my-minishift

command module
v0.4.1 Latest Latest
Warning

This package is not in the latest version of its module.

Go to latest
Published: Aug 24, 2016 License: Apache-2.0 Imports: 2 Imported by: 0

README

Minishift

Build Status

What is Minishift?

Minishift is a tool that makes it easy to run OpenShift locally. Minishift runs a single-node OpenShift cluster inside a VM on your laptop for users looking to try out OpenShift or develop with it day-to-day.

Features
  • Minishift packages and configures a Linux VM, Docker and all OpenShift components, optimized for local development.
  • Minishift supports OpenShift features such as:
    • DNS
    • NodePorts
    • ConfigMaps and Secrets
    • Console

Installation

Requirements
Instructions

See the installation instructions for the latest release.

Quickstart

Here's a brief demo of minishift usage. If you want to change the VM driver add the appropriate --vm-driver=xxx flag to minishift start. Minishift Supports the following drivers:

Note that the IP below is dynamic and can change. It can be retrieved with minishift ip.

$ minishift start
Starting local OpenShift cluster...
Running pre-create checks...
Creating machine...
Starting local OpenShift cluster...
OpenShift is available at https://192.168.99.100:8443.

$ oc run hello-minishift --image=gcr.io/google_containers/echoserver:1.4 --port=8080 --expose --service-overrides='{"apiVersion": "v1", "spec": {"type": "NodePort"}}'
service "hello-minishift" created
deploymentconfig "hello-minishift" created

# We have now launched an echoserver pod but we have to wait until the pod is up before curling/accessing it
# via the exposed service.
# To check whether the pod is up and running we can use the following:
$ oc get pod
NAME                              READY     STATUS              RESTARTS   AGE
hello-minishift-3383150820-vctvh   1/1       ContainerCreating   0          3s

# We can see that the pod is still being created from the ContainerCreating status
$ oc get pod
NAME                              READY     STATUS    RESTARTS   AGE
hello-minishift-3383150820-vctvh   1/1       Running   0          13s

# We can see that the pod is now Running and we will now be able to curl it:
$ curl $(minishift service hello-minishift --url)
CLIENT VALUES:
client_address=192.168.99.1
command=GET
real path=/
...

$ minishift stop
Stopping local OpenShift cluster...
Stopping "minishiftVM"...
Driver plugins

See DRIVERS for details on supported drivers and how to install plugins, if required.

Reusing the Docker daemon

When using a single VM of OpenShift its really handy to reuse the Docker daemon inside the VM; as this means you don't have to build on your host machine and push the image into a docker registry - you can just build inside the same docker daemon as minishift which speeds up local experiments.

To be able to work with the docker daemon on your mac/linux host use the docker-env command in your shell:

eval $(minishift docker-env)

you should now be able to use docker on the command line on your host mac/linux machine talking to the docker daemon inside the minishift VM:

docker ps

Managing your Cluster

Starting a Cluster

The minishift start command can be used to start your cluster. This command creates and configures a virtual machine that runs a single-node Kubernetes cluster. This command also configures your oc installation to communicate with this cluster.

Stopping a Cluster

The minishift stop command can be used to stop your cluster. This command shuts down the minishift virtual machine, but preserves all cluster state and data. Starting the cluster again will restore it to it's previous state.

Deleting a Cluster

The minishift delete command can be used to delete your cluster. This command shuts down and deletes the minishift virtual machine. No data or state is preserved.

Interacting With your Cluster

oc

The minishift start command creates a "oc context" called "minishift". This context contains the configuration to communicate with your minishift cluster.

Minishift sets this context to default automatically, but if you need to switch back to it in the future, run:

oc config set-context minishift,

or pass the context on each command like this: oc get pods --context=minishift.

Console

To access the OpenShift console, run this command in a shell after starting minishift to get the address:

minishift console
Services

To access a service exposed via a node port, run this command in a shell after starting minishift to get the address:

minishift service [-n NAMESPACE] [--url] NAME

Networking

The minishift VM is exposed to the host system via a host-only IP address, that can be obtained with the minishift ip command. Any services of type NodePort can be accessed over that IP address, on the NodePort.

To determine the NodePort for your service, you can use a kubectl command like this:

kubectl get service $SERVICE --output='jsonpath="{.spec.ports[0].NodePort}"'

Persistent Volumes

Minishift supports PersistentVolumes of type hostPath. These PersistentVolumes are mapped to a directory inside the minishift VM.

The MiniShift VM boots into a tmpfs, so most directories will not be persisted across reboots (minishift stop). However, MiniShift is configured to persist files stored under the following host directories:

  • /data
  • /var/lib/minishift
  • /var/lib/docker

Here is an example PersistentVolume config to persist data in the '/data' directory:

apiVersion: v1
kind: PersistentVolume
metadata:
  name: pv0001
spec:
  accessModes:
    - ReadWriteOnce
  capacity:
    storage: 5Gi
  hostPath:
    path: /data/pv0001/

Private Container Registries

To access a private container registry, follow the steps on this page.

We recommend you use ImagePullSecrets, but if you would like to configure access on the minishift VM you can place the .dockercfg in the /home/docker directory or the config.json in the /home/docker/.docker directory.

Documentation

For a list of minishift's available commands see the full CLI docs.

Known Issues

  • Features that require a Cloud Provider will not work in Minishift. These include:
    • LoadBalancers
    • PersistentVolumes
    • Ingress
  • Features that require multiple nodes. These include:
    • Advanced scheduling policies
  • Alternate runtimes, like rkt.

Design

Minishift uses libmachine for provisioning VMs, and OpenShift Origin for running the cluster.

Goals and Non-Goals

For the goals and non-goals of the minishift project, please see our roadmap.

Development Guide

See CONTRIBUTING.md for an overview of how to send pull requests.

Build Requirements
  • A recent Go distribution (>1.6)
  • If you're not on Linux, you'll need a Docker installation
  • Minishift requires at least 4GB of RAM to compile, which can be problematic when using docker-machine
Build Instructions
make
Run Instructions

Start the cluster using your built minishift with:

$ ./out/minishift start
Running Tests
Unit Tests

Unit tests are run on Travis before code is merged. To run as part of a development cycle:

make test
Integration Tests

Integration tests are currently run manually. To run them, build the binary and run the tests:

make integration
Conformance Tests

These are kubernetes tests that run against an arbitrary cluster and exercise a wide range of kubernetes features. You can run these against minishift by following these steps:

  • Clone the kubernetes repo somewhere on your system.
  • Run make quick-release in the k8s repo.
  • Start up a minishift cluster with: minishift start.
  • Set these two environment variables:
export KUBECONFIG=$HOME/.kube/config
export KUBERNETES_CONFORMANCE_TEST=y
  • Run the tests (from the k8s repo):
go run hack/e2e.go -v --test --test_args="--ginkgo.focus=\[Conformance\]" --check_version_skew=false --check_node_count=false

To run a specific Conformance Test, you can use the ginkgo.focus flag to filter the set using a regular expression. The hack/e2e.go wrapper and the e2e.sh wrappers have a little trouble with quoting spaces though, so use the \s regular expression character instead. For example, to run the test should update annotations on modification [Conformance], use this command:

go run hack/e2e.go -v --test --test_args="--ginkgo.focus=should\supdate\sannotations\son\smodification" --check_version_skew=false --check_node_count=false
Adding a New Dependency

Minishift uses Godep to manage vendored dependencies. Godep can be a bit finnicky with a project with this many dependencies. Here is a rough set of steps that usually works to add a new dependency.

  1. Make a clean GOPATH, with minishift in it. This isn't strictly necessary, but it usually helps.
mkdir -p $HOME/newgopath/src/k8s.io
export GOPATH=$HOME/newgopath
cd $HOME/newgopath/src/k8s.io
git clone https://github.com/kubernetes/minishift.git
  1. go get your new dependency.
go get mynewdepenency
  1. Use it in code, build and test.

  2. Import the dependency from GOPATH into vendor/

godep save ./...

If it is a large dependency, please commit the vendor/ directory changes separately. This makes review easier in Github.

git add vendor/
git commit -m "Adding dependency foo"
git add --all
git commit -m "Adding cool feature"
Updating Kubernetes

To update Kubernetes, follow these steps:

  1. Make a clean GOPATH, with minishift in it. This isn't strictly necessary, but it usually helps.
mkdir -p $HOME/newgopath/src/k8s.io
export GOPATH=$HOME/newgopath
cd $HOME/newgopath/src/k8s.io
git clone https://github.com/kubernetes/minishift.git
  1. Copy your vendor directory back out to the new GOPATH.
cd minishift
godep restore ./...
  1. Kubernetes should now be on your GOPATH. Check it out to the right version. Make sure to also fetch tags, as Godep relies on these.
cd $GOPATH/src/k8s.io/kubernetes
git fetch --tags

Then list all available Kubernetes tags:

git tag
...
v1.2.4
v1.2.4-beta.0
v1.3.0-alpha.3
v1.3.0-alpha.4
v1.3.0-alpha.5
...

Then checkout the correct one and update its dependencies with:

git checkout $DESIREDTAG
godep restore ./...
  1. Build and test minishift, making any manual changes necessary to build.

  2. Update godeps

cd $GOPATH/src/github.com/jimmidyson/minishift
rm -rf Godeps/ vendor/
godep save ./...
GOOS=windows godep save ./...
  1. Verify that the correct tag is marked in the Godeps.json file by running this script:
python hack/get_k8s_version.py
-X k8s.io/minishift/vendor/k8s.io/kubernetes/pkg/version.gitCommit=caf9a4d87700ba034a7b39cced19bd5628ca6aa3 -X k8s.io/minishift/vendor/k8s.io/kubernetes/pkg/version.gitVersion=v1.3.0-beta.2 -X k8s.io/minishift/vendor/k8s.io/kubernetes/pkg/version.gitTreeState=clean

The -X k8s.io/minishift/vendor/k8s.io/kubernetes/pkg/version.gitVersion flag should contain the right tag.

Once you've build and started minishift, you can also run:

oc version
Client Version: version.Info{Major:"1", Minor:"2", GitVersion:"v1.2.4", GitCommit:"3eed1e3be6848b877ff80a93da3785d9034d0a4f", GitTreeState:"clean"}
Server Version: version.Info{Major:"1", Minor:"3+", GitVersion:"v1.3.0-beta.2", GitCommit:"caf9a4d87700ba034a7b39cced19bd5628ca6aa3", GitTreeState:"clean"}

The Server Version should contain the right tag in version.Info.GitVersion.

If any manual changes were required, please commit the vendor changes separately. This makes the change easier to view in Github.

git add vendor/
git commit -m "Updating Kubernetes to foo"
git add --all
git commit -m "Manual changes to update Kubernetes to foo"

Steps to Release MiniShift

The steps to release minishift can be found at RELEASING.md

Community

Contributions, questions, and comments are all welcomed and encouraged! minishift developers hang out on IRC in the #openshift-dev channel on Freenode.

Documentation

The Go Gopher

There is no documentation for this package.

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL