networking

package
v0.0.2 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Mar 24, 2024 License: Apache-2.0 Imports: 7 Imported by: 0

Documentation

Index

Constants

This section is empty.

Variables

This section is empty.

Functions

This section is empty.

Types

type InterfacePort 

type InterfacePort struct {
	pulumi.CustomResourceState

	// Alias will be displayed with the interface name to make it easier to distinguish.
	Alias pulumi.StringOutput `pulumi:"alias"`
	// Permitted types of management access to this interface.
	Allowaccess pulumi.StringOutput `pulumi:"allowaccess"`
	// Enable to get the gateway IP from the DHCP or PPPoE server.
	Defaultgw pulumi.StringOutput `pulumi:"defaultgw"`
	// Description.
	Description pulumi.StringPtrOutput `pulumi:"description"`
	// Enable/disable passively gathering of device identity information about the devices on the network connected to this interface.
	DeviceIdentification pulumi.StringOutput `pulumi:"deviceIdentification"`
	// Distance for routes learned through PPPoE or DHCP, lower distance indicates preferred route.
	Distance pulumi.StringOutput `pulumi:"distance"`
	// Enable/disable use DNS acquired by DHCP or PPPoE.
	DnsServerOverride pulumi.StringOutput `pulumi:"dnsServerOverride"`
	// Interface name.
	Interface pulumi.StringOutput `pulumi:"interface"`
	// Interface IPv4 address and subnet mask, syntax` - X.X.X.X X.X.X.X.
	Ip pulumi.StringOutput `pulumi:"ip"`
	// Addressing mode.
	Mode pulumi.StringOutput `pulumi:"mode"`
	// MTU value for this interface.
	Mtu pulumi.StringOutput `pulumi:"mtu"`
	// Enable to set a custom MTU for this interface.
	MtuOverride pulumi.StringOutput `pulumi:"mtuOverride"`
	// Name.
	Name pulumi.StringOutput `pulumi:"name"`
	// Interface role.
	Role pulumi.StringOutput `pulumi:"role"`
	// Interface speed. The default setting and the options available depend on the interface hardware.
	Speed pulumi.StringOutput `pulumi:"speed"`
	// Bring the interface up or shut the interface down.
	Status pulumi.StringOutput `pulumi:"status"`
	// TCP maximum segment size. 0 means do not change segment size.
	TcpMss pulumi.StringOutput `pulumi:"tcpMss"`
	// Interface type (support physical, vlan, loopback).
	Type pulumi.StringOutput `pulumi:"type"`
	// Interface is in this virtual domain (VDOM).
	Vdom pulumi.StringOutput `pulumi:"vdom"`
	// VLAN ID.
	Vlanid pulumi.StringOutput `pulumi:"vlanid"`
}

Provides a resource to configure interface settings of FortiOS.

!> **Warning:** The resource will be deprecated and replaced by new resource `system.Interface`, we recommend that you use the new resource.

## Example Usage

### Loopback Interface <!--Start PulumiCodeChooser --> ```go package main

import ( 

"github.com/pulumi/pulumi/sdk/v3/go/pulumi"
"github.com/pulumiverse/pulumi-fortios/sdk/go/fortios/networking"

) 

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		_, err := networking.NewInterfacePort(ctx, "loopback1", &networking.InterfacePortArgs{
			Alias:       pulumi.String("cc1"),
			Allowaccess: pulumi.String("ping http"),
			Description: pulumi.String("description"),
			Ip:          pulumi.String("23.123.33.10 255.255.255.0"),
			Mode:        pulumi.String("static"),
			Role:        pulumi.String("lan"),
			Status:      pulumi.String("up"),
			Type:        pulumi.String("loopback"),
			Vdom:        pulumi.String("root"),
		})
		if err != nil {
			return err
		}
		return nil
	})
}

``` <!--End PulumiCodeChooser -->

### VLAN Interface <!--Start PulumiCodeChooser --> ```go package main

import ( 

"github.com/pulumi/pulumi/sdk/v3/go/pulumi"
"github.com/pulumiverse/pulumi-fortios/sdk/go/fortios/networking"

) 

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		_, err := networking.NewInterfacePort(ctx, "vlan1", &networking.InterfacePortArgs{
			Allowaccess: pulumi.String("ping"),
			Defaultgw:   pulumi.String("enable"),
			Distance:    pulumi.String("33"),
			Interface:   pulumi.String("port2"),
			Ip:          pulumi.String("3.123.33.10 255.255.255.0"),
			Mode:        pulumi.String("static"),
			Role:        pulumi.String("lan"),
			Type:        pulumi.String("vlan"),
			Vdom:        pulumi.String("root"),
			Vlanid:      pulumi.String("3"),
		})
		if err != nil {
			return err
		}
		return nil
	})
}

``` <!--End PulumiCodeChooser -->

### Physical Interface <!--Start PulumiCodeChooser --> ```go package main

import ( 

"github.com/pulumi/pulumi/sdk/v3/go/pulumi"
"github.com/pulumiverse/pulumi-fortios/sdk/go/fortios/networking"

) 

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		_, err := networking.NewInterfacePort(ctx, "test1", &networking.InterfacePortArgs{
			Alias:                pulumi.String("dkeeew"),
			Allowaccess:          pulumi.String("ping https"),
			Defaultgw:            pulumi.String("enable"),
			Description:          pulumi.String("description"),
			DeviceIdentification: pulumi.String("enable"),
			Distance:             pulumi.String("33"),
			DnsServerOverride:    pulumi.String("enable"),
			Ip:                   pulumi.String("93.133.133.110 255.255.255.0"),
			Mode:                 pulumi.String("static"),
			Mtu:                  pulumi.String("2933"),
			MtuOverride:          pulumi.String("enable"),
			Role:                 pulumi.String("lan"),
			Speed:                pulumi.String("auto"),
			Status:               pulumi.String("up"),
			TcpMss:               pulumi.String("3232"),
			Type:                 pulumi.String("physical"),
		})
		if err != nil {
			return err
		}
		return nil
	})
}

``` <!--End PulumiCodeChooser -->

func GetInterfacePort 

func GetInterfacePort(ctx *pulumi.Context,
	name string, id pulumi.IDInput, state *InterfacePortState, opts ...pulumi.ResourceOption) (*InterfacePort, error)

GetInterfacePort gets an existing InterfacePort resource's state with the given name, ID, and optional state properties that are used to uniquely qualify the lookup (nil if not required).

func NewInterfacePort 

func NewInterfacePort(ctx *pulumi.Context,
	name string, args *InterfacePortArgs, opts ...pulumi.ResourceOption) (*InterfacePort, error)

NewInterfacePort registers a new resource with the given unique name, arguments, and options.

func (*InterfacePort) ElementType 

func (*InterfacePort) ElementType() reflect.Type

func (*InterfacePort) ToInterfacePortOutput 

func (i *InterfacePort) ToInterfacePortOutput() InterfacePortOutput

func (*InterfacePort) ToInterfacePortOutputWithContext 

func (i *InterfacePort) ToInterfacePortOutputWithContext(ctx context.Context) InterfacePortOutput

type InterfacePortArgs 

type InterfacePortArgs struct {
	// Alias will be displayed with the interface name to make it easier to distinguish.
	Alias pulumi.StringPtrInput
	// Permitted types of management access to this interface.
	Allowaccess pulumi.StringPtrInput
	// Enable to get the gateway IP from the DHCP or PPPoE server.
	Defaultgw pulumi.StringPtrInput
	// Description.
	Description pulumi.StringPtrInput
	// Enable/disable passively gathering of device identity information about the devices on the network connected to this interface.
	DeviceIdentification pulumi.StringPtrInput
	// Distance for routes learned through PPPoE or DHCP, lower distance indicates preferred route.
	Distance pulumi.StringPtrInput
	// Enable/disable use DNS acquired by DHCP or PPPoE.
	DnsServerOverride pulumi.StringPtrInput
	// Interface name.
	Interface pulumi.StringPtrInput
	// Interface IPv4 address and subnet mask, syntax` - X.X.X.X X.X.X.X.
	Ip pulumi.StringPtrInput
	// Addressing mode.
	Mode pulumi.StringPtrInput
	// MTU value for this interface.
	Mtu pulumi.StringPtrInput
	// Enable to set a custom MTU for this interface.
	MtuOverride pulumi.StringPtrInput
	// Name.
	Name pulumi.StringPtrInput
	// Interface role.
	Role pulumi.StringPtrInput
	// Interface speed. The default setting and the options available depend on the interface hardware.
	Speed pulumi.StringPtrInput
	// Bring the interface up or shut the interface down.
	Status pulumi.StringPtrInput
	// TCP maximum segment size. 0 means do not change segment size.
	TcpMss pulumi.StringPtrInput
	// Interface type (support physical, vlan, loopback).
	Type pulumi.StringInput
	// Interface is in this virtual domain (VDOM).
	Vdom pulumi.StringPtrInput
	// VLAN ID.
	Vlanid pulumi.StringPtrInput
}

The set of arguments for constructing a InterfacePort resource.

func (InterfacePortArgs) ElementType 

func (InterfacePortArgs) ElementType() reflect.Type

type InterfacePortArray 

type InterfacePortArray []InterfacePortInput

func (InterfacePortArray) ElementType 

func (InterfacePortArray) ElementType() reflect.Type

func (InterfacePortArray) ToInterfacePortArrayOutput 

func (i InterfacePortArray) ToInterfacePortArrayOutput() InterfacePortArrayOutput

func (InterfacePortArray) ToInterfacePortArrayOutputWithContext 

func (i InterfacePortArray) ToInterfacePortArrayOutputWithContext(ctx context.Context) InterfacePortArrayOutput

type InterfacePortArrayInput 

type InterfacePortArrayInput interface {
	pulumi.Input

	ToInterfacePortArrayOutput() InterfacePortArrayOutput
	ToInterfacePortArrayOutputWithContext(context.Context) InterfacePortArrayOutput
}

InterfacePortArrayInput is an input type that accepts InterfacePortArray and InterfacePortArrayOutput values. You can construct a concrete instance of `InterfacePortArrayInput` via: 

InterfacePortArray{ InterfacePortArgs{...} }

type InterfacePortArrayOutput 

type InterfacePortArrayOutput struct{ *pulumi.OutputState }

func (InterfacePortArrayOutput) ElementType 

func (InterfacePortArrayOutput) ElementType() reflect.Type

func (InterfacePortArrayOutput) Index 

func (o InterfacePortArrayOutput) Index(i pulumi.IntInput) InterfacePortOutput

func (InterfacePortArrayOutput) ToInterfacePortArrayOutput 

func (o InterfacePortArrayOutput) ToInterfacePortArrayOutput() InterfacePortArrayOutput

func (InterfacePortArrayOutput) ToInterfacePortArrayOutputWithContext 

func (o InterfacePortArrayOutput) ToInterfacePortArrayOutputWithContext(ctx context.Context) InterfacePortArrayOutput

type InterfacePortInput 

type InterfacePortInput interface {
	pulumi.Input

	ToInterfacePortOutput() InterfacePortOutput
	ToInterfacePortOutputWithContext(ctx context.Context) InterfacePortOutput
}

type InterfacePortMap 

type InterfacePortMap map[string]InterfacePortInput

func (InterfacePortMap) ElementType 

func (InterfacePortMap) ElementType() reflect.Type

func (InterfacePortMap) ToInterfacePortMapOutput 

func (i InterfacePortMap) ToInterfacePortMapOutput() InterfacePortMapOutput

func (InterfacePortMap) ToInterfacePortMapOutputWithContext 

func (i InterfacePortMap) ToInterfacePortMapOutputWithContext(ctx context.Context) InterfacePortMapOutput

type InterfacePortMapInput 

type InterfacePortMapInput interface {
	pulumi.Input

	ToInterfacePortMapOutput() InterfacePortMapOutput
	ToInterfacePortMapOutputWithContext(context.Context) InterfacePortMapOutput
}

InterfacePortMapInput is an input type that accepts InterfacePortMap and InterfacePortMapOutput values. You can construct a concrete instance of `InterfacePortMapInput` via: 

InterfacePortMap{ "key": InterfacePortArgs{...} }

type InterfacePortMapOutput 

type InterfacePortMapOutput struct{ *pulumi.OutputState }

func (InterfacePortMapOutput) ElementType 

func (InterfacePortMapOutput) ElementType() reflect.Type

func (InterfacePortMapOutput) MapIndex 

func (o InterfacePortMapOutput) MapIndex(k pulumi.StringInput) InterfacePortOutput

func (InterfacePortMapOutput) ToInterfacePortMapOutput 

func (o InterfacePortMapOutput) ToInterfacePortMapOutput() InterfacePortMapOutput

func (InterfacePortMapOutput) ToInterfacePortMapOutputWithContext 

func (o InterfacePortMapOutput) ToInterfacePortMapOutputWithContext(ctx context.Context) InterfacePortMapOutput

type InterfacePortOutput 

type InterfacePortOutput struct{ *pulumi.OutputState }

func (InterfacePortOutput) Alias 

func (o InterfacePortOutput) Alias() pulumi.StringOutput

Alias will be displayed with the interface name to make it easier to distinguish.

func (InterfacePortOutput) Allowaccess 

func (o InterfacePortOutput) Allowaccess() pulumi.StringOutput

Permitted types of management access to this interface.

func (InterfacePortOutput) Defaultgw 

func (o InterfacePortOutput) Defaultgw() pulumi.StringOutput

Enable to get the gateway IP from the DHCP or PPPoE server.

func (InterfacePortOutput) Description 

func (o InterfacePortOutput) Description() pulumi.StringPtrOutput

Description.

func (InterfacePortOutput) DeviceIdentification 

func (o InterfacePortOutput) DeviceIdentification() pulumi.StringOutput

Enable/disable passively gathering of device identity information about the devices on the network connected to this interface.

func (InterfacePortOutput) Distance 

func (o InterfacePortOutput) Distance() pulumi.StringOutput

Distance for routes learned through PPPoE or DHCP, lower distance indicates preferred route.

func (InterfacePortOutput) DnsServerOverride 

func (o InterfacePortOutput) DnsServerOverride() pulumi.StringOutput

Enable/disable use DNS acquired by DHCP or PPPoE.

func (InterfacePortOutput) ElementType 

func (InterfacePortOutput) ElementType() reflect.Type

func (InterfacePortOutput) Interface 

func (o InterfacePortOutput) Interface() pulumi.StringOutput

Interface name.

func (InterfacePortOutput) Ip 

func (o InterfacePortOutput) Ip() pulumi.StringOutput

Interface IPv4 address and subnet mask, syntax` - X.X.X.X X.X.X.X.

func (InterfacePortOutput) Mode 

func (o InterfacePortOutput) Mode() pulumi.StringOutput

Addressing mode.

func (InterfacePortOutput) Mtu 

func (o InterfacePortOutput) Mtu() pulumi.StringOutput

MTU value for this interface.

func (InterfacePortOutput) MtuOverride 

func (o InterfacePortOutput) MtuOverride() pulumi.StringOutput

Enable to set a custom MTU for this interface.

func (InterfacePortOutput) Name 

func (o InterfacePortOutput) Name() pulumi.StringOutput

Name.

func (InterfacePortOutput) Role 

func (o InterfacePortOutput) Role() pulumi.StringOutput

Interface role.

func (InterfacePortOutput) Speed 

func (o InterfacePortOutput) Speed() pulumi.StringOutput

Interface speed. The default setting and the options available depend on the interface hardware.

func (InterfacePortOutput) Status 

func (o InterfacePortOutput) Status() pulumi.StringOutput

Bring the interface up or shut the interface down.

func (InterfacePortOutput) TcpMss 

func (o InterfacePortOutput) TcpMss() pulumi.StringOutput

TCP maximum segment size. 0 means do not change segment size.

func (InterfacePortOutput) ToInterfacePortOutput 

func (o InterfacePortOutput) ToInterfacePortOutput() InterfacePortOutput

func (InterfacePortOutput) ToInterfacePortOutputWithContext 

func (o InterfacePortOutput) ToInterfacePortOutputWithContext(ctx context.Context) InterfacePortOutput

func (InterfacePortOutput) Type 

func (o InterfacePortOutput) Type() pulumi.StringOutput

Interface type (support physical, vlan, loopback).

func (InterfacePortOutput) Vdom 

func (o InterfacePortOutput) Vdom() pulumi.StringOutput

Interface is in this virtual domain (VDOM).

func (InterfacePortOutput) Vlanid 

func (o InterfacePortOutput) Vlanid() pulumi.StringOutput

VLAN ID.

type InterfacePortState 

type InterfacePortState struct {
	// Alias will be displayed with the interface name to make it easier to distinguish.
	Alias pulumi.StringPtrInput
	// Permitted types of management access to this interface.
	Allowaccess pulumi.StringPtrInput
	// Enable to get the gateway IP from the DHCP or PPPoE server.
	Defaultgw pulumi.StringPtrInput
	// Description.
	Description pulumi.StringPtrInput
	// Enable/disable passively gathering of device identity information about the devices on the network connected to this interface.
	DeviceIdentification pulumi.StringPtrInput
	// Distance for routes learned through PPPoE or DHCP, lower distance indicates preferred route.
	Distance pulumi.StringPtrInput
	// Enable/disable use DNS acquired by DHCP or PPPoE.
	DnsServerOverride pulumi.StringPtrInput
	// Interface name.
	Interface pulumi.StringPtrInput
	// Interface IPv4 address and subnet mask, syntax` - X.X.X.X X.X.X.X.
	Ip pulumi.StringPtrInput
	// Addressing mode.
	Mode pulumi.StringPtrInput
	// MTU value for this interface.
	Mtu pulumi.StringPtrInput
	// Enable to set a custom MTU for this interface.
	MtuOverride pulumi.StringPtrInput
	// Name.
	Name pulumi.StringPtrInput
	// Interface role.
	Role pulumi.StringPtrInput
	// Interface speed. The default setting and the options available depend on the interface hardware.
	Speed pulumi.StringPtrInput
	// Bring the interface up or shut the interface down.
	Status pulumi.StringPtrInput
	// TCP maximum segment size. 0 means do not change segment size.
	TcpMss pulumi.StringPtrInput
	// Interface type (support physical, vlan, loopback).
	Type pulumi.StringPtrInput
	// Interface is in this virtual domain (VDOM).
	Vdom pulumi.StringPtrInput
	// VLAN ID.
	Vlanid pulumi.StringPtrInput
}

func (InterfacePortState) ElementType 

func (InterfacePortState) ElementType() reflect.Type

type RouteStatic 

type RouteStatic struct {
	pulumi.CustomResourceState

	// Enable/disable black hole.
	Blackhole pulumi.StringOutput `pulumi:"blackhole"`
	// Optional comments.
	Comment pulumi.StringPtrOutput `pulumi:"comment"`
	// Gateway out interface or tunnel.
	Device pulumi.StringOutput `pulumi:"device"`
	// Administrative distance.
	Distance pulumi.StringOutput `pulumi:"distance"`
	// Destination IP and mask for this route.
	Dst pulumi.StringOutput `pulumi:"dst"`
	// Gateway IP for this route.
	Gateway pulumi.StringOutput `pulumi:"gateway"`
	// Application ID in the Internet service database.
	InternetService pulumi.IntOutput `pulumi:"internetService"`
	// Administrative priority.
	Priority pulumi.StringOutput `pulumi:"priority"`
	// Enable/disable this static route. default is "enable".
	Status pulumi.StringOutput `pulumi:"status"`
	// Administrative weight.
	Weight pulumi.StringOutput `pulumi:"weight"`
}

Provides a resource to configure static route of FortiOS.

!> **Warning:** The resource will be deprecated and replaced by new resource `router.Static`, we recommend that you use the new resource.

## Example Usage

<!--Start PulumiCodeChooser --> ```go package main

import ( 

"github.com/pulumi/pulumi/sdk/v3/go/pulumi"
"github.com/pulumiverse/pulumi-fortios/sdk/go/fortios/networking"

) 

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		_, err := networking.NewRouteStatic(ctx, "subnet", &networking.RouteStaticArgs{
			Blackhole: pulumi.String("disable"),
			Comment:   pulumi.String("Terraform test"),
			Device:    pulumi.String("port2"),
			Distance:  pulumi.String("22"),
			Dst:       pulumi.String("110.2.2.122/32"),
			Gateway:   pulumi.String("2.2.2.2"),
			Priority:  pulumi.String("3"),
			Status:    pulumi.String("enable"),
			Weight:    pulumi.String("3"),
		})
		if err != nil {
			return err
		}
		_, err = networking.NewRouteStatic(ctx, "internetService", &networking.RouteStaticArgs{
			Blackhole:       pulumi.String("disable"),
			Comment:         pulumi.String("Terraform Test"),
			Device:          pulumi.String("port2"),
			Distance:        pulumi.String("22"),
			Gateway:         pulumi.String("2.2.2.2"),
			InternetService: pulumi.Int(5242881),
			Priority:        pulumi.String("3"),
			Status:          pulumi.String("enable"),
			Weight:          pulumi.String("3"),
		})
		if err != nil {
			return err
		}
		return nil
	})
}

``` <!--End PulumiCodeChooser -->

func GetRouteStatic 

func GetRouteStatic(ctx *pulumi.Context,
	name string, id pulumi.IDInput, state *RouteStaticState, opts ...pulumi.ResourceOption) (*RouteStatic, error)

GetRouteStatic gets an existing RouteStatic resource's state with the given name, ID, and optional state properties that are used to uniquely qualify the lookup (nil if not required).

func NewRouteStatic 

func NewRouteStatic(ctx *pulumi.Context,
	name string, args *RouteStaticArgs, opts ...pulumi.ResourceOption) (*RouteStatic, error)

NewRouteStatic registers a new resource with the given unique name, arguments, and options.

func (*RouteStatic) ElementType 

func (*RouteStatic) ElementType() reflect.Type

func (*RouteStatic) ToRouteStaticOutput 

func (i *RouteStatic) ToRouteStaticOutput() RouteStaticOutput

func (*RouteStatic) ToRouteStaticOutputWithContext 

func (i *RouteStatic) ToRouteStaticOutputWithContext(ctx context.Context) RouteStaticOutput

type RouteStaticArgs 

type RouteStaticArgs struct {
	// Enable/disable black hole.
	Blackhole pulumi.StringPtrInput
	// Optional comments.
	Comment pulumi.StringPtrInput
	// Gateway out interface or tunnel.
	Device pulumi.StringInput
	// Administrative distance.
	Distance pulumi.StringPtrInput
	// Destination IP and mask for this route.
	Dst pulumi.StringPtrInput
	// Gateway IP for this route.
	Gateway pulumi.StringInput
	// Application ID in the Internet service database.
	InternetService pulumi.IntPtrInput
	// Administrative priority.
	Priority pulumi.StringPtrInput
	// Enable/disable this static route. default is "enable".
	Status pulumi.StringPtrInput
	// Administrative weight.
	Weight pulumi.StringPtrInput
}

The set of arguments for constructing a RouteStatic resource.

func (RouteStaticArgs) ElementType 

func (RouteStaticArgs) ElementType() reflect.Type

type RouteStaticArray 

type RouteStaticArray []RouteStaticInput

func (RouteStaticArray) ElementType 

func (RouteStaticArray) ElementType() reflect.Type

func (RouteStaticArray) ToRouteStaticArrayOutput 

func (i RouteStaticArray) ToRouteStaticArrayOutput() RouteStaticArrayOutput

func (RouteStaticArray) ToRouteStaticArrayOutputWithContext 

func (i RouteStaticArray) ToRouteStaticArrayOutputWithContext(ctx context.Context) RouteStaticArrayOutput

type RouteStaticArrayInput 

type RouteStaticArrayInput interface {
	pulumi.Input

	ToRouteStaticArrayOutput() RouteStaticArrayOutput
	ToRouteStaticArrayOutputWithContext(context.Context) RouteStaticArrayOutput
}

RouteStaticArrayInput is an input type that accepts RouteStaticArray and RouteStaticArrayOutput values. You can construct a concrete instance of `RouteStaticArrayInput` via: 

RouteStaticArray{ RouteStaticArgs{...} }

type RouteStaticArrayOutput 

type RouteStaticArrayOutput struct{ *pulumi.OutputState }

func (RouteStaticArrayOutput) ElementType 

func (RouteStaticArrayOutput) ElementType() reflect.Type

func (RouteStaticArrayOutput) Index 

func (o RouteStaticArrayOutput) Index(i pulumi.IntInput) RouteStaticOutput

func (RouteStaticArrayOutput) ToRouteStaticArrayOutput 

func (o RouteStaticArrayOutput) ToRouteStaticArrayOutput() RouteStaticArrayOutput

func (RouteStaticArrayOutput) ToRouteStaticArrayOutputWithContext 

func (o RouteStaticArrayOutput) ToRouteStaticArrayOutputWithContext(ctx context.Context) RouteStaticArrayOutput

type RouteStaticInput 

type RouteStaticInput interface {
	pulumi.Input

	ToRouteStaticOutput() RouteStaticOutput
	ToRouteStaticOutputWithContext(ctx context.Context) RouteStaticOutput
}

type RouteStaticMap 

type RouteStaticMap map[string]RouteStaticInput

func (RouteStaticMap) ElementType 

func (RouteStaticMap) ElementType() reflect.Type

func (RouteStaticMap) ToRouteStaticMapOutput 

func (i RouteStaticMap) ToRouteStaticMapOutput() RouteStaticMapOutput

func (RouteStaticMap) ToRouteStaticMapOutputWithContext 

func (i RouteStaticMap) ToRouteStaticMapOutputWithContext(ctx context.Context) RouteStaticMapOutput

type RouteStaticMapInput 

type RouteStaticMapInput interface {
	pulumi.Input

	ToRouteStaticMapOutput() RouteStaticMapOutput
	ToRouteStaticMapOutputWithContext(context.Context) RouteStaticMapOutput
}

RouteStaticMapInput is an input type that accepts RouteStaticMap and RouteStaticMapOutput values. You can construct a concrete instance of `RouteStaticMapInput` via: 

RouteStaticMap{ "key": RouteStaticArgs{...} }

type RouteStaticMapOutput 

type RouteStaticMapOutput struct{ *pulumi.OutputState }

func (RouteStaticMapOutput) ElementType 

func (RouteStaticMapOutput) ElementType() reflect.Type

func (RouteStaticMapOutput) MapIndex 

func (o RouteStaticMapOutput) MapIndex(k pulumi.StringInput) RouteStaticOutput

func (RouteStaticMapOutput) ToRouteStaticMapOutput 

func (o RouteStaticMapOutput) ToRouteStaticMapOutput() RouteStaticMapOutput

func (RouteStaticMapOutput) ToRouteStaticMapOutputWithContext 

func (o RouteStaticMapOutput) ToRouteStaticMapOutputWithContext(ctx context.Context) RouteStaticMapOutput

type RouteStaticOutput 

type RouteStaticOutput struct{ *pulumi.OutputState }

func (RouteStaticOutput) Blackhole 

func (o RouteStaticOutput) Blackhole() pulumi.StringOutput

Enable/disable black hole.

func (RouteStaticOutput) Comment 

func (o RouteStaticOutput) Comment() pulumi.StringPtrOutput

Optional comments.

func (RouteStaticOutput) Device 

func (o RouteStaticOutput) Device() pulumi.StringOutput

Gateway out interface or tunnel.

func (RouteStaticOutput) Distance 

func (o RouteStaticOutput) Distance() pulumi.StringOutput

Administrative distance.

func (RouteStaticOutput) Dst 

func (o RouteStaticOutput) Dst() pulumi.StringOutput

Destination IP and mask for this route.

func (RouteStaticOutput) ElementType 

func (RouteStaticOutput) ElementType() reflect.Type

func (RouteStaticOutput) Gateway 

func (o RouteStaticOutput) Gateway() pulumi.StringOutput

Gateway IP for this route.

func (RouteStaticOutput) InternetService 

func (o RouteStaticOutput) InternetService() pulumi.IntOutput

Application ID in the Internet service database.

func (RouteStaticOutput) Priority 

func (o RouteStaticOutput) Priority() pulumi.StringOutput

Administrative priority.

func (RouteStaticOutput) Status 

func (o RouteStaticOutput) Status() pulumi.StringOutput

Enable/disable this static route. default is "enable".

func (RouteStaticOutput) ToRouteStaticOutput 

func (o RouteStaticOutput) ToRouteStaticOutput() RouteStaticOutput

func (RouteStaticOutput) ToRouteStaticOutputWithContext 

func (o RouteStaticOutput) ToRouteStaticOutputWithContext(ctx context.Context) RouteStaticOutput

func (RouteStaticOutput) Weight 

func (o RouteStaticOutput) Weight() pulumi.StringOutput

Administrative weight.

type RouteStaticState 

type RouteStaticState struct {
	// Enable/disable black hole.
	Blackhole pulumi.StringPtrInput
	// Optional comments.
	Comment pulumi.StringPtrInput
	// Gateway out interface or tunnel.
	Device pulumi.StringPtrInput
	// Administrative distance.
	Distance pulumi.StringPtrInput
	// Destination IP and mask for this route.
	Dst pulumi.StringPtrInput
	// Gateway IP for this route.
	Gateway pulumi.StringPtrInput
	// Application ID in the Internet service database.
	InternetService pulumi.IntPtrInput
	// Administrative priority.
	Priority pulumi.StringPtrInput
	// Enable/disable this static route. default is "enable".
	Status pulumi.StringPtrInput
	// Administrative weight.
	Weight pulumi.StringPtrInput
}

func (RouteStaticState) ElementType 

func (RouteStaticState) ElementType() reflect.Type

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.