Documentation ¶
Index ¶
- Constants
- Variables
- type Block
- func (b Block) CalculateSubsidy() Currency
- func (b Block) Header() BlockHeader
- func (b Block) ID() BlockID
- func (b Block) MarshalSia(w io.Writer) error
- func (b Block) MerkleRoot() crypto.Hash
- func (b Block) MinerPayoutID(i uint64) CoinOutputID
- func (b *Block) UnmarshalBlockHeadersParentIDAndTS(raw []byte) (BlockID, Timestamp)
- func (b *Block) UnmarshalSia(r io.Reader) error
- type BlockHeader
- type BlockHeight
- type BlockID
- type BlockStakeInput
- type BlockStakeOutput
- type BlockStakeOutputID
- type BlockStakeOutputIndexes
- type Clock
- type CoinInput
- type CoinOutput
- type CoinOutputID
- type CoveredFields
- type Currency
- func (x Currency) Add(y Currency) (c Currency)
- func (x Currency) Big() *big.Int
- func (x Currency) Cmp(y Currency) int
- func (x Currency) Div(y Currency) (c Currency)
- func (x Currency) Div64(y uint64) (c Currency)
- func (c Currency) IsZero() bool
- func (c Currency) MarshalJSON() ([]byte, error)
- func (c Currency) MarshalSia(w io.Writer) error
- func (x Currency) Mul(y Currency) (c Currency)
- func (x Currency) Mul64(y uint64) (c Currency)
- func (x Currency) MulFloat(y float64) (c Currency)
- func (x Currency) MulRat(y *big.Rat) (c Currency)
- func (x Currency) RoundDown(y Currency) (c Currency)
- func (c *Currency) Scan(s fmt.ScanState, ch rune) error
- func (x Currency) Sqrt() (c Currency)
- func (c Currency) String() string
- func (x Currency) Sub(y Currency) (c Currency)
- func (c Currency) Uint64() (u uint64, err error)
- func (c *Currency) UnmarshalJSON(b []byte) error
- func (c *Currency) UnmarshalSia(r io.Reader) error
- type Difficulty
- func (x Difficulty) Big() *big.Int
- func (x Difficulty) Cmp(y Difficulty) int
- func (x Difficulty) Div64(y uint64) (c Difficulty)
- func (c Difficulty) MarshalJSON() ([]byte, error)
- func (c Difficulty) MarshalSia(w io.Writer) error
- func (c *Difficulty) Scan(s fmt.ScanState, ch rune) error
- func (c Difficulty) String() string
- func (c *Difficulty) UnmarshalJSON(b []byte) error
- func (c *Difficulty) UnmarshalSia(r io.Reader) error
- type OutputID
- type SiaPublicKey
- type Specifier
- type StdClock
- type Target
- func (x Target) AddDifficulties(y Target) (t Target)
- func (x Target) Cmp(y Target) int
- func (t Target) Difficulty() Difficulty
- func (t Target) Int() *big.Int
- func (t Target) Inverse() *big.Rat
- func (x Target) MulDifficulty(y *big.Rat) (t Target)
- func (t Target) Rat() *big.Rat
- func (x Target) SubtractDifficulties(y Target) (t Target)
- type Timestamp
- type TimestampSlice
- type Transaction
- func (t Transaction) BlockStakeOutputID(i uint64) BlockStakeOutputID
- func (t Transaction) CoinOutputID(i uint64) CoinOutputID
- func (t Transaction) CoinOutputSum() (sum Currency)
- func (t Transaction) ID() TransactionID
- func (t Transaction) SigHash(i int) crypto.Hash
- func (t Transaction) StandaloneValid(currentHeight BlockHeight) (err error)
- type TransactionID
- type TransactionSignature
- type UnlockConditions
- type UnlockHash
- type UnlockHashSlice
- type UnspentBlockStakeOutput
Constants ¶
const ( // BlockHeaderSize is the size, in bytes, of a block header. // 32 (ParentID) + 8 (Timestamp) + 24 (8 BlockHeight + 8 TransactionIndex + 8 OutputIndex) + 32 (MerkleRoot) BlockHeaderSize = 96 )
const (
SpecifierLen = 16
)
const ( // UnlockHashChecksumSize is the size of the checksum used to verify // human-readable addresses. It is not a crypytographically secure // checksum, it's merely intended to prevent typos. 6 is chosen because it // brings the total size of the address to 38 bytes, leaving 2 bytes for // potential version additions in the future. UnlockHashChecksumSize = 6 )
Variables ¶
var ( BlockSizeLimit = uint64(2e6) RootDepth = Target{255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255} BlockFrequency BlockHeight MaturityDelay BlockHeight GenesisTimestamp Timestamp RootTarget Target MedianTimestampWindow = uint64(11) TargetWindow BlockHeight MaxAdjustmentUp *big.Rat MaxAdjustmentDown *big.Rat FutureThreshold Timestamp ExtremeFutureThreshold Timestamp StakeModifierDelay BlockHeight BlockStakeAging uint64 BlockCreatorFee Currency OneCoin = NewCurrency(new(big.Int).Exp(big.NewInt(10), big.NewInt(24), nil)) GenesisBlockStakeAllocation = []BlockStakeOutput{} GenesisBlockStakeCount Currency GenesisCoinDistribution = []CoinOutput{} GenesisCoinCount Currency GenesisBlock Block // GenesisID is used in many places. Calculating it once saves lots of // redundant computation. GenesisID BlockID // StartDifficulty is used in many places. Calculate it once. StartDifficulty Difficulty )
var ( // ZeroCurrency defines a currency of value zero. ZeroCurrency = NewCurrency64(0) // ErrNegativeCurrency is the error that is returned if performing an // operation results in a negative currency. ErrNegativeCurrency = errors.New("negative currency not allowed") // ErrUint64Overflow is the error that is returned if converting to a // unit64 would cause an overflow. ErrUint64Overflow = errors.New("cannot return the uint64 of this currency - result is an overflow") )
var ( // These Specifiers enumerate the types of signatures that are recognized // by this implementation. If a signature's type is unrecognized, the // signature is treated as valid. Signatures using the special "entropy" // type are always treated as invalid; see Consensus.md for more details. SignatureEntropy = Specifier{'e', 'n', 't', 'r', 'o', 'p', 'y'} SignatureEd25519 = Specifier{'e', 'd', '2', '5', '5', '1', '9'} ErrEntropyKey = errors.New("transaction tries to sign an entproy public key") ErrFrivilousSignature = errors.New("transaction contains a frivilous siganture") ErrInvalidPubKeyIndex = errors.New("transaction contains a signature that points to a nonexistent public key") ErrInvalidUnlockHashChecksum = errors.New("provided unlock hash has an invalid checksum") ErrMissingSignatures = errors.New("transaction has inputs with missing signatures") ErrPrematureSignature = errors.New("timelock on signature has not expired") ErrPublicKeyOveruse = errors.New("public key was used multiple times while signing transaction") ErrSortedUniqueViolation = errors.New("sorted unique violation") ErrUnlockHashWrongLen = errors.New("marshalled unlock hash is the wrong length") ErrWholeTransactionViolation = errors.New("covered fields violation") // FullCoveredFields is a covered fileds object where the // 'WholeTransaction' field has been set to true. The primary purpose of // this variable is syntactic sugar. FullCoveredFields = CoveredFields{WholeTransaction: true} )
var ( SpecifierMinerPayout = Specifier{'m', 'i', 'n', 'e', 'r', ' ', 'p', 'a', 'y', 'o', 'u', 't'} SpecifierCoinInput = Specifier{'c', 'o', 'i', 'n', ' ', 'i', 'n', 'p', 'u', 't'} SpecifierCoinOutput = Specifier{'c', 'o', 'i', 'n', ' ', 'o', 'u', 't', 'p', 'u', 't'} SpecifierBlockStakeInput = Specifier{'b', 'l', 's', 't', 'a', 'k', 'e', ' ', 'i', 'n', 'p', 'u', 't'} SpecifierBlockStakeOutput = Specifier{'b', 'l', 's', 't', 'a', 'k', 'e', ' ', 'o', 'u', 't', 'p', 'u', 't'} SpecifierMinerFee = Specifier{'m', 'i', 'n', 'e', 'r', ' ', 'f', 'e', 'e'} ErrTransactionIDWrongLen = errors.New("input has wrong length to be an encoded transaction id") )
These Specifiers are used internally when calculating a type's ID. See Specifier for more details.
var ( ErrDoubleSpend = errors.New("transaction uses a parent object twice") ErrNonZeroRevision = errors.New("new file contract has a nonzero revision number") ErrTimelockNotSatisfied = errors.New("timelock has not been met") ErrTransactionTooLarge = errors.New("transaction is too large to fit in a block") ErrZeroMinerFee = errors.New("transaction has a zero value miner fee") ErrZeroOutput = errors.New("transaction cannot have an output or payout that has zero value") )
var ( // ErrNegativeDifficulty is the error that is returned if performing an // operation results in a negative difficulty. ErrNegativeDifficulty = errors.New("negative difficulty not allowed") )
var (
ErrNegativeTarget = errors.New("negative value used when converting to target")
)
Functions ¶
This section is empty.
Types ¶
type Block ¶
type Block struct { ParentID BlockID `json:"parentid"` Timestamp Timestamp `json:"timestamp"` POBSOutput BlockStakeOutputIndexes `json:"pobsindexes"` MinerPayouts []CoinOutput `json:"minerpayouts"` Transactions []Transaction `json:"transactions"` }
A Block is a summary of changes to the state that have occurred since the previous block. Blocks reference the ID of the previous block (their "parent"), creating the linked-list commonly known as the blockchain. Their primary function is to bundle together transactions on the network. Blocks are created by "blockcreators," who collect transactions from other nodes, and then use there BlockStake and some other parameters to come below a given target.
func (Block) CalculateSubsidy ¶
CalculateSubsidy determines the block subsidy as the sum of the minerfees.
func (Block) ID ¶
ID returns the ID of a Block, which is calculated by hashing the concatenation of the block's parent's ID, nonce, and the result of the b.MerkleRoot(). It is equivalent to calling block.Header().ID()
func (Block) MarshalSia ¶
MarshalSia implements the encoding.SiaMarshaler interface.
func (Block) MerkleRoot ¶
MerkleRoot calculates the Merkle root of a Block. The leaves of the Merkle tree are composed of the miner outputs (one leaf per payout), and the transactions (one leaf per transaction).
func (Block) MinerPayoutID ¶
func (b Block) MinerPayoutID(i uint64) CoinOutputID
MinerPayoutID returns the ID of the miner payout at the given index, which is calculated by hashing the concatenation of the BlockID and the payout index.
func (*Block) UnmarshalBlockHeadersParentIDAndTS ¶ added in v0.1.0
UnmarshalBlockHeadersParentIDAndTS The MerkleRoot is not unmarshalled from the header because
type BlockHeader ¶
type BlockHeader struct { ParentID BlockID `json:"parentid"` Timestamp Timestamp `json:"timestamp"` POBSOutput BlockStakeOutputIndexes `json:"pobsindexes"` MerkleRoot crypto.Hash `json:"merkleroot"` }
A BlockHeader, when encoded, is an 96-byte constant size field containing enough information to do headers-first block downloading. Hashing the header results in the block ID.
func (BlockHeader) ID ¶
func (h BlockHeader) ID() BlockID
ID returns the ID of a Block, which is calculated by hashing the header.
type BlockHeight ¶
type BlockHeight uint64
type BlockID ¶
func (BlockID) MarshalJSON ¶
MarshalJSON marshales a block id as a hex string.
func (*BlockID) UnmarshalJSON ¶
UnmarshalJSON decodes the json hex string of the block id.
type BlockStakeInput ¶
type BlockStakeInput struct { ParentID BlockStakeOutputID `json:"parentid"` UnlockConditions UnlockConditions `json:"unlockconditions"` }
A BlockStakeInput consumes a BlockStakeOutput and adds the blockstakes to the set of blockstakes that can be spent in the transaction. The ParentID points to the output that is getting consumed, and the UnlockConditions contain the rules for spending the output. The UnlockConditions must match the UnlockHash of the output.
type BlockStakeOutput ¶
type BlockStakeOutput struct { Value Currency `json:"value"` UnlockHash UnlockHash `json:"unlockhash"` }
A BlockStakeOutput holds a volume of blockstakes. Outputs must be spent atomically; that is, they must all be spent in the same transaction. The UnlockHash is the hash of a set of UnlockConditions that must be fulfilled in order to spend the output.
type BlockStakeOutputID ¶
func (BlockStakeOutputID) MarshalJSON ¶
func (bsoid BlockStakeOutputID) MarshalJSON() ([]byte, error)
MarshalJSON marshales an id as a hex string.
func (BlockStakeOutputID) String ¶
func (bsoid BlockStakeOutputID) String() string
String prints the id in hex.
func (*BlockStakeOutputID) UnmarshalJSON ¶
func (bsoid *BlockStakeOutputID) UnmarshalJSON(b []byte) error
UnmarshalJSON decodes the json hex string of the id.
type BlockStakeOutputIndexes ¶ added in v0.1.0
type BlockStakeOutputIndexes struct { BlockHeight BlockHeight TransactionIndex uint64 OutputIndex uint64 }
BlockStakeOutputIndexes groups the block height, the transaction index and the output index to uniquely identify a blockstake output. These indexes and the value are required for the POBS protocol.
type Clock ¶
type Clock interface {
Now() Timestamp
}
Clock allows clients to retrieve the current time.
type CoinInput ¶ added in v0.1.0
type CoinInput struct { ParentID CoinOutputID `json:"parentid"` UnlockConditions UnlockConditions `json:"unlockconditions"` }
A SiacoinInput consumes a SiacoinOutput and adds the siacoins to the set of siacoins that can be spent in the transaction. The ParentID points to the output that is getting consumed, and the UnlockConditions contain the rules for spending the output. The UnlockConditions must match the UnlockHash of the output.
type CoinOutput ¶ added in v0.1.0
type CoinOutput struct { Value Currency `json:"value"` UnlockHash UnlockHash `json:"unlockhash"` }
A CoinOutput holds a volume of siacoins. Outputs must be spent atomically; that is, they must all be spent in the same transaction. The UnlockHash is the hash of the UnlockConditions that must be fulfilled in order to spend the output.
type CoinOutputID ¶ added in v0.1.0
func (CoinOutputID) MarshalJSON ¶ added in v0.1.0
func (scoid CoinOutputID) MarshalJSON() ([]byte, error)
MarshalJSON marshales an id as a hex string.
func (CoinOutputID) String ¶ added in v0.1.0
func (scoid CoinOutputID) String() string
String prints the id in hex.
func (*CoinOutputID) UnmarshalJSON ¶ added in v0.1.0
func (scoid *CoinOutputID) UnmarshalJSON(b []byte) error
UnmarshalJSON decodes the json hex string of the id.
type CoveredFields ¶
type CoveredFields struct { WholeTransaction bool `json:"wholetransaction"` CoinInputs []uint64 `json:"coininputs"` CoinOutputs []uint64 `json:"coinoutputs"` BlockStakeInputs []uint64 `json:"blockstakeinputs"` BlockStakeOutputs []uint64 `json:"blockstakeoutputs"` MinerFees []uint64 `json:"minerfees"` ArbitraryData []uint64 `json:"arbitrarydata"` TransactionSignatures []uint64 `json:"transactionsignatures"` }
CoveredFields indicates which fields in a transaction have been covered by the signature. (Note that the signature does not sign the fields themselves, but rather their combined hash; see SigHash.) Each slice corresponds to a slice in the Transaction type, indicating which indices of the slice have been signed. The indices must be valid, i.e. within the bounds of the slice. In addition, they must be sorted and unique.
As a convenience, a signature of the entire transaction can be indicated by the 'WholeTransaction' field. If 'WholeTransaction' == true, all other fields must be empty (except for the Signatures field, since a signature cannot sign itself).
type Currency ¶
type Currency struct {
// contains filtered or unexported fields
}
A Currency represents a number of siacoins or siafunds. Internally, a Currency value is unbounded; however, Currency values sent over the wire protocol are subject to a maximum size of 255 bytes (approximately 10^614). Unlike the math/big library, whose methods modify their receiver, all arithmetic Currency methods return a new value. Currency cannot be negative.
func NewCurrency ¶
NewCurrency creates a Currency value from a big.Int. Undefined behavior occurs if a negative input is used.
func NewCurrency64 ¶
NewCurrency64 creates a Currency value from a uint64.
func (Currency) Big ¶
Big returns the value of c as a *big.Int. Importantly, it does not provide access to the c's internal big.Int object, only a copy.
func (Currency) Cmp ¶
Cmp compares two Currency values. The return value follows the convention of math/big.
func (Currency) MarshalJSON ¶
MarshalJSON implements the json.Marshaler interface.
func (Currency) MarshalSia ¶
MarshalSia implements the encoding.SiaMarshaler interface. It writes the byte-slice representation of the Currency's internal big.Int to w. Note that as the bytes of the big.Int correspond to the absolute value of the integer, there is no way to marshal a negative Currency.
func (Currency) MulFloat ¶
COMPATv0.4.0 - until the first 10e3 blocks have been archived, MulFloat is needed while verifying the first set of blocks.
MulFloat returns a new Currency value y = c * x, where x is a float64. Behavior is undefined when x is negative.
func (*Currency) Scan ¶
Scan implements the fmt.Scanner interface, allowing Currency values to be scanned from text.
func (Currency) Sqrt ¶
Sqrt returns a new Currency value y = sqrt(c). Result is rounded down to the nearest integer.
func (Currency) Uint64 ¶
Uint64 converts a Currency to a uint64. An error is returned because this function is sometimes called on values that can be determined by users - rather than have all user-facing points do input checking, the input checking should happen at the base type. This minimizes the chances of a rogue user causing a build.Critical to be triggered.
func (*Currency) UnmarshalJSON ¶
UnmarshalJSON implements the json.Unmarshaler interface. An error is returned if a negative number is provided.
type Difficulty ¶ added in v0.1.0
type Difficulty struct {
// contains filtered or unexported fields
}
A Difficulty represents a number in number of blockstake times time in seconds Normally the difficulty is the number of active blockstake times the BlockFrequency. ex. If the number of active blockstake grows, the difficulty will also increase to maintain the same BlockFrequency.
func NewDifficulty ¶ added in v0.1.0
func NewDifficulty(b *big.Int) (d Difficulty)
NewDifficulty creates a Difficulty value from a big.Int. Undefined behavior occurs if a negative input is used.
func (Difficulty) Big ¶ added in v0.1.0
func (x Difficulty) Big() *big.Int
Big returns the value of c as a *big.Int. Importantly, it does not provide access to the c's internal big.Int object, only a copy.
func (Difficulty) Cmp ¶ added in v0.1.0
func (x Difficulty) Cmp(y Difficulty) int
Cmp compares two Difficulty values. The return value follows the convention of math/big.
func (Difficulty) Div64 ¶ added in v0.1.0
func (x Difficulty) Div64(y uint64) (c Difficulty)
Div64 returns a new Difficulty value c = x / y.
func (Difficulty) MarshalJSON ¶ added in v0.1.0
func (c Difficulty) MarshalJSON() ([]byte, error)
MarshalJSON implements the json.Marshaler interface.
func (Difficulty) MarshalSia ¶ added in v0.1.0
func (c Difficulty) MarshalSia(w io.Writer) error
MarshalSia implements the encoding.SiaMarshaler interface. It writes the byte-slice representation of the Difficulty's internal big.Int to w. Note that as the bytes of the big.Int correspond to the absolute value of the integer, there is no way to marshal a negative Difficulty.
func (*Difficulty) Scan ¶ added in v0.1.0
func (c *Difficulty) Scan(s fmt.ScanState, ch rune) error
Scan implements the fmt.Scanner interface, allowing Difficulty values to be scanned from text.
func (Difficulty) String ¶ added in v0.1.0
func (c Difficulty) String() string
String implements the fmt.Stringer interface.
func (*Difficulty) UnmarshalJSON ¶ added in v0.1.0
func (c *Difficulty) UnmarshalJSON(b []byte) error
UnmarshalJSON implements the json.Unmarshaler interface. An error is returned if a negative number is provided.
func (*Difficulty) UnmarshalSia ¶ added in v0.1.0
func (c *Difficulty) UnmarshalSia(r io.Reader) error
UnmarshalSia implements the encoding.SiaUnmarshaler interface.
type OutputID ¶
func (OutputID) MarshalJSON ¶
MarshalJSON marshales an id as a hex string.
func (*OutputID) UnmarshalJSON ¶
UnmarshalJSON decodes the json hex string of the id.
type SiaPublicKey ¶
A SiaPublicKey is a public key prefixed by a Specifier. The Specifier indicates the algorithm used for signing and verification. Unrecognized algorithms will always verify, which allows new algorithms to be added to the protocol via a soft-fork.
func (*SiaPublicKey) String ¶ added in v0.1.0
func (spk *SiaPublicKey) String() string
String defines how to print a SiaPublicKey - hex is used to keep things compact during logging. The key type prefix and lack of a checksum help to separate it from a sia address.
type Specifier ¶
type Specifier [SpecifierLen]byte
A Specifier is a fixed-length byte-array that serves two purposes. In the wire protocol, they are used to identify a particular encoding algorithm, signature algorithm, etc. This allows nodes to communicate on their own terms; for example, to reduce bandwidth costs, a node might only accept compressed messages.
Internally, Specifiers are used to guarantee unique IDs. Various consensus types have an associated ID, calculated by hashing the data contained in the type. By prepending the data with Specifier, we can guarantee that distinct types will never produce the same hash.
func (Specifier) MarshalJSON ¶
MarshalJSON marshales a specifier as a hex string.
func (*Specifier) UnmarshalJSON ¶
UnmarshalJSON decodes the json hex string of the id.
type StdClock ¶
type StdClock struct{}
StdClock is an implementation of Clock that retrieves the current time using the system time.
type Target ¶
A Target is a hash that a block's ID must be "less than" in order for the block to be considered valid. Miners vary the block's 'Nonce' field in order to brute-force such an ID. The inverse of a Target is called the "difficulty," because it is proportional to the amount of time required to brute-force the Target.
func IntToTarget ¶
IntToTarget converts a big.Int to a Target. Negative inputs trigger a panic.
func NewTarget ¶ added in v0.1.0
func NewTarget(difficulty Difficulty) Target
NewTarget makes a new target from a given difficulty
func RatToTarget ¶
RatToTarget converts a big.Rat to a Target.
func (Target) AddDifficulties ¶
AddDifficulties returns the resulting target with the difficulty of 'x' and 'y' are added together. Note that the difficulty is the inverse of the target. The sum is defined by:
sum(x, y) = 1/(1/x + 1/y)
func (Target) Cmp ¶
Cmp compares the difficulties of two targets. Note that the difficulty is the inverse of the target. The results are as follows:
-1 if x < y 0 if x == y +1 if x > y
func (Target) Difficulty ¶
func (t Target) Difficulty() Difficulty
Difficulty returns the difficulty associated with a given target.
func (Target) MulDifficulty ¶
Mul multiplies the difficulty of a target by y. The product is defined by:
y / x
func (Target) SubtractDifficulties ¶
SubtractDifficulties returns the resulting target with the difficulty of 'x' is subtracted from the target with difficulty 'y'. Note that the difficulty is the inverse of the target. The difference is defined by:
sum(x, y) = 1/(1/x - 1/y)
type Timestamp ¶
type Timestamp uint64
func CurrentTimestamp ¶
func CurrentTimestamp() Timestamp
CurrentTimestamp returns the current time as a Timestamp.
type TimestampSlice ¶
type TimestampSlice []Timestamp
func (TimestampSlice) Less ¶
func (ts TimestampSlice) Less(i, j int) bool
Less is part of sort.Interface
type Transaction ¶
type Transaction struct { CoinInputs []CoinInput `json:"coininputs"` CoinOutputs []CoinOutput `json:"coinoutputs"` BlockStakeInputs []BlockStakeInput `json:"blockstakeinputs"` BlockStakeOutputs []BlockStakeOutput `json:"blockstakeoutputs"` MinerFees []Currency `json:"minerfees"` ArbitraryData [][]byte `json:"arbitrarydata"` TransactionSignatures []TransactionSignature `json:"transactionsignatures"` }
A Transaction is an atomic component of a block. Transactions can contain inputs and outputs and even arbitrary data. They can also contain signatures to prove that a given party has approved the transaction, or at least a particular subset of it.
Transactions can depend on other previous transactions in the same block, but transactions cannot spend outputs that they create or otherwise be self-dependent.
func (Transaction) BlockStakeOutputID ¶
func (t Transaction) BlockStakeOutputID(i uint64) BlockStakeOutputID
BlockStakeOutputID returns the ID of a BlockStakeOutput at the given index, which is calculated by hashing the concatenation of the BlockStakeOutput Specifier, all of the fields in the transaction (except the signatures), and output index.
func (Transaction) CoinOutputID ¶ added in v0.1.0
func (t Transaction) CoinOutputID(i uint64) CoinOutputID
CoinOutputID returns the ID of a coin output at the given index, which is calculated by hashing the concatenation of the CoinOutput Specifier, all of the fields in the transaction (except the signatures), and output index.
func (Transaction) CoinOutputSum ¶ added in v0.1.0
func (t Transaction) CoinOutputSum() (sum Currency)
CoinOutputSum returns the sum of all the coin outputs in the transaction, which must match the sum of all the coin inputs.
func (Transaction) ID ¶
func (t Transaction) ID() TransactionID
ID returns the id of a transaction, which is taken by marshalling all of the fields except for the signatures and taking the hash of the result.
func (Transaction) SigHash ¶
func (t Transaction) SigHash(i int) crypto.Hash
SigHash returns the hash of the fields in a transaction covered by a given signature. See CoveredFields for more details.
func (Transaction) StandaloneValid ¶
func (t Transaction) StandaloneValid(currentHeight BlockHeight) (err error)
StandaloneValid returns an error if a transaction is not valid in any context, for example if the same output is spent twice in the same transaction. StandaloneValid will not check that all outputs being spent are legal outputs, as it has no confirmed or unconfirmed set to look at.
type TransactionID ¶
IDs are used to refer to a type without revealing its contents. They are constructed by hashing specific fields of the type, along with a Specifier. While all of these types are hashes, defining type aliases gives us type safety and makes the code more readable.
func (TransactionID) MarshalJSON ¶
func (tid TransactionID) MarshalJSON() ([]byte, error)
MarshalJSON marshales an id as a hex string.
func (*TransactionID) UnmarshalJSON ¶
func (tid *TransactionID) UnmarshalJSON(b []byte) error
UnmarshalJSON decodes the json hex string of the id.
type TransactionSignature ¶
type TransactionSignature struct { ParentID crypto.Hash `json:"parentid"` PublicKeyIndex uint64 `json:"publickeyindex"` Timelock BlockHeight `json:"timelock"` CoveredFields CoveredFields `json:"coveredfields"` Signature []byte `json:"signature"` }
A TransactionSignature is a signature that is included in the transaction. The signature should correspond to a public key in one of the UnlockConditions of the transaction. This key is specified first by 'ParentID', which specifies the UnlockConditions, and then 'PublicKeyIndex', which indicates the key in the UnlockConditions. There are three types that use UnlockConditions: SiacoinInputs, SiafundInputs, and FileContractTerminations. Each of these types also references a ParentID, and this is the hash that 'ParentID' must match. The 'Timelock' prevents the signature from being used until a certain height. 'CoveredFields' indicates which parts of the transaction are being signed; see CoveredFields.
type UnlockConditions ¶
type UnlockConditions struct { Timelock BlockHeight `json:"timelock"` PublicKeys []SiaPublicKey `json:"publickeys"` SignaturesRequired uint64 `json:"signaturesrequired"` }
UnlockConditions are a set of conditions which must be met to execute certain actions, such as spending a SiacoinOutput or terminating a FileContract.
The simplest requirement is that the block containing the UnlockConditions must have a height >= 'Timelock'.
'PublicKeys' specifies the set of keys that can be used to satisfy the UnlockConditions; of these, at least 'SignaturesRequired' unique keys must sign the transaction. The keys that do not need to use the same cryptographic algorithm.
If 'SignaturesRequired' == 0, the UnlockConditions are effectively "anyone can unlock." If 'SignaturesRequired' > len('PublicKeys'), then the UnlockConditions cannot be fulfilled under any circumstances.
func (UnlockConditions) UnlockHash ¶
func (uc UnlockConditions) UnlockHash() UnlockHash
UnlockHash calculates the root hash of a Merkle tree of the UnlockConditions object. The leaves of this tree are formed by taking the hash of the timelock, the hash of the public keys (one leaf each), and the hash of the number of signatures. The keys are put in the middle because Timelock and SignaturesRequired are both low entropy fields; they can bee protected by having random public keys next to them.
type UnlockHash ¶
An UnlockHash is a specially constructed hash of the UnlockConditions type. "Locked" values can be unlocked by providing the UnlockConditions that hash to a given UnlockHash. See SpendConditions.UnlockHash for details on how the UnlockHash is constructed.
func (*UnlockHash) LoadString ¶
func (uh *UnlockHash) LoadString(strUH string) error
LoadString loads a hex representation (including checksum) of an unlock hash into an unlock hash object. An error is returned if the string is invalid or fails the checksum.
func (UnlockHash) MarshalJSON ¶
func (uh UnlockHash) MarshalJSON() ([]byte, error)
MarshalJSON is implemented on the unlock hash to always produce a hex string upon marshalling.
func (UnlockHash) String ¶
func (uh UnlockHash) String() string
String returns the hex representation of the unlock hash as a string - this includes a checksum.
func (*UnlockHash) UnmarshalJSON ¶
func (uh *UnlockHash) UnmarshalJSON(b []byte) error
UnmarshalJSON is implemented on the unlock hash to recover an unlock hash that has been encoded to a hex string.
type UnlockHashSlice ¶
type UnlockHashSlice []UnlockHash
func (UnlockHashSlice) Len ¶
func (uhs UnlockHashSlice) Len() int
Len implements the Len method of sort.Interface.
func (UnlockHashSlice) Less ¶
func (uhs UnlockHashSlice) Less(i, j int) bool
Less implements the Less method of sort.Interface.
func (UnlockHashSlice) Swap ¶
func (uhs UnlockHashSlice) Swap(i, j int)
Swap implements the Swap method of sort.Interface.
type UnspentBlockStakeOutput ¶ added in v0.1.0
type UnspentBlockStakeOutput struct { BlockStakeOutputID BlockStakeOutputID Indexes BlockStakeOutputIndexes Value Currency UnlockHash UnlockHash }
UnspentBlockStakeOutput groups the BlockStakeOutputID, the block height, the transaction index, the output index and the value