net

package
v0.0.0-...-9ea5951 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Nov 16, 2020 License: BSD-3-Clause Imports: 18 Imported by: 0

Documentation

Overview

Package net provides a portable interface for network I/O, including TCP/IP, UDP, domain name resolution, and Unix domain sockets.

Although the package provides access to low-level networking primitives, most clients will need only the basic interface provided by the Dial, Listen, and Accept functions and the associated Conn and Listener interfaces. The crypto/tls package uses the same interfaces and similar Dial and Listen functions.

The Dial function connects to a server: 

conn, err := net.Dial("tcp", "golang.org:80")
if err != nil {
	// handle error
}
fmt.Fprintf(conn, "GET / HTTP/1.0\r\n\r\n")
status, err := bufio.NewReader(conn).ReadString('\n')
// ...

The Listen function creates servers: 

ln, err := net.Listen("tcp", ":8080")
if err != nil {
	// handle error
}
for {
	conn, err := ln.Accept()
	if err != nil {
		// handle error
	}
	go handleConnection(conn)
}

Name Resolution

The method for resolving domain names, whether indirectly with functions like Dial or directly with functions like LookupHost and LookupAddr, varies by operating system.

On Unix systems, the resolver has two options for resolving names. It can use a pure Go resolver that sends DNS requests directly to the servers listed in /etc/resolv.conf, or it can use a cgo-based resolver that calls C library routines such as getaddrinfo and getnameinfo.

By default the pure Go resolver is used, because a blocked DNS request consumes only a goroutine, while a blocked C call consumes an operating system thread. When cgo is available, the cgo-based resolver is used instead under a variety of conditions: on systems that do not let programs make direct DNS requests (OS X), when the LOCALDOMAIN environment variable is present (even if empty), when the RES_OPTIONS or HOSTALIASES environment variable is non-empty, when the ASR_CONFIG environment variable is non-empty (OpenBSD only), when /etc/resolv.conf or /etc/nsswitch.conf specify the use of features that the Go resolver does not implement, and when the name being looked up ends in .local or is an mDNS name.

The resolver decision can be overridden by setting the netdns value of the GODEBUG environment variable (see package runtime) to go or cgo, as in: 

export GODEBUG=netdns=go    # force pure Go resolver
export GODEBUG=netdns=cgo   # force cgo resolver

The decision can also be forced while building the Go source tree by setting the netgo or netcgo build tag.

A numeric netdns setting, as in GODEBUG=netdns=1, causes the resolver to print debugging information about its decisions. To force a particular resolver while also printing debugging information, join the two settings by a plus sign, as in GODEBUG=netdns=go+1.

On Plan 9, the resolver always accesses /net/cs and /net/dns.

On Windows, the resolver always uses C library functions, such as GetAddrInfo and DnsQuery.

Index

Examples

Constants

View Source 
const (
	IPv4len = 4
	IPv6len = 16
)

IP address lengths (bytes).

Variables

View Source 
var (
	IPv4bcast     = IPv4(255, 255, 255, 255) // limited broadcast
	IPv4allsys    = IPv4(224, 0, 0, 1)       // all systems
	IPv4allrouter = IPv4(224, 0, 0, 2)       // all routers
	IPv4zero      = IPv4(0, 0, 0, 0)         // all zeros
)

Well-known IPv4 addresses

View Source 
var (
	IPv6zero                   = IP{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}
	IPv6unspecified            = IP{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}
	IPv6loopback               = IP{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1}
	IPv6interfacelocalallnodes = IP{0xff, 0x01, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x01}
	IPv6linklocalallnodes      = IP{0xff, 0x02, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x01}
	IPv6linklocalallrouters    = IP{0xff, 0x02, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x02}
)

Well-known IPv6 addresses

View Source 
var DefaultResolver = &Resolver{}

DefaultResolver is the resolver used by the package-level Lookup functions and by Dialers without a specified Resolver.

View Source 
var (
	ErrWriteToConnected = errors.New("use of WriteTo with pre-connected connection")
)

Various errors contained in OpError.

Functions

func JoinHostPort 

func JoinHostPort(host, port string) string

JoinHostPort combines host and port into a network address of the form "host:port". If host contains a colon, as found in literal IPv6 addresses, then JoinHostPort returns "[host]:port".

See func Dial for a description of the host and port parameters.

func LookupAddr 

func LookupAddr(addr string) (names []string, err error)

LookupAddr performs a reverse lookup for the given address, returning a list of names mapping to that address.

When using the host C library resolver, at most one result will be returned. To bypass the host resolver, use a custom Resolver.

func LookupCNAME 

func LookupCNAME(host string) (cname string, err error)

LookupCNAME returns the canonical name for the given host. Callers that do not care about the canonical name can call LookupHost or LookupIP directly; both take care of resolving the canonical name as part of the lookup.

A canonical name is the final name after following zero or more CNAME records. LookupCNAME does not return an error if host does not contain DNS "CNAME" records, as long as host resolves to address records.

func LookupHost 

func LookupHost(host string) (addrs []string, err error)

LookupHost looks up the given host using the local resolver. It returns a slice of that host's addresses.

func LookupPort 

func LookupPort(network, service string) (port int, err error)

LookupPort looks up the port for the given network and service.

func LookupTXT 

func LookupTXT(name string) ([]string, error)

LookupTXT returns the DNS TXT records for the given domain name.

func ParseCIDR 

func ParseCIDR(s string) (IP, *IPNet, error)

ParseCIDR parses s as a CIDR notation IP address and prefix length, like "192.0.2.0/24" or "2001:db8::/32", as defined in RFC 4632 and RFC 4291.

It returns the IP address and the network implied by the IP and prefix length. For example, ParseCIDR("192.0.2.1/24") returns the IP address 192.0.2.1 and the network 192.0.2.0/24.

Example 
package main

import (
	"fmt"
	"log"
	"net"
)

func main() {
	ipv4Addr, ipv4Net, err := net.ParseCIDR("192.0.2.1/24")
	if err != nil {
		log.Fatal(err)
	}
	fmt.Println(ipv4Addr)
	fmt.Println(ipv4Net)

	ipv6Addr, ipv6Net, err := net.ParseCIDR("2001:db8:a0b:12f0::1/32")
	if err != nil {
		log.Fatal(err)
	}
	fmt.Println(ipv6Addr)
	fmt.Println(ipv6Net)

}

Output:

192.0.2.1
192.0.2.0/24
2001:db8:a0b:12f0::1
2001:db8::/32

func Pipe 

func Pipe() (Conn, Conn)

Pipe creates a synchronous, in-memory, full duplex network connection; both ends implement the Conn interface. Reads on one end are matched with writes on the other, copying data directly between the two; there is no internal buffering.

func SplitHostPort 

func SplitHostPort(hostport string) (host, port string, err error)

SplitHostPort splits a network address of the form "host:port", "host%zone:port", "[host]:port" or "[host%zone]:port" into host or host%zone and port.

A literal IPv6 address in hostport must be enclosed in square brackets, as in "[::1]:80", "[::1%lo0]:80".

See func Dial for a description of the hostport parameter, and host and port results. SplitHostPort 拆分网络地址，返回 host , port

Types

type Addr 

type Addr interface {
	Network() string // name of the network (for example, "tcp", "udp")
	String() string  // string form of address (for example, "192.0.2.1:25", "[2001:db8::1]:80")
}

Addr represents a network end point address.

The two methods Network and String conventionally return strings that can be passed as the arguments to Dial, but the exact form and meaning of the strings is up to the implementation.

func InterfaceAddrs 

func InterfaceAddrs() ([]Addr, error)

InterfaceAddrs returns a list of the system's unicast interface addresses.

The returned list does not identify the associated interface; use Interfaces and Interface.Addrs for more detail.

type AddrError 

type AddrError struct {
	Err  string
	Addr string
}

func (*AddrError) Error 

func (e *AddrError) Error() string

func (*AddrError) Temporary 

func (e *AddrError) Temporary() bool

func (*AddrError) Timeout 

func (e *AddrError) Timeout() bool

type Buffers 

type Buffers [][]byte

Buffers contains zero or more runs of bytes to write.

On certain machines, for certain types of connections, this is optimized into an OS-specific batch write operation (such as "writev").

func (*Buffers) Read 

func (v *Buffers) Read(p []byte) (n int, err error)

func (*Buffers) WriteTo 

func (v *Buffers) WriteTo(w io.Writer) (n int64, err error)

type Conn 

type Conn interface {
	// Read reads data from the connection.
	// Read can be made to time out and return an Error with Timeout() == true
	// after a fixed time limit; see SetDeadline and SetReadDeadline.
	Read(b []byte) (n int, err error)

	// Write writes data to the connection.
	// Write can be made to time out and return an Error with Timeout() == true
	// after a fixed time limit; see SetDeadline and SetWriteDeadline.
	Write(b []byte) (n int, err error)

	// Close closes the connection.
	// Any blocked Read or Write operations will be unblocked and return errors.
	Close() error

	// LocalAddr returns the local network address.
	LocalAddr() Addr

	// RemoteAddr returns the remote network address.
	RemoteAddr() Addr

	// SetDeadline sets the read and write deadlines associated
	// with the connection. It is equivalent to calling both
	// SetReadDeadline and SetWriteDeadline.
	//
	// A deadline is an absolute time after which I/O operations
	// fail with a timeout (see type Error) instead of
	// blocking. The deadline applies to all future and pending
	// I/O, not just the immediately following call to Read or
	// Write. After a deadline has been exceeded, the connection
	// can be refreshed by setting a deadline in the future.
	//
	// An idle timeout can be implemented by repeatedly extending
	// the deadline after successful Read or Write calls.
	//
	// A zero value for t means I/O operations will not time out.
	SetDeadline(t time.Time) error

	// SetReadDeadline sets the deadline for future Read calls
	// and any currently-blocked Read call.
	// A zero value for t means Read will not time out.
	SetReadDeadline(t time.Time) error

	// SetWriteDeadline sets the deadline for future Write calls
	// and any currently-blocked Write call.
	// Even if write times out, it may return n > 0, indicating that
	// some of the data was successfully written.
	// A zero value for t means Write will not time out.
	SetWriteDeadline(t time.Time) error
}

Conn is a generic stream-oriented network connection.

Multiple goroutines may invoke methods on a Conn simultaneously.

func Dial 

func Dial(network, address string) (Conn, error)

Dial connects to the address on the named network.

Known networks are "tcp", "tcp4" (IPv4-only), "tcp6" (IPv6-only), "udp", "udp4" (IPv4-only), "udp6" (IPv6-only), "ip", "ip4" (IPv4-only), "ip6" (IPv6-only), "unix", "unixgram" and "unixpacket".

For TCP and UDP networks, the address has the form "host:port". The host must be a literal IP address, or a host name that can be resolved to IP addresses. The port must be a literal port number or a service name. If the host is a literal IPv6 address it must be enclosed in square brackets, as in "[2001:db8::1]:80" or "[fe80::1%zone]:80". The zone specifies the scope of the literal IPv6 address as defined in RFC 4007. The functions JoinHostPort and SplitHostPort manipulate a pair of host and port in this form. When using TCP, and the host resolves to multiple IP addresses, Dial will try each IP address in order until one succeeds.

Examples: 

Dial("tcp", "golang.org:http")
Dial("tcp", "192.0.2.1:http")
Dial("tcp", "198.51.100.1:80")
Dial("udp", "[2001:db8::1]:domain")
Dial("udp", "[fe80::1%lo0]:53")
Dial("tcp", ":80")

For IP networks, the network must be "ip", "ip4" or "ip6" followed by a colon and a literal protocol number or a protocol name, and the address has the form "host". The host must be a literal IP address or a literal IPv6 address with zone. It depends on each operating system how the operating system behaves with a non-well known protocol number such as "0" or "255".

Examples: 

Dial("ip4:1", "192.0.2.1")
Dial("ip6:ipv6-icmp", "2001:db8::1")
Dial("ip6:58", "fe80::1%lo0")

For TCP, UDP and IP networks, if the host is empty or a literal unspecified IP address, as in ":80", "0.0.0.0:80" or "[::]:80" for TCP and UDP, "", "0.0.0.0" or "::" for IP, the local system is assumed.

For Unix networks, the address must be a file system path. Dial 网络连接，上面列举了很多调用样例

func DialTimeout 

func DialTimeout(network, address string, timeout time.Duration) (Conn, error)

DialTimeout acts like Dial but takes a timeout.

The timeout includes name resolution, if required. When using TCP, and the host in the address parameter resolves to multiple IP addresses, the timeout is spread over each consecutive dial, such that each is given an appropriate fraction of the time to connect.

See func Dial for a description of the network and address parameters. Dial + Timeout DialTimeout 超时版本的 Dial

func FileConn 

func FileConn(f *os.File) (c Conn, err error)

FileConn returns a copy of the network connection corresponding to the open file f. It is the caller's responsibility to close f when finished. Closing c does not affect f, and closing f does not affect c.

type DNSConfigError 

type DNSConfigError struct {
	Err error
}

DNSConfigError represents an error reading the machine's DNS configuration. (No longer used; kept for compatibility.)

func (*DNSConfigError) Error 

func (e *DNSConfigError) Error() string

func (*DNSConfigError) Temporary 

func (e *DNSConfigError) Temporary() bool

func (*DNSConfigError) Timeout 

func (e *DNSConfigError) Timeout() bool

type DNSError 

type DNSError struct {
	Err         string // description of the error
	Name        string // name looked for
	Server      string // server used
	IsTimeout   bool   // if true, timed out; not all timeouts set this
	IsTemporary bool   // if true, error is temporary; not all errors set this
}

DNSError represents a DNS lookup error.

func (*DNSError) Error 

func (e *DNSError) Error() string

func (*DNSError) Temporary 

func (e *DNSError) Temporary() bool

Temporary reports whether the DNS error is known to be temporary. This is not always known; a DNS lookup may fail due to a temporary error and return a DNSError for which Temporary returns false.

func (*DNSError) Timeout 

func (e *DNSError) Timeout() bool

Timeout reports whether the DNS lookup is known to have timed out. This is not always known; a DNS lookup may fail due to a timeout and return a DNSError for which Timeout returns false.

type Dialer 

type Dialer struct {
	// Timeout is the maximum amount of time a dial will wait for
	// a connect to complete. If Deadline is also set, it may fail
	// earlier.
	//
	// The default is no timeout.
	//
	// When using TCP and dialing a host name with multiple IP
	// addresses, the timeout may be divided between them.
	//
	// With or without a timeout, the operating system may impose
	// its own earlier timeout. For instance, TCP timeouts are
	// often around 3 minutes.
	// 超时时间，默认不超时。操作系统有设置超时，TCP 3 分钟左右。
	Timeout time.Duration

	// Deadline is the absolute point in time after which dials
	// will fail. If Timeout is set, it may fail earlier.
	// Zero means no deadline, or dependent on the operating system
	// as with the Timeout option.
	// Deadline 截止时间是拨号失败的绝对时间点。
	Deadline time.Time

	// LocalAddr is the local address to use when dialing an
	// address. The address must be of a compatible type for the
	// network being dialed.
	// If nil, a local address is automatically chosen.
	// 本地地址，如果为 nil 则会自动选择。
	LocalAddr Addr

	// DualStack previously enabled RFC 6555 Fast Fallback
	// support, also known as "Happy Eyeballs", in which IPv4 is
	// tried soon if IPv6 appears to be misconfigured and
	// hanging.
	//
	// Deprecated: Fast Fallback is enabled by default. To
	// disable, set FallbackDelay to a negative value.
	// 双协议栈，即是否同时支持 ipv4 和 ipv6 。当 network 值为 tcp 时，Dial 函数会向 v4 和 v6 地址都发起连接。
	DualStack bool

	// FallbackDelay specifies the length of time to wait before
	// spawning a RFC 6555 Fast Fallback connection. That is, this
	// is the amount of time to wait for IPv6 to succeed before
	// assuming that IPv6 is misconfigured and falling back to
	// IPv4.
	//
	// If zero, a default delay of 300ms is used.
	// A negative value disables Fast Fallback support.
	// 当 DualStack 为 true ，ipv6 会延后于 ipv4 发起，此字段即为延迟时间，默认为 300ms
	FallbackDelay time.Duration

	// KeepAlive specifies the keep-alive period for an active
	// network connection.
	// If zero, keep-alives are enabled if supported by the protocol
	// and operating system. Network protocols or operating systems
	// that do not support keep-alives ignore this field.
	// If negative, keep-alives are disabled.
	// KeepAlive 指定活动网络连接的保持活动时间。如果为零，则在协议和操作系统支持的情况下启用保持活动状态。
	// 不支持保持活动状态的网络协议或操作系统将忽略此字段。如果为负，则保持活动被禁用。
	KeepAlive time.Duration

	// Resolver optionally specifies an alternate resolver to use.
	Resolver *Resolver

	// Cancel is an optional channel whose closure indicates that
	// the dial should be canceled. Not all types of dials support
	// cancelation.
	//
	// Deprecated: Use DialContext instead.
	// Cancel 是一个可选 channel ，其关闭指示应取消拨号。 并非所有类型的拨盘都支持取消。
	// 不推荐使用，用 DialContext 来替换。
	Cancel <-chan struct{}

	// If Control is not nil, it is called after creating the network
	// connection but before actually dialing.
	//
	// Network and address parameters passed to Control method are not
	// necessarily the ones passed to Dial. For example, passing "tcp" to Dial
	// will cause the Control function to be called with "tcp4" or "tcp6".
	// 如果 Control 不为 nil ，则在创建网络连接之后但实际拨号之前将调用它。传递给 Control 方法的网络和地址参数不一定是传递给 Dial 的参数。
	Control func(network, address string, c syscall.RawConn) error
}

A Dialer contains options for connecting to an address.

The zero value for each field is equivalent to dialing without that option. Dialing with the zero value of Dialer is therefore equivalent to just calling the Dial function. Dialer 包含连接地址的一些选项，每个字段的零值相当于没有这个选项。 因此，使用 Dialer 的零值进行拨号等效于仅调用 Dial 函数。

func (*Dialer) Dial 

func (d *Dialer) Dial(network, address string) (Conn, error)

Dial connects to the address on the named network.

See func Dial for a description of the network and address parameters. Dial Dialer 的函数， 使用 context.Background() 作为 Context

func (*Dialer) DialContext 

func (d *Dialer) DialContext(ctx context.Context, network, address string) (Conn, error)

DialContext connects to the address on the named network using the provided context.

The provided Context must be non-nil. If the context expires before the connection is complete, an error is returned. Once successfully connected, any expiration of the context will not affect the connection.

When using TCP, and the host in the address parameter resolves to multiple network addresses, any dial timeout (from d.Timeout or ctx) is spread over each consecutive dial, such that each is given an appropriate fraction of the time to connect. For example, if a host has 4 IP addresses and the timeout is 1 minute, the connect to each single address will be given 15 seconds to complete before trying the next one.

See func Dial for a description of the network and address parameters. DialContext 调用者提供 Context

type Error 

type Error interface {
	error
	Timeout() bool   // Is the error a timeout?
	Temporary() bool // Is the error temporary?
}

An Error represents a network error.

type Flags 

type Flags uint
const (
	FlagUp           Flags = 1 << iota // interface is up
	FlagBroadcast                      // interface supports broadcast access capability
	FlagLoopback                       // interface is a loopback interface
	FlagPointToPoint                   // interface belongs to a point-to-point link
	FlagMulticast                      // interface supports multicast access capability
)

func (Flags) String 

func (f Flags) String() string

type HardwareAddr 

type HardwareAddr []byte

A HardwareAddr represents a physical hardware address.

func ParseMAC 

func ParseMAC(s string) (hw HardwareAddr, err error)

ParseMAC parses s as an IEEE 802 MAC-48, EUI-48, EUI-64, or a 20-octet IP over InfiniBand link-layer address using one of the following formats: 

01:23:45:67:89:ab
01:23:45:67:89:ab:cd:ef
01:23:45:67:89:ab:cd:ef:00:00:01:23:45:67:89:ab:cd:ef:00:00
01-23-45-67-89-ab
01-23-45-67-89-ab-cd-ef
01-23-45-67-89-ab-cd-ef-00-00-01-23-45-67-89-ab-cd-ef-00-00
0123.4567.89ab
0123.4567.89ab.cdef
0123.4567.89ab.cdef.0000.0123.4567.89ab.cdef.0000

func (HardwareAddr) String 

func (a HardwareAddr) String() string

type IP 

type IP []byte

An IP is a single IP address, a slice of bytes. Functions in this package accept either 4-byte (IPv4) or 16-byte (IPv6) slices as input.

Note that in this documentation, referring to an IP address as an IPv4 address or an IPv6 address is a semantic property of the address, not just the length of the byte slice: a 16-byte slice can still be an IPv4 address.

func IPv4 

func IPv4(a, b, c, d byte) IP

IPv4 returns the IP address (in 16-byte form) of the IPv4 address a.b.c.d.

Example 
package main

import (
	"fmt"
	"net"
)

func main() {
	fmt.Println(net.IPv4(8, 8, 8, 8))

}

Output:

8.8.8.8

func LookupIP 

func LookupIP(host string) ([]IP, error)

LookupIP looks up host using the local resolver. It returns a slice of that host's IPv4 and IPv6 addresses.

func ParseIP 

func ParseIP(s string) IP

ParseIP parses s as an IP address, returning the result. The string s can be in dotted decimal ("192.0.2.1") or IPv6 ("2001:db8::68") form. If s is not a valid textual representation of an IP address, ParseIP returns nil.

Example 
package main

import (
	"fmt"
	"net"
)

func main() {
	fmt.Println(net.ParseIP("192.0.2.1"))
	fmt.Println(net.ParseIP("2001:db8::68"))
	fmt.Println(net.ParseIP("192.0.2"))

}

Output:

192.0.2.1
2001:db8::68
<nil>

func (IP) DefaultMask 

func (ip IP) DefaultMask() IPMask

DefaultMask returns the default IP mask for the IP address ip. Only IPv4 addresses have default masks; DefaultMask returns nil if ip is not a valid IPv4 address.

Example 
package main

import (
	"fmt"
	"net"
)

func main() {
	ip := net.ParseIP("192.0.2.1")
	fmt.Println(ip.DefaultMask())

}

Output:

ffffff00

func (IP) Equal 

func (ip IP) Equal(x IP) bool

Equal reports whether ip and x are the same IP address. An IPv4 address and that same address in IPv6 form are considered to be equal.

func (IP) IsGlobalUnicast 

func (ip IP) IsGlobalUnicast() bool

IsGlobalUnicast reports whether ip is a global unicast address.

The identification of global unicast addresses uses address type identification as defined in RFC 1122, RFC 4632 and RFC 4291 with the exception of IPv4 directed broadcast addresses. It returns true even if ip is in IPv4 private address space or local IPv6 unicast address space.

func (IP) IsInterfaceLocalMulticast 

func (ip IP) IsInterfaceLocalMulticast() bool

IsInterfaceLocalMulticast reports whether ip is an interface-local multicast address.

func (IP) IsLinkLocalMulticast 

func (ip IP) IsLinkLocalMulticast() bool

IsLinkLocalMulticast reports whether ip is a link-local multicast address.

func (IP) IsLinkLocalUnicast 

func (ip IP) IsLinkLocalUnicast() bool

IsLinkLocalUnicast reports whether ip is a link-local unicast address.

func (IP) IsLoopback 

func (ip IP) IsLoopback() bool

IsLoopback reports whether ip is a loopback address.

func (IP) IsMulticast 

func (ip IP) IsMulticast() bool

IsMulticast reports whether ip is a multicast address.

func (IP) IsUnspecified 

func (ip IP) IsUnspecified() bool

IsUnspecified reports whether ip is an unspecified address, either the IPv4 address "0.0.0.0" or the IPv6 address "::".

func (IP) MarshalText 

func (ip IP) MarshalText() ([]byte, error)

MarshalText implements the encoding.TextMarshaler interface. The encoding is the same as returned by String, with one exception: When len(ip) is zero, it returns an empty slice.

func (IP) Mask 

func (ip IP) Mask(mask IPMask) IP

Mask returns the result of masking the IP address ip with mask.

Example 
package main

import (
	"fmt"
	"net"
)

func main() {
	ipv4Addr := net.ParseIP("192.0.2.1")
	// This mask corresponds to a /24 subnet for IPv4.
	ipv4Mask := net.CIDRMask(24, 32)
	fmt.Println(ipv4Addr.Mask(ipv4Mask))

	ipv6Addr := net.ParseIP("2001:db8:a0b:12f0::1")
	// This mask corresponds to a /32 subnet for IPv6.
	ipv6Mask := net.CIDRMask(32, 128)
	fmt.Println(ipv6Addr.Mask(ipv6Mask))

}

Output:

192.0.2.0
2001:db8::

func (IP) String 

func (ip IP) String() string

String returns the string form of the IP address ip. It returns one of 4 forms:

  • "<nil>", if ip has length 0
  • dotted decimal ("192.0.2.1"), if ip is an IPv4 or IP4-mapped IPv6 address
  • IPv6 ("2001:db8::1"), if ip is a valid IPv6 address
  • the hexadecimal form of ip, without punctuation, if no other cases apply

func (IP) To16 

func (ip IP) To16() IP

To16 converts the IP address ip to a 16-byte representation. If ip is not an IP address (it is the wrong length), To16 returns nil.

func (IP) To4 

func (ip IP) To4() IP

To4 converts the IPv4 address ip to a 4-byte representation. If ip is not an IPv4 address, To4 returns nil.

func (*IP) UnmarshalText 

func (ip *IP) UnmarshalText(text []byte) error

UnmarshalText implements the encoding.TextUnmarshaler interface. The IP address is expected in a form accepted by ParseIP.

type IPAddr 

type IPAddr struct {
	IP   IP
	Zone string // IPv6 scoped addressing zone
}

IPAddr represents the address of an IP end point.

func ResolveIPAddr 

func ResolveIPAddr(network, address string) (*IPAddr, error)

ResolveIPAddr returns an address of IP end point.

The network must be an IP network name.

If the host in the address parameter is not a literal IP address, ResolveIPAddr resolves the address to an address of IP end point. Otherwise, it parses the address as a literal IP address. The address parameter can use a host name, but this is not recommended, because it will return at most one of the host name's IP addresses.

See func Dial for a description of the network and address parameters.

func (*IPAddr) Network 

func (a *IPAddr) Network() string

Network returns the address's network name, "ip".

func (*IPAddr) String 

func (a *IPAddr) String() string

type IPConn 

type IPConn struct {
	// contains filtered or unexported fields
}

IPConn is the implementation of the Conn and PacketConn interfaces for IP network connections.

func DialIP 

func DialIP(network string, laddr, raddr *IPAddr) (*IPConn, error)

DialIP acts like Dial for IP networks.

The network must be an IP network name; see func Dial for details.

If laddr is nil, a local address is automatically chosen. If the IP field of raddr is nil or an unspecified IP address, the local system is assumed.

func ListenIP 

func ListenIP(network string, laddr *IPAddr) (*IPConn, error)

ListenIP acts like ListenPacket for IP networks.

The network must be an IP network name; see func Dial for details.

If the IP field of laddr is nil or an unspecified IP address, ListenIP listens on all available IP addresses of the local system except multicast IP addresses.

func (*IPConn) Close 

func (c *IPConn) Close() error

Close closes the connection.

func (*IPConn) File 

func (c *IPConn) File() (f *os.File, err error)

File returns a copy of the underlying os.File It is the caller's responsibility to close f when finished. Closing c does not affect f, and closing f does not affect c.

The returned os.File's file descriptor is different from the connection's. Attempting to change properties of the original using this duplicate may or may not have the desired effect.

func (*IPConn) LocalAddr 

func (c *IPConn) LocalAddr() Addr

LocalAddr returns the local network address. The Addr returned is shared by all invocations of LocalAddr, so do not modify it.

func (*IPConn) Read 

func (c *IPConn) Read(b []byte) (int, error)

Read implements the Conn Read method.

func (*IPConn) ReadFrom 

func (c *IPConn) ReadFrom(b []byte) (int, Addr, error)

ReadFrom implements the PacketConn ReadFrom method.

func (*IPConn) ReadFromIP 

func (c *IPConn) ReadFromIP(b []byte) (int, *IPAddr, error)

ReadFromIP acts like ReadFrom but returns an IPAddr.

func (*IPConn) ReadMsgIP 

func (c *IPConn) ReadMsgIP(b, oob []byte) (n, oobn, flags int, addr *IPAddr, err error)

ReadMsgIP reads a message from c, copying the payload into b and the associated out-of-band data into oob. It returns the number of bytes copied into b, the number of bytes copied into oob, the flags that were set on the message and the source address of the message.

The packages golang.org/x/net/ipv4 and golang.org/x/net/ipv6 can be used to manipulate IP-level socket options in oob.

func (*IPConn) RemoteAddr 

func (c *IPConn) RemoteAddr() Addr

RemoteAddr returns the remote network address. The Addr returned is shared by all invocations of RemoteAddr, so do not modify it.

func (*IPConn) SetDeadline 

func (c *IPConn) SetDeadline(t time.Time) error

SetDeadline implements the Conn SetDeadline method.

func (*IPConn) SetReadBuffer 

func (c *IPConn) SetReadBuffer(bytes int) error

SetReadBuffer sets the size of the operating system's receive buffer associated with the connection.

func (*IPConn) SetReadDeadline 

func (c *IPConn) SetReadDeadline(t time.Time) error

SetReadDeadline implements the Conn SetReadDeadline method.

func (*IPConn) SetWriteBuffer 

func (c *IPConn) SetWriteBuffer(bytes int) error

SetWriteBuffer sets the size of the operating system's transmit buffer associated with the connection.

func (*IPConn) SetWriteDeadline 

func (c *IPConn) SetWriteDeadline(t time.Time) error

SetWriteDeadline implements the Conn SetWriteDeadline method.

func (*IPConn) SyscallConn 

func (c *IPConn) SyscallConn() (syscall.RawConn, error)

SyscallConn returns a raw network connection. This implements the syscall.Conn interface.

func (*IPConn) Write 

func (c *IPConn) Write(b []byte) (int, error)

Write implements the Conn Write method.

func (*IPConn) WriteMsgIP 

func (c *IPConn) WriteMsgIP(b, oob []byte, addr *IPAddr) (n, oobn int, err error)

WriteMsgIP writes a message to addr via c, copying the payload from b and the associated out-of-band data from oob. It returns the number of payload and out-of-band bytes written.

The packages golang.org/x/net/ipv4 and golang.org/x/net/ipv6 can be used to manipulate IP-level socket options in oob.

func (*IPConn) WriteTo 

func (c *IPConn) WriteTo(b []byte, addr Addr) (int, error)

WriteTo implements the PacketConn WriteTo method.

func (*IPConn) WriteToIP 

func (c *IPConn) WriteToIP(b []byte, addr *IPAddr) (int, error)

WriteToIP acts like WriteTo but takes an IPAddr.

type IPMask 

type IPMask []byte

An IP mask is an IP address.

func CIDRMask 

func CIDRMask(ones, bits int) IPMask

CIDRMask returns an IPMask consisting of `ones' 1 bits followed by 0s up to a total length of `bits' bits. For a mask of this form, CIDRMask is the inverse of IPMask.Size.

Example 
package main

import (
	"fmt"
	"net"
)

func main() {
	// This mask corresponds to a /31 subnet for IPv4.
	fmt.Println(net.CIDRMask(31, 32))

	// This mask corresponds to a /64 subnet for IPv6.
	fmt.Println(net.CIDRMask(64, 128))

}

Output:

fffffffe
ffffffffffffffff0000000000000000

func IPv4Mask 

func IPv4Mask(a, b, c, d byte) IPMask

IPv4Mask returns the IP mask (in 4-byte form) of the IPv4 mask a.b.c.d.

Example 
package main

import (
	"fmt"
	"net"
)

func main() {
	fmt.Println(net.IPv4Mask(255, 255, 255, 0))

}

Output:

ffffff00

func (IPMask) Size 

func (m IPMask) Size() (ones, bits int)

Size returns the number of leading ones and total bits in the mask. If the mask is not in the canonical form--ones followed by zeros--then Size returns 0, 0.

func (IPMask) String 

func (m IPMask) String() string

String returns the hexadecimal form of m, with no punctuation.

type IPNet 

type IPNet struct {
	IP   IP     // network number
	Mask IPMask // network mask
}

An IPNet represents an IP network.

func (*IPNet) Contains 

func (n *IPNet) Contains(ip IP) bool

Contains reports whether the network includes ip.

func (*IPNet) Network 

func (n *IPNet) Network() string

Network returns the address's network name, "ip+net".

func (*IPNet) String 

func (n *IPNet) String() string

String returns the CIDR notation of n like "192.0.2.1/24" or "2001:db8::/48" as defined in RFC 4632 and RFC 4291. If the mask is not in the canonical form, it returns the string which consists of an IP address, followed by a slash character and a mask expressed as hexadecimal form with no punctuation like "198.51.100.1/c000ff00".

type Interface 

type Interface struct {
	Index        int          // positive integer that starts at one, zero is never used
	MTU          int          // maximum transmission unit
	Name         string       // e.g., "en0", "lo0", "eth0.100"
	HardwareAddr HardwareAddr // IEEE MAC-48, EUI-48 and EUI-64 form
	Flags        Flags        // e.g., FlagUp, FlagLoopback, FlagMulticast
}

Interface represents a mapping between network interface name and index. It also represents network interface facility information.

func InterfaceByIndex 

func InterfaceByIndex(index int) (*Interface, error)

InterfaceByIndex returns the interface specified by index.

On Solaris, it returns one of the logical network interfaces sharing the logical data link; for more precision use InterfaceByName.

func InterfaceByName 

func InterfaceByName(name string) (*Interface, error)

InterfaceByName returns the interface specified by name.

func Interfaces 

func Interfaces() ([]Interface, error)

Interfaces returns a list of the system's network interfaces.

func (*Interface) Addrs 

func (ifi *Interface) Addrs() ([]Addr, error)

Addrs returns a list of unicast interface addresses for a specific interface.

func (*Interface) MulticastAddrs 

func (ifi *Interface) MulticastAddrs() ([]Addr, error)

MulticastAddrs returns a list of multicast, joined group addresses for a specific interface.

type InvalidAddrError 

type InvalidAddrError string

func (InvalidAddrError) Error 

func (e InvalidAddrError) Error() string

func (InvalidAddrError) Temporary 

func (e InvalidAddrError) Temporary() bool

func (InvalidAddrError) Timeout 

func (e InvalidAddrError) Timeout() bool

type ListenConfig 

type ListenConfig struct {
	// If Control is not nil, it is called after creating the network
	// connection but before binding it to the operating system.
	//
	// Network and address parameters passed to Control method are not
	// necessarily the ones passed to Listen. For example, passing "tcp" to
	// Listen will cause the Control function to be called with "tcp4" or "tcp6".
	//
	// 如果Control不为nil，则在创建网络连接之后但将其绑定到操作系统之前将其调用。
	// 传递给 Control 方法的网络和地址参数不一定是传递给 Listen 的参数。 例如，将 "tcp4" 传递给Listen 将导致使用 "tcp4" 或 "tcp6" 调用 Control 函数。
	Control func(network, address string, c syscall.RawConn) error
}

ListenConfig contains options for listening to an address. ListenConfig 包含用于侦听地址的选项 options 。

func (*ListenConfig) Listen 

func (lc *ListenConfig) Listen(ctx context.Context, network, address string) (Listener, error)

Listen announces on the local network address.

See func Listen for a description of the network and address parameters. 监听地址（"tcp", "tcp4", "tcp6", "unix" 或者 "unixpacket"）

func (*ListenConfig) ListenPacket 

func (lc *ListenConfig) ListenPacket(ctx context.Context, network, address string) (PacketConn, error)

ListenPacket announces on the local network address.

See func ListenPacket for a description of the network and address parameters. 监听地址（udp", "udp4", "udp6", "ip", "ip4", "ip6"或者"unixgram"）

type Listener 

type Listener interface {
	// Accept waits for and returns the next connection to the listener.
	Accept() (Conn, error)

	// Close closes the listener.
	// Any blocked Accept operations will be unblocked and return errors.
	Close() error

	// Addr returns the listener's network address.
	Addr() Addr
}

A Listener is a generic network listener for stream-oriented protocols.

Multiple goroutines may invoke methods on a Listener simultaneously.

Example 
package main

import (
	"io"
	"log"
	"net"
)

func main() {
	// Listen on TCP port 2000 on all available unicast and
	// anycast IP addresses of the local system.
	l, err := net.Listen("tcp", ":2000")
	if err != nil {
		log.Fatal(err)
	}
	defer l.Close()
	for {
		// Wait for a connection.
		conn, err := l.Accept()
		if err != nil {
			log.Fatal(err)
		}
		// Handle the connection in a new goroutine.
		// The loop then returns to accepting, so that
		// multiple connections may be served concurrently.
		go func(c net.Conn) {
			// Echo all incoming data.
			io.Copy(c, c)
			// Shut down the connection.
			c.Close()
		}(conn)
	}
}

Output:

func FileListener 

func FileListener(f *os.File) (ln Listener, err error)

FileListener returns a copy of the network listener corresponding to the open file f. It is the caller's responsibility to close ln when finished. Closing ln does not affect f, and closing f does not affect ln.

func Listen 

func Listen(network, address string) (Listener, error)

Listen announces on the local network address.

The network must be "tcp", "tcp4", "tcp6", "unix" or "unixpacket".

For TCP networks, if the host in the address parameter is empty or a literal unspecified IP address, Listen listens on all available unicast and anycast IP addresses of the local system. To only use IPv4, use network "tcp4". The address can use a host name, but this is not recommended, because it will create a listener for at most one of the host's IP addresses. If the port in the address parameter is empty or "0", as in "127.0.0.1:" or "[::1]:0", a port number is automatically chosen. The Addr method of Listener can be used to discover the chosen port.

See func Dial for a description of the network and address parameters.

监听地址（udp", "udp4", "udp6", "ip", "ip4", "ip6"或者"unixgram"）

type MX 

type MX struct {
	Host string
	Pref uint16
}

An MX represents a single DNS MX record.

func LookupMX 

func LookupMX(name string) ([]*MX, error)

LookupMX returns the DNS MX records for the given domain name sorted by preference.

type NS 

type NS struct {
	Host string
}

An NS represents a single DNS NS record.

func LookupNS 

func LookupNS(name string) ([]*NS, error)

LookupNS returns the DNS NS records for the given domain name.

type OpError 

type OpError struct {
	// Op is the operation which caused the error, such as
	// "read" or "write".
	Op string

	// Net is the network type on which this error occurred,
	// such as "tcp" or "udp6".
	Net string

	// For operations involving a remote network connection, like
	// Dial, Read, or Write, Source is the corresponding local
	// network address.
	Source Addr

	// Addr is the network address for which this error occurred.
	// For local operations, like Listen or SetDeadline, Addr is
	// the address of the local endpoint being manipulated.
	// For operations involving a remote network connection, like
	// Dial, Read, or Write, Addr is the remote address of that
	// connection.
	Addr Addr

	// Err is the error that occurred during the operation.
	Err error
}

OpError is the error type usually returned by functions in the net package. It describes the operation, network type, and address of an error.

func (*OpError) Error 

func (e *OpError) Error() string

func (*OpError) Temporary 

func (e *OpError) Temporary() bool

func (*OpError) Timeout 

func (e *OpError) Timeout() bool

type PacketConn 

type PacketConn interface {
	// ReadFrom reads a packet from the connection,
	// copying the payload into p. It returns the number of
	// bytes copied into p and the return address that
	// was on the packet.
	// It returns the number of bytes read (0 <= n <= len(p))
	// and any error encountered. Callers should always process
	// the n > 0 bytes returned before considering the error err.
	// ReadFrom can be made to time out and return
	// an Error with Timeout() == true after a fixed time limit;
	// see SetDeadline and SetReadDeadline.
	ReadFrom(p []byte) (n int, addr Addr, err error)

	// WriteTo writes a packet with payload p to addr.
	// WriteTo can be made to time out and return
	// an Error with Timeout() == true after a fixed time limit;
	// see SetDeadline and SetWriteDeadline.
	// On packet-oriented connections, write timeouts are rare.
	WriteTo(p []byte, addr Addr) (n int, err error)

	// Close closes the connection.
	// Any blocked ReadFrom or WriteTo operations will be unblocked and return errors.
	Close() error

	// LocalAddr returns the local network address.
	LocalAddr() Addr

	// SetDeadline sets the read and write deadlines associated
	// with the connection. It is equivalent to calling both
	// SetReadDeadline and SetWriteDeadline.
	//
	// A deadline is an absolute time after which I/O operations
	// fail with a timeout (see type Error) instead of
	// blocking. The deadline applies to all future and pending
	// I/O, not just the immediately following call to ReadFrom or
	// WriteTo. After a deadline has been exceeded, the connection
	// can be refreshed by setting a deadline in the future.
	//
	// An idle timeout can be implemented by repeatedly extending
	// the deadline after successful ReadFrom or WriteTo calls.
	//
	// A zero value for t means I/O operations will not time out.
	SetDeadline(t time.Time) error

	// SetReadDeadline sets the deadline for future ReadFrom calls
	// and any currently-blocked ReadFrom call.
	// A zero value for t means ReadFrom will not time out.
	SetReadDeadline(t time.Time) error

	// SetWriteDeadline sets the deadline for future WriteTo calls
	// and any currently-blocked WriteTo call.
	// Even if write times out, it may return n > 0, indicating that
	// some of the data was successfully written.
	// A zero value for t means WriteTo will not time out.
	SetWriteDeadline(t time.Time) error
}

PacketConn is a generic packet-oriented network connection.

Multiple goroutines may invoke methods on a PacketConn simultaneously.

func FilePacketConn 

func FilePacketConn(f *os.File) (c PacketConn, err error)

FilePacketConn returns a copy of the packet network connection corresponding to the open file f. It is the caller's responsibility to close f when finished. Closing c does not affect f, and closing f does not affect c.

func ListenPacket 

func ListenPacket(network, address string) (PacketConn, error)

ListenPacket announces on the local network address.

The network must be "udp", "udp4", "udp6", "unixgram", or an IP transport. The IP transports are "ip", "ip4", or "ip6" followed by a colon and a literal protocol number or a protocol name, as in "ip:1" or "ip:icmp".

For UDP and IP networks, if the host in the address parameter is empty or a literal unspecified IP address, ListenPacket listens on all available IP addresses of the local system except multicast IP addresses. To only use IPv4, use network "udp4" or "ip4:proto". The address can use a host name, but this is not recommended, because it will create a listener for at most one of the host's IP addresses. If the port in the address parameter is empty or "0", as in "127.0.0.1:" or "[::1]:0", a port number is automatically chosen. The LocalAddr method of PacketConn can be used to discover the chosen port.

See func Dial for a description of the network and address parameters.

监听地址（udp", "udp4", "udp6", "ip", "ip4", "ip6"或者"unixgram"）

type ParseError 

type ParseError struct {
	// Type is the type of string that was expected, such as
	// "IP address", "CIDR address".
	Type string

	// Text is the malformed text string.
	Text string
}

A ParseError is the error type of literal network address parsers.

func (*ParseError) Error 

func (e *ParseError) Error() string

type Resolver 

type Resolver struct {
	// PreferGo controls whether Go's built-in DNS resolver is preferred
	// on platforms where it's available. It is equivalent to setting
	// GODEBUG=netdns=go, but scoped to just this resolver.
	PreferGo bool

	// StrictErrors controls the behavior of temporary errors
	// (including timeout, socket errors, and SERVFAIL) when using
	// Go's built-in resolver. For a query composed of multiple
	// sub-queries (such as an A+AAAA address lookup, or walking the
	// DNS search list), this option causes such errors to abort the
	// whole query instead of returning a partial result. This is
	// not enabled by default because it may affect compatibility
	// with resolvers that process AAAA queries incorrectly.
	StrictErrors bool

	// Dial optionally specifies an alternate dialer for use by
	// Go's built-in DNS resolver to make TCP and UDP connections
	// to DNS services. The host in the address parameter will
	// always be a literal IP address and not a host name, and the
	// port in the address parameter will be a literal port number
	// and not a service name.
	// If the Conn returned is also a PacketConn, sent and received DNS
	// messages must adhere to RFC 1035 section 4.2.1, "UDP usage".
	// Otherwise, DNS messages transmitted over Conn must adhere
	// to RFC 7766 section 5, "Transport Protocol Selection".
	// If nil, the default dialer is used.
	Dial func(ctx context.Context, network, address string) (Conn, error)
	// contains filtered or unexported fields
}

A Resolver looks up names and numbers.

A nil *Resolver is equivalent to a zero Resolver.

func (*Resolver) LookupAddr 

func (r *Resolver) LookupAddr(ctx context.Context, addr string) (names []string, err error)

LookupAddr performs a reverse lookup for the given address, returning a list of names mapping to that address.

func (*Resolver) LookupCNAME 

func (r *Resolver) LookupCNAME(ctx context.Context, host string) (cname string, err error)

LookupCNAME returns the canonical name for the given host. Callers that do not care about the canonical name can call LookupHost or LookupIP directly; both take care of resolving the canonical name as part of the lookup.

A canonical name is the final name after following zero or more CNAME records. LookupCNAME does not return an error if host does not contain DNS "CNAME" records, as long as host resolves to address records.

func (*Resolver) LookupHost 

func (r *Resolver) LookupHost(ctx context.Context, host string) (addrs []string, err error)

LookupHost looks up the given host using the local resolver. It returns a slice of that host's addresses.

func (*Resolver) LookupIPAddr 

func (r *Resolver) LookupIPAddr(ctx context.Context, host string) ([]IPAddr, error)

LookupIPAddr looks up host using the local resolver. It returns a slice of that host's IPv4 and IPv6 addresses.

func (*Resolver) LookupMX 

func (r *Resolver) LookupMX(ctx context.Context, name string) ([]*MX, error)

LookupMX returns the DNS MX records for the given domain name sorted by preference.

func (*Resolver) LookupNS 

func (r *Resolver) LookupNS(ctx context.Context, name string) ([]*NS, error)

LookupNS returns the DNS NS records for the given domain name.

func (*Resolver) LookupPort 

func (r *Resolver) LookupPort(ctx context.Context, network, service string) (port int, err error)

LookupPort looks up the port for the given network and service. LookupPort 查找给定网络和服务的端口。 如果不是整数，则根据 /etc/services 来处理

func (*Resolver) LookupSRV 

func (r *Resolver) LookupSRV(ctx context.Context, service, proto, name string) (cname string, addrs []*SRV, err error)

LookupSRV tries to resolve an SRV query of the given service, protocol, and domain name. The proto is "tcp" or "udp". The returned records are sorted by priority and randomized by weight within a priority.

LookupSRV constructs the DNS name to look up following RFC 2782. That is, it looks up _service._proto.name. To accommodate services publishing SRV records under non-standard names, if both service and proto are empty strings, LookupSRV looks up name directly.

func (*Resolver) LookupTXT 

func (r *Resolver) LookupTXT(ctx context.Context, name string) ([]string, error)

LookupTXT returns the DNS TXT records for the given domain name.

type SRV 

type SRV struct {
	Target   string
	Port     uint16
	Priority uint16
	Weight   uint16
}

An SRV represents a single DNS SRV record.

func LookupSRV 

func LookupSRV(service, proto, name string) (cname string, addrs []*SRV, err error)

LookupSRV tries to resolve an SRV query of the given service, protocol, and domain name. The proto is "tcp" or "udp". The returned records are sorted by priority and randomized by weight within a priority.

LookupSRV constructs the DNS name to look up following RFC 2782. That is, it looks up _service._proto.name. To accommodate services publishing SRV records under non-standard names, if both service and proto are empty strings, LookupSRV looks up name directly.

type TCPAddr 

type TCPAddr struct {
	IP   IP
	Port int
	Zone string // IPv6 scoped addressing zone
}

TCPAddr represents the address of a TCP end point. TCPAddr TCP 地址

func ResolveTCPAddr 

func ResolveTCPAddr(network, address string) (*TCPAddr, error)

ResolveTCPAddr returns an address of TCP end point.

The network must be a TCP network name.

If the host in the address parameter is not a literal IP address or the port is not a literal port number, ResolveTCPAddr resolves the address to an address of TCP end point. Otherwise, it parses the address as a pair of literal IP address and port number. The address parameter can use a host name, but this is not recommended, because it will return at most one of the host name's IP addresses.

See func Dial for a description of the network and address parameters. ResolveTCPAddr 解析 TCP 地址

func (*TCPAddr) Network 

func (a *TCPAddr) Network() string

Network returns the address's network name, "tcp". Network 返回网络名称

func (*TCPAddr) String 

func (a *TCPAddr) String() string

实现 Stringer 接口

type TCPConn 

type TCPConn struct {
	// contains filtered or unexported fields
}

TCPConn is an implementation of the Conn interface for TCP network connections. TCPConn TCP 网络连接，实现 Conn 接口

func DialTCP 

func DialTCP(network string, laddr, raddr *TCPAddr) (*TCPConn, error)

DialTCP acts like Dial for TCP networks.

The network must be a TCP network name; see func Dial for details.

If laddr is nil, a local address is automatically chosen. If the IP field of raddr is nil or an unspecified IP address, the local system is assumed. DialTCP TCP 拨号

func (*TCPConn) Close 

func (c *TCPConn) Close() error

Close closes the connection.

func (*TCPConn) CloseRead 

func (c *TCPConn) CloseRead() error

CloseRead shuts down the reading side of the TCP connection. Most callers should just use Close. CloseRead 关闭网络读端

func (*TCPConn) CloseWrite 

func (c *TCPConn) CloseWrite() error

CloseWrite shuts down the writing side of the TCP connection. Most callers should just use Close. CloseRead 关闭网络写

func (*TCPConn) File 

func (c *TCPConn) File() (f *os.File, err error)

File returns a copy of the underlying os.File It is the caller's responsibility to close f when finished. Closing c does not affect f, and closing f does not affect c.

The returned os.File's file descriptor is different from the connection's. Attempting to change properties of the original using this duplicate may or may not have the desired effect.

func (*TCPConn) LocalAddr 

func (c *TCPConn) LocalAddr() Addr

LocalAddr returns the local network address. The Addr returned is shared by all invocations of LocalAddr, so do not modify it.

func (*TCPConn) Read 

func (c *TCPConn) Read(b []byte) (int, error)

Read implements the Conn Read method.

func (*TCPConn) ReadFrom 

func (c *TCPConn) ReadFrom(r io.Reader) (int64, error)

ReadFrom implements the io.ReaderFrom ReadFrom method. ReadFrom 实现 io.ReaderFrom 接口

func (*TCPConn) RemoteAddr 

func (c *TCPConn) RemoteAddr() Addr

RemoteAddr returns the remote network address. The Addr returned is shared by all invocations of RemoteAddr, so do not modify it.

func (*TCPConn) SetDeadline 

func (c *TCPConn) SetDeadline(t time.Time) error

SetDeadline implements the Conn SetDeadline method.

func (*TCPConn) SetKeepAlive 

func (c *TCPConn) SetKeepAlive(keepalive bool) error

SetKeepAlive sets whether the operating system should send keepalive messages on the connection. SetKeepAlive 设置网络 keepalive

func (*TCPConn) SetKeepAlivePeriod 

func (c *TCPConn) SetKeepAlivePeriod(d time.Duration) error

SetKeepAlivePeriod sets period between keep alives. SetKeepAlivePeriod 设置网络 keepalive 的时间间隔

func (*TCPConn) SetLinger 

func (c *TCPConn) SetLinger(sec int) error

SetLinger sets the behavior of Close on a connection which still has data waiting to be sent or to be acknowledged.

If sec < 0 (the default), the operating system finishes sending the data in the background.

If sec == 0, the operating system discards any unsent or unacknowledged data.

If sec > 0, the data is sent in the background as with sec < 0. On some operating systems after sec seconds have elapsed any remaining unsent data may be discarded. SetLinger在连接上设置“关闭”的行为，该连接上仍有等待发送或确认的数据。设置 SOCKET 在 CLOSE 时候是否等待缓冲区发送完成 如果 sec < 0（默认值），则操作系统将在后台完成数据发送。 如果sec == 0，则操作系统将丢弃所有未发送或未确认的数据。 如果 sec > 0 ，则与 sec < 0 一样在后台发送数据。在某些操作系统上，经过 sec 秒后，可能会丢弃所有剩余的未发送数据。

func (*TCPConn) SetNoDelay 

func (c *TCPConn) SetNoDelay(noDelay bool) error

SetNoDelay controls whether the operating system should delay packet transmission in hopes of sending fewer packets (Nagle's algorithm). The default is true (no delay), meaning that data is sent as soon as possible after a Write. SetNoDelay 控制操作系统是否应延迟数据包传输，以希望发送更少的数据包（Nagle算法）。 默认值为 true （无延迟），这意味着在写操作之后尽快发送数据。

func (*TCPConn) SetReadBuffer 

func (c *TCPConn) SetReadBuffer(bytes int) error

SetReadBuffer sets the size of the operating system's receive buffer associated with the connection.

func (*TCPConn) SetReadDeadline 

func (c *TCPConn) SetReadDeadline(t time.Time) error

SetReadDeadline implements the Conn SetReadDeadline method.

func (*TCPConn) SetWriteBuffer 

func (c *TCPConn) SetWriteBuffer(bytes int) error

SetWriteBuffer sets the size of the operating system's transmit buffer associated with the connection.

func (*TCPConn) SetWriteDeadline 

func (c *TCPConn) SetWriteDeadline(t time.Time) error

SetWriteDeadline implements the Conn SetWriteDeadline method.

func (*TCPConn) SyscallConn 

func (c *TCPConn) SyscallConn() (syscall.RawConn, error)

SyscallConn returns a raw network connection. This implements the syscall.Conn interface. SyscallConn 返回原始网络连接。 这实现了syscall.Conn 接口。

func (*TCPConn) Write 

func (c *TCPConn) Write(b []byte) (int, error)

Write implements the Conn Write method.

type TCPListener 

type TCPListener struct {
	// contains filtered or unexported fields
}

TCPListener is a TCP network listener. Clients should typically use variables of type Listener instead of assuming TCP. TCP 监听器

func ListenTCP 

func ListenTCP(network string, laddr *TCPAddr) (*TCPListener, error)

ListenTCP acts like Listen for TCP networks.

The network must be a TCP network name; see func Dial for details.

If the IP field of laddr is nil or an unspecified IP address, ListenTCP listens on all available unicast and anycast IP addresses of the local system. If the Port field of laddr is 0, a port number is automatically chosen. 监听 TCP

func (*TCPListener) Accept 

func (l *TCPListener) Accept() (Conn, error)

Accept implements the Accept method in the Listener interface; it waits for the next call and returns a generic Conn. Accept 接受连接，实现 Listener 接口

func (*TCPListener) AcceptTCP 

func (l *TCPListener) AcceptTCP() (*TCPConn, error)

AcceptTCP accepts the next incoming call and returns the new connection. AcceptTCP 接受连接

func (*TCPListener) Addr 

func (l *TCPListener) Addr() Addr

Addr returns the listener's network address, a *TCPAddr. The Addr returned is shared by all invocations of Addr, so do not modify it. Addr 返回网路地址

func (*TCPListener) Close 

func (l *TCPListener) Close() error

Close stops listening on the TCP address. Already Accepted connections are not closed. CloseRead 关闭网络连接

func (*TCPListener) File 

func (l *TCPListener) File() (f *os.File, err error)

File returns a copy of the underlying os.File. It is the caller's responsibility to close f when finished. Closing l does not affect f, and closing f does not affect l.

The returned os.File's file descriptor is different from the connection's. Attempting to change properties of the original using this duplicate may or may not have the desired effect. 返回基于 os.File 的副本， 由调用者负责关闭 f 。

func (*TCPListener) SetDeadline 

func (l *TCPListener) SetDeadline(t time.Time) error

SetDeadline sets the deadline associated with the listener. A zero time value disables the deadline. 设置 deadline

func (*TCPListener) SyscallConn 

func (l *TCPListener) SyscallConn() (syscall.RawConn, error)

SyscallConn returns a raw network connection. This implements the syscall.Conn interface.

The returned RawConn only supports calling Control. Read and Write return an error. SyscallConn 返回原始网络连接。 这实现了syscall.Conn 接口。

type UDPAddr 

type UDPAddr struct {
	IP   IP
	Port int
	Zone string // IPv6 scoped addressing zone
}

UDPAddr represents the address of a UDP end point.

func ResolveUDPAddr 

func ResolveUDPAddr(network, address string) (*UDPAddr, error)

ResolveUDPAddr returns an address of UDP end point.

The network must be a UDP network name.

If the host in the address parameter is not a literal IP address or the port is not a literal port number, ResolveUDPAddr resolves the address to an address of UDP end point. Otherwise, it parses the address as a pair of literal IP address and port number. The address parameter can use a host name, but this is not recommended, because it will return at most one of the host name's IP addresses.

See func Dial for a description of the network and address parameters.

func (*UDPAddr) Network 

func (a *UDPAddr) Network() string

Network returns the address's network name, "udp".

func (*UDPAddr) String 

func (a *UDPAddr) String() string

type UDPConn 

type UDPConn struct {
	// contains filtered or unexported fields
}

UDPConn is the implementation of the Conn and PacketConn interfaces for UDP network connections.

func DialUDP 

func DialUDP(network string, laddr, raddr *UDPAddr) (*UDPConn, error)

DialUDP acts like Dial for UDP networks.

The network must be a UDP network name; see func Dial for details.

If laddr is nil, a local address is automatically chosen. If the IP field of raddr is nil or an unspecified IP address, the local system is assumed.

func ListenMulticastUDP 

func ListenMulticastUDP(network string, ifi *Interface, gaddr *UDPAddr) (*UDPConn, error)

ListenMulticastUDP acts like ListenPacket for UDP networks but takes a group address on a specific network interface.

The network must be a UDP network name; see func Dial for details.

ListenMulticastUDP listens on all available IP addresses of the local system including the group, multicast IP address. If ifi is nil, ListenMulticastUDP uses the system-assigned multicast interface, although this is not recommended because the assignment depends on platforms and sometimes it might require routing configuration. If the Port field of gaddr is 0, a port number is automatically chosen.

ListenMulticastUDP is just for convenience of simple, small applications. There are golang.org/x/net/ipv4 and golang.org/x/net/ipv6 packages for general purpose uses.

func ListenUDP 

func ListenUDP(network string, laddr *UDPAddr) (*UDPConn, error)

ListenUDP acts like ListenPacket for UDP networks.

The network must be a UDP network name; see func Dial for details.

If the IP field of laddr is nil or an unspecified IP address, ListenUDP listens on all available IP addresses of the local system except multicast IP addresses. If the Port field of laddr is 0, a port number is automatically chosen.

func (*UDPConn) Close 

func (c *UDPConn) Close() error

Close closes the connection.

func (*UDPConn) File 

func (c *UDPConn) File() (f *os.File, err error)

File returns a copy of the underlying os.File It is the caller's responsibility to close f when finished. Closing c does not affect f, and closing f does not affect c.

The returned os.File's file descriptor is different from the connection's. Attempting to change properties of the original using this duplicate may or may not have the desired effect.

func (*UDPConn) LocalAddr 

func (c *UDPConn) LocalAddr() Addr

LocalAddr returns the local network address. The Addr returned is shared by all invocations of LocalAddr, so do not modify it.

func (*UDPConn) Read 

func (c *UDPConn) Read(b []byte) (int, error)

Read implements the Conn Read method.

func (*UDPConn) ReadFrom 

func (c *UDPConn) ReadFrom(b []byte) (int, Addr, error)

ReadFrom implements the PacketConn ReadFrom method.

func (*UDPConn) ReadFromUDP 

func (c *UDPConn) ReadFromUDP(b []byte) (int, *UDPAddr, error)

ReadFromUDP acts like ReadFrom but returns a UDPAddr.

func (*UDPConn) ReadMsgUDP 

func (c *UDPConn) ReadMsgUDP(b, oob []byte) (n, oobn, flags int, addr *UDPAddr, err error)

ReadMsgUDP reads a message from c, copying the payload into b and the associated out-of-band data into oob. It returns the number of bytes copied into b, the number of bytes copied into oob, the flags that were set on the message and the source address of the message.

The packages golang.org/x/net/ipv4 and golang.org/x/net/ipv6 can be used to manipulate IP-level socket options in oob.

func (*UDPConn) RemoteAddr 

func (c *UDPConn) RemoteAddr() Addr

RemoteAddr returns the remote network address. The Addr returned is shared by all invocations of RemoteAddr, so do not modify it.

func (*UDPConn) SetDeadline 

func (c *UDPConn) SetDeadline(t time.Time) error

SetDeadline implements the Conn SetDeadline method.

func (*UDPConn) SetReadBuffer 

func (c *UDPConn) SetReadBuffer(bytes int) error

SetReadBuffer sets the size of the operating system's receive buffer associated with the connection.

func (*UDPConn) SetReadDeadline 

func (c *UDPConn) SetReadDeadline(t time.Time) error

SetReadDeadline implements the Conn SetReadDeadline method.

func (*UDPConn) SetWriteBuffer 

func (c *UDPConn) SetWriteBuffer(bytes int) error

SetWriteBuffer sets the size of the operating system's transmit buffer associated with the connection.

func (*UDPConn) SetWriteDeadline 

func (c *UDPConn) SetWriteDeadline(t time.Time) error

SetWriteDeadline implements the Conn SetWriteDeadline method.

func (*UDPConn) SyscallConn 

func (c *UDPConn) SyscallConn() (syscall.RawConn, error)

SyscallConn returns a raw network connection. This implements the syscall.Conn interface.

func (*UDPConn) Write 

func (c *UDPConn) Write(b []byte) (int, error)

Write implements the Conn Write method.

func (*UDPConn) WriteMsgUDP 

func (c *UDPConn) WriteMsgUDP(b, oob []byte, addr *UDPAddr) (n, oobn int, err error)

WriteMsgUDP writes a message to addr via c if c isn't connected, or to c's remote address if c is connected (in which case addr must be nil). The payload is copied from b and the associated out-of-band data is copied from oob. It returns the number of payload and out-of-band bytes written.

The packages golang.org/x/net/ipv4 and golang.org/x/net/ipv6 can be used to manipulate IP-level socket options in oob.

func (*UDPConn) WriteTo 

func (c *UDPConn) WriteTo(b []byte, addr Addr) (int, error)

WriteTo implements the PacketConn WriteTo method.

Example 
package main

import (
	"log"
	"net"
)

func main() {
	// Unlike Dial, ListenPacket creates a connection without any
	// association with peers.
	conn, err := net.ListenPacket("udp", ":0")
	if err != nil {
		log.Fatal(err)
	}
	defer conn.Close()

	dst, err := net.ResolveUDPAddr("udp", "192.0.2.1:2000")
	if err != nil {
		log.Fatal(err)
	}

	// The connection can write data to the desired address.
	_, err = conn.WriteTo([]byte("data"), dst)
	if err != nil {
		log.Fatal(err)
	}
}

Output:

func (*UDPConn) WriteToUDP 

func (c *UDPConn) WriteToUDP(b []byte, addr *UDPAddr) (int, error)

WriteToUDP acts like WriteTo but takes a UDPAddr.

type UnixAddr 

type UnixAddr struct {
	Name string
	Net  string
}

UnixAddr represents the address of a Unix domain socket end point.

func ResolveUnixAddr 

func ResolveUnixAddr(network, address string) (*UnixAddr, error)

ResolveUnixAddr returns an address of Unix domain socket end point.

The network must be a Unix network name.

See func Dial for a description of the network and address parameters. ResolveUnixAddr 返回 Unix domain socket 地址

func (*UnixAddr) Network 

func (a *UnixAddr) Network() string

Network returns the address's network name, "unix", "unixgram" or "unixpacket".

func (*UnixAddr) String 

func (a *UnixAddr) String() string

type UnixConn 

type UnixConn struct {
	// contains filtered or unexported fields
}

UnixConn is an implementation of the Conn interface for connections to Unix domain sockets.

func DialUnix 

func DialUnix(network string, laddr, raddr *UnixAddr) (*UnixConn, error)

DialUnix acts like Dial for Unix networks.

The network must be a Unix network name; see func Dial for details.

If laddr is non-nil, it is used as the local address for the connection.

func ListenUnixgram 

func ListenUnixgram(network string, laddr *UnixAddr) (*UnixConn, error)

ListenUnixgram acts like ListenPacket for Unix networks.

The network must be "unixgram".

func (*UnixConn) Close 

func (c *UnixConn) Close() error

Close closes the connection.

func (*UnixConn) CloseRead 

func (c *UnixConn) CloseRead() error

CloseRead shuts down the reading side of the Unix domain connection. Most callers should just use Close.

func (*UnixConn) CloseWrite 

func (c *UnixConn) CloseWrite() error

CloseWrite shuts down the writing side of the Unix domain connection. Most callers should just use Close.

func (*UnixConn) File 

func (c *UnixConn) File() (f *os.File, err error)

File returns a copy of the underlying os.File It is the caller's responsibility to close f when finished. Closing c does not affect f, and closing f does not affect c.

The returned os.File's file descriptor is different from the connection's. Attempting to change properties of the original using this duplicate may or may not have the desired effect.

func (*UnixConn) LocalAddr 

func (c *UnixConn) LocalAddr() Addr

LocalAddr returns the local network address. The Addr returned is shared by all invocations of LocalAddr, so do not modify it.

func (*UnixConn) Read 

func (c *UnixConn) Read(b []byte) (int, error)

Read implements the Conn Read method.

func (*UnixConn) ReadFrom 

func (c *UnixConn) ReadFrom(b []byte) (int, Addr, error)

ReadFrom implements the PacketConn ReadFrom method.

func (*UnixConn) ReadFromUnix 

func (c *UnixConn) ReadFromUnix(b []byte) (int, *UnixAddr, error)

ReadFromUnix acts like ReadFrom but returns a UnixAddr.

func (*UnixConn) ReadMsgUnix 

func (c *UnixConn) ReadMsgUnix(b, oob []byte) (n, oobn, flags int, addr *UnixAddr, err error)

ReadMsgUnix reads a message from c, copying the payload into b and the associated out-of-band data into oob. It returns the number of bytes copied into b, the number of bytes copied into oob, the flags that were set on the message and the source address of the message.

Note that if len(b) == 0 and len(oob) > 0, this function will still read (and discard) 1 byte from the connection.

func (*UnixConn) RemoteAddr 

func (c *UnixConn) RemoteAddr() Addr

RemoteAddr returns the remote network address. The Addr returned is shared by all invocations of RemoteAddr, so do not modify it.

func (*UnixConn) SetDeadline 

func (c *UnixConn) SetDeadline(t time.Time) error

SetDeadline implements the Conn SetDeadline method.

func (*UnixConn) SetReadBuffer 

func (c *UnixConn) SetReadBuffer(bytes int) error

SetReadBuffer sets the size of the operating system's receive buffer associated with the connection.

func (*UnixConn) SetReadDeadline 

func (c *UnixConn) SetReadDeadline(t time.Time) error

SetReadDeadline implements the Conn SetReadDeadline method.

func (*UnixConn) SetWriteBuffer 

func (c *UnixConn) SetWriteBuffer(bytes int) error

SetWriteBuffer sets the size of the operating system's transmit buffer associated with the connection.

func (*UnixConn) SetWriteDeadline 

func (c *UnixConn) SetWriteDeadline(t time.Time) error

SetWriteDeadline implements the Conn SetWriteDeadline method.

func (*UnixConn) SyscallConn 

func (c *UnixConn) SyscallConn() (syscall.RawConn, error)

SyscallConn returns a raw network connection. This implements the syscall.Conn interface.

func (*UnixConn) Write 

func (c *UnixConn) Write(b []byte) (int, error)

Write implements the Conn Write method.

func (*UnixConn) WriteMsgUnix 

func (c *UnixConn) WriteMsgUnix(b, oob []byte, addr *UnixAddr) (n, oobn int, err error)

WriteMsgUnix writes a message to addr via c, copying the payload from b and the associated out-of-band data from oob. It returns the number of payload and out-of-band bytes written.

Note that if len(b) == 0 and len(oob) > 0, this function will still write 1 byte to the connection.

func (*UnixConn) WriteTo 

func (c *UnixConn) WriteTo(b []byte, addr Addr) (int, error)

WriteTo implements the PacketConn WriteTo method.

func (*UnixConn) WriteToUnix 

func (c *UnixConn) WriteToUnix(b []byte, addr *UnixAddr) (int, error)

WriteToUnix acts like WriteTo but takes a UnixAddr.

type UnixListener 

type UnixListener struct {
	// contains filtered or unexported fields
}

UnixListener is a Unix domain socket listener. Clients should typically use variables of type Listener instead of assuming Unix domain sockets.

func ListenUnix 

func ListenUnix(network string, laddr *UnixAddr) (*UnixListener, error)

ListenUnix acts like Listen for Unix networks.

The network must be "unix" or "unixpacket".

func (*UnixListener) Accept 

func (l *UnixListener) Accept() (Conn, error)

Accept implements the Accept method in the Listener interface. Returned connections will be of type *UnixConn.

func (*UnixListener) AcceptUnix 

func (l *UnixListener) AcceptUnix() (*UnixConn, error)

AcceptUnix accepts the next incoming call and returns the new connection.

func (*UnixListener) Addr 

func (l *UnixListener) Addr() Addr

Addr returns the listener's network address. The Addr returned is shared by all invocations of Addr, so do not modify it.

func (*UnixListener) Close 

func (l *UnixListener) Close() error

Close stops listening on the Unix address. Already accepted connections are not closed.

func (*UnixListener) File 

func (l *UnixListener) File() (f *os.File, err error)

File returns a copy of the underlying os.File. It is the caller's responsibility to close f when finished. Closing l does not affect f, and closing f does not affect l.

The returned os.File's file descriptor is different from the connection's. Attempting to change properties of the original using this duplicate may or may not have the desired effect.

func (*UnixListener) SetDeadline 

func (l *UnixListener) SetDeadline(t time.Time) error

SetDeadline sets the deadline associated with the listener. A zero time value disables the deadline.

func (*UnixListener) SetUnlinkOnClose 

func (l *UnixListener) SetUnlinkOnClose(unlink bool)

SetUnlinkOnClose sets whether the underlying socket file should be removed from the file system when the listener is closed.

The default behavior is to unlink the socket file only when package net created it. That is, when the listener and the underlying socket file were created by a call to Listen or ListenUnix, then by default closing the listener will remove the socket file. but if the listener was created by a call to FileListener to use an already existing socket file, then by default closing the listener will not remove the socket file.

func (*UnixListener) SyscallConn 

func (l *UnixListener) SyscallConn() (syscall.RawConn, error)

SyscallConn returns a raw network connection. This implements the syscall.Conn interface.

The returned RawConn only supports calling Control. Read and Write return an error.

type UnknownNetworkError 

type UnknownNetworkError string

func (UnknownNetworkError) Error 

func (e UnknownNetworkError) Error() string

func (UnknownNetworkError) Temporary 

func (e UnknownNetworkError) Temporary() bool

func (UnknownNetworkError) Timeout 

func (e UnknownNetworkError) Timeout() bool

Notes

Bugs

  • On JS, NaCl and Windows, the FileConn, FileListener and FilePacketConn functions are not implemented.

  • On JS and NaCl, methods and functions related to Interface are not implemented.

  • On AIX, DragonFly BSD, NetBSD, OpenBSD, Plan 9 and Solaris, the MulticastAddrs method of Interface is not implemented.

  • On every POSIX platform, reads from the "ip4" network using the ReadFrom or ReadFromIP method might not return a complete IPv4 packet, including its header, even if there is space available. This can occur even in cases where Read or ReadMsgIP could return a complete packet. For this reason, it is recommended that you do not use these methods if it is important to receive a full packet.

    The Go 1 compatibility guidelines make it impossible for us to change the behavior of these methods; use Read or ReadMsgIP instead.

  • On JS, NaCl and Plan 9, methods and functions related to IPConn are not implemented.

  • On Windows, the File method of IPConn is not implemented.

  • On DragonFly BSD and OpenBSD, listening on the "tcp" and "udp" networks does not listen for both IPv4 and IPv6 connections. This is due to the fact that IPv4 traffic will not be routed to an IPv6 socket - two separate sockets are required if both address families are to be supported. See inet6(4) for details.

  • On Windows, the Write method of syscall.RawConn does not integrate with the runtime's network poller. It cannot wait for the connection to become writeable, and does not respect deadlines. If the user-provided callback returns false, the Write method will fail immediately.

  • On JS, NaCl and Plan 9, the Control, Read and Write methods of syscall.RawConn are not implemented.

  • On JS, NaCl and Windows, the File method of TCPConn and TCPListener is not implemented.

  • On NaCl and Plan 9, the ReadMsgUDP and WriteMsgUDP methods of UDPConn are not implemented.

  • On Windows, the File method of UDPConn is not implemented.

  • On NaCl, the ListenMulticastUDP function is not implemented.

  • On JS, methods and functions related to UDPConn are not implemented.

  • On JS, NaCl and Plan 9, methods and functions related to UnixConn and UnixListener are not implemented.

  • On Windows, methods and functions related to UnixConn and UnixListener don't work for "unixgram" and "unixpacket".

Source Files

View all Source files

Directories

Path Synopsis
Package http provides HTTP client and server implementations.
 Package http provides HTTP client and server implementations.
cgi
Package cgi implements CGI (Common Gateway Interface) as specified in RFC 3875.
 Package cgi implements CGI (Common Gateway Interface) as specified in RFC 3875.
cookiejar
Package cookiejar implements an in-memory RFC 6265-compliant http.CookieJar.
 Package cookiejar implements an in-memory RFC 6265-compliant http.CookieJar.
fcgi
Package fcgi implements the FastCGI protocol.
 Package fcgi implements the FastCGI protocol.
httptest
Package httptest provides utilities for HTTP testing.
 Package httptest provides utilities for HTTP testing.
httptrace
Package httptrace provides mechanisms to trace the events within HTTP client requests.
 Package httptrace provides mechanisms to trace the events within HTTP client requests.
httputil
Package httputil provides HTTP utility functions, complementing the more common ones in the net/http package.
 Package httputil provides HTTP utility functions, complementing the more common ones in the net/http package.
internal
Package internal contains HTTP internals shared by net/http and net/http/httputil.
 Package internal contains HTTP internals shared by net/http and net/http/httputil.
pprof
Package pprof serves via its HTTP server runtime profiling data in the format expected by the pprof visualization tool.
 Package pprof serves via its HTTP server runtime profiling data in the format expected by the pprof visualization tool.
internal
socktest
Package socktest provides utilities for socket testing.
 Package socktest provides utilities for socket testing.
Package mail implements parsing of mail messages.
 Package mail implements parsing of mail messages.
rpc
Package rpc provides access to the exported methods of an object across a network or other I/O connection.
 Package rpc provides access to the exported methods of an object across a network or other I/O connection.
jsonrpc
Package jsonrpc implements a JSON-RPC 1.0 ClientCodec and ServerCodec for the rpc package.
 Package jsonrpc implements a JSON-RPC 1.0 ClientCodec and ServerCodec for the rpc package.
Package smtp implements the Simple Mail Transfer Protocol as defined in RFC 5321.
 Package smtp implements the Simple Mail Transfer Protocol as defined in RFC 5321.
Package textproto implements generic support for text-based request/response protocols in the style of HTTP, NNTP, and SMTP.
 Package textproto implements generic support for text-based request/response protocols in the style of HTTP, NNTP, and SMTP.
Package url parses URLs and implements query escaping.
 Package url parses URLs and implements query escaping.

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.