flags

Documentation

Index

• Constants
• Variables
• func CheckRequired(ctx *cli.Context) error

Constants

const EnvVarPrefix = "OP_NODE"

Variables

var (
	/* Required Flags */
	L1NodeAddr = &cli.StringFlag{
		Name:    "l1",
		Usage:   "Address of L1 User JSON-RPC endpoint to use (eth namespace required)",
		Value:   "http://127.0.0.1:8545",
		EnvVars: prefixEnvVars("L1_ETH_RPC"),
	}
	L2EngineAddr = &cli.StringFlag{
		Name:    "l2",
		Usage:   "Address of L2 Engine JSON-RPC endpoints to use (engine and eth namespace required)",
		EnvVars: prefixEnvVars("L2_ENGINE_RPC"),
	}
	RollupConfig = &cli.StringFlag{
		Name:    "rollup.config",
		Usage:   "Rollup chain parameters",
		EnvVars: prefixEnvVars("ROLLUP_CONFIG"),
	}
	Network = &cli.StringFlag{
		Name:    "network",
		Usage:   fmt.Sprintf("Predefined network selection. Available networks: %s", strings.Join(chaincfg.AvailableNetworks(), ", ")),
		EnvVars: prefixEnvVars("NETWORK"),
	}
	/* Optional Flags */
	RPCListenAddr = &cli.StringFlag{
		Name:    "rpc.addr",
		Usage:   "RPC listening address",
		EnvVars: prefixEnvVars("RPC_ADDR"),
		Value:   "127.0.0.1",
	}
	RPCListenPort = &cli.IntFlag{
		Name:    "rpc.port",
		Usage:   "RPC listening port",
		EnvVars: prefixEnvVars("RPC_PORT"),
		Value:   9545,
	}
	RPCEnableAdmin = &cli.BoolFlag{
		Name:    "rpc.enable-admin",
		Usage:   "Enable the admin API (experimental)",
		EnvVars: prefixEnvVars("RPC_ENABLE_ADMIN"),
	}
	RPCAdminPersistence = &cli.StringFlag{
		Name:    "rpc.admin-state",
		Usage:   "File path used to persist state changes made via the admin API so they persist across restarts. Disabled if not set.",
		EnvVars: prefixEnvVars("RPC_ADMIN_STATE"),
	}
	L1TrustRPC = &cli.BoolFlag{
		Name:    "l1.trustrpc",
		Usage:   "Trust the L1 RPC, sync faster at risk of malicious/buggy RPC providing bad or inconsistent L1 data",
		EnvVars: prefixEnvVars("L1_TRUST_RPC"),
	}
	L1RPCProviderKind = &cli.GenericFlag{
		Name: "l1.rpckind",
		Usage: "The kind of RPC provider, used to inform optimal transactions receipts fetching, and thus reduce costs. Valid options: " +
			openum.EnumString(sources.RPCProviderKinds),
		EnvVars: prefixEnvVars("L1_RPC_KIND"),
		Value: func() *sources.RPCProviderKind {
			out := sources.RPCKindBasic
			return &out
		}(),
	}
	L1RPCRateLimit = &cli.Float64Flag{
		Name:    "l1.rpc-rate-limit",
		Usage:   "Optional self-imposed global rate-limit on L1 RPC requests, specified in requests / second. Disabled if set to 0.",
		EnvVars: prefixEnvVars("L1_RPC_RATE_LIMIT"),
		Value:   0,
	}
	L1RPCMaxBatchSize = &cli.IntFlag{
		Name:    "l1.rpc-max-batch-size",
		Usage:   "Maximum number of RPC requests to bundle, e.g. during L1 blocks receipt fetching. The L1 RPC rate limit counts this as N items, but allows it to burst at once.",
		EnvVars: prefixEnvVars("L1_RPC_MAX_BATCH_SIZE"),
		Value:   20,
	}
	L1HTTPPollInterval = &cli.DurationFlag{
		Name:    "l1.http-poll-interval",
		Usage:   "Polling interval for latest-block subscription when using an HTTP RPC provider. Ignored for other types of RPC endpoints.",
		EnvVars: prefixEnvVars("L1_HTTP_POLL_INTERVAL"),
		Value:   time.Second * 12,
	}
	L2EngineJWTSecret = &cli.StringFlag{
		Name:        "l2.jwt-secret",
		Usage:       "Path to JWT secret key. Keys are 32 bytes, hex encoded in a file. A new key will be generated if left empty.",
		EnvVars:     prefixEnvVars("L2_ENGINE_AUTH"),
		Required:    false,
		Value:       "",
		Destination: new(string),
	}
	VerifierL1Confs = &cli.Uint64Flag{
		Name:     "verifier.l1-confs",
		Usage:    "Number of L1 blocks to keep distance from the L1 head before deriving L2 data from. Reorgs are supported, but may be slow to perform.",
		EnvVars:  prefixEnvVars("VERIFIER_L1_CONFS"),
		Required: false,
		Value:    0,
	}
	SequencerEnabledFlag = &cli.BoolFlag{
		Name:    "sequencer.enabled",
		Usage:   "Enable sequencing of new L2 blocks. A separate batch submitter has to be deployed to publish the data for verifiers.",
		EnvVars: prefixEnvVars("SEQUENCER_ENABLED"),
	}
	SequencerStoppedFlag = &cli.BoolFlag{
		Name:    "sequencer.stopped",
		Usage:   "Initialize the sequencer in a stopped state. The sequencer can be started using the admin_startSequencer RPC",
		EnvVars: prefixEnvVars("SEQUENCER_STOPPED"),
	}
	SequencerMaxSafeLagFlag = &cli.Uint64Flag{
		Name:     "sequencer.max-safe-lag",
		Usage:    "Maximum number of L2 blocks for restricting the distance between L2 safe and unsafe. Disabled if 0.",
		EnvVars:  prefixEnvVars("SEQUENCER_MAX_SAFE_LAG"),
		Required: false,
		Value:    0,
	}
	SequencerL1Confs = &cli.Uint64Flag{
		Name:     "sequencer.l1-confs",
		Usage:    "Number of L1 blocks to keep distance from the L1 head as a sequencer for picking an L1 origin.",
		EnvVars:  prefixEnvVars("SEQUENCER_L1_CONFS"),
		Required: false,
		Value:    4,
	}
	L1EpochPollIntervalFlag = &cli.DurationFlag{
		Name:     "l1.epoch-poll-interval",
		Usage:    "Poll interval for retrieving new L1 epoch updates such as safe and finalized block changes. Disabled if 0 or negative.",
		EnvVars:  prefixEnvVars("L1_EPOCH_POLL_INTERVAL"),
		Required: false,
		Value:    time.Second * 12 * 32,
	}
	MetricsEnabledFlag = &cli.BoolFlag{
		Name:    "metrics.enabled",
		Usage:   "Enable the metrics server",
		EnvVars: prefixEnvVars("METRICS_ENABLED"),
	}
	MetricsAddrFlag = &cli.StringFlag{
		Name:    "metrics.addr",
		Usage:   "Metrics listening address",
		Value:   "0.0.0.0",
		EnvVars: prefixEnvVars("METRICS_ADDR"),
	}
	MetricsPortFlag = &cli.IntFlag{
		Name:    "metrics.port",
		Usage:   "Metrics listening port",
		Value:   7300,
		EnvVars: prefixEnvVars("METRICS_PORT"),
	}
	PprofEnabledFlag = &cli.BoolFlag{
		Name:    "pprof.enabled",
		Usage:   "Enable the pprof server",
		EnvVars: prefixEnvVars("PPROF_ENABLED"),
	}
	PprofAddrFlag = &cli.StringFlag{
		Name:    "pprof.addr",
		Usage:   "pprof listening address",
		Value:   "0.0.0.0",
		EnvVars: prefixEnvVars("PPROF_ADDR"),
	}
	PprofPortFlag = &cli.IntFlag{
		Name:    "pprof.port",
		Usage:   "pprof listening port",
		Value:   6060,
		EnvVars: prefixEnvVars("PPROF_PORT"),
	}
	SnapshotLog = &cli.StringFlag{
		Name:    "snapshotlog.file",
		Usage:   "Path to the snapshot log file",
		EnvVars: prefixEnvVars("SNAPSHOT_LOG"),
	}
	HeartbeatEnabledFlag = &cli.BoolFlag{
		Name:    "heartbeat.enabled",
		Usage:   "Enables or disables heartbeating",
		EnvVars: prefixEnvVars("HEARTBEAT_ENABLED"),
	}
	HeartbeatMonikerFlag = &cli.StringFlag{
		Name:    "heartbeat.moniker",
		Usage:   "Sets a moniker for this node",
		EnvVars: prefixEnvVars("HEARTBEAT_MONIKER"),
	}
	HeartbeatURLFlag = &cli.StringFlag{
		Name:    "heartbeat.url",
		Usage:   "Sets the URL to heartbeat to",
		EnvVars: prefixEnvVars("HEARTBEAT_URL"),
		Value:   "https://heartbeat.optimism.io",
	}
	BackupL2UnsafeSyncRPC = &cli.StringFlag{
		Name:     "l2.backup-unsafe-sync-rpc",
		Usage:    "Set the backup L2 unsafe sync RPC endpoint.",
		EnvVars:  prefixEnvVars("L2_BACKUP_UNSAFE_SYNC_RPC"),
		Required: false,
	}
	BackupL2UnsafeSyncRPCTrustRPC = &cli.StringFlag{
		Name: "l2.backup-unsafe-sync-rpc.trustrpc",
		Usage: "Like l1.trustrpc, configure if response data from the RPC needs to be verified, e.g. blockhash computation." +
			"This does not include checks if the blockhash is part of the canonical chain.",
		EnvVars:  prefixEnvVars("L2_BACKUP_UNSAFE_SYNC_RPC_TRUST_RPC"),
		Required: false,
	}
)

var (
	DisableP2P = &cli.BoolFlag{
		Name:     "p2p.disable",
		Usage:    "Completely disable the P2P stack",
		Required: false,
		EnvVars:  p2pEnv("DISABLE"),
	}
	NoDiscovery = &cli.BoolFlag{
		Name:     "p2p.no-discovery",
		Usage:    "Disable Discv5 (node discovery)",
		Required: false,
		EnvVars:  p2pEnv("NO_DISCOVERY"),
	}
	Scoring = &cli.StringFlag{
		Name:     "p2p.scoring",
		Usage:    "Sets the peer scoring strategy for the P2P stack. Can be one of: none or light.",
		Required: false,
		EnvVars:  p2pEnv("PEER_SCORING"),
	}
	PeerScoring = &cli.StringFlag{
		Name:     "p2p.scoring.peers",
		Usage:    fmt.Sprintf("Deprecated: Use %v instead", Scoring.Name),
		Required: false,
		Hidden:   true,
	}
	PeerScoreBands = &cli.StringFlag{
		Name:     "p2p.score.bands",
		Usage:    "Deprecated. This option is ignored and is only present for backwards compatibility.",
		Required: false,
		Value:    "",
		Hidden:   true,
	}

	// Banning Flag - whether or not we want to act on the scoring
	Banning = &cli.BoolFlag{
		Name:     "p2p.ban.peers",
		Usage:    "Enables peer banning. This should ONLY be enabled once certain peer scoring is working correctly.",
		Required: false,
		EnvVars:  p2pEnv("PEER_BANNING"),
	}
	BanningThreshold = &cli.Float64Flag{
		Name:     "p2p.ban.threshold",
		Usage:    "The minimum score below which peers are disconnected and banned.",
		Required: false,
		Value:    -100,
		EnvVars:  p2pEnv("PEER_BANNING_THRESHOLD"),
	}
	BanningDuration = &cli.DurationFlag{
		Name:     "p2p.ban.duration",
		Usage:    "The duration that peers are banned for.",
		Required: false,
		Value:    1 * time.Hour,
		EnvVars:  p2pEnv("PEER_BANNING_DURATION"),
	}

	TopicScoring = &cli.StringFlag{
		Name:     "p2p.scoring.topics",
		Usage:    fmt.Sprintf("Deprecated: Use %v instead", Scoring.Name),
		Required: false,
		Hidden:   true,
	}
	P2PPrivPath = &cli.StringFlag{
		Name: "p2p.priv.path",
		Usage: "Read the hex-encoded 32-byte private key for the peer ID from this txt file. Created if not already exists." +
			"Important to persist to keep the same network identity after restarting, maintaining the previous advertised identity.",
		Required:  false,
		Value:     "opnode_p2p_priv.txt",
		EnvVars:   p2pEnv("PRIV_PATH"),
		TakesFile: true,
	}
	P2PPrivRaw = &cli.StringFlag{

		Name:     "p2p.priv.raw",
		Usage:    "The hex-encoded 32-byte private key for the peer ID",
		Required: false,
		Hidden:   true,
		Value:    "",
		EnvVars:  p2pEnv("PRIV_RAW"),
	}
	ListenIP = &cli.StringFlag{
		Name:     "p2p.listen.ip",
		Usage:    "IP to bind LibP2P and Discv5 to",
		Required: false,
		Value:    "0.0.0.0",
		EnvVars:  p2pEnv("LISTEN_IP"),
	}
	ListenTCPPort = &cli.UintFlag{
		Name:     "p2p.listen.tcp",
		Usage:    "TCP port to bind LibP2P to. Any available system port if set to 0.",
		Required: false,
		Value:    9222,
		EnvVars:  p2pEnv("LISTEN_TCP_PORT"),
	}
	ListenUDPPort = &cli.UintFlag{
		Name:     "p2p.listen.udp",
		Usage:    "UDP port to bind Discv5 to. Same as TCP port if left 0.",
		Required: false,
		Value:    0,
		EnvVars:  p2pEnv("LISTEN_UDP_PORT"),
	}
	AdvertiseIP = &cli.StringFlag{
		Name:     "p2p.advertise.ip",
		Usage:    "The IP address to advertise in Discv5, put into the ENR of the node. This may also be a hostname / domain name to resolve to an IP.",
		Required: false,

		Value:   "",
		EnvVars: p2pEnv("ADVERTISE_IP"),
	}
	AdvertiseTCPPort = &cli.UintFlag{
		Name:     "p2p.advertise.tcp",
		Usage:    "The TCP port to advertise in Discv5, put into the ENR of the node. Set to p2p.listen.tcp value if 0.",
		Required: false,
		Value:    0,
		EnvVars:  p2pEnv("ADVERTISE_TCP"),
	}
	AdvertiseUDPPort = &cli.UintFlag{
		Name:     "p2p.advertise.udp",
		Usage:    "The UDP port to advertise in Discv5 as fallback if not determined by Discv5, put into the ENR of the node. Set to p2p.listen.udp value if 0.",
		Required: false,
		Value:    0,
		EnvVars:  p2pEnv("ADVERTISE_UDP"),
	}
	Bootnodes = &cli.StringFlag{
		Name:     "p2p.bootnodes",
		Usage:    "Comma-separated base64-format ENR list. Bootnodes to start discovering other node records from.",
		Required: false,
		Value:    "",
		EnvVars:  p2pEnv("BOOTNODES"),
	}
	StaticPeers = &cli.StringFlag{
		Name:     "p2p.static",
		Usage:    "Comma-separated multiaddr-format peer list. Static connections to make and maintain, these peers will be regarded as trusted.",
		Required: false,
		Value:    "",
		EnvVars:  p2pEnv("STATIC"),
	}
	HostMux = &cli.StringFlag{
		Name:     "p2p.mux",
		Usage:    "Comma-separated list of multiplexing protocols in order of preference. At least 1 required. Options: 'yamux','mplex'.",
		Hidden:   true,
		Required: false,
		Value:    "yamux,mplex",
		EnvVars:  p2pEnv("MUX"),
	}
	HostSecurity = &cli.StringFlag{
		Name:     "p2p.security",
		Usage:    "Comma-separated list of transport security protocols in order of preference. At least 1 required. Options: 'noise','tls'. Set to 'none' to disable.",
		Hidden:   true,
		Required: false,
		Value:    "noise",
		EnvVars:  p2pEnv("SECURITY"),
	}
	PeersLo = &cli.UintFlag{
		Name:     "p2p.peers.lo",
		Usage:    "Low-tide peer count. The node actively searches for new peer connections if below this amount.",
		Required: false,
		Value:    20,
		EnvVars:  p2pEnv("PEERS_LO"),
	}
	PeersHi = &cli.UintFlag{
		Name:     "p2p.peers.hi",
		Usage:    "High-tide peer count. The node starts pruning peer connections slowly after reaching this number.",
		Required: false,
		Value:    30,
		EnvVars:  p2pEnv("PEERS_HI"),
	}
	PeersGrace = &cli.DurationFlag{
		Name:     "p2p.peers.grace",
		Usage:    "Grace period to keep a newly connected peer around, if it is not misbehaving.",
		Required: false,
		Value:    30 * time.Second,
		EnvVars:  p2pEnv("PEERS_GRACE"),
	}
	NAT = &cli.BoolFlag{
		Name:     "p2p.nat",
		Usage:    "Enable NAT traversal with PMP/UPNP devices to learn external IP.",
		Required: false,
		EnvVars:  p2pEnv("NAT"),
	}
	UserAgent = &cli.StringFlag{
		Name:     "p2p.useragent",
		Usage:    "User-agent string to share via LibP2P identify. If empty it defaults to 'slice'.",
		Hidden:   true,
		Required: false,
		Value:    "slice",
		EnvVars:  p2pEnv("AGENT"),
	}
	TimeoutNegotiation = &cli.DurationFlag{
		Name:     "p2p.timeout.negotiation",
		Usage:    "Negotiation timeout, time for new peer connections to share their their supported p2p protocols",
		Hidden:   true,
		Required: false,
		Value:    10 * time.Second,
		EnvVars:  p2pEnv("TIMEOUT_NEGOTIATION"),
	}
	TimeoutAccept = &cli.DurationFlag{
		Name:     "p2p.timeout.accept",
		Usage:    "Accept timeout, time for connection to be accepted.",
		Hidden:   true,
		Required: false,
		Value:    10 * time.Second,
		EnvVars:  p2pEnv("TIMEOUT_ACCEPT"),
	}
	TimeoutDial = &cli.DurationFlag{
		Name:     "p2p.timeout.dial",
		Usage:    "Dial timeout for outgoing connection requests",
		Hidden:   true,
		Required: false,
		Value:    10 * time.Second,
		EnvVars:  p2pEnv("TIMEOUT_DIAL"),
	}
	PeerstorePath = &cli.StringFlag{
		Name: "p2p.peerstore.path",
		Usage: "Peerstore database location. Persisted peerstores help recover peers after restarts. " +
			"Set to 'memory' to never persist the peerstore. Peerstore records will be pruned / expire as necessary. " +
			"Warning: a copy of the priv network key of the local peer will be persisted here.",
		Required:  false,
		TakesFile: true,
		Value:     "opnode_peerstore_db",
		EnvVars:   p2pEnv("PEERSTORE_PATH"),
	}
	DiscoveryPath = &cli.StringFlag{
		Name:      "p2p.discovery.path",
		Usage:     "Discovered ENRs are persisted in a database to recover from a restart without having to bootstrap the discovery process again. Set to 'memory' to never persist the peerstore.",
		Required:  false,
		TakesFile: true,
		Value:     "opnode_discovery_db",
		EnvVars:   p2pEnv("DISCOVERY_PATH"),
	}
	SequencerP2PKeyFlag = &cli.StringFlag{
		Name:     "p2p.sequencer.key",
		Usage:    "Hex-encoded private key for signing off on p2p application messages as sequencer.",
		Required: false,
		Value:    "",
		EnvVars:  p2pEnv("SEQUENCER_KEY"),
	}
	GossipMeshDFlag = &cli.UintFlag{
		Name:     "p2p.gossip.mesh.d",
		Usage:    "Configure GossipSub topic stable mesh target count, a.k.a. desired outbound degree, number of peers to gossip to",
		Required: false,
		Hidden:   true,
		Value:    p2p.DefaultMeshD,
		EnvVars:  p2pEnv("GOSSIP_MESH_D"),
	}
	GossipMeshDloFlag = &cli.UintFlag{
		Name:     "p2p.gossip.mesh.lo",
		Usage:    "Configure GossipSub topic stable mesh low watermark, a.k.a. lower bound of outbound degree",
		Required: false,
		Hidden:   true,
		Value:    p2p.DefaultMeshDlo,
		EnvVars:  p2pEnv("GOSSIP_MESH_DLO"),
	}
	GossipMeshDhiFlag = &cli.UintFlag{
		Name:     "p2p.gossip.mesh.dhi",
		Usage:    "Configure GossipSub topic stable mesh high watermark, a.k.a. upper bound of outbound degree, additional peers will not receive gossip",
		Required: false,
		Hidden:   true,
		Value:    p2p.DefaultMeshDhi,
		EnvVars:  p2pEnv("GOSSIP_MESH_DHI"),
	}
	GossipMeshDlazyFlag = &cli.UintFlag{
		Name:     "p2p.gossip.mesh.dlazy",
		Usage:    "Configure GossipSub gossip target, a.k.a. target degree for gossip only (not messaging like p2p.gossip.mesh.d, just announcements of IHAVE",
		Required: false,
		Hidden:   true,
		Value:    p2p.DefaultMeshDlazy,
		EnvVars:  p2pEnv("GOSSIP_MESH_DLAZY"),
	}
	GossipFloodPublishFlag = &cli.BoolFlag{
		Name:     "p2p.gossip.mesh.floodpublish",
		Usage:    "Configure GossipSub to publish messages to all known peers on the topic, outside of the mesh, also see Dlazy as less aggressive alternative.",
		Required: false,
		Hidden:   true,
		EnvVars:  p2pEnv("GOSSIP_FLOOD_PUBLISH"),
	}
	SyncReqRespFlag = &cli.BoolFlag{
		Name:     "p2p.sync.req-resp",
		Usage:    "Enables experimental P2P req-resp alternative sync method, on both server and client side.",
		Required: false,
		EnvVars:  p2pEnv("SYNC_REQ_RESP"),
	}
)

var Flags []cli.Flag

Flags contains the list of configuration options available to the binary.

Functions

func CheckRequired

func CheckRequired(ctx *cli.Context) error