types

package
v2.11.1-beta0 Latest Latest
Warning

This package is not in the latest version of its module.

Go to latest
Published: May 20, 2024 License: MIT Imports: 17 Imported by: 0

Documentation

Index

Constants

This section is empty.

Variables

This section is empty.

Functions

This section is empty.

Types

type BroadcasterChainConfig added in v2.3.0

type BroadcasterChainConfig interface {
	IsL2() bool
}

type BroadcasterFeeConfig added in v2.3.0

type BroadcasterFeeConfig interface {
	MaxFeePrice() string     // logging value
	FeePriceDefault() string // logging value
}

type BroadcasterListenerConfig added in v2.3.0

type BroadcasterListenerConfig interface {
	FallbackPollInterval() time.Duration
}

type BroadcasterTransactionsConfig added in v2.3.0

type BroadcasterTransactionsConfig interface {
	MaxInFlight() uint32
}

type ChainClient added in v2.3.0

type ChainClient[
	CHAIN_ID types.ID,
	ADDR types.Hashable,
	SEQ types.Sequence,
] interface {
	ConfiguredChainID() CHAIN_ID
	PendingSequenceAt(ctx context.Context, addr ADDR) (SEQ, error)
	SequenceAt(ctx context.Context, addr ADDR, blockNum *big.Int) (SEQ, error)
}

ChainClient contains the interfaces for reading chain parameters (chain id, sequences, etc)

type ChainReceipt added in v2.2.0

type ChainReceipt[TX_HASH, BLOCK_HASH types.Hashable] interface {
	GetStatus() uint64
	GetTxHash() TX_HASH
	GetBlockNumber() *big.Int
	IsZero() bool
	IsUnmined() bool
	GetFeeUsed() uint64
	GetTransactionIndex() uint
	GetBlockHash() BLOCK_HASH
}

type ConfirmerChainConfig added in v2.3.0

type ConfirmerChainConfig interface {
	RPCDefaultBatchSize() uint32
	FinalityDepth() uint32
}

type ConfirmerDatabaseConfig added in v2.3.0

type ConfirmerDatabaseConfig interface {
	// from pg.QConfig
	DefaultQueryTimeout() time.Duration
}

type ConfirmerFeeConfig added in v2.3.0

type ConfirmerFeeConfig interface {
	BumpTxDepth() uint32
	LimitDefault() uint64

	// from gas.Config
	BumpThreshold() uint64
	MaxFeePrice() string // logging value
	BumpPercent() uint16
}

type ConfirmerTransactionsConfig added in v2.3.0

type ConfirmerTransactionsConfig interface {
	MaxInFlight() uint32
	ForwardersEnabled() bool
}

type ForwarderManager

type ForwarderManager[ADDR types.Hashable] interface {
	services.Service
	ForwarderFor(addr ADDR) (forwarder ADDR, err error)
	// Converts payload to be forwarder-friendly
	ConvertPayload(dest ADDR, origPayload []byte) ([]byte, error)
}

type KeyStore added in v2.1.0

type KeyStore[

	ADDR types.Hashable,

	CHAIN_ID types.ID,

	SEQ types.Sequence,
] interface {
	CheckEnabled(ctx context.Context, address ADDR, chainID CHAIN_ID) error
	EnabledAddressesForChain(ctx context.Context, chainId CHAIN_ID) ([]ADDR, error)
	SubscribeToKeyChanges(ctx context.Context) (ch chan struct{}, unsub func())
}

KeyStore encompasses the subset of keystore used by txmgr

type ReaperChainConfig added in v2.3.0

type ReaperChainConfig interface {
	FinalityDepth() uint32
}

ReaperConfig is the config subset used by the reaper

type ReaperTransactionsConfig added in v2.3.0

type ReaperTransactionsConfig interface {
	ReaperInterval() time.Duration
	ReaperThreshold() time.Duration
}

type ReceiptPlus

type ReceiptPlus[R any] struct {
	ID           uuid.UUID `db:"pipeline_run_id"`
	Receipt      R         `db:"receipt"`
	FailOnRevert bool      `db:"fail_on_revert"`
}

R is the raw unparsed transaction receipt

type ResenderChainConfig added in v2.3.0

type ResenderChainConfig interface {
	RPCDefaultBatchSize() uint32
}

type ResenderTransactionsConfig added in v2.3.0

type ResenderTransactionsConfig interface {
	ResendAfterThreshold() time.Duration
	MaxInFlight() uint32
}

type SequenceTracker added in v2.11.0

type SequenceTracker[

	ADDR types.Hashable,

	SEQ types.Sequence,
] interface {
	// Load the next sequence needed for transactions for all enabled addresses
	LoadNextSequences(context.Context, []ADDR)
	// Get the next sequence to assign to a transaction
	GetNextSequence(context.Context, ADDR) (SEQ, error)
	// Signals the existing sequence has been used so generates and stores the next sequence
	// Can be a no-op depending on the chain
	GenerateNextSequence(ADDR, SEQ)
	// Syncs the local sequence with the one on-chain in case the address as been used externally
	// Can be a no-op depending on the chain
	SyncSequence(context.Context, ADDR, services.StopChan)
}

type TransactionClient added in v2.3.0

type TransactionClient[
	CHAIN_ID types.ID,
	ADDR types.Hashable,
	TX_HASH types.Hashable,
	BLOCK_HASH types.Hashable,
	SEQ types.Sequence,
	FEE feetypes.Fee,
] interface {
	ChainClient[CHAIN_ID, ADDR, SEQ]

	BatchSendTransactions(
		ctx context.Context,
		attempts []TxAttempt[CHAIN_ID, ADDR, TX_HASH, BLOCK_HASH, SEQ, FEE],
		bathSize int,
		lggr logger.SugaredLogger,
	) (
		txCodes []client.SendTxReturnCode,
		txErrs []error,
		broadcastTime time.Time,
		successfulTxIDs []int64,
		err error)
	SendTransactionReturnCode(
		ctx context.Context,
		tx Tx[CHAIN_ID, ADDR, TX_HASH, BLOCK_HASH, SEQ, FEE],
		attempt TxAttempt[CHAIN_ID, ADDR, TX_HASH, BLOCK_HASH, SEQ, FEE],
		lggr logger.SugaredLogger,
	) (client.SendTxReturnCode, error)
	SendEmptyTransaction(
		ctx context.Context,
		newTxAttempt func(ctx context.Context, seq SEQ, feeLimit uint64, fee FEE, fromAddress ADDR) (attempt TxAttempt[CHAIN_ID, ADDR, TX_HASH, BLOCK_HASH, SEQ, FEE], err error),
		seq SEQ,
		gasLimit uint64,
		fee FEE,
		fromAddress ADDR,
	) (txhash string, err error)
	CallContract(
		ctx context.Context,
		attempt TxAttempt[CHAIN_ID, ADDR, TX_HASH, BLOCK_HASH, SEQ, FEE],
		blockNumber *big.Int,
	) (rpcErr fmt.Stringer, extractErr error)
}

TransactionClient contains the methods for building, simulating, broadcasting transactions

type TransactionManagerChainConfig added in v2.3.0

type TransactionManagerChainConfig interface {
	BroadcasterChainConfig
	ConfirmerChainConfig
	ReaperChainConfig
}

type TransactionManagerFeeConfig added in v2.3.0

type TransactionManagerFeeConfig interface {
	BroadcasterFeeConfig
	ConfirmerFeeConfig
}

type TransactionManagerTransactionsConfig added in v2.3.0

type TransactionManagerTransactionsConfig interface {
	BroadcasterTransactionsConfig
	ConfirmerTransactionsConfig
	ResenderTransactionsConfig
	ReaperTransactionsConfig

	ForwardersEnabled() bool
	MaxQueued() uint64
}

type TransactionStore added in v2.3.0

type TransactionStore[
	ADDR types.Hashable,
	CHAIN_ID types.ID,
	TX_HASH types.Hashable,
	BLOCK_HASH types.Hashable,
	SEQ types.Sequence,
	FEE feetypes.Fee,
] interface {
	CountUnconfirmedTransactions(ctx context.Context, fromAddress ADDR, chainID CHAIN_ID) (count uint32, err error)
	CountTransactionsByState(ctx context.Context, state TxState, chainID CHAIN_ID) (count uint32, err error)
	CountUnstartedTransactions(ctx context.Context, fromAddress ADDR, chainID CHAIN_ID) (count uint32, err error)
	CreateTransaction(ctx context.Context, txRequest TxRequest[ADDR, TX_HASH], chainID CHAIN_ID) (tx Tx[CHAIN_ID, ADDR, TX_HASH, BLOCK_HASH, SEQ, FEE], err error)
	DeleteInProgressAttempt(ctx context.Context, attempt TxAttempt[CHAIN_ID, ADDR, TX_HASH, BLOCK_HASH, SEQ, FEE]) error
	FindLatestSequence(ctx context.Context, fromAddress ADDR, chainId CHAIN_ID) (SEQ, error)
	FindTxsRequiringGasBump(ctx context.Context, address ADDR, blockNum, gasBumpThreshold, depth int64, chainID CHAIN_ID) (etxs []*Tx[CHAIN_ID, ADDR, TX_HASH, BLOCK_HASH, SEQ, FEE], err error)
	FindTxsRequiringResubmissionDueToInsufficientFunds(ctx context.Context, address ADDR, chainID CHAIN_ID) (etxs []*Tx[CHAIN_ID, ADDR, TX_HASH, BLOCK_HASH, SEQ, FEE], err error)
	FindTxAttemptsConfirmedMissingReceipt(ctx context.Context, chainID CHAIN_ID) (attempts []TxAttempt[CHAIN_ID, ADDR, TX_HASH, BLOCK_HASH, SEQ, FEE], err error)
	FindTxAttemptsRequiringReceiptFetch(ctx context.Context, chainID CHAIN_ID) (attempts []TxAttempt[CHAIN_ID, ADDR, TX_HASH, BLOCK_HASH, SEQ, FEE], err error)
	FindTxAttemptsRequiringResend(ctx context.Context, olderThan time.Time, maxInFlightTransactions uint32, chainID CHAIN_ID, address ADDR) (attempts []TxAttempt[CHAIN_ID, ADDR, TX_HASH, BLOCK_HASH, SEQ, FEE], err error)
	// Search for Tx using the idempotencyKey and chainID
	FindTxWithIdempotencyKey(ctx context.Context, idempotencyKey string, chainID CHAIN_ID) (tx *Tx[CHAIN_ID, ADDR, TX_HASH, BLOCK_HASH, SEQ, FEE], err error)
	// Search for Tx using the fromAddress and sequence
	FindTxWithSequence(ctx context.Context, fromAddress ADDR, seq SEQ) (etx *Tx[CHAIN_ID, ADDR, TX_HASH, BLOCK_HASH, SEQ, FEE], err error)
	FindNextUnstartedTransactionFromAddress(ctx context.Context, fromAddress ADDR, chainID CHAIN_ID) (*Tx[CHAIN_ID, ADDR, TX_HASH, BLOCK_HASH, SEQ, FEE], error)
	FindTransactionsConfirmedInBlockRange(ctx context.Context, highBlockNumber, lowBlockNumber int64, chainID CHAIN_ID) (etxs []*Tx[CHAIN_ID, ADDR, TX_HASH, BLOCK_HASH, SEQ, FEE], err error)
	FindEarliestUnconfirmedBroadcastTime(ctx context.Context, chainID CHAIN_ID) (null.Time, error)
	FindEarliestUnconfirmedTxAttemptBlock(ctx context.Context, chainID CHAIN_ID) (null.Int, error)
	GetTxInProgress(ctx context.Context, fromAddress ADDR) (etx *Tx[CHAIN_ID, ADDR, TX_HASH, BLOCK_HASH, SEQ, FEE], err error)
	GetInProgressTxAttempts(ctx context.Context, address ADDR, chainID CHAIN_ID) (attempts []TxAttempt[CHAIN_ID, ADDR, TX_HASH, BLOCK_HASH, SEQ, FEE], err error)
	GetNonFatalTransactions(ctx context.Context, chainID CHAIN_ID) (txs []*Tx[CHAIN_ID, ADDR, TX_HASH, BLOCK_HASH, SEQ, FEE], err error)
	GetTxByID(ctx context.Context, id int64) (tx *Tx[CHAIN_ID, ADDR, TX_HASH, BLOCK_HASH, SEQ, FEE], err error)
	HasInProgressTransaction(ctx context.Context, account ADDR, chainID CHAIN_ID) (exists bool, err error)
	LoadTxAttempts(ctx context.Context, etx *Tx[CHAIN_ID, ADDR, TX_HASH, BLOCK_HASH, SEQ, FEE]) error
	MarkAllConfirmedMissingReceipt(ctx context.Context, chainID CHAIN_ID) (err error)
	MarkOldTxesMissingReceiptAsErrored(ctx context.Context, blockNum int64, finalityDepth uint32, chainID CHAIN_ID) error
	PreloadTxes(ctx context.Context, attempts []TxAttempt[CHAIN_ID, ADDR, TX_HASH, BLOCK_HASH, SEQ, FEE]) error
	SaveConfirmedMissingReceiptAttempt(ctx context.Context, timeout time.Duration, attempt *TxAttempt[CHAIN_ID, ADDR, TX_HASH, BLOCK_HASH, SEQ, FEE], broadcastAt time.Time) error
	SaveInProgressAttempt(ctx context.Context, attempt *TxAttempt[CHAIN_ID, ADDR, TX_HASH, BLOCK_HASH, SEQ, FEE]) error
	SaveInsufficientFundsAttempt(ctx context.Context, timeout time.Duration, attempt *TxAttempt[CHAIN_ID, ADDR, TX_HASH, BLOCK_HASH, SEQ, FEE], broadcastAt time.Time) error
	SaveReplacementInProgressAttempt(ctx context.Context, oldAttempt TxAttempt[CHAIN_ID, ADDR, TX_HASH, BLOCK_HASH, SEQ, FEE], replacementAttempt *TxAttempt[CHAIN_ID, ADDR, TX_HASH, BLOCK_HASH, SEQ, FEE]) error
	SaveSentAttempt(ctx context.Context, timeout time.Duration, attempt *TxAttempt[CHAIN_ID, ADDR, TX_HASH, BLOCK_HASH, SEQ, FEE], broadcastAt time.Time) error
	SetBroadcastBeforeBlockNum(ctx context.Context, blockNum int64, chainID CHAIN_ID) error
	UpdateBroadcastAts(ctx context.Context, now time.Time, etxIDs []int64) error
	UpdateTxAttemptInProgressToBroadcast(ctx context.Context, etx *Tx[CHAIN_ID, ADDR, TX_HASH, BLOCK_HASH, SEQ, FEE], attempt TxAttempt[CHAIN_ID, ADDR, TX_HASH, BLOCK_HASH, SEQ, FEE], NewAttemptState TxAttemptState) error
	// Update tx to mark that its callback has been signaled
	UpdateTxCallbackCompleted(ctx context.Context, pipelineTaskRunRid uuid.UUID, chainId CHAIN_ID) error
	UpdateTxsUnconfirmed(ctx context.Context, ids []int64) error
	UpdateTxUnstartedToInProgress(ctx context.Context, etx *Tx[CHAIN_ID, ADDR, TX_HASH, BLOCK_HASH, SEQ, FEE], attempt *TxAttempt[CHAIN_ID, ADDR, TX_HASH, BLOCK_HASH, SEQ, FEE]) error
	UpdateTxFatalError(ctx context.Context, etx *Tx[CHAIN_ID, ADDR, TX_HASH, BLOCK_HASH, SEQ, FEE]) error
	UpdateTxForRebroadcast(ctx context.Context, etx Tx[CHAIN_ID, ADDR, TX_HASH, BLOCK_HASH, SEQ, FEE], etxAttempt TxAttempt[CHAIN_ID, ADDR, TX_HASH, BLOCK_HASH, SEQ, FEE]) error
	IsTxFinalized(ctx context.Context, blockHeight int64, txID int64, chainID CHAIN_ID) (finalized bool, err error)
}

TransactionStore contains the persistence layer methods needed to manage Txs and TxAttempts

type TransmitCheckerSpec added in v2.1.0

type TransmitCheckerSpec[ADDR types.Hashable] struct {
	// CheckerType is the type of check that should be performed. Empty indicates no check.
	CheckerType TransmitCheckerType `json:",omitempty"`

	// VRFCoordinatorAddress is the address of the VRF coordinator that should be used to perform
	// VRF transmit checks. This should be set iff CheckerType is TransmitCheckerTypeVRFV2.
	VRFCoordinatorAddress *ADDR `json:",omitempty"`

	// VRFRequestBlockNumber is the block number in which the provided VRF request has been made.
	// This should be set iff CheckerType is TransmitCheckerTypeVRFV2.
	VRFRequestBlockNumber *big.Int `json:",omitempty"`
}

TransmitCheckerSpec defines the check that should be performed before a transaction is submitted on chain.

type TransmitCheckerType added in v2.1.0

type TransmitCheckerType string

TransmitCheckerType describes the type of check that should be performed before a transaction is executed on-chain.

type Tx added in v2.2.0

type Tx[
	CHAIN_ID types.ID,
	ADDR types.Hashable,
	TX_HASH, BLOCK_HASH types.Hashable,
	SEQ types.Sequence,
	FEE feetypes.Fee,
] struct {
	ID             int64
	IdempotencyKey *string
	Sequence       *SEQ
	FromAddress    ADDR
	ToAddress      ADDR
	EncodedPayload []byte
	Value          big.Int
	// FeeLimit on the Tx is always the conceptual gas limit, which is not
	// necessarily the same as the on-chain encoded value (i.e. Optimism)
	FeeLimit uint64
	Error    null.String
	// BroadcastAt is updated every time an attempt for this tx is re-sent
	// In almost all cases it will be within a second or so of the actual send time.
	BroadcastAt *time.Time
	// InitialBroadcastAt is recorded once, the first ever time this tx is sent
	InitialBroadcastAt *time.Time
	CreatedAt          time.Time
	State              TxState
	TxAttempts         []TxAttempt[CHAIN_ID, ADDR, TX_HASH, BLOCK_HASH, SEQ, FEE] `json:"-"`
	// Marshalled TxMeta
	// Used for additional context around transactions which you want to log
	// at send time.
	Meta    *sqlutil.JSON
	Subject uuid.NullUUID
	ChainID CHAIN_ID

	PipelineTaskRunID uuid.NullUUID
	MinConfirmations  clnull.Uint32

	// TransmitChecker defines the check that should be performed before a transaction is submitted on
	// chain.
	TransmitChecker *sqlutil.JSON

	// Marks tx requiring callback
	SignalCallback bool
	// Marks tx callback as signaled
	CallbackCompleted bool
}

func (*Tx[CHAIN_ID, ADDR, TX_HASH, BLOCK_HASH, SEQ, FEE]) GetChecker added in v2.2.0

func (e *Tx[CHAIN_ID, ADDR, TX_HASH, BLOCK_HASH, SEQ, FEE]) GetChecker() (TransmitCheckerSpec[ADDR], error)

GetChecker returns an Tx's transmit checker spec in struct form, unmarshalling it from JSON first.

func (*Tx[CHAIN_ID, ADDR, TX_HASH, BLOCK_HASH, SEQ, FEE]) GetError added in v2.2.0

func (e *Tx[CHAIN_ID, ADDR, TX_HASH, BLOCK_HASH, SEQ, FEE]) GetError() error

func (*Tx[CHAIN_ID, ADDR, TX_HASH, BLOCK_HASH, SEQ, FEE]) GetID added in v2.2.0

func (e *Tx[CHAIN_ID, ADDR, TX_HASH, BLOCK_HASH, SEQ, FEE]) GetID() string

GetID allows Tx to be used as jsonapi.MarshalIdentifier

func (*Tx[CHAIN_ID, ADDR, TX_HASH, BLOCK_HASH, SEQ, FEE]) GetLogger added in v2.2.0

func (e *Tx[CHAIN_ID, ADDR, TX_HASH, BLOCK_HASH, SEQ, FEE]) GetLogger(lgr logger.Logger) logger.SugaredLogger

GetLogger returns a new logger with metadata fields.

func (*Tx[CHAIN_ID, ADDR, TX_HASH, BLOCK_HASH, SEQ, FEE]) GetMeta added in v2.2.0

func (e *Tx[CHAIN_ID, ADDR, TX_HASH, BLOCK_HASH, SEQ, FEE]) GetMeta() (*TxMeta[ADDR, TX_HASH], error)

GetMeta returns an Tx's meta in struct form, unmarshalling it from JSON first.

type TxAttempt added in v2.2.0

type TxAttempt[
	CHAIN_ID types.ID,
	ADDR types.Hashable,
	TX_HASH, BLOCK_HASH types.Hashable,
	SEQ types.Sequence,
	FEE feetypes.Fee,
] struct {
	ID    int64
	TxID  int64
	Tx    Tx[CHAIN_ID, ADDR, TX_HASH, BLOCK_HASH, SEQ, FEE]
	TxFee FEE
	// ChainSpecificFeeLimit on the TxAttempt is always the same as the on-chain encoded value for fee limit
	ChainSpecificFeeLimit   uint64
	SignedRawTx             []byte
	Hash                    TX_HASH
	CreatedAt               time.Time
	BroadcastBeforeBlockNum *int64
	State                   TxAttemptState
	Receipts                []ChainReceipt[TX_HASH, BLOCK_HASH] `json:"-"`
	TxType                  int
}

func (*TxAttempt[CHAIN_ID, ADDR, TX_HASH, BLOCK_HASH, SEQ, FEE]) String added in v2.2.0

func (a *TxAttempt[CHAIN_ID, ADDR, TX_HASH, BLOCK_HASH, SEQ, FEE]) String() string

type TxAttemptBuilder

type TxAttemptBuilder[
	CHAIN_ID types.ID,
	HEAD types.Head[BLOCK_HASH],
	ADDR types.Hashable,
	TX_HASH, BLOCK_HASH types.Hashable,
	SEQ types.Sequence,
	FEE feetypes.Fee,
] interface {
	// interfaces for running the underlying estimator
	services.Service
	types.HeadTrackable[HEAD, BLOCK_HASH]

	// NewTxAttempt builds a transaction using the configured transaction type and fee estimator (new estimation)
	NewTxAttempt(ctx context.Context, tx Tx[CHAIN_ID, ADDR, TX_HASH, BLOCK_HASH, SEQ, FEE], lggr logger.Logger, opts ...feetypes.Opt) (attempt TxAttempt[CHAIN_ID, ADDR, TX_HASH, BLOCK_HASH, SEQ, FEE], fee FEE, feeLimit uint64, retryable bool, err error)

	// NewTxAttemptWithType builds a transaction using the configured fee estimator (new estimation) + passed in tx type
	NewTxAttemptWithType(ctx context.Context, tx Tx[CHAIN_ID, ADDR, TX_HASH, BLOCK_HASH, SEQ, FEE], lggr logger.Logger, txType int, opts ...feetypes.Opt) (attempt TxAttempt[CHAIN_ID, ADDR, TX_HASH, BLOCK_HASH, SEQ, FEE], fee FEE, feeLimit uint64, retryable bool, err error)

	// NewBumpTxAttempt builds a transaction using the configured fee estimator (bumping) + tx type from previous attempt
	// this should only be used after an initial attempt has been broadcast and the underlying gas estimator only needs to bump the fee
	NewBumpTxAttempt(ctx context.Context, tx Tx[CHAIN_ID, ADDR, TX_HASH, BLOCK_HASH, SEQ, FEE], previousAttempt TxAttempt[CHAIN_ID, ADDR, TX_HASH, BLOCK_HASH, SEQ, FEE], priorAttempts []TxAttempt[CHAIN_ID, ADDR, TX_HASH, BLOCK_HASH, SEQ, FEE], lggr logger.Logger) (attempt TxAttempt[CHAIN_ID, ADDR, TX_HASH, BLOCK_HASH, SEQ, FEE], bumpedFee FEE, bumpedFeeLimit uint64, retryable bool, err error)

	// NewCustomTxAttempt builds a transaction using the passed in fee + tx type
	NewCustomTxAttempt(ctx context.Context, tx Tx[CHAIN_ID, ADDR, TX_HASH, BLOCK_HASH, SEQ, FEE], fee FEE, gasLimit uint64, txType int, lggr logger.Logger) (attempt TxAttempt[CHAIN_ID, ADDR, TX_HASH, BLOCK_HASH, SEQ, FEE], retryable bool, err error)

	// NewEmptyTxAttempt is used in ForceRebroadcast to create a signed tx with zero value sent to the zero address
	NewEmptyTxAttempt(ctx context.Context, seq SEQ, feeLimit uint64, fee FEE, fromAddress ADDR) (attempt TxAttempt[CHAIN_ID, ADDR, TX_HASH, BLOCK_HASH, SEQ, FEE], err error)
}

TxAttemptBuilder takes the base unsigned transaction + optional parameters (tx type, gas parameters) and returns a signed TxAttempt it is able to estimate fees and sign transactions

type TxAttemptState

type TxAttemptState int8
const (
	TxAttemptInProgress TxAttemptState = iota + 1
	TxAttemptInsufficientFunds
	TxAttemptBroadcast
)

func NewTxAttemptState added in v2.4.0

func NewTxAttemptState(state string) (s TxAttemptState)

func (TxAttemptState) String added in v2.4.0

func (s TxAttemptState) String() (str string)

String returns string formatted states for logging

type TxHistoryReaper added in v2.2.0

type TxHistoryReaper[CHAIN_ID types.ID] interface {
	ReapTxHistory(ctx context.Context, minBlockNumberToKeep int64, timeThreshold time.Time, chainID CHAIN_ID) error
}

type TxMeta added in v2.1.0

type TxMeta[ADDR types.Hashable, TX_HASH types.Hashable] struct {
	JobID *int32 `json:"JobID,omitempty"`

	// Pipeline fields
	FailOnRevert null.Bool `json:"FailOnRevert,omitempty"`

	// VRF-only fields
	RequestID     *TX_HASH `json:"RequestID,omitempty"`
	RequestTxHash *TX_HASH `json:"RequestTxHash,omitempty"`
	// Batch variants of the above
	RequestIDs      []TX_HASH `json:"RequestIDs,omitempty"`
	RequestTxHashes []TX_HASH `json:"RequestTxHashes,omitempty"`
	// Used for the VRFv2 - max link this tx will bill
	// should it get bumped
	MaxLink *string `json:"MaxLink,omitempty"`
	// Used for the VRFv2 - the subscription ID of the
	// requester of the VRF.
	SubID *uint64 `json:"SubId,omitempty"`
	// Used for the VRFv2Plus - the uint256 subscription ID of the
	// requester of the VRF.
	GlobalSubID *string `json:"GlobalSubId,omitempty"`
	// Used for VRFv2Plus - max native token this tx will bill
	// should it get bumped
	MaxEth *string `json:"MaxEth,omitempty"`

	// Used for keepers
	UpkeepID *string `json:"UpkeepID,omitempty"`

	// Used for VRF to know if the txn is a ForceFulfilment txn
	ForceFulfilled          *bool   `json:"ForceFulfilled,omitempty"`
	ForceFulfillmentAttempt *uint64 `json:"ForceFulfillmentAttempt,omitempty"`

	// Used for Keystone Workflows
	WorkflowExecutionID *string `json:"WorkflowExecutionID,omitempty"`

	// Used only for forwarded txs, tracks the original destination address.
	// When this is set, it indicates tx is forwarded through To address.
	FwdrDestAddress *ADDR `json:"ForwarderDestAddress,omitempty"`

	// MessageIDs is used by CCIP for tx to executed messages correlation in logs
	MessageIDs []string `json:"MessageIDs,omitempty"`
	// SeqNumbers is used by CCIP for tx to committed sequence numbers correlation in logs
	SeqNumbers []uint64 `json:"SeqNumbers,omitempty"`
}

TxMeta contains fields of the transaction metadata Not all fields are guaranteed to be present

type TxRequest added in v2.3.0

type TxRequest[ADDR types.Hashable, TX_HASH types.Hashable] struct {
	// IdempotencyKey is a globally unique ID set by the caller, to prevent accidental creation of duplicated Txs during retries or crash recovery.
	// If this field is set, the TXM will first search existing Txs with this field.
	// If found, it will return the existing Tx, without creating a new one. TXM will not validate or ensure that existing Tx is same as the incoming TxRequest.
	// If not found, TXM will create a new Tx.
	// If IdempotencyKey is set to null, TXM will always create a new Tx.
	// Since IdempotencyKey has to be globally unique, consider prepending the service or component's name it is being used by
	// Such as {service}-{ID}. E.g vrf-12345
	IdempotencyKey   *string
	FromAddress      ADDR
	ToAddress        ADDR
	EncodedPayload   []byte
	Value            big.Int
	FeeLimit         uint64
	Meta             *TxMeta[ADDR, TX_HASH]
	ForwarderAddress ADDR

	// Pipeline variables - if you aren't calling this from chain tx task within
	// the pipeline, you don't need these variables
	MinConfirmations  clnull.Uint32
	PipelineTaskRunID *uuid.UUID

	Strategy TxStrategy

	// Checker defines the check that should be run before a transaction is submitted on chain.
	Checker TransmitCheckerSpec[ADDR]

	// Mark tx requiring callback
	SignalCallback bool
}

type TxState added in v2.2.0

type TxState string

type TxStore added in v2.1.0

type TxStore[

	ADDR types.Hashable,

	CHAIN_ID types.ID,

	TX_HASH types.Hashable,

	BLOCK_HASH types.Hashable,

	R ChainReceipt[TX_HASH, BLOCK_HASH],

	SEQ types.Sequence,

	FEE feetypes.Fee,
] interface {
	UnstartedTxQueuePruner
	TxHistoryReaper[CHAIN_ID]
	TransactionStore[ADDR, CHAIN_ID, TX_HASH, BLOCK_HASH, SEQ, FEE]

	// Find confirmed txes beyond the minConfirmations param that require callback but have not yet been signaled
	FindTxesPendingCallback(ctx context.Context, blockNum int64, chainID CHAIN_ID) (receiptsPlus []ReceiptPlus[R], err error)
	// Update tx to mark that its callback has been signaled
	UpdateTxCallbackCompleted(ctx context.Context, pipelineTaskRunRid uuid.UUID, chainId CHAIN_ID) error
	SaveFetchedReceipts(ctx context.Context, receipts []R, chainID CHAIN_ID) (err error)

	// additional methods for tx store management
	CheckTxQueueCapacity(ctx context.Context, fromAddress ADDR, maxQueuedTransactions uint64, chainID CHAIN_ID) (err error)
	Close()
	Abandon(ctx context.Context, id CHAIN_ID, addr ADDR) error
	// Find transactions by a field in the TxMeta blob and transaction states
	FindTxesByMetaFieldAndStates(ctx context.Context, metaField string, metaValue string, states []TxState, chainID *big.Int) (tx []*Tx[CHAIN_ID, ADDR, TX_HASH, BLOCK_HASH, SEQ, FEE], err error)
	// Find transactions with a non-null TxMeta field that was provided by transaction states
	FindTxesWithMetaFieldByStates(ctx context.Context, metaField string, states []TxState, chainID *big.Int) (tx []*Tx[CHAIN_ID, ADDR, TX_HASH, BLOCK_HASH, SEQ, FEE], err error)
	// Find transactions with a non-null TxMeta field that was provided and a receipt block number greater than or equal to the one provided
	FindTxesWithMetaFieldByReceiptBlockNum(ctx context.Context, metaField string, blockNum int64, chainID *big.Int) (tx []*Tx[CHAIN_ID, ADDR, TX_HASH, BLOCK_HASH, SEQ, FEE], err error)
	// Find transactions loaded with transaction attempts and receipts by transaction IDs and states
	FindTxesWithAttemptsAndReceiptsByIdsAndState(ctx context.Context, ids []big.Int, states []TxState, chainID *big.Int) (tx []*Tx[CHAIN_ID, ADDR, TX_HASH, BLOCK_HASH, SEQ, FEE], err error)
}

TxStore is a superset of all the needed persistence layer methods

type TxStrategy

type TxStrategy interface {
	// Subject will be saved txes.subject if not null
	Subject() uuid.NullUUID
	// PruneQueue is called after tx insertion
	// It accepts the service responsible for deleting
	// unstarted txs and deletion options
	PruneQueue(ctx context.Context, pruneService UnstartedTxQueuePruner) (ids []int64, err error)
}

TxStrategy controls how txes are queued and sent

type TxmClient added in v2.2.0

type TxmClient[
	CHAIN_ID types.ID,
	ADDR types.Hashable,
	TX_HASH types.Hashable,
	BLOCK_HASH types.Hashable,
	R ChainReceipt[TX_HASH, BLOCK_HASH],
	SEQ types.Sequence,
	FEE feetypes.Fee,
] interface {
	ChainClient[CHAIN_ID, ADDR, SEQ]
	TransactionClient[CHAIN_ID, ADDR, TX_HASH, BLOCK_HASH, SEQ, FEE]

	// receipt fetching used by confirmer
	BatchGetReceipts(
		ctx context.Context,
		attempts []TxAttempt[CHAIN_ID, ADDR, TX_HASH, BLOCK_HASH, SEQ, FEE],
	) (txReceipt []R, txErr []error, err error)
}

TxmClient is a superset of all the methods needed for the txm

type UnstartedTxQueuePruner

type UnstartedTxQueuePruner interface {
	PruneUnstartedTxQueue(ctx context.Context, queueSize uint32, subject uuid.UUID) (ids []int64, err error)
}

Directories

Path Synopsis

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL