unicreds

package module
v1.4.0 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Aug 9, 2016 License: MIT Imports: 26 Imported by: 17

README

Build Status

unicreds

Unicreds is a command line tool to manage secrets within an AWS account, the aim is to keep securely stored with your systems and data so you don't have to manage them externally. It uses DynamoDB and KMS to store and encrypt these secrets. Access to these keys is controlled using IAM.

Unicreds is written in Go and is based on credstash.

setup

  1. Create a KMS key in IAM, using an aws profile you have configured in the aws CLI. You can ommit --profile if you use the Default profile.
aws --region ap-southeast-2 --profile [yourawsprofile] kms create-key --query 'KeyMetadata.KeyId'
  1. Assign the credstash alias to the key using the key id printed when you created the KMS key.
aws --region ap-southeast-2 --profile [yourawsprofile] kms create-alias --alias-name 'alias/credstash' --target-key-id "arn:aws:kms:ap-southeast-2:xxxx:key/xxxx-xxxx-xxxx-xxxx-xxxx"
  1. Run unicreds setup to create the dynamodb table in your region, ensure you have your credentials configured using the awscli.
unicreds setup --region ap-southeast-2 --profile [yourawsprofile]

NOTE: It is really important to tune DynamoDB to your read and write requirements if your using unicreds with automation!

usage

usage: unicreds [<flags>] <command> [<args> ...]

A credential/secret storage command line tool.

Flags:
      --help                     Show context-sensitive help (also try --help-long and
                                 --help-man).
  -c, --csv                      Enable csv output for table data.
  -d, --debug                    Enable debug mode.
  -j, --json                     Output results in JSON
  -r, --region=REGION            Configure the AWS region
  -p, --profile=PROFILE          Configure the AWS profile
  -t, --table="credential-store"  
                                 DynamoDB table.
  -k, --alias="alias/credstash"  KMS key alias.
  -E, --enc-context=ENC-CONTEXT ...  
                                 Add a key value pair to the encryption context.
      --version                  Show application version.

Commands:
  help [<command>...]
    Show help.

  setup
    Setup the dynamodb table used to store credentials.

  get <credential>
    Get a credential from the store.

  getall [<flags>]
    Get latest credentials from the store.

  list [<flags>]
    List latest credentials with names and version.

  put <credential> <value> [<version>]
    Put a credential into the store.

  put-file <credential> <value> [<version>]
    Put a credential from a file into the store.

  delete <credential>
    Delete a credential from the store.

install

If your on OSX you can install unicreds using homebrew now!

brew tap versent/homebrew-taps
brew install unicreds

Otherwise grab an archive from the github releases page.

why

The number one reason for this port is platform support, getting credstash running on Windows and some older versions of Redhat Enterprise is a pain. Go enables deployment of tools across a range of platforms with very little friction.

In addition to this we have some ideas about how this tool can be expanded to support some interesting use cases we have internally.

That said we have learnt a lot from how credstash worked and aim to remain compatible with it in the future where possible.

development

I use scantest to watch my code and run tests on save.

go get github.com/smartystreets/scantest

todo

  • Add the ability to filter list / getall results using DynamoDB filters, at the moment I just use | grep blah.
  • Work on the output layout.
  • Make it easier to import files

license

This code is Copyright (c) 2015 Versent and released under the MIT license. All rights not explicitly granted in the MIT license are reserved. See the included LICENSE.md file for more details.

Documentation

Index

Constants

View Source 
const (
	// TableFormatTerm format the table for a terminal session
	TableFormatTerm = iota // 0
	// TableFormatCSV format the table as CSV
	TableFormatCSV // 1
)
View Source 
const (
	// DefaultKmsKey default KMS key alias name
	DefaultKmsKey = "alias/credstash"

	// CreatedAtNotAvailable returned to indicate the created at field is missing
	// from the secret/Name
	CreatedAtNotAvailable = "Not Available"
)

Variables

View Source 
var (

	// ErrSecretNotFound returned when unable to find the specified secret in dynamodb
	ErrSecretNotFound = errors.New("Secret Not Found")

	// ErrHmacValidationFailed returned when the hmac signature validation fails
	ErrHmacValidationFailed = errors.New("Secret HMAC validation failed")

	// ErrTimeout timeout occured waiting for dynamodb table to create
	ErrTimeout = errors.New("Timed out waiting for dynamodb table to become active")
)

Functions

func ComputeHmac256 

func ComputeHmac256(message, secret []byte) string

ComputeHmac256 compute a hmac256 signature of the supplied message and return the value hex encoded

func Decode 

func Decode(data map[string]*dynamodb.AttributeValue, rawVal interface{}) error

Decode decode the supplied struct from the dynamodb result map

func Decrypt 

func Decrypt(key, ciphertext []byte) ([]byte, error)

Decrypt AES encryption method which matches the pycrypto package using CTR and AES256. Note this routine seeds the counter/iv with a value of 1 then throws it away?!

func DeleteSecret 

func DeleteSecret(tableName *string, name string) error

DeleteSecret delete a secret

func Encode 

func Encode(rawVal interface{}) (map[string]*dynamodb.AttributeValue, error)

Encode return the value encoded as a map of dynamo attributes.

func Encrypt 

func Encrypt(key, plaintext []byte) ([]byte, error)

Encrypt AES encryption method which matches the pycrypto package using CTR and AES256. Note this routine seeds the counter/iv with a value of 1 then throws it away?!

func GetHighestVersion added in v1.1.0 

func GetHighestVersion(tableName *string, name string) (string, error)

GetHighestVersion look up the highest version for a given name

func PutSecret 

func PutSecret(tableName *string, alias, name, secret, version string, encContext *EncryptionContextValue) error

PutSecret retrieve the secret from dynamodb

func ResolveVersion added in v1.1.0 

func ResolveVersion(tableName *string, name string, version int) (string, error)

ResolveVersion calculate the version given a name and version

func SetAwsConfig added in v1.4.0 

func SetAwsConfig(region, profile *string) error

SetAwsConfig configure the AWS region with a fallback for discovery on EC2 hosts.

func SetDynamoDBConfig added in v1.0.2 

func SetDynamoDBConfig(config *aws.Config)

SetDynamoDBConfig override the default aws configuration

func SetKMSConfig added in v1.0.2 

func SetKMSConfig(config *aws.Config)

SetKMSConfig override the default aws configuration

func Setup 

func Setup(tableName *string, read *int64, write *int64) (err error)

Setup create the table which stores credentials

Types

type ByName added in v1.2.0 

type ByName []*Credential

ByName sort by name

func (ByName) Len added in v1.2.0 

func (slice ByName) Len() int

func (ByName) Less added in v1.2.0 

func (slice ByName) Less(i, j int) bool

func (ByName) Swap added in v1.2.0 

func (slice ByName) Swap(i, j int)

type ByVersion added in v1.1.0 

type ByVersion []*Credential

ByVersion sort helper for credentials

func (ByVersion) Len added in v1.1.0 

func (a ByVersion) Len() int

func (ByVersion) Less added in v1.1.0 

func (a ByVersion) Less(i, j int) bool

func (ByVersion) Swap added in v1.1.0 

func (a ByVersion) Swap(i, j int)

type Credential 

type Credential struct {
	Name      string `dynamodbav:"name"`
	Version   string `dynamodbav:"version"`
	Key       string `dynamodbav:"key"`
	Contents  string `dynamodbav:"contents"`
	Hmac      string `dynamodbav:"hmac"`
	CreatedAt int64  `dynamodbav:"created_at"`
}

Credential managed credential information

func ListSecrets 

func ListSecrets(tableName *string, allVersions bool) ([]*Credential, error)

ListSecrets returns a list of all secrets

func (*Credential) CreatedAtDate added in v1.0.3 

func (c *Credential) CreatedAtDate() string

CreatedAtDate convert the timestamp field to a date string

type DataKey 

type DataKey struct {
	CiphertextBlob []byte
	Plaintext      []byte
}

DataKey which contains the details of the KMS key

func DecryptDataKey 

func DecryptDataKey(ciphertext []byte, encContext *EncryptionContextValue) (*DataKey, error)

DecryptDataKey ask kms to decrypt the supplied data key

func GenerateDataKey 

func GenerateDataKey(alias string, encContext *EncryptionContextValue, size int) (*DataKey, error)

GenerateDataKey simplified method for generating a datakey with kms

type DecryptedCredential 

type DecryptedCredential struct {
	*Credential
	Secret string
}

DecryptedCredential managed credential information

func GetAllSecrets added in v1.1.0 

func GetAllSecrets(tableName *string, allVersions bool) ([]*DecryptedCredential, error)

GetAllSecrets returns a list of all secrets

func GetSecret 

func GetSecret(tableName *string, name string, encContext *EncryptionContextValue) (*DecryptedCredential, error)

GetSecret retrieve the secret from dynamodb using the name

type EncryptionContextValue added in v1.4.0 

type EncryptionContextValue map[string]*string

EncryptionContextValue key value with helper methods for flag parser

func NewEncryptionContextValue added in v1.4.0 

func NewEncryptionContextValue() *EncryptionContextValue

NewEncryptionContextValue create a new encryption context

func (*EncryptionContextValue) IsCumulative added in v1.4.0 

func (h *EncryptionContextValue) IsCumulative() bool

IsCumulative flag this value as cumulative

func (*EncryptionContextValue) Set added in v1.4.0 

func (h *EncryptionContextValue) Set(value string) error

Set converts a flag value into an encryption context key value

func (*EncryptionContextValue) String added in v1.4.0 

func (h *EncryptionContextValue) String() string

type TableWriter 

type TableWriter struct {
	// contains filtered or unexported fields
}

TableWriter enables writing of tables in a variety of formats

func NewTable 

func NewTable(wr io.Writer) *TableWriter

NewTable create a new table writer

func (*TableWriter) BulkWrite 

func (tw *TableWriter) BulkWrite(rows [][]string)

BulkWrite append an array of rows to the buffer

func (*TableWriter) Render 

func (tw *TableWriter) Render() error

Render render the table out to the supplied writer

func (*TableWriter) SetFormat 

func (tw *TableWriter) SetFormat(tableFormat int)

SetFormat set the format

func (*TableWriter) SetHeaders 

func (tw *TableWriter) SetHeaders(headers []string)

SetHeaders set the column headers

func (*TableWriter) Write 

func (tw *TableWriter) Write(row []string)

Source Files

View all Source files

Directories

Path Synopsis
cmd
unicreds

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.