
}

Describes an availability zone.

type Cluster 

type Cluster struct {
	// If true, major version upgrades will be applied automatically to the cluster
	// during the maintenance window.
	AllowVersionUpgrade *bool `type:"boolean"`

	// The number of days that automatic cluster snapshots are retained.
	AutomatedSnapshotRetentionPeriod *int64 `type:"integer"`

	// The name of the Availability Zone in which the cluster is located.
	AvailabilityZone *string `type:"string"`

	// The date and time that the cluster was created.
	ClusterCreateTime *time.Time `type:"timestamp" timestampFormat:"iso8601"`

	// The unique identifier of the cluster.
	ClusterIdentifier *string `type:"string"`

	// The nodes in a cluster.
	ClusterNodes []*ClusterNode `type:"list"`

	// The list of cluster parameter groups that are associated with this cluster.
	ClusterParameterGroups []*ClusterParameterGroupStatus `locationNameList:"ClusterParameterGroup" type:"list"`

	// The public key for the cluster.
	ClusterPublicKey *string `type:"string"`

	// The specific revision number of the database in the cluster.
	ClusterRevisionNumber *string `type:"string"`

	// A list of cluster security group that are associated with the cluster. Each
	// security group is represented by an element that contains ClusterSecurityGroup.Name
	// and ClusterSecurityGroup.Status subelements.
	//
	// Cluster security groups are used when the cluster is not created in a VPC.
	// Clusters that are created in a VPC use VPC security groups, which are listed
	// by the VpcSecurityGroups parameter.
	ClusterSecurityGroups []*ClusterSecurityGroupMembership `locationNameList:"ClusterSecurityGroup" type:"list"`

	// Returns the destination region and retention period that are configured for
	// cross-region snapshot copy.
	ClusterSnapshotCopyStatus *ClusterSnapshotCopyStatus `type:"structure"`

	// The current state of this cluster. Possible values include available, creating,
	// deleting, rebooting, renaming, and resizing.
	ClusterStatus *string `type:"string"`

	// The name of the subnet group that is associated with the cluster. This parameter
	// is valid only when the cluster is in a VPC.
	ClusterSubnetGroupName *string `type:"string"`

	// The version ID of the Amazon Redshift engine that is running on the cluster.
	ClusterVersion *string `type:"string"`

	// The name of the initial database that was created when the cluster was created.
	// This same name is returned for the life of the cluster. If an initial database
	// was not specified, a database named "dev" was created by default.
	DBName *string `type:"string"`

	// Describes the status of the elastic IP (EIP) address.
	ElasticIPStatus *ElasticIPStatus `locationName:"ElasticIpStatus" type:"structure"`

	// If true, data in the cluster is encrypted at rest.
	Encrypted *bool `type:"boolean"`

	// The connection endpoint.
	Endpoint *Endpoint `type:"structure"`

	// Reports whether the Amazon Redshift cluster has finished applying any HSM
	// settings changes specified in a modify cluster command.
	//
	// Values: active, applying
	HSMStatus *HSMStatus `locationName:"HsmStatus" type:"structure"`

	// The AWS Key Management Service (KMS) key ID of the encryption key used to
	// encrypt data in the cluster.
	KMSKeyID *string `locationName:"KmsKeyId" type:"string"`

	// The master user name for the cluster. This name is used to connect to the
	// database that is specified in DBName.
	MasterUsername *string `type:"string"`

	// The status of a modify operation, if any, initiated for the cluster.
	ModifyStatus *string `type:"string"`

	// The node type for the nodes in the cluster.
	NodeType *string `type:"string"`

	// The number of compute nodes in the cluster.
	NumberOfNodes *int64 `type:"integer"`

	// If present, changes to the cluster are pending. Specific pending changes
	// are identified by subelements.
	PendingModifiedValues *PendingModifiedValues `type:"structure"`

	// The weekly time range (in UTC) during which system maintenance can occur.
	PreferredMaintenanceWindow *string `type:"string"`

	// If true, the cluster can be accessed from a public network.
	PubliclyAccessible *bool `type:"boolean"`

	// Describes the status of a cluster restore action. Returns null if the cluster
	// was not created by restoring a snapshot.
	RestoreStatus *RestoreStatus `type:"structure"`

	// The list of tags for the cluster.
	Tags []*Tag `locationNameList:"Tag" type:"list"`

	// The identifier of the VPC the cluster is in, if the cluster is in a VPC.
	VPCID *string `locationName:"VpcId" type:"string"`

	// A list of Virtual Private Cloud (VPC) security groups that are associated
	// with the cluster. This parameter is returned only if the cluster is in a
	// VPC.
	VPCSecurityGroups []*VPCSecurityGroupMembership `locationName:"VpcSecurityGroups" locationNameList:"VpcSecurityGroup" type:"list"`
	// contains filtered or unexported fields
}

Describes a cluster.

type ClusterNode 

type ClusterNode struct {
	// Whether the node is a leader node or a compute node.
	NodeRole *string `type:"string"`

	// The private IP address of a node within a cluster.
	PrivateIPAddress *string `type:"string"`

	// The public IP address of a node within a cluster.
	PublicIPAddress *string `type:"string"`
	// contains filtered or unexported fields
}

The identifier of a node in a cluster.

type ClusterParameterGroup 

type ClusterParameterGroup struct {
	// The description of the parameter group.
	Description *string `type:"string"`

	// The name of the cluster parameter group family that this cluster parameter
	// group is compatible with.
	ParameterGroupFamily *string `type:"string"`

	// The name of the cluster parameter group.
	ParameterGroupName *string `type:"string"`

	// The list of tags for the cluster parameter group.
	Tags []*Tag `locationNameList:"Tag" type:"list"`
	// contains filtered or unexported fields
}

Describes a parameter group.

type ClusterParameterGroupNameMessage 

type ClusterParameterGroupNameMessage struct {
	// The name of the cluster parameter group.
	ParameterGroupName *string `type:"string"`

	// The status of the parameter group. For example, if you made a change to a
	// parameter group name-value pair, then the change could be pending a reboot
	// of an associated cluster.
	ParameterGroupStatus *string `type:"string"`
	// contains filtered or unexported fields
}

Contains the output from the ModifyClusterParameterGroup and ResetClusterParameterGroup actions and indicate the parameter group involved and the status of the operation on the parameter group.

type ClusterParameterGroupStatus 

type ClusterParameterGroupStatus struct {
	// The status of parameter updates.
	ParameterApplyStatus *string `type:"string"`

	// The name of the cluster parameter group.
	ParameterGroupName *string `type:"string"`
	// contains filtered or unexported fields
}

Describes the status of a parameter group.

type ClusterSecurityGroup 

type ClusterSecurityGroup struct {
	// The name of the cluster security group to which the operation was applied.
	ClusterSecurityGroupName *string `type:"string"`

	// A description of the security group.
	Description *string `type:"string"`

	// A list of EC2 security groups that are permitted to access clusters associated
	// with this cluster security group.
	EC2SecurityGroups []*EC2SecurityGroup `locationNameList:"EC2SecurityGroup" type:"list"`

	// A list of IP ranges (CIDR blocks) that are permitted to access clusters associated
	// with this cluster security group.
	IPRanges []*IPRange `locationNameList:"IPRange" type:"list"`

	// The list of tags for the cluster security group.
	Tags []*Tag `locationNameList:"Tag" type:"list"`
	// contains filtered or unexported fields
}

Describes a security group.

type ClusterSecurityGroupMembership 

type ClusterSecurityGroupMembership struct {
	// The name of the cluster security group.
	ClusterSecurityGroupName *string `type:"string"`

	// The status of the cluster security group.
	Status *string `type:"string"`
	// contains filtered or unexported fields
}

Describes a security group.

type ClusterSnapshotCopyStatus 

type ClusterSnapshotCopyStatus struct {
	// The destination region that snapshots are automatically copied to when cross-region
	// snapshot copy is enabled.
	DestinationRegion *string `type:"string"`

	// The number of days that automated snapshots are retained in the destination
	// region after they are copied from a source region.
	RetentionPeriod *int64 `type:"long"`
	// contains filtered or unexported fields
}

Returns the destination region and retention period that are configured for cross-region snapshot copy.

type ClusterSubnetGroup 

type ClusterSubnetGroup struct {
	// The name of the cluster subnet group.
	ClusterSubnetGroupName *string `type:"string"`

	// The description of the cluster subnet group.
	Description *string `type:"string"`

	// The status of the cluster subnet group. Possible values are Complete, Incomplete
	// and Invalid.
	SubnetGroupStatus *string `type:"string"`

	// A list of the VPC Subnet elements.
	Subnets []*Subnet `locationNameList:"Subnet" type:"list"`

	// The list of tags for the cluster subnet group.
	Tags []*Tag `locationNameList:"Tag" type:"list"`

	// The VPC ID of the cluster subnet group.
	VPCID *string `locationName:"VpcId" type:"string"`
	// contains filtered or unexported fields
}

Describes a subnet group.

type ClusterVersion 

type ClusterVersion struct {
	// The name of the cluster parameter group family for the cluster.
	ClusterParameterGroupFamily *string `type:"string"`

	// The version number used by the cluster.
	ClusterVersion *string `type:"string"`

	// The description of the cluster version.
	Description *string `type:"string"`
	// contains filtered or unexported fields
}

Describes a cluster version, including the parameter group family and description of the version.

type CopyClusterSnapshotInput 

type CopyClusterSnapshotInput struct {
	// The identifier of the cluster the source snapshot was created from. This
	// parameter is required if your IAM user has a policy containing a snapshot
	// resource element that specifies anything other than * for the cluster name.
	//
	// Constraints:
	//
	//  Must be the identifier for a valid cluster.
	SourceSnapshotClusterIdentifier *string `type:"string"`

	// The identifier for the source snapshot.
	//
	// Constraints:
	//
	//  Must be the identifier for a valid automated snapshot whose state is available.
	SourceSnapshotIdentifier *string `type:"string" required:"true"`

	// The identifier given to the new manual snapshot.
	//
	// Constraints:
	//
	//  Cannot be null, empty, or blank. Must contain from 1 to 255 alphanumeric
	// characters or hyphens. First character must be a letter. Cannot end with
	// a hyphen or contain two consecutive hyphens. Must be unique for the AWS account
	// that is making the request.
	TargetSnapshotIdentifier *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

type CopyClusterSnapshotOutput 

type CopyClusterSnapshotOutput struct {
	// Describes a snapshot.
	Snapshot *Snapshot `type:"structure"`
	// contains filtered or unexported fields
}

type CreateClusterInput 

type CreateClusterInput struct {
	// If true, major version upgrades can be applied during the maintenance window
	// to the Amazon Redshift engine that is running on the cluster.
	//
	//  When a new major version of the Amazon Redshift engine is released, you
	// can request that the service automatically apply upgrades during the maintenance
	// window to the Amazon Redshift engine that is running on your cluster.
	//
	// Default: true
	AllowVersionUpgrade *bool `type:"boolean"`

	// The number of days that automated snapshots are retained. If the value is
	// 0, automated snapshots are disabled. Even if automated snapshots are disabled,
	// you can still create manual snapshots when you want with CreateClusterSnapshot.
	//
	//  Default: 1
	//
	// Constraints: Must be a value from 0 to 35.
	AutomatedSnapshotRetentionPeriod *int64 `type:"integer"`

	// The EC2 Availability Zone (AZ) in which you want Amazon Redshift to provision
	// the cluster. For example, if you have several EC2 instances running in a
	// specific Availability Zone, then you might want the cluster to be provisioned
	// in the same zone in order to decrease network latency.
	//
	//  Default: A random, system-chosen Availability Zone in the region that is
	// specified by the endpoint.
	//
	//  Example: us-east-1d
	//
	//  Constraint: The specified Availability Zone must be in the same region
	// as the current endpoint.
	AvailabilityZone *string `type:"string"`

	// A unique identifier for the cluster. You use this identifier to refer to
	// the cluster for any subsequent cluster operations such as deleting or modifying.
	// The identifier also appears in the Amazon Redshift console.
	//
	// Constraints:
	//
	//  Must contain from 1 to 63 alphanumeric characters or hyphens. Alphabetic
	// characters must be lowercase. First character must be a letter. Cannot end
	// with a hyphen or contain two consecutive hyphens. Must be unique for all
	// clusters within an AWS account.  Example: myexamplecluster
	ClusterIdentifier *string `type:"string" required:"true"`

	// The name of the parameter group to be associated with this cluster.
	//
	// Default: The default Amazon Redshift cluster parameter group. For information
	// about the default parameter group, go to Working with Amazon Redshift Parameter
	// Groups (http://docs.aws.amazon.com/redshift/latest/mgmt/working-with-parameter-groups.html)
	//
	//  Constraints:
	//
	//  Must be 1 to 255 alphanumeric characters or hyphens. First character must
	// be a letter. Cannot end with a hyphen or contain two consecutive hyphens.
	ClusterParameterGroupName *string `type:"string"`

	// A list of security groups to be associated with this cluster.
	//
	//  Default: The default cluster security group for Amazon Redshift.
	ClusterSecurityGroups []*string `locationNameList:"ClusterSecurityGroupName" type:"list"`

	// The name of a cluster subnet group to be associated with this cluster.
	//
	//  If this parameter is not provided the resulting cluster will be deployed
	// outside virtual private cloud (VPC).
	ClusterSubnetGroupName *string `type:"string"`

	// The type of the cluster. When cluster type is specified as   single-node,
	// the NumberOfNodes parameter is not required.  multi-node, the NumberOfNodes
	// parameter is required.
	//
	//  Valid Values: multi-node | single-node
	//
	// Default: multi-node
	ClusterType *string `type:"string"`

	// The version of the Amazon Redshift engine software that you want to deploy
	// on the cluster.
	//
	//  The version selected runs on all the nodes in the cluster.
	//
	// Constraints: Only version 1.0 is currently available.
	//
	// Example: 1.0
	ClusterVersion *string `type:"string"`

	// The name of the first database to be created when the cluster is created.
	//
	// To create additional databases after the cluster is created, connect to
	// the cluster with a SQL client and use SQL commands to create a database.
	// For more information, go to Create a Database (http://docs.aws.amazon.com/redshift/latest/dg/t_creating_database.html)
	// in the Amazon Redshift Database Developer Guide.
	//
	// Default: dev
	//
	// Constraints:
	//
	//  Must contain 1 to 64 alphanumeric characters. Must contain only lowercase
	// letters. Cannot be a word that is reserved by the service. A list of reserved
	// words can be found in Reserved Words (http://docs.aws.amazon.com/redshift/latest/dg/r_pg_keywords.html)
	// in the Amazon Redshift Database Developer Guide.
	DBName *string `type:"string"`

	// The Elastic IP (EIP) address for the cluster.
	//
	// Constraints: The cluster must be provisioned in EC2-VPC and publicly-accessible
	// through an Internet gateway. For more information about provisioning clusters
	// in EC2-VPC, go to Supported Platforms to Launch Your Cluster (http://docs.aws.amazon.com/redshift/latest/mgmt/working-with-clusters.html#cluster-platforms)
	// in the Amazon Redshift Cluster Management Guide.
	ElasticIP *string `locationName:"ElasticIp" type:"string"`

	// If true, the data in the cluster is encrypted at rest.
	//
	// Default: false
	Encrypted *bool `type:"boolean"`

	// Specifies the name of the HSM client certificate the Amazon Redshift cluster
	// uses to retrieve the data encryption keys stored in an HSM.
	HSMClientCertificateIdentifier *string `locationName:"HsmClientCertificateIdentifier" type:"string"`

	// Specifies the name of the HSM configuration that contains the information
	// the Amazon Redshift cluster can use to retrieve and store keys in an HSM.
	HSMConfigurationIdentifier *string `locationName:"HsmConfigurationIdentifier" type:"string"`

	// The AWS Key Management Service (KMS) key ID of the encryption key that you
	// want to use to encrypt data in the cluster.
	KMSKeyID *string `locationName:"KmsKeyId" type:"string"`

	// The password associated with the master user account for the cluster that
	// is being created.
	//
	//  Constraints:
	//
	//  Must be between 8 and 64 characters in length. Must contain at least one
	// uppercase letter. Must contain at least one lowercase letter. Must contain
	// one number. Can be any printable ASCII character (ASCII code 33 to 126) except
	// ' (single quote), " (double quote), \, /, @, or space.
	MasterUserPassword *string `type:"string" required:"true"`

	// The user name associated with the master user account for the cluster that
	// is being created.
	//
	// Constraints:
	//
	//  Must be 1 - 128 alphanumeric characters. First character must be a letter.
	// Cannot be a reserved word. A list of reserved words can be found in Reserved
	// Words (http://docs.aws.amazon.com/redshift/latest/dg/r_pg_keywords.html)
	// in the Amazon Redshift Database Developer Guide.
	MasterUsername *string `type:"string" required:"true"`

	// The node type to be provisioned for the cluster. For information about node
	// types, go to  Working with Clusters (http://docs.aws.amazon.com/redshift/latest/mgmt/working-with-clusters.html#how-many-nodes)
	// in the Amazon Redshift Cluster Management Guide.
	//
	//  Valid Values: dw1.xlarge | dw1.8xlarge | dw2.large | dw2.8xlarge.
	NodeType *string `type:"string" required:"true"`

	// The number of compute nodes in the cluster. This parameter is required when
	// the ClusterType parameter is specified as multi-node.
	//
	// For information about determining how many nodes you need, go to  Working
	// with Clusters (http://docs.aws.amazon.com/redshift/latest/mgmt/working-with-clusters.html#how-many-nodes)
	// in the Amazon Redshift Cluster Management Guide.
	//
	// If you don't specify this parameter, you get a single-node cluster. When
	// requesting a multi-node cluster, you must specify the number of nodes that
	// you want in the cluster.
	//
	// Default: 1
	//
	// Constraints: Value must be at least 1 and no more than 100.
	NumberOfNodes *int64 `type:"integer"`

	// The port number on which the cluster accepts incoming connections.
	//
	// The cluster is accessible only via the JDBC and ODBC connection strings.
	// Part of the connection string requires the port on which the cluster will
	// listen for incoming connections.
	//
	//  Default: 5439
	//
	//  Valid Values: 1150-65535
	Port *int64 `type:"integer"`

	// The weekly time range (in UTC) during which automated cluster maintenance
	// can occur.
	//
	//  Format: ddd:hh24:mi-ddd:hh24:mi
	//
	//  Default: A 30-minute window selected at random from an 8-hour block of
	// time per region, occurring on a random day of the week. For more information
	// about the time blocks for each region, see Maintenance Windows (http://docs.aws.amazon.com/redshift/latest/mgmt/working-with-clusters.html#rs-maintenance-windows)
	// in Amazon Redshift Cluster Management Guide.
	//
	// Valid Days: Mon | Tue | Wed | Thu | Fri | Sat | Sun
	//
	// Constraints: Minimum 30-minute window.
	PreferredMaintenanceWindow *string `type:"string"`

	// If true, the cluster can be accessed from a public network.
	PubliclyAccessible *bool `type:"boolean"`

	// A list of tag instances.
	Tags []*Tag `locationNameList:"Tag" type:"list"`

	// A list of Virtual Private Cloud (VPC) security groups to be associated with
	// the cluster.
	//
	// Default: The default VPC security group is associated with the cluster.
	VPCSecurityGroupIDs []*string `locationName:"VpcSecurityGroupIds" locationNameList:"VpcSecurityGroupId" type:"list"`
	// contains filtered or unexported fields
}

type CreateClusterOutput 

type CreateClusterOutput struct {
	// Describes a cluster.
	Cluster *Cluster `type:"structure"`
	// contains filtered or unexported fields
}

type CreateClusterParameterGroupInput 

type CreateClusterParameterGroupInput struct {
	// A description of the parameter group.
	Description *string `type:"string" required:"true"`

	// The Amazon Redshift engine version to which the cluster parameter group applies.
	// The cluster engine version determines the set of parameters.
	//
	// To get a list of valid parameter group family names, you can call DescribeClusterParameterGroups.
	// By default, Amazon Redshift returns a list of all the parameter groups that
	// are owned by your AWS account, including the default parameter groups for
	// each Amazon Redshift engine version. The parameter group family names associated
	// with the default parameter groups provide you the valid values. For example,
	// a valid family name is "redshift-1.0".
	ParameterGroupFamily *string `type:"string" required:"true"`

	// The name of the cluster parameter group.
	//
	//  Constraints:
	//
	//  Must be 1 to 255 alphanumeric characters or hyphens First character must
	// be a letter. Cannot end with a hyphen or contain two consecutive hyphens.
	// Must be unique withing your AWS account.  This value is stored as a lower-case
	// string.
	ParameterGroupName *string `type:"string" required:"true"`

	// A list of tag instances.
	Tags []*Tag `locationNameList:"Tag" type:"list"`
	// contains filtered or unexported fields
}

type CreateClusterParameterGroupOutput 

type CreateClusterParameterGroupOutput struct {
	// Describes a parameter group.
	ClusterParameterGroup *ClusterParameterGroup `type:"structure"`
	// contains filtered or unexported fields
}

type CreateClusterSecurityGroupInput 

type CreateClusterSecurityGroupInput struct {
	// The name for the security group. Amazon Redshift stores the value as a lowercase
	// string.
	//
	// Constraints:
	//
	//  Must contain no more than 255 alphanumeric characters or hyphens. Must
	// not be "Default". Must be unique for all security groups that are created
	// by your AWS account.  Example: examplesecuritygroup
	ClusterSecurityGroupName *string `type:"string" required:"true"`

	// A description for the security group.
	Description *string `type:"string" required:"true"`

	// A list of tag instances.
	Tags []*Tag `locationNameList:"Tag" type:"list"`
	// contains filtered or unexported fields
}

???

type CreateClusterSecurityGroupOutput 

type CreateClusterSecurityGroupOutput struct {
	// Describes a security group.
	ClusterSecurityGroup *ClusterSecurityGroup `type:"structure"`
	// contains filtered or unexported fields
}

type CreateClusterSnapshotInput 

type CreateClusterSnapshotInput struct {
	// The cluster identifier for which you want a snapshot.
	ClusterIdentifier *string `type:"string" required:"true"`

	// A unique identifier for the snapshot that you are requesting. This identifier
	// must be unique for all snapshots within the AWS account.
	//
	// Constraints:
	//
	//  Cannot be null, empty, or blank Must contain from 1 to 255 alphanumeric
	// characters or hyphens First character must be a letter Cannot end with a
	// hyphen or contain two consecutive hyphens  Example: my-snapshot-id
	SnapshotIdentifier *string `type:"string" required:"true"`

	// A list of tag instances.
	Tags []*Tag `locationNameList:"Tag" type:"list"`
	// contains filtered or unexported fields
}

type CreateClusterSnapshotOutput 

type CreateClusterSnapshotOutput struct {
	// Describes a snapshot.
	Snapshot *Snapshot `type:"structure"`
	// contains filtered or unexported fields
}

type CreateClusterSubnetGroupInput 

type CreateClusterSubnetGroupInput struct {
	// The name for the subnet group. Amazon Redshift stores the value as a lowercase
	// string.
	//
	// Constraints:
	//
	//  Must contain no more than 255 alphanumeric characters or hyphens. Must
	// not be "Default". Must be unique for all subnet groups that are created by
	// your AWS account.  Example: examplesubnetgroup
	ClusterSubnetGroupName *string `type:"string" required:"true"`

	// A description for the subnet group.
	Description *string `type:"string" required:"true"`

	// An array of VPC subnet IDs. A maximum of 20 subnets can be modified in a
	// single request.
	SubnetIDs []*string `locationName:"SubnetIds" locationNameList:"SubnetIdentifier" type:"list" required:"true"`

	// A list of tag instances.
	Tags []*Tag `locationNameList:"Tag" type:"list"`
	// contains filtered or unexported fields
}

type CreateClusterSubnetGroupOutput 

type CreateClusterSubnetGroupOutput struct {
	// Describes a subnet group.
	ClusterSubnetGroup *ClusterSubnetGroup `type:"structure"`
	// contains filtered or unexported fields
}

type CreateEventSubscriptionInput 

type CreateEventSubscriptionInput struct {
	// A Boolean value; set to true to activate the subscription, set to false to
	// create the subscription but not active it.
	Enabled *bool `type:"boolean"`

	// Specifies the Amazon Redshift event categories to be published by the event
	// notification subscription.
	//
	// Values: Configuration, Management, Monitoring, Security
	EventCategories []*string `locationNameList:"EventCategory" type:"list"`

	// The Amazon Resource Name (ARN) of the Amazon SNS topic used to transmit the
	// event notifications. The ARN is created by Amazon SNS when you create a topic
	// and subscribe to it.
	SNSTopicARN *string `locationName:"SnsTopicArn" type:"string" required:"true"`

	// Specifies the Amazon Redshift event severity to be published by the event
	// notification subscription.
	//
	// Values: ERROR, INFO
	Severity *string `type:"string"`

	// A list of one or more identifiers of Amazon Redshift source objects. All
	// of the objects must be of the same type as was specified in the source type
	// parameter. The event subscription will return only events generated by the
	// specified objects. If not specified, then events are returned for all objects
	// within the source type specified.
	//
	// Example: my-cluster-1, my-cluster-2
	//
	// Example: my-snapshot-20131010
	SourceIDs []*string `locationName:"SourceIds" locationNameList:"SourceId" type:"list"`

	// The type of source that will be generating the events. For example, if you
	// want to be notified of events generated by a cluster, you would set this
	// parameter to cluster. If this value is not specified, events are returned
	// for all Amazon Redshift objects in your AWS account. You must specify a source
	// type in order to specify source IDs.
	//
	// Valid values: cluster, cluster-parameter-group, cluster-security-group,
	// and cluster-snapshot.
	SourceType *string `type:"string"`

	// The name of the event subscription to be created.
	//
	// Constraints:
	//
	//  Cannot be null, empty, or blank. Must contain from 1 to 255 alphanumeric
	// characters or hyphens. First character must be a letter. Cannot end with
	// a hyphen or contain two consecutive hyphens.
	SubscriptionName *string `type:"string" required:"true"`

	// A list of tag instances.
	Tags []*Tag `locationNameList:"Tag" type:"list"`
	// contains filtered or unexported fields
}

type CreateEventSubscriptionOutput 

type CreateEventSubscriptionOutput struct {
	EventSubscription *EventSubscription `type:"structure"`
	// contains filtered or unexported fields
}

type CreateHSMClientCertificateInput 

type CreateHSMClientCertificateInput struct {
	// The identifier to be assigned to the new HSM client certificate that the
	// cluster will use to connect to the HSM to use the database encryption keys.
	HSMClientCertificateIdentifier *string `locationName:"HsmClientCertificateIdentifier" type:"string" required:"true"`

	// A list of tag instances.
	Tags []*Tag `locationNameList:"Tag" type:"list"`
	// contains filtered or unexported fields
}

type CreateHSMClientCertificateOutput 

type CreateHSMClientCertificateOutput struct {
	// Returns information about an HSM client certificate. The certificate is stored
	// in a secure Hardware Storage Module (HSM), and used by the Amazon Redshift
	// cluster to encrypt data files.
	HSMClientCertificate *HSMClientCertificate `locationName:"HsmClientCertificate" type:"structure"`
	// contains filtered or unexported fields
}

type CreateHSMConfigurationInput 

type CreateHSMConfigurationInput struct {
	// A text description of the HSM configuration to be created.
	Description *string `type:"string" required:"true"`

	// The identifier to be assigned to the new Amazon Redshift HSM configuration.
	HSMConfigurationIdentifier *string `locationName:"HsmConfigurationIdentifier" type:"string" required:"true"`

	// The IP address that the Amazon Redshift cluster must use to access the HSM.
	HSMIPAddress *string `locationName:"HsmIpAddress" type:"string" required:"true"`

	// The name of the partition in the HSM where the Amazon Redshift clusters will
	// store their database encryption keys.
	HSMPartitionName *string `locationName:"HsmPartitionName" type:"string" required:"true"`

	// The password required to access the HSM partition.
	HSMPartitionPassword *string `locationName:"HsmPartitionPassword" type:"string" required:"true"`

	// The HSMs public certificate file. When using Cloud HSM, the file name is
	// server.pem.
	HSMServerPublicCertificate *string `locationName:"HsmServerPublicCertificate" type:"string" required:"true"`

	// A list of tag instances.
	Tags []*Tag `locationNameList:"Tag" type:"list"`
	// contains filtered or unexported fields
}

type CreateHSMConfigurationOutput 

type CreateHSMConfigurationOutput struct {
	// Returns information about an HSM configuration, which is an object that describes
	// to Amazon Redshift clusters the information they require to connect to an
	// HSM where they can store database encryption keys.
	HSMConfiguration *HSMConfiguration `locationName:"HsmConfiguration" type:"structure"`
	// contains filtered or unexported fields
}

type CreateTagsInput 

type CreateTagsInput struct {
	// The Amazon Resource Name (ARN) to which you want to add the tag or tags.
	// For example, arn:aws:redshift:us-east-1:123456789:cluster:t1.
	ResourceName *string `type:"string" required:"true"`

	// One or more name/value pairs to add as tags to the specified resource. Each
	// tag name is passed in with the parameter tag-key and the corresponding value
	// is passed in with the parameter tag-value. The tag-key and tag-value parameters
	// are separated by a colon (:). Separate multiple tags with a space. For example,
	// --tags "tag-key"="owner":"tag-value"="admin" "tag-key"="environment":"tag-value"="test"
	// "tag-key"="version":"tag-value"="1.0".
	Tags []*Tag `locationNameList:"Tag" type:"list" required:"true"`
	// contains filtered or unexported fields
}

Contains the output from the CreateTags action.

type CreateTagsOutput 

type CreateTagsOutput struct {
	// contains filtered or unexported fields
}

type DefaultClusterParameters 

type DefaultClusterParameters struct {
	// A value that indicates the starting point for the next set of response records
	// in a subsequent request. If a value is returned in a response, you can retrieve
	// the next set of records by providing this returned marker value in the Marker
	// parameter and retrying the command. If the Marker field is empty, all response
	// records have been retrieved for the request.
	Marker *string `type:"string"`

	// The name of the cluster parameter group family to which the engine default
	// parameters apply.
	ParameterGroupFamily *string `type:"string"`

	// The list of cluster default parameters.
	Parameters []*Parameter `locationNameList:"Parameter" type:"list"`
	// contains filtered or unexported fields
}

Describes the default cluster parameters for a parameter group family.

type DeleteClusterInput 

type DeleteClusterInput struct {
	// The identifier of the cluster to be deleted.
	//
	// Constraints:
	//
	//  Must contain lowercase characters. Must contain from 1 to 63 alphanumeric
	// characters or hyphens. First character must be a letter. Cannot end with
	// a hyphen or contain two consecutive hyphens.
	ClusterIdentifier *string `type:"string" required:"true"`

	// The identifier of the final snapshot that is to be created immediately before
	// deleting the cluster. If this parameter is provided, SkipFinalClusterSnapshot
	// must be false.
	//
	// Constraints:
	//
	//  Must be 1 to 255 alphanumeric characters. First character must be a letter.
	// Cannot end with a hyphen or contain two consecutive hyphens.
	FinalClusterSnapshotIdentifier *string `type:"string"`

	// Determines whether a final snapshot of the cluster is created before Amazon
	// Redshift deletes the cluster. If true, a final cluster snapshot is not created.
	// If false, a final cluster snapshot is created before the cluster is deleted.
	//
	// The FinalClusterSnapshotIdentifier parameter must be specified if SkipFinalClusterSnapshot
	// is false. Default: false
	SkipFinalClusterSnapshot *bool `type:"boolean"`
	// contains filtered or unexported fields
}

type DeleteClusterOutput 

type DeleteClusterOutput struct {
	// Describes a cluster.
	Cluster *Cluster `type:"structure"`
	// contains filtered or unexported fields
}

type DeleteClusterParameterGroupInput 

type DeleteClusterParameterGroupInput struct {
	// The name of the parameter group to be deleted.
	//
	// Constraints:
	//
	//  Must be the name of an existing cluster parameter group. Cannot delete
	// a default cluster parameter group.
	ParameterGroupName *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

type DeleteClusterParameterGroupOutput 

type DeleteClusterParameterGroupOutput struct {
	// contains filtered or unexported fields
}

type DeleteClusterSecurityGroupInput 

type DeleteClusterSecurityGroupInput struct {
	// The name of the cluster security group to be deleted.
	ClusterSecurityGroupName *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

type DeleteClusterSecurityGroupOutput 

type DeleteClusterSecurityGroupOutput struct {
	// contains filtered or unexported fields
}

type DeleteClusterSnapshotInput 

type DeleteClusterSnapshotInput struct {
	// The unique identifier of the cluster the snapshot was created from. This
	// parameter is required if your IAM user has a policy containing a snapshot
	// resource element that specifies anything other than * for the cluster name.
	//
	// Constraints: Must be the name of valid cluster.
	SnapshotClusterIdentifier *string `type:"string"`

	// The unique identifier of the manual snapshot to be deleted.
	//
	// Constraints: Must be the name of an existing snapshot that is in the available
	// state.
	SnapshotIdentifier *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

type DeleteClusterSnapshotOutput 

type DeleteClusterSnapshotOutput struct {
	// Describes a snapshot.
	Snapshot *Snapshot `type:"structure"`
	// contains filtered or unexported fields
}

type DeleteClusterSubnetGroupInput 

type DeleteClusterSubnetGroupInput struct {
	// The name of the cluster subnet group name to be deleted.
	ClusterSubnetGroupName *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

type DeleteClusterSubnetGroupOutput 

type DeleteClusterSubnetGroupOutput struct {
	// contains filtered or unexported fields
}

type DeleteEventSubscriptionInput 

type DeleteEventSubscriptionInput struct {
	// The name of the Amazon Redshift event notification subscription to be deleted.
	SubscriptionName *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

type DeleteEventSubscriptionOutput 

type DeleteEventSubscriptionOutput struct {
	// contains filtered or unexported fields
}

type DeleteHSMClientCertificateInput 

type DeleteHSMClientCertificateInput struct {
	// The identifier of the HSM client certificate to be deleted.
	HSMClientCertificateIdentifier *string `locationName:"HsmClientCertificateIdentifier" type:"string" required:"true"`
	// contains filtered or unexported fields
}

type DeleteHSMClientCertificateOutput 

type DeleteHSMClientCertificateOutput struct {
	// contains filtered or unexported fields
}

type DeleteHSMConfigurationInput 

type DeleteHSMConfigurationInput struct {
	// The identifier of the Amazon Redshift HSM configuration to be deleted.
	HSMConfigurationIdentifier *string `locationName:"HsmConfigurationIdentifier" type:"string" required:"true"`
	// contains filtered or unexported fields
}

type DeleteHSMConfigurationOutput 

type DeleteHSMConfigurationOutput struct {
	// contains filtered or unexported fields
}

type DeleteTagsInput 

type DeleteTagsInput struct {
	// The Amazon Resource Name (ARN) from which you want to remove the tag or tags.
	// For example, arn:aws:redshift:us-east-1:123456789:cluster:t1.
	ResourceName *string `type:"string" required:"true"`

	// The tag key that you want to delete.
	TagKeys []*string `locationNameList:"TagKey" type:"list" required:"true"`
	// contains filtered or unexported fields
}

Contains the output from the DeleteTags action.

type DeleteTagsOutput 

type DeleteTagsOutput struct {
	// contains filtered or unexported fields
}

type DescribeClusterParameterGroupsInput 

type DescribeClusterParameterGroupsInput struct {
	// An optional parameter that specifies the starting point to return a set of
	// response records. When the results of a DescribeClusterParameterGroups request
	// exceed the value specified in MaxRecords, AWS returns a value in the Marker
	// field of the response. You can retrieve the next set of response records
	// by providing the returned marker value in the Marker parameter and retrying
	// the request.
	Marker *string `type:"string"`

	// The maximum number of response records to return in each call. If the number
	// of remaining response records exceeds the specified MaxRecords value, a value
	// is returned in a marker field of the response. You can retrieve the next
	// set of records by retrying the command with the returned marker value.
	//
	// Default: 100
	//
	// Constraints: minimum 20, maximum 100.
	MaxRecords *int64 `type:"integer"`

	// The name of a specific parameter group for which to return details. By default,
	// details about all parameter groups and the default parameter group are returned.
	ParameterGroupName *string `type:"string"`

	// A tag key or keys for which you want to return all matching cluster parameter
	// groups that are associated with the specified key or keys. For example, suppose
	// that you have parameter groups that are tagged with keys called owner and
	// environment. If you specify both of these tag keys in the request, Amazon
	// Redshift returns a response with the parameter groups that have either or
	// both of these tag keys associated with them.
	TagKeys []*string `locationNameList:"TagKey" type:"list"`

	// A tag value or values for which you want to return all matching cluster parameter
	// groups that are associated with the specified tag value or values. For example,
	// suppose that you have parameter groups that are tagged with values called
	// admin and test. If you specify both of these tag values in the request, Amazon
	// Redshift returns a response with the parameter groups that have either or
	// both of these tag values associated with them.
	TagValues []*string `locationNameList:"TagValue" type:"list"`
	// contains filtered or unexported fields
}

type DescribeClusterParameterGroupsOutput 

type DescribeClusterParameterGroupsOutput struct {
	// A value that indicates the starting point for the next set of response records
	// in a subsequent request. If a value is returned in a response, you can retrieve
	// the next set of records by providing this returned marker value in the Marker
	// parameter and retrying the command. If the Marker field is empty, all response
	// records have been retrieved for the request.
	Marker *string `type:"string"`

	// A list of ClusterParameterGroup instances. Each instance describes one cluster
	// parameter group.
	ParameterGroups []*ClusterParameterGroup `locationNameList:"ClusterParameterGroup" type:"list"`
	// contains filtered or unexported fields
}

Contains the output from the DescribeClusterParameterGroups action.

type DescribeClusterParametersInput 

type DescribeClusterParametersInput struct {
	// An optional parameter that specifies the starting point to return a set of
	// response records. When the results of a DescribeClusterParameters request
	// exceed the value specified in MaxRecords, AWS returns a value in the Marker
	// field of the response. You can retrieve the next set of response records
	// by providing the returned marker value in the Marker parameter and retrying
	// the request.
	Marker *string `type:"string"`

	// The maximum number of response records to return in each call. If the number
	// of remaining response records exceeds the specified MaxRecords value, a value
	// is returned in a marker field of the response. You can retrieve the next
	// set of records by retrying the command with the returned marker value.
	//
	// Default: 100
	//
	// Constraints: minimum 20, maximum 100.
	MaxRecords *int64 `type:"integer"`

	// The name of a cluster parameter group for which to return details.
	ParameterGroupName *string `type:"string" required:"true"`

	// The parameter types to return. Specify user to show parameters that are different
	// form the default. Similarly, specify engine-default to show parameters that
	// are the same as the default parameter group.
	//
	// Default: All parameter types returned.
	//
	// Valid Values: user | engine-default
	Source *string `type:"string"`
	// contains filtered or unexported fields
}

type DescribeClusterParametersOutput 

type DescribeClusterParametersOutput struct {
	// A value that indicates the starting point for the next set of response records
	// in a subsequent request. If a value is returned in a response, you can retrieve
	// the next set of records by providing this returned marker value in the Marker
	// parameter and retrying the command. If the Marker field is empty, all response
	// records have been retrieved for the request.
	Marker *string `type:"string"`

	// A list of Parameter instances. Each instance lists the parameters of one
	// cluster parameter group.
	Parameters []*Parameter `locationNameList:"Parameter" type:"list"`
	// contains filtered or unexported fields
}

Contains the output from the DescribeClusterParameters action.

type DescribeClusterSecurityGroupsInput 

type DescribeClusterSecurityGroupsInput struct {
	// The name of a cluster security group for which you are requesting details.
	// You can specify either the Marker parameter or a ClusterSecurityGroupName
	// parameter, but not both.
	//
	//  Example: securitygroup1
	ClusterSecurityGroupName *string `type:"string"`

	// An optional parameter that specifies the starting point to return a set of
	// response records. When the results of a DescribeClusterSecurityGroups request
	// exceed the value specified in MaxRecords, AWS returns a value in the Marker
	// field of the response. You can retrieve the next set of response records
	// by providing the returned marker value in the Marker parameter and retrying
	// the request.
	//
	//  Constraints: You can specify either the ClusterSecurityGroupName parameter
	// or the Marker parameter, but not both.
	Marker *string `type:"string"`

	// The maximum number of response records to return in each call. If the number
	// of remaining response records exceeds the specified MaxRecords value, a value
	// is returned in a marker field of the response. You can retrieve the next
	// set of records by retrying the command with the returned marker value.
	//
	// Default: 100
	//
	// Constraints: minimum 20, maximum 100.
	MaxRecords *int64 `type:"integer"`

	// A tag key or keys for which you want to return all matching cluster security
	// groups that are associated with the specified key or keys. For example, suppose
	// that you have security groups that are tagged with keys called owner and
	// environment. If you specify both of these tag keys in the request, Amazon
	// Redshift returns a response with the security groups that have either or
	// both of these tag keys associated with them.
	TagKeys []*string `locationNameList:"TagKey" type:"list"`

	// A tag value or values for which you want to return all matching cluster security
	// groups that are associated with the specified tag value or values. For example,
	// suppose that you have security groups that are tagged with values called
	// admin and test. If you specify both of these tag values in the request, Amazon
	// Redshift returns a response with the security groups that have either or
	// both of these tag values associated with them.
	TagValues []*string `locationNameList:"TagValue" type:"list"`
	// contains filtered or unexported fields
}

???

type DescribeClusterSecurityGroupsOutput 

type DescribeClusterSecurityGroupsOutput struct {
	// A list of ClusterSecurityGroup instances.
	ClusterSecurityGroups []*ClusterSecurityGroup `locationNameList:"ClusterSecurityGroup" type:"list"`

	// A value that indicates the starting point for the next set of response records
	// in a subsequent request. If a value is returned in a response, you can retrieve
	// the next set of records by providing this returned marker value in the Marker
	// parameter and retrying the command. If the Marker field is empty, all response
	// records have been retrieved for the request.
	Marker *string `type:"string"`
	// contains filtered or unexported fields
}

Contains the output from the DescribeClusterSecurityGroups action.

type DescribeClusterSnapshotsInput 

type DescribeClusterSnapshotsInput struct {
	// The identifier of the cluster for which information about snapshots is requested.
	ClusterIdentifier *string `type:"string"`

	// A time value that requests only snapshots created at or before the specified
	// time. The time value is specified in ISO 8601 format. For more information
	// about ISO 8601, go to the ISO8601 Wikipedia page. (http://en.wikipedia.org/wiki/ISO_8601)
	//
	// Example: 2012-07-16T18:00:00Z
	EndTime *time.Time `type:"timestamp" timestampFormat:"iso8601"`

	// An optional parameter that specifies the starting point to return a set of
	// response records. When the results of a DescribeClusterSnapshots request
	// exceed the value specified in MaxRecords, AWS returns a value in the Marker
	// field of the response. You can retrieve the next set of response records
	// by providing the returned marker value in the Marker parameter and retrying
	// the request.
	Marker *string `type:"string"`

	// The maximum number of response records to return in each call. If the number
	// of remaining response records exceeds the specified MaxRecords value, a value
	// is returned in a marker field of the response. You can retrieve the next
	// set of records by retrying the command with the returned marker value.
	//
	// Default: 100
	//
	// Constraints: minimum 20, maximum 100.
	MaxRecords *int64 `type:"integer"`

	// The AWS customer account used to create or copy the snapshot. Use this field
	// to filter the results to snapshots owned by a particular account. To describe
	// snapshots you own, either specify your AWS customer account, or do not specify
	// the parameter.
	OwnerAccount *string `type:"string"`

	// The snapshot identifier of the snapshot about which to return information.
	SnapshotIdentifier *string `type:"string"`

	// The type of snapshots for which you are requesting information. By default,
	// snapshots of all types are returned.
	//
	//  Valid Values: automated | manual
	SnapshotType *string `type:"string"`

	// A value that requests only snapshots created at or after the specified time.
	// The time value is specified in ISO 8601 format. For more information about
	// ISO 8601, go to the ISO8601 Wikipedia page. (http://en.wikipedia.org/wiki/ISO_8601)
	//
	// Example: 2012-07-16T18:00:00Z
	StartTime *time.Time `type:"timestamp" timestampFormat:"iso8601"`

	// A tag key or keys for which you want to return all matching cluster snapshots
	// that are associated with the specified key or keys. For example, suppose
	// that you have snapshots that are tagged with keys called owner and environment.
	// If you specify both of these tag keys in the request, Amazon Redshift returns
	// a response with the snapshots that have either or both of these tag keys
	// associated with them.
	TagKeys []*string `locationNameList:"TagKey" type:"list"`

	// A tag value or values for which you want to return all matching cluster snapshots
	// that are associated with the specified tag value or values. For example,
	// suppose that you have snapshots that are tagged with values called admin
	// and test. If you specify both of these tag values in the request, Amazon
	// Redshift returns a response with the snapshots that have either or both of
	// these tag values associated with them.
	TagValues []*string `locationNameList:"TagValue" type:"list"`
	// contains filtered or unexported fields
}

type DescribeClusterSnapshotsOutput 

type DescribeClusterSnapshotsOutput struct {
	// A value that indicates the starting point for the next set of response records
	// in a subsequent request. If a value is returned in a response, you can retrieve
	// the next set of records by providing this returned marker value in the Marker
	// parameter and retrying the command. If the Marker field is empty, all response
	// records have been retrieved for the request.
	Marker *string `type:"string"`

	// A list of Snapshot instances.
	Snapshots []*Snapshot `locationNameList:"Snapshot" type:"list"`
	// contains filtered or unexported fields
}

Contains the output from the DescribeClusterSnapshots action.

type DescribeClusterSubnetGroupsInput 

type DescribeClusterSubnetGroupsInput struct {
	// The name of the cluster subnet group for which information is requested.
	ClusterSubnetGroupName *string `type:"string"`

	// An optional parameter that specifies the starting point to return a set of
	// response records. When the results of a DescribeClusterSubnetGroups request
	// exceed the value specified in MaxRecords, AWS returns a value in the Marker
	// field of the response. You can retrieve the next set of response records
	// by providing the returned marker value in the Marker parameter and retrying
	// the request.
	Marker *string `type:"string"`

	// The maximum number of response records to return in each call. If the number
	// of remaining response records exceeds the specified MaxRecords value, a value
	// is returned in a marker field of the response. You can retrieve the next
	// set of records by retrying the command with the returned marker value.
	//
	// Default: 100
	//
	// Constraints: minimum 20, maximum 100.
	MaxRecords *int64 `type:"integer"`

	// A tag key or keys for which you want to return all matching cluster subnet
	// groups that are associated with the specified key or keys. For example, suppose
	// that you have subnet groups that are tagged with keys called owner and environment.
	// If you specify both of these tag keys in the request, Amazon Redshift returns
	// a response with the subnet groups that have either or both of these tag keys
	// associated with them.
	TagKeys []*string `locationNameList:"TagKey" type:"list"`

	// A tag value or values for which you want to return all matching cluster subnet
	// groups that are associated with the specified tag value or values. For example,
	// suppose that you have subnet groups that are tagged with values called admin
	// and test. If you specify both of these tag values in the request, Amazon
	// Redshift returns a response with the subnet groups that have either or both
	// of these tag values associated with them.
	TagValues []*string `locationNameList:"TagValue" type:"list"`
	// contains filtered or unexported fields
}

type DescribeClusterSubnetGroupsOutput 

type DescribeClusterSubnetGroupsOutput struct {
	// A list of ClusterSubnetGroup instances.
	ClusterSubnetGroups []*ClusterSubnetGroup `locationNameList:"ClusterSubnetGroup" type:"list"`

	// A value that indicates the starting point for the next set of response records
	// in a subsequent request. If a value is returned in a response, you can retrieve
	// the next set of records by providing this returned marker value in the Marker
	// parameter and retrying the command. If the Marker field is empty, all response
	// records have been retrieved for the request.
	Marker *string `type:"string"`
	// contains filtered or unexported fields
}

Contains the output from the DescribeClusterSubnetGroups action.

type DescribeClusterVersionsInput 

type DescribeClusterVersionsInput struct {
	// The name of a specific cluster parameter group family to return details for.
	//
	// Constraints:
	//
	//  Must be 1 to 255 alphanumeric characters First character must be a letter
	// Cannot end with a hyphen or contain two consecutive hyphens
	ClusterParameterGroupFamily *string `type:"string"`

	// The specific cluster version to return.
	//
	// Example: 1.0
	ClusterVersion *string `type:"string"`

	// An optional parameter that specifies the starting point to return a set of
	// response records. When the results of a DescribeClusterVersions request exceed
	// the value specified in MaxRecords, AWS returns a value in the Marker field
	// of the response. You can retrieve the next set of response records by providing
	// the returned marker value in the Marker parameter and retrying the request.
	Marker *string `type:"string"`

	// The maximum number of response records to return in each call. If the number
	// of remaining response records exceeds the specified MaxRecords value, a value
	// is returned in a marker field of the response. You can retrieve the next
	// set of records by retrying the command with the returned marker value.
	//
	// Default: 100
	//
	// Constraints: minimum 20, maximum 100.
	MaxRecords *int64 `type:"integer"`
	// contains filtered or unexported fields
}

type DescribeClusterVersionsOutput 

type DescribeClusterVersionsOutput struct {
	// A list of Version elements.
	ClusterVersions []*ClusterVersion `locationNameList:"ClusterVersion" type:"list"`

	// A value that indicates the starting point for the next set of response records
	// in a subsequent request. If a value is returned in a response, you can retrieve
	// the next set of records by providing this returned marker value in the Marker
	// parameter and retrying the command. If the Marker field is empty, all response
	// records have been retrieved for the request.
	Marker *string `type:"string"`
	// contains filtered or unexported fields
}

Contains the output from the DescribeClusterVersions action.

type DescribeClustersInput 

type DescribeClustersInput struct {
	// The unique identifier of a cluster whose properties you are requesting. This
	// parameter is case sensitive.
	//
	// The default is that all clusters defined for an account are returned.
	ClusterIdentifier *string `type:"string"`

	// An optional parameter that specifies the starting point to return a set of
	// response records. When the results of a DescribeClusters request exceed the
	// value specified in MaxRecords, AWS returns a value in the Marker field of
	// the response. You can retrieve the next set of response records by providing
	// the returned marker value in the Marker parameter and retrying the request.
	//
	//  Constraints: You can specify either the ClusterIdentifier parameter or
	// the Marker parameter, but not both.
	Marker *string `type:"string"`

	// The maximum number of response records to return in each call. If the number
	// of remaining response records exceeds the specified MaxRecords value, a value
	// is returned in a marker field of the response. You can retrieve the next
	// set of records by retrying the command with the returned marker value.
	//
	// Default: 100
	//
	// Constraints: minimum 20, maximum 100.
	MaxRecords *int64 `type:"integer"`

	// A tag key or keys for which you want to return all matching clusters that
	// are associated with the specified key or keys. For example, suppose that
	// you have clusters that are tagged with keys called owner and environment.
	// If you specify both of these tag keys in the request, Amazon Redshift returns
	// a response with the clusters that have either or both of these tag keys associated
	// with them.
	TagKeys []*string `locationNameList:"TagKey" type:"list"`

	// A tag value or values for which you want to return all matching clusters
	// that are associated with the specified tag value or values. For example,
	// suppose that you have clusters that are tagged with values called admin and
	// test. If you specify both of these tag values in the request, Amazon Redshift
	// returns a response with the clusters that have either or both of these tag
	// values associated with them.
	TagValues []*string `locationNameList:"TagValue" type:"list"`
	// contains filtered or unexported fields
}

type DescribeClustersOutput 

type DescribeClustersOutput struct {
	// A list of Cluster objects, where each object describes one cluster.
	Clusters []*Cluster `locationNameList:"Cluster" type:"list"`

	// A value that indicates the starting point for the next set of response records
	// in a subsequent request. If a value is returned in a response, you can retrieve
	// the next set of records by providing this returned marker value in the Marker
	// parameter and retrying the command. If the Marker field is empty, all response
	// records have been retrieved for the request.
	Marker *string `type:"string"`
	// contains filtered or unexported fields
}

Contains the output from the DescribeClusters action.

type DescribeDefaultClusterParametersInput 

type DescribeDefaultClusterParametersInput struct {
	// An optional parameter that specifies the starting point to return a set of
	// response records. When the results of a DescribeDefaultClusterParameters
	// request exceed the value specified in MaxRecords, AWS returns a value in
	// the Marker field of the response. You can retrieve the next set of response
	// records by providing the returned marker value in the Marker parameter and
	// retrying the request.
	Marker *string `type:"string"`

	// The maximum number of response records to return in each call. If the number
	// of remaining response records exceeds the specified MaxRecords value, a value
	// is returned in a marker field of the response. You can retrieve the next
	// set of records by retrying the command with the returned marker value.
	//
	// Default: 100
	//
	// Constraints: minimum 20, maximum 100.
	MaxRecords *int64 `type:"integer"`

	// The name of the cluster parameter group family.
	ParameterGroupFamily *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

type DescribeDefaultClusterParametersOutput 

type DescribeDefaultClusterParametersOutput struct {
	// Describes the default cluster parameters for a parameter group family.
	DefaultClusterParameters *DefaultClusterParameters `type:"structure"`
	// contains filtered or unexported fields
}

type DescribeEventCategoriesInput 

type DescribeEventCategoriesInput struct {
	// The source type, such as cluster or parameter group, to which the described
	// event categories apply.
	//
	//  Valid values: cluster, snapshot, parameter group, and security group.
	SourceType *string `type:"string"`
	// contains filtered or unexported fields
}

type DescribeEventCategoriesOutput 

type DescribeEventCategoriesOutput struct {
	// A list of event categories descriptions.
	EventCategoriesMapList []*EventCategoriesMap `locationNameList:"EventCategoriesMap" type:"list"`
	// contains filtered or unexported fields
}

type DescribeEventSubscriptionsInput 

type DescribeEventSubscriptionsInput struct {
	// An optional parameter that specifies the starting point to return a set of
	// response records. When the results of a DescribeEventSubscriptions request
	// exceed the value specified in MaxRecords, AWS returns a value in the Marker
	// field of the response. You can retrieve the next set of response records
	// by providing the returned marker value in the Marker parameter and retrying
	// the request.
	Marker *string `type:"string"`

	// The maximum number of response records to return in each call. If the number
	// of remaining response records exceeds the specified MaxRecords value, a value
	// is returned in a marker field of the response. You can retrieve the next
	// set of records by retrying the command with the returned marker value.
	//
	// Default: 100
	//
	// Constraints: minimum 20, maximum 100.
	MaxRecords *int64 `type:"integer"`

	// The name of the Amazon Redshift event notification subscription to be described.
	SubscriptionName *string `type:"string"`
	// contains filtered or unexported fields
}

type DescribeEventSubscriptionsOutput 

type DescribeEventSubscriptionsOutput struct {
	// A list of event subscriptions.
	EventSubscriptionsList []*EventSubscription `locationNameList:"EventSubscription" type:"list"`

	// A value that indicates the starting point for the next set of response records
	// in a subsequent request. If a value is returned in a response, you can retrieve
	// the next set of records by providing this returned marker value in the Marker
	// parameter and retrying the command. If the Marker field is empty, all response
	// records have been retrieved for the request.
	Marker *string `type:"string"`
	// contains filtered or unexported fields
}

type DescribeEventsInput 

type DescribeEventsInput struct {
	// The number of minutes prior to the time of the request for which to retrieve
	// events. For example, if the request is sent at 18:00 and you specify a duration
	// of 60, then only events which have occurred after 17:00 will be returned.
	//
	// Default: 60
	Duration *int64 `type:"integer"`

	// The end of the time interval for which to retrieve events, specified in ISO
	// 8601 format. For more information about ISO 8601, go to the ISO8601 Wikipedia
	// page. (http://en.wikipedia.org/wiki/ISO_8601)
	//
	// Example: 2009-07-08T18:00Z
	EndTime *time.Time `type:"timestamp" timestampFormat:"iso8601"`

	// An optional parameter that specifies the starting point to return a set of
	// response records. When the results of a DescribeEvents request exceed the
	// value specified in MaxRecords, AWS returns a value in the Marker field of
	// the response. You can retrieve the next set of response records by providing
	// the returned marker value in the Marker parameter and retrying the request.
	Marker *string `type:"string"`

	// The maximum number of response records to return in each call. If the number
	// of remaining response records exceeds the specified MaxRecords value, a value
	// is returned in a marker field of the response. You can retrieve the next
	// set of records by retrying the command with the returned marker value.
	//
	// Default: 100
	//
	// Constraints: minimum 20, maximum 100.
	MaxRecords *int64 `type:"integer"`

	// The identifier of the event source for which events will be returned. If
	// this parameter is not specified, then all sources are included in the response.
	//
	// Constraints:
	//
	// If SourceIdentifier is supplied, SourceType must also be provided.
	//
	//  Specify a cluster identifier when SourceType is cluster. Specify a cluster
	// security group name when SourceType is cluster-security-group. Specify a
	// cluster parameter group name when SourceType is cluster-parameter-group.
	// Specify a cluster snapshot identifier when SourceType is cluster-snapshot.
	SourceIdentifier *string `type:"string"`

	// The event source to retrieve events for. If no value is specified, all events
	// are returned.
	//
	// Constraints:
	//
	// If SourceType is supplied, SourceIdentifier must also be provided.
	//
	//  Specify cluster when SourceIdentifier is a cluster identifier. Specify
	// cluster-security-group when SourceIdentifier is a cluster security group
	// name. Specify cluster-parameter-group when SourceIdentifier is a cluster
	// parameter group name. Specify cluster-snapshot when SourceIdentifier is a
	// cluster snapshot identifier.
	SourceType *string `type:"string"`

	// The beginning of the time interval to retrieve events for, specified in ISO
	// 8601 format. For more information about ISO 8601, go to the ISO8601 Wikipedia
	// page. (http://en.wikipedia.org/wiki/ISO_8601)
	//
	// Example: 2009-07-08T18:00Z
	StartTime *time.Time `type:"timestamp" timestampFormat:"iso8601"`
	// contains filtered or unexported fields
}

type DescribeEventsOutput 

type DescribeEventsOutput struct {
	// A list of Event instances.
	Events []*Event `locationNameList:"Event" type:"list"`

	// A value that indicates the starting point for the next set of response records
	// in a subsequent request. If a value is returned in a response, you can retrieve
	// the next set of records by providing this returned marker value in the Marker
	// parameter and retrying the command. If the Marker field is empty, all response
	// records have been retrieved for the request.
	Marker *string `type:"string"`
	// contains filtered or unexported fields
}

Contains the output from the DescribeEvents action.

type DescribeHSMClientCertificatesInput 

type DescribeHSMClientCertificatesInput struct {
	// The identifier of a specific HSM client certificate for which you want information.
	// If no identifier is specified, information is returned for all HSM client
	// certificates owned by your AWS customer account.
	HSMClientCertificateIdentifier *string `locationName:"HsmClientCertificateIdentifier" type:"string"`

	// An optional parameter that specifies the starting point to return a set of
	// response records. When the results of a DescribeHsmClientCertificates request
	// exceed the value specified in MaxRecords, AWS returns a value in the Marker
	// field of the response. You can retrieve the next set of response records
	// by providing the returned marker value in the Marker parameter and retrying
	// the request.
	Marker *string `type:"string"`

	// The maximum number of response records to return in each call. If the number
	// of remaining response records exceeds the specified MaxRecords value, a value
	// is returned in a marker field of the response. You can retrieve the next
	// set of records by retrying the command with the returned marker value.
	//
	// Default: 100
	//
	// Constraints: minimum 20, maximum 100.
	MaxRecords *int64 `type:"integer"`

	// A tag key or keys for which you want to return all matching HSM client certificates
	// that are associated with the specified key or keys. For example, suppose
	// that you have HSM client certificates that are tagged with keys called owner
	// and environment. If you specify both of these tag keys in the request, Amazon
	// Redshift returns a response with the HSM client certificates that have either
	// or both of these tag keys associated with them.
	TagKeys []*string `locationNameList:"TagKey" type:"list"`

	// A tag value or values for which you want to return all matching HSM client
	// certificates that are associated with the specified tag value or values.
	// For example, suppose that you have HSM client certificates that are tagged
	// with values called admin and test. If you specify both of these tag values
	// in the request, Amazon Redshift returns a response with the HSM client certificates
	// that have either or both of these tag values associated with them.
	TagValues []*string `locationNameList:"TagValue" type:"list"`
	// contains filtered or unexported fields
}

type DescribeHSMClientCertificatesOutput 

type DescribeHSMClientCertificatesOutput struct {
	// A list of the identifiers for one or more HSM client certificates used by
	// Amazon Redshift clusters to store and retrieve database encryption keys in
	// an HSM.
	HSMClientCertificates []*HSMClientCertificate `locationName:"HsmClientCertificates" locationNameList:"HsmClientCertificate" type:"list"`

	// A value that indicates the starting point for the next set of response records
	// in a subsequent request. If a value is returned in a response, you can retrieve
	// the next set of records by providing this returned marker value in the Marker
	// parameter and retrying the command. If the Marker field is empty, all response
	// records have been retrieved for the request.
	Marker *string `type:"string"`
	// contains filtered or unexported fields
}

type DescribeHSMConfigurationsInput 

type DescribeHSMConfigurationsInput struct {
	// The identifier of a specific Amazon Redshift HSM configuration to be described.
	// If no identifier is specified, information is returned for all HSM configurations
	// owned by your AWS customer account.
	HSMConfigurationIdentifier *string `locationName:"HsmConfigurationIdentifier" type:"string"`

	// An optional parameter that specifies the starting point to return a set of
	// response records. When the results of a DescribeHsmConfigurations request
	// exceed the value specified in MaxRecords, AWS returns a value in the Marker
	// field of the response. You can retrieve the next set of response records
	// by providing the returned marker value in the Marker parameter and retrying
	// the request.
	Marker *string `type:"string"`

	// The maximum number of response records to return in each call. If the number
	// of remaining response records exceeds the specified MaxRecords value, a value
	// is returned in a marker field of the response. You can retrieve the next
	// set of records by retrying the command with the returned marker value.
	//
	// Default: 100
	//
	// Constraints: minimum 20, maximum 100.
	MaxRecords *int64 `type:"integer"`

	// A tag key or keys for which you want to return all matching HSM configurations
	// that are associated with the specified key or keys. For example, suppose
	// that you have HSM configurations that are tagged with keys called owner and
	// environment. If you specify both of these tag keys in the request, Amazon
	// Redshift returns a response with the HSM configurations that have either
	// or both of these tag keys associated with them.
	TagKeys []*string `locationNameList:"TagKey" type:"list"`

	// A tag value or values for which you want to return all matching HSM configurations
	// that are associated with the specified tag value or values. For example,
	// suppose that you have HSM configurations that are tagged with values called
	// admin and test. If you specify both of these tag values in the request, Amazon
	// Redshift returns a response with the HSM configurations that have either
	// or both of these tag values associated with them.
	TagValues []*string `locationNameList:"TagValue" type:"list"`
	// contains filtered or unexported fields
}

type DescribeHSMConfigurationsOutput 

type DescribeHSMConfigurationsOutput struct {
	// A list of Amazon Redshift HSM configurations.
	HSMConfigurations []*HSMConfiguration `locationName:"HsmConfigurations" locationNameList:"HsmConfiguration" type:"list"`

	// A value that indicates the starting point for the next set of response records
	// in a subsequent request. If a value is returned in a response, you can retrieve
	// the next set of records by providing this returned marker value in the Marker
	// parameter and retrying the command. If the Marker field is empty, all response
	// records have been retrieved for the request.
	Marker *string `type:"string"`
	// contains filtered or unexported fields
}

type DescribeLoggingStatusInput 

type DescribeLoggingStatusInput struct {
	// The identifier of the cluster to get the logging status from.
	//
	// Example: examplecluster
	ClusterIdentifier *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

type DescribeOrderableClusterOptionsInput 

type DescribeOrderableClusterOptionsInput struct {
	// The version filter value. Specify this parameter to show only the available
	// offerings matching the specified version.
	//
	// Default: All versions.
	//
	// Constraints: Must be one of the version returned from DescribeClusterVersions.
	ClusterVersion *string `type:"string"`

	// An optional parameter that specifies the starting point to return a set of
	// response records. When the results of a DescribeOrderableClusterOptions request
	// exceed the value specified in MaxRecords, AWS returns a value in the Marker
	// field of the response. You can retrieve the next set of response records
	// by providing the returned marker value in the Marker parameter and retrying
	// the request.
	Marker *string `type:"string"`

	// The maximum number of response records to return in each call. If the number
	// of remaining response records exceeds the specified MaxRecords value, a value
	// is returned in a marker field of the response. You can retrieve the next
	// set of records by retrying the command with the returned marker value.
	//
	// Default: 100
	//
	// Constraints: minimum 20, maximum 100.
	MaxRecords *int64 `type:"integer"`

	// The node type filter value. Specify this parameter to show only the available
	// offerings matching the specified node type.
	NodeType *string `type:"string"`
	// contains filtered or unexported fields
}

type DescribeOrderableClusterOptionsOutput 

type DescribeOrderableClusterOptionsOutput struct {
	// A value that indicates the starting point for the next set of response records
	// in a subsequent request. If a value is returned in a response, you can retrieve
	// the next set of records by providing this returned marker value in the Marker
	// parameter and retrying the command. If the Marker field is empty, all response
	// records have been retrieved for the request.
	Marker *string `type:"string"`

	// An OrderableClusterOption structure containing information about orderable
	// options for the Cluster.
	OrderableClusterOptions []*OrderableClusterOption `locationNameList:"OrderableClusterOption" type:"list"`
	// contains filtered or unexported fields
}

Contains the output from the DescribeOrderableClusterOptions action.

type DescribeReservedNodeOfferingsInput 

type DescribeReservedNodeOfferingsInput struct {
	// An optional parameter that specifies the starting point to return a set of
	// response records. When the results of a DescribeReservedNodeOfferings request
	// exceed the value specified in MaxRecords, AWS returns a value in the Marker
	// field of the response. You can retrieve the next set of response records
	// by providing the returned marker value in the Marker parameter and retrying
	// the request.
	Marker *string `type:"string"`

	// The maximum number of response records to return in each call. If the number
	// of remaining response records exceeds the specified MaxRecords value, a value
	// is returned in a marker field of the response. You can retrieve the next
	// set of records by retrying the command with the returned marker value.
	//
	// Default: 100
	//
	// Constraints: minimum 20, maximum 100.
	MaxRecords *int64 `type:"integer"`

	// The unique identifier for the offering.
	ReservedNodeOfferingID *string `locationName:"ReservedNodeOfferingId" type:"string"`
	// contains filtered or unexported fields
}

to be provided.

type DescribeReservedNodeOfferingsOutput 

type DescribeReservedNodeOfferingsOutput struct {
	// A value that indicates the starting point for the next set of response records
	// in a subsequent request. If a value is returned in a response, you can retrieve
	// the next set of records by providing this returned marker value in the Marker
	// parameter and retrying the command. If the Marker field is empty, all response
	// records have been retrieved for the request.
	Marker *string `type:"string"`

	// A list of reserved node offerings.
	ReservedNodeOfferings []*ReservedNodeOffering `locationNameList:"ReservedNodeOffering" type:"list"`
	// contains filtered or unexported fields
}

Contains the output from the DescribeReservedNodeOfferings action.

type DescribeReservedNodesInput 

type DescribeReservedNodesInput struct {
	// An optional parameter that specifies the starting point to return a set of
	// response records. When the results of a DescribeReservedNodes request exceed
	// the value specified in MaxRecords, AWS returns a value in the Marker field
	// of the response. You can retrieve the next set of response records by providing
	// the returned marker value in the Marker parameter and retrying the request.
	Marker *string `type:"string"`

	// The maximum number of response records to return in each call. If the number
	// of remaining response records exceeds the specified MaxRecords value, a value
	// is returned in a marker field of the response. You can retrieve the next
	// set of records by retrying the command with the returned marker value.
	//
	// Default: 100
	//
	// Constraints: minimum 20, maximum 100.
	MaxRecords *int64 `type:"integer"`

	// Identifier for the node reservation.
	ReservedNodeID *string `locationName:"ReservedNodeId" type:"string"`
	// contains filtered or unexported fields
}

type DescribeReservedNodesOutput 

type DescribeReservedNodesOutput struct {
	// A value that indicates the starting point for the next set of response records
	// in a subsequent request. If a value is returned in a response, you can retrieve
	// the next set of records by providing this returned marker value in the Marker
	// parameter and retrying the command. If the Marker field is empty, all response
	// records have been retrieved for the request.
	Marker *string `type:"string"`

	// The list of reserved nodes.
	ReservedNodes []*ReservedNode `locationNameList:"ReservedNode" type:"list"`
	// contains filtered or unexported fields
}

Contains the output from the DescribeReservedNodes action.

type DescribeResizeInput 

type DescribeResizeInput struct {
	// The unique identifier of a cluster whose resize progress you are requesting.
	// This parameter is case-sensitive.
	//
	// By default, resize operations for all clusters defined for an AWS account
	// are returned.
	ClusterIdentifier *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

type DescribeResizeOutput 

type DescribeResizeOutput struct {
	// The average rate of the resize operation over the last few minutes, measured
	// in megabytes per second. After the resize operation completes, this value
	// shows the average rate of the entire resize operation.
	AvgResizeRateInMegaBytesPerSecond *float64 `type:"double"`

	// The amount of seconds that have elapsed since the resize operation began.
	// After the resize operation completes, this value shows the total actual time,
	// in seconds, for the resize operation.
	ElapsedTimeInSeconds *int64 `type:"long"`

	// The estimated time remaining, in seconds, until the resize operation is complete.
	// This value is calculated based on the average resize rate and the estimated
	// amount of data remaining to be processed. Once the resize operation is complete,
	// this value will be 0.
	EstimatedTimeToCompletionInSeconds *int64 `type:"long"`

	// The names of tables that have been completely imported .
	//
	// Valid Values: List of table names.
	ImportTablesCompleted []*string `type:"list"`

	// The names of tables that are being currently imported.
	//
	// Valid Values: List of table names.
	ImportTablesInProgress []*string `type:"list"`

	// The names of tables that have not been yet imported.
	//
	// Valid Values: List of table names
	ImportTablesNotStarted []*string `type:"list"`

	// While the resize operation is in progress, this value shows the current amount
	// of data, in megabytes, that has been processed so far. When the resize operation
	// is complete, this value shows the total amount of data, in megabytes, on
	// the cluster, which may be more or less than TotalResizeDataInMegaBytes (the
	// estimated total amount of data before resize).
	ProgressInMegaBytes *int64 `type:"long"`

	// The status of the resize operation.
	//
	// Valid Values: NONE | IN_PROGRESS | FAILED | SUCCEEDED
	Status *string `type:"string"`

	// The cluster type after the resize operation is complete.
	//
	// Valid Values: multi-node | single-node
	TargetClusterType *string `type:"string"`

	// The node type that the cluster will have after the resize operation is complete.
	TargetNodeType *string `type:"string"`

	// The number of nodes that the cluster will have after the resize operation
	// is complete.
	TargetNumberOfNodes *int64 `type:"integer"`

	// The estimated total amount of data, in megabytes, on the cluster before the
	// resize operation began.
	TotalResizeDataInMegaBytes *int64 `type:"long"`
	// contains filtered or unexported fields
}

Describes the result of a cluster resize operation.

type DescribeTagsInput 

type DescribeTagsInput struct {
	// A value that indicates the starting point for the next set of response records
	// in a subsequent request. If a value is returned in a response, you can retrieve
	// the next set of records by providing this returned marker value in the marker
	// parameter and retrying the command. If the marker field is empty, all response
	// records have been retrieved for the request.
	Marker *string `type:"string"`

	// The maximum number or response records to return in each call. If the number
	// of remaining response records exceeds the specified MaxRecords value, a value
	// is returned in a marker field of the response. You can retrieve the next
	// set of records by retrying the command with the returned marker value.
	MaxRecords *int64 `type:"integer"`

	// The Amazon Resource Name (ARN) for which you want to describe the tag or
	// tags. For example, arn:aws:redshift:us-east-1:123456789:cluster:t1.
	ResourceName *string `type:"string"`

	// The type of resource with which you want to view tags. Valid resource types
	// are:  Cluster CIDR/IP EC2 security group Snapshot Cluster security group
	// Subnet group HSM connection HSM certificate Parameter group
	//
	//  For more information about Amazon Redshift resource types and constructing
	// ARNs, go to Constructing an Amazon Redshift Amazon Resource Name (ARN) (http://docs.aws.amazon.com/redshift/latest/mgmt/constructing-redshift-arn.html)
	// in the Amazon Redshift Cluster Management Guide.
	ResourceType *string `type:"string"`

	// A tag key or keys for which you want to return all matching resources that
	// are associated with the specified key or keys. For example, suppose that
	// you have resources tagged with keys called owner and environment. If you
	// specify both of these tag keys in the request, Amazon Redshift returns a
	// response with all resources that have either or both of these tag keys associated
	// with them.
	TagKeys []*string `locationNameList:"TagKey" type:"list"`

	// A tag value or values for which you want to return all matching resources
	// that are associated with the specified value or values. For example, suppose
	// that you have resources tagged with values called admin and test. If you
	// specify both of these tag values in the request, Amazon Redshift returns
	// a response with all resources that have either or both of these tag values
	// associated with them.
	TagValues []*string `locationNameList:"TagValue" type:"list"`
	// contains filtered or unexported fields
}

Contains the output from the DescribeTags action.

type DescribeTagsOutput 

type DescribeTagsOutput struct {
	// A value that indicates the starting point for the next set of response records
	// in a subsequent request. If a value is returned in a response, you can retrieve
	// the next set of records by providing this returned marker value in the Marker
	// parameter and retrying the command. If the Marker field is empty, all response
	// records have been retrieved for the request.
	Marker *string `type:"string"`

	// A list of tags with their associated resources.
	TaggedResources []*TaggedResource `locationNameList:"TaggedResource" type:"list"`
	// contains filtered or unexported fields
}

Contains the output from the DescribeTags action.

type DisableLoggingInput 

type DisableLoggingInput struct {
	// The identifier of the cluster on which logging is to be stopped.
	//
	// Example: examplecluster
	ClusterIdentifier *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

type DisableSnapshotCopyInput 

type DisableSnapshotCopyInput struct {
	// The unique identifier of the source cluster that you want to disable copying
	// of snapshots to a destination region.
	//
	//  Constraints: Must be the valid name of an existing cluster that has cross-region
	// snapshot copy enabled.
	ClusterIdentifier *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

type DisableSnapshotCopyOutput 

type DisableSnapshotCopyOutput struct {
	// Describes a cluster.
	Cluster *Cluster `type:"structure"`
	// contains filtered or unexported fields
}

type EC2SecurityGroup 

type EC2SecurityGroup struct {
	// The name of the EC2 Security Group.
	EC2SecurityGroupName *string `type:"string"`

	// The AWS ID of the owner of the EC2 security group specified in the EC2SecurityGroupName
	// field.
	EC2SecurityGroupOwnerID *string `locationName:"EC2SecurityGroupOwnerId" type:"string"`

	// The status of the EC2 security group.
	Status *string `type:"string"`

	// The list of tags for the EC2 security group.
	Tags []*Tag `locationNameList:"Tag" type:"list"`
	// contains filtered or unexported fields
}

Describes an Amazon EC2 security group.

type ElasticIPStatus 

type ElasticIPStatus struct {
	// The elastic IP (EIP) address for the cluster.
	ElasticIP *string `locationName:"ElasticIp" type:"string"`

	// Describes the status of the elastic IP (EIP) address.
	Status *string `type:"string"`
	// contains filtered or unexported fields
}

Describes the status of the elastic IP (EIP) address.

type EnableLoggingInput 

type EnableLoggingInput struct {
	// The name of an existing S3 bucket where the log files are to be stored.
	//
	// Constraints:
	//
	//  Must be in the same region as the cluster The cluster must have read bucket
	// and put object permissions
	BucketName *string `type:"string" required:"true"`

	// The identifier of the cluster on which logging is to be started.
	//
	// Example: examplecluster
	ClusterIdentifier *string `type:"string" required:"true"`

	// The prefix applied to the log file names.
	//
	// Constraints:
	//
	//  Cannot exceed 512 characters Cannot contain spaces( ), double quotes ("),
	// single quotes ('), a backslash (\), or control characters. The hexadecimal
	// codes for invalid characters are:  x00 to x20 x22 x27 x5c x7f or larger
	S3KeyPrefix *string `type:"string"`
	// contains filtered or unexported fields
}

type EnableSnapshotCopyInput 

type EnableSnapshotCopyInput struct {
	// The unique identifier of the source cluster to copy snapshots from.
	//
	//  Constraints: Must be the valid name of an existing cluster that does not
	// already have cross-region snapshot copy enabled.
	ClusterIdentifier *string `type:"string" required:"true"`

	// The destination region that you want to copy snapshots to.
	//
	//  Constraints: Must be the name of a valid region. For more information,
	// see Regions and Endpoints (http://docs.aws.amazon.com/general/latest/gr/rande.html#redshift_region)
	// in the Amazon Web Services General Reference.
	DestinationRegion *string `type:"string" required:"true"`

	// The number of days to retain automated snapshots in the destination region
	// after they are copied from the source region.
	//
	//  Default: 7.
	//
	//  Constraints: Must be at least 1 and no more than 35.
	RetentionPeriod *int64 `type:"integer"`
	// contains filtered or unexported fields
}

type EnableSnapshotCopyOutput 

type EnableSnapshotCopyOutput struct {
	// Describes a cluster.
	Cluster *Cluster `type:"structure"`
	// contains filtered or unexported fields
}

type Endpoint 

type Endpoint struct {
	// The DNS address of the Cluster.
	Address *string `type:"string"`

	// The port that the database engine is listening on.
	Port *int64 `type:"integer"`
	// contains filtered or unexported fields
}

Describes a connection endpoint.

type Event 

type Event struct {
	// The date and time of the event.
	Date *time.Time `type:"timestamp" timestampFormat:"iso8601"`

	// A list of the event categories.
	EventCategories []*string `locationNameList:"EventCategory" type:"list"`

	// The identifier of the event.
	EventID *string `locationName:"EventId" type:"string"`

	// The text of this event.
	Message *string `type:"string"`

	// The severity of the event.
	//
	// Values: ERROR, INFO
	Severity *string `type:"string"`

	// The identifier for the source of the event.
	SourceIdentifier *string `type:"string"`

	// The source type for this event.
	SourceType *string `type:"string"`
	// contains filtered or unexported fields
}

Describes an event.

type EventCategoriesMap 

type EventCategoriesMap struct {
	// The events in the event category.
	Events []*EventInfoMap `locationNameList:"EventInfoMap" type:"list"`

	// The Amazon Redshift source type, such as cluster or cluster-snapshot, that
	// the returned categories belong to.
	SourceType *string `type:"string"`
	// contains filtered or unexported fields
}

type EventInfoMap 

type EventInfoMap struct {
	// The category of an Amazon Redshift event.
	EventCategories []*string `locationNameList:"EventCategory" type:"list"`

	// The description of an Amazon Redshift event.
	EventDescription *string `type:"string"`

	// The identifier of an Amazon Redshift event.
	EventID *string `locationName:"EventId" type:"string"`

	// The severity of the event.
	//
	// Values: ERROR, INFO
	Severity *string `type:"string"`
	// contains filtered or unexported fields
}

type EventSubscription 

type EventSubscription struct {
	// The name of the Amazon Redshift event notification subscription.
	CustSubscriptionID *string `locationName:"CustSubscriptionId" type:"string"`

	// The AWS customer account associated with the Amazon Redshift event notification
	// subscription.
	CustomerAWSID *string `locationName:"CustomerAwsId" type:"string"`

	// A Boolean value indicating whether the subscription is enabled. true indicates
	// the subscription is enabled.
	Enabled *bool `type:"boolean"`

	// The list of Amazon Redshift event categories specified in the event notification
	// subscription.
	//
	// Values: Configuration, Management, Monitoring, Security
	EventCategoriesList []*string `locationNameList:"EventCategory" type:"list"`

	// The Amazon Resource Name (ARN) of the Amazon SNS topic used by the event
	// notification subscription.
	SNSTopicARN *string `locationName:"SnsTopicArn" type:"string"`

	// The event severity specified in the Amazon Redshift event notification subscription.
	//
	// Values: ERROR, INFO
	Severity *string `type:"string"`

	// A list of the sources that publish events to the Amazon Redshift event notification
	// subscription.
	SourceIDsList []*string `locationName:"SourceIdsList" locationNameList:"SourceId" type:"list"`

	// The source type of the events returned the Amazon Redshift event notification,
	// such as cluster, or cluster-snapshot.
	SourceType *string `type:"string"`

	// The status of the Amazon Redshift event notification subscription.
	//
	// Constraints:
	//
	//  Can be one of the following: active | no-permission | topic-not-exist The
	// status "no-permission" indicates that Amazon Redshift no longer has permission
	// to post to the Amazon SNS topic. The status "topic-not-exist" indicates that
	// the topic was deleted after the subscription was created.
	Status *string `type:"string"`

	// The date and time the Amazon Redshift event notification subscription was
	// created.
	SubscriptionCreationTime *time.Time `type:"timestamp" timestampFormat:"iso8601"`

	// The list of tags for the event subscription.
	Tags []*Tag `locationNameList:"Tag" type:"list"`
	// contains filtered or unexported fields
}

type HSMClientCertificate 

type HSMClientCertificate struct {
	// The identifier of the HSM client certificate.
	HSMClientCertificateIdentifier *string `locationName:"HsmClientCertificateIdentifier" type:"string"`

	// The public key that the Amazon Redshift cluster will use to connect to the
	// HSM. You must register the public key in the HSM.
	HSMClientCertificatePublicKey *string `locationName:"HsmClientCertificatePublicKey" type:"string"`

	// The list of tags for the HSM client certificate.
	Tags []*Tag `locationNameList:"Tag" type:"list"`
	// contains filtered or unexported fields
}

Returns information about an HSM client certificate. The certificate is stored in a secure Hardware Storage Module (HSM), and used by the Amazon Redshift cluster to encrypt data files.

type HSMConfiguration 

type HSMConfiguration struct {
	// A text description of the HSM configuration.
	Description *string `type:"string"`

	// The name of the Amazon Redshift HSM configuration.
	HSMConfigurationIdentifier *string `locationName:"HsmConfigurationIdentifier" type:"string"`

	// The IP address that the Amazon Redshift cluster must use to access the HSM.
	HSMIPAddress *string `locationName:"HsmIpAddress" type:"string"`

	// The name of the partition in the HSM where the Amazon Redshift clusters will
	// store their database encryption keys.
	HSMPartitionName *string `locationName:"HsmPartitionName" type:"string"`

	// The list of tags for the HSM configuration.
	Tags []*Tag `locationNameList:"Tag" type:"list"`
	// contains filtered or unexported fields
}

Returns information about an HSM configuration, which is an object that describes to Amazon Redshift clusters the information they require to connect to an HSM where they can store database encryption keys.

type HSMStatus 

type HSMStatus struct {
	// Specifies the name of the HSM client certificate the Amazon Redshift cluster
	// uses to retrieve the data encryption keys stored in an HSM.
	HSMClientCertificateIdentifier *string `locationName:"HsmClientCertificateIdentifier" type:"string"`

	// Specifies the name of the HSM configuration that contains the information
	// the Amazon Redshift cluster can use to retrieve and store keys in an HSM.
	HSMConfigurationIdentifier *string `locationName:"HsmConfigurationIdentifier" type:"string"`

	// Reports whether the Amazon Redshift cluster has finished applying any HSM
	// settings changes specified in a modify cluster command.
	//
	// Values: active, applying
	Status *string `type:"string"`
	// contains filtered or unexported fields
}

type IPRange 

type IPRange struct {
	// The IP range in Classless Inter-Domain Routing (CIDR) notation.
	CIDRIP *string `type:"string"`

	// The status of the IP range, for example, "authorized".
	Status *string `type:"string"`

	// The list of tags for the IP range.
	Tags []*Tag `locationNameList:"Tag" type:"list"`
	// contains filtered or unexported fields
}

Describes an IP range used in a security group.

type LoggingStatus 

type LoggingStatus struct {
	// The name of the S3 bucket where the log files are stored.
	BucketName *string `type:"string"`

	// The message indicating that logs failed to be delivered.
	LastFailureMessage *string `type:"string"`

	// The last time when logs failed to be delivered.
	LastFailureTime *time.Time `type:"timestamp" timestampFormat:"iso8601"`

	// The last time when logs were delivered.
	LastSuccessfulDeliveryTime *time.Time `type:"timestamp" timestampFormat:"iso8601"`

	// true if logging is on, false if logging is off.
	LoggingEnabled *bool `type:"boolean"`

	// The prefix applied to the log file names.
	S3KeyPrefix *string `type:"string"`
	// contains filtered or unexported fields
}

Describes the status of logging for a cluster.

type ModifyClusterInput 

type ModifyClusterInput struct {
	// If true, major version upgrades will be applied automatically to the cluster
	// during the maintenance window.
	//
	// Default: false
	AllowVersionUpgrade *bool `type:"boolean"`

	// The number of days that automated snapshots are retained. If the value is
	// 0, automated snapshots are disabled. Even if automated snapshots are disabled,
	// you can still create manual snapshots when you want with CreateClusterSnapshot.
	//
	//  If you decrease the automated snapshot retention period from its current
	// value, existing automated snapshots that fall outside of the new retention
	// period will be immediately deleted.
	//
	// Default: Uses existing setting.
	//
	// Constraints: Must be a value from 0 to 35.
	AutomatedSnapshotRetentionPeriod *int64 `type:"integer"`

	// The unique identifier of the cluster to be modified.
	//
	// Example: examplecluster
	ClusterIdentifier *string `type:"string" required:"true"`

	// The name of the cluster parameter group to apply to this cluster. This change
	// is applied only after the cluster is rebooted. To reboot a cluster use RebootCluster.
	//
	// Default: Uses existing setting.
	//
	// Constraints: The cluster parameter group must be in the same parameter group
	// family that matches the cluster version.
	ClusterParameterGroupName *string `type:"string"`

	// A list of cluster security groups to be authorized on this cluster. This
	// change is asynchronously applied as soon as possible.
	//
	// Security groups currently associated with the cluster, and not in the list
	// of groups to apply, will be revoked from the cluster.
	//
	// Constraints:
	//
	//  Must be 1 to 255 alphanumeric characters or hyphens First character must
	// be a letter Cannot end with a hyphen or contain two consecutive hyphens
	ClusterSecurityGroups []*string `locationNameList:"ClusterSecurityGroupName" type:"list"`

	// The new cluster type.
	//
	//  When you submit your cluster resize request, your existing cluster goes
	// into a read-only mode. After Amazon Redshift provisions a new cluster based
	// on your resize requirements, there will be outage for a period while the
	// old cluster is deleted and your connection is switched to the new cluster.
	// You can use DescribeResize to track the progress of the resize request.
	//
	// Valid Values:  multi-node | single-node
	ClusterType *string `type:"string"`

	// The new version number of the Amazon Redshift engine to upgrade to.
	//
	//  For major version upgrades, if a non-default cluster parameter group is
	// currently in use, a new cluster parameter group in the cluster parameter
	// group family for the new version must be specified. The new cluster parameter
	// group can be the default for that cluster parameter group family. For more
	// information about managing parameter groups, go to Amazon Redshift Parameter
	// Groups (http://docs.aws.amazon.com/redshift/latest/mgmt/working-with-parameter-groups.html)
	// in the Amazon Redshift Cluster Management Guide.
	//
	// Example: 1.0
	ClusterVersion *string `type:"string"`

	// Specifies the name of the HSM client certificate the Amazon Redshift cluster
	// uses to retrieve the data encryption keys stored in an HSM.
	HSMClientCertificateIdentifier *string `locationName:"HsmClientCertificateIdentifier" type:"string"`

	// Specifies the name of the HSM configuration that contains the information
	// the Amazon Redshift cluster can use to retrieve and store keys in an HSM.
	HSMConfigurationIdentifier *string `locationName:"HsmConfigurationIdentifier" type:"string"`

	// The new password for the cluster master user. This change is asynchronously
	// applied as soon as possible. Between the time of the request and the completion
	// of the request, the MasterUserPassword element exists in the PendingModifiedValues
	// element of the operation response.  Operations never return the password,
	// so this operation provides a way to regain access to the master user account
	// for a cluster if the password is lost.
	//
	// Default: Uses existing setting.
	//
	//  Constraints:
	//
	//  Must be between 8 and 64 characters in length. Must contain at least one
	// uppercase letter. Must contain at least one lowercase letter. Must contain
	// one number. Can be any printable ASCII character (ASCII code 33 to 126) except
	// ' (single quote), " (double quote), \, /, @, or space.
	MasterUserPassword *string `type:"string"`

	// The new identifier for the cluster.
	//
	// Constraints:
	//
	//  Must contain from 1 to 63 alphanumeric characters or hyphens. Alphabetic
	// characters must be lowercase. First character must be a letter. Cannot end
	// with a hyphen or contain two consecutive hyphens. Must be unique for all
	// clusters within an AWS account.  Example: examplecluster
	NewClusterIdentifier *string `type:"string"`

	// The new node type of the cluster. If you specify a new node type, you must
	// also specify the number of nodes parameter.
	//
	//  When you submit your request to resize a cluster, Amazon Redshift sets
	// access permissions for the cluster to read-only. After Amazon Redshift provisions
	// a new cluster according to your resize requirements, there will be a temporary
	// outage while the old cluster is deleted and your connection is switched to
	// the new cluster. When the new connection is complete, the original access
	// permissions for the cluster are restored. You can use DescribeResize to track
	// the progress of the resize request.
	//
	// Valid Values:  dw1.xlarge | dw1.8xlarge | dw2.large | dw2.8xlarge.
	NodeType *string `type:"string"`

	// The new number of nodes of the cluster. If you specify a new number of nodes,
	// you must also specify the node type parameter.
	//
	//  When you submit your request to resize a cluster, Amazon Redshift sets
	// access permissions for the cluster to read-only. After Amazon Redshift provisions
	// a new cluster according to your resize requirements, there will be a temporary
	// outage while the old cluster is deleted and your connection is switched to
	// the new cluster. When the new connection is complete, the original access
	// permissions for the cluster are restored. You can use DescribeResize to track
	// the progress of the resize request.
	//
	// Valid Values: Integer greater than 0.
	NumberOfNodes *int64 `type:"integer"`

	// The weekly time range (in UTC) during which system maintenance can occur,
	// if necessary. If system maintenance is necessary during the window, it may
	// result in an outage.
	//
	//  This maintenance window change is made immediately. If the new maintenance
	// window indicates the current time, there must be at least 120 minutes between
	// the current time and end of the window in order to ensure that pending changes
	// are applied.
	//
	// Default: Uses existing setting.
	//
	// Format: ddd:hh24:mi-ddd:hh24:mi, for example wed:07:30-wed:08:00.
	//
	// Valid Days: Mon | Tue | Wed | Thu | Fri | Sat | Sun
	//
	// Constraints: Must be at least 30 minutes.
	PreferredMaintenanceWindow *string `type:"string"`

	// A list of virtual private cloud (VPC) security groups to be associated with
	// the cluster.
	VPCSecurityGroupIDs []*string `locationName:"VpcSecurityGroupIds" locationNameList:"VpcSecurityGroupId" type:"list"`
	// contains filtered or unexported fields
}

type ModifyClusterOutput 

type ModifyClusterOutput struct {
	// Describes a cluster.
	Cluster *Cluster `type:"structure"`
	// contains filtered or unexported fields
}

type ModifyClusterParameterGroupInput 

type ModifyClusterParameterGroupInput struct {
	// The name of the parameter group to be modified.
	ParameterGroupName *string `type:"string" required:"true"`

	// An array of parameters to be modified. A maximum of 20 parameters can be
	// modified in a single request.
	//
	//  For each parameter to be modified, you must supply at least the parameter
	// name and parameter value; other name-value pairs of the parameter are optional.
	//
	//  For the workload management (WLM) configuration, you must supply all the
	// name-value pairs in the wlm_json_configuration parameter.
	Parameters []*Parameter `locationNameList:"Parameter" type:"list" required:"true"`
	// contains filtered or unexported fields
}

type ModifyClusterSubnetGroupInput 

type ModifyClusterSubnetGroupInput struct {
	// The name of the subnet group to be modified.
	ClusterSubnetGroupName *string `type:"string" required:"true"`

	// A text description of the subnet group to be modified.
	Description *string `type:"string"`

	// An array of VPC subnet IDs. A maximum of 20 subnets can be modified in a
	// single request.
	SubnetIDs []*string `locationName:"SubnetIds" locationNameList:"SubnetIdentifier" type:"list" required:"true"`
	// contains filtered or unexported fields
}

type ModifyClusterSubnetGroupOutput 

type ModifyClusterSubnetGroupOutput struct {
	// Describes a subnet group.
	ClusterSubnetGroup *ClusterSubnetGroup `type:"structure"`
	// contains filtered or unexported fields
}

type ModifyEventSubscriptionInput 

type ModifyEventSubscriptionInput struct {
	// A Boolean value indicating if the subscription is enabled. true indicates
	// the subscription is enabled
	Enabled *bool `type:"boolean"`

	// Specifies the Amazon Redshift event categories to be published by the event
	// notification subscription.
	//
	// Values: Configuration, Management, Monitoring, Security
	EventCategories []*string `locationNameList:"EventCategory" type:"list"`

	// The Amazon Resource Name (ARN) of the SNS topic to be used by the event notification
	// subscription.
	SNSTopicARN *string `locationName:"SnsTopicArn" type:"string"`

	// Specifies the Amazon Redshift event severity to be published by the event
	// notification subscription.
	//
	// Values: ERROR, INFO
	Severity *string `type:"string"`

	// A list of one or more identifiers of Amazon Redshift source objects. All
	// of the objects must be of the same type as was specified in the source type
	// parameter. The event subscription will return only events generated by the
	// specified objects. If not specified, then events are returned for all objects
	// within the source type specified.
	//
	// Example: my-cluster-1, my-cluster-2
	//
	// Example: my-snapshot-20131010
	SourceIDs []*string `locationName:"SourceIds" locationNameList:"SourceId" type:"list"`

	// The type of source that will be generating the events. For example, if you
	// want to be notified of events generated by a cluster, you would set this
	// parameter to cluster. If this value is not specified, events are returned
	// for all Amazon Redshift objects in your AWS account. You must specify a source
	// type in order to specify source IDs.
	//
	// Valid values: cluster, cluster-parameter-group, cluster-security-group,
	// and cluster-snapshot.
	SourceType *string `type:"string"`

	// The name of the modified Amazon Redshift event notification subscription.
	SubscriptionName *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

type ModifyEventSubscriptionOutput 

type ModifyEventSubscriptionOutput struct {
	EventSubscription *EventSubscription `type:"structure"`
	// contains filtered or unexported fields
}

type ModifySnapshotCopyRetentionPeriodInput 

type ModifySnapshotCopyRetentionPeriodInput struct {
	// The unique identifier of the cluster for which you want to change the retention
	// period for automated snapshots that are copied to a destination region.
	//
	//  Constraints: Must be the valid name of an existing cluster that has cross-region
	// snapshot copy enabled.
	ClusterIdentifier *string `type:"string" required:"true"`

	// The number of days to retain automated snapshots in the destination region
	// after they are copied from the source region.
	//
	//  If you decrease the retention period for automated snapshots that are copied
	// to a destination region, Amazon Redshift will delete any existing automated
	// snapshots that were copied to the destination region and that fall outside
	// of the new retention period.
	//
	//  Constraints: Must be at least 1 and no more than 35.
	RetentionPeriod *int64 `type:"integer" required:"true"`
	// contains filtered or unexported fields
}

type ModifySnapshotCopyRetentionPeriodOutput 

type ModifySnapshotCopyRetentionPeriodOutput struct {
	// Describes a cluster.
	Cluster *Cluster `type:"structure"`
	// contains filtered or unexported fields
}

type OrderableClusterOption 

type OrderableClusterOption struct {
	// A list of availability zones for the orderable cluster.
	AvailabilityZones []*AvailabilityZone `locationNameList:"AvailabilityZone" type:"list"`

	// The cluster type, for example multi-node.
	ClusterType *string `type:"string"`

	// The version of the orderable cluster.
	ClusterVersion *string `type:"string"`

	// The node type for the orderable cluster.
	NodeType *string `type:"string"`
	// contains filtered or unexported fields
}

Describes an orderable cluster option.

type Parameter 

type Parameter struct {
	// The valid range of values for the parameter.
	AllowedValues *string `type:"string"`

	// The data type of the parameter.
	DataType *string `type:"string"`

	// A description of the parameter.
	Description *string `type:"string"`

	// If true, the parameter can be modified. Some parameters have security or
	// operational implications that prevent them from being changed.
	IsModifiable *bool `type:"boolean"`

	// The earliest engine version to which the parameter can apply.
	MinimumEngineVersion *string `type:"string"`

	// The name of the parameter.
	ParameterName *string `type:"string"`

	// The value of the parameter.
	ParameterValue *string `type:"string"`

	// The source of the parameter value, such as "engine-default" or "user".
	Source *string `type:"string"`
	// contains filtered or unexported fields
}

Describes a parameter in a cluster parameter group.

type PendingModifiedValues 

type PendingModifiedValues struct {
	// The pending or in-progress change of the automated snapshot retention period.
	AutomatedSnapshotRetentionPeriod *int64 `type:"integer"`

	// The pending or in-progress change of the new identifier for the cluster.
	ClusterIdentifier *string `type:"string"`

	// The pending or in-progress change of the cluster type.
	ClusterType *string `type:"string"`

	// The pending or in-progress change of the service version.
	ClusterVersion *string `type:"string"`

	// The pending or in-progress change of the master user password for the cluster.
	MasterUserPassword *string `type:"string"`

	// The pending or in-progress change of the cluster's node type.
	NodeType *string `type:"string"`

	// The pending or in-progress change of the number of nodes in the cluster.
	NumberOfNodes *int64 `type:"integer"`
	// contains filtered or unexported fields
}

Describes cluster attributes that are in a pending state. A change to one or more the attributes was requested and is in progress or will be applied.

type PurchaseReservedNodeOfferingInput 

type PurchaseReservedNodeOfferingInput struct {
	// The number of reserved nodes you want to purchase.
	//
	// Default: 1
	NodeCount *int64 `type:"integer"`

	// The unique identifier of the reserved node offering you want to purchase.
	ReservedNodeOfferingID *string `locationName:"ReservedNodeOfferingId" type:"string" required:"true"`
	// contains filtered or unexported fields
}

type PurchaseReservedNodeOfferingOutput 

type PurchaseReservedNodeOfferingOutput struct {
	// Describes a reserved node.
	ReservedNode *ReservedNode `type:"structure"`
	// contains filtered or unexported fields
}

type RebootClusterInput 

type RebootClusterInput struct {
	// The cluster identifier.
	ClusterIdentifier *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

type RebootClusterOutput 

type RebootClusterOutput struct {
	// Describes a cluster.
	Cluster *Cluster `type:"structure"`
	// contains filtered or unexported fields
}

type RecurringCharge 

type RecurringCharge struct {
	// The amount charged per the period of time specified by the recurring charge
	// frequency.
	RecurringChargeAmount *float64 `type:"double"`

	// The frequency at which the recurring charge amount is applied.
	RecurringChargeFrequency *string `type:"string"`
	// contains filtered or unexported fields
}

Describes a recurring charge.

type Redshift 

type Redshift struct {
	*aws.Service
}

Redshift is a client for Amazon Redshift.

func New 

func New(config *aws.Config) *Redshift

New returns a new Redshift client.

func (*Redshift) AuthorizeClusterSecurityGroupIngress 

func (c *Redshift) AuthorizeClusterSecurityGroupIngress(input *AuthorizeClusterSecurityGroupIngressInput) (*AuthorizeClusterSecurityGroupIngressOutput, error)

Adds an inbound (ingress) rule to an Amazon Redshift security group. Depending on whether the application accessing your cluster is running on the Internet or an EC2 instance, you can authorize inbound access to either a Classless Interdomain Routing (CIDR) IP address range or an EC2 security group. You can add as many as 20 ingress rules to an Amazon Redshift security group. 

The EC2 security group must be defined in the AWS region where the cluster

resides. For an overview of CIDR blocks, see the Wikipedia article on Classless Inter-Domain Routing (http://en.wikipedia.org/wiki/Classless_Inter-Domain_Routing). 

You must also associate the security group with a cluster so that clients

running on these IP addresses or the EC2 instance are authorized to connect to the cluster. For information about managing security groups, go to Working with Security Groups (http://docs.aws.amazon.com/redshift/latest/mgmt/working-with-security-groups.html) in the Amazon Redshift Cluster Management Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/service/redshift"
)

func main() {
	svc := redshift.New(nil)

	params := &redshift.AuthorizeClusterSecurityGroupIngressInput{
		ClusterSecurityGroupName: aws.String("String"), // Required
		CIDRIP:                   aws.String("String"),
		EC2SecurityGroupName:     aws.String("String"),
		EC2SecurityGroupOwnerID:  aws.String("String"),
	}
	resp, err := svc.AuthorizeClusterSecurityGroupIngress(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS Error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.StringValue(resp))
}

Output:

func (*Redshift) AuthorizeClusterSecurityGroupIngressRequest 

func (c *Redshift) AuthorizeClusterSecurityGroupIngressRequest(input *AuthorizeClusterSecurityGroupIngressInput) (req *aws.Request, output *AuthorizeClusterSecurityGroupIngressOutput)

AuthorizeClusterSecurityGroupIngressRequest generates a request for the AuthorizeClusterSecurityGroupIngress operation.

func (*Redshift) AuthorizeSnapshotAccess 

func (c *Redshift) AuthorizeSnapshotAccess(input *AuthorizeSnapshotAccessInput) (*AuthorizeSnapshotAccessOutput, error)

Authorizes the specified AWS customer account to restore the specified snapshot. 

For more information about working with snapshots, go to Amazon Redshift

Snapshots (http://docs.aws.amazon.com/redshift/latest/mgmt/working-with-snapshots.html) in the Amazon Redshift Cluster Management Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/service/redshift"
)

func main() {
	svc := redshift.New(nil)

	params := &redshift.AuthorizeSnapshotAccessInput{
		AccountWithRestoreAccess:  aws.String("String"), // Required
		SnapshotIdentifier:        aws.String("String"), // Required
		SnapshotClusterIdentifier: aws.String("String"),
	}
	resp, err := svc.AuthorizeSnapshotAccess(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS Error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.StringValue(resp))
}

Output:

func (*Redshift) AuthorizeSnapshotAccessRequest 

func (c *Redshift) AuthorizeSnapshotAccessRequest(input *AuthorizeSnapshotAccessInput) (req *aws.Request, output *AuthorizeSnapshotAccessOutput)

AuthorizeSnapshotAccessRequest generates a request for the AuthorizeSnapshotAccess operation.

func (*Redshift) CopyClusterSnapshot 

func (c *Redshift) CopyClusterSnapshot(input *CopyClusterSnapshotInput) (*CopyClusterSnapshotOutput, error)

Copies the specified automated cluster snapshot to a new manual cluster snapshot. The source must be an automated snapshot and it must be in the available state. 

When you delete a cluster, Amazon Redshift deletes any automated snapshots

of the cluster. Also, when the retention period of the snapshot expires, Amazon Redshift automatically deletes it. If you want to keep an automated snapshot for a longer period, you can make a manual copy of the snapshot. Manual snapshots are retained until you delete them. 

For more information about working with snapshots, go to Amazon Redshift

Snapshots (http://docs.aws.amazon.com/redshift/latest/mgmt/working-with-snapshots.html) in the Amazon Redshift Cluster Management Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/service/redshift"
)

func main() {
	svc := redshift.New(nil)

	params := &redshift.CopyClusterSnapshotInput{
		SourceSnapshotIdentifier:        aws.String("String"), // Required
		TargetSnapshotIdentifier:        aws.String("String"), // Required
		SourceSnapshotClusterIdentifier: aws.String("String"),
	}
	resp, err := svc.CopyClusterSnapshot(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS Error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.StringValue(resp))
}

Output:

func (*Redshift) CopyClusterSnapshotRequest 

func (c *Redshift) CopyClusterSnapshotRequest(input *CopyClusterSnapshotInput) (req *aws.Request, output *CopyClusterSnapshotOutput)

CopyClusterSnapshotRequest generates a request for the CopyClusterSnapshot operation.

func (*Redshift) CreateCluster 

func (c *Redshift) CreateCluster(input *CreateClusterInput) (*CreateClusterOutput, error)

Creates a new cluster. To create the cluster in virtual private cloud (VPC), you must provide cluster subnet group name. If you don't provide a cluster subnet group name or the cluster security group parameter, Amazon Redshift creates a non-VPC cluster, it associates the default cluster security group with the cluster. For more information about managing clusters, go to Amazon Redshift Clusters (http://docs.aws.amazon.com/redshift/latest/mgmt/working-with-clusters.html) in the Amazon Redshift Cluster Management Guide .

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/service/redshift"
)

func main() {
	svc := redshift.New(nil)

	params := &redshift.CreateClusterInput{
		ClusterIdentifier:                aws.String("String"), // Required
		MasterUserPassword:               aws.String("String"), // Required
		MasterUsername:                   aws.String("String"), // Required
		NodeType:                         aws.String("String"), // Required
		AllowVersionUpgrade:              aws.Boolean(true),
		AutomatedSnapshotRetentionPeriod: aws.Long(1),
		AvailabilityZone:                 aws.String("String"),
		ClusterParameterGroupName:        aws.String("String"),
		ClusterSecurityGroups: []*string{
			aws.String("String"), // Required
			// More values...
		},
		ClusterSubnetGroupName:         aws.String("String"),
		ClusterType:                    aws.String("String"),
		ClusterVersion:                 aws.String("String"),
		DBName:                         aws.String("String"),
		ElasticIP:                      aws.String("String"),
		Encrypted:                      aws.Boolean(true),
		HSMClientCertificateIdentifier: aws.String("String"),
		HSMConfigurationIdentifier:     aws.String("String"),
		KMSKeyID:                       aws.String("String"),
		NumberOfNodes:                  aws.Long(1),
		Port:                           aws.Long(1),
		PreferredMaintenanceWindow:     aws.String("String"),
		PubliclyAccessible:             aws.Boolean(true),
		Tags: []*redshift.Tag{
			{ // Required
				Key:   aws.String("String"),
				Value: aws.String("String"),
			},
			// More values...
		},
		VPCSecurityGroupIDs: []*string{
			aws.String("String"), // Required
			// More values...
		},
	}
	resp, err := svc.CreateCluster(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS Error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.StringValue(resp))
}

Output:

func (*Redshift) CreateClusterParameterGroup 

func (c *Redshift) CreateClusterParameterGroup(input *CreateClusterParameterGroupInput) (*CreateClusterParameterGroupOutput, error)

Creates an Amazon Redshift parameter group.

Creating parameter groups is independent of creating clusters. You can associate a cluster with a parameter group when you create the cluster. You can also associate an existing cluster with a parameter group after the cluster is created by using ModifyCluster. 

Parameters in the parameter group define specific behavior that applies

to the databases you create on the cluster. For more information about managing parameter groups, go to Amazon Redshift Parameter Groups (http://docs.aws.amazon.com/redshift/latest/mgmt/working-with-parameter-groups.html) in the Amazon Redshift Cluster Management Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/service/redshift"
)

func main() {
	svc := redshift.New(nil)

	params := &redshift.CreateClusterParameterGroupInput{
		Description:          aws.String("String"), // Required
		ParameterGroupFamily: aws.String("String"), // Required
		ParameterGroupName:   aws.String("String"), // Required
		Tags: []*redshift.Tag{
			{ // Required
				Key:   aws.String("String"),
				Value: aws.String("String"),
			},
			// More values...
		},
	}
	resp, err := svc.CreateClusterParameterGroup(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS Error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.StringValue(resp))
}

Output:

func (*Redshift) CreateClusterParameterGroupRequest 

func (c *Redshift) CreateClusterParameterGroupRequest(input *CreateClusterParameterGroupInput) (req *aws.Request, output *CreateClusterParameterGroupOutput)

CreateClusterParameterGroupRequest generates a request for the CreateClusterParameterGroup operation.

func (*Redshift) CreateClusterRequest 

func (c *Redshift) CreateClusterRequest(input *CreateClusterInput) (req *aws.Request, output *CreateClusterOutput)

CreateClusterRequest generates a request for the CreateCluster operation.

func (*Redshift) CreateClusterSecurityGroup 

func (c *Redshift) CreateClusterSecurityGroup(input *CreateClusterSecurityGroupInput) (*CreateClusterSecurityGroupOutput, error)

Creates a new Amazon Redshift security group. You use security groups to control access to non-VPC clusters. 

For information about managing security groups, go to Amazon Redshift Cluster

Security Groups (http://docs.aws.amazon.com/redshift/latest/mgmt/working-with-security-groups.html) in the Amazon Redshift Cluster Management Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/service/redshift"
)

func main() {
	svc := redshift.New(nil)

	params := &redshift.CreateClusterSecurityGroupInput{
		ClusterSecurityGroupName: aws.String("String"), // Required
		Description:              aws.String("String"), // Required
		Tags: []*redshift.Tag{
			{ // Required
				Key:   aws.String("String"),
				Value: aws.String("String"),
			},
			// More values...
		},
	}
	resp, err := svc.CreateClusterSecurityGroup(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS Error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.StringValue(resp))
}

Output:

func (*Redshift) CreateClusterSecurityGroupRequest 

func (c *Redshift) CreateClusterSecurityGroupRequest(input *CreateClusterSecurityGroupInput) (req *aws.Request, output *CreateClusterSecurityGroupOutput)

CreateClusterSecurityGroupRequest generates a request for the CreateClusterSecurityGroup operation.

func (*Redshift) CreateClusterSnapshot 

func (c *Redshift) CreateClusterSnapshot(input *CreateClusterSnapshotInput) (*CreateClusterSnapshotOutput, error)

Creates a manual snapshot of the specified cluster. The cluster must be in the available state. 

For more information about working with snapshots, go to Amazon Redshift

Snapshots (http://docs.aws.amazon.com/redshift/latest/mgmt/working-with-snapshots.html) in the Amazon Redshift Cluster Management Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/service/redshift"
)

func main() {
	svc := redshift.New(nil)

	params := &redshift.CreateClusterSnapshotInput{
		ClusterIdentifier:  aws.String("String"), // Required
		SnapshotIdentifier: aws.String("String"), // Required
		Tags: []*redshift.Tag{
			{ // Required
				Key:   aws.String("String"),
				Value: aws.String("String"),
			},
			// More values...
		},
	}
	resp, err := svc.CreateClusterSnapshot(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS Error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.StringValue(resp))
}

Output:

func (*Redshift) CreateClusterSnapshotRequest 

func (c *Redshift) CreateClusterSnapshotRequest(input *CreateClusterSnapshotInput) (req *aws.Request, output *CreateClusterSnapshotOutput)

CreateClusterSnapshotRequest generates a request for the CreateClusterSnapshot operation.

func (*Redshift) CreateClusterSubnetGroup 

func (c *Redshift) CreateClusterSubnetGroup(input *CreateClusterSubnetGroupInput) (*CreateClusterSubnetGroupOutput, error)

Creates a new Amazon Redshift subnet group. You must provide a list of one or more subnets in your existing Amazon Virtual Private Cloud (Amazon VPC) when creating Amazon Redshift subnet group. 

For information about subnet groups, go to Amazon Redshift Cluster Subnet

Groups (http://docs.aws.amazon.com/redshift/latest/mgmt/working-with-cluster-subnet-groups.html) in the Amazon Redshift Cluster Management Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/service/redshift"
)

func main() {
	svc := redshift.New(nil)

	params := &redshift.CreateClusterSubnetGroupInput{
		ClusterSubnetGroupName: aws.String("String"), // Required
		Description:            aws.String("String"), // Required
		SubnetIDs: []*string{ // Required
			aws.String("String"), // Required
			// More values...
		},
		Tags: []*redshift.Tag{
			{ // Required
				Key:   aws.String("String"),
				Value: aws.String("String"),
			},
			// More values...
		},
	}
	resp, err := svc.CreateClusterSubnetGroup(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS Error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.StringValue(resp))
}

Output:

func (*Redshift) CreateClusterSubnetGroupRequest 

func (c *Redshift) CreateClusterSubnetGroupRequest(input *CreateClusterSubnetGroupInput) (req *aws.Request, output *CreateClusterSubnetGroupOutput)

CreateClusterSubnetGroupRequest generates a request for the CreateClusterSubnetGroup operation.

func (*Redshift) CreateEventSubscription 

func (c *Redshift) CreateEventSubscription(input *CreateEventSubscriptionInput) (*CreateEventSubscriptionOutput, error)

Creates an Amazon Redshift event notification subscription. This action requires an ARN (Amazon Resource Name) of an Amazon SNS topic created by either the Amazon Redshift console, the Amazon SNS console, or the Amazon SNS API. To obtain an ARN with Amazon SNS, you must create a topic in Amazon SNS and subscribe to the topic. The ARN is displayed in the SNS console. 

You can specify the source type, and lists of Amazon Redshift source IDs,

event categories, and event severities. Notifications will be sent for all events you want that match those criteria. For example, you can specify source type = cluster, source ID = my-cluster-1 and mycluster2, event categories = Availability, Backup, and severity = ERROR. The subscription will only send notifications for those ERROR events in the Availability and Backup categories for the specified clusters. 

If you specify both the source type and source IDs, such as source type

= cluster and source identifier = my-cluster-1, notifications will be sent for all the cluster events for my-cluster-1. If you specify a source type but do not specify a source identifier, you will receive notice of the events for the objects of that type in your AWS account. If you do not specify either the SourceType nor the SourceIdentifier, you will be notified of events generated from all Amazon Redshift sources belonging to your AWS account. You must specify a source type if you specify a source ID.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/service/redshift"
)

func main() {
	svc := redshift.New(nil)

	params := &redshift.CreateEventSubscriptionInput{
		SNSTopicARN:      aws.String("String"), // Required
		SubscriptionName: aws.String("String"), // Required
		Enabled:          aws.Boolean(true),
		EventCategories: []*string{
			aws.String("String"), // Required
			// More values...
		},
		Severity: aws.String("String"),
		SourceIDs: []*string{
			aws.String("String"), // Required
			// More values...
		},
		SourceType: aws.String("String"),
		Tags: []*redshift.Tag{
			{ // Required
				Key:   aws.String("String"),
				Value: aws.String("String"),
			},
			// More values...
		},
	}
	resp, err := svc.CreateEventSubscription(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS Error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.StringValue(resp))
}

Output:

func (*Redshift) CreateEventSubscriptionRequest 

func (c *Redshift) CreateEventSubscriptionRequest(input *CreateEventSubscriptionInput) (req *aws.Request, output *CreateEventSubscriptionOutput)

CreateEventSubscriptionRequest generates a request for the CreateEventSubscription operation.

func (*Redshift) CreateHSMClientCertificate 

func (c *Redshift) CreateHSMClientCertificate(input *CreateHSMClientCertificateInput) (*CreateHSMClientCertificateOutput, error)

Creates an HSM client certificate that an Amazon Redshift cluster will use to connect to the client's HSM in order to store and retrieve the keys used to encrypt the cluster databases.

The command returns a public key, which you must store in the HSM. In addition to creating the HSM certificate, you must create an Amazon Redshift HSM configuration that provides a cluster the information needed to store and use encryption keys in the HSM. For more information, go to Hardware Security Modules (http://docs.aws.amazon.com/redshift/latest/mgmt/working-with-HSM.html) in the Amazon Redshift Cluster Management Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/service/redshift"
)

func main() {
	svc := redshift.New(nil)

	params := &redshift.CreateHSMClientCertificateInput{
		HSMClientCertificateIdentifier: aws.String("String"), // Required
		Tags: []*redshift.Tag{
			{ // Required
				Key:   aws.String("String"),
				Value: aws.String("String"),
			},
			// More values...
		},
	}
	resp, err := svc.CreateHSMClientCertificate(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS Error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.StringValue(resp))
}

Output:

func (*Redshift) CreateHSMClientCertificateRequest 

func (c *Redshift) CreateHSMClientCertificateRequest(input *CreateHSMClientCertificateInput) (req *aws.Request, output *CreateHSMClientCertificateOutput)

CreateHSMClientCertificateRequest generates a request for the CreateHSMClientCertificate operation.

func (*Redshift) CreateHSMConfiguration 

func (c *Redshift) CreateHSMConfiguration(input *CreateHSMConfigurationInput) (*CreateHSMConfigurationOutput, error)

Creates an HSM configuration that contains the information required by an Amazon Redshift cluster to store and use database encryption keys in a Hardware Security Module (HSM). After creating the HSM configuration, you can specify it as a parameter when creating a cluster. The cluster will then store its encryption keys in the HSM.

In addition to creating an HSM configuration, you must also create an HSM client certificate. For more information, go to Hardware Security Modules (http://docs.aws.amazon.com/redshift/latest/mgmt/working-with-HSM.html) in the Amazon Redshift Cluster Management Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/service/redshift"
)

func main() {
	svc := redshift.New(nil)

	params := &redshift.CreateHSMConfigurationInput{
		Description:                aws.String("String"), // Required
		HSMConfigurationIdentifier: aws.String("String"), // Required
		HSMIPAddress:               aws.String("String"), // Required
		HSMPartitionName:           aws.String("String"), // Required
		HSMPartitionPassword:       aws.String("String"), // Required
		HSMServerPublicCertificate: aws.String("String"), // Required
		Tags: []*redshift.Tag{
			{ // Required
				Key:   aws.String("String"),
				Value: aws.String("String"),
			},
			// More values...
		},
	}
	resp, err := svc.CreateHSMConfiguration(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS Error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.StringValue(resp))
}

Output:

func (*Redshift) CreateHSMConfigurationRequest 

func (c *Redshift) CreateHSMConfigurationRequest(input *CreateHSMConfigurationInput) (req *aws.Request, output *CreateHSMConfigurationOutput)

CreateHSMConfigurationRequest generates a request for the CreateHSMConfiguration operation.

func (*Redshift) CreateTags 

func (c *Redshift) CreateTags(input *CreateTagsInput) (*CreateTagsOutput, error)

Adds one or more tags to a specified resource. 

A resource can have up to 10 tags. If you try to create more than 10 tags

for a resource, you will receive an error and the attempt will fail. 

If you specify a key that already exists for the resource, the value for

that key will be updated with the new value.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/service/redshift"
)

func main() {
	svc := redshift.New(nil)

	params := &redshift.CreateTagsInput{
		ResourceName: aws.String("String"), // Required
		Tags: []*redshift.Tag{ // Required
			{ // Required
				Key:   aws.String("String"),
				Value: aws.String("String"),
			},
			// More values...
		},
	}
	resp, err := svc.CreateTags(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS Error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.StringValue(resp))
}

Output:

func (*Redshift) CreateTagsRequest 

func (c *Redshift) CreateTagsRequest(input *CreateTagsInput) (req *aws.Request, output *CreateTagsOutput)

CreateTagsRequest generates a request for the CreateTags operation.

func (*Redshift) DeleteCluster 

func (c *Redshift) DeleteCluster(input *DeleteClusterInput) (*DeleteClusterOutput, error)

Deletes a previously provisioned cluster. A successful response from the web service indicates that the request was received correctly. Use DescribeClusters to monitor the status of the deletion. The delete operation cannot be canceled or reverted once submitted. For more information about managing clusters, go to Amazon Redshift Clusters (http://docs.aws.amazon.com/redshift/latest/mgmt/working-with-clusters.html) in the Amazon Redshift Cluster Management Guide . 

If you want to shut down the cluster and retain it for future use, set

SkipFinalClusterSnapshot to false and specify a name for FinalClusterSnapshotIdentifier. You can later restore this snapshot to resume using the cluster. If a final cluster snapshot is requested, the status of the cluster will be "final-snapshot" while the snapshot is being taken, then it's "deleting" once Amazon Redshift begins deleting the cluster. 

For more information about managing clusters, go to Amazon Redshift Clusters

(http://docs.aws.amazon.com/redshift/latest/mgmt/working-with-clusters.html) in the Amazon Redshift Cluster Management Guide .

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/service/redshift"
)

func main() {
	svc := redshift.New(nil)

	params := &redshift.DeleteClusterInput{
		ClusterIdentifier:              aws.String("String"), // Required
		FinalClusterSnapshotIdentifier: aws.String("String"),
		SkipFinalClusterSnapshot:       aws.Boolean(true),
	}
	resp, err := svc.DeleteCluster(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS Error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.StringValue(resp))
}

Output:

func (*Redshift) DeleteClusterParameterGroup 

func (c *Redshift) DeleteClusterParameterGroup(input *DeleteClusterParameterGroupInput) (*DeleteClusterParameterGroupOutput, error)

Deletes a specified Amazon Redshift parameter group. You cannot delete a parameter group if it is associated with a cluster.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/service/redshift"
)

func main() {
	svc := redshift.New(nil)

	params := &redshift.DeleteClusterParameterGroupInput{
		ParameterGroupName: aws.String("String"), // Required
	}
	resp, err := svc.DeleteClusterParameterGroup(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS Error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.StringValue(resp))
}

Output:

func (*Redshift) DeleteClusterParameterGroupRequest 

func (c *Redshift) DeleteClusterParameterGroupRequest(input *DeleteClusterParameterGroupInput) (req *aws.Request, output *DeleteClusterParameterGroupOutput)

DeleteClusterParameterGroupRequest generates a request for the DeleteClusterParameterGroup operation.

func (*Redshift) DeleteClusterRequest 

func (c *Redshift) DeleteClusterRequest(input *DeleteClusterInput) (req *aws.Request, output *DeleteClusterOutput)

DeleteClusterRequest generates a request for the DeleteCluster operation.

func (*Redshift) DeleteClusterSecurityGroup 

func (c *Redshift) DeleteClusterSecurityGroup(input *DeleteClusterSecurityGroupInput) (*DeleteClusterSecurityGroupOutput, error)

Deletes an Amazon Redshift security group.

You cannot delete a security group that is associated with any clusters. You cannot delete the default security group. For information about managing security groups, go to Amazon Redshift Cluster Security Groups (http://docs.aws.amazon.com/redshift/latest/mgmt/working-with-security-groups.html) in the Amazon Redshift Cluster Management Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/service/redshift"
)

func main() {
	svc := redshift.New(nil)

	params := &redshift.DeleteClusterSecurityGroupInput{
		ClusterSecurityGroupName: aws.String("String"), // Required
	}
	resp, err := svc.DeleteClusterSecurityGroup(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS Error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.StringValue(resp))
}

Output:

func (*Redshift) DeleteClusterSecurityGroupRequest 

func (c *Redshift) DeleteClusterSecurityGroupRequest(input *DeleteClusterSecurityGroupInput) (req *aws.Request, output *DeleteClusterSecurityGroupOutput)

DeleteClusterSecurityGroupRequest generates a request for the DeleteClusterSecurityGroup operation.

func (*Redshift) DeleteClusterSnapshot 

func (c *Redshift) DeleteClusterSnapshot(input *DeleteClusterSnapshotInput) (*DeleteClusterSnapshotOutput, error)

Deletes the specified manual snapshot. The snapshot must be in the available state, with no other users authorized to access the snapshot. 

Unlike automated snapshots, manual snapshots are retained even after you

delete your cluster. Amazon Redshift does not delete your manual snapshots. You must delete manual snapshot explicitly to avoid getting charged. If other accounts are authorized to access the snapshot, you must revoke all of the authorizations before you can delete the snapshot.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/service/redshift"
)

func main() {
	svc := redshift.New(nil)

	params := &redshift.DeleteClusterSnapshotInput{
		SnapshotIdentifier:        aws.String("String"), // Required
		SnapshotClusterIdentifier: aws.String("String"),
	}
	resp, err := svc.DeleteClusterSnapshot(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS Error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.StringValue(resp))
}

Output:

func (*Redshift) DeleteClusterSnapshotRequest 

func (c *Redshift) DeleteClusterSnapshotRequest(input *DeleteClusterSnapshotInput) (req *aws.Request, output *DeleteClusterSnapshotOutput)

DeleteClusterSnapshotRequest generates a request for the DeleteClusterSnapshot operation.

func (*Redshift) DeleteClusterSubnetGroup 

func (c *Redshift) DeleteClusterSubnetGroup(input *DeleteClusterSubnetGroupInput) (*DeleteClusterSubnetGroupOutput, error)

Deletes the specified cluster subnet group.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/service/redshift"
)

func main() {
	svc := redshift.New(nil)

	params := &redshift.DeleteClusterSubnetGroupInput{
		ClusterSubnetGroupName: aws.String("String"), // Required
	}
	resp, err := svc.DeleteClusterSubnetGroup(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS Error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.StringValue(resp))
}

Output:

func (*Redshift) DeleteClusterSubnetGroupRequest 

func (c *Redshift) DeleteClusterSubnetGroupRequest(input *DeleteClusterSubnetGroupInput) (req *aws.Request, output *DeleteClusterSubnetGroupOutput)

DeleteClusterSubnetGroupRequest generates a request for the DeleteClusterSubnetGroup operation.

func (*Redshift) DeleteEventSubscription 

func (c *Redshift) DeleteEventSubscription(input *DeleteEventSubscriptionInput) (*DeleteEventSubscriptionOutput, error)

Deletes an Amazon Redshift event notification subscription.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/service/redshift"
)

func main() {
	svc := redshift.New(nil)

	params := &redshift.DeleteEventSubscriptionInput{
		SubscriptionName: aws.String("String"), // Required
	}
	resp, err := svc.DeleteEventSubscription(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS Error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.StringValue(resp))
}

Output:

func (*Redshift) DeleteEventSubscriptionRequest 

func (c *Redshift) DeleteEventSubscriptionRequest(input *DeleteEventSubscriptionInput) (req *aws.Request, output *DeleteEventSubscriptionOutput)

DeleteEventSubscriptionRequest generates a request for the DeleteEventSubscription operation.

func (*Redshift) DeleteHSMClientCertificate 

func (c *Redshift) DeleteHSMClientCertificate(input *DeleteHSMClientCertificateInput) (*DeleteHSMClientCertificateOutput, error)

Deletes the specified HSM client certificate.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/service/redshift"
)

func main() {
	svc := redshift.New(nil)

	params := &redshift.DeleteHSMClientCertificateInput{
		HSMClientCertificateIdentifier: aws.String("String"), // Required
	}
	resp, err := svc.DeleteHSMClientCertificate(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS Error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.StringValue(resp))
}

Output:

func (*Redshift) DeleteHSMClientCertificateRequest 

func (c *Redshift) DeleteHSMClientCertificateRequest(input *DeleteHSMClientCertificateInput) (req *aws.Request, output *DeleteHSMClientCertificateOutput)

DeleteHSMClientCertificateRequest generates a request for the DeleteHSMClientCertificate operation.

func (*Redshift) DeleteHSMConfiguration 

func (c *Redshift) DeleteHSMConfiguration(input *DeleteHSMConfigurationInput) (*DeleteHSMConfigurationOutput, error)

Deletes the specified Amazon Redshift HSM configuration.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/service/redshift"
)

func main() {
	svc := redshift.New(nil)

	params := &redshift.DeleteHSMConfigurationInput{
		HSMConfigurationIdentifier: aws.String("String"), // Required
	}
	resp, err := svc.DeleteHSMConfiguration(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS Error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.StringValue(resp))
}

Output:

func (*Redshift) DeleteHSMConfigurationRequest 

func (c *Redshift) DeleteHSMConfigurationRequest(input *DeleteHSMConfigurationInput) (req *aws.Request, output *DeleteHSMConfigurationOutput)

DeleteHSMConfigurationRequest generates a request for the DeleteHSMConfiguration operation.

func (*Redshift) DeleteTags 

func (c *Redshift) DeleteTags(input *DeleteTagsInput) (*DeleteTagsOutput, error)

Deletes a tag or tags from a resource. You must provide the ARN of the resource from which you want to delete the tag or tags.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/service/redshift"
)

func main() {
	svc := redshift.New(nil)

	params := &redshift.DeleteTagsInput{
		ResourceName: aws.String("String"), // Required
		TagKeys: []*string{ // Required
			aws.String("String"), // Required
			// More values...
		},
	}
	resp, err := svc.DeleteTags(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS Error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.StringValue(resp))
}

Output:

func (*Redshift) DeleteTagsRequest 

func (c *Redshift) DeleteTagsRequest(input *DeleteTagsInput) (req *aws.Request, output *DeleteTagsOutput)

DeleteTagsRequest generates a request for the DeleteTags operation.

func (*Redshift) DescribeClusterParameterGroups 

func (c *Redshift) DescribeClusterParameterGroups(input *DescribeClusterParameterGroupsInput) (*DescribeClusterParameterGroupsOutput, error)

Returns a list of Amazon Redshift parameter groups, including parameter groups you created and the default parameter group. For each parameter group, the response includes the parameter group name, description, and parameter group family name. You can optionally specify a name to retrieve the description of a specific parameter group. 

For more information about managing parameter groups, go to Amazon Redshift

Parameter Groups (http://docs.aws.amazon.com/redshift/latest/mgmt/working-with-parameter-groups.html) in the Amazon Redshift Cluster Management Guide.

If you specify both tag keys and tag values in the same request, Amazon Redshift returns all parameter groups that match any combination of the specified keys and values. For example, if you have owner and environment for tag keys, and admin and test for tag values, all parameter groups that have any combination of those values are returned.

If both tag keys and values are omitted from the request, parameter groups are returned regardless of whether they have tag keys or values associated with them.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/service/redshift"
)

func main() {
	svc := redshift.New(nil)

	params := &redshift.DescribeClusterParameterGroupsInput{
		Marker:             aws.String("String"),
		MaxRecords:         aws.Long(1),
		ParameterGroupName: aws.String("String"),
		TagKeys: []*string{
			aws.String("String"), // Required
			// More values...
		},
		TagValues: []*string{
			aws.String("String"), // Required
			// More values...
		},
	}
	resp, err := svc.DescribeClusterParameterGroups(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS Error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.StringValue(resp))
}

Output:

func (*Redshift) DescribeClusterParameterGroupsPages 

func (c *Redshift) DescribeClusterParameterGroupsPages(input *DescribeClusterParameterGroupsInput, fn func(p *DescribeClusterParameterGroupsOutput, lastPage bool) (shouldContinue bool)) error

func (*Redshift) DescribeClusterParameterGroupsRequest 

func (c *Redshift) DescribeClusterParameterGroupsRequest(input *DescribeClusterParameterGroupsInput) (req *aws.Request, output *DescribeClusterParameterGroupsOutput)

DescribeClusterParameterGroupsRequest generates a request for the DescribeClusterParameterGroups operation.

func (*Redshift) DescribeClusterParameters 

func (c *Redshift) DescribeClusterParameters(input *DescribeClusterParametersInput) (*DescribeClusterParametersOutput, error)

Returns a detailed list of parameters contained within the specified Amazon Redshift parameter group. For each parameter the response includes information such as parameter name, description, data type, value, whether the parameter value is modifiable, and so on.

You can specify source filter to retrieve parameters of only specific type. For example, to retrieve parameters that were modified by a user action such as from ModifyClusterParameterGroup, you can specify source equal to user. 

For more information about managing parameter groups, go to Amazon Redshift

Parameter Groups (http://docs.aws.amazon.com/redshift/latest/mgmt/working-with-parameter-groups.html) in the Amazon Redshift Cluster Management Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/service/redshift"
)

func main() {
	svc := redshift.New(nil)

	params := &redshift.DescribeClusterParametersInput{
		ParameterGroupName: aws.String("String"), // Required
		Marker:             aws.String("String"),
		MaxRecords:         aws.Long(1),
		Source:             aws.String("String"),
	}
	resp, err := svc.DescribeClusterParameters(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS Error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.StringValue(resp))
}

Output:

func (*Redshift) DescribeClusterParametersPages 

func (c *Redshift) DescribeClusterParametersPages(input *DescribeClusterParametersInput, fn func(p *DescribeClusterParametersOutput, lastPage bool) (shouldContinue bool)) error

func (*Redshift) DescribeClusterParametersRequest 

func (c *Redshift) DescribeClusterParametersRequest(input *DescribeClusterParametersInput) (req *aws.Request, output *DescribeClusterParametersOutput)

DescribeClusterParametersRequest generates a request for the DescribeClusterParameters operation.

func (*Redshift) DescribeClusterSecurityGroups 

func (c *Redshift) DescribeClusterSecurityGroups(input *DescribeClusterSecurityGroupsInput) (*DescribeClusterSecurityGroupsOutput, error)

Returns information about Amazon Redshift security groups. If the name of a security group is specified, the response will contain only information about only that security group. 

For information about managing security groups, go to Amazon Redshift Cluster

Security Groups (http://docs.aws.amazon.com/redshift/latest/mgmt/working-with-security-groups.html) in the Amazon Redshift Cluster Management Guide.

If you specify both tag keys and tag values in the same request, Amazon Redshift returns all security groups that match any combination of the specified keys and values. For example, if you have owner and environment for tag keys, and admin and test for tag values, all security groups that have any combination of those values are returned.

If both tag keys and values are omitted from the request, security groups are returned regardless of whether they have tag keys or values associated with them.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/service/redshift"
)

func main() {
	svc := redshift.New(nil)

	params := &redshift.DescribeClusterSecurityGroupsInput{
		ClusterSecurityGroupName: aws.String("String"),
		Marker:                   aws.String("String"),
		MaxRecords:               aws.Long(1),
		TagKeys: []*string{
			aws.String("String"), // Required
			// More values...
		},
		TagValues: []*string{
			aws.String("String"), // Required
			// More values...
		},
	}
	resp, err := svc.DescribeClusterSecurityGroups(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS Error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.StringValue(resp))
}

Output:

func (*Redshift) DescribeClusterSecurityGroupsPages 

func (c *Redshift) DescribeClusterSecurityGroupsPages(input *DescribeClusterSecurityGroupsInput, fn func(p *DescribeClusterSecurityGroupsOutput, lastPage bool) (shouldContinue bool)) error

func (*Redshift) DescribeClusterSecurityGroupsRequest 

func (c *Redshift) DescribeClusterSecurityGroupsRequest(input *DescribeClusterSecurityGroupsInput) (req *aws.Request, output *DescribeClusterSecurityGroupsOutput)

DescribeClusterSecurityGroupsRequest generates a request for the DescribeClusterSecurityGroups operation.

func (*Redshift) DescribeClusterSnapshots 

func (c *Redshift) DescribeClusterSnapshots(input *DescribeClusterSnapshotsInput) (*DescribeClusterSnapshotsOutput, error)

Returns one or more snapshot objects, which contain metadata about your cluster snapshots. By default, this operation returns information about all snapshots of all clusters that are owned by you AWS customer account. No information is returned for snapshots owned by inactive AWS customer accounts.

If you specify both tag keys and tag values in the same request, Amazon Redshift returns all snapshots that match any combination of the specified keys and values. For example, if you have owner and environment for tag keys, and admin and test for tag values, all snapshots that have any combination of those values are returned. Only snapshots that you own are returned in the response; shared snapshots are not returned with the tag key and tag value request parameters.

If both tag keys and values are omitted from the request, snapshots are returned regardless of whether they have tag keys or values associated with them.

Example 
package main

import (
	"fmt"
	"time"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/service/redshift"
)

func main() {
	svc := redshift.New(nil)

	params := &redshift.DescribeClusterSnapshotsInput{
		ClusterIdentifier:  aws.String("String"),
		EndTime:            aws.Time(time.Now()),
		Marker:             aws.String("String"),
		MaxRecords:         aws.Long(1),
		OwnerAccount:       aws.String("String"),
		SnapshotIdentifier: aws.String("String"),
		SnapshotType:       aws.String("String"),
		StartTime:          aws.Time(time.Now()),
		TagKeys: []*string{
			aws.String("String"), // Required
			// More values...
		},
		TagValues: []*string{
			aws.String("String"), // Required
			// More values...
		},
	}
	resp, err := svc.DescribeClusterSnapshots(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS Error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.StringValue(resp))
}

Output:

func (*Redshift) DescribeClusterSnapshotsPages 

func (c *Redshift) DescribeClusterSnapshotsPages(input *DescribeClusterSnapshotsInput, fn func(p *DescribeClusterSnapshotsOutput, lastPage bool) (shouldContinue bool)) error

func (*Redshift) DescribeClusterSnapshotsRequest 

func (c *Redshift) DescribeClusterSnapshotsRequest(input *DescribeClusterSnapshotsInput) (req *aws.Request, output *DescribeClusterSnapshotsOutput)

DescribeClusterSnapshotsRequest generates a request for the DescribeClusterSnapshots operation.

func (*Redshift) DescribeClusterSubnetGroups 

func (c *Redshift) DescribeClusterSubnetGroups(input *DescribeClusterSubnetGroupsInput) (*DescribeClusterSubnetGroupsOutput, error)

Returns one or more cluster subnet group objects, which contain metadata about your cluster subnet groups. By default, this operation returns information about all cluster subnet groups that are defined in you AWS account.

If you specify both tag keys and tag values in the same request, Amazon Redshift returns all subnet groups that match any combination of the specified keys and values. For example, if you have owner and environment for tag keys, and admin and test for tag values, all subnet groups that have any combination of those values are returned.

If both tag keys and values are omitted from the request, subnet groups are returned regardless of whether they have tag keys or values associated with them.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/service/redshift"
)

func main() {
	svc := redshift.New(nil)

	params := &redshift.DescribeClusterSubnetGroupsInput{
		ClusterSubnetGroupName: aws.String("String"),
		Marker:                 aws.String("String"),
		MaxRecords:             aws.Long(1),
		TagKeys: []*string{
			aws.String("String"), // Required
			// More values...
		},
		TagValues: []*string{
			aws.String("String"), // Required
			// More values...
		},
	}
	resp, err := svc.DescribeClusterSubnetGroups(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS Error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.StringValue(resp))
}

Output:

func (*Redshift) DescribeClusterSubnetGroupsPages 

func (c *Redshift) DescribeClusterSubnetGroupsPages(input *DescribeClusterSubnetGroupsInput, fn func(p *DescribeClusterSubnetGroupsOutput, lastPage bool) (shouldContinue bool)) error

func (*Redshift) DescribeClusterSubnetGroupsRequest 

func (c *Redshift) DescribeClusterSubnetGroupsRequest(input *DescribeClusterSubnetGroupsInput) (req *aws.Request, output *DescribeClusterSubnetGroupsOutput)

DescribeClusterSubnetGroupsRequest generates a request for the DescribeClusterSubnetGroups operation.

func (*Redshift) DescribeClusterVersions 

func (c *Redshift) DescribeClusterVersions(input *DescribeClusterVersionsInput) (*DescribeClusterVersionsOutput, error)

Returns descriptions of the available Amazon Redshift cluster versions. You can call this operation even before creating any clusters to learn more about the Amazon Redshift versions. For more information about managing clusters, go to Amazon Redshift Clusters (http://docs.aws.amazon.com/redshift/latest/mgmt/working-with-clusters.html) in the Amazon Redshift Cluster Management Guide

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/service/redshift"
)

func main() {
	svc := redshift.New(nil)

	params := &redshift.DescribeClusterVersionsInput{
		ClusterParameterGroupFamily: aws.String("String"),
		ClusterVersion:              aws.String("String"),
		Marker:                      aws.String("String"),
		MaxRecords:                  aws.Long(1),
	}
	resp, err := svc.DescribeClusterVersions(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS Error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.StringValue(resp))
}

Output:

func (*Redshift) DescribeClusterVersionsPages 

func (c *Redshift) DescribeClusterVersionsPages(input *DescribeClusterVersionsInput, fn func(p *DescribeClusterVersionsOutput, lastPage bool) (shouldContinue bool)) error

func (*Redshift) DescribeClusterVersionsRequest 

func (c *Redshift) DescribeClusterVersionsRequest(input *DescribeClusterVersionsInput) (req *aws.Request, output *DescribeClusterVersionsOutput)

DescribeClusterVersionsRequest generates a request for the DescribeClusterVersions operation.

func (*Redshift) DescribeClusters 

func (c *Redshift) DescribeClusters(input *DescribeClustersInput) (*DescribeClustersOutput, error)

Returns properties of provisioned clusters including general cluster properties, cluster database properties, maintenance and backup properties, and security and access properties. This operation supports pagination. For more information about managing clusters, go to Amazon Redshift Clusters (http://docs.aws.amazon.com/redshift/latest/mgmt/working-with-clusters.html) in the Amazon Redshift Cluster Management Guide .

If you specify both tag keys and tag values in the same request, Amazon Redshift returns all clusters that match any combination of the specified keys and values. For example, if you have owner and environment for tag keys, and admin and test for tag values, all clusters that have any combination of those values are returned.

If both tag keys and values are omitted from the request, clusters are returned regardless of whether they have tag keys or values associated with them.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/service/redshift"
)

func main() {
	svc := redshift.New(nil)

	params := &redshift.DescribeClustersInput{
		ClusterIdentifier: aws.String("String"),
		Marker:            aws.String("String"),
		MaxRecords:        aws.Long(1),
		TagKeys: []*string{
			aws.String("String"), // Required
			// More values...
		},
		TagValues: []*string{
			aws.String("String"), // Required
			// More values...
		},
	}
	resp, err := svc.DescribeClusters(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS Error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.StringValue(resp))
}

Output:

func (*Redshift) DescribeClustersPages 

func (c *Redshift) DescribeClustersPages(input *DescribeClustersInput, fn func(p *DescribeClustersOutput, lastPage bool) (shouldContinue bool)) error

func (*Redshift) DescribeClustersRequest 

func (c *Redshift) DescribeClustersRequest(input *DescribeClustersInput) (req *aws.Request, output *DescribeClustersOutput)

DescribeClustersRequest generates a request for the DescribeClusters operation.

func (*Redshift) DescribeDefaultClusterParameters 

func (c *Redshift) DescribeDefaultClusterParameters(input *DescribeDefaultClusterParametersInput) (*DescribeDefaultClusterParametersOutput, error)

Returns a list of parameter settings for the specified parameter group family. 

For more information about managing parameter groups, go to Amazon Redshift

Parameter Groups (http://docs.aws.amazon.com/redshift/latest/mgmt/working-with-parameter-groups.html) in the Amazon Redshift Cluster Management Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/service/redshift"
)

func main() {
	svc := redshift.New(nil)

	params := &redshift.DescribeDefaultClusterParametersInput{
		ParameterGroupFamily: aws.String("String"), // Required
		Marker:               aws.String("String"),
		MaxRecords:           aws.Long(1),
	}
	resp, err := svc.DescribeDefaultClusterParameters(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS Error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.StringValue(resp))
}

Output:

func (*Redshift) DescribeDefaultClusterParametersPages 

func (c *Redshift) DescribeDefaultClusterParametersPages(input *DescribeDefaultClusterParametersInput, fn func(p *DescribeDefaultClusterParametersOutput, lastPage bool) (shouldContinue bool)) error

func (*Redshift) DescribeDefaultClusterParametersRequest 

func (c *Redshift) DescribeDefaultClusterParametersRequest(input *DescribeDefaultClusterParametersInput) (req *aws.Request, output *DescribeDefaultClusterParametersOutput)

DescribeDefaultClusterParametersRequest generates a request for the DescribeDefaultClusterParameters operation.

func (*Redshift) DescribeEventCategories 

func (c *Redshift) DescribeEventCategories(input *DescribeEventCategoriesInput) (*DescribeEventCategoriesOutput, error)

Displays a list of event categories for all event source types, or for a specified source type. For a list of the event categories and source types, go to Amazon Redshift Event Notifications (http://docs.aws.amazon.com/redshift/latest/mgmt/working-with-event-notifications.html).

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/service/redshift"
)

func main() {
	svc := redshift.New(nil)

	params := &redshift.DescribeEventCategoriesInput{
		SourceType: aws.String("String"),
	}
	resp, err := svc.DescribeEventCategories(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS Error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.StringValue(resp))
}

Output:

func (*Redshift) DescribeEventCategoriesRequest 

func (c *Redshift) DescribeEventCategoriesRequest(input *DescribeEventCategoriesInput) (req *aws.Request, output *DescribeEventCategoriesOutput)

DescribeEventCategoriesRequest generates a request for the DescribeEventCategories operation.

func (*Redshift) DescribeEventSubscriptions 

func (c *Redshift) DescribeEventSubscriptions(input *DescribeEventSubscriptionsInput) (*DescribeEventSubscriptionsOutput, error)

Lists descriptions of all the Amazon Redshift event notifications subscription for a customer account. If you specify a subscription name, lists the description for that subscription.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/service/redshift"
)

func main() {
	svc := redshift.New(nil)

	params := &redshift.DescribeEventSubscriptionsInput{
		Marker:           aws.String("String"),
		MaxRecords:       aws.Long(1),
		SubscriptionName: aws.String("String"),
	}
	resp, err := svc.DescribeEventSubscriptions(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS Error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.StringValue(resp))
}

Output:

func (*Redshift) DescribeEventSubscriptionsPages 

func (c *Redshift) DescribeEventSubscriptionsPages(input *DescribeEventSubscriptionsInput, fn func(p *DescribeEventSubscriptionsOutput, lastPage bool) (shouldContinue bool)) error

func (*Redshift) DescribeEventSubscriptionsRequest 

func (c *Redshift) DescribeEventSubscriptionsRequest(input *DescribeEventSubscriptionsInput) (req *aws.Request, output *DescribeEventSubscriptionsOutput)

DescribeEventSubscriptionsRequest generates a request for the DescribeEventSubscriptions operation.

func (*Redshift) DescribeEvents 

func (c *Redshift) DescribeEvents(input *DescribeEventsInput) (*DescribeEventsOutput, error)

Returns events related to clusters, security groups, snapshots, and parameter groups for the past 14 days. Events specific to a particular cluster, security group, snapshot or parameter group can be obtained by providing the name as a parameter. By default, the past hour of events are returned.

Example 
package main

import (
	"fmt"
	"time"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/service/redshift"
)

func main() {
	svc := redshift.New(nil)

	params := &redshift.DescribeEventsInput{
		Duration:         aws.Long(1),
		EndTime:          aws.Time(time.Now()),
		Marker:           aws.String("String"),
		MaxRecords:       aws.Long(1),
		SourceIdentifier: aws.String("String"),
		SourceType:       aws.String("SourceType"),
		StartTime:        aws.Time(time.Now()),
	}
	resp, err := svc.DescribeEvents(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS Error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.StringValue(resp))
}

Output:

func (*Redshift) DescribeEventsPages 

func (c *Redshift) DescribeEventsPages(input *DescribeEventsInput, fn func(p *DescribeEventsOutput, lastPage bool) (shouldContinue bool)) error

func (*Redshift) DescribeEventsRequest 

func (c *Redshift) DescribeEventsRequest(input *DescribeEventsInput) (req *aws.Request, output *DescribeEventsOutput)

DescribeEventsRequest generates a request for the DescribeEvents operation.

func (*Redshift) DescribeHSMClientCertificates 

func (c *Redshift) DescribeHSMClientCertificates(input *DescribeHSMClientCertificatesInput) (*DescribeHSMClientCertificatesOutput, error)

Returns information about the specified HSM client certificate. If no certificate ID is specified, returns information about all the HSM certificates owned by your AWS customer account.

If you specify both tag keys and tag values in the same request, Amazon Redshift returns all HSM client certificates that match any combination of the specified keys and values. For example, if you have owner and environment for tag keys, and admin and test for tag values, all HSM client certificates that have any combination of those values are returned.

If both tag keys and values are omitted from the request, HSM client certificates are returned regardless of whether they have tag keys or values associated with them.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/service/redshift"
)

func main() {
	svc := redshift.New(nil)

	params := &redshift.DescribeHSMClientCertificatesInput{
		HSMClientCertificateIdentifier: aws.String("String"),
		Marker:                         aws.String("String"),
		MaxRecords:                     aws.Long(1),
		TagKeys: []*string{
			aws.String("String"), // Required
			// More values...
		},
		TagValues: []*string{
			aws.String("String"), // Required
			// More values...
		},
	}
	resp, err := svc.DescribeHSMClientCertificates(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS Error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.StringValue(resp))
}

Output:

func (*Redshift) DescribeHSMClientCertificatesPages 

func (c *Redshift) DescribeHSMClientCertificatesPages(input *DescribeHSMClientCertificatesInput, fn func(p *DescribeHSMClientCertificatesOutput, lastPage bool) (shouldContinue bool)) error

func (*Redshift) DescribeHSMClientCertificatesRequest 

func (c *Redshift) DescribeHSMClientCertificatesRequest(input *DescribeHSMClientCertificatesInput) (req *aws.Request, output *DescribeHSMClientCertificatesOutput)

DescribeHSMClientCertificatesRequest generates a request for the DescribeHSMClientCertificates operation.

func (*Redshift) DescribeHSMConfigurations 

func (c *Redshift) DescribeHSMConfigurations(input *DescribeHSMConfigurationsInput) (*DescribeHSMConfigurationsOutput, error)

Returns information about the specified Amazon Redshift HSM configuration. If no configuration ID is specified, returns information about all the HSM configurations owned by your AWS customer account.

If you specify both tag keys and tag values in the same request, Amazon Redshift returns all HSM connections that match any combination of the specified keys and values. For example, if you have owner and environment for tag keys, and admin and test for tag values, all HSM connections that have any combination of those values are returned.

If both tag keys and values are omitted from the request, HSM connections are returned regardless of whether they have tag keys or values associated with them.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/service/redshift"
)

func main() {
	svc := redshift.New(nil)

	params := &redshift.DescribeHSMConfigurationsInput{
		HSMConfigurationIdentifier: aws.String("String"),
		Marker:                     aws.String("String"),
		MaxRecords:                 aws.Long(1),
		TagKeys: []*string{
			aws.String("String"), // Required
			// More values...
		},
		TagValues: []*string{
			aws.String("String"), // Required
			// More values...
		},
	}
	resp, err := svc.DescribeHSMConfigurations(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS Error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.StringValue(resp))
}

Output:

func (*Redshift) DescribeHSMConfigurationsPages 

func (c *Redshift) DescribeHSMConfigurationsPages(input *DescribeHSMConfigurationsInput, fn func(p *DescribeHSMConfigurationsOutput, lastPage bool) (shouldContinue bool)) error

func (*Redshift) DescribeHSMConfigurationsRequest 

func (c *Redshift) DescribeHSMConfigurationsRequest(input *DescribeHSMConfigurationsInput) (req *aws.Request, output *DescribeHSMConfigurationsOutput)

DescribeHSMConfigurationsRequest generates a request for the DescribeHSMConfigurations operation.

func (*Redshift) DescribeLoggingStatus 

func (c *Redshift) DescribeLoggingStatus(input *DescribeLoggingStatusInput) (*LoggingStatus, error)

Describes whether information, such as queries and connection attempts, is being logged for the specified Amazon Redshift cluster.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/service/redshift"
)

func main() {
	svc := redshift.New(nil)

	params := &redshift.DescribeLoggingStatusInput{
		ClusterIdentifier: aws.String("String"), // Required
	}
	resp, err := svc.DescribeLoggingStatus(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS Error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.StringValue(resp))
}

Output:

func (*Redshift) DescribeLoggingStatusRequest 

func (c *Redshift) DescribeLoggingStatusRequest(input *DescribeLoggingStatusInput) (req *aws.Request, output *LoggingStatus)

DescribeLoggingStatusRequest generates a request for the DescribeLoggingStatus operation.

func (*Redshift) DescribeOrderableClusterOptions 

func (c *Redshift) DescribeOrderableClusterOptions(input *DescribeOrderableClusterOptionsInput) (*DescribeOrderableClusterOptionsOutput, error)

Returns a list of orderable cluster options. Before you create a new cluster you can use this operation to find what options are available, such as the EC2 Availability Zones (AZ) in the specific AWS region that you can specify, and the node types you can request. The node types differ by available storage, memory, CPU and price. With the cost involved you might want to obtain a list of cluster options in the specific region and specify values when creating a cluster. For more information about managing clusters, go to Amazon Redshift Clusters (http://docs.aws.amazon.com/redshift/latest/mgmt/working-with-clusters.html) in the Amazon Redshift Cluster Management Guide

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/service/redshift"
)

func main() {
	svc := redshift.New(nil)

	params := &redshift.DescribeOrderableClusterOptionsInput{
		ClusterVersion: aws.String("String"),
		Marker:         aws.String("String"),
		MaxRecords:     aws.Long(1),
		NodeType:       aws.String("String"),
	}
	resp, err := svc.DescribeOrderableClusterOptions(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS Error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.StringValue(resp))
}

Output:

func (*Redshift) DescribeOrderableClusterOptionsPages 

func (c *Redshift) DescribeOrderableClusterOptionsPages(input *DescribeOrderableClusterOptionsInput, fn func(p *DescribeOrderableClusterOptionsOutput, lastPage bool) (shouldContinue bool)) error

func (*Redshift) DescribeOrderableClusterOptionsRequest 

func (c *Redshift) DescribeOrderableClusterOptionsRequest(input *DescribeOrderableClusterOptionsInput) (req *aws.Request, output *DescribeOrderableClusterOptionsOutput)

DescribeOrderableClusterOptionsRequest generates a request for the DescribeOrderableClusterOptions operation.

func (*Redshift) DescribeReservedNodeOfferings 

func (c *Redshift) DescribeReservedNodeOfferings(input *DescribeReservedNodeOfferingsInput) (*DescribeReservedNodeOfferingsOutput, error)

Returns a list of the available reserved node offerings by Amazon Redshift with their descriptions including the node type, the fixed and recurring costs of reserving the node and duration the node will be reserved for you. These descriptions help you determine which reserve node offering you want to purchase. You then use the unique offering ID in you call to PurchaseReservedNodeOffering to reserve one or more nodes for your Amazon Redshift cluster. 

For more information about managing parameter groups, go to Purchasing

Reserved Nodes (http://docs.aws.amazon.com/redshift/latest/mgmt/purchase-reserved-node-instance.html) in the Amazon Redshift Cluster Management Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/service/redshift"
)

func main() {
	svc := redshift.New(nil)

	params := &redshift.DescribeReservedNodeOfferingsInput{
		Marker:                 aws.String("String"),
		MaxRecords:             aws.Long(1),
		ReservedNodeOfferingID: aws.String("String"),
	}
	resp, err := svc.DescribeReservedNodeOfferings(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS Error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.StringValue(resp))
}

Output:

func (*Redshift) DescribeReservedNodeOfferingsPages 

func (c *Redshift) DescribeReservedNodeOfferingsPages(input *DescribeReservedNodeOfferingsInput, fn func(p *DescribeReservedNodeOfferingsOutput, lastPage bool) (shouldContinue bool)) error

func (*Redshift) DescribeReservedNodeOfferingsRequest 

func (c *Redshift) DescribeReservedNodeOfferingsRequest(input *DescribeReservedNodeOfferingsInput) (req *aws.Request, output *DescribeReservedNodeOfferingsOutput)

DescribeReservedNodeOfferingsRequest generates a request for the DescribeReservedNodeOfferings operation.

func (*Redshift) DescribeReservedNodes 

func (c *Redshift) DescribeReservedNodes(input *DescribeReservedNodesInput) (*DescribeReservedNodesOutput, error)

Returns the descriptions of the reserved nodes.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/service/redshift"
)

func main() {
	svc := redshift.New(nil)

	params := &redshift.DescribeReservedNodesInput{
		Marker:         aws.String("String"),
		MaxRecords:     aws.Long(1),
		ReservedNodeID: aws.String("String"),
	}
	resp, err := svc.DescribeReservedNodes(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS Error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.StringValue(resp))
}

Output:

func (*Redshift) DescribeReservedNodesPages 

func (c *Redshift) DescribeReservedNodesPages(input *DescribeReservedNodesInput, fn func(p *DescribeReservedNodesOutput, lastPage bool) (shouldContinue bool)) error

func (*Redshift) DescribeReservedNodesRequest 

func (c *Redshift) DescribeReservedNodesRequest(input *DescribeReservedNodesInput) (req *aws.Request, output *DescribeReservedNodesOutput)

DescribeReservedNodesRequest generates a request for the DescribeReservedNodes operation.

func (*Redshift) DescribeResize 

func (c *Redshift) DescribeResize(input *DescribeResizeInput) (*DescribeResizeOutput, error)

Returns information about the last resize operation for the specified cluster. If no resize operation has ever been initiated for the specified cluster, a HTTP 404 error is returned. If a resize operation was initiated and completed, the status of the resize remains as SUCCEEDED until the next resize. 

A resize operation can be requested using ModifyCluster and specifying

a different number or type of nodes for the cluster.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/service/redshift"
)

func main() {
	svc := redshift.New(nil)

	params := &redshift.DescribeResizeInput{
		ClusterIdentifier: aws.String("String"), // Required
	}
	resp, err := svc.DescribeResize(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS Error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.StringValue(resp))
}

Output:

func (*Redshift) DescribeResizeRequest 

func (c *Redshift) DescribeResizeRequest(input *DescribeResizeInput) (req *aws.Request, output *DescribeResizeOutput)

DescribeResizeRequest generates a request for the DescribeResize operation.

func (*Redshift) DescribeTags 

func (c *Redshift) DescribeTags(input *DescribeTagsInput) (*DescribeTagsOutput, error)

Returns a list of tags. You can return tags from a specific resource by specifying an ARN, or you can return all tags for a given type of resource, such as clusters, snapshots, and so on. 

The following are limitations for DescribeTags:  You cannot specify an

ARN and a resource-type value together in the same request. You cannot use the MaxRecords and Marker parameters together with the ARN parameter. The MaxRecords parameter can be a range from 10 to 50 results to return in a request.

If you specify both tag keys and tag values in the same request, Amazon Redshift returns all resources that match any combination of the specified keys and values. For example, if you have owner and environment for tag keys, and admin and test for tag values, all resources that have any combination of those values are returned.

If both tag keys and values are omitted from the request, resources are returned regardless of whether they have tag keys or values associated with them.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/service/redshift"
)

func main() {
	svc := redshift.New(nil)

	params := &redshift.DescribeTagsInput{
		Marker:       aws.String("String"),
		MaxRecords:   aws.Long(1),
		ResourceName: aws.String("String"),
		ResourceType: aws.String("String"),
		TagKeys: []*string{
			aws.String("String"), // Required
			// More values...
		},
		TagValues: []*string{
			aws.String("String"), // Required
			// More values...
		},
	}
	resp, err := svc.DescribeTags(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS Error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.StringValue(resp))
}

Output:

func (*Redshift) DescribeTagsRequest 

func (c *Redshift) DescribeTagsRequest(input *DescribeTagsInput) (req *aws.Request, output *DescribeTagsOutput)

DescribeTagsRequest generates a request for the DescribeTags operation.

func (*Redshift) DisableLogging 

func (c *Redshift) DisableLogging(input *DisableLoggingInput) (*LoggingStatus, error)

Stops logging information, such as queries and connection attempts, for the specified Amazon Redshift cluster.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/service/redshift"
)

func main() {
	svc := redshift.New(nil)

	params := &redshift.DisableLoggingInput{
		ClusterIdentifier: aws.String("String"), // Required
	}
	resp, err := svc.DisableLogging(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS Error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.StringValue(resp))
}

Output:

func (*Redshift) DisableLoggingRequest 

func (c *Redshift) DisableLoggingRequest(input *DisableLoggingInput) (req *aws.Request, output *LoggingStatus)

DisableLoggingRequest generates a request for the DisableLogging operation.

func (*Redshift) DisableSnapshotCopy 

func (c *Redshift) DisableSnapshotCopy(input *DisableSnapshotCopyInput) (*DisableSnapshotCopyOutput, error)

Disables the automatic copying of snapshots from one region to another region for a specified cluster.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/service/redshift"
)

func main() {
	svc := redshift.New(nil)

	params := &redshift.DisableSnapshotCopyInput{
		ClusterIdentifier: aws.String("String"), // Required
	}
	resp, err := svc.DisableSnapshotCopy(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS Error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.StringValue(resp))
}

Output:

func (*Redshift) DisableSnapshotCopyRequest 

func (c *Redshift) DisableSnapshotCopyRequest(input *DisableSnapshotCopyInput) (req *aws.Request, output *DisableSnapshotCopyOutput)

DisableSnapshotCopyRequest generates a request for the DisableSnapshotCopy operation.

func (*Redshift) EnableLogging 

func (c *Redshift) EnableLogging(input *EnableLoggingInput) (*LoggingStatus, error)

Starts logging information, such as queries and connection attempts, for the specified Amazon Redshift cluster.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/service/redshift"
)

func main() {
	svc := redshift.New(nil)

	params := &redshift.EnableLoggingInput{
		BucketName:        aws.String("String"), // Required
		ClusterIdentifier: aws.String("String"), // Required
		S3KeyPrefix:       aws.String("String"),
	}
	resp, err := svc.EnableLogging(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS Error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.StringValue(resp))
}

Output:

func (*Redshift) EnableLoggingRequest 

func (c *Redshift) EnableLoggingRequest(input *EnableLoggingInput) (req *aws.Request, output *LoggingStatus)

EnableLoggingRequest generates a request for the EnableLogging operation.

func (*Redshift) EnableSnapshotCopy 

func (c *Redshift) EnableSnapshotCopy(input *EnableSnapshotCopyInput) (*EnableSnapshotCopyOutput, error)

Enables the automatic copy of snapshots from one region to another region for a specified cluster.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/service/redshift"
)

func main() {
	svc := redshift.New(nil)

	params := &redshift.EnableSnapshotCopyInput{
		ClusterIdentifier: aws.String("String"), // Required
		DestinationRegion: aws.String("String"), // Required
		RetentionPeriod:   aws.Long(1),
	}
	resp, err := svc.EnableSnapshotCopy(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS Error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.StringValue(resp))
}

Output:

func (*Redshift) EnableSnapshotCopyRequest 

func (c *Redshift) EnableSnapshotCopyRequest(input *EnableSnapshotCopyInput) (req *aws.Request, output *EnableSnapshotCopyOutput)

EnableSnapshotCopyRequest generates a request for the EnableSnapshotCopy operation.

func (*Redshift) ModifyCluster 

func (c *Redshift) ModifyCluster(input *ModifyClusterInput) (*ModifyClusterOutput, error)

Modifies the settings for a cluster. For example, you can add another security or parameter group, update the preferred maintenance window, or change the master user password. Resetting a cluster password or modifying the security groups associated with a cluster do not need a reboot. However, modifying a parameter group requires a reboot for parameters to take effect. For more information about managing clusters, go to Amazon Redshift Clusters (http://docs.aws.amazon.com/redshift/latest/mgmt/working-with-clusters.html) in the Amazon Redshift Cluster Management Guide .

You can also change node type and the number of nodes to scale up or down the cluster. When resizing a cluster, you must specify both the number of nodes and the node type even if one of the parameters does not change.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/service/redshift"
)

func main() {
	svc := redshift.New(nil)

	params := &redshift.ModifyClusterInput{
		ClusterIdentifier:                aws.String("String"), // Required
		AllowVersionUpgrade:              aws.Boolean(true),
		AutomatedSnapshotRetentionPeriod: aws.Long(1),
		ClusterParameterGroupName:        aws.String("String"),
		ClusterSecurityGroups: []*string{
			aws.String("String"), // Required
			// More values...
		},
		ClusterType:                    aws.String("String"),
		ClusterVersion:                 aws.String("String"),
		HSMClientCertificateIdentifier: aws.String("String"),
		HSMConfigurationIdentifier:     aws.String("String"),
		MasterUserPassword:             aws.String("String"),
		NewClusterIdentifier:           aws.String("String"),
		NodeType:                       aws.String("String"),
		NumberOfNodes:                  aws.Long(1),
		PreferredMaintenanceWindow:     aws.String("String"),
		VPCSecurityGroupIDs: []*string{
			aws.String("String"), // Required
			// More values...
		},
	}
	resp, err := svc.ModifyCluster(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS Error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.StringValue(resp))
}

Output:

func (*Redshift) ModifyClusterParameterGroup 

func (c *Redshift) ModifyClusterParameterGroup(input *ModifyClusterParameterGroupInput) (*ClusterParameterGroupNameMessage, error)

Modifies the parameters of a parameter group. 

For more information about managing parameter groups, go to Amazon Redshift

Parameter Groups (http://docs.aws.amazon.com/redshift/latest/mgmt/working-with-parameter-groups.html) in the Amazon Redshift Cluster Management Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/service/redshift"
)

func main() {
	svc := redshift.New(nil)

	params := &redshift.ModifyClusterParameterGroupInput{
		ParameterGroupName: aws.String("String"), // Required
		Parameters: []*redshift.Parameter{ // Required
			{ // Required
				AllowedValues:        aws.String("String"),
				DataType:             aws.String("String"),
				Description:          aws.String("String"),
				IsModifiable:         aws.Boolean(true),
				MinimumEngineVersion: aws.String("String"),
				ParameterName:        aws.String("String"),
				ParameterValue:       aws.String("String"),
				Source:               aws.String("String"),
			},
			// More values...
		},
	}
	resp, err := svc.ModifyClusterParameterGroup(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS Error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.StringValue(resp))
}

Output:

func (*Redshift) ModifyClusterParameterGroupRequest 

func (c *Redshift) ModifyClusterParameterGroupRequest(input *ModifyClusterParameterGroupInput) (req *aws.Request, output *ClusterParameterGroupNameMessage)

ModifyClusterParameterGroupRequest generates a request for the ModifyClusterParameterGroup operation.

func (*Redshift) ModifyClusterRequest 

func (c *Redshift) ModifyClusterRequest(input *ModifyClusterInput) (req *aws.Request, output *ModifyClusterOutput)

ModifyClusterRequest generates a request for the ModifyCluster operation.

func (*Redshift) ModifyClusterSubnetGroup 

func (c *Redshift) ModifyClusterSubnetGroup(input *ModifyClusterSubnetGroupInput) (*ModifyClusterSubnetGroupOutput, error)

Modifies a cluster subnet group to include the specified list of VPC subnets. The operation replaces the existing list of subnets with the new list of subnets.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/service/redshift"
)

func main() {
	svc := redshift.New(nil)

	params := &redshift.ModifyClusterSubnetGroupInput{
		ClusterSubnetGroupName: aws.String("String"), // Required
		SubnetIDs: []*string{ // Required
			aws.String("String"), // Required
			// More values...
		},
		Description: aws.String("String"),
	}
	resp, err := svc.ModifyClusterSubnetGroup(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS Error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.StringValue(resp))
}

Output:

func (*Redshift) ModifyClusterSubnetGroupRequest 

func (c *Redshift) ModifyClusterSubnetGroupRequest(input *ModifyClusterSubnetGroupInput) (req *aws.Request, output *ModifyClusterSubnetGroupOutput)

ModifyClusterSubnetGroupRequest generates a request for the ModifyClusterSubnetGroup operation.

func (*Redshift) ModifyEventSubscription 

func (c *Redshift) ModifyEventSubscription(input *ModifyEventSubscriptionInput) (*ModifyEventSubscriptionOutput, error)

Modifies an existing Amazon Redshift event notification subscription.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/service/redshift"
)

func main() {
	svc := redshift.New(nil)

	params := &redshift.ModifyEventSubscriptionInput{
		SubscriptionName: aws.String("String"), // Required
		Enabled:          aws.Boolean(true),
		EventCategories: []*string{
			aws.String("String"), // Required
			// More values...
		},
		SNSTopicARN: aws.String("String"),
		Severity:    aws.String("String"),
		SourceIDs: []*string{
			aws.String("String"), // Required
			// More values...
		},
		SourceType: aws.String("String"),
	}
	resp, err := svc.ModifyEventSubscription(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS Error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.StringValue(resp))
}

Output:

func (*Redshift) ModifyEventSubscriptionRequest 

func (c *Redshift) ModifyEventSubscriptionRequest(input *ModifyEventSubscriptionInput) (req *aws.Request, output *ModifyEventSubscriptionOutput)

ModifyEventSubscriptionRequest generates a request for the ModifyEventSubscription operation.

func (*Redshift) ModifySnapshotCopyRetentionPeriod 

func (c *Redshift) ModifySnapshotCopyRetentionPeriod(input *ModifySnapshotCopyRetentionPeriodInput) (*ModifySnapshotCopyRetentionPeriodOutput, error)

Modifies the number of days to retain automated snapshots in the destination region after they are copied from the source region.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/service/redshift"
)

func main() {
	svc := redshift.New(nil)

	params := &redshift.ModifySnapshotCopyRetentionPeriodInput{
		ClusterIdentifier: aws.String("String"), // Required
		RetentionPeriod:   aws.Long(1),          // Required
	}
	resp, err := svc.ModifySnapshotCopyRetentionPeriod(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS Error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.StringValue(resp))
}

Output:

func (*Redshift) ModifySnapshotCopyRetentionPeriodRequest 

func (c *Redshift) ModifySnapshotCopyRetentionPeriodRequest(input *ModifySnapshotCopyRetentionPeriodInput) (req *aws.Request, output *ModifySnapshotCopyRetentionPeriodOutput)

ModifySnapshotCopyRetentionPeriodRequest generates a request for the ModifySnapshotCopyRetentionPeriod operation.

func (*Redshift) PurchaseReservedNodeOffering 

func (c *Redshift) PurchaseReservedNodeOffering(input *PurchaseReservedNodeOfferingInput) (*PurchaseReservedNodeOfferingOutput, error)

Allows you to purchase reserved nodes. Amazon Redshift offers a predefined set of reserved node offerings. You can purchase one of the offerings. You can call the DescribeReservedNodeOfferings API to obtain the available reserved node offerings. You can call this API by providing a specific reserved node offering and the number of nodes you want to reserve. 

For more information about managing parameter groups, go to Purchasing

Reserved Nodes (http://docs.aws.amazon.com/redshift/latest/mgmt/purchase-reserved-node-instance.html) in the Amazon Redshift Cluster Management Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/service/redshift"
)

func main() {
	svc := redshift.New(nil)

	params := &redshift.PurchaseReservedNodeOfferingInput{
		ReservedNodeOfferingID: aws.String("String"), // Required
		NodeCount:              aws.Long(1),
	}
	resp, err := svc.PurchaseReservedNodeOffering(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS Error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.StringValue(resp))
}

Output:

func (*Redshift) PurchaseReservedNodeOfferingRequest 

func (c *Redshift) PurchaseReservedNodeOfferingRequest(input *PurchaseReservedNodeOfferingInput) (req *aws.Request, output *PurchaseReservedNodeOfferingOutput)

PurchaseReservedNodeOfferingRequest generates a request for the PurchaseReservedNodeOffering operation.

func (*Redshift) RebootCluster 

func (c *Redshift) RebootCluster(input *RebootClusterInput) (*RebootClusterOutput, error)

Reboots a cluster. This action is taken as soon as possible. It results in a momentary outage to the cluster, during which the cluster status is set to rebooting. A cluster event is created when the reboot is completed. Any pending cluster modifications (see ModifyCluster) are applied at this reboot. For more information about managing clusters, go to Amazon Redshift Clusters (http://docs.aws.amazon.com/redshift/latest/mgmt/working-with-clusters.html) in the Amazon Redshift Cluster Management Guide

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/service/redshift"
)

func main() {
	svc := redshift.New(nil)

	params := &redshift.RebootClusterInput{
		ClusterIdentifier: aws.String("String"), // Required
	}
	resp, err := svc.RebootCluster(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS Error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.StringValue(resp))
}

Output:

func (*Redshift) RebootClusterRequest 

func (c *Redshift) RebootClusterRequest(input *RebootClusterInput) (req *aws.Request, output *RebootClusterOutput)

RebootClusterRequest generates a request for the RebootCluster operation.

func (*Redshift) ResetClusterParameterGroup 

func (c *Redshift) ResetClusterParameterGroup(input *ResetClusterParameterGroupInput) (*ClusterParameterGroupNameMessage, error)

Sets one or more parameters of the specified parameter group to their default values and sets the source values of the parameters to "engine-default". To reset the entire parameter group specify the ResetAllParameters parameter. For parameter changes to take effect you must reboot any associated clusters.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/service/redshift"
)

func main() {
	svc := redshift.New(nil)

	params := &redshift.ResetClusterParameterGroupInput{
		ParameterGroupName: aws.String("String"), // Required
		Parameters: []*redshift.Parameter{
			{ // Required
				AllowedValues:        aws.String("String"),
				DataType:             aws.String("String"),
				Description:          aws.String("String"),
				IsModifiable:         aws.Boolean(true),
				MinimumEngineVersion: aws.String("String"),
				ParameterName:        aws.String("String"),
				ParameterValue:       aws.String("String"),
				Source:               aws.String("String"),
			},
			// More values...
		},
		ResetAllParameters: aws.Boolean(true),
	}
	resp, err := svc.ResetClusterParameterGroup(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS Error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.StringValue(resp))
}

Output:

func (*Redshift) ResetClusterParameterGroupRequest 

func (c *Redshift) ResetClusterParameterGroupRequest(input *ResetClusterParameterGroupInput) (req *aws.Request, output *ClusterParameterGroupNameMessage)

ResetClusterParameterGroupRequest generates a request for the ResetClusterParameterGroup operation.

func (*Redshift) RestoreFromClusterSnapshot 

func (c *Redshift) RestoreFromClusterSnapshot(input *RestoreFromClusterSnapshotInput) (*RestoreFromClusterSnapshotOutput, error)

Creates a new cluster from a snapshot. Amazon Redshift creates the resulting cluster with the same configuration as the original cluster from which the snapshot was created, except that the new cluster is created with the default cluster security and parameter group. After Amazon Redshift creates the cluster you can use the ModifyCluster API to associate a different security group and different parameter group with the restored cluster. 

If you restore a cluster into a VPC, you must provide a cluster subnet

group where you want the cluster restored. 

For more information about working with snapshots, go to Amazon Redshift

Snapshots (http://docs.aws.amazon.com/redshift/latest/mgmt/working-with-snapshots.html) in the Amazon Redshift Cluster Management Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/service/redshift"
)

func main() {
	svc := redshift.New(nil)

	params := &redshift.RestoreFromClusterSnapshotInput{
		ClusterIdentifier:                aws.String("String"), // Required
		SnapshotIdentifier:               aws.String("String"), // Required
		AllowVersionUpgrade:              aws.Boolean(true),
		AutomatedSnapshotRetentionPeriod: aws.Long(1),
		AvailabilityZone:                 aws.String("String"),
		ClusterParameterGroupName:        aws.String("String"),
		ClusterSecurityGroups: []*string{
			aws.String("String"), // Required
			// More values...
		},
		ClusterSubnetGroupName:         aws.String("String"),
		ElasticIP:                      aws.String("String"),
		HSMClientCertificateIdentifier: aws.String("String"),
		HSMConfigurationIdentifier:     aws.String("String"),
		KMSKeyID:                       aws.String("String"),
		OwnerAccount:                   aws.String("String"),
		Port:                           aws.Long(1),
		PreferredMaintenanceWindow:     aws.String("String"),
		PubliclyAccessible:             aws.Boolean(true),
		SnapshotClusterIdentifier:      aws.String("String"),
		VPCSecurityGroupIDs: []*string{
			aws.String("String"), // Required
			// More values...
		},
	}
	resp, err := svc.RestoreFromClusterSnapshot(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS Error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.StringValue(resp))
}

Output:

func (*Redshift) RestoreFromClusterSnapshotRequest 

func (c *Redshift) RestoreFromClusterSnapshotRequest(input *RestoreFromClusterSnapshotInput) (req *aws.Request, output *RestoreFromClusterSnapshotOutput)

RestoreFromClusterSnapshotRequest generates a request for the RestoreFromClusterSnapshot operation.

func (*Redshift) RevokeClusterSecurityGroupIngress 

func (c *Redshift) RevokeClusterSecurityGroupIngress(input *RevokeClusterSecurityGroupIngressInput) (*RevokeClusterSecurityGroupIngressOutput, error)

Revokes an ingress rule in an Amazon Redshift security group for a previously authorized IP range or Amazon EC2 security group. To add an ingress rule, see AuthorizeClusterSecurityGroupIngress. For information about managing security groups, go to Amazon Redshift Cluster Security Groups (http://docs.aws.amazon.com/redshift/latest/mgmt/working-with-security-groups.html) in the Amazon Redshift Cluster Management Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/service/redshift"
)

func main() {
	svc := redshift.New(nil)

	params := &redshift.RevokeClusterSecurityGroupIngressInput{
		ClusterSecurityGroupName: aws.String("String"), // Required
		CIDRIP:                   aws.String("String"),
		EC2SecurityGroupName:     aws.String("String"),
		EC2SecurityGroupOwnerID:  aws.String("String"),
	}
	resp, err := svc.RevokeClusterSecurityGroupIngress(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS Error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.StringValue(resp))
}

Output:

func (*Redshift) RevokeClusterSecurityGroupIngressRequest 

func (c *Redshift) RevokeClusterSecurityGroupIngressRequest(input *RevokeClusterSecurityGroupIngressInput) (req *aws.Request, output *RevokeClusterSecurityGroupIngressOutput)

RevokeClusterSecurityGroupIngressRequest generates a request for the RevokeClusterSecurityGroupIngress operation.

func (*Redshift) RevokeSnapshotAccess 

func (c *Redshift) RevokeSnapshotAccess(input *RevokeSnapshotAccessInput) (*RevokeSnapshotAccessOutput, error)

Removes the ability of the specified AWS customer account to restore the specified snapshot. If the account is currently restoring the snapshot, the restore will run to completion. 

For more information about working with snapshots, go to Amazon Redshift

Snapshots (http://docs.aws.amazon.com/redshift/latest/mgmt/working-with-snapshots.html) in the Amazon Redshift Cluster Management Guide.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/service/redshift"
)

func main() {
	svc := redshift.New(nil)

	params := &redshift.RevokeSnapshotAccessInput{
		AccountWithRestoreAccess:  aws.String("String"), // Required
		SnapshotIdentifier:        aws.String("String"), // Required
		SnapshotClusterIdentifier: aws.String("String"),
	}
	resp, err := svc.RevokeSnapshotAccess(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS Error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.StringValue(resp))
}

Output:

func (*Redshift) RevokeSnapshotAccessRequest 

func (c *Redshift) RevokeSnapshotAccessRequest(input *RevokeSnapshotAccessInput) (req *aws.Request, output *RevokeSnapshotAccessOutput)

RevokeSnapshotAccessRequest generates a request for the RevokeSnapshotAccess operation.

func (*Redshift) RotateEncryptionKey 

func (c *Redshift) RotateEncryptionKey(input *RotateEncryptionKeyInput) (*RotateEncryptionKeyOutput, error)

Rotates the encryption keys for a cluster.

Example 
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/awsutil"
	"github.com/aws/aws-sdk-go/service/redshift"
)

func main() {
	svc := redshift.New(nil)

	params := &redshift.RotateEncryptionKeyInput{
		ClusterIdentifier: aws.String("String"), // Required
	}
	resp, err := svc.RotateEncryptionKey(params)

	if err != nil {
		if awsErr, ok := err.(awserr.Error); ok {
			// Generic AWS Error with Code, Message, and original error (if any)
			fmt.Println(awsErr.Code(), awsErr.Message(), awsErr.OrigErr())
			if reqErr, ok := err.(awserr.RequestFailure); ok {
				// A service error occurred
				fmt.Println(reqErr.Code(), reqErr.Message(), reqErr.StatusCode(), reqErr.RequestID())
			}
		} else {
			// This case should never be hit, the SDK should always return an
			// error which satisfies the awserr.Error interface.
			fmt.Println(err.Error())
		}
	}

	// Pretty-print the response data.
	fmt.Println(awsutil.StringValue(resp))
}

Output:

func (*Redshift) RotateEncryptionKeyRequest 

func (c *Redshift) RotateEncryptionKeyRequest(input *RotateEncryptionKeyInput) (req *aws.Request, output *RotateEncryptionKeyOutput)

RotateEncryptionKeyRequest generates a request for the RotateEncryptionKey operation.

type ReservedNode 

type ReservedNode struct {
	// The currency code for the reserved cluster.
	CurrencyCode *string `type:"string"`

	// The duration of the node reservation in seconds.
	Duration *int64 `type:"integer"`

	// The fixed cost Amazon Redshift charged you for this reserved node.
	FixedPrice *float64 `type:"double"`

	// The number of reserved compute nodes.
	NodeCount *int64 `type:"integer"`

	// The node type of the reserved node.
	NodeType *string `type:"string"`

	// The anticipated utilization of the reserved node, as defined in the reserved
	// node offering.
	OfferingType *string `type:"string"`

	// The recurring charges for the reserved node.
	RecurringCharges []*RecurringCharge `locationNameList:"RecurringCharge" type:"list"`

	// The unique identifier for the reservation.
	ReservedNodeID *string `locationName:"ReservedNodeId" type:"string"`

	// The identifier for the reserved node offering.
	ReservedNodeOfferingID *string `locationName:"ReservedNodeOfferingId" type:"string"`

	// The time the reservation started. You purchase a reserved node offering for
	// a duration. This is the start time of that duration.
	StartTime *time.Time `type:"timestamp" timestampFormat:"iso8601"`

	// The state of the reserved compute node.
	//
	// Possible Values:
	//
	//  pending-payment-This reserved node has recently been purchased, and the
	// sale has been approved, but payment has not yet been confirmed. active-This
	// reserved node is owned by the caller and is available for use. payment-failed-Payment
	// failed for the purchase attempt.
	State *string `type:"string"`

	// The hourly rate Amazon Redshift charge you for this reserved node.
	UsagePrice *float64 `type:"double"`
	// contains filtered or unexported fields
}

Describes a reserved node.

type ReservedNodeOffering 

type ReservedNodeOffering struct {
	// The currency code for the compute nodes offering.
	CurrencyCode *string `type:"string"`

	// The duration, in seconds, for which the offering will reserve the node.
	Duration *int64 `type:"integer"`

	// The upfront fixed charge you will pay to purchase the specific reserved node
	// offering.
	FixedPrice *float64 `type:"double"`

	// The node type offered by the reserved node offering.
	NodeType *string `type:"string"`

	// The anticipated utilization of the reserved node, as defined in the reserved
	// node offering.
	OfferingType *string `type:"string"`

	// The charge to your account regardless of whether you are creating any clusters
	// using the node offering. Recurring charges are only in effect for heavy-utilization
	// reserved nodes.
	RecurringCharges []*RecurringCharge `locationNameList:"RecurringCharge" type:"list"`

	// The offering identifier.
	ReservedNodeOfferingID *string `locationName:"ReservedNodeOfferingId" type:"string"`

	// The rate you are charged for each hour the cluster that is using the offering
	// is running.
	UsagePrice *float64 `type:"double"`
	// contains filtered or unexported fields
}

Describes a reserved node offering.

type ResetClusterParameterGroupInput 

type ResetClusterParameterGroupInput struct {
	// The name of the cluster parameter group to be reset.
	ParameterGroupName *string `type:"string" required:"true"`

	// An array of names of parameters to be reset. If ResetAllParameters option
	// is not used, then at least one parameter name must be supplied.
	//
	// Constraints: A maximum of 20 parameters can be reset in a single request.
	Parameters []*Parameter `locationNameList:"Parameter" type:"list"`

	// If true, all parameters in the specified parameter group will be reset to
	// their default values.
	//
	// Default: true
	ResetAllParameters *bool `type:"boolean"`
	// contains filtered or unexported fields
}

type RestoreFromClusterSnapshotInput 

type RestoreFromClusterSnapshotInput struct {
	// If true, major version upgrades can be applied during the maintenance window
	// to the Amazon Redshift engine that is running on the cluster.
	//
	// Default: true
	AllowVersionUpgrade *bool `type:"boolean"`

	// The number of days that automated snapshots are retained. If the value is
	// 0, automated snapshots are disabled. Even if automated snapshots are disabled,
	// you can still create manual snapshots when you want with CreateClusterSnapshot.
	//
	//  Default: The value selected for the cluster from which the snapshot was
	// taken.
	//
	// Constraints: Must be a value from 0 to 35.
	AutomatedSnapshotRetentionPeriod *int64 `type:"integer"`

	// The Amazon EC2 Availability Zone in which to restore the cluster.
	//
	// Default: A random, system-chosen Availability Zone.
	//
	// Example: us-east-1a
	AvailabilityZone *string `type:"string"`

	// The identifier of the cluster that will be created from restoring the snapshot.
	//
	//  Constraints:
	//
	//  Must contain from 1 to 63 alphanumeric characters or hyphens. Alphabetic
	// characters must be lowercase. First character must be a letter. Cannot end
	// with a hyphen or contain two consecutive hyphens. Must be unique for all
	// clusters within an AWS account.
	ClusterIdentifier *string `type:"string" required:"true"`

	// The name of the parameter group to be associated with this cluster.
	//
	// Default: The default Amazon Redshift cluster parameter group. For information
	// about the default parameter group, go to Working with Amazon Redshift Parameter
	// Groups (http://docs.aws.amazon.com/redshift/latest/mgmt/working-with-parameter-groups.html).
	//
	//  Constraints:
	//
	//  Must be 1 to 255 alphanumeric characters or hyphens. First character must
	// be a letter. Cannot end with a hyphen or contain two consecutive hyphens.
	ClusterParameterGroupName *string `type:"string"`

	// A list of security groups to be associated with this cluster.
	//
	//  Default: The default cluster security group for Amazon Redshift.
	//
	// Cluster security groups only apply to clusters outside of VPCs.
	ClusterSecurityGroups []*string `locationNameList:"ClusterSecurityGroupName" type:"list"`

	// The name of the subnet group where you want to cluster restored.
	//
	//  A snapshot of cluster in VPC can be restored only in VPC. Therefore, you
	// must provide subnet group name where you want the cluster restored.
	ClusterSubnetGroupName *string `type:"string"`

	// The elastic IP (EIP) address for the cluster.
	ElasticIP *string `locationName:"ElasticIp" type:"string"`

	// Specifies the name of the HSM client certificate the Amazon Redshift cluster
	// uses to retrieve the data encryption keys stored in an HSM.
	HSMClientCertificateIdentifier *string `locationName:"HsmClientCertificateIdentifier" type:"string"`

	// Specifies the name of the HSM configuration that contains the information
	// the Amazon Redshift cluster can use to retrieve and store keys in an HSM.
	HSMConfigurationIdentifier *string `locationName:"HsmConfigurationIdentifier" type:"string"`

	// The AWS Key Management Service (KMS) key ID of the encryption key that you
	// want to use to encrypt data in the cluster that you restore from a shared
	// snapshot.
	KMSKeyID *string `locationName:"KmsKeyId" type:"string"`

	// The AWS customer account used to create or copy the snapshot. Required if
	// you are restoring a snapshot you do not own, optional if you own the snapshot.
	OwnerAccount *string `type:"string"`

	// The port number on which the cluster accepts connections.
	//
	// Default: The same port as the original cluster.
	//
	// Constraints: Must be between 1115 and 65535.
	Port *int64 `type:"integer"`

	// The weekly time range (in UTC) during which automated cluster maintenance
	// can occur.
	//
	//  Format: ddd:hh24:mi-ddd:hh24:mi
	//
	//  Default: The value selected for the cluster from which the snapshot was
	// taken. For more information about the time blocks for each region, see Maintenance
	// Windows (http://docs.aws.amazon.com/redshift/latest/mgmt/working-with-clusters.html#rs-maintenance-windows)
	// in Amazon Redshift Cluster Management Guide.
	//
	// Valid Days: Mon | Tue | Wed | Thu | Fri | Sat | Sun
	//
	// Constraints: Minimum 30-minute window.
	PreferredMaintenanceWindow *string `type:"string"`

	// If true, the cluster can be accessed from a public network.
	PubliclyAccessible *bool `type:"boolean"`

	// The name of the cluster the source snapshot was created from. This parameter
	// is required if your IAM user has a policy containing a snapshot resource
	// element that specifies anything other than * for the cluster name.
	SnapshotClusterIdentifier *string `type:"string"`

	// The name of the snapshot from which to create the new cluster. This parameter
	// isn't case sensitive.
	//
	// Example: my-snapshot-id
	SnapshotIdentifier *string `type:"string" required:"true"`

	// A list of Virtual Private Cloud (VPC) security groups to be associated with
	// the cluster.
	//
	//  Default: The default VPC security group is associated with the cluster.
	//
	//  VPC security groups only apply to clusters in VPCs.
	VPCSecurityGroupIDs []*string `locationName:"VpcSecurityGroupIds" locationNameList:"VpcSecurityGroupId" type:"list"`
	// contains filtered or unexported fields
}

type RestoreFromClusterSnapshotOutput 

type RestoreFromClusterSnapshotOutput struct {
	// Describes a cluster.
	Cluster *Cluster `type:"structure"`
	// contains filtered or unexported fields
}

type RestoreStatus 

type RestoreStatus struct {
	// The number of megabytes per second being transferred from the backup storage.
	// Returns the average rate for a completed backup.
	CurrentRestoreRateInMegaBytesPerSecond *float64 `type:"double"`

	// The amount of time an in-progress restore has been running, or the amount
	// of time it took a completed restore to finish.
	ElapsedTimeInSeconds *int64 `type:"long"`

	// The estimate of the time remaining before the restore will complete. Returns
	// 0 for a completed restore.
	EstimatedTimeToCompletionInSeconds *int64 `type:"long"`

	// The number of megabytes that have been transferred from snapshot storage.
	ProgressInMegaBytes *int64 `type:"long"`

	// The size of the set of snapshot data used to restore the cluster.
	SnapshotSizeInMegaBytes *int64 `type:"long"`

	// The status of the restore action. Returns starting, restoring, completed,
	// or failed.
	Status *string `type:"string"`
	// contains filtered or unexported fields
}

Describes the status of a cluster restore action. Returns null if the cluster was not created by restoring a snapshot.

type RevokeClusterSecurityGroupIngressInput 

type RevokeClusterSecurityGroupIngressInput struct {
	// The IP range for which to revoke access. This range must be a valid Classless
	// Inter-Domain Routing (CIDR) block of IP addresses. If CIDRIP is specified,
	// EC2SecurityGroupName and EC2SecurityGroupOwnerId cannot be provided.
	CIDRIP *string `type:"string"`

	// The name of the security Group from which to revoke the ingress rule.
	ClusterSecurityGroupName *string `type:"string" required:"true"`

	// The name of the EC2 Security Group whose access is to be revoked. If EC2SecurityGroupName
	// is specified, EC2SecurityGroupOwnerId must also be provided and CIDRIP cannot
	// be provided.
	EC2SecurityGroupName *string `type:"string"`

	// The AWS account number of the owner of the security group specified in the
	// EC2SecurityGroupName parameter. The AWS access key ID is not an acceptable
	// value. If EC2SecurityGroupOwnerId is specified, EC2SecurityGroupName must
	// also be provided. and CIDRIP cannot be provided.
	//
	// Example: 111122223333
	EC2SecurityGroupOwnerID *string `locationName:"EC2SecurityGroupOwnerId" type:"string"`
	// contains filtered or unexported fields
}

???

type RevokeClusterSecurityGroupIngressOutput 

type RevokeClusterSecurityGroupIngressOutput struct {
	// Describes a security group.
	ClusterSecurityGroup *ClusterSecurityGroup `type:"structure"`
	// contains filtered or unexported fields
}

type RevokeSnapshotAccessInput 

type RevokeSnapshotAccessInput struct {
	// The identifier of the AWS customer account that can no longer restore the
	// specified snapshot.
	AccountWithRestoreAccess *string `type:"string" required:"true"`

	// The identifier of the cluster the snapshot was created from. This parameter
	// is required if your IAM user has a policy containing a snapshot resource
	// element that specifies anything other than * for the cluster name.
	SnapshotClusterIdentifier *string `type:"string"`

	// The identifier of the snapshot that the account can no longer access.
	SnapshotIdentifier *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

type RevokeSnapshotAccessOutput 

type RevokeSnapshotAccessOutput struct {
	// Describes a snapshot.
	Snapshot *Snapshot `type:"structure"`
	// contains filtered or unexported fields
}

type RotateEncryptionKeyInput 

type RotateEncryptionKeyInput struct {
	// The unique identifier of the cluster that you want to rotate the encryption
	// keys for.
	//
	//  Constraints: Must be the name of valid cluster that has encryption enabled.
	ClusterIdentifier *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

type RotateEncryptionKeyOutput 

type RotateEncryptionKeyOutput struct {
	// Describes a cluster.
	Cluster *Cluster `type:"structure"`
	// contains filtered or unexported fields
}

type Snapshot 

type Snapshot struct {
	// A list of the AWS customer accounts authorized to restore the snapshot. Returns
	// null if no accounts are authorized. Visible only to the snapshot owner.
	AccountsWithRestoreAccess []*AccountWithRestoreAccess `locationNameList:"AccountWithRestoreAccess" type:"list"`

	// The size of the incremental backup.
	ActualIncrementalBackupSizeInMegaBytes *float64 `type:"double"`

	// The Availability Zone in which the cluster was created.
	AvailabilityZone *string `type:"string"`

	// The number of megabytes that have been transferred to the snapshot backup.
	BackupProgressInMegaBytes *float64 `type:"double"`

	// The time (UTC) when the cluster was originally created.
	ClusterCreateTime *time.Time `type:"timestamp" timestampFormat:"iso8601"`

	// The identifier of the cluster for which the snapshot was taken.
	ClusterIdentifier *string `type:"string"`

	// The version ID of the Amazon Redshift engine that is running on the cluster.
	ClusterVersion *string `type:"string"`

	// The number of megabytes per second being transferred to the snapshot backup.
	// Returns 0 for a completed backup.
	CurrentBackupRateInMegaBytesPerSecond *float64 `type:"double"`

	// The name of the database that was created when the cluster was created.
	DBName *string `type:"string"`

	// The amount of time an in-progress snapshot backup has been running, or the
	// amount of time it took a completed backup to finish.
	ElapsedTimeInSeconds *int64 `type:"long"`

	// If true, the data in the snapshot is encrypted at rest.
	Encrypted *bool `type:"boolean"`

	// A boolean that indicates whether the snapshot data is encrypted using the
	// HSM keys of the source cluster. true indicates that the data is encrypted
	// using HSM keys.
	EncryptedWithHSM *bool `type:"boolean"`

	// The estimate of the time remaining before the snapshot backup will complete.
	// Returns 0 for a completed backup.
	EstimatedSecondsToCompletion *int64 `type:"long"`

	// The AWS Key Management Service (KMS) key ID of the encryption key that was
	// used to encrypt data in the cluster from which the snapshot was taken.
	KMSKeyID *string `locationName:"KmsKeyId" type:"string"`

	// The master user name for the cluster.
	MasterUsername *string `type:"string"`

	// The node type of the nodes in the cluster.
	NodeType *string `type:"string"`

	// The number of nodes in the cluster.
	NumberOfNodes *int64 `type:"integer"`

	// For manual snapshots, the AWS customer account used to create or copy the
	// snapshot. For automatic snapshots, the owner of the cluster. The owner can
	// perform all snapshot actions, such as sharing a manual snapshot.
	OwnerAccount *string `type:"string"`

	// The port that the cluster is listening on.
	Port *int64 `type:"integer"`

	// The time (UTC) when Amazon Redshift began the snapshot. A snapshot contains
	// a copy of the cluster data as of this exact time.
	SnapshotCreateTime *time.Time `type:"timestamp" timestampFormat:"iso8601"`

	// The snapshot identifier that is provided in the request.
	SnapshotIdentifier *string `type:"string"`

	// The snapshot type. Snapshots created using CreateClusterSnapshot and CopyClusterSnapshot
	// will be of type "manual".
	SnapshotType *string `type:"string"`

	// The source region from which the snapshot was copied.
	SourceRegion *string `type:"string"`

	// The snapshot status. The value of the status depends on the API operation
	// used.   CreateClusterSnapshot and CopyClusterSnapshot returns status as "creating".
	//   DescribeClusterSnapshots returns status as "creating", "available", "final
	// snapshot", or "failed".  DeleteClusterSnapshot returns status as "deleted".
	Status *string `type:"string"`

	// The list of tags for the cluster snapshot.
	Tags []*Tag `locationNameList:"Tag" type:"list"`

	// The size of the complete set of backup data that would be used to restore
	// the cluster.
	TotalBackupSizeInMegaBytes *float64 `type:"double"`

	// The VPC identifier of the cluster if the snapshot is from a cluster in a
	// VPC. Otherwise, this field is not in the output.
	VPCID *string `locationName:"VpcId" type:"string"`
	// contains filtered or unexported fields
}

Describes a snapshot.

type Subnet 

type Subnet struct {
	// Describes an availability zone.
	SubnetAvailabilityZone *AvailabilityZone `type:"structure"`

	// The identifier of the subnet.
	SubnetIdentifier *string `type:"string"`

	// The status of the subnet.
	SubnetStatus *string `type:"string"`
	// contains filtered or unexported fields
}

Describes a subnet.

type Tag 

type Tag struct {
	// The key, or name, for the resource tag.
	Key *string `type:"string"`

	// The value for the resource tag.
	Value *string `type:"string"`
	// contains filtered or unexported fields
}

A tag consisting of a name/value pair for a resource.

type TaggedResource 

type TaggedResource struct {
	// The Amazon Resource Name (ARN) with which the tag is associated. For example,
	// arn:aws:redshift:us-east-1:123456789:cluster:t1.
	ResourceName *string `type:"string"`

	// The type of resource with which the tag is associated. Valid resource types
	// are:  Cluster CIDR/IP EC2 security group Snapshot Cluster security group
	// Subnet group HSM connection HSM certificate Parameter group
	//
	//  For more information about Amazon Redshift resource types and constructing
	// ARNs, go to Constructing an Amazon Redshift Amazon Resource Name (ARN) (http://docs.aws.amazon.com/redshift/latest/mgmt/constructing-redshift-arn.html)
	// in the Amazon Redshift Cluster Management Guide.
	ResourceType *string `type:"string"`

	// The tag for the resource.
	Tag *Tag `type:"structure"`
	// contains filtered or unexported fields
}

A tag and its associated resource.

type VPCSecurityGroupMembership 

type VPCSecurityGroupMembership struct {
	Status *string `type:"string"`

	VPCSecurityGroupID *string `locationName:"VpcSecurityGroupId" type:"string"`
	// contains filtered or unexported fields
}

Describes the members of a VPC security group.

Source Files

View all Source files

Directories

Path Synopsis
Package redshiftiface provides an interface for the Amazon Redshift.
 Package redshiftiface provides an interface for the Amazon Redshift.

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.