terragrunt

README

WARNING: THIS REPO IS AN AUTO-GENERATED COPY. This repo has been copied from Gruntwork’s GitHub repositories so that you can consume it from your company’s own internal Git repositories. This copy is automatically created and updated by the repo-copier CLI tool. If you need to make changes to this repo, you should make the changes in a separate fork, and NOT make changes directly in this repo, as otherwise, the repo-copier will overwrite your changes! Please see the repo-copier documentation for more information on how the code is copied, how cross-references are updated, how the changelog is handled, etc.

---

You may find it valuable to view the following resources in the original repo. If these links give you a 404, visit https://app.gruntwork.io to gain access or email support@gruntwork.io if you need assistance.

Home Page | Pull Requests | Issues | Releases and Assets

Alternatively, you can view a copied version of the resources listed above.

Pull Requests | Issues | ChangeLog

---

Terragrunt

Terragrunt is a thin wrapper for Terraform that supports locking and enforces best practices for Terraform state:

1. Locking: Terragrunt can use Amazon's DynamoDB as a distributed locking mechanism to ensure that two team members working on the same Terraform state files do not overwrite each other's changes. DynamoDB is part of the AWS free tier, so using it as a locking mechanism should not cost you anything.
2. Remote state management: A common mistake when using Terraform is to forget to configure remote state or to configure it incorrectly. Terragrunt can prevent these sorts of errors by automatically configuring remote state for everyone on your team.

Other types of locking mechanisms and automation for more best practices may be added in the future.

Motivation

When you use Terraform to provision infrastructure, it records the state of your infrastructure in state files. In order to make changes to your infrastructure, everyone on your team needs access to these state files. You could check the files into version control (not a great idea, as the state files may contain secrets) or use a supported remote state backend to store the state files in a shared location such as S3, Consul, or etcd. All of these options have two problems:

1. They do not provide locking. If two team members run terraform apply on the same state files at the same time, they may overwrite each other's changes. The official solution to this problem is to use Hashicorp's Atlas, but that can be a fairly expensive option, and it requires you to use a SaaS platform for all Terraform operations.
2. They are error prone. Very often, you do a fresh checkout of a bunch of Terraform templates from version control, forget to enable remote state storage before applying them, and end up creating a bunch of duplicate resources. Sometimes you do remember to enable remote state storage, but you use the wrong configuration (e.g. the wrong S3 bucket name or key) and you end up overwriting the state for a totally different set of templates.

The goal of Terragrunt is to take Terraform, which is a fantastic tool, and make it even better for teams by providing a simple, free locking mechanism, and enforcing best practices around CLI usage. Check out Add Automatic Remote State Locking and Configuration to Terraform with Terragrunt for more info.

Install

1. Install Terraform and make sure it is in your PATH.
2. Install Terragrunt by going to the Releases Page, downloading the binary for your OS, renaming it to terragrunt, and adding it to your PATH.

Quick start

Go into the folder with your Terraform templates and create a .terragrunt file. This file uses the same HCL syntax as Terraform. Here is an example .terragrunt file that configures Terragrunt to use DynamoDB for locking and to automatically manage remote state for you using the S3 backend:

# Configure Terragrunt to use DynamoDB for locking
lock = {
  backend = "dynamodb"
  config {
    state_file_id = "my-app"
  }
}

# Configure Terragrunt to automatically store tfstate files in an S3 bucket
remote_state = {
  backend = "s3"
  config {
    encrypt = "true"
    bucket = "my-bucket"
    key = "terraform.tfstate"
    region = "us-east-1"
  }
}

Once you check this .terragrunt file into source control, everyone on your team can use Terragrunt to run all the standard Terraform commands:

terragrunt get
terragrunt plan
terragrunt apply
terragrunt output
terragrunt destroy

Terragrunt forwards almost all commands, arguments, and options directly to Terraform, using whatever version of Terraform you already have installed. However, before running Terraform, Terragrunt will ensure your remote state is configured according to the settings in the .terragrunt file. Moreover, for the apply, refresh, and destroy commands, Terragrunt will first try to acquire a lock using DynamoDB:

terragrunt apply
[terragrunt] 2016/05/30 16:55:28 Configuring remote state for the s3 backend
[terragrunt] 2016/05/30 16:55:28 Running command: terraform remote config -backend s3 -backend-config=key=terraform.tfstate -backend-config=region=us-east-1 -backend-config=encrypt=true -backend-config=bucket=my-bucket
Initialized blank state with remote state enabled!
[terragrunt] 2016/05/30 16:55:29 Attempting to acquire lock for state file my-app in DynamoDB
[terragrunt] 2016/05/30 16:55:30 Attempting to create lock item for state file my-app in DynamoDB table terragrunt_locks
[terragrunt] 2016/05/30 16:55:30 Lock acquired!
[terragrunt] 2016/05/30 16:55:30 Running command: terraform apply
terraform apply

aws_instance.example: Creating...
  ami:                      "" => "ami-0d729a60"
  instance_type:            "" => "t2.micro"

[...]

Apply complete! Resources: 1 added, 0 changed, 0 destroyed.

[terragrunt] 2016/05/27 00:39:19 Attempting to release lock for state file my-app in DynamoDB
[terragrunt] 2016/05/27 00:39:19 Lock released!

Locking using DynamoDB

Terragrunt can use Amazon's DynamoDB to acquire and release locks. DynamoDB supports strongly consistent reads as well as conditional writes, which are all the primitives we need for a very basic distributed lock system. It's also part of AWS's free tier, and given the tiny amount of data we are working with and the relatively small number of times per day you're likely to run Terraform, it should be a free option for teams already using AWS. We take no responsibility for any charges you may incur.

DynamoDB locking prerequisites

To use DynamoDB for locking, you must:

1. Set your AWS credentials in the environment using one of the following options:

   1. Set your credentials as the environment variables AWS_ACCESS_KEY_ID and AWS_SECRET_ACCESS_KEY (and also AWS_SESSION_TOKEN if using STS temporary credentials)
   2. Run aws configure and fill in the details it asks for.
   3. Run Terragrunt on an EC2 instance with an IAM Role.

2. Your AWS user must have an IAM policy granting all DynamoDB actions (dynamodb:*) on the table terragrunt_locks (see the DynamoDB locking configuration for how to configure this table name).

   Here is an example IAM policy that grants the necessary permissions on the terragrunt_locks table in region us-west-2 for an account with account id 1234567890:

   {
     "Version": "2012-10-17",
     "Statement": [
         {
           "Sid": "ReadWriteToDynamoDB",
           "Effect": "Allow",
           "Action": "dynamodb:*",
           "Resource": "arn:aws:dynamodb:us-west-2:1234567890:table/terragrunt_locks"
         }
     ]
   }
   

DynamoDB locking configuration

For DynamoDB locking, Terragrunt supports the following settings in .terragrunt:

lock = {
  backend = "dynamodb"
  config {
    state_file_id = "my-app"
    aws_region = "us-east-1"
    table_name = "terragrunt_locks"
    max_lock_retries = 360
  }
}

• state_file_id: (Required) A unique id for the state file for these Terraform templates. Many teams have more than one set of templates, and therefore more than one state file, so this setting is used to disambiguate locks for one state file from another.
• aws_region: (Optional) The AWS region to use. Default: us-east-1.
• table_name: (Optional) The name of the table in DynamoDB to use to store lock information. Default: terragrunt_locks.
• max_lock_retries: (Optional) The maximum number of times to retry acquiring a lock. Terragrunt waits 10 seconds between retries. Default: 360 retries (one hour).

How DynamoDB locking works

When you run terragrunt apply or terragrunt destroy, Terragrunt does the following:

1. Create the terragrunt_locks table if it doesn't already exist.
2. Try to write an item to the terragrunt_locks table with state_file_id equal to the id specified in your .terragrunt file. This item will include useful metadata about the lock, such as who created it (e.g. your username) and when.
3. Note that the write is a conditional write that will fail if an item with the same state_file_id already exists.
   1. If the write succeeds, it means we have a lock!
   2. If the write does not succeed, it means someone else has a lock. Keep retrying every 10 seconds until we get a lock.
4. Run terraform apply or terraform destroy.
5. When Terraform is done, delete the item from the terragrunt_locks table to release the lock.

Acquiring a long-term lock

Occasionally, you may want to lock a set of Terraform files and not allow further changes, perhaps during maintenance work or as a precaution for templates that rarely change. To do that, you can use the acquire-lock command:

terragrunt acquire-lock
Are you sure you want to acquire a long-term lock? (y/n): y

See the next section for how to release this lock.

Manually releasing a lock

You can use the release-lock command to manually release a lock. This is useful if you used the acquire-lock command to create a long-term lock or if Terragrunt shut down before it released a lock (e.g. because of CTRL+C or a crash).

terragrunt release-lock
Are you sure you want to forcibly remove the lock for stateFileId "my-app"? (y/n): y

Managing remote state

Terragrunt can automatically manage remote state for you, preventing manual errors such as forgetting to enable remote state or using the wrong settings.

Remote state management prerequisites

Terragrunt works with all backends supported by Terraform. Check out the Terraform remote state docs for the requirements to use a particular remote state backend.

Remote state management configuration

For remote state management, Terragrunt supports the following settings in .terragrunt:

remote_state = {
  backend = "s3"
  config {
    key1 = "value1"
    key2 = "value2"
    key3 = "value3"
  }
}

• backend: (Required) The name of the remote state backend to use (e.g. s3, consul).
• config: (Optional) A map of additional key/value pairs to pass to the backend. Each backend requires different key/value pairs, so consult the Terraform remote state docs for details.

CLI Options

Terragrunt forwards all arguments and options to Terraform. The only exceptions are the options that start with the prefix --terragrunt-. The currently available options are:

• --terragrunt-config: A custom path to the .terragrunt file. May also be specified via the TERRAGRUNT_CONFIG environment variable. The default path is .terragrunt in the current directory.
• --terragrunt-non-interactive: Don't show interactive user prompts. This will default the answer for all prompts to 'yes'. Useful if you need to run Terragrunt in an automated setting (e.g. from a script).

Developing terragrunt

Running locally

To run Terragrunt locally, use the go run command:

go run main.go plan

Running tests

Note: The tests in the dynamodb folder for Terragrunt run against a real AWS account and will add and remove real data from DynamoDB. DO NOT hit CTRL+C while the tests are running, as this will prevent them from cleaning up temporary tables and data in DynamoDB. We are not responsible for any charges you may incur.

Before running the tests, you must configure your AWS credentials as explained in the DynamoDB locking prerequisites section.

To run all the tests:

go test -v -parallel 128 $(glide novendor)

To run only the tests in a specific package, such as the package remote:

cd remote
go test -v -parallel 128

And to run a specific test, such as TestToTerraformRemoteConfigArgsNoBackendConfigs in package remote:

cd remote
go test -v -parallel 128 -run TestToTerraformRemoteConfigArgsNoBackendConfigs

Debug logging

If you set the TERRAGRUNT_DEBUG environment variable to "true", the stack trace for any error will be printed to stdout when you run the app.

Error handling

In this project, we try to ensure that:

1. Every error has a stacktrace. This makes debugging easier.
2. Every error generated by our own code (as opposed to errors from Go built-in functions or errors from 3rd party libraries) has a custom type. This makes error handling more precise, as we can decide to handle different types of errors differently.

To accomplish these two goals, we have created an errors package that has several helper methods, such as errors.WithStackTrace(err error), which wraps the given error in an Error object that contains a stacktrace. Under the hood, the errors package is using the go-errors library, but this may change in the future, so the rest of the code should not depend on go-errors directly.

Here is how the errors package should be used:

1. Any time you want to create your own error, create a custom type for it, and when instantiating that type, wrap it with a call to errors.WithStackTrace. That way, any time you call a method defined in the Terragrunt code, you know the error it returns already has a stacktrace and you don't have to wrap it yourself.
2. Any time you get back an error object from a function built into Go or a 3rd party library, immediately wrap it with errors.WithStackTrace. This gives us a stacktrace as close to the source as possible.
3. If you need to get back the underlying error, you can use the errors.IsError and errors.Unwrap functions.

Releasing new versions

To release a new version, just go to the Releases Page and create a new release. The CircleCI job for this repo has been configured to:

1. Automatically detect new tags.
2. Build binaries for every OS using that tag as a version number.
3. Upload the binaries to the release in GitHub.

See circle.yml and _ci/build-and-push-release-asset.sh for details.

License

This code is released under the MIT License. See LICENSE.txt.

TODO

• Add a check that modules have been downloaded using terraform get.
• Add a check that all local changes have been committed before running terraform apply.
• Consider implementing alternative locking mechanisms, such as using Git instead of DynamoDB.
• Consider embedding the Terraform Go code within Terragrunt instead of calling out to it.
• Add a show-lock command.
• Add a command to automatically set up best-practices remote state storage in a versioned, encrypted, S3 bucket.
• Add a command to list the different versions of state available in a versioned S3 bucket and to diff any two state files.