swarm

package
v0.23.5 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Nov 8, 2022 License: MIT Imports: 23 Imported by: 0

Documentation

Index

Constants

View Source 
const ConcurrentFdDials = 160

ConcurrentFdDials is the number of concurrent outbound dials over transports that consume file descriptors

View Source 
const DialAttempts = 1

DialAttempts governs how many times a goroutine will try to dial a given peer. Note: this is down to one, as we have _too many dials_ atm. To add back in, add loop back in Dial(.)

Variables

View Source 
var (
	// ErrDialBackoff is returned by the backoff code when a given peer has
	// been dialed too frequently
	ErrDialBackoff = errors.New("dial backoff")

	// ErrDialToSelf is returned if we attempt to dial our own peer
	ErrDialToSelf = errors.New("dial to self attempted")

	// ErrNoTransport is returned when we don't know a transport for the
	// given multiaddr.
	ErrNoTransport = errors.New("no transport for protocol")

	// ErrAllDialsFailed is returned when connecting to a peer has ultimately failed
	ErrAllDialsFailed = errors.New("all dials failed")

	// ErrNoAddresses is returned when we fail to find any addresses for a
	// peer we're trying to dial.
	ErrNoAddresses = errors.New("no addresses")

	// ErrNoGoodAddresses is returned when we find addresses for a peer but
	// can't use any of them.
	ErrNoGoodAddresses = errors.New("no good addresses")

	// ErrGaterDisallowedConnection is returned when the gater prevents us from
	// forming a connection with a peer.
	ErrGaterDisallowedConnection = errors.New("gater disallows connection to peer")
)
View Source 
var BackoffBase = time.Second * 5

BackoffBase is the base amount of time to backoff (default: 5s).

View Source 
var BackoffCoef = time.Second

BackoffCoef is the backoff coefficient (default: 1s).

View Source 
var BackoffMax = time.Minute * 5

BackoffMax is the maximum backoff time (default: 5m).

View Source 
var DefaultPerPeerRateLimit = 8

DefaultPerPeerRateLimit is the number of concurrent outbound dials to make per peer

View Source 
var ErrAddrFiltered = errors.New("address filtered")

ErrAddrFiltered is returned when trying to register a connection to a filtered address. You shouldn't see this error unless some underlying transport is misbehaving.

View Source 
var ErrConnClosed = errors.New("connection closed")

ErrConnClosed is returned when operating on a closed connection.

View Source 
var ErrDialTimeout = errors.New("dial timed out")

ErrDialTimeout is returned when one a dial times out due to the global timeout

View Source 
var ErrSwarmClosed = errors.New("swarm closed")

ErrSwarmClosed is returned when one attempts to operate on a closed swarm.

Functions

This section is empty.

Types

type Conn 

type Conn struct {
	// contains filtered or unexported fields
}

Conn is the connection type used by swarm. In general, you won't use this type directly.

func (*Conn) Close 

func (c *Conn) Close() error

Close closes this connection.

Note: This method won't wait for the close notifications to finish as that would create a deadlock when called from an open notification (because all open notifications must finish before we can fire off the close notifications).

func (*Conn) GetStreams 

func (c *Conn) GetStreams() []network.Stream

GetStreams returns the streams associated with this connection.

func (*Conn) ID 

func (c *Conn) ID() string

func (*Conn) LocalMultiaddr 

func (c *Conn) LocalMultiaddr() ma.Multiaddr

LocalMultiaddr is the Multiaddr on this side

func (*Conn) LocalPeer 

func (c *Conn) LocalPeer() peer.ID

LocalPeer is the Peer on our side of the connection

func (*Conn) LocalPrivateKey 

func (c *Conn) LocalPrivateKey() ic.PrivKey

LocalPrivateKey is the public key of the peer on this side

func (*Conn) NewStream 

func (c *Conn) NewStream(ctx context.Context) (network.Stream, error)

NewStream returns a new Stream from this connection

func (*Conn) RemoteMultiaddr 

func (c *Conn) RemoteMultiaddr() ma.Multiaddr

RemoteMultiaddr is the Multiaddr on the remote side

func (*Conn) RemotePeer 

func (c *Conn) RemotePeer() peer.ID

RemotePeer is the Peer on the remote side

func (*Conn) RemotePublicKey 

func (c *Conn) RemotePublicKey() ic.PubKey

RemotePublicKey is the public key of the peer on the remote side

func (*Conn) Scope 

func (c *Conn) Scope() network.ConnScope

func (*Conn) Stat 

func (c *Conn) Stat() network.ConnStats

Stat returns metadata pertaining to this connection

func (*Conn) String 

func (c *Conn) String() string

type DialBackoff 

type DialBackoff struct {
	// contains filtered or unexported fields
}

DialBackoff is a type for tracking peer dial backoffs.

* It's safe to use its zero value. * It's thread-safe. * It's *not* safe to move this type after using.

func (*DialBackoff) AddBackoff 

func (db *DialBackoff) AddBackoff(p peer.ID, addr ma.Multiaddr)

AddBackoff lets other nodes know that we've entered backoff with peer p, so dialers should not wait unnecessarily. We still will attempt to dial with one goroutine, in case we get through.

Backoff is not exponential, it's quadratic and computed according to the following formula: 

BackoffBase + BakoffCoef * PriorBackoffs^2

Where PriorBackoffs is the number of previous backoffs.

func (*DialBackoff) Backoff 

func (db *DialBackoff) Backoff(p peer.ID, addr ma.Multiaddr) (backoff bool)

Backoff returns whether the client should backoff from dialing peer p at address addr

func (*DialBackoff) Clear 

func (db *DialBackoff) Clear(p peer.ID)

Clear removes a backoff record. Clients should call this after a successful Dial.

type DialError 

type DialError struct {
	Peer       peer.ID
	DialErrors []TransportError
	Cause      error
	Skipped    int
}

DialError is the error type returned when dialing.

func (*DialError) Error 

func (e *DialError) Error() string

func (*DialError) Timeout 

func (e *DialError) Timeout() bool

func (*DialError) Unwrap 

func (e *DialError) Unwrap() error

Unwrap implements https://godoc.org/golang.org/x/xerrors#Wrapper.

type Option 

type Option func(*Swarm) error

func WithConnectionGater 

func WithConnectionGater(gater connmgr.ConnectionGater) Option

WithConnectionGater sets a connection gater

func WithDialTimeout 

func WithDialTimeout(t time.Duration) Option

func WithDialTimeoutLocal 

func WithDialTimeoutLocal(t time.Duration) Option

func WithMetrics 

func WithMetrics(reporter metrics.Reporter) Option

WithMetrics sets a metrics reporter

func WithMultiaddrResolver 

func WithMultiaddrResolver(maResolver *madns.Resolver) Option

WithMultiaddrResolver sets a custom multiaddress resolver

func WithResourceManager 

func WithResourceManager(m network.ResourceManager) Option

type Stream 

type Stream struct {
	// contains filtered or unexported fields
}

Stream is the stream type used by swarm. In general, you won't use this type directly.

func (*Stream) Close 

func (s *Stream) Close() error

Close closes the stream, closing both ends and freeing all associated resources.

func (*Stream) CloseRead 

func (s *Stream) CloseRead() error

CloseRead closes the stream for reading. This function does not free resources, call Close or Reset when done with the stream.

func (*Stream) CloseWrite 

func (s *Stream) CloseWrite() error

CloseWrite closes the stream for writing, flushing all data and sending an EOF. This function does not free resources, call Close or Reset when done with the stream.

func (*Stream) Conn 

func (s *Stream) Conn() network.Conn

Conn returns the Conn associated with this stream, as an network.Conn

func (*Stream) ID 

func (s *Stream) ID() string

func (*Stream) Protocol 

func (s *Stream) Protocol() protocol.ID

Protocol returns the protocol negotiated on this stream (if set).

func (*Stream) Read 

func (s *Stream) Read(p []byte) (int, error)

Read reads bytes from a stream.

func (*Stream) Reset 

func (s *Stream) Reset() error

Reset resets the stream, signaling an error on both ends and freeing all associated resources.

func (*Stream) Scope 

func (s *Stream) Scope() network.StreamScope

func (*Stream) SetDeadline 

func (s *Stream) SetDeadline(t time.Time) error

SetDeadline sets the read and write deadlines for this stream.

func (*Stream) SetProtocol 

func (s *Stream) SetProtocol(p protocol.ID) error

SetProtocol sets the protocol for this stream.

This doesn't actually *do* anything other than record the fact that we're speaking the given protocol over this stream. It's still up to the user to negotiate the protocol. This is usually done by the Host.

func (*Stream) SetReadDeadline 

func (s *Stream) SetReadDeadline(t time.Time) error

SetReadDeadline sets the read deadline for this stream.

func (*Stream) SetWriteDeadline 

func (s *Stream) SetWriteDeadline(t time.Time) error

SetWriteDeadline sets the write deadline for this stream.

func (*Stream) Stat 

func (s *Stream) Stat() network.Stats

Stat returns metadata information for this stream.

func (*Stream) String 

func (s *Stream) String() string

func (*Stream) Write 

func (s *Stream) Write(p []byte) (int, error)

Write writes bytes to a stream, flushing for each call.

type Swarm 

type Swarm struct {
	// contains filtered or unexported fields
}

Swarm is a connection muxer, allowing connections to other peers to be opened and closed, while still using the same Chan for all communication. The Chan sends/receives Messages, which note the destination or source Peer.

func NewSwarm 

func NewSwarm(local peer.ID, peers peerstore.Peerstore, opts ...Option) (*Swarm, error)

NewSwarm constructs a Swarm.

func (*Swarm) AddListenAddr 

func (s *Swarm) AddListenAddr(a ma.Multiaddr) error

AddListenAddr tells the swarm to listen on a single address. Unlike Listen, this method does not attempt to filter out bad addresses.

func (*Swarm) AddTransport 

func (s *Swarm) AddTransport(t transport.Transport) error

AddTransport adds a transport to this swarm.

Satisfies the Network interface from go-libp2p-transport.

func (*Swarm) Backoff 

func (s *Swarm) Backoff() *DialBackoff

Backoff returns the DialBackoff object for this swarm.

func (*Swarm) Close 

func (s *Swarm) Close() error

func (*Swarm) ClosePeer 

func (s *Swarm) ClosePeer(p peer.ID) error

ClosePeer closes all connections to the given peer.

func (*Swarm) Connectedness 

func (s *Swarm) Connectedness(p peer.ID) network.Connectedness

Connectedness returns our "connectedness" state with the given peer.

To check if we have an open connection, use `s.Connectedness(p) == network.Connected`.

func (*Swarm) Conns 

func (s *Swarm) Conns() []network.Conn

Conns returns a slice of all connections.

func (*Swarm) ConnsToPeer 

func (s *Swarm) ConnsToPeer(p peer.ID) []network.Conn

ConnsToPeer returns all the live connections to peer.

func (*Swarm) DialPeer 

func (s *Swarm) DialPeer(ctx context.Context, p peer.ID) (network.Conn, error)

DialPeer connects to a peer.

The idea is that the client of Swarm does not need to know what network the connection will happen over. Swarm can use whichever it choses. This allows us to use various transport protocols, do NAT traversal/relay, etc. to achieve connection.

func (*Swarm) InterfaceListenAddresses 

func (s *Swarm) InterfaceListenAddresses() ([]ma.Multiaddr, error)

InterfaceListenAddresses returns a list of addresses at which this swarm listens. It expands "any interface" addresses (/ip4/0.0.0.0, /ip6/::) to use the known local interfaces.

func (*Swarm) Listen 

func (s *Swarm) Listen(addrs ...ma.Multiaddr) error

Listen sets up listeners for all of the given addresses. It returns as long as we successfully listen on at least *one* address.

func (*Swarm) ListenAddresses 

func (s *Swarm) ListenAddresses() []ma.Multiaddr

ListenAddresses returns a list of addresses at which this swarm listens.

func (*Swarm) ListenClose 

func (s *Swarm) ListenClose(addrs ...ma.Multiaddr)

ListenClose stop and delete listeners for all of the given addresses.

func (*Swarm) LocalPeer 

func (s *Swarm) LocalPeer() peer.ID

LocalPeer returns the local peer swarm is associated to.

func (*Swarm) NewStream 

func (s *Swarm) NewStream(ctx context.Context, p peer.ID) (network.Stream, error)

NewStream creates a new stream on any available connection to peer, dialing if necessary.

func (*Swarm) Notify 

func (s *Swarm) Notify(f network.Notifiee)

Notify signs up Notifiee to receive signals when events happen

func (*Swarm) Peers 

func (s *Swarm) Peers() []peer.ID

Peers returns a copy of the set of peers swarm is connected to.

func (*Swarm) Peerstore 

func (s *Swarm) Peerstore() peerstore.Peerstore

Peerstore returns this swarms internal Peerstore.

func (*Swarm) ResourceManager 

func (s *Swarm) ResourceManager() network.ResourceManager

func (*Swarm) SetStreamHandler 

func (s *Swarm) SetStreamHandler(handler network.StreamHandler)

SetStreamHandler assigns the handler for new streams.

func (*Swarm) StopNotify 

func (s *Swarm) StopNotify(f network.Notifiee)

StopNotify unregisters Notifiee fromr receiving signals

func (*Swarm) StreamHandler 

func (s *Swarm) StreamHandler() network.StreamHandler

StreamHandler gets the handler for new streams.

func (*Swarm) String 

func (s *Swarm) String() string

String returns a string representation of Network.

func (*Swarm) TransportForDialing 

func (s *Swarm) TransportForDialing(a ma.Multiaddr) transport.Transport

TransportForDialing retrieves the appropriate transport for dialing the given multiaddr.

func (*Swarm) TransportForListening 

func (s *Swarm) TransportForListening(a ma.Multiaddr) transport.Transport

TransportForListening retrieves the appropriate transport for listening on the given multiaddr.

type TransportError 

type TransportError struct {
	Address ma.Multiaddr
	Cause   error
}

TransportError is the error returned when dialing a specific address.

func (*TransportError) Error 

func (e *TransportError) Error() string

Source Files

View all Source files

Directories

Path Synopsis

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.