mempool

package
v0.11.19 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Jan 12, 2024 License: Apache-2.0 Imports: 20 Imported by: 0

Documentation

Index

Constants

View Source 
const (
	MempoolChannel = byte(0x30)

	// PeerCatchupSleepIntervalMS defines how much time to sleep if a peer is behind
	PeerCatchupSleepIntervalMS = 100

	// UnknownPeerID is the peer ID to use when running CheckTx when there is
	// no peer (e.g. RPC)
	UnknownPeerID uint16 = 0

	MaxActiveIDs = math.MaxUint16
)
View Source 
const (
	// MetricsSubsystem is a subsystem shared by all metrics exposed by this
	// package.
	MetricsSubsystem = "mempool"
)

Variables

View Source 
var ErrTxInCache = errors.New("tx already exists in cache")

ErrTxInCache is returned to the client if we saw tx earlier

Functions

func IsPreCheckError 

func IsPreCheckError(err error) bool

IsPreCheckError returns true if err is due to pre check failure.

Types

type CListMempool added in v0.11.2 

type CListMempool struct {
	// contains filtered or unexported fields
}

CListMempool is an ordered in-memory pool for transactions before they are proposed in a consensus round. Transaction validity is checked using the CheckTx abci message before the transaction is added to the pool. The mempool uses a concurrent list structure for storing transactions that can be efficiently accessed by multiple concurrent readers.

func NewCListMempool added in v0.11.2 

func NewCListMempool(
	cfg *config.MempoolConfig,
	proxyAppConn proxy.AppConnMempool,
	height uint64,
	options ...CListMempoolOption,
) *CListMempool

NewCListMempool returns a new mempool with the given configuration and connection to an application.

func (*CListMempool) CheckTx added in v0.11.2 

func (mem *CListMempool) CheckTx(
	tx types.Tx,
	cb func(*abci.ResponseCheckTx),
	txInfo TxInfo,
) error

It blocks if we're waiting on Update() or Reap(). cb: A callback from the CheckTx command. 

It gets called from another goroutine.

CONTRACT: Either cb will get called, or err returned.

Safe for concurrent use by multiple goroutines.

func (*CListMempool) EnableTxsAvailable added in v0.11.2 

func (mem *CListMempool) EnableTxsAvailable()

NOTE: not thread safe - should only be called once, on startup

func (*CListMempool) Flush added in v0.11.2 

func (mem *CListMempool) Flush()

XXX: Unsafe! Calling Flush may leave mempool in inconsistent state.

func (*CListMempool) FlushAppConn added in v0.11.2 

func (mem *CListMempool) FlushAppConn() error

Lock() must be help by the caller during execution.

func (*CListMempool) Lock added in v0.11.2 

func (mem *CListMempool) Lock()

Safe for concurrent use by multiple goroutines.

func (*CListMempool) ReapMaxBytesMaxGas added in v0.11.2 

func (mem *CListMempool) ReapMaxBytesMaxGas(maxBytes, maxGas int64) types.Txs

Safe for concurrent use by multiple goroutines.

func (*CListMempool) ReapMaxTxs added in v0.11.2 

func (mem *CListMempool) ReapMaxTxs(max int) types.Txs

Safe for concurrent use by multiple goroutines.

func (*CListMempool) RemoveTxByKey added in v0.11.2 

func (mem *CListMempool) RemoveTxByKey(txKey types.TxKey) error

RemoveTxByKey removes a transaction from the mempool by its TxKey index.

func (*CListMempool) SetLogger added in v0.11.2 

func (mem *CListMempool) SetLogger(l log.Logger)

SetLogger sets the Logger.

func (*CListMempool) Size added in v0.11.2 

func (mem *CListMempool) Size() int

Safe for concurrent use by multiple goroutines.

func (*CListMempool) SizeBytes added in v0.11.2 

func (mem *CListMempool) SizeBytes() int64

Safe for concurrent use by multiple goroutines.

func (*CListMempool) TxsAvailable added in v0.11.2 

func (mem *CListMempool) TxsAvailable() <-chan struct{}

Safe for concurrent use by multiple goroutines.

func (*CListMempool) TxsFront added in v0.11.2 

func (mem *CListMempool) TxsFront() *clist.CElement

TxsFront returns the first transaction in the ordered list for peer goroutines to call .NextWait() on. FIXME: leaking implementation details!

Safe for concurrent use by multiple goroutines.

func (*CListMempool) TxsWaitChan added in v0.11.2 

func (mem *CListMempool) TxsWaitChan() <-chan struct{}

TxsWaitChan returns a channel to wait on transactions. It will be closed once the mempool is not empty (ie. the internal `mem.txs` has at least one element)

Safe for concurrent use by multiple goroutines.

func (*CListMempool) Unlock added in v0.11.2 

func (mem *CListMempool) Unlock()

Safe for concurrent use by multiple goroutines.

func (*CListMempool) Update added in v0.11.2 

func (mem *CListMempool) Update(
	height uint64,
	txs types.Txs,
	txResults []*abci.ExecTxResult,
	preCheck PreCheckFunc,
	postCheck PostCheckFunc,
) error

Lock() must be help by the caller during execution.

type CListMempoolOption added in v0.11.2 

type CListMempoolOption func(*CListMempool)

CListMempoolOption sets an optional parameter on the mempool.

func WithMetrics added in v0.11.2 

func WithMetrics(metrics *Metrics) CListMempoolOption

WithMetrics sets the metrics.

func WithPostCheck added in v0.11.2 

func WithPostCheck(f PostCheckFunc) CListMempoolOption

WithPostCheck sets a filter for the mempool to reject a tx if f(tx) returns false. This is ran after CheckTx. Only applies to the first created block. After that, Update overwrites the existing value.

func WithPreCheck added in v0.11.2 

func WithPreCheck(f PreCheckFunc) CListMempoolOption

WithPreCheck sets a filter for the mempool to reject a tx if f(tx) returns false. This is ran before CheckTx. Only applies to the first created block. After that, Update overwrites the existing value.

type ErrMempoolIsFull 

type ErrMempoolIsFull struct {
	NumTxs      int
	MaxTxs      int
	TxsBytes    int64
	MaxTxsBytes int64
}

ErrMempoolIsFull defines an error where CometBFT and the application cannot handle that much load.

func (ErrMempoolIsFull) Error 

func (e ErrMempoolIsFull) Error() string

type ErrPreCheck 

type ErrPreCheck struct {
	Reason error
}

ErrPreCheck defines an error where a transaction fails a pre-check.

func (ErrPreCheck) Error 

func (e ErrPreCheck) Error() string

type ErrTxTooLarge 

type ErrTxTooLarge struct {
	Max    int
	Actual int
}

ErrTxTooLarge defines an error when a transaction is too big to be sent in a message to other peers.

func (ErrTxTooLarge) Error 

func (e ErrTxTooLarge) Error() string

type LRUTxCache 

type LRUTxCache struct {
	// contains filtered or unexported fields
}

LRUTxCache maintains a thread-safe LRU cache of raw transactions. The cache only stores the hash of the raw transaction.

func NewLRUTxCache 

func NewLRUTxCache(cacheSize int) *LRUTxCache

func (*LRUTxCache) GetList 

func (c *LRUTxCache) GetList() *list.List

GetList returns the underlying linked-list that backs the LRU cache. Note, this should be used for testing purposes only!

func (*LRUTxCache) Has 

func (c *LRUTxCache) Has(tx types.Tx) bool

func (*LRUTxCache) Push 

func (c *LRUTxCache) Push(tx types.Tx) bool

func (*LRUTxCache) Remove 

func (c *LRUTxCache) Remove(tx types.Tx)

func (*LRUTxCache) Reset 

func (c *LRUTxCache) Reset()

type Mempool 

type Mempool interface {
	// CheckTx executes a new transaction against the application to determine
	// its validity and whether it should be added to the mempool.
	CheckTx(tx types.Tx, callback func(*abci.ResponseCheckTx), txInfo TxInfo) error

	// RemoveTxByKey removes a transaction, identified by its key,
	// from the mempool.
	RemoveTxByKey(txKey types.TxKey) error

	// ReapMaxBytesMaxGas reaps transactions from the mempool up to maxBytes
	// bytes total with the condition that the total gasWanted must be less than
	// maxGas.
	//
	// If both maxes are negative, there is no cap on the size of all returned
	// transactions (~ all available transactions).
	ReapMaxBytesMaxGas(maxBytes, maxGas int64) types.Txs

	// ReapMaxTxs reaps up to max transactions from the mempool. If max is
	// negative, there is no cap on the size of all returned transactions
	// (~ all available transactions).
	ReapMaxTxs(max int) types.Txs

	// Lock locks the mempool. The consensus must be able to hold lock to safely
	// update.
	Lock()

	// Unlock unlocks the mempool.
	Unlock()

	// Update informs the mempool that the given txs were committed and can be
	// discarded.
	//
	// NOTE:
	// 1. This should be called *after* block is committed by consensus.
	// 2. Lock/Unlock must be managed by the caller.
	Update(
		blockHeight uint64,
		blockTxs types.Txs,
		deliverTxResponses []*abci.ExecTxResult,
		newPreFn PreCheckFunc,
		newPostFn PostCheckFunc,
	) error

	// FlushAppConn flushes the mempool connection to ensure async callback calls
	// are done, e.g. from CheckTx.
	//
	// NOTE:
	// 1. Lock/Unlock must be managed by caller.
	FlushAppConn() error

	// Flush removes all transactions from the mempool and caches.
	Flush()

	// TxsAvailable returns a channel which fires once for every height, and only
	// when transactions are available in the mempool.
	//
	// NOTE:
	// 1. The returned channel may be nil if EnableTxsAvailable was not called.
	TxsAvailable() <-chan struct{}

	// EnableTxsAvailable initializes the TxsAvailable channel, ensuring it will
	// trigger once every height when transactions are available.
	EnableTxsAvailable()

	// Size returns the number of transactions in the mempool.
	Size() int

	// SizeBytes returns the total size of all txs in the mempool.
	SizeBytes() int64
}

Mempool defines the mempool interface.

Updates to the mempool need to be synchronized with committing a block so applications can reset their transient state on Commit.

type Metrics 

type Metrics struct {
	// Size of the mempool.
	Size metrics.Gauge

	// Histogram of transaction sizes, in bytes.
	TxSizeBytes metrics.Histogram

	// Number of failed transactions.
	FailedTxs metrics.Counter

	// RejectedTxs defines the number of rejected transactions. These are
	// transactions that passed CheckTx but failed to make it into the mempool
	// due to resource limits, e.g. mempool is full and no lower priority
	// transactions exist in the mempool.
	RejectedTxs metrics.Counter

	// EvictedTxs defines the number of evicted transactions. These are valid
	// transactions that passed CheckTx and existed in the mempool but were later
	// evicted to make room for higher priority valid transactions that passed
	// CheckTx.
	EvictedTxs metrics.Counter

	// Number of times transactions are rechecked in the mempool.
	RecheckTimes metrics.Counter
}

Metrics contains metrics exposed by this package. see MetricsProvider for descriptions.

func NopMetrics 

func NopMetrics() *Metrics

NopMetrics returns no-op Metrics.

func PrometheusMetrics 

func PrometheusMetrics(namespace string, labelsAndValues ...string) *Metrics

PrometheusMetrics returns Metrics build using Prometheus client library. Optionally, labels can be provided along with their values ("foo", "fooValue").

type NopTxCache 

type NopTxCache struct{}

NopTxCache defines a no-op raw transaction cache.

func (NopTxCache) Has 

func (NopTxCache) Has(types.Tx) bool

func (NopTxCache) Push 

func (NopTxCache) Push(types.Tx) bool

func (NopTxCache) Remove 

func (NopTxCache) Remove(types.Tx)

func (NopTxCache) Reset 

func (NopTxCache) Reset()

type PostCheckFunc 

type PostCheckFunc func(types.Tx, *abci.ResponseCheckTx) error

PostCheckFunc is an optional filter executed after CheckTx and rejects transaction if false is returned. An example would be to ensure a transaction doesn't require more gas than available for the block.

func PostCheckMaxGas 

func PostCheckMaxGas(maxGas int64) PostCheckFunc

PostCheckMaxGas checks that the wanted gas is smaller or equal to the passed maxGas. Returns nil if maxGas is -1.

type PreCheckFunc 

type PreCheckFunc func(types.Tx) error

PreCheckFunc is an optional filter executed before CheckTx and rejects transaction if false is returned. An example would be to ensure that a transaction doesn't exceeded the block size.

func PreCheckMaxBytes 

func PreCheckMaxBytes(maxBytes int64) PreCheckFunc

PreCheckMaxBytes checks that the size of the transaction is smaller or equal to the expected maxBytes.

type TxCache 

type TxCache interface {
	// Reset resets the cache to an empty state.
	Reset()

	// Push adds the given raw transaction to the cache and returns true if it was
	// newly added. Otherwise, it returns false.
	Push(tx types.Tx) bool

	// Remove removes the given raw transaction from the cache.
	Remove(tx types.Tx)

	// Has reports whether tx is present in the cache. Checking for presence is
	// not treated as an access of the value.
	Has(tx types.Tx) bool
}

TxCache defines an interface for raw transaction caching in a mempool. Currently, a TxCache does not allow direct reading or getting of transaction values. A TxCache is used primarily to push transactions and removing transactions. Pushing via Push returns a boolean telling the caller if the transaction already exists in the cache or not.

type TxInfo 

type TxInfo struct {
	// SenderID is the internal peer ID used in the mempool to identify the
	// sender, storing two bytes with each transaction instead of 20 bytes for
	// the types.NodeID.
	SenderID uint16

	// SenderP2PID is the actual p2p.ID of the sender, used e.g. for logging.
	SenderP2PID p2p.ID
}

TxInfo are parameters that get passed when attempting to add a tx to the mempool.

type TxKey 

type TxKey [sha256.Size]byte

TxKey is the fixed length array key used as an index.

Source Files

View all Source files

Directories

Path Synopsis

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.