goakt

README

Go-Akt

Distributed Go actor framework to build reactive and distributed system in golang using protocol buffers as actor messages.

GoAkt is highly scalable and available when running in cluster mode. It comes with the necessary features require to build a distributed actor-based system without sacrificing performance and reliability. With GoAkt, you can instantly create a fast, scalable, distributed system across a cluster of computers.

If you are not familiar with the actor model, the blog post from Brian Storti here is an excellent and short introduction to the actor model. Also, check reference section at the end of the post for more material regarding actor model.

The project adheres to Semantic Versioning and Conventional Commits.

Table of Content

• Design Principles
• Use Cases
• Installation
• Examples
• Features
  • Actors
  • Passivation
  • Actor System
  • Behaviors
  • Mailbox
  • Events Stream
    • Supported events
  • Messaging
  • Scheduler
    • Cron Expression Format
    • Note
  • Stashing
  • Remoting
  • Cluster
  • Observability
    • Tracing
    • Metrics
    • Logging
  • Testkit
• API
• Client
  • Balancer strategies
  • Features
• Clustering
  • Operations Guide
  • Redeployment
  • Built-in Discovery Providers
    • Kubernetes Discovery Provider Setup
      • Get Started
      • Role Based Access
    • mDNS Discovery Provider Setup
    • NATS Discovery Provider Setup
    • DNS Provider Setup
    • Static Provider Setup
• Contribution
  • Test & Linter
• Benchmark

Design Principles

This framework has been designed:

• to be very simple - it caters for the core component of an actor framework as stated by the father of the actor framework here.
• to be very easy to use.
• to have a clear and defined contract for messages - no need to implement/hide any sort of serialization.
• to make use existing battle-tested libraries in the go ecosystem - no need to reinvent solved problems.
• to be very fast.
• to expose interfaces for custom integrations rather than making it convoluted with unnecessary features.

Use Cases

• Event-Driven programming
• Event Sourcing and CQRS - eGo
• Highly Available, Fault-Tolerant Distributed Systems

Installation

go get github.com/tochemey/goakt/v2

Examples

Kindly check out the examples' repository.

Features

Actors

The fundamental building blocks of Go-Akt are actors.

• They are independent, isolated unit of computation with their own state.
• They can be long-lived actors or be passivated after some period of time that is configured during their creation. Use this feature with care when dealing with persistent actors (actors that require their state to be persisted).
• They are automatically thread-safe without having to use locks or any other shared-memory synchronization mechanisms.
• They can be stateful and stateless depending upon the system to build.
• Every actor in Go-Akt:
  • has a process id PID. Via the process id any allowable action can be executed by the actor.
  • has a lifecycle via the following methods: PreStart, PostStop. It means it can live and die like any other process.
  • handles and responds to messages via the method Receive. While handling messages it can:
  • create other (child) actors via their process id PID SpawnChild method
  • send messages to other actors locally or remotely via their process id PID Ask, RemoteAsk(request/response fashion) and Tell, RemoteTell(fire-and-forget fashion) methods
  • stop (child) actors via their process id PID
  • watch/unwatch (child) actors via their process id PID Watch and UnWatch methods
  • supervise the failure behavior of (child) actors. The supervisory strategy to adopt is set during its creation:
  • Restart and Stop directive are supported at the moment.
  • remotely lookup for an actor on another node via their process id PID RemoteLookup. This allows it to send messages remotely via RemoteAsk or RemoteTell methods
  • stash/unstash messages. See Stashing
  • can adopt various form using the Behavior feature
  • can be restarted (respawned)
  • can be gracefully stopped (killed). Every message in the mailbox prior to stoppage will be processed within a configurable time period.

Passivation

Actors can be passivated when they are idle after some period of time. Passivated actors are removed from the actor system to free-up resources. When cluster mode is enabled, passivated actors are removed from the entire cluster. To bring back such actors to live, one needs to Spawn them again. By default, all actors are passivated and the passivation time is two minutes.

• To enable passivation use the actor system option WithExpireActorAfter(duration time.Duration) when creating the actor system. See actor system options.
• To disable passivation use the actor system option WithPassivationDisabled when creating the actor system. See actor system options.

Actor System

Without an actor system, it is not possible to create actors in Go-Akt. Only a single actor system is recommended to be created per application when using Go-Akt. At the moment the single instance is not enforced in Go-Akt, this simple implementation is left to the discretion of the developer. To create an actor system one just need to use the NewActorSystem method with the various Options. Go-Akt ActorSystem has the following characteristics:

• Actors lifecycle management (Spawn, Kill, ReSpawn)
• Concurrency and Parallelism - Multiple actors can be managed and execute their tasks independently and concurrently. This helps utilize multicore processors efficiently.
• Location Transparency - The physical location of actors is abstracted. Remote actors can be accessed via their address once remoting is enabled.
• Fault Tolerance and Supervision - Set during the creation of the actor system.
• Actor Addressing - Every actor in the ActorSystem has an address.

Behaviors

Actors in Go-Akt have the power to switch their behaviors at any point in time. When you change the actor behavior, the new behavior will take effect for all subsequent messages until the behavior is changed again. The current message will continue processing with the existing behavior. You can use Stashing to reprocess the current message with the new behavior.

To change the behavior, call the following methods on the ReceiveContext interface when handling a message:

• Become - switches the current behavior of the actor to a new behavior.
• UnBecome - resets the actor behavior to the default one which is the Actor.Receive method.
• BecomeStacked - sets a new behavior to the actor to the top of the behavior stack, while maintaining the previous ones.
• UnBecomeStacked() - sets the actor behavior to the previous behavior before BecomeStacked() was called. This only works with BecomeStacked().

Mailbox

Once can implement a custom mailbox. See Mailbox. The default mailbox makes use of buffered channels.

Events Stream

To receive some system events and act on them for some particular business cases, you just need to call the actor system Subscribe. Make sure to Unsubscribe whenever the subscription is no longer needed to free allocated resources. The subscription methods can be found on the ActorSystem interface.

Supported events

• ActorStarted: emitted when an actor has started
• ActorStopped: emitted when an actor has stopped
• ActorPassivated: emitted when an actor is passivated
• ActorChildCreated: emitted when a child actor is created
• ActorRestarted: emitted when an actor has restarted
• NodeJoined: cluster event emitted when a node joins the cluster. This only happens when cluster mode is enabled
• NodeLeft: cluster event emitted when a node leaves the cluster. This only happens when cluster mode is enabled
• Deadletter: emitted when a message cannot be delivered or that were not handled by a given actor. Dead letters are automatically emitted when a message cannot be delivered to actors' mailbox or when an Ask times out. Also, one can emit dead letters from the receiving actor by using the ctx.Unhandled() method. This is useful instead of panicking when the receiving actor does not know how to handle a particular message. Dead letters are not propagated over the network, there are tied to the local actor system.

Messaging

Communication between actors is achieved exclusively through message passing. In Go-Akt Google Protocol Buffers is used to define messages. The choice of protobuf is due to easy serialization over wire and strong schema definition. As stated previously the following messaging patterns are supported:

• Tell/RemoteTell - send a message to an actor and forget it
• Ask/RemoteAsk - send a message to an actor and expect a reply within a time period
• Forward - pass a message from one actor to the actor by preserving the initial sender of the message. At the moment you can only forward messages from the ReceiveContext when handling a message within an actor and this to a local actor.
• BatchTell - send a bulk of messages to actor in a fire-forget manner. Messages are processed one after the other in the other they have been sent.
• BatchAsk - send a bulk of messages to an actor and expect responses for each message sent within a time period. Messages are processed one after the other in the other they were sent. This help return the response of each message in the same order that message was sent. This method hinders performance drastically when the number of messages to sent is high. Kindly use this method with caution.
• PipeTo - send the successful result of a future(long-running task) to self or a given actor. This can be achieved from the PID as well as from the ReceiveContext

Scheduler

You can schedule sending messages to actor that will be acted upon in the future. To achieve that you can use the following methods on the Actor System:

• ScheduleOnce - will send the given message to a local actor after a given interval
• RemoteScheduleOnce - will send the given message to a remote actor after a given interval. This requires remoting to be enabled on the actor system.
• ScheduleWithCron - will send the given message to a local actor using a cron expression.
• RemoteScheduleWithCron - will send the given message to a remote actor using a cron expression. This requires remoting to be enabled on the actor system.

Cron Expression Format

Field	Required	Allowed Values	Allowed Special Characters
Seconds	yes	0-59	, - * /
Minutes	yes	0-59	, - * /
Hours	yes	0-23	, - * /
Day of month	yes	1-31	, - * ? /
Month	yes	1-12 or JAN-DEC	, - * /
Day of week	yes	1-7 or SUN-SAT	, - * ? /
Year	no	empty, 1970-	, - * /

Note

When running the actor system in a cluster only one instance of a given scheduled message will be running across the entire cluster.

Stashing

Stashing is a mechanism you can enable in your actors, so they can temporarily stash away messages they cannot or should not handle at the moment. Another way to see it is that stashing allows you to keep processing messages you can handle while saving for later messages you can't. Stashing are handled by Go-Akt out of the actor instance just like the mailbox, so if the actor dies while processing a message, all messages in the stash are processed. This feature is usually used together with Become/UnBecome, as they fit together very well, but this is not a requirement.

It’s recommended to avoid stashing too many messages to avoid too much memory usage. If you try to stash more messages than the capacity the actor will panic. To use the stashing feature, call the following methods on the ReceiveContext when handling a message:

• Stash() - adds the current message to the stash buffer.
• Unstash() - unstashes the oldest message in the stash and prepends to the stash buffer.
• UnstashAll() - unstashes all messages from the stash buffer and prepends in the mailbox. Messages will be processed in the same order they arrived. The stash buffer will be empty after processing all messages, unless an exception is thrown or messages are stashed while unstashing.

Remoting

This allows remote actors to communicate. The underlying technology is gRPC. To enable remoting just use the WithRemoting option when creating the actor system. See actor system options. These are the following remoting features available:

• RemoteTell: to send a fire-and-forget message to an actor remotely
• RemoteAsk: to send a request/response type of message to a remote actor
• RemoteBatchTell: to send a fire-and-forget bulk of messages to a remote actor
• RemoteBatchAsk: to send a bulk messages to a remote actor with replies
• RemoteLookup: to lookup for an actor on a remote host
• RemoteReSpawn: to restarts an actor on a remote machine
• RemoteStop: to stop an actor on a remote machine
• RemoteSpawn: to start an actor on a remote machine. The given actor implementation must be registered using the Register method of the actor system on the remote machine for this call to succeed.

These methods can be used from the API as well as from the PID which is the actor reference when an actor is created.

Cluster

This offers simple scalability, partitioning (sharding), and re-balancing out-of-the-box. Go-Akt nodes are automatically discovered. See Clustering. Beware that at the moment, within the cluster the existence of an actor is unique.

Observability

Observability is key in distributed system. It helps to understand and track the performance of a system. Go-Akt offers out of the box features that can help track, monitor and measure the performance of a Go-Akt based system.

Tracing

One can enable/disable tracing on a Go-Akt actor system to instrument and measure the performance of some of the methods. Go-Akt uses under the hood OpenTelemetry to instrument a system. One just need to use the WithTracing option when instantiating a Go-Akt actor system and use the default Telemetry engine or set a custom one with WithTelemetry option of the actor system.

Metrics

One can enable/disable metrics on a Go-Akt actor system to collect the following metrics:

• Actor Metrics:
  • Number of children
  • Number of messages stashed
  • Number of Restarts
  • Last message received processing latency in milliseconds
• System Metrics:
  • Total Number of Actors

Go-Akt uses under the hood OpenTelemetry to instrument a system. One just need to use the WithMetric option when instantiating a Go-Akt actor system and use the default Telemetry engine or set a custom one with WithTelemetry option of the actor system.

Logging

A simple logging interface to allow custom logger to be implemented instead of using the default logger.

Testkit

Go-Akt comes packaged with a testkit that can help test that actors receive expected messages within unit tests. To test that an actor receive and respond to messages one will have to:

1. Create an instance of the testkit: testkit := New(ctx, t) where ctx is a go context and t the instance of *testing.T. This can be done in setup before the run of each test.
2. Create the instance of the actor under test. Example: pinger := testkit.Spawn(ctx, "pinger", &pinger{})
3. Create an instance of test probe: probe := testkit.NewProbe(ctx) where ctx is a go context
4. Use the probe to send a message to the actor under test. Example: probe.Send(pinger, new(testpb.Ping))
5. Assert that the actor under test has received the message and responded as expected using the probe methods:

• ExpectMessage(message proto.Message) proto.Message: asserts that the message received from the test actor is the expected one
• ExpectMessageWithin(duration time.Duration, message proto.Message) proto.Message: asserts that the message received from the test actor is the expected one within a time duration
• ExpectNoMessage(): asserts that no message is expected
• ExpectAnyMessage() proto.Message: asserts that any message is expected
• ExpectAnyMessageWithin(duration time.Duration) proto.Message: asserts that any message within a time duration
• ExpectMessageOfType(messageType protoreflect.MessageType): asserts the expectation of a given message type
• ExpectMessageOfTypeWithin(duration time.Duration, messageType protoreflect.MessageType): asserts the expectation of a given message type within a time duration

1. Make sure to shut down the testkit and the probe. Example: probe.Stop(), testkit.Shutdown(ctx) where ctx is a go context. These two calls can be in a tear down after all tests run.

To help implement unit tests in GoAkt-based applications. See Testkit

API

The API interface helps interact with a Go-Akt actor system as kind of client. The following features are available:

• Tell: to send a message to an actor in a fire-and-forget manner
• Ask: to send a message to an actor and expect a response within a given timeout
• BatchAsk: to send a batch of requests to an actore remotely and expect responses back for each request.
• BatchTell: to send a batch of fire-and-forget messages to an actor remotely
• RemoteTell: to send a fire-and-forget message to an actor remotely
• RemoteAsk: to send a request/response type of message to a remote actor
• RemoteBatchTell: to send a fire-and-forget bulk of messages to a remote actor
• RemoteBatchAsk: to send a bulk messages to a remote actor with replies
• RemoteLookup: to lookup for an actor on a remote host
• RemoteReSpawn: to restarts an actor on a remote machine
• RemoteStop: to stop an actor on a remote machine
• RemoteSpawn: to start an actor on a remote machine. The given actor implementation must be registered using the Register method of the actor system on the remote machine for this call to succeed.

Client

The Go-Akt client facilitates interaction with a specified Go-Akt cluster, contingent upon the activation of cluster mode. The client operates without knowledge of the specific node within the cluster that will process the request. This feature is particularly beneficial when interfacing with a Go-Akt cluster from an external system. Go-Akt client is equipped with a mini load-balancer that helps route requests to the appropriate node.

Balancer strategies

• Round Robin - a given node is chosen using the round-robin strategy
• Random - a given node is chosen randomly
• Least Load - the node with the least number of actors is chosen

Features

• Kinds - to list all the actor kinds in the cluster
• Spawn - to spawn an actor in the cluster
• SpawnWithBalancer - to spawn an actor in the cluster with a given balancer strategy
• Stop - to kill/stop an actor in the cluster
• Ask - to send a message to a given actor in the cluster and expect a response
• Tell - to send a fire-forget message to a given actor in the cluster
• Whereis - to locate and get the address of a given actor
• ReSpawn - to restart a given actor

Clustering

The cluster engine depends upon the discovery mechanism to find other nodes in the cluster. Under the hood, it leverages Olric to scale out and guarantee performant, reliable persistence, simple scalability, partitioning (sharding), and re-balancing out-of-the-box. It requires remoting to be enabled.

At the moment the following providers are implemented:

• kubernetes api integration is fully functional
• mDNS and DNS-SD
• NATS integration is fully functional
• DNS is fully functional
• Static is fully functional and for demo purpose

Note: One can add additional discovery providers using the following discovery provider.

Operations Guide

The following outlines the cluster mode operations which can help have a healthy GoAkt cluster:

• One can start a single node cluster or a multiple nodes cluster.
• One can add more nodes to the cluster which will automatically discover the cluster.
• One can remove nodes. However, to avoid losing data, one need to scale down the cluster to the minimum number of nodes which started the cluster.

Redeployment

When a node leaves the cluster, as long as the cluster quorum is stable, its actors are redeployed on the remaining nodes of the cluster. The redeployed actors are created with their initial state. To be able to recover from their current state before the cluster topology change, one needs to persist their state into a distributed storage and recover from there using the PreStart hook.

Built-in Discovery Providers

Kubernetes Discovery Provider Setup

To get the kubernetes discovery working as expected, the following pod labels need to be set:

• app.kubernetes.io/part-of: set this label with the actor system name
• app.kubernetes.io/component: set this label with the application name
• app.kubernetes.io/name: set this label with the application name

Get Started

package main

import "github.com/tochemey/goakt/v2/discovery/kubernetes"

const (
    namespace          = "default"
    applicationName    = "accounts"
    actorSystemName    = "AccountsSystem"
    gossipPortName     = "gossip-port"
    peersPortName      = "peers-port"
    remotingPortName   = "remoting-port"
)

// define the discovery config
config := kubernetes.Config{
    ApplicationName:  applicationName,
    ActorSystemName:  actorSystemName,
    Namespace:        namespace,
    GossipPortName:   gossipPortName,
    RemotingPortName: remotingPortName,
    PeersPortName:  peersPortName,
}

// instantiate the k8 discovery provider
disco := kubernetes.NewDiscovery(&config)

// pass the service discovery when enabling cluster mode in the actor system

Role Based Access

You’ll also have to grant the Service Account that your pods run under access to list pods. The following configuration can be used as a starting point. It creates a Role, pod-reader, which grants access to query pod information. It then binds the default Service Account to the Role by creating a RoleBinding. Adjust as necessary:

kind: Role
apiVersion: rbac.authorization.k8s.io/v1
metadata:
  name: pod-reader
rules:
  - apiGroups: [""] # "" indicates the core API group
    resources: ["pods"]
    verbs: ["get", "watch", "list"]
---
kind: RoleBinding
apiVersion: rbac.authorization.k8s.io/v1
metadata:
  name: read-pods
subjects:
  # Uses the default service account. Consider creating a new one.
  - kind: ServiceAccount
    name: default
roleRef:
  kind: Role
  name: pod-reader
  apiGroup: rbac.authorization.k8s.io

A working example can be found here

mDNS Discovery Provider Setup

• Service Name: the service name
• Domain: The mDNS discovery domain
• Port: The mDNS discovery port
• IPv6: States whether to lookup for IPv6 addresses.

NATS Discovery Provider Setup

To use the NATS discovery provider one needs to provide the following:

• NATS Server Address: the NATS Server address
• NATS Subject: the NATS subject to use
• Actor System Name: the actor system name
• Application Name: the application name

package main

import "github.com/tochemey/goakt/v2/discovery/nats"

const (
    natsServerAddr   = "nats://localhost:4248"
    natsSubject      = "goakt-gossip"
    applicationName  = "accounts"
    actorSystemName  = "AccountsSystem"
)

// define the discovery options
config := nats.Config{
    ApplicationName: applicationName,
    ActorSystemName: actorSystemName,
    NatsServer:      natsServer,
    NatsSubject:     natsSubject,
}

// define the host node instance
hostNode := discovery.Node{}

// instantiate the NATS discovery provider by passing the config and the hostNode
disco := nats.NewDiscovery(&config, &hostNode)

// pass the service discovery when enabling cluster mode in the actor system

DNS Provider Setup

This provider performs nodes discovery based upon the domain name provided. This is very useful when doing local development using docker.

To use the DNS discovery provider one needs to provide the following:

• Domain Name: the domain name
• IPv6: States whether to lookup for IPv6 addresses.

package main

import "github.com/tochemey/goakt/v2/discovery/dnssd"

const domainName = "accounts"

// define the discovery options
config := dnssd.Config{
    dnssd.DomainName: domainName,
    dnssd.IPv6:       false,
}
// instantiate the dnssd discovery provider
disco := dnssd.NewDiscovery(&config)

// pass the service discovery when enabling cluster mode in the actor system

A working example can be found here

Static Provider Setup

This provider performs nodes discovery based upon the list of static hosts addresses. The address of each host is the form of host:port where port is the gossip protocol port.

package main

import "github.com/tochemey/goakt/v2/discovery/static"

// define the discovery configuration
config := static.Config{
    Hosts: []string{
    "node1:3322",
    "node2:3322",
    "node3:3322",
    },
}
// instantiate the dnssd discovery provider
disco := static.NewDiscovery(&config)

// pass the service discovery when enabling cluster mode in the actor system

A working example can be found here

Contribution

Contributions are welcome! The project adheres to Semantic Versioning and Conventional Commits. This repo uses Earthly.

To contribute please:

• Fork the repository
• Create a feature branch
• Submit a pull request

Test & Linter

Prior to submitting a pull request, please run:

earthly +test

Benchmark

One can run the benchmark test: go test -bench=. -benchtime 2s -count 5 -benchmem -cpu 8 -run notest from the bench package or just run the command make bench.