tofu

package
v1.0.0-rc5 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Sep 2, 2024 License: MPL-2.0 Imports: 48 Imported by: 0

Documentation

Index

Constants

This section is empty.

Variables

View Source 
var DefaultPlanOpts = &PlanOpts{
	Mode: plans.NormalMode,
}
View Source 
var EvalDataForNoInstanceKey = InstanceKeyEvalData{}

EvalDataForNoInstanceKey is a value of InstanceKeyData that sets no instance key values at all, suitable for use in contexts where no keyed instance is relevant.

Functions

func CheckCoreVersionRequirements 

func CheckCoreVersionRequirements(config *configs.Config) tfdiags.Diagnostics

CheckCoreVersionRequirements visits each of the modules in the given configuration tree and verifies that any given Core version constraints match with the version of OpenTofu Core that is being used.

The returned diagnostics will contain errors if any constraints do not match. The returned diagnostics might also return warnings, which should be displayed to the user.

func GraphDot 

func GraphDot(g *Graph, opts *dag.DotOpts) (string, error)

GraphDot returns the dot formatting of a visual representation of the given OpenTofu graph.

func ReferencesFromConfig 

func ReferencesFromConfig(body hcl.Body, schema *configschema.Block) []*addrs.Reference

ReferencesFromConfig returns the references that a configuration has based on the interpolated variables in a configuration.

Types

type ApplyGraphBuilder 

type ApplyGraphBuilder struct {
	// Config is the configuration tree that the diff was built from.
	Config *configs.Config

	// Changes describes the changes that we need apply.
	Changes *plans.Changes

	// State is the current state
	State *states.State

	// RootVariableValues are the root module input variables captured as
	// part of the plan object, which we must reproduce in the apply step
	// to get a consistent result.
	RootVariableValues InputValues

	// Plugins is a library of the plug-in components (providers and
	// provisioners) available for use.
	Plugins *contextPlugins

	// Targets are resources to target. This is only required to make sure
	// unnecessary outputs aren't included in the apply graph. The plan
	// builder successfully handles targeting resources. In the future,
	// outputs should go into the diff so that this is unnecessary.
	Targets []addrs.Targetable

	// ForceReplace are the resource instance addresses that the user
	// requested to force replacement for when creating the plan, if any.
	// The apply step refers to these as part of verifying that the planned
	// actions remain consistent between plan and apply.
	ForceReplace []addrs.AbsResourceInstance

	// Plan Operation this graph will be used for.
	Operation walkOperation

	// ExternalReferences allows the external caller to pass in references to
	// nodes that should not be pruned even if they are not referenced within
	// the actual graph.
	ExternalReferences []*addrs.Reference
}

ApplyGraphBuilder implements GraphBuilder and is responsible for building a graph for applying a OpenTofu diff.

Because the graph is built from the diff (vs. the config or state), this helps ensure that the apply-time graph doesn't modify any resources that aren't explicitly in the diff. There are other scenarios where the diff can be deviated, so this is just one layer of protection.

func (*ApplyGraphBuilder) Build 

func (b *ApplyGraphBuilder) Build(path addrs.ModuleInstance) (*Graph, tfdiags.Diagnostics)

See GraphBuilder

func (*ApplyGraphBuilder) Steps 

func (b *ApplyGraphBuilder) Steps() []GraphTransformer

See GraphBuilder

type AttachDependenciesTransformer 

type AttachDependenciesTransformer struct {
}

AttachDependenciesTransformer records all resource dependencies for each instance, and attaches the addresses to the node itself. Managed resource will record these in the state for proper ordering of destroy operations.

func (AttachDependenciesTransformer) Transform 

func (t AttachDependenciesTransformer) Transform(g *Graph) error

type AttachResourceConfigTransformer 

type AttachResourceConfigTransformer struct {
	Config *configs.Config // Config is the root node in the config tree
}

AttachResourceConfigTransformer goes through the graph and attaches resource configuration structures to nodes that implement GraphNodeAttachManagedResourceConfig or GraphNodeAttachDataResourceConfig.

The attached configuration structures are directly from the configuration. If they're going to be modified, a copy should be made.

func (*AttachResourceConfigTransformer) Transform 

func (t *AttachResourceConfigTransformer) Transform(g *Graph) error

type AttachSchemaTransformer 

type AttachSchemaTransformer struct {
	Plugins *contextPlugins
	Config  *configs.Config
}

AttachSchemaTransformer finds nodes that implement GraphNodeAttachResourceSchema, GraphNodeAttachProviderConfigSchema, or GraphNodeAttachProvisionerSchema, looks up the needed schemas for each and then passes them to a method implemented by the node.

func (*AttachSchemaTransformer) Transform 

func (t *AttachSchemaTransformer) Transform(g *Graph) error

type AttachStateTransformer 

type AttachStateTransformer struct {
	State *states.State // State is the root state
}

AttachStateTransformer goes through the graph and attaches state to nodes that implement the interfaces above.

func (*AttachStateTransformer) Transform 

func (t *AttachStateTransformer) Transform(g *Graph) error

type BasicGraphBuilder 

type BasicGraphBuilder struct {
	Steps []GraphTransformer
	// Optional name to add to the graph debug log
	Name string
}

BasicGraphBuilder is a GraphBuilder that builds a graph out of a series of transforms and (optionally) validates the graph is a valid structure.

func (*BasicGraphBuilder) Build 

func (b *BasicGraphBuilder) Build(path addrs.ModuleInstance) (*Graph, tfdiags.Diagnostics)

type BuiltinEvalContext 

type BuiltinEvalContext struct {
	// StopContext is the context used to track whether we're complete
	StopContext context.Context

	// PathValue is the Path that this context is operating within.
	PathValue addrs.ModuleInstance

	// Evaluator is used for evaluating expressions within the scope of this
	// eval context.
	Evaluator *Evaluator

	VariableValuesLock *sync.Mutex
	// VariableValues contains the variable values across all modules. This
	// structure is shared across the entire containing context, and so it
	// may be accessed only when holding VariableValuesLock.
	// The keys of the first level of VariableValues are the string
	// representations of addrs.ModuleInstance values. The second-level keys
	// are variable names within each module instance.
	VariableValues map[string]map[string]cty.Value

	// Plugins is a library of plugin components (providers and provisioners)
	// available for use during a graph walk.
	Plugins *contextPlugins

	Hooks      []Hook
	InputValue UIInput

	ProviderLock        *sync.Mutex
	ProviderCache       map[string]providers.Interface
	ProviderInputConfig map[string]map[string]cty.Value

	ProvisionerLock  *sync.Mutex
	ProvisionerCache map[string]provisioners.Interface

	ChangesValue          *plans.ChangesSync
	StateValue            *states.SyncState
	ChecksValue           *checks.State
	RefreshStateValue     *states.SyncState
	PrevRunStateValue     *states.SyncState
	InstanceExpanderValue *instances.Expander
	MoveResultsValue      refactoring.MoveResults
	ImportResolverValue   *ImportResolver
	Encryption            encryption.Encryption
	// contains filtered or unexported fields
}

BuiltinEvalContext is an EvalContext implementation that is used by OpenTofu by default.

func (*BuiltinEvalContext) Changes 

func (ctx *BuiltinEvalContext) Changes() *plans.ChangesSync

func (*BuiltinEvalContext) Checks 

func (ctx *BuiltinEvalContext) Checks() *checks.State

func (*BuiltinEvalContext) CloseProvider 

func (ctx *BuiltinEvalContext) CloseProvider(addr addrs.AbsProviderConfig) error

func (*BuiltinEvalContext) CloseProvisioners 

func (ctx *BuiltinEvalContext) CloseProvisioners() error

func (*BuiltinEvalContext) ConfigureProvider 

func (ctx *BuiltinEvalContext) ConfigureProvider(addr addrs.AbsProviderConfig, cfg cty.Value) tfdiags.Diagnostics

func (*BuiltinEvalContext) EvaluateBlock 

func (ctx *BuiltinEvalContext) EvaluateBlock(body hcl.Body, schema *configschema.Block, self addrs.Referenceable, keyData InstanceKeyEvalData) (cty.Value, hcl.Body, tfdiags.Diagnostics)

func (*BuiltinEvalContext) EvaluateExpr 

func (ctx *BuiltinEvalContext) EvaluateExpr(expr hcl.Expression, wantType cty.Type, self addrs.Referenceable) (cty.Value, tfdiags.Diagnostics)

func (*BuiltinEvalContext) EvaluateReplaceTriggeredBy 

func (ctx *BuiltinEvalContext) EvaluateReplaceTriggeredBy(expr hcl.Expression, repData instances.RepetitionData) (*addrs.Reference, bool, tfdiags.Diagnostics)

func (*BuiltinEvalContext) EvaluationScope 

func (ctx *BuiltinEvalContext) EvaluationScope(self addrs.Referenceable, source addrs.Referenceable, keyData InstanceKeyEvalData) *lang.Scope

func (*BuiltinEvalContext) GetEncryption 

func (ctx *BuiltinEvalContext) GetEncryption() encryption.Encryption

func (*BuiltinEvalContext) GetVariableValue 

func (ctx *BuiltinEvalContext) GetVariableValue(addr addrs.AbsInputVariableInstance) cty.Value

func (*BuiltinEvalContext) Hook 

func (ctx *BuiltinEvalContext) Hook(fn func(Hook) (HookAction, error)) error

func (*BuiltinEvalContext) ImportResolver 

func (ctx *BuiltinEvalContext) ImportResolver() *ImportResolver

func (*BuiltinEvalContext) InitProvider 

func (ctx *BuiltinEvalContext) InitProvider(addr addrs.AbsProviderConfig) (providers.Interface, error)

func (*BuiltinEvalContext) Input 

func (ctx *BuiltinEvalContext) Input() UIInput

func (*BuiltinEvalContext) InstanceExpander 

func (ctx *BuiltinEvalContext) InstanceExpander() *instances.Expander

func (*BuiltinEvalContext) MoveResults 

func (ctx *BuiltinEvalContext) MoveResults() refactoring.MoveResults

func (*BuiltinEvalContext) Path 

func (ctx *BuiltinEvalContext) Path() addrs.ModuleInstance

func (*BuiltinEvalContext) PrevRunState 

func (ctx *BuiltinEvalContext) PrevRunState() *states.SyncState

func (*BuiltinEvalContext) Provider 

func (ctx *BuiltinEvalContext) Provider(addr addrs.AbsProviderConfig) providers.Interface

func (*BuiltinEvalContext) ProviderInput 

func (ctx *BuiltinEvalContext) ProviderInput(pc addrs.AbsProviderConfig) map[string]cty.Value

func (*BuiltinEvalContext) ProviderSchema 

func (ctx *BuiltinEvalContext) ProviderSchema(addr addrs.AbsProviderConfig) (providers.ProviderSchema, error)

func (*BuiltinEvalContext) Provisioner 

func (ctx *BuiltinEvalContext) Provisioner(n string) (provisioners.Interface, error)

func (*BuiltinEvalContext) ProvisionerSchema 

func (ctx *BuiltinEvalContext) ProvisionerSchema(n string) (*configschema.Block, error)

func (*BuiltinEvalContext) RefreshState 

func (ctx *BuiltinEvalContext) RefreshState() *states.SyncState

func (*BuiltinEvalContext) SetModuleCallArgument 

func (ctx *BuiltinEvalContext) SetModuleCallArgument(callAddr addrs.ModuleCallInstance, varAddr addrs.InputVariable, v cty.Value)

func (*BuiltinEvalContext) SetProviderInput 

func (ctx *BuiltinEvalContext) SetProviderInput(pc addrs.AbsProviderConfig, c map[string]cty.Value)

func (*BuiltinEvalContext) SetRootModuleArgument 

func (ctx *BuiltinEvalContext) SetRootModuleArgument(addr addrs.InputVariable, v cty.Value)

func (*BuiltinEvalContext) State 

func (ctx *BuiltinEvalContext) State() *states.SyncState

func (*BuiltinEvalContext) Stopped 

func (ctx *BuiltinEvalContext) Stopped() <-chan struct{}

func (*BuiltinEvalContext) WithPath 

func (ctx *BuiltinEvalContext) WithPath(path addrs.ModuleInstance) EvalContext

type CBDEdgeTransformer 

type CBDEdgeTransformer struct {
	// Module and State are only needed to look up dependencies in
	// any way possible. Either can be nil if not availabile.
	Config *configs.Config
	State  *states.State
}

CBDEdgeTransformer modifies the edges of create-before-destroy ("CBD") nodes that went through the DestroyEdgeTransformer so that they will have the correct dependencies. There are two parts to this:

  1. With CBD, the destroy edge is inverted: the destroy depends on the creation.

  2. Destroy for A must depend on resources that depend on A. This is to allow the destroy to only happen once nodes that depend on A successfully update to A. Example: adding a web server updates the load balancer before deleting the old web server.

This transformer requires that a previous transformer has already forced create_before_destroy on for nodes that are depended on by explicit CBD nodes. This is the logic in ForcedCBDTransformer, though in practice we will get here by recording the CBD-ness of each change in the plan during the plan walk and then forcing the nodes into the appropriate setting during DiffTransformer when building the apply graph.

func (*CBDEdgeTransformer) Transform 

func (t *CBDEdgeTransformer) Transform(g *Graph) error

type CallbackUIOutput 

type CallbackUIOutput struct {
	OutputFn func(string)
}

func (*CallbackUIOutput) Output 

func (o *CallbackUIOutput) Output(v string)

type CloseProviderTransformer 

type CloseProviderTransformer struct{}

CloseProviderTransformer is a GraphTransformer that adds nodes to the graph that will close open provider connections that aren't needed anymore. A provider connection is not needed anymore once all depended resources in the graph are evaluated.

func (*CloseProviderTransformer) Transform 

func (t *CloseProviderTransformer) Transform(g *Graph) error

type CloseRootModuleTransformer 

type CloseRootModuleTransformer struct {
	RootConfig *configs.Config
}

CloseRootModuleTransformer is a GraphTransformer that adds a root to the graph.

func (*CloseRootModuleTransformer) Transform 

func (t *CloseRootModuleTransformer) Transform(g *Graph) error

type CommandLineImportTarget 

type CommandLineImportTarget struct {
	// Addr is the address for the resource instance that the new object should
	// be imported into.
	Addr addrs.AbsResourceInstance

	// ID is the string ID of the resource to import. This is resource-specific.
	ID string
}

CommandLineImportTarget is a target that we need to import, that originated from the CLI command It represents a single resource that we need to import. The resource's ID and Address are fully known when executing the command (unlike when using the `import` block)

type ConcreteModuleNodeFunc 

type ConcreteModuleNodeFunc func(n *nodeExpandModule) dag.Vertex

type ConcreteProviderNodeFunc 

type ConcreteProviderNodeFunc func(*NodeAbstractProvider) dag.Vertex

ConcreteProviderNodeFunc is a callback type used to convert an abstract provider to a concrete one of some type.

type ConcreteResourceInstanceDeposedNodeFunc 

type ConcreteResourceInstanceDeposedNodeFunc func(*NodeAbstractResourceInstance, states.DeposedKey) dag.Vertex

ConcreteResourceInstanceDeposedNodeFunc is a callback type used to convert an abstract resource instance to a concrete one of some type that has an associated deposed object key.

type ConcreteResourceInstanceNodeFunc 

type ConcreteResourceInstanceNodeFunc func(*NodeAbstractResourceInstance) dag.Vertex

ConcreteResourceInstanceNodeFunc is a callback type used to convert an abstract resource instance to a concrete one of some type.

type ConcreteResourceNodeFunc 

type ConcreteResourceNodeFunc func(*NodeAbstractResource) dag.Vertex

ConcreteResourceNodeFunc is a callback type used to convert an abstract resource to a concrete one of some type.

type ConfigTransformer 

type ConfigTransformer struct {
	Concrete ConcreteResourceNodeFunc

	// Module is the module to add resources from.
	Config *configs.Config

	// Mode will only add resources that match the given mode
	ModeFilter bool
	Mode       addrs.ResourceMode
	// contains filtered or unexported fields
}

ConfigTransformer is a GraphTransformer that adds all the resources from the configuration to the graph.

The module used to configure this transformer must be the root module.

Only resources are added to the graph. Variables, outputs, and providers must be added via other transforms.

Unlike ConfigTransformerOld, this transformer creates a graph with all resources including module resources, rather than creating module nodes that are then "flattened".

func (*ConfigTransformer) Transform 

func (t *ConfigTransformer) Transform(g *Graph) error

type Context 

type Context struct {
	// contains filtered or unexported fields
}

Context represents all the context that OpenTofu needs in order to perform operations on infrastructure. This structure is built using NewContext.

func NewContext 

func NewContext(opts *ContextOpts) (*Context, tfdiags.Diagnostics)

NewContext creates a new Context structure.

Once a Context is created, the caller must not access or mutate any of the objects referenced (directly or indirectly) by the ContextOpts fields.

If the returned diagnostics contains errors then the resulting context is invalid and must not be used.

func (*Context) Apply 

func (c *Context) Apply(plan *plans.Plan, config *configs.Config) (*states.State, tfdiags.Diagnostics)

Apply performs the actions described by the given Plan object and returns the resulting updated state.

The given configuration *must* be the same configuration that was passed earlier to Context.Plan in order to create this plan.

Even if the returned diagnostics contains errors, Apply always returns the resulting state which is likely to have been partially-updated.

func (*Context) ApplyGraphForUI 

func (c *Context) ApplyGraphForUI(plan *plans.Plan, config *configs.Config) (*Graph, tfdiags.Diagnostics)

ApplyGraphForUI is a last vestage of graphs in the public interface of Context (as opposed to graphs as an implementation detail) intended only for use by the "tofu graph" command when asked to render an apply-time graph.

The result of this is intended only for rendering ot the user as a dot graph, and so may change in future in order to make the result more useful in that context, even if drifts away from the physical graph that OpenTofu Core currently uses as an implementation detail of planning.

func (*Context) Eval 

func (c *Context) Eval(config *configs.Config, state *states.State, moduleAddr addrs.ModuleInstance, opts *EvalOpts) (*lang.Scope, tfdiags.Diagnostics)

Eval produces a scope in which expressions can be evaluated for the given module path.

This method must first evaluate any ephemeral values (input variables, local values, and output values) in the configuration. These ephemeral values are not included in the persisted state, so they must be re-computed using other values in the state before they can be properly evaluated. The updated values are retained in the main state associated with the receiving context.

This function takes no action against remote APIs but it does need access to all provider and provisioner instances in order to obtain their schemas for type checking.

The result is an evaluation scope that can be used to resolve references against the root module. If the returned diagnostics contains errors then the returned scope may be nil. If it is not nil then it may still be used to attempt expression evaluation or other analysis, but some expressions may not behave as expected.

func (*Context) Import 

func (c *Context) Import(config *configs.Config, prevRunState *states.State, opts *ImportOpts) (*states.State, tfdiags.Diagnostics)

Import takes already-created external resources and brings them under OpenTofu management. Import requires the exact type, name, and ID of the resources to import.

This operation is idempotent. If the requested resource is already imported, no changes are made to the state.

Further, this operation also gracefully handles partial state. If during an import there is a failure, all previously imported resources remain imported.

func (*Context) Input 

func (c *Context) Input(config *configs.Config, mode InputMode) tfdiags.Diagnostics

Input asks for input to fill unset required arguments in provider configurations.

Unlike the other better-behaved operation methods, this one actually modifies some internal state inside the receving context so that the captured values will be implicitly available to a subsequent call to Plan, or to some other operation entry point. Hopefully a future iteration of this will change design to make that data flow more explicit.

Because Input saves the results inside the Context object, asking for input twice on the same Context is invalid and will lead to undefined behavior.

Once you've called Input with a particular config, it's invalid to call any other Context method with a different config, because the aforementioned modified internal state won't match. Again, this is an architectural wart that we'll hopefully resolve in future.

func (*Context) Plan 

func (c *Context) Plan(config *configs.Config, prevRunState *states.State, opts *PlanOpts) (*plans.Plan, tfdiags.Diagnostics)

Plan generates an execution plan by comparing the given configuration with the given previous run state.

The given planning options allow control of various other details of the planning process that are not represented directly in the configuration. You can use tofu.DefaultPlanOpts to generate a normal plan with no special options.

If the returned diagnostics contains no errors then the returned plan is applyable, although OpenTofu cannot guarantee that applying it will fully succeed. If the returned diagnostics contains errors but this method still returns a non-nil Plan then the plan describes the subset of actions planned so far, which is not safe to apply but could potentially be used by the UI layer to give extra context to support understanding of the returned error messages.

func (*Context) PlanGraphForUI 

func (c *Context) PlanGraphForUI(config *configs.Config, prevRunState *states.State, mode plans.Mode) (*Graph, tfdiags.Diagnostics)

PlanGraphForUI is a last vestage of graphs in the public interface of Context (as opposed to graphs as an implementation detail) intended only for use by the "tofu graph" command when asked to render a plan-time graph.

The result of this is intended only for rendering to the user as a dot graph, and so may change in future in order to make the result more useful in that context, even if drifts away from the physical graph that OpenTofu Core currently uses as an implementation detail of planning.

func (*Context) Refresh 

func (c *Context) Refresh(config *configs.Config, prevRunState *states.State, opts *PlanOpts) (*states.State, tfdiags.Diagnostics)

Refresh is a vestigial operation that is equivalent to call to Plan and then taking the prior state of the resulting plan.

We retain this only as a measure of semi-backward-compatibility for automation relying on the "tofu refresh" subcommand. The modern way to get this effect is to create and then apply a plan in the refresh-only mode.

func (*Context) Schemas 

func (c *Context) Schemas(config *configs.Config, state *states.State) (*Schemas, tfdiags.Diagnostics)

func (*Context) Stop 

func (c *Context) Stop()

Stop stops the running task.

Stop will block until the task completes.

func (*Context) TestContext 

func (c *Context) TestContext(config *configs.Config, state *states.State, plan *plans.Plan, variables InputValues) *TestContext

TestContext creates a TestContext structure that can evaluate test assertions against the provided state and plan.

func (*Context) Validate 

func (c *Context) Validate(config *configs.Config) tfdiags.Diagnostics

Validate performs semantic validation of a configuration, and returns any warnings or errors.

Syntax and structural checks are performed by the configuration loader, and so are not repeated here.

Validate considers only the configuration and so it won't catch any errors caused by current values in the state, or other external information such as root module input variables. However, the Plan function includes all of the same checks as Validate, in addition to the other work it does to consider the previous run state and the planning options.

type ContextGraphOpts 

type ContextGraphOpts struct {
	// If true, validates the graph structure (checks for cycles).
	Validate bool

	// Legacy graphs only: won't prune the graph
	Verbose bool
}

type ContextGraphWalker 

type ContextGraphWalker struct {
	NullGraphWalker

	// Configurable values
	Context            *Context
	State              *states.SyncState       // Used for safe concurrent access to state
	RefreshState       *states.SyncState       // Used for safe concurrent access to state
	PrevRunState       *states.SyncState       // Used for safe concurrent access to state
	Changes            *plans.ChangesSync      // Used for safe concurrent writes to changes
	Checks             *checks.State           // Used for safe concurrent writes of checkable objects and their check results
	InstanceExpander   *instances.Expander     // Tracks our gradual expansion of module and resource instances
	ImportResolver     *ImportResolver         // Tracks import targets as they are being resolved
	MoveResults        refactoring.MoveResults // Read-only record of earlier processing of move statements
	Operation          walkOperation
	StopContext        context.Context
	RootVariableValues InputValues
	Config             *configs.Config
	PlanTimestamp      time.Time
	Encryption         encryption.Encryption

	// This is an output. Do not set this, nor read it while a graph walk
	// is in progress.
	NonFatalDiagnostics tfdiags.Diagnostics
	// contains filtered or unexported fields
}

ContextGraphWalker is the GraphWalker implementation used with the Context struct to walk and evaluate the graph.

func (*ContextGraphWalker) EnterPath 

func (w *ContextGraphWalker) EnterPath(path addrs.ModuleInstance) EvalContext

func (*ContextGraphWalker) EvalContext 

func (w *ContextGraphWalker) EvalContext() EvalContext

func (*ContextGraphWalker) Execute 

func (w *ContextGraphWalker) Execute(ctx EvalContext, n GraphNodeExecutable) tfdiags.Diagnostics

type ContextMeta 

type ContextMeta struct {
	Env string // Env is the state environment

	// OriginalWorkingDir is the working directory where the OpenTofu CLI
	// was run from, which may no longer actually be the current working
	// directory if the user included the -chdir=... option.
	//
	// If this string is empty then the original working directory is the same
	// as the current working directory.
	//
	// In most cases we should respect the user's override by ignoring this
	// path and just using the current working directory, but this is here
	// for some exceptional cases where the original working directory is
	// needed.
	OriginalWorkingDir string
}

ContextMeta is metadata about the running context. This is information that this package or structure cannot determine on its own but exposes into OpenTofu in various ways. This must be provided by the Context initializer.

type ContextOpts 

type ContextOpts struct {
	Meta         *ContextMeta
	Hooks        []Hook
	Parallelism  int
	Providers    map[addrs.Provider]providers.Factory
	Provisioners map[string]provisioners.Factory
	Encryption   encryption.Encryption

	UIInput UIInput
}

ContextOpts are the user-configurable options to create a context with NewContext.

type DestroyEdgeTransformer 

type DestroyEdgeTransformer struct {
	// FIXME: GraphNodeCreators are not always applying changes, and should not
	// participate in the destroy graph if there are no operations which could
	// interract with destroy nodes. We need Changes for now to detect the
	// action type, but perhaps this should be indicated somehow by the
	// DiffTransformer which was intended to be the only transformer operating
	// from the change set.
	Changes *plans.Changes

	// FIXME: Operation will not be needed here one we can better track
	// inter-provider dependencies and remove the cycle checks in
	// tryInterProviderDestroyEdge.
	Operation walkOperation
}

DestroyEdgeTransformer is a GraphTransformer that creates the proper references for destroy resources. Destroy resources are more complex in that they must be depend on the destruction of resources that in turn depend on the CREATION of the node being destroy.

That is complicated. Visually: 

B_d -> A_d -> A -> B

Notice that A destroy depends on B destroy, while B create depends on A create. They're inverted. This must be done for example because often dependent resources will block parent resources from deleting. Concrete example: VPC with subnets, the VPC can't be deleted while there are still subnets.

func (*DestroyEdgeTransformer) Transform 

func (t *DestroyEdgeTransformer) Transform(g *Graph) error

type DiffTransformer 

type DiffTransformer struct {
	Concrete ConcreteResourceInstanceNodeFunc
	State    *states.State
	Changes  *plans.Changes
	Config   *configs.Config
}

DiffTransformer is a GraphTransformer that adds graph nodes representing each of the resource changes described in the given Changes object.

func (*DiffTransformer) Transform 

func (t *DiffTransformer) Transform(g *Graph) error

type EvalContext 

type EvalContext interface {
	// Stopped returns a channel that is closed when evaluation is stopped
	// via tofu.Context.Stop()
	Stopped() <-chan struct{}

	// Path is the current module path.
	Path() addrs.ModuleInstance

	// Hook is used to call hook methods. The callback is called for each
	// hook and should return the hook action to take and the error.
	Hook(func(Hook) (HookAction, error)) error

	// Input is the UIInput object for interacting with the UI.
	Input() UIInput

	// InitProvider initializes the provider with the given address, and returns
	// the implementation of the resource provider or an error.
	//
	// It is an error to initialize the same provider more than once. This
	// method will panic if the module instance address of the given provider
	// configuration does not match the Path() of the EvalContext.
	InitProvider(addr addrs.AbsProviderConfig) (providers.Interface, error)

	// Provider gets the provider instance with the given address (already
	// initialized) or returns nil if the provider isn't initialized.
	//
	// This method expects an _absolute_ provider configuration address, since
	// resources in one module are able to use providers from other modules.
	// InitProvider must've been called on the EvalContext of the module
	// that owns the given provider before calling this method.
	Provider(addrs.AbsProviderConfig) providers.Interface

	// ProviderSchema retrieves the schema for a particular provider, which
	// must have already been initialized with InitProvider.
	//
	// This method expects an _absolute_ provider configuration address, since
	// resources in one module are able to use providers from other modules.
	ProviderSchema(addrs.AbsProviderConfig) (providers.ProviderSchema, error)

	// CloseProvider closes provider connections that aren't needed anymore.
	//
	// This method will panic if the module instance address of the given
	// provider configuration does not match the Path() of the EvalContext.
	CloseProvider(addrs.AbsProviderConfig) error

	// ConfigureProvider configures the provider with the given
	// configuration. This is a separate context call because this call
	// is used to store the provider configuration for inheritance lookups
	// with ParentProviderConfig().
	//
	// This method will panic if the module instance address of the given
	// provider configuration does not match the Path() of the EvalContext.
	ConfigureProvider(addrs.AbsProviderConfig, cty.Value) tfdiags.Diagnostics

	// ProviderInput and SetProviderInput are used to configure providers
	// from user input.
	//
	// These methods will panic if the module instance address of the given
	// provider configuration does not match the Path() of the EvalContext.
	ProviderInput(addrs.AbsProviderConfig) map[string]cty.Value
	SetProviderInput(addrs.AbsProviderConfig, map[string]cty.Value)

	// Provisioner gets the provisioner instance with the given name.
	Provisioner(string) (provisioners.Interface, error)

	// ProvisionerSchema retrieves the main configuration schema for a
	// particular provisioner, which must have already been initialized with
	// InitProvisioner.
	ProvisionerSchema(string) (*configschema.Block, error)

	// CloseProvisioner closes all provisioner plugins.
	CloseProvisioners() error

	// EvaluateBlock takes the given raw configuration block and associated
	// schema and evaluates it to produce a value of an object type that
	// conforms to the implied type of the schema.
	//
	// The "self" argument is optional. If given, it is the referenceable
	// address that the name "self" should behave as an alias for when
	// evaluating. Set this to nil if the "self" object should not be available.
	//
	// The "key" argument is also optional. If given, it is the instance key
	// of the current object within the multi-instance container it belongs
	// to. For example, on a resource block with "count" set this should be
	// set to a different addrs.IntKey for each instance created from that
	// block. Set this to addrs.NoKey if not appropriate.
	//
	// The returned body is an expanded version of the given body, with any
	// "dynamic" blocks replaced with zero or more static blocks. This can be
	// used to extract correct source location information about attributes of
	// the returned object value.
	EvaluateBlock(body hcl.Body, schema *configschema.Block, self addrs.Referenceable, keyData InstanceKeyEvalData) (cty.Value, hcl.Body, tfdiags.Diagnostics)

	// EvaluateExpr takes the given HCL expression and evaluates it to produce
	// a value.
	//
	// The "self" argument is optional. If given, it is the referenceable
	// address that the name "self" should behave as an alias for when
	// evaluating. Set this to nil if the "self" object should not be available.
	EvaluateExpr(expr hcl.Expression, wantType cty.Type, self addrs.Referenceable) (cty.Value, tfdiags.Diagnostics)

	// EvaluateReplaceTriggeredBy takes the raw reference expression from the
	// config, and returns the evaluated *addrs.Reference along with a boolean
	// indicating if that reference forces replacement.
	EvaluateReplaceTriggeredBy(expr hcl.Expression, repData instances.RepetitionData) (*addrs.Reference, bool, tfdiags.Diagnostics)

	// EvaluationScope returns a scope that can be used to evaluate reference
	// addresses in this context.
	EvaluationScope(self addrs.Referenceable, source addrs.Referenceable, keyData InstanceKeyEvalData) *lang.Scope

	// SetRootModuleArgument defines the value for one variable of the root
	// module. The caller must ensure that given value is a suitable
	// "final value" for the variable, which means that it's already converted
	// and validated to match any configured constraints and validation rules.
	//
	// Calling this function multiple times with the same variable address
	// will silently overwrite the value provided by a previous call.
	SetRootModuleArgument(addrs.InputVariable, cty.Value)

	// SetModuleCallArgument defines the value for one input variable of a
	// particular child module call. The caller must ensure that the given
	// value is a suitable "final value" for the variable, which means that
	// it's already converted and validated to match any configured
	// constraints and validation rules.
	//
	// Calling this function multiple times with the same variable address
	// will silently overwrite the value provided by a previous call.
	SetModuleCallArgument(addrs.ModuleCallInstance, addrs.InputVariable, cty.Value)

	// GetVariableValue returns the value provided for the input variable with
	// the given address, or cty.DynamicVal if the variable hasn't been assigned
	// a value yet.
	//
	// Most callers should deal with variable values only indirectly via
	// EvaluationScope and the other expression evaluation functions, but
	// this is provided because variables tend to be evaluated outside of
	// the context of the module they belong to and so we sometimes need to
	// override the normal expression evaluation behavior.
	GetVariableValue(addr addrs.AbsInputVariableInstance) cty.Value

	// Changes returns the writer object that can be used to write new proposed
	// changes into the global changes set.
	Changes() *plans.ChangesSync

	// State returns a wrapper object that provides safe concurrent access to
	// the global state.
	State() *states.SyncState

	// Checks returns the object that tracks the state of any custom checks
	// declared in the configuration.
	Checks() *checks.State

	// RefreshState returns a wrapper object that provides safe concurrent
	// access to the state used to store the most recently refreshed resource
	// values.
	RefreshState() *states.SyncState

	// PrevRunState returns a wrapper object that provides safe concurrent
	// access to the state which represents the result of the previous run,
	// updated only so that object data conforms to current schemas for
	// meaningful comparison with RefreshState.
	PrevRunState() *states.SyncState

	// InstanceExpander returns a helper object for tracking the expansion of
	// graph nodes during the plan phase in response to "count" and "for_each"
	// arguments.
	//
	// The InstanceExpander is a global object that is shared across all of the
	// EvalContext objects for a given configuration.
	InstanceExpander() *instances.Expander

	// MoveResults returns a map describing the results of handling any
	// resource instance move statements prior to the graph walk, so that
	// the graph walk can then record that information appropriately in other
	// artifacts produced by the graph walk.
	//
	// This data structure is created prior to the graph walk and read-only
	// thereafter, so callers must not modify the returned map or any other
	// objects accessible through it.
	MoveResults() refactoring.MoveResults

	// ImportResolver returns a helper object for tracking the resolution of
	// imports, after evaluating the dynamic address and ID of the import targets
	//
	// This data is created during the graph walk, as import target addresses are being resolved
	// Its primary use is for validation at the end of a plan - To make sure all imports have been satisfied
	// and have a configuration
	ImportResolver() *ImportResolver

	// WithPath returns a copy of the context with the internal path set to the
	// path argument.
	WithPath(path addrs.ModuleInstance) EvalContext

	// Returns the currently configured encryption setup
	GetEncryption() encryption.Encryption
}

EvalContext is the interface that is given to eval nodes to execute.

type EvalGraphBuilder 

type EvalGraphBuilder struct {
	// Config is the configuration tree.
	Config *configs.Config

	// State is the current state
	State *states.State

	// RootVariableValues are the raw input values for root input variables
	// given by the caller, which we'll resolve into final values as part
	// of the plan walk.
	RootVariableValues InputValues

	// Plugins is a library of plug-in components (providers and
	// provisioners) available for use.
	Plugins *contextPlugins
}

EvalGraphBuilder implements GraphBuilder and constructs a graph suitable for evaluating in-memory values (input variables, local values, output values) in the state without any other side-effects.

This graph is used only in weird cases, such as the "tofu console" CLI command, where we need to evaluate expressions against the state without taking any other actions.

The generated graph will include nodes for providers, resources, etc just to allow indirect dependencies to be resolved, but these nodes will not take any actions themselves since we assume that their parts of the state, if any, are already complete.

Although the providers are never configured, they must still be available in order to obtain schema information used for type checking, etc.

func (*EvalGraphBuilder) Build 

func (b *EvalGraphBuilder) Build(path addrs.ModuleInstance) (*Graph, tfdiags.Diagnostics)

See GraphBuilder

func (*EvalGraphBuilder) Steps 

func (b *EvalGraphBuilder) Steps() []GraphTransformer

See GraphBuilder

type EvalOpts 

type EvalOpts struct {
	SetVariables InputValues
}

type EvaluatedConfigImportTarget 

type EvaluatedConfigImportTarget struct {
	// Config is the original import block for this import. This might be null
	// if the import did not originate in config.
	Config *configs.Import

	// Addr is the actual address of the resource instance that we should import into. At this point, the address
	// should be fully evaluated
	Addr addrs.AbsResourceInstance

	// ID is the string ID of the resource to import. This is resource-instance specific.
	ID string
}

EvaluatedConfigImportTarget is a target that we need to import. It's created when an import target originated from an import block, after everything regarding the configuration has been evaluated. At this point, the import target is of a single resource instance

type Evaluator 

type Evaluator struct {
	// Operation defines what type of operation this evaluator is being used
	// for.
	Operation walkOperation

	// Meta is contextual metadata about the current operation.
	Meta *ContextMeta

	// Config is the root node in the configuration tree.
	Config *configs.Config

	VariableValuesLock *sync.Mutex
	// VariableValues is a map from variable names to their associated values,
	// within the module indicated by ModulePath. VariableValues is modified
	// concurrently, and so it must be accessed only while holding
	// VariableValuesLock.
	//
	// The first map level is string representations of addr.ModuleInstance
	// values, while the second level is variable names.
	VariableValues map[string]map[string]cty.Value

	// Plugins is the library of available plugin components (providers and
	// provisioners) that we have available to help us evaluate expressions
	// that interact with plugin-provided objects.
	//
	// From this we only access the schemas of the plugins, and don't otherwise
	// interact with plugin instances.
	Plugins *contextPlugins

	// State is the current state, embedded in a wrapper that ensures that
	// it can be safely accessed and modified concurrently.
	State *states.SyncState

	// Changes is the set of proposed changes, embedded in a wrapper that
	// ensures they can be safely accessed and modified concurrently.
	Changes *plans.ChangesSync

	PlanTimestamp time.Time
}

Evaluator provides the necessary contextual data for evaluating expressions for a particular walk operation.

func (*Evaluator) Scope 

func (e *Evaluator) Scope(data lang.Data, self addrs.Referenceable, source addrs.Referenceable, functions lang.ProviderFunction) *lang.Scope

Scope creates an evaluation scope for the given module path and optional resource.

If the "self" argument is nil then the "self" object is not available in evaluated expressions. Otherwise, it behaves as an alias for the given address.

type ExternalReferenceTransformer 

type ExternalReferenceTransformer struct {
	ExternalReferences []*addrs.Reference
}

ExternalReferenceTransformer will add a GraphNodeReferencer into the graph that makes no changes to the graph itself but, by referencing the addresses within ExternalReferences, ensures that any temporary nodes that are required by an external caller, such as the tofu testing framework, are not skipped because they are not referenced from within the module.

func (*ExternalReferenceTransformer) Transform 

func (t *ExternalReferenceTransformer) Transform(g *Graph) error

type ForcedCBDTransformer 

type ForcedCBDTransformer struct {
}

ForcedCBDTransformer detects when a particular CBD-able graph node has dependencies with another that has create_before_destroy set that require it to be forced on, and forces it on.

This must be used in the plan graph builder to ensure that create_before_destroy settings are properly propagated before constructing the planned changes. This requires that the plannable resource nodes implement GraphNodeDestroyerCBD.

func (*ForcedCBDTransformer) Transform 

func (t *ForcedCBDTransformer) Transform(g *Graph) error

type Graph 

type Graph struct {
	// Graph is the actual DAG. This is embedded so you can call the DAG
	// methods directly.
	dag.AcyclicGraph

	// Path is the path in the module tree that this Graph represents.
	Path addrs.ModuleInstance
}

Graph represents the graph that OpenTofu uses to represent resources and their dependencies.

func (*Graph) DirectedGraph 

func (g *Graph) DirectedGraph() dag.Grapher

func (*Graph) Walk 

func (g *Graph) Walk(walker GraphWalker) tfdiags.Diagnostics

Walk walks the graph with the given walker for callbacks. The graph will be walked with full parallelism, so the walker should expect to be called in concurrently.

type GraphBuilder 

type GraphBuilder interface {
	// Build builds the graph for the given module path. It is up to
	// the interface implementation whether this build should expand
	// the graph or not.
	Build(addrs.ModuleInstance) (*Graph, tfdiags.Diagnostics)
}

GraphBuilder is an interface that can be implemented and used with OpenTofu to build the graph that OpenTofu walks.

type GraphNodeAttachDependencies 

type GraphNodeAttachDependencies interface {
	GraphNodeConfigResource
	AttachDependencies([]addrs.ConfigResource)
}

type GraphNodeAttachProvider 

type GraphNodeAttachProvider interface {
	// ProviderName with no module prefix. Example: "aws".
	ProviderAddr() addrs.AbsProviderConfig

	// Sets the configuration
	AttachProvider(*configs.Provider)
}

GraphNodeAttachProvider is an interface that must be implemented by nodes that want provider configurations attached.

type GraphNodeAttachProviderConfigSchema 

type GraphNodeAttachProviderConfigSchema interface {
	GraphNodeProvider

	AttachProviderConfigSchema(*configschema.Block)
}

GraphNodeAttachProviderConfigSchema is an interface implemented by node types that need a provider configuration schema attached.

type GraphNodeAttachProviderMetaConfigs 

type GraphNodeAttachProviderMetaConfigs interface {
	GraphNodeConfigResource

	// Sets the configuration
	AttachProviderMetaConfigs(map[addrs.Provider]*configs.ProviderMeta)
}

GraphNodeAttachProviderMetaConfigs is an interface that must be implemented by nodes that want provider meta configurations attached.

type GraphNodeAttachProvisionerSchema 

type GraphNodeAttachProvisionerSchema interface {
	ProvisionedBy() []string

	// SetProvisionerSchema is called during transform for each provisioner
	// type returned from ProvisionedBy, providing the configuration schema
	// for each provisioner in turn. The implementer should save these for
	// later use in evaluating provisioner configuration blocks.
	AttachProvisionerSchema(name string, schema *configschema.Block)
}

GraphNodeAttachProvisionerSchema is an interface implemented by node types that need one or more provisioner schemas attached.

type GraphNodeAttachResourceConfig 

type GraphNodeAttachResourceConfig interface {
	GraphNodeConfigResource

	// Sets the configuration
	AttachResourceConfig(*configs.Resource)
}

GraphNodeAttachResourceConfig is an interface that must be implemented by nodes that want resource configurations attached.

type GraphNodeAttachResourceSchema 

type GraphNodeAttachResourceSchema interface {
	GraphNodeConfigResource
	GraphNodeProviderConsumer

	AttachResourceSchema(schema *configschema.Block, version uint64)
}

GraphNodeAttachResourceSchema is an interface implemented by node types that need a resource schema attached.

type GraphNodeAttachResourceState 

type GraphNodeAttachResourceState interface {
	GraphNodeResourceInstance

	// Sets the state
	AttachResourceState(*states.Resource)
}

GraphNodeAttachResourceState is an interface that can be implemented to request that a ResourceState is attached to the node.

Due to a historical naming inconsistency, the type ResourceState actually represents the state for a particular _instance_, while InstanceState represents the values for that instance during a particular phase (e.g. primary vs. deposed). Consequently, GraphNodeAttachResourceState is supported only for nodes that represent resource instances, even though the name might suggest it is for containing resources.

type GraphNodeCloseProvider 

type GraphNodeCloseProvider interface {
	GraphNodeModulePath
	CloseProviderAddr() addrs.AbsProviderConfig
}

GraphNodeCloseProvider is an interface that nodes that can be a close provider must implement. The CloseProviderName returned is the name of the provider they satisfy.

type GraphNodeConfigResource 

type GraphNodeConfigResource interface {
	ResourceAddr() addrs.ConfigResource
}

GraphNodeConfigResource is implemented by any nodes that represent a resource. The type of operation cannot be assumed, only that this node represents the given resource.

type GraphNodeCreator 

type GraphNodeCreator interface {
	// CreateAddr is the address of the resource being created or updated
	CreateAddr() *addrs.AbsResourceInstance
}

GraphNodeCreator must be implemented by nodes that create OR update resources.

type GraphNodeDeposedResourceInstanceObject 

type GraphNodeDeposedResourceInstanceObject interface {
	DeposedInstanceObjectKey() states.DeposedKey
}

type GraphNodeDeposer 

type GraphNodeDeposer interface {
	// SetPreallocatedDeposedKey will be called during graph construction
	// if a particular node must use a pre-allocated deposed key if/when it
	// "deposes" the current object of its associated resource instance.
	SetPreallocatedDeposedKey(key states.DeposedKey)
}

GraphNodeDeposer is an optional interface implemented by graph nodes that might create a single new deposed object for a specific associated resource instance, allowing a caller to optionally pre-allocate a DeposedKey for it.

type GraphNodeDestroyer 

type GraphNodeDestroyer interface {
	dag.Vertex

	// DestroyAddr is the address of the resource that is being
	// destroyed by this node. If this returns nil, then this node
	// is not destroying anything.
	DestroyAddr() *addrs.AbsResourceInstance
}

GraphNodeDestroyer must be implemented by nodes that destroy resources.

type GraphNodeDestroyerCBD 

type GraphNodeDestroyerCBD interface {
	// CreateBeforeDestroy returns true if this node represents a node
	// that is doing a CBD.
	CreateBeforeDestroy() bool

	// ModifyCreateBeforeDestroy is called when the CBD state of a node
	// is changed dynamically. This can return an error if this isn't
	// allowed.
	ModifyCreateBeforeDestroy(bool) error
}

GraphNodeDestroyerCBD must be implemented by nodes that might be create-before-destroy destroyers, or might plan a create-before-destroy action.

type GraphNodeDynamicExpandable 

type GraphNodeDynamicExpandable interface {
	// DynamicExpand returns a new graph which will be treated as the dynamic
	// subgraph of the receiving node.
	//
	// The second return value is of type error for historical reasons;
	// it's valid (and most ideal) for DynamicExpand to return the result
	// of calling ErrWithWarnings on a tfdiags.Diagnostics value instead,
	// in which case the caller will unwrap it and gather the individual
	// diagnostics.
	DynamicExpand(EvalContext) (*Graph, error)
}

GraphNodeDynamicExpandable is an interface that nodes can implement to signal that they can be expanded at eval-time (hence dynamic). These nodes are given the eval context and are expected to return a new subgraph.

type GraphNodeExecutable 

type GraphNodeExecutable interface {
	Execute(EvalContext, walkOperation) tfdiags.Diagnostics
}

GraphNodeExecutable is the interface that graph nodes must implement to enable execution.

type GraphNodeModuleInstance 

type GraphNodeModuleInstance interface {
	Path() addrs.ModuleInstance
}

GraphNodeModuleInstance says that a node is part of a graph with a different path, and the context should be adjusted accordingly.

type GraphNodeModulePath 

type GraphNodeModulePath interface {
	ModulePath() addrs.Module
}

GraphNodeModulePath is implemented by all referenceable nodes, to indicate their configuration path in unexpanded modules.

type GraphNodeProvider 

type GraphNodeProvider interface {
	GraphNodeModulePath
	ProviderAddr() addrs.AbsProviderConfig
	Name() string
}

GraphNodeProvider is an interface that nodes that can be a provider must implement.

ProviderAddr returns the address of the provider configuration this satisfies, which is relative to the path returned by method Path().

Name returns the full name of the provider in the config.

type GraphNodeProviderConsumer 

type GraphNodeProviderConsumer interface {
	GraphNodeModulePath
	// ProvidedBy returns the address of the provider configuration the node
	// refers to, if available. The following value types may be returned:
	//
	//   nil + exact true: the node does not require a provider
	// * addrs.LocalProviderConfig: the provider was set in the resource config
	// * addrs.AbsProviderConfig + exact true: the provider configuration was
	//   taken from the instance state.
	// * addrs.AbsProviderConfig + exact false: no config or state; the returned
	//   value is a default provider configuration address for the resource's
	//   Provider
	ProvidedBy() (addr addrs.ProviderConfig, exact bool)

	// Provider() returns the Provider FQN for the node.
	Provider() (provider addrs.Provider)

	// Set the resolved provider address for this resource.
	SetProvider(addrs.AbsProviderConfig)
}

GraphNodeProviderConsumer is an interface that nodes that require a provider must implement. ProvidedBy must return the address of the provider to use, which will be resolved to a configuration either in the same module or in an ancestor module, with the resulting absolute address passed to SetProvider.

type GraphNodeProvisionerConsumer 

type GraphNodeProvisionerConsumer interface {
	ProvisionedBy() []string
}

GraphNodeProvisionerConsumer is an interface that nodes that require a provisioner must implement. ProvisionedBy must return the names of the provisioners to use.

type GraphNodeReferenceOutside 

type GraphNodeReferenceOutside interface {
	// ReferenceOutside returns a path in which any references from this node
	// are resolved.
	ReferenceOutside() (selfPath, referencePath addrs.Module)
}

GraphNodeReferenceOutside is an interface that can optionally be implemented. A node that implements it can specify that its own referenceable addresses and/or the addresses it references are in a different module than the node itself.

Any referenceable addresses returned by ReferenceableAddrs are interpreted relative to the returned selfPath.

Any references returned by References are interpreted relative to the returned referencePath.

It is valid but not required for either of these paths to match what is returned by method Path, though if both match the main Path then there is no reason to implement this method.

The primary use-case for this is the nodes representing module input variables, since their expressions are resolved in terms of their calling module, but they are still referenced from their own module.

type GraphNodeReferenceable 

type GraphNodeReferenceable interface {
	GraphNodeModulePath

	// ReferenceableAddrs returns a list of addresses through which this can be
	// referenced.
	ReferenceableAddrs() []addrs.Referenceable
}

GraphNodeReferenceable must be implemented by any node that represents a OpenTofu thing that can be referenced (resource, module, etc.).

Even if the thing has no name, this should return an empty list. By implementing this and returning a non-nil result, you say that this CAN be referenced and other methods of referencing may still be possible (such as by path!)

type GraphNodeReferencer 

type GraphNodeReferencer interface {
	GraphNodeModulePath

	// References returns a list of references made by this node, which
	// include both a referenced address and source location information for
	// the reference.
	References() []*addrs.Reference
}

GraphNodeReferencer must be implemented by nodes that reference other OpenTofu items and therefore depend on them.

type GraphNodeResourceInstance 

type GraphNodeResourceInstance interface {
	ResourceInstanceAddr() addrs.AbsResourceInstance

	// StateDependencies returns any inter-resource dependencies that are
	// stored in the state.
	StateDependencies() []addrs.ConfigResource
}

GraphNodeResourceInstance is implemented by any nodes that represent a resource instance. A single resource may have multiple instances if, for example, the "count" or "for_each" argument is used for it in configuration.

type GraphNodeRootReferencer 

type GraphNodeRootReferencer interface {
	GraphNodeReferencer

	RootReferences() []*addrs.Reference
}

GraphNodeRootReferencer is implemented by nodes that reference the root module, for example module imports

type GraphNodeTargetable 

type GraphNodeTargetable interface {
	SetTargets([]addrs.Targetable)
}

GraphNodeTargetable is an interface for graph nodes to implement when they need to be told about incoming targets. This is useful for nodes that need to respect targets as they dynamically expand. Note that the list of targets provided will contain every target provided, and each implementing graph node must filter this list to targets considered relevant.

type GraphTransformer 

type GraphTransformer interface {
	Transform(*Graph) error
}

GraphTransformer is the interface that transformers implement. This interface is only for transforms that need entire graph visibility.

func GraphTransformMulti 

func GraphTransformMulti(ts ...GraphTransformer) GraphTransformer

GraphTransformMulti combines multiple graph transformers into a single GraphTransformer that runs all the individual graph transformers.

type GraphVertexTransformer 

type GraphVertexTransformer interface {
	Transform(dag.Vertex) (dag.Vertex, error)
}

GraphVertexTransformer is an interface that transforms a single Vertex within with graph. This is a specialization of GraphTransformer that makes it easy to do vertex replacement.

The GraphTransformer that runs through the GraphVertexTransformers is VertexTransformer.

type GraphWalker 

type GraphWalker interface {
	EvalContext() EvalContext
	EnterPath(addrs.ModuleInstance) EvalContext
	ExitPath(addrs.ModuleInstance)
	Execute(EvalContext, GraphNodeExecutable) tfdiags.Diagnostics
}

GraphWalker is an interface that can be implemented that when used with Graph.Walk will invoke the given callbacks under certain events.

type Hook 

type Hook interface {
	// PreApply and PostApply are called before and after an action for a
	// single instance is applied. The error argument in PostApply is the
	// error, if any, that was returned from the provider Apply call itself.
	PreApply(addr addrs.AbsResourceInstance, gen states.Generation, action plans.Action, priorState, plannedNewState cty.Value) (HookAction, error)
	PostApply(addr addrs.AbsResourceInstance, gen states.Generation, newState cty.Value, err error) (HookAction, error)

	// PreDiff and PostDiff are called before and after a provider is given
	// the opportunity to customize the proposed new state to produce the
	// planned new state.
	PreDiff(addr addrs.AbsResourceInstance, gen states.Generation, priorState, proposedNewState cty.Value) (HookAction, error)
	PostDiff(addr addrs.AbsResourceInstance, gen states.Generation, action plans.Action, priorState, plannedNewState cty.Value) (HookAction, error)

	// The provisioning hooks signal both the overall start end end of
	// provisioning for a particular instance and of each of the individual
	// configured provisioners for each instance. The sequence of these
	// for a given instance might look something like this:
	//
	//          PreProvisionInstance(aws_instance.foo[1], ...)
	//      PreProvisionInstanceStep(aws_instance.foo[1], "file")
	//     PostProvisionInstanceStep(aws_instance.foo[1], "file", nil)
	//      PreProvisionInstanceStep(aws_instance.foo[1], "remote-exec")
	//               ProvisionOutput(aws_instance.foo[1], "remote-exec", "Installing foo...")
	//               ProvisionOutput(aws_instance.foo[1], "remote-exec", "Configuring bar...")
	//     PostProvisionInstanceStep(aws_instance.foo[1], "remote-exec", nil)
	//         PostProvisionInstance(aws_instance.foo[1], ...)
	//
	// ProvisionOutput is called with output sent back by the provisioners.
	// This will be called multiple times as output comes in, with each call
	// representing one line of output. It cannot control whether the
	// provisioner continues running.
	PreProvisionInstance(addr addrs.AbsResourceInstance, state cty.Value) (HookAction, error)
	PostProvisionInstance(addr addrs.AbsResourceInstance, state cty.Value) (HookAction, error)
	PreProvisionInstanceStep(addr addrs.AbsResourceInstance, typeName string) (HookAction, error)
	PostProvisionInstanceStep(addr addrs.AbsResourceInstance, typeName string, err error) (HookAction, error)
	ProvisionOutput(addr addrs.AbsResourceInstance, typeName string, line string)

	// PreRefresh and PostRefresh are called before and after a single
	// resource state is refreshed, respectively.
	PreRefresh(addr addrs.AbsResourceInstance, gen states.Generation, priorState cty.Value) (HookAction, error)
	PostRefresh(addr addrs.AbsResourceInstance, gen states.Generation, priorState cty.Value, newState cty.Value) (HookAction, error)

	// PreImportState and PostImportState are called before and after
	// (respectively) each state import operation for a given resource address when
	// using the legacy import command.
	PreImportState(addr addrs.AbsResourceInstance, importID string) (HookAction, error)
	PostImportState(addr addrs.AbsResourceInstance, imported []providers.ImportedResource) (HookAction, error)

	// PrePlanImport and PostPlanImport are called during a plan before and after planning to import
	// a new resource using the configuration-driven import workflow.
	PrePlanImport(addr addrs.AbsResourceInstance, importID string) (HookAction, error)
	PostPlanImport(addr addrs.AbsResourceInstance, imported []providers.ImportedResource) (HookAction, error)

	// PreApplyImport and PostApplyImport are called during an apply for each imported resource when
	// using the configuration-driven import workflow.
	PreApplyImport(addr addrs.AbsResourceInstance, importing plans.ImportingSrc) (HookAction, error)
	PostApplyImport(addr addrs.AbsResourceInstance, importing plans.ImportingSrc) (HookAction, error)

	// Stopping is called if an external signal requests that OpenTofu
	// gracefully abort an operation in progress.
	//
	// This notification might suggest that the user wants OpenTofu to exit
	// ASAP and in that case it's possible that if OpenTofu runs for too much
	// longer then it'll get killed un-gracefully, and so this hook could be
	// an opportunity to persist any transient data that would be lost under
	// a subsequent kill signal. However, implementations must take care to do
	// so in a way that won't cause corruption if the process _is_ killed while
	// this hook is still running.
	//
	// This hook cannot control whether OpenTofu continues, because the
	// graceful shutdown process is typically already running by the time this
	// function is called.
	Stopping()

	// PostStateUpdate is called each time the state is updated. It receives
	// a deep copy of the state, which it may therefore access freely without
	// any need for locks to protect from concurrent writes from the caller.
	PostStateUpdate(new *states.State) (HookAction, error)
}

Hook is the interface that must be implemented to hook into various parts of OpenTofu, allowing you to inspect or change behavior at runtime.

There are MANY hook points into OpenTofu. If you only want to implement some hook points, but not all (which is the likely case), then embed the NilHook into your struct, which implements all of the interface but does nothing. Then, override only the functions you want to implement.

type HookAction 

type HookAction byte

HookAction is an enum of actions that can be taken as a result of a hook callback. This allows you to modify the behavior of OpenTofu at runtime. 

const (
	// HookActionContinue continues with processing as usual.
	HookActionContinue HookAction = iota

	// HookActionHalt halts immediately: no more hooks are processed
	// and the action that OpenTofu was about to take is cancelled.
	HookActionHalt
)

type ImportOpts 

type ImportOpts struct {
	// Targets are the targets to import
	Targets []*ImportTarget

	// SetVariables are the variables set outside of the configuration,
	// such as on the command line, in variables files, etc.
	SetVariables InputValues
}

ImportOpts are used as the configuration for Import.

type ImportResolver 

type ImportResolver struct {
	// contains filtered or unexported fields
}

ImportResolver is a struct that maintains a map of all imports as they are being resolved. This is specifically for imports originating from configuration. Import targets' addresses are not fully known from the get-go, and could only be resolved later when walking the graph. This struct helps keep track of the resolved imports, mostly for validation that all imports have been addressed and point to an actual configuration. The key of the map is a string representation of the address, and the value is an EvaluatedConfigImportTarget.

func NewImportResolver 

func NewImportResolver() *ImportResolver

func (*ImportResolver) ExpandAndResolveImport 

func (ri *ImportResolver) ExpandAndResolveImport(importTarget *ImportTarget, ctx EvalContext) tfdiags.Diagnostics

ExpandAndResolveImport is responsible for two operations: 1. Expands the ImportTarget (originating from an import block) if it contains a 'for_each' attribute. 2. Goes over the expanded imports and resolves the ID and address, when we have the context necessary to resolve them. The resolved import target would be an EvaluatedConfigImportTarget. This function mutates the EvalContext's ImportResolver, adding the resolved import target. The function errors if we failed to evaluate the ID or the address.

func (*ImportResolver) GetAllImports 

func (ri *ImportResolver) GetAllImports() []EvaluatedConfigImportTarget

GetAllImports returns all resolved imports

func (*ImportResolver) GetImport 

func (ri *ImportResolver) GetImport(address addrs.AbsResourceInstance) *EvaluatedConfigImportTarget

type ImportTarget 

type ImportTarget struct {
	// Config is the original import block for this import. This might be null
	// if the import did not originate in config.
	// Config is mutually-exclusive with CommandLineImportTarget
	Config *configs.Import

	// CommandLineImportTarget is the ImportTarget information in the case of an import target origination for the
	// command line. CommandLineImportTarget is mutually-exclusive with Config
	*CommandLineImportTarget
}

ImportTarget is a target that we need to import. It could either represent a single resource or multiple instances of the same resource, if for_each is used ImportTarget can be either a result of the import CLI command, or the import block

func (*ImportTarget) IsFromImportBlock 

func (i *ImportTarget) IsFromImportBlock() bool

IsFromImportBlock checks whether the import target originates from an `import` block Currently, it should yield the opposite result of IsFromImportCommandLine, as those two are mutually-exclusive

func (*ImportTarget) IsFromImportCommandLine 

func (i *ImportTarget) IsFromImportCommandLine() bool

IsFromImportCommandLine checks whether the import target originates from a `tofu import` command Currently, it should yield the opposite result of IsFromImportBlock, as those two are mutually-exclusive

func (*ImportTarget) ResolvedAddr 

func (i *ImportTarget) ResolvedAddr() *addrs.AbsResourceInstance

ResolvedAddr returns a reference to the resolved address of an import target, if possible. If not possible, it returns nil. For an ImportTarget originating from the command line, the address is already known However for an ImportTarget originating from an import block, the full address might not be known initially, and could only be evaluated down the line.

func (*ImportTarget) StaticAddr 

func (i *ImportTarget) StaticAddr() addrs.ConfigResource

StaticAddr returns the static address part of an import target For an ImportTarget originating from the command line, the address is already known However for an ImportTarget originating from an import block, the full address might not be known initially, and could only be evaluated down the line. Here, we create a static representation for the address. This is useful so that we could have information on the ImportTarget early on, such as the Module and Resource of it

type InputMode 

type InputMode byte

InputMode defines what sort of input will be asked for when Input is called on Context. 

const (
	// InputModeProvider asks for provider variables
	InputModeProvider InputMode = 1 << iota

	// InputModeStd is the standard operating mode and asks for both variables
	// and providers.
	InputModeStd = InputModeProvider
)

type InputOpts 

type InputOpts struct {
	// Id is a unique ID for the question being asked that might be
	// used for logging or to look up a prior answered question.
	Id string

	// Query is a human-friendly question for inputting this value.
	Query string

	// Description is a description about what this option is. Be wary
	// that this will probably be in a terminal so split lines as you see
	// necessary.
	Description string

	// Default will be the value returned if no data is entered.
	Default string

	// Secret should be true if we are asking for sensitive input.
	// If attached to a TTY, OpenTofu will disable echo.
	Secret bool
}

InputOpts are options for asking for input.

type InputValue 

type InputValue struct {
	// Value is the raw value as provided by the user as part of the plan
	// options, or a corresponding similar data structure for non-plan
	// operations.
	//
	// If a particular variable declared in the root module is _not_ set by
	// the user then the caller must still provide an InputValue for it but
	// must set Value to cty.NilVal to represent the absense of a value.
	// This requirement is to help detect situations where the caller isn't
	// correctly detecting and handling all of the declared variables.
	//
	// For historical reasons it's important that callers distinguish the
	// situation of the value not being set at all (cty.NilVal) from the
	// situation of it being explicitly set to null (a cty.NullVal result):
	// for "nullable" input variables that distinction unfortunately decides
	// whether the final value will be the variable's default or will be
	// explicitly null.
	Value cty.Value

	// SourceType is a high-level category for where the value of Value
	// came from, which OpenTofu Core uses to tailor some of its error
	// messages to be more helpful to the user.
	//
	// Some SourceType values should be accompanied by a populated SourceRange
	// value. See that field's documentation below for more information.
	SourceType ValueSourceType

	// SourceRange provides source location information for values whose
	// SourceType is either ValueFromConfig, ValueFromNamedFile, or
	// ValueForNormalFile. It is not populated for other source types, and so
	// should not be used.
	SourceRange tfdiags.SourceRange
}

InputValue represents a raw value for a root module input variable as provided by the external caller into a function like tofu.Context.Plan.

InputValue should represent as directly as possible what the user set the variable to, without any attempt to convert the value to the variable's type constraint or substitute the configured default values for variables that wasn't set. Those adjustments will be handled by OpenTofu Core itself as part of performing the requested operation.

A OpenTofu Core caller must provide an InputValue object for each of the variables declared in the root module, even if the end user didn't provide an explicit value for some of them. See the Value field documentation for how to handle that situation.

OpenTofu Core also internally uses InputValue to represent the raw value provided for a variable in a child module call, following the same conventions. However, that's an implementation detail not visible to outside callers.

func (*InputValue) GoString 

func (v *InputValue) GoString() string

func (*InputValue) HasSourceRange 

func (v *InputValue) HasSourceRange() bool

HasSourceRange returns true if the reciever has a source type for which we expect the SourceRange field to be populated with a valid range.

type InputValues 

type InputValues map[string]*InputValue

InputValues is a map of InputValue instances.

func InputValuesFromCaller 

func InputValuesFromCaller(vals map[string]cty.Value) InputValues

InputValuesFromCaller turns the given map of naked values into an InputValues that attributes each value to "a caller", using the source type ValueFromCaller. This is primarily useful for testing purposes.

This should not be used as a general way to convert map[string]cty.Value into InputValues, since in most real cases we want to set a suitable other SourceType and possibly SourceRange value.

func (InputValues) HasValues 

func (vv InputValues) HasValues(vals map[string]cty.Value) bool

HasValues returns true if the reciever has the same values as in the given map, disregarding the source types and source ranges.

Values are compared using the cty "RawEquals" method, which means that unknown values can be considered equal to one another if they are of the same type.

func (InputValues) Identical 

func (vv InputValues) Identical(other InputValues) bool

Identical returns true if the given InputValues has the same values, source types, and source ranges as the receiver.

Values are compared using the cty "RawEquals" method, which means that unknown values can be considered equal to one another if they are of the same type.

This method is primarily for testing. For most practical purposes, it's better to use SameValues or HasValues.

func (InputValues) JustValues 

func (vv InputValues) JustValues() map[string]cty.Value

JustValues returns a map that just includes the values, discarding the source information.

func (InputValues) Override 

func (vv InputValues) Override(others ...InputValues) InputValues

Override merges the given value maps with the receiver, overriding any conflicting keys so that the latest definition wins.

func (InputValues) SameValues 

func (vv InputValues) SameValues(other InputValues) bool

SameValues returns true if the given InputValues has the same values as the receiever, disregarding the source types and source ranges.

Values are compared using the cty "RawEquals" method, which means that unknown values can be considered equal to one another if they are of the same type.

type InstanceKeyEvalData 

type InstanceKeyEvalData = instances.RepetitionData

InstanceKeyEvalData is the old name for instances.RepetitionData, aliased here for compatibility. In new code, use instances.RepetitionData instead.

func EvalDataForInstanceKey 

func EvalDataForInstanceKey(key addrs.InstanceKey, forEachMap map[string]cty.Value) InstanceKeyEvalData

EvalDataForInstanceKey constructs a suitable InstanceKeyEvalData for evaluating in a context that has the given instance key.

The forEachMap argument can be nil when preparing for evaluation in a context where each.value is prohibited, such as a destroy-time provisioner. In that case, the returned EachValue will always be cty.NilVal.

type LocalTransformer 

type LocalTransformer struct {
	Config *configs.Config
}

LocalTransformer is a GraphTransformer that adds all the local values from the configuration to the graph.

func (*LocalTransformer) Transform 

func (t *LocalTransformer) Transform(g *Graph) error

type MissingProviderTransformer 

type MissingProviderTransformer struct {
	// MissingProviderTransformer needs the config to rule out _implied_ default providers
	Config *configs.Config

	// Concrete, if set, overrides how the providers are made.
	Concrete ConcreteProviderNodeFunc
}

MissingProviderTransformer is a GraphTransformer that adds to the graph a node for each default provider configuration that is referenced by another node but not already present in the graph.

These "default" nodes are always added to the root module, regardless of where they are requested. This is important because our inheritance resolution behavior in ProviderTransformer will then treat these as a last-ditch fallback after walking up the tree, rather than preferring them as it would if they were placed in the same module as the requester.

This transformer may create extra nodes that are not needed in practice, due to overriding provider configurations in child modules. PruneProviderTransformer can then remove these once ProviderTransformer has resolved all of the inheritence, etc.

func (*MissingProviderTransformer) Transform 

func (t *MissingProviderTransformer) Transform(g *Graph) error

type MockEvalContext 

type MockEvalContext struct {
	StoppedCalled bool
	StoppedValue  <-chan struct{}

	HookCalled bool
	HookHook   Hook
	HookError  error

	InputCalled bool
	InputInput  UIInput

	InitProviderCalled   bool
	InitProviderType     string
	InitProviderAddr     addrs.AbsProviderConfig
	InitProviderProvider providers.Interface
	InitProviderError    error

	ProviderCalled   bool
	ProviderAddr     addrs.AbsProviderConfig
	ProviderProvider providers.Interface

	ProviderSchemaCalled bool
	ProviderSchemaAddr   addrs.AbsProviderConfig
	ProviderSchemaSchema providers.ProviderSchema
	ProviderSchemaError  error

	CloseProviderCalled   bool
	CloseProviderAddr     addrs.AbsProviderConfig
	CloseProviderProvider providers.Interface

	ProviderInputCalled bool
	ProviderInputAddr   addrs.AbsProviderConfig
	ProviderInputValues map[string]cty.Value

	SetProviderInputCalled bool
	SetProviderInputAddr   addrs.AbsProviderConfig
	SetProviderInputValues map[string]cty.Value

	ConfigureProviderFn func(
		addr addrs.AbsProviderConfig,
		cfg cty.Value) tfdiags.Diagnostics // overrides the other values below, if set
	ConfigureProviderCalled bool
	ConfigureProviderAddr   addrs.AbsProviderConfig
	ConfigureProviderConfig cty.Value
	ConfigureProviderDiags  tfdiags.Diagnostics

	ProvisionerCalled      bool
	ProvisionerName        string
	ProvisionerProvisioner provisioners.Interface

	ProvisionerSchemaCalled bool
	ProvisionerSchemaName   string
	ProvisionerSchemaSchema *configschema.Block
	ProvisionerSchemaError  error

	CloseProvisionersCalled bool

	EvaluateBlockCalled     bool
	EvaluateBlockBody       hcl.Body
	EvaluateBlockSchema     *configschema.Block
	EvaluateBlockSelf       addrs.Referenceable
	EvaluateBlockKeyData    InstanceKeyEvalData
	EvaluateBlockResultFunc func(
		body hcl.Body,
		schema *configschema.Block,
		self addrs.Referenceable,
		keyData InstanceKeyEvalData,
	) (cty.Value, hcl.Body, tfdiags.Diagnostics) // overrides the other values below, if set
	EvaluateBlockResult       cty.Value
	EvaluateBlockExpandedBody hcl.Body
	EvaluateBlockDiags        tfdiags.Diagnostics

	EvaluateExprCalled     bool
	EvaluateExprExpr       hcl.Expression
	EvaluateExprWantType   cty.Type
	EvaluateExprSelf       addrs.Referenceable
	EvaluateExprResultFunc func(
		expr hcl.Expression,
		wantType cty.Type,
		self addrs.Referenceable,
	) (cty.Value, tfdiags.Diagnostics) // overrides the other values below, if set
	EvaluateExprResult cty.Value
	EvaluateExprDiags  tfdiags.Diagnostics

	EvaluationScopeCalled  bool
	EvaluationScopeSelf    addrs.Referenceable
	EvaluationScopeKeyData InstanceKeyEvalData
	EvaluationScopeScope   *lang.Scope

	PathCalled bool
	PathPath   addrs.ModuleInstance

	SetRootModuleArgumentCalled bool
	SetRootModuleArgumentAddr   addrs.InputVariable
	SetRootModuleArgumentValue  cty.Value
	SetRootModuleArgumentFunc   func(addr addrs.InputVariable, v cty.Value)

	SetModuleCallArgumentCalled     bool
	SetModuleCallArgumentModuleCall addrs.ModuleCallInstance
	SetModuleCallArgumentVariable   addrs.InputVariable
	SetModuleCallArgumentValue      cty.Value
	SetModuleCallArgumentFunc       func(callAddr addrs.ModuleCallInstance, varAddr addrs.InputVariable, v cty.Value)

	GetVariableValueCalled bool
	GetVariableValueAddr   addrs.AbsInputVariableInstance
	GetVariableValueValue  cty.Value
	GetVariableValueFunc   func(addr addrs.AbsInputVariableInstance) cty.Value // supersedes GetVariableValueValue

	ChangesCalled  bool
	ChangesChanges *plans.ChangesSync

	StateCalled bool
	StateState  *states.SyncState

	ChecksCalled bool
	ChecksState  *checks.State

	RefreshStateCalled bool
	RefreshStateState  *states.SyncState

	PrevRunStateCalled bool
	PrevRunStateState  *states.SyncState

	MoveResultsCalled  bool
	MoveResultsResults refactoring.MoveResults

	ImportResolverCalled  bool
	ImportResolverResults *ImportResolver

	InstanceExpanderCalled   bool
	InstanceExpanderExpander *instances.Expander
}

MockEvalContext is a mock version of EvalContext that can be used for tests.

func (*MockEvalContext) Changes 

func (c *MockEvalContext) Changes() *plans.ChangesSync

func (*MockEvalContext) Checks 

func (c *MockEvalContext) Checks() *checks.State

func (*MockEvalContext) CloseProvider 

func (c *MockEvalContext) CloseProvider(addr addrs.AbsProviderConfig) error

func (*MockEvalContext) CloseProvisioners 

func (c *MockEvalContext) CloseProvisioners() error

func (*MockEvalContext) ConfigureProvider 

func (c *MockEvalContext) ConfigureProvider(addr addrs.AbsProviderConfig, cfg cty.Value) tfdiags.Diagnostics

func (*MockEvalContext) EvaluateBlock 

func (c *MockEvalContext) EvaluateBlock(body hcl.Body, schema *configschema.Block, self addrs.Referenceable, keyData InstanceKeyEvalData) (cty.Value, hcl.Body, tfdiags.Diagnostics)

func (*MockEvalContext) EvaluateExpr 

func (c *MockEvalContext) EvaluateExpr(expr hcl.Expression, wantType cty.Type, self addrs.Referenceable) (cty.Value, tfdiags.Diagnostics)

func (*MockEvalContext) EvaluateReplaceTriggeredBy 

func (c *MockEvalContext) EvaluateReplaceTriggeredBy(hcl.Expression, instances.RepetitionData) (*addrs.Reference, bool, tfdiags.Diagnostics)

func (*MockEvalContext) EvaluationScope 

func (c *MockEvalContext) EvaluationScope(self addrs.Referenceable, source addrs.Referenceable, keyData InstanceKeyEvalData) *lang.Scope

func (*MockEvalContext) GetEncryption 

func (c *MockEvalContext) GetEncryption() encryption.Encryption

func (*MockEvalContext) GetVariableValue 

func (c *MockEvalContext) GetVariableValue(addr addrs.AbsInputVariableInstance) cty.Value

func (*MockEvalContext) Hook 

func (c *MockEvalContext) Hook(fn func(Hook) (HookAction, error)) error

func (*MockEvalContext) ImportResolver 

func (c *MockEvalContext) ImportResolver() *ImportResolver

func (*MockEvalContext) InitProvider 

func (c *MockEvalContext) InitProvider(addr addrs.AbsProviderConfig) (providers.Interface, error)

func (*MockEvalContext) Input 

func (c *MockEvalContext) Input() UIInput

func (*MockEvalContext) InstanceExpander 

func (c *MockEvalContext) InstanceExpander() *instances.Expander

func (*MockEvalContext) MoveResults 

func (c *MockEvalContext) MoveResults() refactoring.MoveResults

func (*MockEvalContext) Path 

func (c *MockEvalContext) Path() addrs.ModuleInstance

func (*MockEvalContext) PrevRunState 

func (c *MockEvalContext) PrevRunState() *states.SyncState

func (*MockEvalContext) Provider 

func (c *MockEvalContext) Provider(addr addrs.AbsProviderConfig) providers.Interface

func (*MockEvalContext) ProviderInput 

func (c *MockEvalContext) ProviderInput(addr addrs.AbsProviderConfig) map[string]cty.Value

func (*MockEvalContext) ProviderSchema 

func (c *MockEvalContext) ProviderSchema(addr addrs.AbsProviderConfig) (providers.ProviderSchema, error)

func (*MockEvalContext) Provisioner 

func (c *MockEvalContext) Provisioner(n string) (provisioners.Interface, error)

func (*MockEvalContext) ProvisionerSchema 

func (c *MockEvalContext) ProvisionerSchema(n string) (*configschema.Block, error)

func (*MockEvalContext) RefreshState 

func (c *MockEvalContext) RefreshState() *states.SyncState

func (*MockEvalContext) SetModuleCallArgument 

func (c *MockEvalContext) SetModuleCallArgument(callAddr addrs.ModuleCallInstance, varAddr addrs.InputVariable, v cty.Value)

func (*MockEvalContext) SetProviderInput 

func (c *MockEvalContext) SetProviderInput(addr addrs.AbsProviderConfig, vals map[string]cty.Value)

func (*MockEvalContext) SetRootModuleArgument 

func (c *MockEvalContext) SetRootModuleArgument(addr addrs.InputVariable, v cty.Value)

func (*MockEvalContext) State 

func (c *MockEvalContext) State() *states.SyncState

func (*MockEvalContext) Stopped 

func (c *MockEvalContext) Stopped() <-chan struct{}

func (*MockEvalContext) WithPath 

func (c *MockEvalContext) WithPath(path addrs.ModuleInstance) EvalContext

type MockHook 

type MockHook struct {
	sync.Mutex

	PreApplyCalled       bool
	PreApplyAddr         addrs.AbsResourceInstance
	PreApplyGen          states.Generation
	PreApplyAction       plans.Action
	PreApplyPriorState   cty.Value
	PreApplyPlannedState cty.Value
	PreApplyReturn       HookAction
	PreApplyError        error

	PostApplyCalled      bool
	PostApplyAddr        addrs.AbsResourceInstance
	PostApplyGen         states.Generation
	PostApplyNewState    cty.Value
	PostApplyError       error
	PostApplyReturn      HookAction
	PostApplyReturnError error
	PostApplyFn          func(addrs.AbsResourceInstance, states.Generation, cty.Value, error) (HookAction, error)

	PreDiffCalled        bool
	PreDiffAddr          addrs.AbsResourceInstance
	PreDiffGen           states.Generation
	PreDiffPriorState    cty.Value
	PreDiffProposedState cty.Value
	PreDiffReturn        HookAction
	PreDiffError         error

	PostDiffCalled       bool
	PostDiffAddr         addrs.AbsResourceInstance
	PostDiffGen          states.Generation
	PostDiffAction       plans.Action
	PostDiffPriorState   cty.Value
	PostDiffPlannedState cty.Value
	PostDiffReturn       HookAction
	PostDiffError        error

	PreProvisionInstanceCalled bool
	PreProvisionInstanceAddr   addrs.AbsResourceInstance
	PreProvisionInstanceState  cty.Value
	PreProvisionInstanceReturn HookAction
	PreProvisionInstanceError  error

	PostProvisionInstanceCalled bool
	PostProvisionInstanceAddr   addrs.AbsResourceInstance
	PostProvisionInstanceState  cty.Value
	PostProvisionInstanceReturn HookAction
	PostProvisionInstanceError  error

	PreProvisionInstanceStepCalled          bool
	PreProvisionInstanceStepAddr            addrs.AbsResourceInstance
	PreProvisionInstanceStepProvisionerType string
	PreProvisionInstanceStepReturn          HookAction
	PreProvisionInstanceStepError           error

	PostProvisionInstanceStepCalled          bool
	PostProvisionInstanceStepAddr            addrs.AbsResourceInstance
	PostProvisionInstanceStepProvisionerType string
	PostProvisionInstanceStepErrorArg        error
	PostProvisionInstanceStepReturn          HookAction
	PostProvisionInstanceStepError           error

	ProvisionOutputCalled          bool
	ProvisionOutputAddr            addrs.AbsResourceInstance
	ProvisionOutputProvisionerType string
	ProvisionOutputMessage         string

	PreRefreshCalled     bool
	PreRefreshAddr       addrs.AbsResourceInstance
	PreRefreshGen        states.Generation
	PreRefreshPriorState cty.Value
	PreRefreshReturn     HookAction
	PreRefreshError      error

	PostRefreshCalled     bool
	PostRefreshAddr       addrs.AbsResourceInstance
	PostRefreshGen        states.Generation
	PostRefreshPriorState cty.Value
	PostRefreshNewState   cty.Value
	PostRefreshReturn     HookAction
	PostRefreshError      error

	PreImportStateCalled bool
	PreImportStateAddr   addrs.AbsResourceInstance
	PreImportStateID     string
	PreImportStateReturn HookAction
	PreImportStateError  error

	PostImportStateCalled    bool
	PostImportStateAddr      addrs.AbsResourceInstance
	PostImportStateNewStates []providers.ImportedResource
	PostImportStateReturn    HookAction
	PostImportStateError     error

	PrePlanImportCalled bool
	PrePlanImportAddr   addrs.AbsResourceInstance
	PrePlanImportReturn HookAction
	PrePlanImportError  error

	PostPlanImportAddr   addrs.AbsResourceInstance
	PostPlanImportCalled bool
	PostPlanImportReturn HookAction
	PostPlanImportError  error

	PreApplyImportCalled bool
	PreApplyImportAddr   addrs.AbsResourceInstance
	PreApplyImportReturn HookAction
	PreApplyImportError  error

	PostApplyImportCalled bool
	PostApplyImportAddr   addrs.AbsResourceInstance
	PostApplyImportReturn HookAction
	PostApplyImportError  error

	StoppingCalled bool

	PostStateUpdateCalled bool
	PostStateUpdateState  *states.State
	PostStateUpdateReturn HookAction
	PostStateUpdateError  error
}

MockHook is an implementation of Hook that can be used for tests. It records all of its function calls.

func (*MockHook) PostApply 

func (h *MockHook) PostApply(addr addrs.AbsResourceInstance, gen states.Generation, newState cty.Value, err error) (HookAction, error)

func (*MockHook) PostApplyImport 

func (h *MockHook) PostApplyImport(addr addrs.AbsResourceInstance, importing plans.ImportingSrc) (HookAction, error)

func (*MockHook) PostDiff 

func (h *MockHook) PostDiff(addr addrs.AbsResourceInstance, gen states.Generation, action plans.Action, priorState, plannedNewState cty.Value) (HookAction, error)

func (*MockHook) PostImportState 

func (h *MockHook) PostImportState(addr addrs.AbsResourceInstance, imported []providers.ImportedResource) (HookAction, error)

func (*MockHook) PostPlanImport 

func (h *MockHook) PostPlanImport(addr addrs.AbsResourceInstance, imported []providers.ImportedResource) (HookAction, error)

func (*MockHook) PostProvisionInstance 

func (h *MockHook) PostProvisionInstance(addr addrs.AbsResourceInstance, state cty.Value) (HookAction, error)

func (*MockHook) PostProvisionInstanceStep 

func (h *MockHook) PostProvisionInstanceStep(addr addrs.AbsResourceInstance, typeName string, err error) (HookAction, error)

func (*MockHook) PostRefresh 

func (h *MockHook) PostRefresh(addr addrs.AbsResourceInstance, gen states.Generation, priorState cty.Value, newState cty.Value) (HookAction, error)

func (*MockHook) PostStateUpdate 

func (h *MockHook) PostStateUpdate(new *states.State) (HookAction, error)

func (*MockHook) PreApply 

func (h *MockHook) PreApply(addr addrs.AbsResourceInstance, gen states.Generation, action plans.Action, priorState, plannedNewState cty.Value) (HookAction, error)

func (*MockHook) PreApplyImport 

func (h *MockHook) PreApplyImport(addr addrs.AbsResourceInstance, importing plans.ImportingSrc) (HookAction, error)

func (*MockHook) PreDiff 

func (h *MockHook) PreDiff(addr addrs.AbsResourceInstance, gen states.Generation, priorState, proposedNewState cty.Value) (HookAction, error)

func (*MockHook) PreImportState 

func (h *MockHook) PreImportState(addr addrs.AbsResourceInstance, importID string) (HookAction, error)

func (*MockHook) PrePlanImport 

func (h *MockHook) PrePlanImport(addr addrs.AbsResourceInstance, importID string) (HookAction, error)

func (*MockHook) PreProvisionInstance 

func (h *MockHook) PreProvisionInstance(addr addrs.AbsResourceInstance, state cty.Value) (HookAction, error)

func (*MockHook) PreProvisionInstanceStep 

func (h *MockHook) PreProvisionInstanceStep(addr addrs.AbsResourceInstance, typeName string) (HookAction, error)

func (*MockHook) PreRefresh 

func (h *MockHook) PreRefresh(addr addrs.AbsResourceInstance, gen states.Generation, priorState cty.Value) (HookAction, error)

func (*MockHook) ProvisionOutput 

func (h *MockHook) ProvisionOutput(addr addrs.AbsResourceInstance, typeName string, line string)

func (*MockHook) Stopping 

func (h *MockHook) Stopping()

type MockProvider 

type MockProvider struct {
	sync.Mutex

	// Anything you want, in case you need to store extra data with the mock.
	Meta interface{}

	GetProviderSchemaCalled   bool
	GetProviderSchemaResponse *providers.GetProviderSchemaResponse

	ValidateProviderConfigCalled   bool
	ValidateProviderConfigResponse *providers.ValidateProviderConfigResponse
	ValidateProviderConfigRequest  providers.ValidateProviderConfigRequest
	ValidateProviderConfigFn       func(providers.ValidateProviderConfigRequest) providers.ValidateProviderConfigResponse

	ValidateResourceConfigCalled   bool
	ValidateResourceConfigTypeName string
	ValidateResourceConfigResponse *providers.ValidateResourceConfigResponse
	ValidateResourceConfigRequest  providers.ValidateResourceConfigRequest
	ValidateResourceConfigFn       func(providers.ValidateResourceConfigRequest) providers.ValidateResourceConfigResponse

	ValidateDataResourceConfigCalled   bool
	ValidateDataResourceConfigTypeName string
	ValidateDataResourceConfigResponse *providers.ValidateDataResourceConfigResponse
	ValidateDataResourceConfigRequest  providers.ValidateDataResourceConfigRequest
	ValidateDataResourceConfigFn       func(providers.ValidateDataResourceConfigRequest) providers.ValidateDataResourceConfigResponse

	UpgradeResourceStateCalled   bool
	UpgradeResourceStateTypeName string
	UpgradeResourceStateResponse *providers.UpgradeResourceStateResponse
	UpgradeResourceStateRequest  providers.UpgradeResourceStateRequest
	UpgradeResourceStateFn       func(providers.UpgradeResourceStateRequest) providers.UpgradeResourceStateResponse

	ConfigureProviderCalled   bool
	ConfigureProviderResponse *providers.ConfigureProviderResponse
	ConfigureProviderRequest  providers.ConfigureProviderRequest
	ConfigureProviderFn       func(providers.ConfigureProviderRequest) providers.ConfigureProviderResponse

	StopCalled   bool
	StopFn       func() error
	StopResponse error

	ReadResourceCalled   bool
	ReadResourceResponse *providers.ReadResourceResponse
	ReadResourceRequest  providers.ReadResourceRequest
	ReadResourceFn       func(providers.ReadResourceRequest) providers.ReadResourceResponse

	PlanResourceChangeCalled   bool
	PlanResourceChangeResponse *providers.PlanResourceChangeResponse
	PlanResourceChangeRequest  providers.PlanResourceChangeRequest
	PlanResourceChangeFn       func(providers.PlanResourceChangeRequest) providers.PlanResourceChangeResponse

	ApplyResourceChangeCalled   bool
	ApplyResourceChangeResponse *providers.ApplyResourceChangeResponse
	ApplyResourceChangeRequest  providers.ApplyResourceChangeRequest
	ApplyResourceChangeFn       func(providers.ApplyResourceChangeRequest) providers.ApplyResourceChangeResponse

	ImportResourceStateCalled   bool
	ImportResourceStateResponse *providers.ImportResourceStateResponse
	ImportResourceStateRequest  providers.ImportResourceStateRequest
	ImportResourceStateFn       func(providers.ImportResourceStateRequest) providers.ImportResourceStateResponse

	ReadDataSourceCalled   bool
	ReadDataSourceResponse *providers.ReadDataSourceResponse
	ReadDataSourceRequest  providers.ReadDataSourceRequest
	ReadDataSourceFn       func(providers.ReadDataSourceRequest) providers.ReadDataSourceResponse

	GetFunctionsCalled   bool
	GetFunctionsResponse *providers.GetFunctionsResponse
	GetFunctionsFn       func() providers.GetFunctionsResponse

	CallFunctionCalled   bool
	CallFunctionResponse *providers.CallFunctionResponse
	CallFunctionRequest  providers.CallFunctionRequest
	CallFunctionFn       func(providers.CallFunctionRequest) providers.CallFunctionResponse

	CloseCalled bool
	CloseError  error
}

MockProvider implements providers.Interface but mocks out all the calls for testing purposes.

func (*MockProvider) ApplyResourceChange 

func (p *MockProvider) ApplyResourceChange(r providers.ApplyResourceChangeRequest) (resp providers.ApplyResourceChangeResponse)

func (*MockProvider) CallFunction 

func (p *MockProvider) CallFunction(r providers.CallFunctionRequest) (resp providers.CallFunctionResponse)

func (*MockProvider) Close 

func (p *MockProvider) Close() error

func (*MockProvider) ConfigureProvider 

func (p *MockProvider) ConfigureProvider(r providers.ConfigureProviderRequest) (resp providers.ConfigureProviderResponse)

func (*MockProvider) GetFunctions 

func (p *MockProvider) GetFunctions() (resp providers.GetFunctionsResponse)

func (*MockProvider) GetProviderSchema 

func (p *MockProvider) GetProviderSchema() providers.GetProviderSchemaResponse

func (*MockProvider) ImportResourceState 

func (p *MockProvider) ImportResourceState(r providers.ImportResourceStateRequest) (resp providers.ImportResourceStateResponse)

func (*MockProvider) PlanResourceChange 

func (p *MockProvider) PlanResourceChange(r providers.PlanResourceChangeRequest) (resp providers.PlanResourceChangeResponse)

func (*MockProvider) ReadDataSource 

func (p *MockProvider) ReadDataSource(r providers.ReadDataSourceRequest) (resp providers.ReadDataSourceResponse)

func (*MockProvider) ReadResource 

func (p *MockProvider) ReadResource(r providers.ReadResourceRequest) (resp providers.ReadResourceResponse)

func (*MockProvider) Stop 

func (p *MockProvider) Stop() error

func (*MockProvider) UpgradeResourceState 

func (p *MockProvider) UpgradeResourceState(r providers.UpgradeResourceStateRequest) (resp providers.UpgradeResourceStateResponse)

func (*MockProvider) ValidateDataResourceConfig 

func (p *MockProvider) ValidateDataResourceConfig(r providers.ValidateDataResourceConfigRequest) (resp providers.ValidateDataResourceConfigResponse)

func (*MockProvider) ValidateProviderConfig 

func (p *MockProvider) ValidateProviderConfig(r providers.ValidateProviderConfigRequest) (resp providers.ValidateProviderConfigResponse)

func (*MockProvider) ValidateResourceConfig 

func (p *MockProvider) ValidateResourceConfig(r providers.ValidateResourceConfigRequest) (resp providers.ValidateResourceConfigResponse)

type MockProvisioner 

type MockProvisioner struct {
	sync.Mutex
	// Anything you want, in case you need to store extra data with the mock.
	Meta interface{}

	GetSchemaCalled   bool
	GetSchemaResponse provisioners.GetSchemaResponse

	ValidateProvisionerConfigCalled   bool
	ValidateProvisionerConfigRequest  provisioners.ValidateProvisionerConfigRequest
	ValidateProvisionerConfigResponse provisioners.ValidateProvisionerConfigResponse
	ValidateProvisionerConfigFn       func(provisioners.ValidateProvisionerConfigRequest) provisioners.ValidateProvisionerConfigResponse

	ProvisionResourceCalled   bool
	ProvisionResourceRequest  provisioners.ProvisionResourceRequest
	ProvisionResourceResponse provisioners.ProvisionResourceResponse
	ProvisionResourceFn       func(provisioners.ProvisionResourceRequest) provisioners.ProvisionResourceResponse

	StopCalled   bool
	StopResponse error
	StopFn       func() error

	CloseCalled   bool
	CloseResponse error
	CloseFn       func() error
}

MockProvisioner implements provisioners.Interface but mocks out all the calls for testing purposes.

func (*MockProvisioner) Close 

func (p *MockProvisioner) Close() error

func (*MockProvisioner) GetSchema 

func (p *MockProvisioner) GetSchema() provisioners.GetSchemaResponse

func (*MockProvisioner) ProvisionResource 

func (p *MockProvisioner) ProvisionResource(r provisioners.ProvisionResourceRequest) provisioners.ProvisionResourceResponse

func (*MockProvisioner) Stop 

func (p *MockProvisioner) Stop() error

func (*MockProvisioner) ValidateProvisionerConfig 

func (p *MockProvisioner) ValidateProvisionerConfig(r provisioners.ValidateProvisionerConfigRequest) provisioners.ValidateProvisionerConfigResponse

type MockUIInput 

type MockUIInput struct {
	InputCalled       bool
	InputOpts         *InputOpts
	InputReturnMap    map[string]string
	InputReturnString string
	InputReturnError  error
	InputFn           func(*InputOpts) (string, error)
}

MockUIInput is an implementation of UIInput that can be used for tests.

func (*MockUIInput) Input 

func (i *MockUIInput) Input(ctx context.Context, opts *InputOpts) (string, error)

type MockUIOutput 

type MockUIOutput struct {
	sync.Mutex
	OutputCalled  bool
	OutputMessage string
	OutputFn      func(string)
}

MockUIOutput is an implementation of UIOutput that can be used for tests.

func (*MockUIOutput) Output 

func (o *MockUIOutput) Output(v string)

type ModuleExpansionTransformer 

type ModuleExpansionTransformer struct {
	Config *configs.Config

	// Concrete allows injection of a wrapped module node by the graph builder
	// to alter the evaluation behavior.
	Concrete ConcreteModuleNodeFunc
	// contains filtered or unexported fields
}

ModuleExpansionTransformer is a GraphTransformer that adds graph nodes representing the possible expansion of each module call in the configuration, and ensures that any nodes representing objects declared within a module are dependent on the expansion node so that they will be visited only after the module expansion has been decided.

This transform must be applied only after all nodes representing objects that can be contained within modules have already been added.

func (*ModuleExpansionTransformer) Transform 

func (t *ModuleExpansionTransformer) Transform(g *Graph) error

type ModuleVariableTransformer 

type ModuleVariableTransformer struct {
	Config *configs.Config
}

ModuleVariableTransformer is a GraphTransformer that adds all the variables in the configuration to the graph.

Any "variable" block present in any non-root module is included here, even if a particular variable is not referenced from anywhere.

The transform will produce errors if a call to a module does not conform to the expected set of arguments, but this transformer is not in a good position to return errors and so the validate walk should include specific steps for validating module blocks, separate from this transform.

func (*ModuleVariableTransformer) Transform 

func (t *ModuleVariableTransformer) Transform(g *Graph) error

type NilHook 

type NilHook struct{}

NilHook is a Hook implementation that does nothing. It exists only to simplify implementing hooks. You can embed this into your Hook implementation and only implement the functions you are interested in.

func (*NilHook) PostApply 

func (*NilHook) PostApply(addr addrs.AbsResourceInstance, gen states.Generation, newState cty.Value, err error) (HookAction, error)

func (*NilHook) PostApplyImport 

func (h *NilHook) PostApplyImport(addr addrs.AbsResourceInstance, importing plans.ImportingSrc) (HookAction, error)

func (*NilHook) PostDiff 

func (*NilHook) PostDiff(addr addrs.AbsResourceInstance, gen states.Generation, action plans.Action, priorState, plannedNewState cty.Value) (HookAction, error)

func (*NilHook) PostImportState 

func (*NilHook) PostImportState(addr addrs.AbsResourceInstance, imported []providers.ImportedResource) (HookAction, error)

func (*NilHook) PostPlanImport 

func (h *NilHook) PostPlanImport(addr addrs.AbsResourceInstance, imported []providers.ImportedResource) (HookAction, error)

func (*NilHook) PostProvisionInstance 

func (*NilHook) PostProvisionInstance(addr addrs.AbsResourceInstance, state cty.Value) (HookAction, error)

func (*NilHook) PostProvisionInstanceStep 

func (*NilHook) PostProvisionInstanceStep(addr addrs.AbsResourceInstance, typeName string, err error) (HookAction, error)

func (*NilHook) PostRefresh 

func (*NilHook) PostRefresh(addr addrs.AbsResourceInstance, gen states.Generation, priorState cty.Value, newState cty.Value) (HookAction, error)

func (*NilHook) PostStateUpdate 

func (*NilHook) PostStateUpdate(new *states.State) (HookAction, error)

func (*NilHook) PreApply 

func (*NilHook) PreApply(addr addrs.AbsResourceInstance, gen states.Generation, action plans.Action, priorState, plannedNewState cty.Value) (HookAction, error)

func (*NilHook) PreApplyImport 

func (h *NilHook) PreApplyImport(addr addrs.AbsResourceInstance, importing plans.ImportingSrc) (HookAction, error)

func (*NilHook) PreDiff 

func (*NilHook) PreDiff(addr addrs.AbsResourceInstance, gen states.Generation, priorState, proposedNewState cty.Value) (HookAction, error)

func (*NilHook) PreImportState 

func (*NilHook) PreImportState(addr addrs.AbsResourceInstance, importID string) (HookAction, error)

func (*NilHook) PrePlanImport 

func (h *NilHook) PrePlanImport(addr addrs.AbsResourceInstance, importID string) (HookAction, error)

func (*NilHook) PreProvisionInstance 

func (*NilHook) PreProvisionInstance(addr addrs.AbsResourceInstance, state cty.Value) (HookAction, error)

func (*NilHook) PreProvisionInstanceStep 

func (*NilHook) PreProvisionInstanceStep(addr addrs.AbsResourceInstance, typeName string) (HookAction, error)

func (*NilHook) PreRefresh 

func (*NilHook) PreRefresh(addr addrs.AbsResourceInstance, gen states.Generation, priorState cty.Value) (HookAction, error)

func (*NilHook) ProvisionOutput 

func (*NilHook) ProvisionOutput(addr addrs.AbsResourceInstance, typeName string, line string)

func (*NilHook) Stopping 

func (*NilHook) Stopping()

type NodeAbstractProvider 

type NodeAbstractProvider struct {
	Addr addrs.AbsProviderConfig

	Config *configs.Provider
	Schema *configschema.Block
}

NodeAbstractProvider represents a provider that has no associated operations. It registers all the common interfaces across operations for providers.

func (*NodeAbstractProvider) AttachProvider 

func (n *NodeAbstractProvider) AttachProvider(c *configs.Provider)

GraphNodeAttachProvider

func (*NodeAbstractProvider) AttachProviderConfigSchema 

func (n *NodeAbstractProvider) AttachProviderConfigSchema(schema *configschema.Block)

GraphNodeAttachProviderConfigSchema impl.

func (*NodeAbstractProvider) DotNode 

func (n *NodeAbstractProvider) DotNode(name string, opts *dag.DotOpts) *dag.DotNode

GraphNodeDotter impl.

func (*NodeAbstractProvider) ModulePath 

func (n *NodeAbstractProvider) ModulePath() addrs.Module

GraphNodeModulePath

func (*NodeAbstractProvider) Name 

func (n *NodeAbstractProvider) Name() string

func (*NodeAbstractProvider) Path 

func (n *NodeAbstractProvider) Path() addrs.ModuleInstance

GraphNodeModuleInstance

func (*NodeAbstractProvider) ProviderAddr 

func (n *NodeAbstractProvider) ProviderAddr() addrs.AbsProviderConfig

GraphNodeProvider

func (*NodeAbstractProvider) ProviderConfig 

func (n *NodeAbstractProvider) ProviderConfig() *configs.Provider

GraphNodeProvider

func (*NodeAbstractProvider) References 

func (n *NodeAbstractProvider) References() []*addrs.Reference

GraphNodeReferencer

type NodeAbstractResource 

type NodeAbstractResource struct {
	Addr addrs.ConfigResource

	Schema        *configschema.Block // Schema for processing the configuration body
	SchemaVersion uint64              // Schema version of "Schema", as decided by the provider
	Config        *configs.Resource   // Config is the resource in the config

	// ProviderMetas is the provider_meta configs for the module this resource belongs to
	ProviderMetas map[addrs.Provider]*configs.ProviderMeta

	ProvisionerSchemas map[string]*configschema.Block

	// Set from GraphNodeTargetable
	Targets []addrs.Targetable

	// The address of the provider this resource will use
	ResolvedProvider addrs.AbsProviderConfig
	// contains filtered or unexported fields
}

NodeAbstractResource represents a resource that has no associated operations. It registers all the interfaces for a resource that common across multiple operation types.

func NewNodeAbstractResource 

func NewNodeAbstractResource(addr addrs.ConfigResource) *NodeAbstractResource

NewNodeAbstractResource creates an abstract resource graph node for the given absolute resource address.

func (*NodeAbstractResource) AttachDataResourceDependsOn 

func (n *NodeAbstractResource) AttachDataResourceDependsOn(deps []addrs.ConfigResource, force bool)

graphNodeAttachDataResourceDependsOn

func (*NodeAbstractResource) AttachProviderMetaConfigs 

func (n *NodeAbstractResource) AttachProviderMetaConfigs(c map[addrs.Provider]*configs.ProviderMeta)

GraphNodeAttachProviderMetaConfigs impl

func (*NodeAbstractResource) AttachProvisionerSchema 

func (n *NodeAbstractResource) AttachProvisionerSchema(name string, schema *configschema.Block)

GraphNodeProvisionerConsumer

func (*NodeAbstractResource) AttachResourceConfig 

func (n *NodeAbstractResource) AttachResourceConfig(c *configs.Resource)

GraphNodeAttachResourceConfig

func (*NodeAbstractResource) AttachResourceSchema 

func (n *NodeAbstractResource) AttachResourceSchema(schema *configschema.Block, version uint64)

GraphNodeAttachResourceSchema impl

func (*NodeAbstractResource) DependsOn 

func (n *NodeAbstractResource) DependsOn() []*addrs.Reference

func (*NodeAbstractResource) DotNode 

func (n *NodeAbstractResource) DotNode(name string, opts *dag.DotOpts) *dag.DotNode

GraphNodeDotter impl.

func (*NodeAbstractResource) ModulePath 

func (n *NodeAbstractResource) ModulePath() addrs.Module

GraphNodeModulePath

func (*NodeAbstractResource) Name 

func (n *NodeAbstractResource) Name() string

func (*NodeAbstractResource) ProvidedBy 

func (n *NodeAbstractResource) ProvidedBy() (addrs.ProviderConfig, bool)

GraphNodeProviderConsumer

func (*NodeAbstractResource) Provider 

func (n *NodeAbstractResource) Provider() addrs.Provider

GraphNodeProviderConsumer

func (*NodeAbstractResource) ProvisionedBy 

func (n *NodeAbstractResource) ProvisionedBy() []string

GraphNodeProvisionerConsumer

func (*NodeAbstractResource) ReferenceableAddrs 

func (n *NodeAbstractResource) ReferenceableAddrs() []addrs.Referenceable

GraphNodeReferenceable

func (*NodeAbstractResource) References 

func (n *NodeAbstractResource) References() []*addrs.Reference

GraphNodeReferencer

func (*NodeAbstractResource) ResourceAddr 

func (n *NodeAbstractResource) ResourceAddr() addrs.ConfigResource

GraphNodeResource

func (*NodeAbstractResource) RootReferences 

func (n *NodeAbstractResource) RootReferences() []*addrs.Reference

func (*NodeAbstractResource) SetProvider 

func (n *NodeAbstractResource) SetProvider(p addrs.AbsProviderConfig)

func (*NodeAbstractResource) SetTargets 

func (n *NodeAbstractResource) SetTargets(targets []addrs.Targetable)

GraphNodeTargetable

type NodeAbstractResourceInstance 

type NodeAbstractResourceInstance struct {
	NodeAbstractResource
	Addr addrs.AbsResourceInstance

	Dependencies []addrs.ConfigResource
	// contains filtered or unexported fields
}

NodeAbstractResourceInstance represents a resource instance with no associated operations. It embeds NodeAbstractResource but additionally contains an instance key, used to identify one of potentially many instances that were created from a resource in configuration, e.g. using the "count" or "for_each" arguments.

func NewNodeAbstractResourceInstance 

func NewNodeAbstractResourceInstance(addr addrs.AbsResourceInstance) *NodeAbstractResourceInstance

NewNodeAbstractResourceInstance creates an abstract resource instance graph node for the given absolute resource instance address.

func (*NodeAbstractResourceInstance) AttachResourceState 

func (n *NodeAbstractResourceInstance) AttachResourceState(s *states.Resource)

GraphNodeAttachResourceState

func (*NodeAbstractResourceInstance) Name 

func (n *NodeAbstractResourceInstance) Name() string

func (*NodeAbstractResourceInstance) Path 

func (n *NodeAbstractResourceInstance) Path() addrs.ModuleInstance

func (*NodeAbstractResourceInstance) ReferenceableAddrs 

func (n *NodeAbstractResourceInstance) ReferenceableAddrs() []addrs.Referenceable

GraphNodeReferenceable

func (*NodeAbstractResourceInstance) References 

func (n *NodeAbstractResourceInstance) References() []*addrs.Reference

GraphNodeReferencer

func (*NodeAbstractResourceInstance) ResourceInstanceAddr 

func (n *NodeAbstractResourceInstance) ResourceInstanceAddr() addrs.AbsResourceInstance

GraphNodeResourceInstance

func (*NodeAbstractResourceInstance) StateDependencies 

func (n *NodeAbstractResourceInstance) StateDependencies() []addrs.ConfigResource

StateDependencies returns the dependencies which will be saved in the state for managed resources, or the most current dependencies for data resources.

type NodeApplyableOutput 

type NodeApplyableOutput struct {
	Addr   addrs.AbsOutputValue
	Config *configs.Output // Config is the output in the config
	// If this is being evaluated during apply, we may have a change recorded already
	Change *plans.OutputChangeSrc

	// Refresh-only mode means that any failing output preconditions are
	// reported as warnings rather than errors
	RefreshOnly bool

	// DestroyApply indicates that we are applying a destroy plan, and do not
	// need to account for conditional blocks.
	DestroyApply bool

	Planning bool
}

NodeApplyableOutput represents an output that is "applyable": it is ready to be applied.

func (*NodeApplyableOutput) DotNode 

func (n *NodeApplyableOutput) DotNode(name string, opts *dag.DotOpts) *dag.DotNode

dag.GraphNodeDotter impl.

func (*NodeApplyableOutput) Execute 

func (n *NodeApplyableOutput) Execute(ctx EvalContext, op walkOperation) (diags tfdiags.Diagnostics)

GraphNodeExecutable

func (*NodeApplyableOutput) ModulePath 

func (n *NodeApplyableOutput) ModulePath() addrs.Module

GraphNodeModulePath

func (*NodeApplyableOutput) Name 

func (n *NodeApplyableOutput) Name() string

func (*NodeApplyableOutput) Path 

func (n *NodeApplyableOutput) Path() addrs.ModuleInstance

GraphNodeModuleInstance

func (*NodeApplyableOutput) ReferenceOutside 

func (n *NodeApplyableOutput) ReferenceOutside() (selfPath, referencePath addrs.Module)

GraphNodeReferenceOutside implementation

func (*NodeApplyableOutput) ReferenceableAddrs 

func (n *NodeApplyableOutput) ReferenceableAddrs() []addrs.Referenceable

GraphNodeReferenceable

func (*NodeApplyableOutput) References 

func (n *NodeApplyableOutput) References() []*addrs.Reference

GraphNodeReferencer

type NodeApplyableProvider 

type NodeApplyableProvider struct {
	*NodeAbstractProvider
}

NodeApplyableProvider represents a provider during an apply.

func (*NodeApplyableProvider) ConfigureProvider 

func (n *NodeApplyableProvider) ConfigureProvider(ctx EvalContext, provider providers.Interface, verifyConfigIsKnown bool) (diags tfdiags.Diagnostics)

ConfigureProvider configures a provider that is already initialized and retrieved. If verifyConfigIsKnown is true, ConfigureProvider will return an error if the provider configVal is not wholly known and is meant only for use during import.

func (*NodeApplyableProvider) Execute 

func (n *NodeApplyableProvider) Execute(ctx EvalContext, op walkOperation) (diags tfdiags.Diagnostics)

GraphNodeExecutable

func (*NodeApplyableProvider) ValidateProvider 

func (n *NodeApplyableProvider) ValidateProvider(ctx EvalContext, provider providers.Interface) (diags tfdiags.Diagnostics)

type NodeApplyableResourceInstance 

type NodeApplyableResourceInstance struct {
	*NodeAbstractResourceInstance

	// If this node is forced to be CreateBeforeDestroy, we need to record that
	// in the state to.
	ForceCreateBeforeDestroy bool
	// contains filtered or unexported fields
}

NodeApplyableResourceInstance represents a resource instance that is "applyable": it is ready to be applied and is represented by a diff.

This node is for a specific instance of a resource. It will usually be accompanied in the graph by a NodeApplyableResource representing its containing resource, and should depend on that node to ensure that the state is properly prepared to receive changes to instances.

func (*NodeApplyableResourceInstance) AttachDependencies 

func (n *NodeApplyableResourceInstance) AttachDependencies(deps []addrs.ConfigResource)

GraphNodeAttachDependencies

func (*NodeApplyableResourceInstance) CreateAddr 

func (n *NodeApplyableResourceInstance) CreateAddr() *addrs.AbsResourceInstance

GraphNodeCreator

func (*NodeApplyableResourceInstance) CreateBeforeDestroy 

func (n *NodeApplyableResourceInstance) CreateBeforeDestroy() bool

CreateBeforeDestroy returns this node's CreateBeforeDestroy status.

func (*NodeApplyableResourceInstance) Execute 

func (n *NodeApplyableResourceInstance) Execute(ctx EvalContext, op walkOperation) (diags tfdiags.Diagnostics)

GraphNodeExecutable

func (*NodeApplyableResourceInstance) ModifyCreateBeforeDestroy 

func (n *NodeApplyableResourceInstance) ModifyCreateBeforeDestroy(v bool) error

func (*NodeApplyableResourceInstance) References 

func (n *NodeApplyableResourceInstance) References() []*addrs.Reference

GraphNodeReferencer, overriding NodeAbstractResourceInstance

func (*NodeApplyableResourceInstance) SetPreallocatedDeposedKey 

func (n *NodeApplyableResourceInstance) SetPreallocatedDeposedKey(key states.DeposedKey)

type NodeDestroyDeposedResourceInstanceObject 

type NodeDestroyDeposedResourceInstanceObject struct {
	*NodeAbstractResourceInstance
	DeposedKey states.DeposedKey
}

NodeDestroyDeposedResourceInstanceObject represents deposed resource instance objects during apply. Nodes of this type are inserted by DiffTransformer when the planned changeset contains "delete" changes for deposed instance objects, and its only supported operation is to destroy and then forget the associated object.

func (*NodeDestroyDeposedResourceInstanceObject) CreateBeforeDestroy 

func (n *NodeDestroyDeposedResourceInstanceObject) CreateBeforeDestroy() bool

GraphNodeDestroyerCBD

func (*NodeDestroyDeposedResourceInstanceObject) DeposedInstanceObjectKey 

func (n *NodeDestroyDeposedResourceInstanceObject) DeposedInstanceObjectKey() states.DeposedKey

func (*NodeDestroyDeposedResourceInstanceObject) DestroyAddr 

func (n *NodeDestroyDeposedResourceInstanceObject) DestroyAddr() *addrs.AbsResourceInstance

GraphNodeDestroyer

func (*NodeDestroyDeposedResourceInstanceObject) Execute 

func (n *NodeDestroyDeposedResourceInstanceObject) Execute(ctx EvalContext, op walkOperation) (diags tfdiags.Diagnostics)

GraphNodeExecutable impl.

func (*NodeDestroyDeposedResourceInstanceObject) ModifyCreateBeforeDestroy 

func (n *NodeDestroyDeposedResourceInstanceObject) ModifyCreateBeforeDestroy(v bool) error

GraphNodeDestroyerCBD

func (*NodeDestroyDeposedResourceInstanceObject) Name 

func (n *NodeDestroyDeposedResourceInstanceObject) Name() string

func (*NodeDestroyDeposedResourceInstanceObject) ReferenceableAddrs 

func (n *NodeDestroyDeposedResourceInstanceObject) ReferenceableAddrs() []addrs.Referenceable

GraphNodeReferenceable implementation, overriding the one from NodeAbstractResourceInstance

func (*NodeDestroyDeposedResourceInstanceObject) References 

func (n *NodeDestroyDeposedResourceInstanceObject) References() []*addrs.Reference

GraphNodeReferencer implementation, overriding the one from NodeAbstractResourceInstance

type NodeDestroyResourceInstance 

type NodeDestroyResourceInstance struct {
	*NodeAbstractResourceInstance

	// If DeposedKey is set to anything other than states.NotDeposed then
	// this node destroys a deposed object of the associated instance
	// rather than its current object.
	DeposedKey states.DeposedKey
}

NodeDestroyResourceInstance represents a resource instance that is to be destroyed.

func (*NodeDestroyResourceInstance) CreateBeforeDestroy 

func (n *NodeDestroyResourceInstance) CreateBeforeDestroy() bool

GraphNodeDestroyerCBD

func (*NodeDestroyResourceInstance) DestroyAddr 

func (n *NodeDestroyResourceInstance) DestroyAddr() *addrs.AbsResourceInstance

GraphNodeDestroyer

func (*NodeDestroyResourceInstance) Execute 

func (n *NodeDestroyResourceInstance) Execute(ctx EvalContext, op walkOperation) (diags tfdiags.Diagnostics)

GraphNodeExecutable

func (*NodeDestroyResourceInstance) ModifyCreateBeforeDestroy 

func (n *NodeDestroyResourceInstance) ModifyCreateBeforeDestroy(v bool) error

GraphNodeDestroyerCBD

func (*NodeDestroyResourceInstance) Name 

func (n *NodeDestroyResourceInstance) Name() string

func (*NodeDestroyResourceInstance) ProvidedBy 

func (n *NodeDestroyResourceInstance) ProvidedBy() (addr addrs.ProviderConfig, exact bool)

func (*NodeDestroyResourceInstance) ReferenceableAddrs 

func (n *NodeDestroyResourceInstance) ReferenceableAddrs() []addrs.Referenceable

GraphNodeReferenceable, overriding NodeAbstractResource

func (*NodeDestroyResourceInstance) References 

func (n *NodeDestroyResourceInstance) References() []*addrs.Reference

GraphNodeReferencer, overriding NodeAbstractResource

type NodeDestroyableDataResourceInstance 

type NodeDestroyableDataResourceInstance struct {
	*NodeAbstractResourceInstance
}

NodeDestroyableDataResourceInstance represents a resource that is "destroyable": it is ready to be destroyed.

func (*NodeDestroyableDataResourceInstance) Execute 

func (n *NodeDestroyableDataResourceInstance) Execute(ctx EvalContext, op walkOperation) tfdiags.Diagnostics

GraphNodeExecutable

type NodeDestroyableOutput 

type NodeDestroyableOutput struct {
	Addr     addrs.AbsOutputValue
	Planning bool
}

NodeDestroyableOutput represents an output that is "destroyable": its application will remove the output from the state.

func (*NodeDestroyableOutput) DotNode 

func (n *NodeDestroyableOutput) DotNode(name string, opts *dag.DotOpts) *dag.DotNode

dag.GraphNodeDotter impl.

func (*NodeDestroyableOutput) Execute 

func (n *NodeDestroyableOutput) Execute(ctx EvalContext, op walkOperation) tfdiags.Diagnostics

GraphNodeExecutable

func (*NodeDestroyableOutput) ModulePath 

func (n *NodeDestroyableOutput) ModulePath() addrs.Module

GraphNodeModulePath

func (*NodeDestroyableOutput) Name 

func (n *NodeDestroyableOutput) Name() string

type NodeEvalableProvider 

type NodeEvalableProvider struct {
	*NodeAbstractProvider
}

NodeEvalableProvider represents a provider during an "eval" walk. This special provider node type just initializes a provider and fetches its schema, without configuring it or otherwise interacting with it.

func (*NodeEvalableProvider) Execute 

func (n *NodeEvalableProvider) Execute(ctx EvalContext, op walkOperation) (diags tfdiags.Diagnostics)

GraphNodeExecutable

type NodeForgetDeposedResourceInstanceObject 

type NodeForgetDeposedResourceInstanceObject struct {
	*NodeAbstractResourceInstance
	DeposedKey states.DeposedKey
}

NodeForgetDeposedResourceInstanceObject represents deposed resource instance objects during apply. Nodes of this type are inserted by DiffTransformer when the planned changeset contains "forget" changes for deposed instance objects, and its only supported operation is to forget the associated object from the state.

func (*NodeForgetDeposedResourceInstanceObject) DeposedInstanceObjectKey 

func (n *NodeForgetDeposedResourceInstanceObject) DeposedInstanceObjectKey() states.DeposedKey

func (*NodeForgetDeposedResourceInstanceObject) Execute 

func (n *NodeForgetDeposedResourceInstanceObject) Execute(ctx EvalContext, op walkOperation) (diags tfdiags.Diagnostics)

GraphNodeExecutable impl.

func (*NodeForgetDeposedResourceInstanceObject) Name 

func (n *NodeForgetDeposedResourceInstanceObject) Name() string

func (*NodeForgetDeposedResourceInstanceObject) ReferenceableAddrs 

func (n *NodeForgetDeposedResourceInstanceObject) ReferenceableAddrs() []addrs.Referenceable

GraphNodeReferenceable implementation, overriding the one from NodeAbstractResourceInstance

func (*NodeForgetDeposedResourceInstanceObject) References 

func (n *NodeForgetDeposedResourceInstanceObject) References() []*addrs.Reference

GraphNodeReferencer implementation, overriding the one from NodeAbstractResourceInstance

type NodeForgetResourceInstance 

type NodeForgetResourceInstance struct {
	*NodeAbstractResourceInstance

	// If DeposedKey is set to anything other than states.NotDeposed then
	// this node forgets a deposed object of the associated instance
	// rather than its current object.
	DeposedKey states.DeposedKey
}

NodeForgetResourceInstance represents a resource instance that is to be forgotten from the state.

func (*NodeForgetResourceInstance) Execute 

func (n *NodeForgetResourceInstance) Execute(ctx EvalContext, op walkOperation) (diags tfdiags.Diagnostics)

GraphNodeExecutable

func (*NodeForgetResourceInstance) Name 

func (n *NodeForgetResourceInstance) Name() string

type NodeLocal 

type NodeLocal struct {
	Addr   addrs.AbsLocalValue
	Config *configs.Local
}

NodeLocal represents a named local value in a particular module.

Local value nodes only have one operation, common to all walk types: evaluate the result and place it in state.

func (*NodeLocal) DotNode 

func (n *NodeLocal) DotNode(name string, opts *dag.DotOpts) *dag.DotNode

dag.GraphNodeDotter impl.

func (*NodeLocal) Execute 

func (n *NodeLocal) Execute(ctx EvalContext, op walkOperation) (diags tfdiags.Diagnostics)

GraphNodeExecutable NodeLocal.Execute is an Execute implementation that evaluates the expression for a local value and writes it into a transient part of the state.

func (*NodeLocal) ModulePath 

func (n *NodeLocal) ModulePath() addrs.Module

GraphNodeModulePath

func (*NodeLocal) Name 

func (n *NodeLocal) Name() string

func (*NodeLocal) Path 

func (n *NodeLocal) Path() addrs.ModuleInstance

GraphNodeModuleInstance

func (*NodeLocal) ReferenceableAddrs 

func (n *NodeLocal) ReferenceableAddrs() []addrs.Referenceable

GraphNodeReferenceable

func (*NodeLocal) References 

func (n *NodeLocal) References() []*addrs.Reference

GraphNodeReferencer

type NodePlanDeposedResourceInstanceObject 

type NodePlanDeposedResourceInstanceObject struct {
	*NodeAbstractResourceInstance
	DeposedKey states.DeposedKey

	// EndpointsToRemove are resource instance addresses where the user wants to
	// forget from the state. This set isn't pre-filtered, so
	// it might contain addresses that have nothing to do with the resource
	// that this node represents, which the node itself must therefore ignore.
	EndpointsToRemove []addrs.ConfigRemovable
	// contains filtered or unexported fields
}

NodePlanDeposedResourceInstanceObject represents deposed resource instance objects during plan. These are distinct from the primary object for each resource instance since the only valid operation to do with them is to destroy them.

This node type is also used during the refresh walk to ensure that the record of a deposed object is up-to-date before we plan to destroy it.

func (*NodePlanDeposedResourceInstanceObject) DeposedInstanceObjectKey 

func (n *NodePlanDeposedResourceInstanceObject) DeposedInstanceObjectKey() states.DeposedKey

func (*NodePlanDeposedResourceInstanceObject) Execute 

func (n *NodePlanDeposedResourceInstanceObject) Execute(ctx EvalContext, op walkOperation) (diags tfdiags.Diagnostics)

GraphNodeEvalable impl.

func (*NodePlanDeposedResourceInstanceObject) Name 

func (n *NodePlanDeposedResourceInstanceObject) Name() string

func (*NodePlanDeposedResourceInstanceObject) ReferenceableAddrs 

func (n *NodePlanDeposedResourceInstanceObject) ReferenceableAddrs() []addrs.Referenceable

GraphNodeReferenceable implementation, overriding the one from NodeAbstractResourceInstance

func (*NodePlanDeposedResourceInstanceObject) References 

func (n *NodePlanDeposedResourceInstanceObject) References() []*addrs.Reference

GraphNodeReferencer implementation, overriding the one from NodeAbstractResourceInstance

type NodePlanDestroyableResourceInstance 

type NodePlanDestroyableResourceInstance struct {
	*NodeAbstractResourceInstance
	// contains filtered or unexported fields
}

NodePlanDestroyableResourceInstance represents a resource that is ready to be planned for destruction.

func (*NodePlanDestroyableResourceInstance) DestroyAddr 

func (n *NodePlanDestroyableResourceInstance) DestroyAddr() *addrs.AbsResourceInstance

GraphNodeDestroyer

func (*NodePlanDestroyableResourceInstance) Execute 

func (n *NodePlanDestroyableResourceInstance) Execute(ctx EvalContext, op walkOperation) (diags tfdiags.Diagnostics)

GraphNodeEvalable

type NodePlannableResourceInstance 

type NodePlannableResourceInstance struct {
	*NodeAbstractResourceInstance
	ForceCreateBeforeDestroy bool
	// contains filtered or unexported fields
}

NodePlannableResourceInstance represents a _single_ resource instance that is plannable. This means this represents a single count index, for example.

func (*NodePlannableResourceInstance) Execute 

func (n *NodePlannableResourceInstance) Execute(ctx EvalContext, op walkOperation) tfdiags.Diagnostics

GraphNodeEvalable

type NodePlannableResourceInstanceOrphan 

type NodePlannableResourceInstanceOrphan struct {
	*NodeAbstractResourceInstance

	// EndpointsToRemove are resource instance addresses where the user wants to
	// forget from the state. This set isn't pre-filtered, so
	// it might contain addresses that have nothing to do with the resource
	// that this node represents, which the node itself must therefore ignore.
	EndpointsToRemove []addrs.ConfigRemovable
	// contains filtered or unexported fields
}

NodePlannableResourceInstanceOrphan represents a resource that is "applyable": it is ready to be applied and is represented by a diff.

func (*NodePlannableResourceInstanceOrphan) Execute 

func (n *NodePlannableResourceInstanceOrphan) Execute(ctx EvalContext, op walkOperation) tfdiags.Diagnostics

GraphNodeExecutable

func (*NodePlannableResourceInstanceOrphan) Name 

func (n *NodePlannableResourceInstanceOrphan) Name() string

func (*NodePlannableResourceInstanceOrphan) ProvidedBy 

func (n *NodePlannableResourceInstanceOrphan) ProvidedBy() (addr addrs.ProviderConfig, exact bool)

type NodeRootVariable 

type NodeRootVariable struct {
	Addr   addrs.InputVariable
	Config *configs.Variable

	// RawValue is the value for the variable set from outside OpenTofu
	// Core, such as on the command line, or from an environment variable,
	// or similar. This is the raw value that was provided, not yet
	// converted or validated, and can be nil for a variable that isn't
	// set at all.
	RawValue *InputValue
}

NodeRootVariable represents a root variable input.

func (*NodeRootVariable) DotNode 

func (n *NodeRootVariable) DotNode(name string, opts *dag.DotOpts) *dag.DotNode

dag.GraphNodeDotter impl.

func (*NodeRootVariable) Execute 

func (n *NodeRootVariable) Execute(ctx EvalContext, op walkOperation) tfdiags.Diagnostics

GraphNodeExecutable

func (*NodeRootVariable) ModulePath 

func (n *NodeRootVariable) ModulePath() addrs.Module

func (*NodeRootVariable) Name 

func (n *NodeRootVariable) Name() string

func (*NodeRootVariable) Path 

func (n *NodeRootVariable) Path() addrs.ModuleInstance

GraphNodeModuleInstance

func (*NodeRootVariable) ReferenceableAddrs 

func (n *NodeRootVariable) ReferenceableAddrs() []addrs.Referenceable

GraphNodeReferenceable

func (*NodeRootVariable) References 

func (n *NodeRootVariable) References() []*addrs.Reference

GraphNodeReferencer

type NodeValidatableResource 

type NodeValidatableResource struct {
	*NodeAbstractResource
}

NodeValidatableResource represents a resource that is used for validation only.

func (*NodeValidatableResource) Execute 

func (n *NodeValidatableResource) Execute(ctx EvalContext, op walkOperation) (diags tfdiags.Diagnostics)

GraphNodeEvalable

func (*NodeValidatableResource) Path 

func (n *NodeValidatableResource) Path() addrs.ModuleInstance

type NullGraphWalker 

type NullGraphWalker struct{}

NullGraphWalker is a GraphWalker implementation that does nothing. This can be embedded within other GraphWalker implementations for easily implementing all the required functions.

func (NullGraphWalker) EnterPath 

func (NullGraphWalker) EnterPath(addrs.ModuleInstance) EvalContext

func (NullGraphWalker) EvalContext 

func (NullGraphWalker) EvalContext() EvalContext

func (NullGraphWalker) Execute 

func (NullGraphWalker) Execute(EvalContext, GraphNodeExecutable) tfdiags.Diagnostics

func (NullGraphWalker) ExitPath 

func (NullGraphWalker) ExitPath(addrs.ModuleInstance)

type OrphanOutputTransformer 

type OrphanOutputTransformer struct {
	Config   *configs.Config // Root of config tree
	State    *states.State   // State is the root state
	Planning bool
}

OrphanOutputTransformer finds the outputs that aren't present in the given config that are in the state and adds them to the graph for deletion.

func (*OrphanOutputTransformer) Transform 

func (t *OrphanOutputTransformer) Transform(g *Graph) error

type OrphanResourceInstanceCountTransformer 

type OrphanResourceInstanceCountTransformer struct {
	Concrete ConcreteResourceInstanceNodeFunc

	Addr          addrs.AbsResource           // Addr of the resource to look for orphans
	InstanceAddrs []addrs.AbsResourceInstance // Addresses that currently exist in config
	State         *states.State               // Full global state
}

OrphanResourceInstanceCountTransformer is a GraphTransformer that adds orphans for an expanded count to the graph. The determination of this depends on the count argument given.

Orphans are found by comparing the count to what is found in the state. This transform assumes that if an element in the state is within the count bounds given, that it is not an orphan.

func (*OrphanResourceInstanceCountTransformer) Transform 

func (t *OrphanResourceInstanceCountTransformer) Transform(g *Graph) error

type OrphanResourceInstanceTransformer 

type OrphanResourceInstanceTransformer struct {
	Concrete ConcreteResourceInstanceNodeFunc

	// State is the global state. We require the global state to
	// properly find module orphans at our path.
	State *states.State

	// Config is the root node in the configuration tree. We'll look up
	// the appropriate note in this tree using the path in each node.
	Config *configs.Config
	// contains filtered or unexported fields
}

OrphanResourceInstanceTransformer is a GraphTransformer that adds orphaned resource instances to the graph. An "orphan" is an instance that is present in the state but belongs to a resource that is no longer present in the configuration.

This is not the transformer that deals with "count orphans" (instances that are no longer covered by a resource's "count" or "for_each" setting); that's handled instead by OrphanResourceCountTransformer.

func (*OrphanResourceInstanceTransformer) Transform 

func (t *OrphanResourceInstanceTransformer) Transform(g *Graph) error

type OutputTransformer 

type OutputTransformer struct {
	Config *configs.Config

	// Refresh-only mode means that any failing output preconditions are
	// reported as warnings rather than errors
	RefreshOnly bool

	// Planning must be set to true only when we're building a planning graph.
	// It must be set to false whenever we're building an apply graph.
	Planning bool

	// If this is a planned destroy, root outputs are still in the configuration
	// so we need to record that we wish to remove them.
	Destroying bool
}

OutputTransformer is a GraphTransformer that adds all the outputs in the configuration to the graph.

This is done for the apply graph builder even if dependent nodes aren't changing since there is no downside: the state will be available even if the dependent items aren't changing.

func (*OutputTransformer) Transform 

func (t *OutputTransformer) Transform(g *Graph) error

type PlanGraphBuilder 

type PlanGraphBuilder struct {
	// Config is the configuration tree to build a plan from.
	Config *configs.Config

	// State is the current state
	State *states.State

	// RootVariableValues are the raw input values for root input variables
	// given by the caller, which we'll resolve into final values as part
	// of the plan walk.
	RootVariableValues InputValues

	// Plugins is a library of plug-in components (providers and
	// provisioners) available for use.
	Plugins *contextPlugins

	// Targets are resources to target
	Targets []addrs.Targetable

	// ForceReplace are resource instances where if we would normally have
	// generated a NoOp or Update action then we'll force generating a replace
	// action instead. Create and Delete actions are not affected.
	ForceReplace []addrs.AbsResourceInstance

	ConcreteProvider                ConcreteProviderNodeFunc
	ConcreteResource                ConcreteResourceNodeFunc
	ConcreteResourceInstance        ConcreteResourceInstanceNodeFunc
	ConcreteResourceOrphan          ConcreteResourceInstanceNodeFunc
	ConcreteResourceInstanceDeposed ConcreteResourceInstanceDeposedNodeFunc
	ConcreteModule                  ConcreteModuleNodeFunc

	// Plan Operation this graph will be used for.
	Operation walkOperation

	// ExternalReferences allows the external caller to pass in references to
	// nodes that should not be pruned even if they are not referenced within
	// the actual graph.
	ExternalReferences []*addrs.Reference

	// ImportTargets are the list of resources to import.
	ImportTargets []*ImportTarget

	// EndpointsToRemove are the list of resources and modules to forget from
	// the state.
	EndpointsToRemove []addrs.ConfigRemovable

	// GenerateConfig tells OpenTofu where to write and generated config for
	// any import targets that do not already have configuration.
	//
	// If empty, then config will not be generated.
	GenerateConfigPath string
	// contains filtered or unexported fields
}

PlanGraphBuilder is a GraphBuilder implementation that builds a graph for planning and for other "plan-like" operations which don't require an already-calculated plan as input.

Unlike the apply graph builder, this graph builder:

  • Makes its decisions primarily based on the given configuration, which represents the desired state.

  • Ignores certain lifecycle concerns like create_before_destroy, because those are only important once we already know what action we're planning to take against a particular resource instance.

func (*PlanGraphBuilder) Build 

func (b *PlanGraphBuilder) Build(path addrs.ModuleInstance) (*Graph, tfdiags.Diagnostics)

See GraphBuilder

func (*PlanGraphBuilder) Steps 

func (b *PlanGraphBuilder) Steps() []GraphTransformer

See GraphBuilder

type PlanOpts 

type PlanOpts struct {
	// Mode defines what variety of plan the caller wishes to create.
	// Refer to the documentation of the plans.Mode type and its values
	// for more information.
	Mode plans.Mode

	// SkipRefresh specifies to trust that the current values for managed
	// resource instances in the prior state are accurate and to therefore
	// disable the usual step of fetching updated values for each resource
	// instance using its corresponding provider.
	SkipRefresh bool

	// PreDestroyRefresh indicated that this is being passed to a plan used to
	// refresh the state immediately before a destroy plan.
	// FIXME: This is a temporary fix to allow the pre-destroy refresh to
	// succeed. The refreshing operation during destroy must be a special case,
	// which can allow for missing instances in the state, and avoid blocking
	// on failing condition tests. The destroy plan itself should be
	// responsible for this special case of refreshing, and the separate
	// pre-destroy plan removed entirely.
	PreDestroyRefresh bool

	// SetVariables are the raw values for root module variables as provided
	// by the user who is requesting the run, prior to any normalization or
	// substitution of defaults. See the documentation for the InputValue
	// type for more information on how to correctly populate this.
	SetVariables InputValues

	// If Targets has a non-zero length then it activates targeted planning
	// mode, where OpenTofu will take actions only for resource instances
	// mentioned in this set and any other objects those resource instances
	// depend on.
	//
	// Targeted planning mode is intended for exceptional use only,
	// and so populating this field will cause OpenTofu to generate extra
	// warnings as part of the planning result.
	Targets []addrs.Targetable

	// ForceReplace is a set of resource instance addresses whose corresponding
	// objects should be forced planned for replacement if the provider's
	// plan would otherwise have been to either update the object in-place or
	// to take no action on it at all.
	//
	// A typical use of this argument is to ask OpenTofu to replace an object
	// which the user has determined is somehow degraded (via information from
	// outside of OpenTofu), thereby hopefully replacing it with a
	// fully-functional new object.
	ForceReplace []addrs.AbsResourceInstance

	// ExternalReferences allows the external caller to pass in references to
	// nodes that should not be pruned even if they are not referenced within
	// the actual graph.
	ExternalReferences []*addrs.Reference

	// ImportTargets is a list of target resources to import. These resources
	// will be added to the plan graph.
	ImportTargets []*ImportTarget

	// EndpointsToRemove are the list of resources and modules to forget from
	// the state.
	EndpointsToRemove []addrs.ConfigRemovable

	// GenerateConfig tells OpenTofu where to write any generated configuration
	// for any ImportTargets that do not have configuration already.
	//
	// If empty, then no config will be generated.
	GenerateConfigPath string
}

PlanOpts are the various options that affect the details of how OpenTofu will build a plan.

func SimplePlanOpts 

func SimplePlanOpts(mode plans.Mode, setVariables InputValues) *PlanOpts

SimplePlanOpts is a constructor to help with creating "simple" values of PlanOpts which only specify a mode and input variables.

This helper function is primarily intended for use in straightforward tests that don't need any of the more "esoteric" planning options. For handling real user requests to run OpenTofu, it'd probably be better to construct a *PlanOpts value directly and provide a way for the user to set values for all of its fields.

The "mode" and "setVariables" arguments become the values of the "Mode" and "SetVariables" fields in the result. Refer to the PlanOpts type documentation to learn about the meanings of those fields.

type PrefixUIInput 

type PrefixUIInput struct {
	IdPrefix    string
	QueryPrefix string
	UIInput     UIInput
}

PrefixUIInput is an implementation of UIInput that prefixes the ID with a string, allowing queries to be namespaced.

func (*PrefixUIInput) Input 

func (i *PrefixUIInput) Input(ctx context.Context, opts *InputOpts) (string, error)

type ProviderConfigTransformer 

type ProviderConfigTransformer struct {
	Concrete ConcreteProviderNodeFunc

	// Config is the root node of the configuration tree to add providers from.
	Config *configs.Config
	// contains filtered or unexported fields
}

ProviderConfigTransformer adds all provider nodes from the configuration and attaches the configs.

func (*ProviderConfigTransformer) Transform 

func (t *ProviderConfigTransformer) Transform(g *Graph) error

type ProviderFunctionTransformer 

type ProviderFunctionTransformer struct {
	Config *configs.Config
}

ProviderFunctionTransformer is a GraphTransformer that maps nodes which reference functions to providers within the graph. This will error if there are any provider functions that don't map to known providers.

func (*ProviderFunctionTransformer) Transform 

func (t *ProviderFunctionTransformer) Transform(g *Graph) error

type ProviderTransformer 

type ProviderTransformer struct {
	Config *configs.Config
}

ProviderTransformer is a GraphTransformer that maps resources to providers within the graph. This will error if there are any resources that don't map to proper resources.

func (*ProviderTransformer) Transform 

func (t *ProviderTransformer) Transform(g *Graph) error

type ProviderWithEncryption 

type ProviderWithEncryption interface {
	ReadDataSourceEncrypted(req providers.ReadDataSourceRequest, path addrs.AbsResourceInstance, enc encryption.Encryption) providers.ReadDataSourceResponse
}

type ProvisionerUIOutput 

type ProvisionerUIOutput struct {
	InstanceAddr    addrs.AbsResourceInstance
	ProvisionerType string
	Hooks           []Hook
}

ProvisionerUIOutput is an implementation of UIOutput that calls a hook for the output so that the hooks can handle it.

func (*ProvisionerUIOutput) Output 

func (o *ProvisionerUIOutput) Output(msg string)

type PruneProviderTransformer 

type PruneProviderTransformer struct{}

PruneProviderTransformer removes any providers that are not actually used by anything, and provider proxies. This avoids the provider being initialized and configured. This both saves resources but also avoids errors since configuration may imply initialization which may require auth.

func (*PruneProviderTransformer) Transform 

func (t *PruneProviderTransformer) Transform(g *Graph) error

type ReferenceMap 

type ReferenceMap map[string][]dag.Vertex

ReferenceMap is a structure that can be used to efficiently check for references on a graph, mapping internal reference keys (as produced by the mapKey method) to one or more vertices that are identified by each key.

func NewReferenceMap 

func NewReferenceMap(vs []dag.Vertex) ReferenceMap

NewReferenceMap is used to create a new reference map for the given set of vertices.

func (ReferenceMap) References 

func (m ReferenceMap) References(v dag.Vertex) []dag.Vertex

References returns the set of vertices that the given vertex refers to, and any referenced addresses that do not have corresponding vertices.

type ReferenceTransformer 

type ReferenceTransformer struct{}

ReferenceTransformer is a GraphTransformer that connects all the nodes that reference each other in order to form the proper ordering.

func (*ReferenceTransformer) Transform 

func (t *ReferenceTransformer) Transform(g *Graph) error

type RemovedModuleTransformer 

type RemovedModuleTransformer struct {
	Config *configs.Config // root node in the config tree
	State  *states.State
}

RemovedModuleTransformer implements GraphTransformer to add nodes indicating when a module was removed from the configuration.

func (*RemovedModuleTransformer) Transform 

func (t *RemovedModuleTransformer) Transform(g *Graph) error

type ResourceCountTransformer 

type ResourceCountTransformer struct {
	Concrete ConcreteResourceInstanceNodeFunc
	Schema   *configschema.Block

	Addr          addrs.ConfigResource
	InstanceAddrs []addrs.AbsResourceInstance
}

ResourceCountTransformer is a GraphTransformer that expands the count out for a specific resource.

This assumes that the count is already interpolated.

func (*ResourceCountTransformer) Transform 

func (t *ResourceCountTransformer) Transform(g *Graph) error

type RootTransformer 

type RootTransformer struct{}

RootTransformer is a GraphTransformer that adds a root to the graph.

func (*RootTransformer) Transform 

func (t *RootTransformer) Transform(g *Graph) error

type RootVariableTransformer 

type RootVariableTransformer struct {
	Config *configs.Config

	RawValues InputValues
}

RootVariableTransformer is a GraphTransformer that adds all the root variables to the graph.

Root variables are currently no-ops but they must be added to the graph since downstream things that depend on them must be able to reach them.

func (*RootVariableTransformer) Transform 

func (t *RootVariableTransformer) Transform(g *Graph) error

type Schemas 

type Schemas struct {
	Providers    map[addrs.Provider]providers.ProviderSchema
	Provisioners map[string]*configschema.Block
}

Schemas is a container for various kinds of schema that OpenTofu needs during processing.

func (*Schemas) ProviderConfig 

func (ss *Schemas) ProviderConfig(provider addrs.Provider) *configschema.Block

ProviderConfig returns the schema for the provider configuration of the given provider type, or nil if no such schema is available.

func (*Schemas) ProviderSchema 

func (ss *Schemas) ProviderSchema(provider addrs.Provider) providers.ProviderSchema

ProviderSchema returns the entire ProviderSchema object that was produced by the plugin for the given provider, or nil if no such schema is available.

It's usually better to go use the more precise methods offered by type Schemas to handle this detail automatically.

func (*Schemas) ProvisionerConfig 

func (ss *Schemas) ProvisionerConfig(name string) *configschema.Block

ProvisionerConfig returns the schema for the configuration of a given provisioner, or nil of no such schema is available.

func (*Schemas) ResourceTypeConfig 

func (ss *Schemas) ResourceTypeConfig(provider addrs.Provider, resourceMode addrs.ResourceMode, resourceType string) (block *configschema.Block, schemaVersion uint64)

ResourceTypeConfig returns the schema for the configuration of a given resource type belonging to a given provider type, or nil of no such schema is available.

In many cases the provider type is inferrable from the resource type name, but this is not always true because users can override the provider for a resource using the "provider" meta-argument. Therefore it's important to always pass the correct provider name, even though it many cases it feels redundant.

type Semaphore 

type Semaphore chan struct{}

Semaphore is a wrapper around a channel to provide utility methods to clarify that we are treating the channel as a semaphore

func NewSemaphore 

func NewSemaphore(n int) Semaphore

NewSemaphore creates a semaphore that allows up to a given limit of simultaneous acquisitions

func (Semaphore) Acquire 

func (s Semaphore) Acquire()

Acquire is used to acquire an available slot. Blocks until available.

func (Semaphore) Release 

func (s Semaphore) Release()

Release is used to return a slot. Acquire must be called as a pre-condition.

func (Semaphore) TryAcquire 

func (s Semaphore) TryAcquire() bool

TryAcquire is used to do a non-blocking acquire. Returns a bool indicating success

type StateTransformer 

type StateTransformer struct {
	// ConcreteCurrent and ConcreteDeposed are used to specialize the abstract
	// resource instance nodes that this transformer will create.
	//
	// If either of these is nil, the objects of that type will be skipped and
	// not added to the graph at all. It doesn't make sense to use this
	// transformer without setting at least one of these, since that would
	// skip everything and thus be a no-op.
	ConcreteCurrent ConcreteResourceInstanceNodeFunc
	ConcreteDeposed ConcreteResourceInstanceDeposedNodeFunc

	State *states.State
}

StateTransformer is a GraphTransformer that adds the elements of the state to the graph.

This transform is used for example by the DestroyPlanGraphBuilder to ensure that only resources that are in the state are represented in the graph.

func (*StateTransformer) Transform 

func (t *StateTransformer) Transform(g *Graph) error

type TargetsTransformer 

type TargetsTransformer struct {
	// List of targeted resource names specified by the user
	Targets []addrs.Targetable
}

TargetsTransformer is a GraphTransformer that, when the user specifies a list of resources to target, limits the graph to only those resources and their dependencies.

func (*TargetsTransformer) Transform 

func (t *TargetsTransformer) Transform(g *Graph) error

type TestContext 

type TestContext struct {
	*Context

	Config    *configs.Config
	State     *states.State
	Plan      *plans.Plan
	Variables InputValues
}

TestContext wraps a Context, and adds in direct values for the current state, most recent plan, and configuration.

This combination allows functions called on the TestContext to create a complete scope to evaluate test assertions.

func (*TestContext) EvaluateAgainstPlan 

func (ctx *TestContext) EvaluateAgainstPlan(run *moduletest.Run)

EvaluateAgainstPlan processes the assertions inside the provided configs.TestRun against the embedded plan and state.

func (*TestContext) EvaluateAgainstState 

func (ctx *TestContext) EvaluateAgainstState(run *moduletest.Run)

EvaluateAgainstState processes the assertions inside the provided configs.TestRun against the embedded state.

The provided plan is import as it is needed to evaluate the `plantimestamp` function, but no data or changes from the embedded plan is referenced in this function.

type TransitiveReductionTransformer 

type TransitiveReductionTransformer struct{}

TransitiveReductionTransformer is a GraphTransformer that finds the transitive reduction of the graph. For a definition of transitive reduction, see [Wikipedia](https://en.wikipedia.org/wiki/Transitive_reduction).

func (*TransitiveReductionTransformer) Transform 

func (t *TransitiveReductionTransformer) Transform(g *Graph) error

type UIInput 

type UIInput interface {
	Input(context.Context, *InputOpts) (string, error)
}

UIInput is the interface that must be implemented to ask for input from this user. This should forward the request to wherever the user inputs things to ask for values.

type UIOutput 

type UIOutput interface {
	Output(string)
}

UIOutput is the interface that must be implemented to output data to the end user.

type ValueSourceType 

type ValueSourceType rune

ValueSourceType describes what broad category of source location provided a particular value. 

const (
	// ValueFromUnknown is the zero value of ValueSourceType and is not valid.
	ValueFromUnknown ValueSourceType = 0

	// ValueFromConfig indicates that a value came from a .tf or .tf.json file,
	// e.g. the default value defined for a variable.
	ValueFromConfig ValueSourceType = 'C'

	// ValueFromAutoFile indicates that a value came from a "values file", like
	// a .tfvars file, that was implicitly loaded by naming convention.
	ValueFromAutoFile ValueSourceType = 'F'

	// ValueFromNamedFile indicates that a value came from a named "values file",
	// like a .tfvars file, that was passed explicitly on the command line (e.g.
	// -var-file=foo.tfvars).
	ValueFromNamedFile ValueSourceType = 'N'

	// ValueFromCLIArg indicates that the value was provided directly in
	// a CLI argument. The name of this argument is not recorded and so it must
	// be inferred from context.
	ValueFromCLIArg ValueSourceType = 'A'

	// ValueFromEnvVar indicates that the value was provided via an environment
	// variable. The name of the variable is not recorded and so it must be
	// inferred from context.
	ValueFromEnvVar ValueSourceType = 'E'

	// ValueFromInput indicates that the value was provided at an interactive
	// input prompt.
	ValueFromInput ValueSourceType = 'I'

	// ValueFromPlan indicates that the value was retrieved from a stored plan.
	ValueFromPlan ValueSourceType = 'P'

	// ValueFromCaller indicates that the value was explicitly overridden by
	// a caller to Context.SetVariable after the context was constructed.
	ValueFromCaller ValueSourceType = 'S'
)

func (ValueSourceType) GoString 

func (v ValueSourceType) GoString() string

func (ValueSourceType) HasSourceRange 

func (v ValueSourceType) HasSourceRange() bool

HasSourceRange returns true if the reciever is one of the source types that is used along with a valid SourceRange field when appearing inside an InputValue object.

func (ValueSourceType) String 

func (i ValueSourceType) String() string

type VertexTransformer 

type VertexTransformer struct {
	Transforms []GraphVertexTransformer
}

VertexTransformer is a GraphTransformer that transforms vertices using the GraphVertexTransformers. The Transforms are run in sequential order. If a transform replaces a vertex then the next transform will see the new vertex.

func (*VertexTransformer) Transform 

func (t *VertexTransformer) Transform(g *Graph) error

Notes

Bugs

  • we're not validating provider_meta blocks on EvalValidate right now because the ProviderAddr for the resource isn't available on the EvalValidate struct.

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.