README
¶
go-ipfs
IPFS implementation in Go
IPFS is a global, versioned, peer-to-peer filesystem. It combines good ideas from Git, BitTorrent, Kademlia, SFS, and the Web. It is like a single bittorrent swarm, exchanging git objects. IPFS provides an interface as simple as the HTTP web, but with permanence built in. You can also mount the world at /ipfs.
For more info see: https://github.com/ipfs/ipfs.
Please put all issues regarding IPFS design in the ipfs repo issues. Please put all issues regarding the Go IPFS implementation in this repo.
Table of Contents
Security Issues
The IPFS protocol and its implementations are still in heavy development. This means that there may be problems in our protocols, or there may be mistakes in our implementations. And -- though IPFS is not production-ready yet -- many people are already running nodes in their machines. So we take security vulnerabilities very seriously. If you discover a security issue, please bring it to our attention right away!
If you find a vulnerability that may affect live deployments -- for example, by exposing a remote execution exploit -- please send your report privately to security@ipfs.io. Please DO NOT file a public issue.
If the issue is a protocol weakness that cannot be immediately exploited or something not yet deployed, just discuss it openly.
Install
The canonical download instructions for IPFS are over at: http://ipfs.io/docs/install/. It is highly suggested you follow those instructions if you are not interested in working on IPFS development.
Install prebuilt packages
We host prebuilt binaries over at our distributions page.
From there:
- Click the blue "Download go-ipfs" on the right side of the page.
- Open/extract the archive.
- Move
ipfsto your path (install.shcan do it for you).
Build from Source
Install Go
The build process for ipfs requires Go 1.5+, but we strongly recommend using 1.6.2. If you don't have it: Download Go 1.6.2+.
You'll need to add Go's bin directories to your $PATH environment variable e.g., by adding these lines to your /etc/profile (for a system-wide installation) or $HOME/.profile:
export PATH=$PATH:/usr/local/go/bin
export PATH=$PATH:$GOPATH/bin
(If you run into trouble, see the Go install instructions).
Download and Compile IPFS
go-ipfs differs from the vanilla go get flow: it uses
gx/gx-go
for dependency management.
First download go-ipfs without installing:
$ go get -d github.com/ipfs/go-ipfs
$ cd $GOPATH/src/github.com/ipfs/go-ipfs
Then install go-ipfs and its dependencies, including gx and gx-go:
$ make install
Troubleshooting
- Separate instructions are available for building on Windows.
gitis required in order forgo getto fetch all dependencies.- Package managers often contain out-of-date
golangpackages. Ensure thatgo versionreports at least 1.5.2. See above for how to install go. - If you are interested in development, please install the development dependencies as well.
- WARNING: Older versions of OSX FUSE (for Mac OS X) can cause kernel panics when mounting! We strongly recommend you use the latest version of OSX FUSE. (See https://github.com/ipfs/go-ipfs/issues/177)
- For more details on setting up FUSE (so that you can mount the filesystem), see the docs folder.
- Shell command completion is available in
misc/completion/ipfs-completion.bash. Read docs/command-completion.md to learn how to install it. - See the init examples for how to connect IPFS to systemd or whatever init system your distro uses.
Development Dependencies
If you make changes to the protocol buffers, you will need to install the protoc compiler.
Updating
IPFS has an updating tool that can be accessed through ipfs update. The tool is
not installed alongside IPFS in order to keep that logic independent of the main
codebase. To install ipfs update, either download it here
or install it from source with go get -u github.com/ipfs/ipfs-update.
Usage
ipfs - Global p2p merkle-dag filesystem.
ipfs [<flags>] <command> [<arg>] ...
SUBCOMMANDS
BASIC COMMANDS
init Initialize ipfs local configuration
add <path> Add a file to ipfs
cat <ref> Show ipfs object data
get <ref> Download ipfs objects
ls <ref> List links from an object
refs <ref> List hashes of links from an object
DATA STRUCTURE COMMANDS
block Interact with raw blocks in the datastore
object Interact with raw dag nodes
files Interact with objects as if they were a unix filesystem
ADVANCED COMMANDS
daemon Start a long-running daemon process
mount Mount an ipfs read-only mountpoint
resolve Resolve any type of name
name Publish or resolve IPNS names
dns Resolve DNS links
pin Pin objects to local storage
repo Manipulate an IPFS repository
NETWORK COMMANDS
id Show info about ipfs peers
bootstrap Add or remove bootstrap peers
swarm Manage connections to the p2p network
dht Query the DHT for values or peers
ping Measure the latency of a connection
diag Print diagnostics
TOOL COMMANDS
config Manage configuration
version Show ipfs version information
update Download and apply go-ipfs updates
commands List all available commands
Use 'ipfs <command> --help' to learn more about each command.
ipfs uses a repository in the local file system. By default, the repo is located
at ~/.ipfs. To change the repo location, set the $IPFS_PATH environment variable:
export IPFS_PATH=/path/to/ipfsrepo
Getting Started
See also: http://ipfs.io/docs/getting-started/
To start using IPFS, you must first initialize IPFS's config files on your
system, this is done with ipfs init. See ipfs init --help for information on
the optional arguments it takes. After initialization is complete, you can use
ipfs mount, ipfs add and any of the other commands to explore!
Some things to try
Basic proof of 'ipfs working' locally:
echo "hello world" > hello
ipfs add hello
# This should output a hash string that looks something like:
# QmT78zSuBmuS4z925WZfrqQ1qHaJ56DQaTfyMUF7F8ff5o
ipfs cat <that hash>
Docker usage
An IPFS docker image is hosted at hub.docker.com/r/ipfs/go-ipfs.
To make files visible inside the container you need to mount a host directory
with the -v option to docker. Choose a directory that you want to use to
import/export files from IPFS. You should also choose a directory to store
IPFS files that will persist when you restart the container.
export ipfs_staging=</absolute/path/to/somewhere/>
export ipfs_data=</absolute/path/to/somewhere_else/>
Make sure docker can access these folders:
sudo chmod -R 777 /absolute/path/to/somewhere/
sudo chmod -R 777 /absolute/path/to/somewhere_else/
Start a container running ipfs and expose ports 4001, 5001 and 8080:
docker run -d --name ipfs_host -v $ipfs_staging:/export -v $ipfs_data:/data/ipfs -p 8080:8080 -p 4001:4001 -p 5001:5001 ipfs/go-ipfs:latest
Watch the ipfs log:
docker logs -f ipfs_host
Wait for ipfs to start. ipfs is running when you see:
Gateway (readonly) server
listening on /ip4/0.0.0.0/tcp/8080
You can now stop watching the log.
Run ipfs commands:
docker exec ipfs_host ipfs <args...>
For example: connect to peers
docker exec ipfs_host ipfs swarm peers
Add files:
cp -r <something> $ipfs_staging
docker exec ipfs_host ipfs add -r /export/<something>
Stop the running container:
docker stop ipfs_host
Docker usage with VirtualBox/boot2docker (OSX and Windows)
Since docker is running in the boot2docker VM, you need to forward relevant ports from the VM to your host for IPFS to act normally. This is accomplished with the following command:
boot2docker ssh -L 5001:localhost:5001 -L 4001:localhost:4001 -L 8080:localhost:8080 -fN
Troubleshooting
If you have previously installed IPFS before and you are running into
problems getting a newer version to work, try deleting (or backing up somewhere
else) your IPFS config directory (~/.ipfs by default) and rerunning ipfs init.
This will reinitialize the config file to its defaults and clear out the local
datastore of any bad entries.
For any other problems, check the issues list and if you dont see your problem there, either come talk to us on irc (freenode #ipfs) or file an issue of your own!
Todo
An IPFS alpha version has been released in February 2015. Things left to be done are all marked as issues.
Contributing
Please see Contribute.md!
This repository falls under the IPFS Code of Conduct.
Want to hack on IPFS?
License
MIT
Documentation
¶
Overview ¶
IPFS is a global, versioned, peer-to-peer filesystem
There are sub-packages within the ipfs package for various low-level utilities, which are in turn assembled into:
core/...:
The low-level API that gives consumers all the knobs they need, which we try hard to keep stable.
shell/...:
The high-level API that gives consumers easy access to common operations (e.g. create a file node from a reader without wrapping with metadata). We work really hard to keep this stable.
Then on top of the core/... and shell/... Go APIs, we have:
cmd/...:
Command-line executables
test/...:
Integration tests, etc.
To avoid cyclic imports, imports should never pull in higher-level APIs into a lower-level package. For example, you could import all of core and shell from cmd/... or test/..., but you couldn't import any of shell from core/....
Source Files
Directories
¶
| Path | Synopsis |
|---|---|
|
Godeps
|
|
|
_workspace/src/bazil.org/fuse
Package fuse enables writing FUSE file systems on Linux, OS X, and FreeBSD.
|
Package fuse enables writing FUSE file systems on Linux, OS X, and FreeBSD. |
|
_workspace/src/bazil.org/fuse/fs/bench
Package bench contains benchmarks.
|
Package bench contains benchmarks. |
|
_workspace/src/bazil.org/fuse/hellofs
Hellofs implements a simple "hello world" file system.
|
Hellofs implements a simple "hello world" file system. |
|
_workspace/src/bazil.org/fuse/syscallx
Package syscallx provides wrappers that make syscalls on various platforms more interoperable.
|
Package syscallx provides wrappers that make syscalls on various platforms more interoperable. |
|
_workspace/src/github.com/briantigerchow/pubsub
Package pubsub implements a simple multi-topic pub-sub library.
|
Package pubsub implements a simple multi-topic pub-sub library. |
|
_workspace/src/github.com/hashicorp/golang-lru
This package provides a simple LRU cache.
|
This package provides a simple LRU cache. |
|
_workspace/src/github.com/jbenet/go-is-domain
Package isdomain package allows users to check whether strings represent domain names.
|
Package isdomain package allows users to check whether strings represent domain names. |
|
_workspace/src/github.com/whyrusleeping/chunker
Package chunker implements Content Defined Chunking (CDC) based on a rolling Rabin Checksum.
|
Package chunker implements Content Defined Chunking (CDC) based on a rolling Rabin Checksum. |
|
package blocks contains the lowest level of ipfs data structures, the raw block with a checksum.
|
package blocks contains the lowest level of ipfs data structures, the raw block with a checksum. |
|
blockstore
package blockstore implements a thin wrapper over a datastore, giving a clean interface for Getting and Putting block objects.
|
package blockstore implements a thin wrapper over a datastore, giving a clean interface for Getting and Putting block objects. |
|
bloom
package bloom implements a simple bloom filter.
|
package bloom implements a simple bloom filter. |
|
set
package set contains various different types of 'BlockSet's
|
package set contains various different types of 'BlockSet's |
|
package blockservice implements a BlockService interface that provides a single GetBlock/AddBlock interface that seamlessly retrieves data either locally or from a remote peer through the exchange.
|
package blockservice implements a BlockService interface that provides a single GetBlock/AddBlock interface that seamlessly retrieves data either locally or from a remote peer through the exchange. |
|
cmd
|
|
|
ipfs
cmd/ipfs implements the primary CLI binary for ipfs
|
cmd/ipfs implements the primary CLI binary for ipfs |
|
seccat
package main provides an implementation of netcat using the secio package.
|
package main provides an implementation of netcat using the secio package. |
|
Package core implements the IpfsNode object and related methods.
|
Package core implements the IpfsNode object and related methods. |
|
commands
Package commands implements the IPFS command interface Using github.com/ipfs/go-ipfs/commands to define the command line and HTTP APIs.
|
Package commands implements the IPFS command interface Using github.com/ipfs/go-ipfs/commands to define the command line and HTTP APIs. |
|
corehttp
Package corehttp provides utilities for the webui, gateways, and other high-level HTTP interfaces to IPFS.
|
Package corehttp provides utilities for the webui, gateways, and other high-level HTTP interfaces to IPFS. |
|
corerepo
Package corerepo provides pinning and garbage collection for local IPFS block services.
|
Package corerepo provides pinning and garbage collection for local IPFS block services. |
|
package diagnostics implements a network diagnostics service that allows a request to traverse the network and gather information on every node connected to it.
|
package diagnostics implements a network diagnostics service that allows a request to traverse the network and gather information on every node connected to it. |
|
pb
Package diagnostics_pb is a generated protocol buffer package.
|
Package diagnostics_pb is a generated protocol buffer package. |
|
package exchange defines the IPFS Exchange interface
|
package exchange defines the IPFS Exchange interface |
|
bitswap
package bitswap implements the IPFS Exchange interface with the BitSwap bilateral exchange protocol.
|
package bitswap implements the IPFS Exchange interface with the BitSwap bilateral exchange protocol. |
|
bitswap/decision
package decision implements the decision engine for the bitswap service.
|
package decision implements the decision engine for the bitswap service. |
|
bitswap/message/pb
Package bitswap_message_pb is a generated protocol buffer package.
|
Package bitswap_message_pb is a generated protocol buffer package. |
|
bitswap/wantlist
package wantlist implements an object for bitswap that contains the keys that a given peer wants.
|
package wantlist implements an object for bitswap that contains the keys that a given peer wants. |
|
offline
package offline implements an object that implements the exchange interface but returns nil values to every request.
|
package offline implements an object that implements the exchange interface but returns nil values to every request. |
|
fuse
|
|
|
ipns
package fuse/ipns implements a fuse filesystem that interfaces with ipns, the naming system for ipfs.
|
package fuse/ipns implements a fuse filesystem that interfaces with ipns, the naming system for ipfs. |
|
mount
package mount provides a simple abstraction around a mount point
|
package mount provides a simple abstraction around a mount point |
|
readonly
package fuse/readonly implements a fuse filesystem to access files stored inside of ipfs.
|
package fuse/readonly implements a fuse filesystem to access files stored inside of ipfs. |
|
package importer implements utilities used to create ipfs DAGs from files and readers
|
package importer implements utilities used to create ipfs DAGs from files and readers |
|
chunk
package chunk implements streaming block splitters
|
package chunk implements streaming block splitters |
|
package merkledag implements the ipfs Merkle DAG datastructures.
|
package merkledag implements the ipfs Merkle DAG datastructures. |
|
pb
Package merkledag_pb is a generated protocol buffer package.
|
Package merkledag_pb is a generated protocol buffer package. |
|
traverse
Package traverse provides merkledag traversal functions
|
Package traverse provides merkledag traversal functions |
|
package mfs implements an in memory model of a mutable ipfs filesystem.
|
package mfs implements an in memory model of a mutable ipfs filesystem. |
|
Package namesys implements resolvers and publishers for the IPFS naming system (IPNS).
|
Package namesys implements resolvers and publishers for the IPFS naming system (IPNS). |
|
pb
Package namesys_pb is a generated protocol buffer package.
|
Package namesys_pb is a generated protocol buffer package. |
|
Package path implements utilities for resolving paths within ipfs.
|
Package path implements utilities for resolving paths within ipfs. |
|
package pin implements structures and methods to keep track of which objects a user wants to keep stored locally.
|
package pin implements structures and methods to keep track of which objects a user wants to keep stored locally. |
|
internal/pb
Package pb is a generated protocol buffer package.
|
Package pb is a generated protocol buffer package. |
|
config
package config implements the ipfs config file datastructures and utilities.
|
package config implements the ipfs config file datastructures and utilities. |
|
fsrepo
package fsrepo TODO explain the package roadmap...
|
package fsrepo TODO explain the package roadmap... |
|
package routing defines the interface for a routing system used by ipfs.
|
package routing defines the interface for a routing system used by ipfs. |
|
dht
Package dht implements a distributed hash table that satisfies the ipfs routing interface.
|
Package dht implements a distributed hash table that satisfies the ipfs routing interface. |
|
dht/pb
Package dht_pb is a generated protocol buffer package.
|
Package dht_pb is a generated protocol buffer package. |
|
kbucket
package kbucket implements a kademlia 'k-bucket' routing table.
|
package kbucket implements a kademlia 'k-bucket' routing table. |
|
mock
Package mock provides a virtual routing server.
|
Package mock provides a virtual routing server. |
|
test
|
|
|
sharness/lib
package randomdep is here to introduce a dependency in random for godep to function properly.
|
package randomdep is here to introduce a dependency in random for godep to function properly. |
|
thirdparty
|
|
|
loggables
Package loggables includes a bunch of translator functions for commonplace/stdlib objects.
|
Package loggables includes a bunch of translator functions for commonplace/stdlib objects. |
|
notifier
Package notifier provides a simple notification dispatcher meant to be embedded in larger structres who wish to allow clients to sign up for event notifications.
|
Package notifier provides a simple notification dispatcher meant to be embedded in larger structres who wish to allow clients to sign up for event notifications. |
|
pollEndpoint
pollEndpoint is a helper utility that waits for a http endpoint to be reachable and return with http.StatusOK
|
pollEndpoint is a helper utility that waits for a http endpoint to be reachable and return with http.StatusOK |
|
testutil/ci
Package ci implements some helper functions to use during tests.
|
Package ci implements some helper functions to use during tests. |
|
testutil/ci/travis
Package travis implements some helper functions to use during tests.
|
Package travis implements some helper functions to use during tests. |
|
Package format implements a data format for files in the ipfs filesystem It is not the only format in ipfs, but it is the one that the filesystem assumes
|
Package format implements a data format for files in the ipfs filesystem It is not the only format in ipfs, but it is the one that the filesystem assumes |
|
io
package unixfs/io implements convenience objects for working with the ipfs unixfs data format.
|
package unixfs/io implements convenience objects for working with the ipfs unixfs data format. |
|
pb
Package unixfs_pb is a generated protocol buffer package.
|
Package unixfs_pb is a generated protocol buffer package. |