node

package
v1.11.6 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Mar 20, 2024 License: GPL-3.0 Imports: 38 Imported by: 0

Documentation

Overview

Package node sets up multi-protocol Tos nodes.

In the model exposed by this package, a node is a collection of services which use shared resources to provide RPC APIs. Services can also offer devp2p protocols, which are wired up to the devp2p network when the node instance is started.

Node Lifecycle

The Node object has a lifecycle consisting of three basic states, INITIALIZING, RUNNING and CLOSED. 

●───────┐
     New()
        │
        ▼
  INITIALIZING ────Start()─┐
        │                  │
        │                  ▼
    Close()             RUNNING
        │                  │
        ▼                  │
     CLOSED ◀──────Close()─┘

Creating a Node allocates basic resources such as the data directory and returns the node in its INITIALIZING state. Lifecycle objects, RPC APIs and peer-to-peer networking protocols can be registered in this state. Basic operations such as opening a key-value database are permitted while initializing.

Once everything is registered, the node can be started, which moves it into the RUNNING state. Starting the node starts all registered Lifecycle objects and enables RPC and peer-to-peer networking. Note that no additional Lifecycles, APIs or p2p protocols can be registered while the node is running.

Closing the node releases all held resources. The actions performed by Close depend on the state it was in. When closing a node in INITIALIZING state, resources related to the data directory are released. If the node was RUNNING, closing it also stops all Lifecycle objects and shuts down RPC and peer-to-peer networking.

You must always call Close on Node, even if the node was not started.

Resources Managed By Node

All file-system resources used by a node instance are located in a directory called the data directory. The location of each resource can be overridden through additional node configuration. The data directory is optional. If it is not set and the location of a resource is otherwise unspecified, package node will create the resource in memory.

To access to the devp2p network, Node configures and starts p2p.Server. Each host on the devp2p network has a unique identifier, the node key. The Node instance persists this key across restarts. Node also loads static and trusted node lists and ensures that knowledge about other hosts is persisted.

JSON-RPC servers which run HTTP, WebSocket or IPC can be started on a Node. RPC modules offered by registered services will be offered on those endpoints. Users can restrict any endpoint to a subset of RPC modules. Node itself offers the "debug", "admin" and "web3" modules.

Service implementations can open LevelDB databases through the service context. Package node chooses the file system location of each database. If the node is configured to run without a data directory, databases are opened in memory instead.

Node also creates the shared store of encrypted Tos account keys. Services can access the account manager through the service context.

Sharing Data Directory Among Instances

Multiple node instances can share a single data directory if they have distinct instance names (set through the Name config option). Sharing behaviour depends on the type of resource.

devp2p-related resources (node key, static/trusted node lists, known hosts database) are stored in a directory with the same name as the instance. Thus, multiple node instances using the same data directory will store this information in different subdirectories of the data directory.

LevelDB databases are also stored within the instance subdirectory. If multiple node instances use the same data directory, opening the databases with identical names will create one database for each instance.

The account key store is shared among all node instances using the same data directory unless its location is changed through the KeyStoreDir configuration option.

Data Directory Sharing Example

In this example, two node instances named A and B are started with the same data directory. Node instance A opens the database "db", node instance B opens the databases "db" and "db-2". The following files will be created in the data directory: 

data-directory/
	A/
		nodekey            -- devp2p node key of instance A
		nodes/             -- devp2p discovery knowledge database of instance A
		db/                -- LevelDB content for "db"
	A.ipc                  -- JSON-RPC UNIX domain socket endpoint of instance A
	B/
		nodekey            -- devp2p node key of node B
		nodes/             -- devp2p discovery knowledge database of instance B
		static-nodes.json  -- devp2p static node list of instance B
		db/                -- LevelDB content for "db"
		db-2/              -- LevelDB content for "db-2"
	B.ipc                  -- JSON-RPC UNIX domain socket endpoint of instance B
	keystore/              -- account key store, used by both instances

Index

Examples

Constants

View Source 
const (
	DefaultHTTPHost    = "localhost" // Default host interface for the HTTP RPC server
	DefaultHTTPPort    = 8545        // Default TCP port for the HTTP RPC server
	DefaultWSHost      = "localhost" // Default host interface for the websocket RPC server
	DefaultWSPort      = 8546        // Default TCP port for the websocket RPC server
	DefaultGraphQLHost = "localhost" // Default host interface for the GraphQL server
	DefaultGraphQLPort = 8547        // Default TCP port for the GraphQL server
	DefaultAuthHost    = "localhost" // Default host interface for the authenticated apis
	DefaultAuthPort    = 8551        // Default port for the authenticated apis
)

Variables

View Source 
var (
	DefaultAuthCors    = []string{"localhost"} // Default cors domain for the authenticated apis
	DefaultAuthVhosts  = []string{"localhost"} // Default virtual hosts for the authenticated apis
	DefaultAuthOrigins = []string{"localhost"} // Default origins for the authenticated apis
	DefaultAuthPrefix  = ""                    // Default prefix for the authenticated apis
	DefaultAuthModules = []string{"eth", "engine"}
)
View Source 
var (
	ErrDatadirUsed    = errors.New("datadir already used by another process")
	ErrNodeStopped    = errors.New("node not started")
	ErrNodeRunning    = errors.New("node already running")
	ErrServiceUnknown = errors.New("unknown service")
)
View Source 
var DefaultConfig = Config{
	DataDir:             DefaultDataDir(),
	HTTPPort:            DefaultHTTPPort,
	AuthAddr:            DefaultAuthHost,
	AuthPort:            DefaultAuthPort,
	AuthVirtualHosts:    DefaultAuthVhosts,
	HTTPModules:         []string{"net", "web3"},
	HTTPVirtualHosts:    []string{"localhost"},
	HTTPTimeouts:        rpc.DefaultHTTPTimeouts,
	WSPort:              DefaultWSPort,
	WSModules:           []string{"net", "web3"},
	GraphQLVirtualHosts: []string{"localhost"},
	P2P: p2p.Config{
		ListenAddr: ":30303",
		MaxPeers:   50,
		NAT:        nat.Any(),
	},
	DBEngine: "",
}

DefaultConfig contains reasonable default settings.

Functions

func CheckTimeouts 

func CheckTimeouts(timeouts *rpc.HTTPTimeouts)

CheckTimeouts ensures that timeout values are meaningful

func DefaultDataDir 

func DefaultDataDir() string

DefaultDataDir is the default data directory to use for the databases and other persistence requirements.

func DefaultHTTPEndpoint 

func DefaultHTTPEndpoint() string

DefaultHTTPEndpoint returns the HTTP endpoint used by default.

func DefaultIPCEndpoint 

func DefaultIPCEndpoint(clientIdentifier string) string

DefaultIPCEndpoint returns the IPC path used by default.

func DefaultWSEndpoint 

func DefaultWSEndpoint() string

DefaultWSEndpoint returns the websocket endpoint used by default.

func NewHTTPHandlerStack 

func NewHTTPHandlerStack(srv http.Handler, cors []string, vhosts []string, jwtSecret []byte) http.Handler

NewHTTPHandlerStack returns wrapped http-related handlers

func NewJWTAuth added in v1.11.6 

func NewJWTAuth(jwtsecret [32]byte) rpc.HTTPAuth

NewJWTAuth creates an rpc client authentication provider that uses JWT. The secret MUST be 32 bytes (256 bits) as defined by the Engine-API authentication spec.

See github.com/tos-network/execution-apis/blob/main/src/engine/authentication.md for more details about this authentication scheme.

func NewWSHandlerStack added in v1.11.6 

func NewWSHandlerStack(srv http.Handler, jwtSecret []byte) http.Handler

NewWSHandlerStack returns a wrapped ws-related handler.

func RegisterApis added in v1.11.6 

func RegisterApis(apis []rpc.API, modules []string, srv *rpc.Server) error

RegisterApis checks the given modules' availability, generates an allowlist based on the allowed modules, and then registers all of the APIs exposed by the services.

func StartHTTPEndpoint 

func StartHTTPEndpoint(endpoint string, timeouts rpc.HTTPTimeouts, handler http.Handler) (*http.Server, net.Addr, error)

StartHTTPEndpoint starts the HTTP RPC endpoint.

Types

type Config 

type Config struct {
	// Name sets the instance name of the node. It must not contain the / character and is
	// used in the devp2p node identifier. The instance name of gtos is "gtos". If no
	// value is specified, the basename of the current executable is used.
	Name string `toml:"-"`

	// UserIdent, if set, is used as an additional component in the devp2p node identifier.
	UserIdent string `toml:",omitempty"`

	// Version should be set to the version number of the program. It is used
	// in the devp2p node identifier.
	Version string `toml:"-"`

	// DataDir is the file system folder the node should use for any data storage
	// requirements. The configured data directory will not be directly shared with
	// registered services, instead those can use utility methods to create/access
	// databases or flat files. This enables ephemeral nodes which can fully reside
	// in memory.
	DataDir string

	// Configuration of peer-to-peer networking.
	P2P p2p.Config

	// KeyStoreDir is the file system folder that contains private keys. The directory can
	// be specified as a relative path, in which case it is resolved relative to the
	// current directory.
	//
	// If KeyStoreDir is empty, the default location is the "keystore" subdirectory of
	// DataDir. If DataDir is unspecified and KeyStoreDir is empty, an ephemeral directory
	// is created by New and destroyed when the node is stopped.
	KeyStoreDir string `toml:",omitempty"`

	// ExternalSigner specifies an external URI for a clef-type signer
	ExternalSigner string `toml:",omitempty"`

	// UseLightweightKDF lowers the memory and CPU requirements of the key store
	// scrypt KDF at the expense of security.
	UseLightweightKDF bool `toml:",omitempty"`

	// InsecureUnlockAllowed allows user to unlock accounts in unsafe http environment.
	InsecureUnlockAllowed bool `toml:",omitempty"`

	// NoUSB disables hardware wallet monitoring and connectivity.
	// Deprecated: USB monitoring is disabled by default and must be enabled explicitly.
	NoUSB bool `toml:",omitempty"`

	// USB enables hardware wallet monitoring and connectivity.
	USB bool `toml:",omitempty"`

	// SmartCardDaemonPath is the path to the smartcard daemon's socket
	SmartCardDaemonPath string `toml:",omitempty"`

	// IPCPath is the requested location to place the IPC endpoint. If the path is
	// a simple file name, it is placed inside the data directory (or on the root
	// pipe path on Windows), whereas if it's a resolvable path name (absolute or
	// relative), then that specific path is enforced. An empty path disables IPC.
	IPCPath string

	// HTTPHost is the host interface on which to start the HTTP RPC server. If this
	// field is empty, no HTTP API endpoint will be started.
	HTTPHost string

	// HTTPPort is the TCP port number on which to start the HTTP RPC server. The
	// default zero value is/ valid and will pick a port number randomly (useful
	// for ephemeral nodes).
	HTTPPort int `toml:",omitempty"`

	// HTTPCors is the Cross-Origin Resource Sharing header to send to requesting
	// clients. Please be aware that CORS is a browser enforced security, it's fully
	// useless for custom HTTP clients.
	HTTPCors []string `toml:",omitempty"`

	// HTTPVirtualHosts is the list of virtual hostnames which are allowed on incoming requests.
	// This is by default {'localhost'}. Using this prevents attacks like
	// DNS rebinding, which bypasses SOP by simply masquerading as being within the same
	// origin. These attacks do not utilize CORS, since they are not cross-domain.
	// By explicitly checking the Host-header, the server will not allow requests
	// made against the server with a malicious host domain.
	// Requests using ip address directly are not affected
	HTTPVirtualHosts []string `toml:",omitempty"`

	// HTTPModules is a list of API modules to expose via the HTTP RPC interface.
	// If the module list is empty, all RPC API endpoints designated public will be
	// exposed.
	HTTPModules []string

	// HTTPTimeouts allows for customization of the timeout values used by the HTTP RPC
	// interface.
	HTTPTimeouts rpc.HTTPTimeouts

	// HTTPPathPrefix specifies a path prefix on which http-rpc is to be served.
	HTTPPathPrefix string `toml:",omitempty"`

	// AuthAddr is the listening address on which authenticated APIs are provided.
	AuthAddr string `toml:",omitempty"`

	// AuthPort is the port number on which authenticated APIs are provided.
	AuthPort int `toml:",omitempty"`

	// AuthVirtualHosts is the list of virtual hostnames which are allowed on incoming requests
	// for the authenticated api. This is by default {'localhost'}.
	AuthVirtualHosts []string `toml:",omitempty"`

	// WSHost is the host interface on which to start the websocket RPC server. If
	// this field is empty, no websocket API endpoint will be started.
	WSHost string

	// WSPort is the TCP port number on which to start the websocket RPC server. The
	// default zero value is/ valid and will pick a port number randomly (useful for
	// ephemeral nodes).
	WSPort int `toml:",omitempty"`

	// WSPathPrefix specifies a path prefix on which ws-rpc is to be served.
	WSPathPrefix string `toml:",omitempty"`

	// WSOrigins is the list of domain to accept websocket requests from. Please be
	// aware that the server can only act upon the HTTP request the client sends and
	// cannot verify the validity of the request header.
	WSOrigins []string `toml:",omitempty"`

	// WSModules is a list of API modules to expose via the websocket RPC interface.
	// If the module list is empty, all RPC API endpoints designated public will be
	// exposed.
	WSModules []string

	// WSExposeAll exposes all API modules via the WebSocket RPC interface rather
	// than just the public ones.
	//
	// *WARNING* Only set this if the node is running in a trusted network, exposing
	// private APIs to untrusted users is a major security risk.
	WSExposeAll bool `toml:",omitempty"`

	// GraphQLCors is the Cross-Origin Resource Sharing header to send to requesting
	// clients. Please be aware that CORS is a browser enforced security, it's fully
	// useless for custom HTTP clients.
	GraphQLCors []string `toml:",omitempty"`

	// GraphQLVirtualHosts is the list of virtual hostnames which are allowed on incoming requests.
	// This is by default {'localhost'}. Using this prevents attacks like
	// DNS rebinding, which bypasses SOP by simply masquerading as being within the same
	// origin. These attacks do not utilize CORS, since they are not cross-domain.
	// By explicitly checking the Host-header, the server will not allow requests
	// made against the server with a malicious host domain.
	// Requests using ip address directly are not affected
	GraphQLVirtualHosts []string `toml:",omitempty"`

	// Logger is a custom logger to use with the p2p.Server.
	Logger log.Logger `toml:",omitempty"`

	// AllowUnprotectedTxs allows non EIP-155 protected transactions to be send over RPC.
	AllowUnprotectedTxs bool `toml:",omitempty"`

	// JWTSecret is the path to the hex-encoded jwt secret.
	JWTSecret string `toml:",omitempty"`

	// EnablePersonal enables the deprecated personal namespace.
	EnablePersonal bool `toml:"-"`

	DBEngine string `toml:",omitempty"`
	// contains filtered or unexported fields
}

Config represents a small collection of configuration values to fine tune the P2P network layer of a protocol stack. These values can be further extended by all registered services.

func (*Config) ExtRPCEnabled 

func (c *Config) ExtRPCEnabled() bool

ExtRPCEnabled returns the indicator whether node enables the external RPC(http, ws or graphql).

func (*Config) HTTPEndpoint 

func (c *Config) HTTPEndpoint() string

HTTPEndpoint resolves an HTTP endpoint based on the configured host interface and port parameters.

func (*Config) IPCEndpoint 

func (c *Config) IPCEndpoint() string

IPCEndpoint resolves an IPC endpoint based on a configured value, taking into account the set data folders as well as the designated platform we're currently running on.

func (*Config) KeyDirConfig added in v1.11.6 

func (c *Config) KeyDirConfig() (string, error)

KeyDirConfig determines the settings for keydirectory

func (*Config) NodeDB 

func (c *Config) NodeDB() string

NodeDB returns the path to the discovery node database.

func (*Config) NodeKey 

func (c *Config) NodeKey() *ecdsa.PrivateKey

NodeKey retrieves the currently configured private key of the node, checking first any manually set key, falling back to the one found in the configured data folder. If no key can be found, a new one is generated.

func (*Config) NodeName 

func (c *Config) NodeName() string

NodeName returns the devp2p node identifier.

func (*Config) ResolvePath 

func (c *Config) ResolvePath(path string) string

ResolvePath resolves path in the instance directory.

func (*Config) WSEndpoint 

func (c *Config) WSEndpoint() string

WSEndpoint resolves a websocket endpoint based on the configured host interface and port parameters.

type Lifecycle 

type Lifecycle interface {
	// Start is called after all services have been constructed and the networking
	// layer was also initialized to spawn any goroutines required by the service.
	Start() error

	// Stop terminates all goroutines belonging to the service, blocking until they
	// are all terminated.
	Stop() error
}

Lifecycle encompasses the behavior of services that can be started and stopped on the node. Lifecycle management is delegated to the node, but it is the responsibility of the service-specific package to configure and register the service on the node using the `RegisterLifecycle` method.

Example 
package main

import (
	"fmt"
	"log"

	"github.com/tos-network/tos/node"
)

// SampleLifecycle is a trivial network service that can be attached to a node for
// life cycle management.
//
// The following methods are needed to implement a node.Lifecycle:
//   - Start() error              - method invoked when the node is ready to start the service
//   - Stop() error               - method invoked when the node terminates the service
type SampleLifecycle struct{}

func (s *SampleLifecycle) Start() error { fmt.Println("Service starting..."); return nil }
func (s *SampleLifecycle) Stop() error  { fmt.Println("Service stopping..."); return nil }

func main() {
	// Create a network node to run protocols with the default values.
	stack, err := node.New(&node.Config{})
	if err != nil {
		log.Fatalf("Failed to create network node: %v", err)
	}
	defer stack.Close()

	// Create and register a simple network Lifecycle.
	service := new(SampleLifecycle)
	stack.RegisterLifecycle(service)

	// Boot up the entire protocol stack, do a restart and terminate
	if err := stack.Start(); err != nil {
		log.Fatalf("Failed to start the protocol stack: %v", err)
	}
	if err := stack.Close(); err != nil {
		log.Fatalf("Failed to stop the protocol stack: %v", err)
	}
}

Output:

Service starting...
Service stopping...

type Node 

type Node struct {
	// contains filtered or unexported fields
}

Node is a container on which services can be registered.

func New 

func New(conf *Config) (*Node, error)

New creates a new P2P node, ready for protocol registration.

func (*Node) AccountManager 

func (n *Node) AccountManager() *accounts.Manager

AccountManager retrieves the account manager used by the protocol stack.

func (*Node) Attach 

func (n *Node) Attach() (*rpc.Client, error)

Attach creates an RPC client attached to an in-process API handler.

func (*Node) Close 

func (n *Node) Close() error

Close stops the Node and releases resources acquired in Node constructor New.

func (*Node) Config 

func (n *Node) Config() *Config

Config returns the configuration of node.

func (*Node) DataDir 

func (n *Node) DataDir() string

DataDir retrieves the current datadir used by the protocol stack. Deprecated: No files should be stored in this directory, use InstanceDir instead.

func (*Node) EventMux 

func (n *Node) EventMux() *event.TypeMux

EventMux retrieves the event multiplexer used by all the network services in the current protocol stack.

func (*Node) HTTPAuthEndpoint added in v1.11.6 

func (n *Node) HTTPAuthEndpoint() string

HTTPAuthEndpoint returns the URL of the authenticated HTTP server.

func (*Node) HTTPEndpoint 

func (n *Node) HTTPEndpoint() string

HTTPEndpoint returns the URL of the HTTP server. Note that this URL does not contain the JSON-RPC path prefix set by HTTPPathPrefix.

func (*Node) IPCEndpoint 

func (n *Node) IPCEndpoint() string

IPCEndpoint retrieves the current IPC endpoint used by the protocol stack.

func (*Node) InstanceDir 

func (n *Node) InstanceDir() string

InstanceDir retrieves the instance directory used by the protocol stack.

func (*Node) KeyStoreDir added in v1.11.6 

func (n *Node) KeyStoreDir() string

KeyStoreDir retrieves the key directory

func (*Node) OpenDatabase 

func (n *Node) OpenDatabase(name string, cache, handles int, namespace string, readonly bool) (ethdb.Database, error)

OpenDatabase opens an existing database with the given name (or creates one if no previous can be found) from within the node's instance directory. If the node is ephemeral, a memory database is returned.

func (*Node) OpenDatabaseWithFreezer 

func (n *Node) OpenDatabaseWithFreezer(name string, cache, handles int, ancient string, namespace string, readonly bool) (ethdb.Database, error)

OpenDatabaseWithFreezer opens an existing database with the given name (or creates one if no previous can be found) from within the node's data directory, also attaching a chain freezer to it that moves ancient chain data from the database to immutable append-only files. If the node is an ephemeral one, a memory database is returned.

func (*Node) RPCHandler 

func (n *Node) RPCHandler() (*rpc.Server, error)

RPCHandler returns the in-process RPC request handler.

func (*Node) RegisterAPIs 

func (n *Node) RegisterAPIs(apis []rpc.API)

RegisterAPIs registers the APIs a service provides on the node.

func (*Node) RegisterHandler 

func (n *Node) RegisterHandler(name, path string, handler http.Handler)

RegisterHandler mounts a handler on the given path on the canonical HTTP server.

The name of the handler is shown in a log message when the HTTP server starts and should be a descriptive term for the service provided by the handler.

func (*Node) RegisterLifecycle 

func (n *Node) RegisterLifecycle(lifecycle Lifecycle)

RegisterLifecycle registers the given Lifecycle on the node.

func (*Node) RegisterProtocols 

func (n *Node) RegisterProtocols(protocols []p2p.Protocol)

RegisterProtocols adds backend's protocols to the node's p2p server.

func (*Node) ResolveAncient added in v1.11.6 

func (n *Node) ResolveAncient(name string, ancient string) string

ResolveAncient returns the absolute path of the root ancient directory.

func (*Node) ResolvePath 

func (n *Node) ResolvePath(x string) string

ResolvePath returns the absolute path of a resource in the instance directory.

func (*Node) Server 

func (n *Node) Server() *p2p.Server

Server retrieves the currently running P2P network layer. This method is meant only to inspect fields of the currently running server. Callers should not start or stop the returned server.

func (*Node) Start 

func (n *Node) Start() error

Start starts all registered lifecycles, RPC services and p2p networking. Node can only be started once.

func (*Node) WSAuthEndpoint added in v1.11.6 

func (n *Node) WSAuthEndpoint() string

WSAuthEndpoint returns the current authenticated JSON-RPC over WebSocket endpoint.

func (*Node) WSEndpoint 

func (n *Node) WSEndpoint() string

WSEndpoint returns the current JSON-RPC over WebSocket endpoint.

func (*Node) Wait 

func (n *Node) Wait()

Wait blocks until the node is closed.

type StopError 

type StopError struct {
	Server   error
	Services map[reflect.Type]error
}

StopError is returned if a Node fails to stop either any of its registered services or itself.

func (*StopError) Error 

func (e *StopError) Error() string

Error generates a textual representation of the stop error.

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.