worker

package module
v2.3.1+incompatible Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: May 30, 2016 License: MIT Imports: 36 Imported by: 3

README

Worker

Worker is the component of Travis CI that will run a CI job on some form of compute instance. It's responsible for getting the bash script from travis-build, spin up the compute instance (VM, Docker container, or maybe something different), upload the bash script, run it and stream the logs back to travis-logs. It also sends state updates to travis-hub.

Installing

from binary

Find the version you wish to install on the GitHub Releases page and download either the darwin-amd64 binary for OS X or the linux-amd64 binary for Linux. No other operating systems or architectures have pre-built binaries at this time.

from package

Use the ./bin/travis-worker-install script, or take a look at the packagecloud instructions.

from source
  1. clone this down
  2. install Go and gvt.
  3. make

Configuring Travis Worker

Travis Worker is configured with environment variables or command line flags via the codegangsta/cli library. A list of the non-dynamic flags and environment variables may be found by invoking the built-in help system:

travis-worker --help
Configuring the requested provider

Each provider requires its own configuration, which must be provided via environment variables namespaced by TRAVIS_WORKER_{PROVIDER}_, e.g. for the docker provider:

export TRAVIS_WORKER_DOCKER_ENDPOINT="tcp://localhost:4243"
export TRAVIS_WORKER_DOCKER_PRIVILEGED="false"
export TRAVIS_WORKER_DOCKER_CERT_PATH="/etc/secret-docker-cert-stuff"
Verifying and exporting configuration

To inspect the parsed configuration in a format that can be used as a base environment variable configuration, use the --echo-config flag, which will exit immediately after writing to stdout:

travis-worker --echo-config

Running Travis Worker

  1. make
  2. ${GOPATH%%:*}/bin/travis-worker

Stopping Travis Worker

Travis Worker has two shutdown modes: Graceful and immediate. The graceful shutdown will tell the worker to not start any additional jobs, but finish the jobs it is currently running before it shuts down. The immediate shutdown will make the worker stop the jobs it's working on and requeue them, and clean up any open resources (shut down VMs, cleanly close connections, etc.)

To start a graceful shutdown, send an INT signal to the worker (for example using kill -INT). To start an immediate shutdown, send a TERM signal to the worker (for example using kill -TERM).

Go dependency management

Travis Worker is built via the standard go commands, and dependencies managed by gvt.

To work with the dependencies you need to do the following first

  • Have this repository checked out
  • Install gvt with github.com/FiloSottile/gvt
Updating existing vendored dependencies

To update and existing vendored dependency, do the following in this directory:

  • gvt update name/of/dependency e.g. gvt update github.com/pkg/sftp
Adding a new dependency

To add a new dependency, do the following:

  • gvt fetch name/of/package e.g. gvt fetch github.com/pkg/sftp

Development

This section is for anyone wishing to contribute code to Worker. The code itself should have godoc-compatible docs (which can be viewed on godoc.org: https://godoc.org/github.com/travis-ci/worker), this is mainly a higher-level overview of the code.

Release process

The parts of the release process that haven't yet been automated look like this:

  • review the diff since last release for silliness
  • decide what the version bump should be
  • update ./CHANGELOG.md (in a release prep branch)
  • tag accordingly after merge
  • update github release tag with relevant section from ./CHANGELOG.md
  • attach binaries to github release tag

See LICENSE file.

© 2014-2016 Travis CI GmbH

Documentation

Overview

Package worker implements the core of Worker.

The main coordinating component in the core is the Processor, and is a good place to start when exploring the code. It gets the jobs off the job queue and calls the right things in order to run it. The ProcessorPool starts up the required number of Processors to get the concurrency that's wanted for a single Worker instance.

Index

Constants

View Source 
const (
	VMTypeDefault = "default"
	VMTypePremium = "premium"
)

Variables

View Source 
var (
	// LogWriterTick is how often the buffer should be flushed out and sent to
	// travis-logs.
	LogWriterTick = 500 * time.Millisecond

	// LogChunkSize is a bit of a magic number, calculated like this: The
	// maximum Pusher payload is 10 kB (or 10 KiB, who knows, but let's go with
	// 10 kB since that is smaller). Looking at the travis-logs source, the
	// current message overhead (i.e. the part of the payload that isn't
	// the content of the log part) is 42 bytes + the length of the JSON-
	// encoded ID and the length of the JSON-encoded sequence number. A 64-
	// bit number is up to 20 digits long, so that means (assuming we don't
	// go over 64-bit numbers) the overhead is up to 82 bytes. That means
	// we can send up to 9918 bytes of content. However, the JSON-encoded
	// version of a string can be significantly longer than the raw bytes.
	// Worst case that I could find is "<", which with the Go JSON encoder
	// becomes "\u003c" (i.e. six bytes long). So, given a string of just
	// left angle brackets, the string would become six times as long,
	// meaning that the longest string we can take is 1653. We could still
	// get errors if we go over 64-bit numbers, but I find the likeliness
	// of that happening to both the sequence number, the ID, and us maxing
	// out the worst-case logs to be quite unlikely, so I'm willing to live
	// with that. --Henrik
	LogChunkSize = 1653

	// ErrWrotePastMaxLogLength is returned by LogWriter.Write if the write
	// caused the number of written bytes to go over the maximum log length.
	ErrWrotePastMaxLogLength = errors.New("wrote past max length")
)
View Source 
var (
	// VersionString is the git describe version set at build time
	VersionString = "?"
	// RevisionString is the git revision set at build time
	RevisionString = "?"
	// RevisionURLString is the full URL to the revision set at build time
	RevisionURLString = "?"
	// GeneratedString is the build date set at build time
	GeneratedString = "?"
	// CopyrightString is the copyright set at build time
	CopyrightString = "?"
)

Functions

This section is empty.

Types

type AMQPCanceller added in v1.3.0 

type AMQPCanceller struct {
	// contains filtered or unexported fields
}

AMQPCanceller is responsible for listening to a command queue on AMQP and dispatching the commands to the right place. Currently the only valid command is the 'cancel job' command.

func NewAMQPCanceller added in v1.3.0 

func NewAMQPCanceller(ctx gocontext.Context, conn *amqp.Connection) *AMQPCanceller

NewAMQPCanceller creates a new AMQPCanceller. No network traffic occurs until you call Run()

func (*AMQPCanceller) Run added in v1.3.0 

func (d *AMQPCanceller) Run()

Run will make the AMQPCanceller listen to the worker command queue and start dispatching any incoming commands.

func (*AMQPCanceller) Subscribe added in v1.3.0 

func (d *AMQPCanceller) Subscribe(id uint64, ch chan<- struct{}) error

Subscribe is an implementation of Canceller.Subscribe.

func (*AMQPCanceller) Unsubscribe added in v1.3.0 

func (d *AMQPCanceller) Unsubscribe(id uint64)

Unsubscribe is an implementation of Canceller.Unsubscribe.

type AMQPJobQueue added in v1.3.0 

type AMQPJobQueue struct {
	DefaultLanguage, DefaultDist, DefaultGroup, DefaultOS string
	// contains filtered or unexported fields
}

AMQPJobQueue is a JobQueue that uses AMQP

func NewAMQPJobQueue added in v1.3.0 

func NewAMQPJobQueue(conn *amqp.Connection, queue string) (*AMQPJobQueue, error)

NewAMQPJobQueue creates a AMQPJobQueue backed by the given AMQP connections and connects to the AMQP queue with the given name. The queue will be declared in AMQP when this function is called, so an error could be raised if the queue already exists, but with different attributes than we expect.

func (*AMQPJobQueue) Cleanup added in v1.3.0 

func (q *AMQPJobQueue) Cleanup() error

Cleanup closes the underlying AMQP connection

func (*AMQPJobQueue) Jobs added in v1.3.0 

func (q *AMQPJobQueue) Jobs(ctx gocontext.Context) (outChan <-chan Job, err error)

Jobs creates a new consumer on the queue, and returns three channels. The first channel gets sent every BuildJob that we receive from AMQP. The stopChan is a channel that can be closed in order to stop the consumer.

type BuildPayload 

type BuildPayload struct {
	ID     uint64 `json:"id"`
	Number string `json:"number"`
}

BuildPayload contains information about the build.

type BuildScriptGenerator 

type BuildScriptGenerator interface {
	Generate(gocontext.Context, *simplejson.Json) ([]byte, error)
}

A BuildScriptGenerator generates a build script for a given job payload.

func NewBuildScriptGenerator 

func NewBuildScriptGenerator(cfg *config.Config) BuildScriptGenerator

NewBuildScriptGenerator creates a generator backed by an HTTP API.

type BuildScriptGeneratorError 

type BuildScriptGeneratorError struct {

	// true when this error can be recovered by retrying later
	Recover bool
	// contains filtered or unexported fields
}

A BuildScriptGeneratorError is sometimes used by the Generate method on a BuildScriptGenerator to return more metadata about an error.

type CLI added in v1.3.0 

type CLI struct {
	Config               *config.Config
	BuildScriptGenerator BuildScriptGenerator
	BackendProvider      backend.Provider
	ProcessorPool        *ProcessorPool
	Canceller            Canceller
	JobQueue             JobQueue
	// contains filtered or unexported fields
}

CLI is the top level of execution for the whole shebang

func NewCLI added in v1.3.0 

func NewCLI(c *cli.Context) *CLI

NewCLI creates a new *CLI from a *cli.Context

func (*CLI) Run added in v1.3.0 

func (i *CLI) Run()

Run starts all long-running processes and blocks until the processor pool returns from its Run func

func (*CLI) Setup added in v1.3.0 

func (i *CLI) Setup() (bool, error)

Setup runs one-time preparatory actions and returns a boolean success value that is used to determine if it is safe to invoke the Run func

type Canceller 

type Canceller interface {
	// Subscribe will set up a subscription for cancellation messages for the
	// given job ID. When a cancellation message comes in, the channel will be
	// closed. Only one subscription per job ID is valid, if there's already a
	// subscription set up, an error will be returned.
	Subscribe(id uint64, ch chan<- struct{}) error

	// Unsubscribe removes the existing subscription for the given job ID.
	Unsubscribe(id uint64)
}

A Canceller allows you to subscribe to and unsubscribe from cancellation messages for a given job ID.

type FileCanceller added in v1.3.0 

type FileCanceller struct {
	// contains filtered or unexported fields
}

FileCanceller fulfills the Canceller interface for file-based queues

func NewFileCanceller added in v1.3.0 

func NewFileCanceller(ctx gocontext.Context, baseDir string) *FileCanceller

NewFileCanceller creates a *FileCanceller

func (*FileCanceller) Run added in v1.3.0 

func (c *FileCanceller) Run()

Run is a no-op

func (*FileCanceller) Subscribe added in v1.3.0 

func (c *FileCanceller) Subscribe(id uint64, ch chan<- struct{}) error

Subscribe is a no-op

func (*FileCanceller) Unsubscribe added in v1.3.0 

func (c *FileCanceller) Unsubscribe(id uint64)

Unsubscribe is a no-op

type FileJobQueue added in v1.3.0 

type FileJobQueue struct {
	DefaultLanguage, DefaultDist, DefaultGroup, DefaultOS string
	// contains filtered or unexported fields
}

FileJobQueue is a JobQueue that uses directories for input, state, and output

func NewFileJobQueue added in v1.3.0 

func NewFileJobQueue(baseDir, queue string, pollingInterval time.Duration) (*FileJobQueue, error)

NewFileJobQueue creates a *FileJobQueue from a base directory and queue name

func (*FileJobQueue) Cleanup added in v1.3.0 

func (f *FileJobQueue) Cleanup() error

Cleanup is a no-op

func (*FileJobQueue) Jobs added in v1.3.0 

func (f *FileJobQueue) Jobs(ctx gocontext.Context) (<-chan Job, error)

Jobs returns a channel of jobs from the created directory

type FinishState 

type FinishState string

FinishState is the state that a job finished with (such as pass/fail/etc.). You should not provide a string directly, but use one of the FinishStateX constants defined in this package. 

const (
	FinishStatePassed    FinishState = "passed"
	FinishStateFailed    FinishState = "failed"
	FinishStateErrored   FinishState = "errored"
	FinishStateCancelled FinishState = "cancelled"
)

Valid finish states for the FinishState type

type Job 

type Job interface {
	Payload() *JobPayload
	RawPayload() *simplejson.Json
	StartAttributes() *backend.StartAttributes

	Received() error
	Started() error
	Error(gocontext.Context, string) error
	Requeue() error
	Finish(FinishState) error

	LogWriter(gocontext.Context) (LogWriter, error)
}

A Job ties togeher all the elements required for a build job

type JobJobPayload 

type JobJobPayload struct {
	ID     uint64 `json:"id"`
	Number string `json:"number"`
}

JobJobPayload contains information about the job.

type JobPayload 

type JobPayload struct {
	Type       string                 `json:"type"`
	Job        JobJobPayload          `json:"job"`
	Build      BuildPayload           `json:"source"`
	Repository RepositoryPayload      `json:"repository"`
	UUID       string                 `json:"uuid"`
	Config     map[string]interface{} `json:"config"`
	Timeouts   TimeoutsPayload        `json:"timeouts,omitempty"`
	VMType     string                 `json:"vm_type"`
}

JobPayload is the payload we receive over RabbitMQ.

type JobQueue 

type JobQueue interface {
	Jobs(gocontext.Context) (<-chan Job, error)
	Cleanup() error
}

JobQueue is the minimal interface needed by a ProcessorPool

type LogWriter 

type LogWriter interface {
	io.WriteCloser
	WriteAndClose([]byte) (int, error)
	SetTimeout(time.Duration)
	Timeout() <-chan time.Time
	SetMaxLogLength(int)
}

LogWriter is primarily an io.Writer that will send all bytes to travis-logs for processing, and also has some utility methods for timeouts and log length limiting. Each LogWriter is tied to a given job, and can be gotten by calling the LogWriter() method on a Job.

type Processor 

type Processor struct {
	ID uuid.UUID

	// ProcessedCount contains the number of jobs that has been processed
	// by this Processor. This value should not be modified outside of the
	// Processor.
	ProcessedCount int

	// CurrentStatus contains the current status of the processor, and can
	// be one of "new", "waiting", "processing" or "done".
	CurrentStatus string

	// LastJobID contains the ID of the last job the processor processed.
	LastJobID uint64

	SkipShutdownOnLogTimeout bool
	// contains filtered or unexported fields
}

A Processor gets jobs off the job queue and coordinates running it with other components.

func NewProcessor 

func NewProcessor(ctx gocontext.Context, hostname string, buildJobsChan <-chan Job,
	provider backend.Provider, generator BuildScriptGenerator, canceller Canceller,
	hardTimeout, logTimeout, scriptUploadTimeout, startupTimeout time.Duration) (*Processor, error)

NewProcessor creates a new processor that will run the build jobs on the given channel using the given provider and getting build scripts from the generator.

func (*Processor) GracefulShutdown 

func (p *Processor) GracefulShutdown()

GracefulShutdown tells the processor to finish the job it is currently processing, but not pick up any new jobs. This method will return immediately, the processor is done when Run() returns.

func (*Processor) Run 

func (p *Processor) Run()

Run starts the processor. This method will not return until the processor is terminated, either by calling the GracefulShutdown or Terminate methods, or if the build jobs channel is closed.

func (*Processor) Terminate 

func (p *Processor) Terminate()

Terminate tells the processor to stop working on the current job as soon as possible.

type ProcessorPool 

type ProcessorPool struct {
	Context   gocontext.Context
	Provider  backend.Provider
	Generator BuildScriptGenerator
	Canceller Canceller
	Hostname  string

	HardTimeout, LogTimeout, ScriptUploadTimeout, StartupTimeout time.Duration

	SkipShutdownOnLogTimeout bool
	// contains filtered or unexported fields
}

A ProcessorPool spins up multiple Processors handling build jobs from the same queue.

func NewProcessorPool 

func NewProcessorPool(ppc *ProcessorPoolConfig,
	provider backend.Provider, generator BuildScriptGenerator,
	canceller Canceller) *ProcessorPool

NewProcessorPool creates a new processor pool using the given arguments.

func (*ProcessorPool) Decr added in v1.3.0 

func (p *ProcessorPool) Decr()

Decr pops a processor out of the pool and issues a graceful shutdown

func (*ProcessorPool) Each added in v1.3.0 

func (p *ProcessorPool) Each(f func(int, *Processor))

Each loops through all the processors in the pool and calls the given function for each of them, passing in the index and the processor. The order of the processors is the same for the same set of processors.

func (*ProcessorPool) GracefulShutdown 

func (p *ProcessorPool) GracefulShutdown()

GracefulShutdown causes each processor in the pool to start its graceful shutdown.

func (*ProcessorPool) Incr added in v1.3.0 

func (p *ProcessorPool) Incr()

Incr adds a single running processor to the pool

func (*ProcessorPool) Run 

func (p *ProcessorPool) Run(poolSize int, queue JobQueue) error

Run starts up a number of processors and connects them to the given queue. This method stalls until all processors have finished.

func (*ProcessorPool) Size added in v1.3.0 

func (p *ProcessorPool) Size() int

Size returns the number of processors in the pool

type ProcessorPoolConfig 

type ProcessorPoolConfig struct {
	Hostname string
	Context  gocontext.Context

	HardTimeout, LogTimeout, ScriptUploadTimeout, StartupTimeout time.Duration
}

type RepositoryPayload 

type RepositoryPayload struct {
	ID   uint64 `json:"id"`
	Slug string `json:"slug"`
}

RepositoryPayload contains information about the repository.

type SentryHook added in v1.3.0 

type SentryHook struct {
	Timeout time.Duration
	// contains filtered or unexported fields
}

SentryHook delivers logs to a sentry server

func NewSentryHook added in v1.3.0 

func NewSentryHook(DSN string, levels []logrus.Level) (*SentryHook, error)

NewSentryHook creates a hook to be added to an instance of logger and initializes the raven client. This method sets the timeout to 100 milliseconds.

func (*SentryHook) Fire added in v1.3.0 

func (hook *SentryHook) Fire(entry *logrus.Entry) error

Fire is called when an event should be sent to sentry

func (*SentryHook) Levels added in v1.3.0 

func (hook *SentryHook) Levels() []logrus.Level

Levels returns the available logging levels.

type TimeoutsPayload added in v1.3.0 

type TimeoutsPayload struct {
	HardLimit  uint64 `json:"hard_limit"`
	LogSilence uint64 `json:"log_silence"`
}

TimeoutsPayload contains information about any custom timeouts. The timeouts are given in seconds, and a value of 0 means no custom timeout is set.

Source Files

View all Source files

Directories

Path Synopsis
Package backend provides the compute instance backends supported by Worker.
 Package backend provides the compute instance backends supported by Worker.
cmd
travis-worker
Package main implements the CLI for the travis-worker binary
 Package main implements the CLI for the travis-worker binary
Package config contains the flags and defaults for Worker configuration.
 Package config contains the flags and defaults for Worker configuration.
Package context contains functions to embed data in a context.
 Package context contains functions to embed data in a context.
Package image contains logic for image selection logic.
 Package image contains logic for image selection logic.
Package metrics provides easy methods to send metrics
 Package metrics provides easy methods to send metrics
Package ratelimit implements a rate limiter to avoid calling APIs too often.
 Package ratelimit implements a rate limiter to avoid calling APIs too often.

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.