terraform-provisioner-ansible

README

Ansible provisioner for Terraform

Ansible with Terraform 0.12.x - remote and local provisioners.

General overview

The purpose of the provisioner is to provide an easy method for running Ansible to configure hosts created with Terraform.

This provisioner, however, is not designed to handle all possible Ansible use cases. Lets consider what's possible and what's not possible with this provisioner.

For after provisioning, you may find the following Ansible module useful if you use AWS S3 for state storage: terraform-state-ansible-module.

What's possible

• compute resource local provisioner

  • configured on a compute resource e.g. aws_instance, ibm_compute_vm_instance
  • runs Ansible installed on the same machine where Terraform is executed
  • the provisioner will create a temporary inventory and execute Ansible only against hosts created with Terraform resource
  • If count is used with the compute resource and is greater than 1, the provisioner runs after each resource instance is created, passing the host information for that instance only.
  • Ansible Vault password file / Vault ID files can be used
  • the temporary inventory uses ansible_connection=ssh, the host alias is resolved from the resource.connection attribute, it is possible to specify an ansible_host using plays.hosts

• compute resource remote provisioner

  • configured on a compute resource e.g. aws_instance, ibm_compute_vm_instance
  • runs Ansible on the hosts created with Terraform resource
  • if Ansible is not installed on the newly created hosts, the provisioner can install one
  • the provisioner will create a temporary inventory and execute Ansible only against hosts created with Terraform resource
  • playbooks, roles, Vault password file / Vault ID files and the temporary inventory file will be uploaded to the each host prior to Ansible run
  • hosts are provisioned using ansible_connection=local
  • an alias can be provided using hosts, each host will be included in every group provided with groups but each of them will use ansible_connection=local

• null_resource local provisioner

  • configured on a null_resouce
  • runs Ansible installed on the same machine where Terraform is executed
  • Executes Ansible against the hosts defined by a list of IP addresses passed by interpolation on the plays.hosts attribute. The host group is defined by plays.groups.
  • Executes the Ansible provisioner once against all hosts defined in plays.hosts, triggered by the availability of the interpolated vars.
  • Alternatively an inventory file (staticly defined or dynamically templated) can be passed to Ansible to specify a list of Terraform provisioned hosts and groups to be passed to Ansible to execute against in a single run.
  • Inventory file can also be used with Ansible dynamic inventory and inventory plugins.
  • The Terraform depends_on attribute can be used to determine when the Ansible provisioner is executed in relation to the provisioning of other Terraform resources
  • If the Terraform host is on the same network (cloud hosted or VPN) as the provisioned hosts, private IP addresses can be passed eliminating the requirement for bastion hosts or public SSH access.
  • Ansible Vault password file / Vault ID files can be used

What's not possible

The provisioner by no means attempts to implement all Ansible use cases. The provisioner is not intended to be used as a jump host. For example, the remote mode does not allow provisioning hosts other than the one where Ansible is executed. The number of use cases and possibilities covered by Ansible is so wide that having to strive for full support is a huge undertaking for one person. Using the provisioner with a null_resource provides further options for passing the Ansible inventory, including dynamic inventory, to meet use cases not addressed when used with a compute resource.

If you find yourself in need of executing Ansible against well specified, complex inventories, either follow the regular process of provisoning hosts via Terraform and executing Ansible against them as a separate step, or initate the Ansible execution as the last Terraform task using null_resource and depends_on. Of course, pull requests are always welcomed!

Installation

Using Docker

$ cd /my-terraform-project
$ docker run -it --rm -v $PWD:$PWD -w $PWD radekg/terraform-ansible:latest init
$ docker run -it --rm -v $PWD:$PWD -w $PWD radekg/terraform-ansible:latest apply

Local Installation

Note that although terraform-provisioner-ansible is in the terraform registry, it cannot be installed using a module terraform stanza, as such a configuration will not cause terraform to download the terraform-provisioner-ansible binary.

Prebuilt releases are available on GitHub. Download a release for the version you require and place it in ~/.terraform.d/plugins directory, as documented here.

Caution: you will need to rename the file to match the pattern recognized by Terraform: terraform-provisioner-ansible_v<version>.

Alternatively, you can download and deploy an existing release using the following script:

curl -sL \
  https://raw.githubusercontent.com/radekg/terraform-provisioner-ansible/master/bin/deploy-release.sh \
  --output /tmp/deploy-release.sh
chmod +x /tmp/deploy-release.sh
/tmp/deploy-release.sh -v <version number>
rm -rf /tmp/deploy-release.sh

Configuration

Example:

resource "aws_instance" "test_box" {
  # ...
  connection {
    host = "..."
    user = "centos"
  }
  provisioner "ansible" {
    plays {
      playbook {
        file_path = "/path/to/playbook/file.yml"
        roles_path = ["/path1", "/path2"]
        force_handlers = false
        skip_tags = ["list", "of", "tags", "to", "skip"]
        start_at_task = "task-name"
        tags = ["list", "of", "tags"]
      }
      # shared attributes
      enabled = true
      hosts = ["zookeeper"]
      groups = ["consensus"]
      become = false
      become_method = "sudo"
      become_user = "root"
      diff = false
      extra_vars = {
        extra = {
          variables = {
            to = "pass"
          }
        }
      }
      forks = 5
      inventory_file = "/optional/inventory/file/path"
      limit = "limit"
      vault_id = ["/vault/password/file/path"]
      verbose = false
    }
    plays {
      module {
        module = "module-name"
        args = {
          "arbitrary" = "arguments"
        }
        background = 0
        host_pattern = "string host pattern"
        one_line = false
        poll = 15
      }
      # shared attributes
      # enabled = ...
      # ...
    }
    defaults {
      hosts = ["eu-central-1"]
      groups = ["platform"]
      become_method = "sudo"
      become_user = "root"
      extra_vars = {
        extra = {
          variables = {
            to = "pass"
          }
        }
      }
      forks = 5
      inventory_file = "/optional/inventory/file/path"
      limit = "limit"
      vault_id = ["/vault/password/file/path"]
    }
    ansible_ssh_settings {
      connect_timeout_seconds = 10
      connection_attempts = 10
      ssh_keyscan_timeout = 60
      insecure_no_strict_host_key_checking = false
      insecure_bastion_no_strict_host_key_checking = false
      user_known_hosts_file = ""
      bastion_user_known_hosts_file = ""
    }
    remote {
      use_sudo = true
      skip_install = false
      skip_cleanup = false
      install_version = ""
      local_installer_path = ""
      remote_installer_directory = "/tmp"
      bootstrap_directory = "/tmp"
    }
  }
}

resource "aws_instance" "test_box" {
  # ...
}

resource "null_resource" "test_box" {
  depends_on = "aws_instance.test_box"
  connection {
    host = "${aws_instance.test_box.0.public_ip}"
    private_key = "${file("./test_box")}"
  }
  provisioner "ansible" {
    plays {
      playbook {
        file_path = "/path/to/playbook/file.yml"
        roles_path = ["/path1", "/path2"]
        force_handlers = false
        skip_tags = ["list", "of", "tags", "to", "skip"]
        start_at_task = "task-name"
        tags = ["list", "of", "tags"]
      }
      hosts = ["aws_instance.test_box.*.public_ip"]
      groups = ["consensus"]
    }
  }
}

Plays

Selecting what to run

Each plays must contain exactly one playbook or module. Define multiple plays when more than one Ansible action shall be executed against a host.

Playbook attributes

• plays.playbook.file_path: full path to the playbook YAML file; remote provisioning: a complete parent directory will be uploaded to the host
• plays.playbook.roles_path: ansible-playbook --roles-path, list of full paths to directories containing your roles; remote provisioning: all directories will be uploaded to the host; string list, default empty list (not applies)
• plays.playbook.force_handlers: ansible-playbook --force-handlers, boolean, default false
• plays.playbook.skip_tags: ansible-playbook --skip-tags, string list, default empty list (not applied)
• plays.playbook.start_at_task: ansible-playbook --start-at-task, string, default empty string (not applied)
• plays.playbook.tags: ansible-playbook --tags, string list, default empty list (not applied)

Module attributes

• plays.module.args: ansible --args, map, default empty map (not applied); values of type list and map will be converted to strings using %+v, avoid using those unless you really know what you are doing
• plays.module.background: ansible --background, int, default 0 (not applied)
• plays.module.host_pattern: ansible <host-pattern>, string, default all
• plays.module.one_line: ansible --one-line, boolean , default false (not applied)
• plays.module.poll: ansible --poll, int, default 15 (applied only when background > 0)

Plays attributes

• plays.hosts: list of hosts to include in auto-generated inventory file when inventory_file not given, string list, default empty list; When used with nulll_resource this can be an interpolated list of host IP address public or private; more details below
• plays.groups: list of groups to include in auto-generated inventory file when inventory_file not given, string list, default empty list; more details below
• plays.enabled: boolean, default true; set to false to skip execution
• plays.become: ansible[-playbook] --become, boolean, default false (not applied)
• plays.become_method: ansible[-playbook] --become-method, string, default sudo, only takes effect when become = true
• plays.become_user: ansible[-playbook] --become-user, string, default root, only takes effect when become = true
• plays.diff: ansible[-playbook] --diff, boolean, default false (not applied)
• plays.extra_vars: ansible[-playbook] --extra-vars, map, default empty map (not applied); will be serialized to a JSON string, supports values of different types, including lists and maps
• plays.forks: ansible[-playbook] --forks, int, default 5
• plays.inventory_file: full path to an inventory file, ansible[-playbook] --inventory-file, string, default empty string; if inventory_file attribute is not given or empty, a temporary inventory using hosts and groups will be generated; when specified, hosts and groups are not in use
• plays.limit: ansible[-playbook] --limit, string, default empty string (not applied)
• plays.vault_id: ansible[-playbook] --vault-id, list of full paths to vault password files; remote provisioning: files will be uploaded to the server, string list, default empty list (not applied); takes precedence over plays.vault_password_file
• plays.vault_password_file: ansible[-playbook] --vault-password-file, full path to the vault password file; remote provisioning: file will be uploaded to the server, string, default empty string (not applied)
• plays.verbose: ansible[-playbook] --verbose, boolean, default false (not applied)

Defaults

Some of the plays settings might be common across multiple plays. Such settings can be provided using the defaults attribute. Any setting from the following list can be specified in defaults:

• defaults.hosts
• defaults.groups
• defaults.become_method
• defaults.become_user
• defaults.extra_vars
• defaults.forks
• defaults.inventory_file
• defaults.limit
• defaults.vault_id
• defaults.vault_password_file

None of the boolean attributes can be specified in defaults. Neither playbook nor module can be specified in defaults.

Ansible SSH settings

• ansible_ssh_settings.connect_timeout_seconds: SSH ConnectTimeout, default 10 seconds
• ansible_ssh_settings.connection_attempts: SSH ConnectionAttempts, default 10
• ansible_ssh_settings.ssh_keyscan_timeout: when ssh-keyscan is used, how long to try fetching the host key until failing, default 60 seconds

Following settings apply to local provisioning only:

• ansible_ssh_settings.insecure_no_strict_host_key_checking: if true, host key checking will be disabled when connecting to the target host, default false; when connecting via bastion, bastion will not execute any SSH keyscan
• ansible_ssh_settings.insecure_bastion_no_strict_host_key_checking: if true, host key checking will be disabled when connecting to the bastion host, default false
• ansible_ssh_settings.user_known_hosts_file: used only when ansible_ssh_settings.insecure_no_strict_host_key_checking=false; if set, the provided path will be used instead of an auto-generate known hosts file; when executing via bastion host, it allows the administrator to provide a known hosts file, no SSH keyscan will be executed on the bastion; default empty string
• ansible_ssh_settings.bastion_user_known_hosts_file: used only when ansible_ssh_settings.insecure_bastion_no_strict_host_key_checking=false; if set, the provided path will be used instead of an auto-generate known hosts file

Remote

The existence of this resource enables remote provisioning. To use remote provisioner with its default settings, simply add remote {} to your provisioner.

• remote.use_sudo: should sudo be used for bootstrap commands, boolean, default true, become does not make much sense; this attribute has no relevance to Ansible --sudo flag
• remote.skip_install: if set to true, Ansible installation on the server will be skipped, assume Ansible is already installed, boolean, default false
• remote.skip_cleanup: if set to true, Ansible bootstrap data will be left on the server after bootstrap, boolean, default false
• remote.install_version: Ansible version to install when skip_install = false and default installer is in ude, string, default empty string (latest version available in respective repositories)
• remote.local_installer_path: full path to the custom Ansible installer on the local machine, used when skip_install = false, string, default empty string; when empty and skip_install = false, the default installer is used
• remote.remote_installer_directory: full path to the remote directory where custom Ansible installer will be deployed to and executed from, used when skip_install = false, string, default /tmp; any intermediate directories will be created; the program will be executed with sh, use shebang if program requires a non-shell interpreter; the installer will be saved as tf-ansible-installer under the given directory; for /tmp, the path will be /tmp/tf-ansible-installer
• remote.bootstrap_directory: full path to the remote directory where playbooks, roles, password files and such will be uploaded to, used when skip_install = false, string, default /tmp; the final directory will have tf-ansible-bootstrap appended to it; for /tmp, the directory will be /tmp/tf-ansible-bootstrap

Examples

Working examples.

Usage

The provisioner does not support passwords. It is possible to add password support for:

• remote provisioner without bastion: host passwords reside in the inventory file
• remote provisioner with bastion: host passwords reside in the inventory file, bastion is handled by Terraform, password is never visible
• local provisioner without bastion: host passwords reside in the inventory file

However, local provisioner with bastion currently rely on executing an Ansible command with SSH -o ProxyCommand, this would require putting the password on the terminal. For consistency, consider no password support.

Local provisioner: SSH details

Local provisioner requires the resource.connection with, at least, the user defined. After the bootstrap, the plugin will inspect the connection info, check if the user and private_key are set and that provisioning succeeded, indeed, by checking the host (which should be an ip address of the newly created instance). If the connection info does not provide the SSH private key, ssh agent mode is assumed.

In the process of doing so, a temporary inventory will be created for the newly created host, the pem file will be written to a temp file and a temporary known_hosts file will be created. Temporary known_hosts and temporary pem are per provisioner run, inventory is created for each plays. Files are cleaned up after the provisioner finishes or fails. Inventory will be removed only if not supplied with inventory_file.

Local provisioner: host and bastion host keys

Because the provisioner executes SSH commands outside of itself, via Ansible command line tools, the provisioner must construct a temporary SSH known_hosts file to feed to Ansible. There are two possible scenarios.

Host without a bastion

1. If connection.host_key is used, the provisioner will use the provided host key to construct the temporary known_hosts file.
2. If connection.host_key is not given or empty, the provisioner will attempt a connection to the host and retrieve first host key returned during the handshake (similar to ssh-keyscan but using Golang SSH).

Host with bastion

This is a little bit more involved than the previous case.

1. If connection.bastion_host_key is provided, the provisioner will use the provided bastion host key for the known_hosts file.
2. If connection.bastion_host_key is not given or empty, the provisioner will attempt a connection to the bastion host and retrieve first host key returned during the handshake (similar to ssh-keyscan but using Golang SSH).

However, Ansible must know the host key of the target host where the bootstrap actually happens. If connection.host_key is provided, the provisioner will simply use the provieded value. But, if no connection.host_key is given (or empty), the provisioner will open an SSH connection to the bastion host and perform an ssh-keyscan operation against the target host on the bastion host.

In the ssh-keyscan case, the bastion host must:

• be a Linux / BSD based system
• unless bastion_host_key is used:
  • have cat, echo, grep, mkdir, rm, ssh-keyscan commands available on the $PATH for the SSH user
  • have $HOME enviornment variable set for the SSH user

Compute resource local provisioner: hosts and groups

The plays.hosts and defaults.hosts attributes can be used with local provisioner. When used with a compute resource only the first defined host will be used when generating the inventory file and additional hosts will be ignored. If plays.hosts or defaults.hosts is not specified, the provisioner uses the public IP address of the Terraform provisioned resource instance. The inventory file is generated in the following format with a single host:

aFirstHost ansible_host=<ip address of the host> ansible_connection-ssh

For each group, additional ini section will be added, where each section is:

[groupName]
aFirstHost ansible_host=<ip address of the host> ansible_connection-ssh

For a host list ["someHost"] and a group list of ["group1", "group2"], the inventory would be:

someHost ansible_host=<ip> ansible_connection-ssh

[group1]
someHost ansible_host=<ip> ansible_connection-ssh

[group2]
someHost ansible_host=<ip> ansible_connection-ssh

If hosts is an empty list or not given, the resulting generated inventory is:

<ip> ansible_connection-ssh

[group1]
<ip> ansible_connection-ssh

[group2]
<ip> ansible_connection-ssh

Null_resource local provisioner: hosts and groups

The plays.hosts and defaults.hosts can be used with local provisioner on a null_resource. All passed hosts are used when generating the inventory file. The inventory file is generated in the following format:

<firstHost IP> 
<secondHost IP>

For each group, additional ini section will be added, where each section is:

[groupName]
<firstHost IP> 
<secondHost IP>

For a host list ["firstHost IP", "secondHost IP"] and a group list of ["group1", "group2"], the inventory would be:

<firstHost IP> 
<secondHost IP>

[group1]
<firstHost IP> 
<secondHost IP>

[group2]
<firstHost IP> 
<secondHost IP>

Remote provisioner: running on hosts created by Terraform

Remote provisioner can be enabled by adding remote {} resource to the provisioner resource.

resource "aws_instance" "ansible_test" {
  # ...
  connection {
    user = "centos"
    private_key = "${file("${path.module}/keys/centos.pem")}"
  }
  provisioner "ansible" {
    plays {
      # ...
    }
    
    # enable remote provisioner
    remote {}
    
  }
}

Unless remote.skip_install = true, the provisioner will install Ansible on the bootstrapped machine. Next, a temporary inventory file is created and uploaded to the host, any playbooks, roles, Vault password files are uploaded to the host.

Remote provisioning works with a Linux target host only.

Supported Ansible repository layouts

This provisioner supports two main repository layouts.

1. Roles nested under the playbook directory:

   .
   ├── install-tree.yml
   └── roles
       └── tree
           └── tasks
               └── main.yml
   

2. Roles and playbooks directories separate:

   .
   ├── playbooks
   │   └── install-tree.yml
   └── roles
       └── tree
           └── tasks
               └── main.yml
   

In the first case, to reference the roles, it is necessary to use plays.playbook.roles_path attribute:

    plays {
      playbook {
        file_path = ".../playbooks/install-tree.yml"
        roles_path = [
            ".../ansible-data/roles"
        ]
      }
    }

In the second case, it is sufficient to use only the plays.playbook.file_path, roles are nested, thus available to Ansible:

    plays {
      playbook {
        file_path = ".../playbooks/install-tree.yml"
      }
    }

Remote provisioning directory upload

A remark regardng remote provisioning. Remote provisioner must upload referenced playbooks and role paths to the remote server. In case of a playbook, the complete parent directory of the YAML file will be uploaded. Remote provisioner attempts to deduplicate uploads, if multiple plays reference the same playbook, the playbook will be uploaded only once. This is achieved by generating an MD5 hash of the absolute path to the playbook's parent directory and storing your playbooks at ${remote.bootstrap_direcotry}/${md5-hash} on the remote server.

For the roles path, the complete directory as referenced in roles_path will be uploaded to the remote server. Same deduplication method applies but the MD5 hash is the roles_path itself.

Tests

Integration tests require ansible and ansible-playbook on the $PATH. To run tests:

make test-verbose

Creating releases

To cut a release, run:

curl -sL https://raw.githubusercontent.com/radekg/git-release/master/git-release --output /tmp/git-release
chmod +x /tmp/git-release
/tmp/git-release --repository-path=$GOPATH/src/github.com/radekg/terraform-provisioner-ansible
rm -rf /tmp/git-release

After the release is cut, build the binaries for the release:

git checkout v${RELEASE_VERSION}
./bin/build-release-binaries.sh

Handle Docker image:

git checkout v${RELEASE_VERSION}
docker build --build-arg TAP_VERSION=$(cat .version) -t radekg/terraform-ansible:$(cat .version) .
docker login --username=radekg
docker tag radekg/terraform-ansible:$(cat .version) radekg/terraform-ansible:latest
docker push radekg/terraform-ansible:$(cat .version)
docker push radekg/terraform-ansible:latest

Note that the version is hardcoded in the Dockerfile. You may wish to update it after release.