keeper

package
v6.7.1 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Dec 10, 2024 License: Apache-2.0 Imports: 31 Imported by: 0

Documentation

Index

Constants

View Source 
const MaxSpotPriceAge = 180 // 180 seconds = 3 minutes

TODO: parameterize this

Variables

This section is empty.

Functions

func ApproxExponential 

func ApproxExponential(x sdk.Dec) sdk.Dec

ApproxExponential is the taylor series expansion of e^x centered around x=0, truncated to the cubic term. It can be used with great accuracy to determine e^x when x is very small. Note that e^x = 1 + x/1! + x^2/2! + x^3 / 3! + ...

func BorrowAPYInvariant 

func BorrowAPYInvariant(k Keeper) sdk.Invariant

BorrowAPYInvariant checks that Borrow APY have all positive values

func ComputeCloseFactor 

func ComputeCloseFactor(
	borrowedValue,
	collateralValue,
	liquidationThreshold,
	smallLiquidationSize,
	minimumCloseFactor,
	completeLiquidationThreshold sdk.Dec,
) (closeFactor sdk.Dec)

ComputeCloseFactor derives the maximum portion of a borrower's current borrowedValue that can currently be repaid in a single liquidate transaction.

closeFactor scales linearly between minimumCloseFactor and 1.0, reaching its maximum when borrowedValue has reached a critical value between liquidationThreshold to collateralValue. This critical value is defined as: 

B = critical borrowedValue
C = collateralValue
L = liquidationThreshold
CLT = completeLiquidationThreshold

B = L + (C-L) * CLT

closeFactor is zero for borrowers that are not eligible for liquidation, i.e. borrowedValue < liquidationThreshold

Finally, if borrowedValue is less than smallLiquidationSize, closeFactor will always be 1 as long as the borrower is eligible for liquidation.

func ComputeLiquidation 

func ComputeLiquidation(
	availableRepay,
	availableCollateral,
	availableReward sdkmath.Int,
	priceRatio,
	uTokenExchangeRate,
	liquidationIncentive sdk.Dec,
	leverageLiquidate bool,
) (tokenRepay sdkmath.Int, collateralBurn sdkmath.Int, tokenReward sdkmath.Int)

ComputeLiquidation takes the conditions preceding a liquidation and outputs the amounts of base token that should be repaid, collateral uToken burned, and reward token allocated as a result of the transaction, after accounting for limiting factors with as little rounding as possible. Inputs are as follows: - availableRepay: The lowest (in repay denom) of either liquidator balance, max repayment, or borrowed amount. - availableCollateral: The amount of the reward uToken denom which borrower has as collateral - availableReward: The amount of unreserved reward tokens in the module balance - priceRatio: The ratio of repayPrice / rewardPrice, which is used when computing rewards - uTokenExchangeRate: The uToken exchange rate from collateral uToken denom to reward base denom - liquidationIncentive: The liquidation incentive of the token reward denomination - leverageLiquidate: whether liquidation is leveraged (in which case it can disregard availableReward)

func ExchangeRatesInvariant 

func ExchangeRatesInvariant(k Keeper) sdk.Invariant

ExchangeRatesInvariant checks that all denoms have an uToken exchange rate >= 1

func InefficientBorrowAmountInvariant 

func InefficientBorrowAmountInvariant(k Keeper) sdk.Invariant

InefficientBorrowAmountInvariant checks that borrow amounts have all positive values This runs in O(N) time where N is the number of participating addresses, so it should not be enabled in production.

func InefficientCollateralAmountInvariant 

func InefficientCollateralAmountInvariant(k Keeper) sdk.Invariant

InefficientCollateralAmountInvariant checks that collateral amounts have all positive values. This runs in O(N) time where N is the number of participating addresses, so it should not be enabled in production.

func InterestScalarsInvariant 

func InterestScalarsInvariant(k Keeper) sdk.Invariant

InterestScalarsInvariant checks that all denoms have an interest scalar >= 1

func Interpolate 

func Interpolate(x, xMin, yMin, xMax, yMax sdk.Dec) sdk.Dec

Interpolate takes a line defined by two points (xMin, yMin) and (xMax, yMax), then finds the y-value of the point on that line for an input x-value. It will return yMin if xMin = xMax (i.e. a vertical line). While this function is intended for interpolation (xMin < x < xMax), it works correctly even when x is outside that range or when xMin > xMax.

func NewMsgServerImpl 

func NewMsgServerImpl(keeper Keeper) types.MsgServer

NewMsgServerImpl returns an implementation of MsgServer for the x/leverage module.

func RegisterInvariants 

func RegisterInvariants(ir sdk.InvariantRegistry, k Keeper)

RegisterInvariants registers the leverage module invariants

func ReserveAmountInvariant 

func ReserveAmountInvariant(k Keeper) sdk.Invariant

ReserveAmountInvariant checks that reserve amounts have non-negative balances

func SupplyAPYInvariant 

func SupplyAPYInvariant(k Keeper) sdk.Invariant

SupplyAPYInvariant checks that Supply APY have all positive values

Types

type Keeper 

type Keeper struct {
	// contains filtered or unexported fields
}

func NewKeeper 

func NewKeeper(
	cdc codec.BinaryCodec,
	storeKey storetypes.StoreKey,
	akStoreKey storetypes.StoreKey,
	b types.BankKeeper,
	ak authkeeper.AccountKeeper,
	o types.OracleKeeper,
	ugov ugov.EmergencyGroupBuilder,
	enableLiquidatorQuery bool,
	rewardsAuction sdk.AccAddress,
) Keeper

func (Keeper) AccrueAllInterest 

func (k Keeper) AccrueAllInterest(ctx sdk.Context) error

AccrueAllInterest is called by EndBlock to update borrow positions. It accrues interest on all open borrows, increase reserves, funds oracle rewards, and sets LastInterestTime to BlockTime.

func (Keeper) AvailableLiquidity 

func (k Keeper) AvailableLiquidity(ctx sdk.Context, denom string) sdkmath.Int

AvailableLiquidity gets the unreserved module balance of a given token.

func (Keeper) Borrow 

func (k Keeper) Borrow(ctx sdk.Context, borrowerAddr sdk.AccAddress, borrow sdk.Coin) error

Borrow attempts to borrow tokens from the leverage module account using collateral uTokens. If asset type is invalid, or module balance is insufficient, we return an error. This function does NOT check that a borrower remains under their borrow limit or that collateral liquidity remains healthy - those assertions have been moved to MsgServer.

func (Keeper) CalculateCollateralValue 

func (k Keeper) CalculateCollateralValue(ctx sdk.Context, collateral sdk.Coins, mode types.PriceMode) (sdk.Dec, error)

CalculateCollateralValue uses the price oracle to determine the value (in USD) provided by collateral sdk.Coins, using each token's uToken exchange rate. An error is returned if any input coins are not uTokens or if value calculation fails.

func (Keeper) CleanTokenRegistry 

func (k Keeper) CleanTokenRegistry(ctx sdk.Context) error

CleanTokenRegistry deletes all blacklisted tokens in the leverage registry whose uToken supplies are zero. Called automatically on registry update.

func (Keeper) CollateralLiquidity 

func (k Keeper) CollateralLiquidity(ctx sdk.Context, denom string) sdk.Dec

CollateralLiquidity calculates the current collateral liquidity of a token denom, which is defined as the token's liquidity, divided by the base token equivalent of associated uToken's total collateral. Ranges from 0 to 1.0

func (Keeper) Collateralize 

func (k Keeper) Collateralize(ctx sdk.Context, borrowerAddr sdk.AccAddress, uToken sdk.Coin) error

Collateralize enables selected uTokens for use as collateral by a single borrower. This function does NOT check that collateral share and collateral liquidity remain healthy. Those assertions have been moved to MsgServer.

func (Keeper) Decollateralize 

func (k Keeper) Decollateralize(ctx sdk.Context, borrowerAddr sdk.AccAddress, uToken sdk.Coin) error

Decollateralize disables selected uTokens for use as collateral by a single borrower. This function does NOT check that a borrower remains under their borrow limit. That assertion has been moved to MsgServer.

func (Keeper) DeriveBorrowAPY 

func (k Keeper) DeriveBorrowAPY(ctx sdk.Context, denom string) sdk.Dec

DeriveBorrowAPY derives the current borrow interest rate on a token denom using its supply utilization and token-specific params. Returns zero on invalid asset.

func (Keeper) DeriveExchangeRate 

func (k Keeper) DeriveExchangeRate(ctx sdk.Context, denom string) sdk.Dec

DeriveExchangeRate calculated the token:uToken exchange rate of a base token denom.

func (Keeper) DeriveSupplyAPY 

func (k Keeper) DeriveSupplyAPY(ctx sdk.Context, denom string) sdk.Dec

DeriveSupplyAPY derives the current supply interest rate on a token denom using its supply utilization and borrow APY. Returns zero on invalid asset.

func (Keeper) DonateCollateral 

func (k Keeper) DonateCollateral(ctx sdk.Context, fromAddr sdk.AccAddress, uToken sdk.Coin) error

DonateCollateral burns some collateral uTokens already present in the module, then adds their equivalent amount in tokens reserves. Currently, this is only used as the penalty for incentive module's MsgEmergencyUnbond.

func (Keeper) ExportGenesis 

func (k Keeper) ExportGenesis(ctx sdk.Context) *types.GenesisState

ExportGenesis returns the x/leverage module's exported genesis state.

func (Keeper) GetAccountPosition 

func (k Keeper) GetAccountPosition(ctx sdk.Context, addr sdk.AccAddress, isForLiquidation bool,
) (types.AccountPosition, error)

GetAccountPosition creates and sorts an accountPosition for an address, using information from the keeper's special asset pairs and token collateral weights as well as oracle prices. Will treat collateral with missing prices as zero-valued, but will error on missing borrow prices. On computing liquidation threshold, will treat borrows with missing prices as zero and error on missing collateral prices instead, as well as using spot prices instead of both spot and historic. Also stores all token settings and any special asset pairs that could apply to the account's collateral.

func (Keeper) GetAllRegisteredTokens 

func (k Keeper) GetAllRegisteredTokens(ctx sdk.Context) []types.Token

GetAllRegisteredTokens returns all the registered tokens from the x/leverage module's KVStore.

func (Keeper) GetAllReserves 

func (k Keeper) GetAllReserves(ctx sdk.Context) sdk.Coins

GetAllReserves returns all reserves.

func (Keeper) GetAllSpecialAssetPairs 

func (k Keeper) GetAllSpecialAssetPairs(ctx sdk.Context) []types.SpecialAssetPair

GetAllSpecialAssetPairs returns all the special asset pairs from the x/leverage module's KVStore.

func (Keeper) GetAllSupplied 

func (k Keeper) GetAllSupplied(ctx sdk.Context, supplierAddr sdk.AccAddress) (sdk.Coins, error)

GetAllSupplied returns the total tokens supplied by a user, including any interest accrued.

func (Keeper) GetAllTotalCollateral 

func (k Keeper) GetAllTotalCollateral(ctx sdk.Context) sdk.Coins

GetAllTotalCollateral returns total collateral across all uTokens.

func (Keeper) GetAllUTokenSupply 

func (k Keeper) GetAllUTokenSupply(ctx sdk.Context) sdk.Coins

GetAllUTokenSupply returns total supply of all uToken denoms.

func (Keeper) GetBorrow 

func (k Keeper) GetBorrow(ctx sdk.Context, borrowerAddr sdk.AccAddress, denom string) sdk.Coin

GetBorrow returns an sdk.Coin representing how much of a given denom a borrower currently owes.

func (Keeper) GetBorrowerBorrows 

func (k Keeper) GetBorrowerBorrows(ctx sdk.Context, borrowerAddr sdk.AccAddress) sdk.Coins

GetBorrowerBorrows returns an sdk.Coins object containing all open borrows associated with an address.

func (Keeper) GetBorrowerCollateral 

func (k Keeper) GetBorrowerCollateral(ctx sdk.Context, borrowerAddr sdk.AccAddress) sdk.Coins

GetBorrowerCollateral returns an sdk.Coins containing all of a borrower's collateral.

func (Keeper) GetCollateral 

func (k Keeper) GetCollateral(ctx sdk.Context, borrowerAddr sdk.AccAddress, denom string) sdk.Coin

GetCollateral returns an sdk.Coin representing how much of a given denom the x/leverage module account currently holds as collateral for a given borrower.

func (Keeper) GetEligibleLiquidationTargets 

func (k Keeper) GetEligibleLiquidationTargets(ctx sdk.Context) ([]sdk.AccAddress, error)

GetEligibleLiquidationTargets returns a list of borrower addresses eligible for liquidation.

func (Keeper) GetParams 

func (k Keeper) GetParams(ctx sdk.Context) types.Params

GetParams gets the x/leverage module's parameters.

func (Keeper) GetReserves 

func (k Keeper) GetReserves(ctx sdk.Context, denom string) sdk.Coin

GetReserves gets the reserved amount of a specified token. On invalid asset, the reserved amount is zero.

func (Keeper) GetSpecialAssetPairs 

func (k Keeper) GetSpecialAssetPairs(ctx sdk.Context, denom string) []types.SpecialAssetPair

GetSpecialAssetPairs returns all the special asset pairs from the x/leverage module's KVStore which match a single asset.

func (Keeper) GetSupplied 

func (k Keeper) GetSupplied(ctx sdk.Context, supplierAddr sdk.AccAddress, denom string) (sdk.Coin, error)

GetSupplied returns an sdk.Coin representing how much of a given denom a user has supplied, including interest accrued.

func (Keeper) GetTokenSettings 

func (k Keeper) GetTokenSettings(ctx sdk.Context, denom string) (types.Token, error)

GetTokenSettings gets a token from the x/leverage module's KVStore.

func (Keeper) GetTotalBorrowed 

func (k Keeper) GetTotalBorrowed(ctx sdk.Context, denom string) sdk.Coin

GetTotalBorrowed returns the total borrowed in a given denom.

func (Keeper) GetTotalCollateral 

func (k Keeper) GetTotalCollateral(ctx sdk.Context, denom string) sdk.Coin

GetTotalCollateral returns an sdk.Coin representing how much of a given uToken the x/leverage module account currently holds as collateral. Non-uTokens return zero.

func (Keeper) GetTotalSupply 

func (k Keeper) GetTotalSupply(ctx sdk.Context, denom string) (sdk.Coin, error)

GetTotalSupply returns the total supplied by all suppliers in a given denom, including any interest accrued.

func (Keeper) GetUTokenSupply 

func (k Keeper) GetUTokenSupply(ctx sdk.Context, denom string) sdk.Coin

GetUTokenSupply gets the total supply of a specified utoken, as tracked by module state. On invalid asset or non-uToken, the supply is zero.

func (Keeper) InitGenesis 

func (k Keeper) InitGenesis(ctx sdk.Context, genState types.GenesisState)

InitGenesis initializes the x/leverage module state from a provided genesis state.

func (Keeper) LeveragedLiquidate 

func (k Keeper) LeveragedLiquidate(
	ctx sdk.Context, liquidatorAddr, borrowerAddr sdk.AccAddress,
	repayDenom, rewardDenom string, maxRepay sdk.Dec,
) (repaid sdk.Coin, reward sdk.Coin, err error)

LeveragedLiquidate

func (Keeper) Liquidate 

func (k Keeper) Liquidate(
	ctx sdk.Context, liquidatorAddr, borrowerAddr sdk.AccAddress, requestedRepay sdk.Coin, rewardDenom string,
) (repaid sdk.Coin, liquidated sdk.Coin, reward sdk.Coin, err error)

Liquidate attempts to repay one of an eligible borrower's borrows (in part or in full) in exchange for some of the borrower's uToken collateral or associated base tokens. If the borrower is not over their liquidation limit, or the repayment or reward denominations are invalid, an error is returned. If the attempted repayment is greater than the amount owed or the maximum that can be repaid due to parameters or available balances, then a partial liquidation, equal to the maximum valid amount, is performed. Because partial liquidation is possible and exchange rates vary, Liquidate returns the actual amount of tokens repaid, collateral liquidated, and base tokens or uTokens rewarded.

func (Keeper) Logger 

func (k Keeper) Logger(ctx sdk.Context) log.Logger

func (Keeper) ModuleAvailableLiquidity 

func (k Keeper) ModuleAvailableLiquidity(ctx sdk.Context, denom string) (sdkmath.Int, error)

ModuleAvailableLiquidity calculates the maximum available liquidity of a Token denom from the module can be used, respecting the MinCollateralLiquidity set for given Token.

func (Keeper) ModuleBalance 

func (k Keeper) ModuleBalance(ctx sdk.Context, denom string) sdk.Coin

ModuleBalance returns the amount of a given token held in the x/leverage module account

func (Keeper) ModuleMaxWithdraw 

func (k Keeper) ModuleMaxWithdraw(ctx sdk.Context, spendableUTokens sdk.Coin) (sdkmath.Int, error)

ModuleMaxWithdraw calculates the maximum available amount of uToken to withdraw from the module given the amount of user's spendable tokens. The calculation first finds the maximum amount of non-collateral uTokens the user can withdraw up to the amount in their wallet, then determines how much collateral can be withdrawn in addition to that. The returned value is the sum of the two values.

func (Keeper) PriceRatio 

func (k Keeper) PriceRatio(ctx sdk.Context, fromDenom, toDenom string, mode types.PriceMode) (sdk.Dec, error)

PriceRatio computes the ratio of the USD prices of two base tokens, as sdk.Dec(fromPrice/toPrice). Will return an error if either token price is not positive, and guarantees a positive output. Computation uses price of token's symbol denom to avoid rounding errors for exponent >= 18 tokens, but returns in terms of base tokens. Uses the same price mode for both token denoms involved.

func (Keeper) Repay 

func (k Keeper) Repay(ctx sdk.Context, borrowerAddr sdk.AccAddress, payment sdk.Coin) (sdk.Coin, error)

Repay attempts to repay a borrow position. If asset type is invalid, account balance is insufficient, or borrower has no borrows in payment denom to repay, we return an error. Additionally, if the amount provided is greater than the full repayment amount, only the necessary amount is transferred. Because amount repaid may be less than the repayment attempted, Repay returns the actual amount repaid.

func (Keeper) RepayBadDebt 

func (k Keeper) RepayBadDebt(ctx sdk.Context, borrowerAddr sdk.AccAddress, denom string) (bool, error)

RepayBadDebt uses reserves to repay borrower's debts of a given denom. It returns a boolean representing whether full repayment was achieved. This function assumes the borrower has already been verified to have no collateral remaining.

func (*Keeper) SetBondHooks 

func (k *Keeper) SetBondHooks(h ...types.BondHooks)

SetBondHooks sets the module's bonded amount and force unbonding hooks. Panics if Bond hooks have been already set.

func (Keeper) SetParams 

func (k Keeper) SetParams(ctx sdk.Context, params types.Params) error

SetParams sets the x/leverage module's parameters.

func (Keeper) SetSpecialAssetPair 

func (k Keeper) SetSpecialAssetPair(ctx sdk.Context, pair types.SpecialAssetPair) error

SetSpecialAssetPair stores a SpecialAssetPair into the x/leverage module's KVStore. Deletes any existing special pairs between the assets instead if given zero collateral weight and zero liquidation threshold.

func (*Keeper) SetTokenHooks 

func (k *Keeper) SetTokenHooks(h ...types.TokenHooks)

SetTokenHooks sets the module's token registry hooks. Token hooks can only be set once.

func (Keeper) SetTokenSettings 

func (k Keeper) SetTokenSettings(ctx sdk.Context, token types.Token) error

SetTokenSettings stores a Token into the x/leverage module's KVStore.

func (Keeper) Supply 

func (k Keeper) Supply(ctx sdk.Context, supplierAddr sdk.AccAddress, coin sdk.Coin) (sdk.Coin, error)

Supply attempts to deposit assets into the leverage module account in exchange for uTokens. If asset type is invalid or account balance is insufficient, we return an error. Returns the amount of uTokens minted. Note: For supplying from a module account instead of a user, use SupplyFromModule.

func (Keeper) SupplyFromModule 

func (k Keeper) SupplyFromModule(ctx sdk.Context, fromModule string, coin sdk.Coin) (sdk.Coin, bool, error)

SupplyFromModule attempts to deposit assets into the leverage module account in exchange for uTokens on behalf of another module. In addition to the regular error return, also returns a boolean which indicates whether the error was recoverable. A recoverable = true error means SupplyFromModule was aborted without harming state.

func (Keeper) SupplyUtilization 

func (k Keeper) SupplyUtilization(ctx sdk.Context, denom string) sdk.Dec

SupplyUtilization calculates the current supply utilization of a token denom.

func (Keeper) SweepBadDebts 

func (k Keeper) SweepBadDebts(ctx sdk.Context) error

SweepBadDebts attempts to repay all bad debts in the system.

func (Keeper) ToToken 

func (k Keeper) ToToken(ctx sdk.Context, uToken sdk.Coin) (sdk.Coin, error)

ToToken returns Token in the amount a user would receive when withdrawing the uToken. Returns error if the input is not a uToken.

func (Keeper) ToTokens 

func (k Keeper) ToTokens(ctx sdk.Context, uTokens sdk.Coins) (sdk.Coins, error)

ToTokens returns list of Tokens in the amount a user would receive when withdrawing the list of uTokens. Returns error if any of the inputs are tokens.

func (Keeper) ToUToken 

func (k Keeper) ToUToken(ctx sdk.Context, token sdk.Coin) (sdk.Coin, error)

ToUToken returns uToken in the amount a user would receive when supplying the token. Returns error if the input is not a Token.

func (Keeper) TokenPrice 

func (k Keeper) TokenPrice(ctx sdk.Context, baseDenom string, mode types.PriceMode) (sdk.Dec, uint32, error)

TokenPrice returns the USD value of a token's symbol denom, e.g. `UMEE` (rather than `uumee`). Note, the input denom must still be the base denomination, e.g. uumee. When error is nil, price is guaranteed to be positive. Also returns the token's exponent to reduce redundant registry reads.

func (Keeper) TokenValue 

func (k Keeper) TokenValue(ctx sdk.Context, coin sdk.Coin, mode types.PriceMode) (sdk.Dec, error)

TokenValue returns the total token value given a Coin. An error is returned if we cannot get the token's price or if it's not an accepted token. Computation uses price of token's default denom to avoid rounding errors for exponent >= 18 tokens.

func (Keeper) TokenWithValue 

func (k Keeper) TokenWithValue(ctx sdk.Context, denom string, value sdk.Dec, mode types.PriceMode) (sdk.Coin, error)

TokenWithValue creates a token of a given denom with an given USD value. Returns an error on invalid price or denom. Rounds down, i.e. the value of the token returned may be slightly less than the requested value.

func (Keeper) TotalTokenValue 

func (k Keeper) TotalTokenValue(ctx sdk.Context, coins sdk.Coins, mode types.PriceMode) (sdk.Dec, error)

TotalTokenValue returns the total value of all supplied tokens. It is equivalent to the sum of TokenValue on each coin individually, except it ignores unregistered and blacklisted tokens instead of returning an error.

func (Keeper) UTokenWithValue 

func (k Keeper) UTokenWithValue(ctx sdk.Context, denom string, value sdk.Dec, mode types.PriceMode) (sdk.Coin, error)

UTokenWithValue creates a uToken of a given denom with an given USD value. Returns an error on invalid price or non-uToken denom. Rounds down, i.e. the value of the uToken returned may be slightly less than the requested value.

func (Keeper) UpdateTokenRegistry 

func (k Keeper) UpdateTokenRegistry(
	ctx sdk.Context, toUpdate, toAdd []types.Token,
	regDenoms map[string]types.Token, byEmergencyGroup bool,
) error

UpdateTokenRegistry adds new tokens or updates the new tokens settings to registry. It requires maps of the currently registered base and symbol denoms, so it can prevent duplicates of either.

func (Keeper) ValueWithBorrowFactor 

func (k Keeper) ValueWithBorrowFactor(ctx sdk.Context, coins sdk.Coins, mode types.PriceMode) (sdk.Dec, error)

ValueWithBorrowFactor returns the total value of all input tokens, each multiplied by borrow factor (which is the minimum of 2.0 and 1/collateral weight). It ignores unregistered and blacklisted tokens instead of returning an error, but will error on unavailable prices.

func (*Keeper) VisibleCollateralShare 

func (k *Keeper) VisibleCollateralShare(ctx sdk.Context, denom string) (sdk.Dec, error)

VisibleCollateralShare calculates the portion of overall collateral (measured in USD value) that a given uToken denom represents. If an asset other than the denom requested is missing an oracle price, it ignores that asset's contribution to the system's overall collateral, thus potentially overestimating the requested denom's collateral share while improving availability.

func (Keeper) VisibleCollateralValue 

func (k Keeper) VisibleCollateralValue(ctx sdk.Context, collateral sdk.Coins, mode types.PriceMode) (sdk.Dec, error)

VisibleCollateralValue uses the price oracle to determine the value (in USD) provided by collateral sdk.Coins, using each token's uToken exchange rate. Unlike CalculateCollateralValue, this function will not return an error if value calculation fails on a token - instead, that token will contribute zero value to the total.

func (Keeper) VisibleTokenValue 

func (k Keeper) VisibleTokenValue(ctx sdk.Context, coins sdk.Coins, mode types.PriceMode) (sdk.Dec, error)

VisibleTokenValue functions like TotalTokenValue, but interprets missing oracle prices as zero value instead of returning an error.

func (Keeper) VisibleUTokensValue 

func (k Keeper) VisibleUTokensValue(ctx sdk.Context, uTokens sdk.Coins, mode types.PriceMode) (sdk.Dec, error)

VisibleUTokensValue converts uTokens to tokens and calls VisibleTokenValue. Errors on non-uTokens.

func (Keeper) Withdraw 

func (k Keeper) Withdraw(ctx sdk.Context, supplierAddr sdk.AccAddress, uToken sdk.Coin) (sdk.Coin, bool, error)

Withdraw attempts to redeem uTokens from the leverage module in exchange for base tokens. If there are not enough uTokens in balance, Withdraw will attempt to withdraw uToken collateral to make up the difference. If the uToken denom is invalid or balances are insufficient to withdraw the amount requested, returns an error. Returns the amount of base tokens received. This function does NOT check that a borrower remains under their borrow limit or that collateral liquidity remains healthy - those assertions have been moved to MsgServer. Returns a boolean which is true if some or all of the withdrawn uTokens were from collateral. Note: For withdrawing to a module account instead of a user, use WithdrawToModule.

func (Keeper) WithdrawToModule 

func (k Keeper) WithdrawToModule(ctx sdk.Context, toModule string, uToken sdk.Coin) (sdk.Coin, bool, error)

WithdrawToModule attempts to redeem uTokens from the leverage module in exchange for base tokens. This is done on behalf of another module, not by a user account. Modules do not have collateral. If the uToken denom is invalid or balances are insufficient to withdraw the amount requested, returns an error. Returns the amount of base tokens received. In addition to the regular error return, also returns a boolean which indicates whether the error was recoverable. A recoverable = true error means WithdrawToModule was aborted without harming state.

type Migrator 

type Migrator struct {
	// contains filtered or unexported fields
}

Migrator is a struct for handling in-place store migrations.

func NewMigrator 

func NewMigrator(keeper *Keeper) Migrator

NewMigrator creates a Migrator.

type Querier 

type Querier struct {
	Keeper
}

Querier implements a QueryServer for the x/leverage module.

func NewQuerier 

func NewQuerier(k Keeper) Querier

func (Querier) AccountBalances 

func (q Querier) AccountBalances(
	goCtx context.Context,
	req *types.QueryAccountBalances,
) (*types.QueryAccountBalancesResponse, error)

func (Querier) AccountSummaries added in v6.6.0 

func (q Querier) AccountSummaries(goCtx context.Context, req *types.QueryAccountSummaries) (
	*types.QueryAccountSummariesResponse, error,
)

AccountSummaries implements types.QueryServer.

func (Querier) AccountSummary 

func (q Querier) AccountSummary(
	goCtx context.Context,
	req *types.QueryAccountSummary,
) (*types.QueryAccountSummaryResponse, error)

AccountSummary implements types.QueryServer.

func (Querier) BadDebts 

func (q Querier) BadDebts(
	goCtx context.Context,
	req *types.QueryBadDebts,
) (*types.QueryBadDebtsResponse, error)

func (Querier) Inspect 

func (q Querier) Inspect(
	goCtx context.Context,
	req *types.QueryInspect,
) (*types.QueryInspectResponse, error)

Separated from grpc_query.go

func (Querier) InspectAccount added in v6.1.0 

func (q Querier) InspectAccount(
	goCtx context.Context,
	req *types.QueryInspectAccount,
) (*types.QueryInspectAccountResponse, error)

Separated from grpc_query.go

func (Querier) LiquidationTargets 

func (q Querier) LiquidationTargets(
	goCtx context.Context,
	req *types.QueryLiquidationTargets,
) (*types.QueryLiquidationTargetsResponse, error)

func (Querier) MarketSummary 

func (q Querier) MarketSummary(
	goCtx context.Context,
	req *types.QueryMarketSummary,
) (*types.QueryMarketSummaryResponse, error)

func (Querier) MaxBorrow 

func (q Querier) MaxBorrow(
	goCtx context.Context,
	req *types.QueryMaxBorrow,
) (*types.QueryMaxBorrowResponse, error)

func (Querier) MaxWithdraw 

func (q Querier) MaxWithdraw(
	goCtx context.Context,
	req *types.QueryMaxWithdraw,
) (*types.QueryMaxWithdrawResponse, error)

func (Querier) Params 

func (q Querier) Params(
	goCtx context.Context,
	req *types.QueryParams,
) (*types.QueryParamsResponse, error)

func (Querier) RegisteredTokens 

func (q Querier) RegisteredTokens(
	goCtx context.Context,
	req *types.QueryRegisteredTokens,
) (*types.QueryRegisteredTokensResponse, error)

func (Querier) RegisteredTokensWithMarkets added in v6.3.0 

func (q Querier) RegisteredTokensWithMarkets(
	goCtx context.Context,
	req *types.QueryRegisteredTokensWithMarkets,
) (*types.QueryRegisteredTokensWithMarketsResponse, error)

func (Querier) SpecialAssets 

func (q Querier) SpecialAssets(
	goCtx context.Context,
	req *types.QuerySpecialAssets,
) (*types.QuerySpecialAssetsResponse, error)

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.