unifi

package
v0.1.0 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Oct 28, 2024 License: Apache-2.0 Imports: 7 Imported by: 0

Documentation

Overview

A Pulumi package for creating and managing Unifi network resources.

Index

Constants

This section is empty.

Variables

This section is empty.

Functions

This section is empty.

Types

type Account 

type Account struct {
	pulumi.CustomResourceState

	// The name of the account.
	Name pulumi.StringOutput `pulumi:"name"`
	// ID of the network for this account
	NetworkId pulumi.StringPtrOutput `pulumi:"networkId"`
	// The password of the account.
	Password pulumi.StringOutput `pulumi:"password"`
	// The name of the site to associate the account with.
	Site pulumi.StringOutput `pulumi:"site"`
	// See [RFC 2868](https://www.rfc-editor.org/rfc/rfc2868) section 3.2 Defaults to `6`.
	TunnelMediumType pulumi.IntPtrOutput `pulumi:"tunnelMediumType"`
	// See [RFC 2868](https://www.rfc-editor.org/rfc/rfc2868) section 3.1 Defaults to `13`.
	TunnelType pulumi.IntPtrOutput `pulumi:"tunnelType"`
}

`Account` manages a RADIUS user account

To authenticate devices based on MAC address, use the MAC address as the username and password under client creation. Convert lowercase letters to uppercase, and also remove colons or periods from the MAC address.

ATTENTION: If the user profile does not include a VLAN, the client will fall back to the untagged VLAN.

NOTE: MAC-based authentication accounts can only be used for wireless and wired clients. L2TP remote access does not apply.

func GetAccount 

func GetAccount(ctx *pulumi.Context,
	name string, id pulumi.IDInput, state *AccountState, opts ...pulumi.ResourceOption) (*Account, error)

GetAccount gets an existing Account resource's state with the given name, ID, and optional state properties that are used to uniquely qualify the lookup (nil if not required).

func NewAccount 

func NewAccount(ctx *pulumi.Context,
	name string, args *AccountArgs, opts ...pulumi.ResourceOption) (*Account, error)

NewAccount registers a new resource with the given unique name, arguments, and options.

func (*Account) ElementType 

func (*Account) ElementType() reflect.Type

func (*Account) ToAccountOutput 

func (i *Account) ToAccountOutput() AccountOutput

func (*Account) ToAccountOutputWithContext 

func (i *Account) ToAccountOutputWithContext(ctx context.Context) AccountOutput

type AccountArgs 

type AccountArgs struct {
	// The name of the account.
	Name pulumi.StringPtrInput
	// ID of the network for this account
	NetworkId pulumi.StringPtrInput
	// The password of the account.
	Password pulumi.StringInput
	// The name of the site to associate the account with.
	Site pulumi.StringPtrInput
	// See [RFC 2868](https://www.rfc-editor.org/rfc/rfc2868) section 3.2 Defaults to `6`.
	TunnelMediumType pulumi.IntPtrInput
	// See [RFC 2868](https://www.rfc-editor.org/rfc/rfc2868) section 3.1 Defaults to `13`.
	TunnelType pulumi.IntPtrInput
}

The set of arguments for constructing a Account resource.

func (AccountArgs) ElementType 

func (AccountArgs) ElementType() reflect.Type

type AccountArray 

type AccountArray []AccountInput

func (AccountArray) ElementType 

func (AccountArray) ElementType() reflect.Type

func (AccountArray) ToAccountArrayOutput 

func (i AccountArray) ToAccountArrayOutput() AccountArrayOutput

func (AccountArray) ToAccountArrayOutputWithContext 

func (i AccountArray) ToAccountArrayOutputWithContext(ctx context.Context) AccountArrayOutput

type AccountArrayInput 

type AccountArrayInput interface {
	pulumi.Input

	ToAccountArrayOutput() AccountArrayOutput
	ToAccountArrayOutputWithContext(context.Context) AccountArrayOutput
}

AccountArrayInput is an input type that accepts AccountArray and AccountArrayOutput values. You can construct a concrete instance of `AccountArrayInput` via: 

AccountArray{ AccountArgs{...} }

type AccountArrayOutput 

type AccountArrayOutput struct{ *pulumi.OutputState }

func (AccountArrayOutput) ElementType 

func (AccountArrayOutput) ElementType() reflect.Type

func (AccountArrayOutput) Index 

func (o AccountArrayOutput) Index(i pulumi.IntInput) AccountOutput

func (AccountArrayOutput) ToAccountArrayOutput 

func (o AccountArrayOutput) ToAccountArrayOutput() AccountArrayOutput

func (AccountArrayOutput) ToAccountArrayOutputWithContext 

func (o AccountArrayOutput) ToAccountArrayOutputWithContext(ctx context.Context) AccountArrayOutput

type AccountInput 

type AccountInput interface {
	pulumi.Input

	ToAccountOutput() AccountOutput
	ToAccountOutputWithContext(ctx context.Context) AccountOutput
}

type AccountMap 

type AccountMap map[string]AccountInput

func (AccountMap) ElementType 

func (AccountMap) ElementType() reflect.Type

func (AccountMap) ToAccountMapOutput 

func (i AccountMap) ToAccountMapOutput() AccountMapOutput

func (AccountMap) ToAccountMapOutputWithContext 

func (i AccountMap) ToAccountMapOutputWithContext(ctx context.Context) AccountMapOutput

type AccountMapInput 

type AccountMapInput interface {
	pulumi.Input

	ToAccountMapOutput() AccountMapOutput
	ToAccountMapOutputWithContext(context.Context) AccountMapOutput
}

AccountMapInput is an input type that accepts AccountMap and AccountMapOutput values. You can construct a concrete instance of `AccountMapInput` via: 

AccountMap{ "key": AccountArgs{...} }

type AccountMapOutput 

type AccountMapOutput struct{ *pulumi.OutputState }

func (AccountMapOutput) ElementType 

func (AccountMapOutput) ElementType() reflect.Type

func (AccountMapOutput) MapIndex 

func (o AccountMapOutput) MapIndex(k pulumi.StringInput) AccountOutput

func (AccountMapOutput) ToAccountMapOutput 

func (o AccountMapOutput) ToAccountMapOutput() AccountMapOutput

func (AccountMapOutput) ToAccountMapOutputWithContext 

func (o AccountMapOutput) ToAccountMapOutputWithContext(ctx context.Context) AccountMapOutput

type AccountOutput 

type AccountOutput struct{ *pulumi.OutputState }

func (AccountOutput) ElementType 

func (AccountOutput) ElementType() reflect.Type

func (AccountOutput) Name 

func (o AccountOutput) Name() pulumi.StringOutput

The name of the account.

func (AccountOutput) NetworkId 

func (o AccountOutput) NetworkId() pulumi.StringPtrOutput

ID of the network for this account

func (AccountOutput) Password 

func (o AccountOutput) Password() pulumi.StringOutput

The password of the account.

func (AccountOutput) Site 

func (o AccountOutput) Site() pulumi.StringOutput

The name of the site to associate the account with.

func (AccountOutput) ToAccountOutput 

func (o AccountOutput) ToAccountOutput() AccountOutput

func (AccountOutput) ToAccountOutputWithContext 

func (o AccountOutput) ToAccountOutputWithContext(ctx context.Context) AccountOutput

func (AccountOutput) TunnelMediumType 

func (o AccountOutput) TunnelMediumType() pulumi.IntPtrOutput

See [RFC 2868](https://www.rfc-editor.org/rfc/rfc2868) section 3.2 Defaults to `6`.

func (AccountOutput) TunnelType 

func (o AccountOutput) TunnelType() pulumi.IntPtrOutput

See [RFC 2868](https://www.rfc-editor.org/rfc/rfc2868) section 3.1 Defaults to `13`.

type AccountState 

type AccountState struct {
	// The name of the account.
	Name pulumi.StringPtrInput
	// ID of the network for this account
	NetworkId pulumi.StringPtrInput
	// The password of the account.
	Password pulumi.StringPtrInput
	// The name of the site to associate the account with.
	Site pulumi.StringPtrInput
	// See [RFC 2868](https://www.rfc-editor.org/rfc/rfc2868) section 3.2 Defaults to `6`.
	TunnelMediumType pulumi.IntPtrInput
	// See [RFC 2868](https://www.rfc-editor.org/rfc/rfc2868) section 3.1 Defaults to `13`.
	TunnelType pulumi.IntPtrInput
}

func (AccountState) ElementType 

func (AccountState) ElementType() reflect.Type

type Device 

type Device struct {
	pulumi.CustomResourceState

	// Specifies whether this resource should tell the controller to adopt the device on create. Defaults to `true`.
	AllowAdoption pulumi.BoolPtrOutput `pulumi:"allowAdoption"`
	// Specifies whether this device should be disabled.
	Disabled pulumi.BoolOutput `pulumi:"disabled"`
	// Specifies whether this resource should tell the controller to forget the device on destroy. Defaults to `true`.
	ForgetOnDestroy pulumi.BoolPtrOutput `pulumi:"forgetOnDestroy"`
	// The MAC address of the device. This can be specified so that the provider can take control of a device (since devices are created through adoption).
	Mac pulumi.StringOutput `pulumi:"mac"`
	// The name of the device.
	Name pulumi.StringOutput `pulumi:"name"`
	// Settings overrides for specific switch ports.
	PortOverrides DevicePortOverrideArrayOutput `pulumi:"portOverrides"`
	// The name of the site to associate the device with.
	Site pulumi.StringOutput `pulumi:"site"`
}

## Example Usage

```go package main

import ( 

"github.com/pulumi/pulumi/sdk/v3/go/pulumi"
"github.com/pulumiverse/pulumi-unifi/sdk/go/unifi"
"github.com/pulumiverse/pulumi-unifi/sdk/go/unifi/port"

) 

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		disabled, err := port.LookupProfile(ctx, &port.LookupProfileArgs{
			Name: pulumi.StringRef("Disabled"),
		}, nil)
		if err != nil {
			return err
		}
		poe, err := port.NewProfile(ctx, "poe", &port.ProfileArgs{
			Name:                pulumi.String("poe"),
			Forward:             pulumi.String("customize"),
			NativeNetworkconfId: pulumi.Any(nativeNetworkId),
			TaggedNetworkconfIds: pulumi.StringArray{
				someVlanNetworkId,
			},
			PoeMode: pulumi.String("auto"),
		})
		if err != nil {
			return err
		}
		_, err = unifi.NewDevice(ctx, "us_24_poe", &unifi.DeviceArgs{
			Mac:  pulumi.String("01:23:45:67:89:AB"),
			Name: pulumi.String("Switch with POE"),
			PortOverrides: unifi.DevicePortOverrideArray{
				&unifi.DevicePortOverrideArgs{
					Number:        pulumi.Int(1),
					Name:          pulumi.String("port w/ poe"),
					PortProfileId: poe.ID(),
				},
				&unifi.DevicePortOverrideArgs{
					Number:        pulumi.Int(2),
					Name:          pulumi.String("disabled"),
					PortProfileId: pulumi.String(disabled.Id),
				},
				&unifi.DevicePortOverrideArgs{
					Number:            pulumi.Int(11),
					OpMode:            pulumi.String("aggregate"),
					AggregateNumPorts: pulumi.Int(2),
				},
			},
		})
		if err != nil {
			return err
		}
		return nil
	})
}

```

func GetDevice 

func GetDevice(ctx *pulumi.Context,
	name string, id pulumi.IDInput, state *DeviceState, opts ...pulumi.ResourceOption) (*Device, error)

GetDevice gets an existing Device resource's state with the given name, ID, and optional state properties that are used to uniquely qualify the lookup (nil if not required).

func NewDevice 

func NewDevice(ctx *pulumi.Context,
	name string, args *DeviceArgs, opts ...pulumi.ResourceOption) (*Device, error)

NewDevice registers a new resource with the given unique name, arguments, and options.

func (*Device) ElementType 

func (*Device) ElementType() reflect.Type

func (*Device) ToDeviceOutput 

func (i *Device) ToDeviceOutput() DeviceOutput

func (*Device) ToDeviceOutputWithContext 

func (i *Device) ToDeviceOutputWithContext(ctx context.Context) DeviceOutput

type DeviceArgs 

type DeviceArgs struct {
	// Specifies whether this resource should tell the controller to adopt the device on create. Defaults to `true`.
	AllowAdoption pulumi.BoolPtrInput
	// Specifies whether this resource should tell the controller to forget the device on destroy. Defaults to `true`.
	ForgetOnDestroy pulumi.BoolPtrInput
	// The MAC address of the device. This can be specified so that the provider can take control of a device (since devices are created through adoption).
	Mac pulumi.StringPtrInput
	// The name of the device.
	Name pulumi.StringPtrInput
	// Settings overrides for specific switch ports.
	PortOverrides DevicePortOverrideArrayInput
	// The name of the site to associate the device with.
	Site pulumi.StringPtrInput
}

The set of arguments for constructing a Device resource.

func (DeviceArgs) ElementType 

func (DeviceArgs) ElementType() reflect.Type

type DeviceArray 

type DeviceArray []DeviceInput

func (DeviceArray) ElementType 

func (DeviceArray) ElementType() reflect.Type

func (DeviceArray) ToDeviceArrayOutput 

func (i DeviceArray) ToDeviceArrayOutput() DeviceArrayOutput

func (DeviceArray) ToDeviceArrayOutputWithContext 

func (i DeviceArray) ToDeviceArrayOutputWithContext(ctx context.Context) DeviceArrayOutput

type DeviceArrayInput 

type DeviceArrayInput interface {
	pulumi.Input

	ToDeviceArrayOutput() DeviceArrayOutput
	ToDeviceArrayOutputWithContext(context.Context) DeviceArrayOutput
}

DeviceArrayInput is an input type that accepts DeviceArray and DeviceArrayOutput values. You can construct a concrete instance of `DeviceArrayInput` via: 

DeviceArray{ DeviceArgs{...} }

type DeviceArrayOutput 

type DeviceArrayOutput struct{ *pulumi.OutputState }

func (DeviceArrayOutput) ElementType 

func (DeviceArrayOutput) ElementType() reflect.Type

func (DeviceArrayOutput) Index 

func (o DeviceArrayOutput) Index(i pulumi.IntInput) DeviceOutput

func (DeviceArrayOutput) ToDeviceArrayOutput 

func (o DeviceArrayOutput) ToDeviceArrayOutput() DeviceArrayOutput

func (DeviceArrayOutput) ToDeviceArrayOutputWithContext 

func (o DeviceArrayOutput) ToDeviceArrayOutputWithContext(ctx context.Context) DeviceArrayOutput

type DeviceInput 

type DeviceInput interface {
	pulumi.Input

	ToDeviceOutput() DeviceOutput
	ToDeviceOutputWithContext(ctx context.Context) DeviceOutput
}

type DeviceMap 

type DeviceMap map[string]DeviceInput

func (DeviceMap) ElementType 

func (DeviceMap) ElementType() reflect.Type

func (DeviceMap) ToDeviceMapOutput 

func (i DeviceMap) ToDeviceMapOutput() DeviceMapOutput

func (DeviceMap) ToDeviceMapOutputWithContext 

func (i DeviceMap) ToDeviceMapOutputWithContext(ctx context.Context) DeviceMapOutput

type DeviceMapInput 

type DeviceMapInput interface {
	pulumi.Input

	ToDeviceMapOutput() DeviceMapOutput
	ToDeviceMapOutputWithContext(context.Context) DeviceMapOutput
}

DeviceMapInput is an input type that accepts DeviceMap and DeviceMapOutput values. You can construct a concrete instance of `DeviceMapInput` via: 

DeviceMap{ "key": DeviceArgs{...} }

type DeviceMapOutput 

type DeviceMapOutput struct{ *pulumi.OutputState }

func (DeviceMapOutput) ElementType 

func (DeviceMapOutput) ElementType() reflect.Type

func (DeviceMapOutput) MapIndex 

func (o DeviceMapOutput) MapIndex(k pulumi.StringInput) DeviceOutput

func (DeviceMapOutput) ToDeviceMapOutput 

func (o DeviceMapOutput) ToDeviceMapOutput() DeviceMapOutput

func (DeviceMapOutput) ToDeviceMapOutputWithContext 

func (o DeviceMapOutput) ToDeviceMapOutputWithContext(ctx context.Context) DeviceMapOutput

type DeviceOutput 

type DeviceOutput struct{ *pulumi.OutputState }

func (DeviceOutput) AllowAdoption 

func (o DeviceOutput) AllowAdoption() pulumi.BoolPtrOutput

Specifies whether this resource should tell the controller to adopt the device on create. Defaults to `true`.

func (DeviceOutput) Disabled 

func (o DeviceOutput) Disabled() pulumi.BoolOutput

Specifies whether this device should be disabled.

func (DeviceOutput) ElementType 

func (DeviceOutput) ElementType() reflect.Type

func (DeviceOutput) ForgetOnDestroy 

func (o DeviceOutput) ForgetOnDestroy() pulumi.BoolPtrOutput

Specifies whether this resource should tell the controller to forget the device on destroy. Defaults to `true`.

func (DeviceOutput) Mac 

func (o DeviceOutput) Mac() pulumi.StringOutput

The MAC address of the device. This can be specified so that the provider can take control of a device (since devices are created through adoption).

func (DeviceOutput) Name 

func (o DeviceOutput) Name() pulumi.StringOutput

The name of the device.

func (DeviceOutput) PortOverrides 

func (o DeviceOutput) PortOverrides() DevicePortOverrideArrayOutput

Settings overrides for specific switch ports.

func (DeviceOutput) Site 

func (o DeviceOutput) Site() pulumi.StringOutput

The name of the site to associate the device with.

func (DeviceOutput) ToDeviceOutput 

func (o DeviceOutput) ToDeviceOutput() DeviceOutput

func (DeviceOutput) ToDeviceOutputWithContext 

func (o DeviceOutput) ToDeviceOutputWithContext(ctx context.Context) DeviceOutput

type DevicePortOverride 

type DevicePortOverride struct {
	// Number of ports in the aggregate.
	AggregateNumPorts *int `pulumi:"aggregateNumPorts"`
	// Human-readable name of the port.
	Name *string `pulumi:"name"`
	// Switch port number.
	Number int `pulumi:"number"`
	// Operating mode of the port, valid values are `switch`, `mirror`, and `aggregate`. Defaults to `switch`.
	OpMode *string `pulumi:"opMode"`
	// ID of the Port Profile used on this port.
	PortProfileId *string `pulumi:"portProfileId"`
}

type DevicePortOverrideArgs 

type DevicePortOverrideArgs struct {
	// Number of ports in the aggregate.
	AggregateNumPorts pulumi.IntPtrInput `pulumi:"aggregateNumPorts"`
	// Human-readable name of the port.
	Name pulumi.StringPtrInput `pulumi:"name"`
	// Switch port number.
	Number pulumi.IntInput `pulumi:"number"`
	// Operating mode of the port, valid values are `switch`, `mirror`, and `aggregate`. Defaults to `switch`.
	OpMode pulumi.StringPtrInput `pulumi:"opMode"`
	// ID of the Port Profile used on this port.
	PortProfileId pulumi.StringPtrInput `pulumi:"portProfileId"`
}

func (DevicePortOverrideArgs) ElementType 

func (DevicePortOverrideArgs) ElementType() reflect.Type

func (DevicePortOverrideArgs) ToDevicePortOverrideOutput 

func (i DevicePortOverrideArgs) ToDevicePortOverrideOutput() DevicePortOverrideOutput

func (DevicePortOverrideArgs) ToDevicePortOverrideOutputWithContext 

func (i DevicePortOverrideArgs) ToDevicePortOverrideOutputWithContext(ctx context.Context) DevicePortOverrideOutput

type DevicePortOverrideArray 

type DevicePortOverrideArray []DevicePortOverrideInput

func (DevicePortOverrideArray) ElementType 

func (DevicePortOverrideArray) ElementType() reflect.Type

func (DevicePortOverrideArray) ToDevicePortOverrideArrayOutput 

func (i DevicePortOverrideArray) ToDevicePortOverrideArrayOutput() DevicePortOverrideArrayOutput

func (DevicePortOverrideArray) ToDevicePortOverrideArrayOutputWithContext 

func (i DevicePortOverrideArray) ToDevicePortOverrideArrayOutputWithContext(ctx context.Context) DevicePortOverrideArrayOutput

type DevicePortOverrideArrayInput 

type DevicePortOverrideArrayInput interface {
	pulumi.Input

	ToDevicePortOverrideArrayOutput() DevicePortOverrideArrayOutput
	ToDevicePortOverrideArrayOutputWithContext(context.Context) DevicePortOverrideArrayOutput
}

DevicePortOverrideArrayInput is an input type that accepts DevicePortOverrideArray and DevicePortOverrideArrayOutput values. You can construct a concrete instance of `DevicePortOverrideArrayInput` via: 

DevicePortOverrideArray{ DevicePortOverrideArgs{...} }

type DevicePortOverrideArrayOutput 

type DevicePortOverrideArrayOutput struct{ *pulumi.OutputState }

func (DevicePortOverrideArrayOutput) ElementType 

func (DevicePortOverrideArrayOutput) ElementType() reflect.Type

func (DevicePortOverrideArrayOutput) Index 

func (o DevicePortOverrideArrayOutput) Index(i pulumi.IntInput) DevicePortOverrideOutput

func (DevicePortOverrideArrayOutput) ToDevicePortOverrideArrayOutput 

func (o DevicePortOverrideArrayOutput) ToDevicePortOverrideArrayOutput() DevicePortOverrideArrayOutput

func (DevicePortOverrideArrayOutput) ToDevicePortOverrideArrayOutputWithContext 

func (o DevicePortOverrideArrayOutput) ToDevicePortOverrideArrayOutputWithContext(ctx context.Context) DevicePortOverrideArrayOutput

type DevicePortOverrideInput 

type DevicePortOverrideInput interface {
	pulumi.Input

	ToDevicePortOverrideOutput() DevicePortOverrideOutput
	ToDevicePortOverrideOutputWithContext(context.Context) DevicePortOverrideOutput
}

DevicePortOverrideInput is an input type that accepts DevicePortOverrideArgs and DevicePortOverrideOutput values. You can construct a concrete instance of `DevicePortOverrideInput` via: 

DevicePortOverrideArgs{...}

type DevicePortOverrideOutput 

type DevicePortOverrideOutput struct{ *pulumi.OutputState }

func (DevicePortOverrideOutput) AggregateNumPorts 

func (o DevicePortOverrideOutput) AggregateNumPorts() pulumi.IntPtrOutput

Number of ports in the aggregate.

func (DevicePortOverrideOutput) ElementType 

func (DevicePortOverrideOutput) ElementType() reflect.Type

func (DevicePortOverrideOutput) Name 

func (o DevicePortOverrideOutput) Name() pulumi.StringPtrOutput

Human-readable name of the port.

func (DevicePortOverrideOutput) Number 

func (o DevicePortOverrideOutput) Number() pulumi.IntOutput

Switch port number.

func (DevicePortOverrideOutput) OpMode 

func (o DevicePortOverrideOutput) OpMode() pulumi.StringPtrOutput

Operating mode of the port, valid values are `switch`, `mirror`, and `aggregate`. Defaults to `switch`.

func (DevicePortOverrideOutput) PortProfileId 

func (o DevicePortOverrideOutput) PortProfileId() pulumi.StringPtrOutput

ID of the Port Profile used on this port.

func (DevicePortOverrideOutput) ToDevicePortOverrideOutput 

func (o DevicePortOverrideOutput) ToDevicePortOverrideOutput() DevicePortOverrideOutput

func (DevicePortOverrideOutput) ToDevicePortOverrideOutputWithContext 

func (o DevicePortOverrideOutput) ToDevicePortOverrideOutputWithContext(ctx context.Context) DevicePortOverrideOutput

type DeviceState 

type DeviceState struct {
	// Specifies whether this resource should tell the controller to adopt the device on create. Defaults to `true`.
	AllowAdoption pulumi.BoolPtrInput
	// Specifies whether this device should be disabled.
	Disabled pulumi.BoolPtrInput
	// Specifies whether this resource should tell the controller to forget the device on destroy. Defaults to `true`.
	ForgetOnDestroy pulumi.BoolPtrInput
	// The MAC address of the device. This can be specified so that the provider can take control of a device (since devices are created through adoption).
	Mac pulumi.StringPtrInput
	// The name of the device.
	Name pulumi.StringPtrInput
	// Settings overrides for specific switch ports.
	PortOverrides DevicePortOverrideArrayInput
	// The name of the site to associate the device with.
	Site pulumi.StringPtrInput
}

func (DeviceState) ElementType 

func (DeviceState) ElementType() reflect.Type

type DynamicDNS 

type DynamicDNS struct {
	pulumi.CustomResourceState

	// The host name to update in the dynamic DNS service.
	HostName pulumi.StringOutput `pulumi:"hostName"`
	// The interface for the dynamic DNS. Can be `wan` or `wan2`. Defaults to `wan`.
	Interface pulumi.StringPtrOutput `pulumi:"interface"`
	// The server for the dynamic DNS service.
	Login pulumi.StringPtrOutput `pulumi:"login"`
	// The server for the dynamic DNS service.
	Password pulumi.StringPtrOutput `pulumi:"password"`
	// The server for the dynamic DNS service.
	Server pulumi.StringPtrOutput `pulumi:"server"`
	// The Dynamic DNS service provider, various values are supported (for example `dyndns`, etc.).
	Service pulumi.StringOutput `pulumi:"service"`
	// The name of the site to associate the dynamic DNS with.
	Site pulumi.StringOutput `pulumi:"site"`
}

`DynamicDNS` manages dynamic DNS settings for different providers.

## Example Usage

```go package main

import ( 

"github.com/pulumi/pulumi/sdk/v3/go/pulumi"
"github.com/pulumiverse/pulumi-unifi/sdk/go/unifi"

) 

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		_, err := unifi.NewDynamicDNS(ctx, "test", &unifi.DynamicDNSArgs{
			Service:  pulumi.String("dyndns"),
			HostName: pulumi.String("my-network.example.com"),
			Server:   pulumi.String("domains.google.com"),
			Login:    pulumi.Any(dnsLogin),
			Password: pulumi.Any(dnsPassword),
		})
		if err != nil {
			return err
		}
		return nil
	})
}

```

func GetDynamicDNS 

func GetDynamicDNS(ctx *pulumi.Context,
	name string, id pulumi.IDInput, state *DynamicDNSState, opts ...pulumi.ResourceOption) (*DynamicDNS, error)

GetDynamicDNS gets an existing DynamicDNS resource's state with the given name, ID, and optional state properties that are used to uniquely qualify the lookup (nil if not required).

func NewDynamicDNS 

func NewDynamicDNS(ctx *pulumi.Context,
	name string, args *DynamicDNSArgs, opts ...pulumi.ResourceOption) (*DynamicDNS, error)

NewDynamicDNS registers a new resource with the given unique name, arguments, and options.

func (*DynamicDNS) ElementType 

func (*DynamicDNS) ElementType() reflect.Type

func (*DynamicDNS) ToDynamicDNSOutput 

func (i *DynamicDNS) ToDynamicDNSOutput() DynamicDNSOutput

func (*DynamicDNS) ToDynamicDNSOutputWithContext 

func (i *DynamicDNS) ToDynamicDNSOutputWithContext(ctx context.Context) DynamicDNSOutput

type DynamicDNSArgs 

type DynamicDNSArgs struct {
	// The host name to update in the dynamic DNS service.
	HostName pulumi.StringInput
	// The interface for the dynamic DNS. Can be `wan` or `wan2`. Defaults to `wan`.
	Interface pulumi.StringPtrInput
	// The server for the dynamic DNS service.
	Login pulumi.StringPtrInput
	// The server for the dynamic DNS service.
	Password pulumi.StringPtrInput
	// The server for the dynamic DNS service.
	Server pulumi.StringPtrInput
	// The Dynamic DNS service provider, various values are supported (for example `dyndns`, etc.).
	Service pulumi.StringInput
	// The name of the site to associate the dynamic DNS with.
	Site pulumi.StringPtrInput
}

The set of arguments for constructing a DynamicDNS resource.

func (DynamicDNSArgs) ElementType 

func (DynamicDNSArgs) ElementType() reflect.Type

type DynamicDNSArray 

type DynamicDNSArray []DynamicDNSInput

func (DynamicDNSArray) ElementType 

func (DynamicDNSArray) ElementType() reflect.Type

func (DynamicDNSArray) ToDynamicDNSArrayOutput 

func (i DynamicDNSArray) ToDynamicDNSArrayOutput() DynamicDNSArrayOutput

func (DynamicDNSArray) ToDynamicDNSArrayOutputWithContext 

func (i DynamicDNSArray) ToDynamicDNSArrayOutputWithContext(ctx context.Context) DynamicDNSArrayOutput

type DynamicDNSArrayInput 

type DynamicDNSArrayInput interface {
	pulumi.Input

	ToDynamicDNSArrayOutput() DynamicDNSArrayOutput
	ToDynamicDNSArrayOutputWithContext(context.Context) DynamicDNSArrayOutput
}

DynamicDNSArrayInput is an input type that accepts DynamicDNSArray and DynamicDNSArrayOutput values. You can construct a concrete instance of `DynamicDNSArrayInput` via: 

DynamicDNSArray{ DynamicDNSArgs{...} }

type DynamicDNSArrayOutput 

type DynamicDNSArrayOutput struct{ *pulumi.OutputState }

func (DynamicDNSArrayOutput) ElementType 

func (DynamicDNSArrayOutput) ElementType() reflect.Type

func (DynamicDNSArrayOutput) Index 

func (o DynamicDNSArrayOutput) Index(i pulumi.IntInput) DynamicDNSOutput

func (DynamicDNSArrayOutput) ToDynamicDNSArrayOutput 

func (o DynamicDNSArrayOutput) ToDynamicDNSArrayOutput() DynamicDNSArrayOutput

func (DynamicDNSArrayOutput) ToDynamicDNSArrayOutputWithContext 

func (o DynamicDNSArrayOutput) ToDynamicDNSArrayOutputWithContext(ctx context.Context) DynamicDNSArrayOutput

type DynamicDNSInput 

type DynamicDNSInput interface {
	pulumi.Input

	ToDynamicDNSOutput() DynamicDNSOutput
	ToDynamicDNSOutputWithContext(ctx context.Context) DynamicDNSOutput
}

type DynamicDNSMap 

type DynamicDNSMap map[string]DynamicDNSInput

func (DynamicDNSMap) ElementType 

func (DynamicDNSMap) ElementType() reflect.Type

func (DynamicDNSMap) ToDynamicDNSMapOutput 

func (i DynamicDNSMap) ToDynamicDNSMapOutput() DynamicDNSMapOutput

func (DynamicDNSMap) ToDynamicDNSMapOutputWithContext 

func (i DynamicDNSMap) ToDynamicDNSMapOutputWithContext(ctx context.Context) DynamicDNSMapOutput

type DynamicDNSMapInput 

type DynamicDNSMapInput interface {
	pulumi.Input

	ToDynamicDNSMapOutput() DynamicDNSMapOutput
	ToDynamicDNSMapOutputWithContext(context.Context) DynamicDNSMapOutput
}

DynamicDNSMapInput is an input type that accepts DynamicDNSMap and DynamicDNSMapOutput values. You can construct a concrete instance of `DynamicDNSMapInput` via: 

DynamicDNSMap{ "key": DynamicDNSArgs{...} }

type DynamicDNSMapOutput 

type DynamicDNSMapOutput struct{ *pulumi.OutputState }

func (DynamicDNSMapOutput) ElementType 

func (DynamicDNSMapOutput) ElementType() reflect.Type

func (DynamicDNSMapOutput) MapIndex 

func (o DynamicDNSMapOutput) MapIndex(k pulumi.StringInput) DynamicDNSOutput

func (DynamicDNSMapOutput) ToDynamicDNSMapOutput 

func (o DynamicDNSMapOutput) ToDynamicDNSMapOutput() DynamicDNSMapOutput

func (DynamicDNSMapOutput) ToDynamicDNSMapOutputWithContext 

func (o DynamicDNSMapOutput) ToDynamicDNSMapOutputWithContext(ctx context.Context) DynamicDNSMapOutput

type DynamicDNSOutput 

type DynamicDNSOutput struct{ *pulumi.OutputState }

func (DynamicDNSOutput) ElementType 

func (DynamicDNSOutput) ElementType() reflect.Type

func (DynamicDNSOutput) HostName 

func (o DynamicDNSOutput) HostName() pulumi.StringOutput

The host name to update in the dynamic DNS service.

func (DynamicDNSOutput) Interface 

func (o DynamicDNSOutput) Interface() pulumi.StringPtrOutput

The interface for the dynamic DNS. Can be `wan` or `wan2`. Defaults to `wan`.

func (DynamicDNSOutput) Login 

func (o DynamicDNSOutput) Login() pulumi.StringPtrOutput

The server for the dynamic DNS service.

func (DynamicDNSOutput) Password 

func (o DynamicDNSOutput) Password() pulumi.StringPtrOutput

The server for the dynamic DNS service.

func (DynamicDNSOutput) Server 

func (o DynamicDNSOutput) Server() pulumi.StringPtrOutput

The server for the dynamic DNS service.

func (DynamicDNSOutput) Service 

func (o DynamicDNSOutput) Service() pulumi.StringOutput

The Dynamic DNS service provider, various values are supported (for example `dyndns`, etc.).

func (DynamicDNSOutput) Site 

func (o DynamicDNSOutput) Site() pulumi.StringOutput

The name of the site to associate the dynamic DNS with.

func (DynamicDNSOutput) ToDynamicDNSOutput 

func (o DynamicDNSOutput) ToDynamicDNSOutput() DynamicDNSOutput

func (DynamicDNSOutput) ToDynamicDNSOutputWithContext 

func (o DynamicDNSOutput) ToDynamicDNSOutputWithContext(ctx context.Context) DynamicDNSOutput

type DynamicDNSState 

type DynamicDNSState struct {
	// The host name to update in the dynamic DNS service.
	HostName pulumi.StringPtrInput
	// The interface for the dynamic DNS. Can be `wan` or `wan2`. Defaults to `wan`.
	Interface pulumi.StringPtrInput
	// The server for the dynamic DNS service.
	Login pulumi.StringPtrInput
	// The server for the dynamic DNS service.
	Password pulumi.StringPtrInput
	// The server for the dynamic DNS service.
	Server pulumi.StringPtrInput
	// The Dynamic DNS service provider, various values are supported (for example `dyndns`, etc.).
	Service pulumi.StringPtrInput
	// The name of the site to associate the dynamic DNS with.
	Site pulumi.StringPtrInput
}

func (DynamicDNSState) ElementType 

func (DynamicDNSState) ElementType() reflect.Type

type GetApGroupArgs 

type GetApGroupArgs struct {
	// The name of the AP group to look up, leave blank to look up the default AP group.
	Name *string `pulumi:"name"`
	// The name of the site the AP group is associated with.
	Site *string `pulumi:"site"`
}

A collection of arguments for invoking getApGroup.

type GetApGroupOutputArgs 

type GetApGroupOutputArgs struct {
	// The name of the AP group to look up, leave blank to look up the default AP group.
	Name pulumi.StringPtrInput `pulumi:"name"`
	// The name of the site the AP group is associated with.
	Site pulumi.StringPtrInput `pulumi:"site"`
}

A collection of arguments for invoking getApGroup.

func (GetApGroupOutputArgs) ElementType 

func (GetApGroupOutputArgs) ElementType() reflect.Type

type GetApGroupResult 

type GetApGroupResult struct {
	// The ID of this AP group.
	Id string `pulumi:"id"`
	// The name of the AP group to look up, leave blank to look up the default AP group.
	Name *string `pulumi:"name"`
	// The name of the site the AP group is associated with.
	Site string `pulumi:"site"`
}

A collection of values returned by getApGroup.

func GetApGroup 

func GetApGroup(ctx *pulumi.Context, args *GetApGroupArgs, opts ...pulumi.InvokeOption) (*GetApGroupResult, error)

`getApGroup` data source can be used to retrieve the ID for an AP group by name.

## Example Usage

```go package main

import ( 

"github.com/pulumi/pulumi/sdk/v3/go/pulumi"
"github.com/pulumiverse/pulumi-unifi/sdk/go/unifi"

) 

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		_, err := unifi.GetApGroup(ctx, nil, nil)
		if err != nil {
			return err
		}
		return nil
	})
}

```

type GetApGroupResultOutput 

type GetApGroupResultOutput struct{ *pulumi.OutputState }

A collection of values returned by getApGroup.

func GetApGroupOutput 

func GetApGroupOutput(ctx *pulumi.Context, args GetApGroupOutputArgs, opts ...pulumi.InvokeOption) GetApGroupResultOutput

func (GetApGroupResultOutput) ElementType 

func (GetApGroupResultOutput) ElementType() reflect.Type

func (GetApGroupResultOutput) Id 

func (o GetApGroupResultOutput) Id() pulumi.StringOutput

The ID of this AP group.

func (GetApGroupResultOutput) Name 

func (o GetApGroupResultOutput) Name() pulumi.StringPtrOutput

The name of the AP group to look up, leave blank to look up the default AP group.

func (GetApGroupResultOutput) Site 

func (o GetApGroupResultOutput) Site() pulumi.StringOutput

The name of the site the AP group is associated with.

func (GetApGroupResultOutput) ToGetApGroupResultOutput 

func (o GetApGroupResultOutput) ToGetApGroupResultOutput() GetApGroupResultOutput

func (GetApGroupResultOutput) ToGetApGroupResultOutputWithContext 

func (o GetApGroupResultOutput) ToGetApGroupResultOutputWithContext(ctx context.Context) GetApGroupResultOutput

type LookupAccountArgs 

type LookupAccountArgs struct {
	// The name of the account to look up
	Name string `pulumi:"name"`
	// The name of the site the account is associated with.
	Site *string `pulumi:"site"`
}

A collection of arguments for invoking getAccount.

type LookupAccountOutputArgs 

type LookupAccountOutputArgs struct {
	// The name of the account to look up
	Name pulumi.StringInput `pulumi:"name"`
	// The name of the site the account is associated with.
	Site pulumi.StringPtrInput `pulumi:"site"`
}

A collection of arguments for invoking getAccount.

func (LookupAccountOutputArgs) ElementType 

func (LookupAccountOutputArgs) ElementType() reflect.Type

type LookupAccountResult 

type LookupAccountResult struct {
	// The ID of this account.
	Id string `pulumi:"id"`
	// The name of the account to look up
	Name string `pulumi:"name"`
	// ID of the network for this account
	NetworkId string `pulumi:"networkId"`
	// The password of the account.
	Password string `pulumi:"password"`
	// The name of the site the account is associated with.
	Site string `pulumi:"site"`
	// See RFC2868 section 3.2
	TunnelMediumType int `pulumi:"tunnelMediumType"`
	// See RFC2868 section 3.1
	TunnelType int `pulumi:"tunnelType"`
}

A collection of values returned by getAccount.

func LookupAccount 

func LookupAccount(ctx *pulumi.Context, args *LookupAccountArgs, opts ...pulumi.InvokeOption) (*LookupAccountResult, error)

`Account` data source can be used to retrieve RADIUS user accounts

type LookupAccountResultOutput 

type LookupAccountResultOutput struct{ *pulumi.OutputState }

A collection of values returned by getAccount.

func LookupAccountOutput 

func LookupAccountOutput(ctx *pulumi.Context, args LookupAccountOutputArgs, opts ...pulumi.InvokeOption) LookupAccountResultOutput

func (LookupAccountResultOutput) ElementType 

func (LookupAccountResultOutput) ElementType() reflect.Type

func (LookupAccountResultOutput) Id 

func (o LookupAccountResultOutput) Id() pulumi.StringOutput

The ID of this account.

func (LookupAccountResultOutput) Name 

func (o LookupAccountResultOutput) Name() pulumi.StringOutput

The name of the account to look up

func (LookupAccountResultOutput) NetworkId 

func (o LookupAccountResultOutput) NetworkId() pulumi.StringOutput

ID of the network for this account

func (LookupAccountResultOutput) Password 

func (o LookupAccountResultOutput) Password() pulumi.StringOutput

The password of the account.

func (LookupAccountResultOutput) Site 

func (o LookupAccountResultOutput) Site() pulumi.StringOutput

The name of the site the account is associated with.

func (LookupAccountResultOutput) ToLookupAccountResultOutput 

func (o LookupAccountResultOutput) ToLookupAccountResultOutput() LookupAccountResultOutput

func (LookupAccountResultOutput) ToLookupAccountResultOutputWithContext 

func (o LookupAccountResultOutput) ToLookupAccountResultOutputWithContext(ctx context.Context) LookupAccountResultOutput

func (LookupAccountResultOutput) TunnelMediumType 

func (o LookupAccountResultOutput) TunnelMediumType() pulumi.IntOutput

See RFC2868 section 3.2

func (LookupAccountResultOutput) TunnelType 

func (o LookupAccountResultOutput) TunnelType() pulumi.IntOutput

See RFC2868 section 3.1

type LookupNetworkArgs 

type LookupNetworkArgs struct {
	// The ID of the network.
	Id *string `pulumi:"id"`
	// The name of the network.
	Name *string `pulumi:"name"`
	// The name of the site to associate the network with.
	Site *string `pulumi:"site"`
}

A collection of arguments for invoking getNetwork.

type LookupNetworkOutputArgs 

type LookupNetworkOutputArgs struct {
	// The ID of the network.
	Id pulumi.StringPtrInput `pulumi:"id"`
	// The name of the network.
	Name pulumi.StringPtrInput `pulumi:"name"`
	// The name of the site to associate the network with.
	Site pulumi.StringPtrInput `pulumi:"site"`
}

A collection of arguments for invoking getNetwork.

func (LookupNetworkOutputArgs) ElementType 

func (LookupNetworkOutputArgs) ElementType() reflect.Type

type LookupNetworkResult 

type LookupNetworkResult struct {
	// IPv4 addresses for the DNS server to be returned from the DHCP server.
	DhcpDns []string `pulumi:"dhcpDns"`
	// whether DHCP is enabled or not on this network.
	DhcpEnabled bool `pulumi:"dhcpEnabled"`
	// lease time for DHCP addresses.
	DhcpLease int `pulumi:"dhcpLease"`
	// The IPv4 address where the DHCP range of addresses starts.
	DhcpStart string `pulumi:"dhcpStart"`
	// The IPv4 address where the DHCP range of addresses stops.
	DhcpStop string `pulumi:"dhcpStop"`
	// Specifies the IPv6 addresses for the DNS server to be returned from the DHCP server. Used if `dhcpV6DnsAuto` is set to `false`.
	DhcpV6Dns []string `pulumi:"dhcpV6Dns"`
	// Specifies DNS source to propagate. If set `false` the entries in `dhcpV6Dns` are used, the upstream entries otherwise
	DhcpV6DnsAuto bool `pulumi:"dhcpV6DnsAuto"`
	// Enable stateful DHCPv6 for static configuration.
	DhcpV6Enabled bool `pulumi:"dhcpV6Enabled"`
	// Specifies the lease time for DHCPv6 addresses.
	DhcpV6Lease int `pulumi:"dhcpV6Lease"`
	// Start address of the DHCPv6 range. Used in static DHCPv6 configuration.
	DhcpV6Start string `pulumi:"dhcpV6Start"`
	// End address of the DHCPv6 range. Used in static DHCPv6 configuration.
	DhcpV6Stop string `pulumi:"dhcpV6Stop"`
	// Toggles on the DHCP boot options. will be set to true if you have dhcpd*boot*filename, and dhcpd*boot*server set.
	DhcpdBootEnabled bool `pulumi:"dhcpdBootEnabled"`
	// the file to PXE boot from on the dhcpd*boot*server.
	DhcpdBootFilename string `pulumi:"dhcpdBootFilename"`
	// IPv4 address of a TFTP server to network boot from.
	DhcpdBootServer string `pulumi:"dhcpdBootServer"`
	// The domain name of this network.
	DomainName string `pulumi:"domainName"`
	// The ID of the network.
	Id string `pulumi:"id"`
	// Specifies whether IGMP snooping is enabled or not.
	IgmpSnooping bool `pulumi:"igmpSnooping"`
	// Specifies which type of IPv6 connection to use. Must be one of either `static`, `pd`, or `none`.
	Ipv6InterfaceType string `pulumi:"ipv6InterfaceType"`
	// Specifies which WAN interface to use for IPv6 PD. Must be one of either `wan` or `wan2`.
	Ipv6PdInterface string `pulumi:"ipv6PdInterface"`
	// Specifies the IPv6 Prefix ID.
	Ipv6PdPrefixid string `pulumi:"ipv6PdPrefixid"`
	// Start address of the DHCPv6 range. Used if `ipv6InterfaceType` is set to `pd`.
	Ipv6PdStart string `pulumi:"ipv6PdStart"`
	// End address of the DHCPv6 range. Used if `ipv6InterfaceType` is set to `pd`.
	Ipv6PdStop string `pulumi:"ipv6PdStop"`
	// Specifies whether to enable router advertisements or not.
	Ipv6RaEnable bool `pulumi:"ipv6RaEnable"`
	// Lifetime in which the address can be used. Address becomes deprecated afterwards. Must be lower than or equal to `ipv6RaValidLifetime`
	Ipv6RaPreferredLifetime int `pulumi:"ipv6RaPreferredLifetime"`
	// IPv6 router advertisement priority. Must be one of either `high`, `medium`, or `low`
	Ipv6RaPriority string `pulumi:"ipv6RaPriority"`
	// Total lifetime in which the address can be used. Must be equal to or greater than `ipv6RaPreferredLifetime`.
	Ipv6RaValidLifetime int `pulumi:"ipv6RaValidLifetime"`
	// Specifies the static IPv6 subnet (when ipv6*interface*type is 'static').
	Ipv6StaticSubnet string `pulumi:"ipv6StaticSubnet"`
	// Specifies whether Multicast DNS (mDNS) is enabled or not on the network (Controller >=v7).
	MulticastDns bool `pulumi:"multicastDns"`
	// The name of the network.
	Name string `pulumi:"name"`
	// The group of the network.
	NetworkGroup string `pulumi:"networkGroup"`
	// The purpose of the network. One of `corporate`, `guest`, `wan`, or `vlan-only`.
	Purpose string `pulumi:"purpose"`
	// The name of the site to associate the network with.
	Site string `pulumi:"site"`
	// The subnet of the network (CIDR address).
	Subnet string `pulumi:"subnet"`
	// The VLAN ID of the network.
	VlanId int `pulumi:"vlanId"`
	// Specifies the IPv6 prefix size to request from ISP. Must be a number between 48 and 64.
	WanDhcpV6PdSize int `pulumi:"wanDhcpV6PdSize"`
	// DNS servers IPs of the WAN.
	WanDns []string `pulumi:"wanDns"`
	// Specifies the WAN egress quality of service.
	WanEgressQos int `pulumi:"wanEgressQos"`
	// The IPv4 gateway of the WAN.
	WanGateway string `pulumi:"wanGateway"`
	// The IPv6 gateway of the WAN.
	WanGatewayV6 string `pulumi:"wanGatewayV6"`
	// The IPv4 address of the WAN.
	WanIp string `pulumi:"wanIp"`
	// The IPv6 address of the WAN.
	WanIpv6 string `pulumi:"wanIpv6"`
	// The IPv4 netmask of the WAN.
	WanNetmask string `pulumi:"wanNetmask"`
	// Specifies the WAN network group. One of either `WAN`, `WAN2` or `WAN_LTE_FAILOVER`.
	WanNetworkgroup string `pulumi:"wanNetworkgroup"`
	// The IPv6 prefix length of the WAN. Must be between 1 and 128.
	WanPrefixlen int `pulumi:"wanPrefixlen"`
	// Specifies the IPV4 WAN connection type. One of either `disabled`, `static`, `dhcp`, or `pppoe`.
	WanType string `pulumi:"wanType"`
	// Specifies the IPV6 WAN connection type. Must be one of either `disabled`, `static`, or `dhcpv6`.
	WanTypeV6 string `pulumi:"wanTypeV6"`
	// Specifies the IPV4 WAN username.
	WanUsername string `pulumi:"wanUsername"`
	// Specifies the IPV4 WAN password.
	XWanPassword string `pulumi:"xWanPassword"`
}

A collection of values returned by getNetwork.

func LookupNetwork 

func LookupNetwork(ctx *pulumi.Context, args *LookupNetworkArgs, opts ...pulumi.InvokeOption) (*LookupNetworkResult, error)

`Network` data source can be used to retrieve settings for a network by name or ID.

## Example Usage

```go package main

import ( 

"github.com/pulumi/pulumi/sdk/v3/go/pulumi"
"github.com/pulumiverse/pulumi-unifi/sdk/go/unifi"
"github.com/pulumiverse/pulumi-unifi/sdk/go/unifi/iam"

) 

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		// retrieve network data by unifi network name
		_, err := unifi.LookupNetwork(ctx, &unifi.LookupNetworkArgs{
			Name: pulumi.StringRef("Default"),
		}, nil)
		if err != nil {
			return err
		}
		// retrieve network data from user record
		myDevice, err := iam.LookupUser(ctx, &iam.LookupUserArgs{
			Mac: "01:23:45:67:89:ab",
		}, nil)
		if err != nil {
			return err
		}
		_, err = unifi.LookupNetwork(ctx, &unifi.LookupNetworkArgs{
			Id: pulumi.StringRef(myDevice.NetworkId),
		}, nil)
		if err != nil {
			return err
		}
		return nil
	})
}

```

type LookupNetworkResultOutput 

type LookupNetworkResultOutput struct{ *pulumi.OutputState }

A collection of values returned by getNetwork.

func LookupNetworkOutput 

func LookupNetworkOutput(ctx *pulumi.Context, args LookupNetworkOutputArgs, opts ...pulumi.InvokeOption) LookupNetworkResultOutput

func (LookupNetworkResultOutput) DhcpDns 

func (o LookupNetworkResultOutput) DhcpDns() pulumi.StringArrayOutput

IPv4 addresses for the DNS server to be returned from the DHCP server.

func (LookupNetworkResultOutput) DhcpEnabled 

func (o LookupNetworkResultOutput) DhcpEnabled() pulumi.BoolOutput

whether DHCP is enabled or not on this network.

func (LookupNetworkResultOutput) DhcpLease 

func (o LookupNetworkResultOutput) DhcpLease() pulumi.IntOutput

lease time for DHCP addresses.

func (LookupNetworkResultOutput) DhcpStart 

func (o LookupNetworkResultOutput) DhcpStart() pulumi.StringOutput

The IPv4 address where the DHCP range of addresses starts.

func (LookupNetworkResultOutput) DhcpStop 

func (o LookupNetworkResultOutput) DhcpStop() pulumi.StringOutput

The IPv4 address where the DHCP range of addresses stops.

func (LookupNetworkResultOutput) DhcpV6Dns 

func (o LookupNetworkResultOutput) DhcpV6Dns() pulumi.StringArrayOutput

Specifies the IPv6 addresses for the DNS server to be returned from the DHCP server. Used if `dhcpV6DnsAuto` is set to `false`.

func (LookupNetworkResultOutput) DhcpV6DnsAuto 

func (o LookupNetworkResultOutput) DhcpV6DnsAuto() pulumi.BoolOutput

Specifies DNS source to propagate. If set `false` the entries in `dhcpV6Dns` are used, the upstream entries otherwise

func (LookupNetworkResultOutput) DhcpV6Enabled 

func (o LookupNetworkResultOutput) DhcpV6Enabled() pulumi.BoolOutput

Enable stateful DHCPv6 for static configuration.

func (LookupNetworkResultOutput) DhcpV6Lease 

func (o LookupNetworkResultOutput) DhcpV6Lease() pulumi.IntOutput

Specifies the lease time for DHCPv6 addresses.

func (LookupNetworkResultOutput) DhcpV6Start 

func (o LookupNetworkResultOutput) DhcpV6Start() pulumi.StringOutput

Start address of the DHCPv6 range. Used in static DHCPv6 configuration.

func (LookupNetworkResultOutput) DhcpV6Stop 

func (o LookupNetworkResultOutput) DhcpV6Stop() pulumi.StringOutput

End address of the DHCPv6 range. Used in static DHCPv6 configuration.

func (LookupNetworkResultOutput) DhcpdBootEnabled 

func (o LookupNetworkResultOutput) DhcpdBootEnabled() pulumi.BoolOutput

Toggles on the DHCP boot options. will be set to true if you have dhcpd*boot*filename, and dhcpd*boot*server set.

func (LookupNetworkResultOutput) DhcpdBootFilename 

func (o LookupNetworkResultOutput) DhcpdBootFilename() pulumi.StringOutput

the file to PXE boot from on the dhcpd*boot*server.

func (LookupNetworkResultOutput) DhcpdBootServer 

func (o LookupNetworkResultOutput) DhcpdBootServer() pulumi.StringOutput

IPv4 address of a TFTP server to network boot from.

func (LookupNetworkResultOutput) DomainName 

func (o LookupNetworkResultOutput) DomainName() pulumi.StringOutput

The domain name of this network.

func (LookupNetworkResultOutput) ElementType 

func (LookupNetworkResultOutput) ElementType() reflect.Type

func (LookupNetworkResultOutput) Id 

func (o LookupNetworkResultOutput) Id() pulumi.StringOutput

The ID of the network.

func (LookupNetworkResultOutput) IgmpSnooping 

func (o LookupNetworkResultOutput) IgmpSnooping() pulumi.BoolOutput

Specifies whether IGMP snooping is enabled or not.

func (LookupNetworkResultOutput) Ipv6InterfaceType 

func (o LookupNetworkResultOutput) Ipv6InterfaceType() pulumi.StringOutput

Specifies which type of IPv6 connection to use. Must be one of either `static`, `pd`, or `none`.

func (LookupNetworkResultOutput) Ipv6PdInterface 

func (o LookupNetworkResultOutput) Ipv6PdInterface() pulumi.StringOutput

Specifies which WAN interface to use for IPv6 PD. Must be one of either `wan` or `wan2`.

func (LookupNetworkResultOutput) Ipv6PdPrefixid 

func (o LookupNetworkResultOutput) Ipv6PdPrefixid() pulumi.StringOutput

Specifies the IPv6 Prefix ID.

func (LookupNetworkResultOutput) Ipv6PdStart 

func (o LookupNetworkResultOutput) Ipv6PdStart() pulumi.StringOutput

Start address of the DHCPv6 range. Used if `ipv6InterfaceType` is set to `pd`.

func (LookupNetworkResultOutput) Ipv6PdStop 

func (o LookupNetworkResultOutput) Ipv6PdStop() pulumi.StringOutput

End address of the DHCPv6 range. Used if `ipv6InterfaceType` is set to `pd`.

func (LookupNetworkResultOutput) Ipv6RaEnable 

func (o LookupNetworkResultOutput) Ipv6RaEnable() pulumi.BoolOutput

Specifies whether to enable router advertisements or not.

func (LookupNetworkResultOutput) Ipv6RaPreferredLifetime 

func (o LookupNetworkResultOutput) Ipv6RaPreferredLifetime() pulumi.IntOutput

Lifetime in which the address can be used. Address becomes deprecated afterwards. Must be lower than or equal to `ipv6RaValidLifetime`

func (LookupNetworkResultOutput) Ipv6RaPriority 

func (o LookupNetworkResultOutput) Ipv6RaPriority() pulumi.StringOutput

IPv6 router advertisement priority. Must be one of either `high`, `medium`, or `low`

func (LookupNetworkResultOutput) Ipv6RaValidLifetime 

func (o LookupNetworkResultOutput) Ipv6RaValidLifetime() pulumi.IntOutput

Total lifetime in which the address can be used. Must be equal to or greater than `ipv6RaPreferredLifetime`.

func (LookupNetworkResultOutput) Ipv6StaticSubnet 

func (o LookupNetworkResultOutput) Ipv6StaticSubnet() pulumi.StringOutput

Specifies the static IPv6 subnet (when ipv6*interface*type is 'static').

func (LookupNetworkResultOutput) MulticastDns 

func (o LookupNetworkResultOutput) MulticastDns() pulumi.BoolOutput

Specifies whether Multicast DNS (mDNS) is enabled or not on the network (Controller >=v7).

func (LookupNetworkResultOutput) Name 

func (o LookupNetworkResultOutput) Name() pulumi.StringOutput

The name of the network.

func (LookupNetworkResultOutput) NetworkGroup 

func (o LookupNetworkResultOutput) NetworkGroup() pulumi.StringOutput

The group of the network.

func (LookupNetworkResultOutput) Purpose 

func (o LookupNetworkResultOutput) Purpose() pulumi.StringOutput

The purpose of the network. One of `corporate`, `guest`, `wan`, or `vlan-only`.

func (LookupNetworkResultOutput) Site 

func (o LookupNetworkResultOutput) Site() pulumi.StringOutput

The name of the site to associate the network with.

func (LookupNetworkResultOutput) Subnet 

func (o LookupNetworkResultOutput) Subnet() pulumi.StringOutput

The subnet of the network (CIDR address).

func (LookupNetworkResultOutput) ToLookupNetworkResultOutput 

func (o LookupNetworkResultOutput) ToLookupNetworkResultOutput() LookupNetworkResultOutput

func (LookupNetworkResultOutput) ToLookupNetworkResultOutputWithContext 

func (o LookupNetworkResultOutput) ToLookupNetworkResultOutputWithContext(ctx context.Context) LookupNetworkResultOutput

func (LookupNetworkResultOutput) VlanId 

func (o LookupNetworkResultOutput) VlanId() pulumi.IntOutput

The VLAN ID of the network.

func (LookupNetworkResultOutput) WanDhcpV6PdSize 

func (o LookupNetworkResultOutput) WanDhcpV6PdSize() pulumi.IntOutput

Specifies the IPv6 prefix size to request from ISP. Must be a number between 48 and 64.

func (LookupNetworkResultOutput) WanDns 

func (o LookupNetworkResultOutput) WanDns() pulumi.StringArrayOutput

DNS servers IPs of the WAN.

func (LookupNetworkResultOutput) WanEgressQos 

func (o LookupNetworkResultOutput) WanEgressQos() pulumi.IntOutput

Specifies the WAN egress quality of service.

func (LookupNetworkResultOutput) WanGateway 

func (o LookupNetworkResultOutput) WanGateway() pulumi.StringOutput

The IPv4 gateway of the WAN.

func (LookupNetworkResultOutput) WanGatewayV6 

func (o LookupNetworkResultOutput) WanGatewayV6() pulumi.StringOutput

The IPv6 gateway of the WAN.

func (LookupNetworkResultOutput) WanIp 

func (o LookupNetworkResultOutput) WanIp() pulumi.StringOutput

The IPv4 address of the WAN.

func (LookupNetworkResultOutput) WanIpv6 

func (o LookupNetworkResultOutput) WanIpv6() pulumi.StringOutput

The IPv6 address of the WAN.

func (LookupNetworkResultOutput) WanNetmask 

func (o LookupNetworkResultOutput) WanNetmask() pulumi.StringOutput

The IPv4 netmask of the WAN.

func (LookupNetworkResultOutput) WanNetworkgroup 

func (o LookupNetworkResultOutput) WanNetworkgroup() pulumi.StringOutput

Specifies the WAN network group. One of either `WAN`, `WAN2` or `WAN_LTE_FAILOVER`.

func (LookupNetworkResultOutput) WanPrefixlen 

func (o LookupNetworkResultOutput) WanPrefixlen() pulumi.IntOutput

The IPv6 prefix length of the WAN. Must be between 1 and 128.

func (LookupNetworkResultOutput) WanType 

func (o LookupNetworkResultOutput) WanType() pulumi.StringOutput

Specifies the IPV4 WAN connection type. One of either `disabled`, `static`, `dhcp`, or `pppoe`.

func (LookupNetworkResultOutput) WanTypeV6 

func (o LookupNetworkResultOutput) WanTypeV6() pulumi.StringOutput

Specifies the IPV6 WAN connection type. Must be one of either `disabled`, `static`, or `dhcpv6`.

func (LookupNetworkResultOutput) WanUsername 

func (o LookupNetworkResultOutput) WanUsername() pulumi.StringOutput

Specifies the IPV4 WAN username.

func (LookupNetworkResultOutput) XWanPassword 

func (o LookupNetworkResultOutput) XWanPassword() pulumi.StringOutput

Specifies the IPV4 WAN password.

type LookupRadiusProfileArgs 

type LookupRadiusProfileArgs struct {
	// The name of the RADIUS profile to look up. Defaults to `Default`.
	Name *string `pulumi:"name"`
	// The name of the site the RADIUS profile is associated with.
	Site *string `pulumi:"site"`
}

A collection of arguments for invoking getRadiusProfile.

type LookupRadiusProfileOutputArgs 

type LookupRadiusProfileOutputArgs struct {
	// The name of the RADIUS profile to look up. Defaults to `Default`.
	Name pulumi.StringPtrInput `pulumi:"name"`
	// The name of the site the RADIUS profile is associated with.
	Site pulumi.StringPtrInput `pulumi:"site"`
}

A collection of arguments for invoking getRadiusProfile.

func (LookupRadiusProfileOutputArgs) ElementType 

func (LookupRadiusProfileOutputArgs) ElementType() reflect.Type

type LookupRadiusProfileResult 

type LookupRadiusProfileResult struct {
	// The ID of this AP group.
	Id string `pulumi:"id"`
	// The name of the RADIUS profile to look up. Defaults to `Default`.
	Name *string `pulumi:"name"`
	// The name of the site the RADIUS profile is associated with.
	Site string `pulumi:"site"`
}

A collection of values returned by getRadiusProfile.

func LookupRadiusProfile 

func LookupRadiusProfile(ctx *pulumi.Context, args *LookupRadiusProfileArgs, opts ...pulumi.InvokeOption) (*LookupRadiusProfileResult, error)

`RadiusProfile` data source can be used to retrieve the ID for a RADIUS profile by name.

type LookupRadiusProfileResultOutput 

type LookupRadiusProfileResultOutput struct{ *pulumi.OutputState }

A collection of values returned by getRadiusProfile.

func LookupRadiusProfileOutput 

func LookupRadiusProfileOutput(ctx *pulumi.Context, args LookupRadiusProfileOutputArgs, opts ...pulumi.InvokeOption) LookupRadiusProfileResultOutput

func (LookupRadiusProfileResultOutput) ElementType 

func (LookupRadiusProfileResultOutput) ElementType() reflect.Type

func (LookupRadiusProfileResultOutput) Id 

func (o LookupRadiusProfileResultOutput) Id() pulumi.StringOutput

The ID of this AP group.

func (LookupRadiusProfileResultOutput) Name 

func (o LookupRadiusProfileResultOutput) Name() pulumi.StringPtrOutput

The name of the RADIUS profile to look up. Defaults to `Default`.

func (LookupRadiusProfileResultOutput) Site 

func (o LookupRadiusProfileResultOutput) Site() pulumi.StringOutput

The name of the site the RADIUS profile is associated with.

func (LookupRadiusProfileResultOutput) ToLookupRadiusProfileResultOutput 

func (o LookupRadiusProfileResultOutput) ToLookupRadiusProfileResultOutput() LookupRadiusProfileResultOutput

func (LookupRadiusProfileResultOutput) ToLookupRadiusProfileResultOutputWithContext 

func (o LookupRadiusProfileResultOutput) ToLookupRadiusProfileResultOutputWithContext(ctx context.Context) LookupRadiusProfileResultOutput

type Network 

type Network struct {
	pulumi.CustomResourceState

	// Specifies the IPv4 addresses for the DNS server to be returned from the DHCP server. Leave blank to disable this feature.
	DhcpDns pulumi.StringArrayOutput `pulumi:"dhcpDns"`
	// Specifies whether DHCP is enabled or not on this network.
	DhcpEnabled pulumi.BoolPtrOutput `pulumi:"dhcpEnabled"`
	// Specifies the lease time for DHCP addresses in seconds. Defaults to `86400`.
	DhcpLease pulumi.IntPtrOutput `pulumi:"dhcpLease"`
	// Specifies whether DHCP relay is enabled or not on this network.
	DhcpRelayEnabled pulumi.BoolPtrOutput `pulumi:"dhcpRelayEnabled"`
	// The IPv4 address where the DHCP range of addresses starts.
	DhcpStart pulumi.StringPtrOutput `pulumi:"dhcpStart"`
	// The IPv4 address where the DHCP range of addresses stops.
	DhcpStop pulumi.StringPtrOutput `pulumi:"dhcpStop"`
	// Specifies the IPv6 addresses for the DNS server to be returned from the DHCP server. Used if `dhcpV6DnsAuto` is set to `false`.
	DhcpV6Dns pulumi.StringArrayOutput `pulumi:"dhcpV6Dns"`
	// Specifies DNS source to propagate. If set `false` the entries in `dhcpV6Dns` are used, the upstream entries otherwise Defaults to `true`.
	DhcpV6DnsAuto pulumi.BoolPtrOutput `pulumi:"dhcpV6DnsAuto"`
	// Enable stateful DHCPv6 for static configuration.
	DhcpV6Enabled pulumi.BoolPtrOutput `pulumi:"dhcpV6Enabled"`
	// Specifies the lease time for DHCPv6 addresses in seconds. Defaults to `86400`.
	DhcpV6Lease pulumi.IntPtrOutput `pulumi:"dhcpV6Lease"`
	// Start address of the DHCPv6 range. Used in static DHCPv6 configuration.
	DhcpV6Start pulumi.StringPtrOutput `pulumi:"dhcpV6Start"`
	// End address of the DHCPv6 range. Used in static DHCPv6 configuration.
	DhcpV6Stop pulumi.StringPtrOutput `pulumi:"dhcpV6Stop"`
	// Toggles on the DHCP boot options. Should be set to true when you want to have dhcpd*boot*filename, and dhcpd*boot*server to take effect.
	DhcpdBootEnabled pulumi.BoolPtrOutput `pulumi:"dhcpdBootEnabled"`
	// Specifies the file to PXE boot from on the dhcpd*boot*server.
	DhcpdBootFilename pulumi.StringPtrOutput `pulumi:"dhcpdBootFilename"`
	// Specifies the IPv4 address of a TFTP server to network boot from.
	DhcpdBootServer pulumi.StringPtrOutput `pulumi:"dhcpdBootServer"`
	// The domain name of this network.
	DomainName pulumi.StringPtrOutput `pulumi:"domainName"`
	// Specifies whether IGMP snooping is enabled or not.
	IgmpSnooping pulumi.BoolPtrOutput `pulumi:"igmpSnooping"`
	// Specifies whether this network should be allowed to access the internet or not. Defaults to `true`.
	InternetAccessEnabled pulumi.BoolPtrOutput `pulumi:"internetAccessEnabled"`
	// Specifies whether this network should be allowed to access other local networks or not. Defaults to `true`.
	IntraNetworkAccessEnabled pulumi.BoolPtrOutput `pulumi:"intraNetworkAccessEnabled"`
	// Specifies which type of IPv6 connection to use. Must be one of either `static`, `pd`, or `none`. Defaults to `none`.
	Ipv6InterfaceType pulumi.StringPtrOutput `pulumi:"ipv6InterfaceType"`
	// Specifies which WAN interface to use for IPv6 PD. Must be one of either `wan` or `wan2`.
	Ipv6PdInterface pulumi.StringPtrOutput `pulumi:"ipv6PdInterface"`
	// Specifies the IPv6 Prefix ID.
	Ipv6PdPrefixid pulumi.StringPtrOutput `pulumi:"ipv6PdPrefixid"`
	// Start address of the DHCPv6 range. Used if `ipv6InterfaceType` is set to `pd`.
	Ipv6PdStart pulumi.StringPtrOutput `pulumi:"ipv6PdStart"`
	// End address of the DHCPv6 range. Used if `ipv6InterfaceType` is set to `pd`.
	Ipv6PdStop pulumi.StringPtrOutput `pulumi:"ipv6PdStop"`
	// Specifies whether to enable router advertisements or not.
	Ipv6RaEnable pulumi.BoolPtrOutput `pulumi:"ipv6RaEnable"`
	// Lifetime in which the address can be used. Address becomes deprecated afterwards. Must be lower than or equal to `ipv6RaValidLifetime` Defaults to `14400`.
	Ipv6RaPreferredLifetime pulumi.IntPtrOutput `pulumi:"ipv6RaPreferredLifetime"`
	// IPv6 router advertisement priority. Must be one of either `high`, `medium`, or `low`
	Ipv6RaPriority pulumi.StringPtrOutput `pulumi:"ipv6RaPriority"`
	// Total lifetime in which the address can be used. Must be equal to or greater than `ipv6RaPreferredLifetime`. Defaults to `86400`.
	Ipv6RaValidLifetime pulumi.IntPtrOutput `pulumi:"ipv6RaValidLifetime"`
	// Specifies the static IPv6 subnet when `ipv6InterfaceType` is 'static'.
	Ipv6StaticSubnet pulumi.StringPtrOutput `pulumi:"ipv6StaticSubnet"`
	// Specifies whether Multicast DNS (mDNS) is enabled or not on the network (Controller >=v7).
	MulticastDns pulumi.BoolPtrOutput `pulumi:"multicastDns"`
	// The name of the network.
	Name pulumi.StringOutput `pulumi:"name"`
	// The group of the network. Defaults to `LAN`.
	NetworkGroup pulumi.StringPtrOutput `pulumi:"networkGroup"`
	// The purpose of the network. Must be one of `corporate`, `guest`, `wan`, or `vlan-only`.
	Purpose pulumi.StringOutput `pulumi:"purpose"`
	// The name of the site to associate the network with.
	Site pulumi.StringOutput `pulumi:"site"`
	// The subnet of the network. Must be a valid CIDR address.
	Subnet pulumi.StringPtrOutput `pulumi:"subnet"`
	// The VLAN ID of the network.
	VlanId pulumi.IntPtrOutput `pulumi:"vlanId"`
	// Specifies the IPv6 prefix size to request from ISP. Must be between 48 and 64.
	WanDhcpV6PdSize pulumi.IntPtrOutput `pulumi:"wanDhcpV6PdSize"`
	// DNS servers IPs of the WAN.
	WanDns pulumi.StringArrayOutput `pulumi:"wanDns"`
	// Specifies the WAN egress quality of service. Defaults to `0`.
	WanEgressQos pulumi.IntPtrOutput `pulumi:"wanEgressQos"`
	// The IPv4 gateway of the WAN.
	WanGateway pulumi.StringPtrOutput `pulumi:"wanGateway"`
	// The IPv6 gateway of the WAN.
	WanGatewayV6 pulumi.StringPtrOutput `pulumi:"wanGatewayV6"`
	// The IPv4 address of the WAN.
	WanIp pulumi.StringPtrOutput `pulumi:"wanIp"`
	// The IPv6 address of the WAN.
	WanIpv6 pulumi.StringPtrOutput `pulumi:"wanIpv6"`
	// The IPv4 netmask of the WAN.
	WanNetmask pulumi.StringPtrOutput `pulumi:"wanNetmask"`
	// Specifies the WAN network group. Must be one of either `WAN`, `WAN2` or `WAN_LTE_FAILOVER`.
	WanNetworkgroup pulumi.StringPtrOutput `pulumi:"wanNetworkgroup"`
	// The IPv6 prefix length of the WAN. Must be between 1 and 128.
	WanPrefixlen pulumi.IntPtrOutput `pulumi:"wanPrefixlen"`
	// Specifies the IPV4 WAN connection type. Must be one of either `disabled`, `static`, `dhcp`, or `pppoe`.
	WanType pulumi.StringPtrOutput `pulumi:"wanType"`
	// Specifies the IPV6 WAN connection type. Must be one of either `disabled`, `static`, or `dhcpv6`.
	WanTypeV6 pulumi.StringPtrOutput `pulumi:"wanTypeV6"`
	// Specifies the IPV4 WAN username.
	WanUsername pulumi.StringPtrOutput `pulumi:"wanUsername"`
	// Specifies the IPV4 WAN password.
	XWanPassword pulumi.StringPtrOutput `pulumi:"xWanPassword"`
}

`Network` manages WAN/LAN/VLAN networks.

## Example Usage

```go package main

import ( 

"github.com/pulumi/pulumi/sdk/v3/go/pulumi"
"github.com/pulumi/pulumi/sdk/v3/go/pulumi/config"
"github.com/pulumiverse/pulumi-unifi/sdk/go/unifi"

) 

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		cfg := config.New(ctx, "")
		vlanId := float64(10)
		if param := cfg.GetFloat64("vlanId"); param != 0 {
			vlanId = param
		}
		_, err := unifi.NewNetwork(ctx, "vlan", &unifi.NetworkArgs{
			Name:        pulumi.String("wifi-vlan"),
			Purpose:     pulumi.String("corporate"),
			Subnet:      pulumi.String("10.0.0.1/24"),
			VlanId:      pulumi.Float64(vlanId),
			DhcpStart:   pulumi.String("10.0.0.6"),
			DhcpStop:    pulumi.String("10.0.0.254"),
			DhcpEnabled: pulumi.Bool(true),
		})
		if err != nil {
			return err
		}
		_, err = unifi.NewNetwork(ctx, "wan", &unifi.NetworkArgs{
			Name:            pulumi.String("wan"),
			Purpose:         pulumi.String("wan"),
			WanNetworkgroup: pulumi.String("WAN"),
			WanType:         pulumi.String("pppoe"),
			WanIp:           pulumi.String("192.168.1.1"),
			WanEgressQos:    pulumi.Int(1),
			WanUsername:     pulumi.String("username"),
			XWanPassword:    pulumi.String("password"),
		})
		if err != nil {
			return err
		}
		return nil
	})
}

```

## Import

import from provider configured site

```sh $ pulumi import unifi:index/network:Network mynetwork 5dc28e5e9106d105bdc87217 ```

import from another site

```sh $ pulumi import unifi:index/network:Network mynetwork bfa2l6i7:5dc28e5e9106d105bdc87217 ```

import network by name

```sh $ pulumi import unifi:index/network:Network mynetwork name=LAN ```

func GetNetwork 

func GetNetwork(ctx *pulumi.Context,
	name string, id pulumi.IDInput, state *NetworkState, opts ...pulumi.ResourceOption) (*Network, error)

GetNetwork gets an existing Network resource's state with the given name, ID, and optional state properties that are used to uniquely qualify the lookup (nil if not required).

func NewNetwork 

func NewNetwork(ctx *pulumi.Context,
	name string, args *NetworkArgs, opts ...pulumi.ResourceOption) (*Network, error)

NewNetwork registers a new resource with the given unique name, arguments, and options.

func (*Network) ElementType 

func (*Network) ElementType() reflect.Type

func (*Network) ToNetworkOutput 

func (i *Network) ToNetworkOutput() NetworkOutput

func (*Network) ToNetworkOutputWithContext 

func (i *Network) ToNetworkOutputWithContext(ctx context.Context) NetworkOutput

type NetworkArgs 

type NetworkArgs struct {
	// Specifies the IPv4 addresses for the DNS server to be returned from the DHCP server. Leave blank to disable this feature.
	DhcpDns pulumi.StringArrayInput
	// Specifies whether DHCP is enabled or not on this network.
	DhcpEnabled pulumi.BoolPtrInput
	// Specifies the lease time for DHCP addresses in seconds. Defaults to `86400`.
	DhcpLease pulumi.IntPtrInput
	// Specifies whether DHCP relay is enabled or not on this network.
	DhcpRelayEnabled pulumi.BoolPtrInput
	// The IPv4 address where the DHCP range of addresses starts.
	DhcpStart pulumi.StringPtrInput
	// The IPv4 address where the DHCP range of addresses stops.
	DhcpStop pulumi.StringPtrInput
	// Specifies the IPv6 addresses for the DNS server to be returned from the DHCP server. Used if `dhcpV6DnsAuto` is set to `false`.
	DhcpV6Dns pulumi.StringArrayInput
	// Specifies DNS source to propagate. If set `false` the entries in `dhcpV6Dns` are used, the upstream entries otherwise Defaults to `true`.
	DhcpV6DnsAuto pulumi.BoolPtrInput
	// Enable stateful DHCPv6 for static configuration.
	DhcpV6Enabled pulumi.BoolPtrInput
	// Specifies the lease time for DHCPv6 addresses in seconds. Defaults to `86400`.
	DhcpV6Lease pulumi.IntPtrInput
	// Start address of the DHCPv6 range. Used in static DHCPv6 configuration.
	DhcpV6Start pulumi.StringPtrInput
	// End address of the DHCPv6 range. Used in static DHCPv6 configuration.
	DhcpV6Stop pulumi.StringPtrInput
	// Toggles on the DHCP boot options. Should be set to true when you want to have dhcpd*boot*filename, and dhcpd*boot*server to take effect.
	DhcpdBootEnabled pulumi.BoolPtrInput
	// Specifies the file to PXE boot from on the dhcpd*boot*server.
	DhcpdBootFilename pulumi.StringPtrInput
	// Specifies the IPv4 address of a TFTP server to network boot from.
	DhcpdBootServer pulumi.StringPtrInput
	// The domain name of this network.
	DomainName pulumi.StringPtrInput
	// Specifies whether IGMP snooping is enabled or not.
	IgmpSnooping pulumi.BoolPtrInput
	// Specifies whether this network should be allowed to access the internet or not. Defaults to `true`.
	InternetAccessEnabled pulumi.BoolPtrInput
	// Specifies whether this network should be allowed to access other local networks or not. Defaults to `true`.
	IntraNetworkAccessEnabled pulumi.BoolPtrInput
	// Specifies which type of IPv6 connection to use. Must be one of either `static`, `pd`, or `none`. Defaults to `none`.
	Ipv6InterfaceType pulumi.StringPtrInput
	// Specifies which WAN interface to use for IPv6 PD. Must be one of either `wan` or `wan2`.
	Ipv6PdInterface pulumi.StringPtrInput
	// Specifies the IPv6 Prefix ID.
	Ipv6PdPrefixid pulumi.StringPtrInput
	// Start address of the DHCPv6 range. Used if `ipv6InterfaceType` is set to `pd`.
	Ipv6PdStart pulumi.StringPtrInput
	// End address of the DHCPv6 range. Used if `ipv6InterfaceType` is set to `pd`.
	Ipv6PdStop pulumi.StringPtrInput
	// Specifies whether to enable router advertisements or not.
	Ipv6RaEnable pulumi.BoolPtrInput
	// Lifetime in which the address can be used. Address becomes deprecated afterwards. Must be lower than or equal to `ipv6RaValidLifetime` Defaults to `14400`.
	Ipv6RaPreferredLifetime pulumi.IntPtrInput
	// IPv6 router advertisement priority. Must be one of either `high`, `medium`, or `low`
	Ipv6RaPriority pulumi.StringPtrInput
	// Total lifetime in which the address can be used. Must be equal to or greater than `ipv6RaPreferredLifetime`. Defaults to `86400`.
	Ipv6RaValidLifetime pulumi.IntPtrInput
	// Specifies the static IPv6 subnet when `ipv6InterfaceType` is 'static'.
	Ipv6StaticSubnet pulumi.StringPtrInput
	// Specifies whether Multicast DNS (mDNS) is enabled or not on the network (Controller >=v7).
	MulticastDns pulumi.BoolPtrInput
	// The name of the network.
	Name pulumi.StringPtrInput
	// The group of the network. Defaults to `LAN`.
	NetworkGroup pulumi.StringPtrInput
	// The purpose of the network. Must be one of `corporate`, `guest`, `wan`, or `vlan-only`.
	Purpose pulumi.StringInput
	// The name of the site to associate the network with.
	Site pulumi.StringPtrInput
	// The subnet of the network. Must be a valid CIDR address.
	Subnet pulumi.StringPtrInput
	// The VLAN ID of the network.
	VlanId pulumi.IntPtrInput
	// Specifies the IPv6 prefix size to request from ISP. Must be between 48 and 64.
	WanDhcpV6PdSize pulumi.IntPtrInput
	// DNS servers IPs of the WAN.
	WanDns pulumi.StringArrayInput
	// Specifies the WAN egress quality of service. Defaults to `0`.
	WanEgressQos pulumi.IntPtrInput
	// The IPv4 gateway of the WAN.
	WanGateway pulumi.StringPtrInput
	// The IPv6 gateway of the WAN.
	WanGatewayV6 pulumi.StringPtrInput
	// The IPv4 address of the WAN.
	WanIp pulumi.StringPtrInput
	// The IPv6 address of the WAN.
	WanIpv6 pulumi.StringPtrInput
	// The IPv4 netmask of the WAN.
	WanNetmask pulumi.StringPtrInput
	// Specifies the WAN network group. Must be one of either `WAN`, `WAN2` or `WAN_LTE_FAILOVER`.
	WanNetworkgroup pulumi.StringPtrInput
	// The IPv6 prefix length of the WAN. Must be between 1 and 128.
	WanPrefixlen pulumi.IntPtrInput
	// Specifies the IPV4 WAN connection type. Must be one of either `disabled`, `static`, `dhcp`, or `pppoe`.
	WanType pulumi.StringPtrInput
	// Specifies the IPV6 WAN connection type. Must be one of either `disabled`, `static`, or `dhcpv6`.
	WanTypeV6 pulumi.StringPtrInput
	// Specifies the IPV4 WAN username.
	WanUsername pulumi.StringPtrInput
	// Specifies the IPV4 WAN password.
	XWanPassword pulumi.StringPtrInput
}

The set of arguments for constructing a Network resource.

func (NetworkArgs) ElementType 

func (NetworkArgs) ElementType() reflect.Type

type NetworkArray 

type NetworkArray []NetworkInput

func (NetworkArray) ElementType 

func (NetworkArray) ElementType() reflect.Type

func (NetworkArray) ToNetworkArrayOutput 

func (i NetworkArray) ToNetworkArrayOutput() NetworkArrayOutput

func (NetworkArray) ToNetworkArrayOutputWithContext 

func (i NetworkArray) ToNetworkArrayOutputWithContext(ctx context.Context) NetworkArrayOutput

type NetworkArrayInput 

type NetworkArrayInput interface {
	pulumi.Input

	ToNetworkArrayOutput() NetworkArrayOutput
	ToNetworkArrayOutputWithContext(context.Context) NetworkArrayOutput
}

NetworkArrayInput is an input type that accepts NetworkArray and NetworkArrayOutput values. You can construct a concrete instance of `NetworkArrayInput` via: 

NetworkArray{ NetworkArgs{...} }

type NetworkArrayOutput 

type NetworkArrayOutput struct{ *pulumi.OutputState }

func (NetworkArrayOutput) ElementType 

func (NetworkArrayOutput) ElementType() reflect.Type

func (NetworkArrayOutput) Index 

func (o NetworkArrayOutput) Index(i pulumi.IntInput) NetworkOutput

func (NetworkArrayOutput) ToNetworkArrayOutput 

func (o NetworkArrayOutput) ToNetworkArrayOutput() NetworkArrayOutput

func (NetworkArrayOutput) ToNetworkArrayOutputWithContext 

func (o NetworkArrayOutput) ToNetworkArrayOutputWithContext(ctx context.Context) NetworkArrayOutput

type NetworkInput 

type NetworkInput interface {
	pulumi.Input

	ToNetworkOutput() NetworkOutput
	ToNetworkOutputWithContext(ctx context.Context) NetworkOutput
}

type NetworkMap 

type NetworkMap map[string]NetworkInput

func (NetworkMap) ElementType 

func (NetworkMap) ElementType() reflect.Type

func (NetworkMap) ToNetworkMapOutput 

func (i NetworkMap) ToNetworkMapOutput() NetworkMapOutput

func (NetworkMap) ToNetworkMapOutputWithContext 

func (i NetworkMap) ToNetworkMapOutputWithContext(ctx context.Context) NetworkMapOutput

type NetworkMapInput 

type NetworkMapInput interface {
	pulumi.Input

	ToNetworkMapOutput() NetworkMapOutput
	ToNetworkMapOutputWithContext(context.Context) NetworkMapOutput
}

NetworkMapInput is an input type that accepts NetworkMap and NetworkMapOutput values. You can construct a concrete instance of `NetworkMapInput` via: 

NetworkMap{ "key": NetworkArgs{...} }

type NetworkMapOutput 

type NetworkMapOutput struct{ *pulumi.OutputState }

func (NetworkMapOutput) ElementType 

func (NetworkMapOutput) ElementType() reflect.Type

func (NetworkMapOutput) MapIndex 

func (o NetworkMapOutput) MapIndex(k pulumi.StringInput) NetworkOutput

func (NetworkMapOutput) ToNetworkMapOutput 

func (o NetworkMapOutput) ToNetworkMapOutput() NetworkMapOutput

func (NetworkMapOutput) ToNetworkMapOutputWithContext 

func (o NetworkMapOutput) ToNetworkMapOutputWithContext(ctx context.Context) NetworkMapOutput

type NetworkOutput 

type NetworkOutput struct{ *pulumi.OutputState }

func (NetworkOutput) DhcpDns 

func (o NetworkOutput) DhcpDns() pulumi.StringArrayOutput

Specifies the IPv4 addresses for the DNS server to be returned from the DHCP server. Leave blank to disable this feature.

func (NetworkOutput) DhcpEnabled 

func (o NetworkOutput) DhcpEnabled() pulumi.BoolPtrOutput

Specifies whether DHCP is enabled or not on this network.

func (NetworkOutput) DhcpLease 

func (o NetworkOutput) DhcpLease() pulumi.IntPtrOutput

Specifies the lease time for DHCP addresses in seconds. Defaults to `86400`.

func (NetworkOutput) DhcpRelayEnabled 

func (o NetworkOutput) DhcpRelayEnabled() pulumi.BoolPtrOutput

Specifies whether DHCP relay is enabled or not on this network.

func (NetworkOutput) DhcpStart 

func (o NetworkOutput) DhcpStart() pulumi.StringPtrOutput

The IPv4 address where the DHCP range of addresses starts.

func (NetworkOutput) DhcpStop 

func (o NetworkOutput) DhcpStop() pulumi.StringPtrOutput

The IPv4 address where the DHCP range of addresses stops.

func (NetworkOutput) DhcpV6Dns 

func (o NetworkOutput) DhcpV6Dns() pulumi.StringArrayOutput

Specifies the IPv6 addresses for the DNS server to be returned from the DHCP server. Used if `dhcpV6DnsAuto` is set to `false`.

func (NetworkOutput) DhcpV6DnsAuto 

func (o NetworkOutput) DhcpV6DnsAuto() pulumi.BoolPtrOutput

Specifies DNS source to propagate. If set `false` the entries in `dhcpV6Dns` are used, the upstream entries otherwise Defaults to `true`.

func (NetworkOutput) DhcpV6Enabled 

func (o NetworkOutput) DhcpV6Enabled() pulumi.BoolPtrOutput

Enable stateful DHCPv6 for static configuration.

func (NetworkOutput) DhcpV6Lease 

func (o NetworkOutput) DhcpV6Lease() pulumi.IntPtrOutput

Specifies the lease time for DHCPv6 addresses in seconds. Defaults to `86400`.

func (NetworkOutput) DhcpV6Start 

func (o NetworkOutput) DhcpV6Start() pulumi.StringPtrOutput

Start address of the DHCPv6 range. Used in static DHCPv6 configuration.

func (NetworkOutput) DhcpV6Stop 

func (o NetworkOutput) DhcpV6Stop() pulumi.StringPtrOutput

End address of the DHCPv6 range. Used in static DHCPv6 configuration.

func (NetworkOutput) DhcpdBootEnabled 

func (o NetworkOutput) DhcpdBootEnabled() pulumi.BoolPtrOutput

Toggles on the DHCP boot options. Should be set to true when you want to have dhcpd*boot*filename, and dhcpd*boot*server to take effect.

func (NetworkOutput) DhcpdBootFilename 

func (o NetworkOutput) DhcpdBootFilename() pulumi.StringPtrOutput

Specifies the file to PXE boot from on the dhcpd*boot*server.

func (NetworkOutput) DhcpdBootServer 

func (o NetworkOutput) DhcpdBootServer() pulumi.StringPtrOutput

Specifies the IPv4 address of a TFTP server to network boot from.

func (NetworkOutput) DomainName 

func (o NetworkOutput) DomainName() pulumi.StringPtrOutput

The domain name of this network.

func (NetworkOutput) ElementType 

func (NetworkOutput) ElementType() reflect.Type

func (NetworkOutput) IgmpSnooping 

func (o NetworkOutput) IgmpSnooping() pulumi.BoolPtrOutput

Specifies whether IGMP snooping is enabled or not.

func (NetworkOutput) InternetAccessEnabled 

func (o NetworkOutput) InternetAccessEnabled() pulumi.BoolPtrOutput

Specifies whether this network should be allowed to access the internet or not. Defaults to `true`.

func (NetworkOutput) IntraNetworkAccessEnabled 

func (o NetworkOutput) IntraNetworkAccessEnabled() pulumi.BoolPtrOutput

Specifies whether this network should be allowed to access other local networks or not. Defaults to `true`.

func (NetworkOutput) Ipv6InterfaceType 

func (o NetworkOutput) Ipv6InterfaceType() pulumi.StringPtrOutput

Specifies which type of IPv6 connection to use. Must be one of either `static`, `pd`, or `none`. Defaults to `none`.

func (NetworkOutput) Ipv6PdInterface 

func (o NetworkOutput) Ipv6PdInterface() pulumi.StringPtrOutput

Specifies which WAN interface to use for IPv6 PD. Must be one of either `wan` or `wan2`.

func (NetworkOutput) Ipv6PdPrefixid 

func (o NetworkOutput) Ipv6PdPrefixid() pulumi.StringPtrOutput

Specifies the IPv6 Prefix ID.

func (NetworkOutput) Ipv6PdStart 

func (o NetworkOutput) Ipv6PdStart() pulumi.StringPtrOutput

Start address of the DHCPv6 range. Used if `ipv6InterfaceType` is set to `pd`.

func (NetworkOutput) Ipv6PdStop 

func (o NetworkOutput) Ipv6PdStop() pulumi.StringPtrOutput

End address of the DHCPv6 range. Used if `ipv6InterfaceType` is set to `pd`.

func (NetworkOutput) Ipv6RaEnable 

func (o NetworkOutput) Ipv6RaEnable() pulumi.BoolPtrOutput

Specifies whether to enable router advertisements or not.

func (NetworkOutput) Ipv6RaPreferredLifetime 

func (o NetworkOutput) Ipv6RaPreferredLifetime() pulumi.IntPtrOutput

Lifetime in which the address can be used. Address becomes deprecated afterwards. Must be lower than or equal to `ipv6RaValidLifetime` Defaults to `14400`.

func (NetworkOutput) Ipv6RaPriority 

func (o NetworkOutput) Ipv6RaPriority() pulumi.StringPtrOutput

IPv6 router advertisement priority. Must be one of either `high`, `medium`, or `low`

func (NetworkOutput) Ipv6RaValidLifetime 

func (o NetworkOutput) Ipv6RaValidLifetime() pulumi.IntPtrOutput

Total lifetime in which the address can be used. Must be equal to or greater than `ipv6RaPreferredLifetime`. Defaults to `86400`.

func (NetworkOutput) Ipv6StaticSubnet 

func (o NetworkOutput) Ipv6StaticSubnet() pulumi.StringPtrOutput

Specifies the static IPv6 subnet when `ipv6InterfaceType` is 'static'.

func (NetworkOutput) MulticastDns 

func (o NetworkOutput) MulticastDns() pulumi.BoolPtrOutput

Specifies whether Multicast DNS (mDNS) is enabled or not on the network (Controller >=v7).

func (NetworkOutput) Name 

func (o NetworkOutput) Name() pulumi.StringOutput

The name of the network.

func (NetworkOutput) NetworkGroup 

func (o NetworkOutput) NetworkGroup() pulumi.StringPtrOutput

The group of the network. Defaults to `LAN`.

func (NetworkOutput) Purpose 

func (o NetworkOutput) Purpose() pulumi.StringOutput

The purpose of the network. Must be one of `corporate`, `guest`, `wan`, or `vlan-only`.

func (NetworkOutput) Site 

func (o NetworkOutput) Site() pulumi.StringOutput

The name of the site to associate the network with.

func (NetworkOutput) Subnet 

func (o NetworkOutput) Subnet() pulumi.StringPtrOutput

The subnet of the network. Must be a valid CIDR address.

func (NetworkOutput) ToNetworkOutput 

func (o NetworkOutput) ToNetworkOutput() NetworkOutput

func (NetworkOutput) ToNetworkOutputWithContext 

func (o NetworkOutput) ToNetworkOutputWithContext(ctx context.Context) NetworkOutput

func (NetworkOutput) VlanId 

func (o NetworkOutput) VlanId() pulumi.IntPtrOutput

The VLAN ID of the network.

func (NetworkOutput) WanDhcpV6PdSize 

func (o NetworkOutput) WanDhcpV6PdSize() pulumi.IntPtrOutput

Specifies the IPv6 prefix size to request from ISP. Must be between 48 and 64.

func (NetworkOutput) WanDns 

func (o NetworkOutput) WanDns() pulumi.StringArrayOutput

DNS servers IPs of the WAN.

func (NetworkOutput) WanEgressQos 

func (o NetworkOutput) WanEgressQos() pulumi.IntPtrOutput

Specifies the WAN egress quality of service. Defaults to `0`.

func (NetworkOutput) WanGateway 

func (o NetworkOutput) WanGateway() pulumi.StringPtrOutput

The IPv4 gateway of the WAN.

func (NetworkOutput) WanGatewayV6 

func (o NetworkOutput) WanGatewayV6() pulumi.StringPtrOutput

The IPv6 gateway of the WAN.

func (NetworkOutput) WanIp 

func (o NetworkOutput) WanIp() pulumi.StringPtrOutput

The IPv4 address of the WAN.

func (NetworkOutput) WanIpv6 

func (o NetworkOutput) WanIpv6() pulumi.StringPtrOutput

The IPv6 address of the WAN.

func (NetworkOutput) WanNetmask 

func (o NetworkOutput) WanNetmask() pulumi.StringPtrOutput

The IPv4 netmask of the WAN.

func (NetworkOutput) WanNetworkgroup 

func (o NetworkOutput) WanNetworkgroup() pulumi.StringPtrOutput

Specifies the WAN network group. Must be one of either `WAN`, `WAN2` or `WAN_LTE_FAILOVER`.

func (NetworkOutput) WanPrefixlen 

func (o NetworkOutput) WanPrefixlen() pulumi.IntPtrOutput

The IPv6 prefix length of the WAN. Must be between 1 and 128.

func (NetworkOutput) WanType 

func (o NetworkOutput) WanType() pulumi.StringPtrOutput

Specifies the IPV4 WAN connection type. Must be one of either `disabled`, `static`, `dhcp`, or `pppoe`.

func (NetworkOutput) WanTypeV6 

func (o NetworkOutput) WanTypeV6() pulumi.StringPtrOutput

Specifies the IPV6 WAN connection type. Must be one of either `disabled`, `static`, or `dhcpv6`.

func (NetworkOutput) WanUsername 

func (o NetworkOutput) WanUsername() pulumi.StringPtrOutput

Specifies the IPV4 WAN username.

func (NetworkOutput) XWanPassword 

func (o NetworkOutput) XWanPassword() pulumi.StringPtrOutput

Specifies the IPV4 WAN password.

type NetworkState 

type NetworkState struct {
	// Specifies the IPv4 addresses for the DNS server to be returned from the DHCP server. Leave blank to disable this feature.
	DhcpDns pulumi.StringArrayInput
	// Specifies whether DHCP is enabled or not on this network.
	DhcpEnabled pulumi.BoolPtrInput
	// Specifies the lease time for DHCP addresses in seconds. Defaults to `86400`.
	DhcpLease pulumi.IntPtrInput
	// Specifies whether DHCP relay is enabled or not on this network.
	DhcpRelayEnabled pulumi.BoolPtrInput
	// The IPv4 address where the DHCP range of addresses starts.
	DhcpStart pulumi.StringPtrInput
	// The IPv4 address where the DHCP range of addresses stops.
	DhcpStop pulumi.StringPtrInput
	// Specifies the IPv6 addresses for the DNS server to be returned from the DHCP server. Used if `dhcpV6DnsAuto` is set to `false`.
	DhcpV6Dns pulumi.StringArrayInput
	// Specifies DNS source to propagate. If set `false` the entries in `dhcpV6Dns` are used, the upstream entries otherwise Defaults to `true`.
	DhcpV6DnsAuto pulumi.BoolPtrInput
	// Enable stateful DHCPv6 for static configuration.
	DhcpV6Enabled pulumi.BoolPtrInput
	// Specifies the lease time for DHCPv6 addresses in seconds. Defaults to `86400`.
	DhcpV6Lease pulumi.IntPtrInput
	// Start address of the DHCPv6 range. Used in static DHCPv6 configuration.
	DhcpV6Start pulumi.StringPtrInput
	// End address of the DHCPv6 range. Used in static DHCPv6 configuration.
	DhcpV6Stop pulumi.StringPtrInput
	// Toggles on the DHCP boot options. Should be set to true when you want to have dhcpd*boot*filename, and dhcpd*boot*server to take effect.
	DhcpdBootEnabled pulumi.BoolPtrInput
	// Specifies the file to PXE boot from on the dhcpd*boot*server.
	DhcpdBootFilename pulumi.StringPtrInput
	// Specifies the IPv4 address of a TFTP server to network boot from.
	DhcpdBootServer pulumi.StringPtrInput
	// The domain name of this network.
	DomainName pulumi.StringPtrInput
	// Specifies whether IGMP snooping is enabled or not.
	IgmpSnooping pulumi.BoolPtrInput
	// Specifies whether this network should be allowed to access the internet or not. Defaults to `true`.
	InternetAccessEnabled pulumi.BoolPtrInput
	// Specifies whether this network should be allowed to access other local networks or not. Defaults to `true`.
	IntraNetworkAccessEnabled pulumi.BoolPtrInput
	// Specifies which type of IPv6 connection to use. Must be one of either `static`, `pd`, or `none`. Defaults to `none`.
	Ipv6InterfaceType pulumi.StringPtrInput
	// Specifies which WAN interface to use for IPv6 PD. Must be one of either `wan` or `wan2`.
	Ipv6PdInterface pulumi.StringPtrInput
	// Specifies the IPv6 Prefix ID.
	Ipv6PdPrefixid pulumi.StringPtrInput
	// Start address of the DHCPv6 range. Used if `ipv6InterfaceType` is set to `pd`.
	Ipv6PdStart pulumi.StringPtrInput
	// End address of the DHCPv6 range. Used if `ipv6InterfaceType` is set to `pd`.
	Ipv6PdStop pulumi.StringPtrInput
	// Specifies whether to enable router advertisements or not.
	Ipv6RaEnable pulumi.BoolPtrInput
	// Lifetime in which the address can be used. Address becomes deprecated afterwards. Must be lower than or equal to `ipv6RaValidLifetime` Defaults to `14400`.
	Ipv6RaPreferredLifetime pulumi.IntPtrInput
	// IPv6 router advertisement priority. Must be one of either `high`, `medium`, or `low`
	Ipv6RaPriority pulumi.StringPtrInput
	// Total lifetime in which the address can be used. Must be equal to or greater than `ipv6RaPreferredLifetime`. Defaults to `86400`.
	Ipv6RaValidLifetime pulumi.IntPtrInput
	// Specifies the static IPv6 subnet when `ipv6InterfaceType` is 'static'.
	Ipv6StaticSubnet pulumi.StringPtrInput
	// Specifies whether Multicast DNS (mDNS) is enabled or not on the network (Controller >=v7).
	MulticastDns pulumi.BoolPtrInput
	// The name of the network.
	Name pulumi.StringPtrInput
	// The group of the network. Defaults to `LAN`.
	NetworkGroup pulumi.StringPtrInput
	// The purpose of the network. Must be one of `corporate`, `guest`, `wan`, or `vlan-only`.
	Purpose pulumi.StringPtrInput
	// The name of the site to associate the network with.
	Site pulumi.StringPtrInput
	// The subnet of the network. Must be a valid CIDR address.
	Subnet pulumi.StringPtrInput
	// The VLAN ID of the network.
	VlanId pulumi.IntPtrInput
	// Specifies the IPv6 prefix size to request from ISP. Must be between 48 and 64.
	WanDhcpV6PdSize pulumi.IntPtrInput
	// DNS servers IPs of the WAN.
	WanDns pulumi.StringArrayInput
	// Specifies the WAN egress quality of service. Defaults to `0`.
	WanEgressQos pulumi.IntPtrInput
	// The IPv4 gateway of the WAN.
	WanGateway pulumi.StringPtrInput
	// The IPv6 gateway of the WAN.
	WanGatewayV6 pulumi.StringPtrInput
	// The IPv4 address of the WAN.
	WanIp pulumi.StringPtrInput
	// The IPv6 address of the WAN.
	WanIpv6 pulumi.StringPtrInput
	// The IPv4 netmask of the WAN.
	WanNetmask pulumi.StringPtrInput
	// Specifies the WAN network group. Must be one of either `WAN`, `WAN2` or `WAN_LTE_FAILOVER`.
	WanNetworkgroup pulumi.StringPtrInput
	// The IPv6 prefix length of the WAN. Must be between 1 and 128.
	WanPrefixlen pulumi.IntPtrInput
	// Specifies the IPV4 WAN connection type. Must be one of either `disabled`, `static`, `dhcp`, or `pppoe`.
	WanType pulumi.StringPtrInput
	// Specifies the IPV6 WAN connection type. Must be one of either `disabled`, `static`, or `dhcpv6`.
	WanTypeV6 pulumi.StringPtrInput
	// Specifies the IPV4 WAN username.
	WanUsername pulumi.StringPtrInput
	// Specifies the IPV4 WAN password.
	XWanPassword pulumi.StringPtrInput
}

func (NetworkState) ElementType 

func (NetworkState) ElementType() reflect.Type

type Provider 

type Provider struct {
	pulumi.ProviderResourceState

	// URL of the controller API. Can be specified with the `UNIFI_API` environment variable. You should **NOT** supply the
	// path (`/api`), the SDK will discover the appropriate paths. This is to support UDM Pro style API paths as well as more
	// standard controller paths.
	ApiUrl pulumi.StringPtrOutput `pulumi:"apiUrl"`
	// Password for the user accessing the API. Can be specified with the `UNIFI_PASSWORD` environment variable.
	Password pulumi.StringPtrOutput `pulumi:"password"`
	// The site in the Unifi controller this provider will manage. Can be specified with the `UNIFI_SITE` environment variable.
	// Default: `default`
	Site pulumi.StringPtrOutput `pulumi:"site"`
	// Local user name for the Unifi controller API. Can be specified with the `UNIFI_USERNAME` environment variable.
	Username pulumi.StringPtrOutput `pulumi:"username"`
}

The provider type for the unifi package. By default, resources use package-wide configuration settings, however an explicit `Provider` instance may be created and passed during resource construction to achieve fine-grained programmatic control over provider settings. See the [documentation](https://www.pulumi.com/docs/reference/programming-model/#providers) for more information.

func NewProvider 

func NewProvider(ctx *pulumi.Context,
	name string, args *ProviderArgs, opts ...pulumi.ResourceOption) (*Provider, error)

NewProvider registers a new resource with the given unique name, arguments, and options.

func (*Provider) ElementType 

func (*Provider) ElementType() reflect.Type

func (*Provider) ToProviderOutput 

func (i *Provider) ToProviderOutput() ProviderOutput

func (*Provider) ToProviderOutputWithContext 

func (i *Provider) ToProviderOutputWithContext(ctx context.Context) ProviderOutput

type ProviderArgs 

type ProviderArgs struct {
	// Skip verification of TLS certificates of API requests. You may need to set this to `true` if you are using your local
	// API without setting up a signed certificate. Can be specified with the `UNIFI_INSECURE` environment variable.
	AllowInsecure pulumi.BoolPtrInput
	// URL of the controller API. Can be specified with the `UNIFI_API` environment variable. You should **NOT** supply the
	// path (`/api`), the SDK will discover the appropriate paths. This is to support UDM Pro style API paths as well as more
	// standard controller paths.
	ApiUrl pulumi.StringPtrInput
	// Password for the user accessing the API. Can be specified with the `UNIFI_PASSWORD` environment variable.
	Password pulumi.StringPtrInput
	// The site in the Unifi controller this provider will manage. Can be specified with the `UNIFI_SITE` environment variable.
	// Default: `default`
	Site pulumi.StringPtrInput
	// Local user name for the Unifi controller API. Can be specified with the `UNIFI_USERNAME` environment variable.
	Username pulumi.StringPtrInput
}

The set of arguments for constructing a Provider resource.

func (ProviderArgs) ElementType 

func (ProviderArgs) ElementType() reflect.Type

type ProviderInput 

type ProviderInput interface {
	pulumi.Input

	ToProviderOutput() ProviderOutput
	ToProviderOutputWithContext(ctx context.Context) ProviderOutput
}

type ProviderOutput 

type ProviderOutput struct{ *pulumi.OutputState }

func (ProviderOutput) ApiUrl 

func (o ProviderOutput) ApiUrl() pulumi.StringPtrOutput

URL of the controller API. Can be specified with the `UNIFI_API` environment variable. You should **NOT** supply the path (`/api`), the SDK will discover the appropriate paths. This is to support UDM Pro style API paths as well as more standard controller paths.

func (ProviderOutput) ElementType 

func (ProviderOutput) ElementType() reflect.Type

func (ProviderOutput) Password 

func (o ProviderOutput) Password() pulumi.StringPtrOutput

Password for the user accessing the API. Can be specified with the `UNIFI_PASSWORD` environment variable.

func (ProviderOutput) Site 

func (o ProviderOutput) Site() pulumi.StringPtrOutput

The site in the Unifi controller this provider will manage. Can be specified with the `UNIFI_SITE` environment variable. Default: `default`

func (ProviderOutput) ToProviderOutput 

func (o ProviderOutput) ToProviderOutput() ProviderOutput

func (ProviderOutput) ToProviderOutputWithContext 

func (o ProviderOutput) ToProviderOutputWithContext(ctx context.Context) ProviderOutput

func (ProviderOutput) Username 

func (o ProviderOutput) Username() pulumi.StringPtrOutput

Local user name for the Unifi controller API. Can be specified with the `UNIFI_USERNAME` environment variable.

type RadiusProfile 

type RadiusProfile struct {
	pulumi.CustomResourceState

	// Specifies whether to use RADIUS accounting. Defaults to `false`.
	AccountingEnabled pulumi.BoolPtrOutput `pulumi:"accountingEnabled"`
	// RADIUS accounting servers.
	AcctServers RadiusProfileAcctServerArrayOutput `pulumi:"acctServers"`
	// RADIUS authentication servers.
	AuthServers RadiusProfileAuthServerArrayOutput `pulumi:"authServers"`
	// Specifies whether to use interim_update. Defaults to `false`.
	InterimUpdateEnabled pulumi.BoolPtrOutput `pulumi:"interimUpdateEnabled"`
	// Specifies interimUpdate interval. Defaults to `3600`.
	InterimUpdateInterval pulumi.IntPtrOutput `pulumi:"interimUpdateInterval"`
	// The name of the profile.
	Name pulumi.StringOutput `pulumi:"name"`
	// The name of the site to associate the settings with.
	Site pulumi.StringOutput `pulumi:"site"`
	// Specifies whether to use usg as a RADIUS accounting server. Defaults to `false`.
	UseUsgAcctServer pulumi.BoolPtrOutput `pulumi:"useUsgAcctServer"`
	// Specifies whether to use usg as a RADIUS authentication server. Defaults to `false`.
	UseUsgAuthServer pulumi.BoolPtrOutput `pulumi:"useUsgAuthServer"`
	// Specifies whether to use vlan on wired connections. Defaults to `false`.
	VlanEnabled pulumi.BoolPtrOutput `pulumi:"vlanEnabled"`
	// Specifies whether to use vlan on wireless connections. Must be one of `disabled`, `optional`, or `required`. Defaults to “.
	VlanWlanMode pulumi.StringPtrOutput `pulumi:"vlanWlanMode"`
}

`RadiusProfile` manages RADIUS profiles.

func GetRadiusProfile 

func GetRadiusProfile(ctx *pulumi.Context,
	name string, id pulumi.IDInput, state *RadiusProfileState, opts ...pulumi.ResourceOption) (*RadiusProfile, error)

GetRadiusProfile gets an existing RadiusProfile resource's state with the given name, ID, and optional state properties that are used to uniquely qualify the lookup (nil if not required).

func NewRadiusProfile 

func NewRadiusProfile(ctx *pulumi.Context,
	name string, args *RadiusProfileArgs, opts ...pulumi.ResourceOption) (*RadiusProfile, error)

NewRadiusProfile registers a new resource with the given unique name, arguments, and options.

func (*RadiusProfile) ElementType 

func (*RadiusProfile) ElementType() reflect.Type

func (*RadiusProfile) ToRadiusProfileOutput 

func (i *RadiusProfile) ToRadiusProfileOutput() RadiusProfileOutput

func (*RadiusProfile) ToRadiusProfileOutputWithContext 

func (i *RadiusProfile) ToRadiusProfileOutputWithContext(ctx context.Context) RadiusProfileOutput

type RadiusProfileAcctServer 

type RadiusProfileAcctServer struct {
	// IP address of accounting service server.
	Ip string `pulumi:"ip"`
	// Port of accounting service. Defaults to `1813`.
	Port *int `pulumi:"port"`
	// RADIUS secret.
	Xsecret string `pulumi:"xsecret"`
}

type RadiusProfileAcctServerArgs 

type RadiusProfileAcctServerArgs struct {
	// IP address of accounting service server.
	Ip pulumi.StringInput `pulumi:"ip"`
	// Port of accounting service. Defaults to `1813`.
	Port pulumi.IntPtrInput `pulumi:"port"`
	// RADIUS secret.
	Xsecret pulumi.StringInput `pulumi:"xsecret"`
}

func (RadiusProfileAcctServerArgs) ElementType 

func (RadiusProfileAcctServerArgs) ElementType() reflect.Type

func (RadiusProfileAcctServerArgs) ToRadiusProfileAcctServerOutput 

func (i RadiusProfileAcctServerArgs) ToRadiusProfileAcctServerOutput() RadiusProfileAcctServerOutput

func (RadiusProfileAcctServerArgs) ToRadiusProfileAcctServerOutputWithContext 

func (i RadiusProfileAcctServerArgs) ToRadiusProfileAcctServerOutputWithContext(ctx context.Context) RadiusProfileAcctServerOutput

type RadiusProfileAcctServerArray 

type RadiusProfileAcctServerArray []RadiusProfileAcctServerInput

func (RadiusProfileAcctServerArray) ElementType 

func (RadiusProfileAcctServerArray) ElementType() reflect.Type

func (RadiusProfileAcctServerArray) ToRadiusProfileAcctServerArrayOutput 

func (i RadiusProfileAcctServerArray) ToRadiusProfileAcctServerArrayOutput() RadiusProfileAcctServerArrayOutput

func (RadiusProfileAcctServerArray) ToRadiusProfileAcctServerArrayOutputWithContext 

func (i RadiusProfileAcctServerArray) ToRadiusProfileAcctServerArrayOutputWithContext(ctx context.Context) RadiusProfileAcctServerArrayOutput

type RadiusProfileAcctServerArrayInput 

type RadiusProfileAcctServerArrayInput interface {
	pulumi.Input

	ToRadiusProfileAcctServerArrayOutput() RadiusProfileAcctServerArrayOutput
	ToRadiusProfileAcctServerArrayOutputWithContext(context.Context) RadiusProfileAcctServerArrayOutput
}

RadiusProfileAcctServerArrayInput is an input type that accepts RadiusProfileAcctServerArray and RadiusProfileAcctServerArrayOutput values. You can construct a concrete instance of `RadiusProfileAcctServerArrayInput` via: 

RadiusProfileAcctServerArray{ RadiusProfileAcctServerArgs{...} }

type RadiusProfileAcctServerArrayOutput 

type RadiusProfileAcctServerArrayOutput struct{ *pulumi.OutputState }

func (RadiusProfileAcctServerArrayOutput) ElementType 

func (RadiusProfileAcctServerArrayOutput) ElementType() reflect.Type

func (RadiusProfileAcctServerArrayOutput) Index 

func (o RadiusProfileAcctServerArrayOutput) Index(i pulumi.IntInput) RadiusProfileAcctServerOutput

func (RadiusProfileAcctServerArrayOutput) ToRadiusProfileAcctServerArrayOutput 

func (o RadiusProfileAcctServerArrayOutput) ToRadiusProfileAcctServerArrayOutput() RadiusProfileAcctServerArrayOutput

func (RadiusProfileAcctServerArrayOutput) ToRadiusProfileAcctServerArrayOutputWithContext 

func (o RadiusProfileAcctServerArrayOutput) ToRadiusProfileAcctServerArrayOutputWithContext(ctx context.Context) RadiusProfileAcctServerArrayOutput

type RadiusProfileAcctServerInput 

type RadiusProfileAcctServerInput interface {
	pulumi.Input

	ToRadiusProfileAcctServerOutput() RadiusProfileAcctServerOutput
	ToRadiusProfileAcctServerOutputWithContext(context.Context) RadiusProfileAcctServerOutput
}

RadiusProfileAcctServerInput is an input type that accepts RadiusProfileAcctServerArgs and RadiusProfileAcctServerOutput values. You can construct a concrete instance of `RadiusProfileAcctServerInput` via: 

RadiusProfileAcctServerArgs{...}

type RadiusProfileAcctServerOutput 

type RadiusProfileAcctServerOutput struct{ *pulumi.OutputState }

func (RadiusProfileAcctServerOutput) ElementType 

func (RadiusProfileAcctServerOutput) ElementType() reflect.Type

func (RadiusProfileAcctServerOutput) Ip 

func (o RadiusProfileAcctServerOutput) Ip() pulumi.StringOutput

IP address of accounting service server.

func (RadiusProfileAcctServerOutput) Port 

func (o RadiusProfileAcctServerOutput) Port() pulumi.IntPtrOutput

Port of accounting service. Defaults to `1813`.

func (RadiusProfileAcctServerOutput) ToRadiusProfileAcctServerOutput 

func (o RadiusProfileAcctServerOutput) ToRadiusProfileAcctServerOutput() RadiusProfileAcctServerOutput

func (RadiusProfileAcctServerOutput) ToRadiusProfileAcctServerOutputWithContext 

func (o RadiusProfileAcctServerOutput) ToRadiusProfileAcctServerOutputWithContext(ctx context.Context) RadiusProfileAcctServerOutput

func (RadiusProfileAcctServerOutput) Xsecret 

func (o RadiusProfileAcctServerOutput) Xsecret() pulumi.StringOutput

RADIUS secret.

type RadiusProfileArgs 

type RadiusProfileArgs struct {
	// Specifies whether to use RADIUS accounting. Defaults to `false`.
	AccountingEnabled pulumi.BoolPtrInput
	// RADIUS accounting servers.
	AcctServers RadiusProfileAcctServerArrayInput
	// RADIUS authentication servers.
	AuthServers RadiusProfileAuthServerArrayInput
	// Specifies whether to use interim_update. Defaults to `false`.
	InterimUpdateEnabled pulumi.BoolPtrInput
	// Specifies interimUpdate interval. Defaults to `3600`.
	InterimUpdateInterval pulumi.IntPtrInput
	// The name of the profile.
	Name pulumi.StringPtrInput
	// The name of the site to associate the settings with.
	Site pulumi.StringPtrInput
	// Specifies whether to use usg as a RADIUS accounting server. Defaults to `false`.
	UseUsgAcctServer pulumi.BoolPtrInput
	// Specifies whether to use usg as a RADIUS authentication server. Defaults to `false`.
	UseUsgAuthServer pulumi.BoolPtrInput
	// Specifies whether to use vlan on wired connections. Defaults to `false`.
	VlanEnabled pulumi.BoolPtrInput
	// Specifies whether to use vlan on wireless connections. Must be one of `disabled`, `optional`, or `required`. Defaults to “.
	VlanWlanMode pulumi.StringPtrInput
}

The set of arguments for constructing a RadiusProfile resource.

func (RadiusProfileArgs) ElementType 

func (RadiusProfileArgs) ElementType() reflect.Type

type RadiusProfileArray 

type RadiusProfileArray []RadiusProfileInput

func (RadiusProfileArray) ElementType 

func (RadiusProfileArray) ElementType() reflect.Type

func (RadiusProfileArray) ToRadiusProfileArrayOutput 

func (i RadiusProfileArray) ToRadiusProfileArrayOutput() RadiusProfileArrayOutput

func (RadiusProfileArray) ToRadiusProfileArrayOutputWithContext 

func (i RadiusProfileArray) ToRadiusProfileArrayOutputWithContext(ctx context.Context) RadiusProfileArrayOutput

type RadiusProfileArrayInput 

type RadiusProfileArrayInput interface {
	pulumi.Input

	ToRadiusProfileArrayOutput() RadiusProfileArrayOutput
	ToRadiusProfileArrayOutputWithContext(context.Context) RadiusProfileArrayOutput
}

RadiusProfileArrayInput is an input type that accepts RadiusProfileArray and RadiusProfileArrayOutput values. You can construct a concrete instance of `RadiusProfileArrayInput` via: 

RadiusProfileArray{ RadiusProfileArgs{...} }

type RadiusProfileArrayOutput 

type RadiusProfileArrayOutput struct{ *pulumi.OutputState }

func (RadiusProfileArrayOutput) ElementType 

func (RadiusProfileArrayOutput) ElementType() reflect.Type

func (RadiusProfileArrayOutput) Index 

func (o RadiusProfileArrayOutput) Index(i pulumi.IntInput) RadiusProfileOutput

func (RadiusProfileArrayOutput) ToRadiusProfileArrayOutput 

func (o RadiusProfileArrayOutput) ToRadiusProfileArrayOutput() RadiusProfileArrayOutput

func (RadiusProfileArrayOutput) ToRadiusProfileArrayOutputWithContext 

func (o RadiusProfileArrayOutput) ToRadiusProfileArrayOutputWithContext(ctx context.Context) RadiusProfileArrayOutput

type RadiusProfileAuthServer 

type RadiusProfileAuthServer struct {
	// IP address of authentication service server.
	Ip string `pulumi:"ip"`
	// Port of authentication service. Defaults to `1812`.
	Port *int `pulumi:"port"`
	// RADIUS secret.
	Xsecret string `pulumi:"xsecret"`
}

type RadiusProfileAuthServerArgs 

type RadiusProfileAuthServerArgs struct {
	// IP address of authentication service server.
	Ip pulumi.StringInput `pulumi:"ip"`
	// Port of authentication service. Defaults to `1812`.
	Port pulumi.IntPtrInput `pulumi:"port"`
	// RADIUS secret.
	Xsecret pulumi.StringInput `pulumi:"xsecret"`
}

func (RadiusProfileAuthServerArgs) ElementType 

func (RadiusProfileAuthServerArgs) ElementType() reflect.Type

func (RadiusProfileAuthServerArgs) ToRadiusProfileAuthServerOutput 

func (i RadiusProfileAuthServerArgs) ToRadiusProfileAuthServerOutput() RadiusProfileAuthServerOutput

func (RadiusProfileAuthServerArgs) ToRadiusProfileAuthServerOutputWithContext 

func (i RadiusProfileAuthServerArgs) ToRadiusProfileAuthServerOutputWithContext(ctx context.Context) RadiusProfileAuthServerOutput

type RadiusProfileAuthServerArray 

type RadiusProfileAuthServerArray []RadiusProfileAuthServerInput

func (RadiusProfileAuthServerArray) ElementType 

func (RadiusProfileAuthServerArray) ElementType() reflect.Type

func (RadiusProfileAuthServerArray) ToRadiusProfileAuthServerArrayOutput 

func (i RadiusProfileAuthServerArray) ToRadiusProfileAuthServerArrayOutput() RadiusProfileAuthServerArrayOutput

func (RadiusProfileAuthServerArray) ToRadiusProfileAuthServerArrayOutputWithContext 

func (i RadiusProfileAuthServerArray) ToRadiusProfileAuthServerArrayOutputWithContext(ctx context.Context) RadiusProfileAuthServerArrayOutput

type RadiusProfileAuthServerArrayInput 

type RadiusProfileAuthServerArrayInput interface {
	pulumi.Input

	ToRadiusProfileAuthServerArrayOutput() RadiusProfileAuthServerArrayOutput
	ToRadiusProfileAuthServerArrayOutputWithContext(context.Context) RadiusProfileAuthServerArrayOutput
}

RadiusProfileAuthServerArrayInput is an input type that accepts RadiusProfileAuthServerArray and RadiusProfileAuthServerArrayOutput values. You can construct a concrete instance of `RadiusProfileAuthServerArrayInput` via: 

RadiusProfileAuthServerArray{ RadiusProfileAuthServerArgs{...} }

type RadiusProfileAuthServerArrayOutput 

type RadiusProfileAuthServerArrayOutput struct{ *pulumi.OutputState }

func (RadiusProfileAuthServerArrayOutput) ElementType 

func (RadiusProfileAuthServerArrayOutput) ElementType() reflect.Type

func (RadiusProfileAuthServerArrayOutput) Index 

func (o RadiusProfileAuthServerArrayOutput) Index(i pulumi.IntInput) RadiusProfileAuthServerOutput

func (RadiusProfileAuthServerArrayOutput) ToRadiusProfileAuthServerArrayOutput 

func (o RadiusProfileAuthServerArrayOutput) ToRadiusProfileAuthServerArrayOutput() RadiusProfileAuthServerArrayOutput

func (RadiusProfileAuthServerArrayOutput) ToRadiusProfileAuthServerArrayOutputWithContext 

func (o RadiusProfileAuthServerArrayOutput) ToRadiusProfileAuthServerArrayOutputWithContext(ctx context.Context) RadiusProfileAuthServerArrayOutput

type RadiusProfileAuthServerInput 

type RadiusProfileAuthServerInput interface {
	pulumi.Input

	ToRadiusProfileAuthServerOutput() RadiusProfileAuthServerOutput
	ToRadiusProfileAuthServerOutputWithContext(context.Context) RadiusProfileAuthServerOutput
}

RadiusProfileAuthServerInput is an input type that accepts RadiusProfileAuthServerArgs and RadiusProfileAuthServerOutput values. You can construct a concrete instance of `RadiusProfileAuthServerInput` via: 

RadiusProfileAuthServerArgs{...}

type RadiusProfileAuthServerOutput 

type RadiusProfileAuthServerOutput struct{ *pulumi.OutputState }

func (RadiusProfileAuthServerOutput) ElementType 

func (RadiusProfileAuthServerOutput) ElementType() reflect.Type

func (RadiusProfileAuthServerOutput) Ip 

func (o RadiusProfileAuthServerOutput) Ip() pulumi.StringOutput

IP address of authentication service server.

func (RadiusProfileAuthServerOutput) Port 

func (o RadiusProfileAuthServerOutput) Port() pulumi.IntPtrOutput

Port of authentication service. Defaults to `1812`.

func (RadiusProfileAuthServerOutput) ToRadiusProfileAuthServerOutput 

func (o RadiusProfileAuthServerOutput) ToRadiusProfileAuthServerOutput() RadiusProfileAuthServerOutput

func (RadiusProfileAuthServerOutput) ToRadiusProfileAuthServerOutputWithContext 

func (o RadiusProfileAuthServerOutput) ToRadiusProfileAuthServerOutputWithContext(ctx context.Context) RadiusProfileAuthServerOutput

func (RadiusProfileAuthServerOutput) Xsecret 

func (o RadiusProfileAuthServerOutput) Xsecret() pulumi.StringOutput

RADIUS secret.

type RadiusProfileInput 

type RadiusProfileInput interface {
	pulumi.Input

	ToRadiusProfileOutput() RadiusProfileOutput
	ToRadiusProfileOutputWithContext(ctx context.Context) RadiusProfileOutput
}

type RadiusProfileMap 

type RadiusProfileMap map[string]RadiusProfileInput

func (RadiusProfileMap) ElementType 

func (RadiusProfileMap) ElementType() reflect.Type

func (RadiusProfileMap) ToRadiusProfileMapOutput 

func (i RadiusProfileMap) ToRadiusProfileMapOutput() RadiusProfileMapOutput

func (RadiusProfileMap) ToRadiusProfileMapOutputWithContext 

func (i RadiusProfileMap) ToRadiusProfileMapOutputWithContext(ctx context.Context) RadiusProfileMapOutput

type RadiusProfileMapInput 

type RadiusProfileMapInput interface {
	pulumi.Input

	ToRadiusProfileMapOutput() RadiusProfileMapOutput
	ToRadiusProfileMapOutputWithContext(context.Context) RadiusProfileMapOutput
}

RadiusProfileMapInput is an input type that accepts RadiusProfileMap and RadiusProfileMapOutput values. You can construct a concrete instance of `RadiusProfileMapInput` via: 

RadiusProfileMap{ "key": RadiusProfileArgs{...} }

type RadiusProfileMapOutput 

type RadiusProfileMapOutput struct{ *pulumi.OutputState }

func (RadiusProfileMapOutput) ElementType 

func (RadiusProfileMapOutput) ElementType() reflect.Type

func (RadiusProfileMapOutput) MapIndex 

func (o RadiusProfileMapOutput) MapIndex(k pulumi.StringInput) RadiusProfileOutput

func (RadiusProfileMapOutput) ToRadiusProfileMapOutput 

func (o RadiusProfileMapOutput) ToRadiusProfileMapOutput() RadiusProfileMapOutput

func (RadiusProfileMapOutput) ToRadiusProfileMapOutputWithContext 

func (o RadiusProfileMapOutput) ToRadiusProfileMapOutputWithContext(ctx context.Context) RadiusProfileMapOutput

type RadiusProfileOutput 

type RadiusProfileOutput struct{ *pulumi.OutputState }

func (RadiusProfileOutput) AccountingEnabled 

func (o RadiusProfileOutput) AccountingEnabled() pulumi.BoolPtrOutput

Specifies whether to use RADIUS accounting. Defaults to `false`.

func (RadiusProfileOutput) AcctServers 

func (o RadiusProfileOutput) AcctServers() RadiusProfileAcctServerArrayOutput

RADIUS accounting servers.

func (RadiusProfileOutput) AuthServers 

func (o RadiusProfileOutput) AuthServers() RadiusProfileAuthServerArrayOutput

RADIUS authentication servers.

func (RadiusProfileOutput) ElementType 

func (RadiusProfileOutput) ElementType() reflect.Type

func (RadiusProfileOutput) InterimUpdateEnabled 

func (o RadiusProfileOutput) InterimUpdateEnabled() pulumi.BoolPtrOutput

Specifies whether to use interim_update. Defaults to `false`.

func (RadiusProfileOutput) InterimUpdateInterval 

func (o RadiusProfileOutput) InterimUpdateInterval() pulumi.IntPtrOutput

Specifies interimUpdate interval. Defaults to `3600`.

func (RadiusProfileOutput) Name 

func (o RadiusProfileOutput) Name() pulumi.StringOutput

The name of the profile.

func (RadiusProfileOutput) Site 

func (o RadiusProfileOutput) Site() pulumi.StringOutput

The name of the site to associate the settings with.

func (RadiusProfileOutput) ToRadiusProfileOutput 

func (o RadiusProfileOutput) ToRadiusProfileOutput() RadiusProfileOutput

func (RadiusProfileOutput) ToRadiusProfileOutputWithContext 

func (o RadiusProfileOutput) ToRadiusProfileOutputWithContext(ctx context.Context) RadiusProfileOutput

func (RadiusProfileOutput) UseUsgAcctServer 

func (o RadiusProfileOutput) UseUsgAcctServer() pulumi.BoolPtrOutput

Specifies whether to use usg as a RADIUS accounting server. Defaults to `false`.

func (RadiusProfileOutput) UseUsgAuthServer 

func (o RadiusProfileOutput) UseUsgAuthServer() pulumi.BoolPtrOutput

Specifies whether to use usg as a RADIUS authentication server. Defaults to `false`.

func (RadiusProfileOutput) VlanEnabled 

func (o RadiusProfileOutput) VlanEnabled() pulumi.BoolPtrOutput

Specifies whether to use vlan on wired connections. Defaults to `false`.

func (RadiusProfileOutput) VlanWlanMode 

func (o RadiusProfileOutput) VlanWlanMode() pulumi.StringPtrOutput

Specifies whether to use vlan on wireless connections. Must be one of `disabled`, `optional`, or `required`. Defaults to “.

type RadiusProfileState 

type RadiusProfileState struct {
	// Specifies whether to use RADIUS accounting. Defaults to `false`.
	AccountingEnabled pulumi.BoolPtrInput
	// RADIUS accounting servers.
	AcctServers RadiusProfileAcctServerArrayInput
	// RADIUS authentication servers.
	AuthServers RadiusProfileAuthServerArrayInput
	// Specifies whether to use interim_update. Defaults to `false`.
	InterimUpdateEnabled pulumi.BoolPtrInput
	// Specifies interimUpdate interval. Defaults to `3600`.
	InterimUpdateInterval pulumi.IntPtrInput
	// The name of the profile.
	Name pulumi.StringPtrInput
	// The name of the site to associate the settings with.
	Site pulumi.StringPtrInput
	// Specifies whether to use usg as a RADIUS accounting server. Defaults to `false`.
	UseUsgAcctServer pulumi.BoolPtrInput
	// Specifies whether to use usg as a RADIUS authentication server. Defaults to `false`.
	UseUsgAuthServer pulumi.BoolPtrInput
	// Specifies whether to use vlan on wired connections. Defaults to `false`.
	VlanEnabled pulumi.BoolPtrInput
	// Specifies whether to use vlan on wireless connections. Must be one of `disabled`, `optional`, or `required`. Defaults to “.
	VlanWlanMode pulumi.StringPtrInput
}

func (RadiusProfileState) ElementType 

func (RadiusProfileState) ElementType() reflect.Type

type Site 

type Site struct {
	pulumi.CustomResourceState

	// The description of the site.
	Description pulumi.StringOutput `pulumi:"description"`
	// The name of the site.
	Name pulumi.StringOutput `pulumi:"name"`
}

`Site` manages Unifi sites

## Example Usage

```go package main

import ( 

"github.com/pulumi/pulumi/sdk/v3/go/pulumi"
"github.com/pulumiverse/pulumi-unifi/sdk/go/unifi"

) 

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		_, err := unifi.NewSite(ctx, "mysite", &unifi.SiteArgs{
			Description: pulumi.String("mysite"),
		})
		if err != nil {
			return err
		}
		return nil
	})
}

```

## Import

import using the API/UI ID

```sh $ pulumi import unifi:index/site:Site mysite 5fe6261995fe130013456a36 ```

import using the name (short ID)

```sh $ pulumi import unifi:index/site:Site mysite vq98kwez ```

func GetSite 

func GetSite(ctx *pulumi.Context,
	name string, id pulumi.IDInput, state *SiteState, opts ...pulumi.ResourceOption) (*Site, error)

GetSite gets an existing Site resource's state with the given name, ID, and optional state properties that are used to uniquely qualify the lookup (nil if not required).

func NewSite 

func NewSite(ctx *pulumi.Context,
	name string, args *SiteArgs, opts ...pulumi.ResourceOption) (*Site, error)

NewSite registers a new resource with the given unique name, arguments, and options.

func (*Site) ElementType 

func (*Site) ElementType() reflect.Type

func (*Site) ToSiteOutput 

func (i *Site) ToSiteOutput() SiteOutput

func (*Site) ToSiteOutputWithContext 

func (i *Site) ToSiteOutputWithContext(ctx context.Context) SiteOutput

type SiteArgs 

type SiteArgs struct {
	// The description of the site.
	Description pulumi.StringInput
}

The set of arguments for constructing a Site resource.

func (SiteArgs) ElementType 

func (SiteArgs) ElementType() reflect.Type

type SiteArray 

type SiteArray []SiteInput

func (SiteArray) ElementType 

func (SiteArray) ElementType() reflect.Type

func (SiteArray) ToSiteArrayOutput 

func (i SiteArray) ToSiteArrayOutput() SiteArrayOutput

func (SiteArray) ToSiteArrayOutputWithContext 

func (i SiteArray) ToSiteArrayOutputWithContext(ctx context.Context) SiteArrayOutput

type SiteArrayInput 

type SiteArrayInput interface {
	pulumi.Input

	ToSiteArrayOutput() SiteArrayOutput
	ToSiteArrayOutputWithContext(context.Context) SiteArrayOutput
}

SiteArrayInput is an input type that accepts SiteArray and SiteArrayOutput values. You can construct a concrete instance of `SiteArrayInput` via: 

SiteArray{ SiteArgs{...} }

type SiteArrayOutput 

type SiteArrayOutput struct{ *pulumi.OutputState }

func (SiteArrayOutput) ElementType 

func (SiteArrayOutput) ElementType() reflect.Type

func (SiteArrayOutput) Index 

func (o SiteArrayOutput) Index(i pulumi.IntInput) SiteOutput

func (SiteArrayOutput) ToSiteArrayOutput 

func (o SiteArrayOutput) ToSiteArrayOutput() SiteArrayOutput

func (SiteArrayOutput) ToSiteArrayOutputWithContext 

func (o SiteArrayOutput) ToSiteArrayOutputWithContext(ctx context.Context) SiteArrayOutput

type SiteInput 

type SiteInput interface {
	pulumi.Input

	ToSiteOutput() SiteOutput
	ToSiteOutputWithContext(ctx context.Context) SiteOutput
}

type SiteMap 

type SiteMap map[string]SiteInput

func (SiteMap) ElementType 

func (SiteMap) ElementType() reflect.Type

func (SiteMap) ToSiteMapOutput 

func (i SiteMap) ToSiteMapOutput() SiteMapOutput

func (SiteMap) ToSiteMapOutputWithContext 

func (i SiteMap) ToSiteMapOutputWithContext(ctx context.Context) SiteMapOutput

type SiteMapInput 

type SiteMapInput interface {
	pulumi.Input

	ToSiteMapOutput() SiteMapOutput
	ToSiteMapOutputWithContext(context.Context) SiteMapOutput
}

SiteMapInput is an input type that accepts SiteMap and SiteMapOutput values. You can construct a concrete instance of `SiteMapInput` via: 

SiteMap{ "key": SiteArgs{...} }

type SiteMapOutput 

type SiteMapOutput struct{ *pulumi.OutputState }

func (SiteMapOutput) ElementType 

func (SiteMapOutput) ElementType() reflect.Type

func (SiteMapOutput) MapIndex 

func (o SiteMapOutput) MapIndex(k pulumi.StringInput) SiteOutput

func (SiteMapOutput) ToSiteMapOutput 

func (o SiteMapOutput) ToSiteMapOutput() SiteMapOutput

func (SiteMapOutput) ToSiteMapOutputWithContext 

func (o SiteMapOutput) ToSiteMapOutputWithContext(ctx context.Context) SiteMapOutput

type SiteOutput 

type SiteOutput struct{ *pulumi.OutputState }

func (SiteOutput) Description 

func (o SiteOutput) Description() pulumi.StringOutput

The description of the site.

func (SiteOutput) ElementType 

func (SiteOutput) ElementType() reflect.Type

func (SiteOutput) Name 

func (o SiteOutput) Name() pulumi.StringOutput

The name of the site.

func (SiteOutput) ToSiteOutput 

func (o SiteOutput) ToSiteOutput() SiteOutput

func (SiteOutput) ToSiteOutputWithContext 

func (o SiteOutput) ToSiteOutputWithContext(ctx context.Context) SiteOutput

type SiteState 

type SiteState struct {
	// The description of the site.
	Description pulumi.StringPtrInput
	// The name of the site.
	Name pulumi.StringPtrInput
}

func (SiteState) ElementType 

func (SiteState) ElementType() reflect.Type

type StaticRoute 

type StaticRoute struct {
	pulumi.CustomResourceState

	// The distance of the static route.
	Distance pulumi.IntOutput `pulumi:"distance"`
	// The interface of the static route (only valid for `interface-route` type). This can be `WAN1`, `WAN2`, or a network ID.
	Interface pulumi.StringPtrOutput `pulumi:"interface"`
	// The name of the static route.
	Name pulumi.StringOutput `pulumi:"name"`
	// The network subnet address.
	Network pulumi.StringOutput `pulumi:"network"`
	// The next hop of the static route (only valid for `nexthop-route` type).
	NextHop pulumi.StringPtrOutput `pulumi:"nextHop"`
	// The name of the site to associate the static route with.
	Site pulumi.StringOutput `pulumi:"site"`
	// The type of static route. Can be `interface-route`, `nexthop-route`, or `blackhole`.
	Type pulumi.StringOutput `pulumi:"type"`
}

`StaticRoute` manages a static route.

## Example Usage

```go package main

import ( 

"github.com/pulumi/pulumi/sdk/v3/go/pulumi"
"github.com/pulumiverse/pulumi-unifi/sdk/go/unifi"

) 

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		_, err := unifi.NewStaticRoute(ctx, "nexthop", &unifi.StaticRouteArgs{
			Type:     pulumi.String("nexthop-route"),
			Network:  pulumi.String("172.17.0.0/16"),
			Name:     pulumi.String("basic nexthop"),
			Distance: pulumi.Int(1),
			NextHop:  pulumi.String("172.16.0.1"),
		})
		if err != nil {
			return err
		}
		_, err = unifi.NewStaticRoute(ctx, "blackhole", &unifi.StaticRouteArgs{
			Type:     pulumi.String("blackhole"),
			Network:  pulumi.Any(blackholeCidr),
			Name:     pulumi.String("blackhole traffice to cidr"),
			Distance: pulumi.Int(1),
		})
		if err != nil {
			return err
		}
		_, err = unifi.NewStaticRoute(ctx, "interface", &unifi.StaticRouteArgs{
			Type:      pulumi.String("interface-route"),
			Network:   pulumi.Any(wan2Cidr),
			Name:      pulumi.String("send traffic over wan2"),
			Distance:  pulumi.Int(1),
			Interface: pulumi.String("WAN2"),
		})
		if err != nil {
			return err
		}
		return nil
	})
}

```

func GetStaticRoute 

func GetStaticRoute(ctx *pulumi.Context,
	name string, id pulumi.IDInput, state *StaticRouteState, opts ...pulumi.ResourceOption) (*StaticRoute, error)

GetStaticRoute gets an existing StaticRoute resource's state with the given name, ID, and optional state properties that are used to uniquely qualify the lookup (nil if not required).

func NewStaticRoute 

func NewStaticRoute(ctx *pulumi.Context,
	name string, args *StaticRouteArgs, opts ...pulumi.ResourceOption) (*StaticRoute, error)

NewStaticRoute registers a new resource with the given unique name, arguments, and options.

func (*StaticRoute) ElementType 

func (*StaticRoute) ElementType() reflect.Type

func (*StaticRoute) ToStaticRouteOutput 

func (i *StaticRoute) ToStaticRouteOutput() StaticRouteOutput

func (*StaticRoute) ToStaticRouteOutputWithContext 

func (i *StaticRoute) ToStaticRouteOutputWithContext(ctx context.Context) StaticRouteOutput

type StaticRouteArgs 

type StaticRouteArgs struct {
	// The distance of the static route.
	Distance pulumi.IntInput
	// The interface of the static route (only valid for `interface-route` type). This can be `WAN1`, `WAN2`, or a network ID.
	Interface pulumi.StringPtrInput
	// The name of the static route.
	Name pulumi.StringPtrInput
	// The network subnet address.
	Network pulumi.StringInput
	// The next hop of the static route (only valid for `nexthop-route` type).
	NextHop pulumi.StringPtrInput
	// The name of the site to associate the static route with.
	Site pulumi.StringPtrInput
	// The type of static route. Can be `interface-route`, `nexthop-route`, or `blackhole`.
	Type pulumi.StringInput
}

The set of arguments for constructing a StaticRoute resource.

func (StaticRouteArgs) ElementType 

func (StaticRouteArgs) ElementType() reflect.Type

type StaticRouteArray 

type StaticRouteArray []StaticRouteInput

func (StaticRouteArray) ElementType 

func (StaticRouteArray) ElementType() reflect.Type

func (StaticRouteArray) ToStaticRouteArrayOutput 

func (i StaticRouteArray) ToStaticRouteArrayOutput() StaticRouteArrayOutput

func (StaticRouteArray) ToStaticRouteArrayOutputWithContext 

func (i StaticRouteArray) ToStaticRouteArrayOutputWithContext(ctx context.Context) StaticRouteArrayOutput

type StaticRouteArrayInput 

type StaticRouteArrayInput interface {
	pulumi.Input

	ToStaticRouteArrayOutput() StaticRouteArrayOutput
	ToStaticRouteArrayOutputWithContext(context.Context) StaticRouteArrayOutput
}

StaticRouteArrayInput is an input type that accepts StaticRouteArray and StaticRouteArrayOutput values. You can construct a concrete instance of `StaticRouteArrayInput` via: 

StaticRouteArray{ StaticRouteArgs{...} }

type StaticRouteArrayOutput 

type StaticRouteArrayOutput struct{ *pulumi.OutputState }

func (StaticRouteArrayOutput) ElementType 

func (StaticRouteArrayOutput) ElementType() reflect.Type

func (StaticRouteArrayOutput) Index 

func (o StaticRouteArrayOutput) Index(i pulumi.IntInput) StaticRouteOutput

func (StaticRouteArrayOutput) ToStaticRouteArrayOutput 

func (o StaticRouteArrayOutput) ToStaticRouteArrayOutput() StaticRouteArrayOutput

func (StaticRouteArrayOutput) ToStaticRouteArrayOutputWithContext 

func (o StaticRouteArrayOutput) ToStaticRouteArrayOutputWithContext(ctx context.Context) StaticRouteArrayOutput

type StaticRouteInput 

type StaticRouteInput interface {
	pulumi.Input

	ToStaticRouteOutput() StaticRouteOutput
	ToStaticRouteOutputWithContext(ctx context.Context) StaticRouteOutput
}

type StaticRouteMap 

type StaticRouteMap map[string]StaticRouteInput

func (StaticRouteMap) ElementType 

func (StaticRouteMap) ElementType() reflect.Type

func (StaticRouteMap) ToStaticRouteMapOutput 

func (i StaticRouteMap) ToStaticRouteMapOutput() StaticRouteMapOutput

func (StaticRouteMap) ToStaticRouteMapOutputWithContext 

func (i StaticRouteMap) ToStaticRouteMapOutputWithContext(ctx context.Context) StaticRouteMapOutput

type StaticRouteMapInput 

type StaticRouteMapInput interface {
	pulumi.Input

	ToStaticRouteMapOutput() StaticRouteMapOutput
	ToStaticRouteMapOutputWithContext(context.Context) StaticRouteMapOutput
}

StaticRouteMapInput is an input type that accepts StaticRouteMap and StaticRouteMapOutput values. You can construct a concrete instance of `StaticRouteMapInput` via: 

StaticRouteMap{ "key": StaticRouteArgs{...} }

type StaticRouteMapOutput 

type StaticRouteMapOutput struct{ *pulumi.OutputState }

func (StaticRouteMapOutput) ElementType 

func (StaticRouteMapOutput) ElementType() reflect.Type

func (StaticRouteMapOutput) MapIndex 

func (o StaticRouteMapOutput) MapIndex(k pulumi.StringInput) StaticRouteOutput

func (StaticRouteMapOutput) ToStaticRouteMapOutput 

func (o StaticRouteMapOutput) ToStaticRouteMapOutput() StaticRouteMapOutput

func (StaticRouteMapOutput) ToStaticRouteMapOutputWithContext 

func (o StaticRouteMapOutput) ToStaticRouteMapOutputWithContext(ctx context.Context) StaticRouteMapOutput

type StaticRouteOutput 

type StaticRouteOutput struct{ *pulumi.OutputState }

func (StaticRouteOutput) Distance 

func (o StaticRouteOutput) Distance() pulumi.IntOutput

The distance of the static route.

func (StaticRouteOutput) ElementType 

func (StaticRouteOutput) ElementType() reflect.Type

func (StaticRouteOutput) Interface 

func (o StaticRouteOutput) Interface() pulumi.StringPtrOutput

The interface of the static route (only valid for `interface-route` type). This can be `WAN1`, `WAN2`, or a network ID.

func (StaticRouteOutput) Name 

func (o StaticRouteOutput) Name() pulumi.StringOutput

The name of the static route.

func (StaticRouteOutput) Network 

func (o StaticRouteOutput) Network() pulumi.StringOutput

The network subnet address.

func (StaticRouteOutput) NextHop 

func (o StaticRouteOutput) NextHop() pulumi.StringPtrOutput

The next hop of the static route (only valid for `nexthop-route` type).

func (StaticRouteOutput) Site 

func (o StaticRouteOutput) Site() pulumi.StringOutput

The name of the site to associate the static route with.

func (StaticRouteOutput) ToStaticRouteOutput 

func (o StaticRouteOutput) ToStaticRouteOutput() StaticRouteOutput

func (StaticRouteOutput) ToStaticRouteOutputWithContext 

func (o StaticRouteOutput) ToStaticRouteOutputWithContext(ctx context.Context) StaticRouteOutput

func (StaticRouteOutput) Type 

func (o StaticRouteOutput) Type() pulumi.StringOutput

The type of static route. Can be `interface-route`, `nexthop-route`, or `blackhole`.

type StaticRouteState 

type StaticRouteState struct {
	// The distance of the static route.
	Distance pulumi.IntPtrInput
	// The interface of the static route (only valid for `interface-route` type). This can be `WAN1`, `WAN2`, or a network ID.
	Interface pulumi.StringPtrInput
	// The name of the static route.
	Name pulumi.StringPtrInput
	// The network subnet address.
	Network pulumi.StringPtrInput
	// The next hop of the static route (only valid for `nexthop-route` type).
	NextHop pulumi.StringPtrInput
	// The name of the site to associate the static route with.
	Site pulumi.StringPtrInput
	// The type of static route. Can be `interface-route`, `nexthop-route`, or `blackhole`.
	Type pulumi.StringPtrInput
}

func (StaticRouteState) ElementType 

func (StaticRouteState) ElementType() reflect.Type

type Wlan 

type Wlan struct {
	pulumi.CustomResourceState

	// IDs of the AP groups to use for this network.
	ApGroupIds pulumi.StringArrayOutput `pulumi:"apGroupIds"`
	// Improves client transitions between APs when they have a weak signal. Defaults to `true`.
	BssTransition pulumi.BoolPtrOutput `pulumi:"bssTransition"`
	// Enables 802.11r fast roaming. Defaults to `false`.
	FastRoamingEnabled pulumi.BoolPtrOutput `pulumi:"fastRoamingEnabled"`
	// Indicates whether or not to hide the SSID from broadcast.
	HideSsid pulumi.BoolPtrOutput `pulumi:"hideSsid"`
	// Indicates that this is a guest WLAN and should use guest behaviors.
	IsGuest pulumi.BoolPtrOutput `pulumi:"isGuest"`
	// Isolates stations on layer 2 (ethernet) level. Defaults to `false`.
	L2Isolation pulumi.BoolPtrOutput `pulumi:"l2Isolation"`
	// Indicates whether or not the MAC filter is turned of for the network.
	MacFilterEnabled pulumi.BoolPtrOutput `pulumi:"macFilterEnabled"`
	// List of MAC addresses to filter (only valid if `macFilterEnabled` is `true`).
	MacFilterLists pulumi.StringArrayOutput `pulumi:"macFilterLists"`
	// MAC address filter policy (only valid if `macFilterEnabled` is `true`). Defaults to `deny`.
	MacFilterPolicy pulumi.StringPtrOutput `pulumi:"macFilterPolicy"`
	// Set minimum data rate control for 2G devices, in Kbps. Use `0` to disable minimum data rates. Valid values are: `1000`, `2000`, `5500`, `6000`, `9000`, `11000`, `12000`, `18000`, `24000`, `36000`, `48000`,  and `54000`.
	MinimumDataRate2gKbps pulumi.IntPtrOutput `pulumi:"minimumDataRate2gKbps"`
	// Set minimum data rate control for 5G devices, in Kbps. Use `0` to disable minimum data rates. Valid values are: `6000`, `9000`, `12000`, `18000`, `24000`, `36000`, `48000`,  and `54000`.
	MinimumDataRate5gKbps pulumi.IntPtrOutput `pulumi:"minimumDataRate5gKbps"`
	// Indicates whether or not Multicast Enhance is turned of for the network.
	MulticastEnhance pulumi.BoolPtrOutput `pulumi:"multicastEnhance"`
	// The SSID of the network.
	Name pulumi.StringOutput `pulumi:"name"`
	// ID of the network for this SSID
	NetworkId pulumi.StringPtrOutput `pulumi:"networkId"`
	// Connect high performance clients to 5 GHz only. Defaults to `true`.
	No2ghzOui pulumi.BoolPtrOutput `pulumi:"no2ghzOui"`
	// The passphrase for the network, this is only required if `security` is not set to `open`.
	Passphrase pulumi.StringPtrOutput `pulumi:"passphrase"`
	// Enable Protected Management Frames. This cannot be disabled if using WPA 3. Valid values are `required`, `optional` and `disabled`. Defaults to `disabled`.
	PmfMode pulumi.StringPtrOutput `pulumi:"pmfMode"`
	// Reduces airtime usage by allowing APs to "proxy" common broadcast frames as unicast. Defaults to `false`.
	ProxyArp pulumi.BoolPtrOutput `pulumi:"proxyArp"`
	// ID of the RADIUS profile to use when security `wpaeap`. You can query this via the `RadiusProfile` data source.
	RadiusProfileId pulumi.StringPtrOutput `pulumi:"radiusProfileId"`
	// Start and stop schedules for the WLAN
	Schedules WlanScheduleArrayOutput `pulumi:"schedules"`
	// The type of WiFi security for this network. Valid values are: `wpapsk`, `wpaeap`, and `open`.
	Security pulumi.StringOutput `pulumi:"security"`
	// The name of the site to associate the wlan with.
	Site pulumi.StringOutput `pulumi:"site"`
	// Enable Unscheduled Automatic Power Save Delivery. Defaults to `false`.
	Uapsd pulumi.BoolPtrOutput `pulumi:"uapsd"`
	// ID of the user group to use for this network.
	UserGroupId pulumi.StringOutput `pulumi:"userGroupId"`
	// Radio band your WiFi network will use. Defaults to `both`.
	WlanBand pulumi.StringPtrOutput `pulumi:"wlanBand"`
	// Enable WPA 3 support (security must be `wpapsk` and PMF must be turned on).
	Wpa3Support pulumi.BoolPtrOutput `pulumi:"wpa3Support"`
	// Enable WPA 3 and WPA 2 support (security must be `wpapsk` and `wpa3Support` must be true).
	Wpa3Transition pulumi.BoolPtrOutput `pulumi:"wpa3Transition"`
}

`Wlan` manages a WiFi network / SSID.

## Example Usage

```go package main

import ( 

"github.com/pulumi/pulumi/sdk/v3/go/pulumi"
"github.com/pulumi/pulumi/sdk/v3/go/pulumi/config"
"github.com/pulumiverse/pulumi-unifi/sdk/go/unifi"
"github.com/pulumiverse/pulumi-unifi/sdk/go/unifi/iam"

) 

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		cfg := config.New(ctx, "")
		vlanId := float64(10)
		if param := cfg.GetFloat64("vlanId"); param != 0 {
			vlanId = param
		}
		_default, err := unifi.GetApGroup(ctx, nil, nil)
		if err != nil {
			return err
		}
		defaultGetGroup, err := iam.LookupGroup(ctx, nil, nil)
		if err != nil {
			return err
		}
		vlan, err := unifi.NewNetwork(ctx, "vlan", &unifi.NetworkArgs{
			Name:        pulumi.String("wifi-vlan"),
			Purpose:     pulumi.String("corporate"),
			Subnet:      pulumi.String("10.0.0.1/24"),
			VlanId:      pulumi.Float64(vlanId),
			DhcpStart:   pulumi.String("10.0.0.6"),
			DhcpStop:    pulumi.String("10.0.0.254"),
			DhcpEnabled: pulumi.Bool(true),
		})
		if err != nil {
			return err
		}
		_, err = unifi.NewWlan(ctx, "wifi", &unifi.WlanArgs{
			Name:           pulumi.String("myssid"),
			Passphrase:     pulumi.String("12345678"),
			Security:       pulumi.String("wpapsk"),
			Wpa3Support:    pulumi.Bool(true),
			Wpa3Transition: pulumi.Bool(true),
			PmfMode:        pulumi.String("optional"),
			NetworkId:      vlan.ID(),
			ApGroupIds: pulumi.StringArray{
				pulumi.String(_default.Id),
			},
			UserGroupId: pulumi.String(defaultGetGroup.Id),
		})
		if err != nil {
			return err
		}
		return nil
	})
}

```

## Import

import from provider configured site

```sh $ pulumi import unifi:index/wlan:Wlan mywlan 5dc28e5e9106d105bdc87217 ```

import from another site

```sh $ pulumi import unifi:index/wlan:Wlan mywlan bfa2l6i7:5dc28e5e9106d105bdc87217 ```

func GetWlan 

func GetWlan(ctx *pulumi.Context,
	name string, id pulumi.IDInput, state *WlanState, opts ...pulumi.ResourceOption) (*Wlan, error)

GetWlan gets an existing Wlan resource's state with the given name, ID, and optional state properties that are used to uniquely qualify the lookup (nil if not required).

func NewWlan 

func NewWlan(ctx *pulumi.Context,
	name string, args *WlanArgs, opts ...pulumi.ResourceOption) (*Wlan, error)

NewWlan registers a new resource with the given unique name, arguments, and options.

func (*Wlan) ElementType 

func (*Wlan) ElementType() reflect.Type

func (*Wlan) ToWlanOutput 

func (i *Wlan) ToWlanOutput() WlanOutput

func (*Wlan) ToWlanOutputWithContext 

func (i *Wlan) ToWlanOutputWithContext(ctx context.Context) WlanOutput

type WlanArgs 

type WlanArgs struct {
	// IDs of the AP groups to use for this network.
	ApGroupIds pulumi.StringArrayInput
	// Improves client transitions between APs when they have a weak signal. Defaults to `true`.
	BssTransition pulumi.BoolPtrInput
	// Enables 802.11r fast roaming. Defaults to `false`.
	FastRoamingEnabled pulumi.BoolPtrInput
	// Indicates whether or not to hide the SSID from broadcast.
	HideSsid pulumi.BoolPtrInput
	// Indicates that this is a guest WLAN and should use guest behaviors.
	IsGuest pulumi.BoolPtrInput
	// Isolates stations on layer 2 (ethernet) level. Defaults to `false`.
	L2Isolation pulumi.BoolPtrInput
	// Indicates whether or not the MAC filter is turned of for the network.
	MacFilterEnabled pulumi.BoolPtrInput
	// List of MAC addresses to filter (only valid if `macFilterEnabled` is `true`).
	MacFilterLists pulumi.StringArrayInput
	// MAC address filter policy (only valid if `macFilterEnabled` is `true`). Defaults to `deny`.
	MacFilterPolicy pulumi.StringPtrInput
	// Set minimum data rate control for 2G devices, in Kbps. Use `0` to disable minimum data rates. Valid values are: `1000`, `2000`, `5500`, `6000`, `9000`, `11000`, `12000`, `18000`, `24000`, `36000`, `48000`,  and `54000`.
	MinimumDataRate2gKbps pulumi.IntPtrInput
	// Set minimum data rate control for 5G devices, in Kbps. Use `0` to disable minimum data rates. Valid values are: `6000`, `9000`, `12000`, `18000`, `24000`, `36000`, `48000`,  and `54000`.
	MinimumDataRate5gKbps pulumi.IntPtrInput
	// Indicates whether or not Multicast Enhance is turned of for the network.
	MulticastEnhance pulumi.BoolPtrInput
	// The SSID of the network.
	Name pulumi.StringPtrInput
	// ID of the network for this SSID
	NetworkId pulumi.StringPtrInput
	// Connect high performance clients to 5 GHz only. Defaults to `true`.
	No2ghzOui pulumi.BoolPtrInput
	// The passphrase for the network, this is only required if `security` is not set to `open`.
	Passphrase pulumi.StringPtrInput
	// Enable Protected Management Frames. This cannot be disabled if using WPA 3. Valid values are `required`, `optional` and `disabled`. Defaults to `disabled`.
	PmfMode pulumi.StringPtrInput
	// Reduces airtime usage by allowing APs to "proxy" common broadcast frames as unicast. Defaults to `false`.
	ProxyArp pulumi.BoolPtrInput
	// ID of the RADIUS profile to use when security `wpaeap`. You can query this via the `RadiusProfile` data source.
	RadiusProfileId pulumi.StringPtrInput
	// Start and stop schedules for the WLAN
	Schedules WlanScheduleArrayInput
	// The type of WiFi security for this network. Valid values are: `wpapsk`, `wpaeap`, and `open`.
	Security pulumi.StringInput
	// The name of the site to associate the wlan with.
	Site pulumi.StringPtrInput
	// Enable Unscheduled Automatic Power Save Delivery. Defaults to `false`.
	Uapsd pulumi.BoolPtrInput
	// ID of the user group to use for this network.
	UserGroupId pulumi.StringInput
	// Radio band your WiFi network will use. Defaults to `both`.
	WlanBand pulumi.StringPtrInput
	// Enable WPA 3 support (security must be `wpapsk` and PMF must be turned on).
	Wpa3Support pulumi.BoolPtrInput
	// Enable WPA 3 and WPA 2 support (security must be `wpapsk` and `wpa3Support` must be true).
	Wpa3Transition pulumi.BoolPtrInput
}

The set of arguments for constructing a Wlan resource.

func (WlanArgs) ElementType 

func (WlanArgs) ElementType() reflect.Type

type WlanArray 

type WlanArray []WlanInput

func (WlanArray) ElementType 

func (WlanArray) ElementType() reflect.Type

func (WlanArray) ToWlanArrayOutput 

func (i WlanArray) ToWlanArrayOutput() WlanArrayOutput

func (WlanArray) ToWlanArrayOutputWithContext 

func (i WlanArray) ToWlanArrayOutputWithContext(ctx context.Context) WlanArrayOutput

type WlanArrayInput 

type WlanArrayInput interface {
	pulumi.Input

	ToWlanArrayOutput() WlanArrayOutput
	ToWlanArrayOutputWithContext(context.Context) WlanArrayOutput
}

WlanArrayInput is an input type that accepts WlanArray and WlanArrayOutput values. You can construct a concrete instance of `WlanArrayInput` via: 

WlanArray{ WlanArgs{...} }

type WlanArrayOutput 

type WlanArrayOutput struct{ *pulumi.OutputState }

func (WlanArrayOutput) ElementType 

func (WlanArrayOutput) ElementType() reflect.Type

func (WlanArrayOutput) Index 

func (o WlanArrayOutput) Index(i pulumi.IntInput) WlanOutput

func (WlanArrayOutput) ToWlanArrayOutput 

func (o WlanArrayOutput) ToWlanArrayOutput() WlanArrayOutput

func (WlanArrayOutput) ToWlanArrayOutputWithContext 

func (o WlanArrayOutput) ToWlanArrayOutputWithContext(ctx context.Context) WlanArrayOutput

type WlanInput 

type WlanInput interface {
	pulumi.Input

	ToWlanOutput() WlanOutput
	ToWlanOutputWithContext(ctx context.Context) WlanOutput
}

type WlanMap 

type WlanMap map[string]WlanInput

func (WlanMap) ElementType 

func (WlanMap) ElementType() reflect.Type

func (WlanMap) ToWlanMapOutput 

func (i WlanMap) ToWlanMapOutput() WlanMapOutput

func (WlanMap) ToWlanMapOutputWithContext 

func (i WlanMap) ToWlanMapOutputWithContext(ctx context.Context) WlanMapOutput

type WlanMapInput 

type WlanMapInput interface {
	pulumi.Input

	ToWlanMapOutput() WlanMapOutput
	ToWlanMapOutputWithContext(context.Context) WlanMapOutput
}

WlanMapInput is an input type that accepts WlanMap and WlanMapOutput values. You can construct a concrete instance of `WlanMapInput` via: 

WlanMap{ "key": WlanArgs{...} }

type WlanMapOutput 

type WlanMapOutput struct{ *pulumi.OutputState }

func (WlanMapOutput) ElementType 

func (WlanMapOutput) ElementType() reflect.Type

func (WlanMapOutput) MapIndex 

func (o WlanMapOutput) MapIndex(k pulumi.StringInput) WlanOutput

func (WlanMapOutput) ToWlanMapOutput 

func (o WlanMapOutput) ToWlanMapOutput() WlanMapOutput

func (WlanMapOutput) ToWlanMapOutputWithContext 

func (o WlanMapOutput) ToWlanMapOutputWithContext(ctx context.Context) WlanMapOutput

type WlanOutput 

type WlanOutput struct{ *pulumi.OutputState }

func (WlanOutput) ApGroupIds 

func (o WlanOutput) ApGroupIds() pulumi.StringArrayOutput

IDs of the AP groups to use for this network.

func (WlanOutput) BssTransition 

func (o WlanOutput) BssTransition() pulumi.BoolPtrOutput

Improves client transitions between APs when they have a weak signal. Defaults to `true`.

func (WlanOutput) ElementType 

func (WlanOutput) ElementType() reflect.Type

func (WlanOutput) FastRoamingEnabled 

func (o WlanOutput) FastRoamingEnabled() pulumi.BoolPtrOutput

Enables 802.11r fast roaming. Defaults to `false`.

func (WlanOutput) HideSsid 

func (o WlanOutput) HideSsid() pulumi.BoolPtrOutput

Indicates whether or not to hide the SSID from broadcast.

func (WlanOutput) IsGuest 

func (o WlanOutput) IsGuest() pulumi.BoolPtrOutput

Indicates that this is a guest WLAN and should use guest behaviors.

func (WlanOutput) L2Isolation 

func (o WlanOutput) L2Isolation() pulumi.BoolPtrOutput

Isolates stations on layer 2 (ethernet) level. Defaults to `false`.

func (WlanOutput) MacFilterEnabled 

func (o WlanOutput) MacFilterEnabled() pulumi.BoolPtrOutput

Indicates whether or not the MAC filter is turned of for the network.

func (WlanOutput) MacFilterLists 

func (o WlanOutput) MacFilterLists() pulumi.StringArrayOutput

List of MAC addresses to filter (only valid if `macFilterEnabled` is `true`).

func (WlanOutput) MacFilterPolicy 

func (o WlanOutput) MacFilterPolicy() pulumi.StringPtrOutput

MAC address filter policy (only valid if `macFilterEnabled` is `true`). Defaults to `deny`.

func (WlanOutput) MinimumDataRate2gKbps 

func (o WlanOutput) MinimumDataRate2gKbps() pulumi.IntPtrOutput

Set minimum data rate control for 2G devices, in Kbps. Use `0` to disable minimum data rates. Valid values are: `1000`, `2000`, `5500`, `6000`, `9000`, `11000`, `12000`, `18000`, `24000`, `36000`, `48000`, and `54000`.

func (WlanOutput) MinimumDataRate5gKbps 

func (o WlanOutput) MinimumDataRate5gKbps() pulumi.IntPtrOutput

Set minimum data rate control for 5G devices, in Kbps. Use `0` to disable minimum data rates. Valid values are: `6000`, `9000`, `12000`, `18000`, `24000`, `36000`, `48000`, and `54000`.

func (WlanOutput) MulticastEnhance 

func (o WlanOutput) MulticastEnhance() pulumi.BoolPtrOutput

Indicates whether or not Multicast Enhance is turned of for the network.

func (WlanOutput) Name 

func (o WlanOutput) Name() pulumi.StringOutput

The SSID of the network.

func (WlanOutput) NetworkId 

func (o WlanOutput) NetworkId() pulumi.StringPtrOutput

ID of the network for this SSID

func (WlanOutput) No2ghzOui 

func (o WlanOutput) No2ghzOui() pulumi.BoolPtrOutput

Connect high performance clients to 5 GHz only. Defaults to `true`.

func (WlanOutput) Passphrase 

func (o WlanOutput) Passphrase() pulumi.StringPtrOutput

The passphrase for the network, this is only required if `security` is not set to `open`.

func (WlanOutput) PmfMode 

func (o WlanOutput) PmfMode() pulumi.StringPtrOutput

Enable Protected Management Frames. This cannot be disabled if using WPA 3. Valid values are `required`, `optional` and `disabled`. Defaults to `disabled`.

func (WlanOutput) ProxyArp 

func (o WlanOutput) ProxyArp() pulumi.BoolPtrOutput

Reduces airtime usage by allowing APs to "proxy" common broadcast frames as unicast. Defaults to `false`.

func (WlanOutput) RadiusProfileId 

func (o WlanOutput) RadiusProfileId() pulumi.StringPtrOutput

ID of the RADIUS profile to use when security `wpaeap`. You can query this via the `RadiusProfile` data source.

func (WlanOutput) Schedules 

func (o WlanOutput) Schedules() WlanScheduleArrayOutput

Start and stop schedules for the WLAN

func (WlanOutput) Security 

func (o WlanOutput) Security() pulumi.StringOutput

The type of WiFi security for this network. Valid values are: `wpapsk`, `wpaeap`, and `open`.

func (WlanOutput) Site 

func (o WlanOutput) Site() pulumi.StringOutput

The name of the site to associate the wlan with.

func (WlanOutput) ToWlanOutput 

func (o WlanOutput) ToWlanOutput() WlanOutput

func (WlanOutput) ToWlanOutputWithContext 

func (o WlanOutput) ToWlanOutputWithContext(ctx context.Context) WlanOutput

func (WlanOutput) Uapsd 

func (o WlanOutput) Uapsd() pulumi.BoolPtrOutput

Enable Unscheduled Automatic Power Save Delivery. Defaults to `false`.

func (WlanOutput) UserGroupId 

func (o WlanOutput) UserGroupId() pulumi.StringOutput

ID of the user group to use for this network.

func (WlanOutput) WlanBand 

func (o WlanOutput) WlanBand() pulumi.StringPtrOutput

Radio band your WiFi network will use. Defaults to `both`.

func (WlanOutput) Wpa3Support 

func (o WlanOutput) Wpa3Support() pulumi.BoolPtrOutput

Enable WPA 3 support (security must be `wpapsk` and PMF must be turned on).

func (WlanOutput) Wpa3Transition 

func (o WlanOutput) Wpa3Transition() pulumi.BoolPtrOutput

Enable WPA 3 and WPA 2 support (security must be `wpapsk` and `wpa3Support` must be true).

type WlanSchedule 

type WlanSchedule struct {
	// Day of week for the block. Valid values are `sun`, `mon`, `tue`, `wed`, `thu`, `fri`, `sat`.
	DayOfWeek string `pulumi:"dayOfWeek"`
	// Length of the block in minutes.
	Duration int `pulumi:"duration"`
	// Name of the block.
	Name *string `pulumi:"name"`
	// Start hour for the block (0-23).
	StartHour int `pulumi:"startHour"`
	// Start minute for the block (0-59). Defaults to `0`.
	StartMinute *int `pulumi:"startMinute"`
}

type WlanScheduleArgs 

type WlanScheduleArgs struct {
	// Day of week for the block. Valid values are `sun`, `mon`, `tue`, `wed`, `thu`, `fri`, `sat`.
	DayOfWeek pulumi.StringInput `pulumi:"dayOfWeek"`
	// Length of the block in minutes.
	Duration pulumi.IntInput `pulumi:"duration"`
	// Name of the block.
	Name pulumi.StringPtrInput `pulumi:"name"`
	// Start hour for the block (0-23).
	StartHour pulumi.IntInput `pulumi:"startHour"`
	// Start minute for the block (0-59). Defaults to `0`.
	StartMinute pulumi.IntPtrInput `pulumi:"startMinute"`
}

func (WlanScheduleArgs) ElementType 

func (WlanScheduleArgs) ElementType() reflect.Type

func (WlanScheduleArgs) ToWlanScheduleOutput 

func (i WlanScheduleArgs) ToWlanScheduleOutput() WlanScheduleOutput

func (WlanScheduleArgs) ToWlanScheduleOutputWithContext 

func (i WlanScheduleArgs) ToWlanScheduleOutputWithContext(ctx context.Context) WlanScheduleOutput

type WlanScheduleArray 

type WlanScheduleArray []WlanScheduleInput

func (WlanScheduleArray) ElementType 

func (WlanScheduleArray) ElementType() reflect.Type

func (WlanScheduleArray) ToWlanScheduleArrayOutput 

func (i WlanScheduleArray) ToWlanScheduleArrayOutput() WlanScheduleArrayOutput

func (WlanScheduleArray) ToWlanScheduleArrayOutputWithContext 

func (i WlanScheduleArray) ToWlanScheduleArrayOutputWithContext(ctx context.Context) WlanScheduleArrayOutput

type WlanScheduleArrayInput 

type WlanScheduleArrayInput interface {
	pulumi.Input

	ToWlanScheduleArrayOutput() WlanScheduleArrayOutput
	ToWlanScheduleArrayOutputWithContext(context.Context) WlanScheduleArrayOutput
}

WlanScheduleArrayInput is an input type that accepts WlanScheduleArray and WlanScheduleArrayOutput values. You can construct a concrete instance of `WlanScheduleArrayInput` via: 

WlanScheduleArray{ WlanScheduleArgs{...} }

type WlanScheduleArrayOutput 

type WlanScheduleArrayOutput struct{ *pulumi.OutputState }

func (WlanScheduleArrayOutput) ElementType 

func (WlanScheduleArrayOutput) ElementType() reflect.Type

func (WlanScheduleArrayOutput) Index 

func (o WlanScheduleArrayOutput) Index(i pulumi.IntInput) WlanScheduleOutput

func (WlanScheduleArrayOutput) ToWlanScheduleArrayOutput 

func (o WlanScheduleArrayOutput) ToWlanScheduleArrayOutput() WlanScheduleArrayOutput

func (WlanScheduleArrayOutput) ToWlanScheduleArrayOutputWithContext 

func (o WlanScheduleArrayOutput) ToWlanScheduleArrayOutputWithContext(ctx context.Context) WlanScheduleArrayOutput

type WlanScheduleInput 

type WlanScheduleInput interface {
	pulumi.Input

	ToWlanScheduleOutput() WlanScheduleOutput
	ToWlanScheduleOutputWithContext(context.Context) WlanScheduleOutput
}

WlanScheduleInput is an input type that accepts WlanScheduleArgs and WlanScheduleOutput values. You can construct a concrete instance of `WlanScheduleInput` via: 

WlanScheduleArgs{...}

type WlanScheduleOutput 

type WlanScheduleOutput struct{ *pulumi.OutputState }

func (WlanScheduleOutput) DayOfWeek 

func (o WlanScheduleOutput) DayOfWeek() pulumi.StringOutput

Day of week for the block. Valid values are `sun`, `mon`, `tue`, `wed`, `thu`, `fri`, `sat`.

func (WlanScheduleOutput) Duration 

func (o WlanScheduleOutput) Duration() pulumi.IntOutput

Length of the block in minutes.

func (WlanScheduleOutput) ElementType 

func (WlanScheduleOutput) ElementType() reflect.Type

func (WlanScheduleOutput) Name 

func (o WlanScheduleOutput) Name() pulumi.StringPtrOutput

Name of the block.

func (WlanScheduleOutput) StartHour 

func (o WlanScheduleOutput) StartHour() pulumi.IntOutput

Start hour for the block (0-23).

func (WlanScheduleOutput) StartMinute 

func (o WlanScheduleOutput) StartMinute() pulumi.IntPtrOutput

Start minute for the block (0-59). Defaults to `0`.

func (WlanScheduleOutput) ToWlanScheduleOutput 

func (o WlanScheduleOutput) ToWlanScheduleOutput() WlanScheduleOutput

func (WlanScheduleOutput) ToWlanScheduleOutputWithContext 

func (o WlanScheduleOutput) ToWlanScheduleOutputWithContext(ctx context.Context) WlanScheduleOutput

type WlanState 

type WlanState struct {
	// IDs of the AP groups to use for this network.
	ApGroupIds pulumi.StringArrayInput
	// Improves client transitions between APs when they have a weak signal. Defaults to `true`.
	BssTransition pulumi.BoolPtrInput
	// Enables 802.11r fast roaming. Defaults to `false`.
	FastRoamingEnabled pulumi.BoolPtrInput
	// Indicates whether or not to hide the SSID from broadcast.
	HideSsid pulumi.BoolPtrInput
	// Indicates that this is a guest WLAN and should use guest behaviors.
	IsGuest pulumi.BoolPtrInput
	// Isolates stations on layer 2 (ethernet) level. Defaults to `false`.
	L2Isolation pulumi.BoolPtrInput
	// Indicates whether or not the MAC filter is turned of for the network.
	MacFilterEnabled pulumi.BoolPtrInput
	// List of MAC addresses to filter (only valid if `macFilterEnabled` is `true`).
	MacFilterLists pulumi.StringArrayInput
	// MAC address filter policy (only valid if `macFilterEnabled` is `true`). Defaults to `deny`.
	MacFilterPolicy pulumi.StringPtrInput
	// Set minimum data rate control for 2G devices, in Kbps. Use `0` to disable minimum data rates. Valid values are: `1000`, `2000`, `5500`, `6000`, `9000`, `11000`, `12000`, `18000`, `24000`, `36000`, `48000`,  and `54000`.
	MinimumDataRate2gKbps pulumi.IntPtrInput
	// Set minimum data rate control for 5G devices, in Kbps. Use `0` to disable minimum data rates. Valid values are: `6000`, `9000`, `12000`, `18000`, `24000`, `36000`, `48000`,  and `54000`.
	MinimumDataRate5gKbps pulumi.IntPtrInput
	// Indicates whether or not Multicast Enhance is turned of for the network.
	MulticastEnhance pulumi.BoolPtrInput
	// The SSID of the network.
	Name pulumi.StringPtrInput
	// ID of the network for this SSID
	NetworkId pulumi.StringPtrInput
	// Connect high performance clients to 5 GHz only. Defaults to `true`.
	No2ghzOui pulumi.BoolPtrInput
	// The passphrase for the network, this is only required if `security` is not set to `open`.
	Passphrase pulumi.StringPtrInput
	// Enable Protected Management Frames. This cannot be disabled if using WPA 3. Valid values are `required`, `optional` and `disabled`. Defaults to `disabled`.
	PmfMode pulumi.StringPtrInput
	// Reduces airtime usage by allowing APs to "proxy" common broadcast frames as unicast. Defaults to `false`.
	ProxyArp pulumi.BoolPtrInput
	// ID of the RADIUS profile to use when security `wpaeap`. You can query this via the `RadiusProfile` data source.
	RadiusProfileId pulumi.StringPtrInput
	// Start and stop schedules for the WLAN
	Schedules WlanScheduleArrayInput
	// The type of WiFi security for this network. Valid values are: `wpapsk`, `wpaeap`, and `open`.
	Security pulumi.StringPtrInput
	// The name of the site to associate the wlan with.
	Site pulumi.StringPtrInput
	// Enable Unscheduled Automatic Power Save Delivery. Defaults to `false`.
	Uapsd pulumi.BoolPtrInput
	// ID of the user group to use for this network.
	UserGroupId pulumi.StringPtrInput
	// Radio band your WiFi network will use. Defaults to `both`.
	WlanBand pulumi.StringPtrInput
	// Enable WPA 3 support (security must be `wpapsk` and PMF must be turned on).
	Wpa3Support pulumi.BoolPtrInput
	// Enable WPA 3 and WPA 2 support (security must be `wpapsk` and `wpa3Support` must be true).
	Wpa3Transition pulumi.BoolPtrInput
}

func (WlanState) ElementType 

func (WlanState) ElementType() reflect.Type

Source Files

View all Source files

Directories

Path Synopsis

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.