extendercontroller

package
v0.0.6 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Jul 9, 2024 License: Apache-2.0 Imports: 7 Imported by: 0

Documentation

Index

Constants

This section is empty.

Variables

This section is empty.

Functions

This section is empty.

Types

type Dataplan 

type Dataplan struct {
	pulumi.CustomResourceState

	// APN configuration.
	Apn pulumi.StringOutput `pulumi:"apn"`
	// Authentication type. Valid values: `none`, `pap`, `chap`.
	AuthType pulumi.StringOutput `pulumi:"authType"`
	// Billing day of the month (1 - 31).
	BillingDate pulumi.IntOutput `pulumi:"billingDate"`
	// Capacity in MB (0 - 102400000).
	Capacity pulumi.IntOutput `pulumi:"capacity"`
	// Carrier configuration.
	Carrier pulumi.StringOutput `pulumi:"carrier"`
	// ICCID configuration.
	Iccid pulumi.StringOutput `pulumi:"iccid"`
	// Dataplan's modem specifics, if any. Valid values: `modem1`, `modem2`, `all`.
	ModemId pulumi.StringOutput `pulumi:"modemId"`
	// Monthly fee of dataplan (0 - 100000, in local currency).
	MonthlyFee pulumi.IntOutput `pulumi:"monthlyFee"`
	// FortiExtender dataplan name
	Name pulumi.StringOutput `pulumi:"name"`
	// Enable/disable dataplan overage detection. Valid values: `disable`, `enable`.
	Overage pulumi.StringOutput `pulumi:"overage"`
	// Password.
	Password pulumi.StringPtrOutput `pulumi:"password"`
	// PDN type. Valid values: `ipv4-only`, `ipv6-only`, `ipv4-ipv6`.
	Pdn pulumi.StringOutput `pulumi:"pdn"`
	// Preferred subnet mask. On FortiOS versions 6.4.2-7.0.1: 8 - 32. On FortiOS versions 7.0.2-7.2.0: 0 - 32.
	PreferredSubnet pulumi.IntOutput `pulumi:"preferredSubnet"`
	// Enable/disable dataplan private network support. Valid values: `disable`, `enable`.
	PrivateNetwork pulumi.StringOutput `pulumi:"privateNetwork"`
	// Signal period (600 to 18000 seconds).
	SignalPeriod pulumi.IntOutput `pulumi:"signalPeriod"`
	// Signal threshold. Specify the range between 50 - 100, where 50/100 means -50/-100 dBm.
	SignalThreshold pulumi.IntOutput `pulumi:"signalThreshold"`
	// SIM slot configuration. Valid values: `sim1`, `sim2`.
	Slot pulumi.StringOutput `pulumi:"slot"`
	// Type preferences configuration. Valid values: `carrier`, `slot`, `iccid`, `generic`.
	Type pulumi.StringOutput `pulumi:"type"`
	// Username.
	Username pulumi.StringOutput `pulumi:"username"`
	// Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
	Vdomparam pulumi.StringOutput `pulumi:"vdomparam"`
}

FortiExtender dataplan configuration. Applies to FortiOS Version `6.4.2,6.4.10,6.4.11,6.4.12,6.4.13,6.4.14,6.4.15,7.0.0,7.0.1,7.0.2,7.0.3,7.0.4,7.0.5,7.0.6,7.0.7,7.0.8,7.0.9,7.0.10,7.0.11,7.0.12,7.0.13,7.0.14,7.0.15,7.2.0`.

## Import

ExtenderController Dataplan can be imported using any of these accepted formats:

```sh $ pulumi import fortios:extendercontroller/dataplan:Dataplan labelname {{name}} ```

If you do not want to import arguments of block:

$ export "FORTIOS_IMPORT_TABLE"="false"

```sh $ pulumi import fortios:extendercontroller/dataplan:Dataplan labelname {{name}} ```

$ unset "FORTIOS_IMPORT_TABLE"

func GetDataplan 

func GetDataplan(ctx *pulumi.Context,
	name string, id pulumi.IDInput, state *DataplanState, opts ...pulumi.ResourceOption) (*Dataplan, error)

GetDataplan gets an existing Dataplan resource's state with the given name, ID, and optional state properties that are used to uniquely qualify the lookup (nil if not required).

func NewDataplan 

func NewDataplan(ctx *pulumi.Context,
	name string, args *DataplanArgs, opts ...pulumi.ResourceOption) (*Dataplan, error)

NewDataplan registers a new resource with the given unique name, arguments, and options.

func (*Dataplan) ElementType 

func (*Dataplan) ElementType() reflect.Type

func (*Dataplan) ToDataplanOutput 

func (i *Dataplan) ToDataplanOutput() DataplanOutput

func (*Dataplan) ToDataplanOutputWithContext 

func (i *Dataplan) ToDataplanOutputWithContext(ctx context.Context) DataplanOutput

type DataplanArgs 

type DataplanArgs struct {
	// APN configuration.
	Apn pulumi.StringPtrInput
	// Authentication type. Valid values: `none`, `pap`, `chap`.
	AuthType pulumi.StringPtrInput
	// Billing day of the month (1 - 31).
	BillingDate pulumi.IntPtrInput
	// Capacity in MB (0 - 102400000).
	Capacity pulumi.IntPtrInput
	// Carrier configuration.
	Carrier pulumi.StringPtrInput
	// ICCID configuration.
	Iccid pulumi.StringPtrInput
	// Dataplan's modem specifics, if any. Valid values: `modem1`, `modem2`, `all`.
	ModemId pulumi.StringPtrInput
	// Monthly fee of dataplan (0 - 100000, in local currency).
	MonthlyFee pulumi.IntPtrInput
	// FortiExtender dataplan name
	Name pulumi.StringPtrInput
	// Enable/disable dataplan overage detection. Valid values: `disable`, `enable`.
	Overage pulumi.StringPtrInput
	// Password.
	Password pulumi.StringPtrInput
	// PDN type. Valid values: `ipv4-only`, `ipv6-only`, `ipv4-ipv6`.
	Pdn pulumi.StringPtrInput
	// Preferred subnet mask. On FortiOS versions 6.4.2-7.0.1: 8 - 32. On FortiOS versions 7.0.2-7.2.0: 0 - 32.
	PreferredSubnet pulumi.IntPtrInput
	// Enable/disable dataplan private network support. Valid values: `disable`, `enable`.
	PrivateNetwork pulumi.StringPtrInput
	// Signal period (600 to 18000 seconds).
	SignalPeriod pulumi.IntPtrInput
	// Signal threshold. Specify the range between 50 - 100, where 50/100 means -50/-100 dBm.
	SignalThreshold pulumi.IntPtrInput
	// SIM slot configuration. Valid values: `sim1`, `sim2`.
	Slot pulumi.StringPtrInput
	// Type preferences configuration. Valid values: `carrier`, `slot`, `iccid`, `generic`.
	Type pulumi.StringPtrInput
	// Username.
	Username pulumi.StringPtrInput
	// Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
	Vdomparam pulumi.StringPtrInput
}

The set of arguments for constructing a Dataplan resource.

func (DataplanArgs) ElementType 

func (DataplanArgs) ElementType() reflect.Type

type DataplanArray 

type DataplanArray []DataplanInput

func (DataplanArray) ElementType 

func (DataplanArray) ElementType() reflect.Type

func (DataplanArray) ToDataplanArrayOutput 

func (i DataplanArray) ToDataplanArrayOutput() DataplanArrayOutput

func (DataplanArray) ToDataplanArrayOutputWithContext 

func (i DataplanArray) ToDataplanArrayOutputWithContext(ctx context.Context) DataplanArrayOutput

type DataplanArrayInput 

type DataplanArrayInput interface {
	pulumi.Input

	ToDataplanArrayOutput() DataplanArrayOutput
	ToDataplanArrayOutputWithContext(context.Context) DataplanArrayOutput
}

DataplanArrayInput is an input type that accepts DataplanArray and DataplanArrayOutput values. You can construct a concrete instance of `DataplanArrayInput` via: 

DataplanArray{ DataplanArgs{...} }

type DataplanArrayOutput 

type DataplanArrayOutput struct{ *pulumi.OutputState }

func (DataplanArrayOutput) ElementType 

func (DataplanArrayOutput) ElementType() reflect.Type

func (DataplanArrayOutput) Index 

func (o DataplanArrayOutput) Index(i pulumi.IntInput) DataplanOutput

func (DataplanArrayOutput) ToDataplanArrayOutput 

func (o DataplanArrayOutput) ToDataplanArrayOutput() DataplanArrayOutput

func (DataplanArrayOutput) ToDataplanArrayOutputWithContext 

func (o DataplanArrayOutput) ToDataplanArrayOutputWithContext(ctx context.Context) DataplanArrayOutput

type DataplanInput 

type DataplanInput interface {
	pulumi.Input

	ToDataplanOutput() DataplanOutput
	ToDataplanOutputWithContext(ctx context.Context) DataplanOutput
}

type DataplanMap 

type DataplanMap map[string]DataplanInput

func (DataplanMap) ElementType 

func (DataplanMap) ElementType() reflect.Type

func (DataplanMap) ToDataplanMapOutput 

func (i DataplanMap) ToDataplanMapOutput() DataplanMapOutput

func (DataplanMap) ToDataplanMapOutputWithContext 

func (i DataplanMap) ToDataplanMapOutputWithContext(ctx context.Context) DataplanMapOutput

type DataplanMapInput 

type DataplanMapInput interface {
	pulumi.Input

	ToDataplanMapOutput() DataplanMapOutput
	ToDataplanMapOutputWithContext(context.Context) DataplanMapOutput
}

DataplanMapInput is an input type that accepts DataplanMap and DataplanMapOutput values. You can construct a concrete instance of `DataplanMapInput` via: 

DataplanMap{ "key": DataplanArgs{...} }

type DataplanMapOutput 

type DataplanMapOutput struct{ *pulumi.OutputState }

func (DataplanMapOutput) ElementType 

func (DataplanMapOutput) ElementType() reflect.Type

func (DataplanMapOutput) MapIndex 

func (o DataplanMapOutput) MapIndex(k pulumi.StringInput) DataplanOutput

func (DataplanMapOutput) ToDataplanMapOutput 

func (o DataplanMapOutput) ToDataplanMapOutput() DataplanMapOutput

func (DataplanMapOutput) ToDataplanMapOutputWithContext 

func (o DataplanMapOutput) ToDataplanMapOutputWithContext(ctx context.Context) DataplanMapOutput

type DataplanOutput 

type DataplanOutput struct{ *pulumi.OutputState }

func (DataplanOutput) Apn 

func (o DataplanOutput) Apn() pulumi.StringOutput

APN configuration.

func (DataplanOutput) AuthType 

func (o DataplanOutput) AuthType() pulumi.StringOutput

Authentication type. Valid values: `none`, `pap`, `chap`.

func (DataplanOutput) BillingDate 

func (o DataplanOutput) BillingDate() pulumi.IntOutput

Billing day of the month (1 - 31).

func (DataplanOutput) Capacity 

func (o DataplanOutput) Capacity() pulumi.IntOutput

Capacity in MB (0 - 102400000).

func (DataplanOutput) Carrier 

func (o DataplanOutput) Carrier() pulumi.StringOutput

Carrier configuration.

func (DataplanOutput) ElementType 

func (DataplanOutput) ElementType() reflect.Type

func (DataplanOutput) Iccid 

func (o DataplanOutput) Iccid() pulumi.StringOutput

ICCID configuration.

func (DataplanOutput) ModemId 

func (o DataplanOutput) ModemId() pulumi.StringOutput

Dataplan's modem specifics, if any. Valid values: `modem1`, `modem2`, `all`.

func (DataplanOutput) MonthlyFee 

func (o DataplanOutput) MonthlyFee() pulumi.IntOutput

Monthly fee of dataplan (0 - 100000, in local currency).

func (DataplanOutput) Name 

func (o DataplanOutput) Name() pulumi.StringOutput

FortiExtender dataplan name

func (DataplanOutput) Overage 

func (o DataplanOutput) Overage() pulumi.StringOutput

Enable/disable dataplan overage detection. Valid values: `disable`, `enable`.

func (DataplanOutput) Password 

func (o DataplanOutput) Password() pulumi.StringPtrOutput

Password.

func (DataplanOutput) Pdn 

func (o DataplanOutput) Pdn() pulumi.StringOutput

PDN type. Valid values: `ipv4-only`, `ipv6-only`, `ipv4-ipv6`.

func (DataplanOutput) PreferredSubnet 

func (o DataplanOutput) PreferredSubnet() pulumi.IntOutput

Preferred subnet mask. On FortiOS versions 6.4.2-7.0.1: 8 - 32. On FortiOS versions 7.0.2-7.2.0: 0 - 32.

func (DataplanOutput) PrivateNetwork 

func (o DataplanOutput) PrivateNetwork() pulumi.StringOutput

Enable/disable dataplan private network support. Valid values: `disable`, `enable`.

func (DataplanOutput) SignalPeriod 

func (o DataplanOutput) SignalPeriod() pulumi.IntOutput

Signal period (600 to 18000 seconds).

func (DataplanOutput) SignalThreshold 

func (o DataplanOutput) SignalThreshold() pulumi.IntOutput

Signal threshold. Specify the range between 50 - 100, where 50/100 means -50/-100 dBm.

func (DataplanOutput) Slot 

func (o DataplanOutput) Slot() pulumi.StringOutput

SIM slot configuration. Valid values: `sim1`, `sim2`.

func (DataplanOutput) ToDataplanOutput 

func (o DataplanOutput) ToDataplanOutput() DataplanOutput

func (DataplanOutput) ToDataplanOutputWithContext 

func (o DataplanOutput) ToDataplanOutputWithContext(ctx context.Context) DataplanOutput

func (DataplanOutput) Type 

func (o DataplanOutput) Type() pulumi.StringOutput

Type preferences configuration. Valid values: `carrier`, `slot`, `iccid`, `generic`.

func (DataplanOutput) Username 

func (o DataplanOutput) Username() pulumi.StringOutput

Username.

func (DataplanOutput) Vdomparam 

func (o DataplanOutput) Vdomparam() pulumi.StringOutput

Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.

type DataplanState 

type DataplanState struct {
	// APN configuration.
	Apn pulumi.StringPtrInput
	// Authentication type. Valid values: `none`, `pap`, `chap`.
	AuthType pulumi.StringPtrInput
	// Billing day of the month (1 - 31).
	BillingDate pulumi.IntPtrInput
	// Capacity in MB (0 - 102400000).
	Capacity pulumi.IntPtrInput
	// Carrier configuration.
	Carrier pulumi.StringPtrInput
	// ICCID configuration.
	Iccid pulumi.StringPtrInput
	// Dataplan's modem specifics, if any. Valid values: `modem1`, `modem2`, `all`.
	ModemId pulumi.StringPtrInput
	// Monthly fee of dataplan (0 - 100000, in local currency).
	MonthlyFee pulumi.IntPtrInput
	// FortiExtender dataplan name
	Name pulumi.StringPtrInput
	// Enable/disable dataplan overage detection. Valid values: `disable`, `enable`.
	Overage pulumi.StringPtrInput
	// Password.
	Password pulumi.StringPtrInput
	// PDN type. Valid values: `ipv4-only`, `ipv6-only`, `ipv4-ipv6`.
	Pdn pulumi.StringPtrInput
	// Preferred subnet mask. On FortiOS versions 6.4.2-7.0.1: 8 - 32. On FortiOS versions 7.0.2-7.2.0: 0 - 32.
	PreferredSubnet pulumi.IntPtrInput
	// Enable/disable dataplan private network support. Valid values: `disable`, `enable`.
	PrivateNetwork pulumi.StringPtrInput
	// Signal period (600 to 18000 seconds).
	SignalPeriod pulumi.IntPtrInput
	// Signal threshold. Specify the range between 50 - 100, where 50/100 means -50/-100 dBm.
	SignalThreshold pulumi.IntPtrInput
	// SIM slot configuration. Valid values: `sim1`, `sim2`.
	Slot pulumi.StringPtrInput
	// Type preferences configuration. Valid values: `carrier`, `slot`, `iccid`, `generic`.
	Type pulumi.StringPtrInput
	// Username.
	Username pulumi.StringPtrInput
	// Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
	Vdomparam pulumi.StringPtrInput
}

func (DataplanState) ElementType 

func (DataplanState) ElementType() reflect.Type

type Extender 

type Extender struct {
	pulumi.CustomResourceState

	// AAA shared secret.
	AaaSharedSecret pulumi.StringPtrOutput `pulumi:"aaaSharedSecret"`
	// Access point name(APN).
	AccessPointName pulumi.StringOutput `pulumi:"accessPointName"`
	// FortiExtender Administration (enable or disable). Valid values: `disable`, `discovered`, `enable`.
	Admin pulumi.StringOutput `pulumi:"admin"`
	// Control management access to the managed extender. Separate entries with a space. Valid values: `ping`, `telnet`, `http`, `https`, `ssh`, `snmp`.
	Allowaccess pulumi.StringOutput `pulumi:"allowaccess"`
	// Initialization AT commands specific to the MODEM.
	AtDialScript pulumi.StringOutput `pulumi:"atDialScript"`
	// FortiExtender Administration (enable or disable). Valid values: `disable`, `enable`.
	Authorized pulumi.StringOutput `pulumi:"authorized"`
	// FortiExtender LAN extension bandwidth limit (Mbps).
	BandwidthLimit pulumi.IntOutput `pulumi:"bandwidthLimit"`
	// Billing start day.
	BillingStartDay pulumi.IntOutput `pulumi:"billingStartDay"`
	// CDMA AAA SPI.
	CdmaAaaSpi pulumi.StringOutput `pulumi:"cdmaAaaSpi"`
	// CDMA HA SPI.
	CdmaHaSpi pulumi.StringOutput `pulumi:"cdmaHaSpi"`
	// NAI for CDMA MODEMS.
	CdmaNai pulumi.StringOutput `pulumi:"cdmaNai"`
	// Connection status.
	ConnStatus pulumi.IntOutput `pulumi:"connStatus"`
	// FortiExtender controller report configuration. The structure of `controllerReport` block is documented below.
	ControllerReport ExtenderControllerReportOutput `pulumi:"controllerReport"`
	// Description.
	Description pulumi.StringOutput `pulumi:"description"`
	// device-id
	DeviceId pulumi.IntOutput `pulumi:"deviceId"`
	// Dial mode (dial-on-demand or always-connect). Valid values: `dial-on-demand`, `always-connect`.
	DialMode pulumi.StringOutput `pulumi:"dialMode"`
	// Dial status.
	DialStatus pulumi.IntOutput `pulumi:"dialStatus"`
	// Enable/disable enforcement of bandwidth on LAN extension interface. Valid values: `enable`, `disable`.
	EnforceBandwidth pulumi.StringOutput `pulumi:"enforceBandwidth"`
	// FortiExtender name.
	ExtName pulumi.StringOutput `pulumi:"extName"`
	// Extension type for this FortiExtender. Valid values: `wan-extension`, `lan-extension`.
	ExtensionType pulumi.StringOutput `pulumi:"extensionType"`
	// FortiExtender serial number.
	Fosid pulumi.StringOutput `pulumi:"fosid"`
	// Get all sub-tables including unconfigured tables. Do not set this variable to true if you configure sub-table in another resource, otherwise, conflicts and overwrite will occur. Options: [ false, true ]. false: Default value, do not get unconfigured tables; true: get all tables including unconfigured tables.
	GetAllTables pulumi.StringPtrOutput `pulumi:"getAllTables"`
	// HA shared secret.
	HaSharedSecret pulumi.StringPtrOutput `pulumi:"haSharedSecret"`
	// FortiExtender interface name.
	Ifname pulumi.StringOutput `pulumi:"ifname"`
	// Allow/disallow network initiated updates to the MODEM. Valid values: `enable`, `disable`.
	InitiatedUpdate pulumi.StringOutput `pulumi:"initiatedUpdate"`
	// FortiExtender login password.
	LoginPassword pulumi.StringPtrOutput `pulumi:"loginPassword"`
	// Change or reset the administrator password of a managed extender (yes, default, or no, default = no). Valid values: `yes`, `default`, `no`.
	LoginPasswordChange pulumi.StringOutput `pulumi:"loginPasswordChange"`
	// FortiExtender mode. Valid values: `standalone`, `redundant`.
	Mode pulumi.StringOutput `pulumi:"mode"`
	// Configuration options for modem 1. The structure of `modem1` block is documented below.
	Modem1 ExtenderModem1Output `pulumi:"modem1"`
	// Configuration options for modem 2. The structure of `modem2` block is documented below.
	Modem2 ExtenderModem2Output `pulumi:"modem2"`
	// MODEM password.
	ModemPasswd pulumi.StringPtrOutput `pulumi:"modemPasswd"`
	// MODEM type (CDMA, GSM/LTE or WIMAX). Valid values: `cdma`, `gsm/lte`, `wimax`.
	ModemType pulumi.StringOutput `pulumi:"modemType"`
	// MODEM mode of operation(3G,LTE,etc). Valid values: `auto`, `auto-3g`, `force-lte`, `force-3g`, `force-2g`.
	MultiMode pulumi.StringOutput `pulumi:"multiMode"`
	// FortiExtender entry name.
	Name pulumi.StringOutput `pulumi:"name"`
	// Enable to override the extender profile management access configuration. Valid values: `enable`, `disable`.
	OverrideAllowaccess pulumi.StringOutput `pulumi:"overrideAllowaccess"`
	// Enable to override the extender profile enforce-bandwidth setting. Valid values: `enable`, `disable`.
	OverrideEnforceBandwidth pulumi.StringOutput `pulumi:"overrideEnforceBandwidth"`
	// Enable to override the extender profile login-password (administrator password) setting. Valid values: `enable`, `disable`.
	OverrideLoginPasswordChange pulumi.StringOutput `pulumi:"overrideLoginPasswordChange"`
	// PPP authentication protocol (PAP,CHAP or auto). Valid values: `auto`, `pap`, `chap`.
	PppAuthProtocol pulumi.StringOutput `pulumi:"pppAuthProtocol"`
	// Enable/disable PPP echo request. Valid values: `enable`, `disable`.
	PppEchoRequest pulumi.StringOutput `pulumi:"pppEchoRequest"`
	// PPP password.
	PppPassword pulumi.StringPtrOutput `pulumi:"pppPassword"`
	// PPP username.
	PppUsername pulumi.StringOutput `pulumi:"pppUsername"`
	// Primary HA.
	PrimaryHa pulumi.StringOutput `pulumi:"primaryHa"`
	// FortiExtender profile configuration.
	Profile pulumi.StringOutput `pulumi:"profile"`
	// Monthly quota limit (MB).
	QuotaLimitMb pulumi.IntOutput `pulumi:"quotaLimitMb"`
	// Number of redials allowed based on failed attempts. Valid values: `none`, `1`, `2`, `3`, `4`, `5`, `6`, `7`, `8`, `9`, `10`.
	Redial pulumi.StringOutput `pulumi:"redial"`
	// Redundant interface.
	RedundantIntf pulumi.StringOutput `pulumi:"redundantIntf"`
	// Enable/disable MODEM roaming. Valid values: `enable`, `disable`.
	Roaming pulumi.StringOutput `pulumi:"roaming"`
	// FortiExtender work role(Primary, Secondary, None). Valid values: `none`, `primary`, `secondary`.
	Role pulumi.StringOutput `pulumi:"role"`
	// Secondary HA.
	SecondaryHa pulumi.StringOutput `pulumi:"secondaryHa"`
	// SIM PIN.
	SimPin pulumi.StringPtrOutput `pulumi:"simPin"`
	// VDOM
	Vdom pulumi.IntOutput `pulumi:"vdom"`
	// Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
	Vdomparam pulumi.StringOutput `pulumi:"vdomparam"`
	// FortiExtender wan extension configuration. The structure of `wanExtension` block is documented below.
	WanExtension ExtenderWanExtensionOutput `pulumi:"wanExtension"`
	// WiMax authentication protocol(TLS or TTLS). Valid values: `tls`, `ttls`.
	WimaxAuthProtocol pulumi.StringOutput `pulumi:"wimaxAuthProtocol"`
	// WiMax carrier.
	WimaxCarrier pulumi.StringOutput `pulumi:"wimaxCarrier"`
	// WiMax realm.
	WimaxRealm pulumi.StringOutput `pulumi:"wimaxRealm"`
}

Extender controller configuration. The resource applies to FortiOS Version < 7.2.1. For FortiOS version >= 7.2.1, see `extensioncontroller.Extender`

## Example Usage

```go package main

import ( 

"github.com/pulumi/pulumi/sdk/v3/go/pulumi"
"github.com/pulumiverse/pulumi-fortios/sdk/go/fortios/extendercontroller"

) 

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		_, err := extendercontroller.NewExtender(ctx, "trname", &extendercontroller.ExtenderArgs{
			Admin:             pulumi.String("disable"),
			BillingStartDay:   pulumi.Int(1),
			ConnStatus:        pulumi.Int(0),
			DialMode:          pulumi.String("always-connect"),
			DialStatus:        pulumi.Int(0),
			ExtName:           pulumi.String("332"),
			Fosid:             pulumi.String("1"),
			InitiatedUpdate:   pulumi.String("disable"),
			Mode:              pulumi.String("standalone"),
			ModemType:         pulumi.String("gsm/lte"),
			MultiMode:         pulumi.String("auto"),
			PppAuthProtocol:   pulumi.String("auto"),
			PppEchoRequest:    pulumi.String("disable"),
			QuotaLimitMb:      pulumi.Int(0),
			Redial:            pulumi.String("none"),
			Roaming:           pulumi.String("disable"),
			Role:              pulumi.String("primary"),
			Vdom:              pulumi.Int(0),
			WimaxAuthProtocol: pulumi.String("tls"),
		})
		if err != nil {
			return err
		}
		return nil
	})
}

```

## Import

ExtenderController Extender can be imported using any of these accepted formats:

```sh $ pulumi import fortios:extendercontroller/extender:Extender labelname {{fosid}} ```

If you do not want to import arguments of block:

$ export "FORTIOS_IMPORT_TABLE"="false"

```sh $ pulumi import fortios:extendercontroller/extender:Extender labelname {{fosid}} ```

$ unset "FORTIOS_IMPORT_TABLE"

func GetExtender 

func GetExtender(ctx *pulumi.Context,
	name string, id pulumi.IDInput, state *ExtenderState, opts ...pulumi.ResourceOption) (*Extender, error)

GetExtender gets an existing Extender resource's state with the given name, ID, and optional state properties that are used to uniquely qualify the lookup (nil if not required).

func NewExtender 

func NewExtender(ctx *pulumi.Context,
	name string, args *ExtenderArgs, opts ...pulumi.ResourceOption) (*Extender, error)

NewExtender registers a new resource with the given unique name, arguments, and options.

func (*Extender) ElementType 

func (*Extender) ElementType() reflect.Type

func (*Extender) ToExtenderOutput 

func (i *Extender) ToExtenderOutput() ExtenderOutput

func (*Extender) ToExtenderOutputWithContext 

func (i *Extender) ToExtenderOutputWithContext(ctx context.Context) ExtenderOutput

type Extender1 

type Extender1 struct {
	pulumi.CustomResourceState

	// FortiExtender Administration (enable or disable). Valid values: `disable`, `enable`.
	Authorized pulumi.StringOutput `pulumi:"authorized"`
	// FortiExtender controller report configuration. The structure of `controllerReport` block is documented below.
	ControllerReport Extender1ControllerReportOutput `pulumi:"controllerReport"`
	// Description.
	Description pulumi.StringOutput `pulumi:"description"`
	// FortiExtender name.
	ExtName pulumi.StringOutput `pulumi:"extName"`
	// FortiExtender serial number.
	Fosid pulumi.StringOutput `pulumi:"fosid"`
	// Get all sub-tables including unconfigured tables. Do not set this variable to true if you configure sub-table in another resource, otherwise, conflicts and overwrite will occur. Options: [ false, true ]. false: Default value, do not get unconfigured tables; true: get all tables including unconfigured tables.
	GetAllTables pulumi.StringPtrOutput `pulumi:"getAllTables"`
	// FortiExtender login password.
	LoginPassword pulumi.StringPtrOutput `pulumi:"loginPassword"`
	// Configuration options for modem 1. The structure of `modem1` block is documented below.
	Modem1 Extender1Modem1Output `pulumi:"modem1"`
	// Configuration options for modem 2. The structure of `modem2` block is documented below.
	Modem2 Extender1Modem2Output `pulumi:"modem2"`
	// FortiExtender entry name.
	Name pulumi.StringOutput `pulumi:"name"`
	// VDOM
	Vdom pulumi.IntOutput `pulumi:"vdom"`
	// Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
	Vdomparam pulumi.StringOutput `pulumi:"vdomparam"`
}

Extender controller configuration. This resource will be deprecated. For FortiOS Version >= 7.2.1, using `extensioncontroller.Extender`. For FortiOS version < 7.2.1, see `extendercontroller.Extender`

## Example Usage

```go package main

import ( 

"github.com/pulumi/pulumi/sdk/v3/go/pulumi"
"github.com/pulumiverse/pulumi-fortios/sdk/go/fortios/extendercontroller"

) 

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		_, err := extendercontroller.NewExtender1(ctx, "trname", &extendercontroller.Extender1Args{
			Authorized: pulumi.String("disable"),
			ControllerReport: &extendercontroller.Extender1ControllerReportArgs{
				Interval:        pulumi.Int(300),
				SignalThreshold: pulumi.Int(10),
				Status:          pulumi.String("disable"),
			},
			ExtName: pulumi.String("2932"),
			Fosid:   pulumi.String("FX201E5919004031"),
			Modem1: &extendercontroller.Extender1Modem1Args{
				AutoSwitch: &extendercontroller.Extender1Modem1AutoSwitchArgs{
					Dataplan:            pulumi.String("disable"),
					Disconnect:          pulumi.String("disable"),
					DisconnectPeriod:    pulumi.Int(600),
					DisconnectThreshold: pulumi.Int(3),
					Signal:              pulumi.String("disable"),
					SwitchBack:          pulumi.String("timer"),
					SwitchBackTime:      pulumi.String("00:01"),
					SwitchBackTimer:     pulumi.Int(86400),
				},
				ConnStatus:    pulumi.Int(0),
				DefaultSim:    pulumi.String("sim2"),
				Gps:           pulumi.String("enable"),
				RedundantIntf: pulumi.String("s1"),
				RedundantMode: pulumi.String("enable"),
				Sim1Pin:       pulumi.String("disable"),
				Sim1PinCode:   pulumi.String("testpincode"),
				Sim2Pin:       pulumi.String("disable"),
			},
			Modem2: &extendercontroller.Extender1Modem2Args{
				AutoSwitch: &extendercontroller.Extender1Modem2AutoSwitchArgs{
					Dataplan:            pulumi.String("disable"),
					Disconnect:          pulumi.String("disable"),
					DisconnectPeriod:    pulumi.Int(600),
					DisconnectThreshold: pulumi.Int(3),
					Signal:              pulumi.String("disable"),
					SwitchBackTime:      pulumi.String("00:01"),
					SwitchBackTimer:     pulumi.Int(86400),
				},
				ConnStatus:    pulumi.Int(0),
				DefaultSim:    pulumi.String("sim1"),
				Gps:           pulumi.String("enable"),
				RedundantMode: pulumi.String("disable"),
				Sim1Pin:       pulumi.String("disable"),
				Sim2Pin:       pulumi.String("disable"),
			},
			Vdom: pulumi.Int(0),
		})
		if err != nil {
			return err
		}
		return nil
	})
}

```

## Import

ExtenderController Extender1 can be imported using any of these accepted formats:

```sh $ pulumi import fortios:extendercontroller/extender1:Extender1 labelname {{name}} ```

If you do not want to import arguments of block:

$ export "FORTIOS_IMPORT_TABLE"="false"

```sh $ pulumi import fortios:extendercontroller/extender1:Extender1 labelname {{name}} ```

$ unset "FORTIOS_IMPORT_TABLE"

func GetExtender1 

func GetExtender1(ctx *pulumi.Context,
	name string, id pulumi.IDInput, state *Extender1State, opts ...pulumi.ResourceOption) (*Extender1, error)

GetExtender1 gets an existing Extender1 resource's state with the given name, ID, and optional state properties that are used to uniquely qualify the lookup (nil if not required).

func NewExtender1 

func NewExtender1(ctx *pulumi.Context,
	name string, args *Extender1Args, opts ...pulumi.ResourceOption) (*Extender1, error)

NewExtender1 registers a new resource with the given unique name, arguments, and options.

func (*Extender1) ElementType 

func (*Extender1) ElementType() reflect.Type

func (*Extender1) ToExtender1Output 

func (i *Extender1) ToExtender1Output() Extender1Output

func (*Extender1) ToExtender1OutputWithContext 

func (i *Extender1) ToExtender1OutputWithContext(ctx context.Context) Extender1Output

type Extender1Args 

type Extender1Args struct {
	// FortiExtender Administration (enable or disable). Valid values: `disable`, `enable`.
	Authorized pulumi.StringInput
	// FortiExtender controller report configuration. The structure of `controllerReport` block is documented below.
	ControllerReport Extender1ControllerReportPtrInput
	// Description.
	Description pulumi.StringPtrInput
	// FortiExtender name.
	ExtName pulumi.StringPtrInput
	// FortiExtender serial number.
	Fosid pulumi.StringPtrInput
	// Get all sub-tables including unconfigured tables. Do not set this variable to true if you configure sub-table in another resource, otherwise, conflicts and overwrite will occur. Options: [ false, true ]. false: Default value, do not get unconfigured tables; true: get all tables including unconfigured tables.
	GetAllTables pulumi.StringPtrInput
	// FortiExtender login password.
	LoginPassword pulumi.StringPtrInput
	// Configuration options for modem 1. The structure of `modem1` block is documented below.
	Modem1 Extender1Modem1PtrInput
	// Configuration options for modem 2. The structure of `modem2` block is documented below.
	Modem2 Extender1Modem2PtrInput
	// FortiExtender entry name.
	Name pulumi.StringPtrInput
	// VDOM
	Vdom pulumi.IntPtrInput
	// Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
	Vdomparam pulumi.StringPtrInput
}

The set of arguments for constructing a Extender1 resource.

func (Extender1Args) ElementType 

func (Extender1Args) ElementType() reflect.Type

type Extender1Array 

type Extender1Array []Extender1Input

func (Extender1Array) ElementType 

func (Extender1Array) ElementType() reflect.Type

func (Extender1Array) ToExtender1ArrayOutput 

func (i Extender1Array) ToExtender1ArrayOutput() Extender1ArrayOutput

func (Extender1Array) ToExtender1ArrayOutputWithContext 

func (i Extender1Array) ToExtender1ArrayOutputWithContext(ctx context.Context) Extender1ArrayOutput

type Extender1ArrayInput 

type Extender1ArrayInput interface {
	pulumi.Input

	ToExtender1ArrayOutput() Extender1ArrayOutput
	ToExtender1ArrayOutputWithContext(context.Context) Extender1ArrayOutput
}

Extender1ArrayInput is an input type that accepts Extender1Array and Extender1ArrayOutput values. You can construct a concrete instance of `Extender1ArrayInput` via: 

Extender1Array{ Extender1Args{...} }

type Extender1ArrayOutput 

type Extender1ArrayOutput struct{ *pulumi.OutputState }

func (Extender1ArrayOutput) ElementType 

func (Extender1ArrayOutput) ElementType() reflect.Type

func (Extender1ArrayOutput) Index 

func (o Extender1ArrayOutput) Index(i pulumi.IntInput) Extender1Output

func (Extender1ArrayOutput) ToExtender1ArrayOutput 

func (o Extender1ArrayOutput) ToExtender1ArrayOutput() Extender1ArrayOutput

func (Extender1ArrayOutput) ToExtender1ArrayOutputWithContext 

func (o Extender1ArrayOutput) ToExtender1ArrayOutputWithContext(ctx context.Context) Extender1ArrayOutput

type Extender1ControllerReport 

type Extender1ControllerReport struct {
	// Controller report interval.
	Interval *int `pulumi:"interval"`
	// Controller report signal threshold.
	//
	// The `modem1` block supports:
	SignalThreshold *int `pulumi:"signalThreshold"`
	// FortiExtender controller report status. Valid values: `disable`, `enable`.
	Status *string `pulumi:"status"`
}

type Extender1ControllerReportArgs 

type Extender1ControllerReportArgs struct {
	// Controller report interval.
	Interval pulumi.IntPtrInput `pulumi:"interval"`
	// Controller report signal threshold.
	//
	// The `modem1` block supports:
	SignalThreshold pulumi.IntPtrInput `pulumi:"signalThreshold"`
	// FortiExtender controller report status. Valid values: `disable`, `enable`.
	Status pulumi.StringPtrInput `pulumi:"status"`
}

func (Extender1ControllerReportArgs) ElementType 

func (Extender1ControllerReportArgs) ElementType() reflect.Type

func (Extender1ControllerReportArgs) ToExtender1ControllerReportOutput 

func (i Extender1ControllerReportArgs) ToExtender1ControllerReportOutput() Extender1ControllerReportOutput

func (Extender1ControllerReportArgs) ToExtender1ControllerReportOutputWithContext 

func (i Extender1ControllerReportArgs) ToExtender1ControllerReportOutputWithContext(ctx context.Context) Extender1ControllerReportOutput

func (Extender1ControllerReportArgs) ToExtender1ControllerReportPtrOutput 

func (i Extender1ControllerReportArgs) ToExtender1ControllerReportPtrOutput() Extender1ControllerReportPtrOutput

func (Extender1ControllerReportArgs) ToExtender1ControllerReportPtrOutputWithContext 

func (i Extender1ControllerReportArgs) ToExtender1ControllerReportPtrOutputWithContext(ctx context.Context) Extender1ControllerReportPtrOutput

type Extender1ControllerReportInput 

type Extender1ControllerReportInput interface {
	pulumi.Input

	ToExtender1ControllerReportOutput() Extender1ControllerReportOutput
	ToExtender1ControllerReportOutputWithContext(context.Context) Extender1ControllerReportOutput
}

Extender1ControllerReportInput is an input type that accepts Extender1ControllerReportArgs and Extender1ControllerReportOutput values. You can construct a concrete instance of `Extender1ControllerReportInput` via: 

Extender1ControllerReportArgs{...}

type Extender1ControllerReportOutput 

type Extender1ControllerReportOutput struct{ *pulumi.OutputState }

func (Extender1ControllerReportOutput) ElementType 

func (Extender1ControllerReportOutput) ElementType() reflect.Type

func (Extender1ControllerReportOutput) Interval 

func (o Extender1ControllerReportOutput) Interval() pulumi.IntPtrOutput

Controller report interval.

func (Extender1ControllerReportOutput) SignalThreshold 

func (o Extender1ControllerReportOutput) SignalThreshold() pulumi.IntPtrOutput

Controller report signal threshold.

The `modem1` block supports:

func (Extender1ControllerReportOutput) Status 

func (o Extender1ControllerReportOutput) Status() pulumi.StringPtrOutput

FortiExtender controller report status. Valid values: `disable`, `enable`.

func (Extender1ControllerReportOutput) ToExtender1ControllerReportOutput 

func (o Extender1ControllerReportOutput) ToExtender1ControllerReportOutput() Extender1ControllerReportOutput

func (Extender1ControllerReportOutput) ToExtender1ControllerReportOutputWithContext 

func (o Extender1ControllerReportOutput) ToExtender1ControllerReportOutputWithContext(ctx context.Context) Extender1ControllerReportOutput

func (Extender1ControllerReportOutput) ToExtender1ControllerReportPtrOutput 

func (o Extender1ControllerReportOutput) ToExtender1ControllerReportPtrOutput() Extender1ControllerReportPtrOutput

func (Extender1ControllerReportOutput) ToExtender1ControllerReportPtrOutputWithContext 

func (o Extender1ControllerReportOutput) ToExtender1ControllerReportPtrOutputWithContext(ctx context.Context) Extender1ControllerReportPtrOutput

type Extender1ControllerReportPtrInput 

type Extender1ControllerReportPtrInput interface {
	pulumi.Input

	ToExtender1ControllerReportPtrOutput() Extender1ControllerReportPtrOutput
	ToExtender1ControllerReportPtrOutputWithContext(context.Context) Extender1ControllerReportPtrOutput
}

Extender1ControllerReportPtrInput is an input type that accepts Extender1ControllerReportArgs, Extender1ControllerReportPtr and Extender1ControllerReportPtrOutput values. You can construct a concrete instance of `Extender1ControllerReportPtrInput` via: 

        Extender1ControllerReportArgs{...}

or:

        nil

func Extender1ControllerReportPtr 

func Extender1ControllerReportPtr(v *Extender1ControllerReportArgs) Extender1ControllerReportPtrInput

type Extender1ControllerReportPtrOutput 

type Extender1ControllerReportPtrOutput struct{ *pulumi.OutputState }

func (Extender1ControllerReportPtrOutput) Elem 

func (o Extender1ControllerReportPtrOutput) Elem() Extender1ControllerReportOutput

func (Extender1ControllerReportPtrOutput) ElementType 

func (Extender1ControllerReportPtrOutput) ElementType() reflect.Type

func (Extender1ControllerReportPtrOutput) Interval 

func (o Extender1ControllerReportPtrOutput) Interval() pulumi.IntPtrOutput

Controller report interval.

func (Extender1ControllerReportPtrOutput) SignalThreshold 

func (o Extender1ControllerReportPtrOutput) SignalThreshold() pulumi.IntPtrOutput

Controller report signal threshold.

The `modem1` block supports:

func (Extender1ControllerReportPtrOutput) Status 

func (o Extender1ControllerReportPtrOutput) Status() pulumi.StringPtrOutput

FortiExtender controller report status. Valid values: `disable`, `enable`.

func (Extender1ControllerReportPtrOutput) ToExtender1ControllerReportPtrOutput 

func (o Extender1ControllerReportPtrOutput) ToExtender1ControllerReportPtrOutput() Extender1ControllerReportPtrOutput

func (Extender1ControllerReportPtrOutput) ToExtender1ControllerReportPtrOutputWithContext 

func (o Extender1ControllerReportPtrOutput) ToExtender1ControllerReportPtrOutputWithContext(ctx context.Context) Extender1ControllerReportPtrOutput

type Extender1Input 

type Extender1Input interface {
	pulumi.Input

	ToExtender1Output() Extender1Output
	ToExtender1OutputWithContext(ctx context.Context) Extender1Output
}

type Extender1Map 

type Extender1Map map[string]Extender1Input

func (Extender1Map) ElementType 

func (Extender1Map) ElementType() reflect.Type

func (Extender1Map) ToExtender1MapOutput 

func (i Extender1Map) ToExtender1MapOutput() Extender1MapOutput

func (Extender1Map) ToExtender1MapOutputWithContext 

func (i Extender1Map) ToExtender1MapOutputWithContext(ctx context.Context) Extender1MapOutput

type Extender1MapInput 

type Extender1MapInput interface {
	pulumi.Input

	ToExtender1MapOutput() Extender1MapOutput
	ToExtender1MapOutputWithContext(context.Context) Extender1MapOutput
}

Extender1MapInput is an input type that accepts Extender1Map and Extender1MapOutput values. You can construct a concrete instance of `Extender1MapInput` via: 

Extender1Map{ "key": Extender1Args{...} }

type Extender1MapOutput 

type Extender1MapOutput struct{ *pulumi.OutputState }

func (Extender1MapOutput) ElementType 

func (Extender1MapOutput) ElementType() reflect.Type

func (Extender1MapOutput) MapIndex 

func (o Extender1MapOutput) MapIndex(k pulumi.StringInput) Extender1Output

func (Extender1MapOutput) ToExtender1MapOutput 

func (o Extender1MapOutput) ToExtender1MapOutput() Extender1MapOutput

func (Extender1MapOutput) ToExtender1MapOutputWithContext 

func (o Extender1MapOutput) ToExtender1MapOutputWithContext(ctx context.Context) Extender1MapOutput

type Extender1Modem1 

type Extender1Modem1 struct {
	AutoSwitch       *Extender1Modem1AutoSwitch `pulumi:"autoSwitch"`
	ConnStatus       *int                       `pulumi:"connStatus"`
	DefaultSim       *string                    `pulumi:"defaultSim"`
	Gps              *string                    `pulumi:"gps"`
	Ifname           *string                    `pulumi:"ifname"`
	PreferredCarrier *string                    `pulumi:"preferredCarrier"`
	RedundantIntf    *string                    `pulumi:"redundantIntf"`
	RedundantMode    *string                    `pulumi:"redundantMode"`
	Sim1Pin          *string                    `pulumi:"sim1Pin"`
	Sim1PinCode      *string                    `pulumi:"sim1PinCode"`
	Sim2Pin          *string                    `pulumi:"sim2Pin"`
	Sim2PinCode      *string                    `pulumi:"sim2PinCode"`
}

type Extender1Modem1Args 

type Extender1Modem1Args struct {
	AutoSwitch       Extender1Modem1AutoSwitchPtrInput `pulumi:"autoSwitch"`
	ConnStatus       pulumi.IntPtrInput                `pulumi:"connStatus"`
	DefaultSim       pulumi.StringPtrInput             `pulumi:"defaultSim"`
	Gps              pulumi.StringPtrInput             `pulumi:"gps"`
	Ifname           pulumi.StringPtrInput             `pulumi:"ifname"`
	PreferredCarrier pulumi.StringPtrInput             `pulumi:"preferredCarrier"`
	RedundantIntf    pulumi.StringPtrInput             `pulumi:"redundantIntf"`
	RedundantMode    pulumi.StringPtrInput             `pulumi:"redundantMode"`
	Sim1Pin          pulumi.StringPtrInput             `pulumi:"sim1Pin"`
	Sim1PinCode      pulumi.StringPtrInput             `pulumi:"sim1PinCode"`
	Sim2Pin          pulumi.StringPtrInput             `pulumi:"sim2Pin"`
	Sim2PinCode      pulumi.StringPtrInput             `pulumi:"sim2PinCode"`
}

func (Extender1Modem1Args) ElementType 

func (Extender1Modem1Args) ElementType() reflect.Type

func (Extender1Modem1Args) ToExtender1Modem1Output 

func (i Extender1Modem1Args) ToExtender1Modem1Output() Extender1Modem1Output

func (Extender1Modem1Args) ToExtender1Modem1OutputWithContext 

func (i Extender1Modem1Args) ToExtender1Modem1OutputWithContext(ctx context.Context) Extender1Modem1Output

func (Extender1Modem1Args) ToExtender1Modem1PtrOutput 

func (i Extender1Modem1Args) ToExtender1Modem1PtrOutput() Extender1Modem1PtrOutput

func (Extender1Modem1Args) ToExtender1Modem1PtrOutputWithContext 

func (i Extender1Modem1Args) ToExtender1Modem1PtrOutputWithContext(ctx context.Context) Extender1Modem1PtrOutput

type Extender1Modem1AutoSwitch 

type Extender1Modem1AutoSwitch struct {
	// Automatically switch based on data usage. Valid values: `disable`, `enable`.
	Dataplan *string `pulumi:"dataplan"`
	// Auto switch by disconnect. Valid values: `disable`, `enable`.
	Disconnect *string `pulumi:"disconnect"`
	// Automatically switch based on disconnect period.
	DisconnectPeriod *int `pulumi:"disconnectPeriod"`
	// Automatically switch based on disconnect threshold.
	DisconnectThreshold *int `pulumi:"disconnectThreshold"`
	// Automatically switch based on signal strength. Valid values: `disable`, `enable`.
	Signal *string `pulumi:"signal"`
	// Auto switch with switch back multi-options. Valid values: `time`, `timer`.
	SwitchBack *string `pulumi:"switchBack"`
	// Automatically switch over to preferred SIM/carrier at a specified time in UTC (HH:MM).
	SwitchBackTime *string `pulumi:"switchBackTime"`
	// Automatically switch over to preferred SIM/carrier after the given time (3600 - 2147483647 sec).
	SwitchBackTimer *int `pulumi:"switchBackTimer"`
}

type Extender1Modem1AutoSwitchArgs 

type Extender1Modem1AutoSwitchArgs struct {
	// Automatically switch based on data usage. Valid values: `disable`, `enable`.
	Dataplan pulumi.StringPtrInput `pulumi:"dataplan"`
	// Auto switch by disconnect. Valid values: `disable`, `enable`.
	Disconnect pulumi.StringPtrInput `pulumi:"disconnect"`
	// Automatically switch based on disconnect period.
	DisconnectPeriod pulumi.IntPtrInput `pulumi:"disconnectPeriod"`
	// Automatically switch based on disconnect threshold.
	DisconnectThreshold pulumi.IntPtrInput `pulumi:"disconnectThreshold"`
	// Automatically switch based on signal strength. Valid values: `disable`, `enable`.
	Signal pulumi.StringPtrInput `pulumi:"signal"`
	// Auto switch with switch back multi-options. Valid values: `time`, `timer`.
	SwitchBack pulumi.StringPtrInput `pulumi:"switchBack"`
	// Automatically switch over to preferred SIM/carrier at a specified time in UTC (HH:MM).
	SwitchBackTime pulumi.StringPtrInput `pulumi:"switchBackTime"`
	// Automatically switch over to preferred SIM/carrier after the given time (3600 - 2147483647 sec).
	SwitchBackTimer pulumi.IntPtrInput `pulumi:"switchBackTimer"`
}

func (Extender1Modem1AutoSwitchArgs) ElementType 

func (Extender1Modem1AutoSwitchArgs) ElementType() reflect.Type

func (Extender1Modem1AutoSwitchArgs) ToExtender1Modem1AutoSwitchOutput 

func (i Extender1Modem1AutoSwitchArgs) ToExtender1Modem1AutoSwitchOutput() Extender1Modem1AutoSwitchOutput

func (Extender1Modem1AutoSwitchArgs) ToExtender1Modem1AutoSwitchOutputWithContext 

func (i Extender1Modem1AutoSwitchArgs) ToExtender1Modem1AutoSwitchOutputWithContext(ctx context.Context) Extender1Modem1AutoSwitchOutput

func (Extender1Modem1AutoSwitchArgs) ToExtender1Modem1AutoSwitchPtrOutput 

func (i Extender1Modem1AutoSwitchArgs) ToExtender1Modem1AutoSwitchPtrOutput() Extender1Modem1AutoSwitchPtrOutput

func (Extender1Modem1AutoSwitchArgs) ToExtender1Modem1AutoSwitchPtrOutputWithContext 

func (i Extender1Modem1AutoSwitchArgs) ToExtender1Modem1AutoSwitchPtrOutputWithContext(ctx context.Context) Extender1Modem1AutoSwitchPtrOutput

type Extender1Modem1AutoSwitchInput 

type Extender1Modem1AutoSwitchInput interface {
	pulumi.Input

	ToExtender1Modem1AutoSwitchOutput() Extender1Modem1AutoSwitchOutput
	ToExtender1Modem1AutoSwitchOutputWithContext(context.Context) Extender1Modem1AutoSwitchOutput
}

Extender1Modem1AutoSwitchInput is an input type that accepts Extender1Modem1AutoSwitchArgs and Extender1Modem1AutoSwitchOutput values. You can construct a concrete instance of `Extender1Modem1AutoSwitchInput` via: 

Extender1Modem1AutoSwitchArgs{...}

type Extender1Modem1AutoSwitchOutput 

type Extender1Modem1AutoSwitchOutput struct{ *pulumi.OutputState }

func (Extender1Modem1AutoSwitchOutput) Dataplan 

func (o Extender1Modem1AutoSwitchOutput) Dataplan() pulumi.StringPtrOutput

Automatically switch based on data usage. Valid values: `disable`, `enable`.

func (Extender1Modem1AutoSwitchOutput) Disconnect 

func (o Extender1Modem1AutoSwitchOutput) Disconnect() pulumi.StringPtrOutput

Auto switch by disconnect. Valid values: `disable`, `enable`.

func (Extender1Modem1AutoSwitchOutput) DisconnectPeriod 

func (o Extender1Modem1AutoSwitchOutput) DisconnectPeriod() pulumi.IntPtrOutput

Automatically switch based on disconnect period.

func (Extender1Modem1AutoSwitchOutput) DisconnectThreshold 

func (o Extender1Modem1AutoSwitchOutput) DisconnectThreshold() pulumi.IntPtrOutput

Automatically switch based on disconnect threshold.

func (Extender1Modem1AutoSwitchOutput) ElementType 

func (Extender1Modem1AutoSwitchOutput) ElementType() reflect.Type

func (Extender1Modem1AutoSwitchOutput) Signal 

func (o Extender1Modem1AutoSwitchOutput) Signal() pulumi.StringPtrOutput

Automatically switch based on signal strength. Valid values: `disable`, `enable`.

func (Extender1Modem1AutoSwitchOutput) SwitchBack 

func (o Extender1Modem1AutoSwitchOutput) SwitchBack() pulumi.StringPtrOutput

Auto switch with switch back multi-options. Valid values: `time`, `timer`.

func (Extender1Modem1AutoSwitchOutput) SwitchBackTime 

func (o Extender1Modem1AutoSwitchOutput) SwitchBackTime() pulumi.StringPtrOutput

Automatically switch over to preferred SIM/carrier at a specified time in UTC (HH:MM).

func (Extender1Modem1AutoSwitchOutput) SwitchBackTimer 

func (o Extender1Modem1AutoSwitchOutput) SwitchBackTimer() pulumi.IntPtrOutput

Automatically switch over to preferred SIM/carrier after the given time (3600 - 2147483647 sec).

func (Extender1Modem1AutoSwitchOutput) ToExtender1Modem1AutoSwitchOutput 

func (o Extender1Modem1AutoSwitchOutput) ToExtender1Modem1AutoSwitchOutput() Extender1Modem1AutoSwitchOutput

func (Extender1Modem1AutoSwitchOutput) ToExtender1Modem1AutoSwitchOutputWithContext 

func (o Extender1Modem1AutoSwitchOutput) ToExtender1Modem1AutoSwitchOutputWithContext(ctx context.Context) Extender1Modem1AutoSwitchOutput

func (Extender1Modem1AutoSwitchOutput) ToExtender1Modem1AutoSwitchPtrOutput 

func (o Extender1Modem1AutoSwitchOutput) ToExtender1Modem1AutoSwitchPtrOutput() Extender1Modem1AutoSwitchPtrOutput

func (Extender1Modem1AutoSwitchOutput) ToExtender1Modem1AutoSwitchPtrOutputWithContext 

func (o Extender1Modem1AutoSwitchOutput) ToExtender1Modem1AutoSwitchPtrOutputWithContext(ctx context.Context) Extender1Modem1AutoSwitchPtrOutput

type Extender1Modem1AutoSwitchPtrInput 

type Extender1Modem1AutoSwitchPtrInput interface {
	pulumi.Input

	ToExtender1Modem1AutoSwitchPtrOutput() Extender1Modem1AutoSwitchPtrOutput
	ToExtender1Modem1AutoSwitchPtrOutputWithContext(context.Context) Extender1Modem1AutoSwitchPtrOutput
}

Extender1Modem1AutoSwitchPtrInput is an input type that accepts Extender1Modem1AutoSwitchArgs, Extender1Modem1AutoSwitchPtr and Extender1Modem1AutoSwitchPtrOutput values. You can construct a concrete instance of `Extender1Modem1AutoSwitchPtrInput` via: 

        Extender1Modem1AutoSwitchArgs{...}

or:

        nil

func Extender1Modem1AutoSwitchPtr 

func Extender1Modem1AutoSwitchPtr(v *Extender1Modem1AutoSwitchArgs) Extender1Modem1AutoSwitchPtrInput

type Extender1Modem1AutoSwitchPtrOutput 

type Extender1Modem1AutoSwitchPtrOutput struct{ *pulumi.OutputState }

func (Extender1Modem1AutoSwitchPtrOutput) Dataplan 

func (o Extender1Modem1AutoSwitchPtrOutput) Dataplan() pulumi.StringPtrOutput

Automatically switch based on data usage. Valid values: `disable`, `enable`.

func (Extender1Modem1AutoSwitchPtrOutput) Disconnect 

func (o Extender1Modem1AutoSwitchPtrOutput) Disconnect() pulumi.StringPtrOutput

Auto switch by disconnect. Valid values: `disable`, `enable`.

func (Extender1Modem1AutoSwitchPtrOutput) DisconnectPeriod 

func (o Extender1Modem1AutoSwitchPtrOutput) DisconnectPeriod() pulumi.IntPtrOutput

Automatically switch based on disconnect period.

func (Extender1Modem1AutoSwitchPtrOutput) DisconnectThreshold 

func (o Extender1Modem1AutoSwitchPtrOutput) DisconnectThreshold() pulumi.IntPtrOutput

Automatically switch based on disconnect threshold.

func (Extender1Modem1AutoSwitchPtrOutput) Elem 

func (o Extender1Modem1AutoSwitchPtrOutput) Elem() Extender1Modem1AutoSwitchOutput

func (Extender1Modem1AutoSwitchPtrOutput) ElementType 

func (Extender1Modem1AutoSwitchPtrOutput) ElementType() reflect.Type

func (Extender1Modem1AutoSwitchPtrOutput) Signal 

func (o Extender1Modem1AutoSwitchPtrOutput) Signal() pulumi.StringPtrOutput

Automatically switch based on signal strength. Valid values: `disable`, `enable`.

func (Extender1Modem1AutoSwitchPtrOutput) SwitchBack 

func (o Extender1Modem1AutoSwitchPtrOutput) SwitchBack() pulumi.StringPtrOutput

Auto switch with switch back multi-options. Valid values: `time`, `timer`.

func (Extender1Modem1AutoSwitchPtrOutput) SwitchBackTime 

func (o Extender1Modem1AutoSwitchPtrOutput) SwitchBackTime() pulumi.StringPtrOutput

Automatically switch over to preferred SIM/carrier at a specified time in UTC (HH:MM).

func (Extender1Modem1AutoSwitchPtrOutput) SwitchBackTimer 

func (o Extender1Modem1AutoSwitchPtrOutput) SwitchBackTimer() pulumi.IntPtrOutput

Automatically switch over to preferred SIM/carrier after the given time (3600 - 2147483647 sec).

func (Extender1Modem1AutoSwitchPtrOutput) ToExtender1Modem1AutoSwitchPtrOutput 

func (o Extender1Modem1AutoSwitchPtrOutput) ToExtender1Modem1AutoSwitchPtrOutput() Extender1Modem1AutoSwitchPtrOutput

func (Extender1Modem1AutoSwitchPtrOutput) ToExtender1Modem1AutoSwitchPtrOutputWithContext 

func (o Extender1Modem1AutoSwitchPtrOutput) ToExtender1Modem1AutoSwitchPtrOutputWithContext(ctx context.Context) Extender1Modem1AutoSwitchPtrOutput

type Extender1Modem1Input 

type Extender1Modem1Input interface {
	pulumi.Input

	ToExtender1Modem1Output() Extender1Modem1Output
	ToExtender1Modem1OutputWithContext(context.Context) Extender1Modem1Output
}

Extender1Modem1Input is an input type that accepts Extender1Modem1Args and Extender1Modem1Output values. You can construct a concrete instance of `Extender1Modem1Input` via: 

Extender1Modem1Args{...}

type Extender1Modem1Output 

type Extender1Modem1Output struct{ *pulumi.OutputState }

func (Extender1Modem1Output) AutoSwitch 

func (o Extender1Modem1Output) AutoSwitch() Extender1Modem1AutoSwitchPtrOutput

func (Extender1Modem1Output) ConnStatus 

func (o Extender1Modem1Output) ConnStatus() pulumi.IntPtrOutput

func (Extender1Modem1Output) DefaultSim 

func (o Extender1Modem1Output) DefaultSim() pulumi.StringPtrOutput

func (Extender1Modem1Output) ElementType 

func (Extender1Modem1Output) ElementType() reflect.Type

func (Extender1Modem1Output) Gps 

func (o Extender1Modem1Output) Gps() pulumi.StringPtrOutput

func (Extender1Modem1Output) Ifname 

func (o Extender1Modem1Output) Ifname() pulumi.StringPtrOutput

func (Extender1Modem1Output) PreferredCarrier 

func (o Extender1Modem1Output) PreferredCarrier() pulumi.StringPtrOutput

func (Extender1Modem1Output) RedundantIntf 

func (o Extender1Modem1Output) RedundantIntf() pulumi.StringPtrOutput

func (Extender1Modem1Output) RedundantMode 

func (o Extender1Modem1Output) RedundantMode() pulumi.StringPtrOutput

func (Extender1Modem1Output) Sim1Pin 

func (o Extender1Modem1Output) Sim1Pin() pulumi.StringPtrOutput

func (Extender1Modem1Output) Sim1PinCode 

func (o Extender1Modem1Output) Sim1PinCode() pulumi.StringPtrOutput

func (Extender1Modem1Output) Sim2Pin 

func (o Extender1Modem1Output) Sim2Pin() pulumi.StringPtrOutput

func (Extender1Modem1Output) Sim2PinCode 

func (o Extender1Modem1Output) Sim2PinCode() pulumi.StringPtrOutput

func (Extender1Modem1Output) ToExtender1Modem1Output 

func (o Extender1Modem1Output) ToExtender1Modem1Output() Extender1Modem1Output

func (Extender1Modem1Output) ToExtender1Modem1OutputWithContext 

func (o Extender1Modem1Output) ToExtender1Modem1OutputWithContext(ctx context.Context) Extender1Modem1Output

func (Extender1Modem1Output) ToExtender1Modem1PtrOutput 

func (o Extender1Modem1Output) ToExtender1Modem1PtrOutput() Extender1Modem1PtrOutput

func (Extender1Modem1Output) ToExtender1Modem1PtrOutputWithContext 

func (o Extender1Modem1Output) ToExtender1Modem1PtrOutputWithContext(ctx context.Context) Extender1Modem1PtrOutput

type Extender1Modem1PtrInput 

type Extender1Modem1PtrInput interface {
	pulumi.Input

	ToExtender1Modem1PtrOutput() Extender1Modem1PtrOutput
	ToExtender1Modem1PtrOutputWithContext(context.Context) Extender1Modem1PtrOutput
}

Extender1Modem1PtrInput is an input type that accepts Extender1Modem1Args, Extender1Modem1Ptr and Extender1Modem1PtrOutput values. You can construct a concrete instance of `Extender1Modem1PtrInput` via: 

        Extender1Modem1Args{...}

or:

        nil

func Extender1Modem1Ptr 

func Extender1Modem1Ptr(v *Extender1Modem1Args) Extender1Modem1PtrInput

type Extender1Modem1PtrOutput 

type Extender1Modem1PtrOutput struct{ *pulumi.OutputState }

func (Extender1Modem1PtrOutput) AutoSwitch 

func (o Extender1Modem1PtrOutput) AutoSwitch() Extender1Modem1AutoSwitchPtrOutput

func (Extender1Modem1PtrOutput) ConnStatus 

func (o Extender1Modem1PtrOutput) ConnStatus() pulumi.IntPtrOutput

func (Extender1Modem1PtrOutput) DefaultSim 

func (o Extender1Modem1PtrOutput) DefaultSim() pulumi.StringPtrOutput

func (Extender1Modem1PtrOutput) Elem 

func (o Extender1Modem1PtrOutput) Elem() Extender1Modem1Output

func (Extender1Modem1PtrOutput) ElementType 

func (Extender1Modem1PtrOutput) ElementType() reflect.Type

func (Extender1Modem1PtrOutput) Gps 

func (o Extender1Modem1PtrOutput) Gps() pulumi.StringPtrOutput

func (Extender1Modem1PtrOutput) Ifname 

func (o Extender1Modem1PtrOutput) Ifname() pulumi.StringPtrOutput

func (Extender1Modem1PtrOutput) PreferredCarrier 

func (o Extender1Modem1PtrOutput) PreferredCarrier() pulumi.StringPtrOutput

func (Extender1Modem1PtrOutput) RedundantIntf 

func (o Extender1Modem1PtrOutput) RedundantIntf() pulumi.StringPtrOutput

func (Extender1Modem1PtrOutput) RedundantMode 

func (o Extender1Modem1PtrOutput) RedundantMode() pulumi.StringPtrOutput

func (Extender1Modem1PtrOutput) Sim1Pin 

func (o Extender1Modem1PtrOutput) Sim1Pin() pulumi.StringPtrOutput

func (Extender1Modem1PtrOutput) Sim1PinCode 

func (o Extender1Modem1PtrOutput) Sim1PinCode() pulumi.StringPtrOutput

func (Extender1Modem1PtrOutput) Sim2Pin 

func (o Extender1Modem1PtrOutput) Sim2Pin() pulumi.StringPtrOutput

func (Extender1Modem1PtrOutput) Sim2PinCode 

func (o Extender1Modem1PtrOutput) Sim2PinCode() pulumi.StringPtrOutput

func (Extender1Modem1PtrOutput) ToExtender1Modem1PtrOutput 

func (o Extender1Modem1PtrOutput) ToExtender1Modem1PtrOutput() Extender1Modem1PtrOutput

func (Extender1Modem1PtrOutput) ToExtender1Modem1PtrOutputWithContext 

func (o Extender1Modem1PtrOutput) ToExtender1Modem1PtrOutputWithContext(ctx context.Context) Extender1Modem1PtrOutput

type Extender1Modem2 

type Extender1Modem2 struct {
	AutoSwitch       *Extender1Modem2AutoSwitch `pulumi:"autoSwitch"`
	ConnStatus       *int                       `pulumi:"connStatus"`
	DefaultSim       *string                    `pulumi:"defaultSim"`
	Gps              *string                    `pulumi:"gps"`
	Ifname           *string                    `pulumi:"ifname"`
	PreferredCarrier *string                    `pulumi:"preferredCarrier"`
	RedundantIntf    *string                    `pulumi:"redundantIntf"`
	RedundantMode    *string                    `pulumi:"redundantMode"`
	Sim1Pin          *string                    `pulumi:"sim1Pin"`
	Sim1PinCode      *string                    `pulumi:"sim1PinCode"`
	Sim2Pin          *string                    `pulumi:"sim2Pin"`
	Sim2PinCode      *string                    `pulumi:"sim2PinCode"`
}

type Extender1Modem2Args 

type Extender1Modem2Args struct {
	AutoSwitch       Extender1Modem2AutoSwitchPtrInput `pulumi:"autoSwitch"`
	ConnStatus       pulumi.IntPtrInput                `pulumi:"connStatus"`
	DefaultSim       pulumi.StringPtrInput             `pulumi:"defaultSim"`
	Gps              pulumi.StringPtrInput             `pulumi:"gps"`
	Ifname           pulumi.StringPtrInput             `pulumi:"ifname"`
	PreferredCarrier pulumi.StringPtrInput             `pulumi:"preferredCarrier"`
	RedundantIntf    pulumi.StringPtrInput             `pulumi:"redundantIntf"`
	RedundantMode    pulumi.StringPtrInput             `pulumi:"redundantMode"`
	Sim1Pin          pulumi.StringPtrInput             `pulumi:"sim1Pin"`
	Sim1PinCode      pulumi.StringPtrInput             `pulumi:"sim1PinCode"`
	Sim2Pin          pulumi.StringPtrInput             `pulumi:"sim2Pin"`
	Sim2PinCode      pulumi.StringPtrInput             `pulumi:"sim2PinCode"`
}

func (Extender1Modem2Args) ElementType 

func (Extender1Modem2Args) ElementType() reflect.Type

func (Extender1Modem2Args) ToExtender1Modem2Output 

func (i Extender1Modem2Args) ToExtender1Modem2Output() Extender1Modem2Output

func (Extender1Modem2Args) ToExtender1Modem2OutputWithContext 

func (i Extender1Modem2Args) ToExtender1Modem2OutputWithContext(ctx context.Context) Extender1Modem2Output

func (Extender1Modem2Args) ToExtender1Modem2PtrOutput 

func (i Extender1Modem2Args) ToExtender1Modem2PtrOutput() Extender1Modem2PtrOutput

func (Extender1Modem2Args) ToExtender1Modem2PtrOutputWithContext 

func (i Extender1Modem2Args) ToExtender1Modem2PtrOutputWithContext(ctx context.Context) Extender1Modem2PtrOutput

type Extender1Modem2AutoSwitch 

type Extender1Modem2AutoSwitch struct {
	// Automatically switch based on data usage. Valid values: `disable`, `enable`.
	Dataplan *string `pulumi:"dataplan"`
	// Auto switch by disconnect. Valid values: `disable`, `enable`.
	Disconnect *string `pulumi:"disconnect"`
	// Automatically switch based on disconnect period.
	DisconnectPeriod *int `pulumi:"disconnectPeriod"`
	// Automatically switch based on disconnect threshold.
	DisconnectThreshold *int `pulumi:"disconnectThreshold"`
	// Automatically switch based on signal strength. Valid values: `disable`, `enable`.
	Signal *string `pulumi:"signal"`
	// Auto switch with switch back multi-options. Valid values: `time`, `timer`.
	SwitchBack *string `pulumi:"switchBack"`
	// Automatically switch over to preferred SIM/carrier at a specified time in UTC (HH:MM).
	SwitchBackTime *string `pulumi:"switchBackTime"`
	// Automatically switch over to preferred SIM/carrier after the given time (3600 - 2147483647 sec).
	SwitchBackTimer *int `pulumi:"switchBackTimer"`
}

type Extender1Modem2AutoSwitchArgs 

type Extender1Modem2AutoSwitchArgs struct {
	// Automatically switch based on data usage. Valid values: `disable`, `enable`.
	Dataplan pulumi.StringPtrInput `pulumi:"dataplan"`
	// Auto switch by disconnect. Valid values: `disable`, `enable`.
	Disconnect pulumi.StringPtrInput `pulumi:"disconnect"`
	// Automatically switch based on disconnect period.
	DisconnectPeriod pulumi.IntPtrInput `pulumi:"disconnectPeriod"`
	// Automatically switch based on disconnect threshold.
	DisconnectThreshold pulumi.IntPtrInput `pulumi:"disconnectThreshold"`
	// Automatically switch based on signal strength. Valid values: `disable`, `enable`.
	Signal pulumi.StringPtrInput `pulumi:"signal"`
	// Auto switch with switch back multi-options. Valid values: `time`, `timer`.
	SwitchBack pulumi.StringPtrInput `pulumi:"switchBack"`
	// Automatically switch over to preferred SIM/carrier at a specified time in UTC (HH:MM).
	SwitchBackTime pulumi.StringPtrInput `pulumi:"switchBackTime"`
	// Automatically switch over to preferred SIM/carrier after the given time (3600 - 2147483647 sec).
	SwitchBackTimer pulumi.IntPtrInput `pulumi:"switchBackTimer"`
}

func (Extender1Modem2AutoSwitchArgs) ElementType 

func (Extender1Modem2AutoSwitchArgs) ElementType() reflect.Type

func (Extender1Modem2AutoSwitchArgs) ToExtender1Modem2AutoSwitchOutput 

func (i Extender1Modem2AutoSwitchArgs) ToExtender1Modem2AutoSwitchOutput() Extender1Modem2AutoSwitchOutput

func (Extender1Modem2AutoSwitchArgs) ToExtender1Modem2AutoSwitchOutputWithContext 

func (i Extender1Modem2AutoSwitchArgs) ToExtender1Modem2AutoSwitchOutputWithContext(ctx context.Context) Extender1Modem2AutoSwitchOutput

func (Extender1Modem2AutoSwitchArgs) ToExtender1Modem2AutoSwitchPtrOutput 

func (i Extender1Modem2AutoSwitchArgs) ToExtender1Modem2AutoSwitchPtrOutput() Extender1Modem2AutoSwitchPtrOutput

func (Extender1Modem2AutoSwitchArgs) ToExtender1Modem2AutoSwitchPtrOutputWithContext 

func (i Extender1Modem2AutoSwitchArgs) ToExtender1Modem2AutoSwitchPtrOutputWithContext(ctx context.Context) Extender1Modem2AutoSwitchPtrOutput

type Extender1Modem2AutoSwitchInput 

type Extender1Modem2AutoSwitchInput interface {
	pulumi.Input

	ToExtender1Modem2AutoSwitchOutput() Extender1Modem2AutoSwitchOutput
	ToExtender1Modem2AutoSwitchOutputWithContext(context.Context) Extender1Modem2AutoSwitchOutput
}

Extender1Modem2AutoSwitchInput is an input type that accepts Extender1Modem2AutoSwitchArgs and Extender1Modem2AutoSwitchOutput values. You can construct a concrete instance of `Extender1Modem2AutoSwitchInput` via: 

Extender1Modem2AutoSwitchArgs{...}

type Extender1Modem2AutoSwitchOutput 

type Extender1Modem2AutoSwitchOutput struct{ *pulumi.OutputState }

func (Extender1Modem2AutoSwitchOutput) Dataplan 

func (o Extender1Modem2AutoSwitchOutput) Dataplan() pulumi.StringPtrOutput

Automatically switch based on data usage. Valid values: `disable`, `enable`.

func (Extender1Modem2AutoSwitchOutput) Disconnect 

func (o Extender1Modem2AutoSwitchOutput) Disconnect() pulumi.StringPtrOutput

Auto switch by disconnect. Valid values: `disable`, `enable`.

func (Extender1Modem2AutoSwitchOutput) DisconnectPeriod 

func (o Extender1Modem2AutoSwitchOutput) DisconnectPeriod() pulumi.IntPtrOutput

Automatically switch based on disconnect period.

func (Extender1Modem2AutoSwitchOutput) DisconnectThreshold 

func (o Extender1Modem2AutoSwitchOutput) DisconnectThreshold() pulumi.IntPtrOutput

Automatically switch based on disconnect threshold.

func (Extender1Modem2AutoSwitchOutput) ElementType 

func (Extender1Modem2AutoSwitchOutput) ElementType() reflect.Type

func (Extender1Modem2AutoSwitchOutput) Signal 

func (o Extender1Modem2AutoSwitchOutput) Signal() pulumi.StringPtrOutput

Automatically switch based on signal strength. Valid values: `disable`, `enable`.

func (Extender1Modem2AutoSwitchOutput) SwitchBack 

func (o Extender1Modem2AutoSwitchOutput) SwitchBack() pulumi.StringPtrOutput

Auto switch with switch back multi-options. Valid values: `time`, `timer`.

func (Extender1Modem2AutoSwitchOutput) SwitchBackTime 

func (o Extender1Modem2AutoSwitchOutput) SwitchBackTime() pulumi.StringPtrOutput

Automatically switch over to preferred SIM/carrier at a specified time in UTC (HH:MM).

func (Extender1Modem2AutoSwitchOutput) SwitchBackTimer 

func (o Extender1Modem2AutoSwitchOutput) SwitchBackTimer() pulumi.IntPtrOutput

Automatically switch over to preferred SIM/carrier after the given time (3600 - 2147483647 sec).

func (Extender1Modem2AutoSwitchOutput) ToExtender1Modem2AutoSwitchOutput 

func (o Extender1Modem2AutoSwitchOutput) ToExtender1Modem2AutoSwitchOutput() Extender1Modem2AutoSwitchOutput

func (Extender1Modem2AutoSwitchOutput) ToExtender1Modem2AutoSwitchOutputWithContext 

func (o Extender1Modem2AutoSwitchOutput) ToExtender1Modem2AutoSwitchOutputWithContext(ctx context.Context) Extender1Modem2AutoSwitchOutput

func (Extender1Modem2AutoSwitchOutput) ToExtender1Modem2AutoSwitchPtrOutput 

func (o Extender1Modem2AutoSwitchOutput) ToExtender1Modem2AutoSwitchPtrOutput() Extender1Modem2AutoSwitchPtrOutput

func (Extender1Modem2AutoSwitchOutput) ToExtender1Modem2AutoSwitchPtrOutputWithContext 

func (o Extender1Modem2AutoSwitchOutput) ToExtender1Modem2AutoSwitchPtrOutputWithContext(ctx context.Context) Extender1Modem2AutoSwitchPtrOutput

type Extender1Modem2AutoSwitchPtrInput 

type Extender1Modem2AutoSwitchPtrInput interface {
	pulumi.Input

	ToExtender1Modem2AutoSwitchPtrOutput() Extender1Modem2AutoSwitchPtrOutput
	ToExtender1Modem2AutoSwitchPtrOutputWithContext(context.Context) Extender1Modem2AutoSwitchPtrOutput
}

Extender1Modem2AutoSwitchPtrInput is an input type that accepts Extender1Modem2AutoSwitchArgs, Extender1Modem2AutoSwitchPtr and Extender1Modem2AutoSwitchPtrOutput values. You can construct a concrete instance of `Extender1Modem2AutoSwitchPtrInput` via: 

        Extender1Modem2AutoSwitchArgs{...}

or:

        nil

func Extender1Modem2AutoSwitchPtr 

func Extender1Modem2AutoSwitchPtr(v *Extender1Modem2AutoSwitchArgs) Extender1Modem2AutoSwitchPtrInput

type Extender1Modem2AutoSwitchPtrOutput 

type Extender1Modem2AutoSwitchPtrOutput struct{ *pulumi.OutputState }

func (Extender1Modem2AutoSwitchPtrOutput) Dataplan 

func (o Extender1Modem2AutoSwitchPtrOutput) Dataplan() pulumi.StringPtrOutput

Automatically switch based on data usage. Valid values: `disable`, `enable`.

func (Extender1Modem2AutoSwitchPtrOutput) Disconnect 

func (o Extender1Modem2AutoSwitchPtrOutput) Disconnect() pulumi.StringPtrOutput

Auto switch by disconnect. Valid values: `disable`, `enable`.

func (Extender1Modem2AutoSwitchPtrOutput) DisconnectPeriod 

func (o Extender1Modem2AutoSwitchPtrOutput) DisconnectPeriod() pulumi.IntPtrOutput

Automatically switch based on disconnect period.

func (Extender1Modem2AutoSwitchPtrOutput) DisconnectThreshold 

func (o Extender1Modem2AutoSwitchPtrOutput) DisconnectThreshold() pulumi.IntPtrOutput

Automatically switch based on disconnect threshold.

func (Extender1Modem2AutoSwitchPtrOutput) Elem 

func (o Extender1Modem2AutoSwitchPtrOutput) Elem() Extender1Modem2AutoSwitchOutput

func (Extender1Modem2AutoSwitchPtrOutput) ElementType 

func (Extender1Modem2AutoSwitchPtrOutput) ElementType() reflect.Type

func (Extender1Modem2AutoSwitchPtrOutput) Signal 

func (o Extender1Modem2AutoSwitchPtrOutput) Signal() pulumi.StringPtrOutput

Automatically switch based on signal strength. Valid values: `disable`, `enable`.

func (Extender1Modem2AutoSwitchPtrOutput) SwitchBack 

func (o Extender1Modem2AutoSwitchPtrOutput) SwitchBack() pulumi.StringPtrOutput

Auto switch with switch back multi-options. Valid values: `time`, `timer`.

func (Extender1Modem2AutoSwitchPtrOutput) SwitchBackTime 

func (o Extender1Modem2AutoSwitchPtrOutput) SwitchBackTime() pulumi.StringPtrOutput

Automatically switch over to preferred SIM/carrier at a specified time in UTC (HH:MM).

func (Extender1Modem2AutoSwitchPtrOutput) SwitchBackTimer 

func (o Extender1Modem2AutoSwitchPtrOutput) SwitchBackTimer() pulumi.IntPtrOutput

Automatically switch over to preferred SIM/carrier after the given time (3600 - 2147483647 sec).

func (Extender1Modem2AutoSwitchPtrOutput) ToExtender1Modem2AutoSwitchPtrOutput 

func (o Extender1Modem2AutoSwitchPtrOutput) ToExtender1Modem2AutoSwitchPtrOutput() Extender1Modem2AutoSwitchPtrOutput

func (Extender1Modem2AutoSwitchPtrOutput) ToExtender1Modem2AutoSwitchPtrOutputWithContext 

func (o Extender1Modem2AutoSwitchPtrOutput) ToExtender1Modem2AutoSwitchPtrOutputWithContext(ctx context.Context) Extender1Modem2AutoSwitchPtrOutput

type Extender1Modem2Input 

type Extender1Modem2Input interface {
	pulumi.Input

	ToExtender1Modem2Output() Extender1Modem2Output
	ToExtender1Modem2OutputWithContext(context.Context) Extender1Modem2Output
}

Extender1Modem2Input is an input type that accepts Extender1Modem2Args and Extender1Modem2Output values. You can construct a concrete instance of `Extender1Modem2Input` via: 

Extender1Modem2Args{...}

type Extender1Modem2Output 

type Extender1Modem2Output struct{ *pulumi.OutputState }

func (Extender1Modem2Output) AutoSwitch 

func (o Extender1Modem2Output) AutoSwitch() Extender1Modem2AutoSwitchPtrOutput

func (Extender1Modem2Output) ConnStatus 

func (o Extender1Modem2Output) ConnStatus() pulumi.IntPtrOutput

func (Extender1Modem2Output) DefaultSim 

func (o Extender1Modem2Output) DefaultSim() pulumi.StringPtrOutput

func (Extender1Modem2Output) ElementType 

func (Extender1Modem2Output) ElementType() reflect.Type

func (Extender1Modem2Output) Gps 

func (o Extender1Modem2Output) Gps() pulumi.StringPtrOutput

func (Extender1Modem2Output) Ifname 

func (o Extender1Modem2Output) Ifname() pulumi.StringPtrOutput

func (Extender1Modem2Output) PreferredCarrier 

func (o Extender1Modem2Output) PreferredCarrier() pulumi.StringPtrOutput

func (Extender1Modem2Output) RedundantIntf 

func (o Extender1Modem2Output) RedundantIntf() pulumi.StringPtrOutput

func (Extender1Modem2Output) RedundantMode 

func (o Extender1Modem2Output) RedundantMode() pulumi.StringPtrOutput

func (Extender1Modem2Output) Sim1Pin 

func (o Extender1Modem2Output) Sim1Pin() pulumi.StringPtrOutput

func (Extender1Modem2Output) Sim1PinCode 

func (o Extender1Modem2Output) Sim1PinCode() pulumi.StringPtrOutput

func (Extender1Modem2Output) Sim2Pin 

func (o Extender1Modem2Output) Sim2Pin() pulumi.StringPtrOutput

func (Extender1Modem2Output) Sim2PinCode 

func (o Extender1Modem2Output) Sim2PinCode() pulumi.StringPtrOutput

func (Extender1Modem2Output) ToExtender1Modem2Output 

func (o Extender1Modem2Output) ToExtender1Modem2Output() Extender1Modem2Output

func (Extender1Modem2Output) ToExtender1Modem2OutputWithContext 

func (o Extender1Modem2Output) ToExtender1Modem2OutputWithContext(ctx context.Context) Extender1Modem2Output

func (Extender1Modem2Output) ToExtender1Modem2PtrOutput 

func (o Extender1Modem2Output) ToExtender1Modem2PtrOutput() Extender1Modem2PtrOutput

func (Extender1Modem2Output) ToExtender1Modem2PtrOutputWithContext 

func (o Extender1Modem2Output) ToExtender1Modem2PtrOutputWithContext(ctx context.Context) Extender1Modem2PtrOutput

type Extender1Modem2PtrInput 

type Extender1Modem2PtrInput interface {
	pulumi.Input

	ToExtender1Modem2PtrOutput() Extender1Modem2PtrOutput
	ToExtender1Modem2PtrOutputWithContext(context.Context) Extender1Modem2PtrOutput
}

Extender1Modem2PtrInput is an input type that accepts Extender1Modem2Args, Extender1Modem2Ptr and Extender1Modem2PtrOutput values. You can construct a concrete instance of `Extender1Modem2PtrInput` via: 

        Extender1Modem2Args{...}

or:

        nil

func Extender1Modem2Ptr 

func Extender1Modem2Ptr(v *Extender1Modem2Args) Extender1Modem2PtrInput

type Extender1Modem2PtrOutput 

type Extender1Modem2PtrOutput struct{ *pulumi.OutputState }

func (Extender1Modem2PtrOutput) AutoSwitch 

func (o Extender1Modem2PtrOutput) AutoSwitch() Extender1Modem2AutoSwitchPtrOutput

func (Extender1Modem2PtrOutput) ConnStatus 

func (o Extender1Modem2PtrOutput) ConnStatus() pulumi.IntPtrOutput

func (Extender1Modem2PtrOutput) DefaultSim 

func (o Extender1Modem2PtrOutput) DefaultSim() pulumi.StringPtrOutput

func (Extender1Modem2PtrOutput) Elem 

func (o Extender1Modem2PtrOutput) Elem() Extender1Modem2Output

func (Extender1Modem2PtrOutput) ElementType 

func (Extender1Modem2PtrOutput) ElementType() reflect.Type

func (Extender1Modem2PtrOutput) Gps 

func (o Extender1Modem2PtrOutput) Gps() pulumi.StringPtrOutput

func (Extender1Modem2PtrOutput) Ifname 

func (o Extender1Modem2PtrOutput) Ifname() pulumi.StringPtrOutput

func (Extender1Modem2PtrOutput) PreferredCarrier 

func (o Extender1Modem2PtrOutput) PreferredCarrier() pulumi.StringPtrOutput

func (Extender1Modem2PtrOutput) RedundantIntf 

func (o Extender1Modem2PtrOutput) RedundantIntf() pulumi.StringPtrOutput

func (Extender1Modem2PtrOutput) RedundantMode 

func (o Extender1Modem2PtrOutput) RedundantMode() pulumi.StringPtrOutput

func (Extender1Modem2PtrOutput) Sim1Pin 

func (o Extender1Modem2PtrOutput) Sim1Pin() pulumi.StringPtrOutput

func (Extender1Modem2PtrOutput) Sim1PinCode 

func (o Extender1Modem2PtrOutput) Sim1PinCode() pulumi.StringPtrOutput

func (Extender1Modem2PtrOutput) Sim2Pin 

func (o Extender1Modem2PtrOutput) Sim2Pin() pulumi.StringPtrOutput

func (Extender1Modem2PtrOutput) Sim2PinCode 

func (o Extender1Modem2PtrOutput) Sim2PinCode() pulumi.StringPtrOutput

func (Extender1Modem2PtrOutput) ToExtender1Modem2PtrOutput 

func (o Extender1Modem2PtrOutput) ToExtender1Modem2PtrOutput() Extender1Modem2PtrOutput

func (Extender1Modem2PtrOutput) ToExtender1Modem2PtrOutputWithContext 

func (o Extender1Modem2PtrOutput) ToExtender1Modem2PtrOutputWithContext(ctx context.Context) Extender1Modem2PtrOutput

type Extender1Output 

type Extender1Output struct{ *pulumi.OutputState }

func (Extender1Output) Authorized 

func (o Extender1Output) Authorized() pulumi.StringOutput

FortiExtender Administration (enable or disable). Valid values: `disable`, `enable`.

func (Extender1Output) ControllerReport 

func (o Extender1Output) ControllerReport() Extender1ControllerReportOutput

FortiExtender controller report configuration. The structure of `controllerReport` block is documented below.

func (Extender1Output) Description 

func (o Extender1Output) Description() pulumi.StringOutput

Description.

func (Extender1Output) ElementType 

func (Extender1Output) ElementType() reflect.Type

func (Extender1Output) ExtName 

func (o Extender1Output) ExtName() pulumi.StringOutput

FortiExtender name.

func (Extender1Output) Fosid 

func (o Extender1Output) Fosid() pulumi.StringOutput

FortiExtender serial number.

func (Extender1Output) GetAllTables 

func (o Extender1Output) GetAllTables() pulumi.StringPtrOutput

Get all sub-tables including unconfigured tables. Do not set this variable to true if you configure sub-table in another resource, otherwise, conflicts and overwrite will occur. Options: [ false, true ]. false: Default value, do not get unconfigured tables; true: get all tables including unconfigured tables.

func (Extender1Output) LoginPassword 

func (o Extender1Output) LoginPassword() pulumi.StringPtrOutput

FortiExtender login password.

func (Extender1Output) Modem1 

func (o Extender1Output) Modem1() Extender1Modem1Output

Configuration options for modem 1. The structure of `modem1` block is documented below.

func (Extender1Output) Modem2 

func (o Extender1Output) Modem2() Extender1Modem2Output

Configuration options for modem 2. The structure of `modem2` block is documented below.

func (Extender1Output) Name 

func (o Extender1Output) Name() pulumi.StringOutput

FortiExtender entry name.

func (Extender1Output) ToExtender1Output 

func (o Extender1Output) ToExtender1Output() Extender1Output

func (Extender1Output) ToExtender1OutputWithContext 

func (o Extender1Output) ToExtender1OutputWithContext(ctx context.Context) Extender1Output

func (Extender1Output) Vdom 

func (o Extender1Output) Vdom() pulumi.IntOutput

VDOM

func (Extender1Output) Vdomparam 

func (o Extender1Output) Vdomparam() pulumi.StringOutput

Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.

type Extender1State 

type Extender1State struct {
	// FortiExtender Administration (enable or disable). Valid values: `disable`, `enable`.
	Authorized pulumi.StringPtrInput
	// FortiExtender controller report configuration. The structure of `controllerReport` block is documented below.
	ControllerReport Extender1ControllerReportPtrInput
	// Description.
	Description pulumi.StringPtrInput
	// FortiExtender name.
	ExtName pulumi.StringPtrInput
	// FortiExtender serial number.
	Fosid pulumi.StringPtrInput
	// Get all sub-tables including unconfigured tables. Do not set this variable to true if you configure sub-table in another resource, otherwise, conflicts and overwrite will occur. Options: [ false, true ]. false: Default value, do not get unconfigured tables; true: get all tables including unconfigured tables.
	GetAllTables pulumi.StringPtrInput
	// FortiExtender login password.
	LoginPassword pulumi.StringPtrInput
	// Configuration options for modem 1. The structure of `modem1` block is documented below.
	Modem1 Extender1Modem1PtrInput
	// Configuration options for modem 2. The structure of `modem2` block is documented below.
	Modem2 Extender1Modem2PtrInput
	// FortiExtender entry name.
	Name pulumi.StringPtrInput
	// VDOM
	Vdom pulumi.IntPtrInput
	// Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
	Vdomparam pulumi.StringPtrInput
}

func (Extender1State) ElementType 

func (Extender1State) ElementType() reflect.Type

type ExtenderArgs 

type ExtenderArgs struct {
	// AAA shared secret.
	AaaSharedSecret pulumi.StringPtrInput
	// Access point name(APN).
	AccessPointName pulumi.StringPtrInput
	// FortiExtender Administration (enable or disable). Valid values: `disable`, `discovered`, `enable`.
	Admin pulumi.StringInput
	// Control management access to the managed extender. Separate entries with a space. Valid values: `ping`, `telnet`, `http`, `https`, `ssh`, `snmp`.
	Allowaccess pulumi.StringPtrInput
	// Initialization AT commands specific to the MODEM.
	AtDialScript pulumi.StringPtrInput
	// FortiExtender Administration (enable or disable). Valid values: `disable`, `enable`.
	Authorized pulumi.StringPtrInput
	// FortiExtender LAN extension bandwidth limit (Mbps).
	BandwidthLimit pulumi.IntPtrInput
	// Billing start day.
	BillingStartDay pulumi.IntPtrInput
	// CDMA AAA SPI.
	CdmaAaaSpi pulumi.StringPtrInput
	// CDMA HA SPI.
	CdmaHaSpi pulumi.StringPtrInput
	// NAI for CDMA MODEMS.
	CdmaNai pulumi.StringPtrInput
	// Connection status.
	ConnStatus pulumi.IntPtrInput
	// FortiExtender controller report configuration. The structure of `controllerReport` block is documented below.
	ControllerReport ExtenderControllerReportPtrInput
	// Description.
	Description pulumi.StringPtrInput
	// device-id
	DeviceId pulumi.IntPtrInput
	// Dial mode (dial-on-demand or always-connect). Valid values: `dial-on-demand`, `always-connect`.
	DialMode pulumi.StringPtrInput
	// Dial status.
	DialStatus pulumi.IntPtrInput
	// Enable/disable enforcement of bandwidth on LAN extension interface. Valid values: `enable`, `disable`.
	EnforceBandwidth pulumi.StringPtrInput
	// FortiExtender name.
	ExtName pulumi.StringPtrInput
	// Extension type for this FortiExtender. Valid values: `wan-extension`, `lan-extension`.
	ExtensionType pulumi.StringPtrInput
	// FortiExtender serial number.
	Fosid pulumi.StringInput
	// Get all sub-tables including unconfigured tables. Do not set this variable to true if you configure sub-table in another resource, otherwise, conflicts and overwrite will occur. Options: [ false, true ]. false: Default value, do not get unconfigured tables; true: get all tables including unconfigured tables.
	GetAllTables pulumi.StringPtrInput
	// HA shared secret.
	HaSharedSecret pulumi.StringPtrInput
	// FortiExtender interface name.
	Ifname pulumi.StringPtrInput
	// Allow/disallow network initiated updates to the MODEM. Valid values: `enable`, `disable`.
	InitiatedUpdate pulumi.StringPtrInput
	// FortiExtender login password.
	LoginPassword pulumi.StringPtrInput
	// Change or reset the administrator password of a managed extender (yes, default, or no, default = no). Valid values: `yes`, `default`, `no`.
	LoginPasswordChange pulumi.StringPtrInput
	// FortiExtender mode. Valid values: `standalone`, `redundant`.
	Mode pulumi.StringPtrInput
	// Configuration options for modem 1. The structure of `modem1` block is documented below.
	Modem1 ExtenderModem1PtrInput
	// Configuration options for modem 2. The structure of `modem2` block is documented below.
	Modem2 ExtenderModem2PtrInput
	// MODEM password.
	ModemPasswd pulumi.StringPtrInput
	// MODEM type (CDMA, GSM/LTE or WIMAX). Valid values: `cdma`, `gsm/lte`, `wimax`.
	ModemType pulumi.StringPtrInput
	// MODEM mode of operation(3G,LTE,etc). Valid values: `auto`, `auto-3g`, `force-lte`, `force-3g`, `force-2g`.
	MultiMode pulumi.StringPtrInput
	// FortiExtender entry name.
	Name pulumi.StringPtrInput
	// Enable to override the extender profile management access configuration. Valid values: `enable`, `disable`.
	OverrideAllowaccess pulumi.StringPtrInput
	// Enable to override the extender profile enforce-bandwidth setting. Valid values: `enable`, `disable`.
	OverrideEnforceBandwidth pulumi.StringPtrInput
	// Enable to override the extender profile login-password (administrator password) setting. Valid values: `enable`, `disable`.
	OverrideLoginPasswordChange pulumi.StringPtrInput
	// PPP authentication protocol (PAP,CHAP or auto). Valid values: `auto`, `pap`, `chap`.
	PppAuthProtocol pulumi.StringPtrInput
	// Enable/disable PPP echo request. Valid values: `enable`, `disable`.
	PppEchoRequest pulumi.StringPtrInput
	// PPP password.
	PppPassword pulumi.StringPtrInput
	// PPP username.
	PppUsername pulumi.StringPtrInput
	// Primary HA.
	PrimaryHa pulumi.StringPtrInput
	// FortiExtender profile configuration.
	Profile pulumi.StringPtrInput
	// Monthly quota limit (MB).
	QuotaLimitMb pulumi.IntPtrInput
	// Number of redials allowed based on failed attempts. Valid values: `none`, `1`, `2`, `3`, `4`, `5`, `6`, `7`, `8`, `9`, `10`.
	Redial pulumi.StringPtrInput
	// Redundant interface.
	RedundantIntf pulumi.StringPtrInput
	// Enable/disable MODEM roaming. Valid values: `enable`, `disable`.
	Roaming pulumi.StringPtrInput
	// FortiExtender work role(Primary, Secondary, None). Valid values: `none`, `primary`, `secondary`.
	Role pulumi.StringInput
	// Secondary HA.
	SecondaryHa pulumi.StringPtrInput
	// SIM PIN.
	SimPin pulumi.StringPtrInput
	// VDOM
	Vdom pulumi.IntPtrInput
	// Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
	Vdomparam pulumi.StringPtrInput
	// FortiExtender wan extension configuration. The structure of `wanExtension` block is documented below.
	WanExtension ExtenderWanExtensionPtrInput
	// WiMax authentication protocol(TLS or TTLS). Valid values: `tls`, `ttls`.
	WimaxAuthProtocol pulumi.StringPtrInput
	// WiMax carrier.
	WimaxCarrier pulumi.StringPtrInput
	// WiMax realm.
	WimaxRealm pulumi.StringPtrInput
}

The set of arguments for constructing a Extender resource.

func (ExtenderArgs) ElementType 

func (ExtenderArgs) ElementType() reflect.Type

type ExtenderArray 

type ExtenderArray []ExtenderInput

func (ExtenderArray) ElementType 

func (ExtenderArray) ElementType() reflect.Type

func (ExtenderArray) ToExtenderArrayOutput 

func (i ExtenderArray) ToExtenderArrayOutput() ExtenderArrayOutput

func (ExtenderArray) ToExtenderArrayOutputWithContext 

func (i ExtenderArray) ToExtenderArrayOutputWithContext(ctx context.Context) ExtenderArrayOutput

type ExtenderArrayInput 

type ExtenderArrayInput interface {
	pulumi.Input

	ToExtenderArrayOutput() ExtenderArrayOutput
	ToExtenderArrayOutputWithContext(context.Context) ExtenderArrayOutput
}

ExtenderArrayInput is an input type that accepts ExtenderArray and ExtenderArrayOutput values. You can construct a concrete instance of `ExtenderArrayInput` via: 

ExtenderArray{ ExtenderArgs{...} }

type ExtenderArrayOutput 

type ExtenderArrayOutput struct{ *pulumi.OutputState }

func (ExtenderArrayOutput) ElementType 

func (ExtenderArrayOutput) ElementType() reflect.Type

func (ExtenderArrayOutput) Index 

func (o ExtenderArrayOutput) Index(i pulumi.IntInput) ExtenderOutput

func (ExtenderArrayOutput) ToExtenderArrayOutput 

func (o ExtenderArrayOutput) ToExtenderArrayOutput() ExtenderArrayOutput

func (ExtenderArrayOutput) ToExtenderArrayOutputWithContext 

func (o ExtenderArrayOutput) ToExtenderArrayOutputWithContext(ctx context.Context) ExtenderArrayOutput

type ExtenderControllerReport 

type ExtenderControllerReport struct {
	// Controller report interval.
	Interval *int `pulumi:"interval"`
	// Controller report signal threshold.
	//
	// The `modem1` block supports:
	SignalThreshold *int `pulumi:"signalThreshold"`
	// FortiExtender controller report status. Valid values: `disable`, `enable`.
	Status *string `pulumi:"status"`
}

type ExtenderControllerReportArgs 

type ExtenderControllerReportArgs struct {
	// Controller report interval.
	Interval pulumi.IntPtrInput `pulumi:"interval"`
	// Controller report signal threshold.
	//
	// The `modem1` block supports:
	SignalThreshold pulumi.IntPtrInput `pulumi:"signalThreshold"`
	// FortiExtender controller report status. Valid values: `disable`, `enable`.
	Status pulumi.StringPtrInput `pulumi:"status"`
}

func (ExtenderControllerReportArgs) ElementType 

func (ExtenderControllerReportArgs) ElementType() reflect.Type

func (ExtenderControllerReportArgs) ToExtenderControllerReportOutput 

func (i ExtenderControllerReportArgs) ToExtenderControllerReportOutput() ExtenderControllerReportOutput

func (ExtenderControllerReportArgs) ToExtenderControllerReportOutputWithContext 

func (i ExtenderControllerReportArgs) ToExtenderControllerReportOutputWithContext(ctx context.Context) ExtenderControllerReportOutput

func (ExtenderControllerReportArgs) ToExtenderControllerReportPtrOutput 

func (i ExtenderControllerReportArgs) ToExtenderControllerReportPtrOutput() ExtenderControllerReportPtrOutput

func (ExtenderControllerReportArgs) ToExtenderControllerReportPtrOutputWithContext 

func (i ExtenderControllerReportArgs) ToExtenderControllerReportPtrOutputWithContext(ctx context.Context) ExtenderControllerReportPtrOutput

type ExtenderControllerReportInput 

type ExtenderControllerReportInput interface {
	pulumi.Input

	ToExtenderControllerReportOutput() ExtenderControllerReportOutput
	ToExtenderControllerReportOutputWithContext(context.Context) ExtenderControllerReportOutput
}

ExtenderControllerReportInput is an input type that accepts ExtenderControllerReportArgs and ExtenderControllerReportOutput values. You can construct a concrete instance of `ExtenderControllerReportInput` via: 

ExtenderControllerReportArgs{...}

type ExtenderControllerReportOutput 

type ExtenderControllerReportOutput struct{ *pulumi.OutputState }

func (ExtenderControllerReportOutput) ElementType 

func (ExtenderControllerReportOutput) ElementType() reflect.Type

func (ExtenderControllerReportOutput) Interval 

func (o ExtenderControllerReportOutput) Interval() pulumi.IntPtrOutput

Controller report interval.

func (ExtenderControllerReportOutput) SignalThreshold 

func (o ExtenderControllerReportOutput) SignalThreshold() pulumi.IntPtrOutput

Controller report signal threshold.

The `modem1` block supports:

func (ExtenderControllerReportOutput) Status 

func (o ExtenderControllerReportOutput) Status() pulumi.StringPtrOutput

FortiExtender controller report status. Valid values: `disable`, `enable`.

func (ExtenderControllerReportOutput) ToExtenderControllerReportOutput 

func (o ExtenderControllerReportOutput) ToExtenderControllerReportOutput() ExtenderControllerReportOutput

func (ExtenderControllerReportOutput) ToExtenderControllerReportOutputWithContext 

func (o ExtenderControllerReportOutput) ToExtenderControllerReportOutputWithContext(ctx context.Context) ExtenderControllerReportOutput

func (ExtenderControllerReportOutput) ToExtenderControllerReportPtrOutput 

func (o ExtenderControllerReportOutput) ToExtenderControllerReportPtrOutput() ExtenderControllerReportPtrOutput

func (ExtenderControllerReportOutput) ToExtenderControllerReportPtrOutputWithContext 

func (o ExtenderControllerReportOutput) ToExtenderControllerReportPtrOutputWithContext(ctx context.Context) ExtenderControllerReportPtrOutput

type ExtenderControllerReportPtrInput 

type ExtenderControllerReportPtrInput interface {
	pulumi.Input

	ToExtenderControllerReportPtrOutput() ExtenderControllerReportPtrOutput
	ToExtenderControllerReportPtrOutputWithContext(context.Context) ExtenderControllerReportPtrOutput
}

ExtenderControllerReportPtrInput is an input type that accepts ExtenderControllerReportArgs, ExtenderControllerReportPtr and ExtenderControllerReportPtrOutput values. You can construct a concrete instance of `ExtenderControllerReportPtrInput` via: 

        ExtenderControllerReportArgs{...}

or:

        nil

func ExtenderControllerReportPtr 

func ExtenderControllerReportPtr(v *ExtenderControllerReportArgs) ExtenderControllerReportPtrInput

type ExtenderControllerReportPtrOutput 

type ExtenderControllerReportPtrOutput struct{ *pulumi.OutputState }

func (ExtenderControllerReportPtrOutput) Elem 

func (o ExtenderControllerReportPtrOutput) Elem() ExtenderControllerReportOutput

func (ExtenderControllerReportPtrOutput) ElementType 

func (ExtenderControllerReportPtrOutput) ElementType() reflect.Type

func (ExtenderControllerReportPtrOutput) Interval 

func (o ExtenderControllerReportPtrOutput) Interval() pulumi.IntPtrOutput

Controller report interval.

func (ExtenderControllerReportPtrOutput) SignalThreshold 

func (o ExtenderControllerReportPtrOutput) SignalThreshold() pulumi.IntPtrOutput

Controller report signal threshold.

The `modem1` block supports:

func (ExtenderControllerReportPtrOutput) Status 

func (o ExtenderControllerReportPtrOutput) Status() pulumi.StringPtrOutput

FortiExtender controller report status. Valid values: `disable`, `enable`.

func (ExtenderControllerReportPtrOutput) ToExtenderControllerReportPtrOutput 

func (o ExtenderControllerReportPtrOutput) ToExtenderControllerReportPtrOutput() ExtenderControllerReportPtrOutput

func (ExtenderControllerReportPtrOutput) ToExtenderControllerReportPtrOutputWithContext 

func (o ExtenderControllerReportPtrOutput) ToExtenderControllerReportPtrOutputWithContext(ctx context.Context) ExtenderControllerReportPtrOutput

type ExtenderInput 

type ExtenderInput interface {
	pulumi.Input

	ToExtenderOutput() ExtenderOutput
	ToExtenderOutputWithContext(ctx context.Context) ExtenderOutput
}

type ExtenderMap 

type ExtenderMap map[string]ExtenderInput

func (ExtenderMap) ElementType 

func (ExtenderMap) ElementType() reflect.Type

func (ExtenderMap) ToExtenderMapOutput 

func (i ExtenderMap) ToExtenderMapOutput() ExtenderMapOutput

func (ExtenderMap) ToExtenderMapOutputWithContext 

func (i ExtenderMap) ToExtenderMapOutputWithContext(ctx context.Context) ExtenderMapOutput

type ExtenderMapInput 

type ExtenderMapInput interface {
	pulumi.Input

	ToExtenderMapOutput() ExtenderMapOutput
	ToExtenderMapOutputWithContext(context.Context) ExtenderMapOutput
}

ExtenderMapInput is an input type that accepts ExtenderMap and ExtenderMapOutput values. You can construct a concrete instance of `ExtenderMapInput` via: 

ExtenderMap{ "key": ExtenderArgs{...} }

type ExtenderMapOutput 

type ExtenderMapOutput struct{ *pulumi.OutputState }

func (ExtenderMapOutput) ElementType 

func (ExtenderMapOutput) ElementType() reflect.Type

func (ExtenderMapOutput) MapIndex 

func (o ExtenderMapOutput) MapIndex(k pulumi.StringInput) ExtenderOutput

func (ExtenderMapOutput) ToExtenderMapOutput 

func (o ExtenderMapOutput) ToExtenderMapOutput() ExtenderMapOutput

func (ExtenderMapOutput) ToExtenderMapOutputWithContext 

func (o ExtenderMapOutput) ToExtenderMapOutputWithContext(ctx context.Context) ExtenderMapOutput

type ExtenderModem1 

type ExtenderModem1 struct {
	AutoSwitch *ExtenderModem1AutoSwitch `pulumi:"autoSwitch"`
	// Connection status.
	ConnStatus *int    `pulumi:"connStatus"`
	DefaultSim *string `pulumi:"defaultSim"`
	Gps        *string `pulumi:"gps"`
	// FortiExtender interface name.
	Ifname           *string `pulumi:"ifname"`
	PreferredCarrier *string `pulumi:"preferredCarrier"`
	// Redundant interface.
	RedundantIntf *string `pulumi:"redundantIntf"`
	RedundantMode *string `pulumi:"redundantMode"`
	Sim1Pin       *string `pulumi:"sim1Pin"`
	Sim1PinCode   *string `pulumi:"sim1PinCode"`
	Sim2Pin       *string `pulumi:"sim2Pin"`
	Sim2PinCode   *string `pulumi:"sim2PinCode"`
}

type ExtenderModem1Args 

type ExtenderModem1Args struct {
	AutoSwitch ExtenderModem1AutoSwitchPtrInput `pulumi:"autoSwitch"`
	// Connection status.
	ConnStatus pulumi.IntPtrInput    `pulumi:"connStatus"`
	DefaultSim pulumi.StringPtrInput `pulumi:"defaultSim"`
	Gps        pulumi.StringPtrInput `pulumi:"gps"`
	// FortiExtender interface name.
	Ifname           pulumi.StringPtrInput `pulumi:"ifname"`
	PreferredCarrier pulumi.StringPtrInput `pulumi:"preferredCarrier"`
	// Redundant interface.
	RedundantIntf pulumi.StringPtrInput `pulumi:"redundantIntf"`
	RedundantMode pulumi.StringPtrInput `pulumi:"redundantMode"`
	Sim1Pin       pulumi.StringPtrInput `pulumi:"sim1Pin"`
	Sim1PinCode   pulumi.StringPtrInput `pulumi:"sim1PinCode"`
	Sim2Pin       pulumi.StringPtrInput `pulumi:"sim2Pin"`
	Sim2PinCode   pulumi.StringPtrInput `pulumi:"sim2PinCode"`
}

func (ExtenderModem1Args) ElementType 

func (ExtenderModem1Args) ElementType() reflect.Type

func (ExtenderModem1Args) ToExtenderModem1Output 

func (i ExtenderModem1Args) ToExtenderModem1Output() ExtenderModem1Output

func (ExtenderModem1Args) ToExtenderModem1OutputWithContext 

func (i ExtenderModem1Args) ToExtenderModem1OutputWithContext(ctx context.Context) ExtenderModem1Output

func (ExtenderModem1Args) ToExtenderModem1PtrOutput 

func (i ExtenderModem1Args) ToExtenderModem1PtrOutput() ExtenderModem1PtrOutput

func (ExtenderModem1Args) ToExtenderModem1PtrOutputWithContext 

func (i ExtenderModem1Args) ToExtenderModem1PtrOutputWithContext(ctx context.Context) ExtenderModem1PtrOutput

type ExtenderModem1AutoSwitch 

type ExtenderModem1AutoSwitch struct {
	// Automatically switch based on data usage. Valid values: `disable`, `enable`.
	Dataplan *string `pulumi:"dataplan"`
	// Auto switch by disconnect. Valid values: `disable`, `enable`.
	Disconnect *string `pulumi:"disconnect"`
	// Automatically switch based on disconnect period.
	DisconnectPeriod *int `pulumi:"disconnectPeriod"`
	// Automatically switch based on disconnect threshold.
	DisconnectThreshold *int `pulumi:"disconnectThreshold"`
	// Automatically switch based on signal strength. Valid values: `disable`, `enable`.
	Signal *string `pulumi:"signal"`
	// Auto switch with switch back multi-options. Valid values: `time`, `timer`.
	SwitchBack *string `pulumi:"switchBack"`
	// Automatically switch over to preferred SIM/carrier at a specified time in UTC (HH:MM).
	SwitchBackTime *string `pulumi:"switchBackTime"`
	// Automatically switch over to preferred SIM/carrier after the given time (3600 - 2147483647 sec).
	SwitchBackTimer *int `pulumi:"switchBackTimer"`
}

type ExtenderModem1AutoSwitchArgs 

type ExtenderModem1AutoSwitchArgs struct {
	// Automatically switch based on data usage. Valid values: `disable`, `enable`.
	Dataplan pulumi.StringPtrInput `pulumi:"dataplan"`
	// Auto switch by disconnect. Valid values: `disable`, `enable`.
	Disconnect pulumi.StringPtrInput `pulumi:"disconnect"`
	// Automatically switch based on disconnect period.
	DisconnectPeriod pulumi.IntPtrInput `pulumi:"disconnectPeriod"`
	// Automatically switch based on disconnect threshold.
	DisconnectThreshold pulumi.IntPtrInput `pulumi:"disconnectThreshold"`
	// Automatically switch based on signal strength. Valid values: `disable`, `enable`.
	Signal pulumi.StringPtrInput `pulumi:"signal"`
	// Auto switch with switch back multi-options. Valid values: `time`, `timer`.
	SwitchBack pulumi.StringPtrInput `pulumi:"switchBack"`
	// Automatically switch over to preferred SIM/carrier at a specified time in UTC (HH:MM).
	SwitchBackTime pulumi.StringPtrInput `pulumi:"switchBackTime"`
	// Automatically switch over to preferred SIM/carrier after the given time (3600 - 2147483647 sec).
	SwitchBackTimer pulumi.IntPtrInput `pulumi:"switchBackTimer"`
}

func (ExtenderModem1AutoSwitchArgs) ElementType 

func (ExtenderModem1AutoSwitchArgs) ElementType() reflect.Type

func (ExtenderModem1AutoSwitchArgs) ToExtenderModem1AutoSwitchOutput 

func (i ExtenderModem1AutoSwitchArgs) ToExtenderModem1AutoSwitchOutput() ExtenderModem1AutoSwitchOutput

func (ExtenderModem1AutoSwitchArgs) ToExtenderModem1AutoSwitchOutputWithContext 

func (i ExtenderModem1AutoSwitchArgs) ToExtenderModem1AutoSwitchOutputWithContext(ctx context.Context) ExtenderModem1AutoSwitchOutput

func (ExtenderModem1AutoSwitchArgs) ToExtenderModem1AutoSwitchPtrOutput 

func (i ExtenderModem1AutoSwitchArgs) ToExtenderModem1AutoSwitchPtrOutput() ExtenderModem1AutoSwitchPtrOutput

func (ExtenderModem1AutoSwitchArgs) ToExtenderModem1AutoSwitchPtrOutputWithContext 

func (i ExtenderModem1AutoSwitchArgs) ToExtenderModem1AutoSwitchPtrOutputWithContext(ctx context.Context) ExtenderModem1AutoSwitchPtrOutput

type ExtenderModem1AutoSwitchInput 

type ExtenderModem1AutoSwitchInput interface {
	pulumi.Input

	ToExtenderModem1AutoSwitchOutput() ExtenderModem1AutoSwitchOutput
	ToExtenderModem1AutoSwitchOutputWithContext(context.Context) ExtenderModem1AutoSwitchOutput
}

ExtenderModem1AutoSwitchInput is an input type that accepts ExtenderModem1AutoSwitchArgs and ExtenderModem1AutoSwitchOutput values. You can construct a concrete instance of `ExtenderModem1AutoSwitchInput` via: 

ExtenderModem1AutoSwitchArgs{...}

type ExtenderModem1AutoSwitchOutput 

type ExtenderModem1AutoSwitchOutput struct{ *pulumi.OutputState }

func (ExtenderModem1AutoSwitchOutput) Dataplan 

func (o ExtenderModem1AutoSwitchOutput) Dataplan() pulumi.StringPtrOutput

Automatically switch based on data usage. Valid values: `disable`, `enable`.

func (ExtenderModem1AutoSwitchOutput) Disconnect 

func (o ExtenderModem1AutoSwitchOutput) Disconnect() pulumi.StringPtrOutput

Auto switch by disconnect. Valid values: `disable`, `enable`.

func (ExtenderModem1AutoSwitchOutput) DisconnectPeriod 

func (o ExtenderModem1AutoSwitchOutput) DisconnectPeriod() pulumi.IntPtrOutput

Automatically switch based on disconnect period.

func (ExtenderModem1AutoSwitchOutput) DisconnectThreshold 

func (o ExtenderModem1AutoSwitchOutput) DisconnectThreshold() pulumi.IntPtrOutput

Automatically switch based on disconnect threshold.

func (ExtenderModem1AutoSwitchOutput) ElementType 

func (ExtenderModem1AutoSwitchOutput) ElementType() reflect.Type

func (ExtenderModem1AutoSwitchOutput) Signal 

func (o ExtenderModem1AutoSwitchOutput) Signal() pulumi.StringPtrOutput

Automatically switch based on signal strength. Valid values: `disable`, `enable`.

func (ExtenderModem1AutoSwitchOutput) SwitchBack 

func (o ExtenderModem1AutoSwitchOutput) SwitchBack() pulumi.StringPtrOutput

Auto switch with switch back multi-options. Valid values: `time`, `timer`.

func (ExtenderModem1AutoSwitchOutput) SwitchBackTime 

func (o ExtenderModem1AutoSwitchOutput) SwitchBackTime() pulumi.StringPtrOutput

Automatically switch over to preferred SIM/carrier at a specified time in UTC (HH:MM).

func (ExtenderModem1AutoSwitchOutput) SwitchBackTimer 

func (o ExtenderModem1AutoSwitchOutput) SwitchBackTimer() pulumi.IntPtrOutput

Automatically switch over to preferred SIM/carrier after the given time (3600 - 2147483647 sec).

func (ExtenderModem1AutoSwitchOutput) ToExtenderModem1AutoSwitchOutput 

func (o ExtenderModem1AutoSwitchOutput) ToExtenderModem1AutoSwitchOutput() ExtenderModem1AutoSwitchOutput

func (ExtenderModem1AutoSwitchOutput) ToExtenderModem1AutoSwitchOutputWithContext 

func (o ExtenderModem1AutoSwitchOutput) ToExtenderModem1AutoSwitchOutputWithContext(ctx context.Context) ExtenderModem1AutoSwitchOutput

func (ExtenderModem1AutoSwitchOutput) ToExtenderModem1AutoSwitchPtrOutput 

func (o ExtenderModem1AutoSwitchOutput) ToExtenderModem1AutoSwitchPtrOutput() ExtenderModem1AutoSwitchPtrOutput

func (ExtenderModem1AutoSwitchOutput) ToExtenderModem1AutoSwitchPtrOutputWithContext 

func (o ExtenderModem1AutoSwitchOutput) ToExtenderModem1AutoSwitchPtrOutputWithContext(ctx context.Context) ExtenderModem1AutoSwitchPtrOutput

type ExtenderModem1AutoSwitchPtrInput 

type ExtenderModem1AutoSwitchPtrInput interface {
	pulumi.Input

	ToExtenderModem1AutoSwitchPtrOutput() ExtenderModem1AutoSwitchPtrOutput
	ToExtenderModem1AutoSwitchPtrOutputWithContext(context.Context) ExtenderModem1AutoSwitchPtrOutput
}

ExtenderModem1AutoSwitchPtrInput is an input type that accepts ExtenderModem1AutoSwitchArgs, ExtenderModem1AutoSwitchPtr and ExtenderModem1AutoSwitchPtrOutput values. You can construct a concrete instance of `ExtenderModem1AutoSwitchPtrInput` via: 

        ExtenderModem1AutoSwitchArgs{...}

or:

        nil

func ExtenderModem1AutoSwitchPtr 

func ExtenderModem1AutoSwitchPtr(v *ExtenderModem1AutoSwitchArgs) ExtenderModem1AutoSwitchPtrInput

type ExtenderModem1AutoSwitchPtrOutput 

type ExtenderModem1AutoSwitchPtrOutput struct{ *pulumi.OutputState }

func (ExtenderModem1AutoSwitchPtrOutput) Dataplan 

func (o ExtenderModem1AutoSwitchPtrOutput) Dataplan() pulumi.StringPtrOutput

Automatically switch based on data usage. Valid values: `disable`, `enable`.

func (ExtenderModem1AutoSwitchPtrOutput) Disconnect 

func (o ExtenderModem1AutoSwitchPtrOutput) Disconnect() pulumi.StringPtrOutput

Auto switch by disconnect. Valid values: `disable`, `enable`.

func (ExtenderModem1AutoSwitchPtrOutput) DisconnectPeriod 

func (o ExtenderModem1AutoSwitchPtrOutput) DisconnectPeriod() pulumi.IntPtrOutput

Automatically switch based on disconnect period.

func (ExtenderModem1AutoSwitchPtrOutput) DisconnectThreshold 

func (o ExtenderModem1AutoSwitchPtrOutput) DisconnectThreshold() pulumi.IntPtrOutput

Automatically switch based on disconnect threshold.

func (ExtenderModem1AutoSwitchPtrOutput) Elem 

func (o ExtenderModem1AutoSwitchPtrOutput) Elem() ExtenderModem1AutoSwitchOutput

func (ExtenderModem1AutoSwitchPtrOutput) ElementType 

func (ExtenderModem1AutoSwitchPtrOutput) ElementType() reflect.Type

func (ExtenderModem1AutoSwitchPtrOutput) Signal 

func (o ExtenderModem1AutoSwitchPtrOutput) Signal() pulumi.StringPtrOutput

Automatically switch based on signal strength. Valid values: `disable`, `enable`.

func (ExtenderModem1AutoSwitchPtrOutput) SwitchBack 

func (o ExtenderModem1AutoSwitchPtrOutput) SwitchBack() pulumi.StringPtrOutput

Auto switch with switch back multi-options. Valid values: `time`, `timer`.

func (ExtenderModem1AutoSwitchPtrOutput) SwitchBackTime 

func (o ExtenderModem1AutoSwitchPtrOutput) SwitchBackTime() pulumi.StringPtrOutput

Automatically switch over to preferred SIM/carrier at a specified time in UTC (HH:MM).

func (ExtenderModem1AutoSwitchPtrOutput) SwitchBackTimer 

func (o ExtenderModem1AutoSwitchPtrOutput) SwitchBackTimer() pulumi.IntPtrOutput

Automatically switch over to preferred SIM/carrier after the given time (3600 - 2147483647 sec).

func (ExtenderModem1AutoSwitchPtrOutput) ToExtenderModem1AutoSwitchPtrOutput 

func (o ExtenderModem1AutoSwitchPtrOutput) ToExtenderModem1AutoSwitchPtrOutput() ExtenderModem1AutoSwitchPtrOutput

func (ExtenderModem1AutoSwitchPtrOutput) ToExtenderModem1AutoSwitchPtrOutputWithContext 

func (o ExtenderModem1AutoSwitchPtrOutput) ToExtenderModem1AutoSwitchPtrOutputWithContext(ctx context.Context) ExtenderModem1AutoSwitchPtrOutput

type ExtenderModem1Input 

type ExtenderModem1Input interface {
	pulumi.Input

	ToExtenderModem1Output() ExtenderModem1Output
	ToExtenderModem1OutputWithContext(context.Context) ExtenderModem1Output
}

ExtenderModem1Input is an input type that accepts ExtenderModem1Args and ExtenderModem1Output values. You can construct a concrete instance of `ExtenderModem1Input` via: 

ExtenderModem1Args{...}

type ExtenderModem1Output 

type ExtenderModem1Output struct{ *pulumi.OutputState }

func (ExtenderModem1Output) AutoSwitch 

func (o ExtenderModem1Output) AutoSwitch() ExtenderModem1AutoSwitchPtrOutput

func (ExtenderModem1Output) ConnStatus 

func (o ExtenderModem1Output) ConnStatus() pulumi.IntPtrOutput

Connection status.

func (ExtenderModem1Output) DefaultSim 

func (o ExtenderModem1Output) DefaultSim() pulumi.StringPtrOutput

func (ExtenderModem1Output) ElementType 

func (ExtenderModem1Output) ElementType() reflect.Type

func (ExtenderModem1Output) Gps 

func (o ExtenderModem1Output) Gps() pulumi.StringPtrOutput

func (ExtenderModem1Output) Ifname 

func (o ExtenderModem1Output) Ifname() pulumi.StringPtrOutput

FortiExtender interface name.

func (ExtenderModem1Output) PreferredCarrier 

func (o ExtenderModem1Output) PreferredCarrier() pulumi.StringPtrOutput

func (ExtenderModem1Output) RedundantIntf 

func (o ExtenderModem1Output) RedundantIntf() pulumi.StringPtrOutput

Redundant interface.

func (ExtenderModem1Output) RedundantMode 

func (o ExtenderModem1Output) RedundantMode() pulumi.StringPtrOutput

func (ExtenderModem1Output) Sim1Pin 

func (o ExtenderModem1Output) Sim1Pin() pulumi.StringPtrOutput

func (ExtenderModem1Output) Sim1PinCode 

func (o ExtenderModem1Output) Sim1PinCode() pulumi.StringPtrOutput

func (ExtenderModem1Output) Sim2Pin 

func (o ExtenderModem1Output) Sim2Pin() pulumi.StringPtrOutput

func (ExtenderModem1Output) Sim2PinCode 

func (o ExtenderModem1Output) Sim2PinCode() pulumi.StringPtrOutput

func (ExtenderModem1Output) ToExtenderModem1Output 

func (o ExtenderModem1Output) ToExtenderModem1Output() ExtenderModem1Output

func (ExtenderModem1Output) ToExtenderModem1OutputWithContext 

func (o ExtenderModem1Output) ToExtenderModem1OutputWithContext(ctx context.Context) ExtenderModem1Output

func (ExtenderModem1Output) ToExtenderModem1PtrOutput 

func (o ExtenderModem1Output) ToExtenderModem1PtrOutput() ExtenderModem1PtrOutput

func (ExtenderModem1Output) ToExtenderModem1PtrOutputWithContext 

func (o ExtenderModem1Output) ToExtenderModem1PtrOutputWithContext(ctx context.Context) ExtenderModem1PtrOutput

type ExtenderModem1PtrInput 

type ExtenderModem1PtrInput interface {
	pulumi.Input

	ToExtenderModem1PtrOutput() ExtenderModem1PtrOutput
	ToExtenderModem1PtrOutputWithContext(context.Context) ExtenderModem1PtrOutput
}

ExtenderModem1PtrInput is an input type that accepts ExtenderModem1Args, ExtenderModem1Ptr and ExtenderModem1PtrOutput values. You can construct a concrete instance of `ExtenderModem1PtrInput` via: 

        ExtenderModem1Args{...}

or:

        nil

func ExtenderModem1Ptr 

func ExtenderModem1Ptr(v *ExtenderModem1Args) ExtenderModem1PtrInput

type ExtenderModem1PtrOutput 

type ExtenderModem1PtrOutput struct{ *pulumi.OutputState }

func (ExtenderModem1PtrOutput) AutoSwitch 

func (o ExtenderModem1PtrOutput) AutoSwitch() ExtenderModem1AutoSwitchPtrOutput

func (ExtenderModem1PtrOutput) ConnStatus 

func (o ExtenderModem1PtrOutput) ConnStatus() pulumi.IntPtrOutput

Connection status.

func (ExtenderModem1PtrOutput) DefaultSim 

func (o ExtenderModem1PtrOutput) DefaultSim() pulumi.StringPtrOutput

func (ExtenderModem1PtrOutput) Elem 

func (o ExtenderModem1PtrOutput) Elem() ExtenderModem1Output

func (ExtenderModem1PtrOutput) ElementType 

func (ExtenderModem1PtrOutput) ElementType() reflect.Type

func (ExtenderModem1PtrOutput) Gps 

func (o ExtenderModem1PtrOutput) Gps() pulumi.StringPtrOutput

func (ExtenderModem1PtrOutput) Ifname 

func (o ExtenderModem1PtrOutput) Ifname() pulumi.StringPtrOutput

FortiExtender interface name.

func (ExtenderModem1PtrOutput) PreferredCarrier 

func (o ExtenderModem1PtrOutput) PreferredCarrier() pulumi.StringPtrOutput

func (ExtenderModem1PtrOutput) RedundantIntf 

func (o ExtenderModem1PtrOutput) RedundantIntf() pulumi.StringPtrOutput

Redundant interface.

func (ExtenderModem1PtrOutput) RedundantMode 

func (o ExtenderModem1PtrOutput) RedundantMode() pulumi.StringPtrOutput

func (ExtenderModem1PtrOutput) Sim1Pin 

func (o ExtenderModem1PtrOutput) Sim1Pin() pulumi.StringPtrOutput

func (ExtenderModem1PtrOutput) Sim1PinCode 

func (o ExtenderModem1PtrOutput) Sim1PinCode() pulumi.StringPtrOutput

func (ExtenderModem1PtrOutput) Sim2Pin 

func (o ExtenderModem1PtrOutput) Sim2Pin() pulumi.StringPtrOutput

func (ExtenderModem1PtrOutput) Sim2PinCode 

func (o ExtenderModem1PtrOutput) Sim2PinCode() pulumi.StringPtrOutput

func (ExtenderModem1PtrOutput) ToExtenderModem1PtrOutput 

func (o ExtenderModem1PtrOutput) ToExtenderModem1PtrOutput() ExtenderModem1PtrOutput

func (ExtenderModem1PtrOutput) ToExtenderModem1PtrOutputWithContext 

func (o ExtenderModem1PtrOutput) ToExtenderModem1PtrOutputWithContext(ctx context.Context) ExtenderModem1PtrOutput

type ExtenderModem2 

type ExtenderModem2 struct {
	AutoSwitch *ExtenderModem2AutoSwitch `pulumi:"autoSwitch"`
	// Connection status.
	ConnStatus *int    `pulumi:"connStatus"`
	DefaultSim *string `pulumi:"defaultSim"`
	Gps        *string `pulumi:"gps"`
	// FortiExtender interface name.
	Ifname           *string `pulumi:"ifname"`
	PreferredCarrier *string `pulumi:"preferredCarrier"`
	// Redundant interface.
	RedundantIntf *string `pulumi:"redundantIntf"`
	RedundantMode *string `pulumi:"redundantMode"`
	Sim1Pin       *string `pulumi:"sim1Pin"`
	Sim1PinCode   *string `pulumi:"sim1PinCode"`
	Sim2Pin       *string `pulumi:"sim2Pin"`
	Sim2PinCode   *string `pulumi:"sim2PinCode"`
}

type ExtenderModem2Args 

type ExtenderModem2Args struct {
	AutoSwitch ExtenderModem2AutoSwitchPtrInput `pulumi:"autoSwitch"`
	// Connection status.
	ConnStatus pulumi.IntPtrInput    `pulumi:"connStatus"`
	DefaultSim pulumi.StringPtrInput `pulumi:"defaultSim"`
	Gps        pulumi.StringPtrInput `pulumi:"gps"`
	// FortiExtender interface name.
	Ifname           pulumi.StringPtrInput `pulumi:"ifname"`
	PreferredCarrier pulumi.StringPtrInput `pulumi:"preferredCarrier"`
	// Redundant interface.
	RedundantIntf pulumi.StringPtrInput `pulumi:"redundantIntf"`
	RedundantMode pulumi.StringPtrInput `pulumi:"redundantMode"`
	Sim1Pin       pulumi.StringPtrInput `pulumi:"sim1Pin"`
	Sim1PinCode   pulumi.StringPtrInput `pulumi:"sim1PinCode"`
	Sim2Pin       pulumi.StringPtrInput `pulumi:"sim2Pin"`
	Sim2PinCode   pulumi.StringPtrInput `pulumi:"sim2PinCode"`
}

func (ExtenderModem2Args) ElementType 

func (ExtenderModem2Args) ElementType() reflect.Type

func (ExtenderModem2Args) ToExtenderModem2Output 

func (i ExtenderModem2Args) ToExtenderModem2Output() ExtenderModem2Output

func (ExtenderModem2Args) ToExtenderModem2OutputWithContext 

func (i ExtenderModem2Args) ToExtenderModem2OutputWithContext(ctx context.Context) ExtenderModem2Output

func (ExtenderModem2Args) ToExtenderModem2PtrOutput 

func (i ExtenderModem2Args) ToExtenderModem2PtrOutput() ExtenderModem2PtrOutput

func (ExtenderModem2Args) ToExtenderModem2PtrOutputWithContext 

func (i ExtenderModem2Args) ToExtenderModem2PtrOutputWithContext(ctx context.Context) ExtenderModem2PtrOutput

type ExtenderModem2AutoSwitch 

type ExtenderModem2AutoSwitch struct {
	// Automatically switch based on data usage. Valid values: `disable`, `enable`.
	Dataplan *string `pulumi:"dataplan"`
	// Auto switch by disconnect. Valid values: `disable`, `enable`.
	Disconnect *string `pulumi:"disconnect"`
	// Automatically switch based on disconnect period.
	DisconnectPeriod *int `pulumi:"disconnectPeriod"`
	// Automatically switch based on disconnect threshold.
	DisconnectThreshold *int `pulumi:"disconnectThreshold"`
	// Automatically switch based on signal strength. Valid values: `disable`, `enable`.
	Signal *string `pulumi:"signal"`
	// Auto switch with switch back multi-options. Valid values: `time`, `timer`.
	SwitchBack *string `pulumi:"switchBack"`
	// Automatically switch over to preferred SIM/carrier at a specified time in UTC (HH:MM).
	SwitchBackTime *string `pulumi:"switchBackTime"`
	// Automatically switch over to preferred SIM/carrier after the given time (3600 - 2147483647 sec).
	SwitchBackTimer *int `pulumi:"switchBackTimer"`
}

type ExtenderModem2AutoSwitchArgs 

type ExtenderModem2AutoSwitchArgs struct {
	// Automatically switch based on data usage. Valid values: `disable`, `enable`.
	Dataplan pulumi.StringPtrInput `pulumi:"dataplan"`
	// Auto switch by disconnect. Valid values: `disable`, `enable`.
	Disconnect pulumi.StringPtrInput `pulumi:"disconnect"`
	// Automatically switch based on disconnect period.
	DisconnectPeriod pulumi.IntPtrInput `pulumi:"disconnectPeriod"`
	// Automatically switch based on disconnect threshold.
	DisconnectThreshold pulumi.IntPtrInput `pulumi:"disconnectThreshold"`
	// Automatically switch based on signal strength. Valid values: `disable`, `enable`.
	Signal pulumi.StringPtrInput `pulumi:"signal"`
	// Auto switch with switch back multi-options. Valid values: `time`, `timer`.
	SwitchBack pulumi.StringPtrInput `pulumi:"switchBack"`
	// Automatically switch over to preferred SIM/carrier at a specified time in UTC (HH:MM).
	SwitchBackTime pulumi.StringPtrInput `pulumi:"switchBackTime"`
	// Automatically switch over to preferred SIM/carrier after the given time (3600 - 2147483647 sec).
	SwitchBackTimer pulumi.IntPtrInput `pulumi:"switchBackTimer"`
}

func (ExtenderModem2AutoSwitchArgs) ElementType 

func (ExtenderModem2AutoSwitchArgs) ElementType() reflect.Type

func (ExtenderModem2AutoSwitchArgs) ToExtenderModem2AutoSwitchOutput 

func (i ExtenderModem2AutoSwitchArgs) ToExtenderModem2AutoSwitchOutput() ExtenderModem2AutoSwitchOutput

func (ExtenderModem2AutoSwitchArgs) ToExtenderModem2AutoSwitchOutputWithContext 

func (i ExtenderModem2AutoSwitchArgs) ToExtenderModem2AutoSwitchOutputWithContext(ctx context.Context) ExtenderModem2AutoSwitchOutput

func (ExtenderModem2AutoSwitchArgs) ToExtenderModem2AutoSwitchPtrOutput 

func (i ExtenderModem2AutoSwitchArgs) ToExtenderModem2AutoSwitchPtrOutput() ExtenderModem2AutoSwitchPtrOutput

func (ExtenderModem2AutoSwitchArgs) ToExtenderModem2AutoSwitchPtrOutputWithContext 

func (i ExtenderModem2AutoSwitchArgs) ToExtenderModem2AutoSwitchPtrOutputWithContext(ctx context.Context) ExtenderModem2AutoSwitchPtrOutput

type ExtenderModem2AutoSwitchInput 

type ExtenderModem2AutoSwitchInput interface {
	pulumi.Input

	ToExtenderModem2AutoSwitchOutput() ExtenderModem2AutoSwitchOutput
	ToExtenderModem2AutoSwitchOutputWithContext(context.Context) ExtenderModem2AutoSwitchOutput
}

ExtenderModem2AutoSwitchInput is an input type that accepts ExtenderModem2AutoSwitchArgs and ExtenderModem2AutoSwitchOutput values. You can construct a concrete instance of `ExtenderModem2AutoSwitchInput` via: 

ExtenderModem2AutoSwitchArgs{...}

type ExtenderModem2AutoSwitchOutput 

type ExtenderModem2AutoSwitchOutput struct{ *pulumi.OutputState }

func (ExtenderModem2AutoSwitchOutput) Dataplan 

func (o ExtenderModem2AutoSwitchOutput) Dataplan() pulumi.StringPtrOutput

Automatically switch based on data usage. Valid values: `disable`, `enable`.

func (ExtenderModem2AutoSwitchOutput) Disconnect 

func (o ExtenderModem2AutoSwitchOutput) Disconnect() pulumi.StringPtrOutput

Auto switch by disconnect. Valid values: `disable`, `enable`.

func (ExtenderModem2AutoSwitchOutput) DisconnectPeriod 

func (o ExtenderModem2AutoSwitchOutput) DisconnectPeriod() pulumi.IntPtrOutput

Automatically switch based on disconnect period.

func (ExtenderModem2AutoSwitchOutput) DisconnectThreshold 

func (o ExtenderModem2AutoSwitchOutput) DisconnectThreshold() pulumi.IntPtrOutput

Automatically switch based on disconnect threshold.

func (ExtenderModem2AutoSwitchOutput) ElementType 

func (ExtenderModem2AutoSwitchOutput) ElementType() reflect.Type

func (ExtenderModem2AutoSwitchOutput) Signal 

func (o ExtenderModem2AutoSwitchOutput) Signal() pulumi.StringPtrOutput

Automatically switch based on signal strength. Valid values: `disable`, `enable`.

func (ExtenderModem2AutoSwitchOutput) SwitchBack 

func (o ExtenderModem2AutoSwitchOutput) SwitchBack() pulumi.StringPtrOutput

Auto switch with switch back multi-options. Valid values: `time`, `timer`.

func (ExtenderModem2AutoSwitchOutput) SwitchBackTime 

func (o ExtenderModem2AutoSwitchOutput) SwitchBackTime() pulumi.StringPtrOutput

Automatically switch over to preferred SIM/carrier at a specified time in UTC (HH:MM).

func (ExtenderModem2AutoSwitchOutput) SwitchBackTimer 

func (o ExtenderModem2AutoSwitchOutput) SwitchBackTimer() pulumi.IntPtrOutput

Automatically switch over to preferred SIM/carrier after the given time (3600 - 2147483647 sec).

func (ExtenderModem2AutoSwitchOutput) ToExtenderModem2AutoSwitchOutput 

func (o ExtenderModem2AutoSwitchOutput) ToExtenderModem2AutoSwitchOutput() ExtenderModem2AutoSwitchOutput

func (ExtenderModem2AutoSwitchOutput) ToExtenderModem2AutoSwitchOutputWithContext 

func (o ExtenderModem2AutoSwitchOutput) ToExtenderModem2AutoSwitchOutputWithContext(ctx context.Context) ExtenderModem2AutoSwitchOutput

func (ExtenderModem2AutoSwitchOutput) ToExtenderModem2AutoSwitchPtrOutput 

func (o ExtenderModem2AutoSwitchOutput) ToExtenderModem2AutoSwitchPtrOutput() ExtenderModem2AutoSwitchPtrOutput

func (ExtenderModem2AutoSwitchOutput) ToExtenderModem2AutoSwitchPtrOutputWithContext 

func (o ExtenderModem2AutoSwitchOutput) ToExtenderModem2AutoSwitchPtrOutputWithContext(ctx context.Context) ExtenderModem2AutoSwitchPtrOutput

type ExtenderModem2AutoSwitchPtrInput 

type ExtenderModem2AutoSwitchPtrInput interface {
	pulumi.Input

	ToExtenderModem2AutoSwitchPtrOutput() ExtenderModem2AutoSwitchPtrOutput
	ToExtenderModem2AutoSwitchPtrOutputWithContext(context.Context) ExtenderModem2AutoSwitchPtrOutput
}

ExtenderModem2AutoSwitchPtrInput is an input type that accepts ExtenderModem2AutoSwitchArgs, ExtenderModem2AutoSwitchPtr and ExtenderModem2AutoSwitchPtrOutput values. You can construct a concrete instance of `ExtenderModem2AutoSwitchPtrInput` via: 

        ExtenderModem2AutoSwitchArgs{...}

or:

        nil

func ExtenderModem2AutoSwitchPtr 

func ExtenderModem2AutoSwitchPtr(v *ExtenderModem2AutoSwitchArgs) ExtenderModem2AutoSwitchPtrInput

type ExtenderModem2AutoSwitchPtrOutput 

type ExtenderModem2AutoSwitchPtrOutput struct{ *pulumi.OutputState }

func (ExtenderModem2AutoSwitchPtrOutput) Dataplan 

func (o ExtenderModem2AutoSwitchPtrOutput) Dataplan() pulumi.StringPtrOutput

Automatically switch based on data usage. Valid values: `disable`, `enable`.

func (ExtenderModem2AutoSwitchPtrOutput) Disconnect 

func (o ExtenderModem2AutoSwitchPtrOutput) Disconnect() pulumi.StringPtrOutput

Auto switch by disconnect. Valid values: `disable`, `enable`.

func (ExtenderModem2AutoSwitchPtrOutput) DisconnectPeriod 

func (o ExtenderModem2AutoSwitchPtrOutput) DisconnectPeriod() pulumi.IntPtrOutput

Automatically switch based on disconnect period.

func (ExtenderModem2AutoSwitchPtrOutput) DisconnectThreshold 

func (o ExtenderModem2AutoSwitchPtrOutput) DisconnectThreshold() pulumi.IntPtrOutput

Automatically switch based on disconnect threshold.

func (ExtenderModem2AutoSwitchPtrOutput) Elem 

func (o ExtenderModem2AutoSwitchPtrOutput) Elem() ExtenderModem2AutoSwitchOutput

func (ExtenderModem2AutoSwitchPtrOutput) ElementType 

func (ExtenderModem2AutoSwitchPtrOutput) ElementType() reflect.Type

func (ExtenderModem2AutoSwitchPtrOutput) Signal 

func (o ExtenderModem2AutoSwitchPtrOutput) Signal() pulumi.StringPtrOutput

Automatically switch based on signal strength. Valid values: `disable`, `enable`.

func (ExtenderModem2AutoSwitchPtrOutput) SwitchBack 

func (o ExtenderModem2AutoSwitchPtrOutput) SwitchBack() pulumi.StringPtrOutput

Auto switch with switch back multi-options. Valid values: `time`, `timer`.

func (ExtenderModem2AutoSwitchPtrOutput) SwitchBackTime 

func (o ExtenderModem2AutoSwitchPtrOutput) SwitchBackTime() pulumi.StringPtrOutput

Automatically switch over to preferred SIM/carrier at a specified time in UTC (HH:MM).

func (ExtenderModem2AutoSwitchPtrOutput) SwitchBackTimer 

func (o ExtenderModem2AutoSwitchPtrOutput) SwitchBackTimer() pulumi.IntPtrOutput

Automatically switch over to preferred SIM/carrier after the given time (3600 - 2147483647 sec).

func (ExtenderModem2AutoSwitchPtrOutput) ToExtenderModem2AutoSwitchPtrOutput 

func (o ExtenderModem2AutoSwitchPtrOutput) ToExtenderModem2AutoSwitchPtrOutput() ExtenderModem2AutoSwitchPtrOutput

func (ExtenderModem2AutoSwitchPtrOutput) ToExtenderModem2AutoSwitchPtrOutputWithContext 

func (o ExtenderModem2AutoSwitchPtrOutput) ToExtenderModem2AutoSwitchPtrOutputWithContext(ctx context.Context) ExtenderModem2AutoSwitchPtrOutput

type ExtenderModem2Input 

type ExtenderModem2Input interface {
	pulumi.Input

	ToExtenderModem2Output() ExtenderModem2Output
	ToExtenderModem2OutputWithContext(context.Context) ExtenderModem2Output
}

ExtenderModem2Input is an input type that accepts ExtenderModem2Args and ExtenderModem2Output values. You can construct a concrete instance of `ExtenderModem2Input` via: 

ExtenderModem2Args{...}

type ExtenderModem2Output 

type ExtenderModem2Output struct{ *pulumi.OutputState }

func (ExtenderModem2Output) AutoSwitch 

func (o ExtenderModem2Output) AutoSwitch() ExtenderModem2AutoSwitchPtrOutput

func (ExtenderModem2Output) ConnStatus 

func (o ExtenderModem2Output) ConnStatus() pulumi.IntPtrOutput

Connection status.

func (ExtenderModem2Output) DefaultSim 

func (o ExtenderModem2Output) DefaultSim() pulumi.StringPtrOutput

func (ExtenderModem2Output) ElementType 

func (ExtenderModem2Output) ElementType() reflect.Type

func (ExtenderModem2Output) Gps 

func (o ExtenderModem2Output) Gps() pulumi.StringPtrOutput

func (ExtenderModem2Output) Ifname 

func (o ExtenderModem2Output) Ifname() pulumi.StringPtrOutput

FortiExtender interface name.

func (ExtenderModem2Output) PreferredCarrier 

func (o ExtenderModem2Output) PreferredCarrier() pulumi.StringPtrOutput

func (ExtenderModem2Output) RedundantIntf 

func (o ExtenderModem2Output) RedundantIntf() pulumi.StringPtrOutput

Redundant interface.

func (ExtenderModem2Output) RedundantMode 

func (o ExtenderModem2Output) RedundantMode() pulumi.StringPtrOutput

func (ExtenderModem2Output) Sim1Pin 

func (o ExtenderModem2Output) Sim1Pin() pulumi.StringPtrOutput

func (ExtenderModem2Output) Sim1PinCode 

func (o ExtenderModem2Output) Sim1PinCode() pulumi.StringPtrOutput

func (ExtenderModem2Output) Sim2Pin 

func (o ExtenderModem2Output) Sim2Pin() pulumi.StringPtrOutput

func (ExtenderModem2Output) Sim2PinCode 

func (o ExtenderModem2Output) Sim2PinCode() pulumi.StringPtrOutput

func (ExtenderModem2Output) ToExtenderModem2Output 

func (o ExtenderModem2Output) ToExtenderModem2Output() ExtenderModem2Output

func (ExtenderModem2Output) ToExtenderModem2OutputWithContext 

func (o ExtenderModem2Output) ToExtenderModem2OutputWithContext(ctx context.Context) ExtenderModem2Output

func (ExtenderModem2Output) ToExtenderModem2PtrOutput 

func (o ExtenderModem2Output) ToExtenderModem2PtrOutput() ExtenderModem2PtrOutput

func (ExtenderModem2Output) ToExtenderModem2PtrOutputWithContext 

func (o ExtenderModem2Output) ToExtenderModem2PtrOutputWithContext(ctx context.Context) ExtenderModem2PtrOutput

type ExtenderModem2PtrInput 

type ExtenderModem2PtrInput interface {
	pulumi.Input

	ToExtenderModem2PtrOutput() ExtenderModem2PtrOutput
	ToExtenderModem2PtrOutputWithContext(context.Context) ExtenderModem2PtrOutput
}

ExtenderModem2PtrInput is an input type that accepts ExtenderModem2Args, ExtenderModem2Ptr and ExtenderModem2PtrOutput values. You can construct a concrete instance of `ExtenderModem2PtrInput` via: 

        ExtenderModem2Args{...}

or:

        nil

func ExtenderModem2Ptr 

func ExtenderModem2Ptr(v *ExtenderModem2Args) ExtenderModem2PtrInput

type ExtenderModem2PtrOutput 

type ExtenderModem2PtrOutput struct{ *pulumi.OutputState }

func (ExtenderModem2PtrOutput) AutoSwitch 

func (o ExtenderModem2PtrOutput) AutoSwitch() ExtenderModem2AutoSwitchPtrOutput

func (ExtenderModem2PtrOutput) ConnStatus 

func (o ExtenderModem2PtrOutput) ConnStatus() pulumi.IntPtrOutput

Connection status.

func (ExtenderModem2PtrOutput) DefaultSim 

func (o ExtenderModem2PtrOutput) DefaultSim() pulumi.StringPtrOutput

func (ExtenderModem2PtrOutput) Elem 

func (o ExtenderModem2PtrOutput) Elem() ExtenderModem2Output

func (ExtenderModem2PtrOutput) ElementType 

func (ExtenderModem2PtrOutput) ElementType() reflect.Type

func (ExtenderModem2PtrOutput) Gps 

func (o ExtenderModem2PtrOutput) Gps() pulumi.StringPtrOutput

func (ExtenderModem2PtrOutput) Ifname 

func (o ExtenderModem2PtrOutput) Ifname() pulumi.StringPtrOutput

FortiExtender interface name.

func (ExtenderModem2PtrOutput) PreferredCarrier 

func (o ExtenderModem2PtrOutput) PreferredCarrier() pulumi.StringPtrOutput

func (ExtenderModem2PtrOutput) RedundantIntf 

func (o ExtenderModem2PtrOutput) RedundantIntf() pulumi.StringPtrOutput

Redundant interface.

func (ExtenderModem2PtrOutput) RedundantMode 

func (o ExtenderModem2PtrOutput) RedundantMode() pulumi.StringPtrOutput

func (ExtenderModem2PtrOutput) Sim1Pin 

func (o ExtenderModem2PtrOutput) Sim1Pin() pulumi.StringPtrOutput

func (ExtenderModem2PtrOutput) Sim1PinCode 

func (o ExtenderModem2PtrOutput) Sim1PinCode() pulumi.StringPtrOutput

func (ExtenderModem2PtrOutput) Sim2Pin 

func (o ExtenderModem2PtrOutput) Sim2Pin() pulumi.StringPtrOutput

func (ExtenderModem2PtrOutput) Sim2PinCode 

func (o ExtenderModem2PtrOutput) Sim2PinCode() pulumi.StringPtrOutput

func (ExtenderModem2PtrOutput) ToExtenderModem2PtrOutput 

func (o ExtenderModem2PtrOutput) ToExtenderModem2PtrOutput() ExtenderModem2PtrOutput

func (ExtenderModem2PtrOutput) ToExtenderModem2PtrOutputWithContext 

func (o ExtenderModem2PtrOutput) ToExtenderModem2PtrOutputWithContext(ctx context.Context) ExtenderModem2PtrOutput

type ExtenderOutput 

type ExtenderOutput struct{ *pulumi.OutputState }

func (ExtenderOutput) AaaSharedSecret 

func (o ExtenderOutput) AaaSharedSecret() pulumi.StringPtrOutput

AAA shared secret.

func (ExtenderOutput) AccessPointName 

func (o ExtenderOutput) AccessPointName() pulumi.StringOutput

Access point name(APN).

func (ExtenderOutput) Admin 

func (o ExtenderOutput) Admin() pulumi.StringOutput

FortiExtender Administration (enable or disable). Valid values: `disable`, `discovered`, `enable`.

func (ExtenderOutput) Allowaccess 

func (o ExtenderOutput) Allowaccess() pulumi.StringOutput

Control management access to the managed extender. Separate entries with a space. Valid values: `ping`, `telnet`, `http`, `https`, `ssh`, `snmp`.

func (ExtenderOutput) AtDialScript 

func (o ExtenderOutput) AtDialScript() pulumi.StringOutput

Initialization AT commands specific to the MODEM.

func (ExtenderOutput) Authorized 

func (o ExtenderOutput) Authorized() pulumi.StringOutput

FortiExtender Administration (enable or disable). Valid values: `disable`, `enable`.

func (ExtenderOutput) BandwidthLimit 

func (o ExtenderOutput) BandwidthLimit() pulumi.IntOutput

FortiExtender LAN extension bandwidth limit (Mbps).

func (ExtenderOutput) BillingStartDay 

func (o ExtenderOutput) BillingStartDay() pulumi.IntOutput

Billing start day.

func (ExtenderOutput) CdmaAaaSpi 

func (o ExtenderOutput) CdmaAaaSpi() pulumi.StringOutput

CDMA AAA SPI.

func (ExtenderOutput) CdmaHaSpi 

func (o ExtenderOutput) CdmaHaSpi() pulumi.StringOutput

CDMA HA SPI.

func (ExtenderOutput) CdmaNai 

func (o ExtenderOutput) CdmaNai() pulumi.StringOutput

NAI for CDMA MODEMS.

func (ExtenderOutput) ConnStatus 

func (o ExtenderOutput) ConnStatus() pulumi.IntOutput

Connection status.

func (ExtenderOutput) ControllerReport 

func (o ExtenderOutput) ControllerReport() ExtenderControllerReportOutput

FortiExtender controller report configuration. The structure of `controllerReport` block is documented below.

func (ExtenderOutput) Description 

func (o ExtenderOutput) Description() pulumi.StringOutput

Description.

func (ExtenderOutput) DeviceId 

func (o ExtenderOutput) DeviceId() pulumi.IntOutput

device-id

func (ExtenderOutput) DialMode 

func (o ExtenderOutput) DialMode() pulumi.StringOutput

Dial mode (dial-on-demand or always-connect). Valid values: `dial-on-demand`, `always-connect`.

func (ExtenderOutput) DialStatus 

func (o ExtenderOutput) DialStatus() pulumi.IntOutput

Dial status.

func (ExtenderOutput) ElementType 

func (ExtenderOutput) ElementType() reflect.Type

func (ExtenderOutput) EnforceBandwidth 

func (o ExtenderOutput) EnforceBandwidth() pulumi.StringOutput

Enable/disable enforcement of bandwidth on LAN extension interface. Valid values: `enable`, `disable`.

func (ExtenderOutput) ExtName 

func (o ExtenderOutput) ExtName() pulumi.StringOutput

FortiExtender name.

func (ExtenderOutput) ExtensionType 

func (o ExtenderOutput) ExtensionType() pulumi.StringOutput

Extension type for this FortiExtender. Valid values: `wan-extension`, `lan-extension`.

func (ExtenderOutput) Fosid 

func (o ExtenderOutput) Fosid() pulumi.StringOutput

FortiExtender serial number.

func (ExtenderOutput) GetAllTables 

func (o ExtenderOutput) GetAllTables() pulumi.StringPtrOutput

Get all sub-tables including unconfigured tables. Do not set this variable to true if you configure sub-table in another resource, otherwise, conflicts and overwrite will occur. Options: [ false, true ]. false: Default value, do not get unconfigured tables; true: get all tables including unconfigured tables.

func (ExtenderOutput) HaSharedSecret 

func (o ExtenderOutput) HaSharedSecret() pulumi.StringPtrOutput

HA shared secret.

func (ExtenderOutput) Ifname 

func (o ExtenderOutput) Ifname() pulumi.StringOutput

FortiExtender interface name.

func (ExtenderOutput) InitiatedUpdate 

func (o ExtenderOutput) InitiatedUpdate() pulumi.StringOutput

Allow/disallow network initiated updates to the MODEM. Valid values: `enable`, `disable`.

func (ExtenderOutput) LoginPassword 

func (o ExtenderOutput) LoginPassword() pulumi.StringPtrOutput

FortiExtender login password.

func (ExtenderOutput) LoginPasswordChange 

func (o ExtenderOutput) LoginPasswordChange() pulumi.StringOutput

Change or reset the administrator password of a managed extender (yes, default, or no, default = no). Valid values: `yes`, `default`, `no`.

func (ExtenderOutput) Mode 

func (o ExtenderOutput) Mode() pulumi.StringOutput

FortiExtender mode. Valid values: `standalone`, `redundant`.

func (ExtenderOutput) Modem1 

func (o ExtenderOutput) Modem1() ExtenderModem1Output

Configuration options for modem 1. The structure of `modem1` block is documented below.

func (ExtenderOutput) Modem2 

func (o ExtenderOutput) Modem2() ExtenderModem2Output

Configuration options for modem 2. The structure of `modem2` block is documented below.

func (ExtenderOutput) ModemPasswd 

func (o ExtenderOutput) ModemPasswd() pulumi.StringPtrOutput

MODEM password.

func (ExtenderOutput) ModemType 

func (o ExtenderOutput) ModemType() pulumi.StringOutput

MODEM type (CDMA, GSM/LTE or WIMAX). Valid values: `cdma`, `gsm/lte`, `wimax`.

func (ExtenderOutput) MultiMode 

func (o ExtenderOutput) MultiMode() pulumi.StringOutput

MODEM mode of operation(3G,LTE,etc). Valid values: `auto`, `auto-3g`, `force-lte`, `force-3g`, `force-2g`.

func (ExtenderOutput) Name 

func (o ExtenderOutput) Name() pulumi.StringOutput

FortiExtender entry name.

func (ExtenderOutput) OverrideAllowaccess 

func (o ExtenderOutput) OverrideAllowaccess() pulumi.StringOutput

Enable to override the extender profile management access configuration. Valid values: `enable`, `disable`.

func (ExtenderOutput) OverrideEnforceBandwidth 

func (o ExtenderOutput) OverrideEnforceBandwidth() pulumi.StringOutput

Enable to override the extender profile enforce-bandwidth setting. Valid values: `enable`, `disable`.

func (ExtenderOutput) OverrideLoginPasswordChange 

func (o ExtenderOutput) OverrideLoginPasswordChange() pulumi.StringOutput

Enable to override the extender profile login-password (administrator password) setting. Valid values: `enable`, `disable`.

func (ExtenderOutput) PppAuthProtocol 

func (o ExtenderOutput) PppAuthProtocol() pulumi.StringOutput

PPP authentication protocol (PAP,CHAP or auto). Valid values: `auto`, `pap`, `chap`.

func (ExtenderOutput) PppEchoRequest 

func (o ExtenderOutput) PppEchoRequest() pulumi.StringOutput

Enable/disable PPP echo request. Valid values: `enable`, `disable`.

func (ExtenderOutput) PppPassword 

func (o ExtenderOutput) PppPassword() pulumi.StringPtrOutput

PPP password.

func (ExtenderOutput) PppUsername 

func (o ExtenderOutput) PppUsername() pulumi.StringOutput

PPP username.

func (ExtenderOutput) PrimaryHa 

func (o ExtenderOutput) PrimaryHa() pulumi.StringOutput

Primary HA.

func (ExtenderOutput) Profile 

func (o ExtenderOutput) Profile() pulumi.StringOutput

FortiExtender profile configuration.

func (ExtenderOutput) QuotaLimitMb 

func (o ExtenderOutput) QuotaLimitMb() pulumi.IntOutput

Monthly quota limit (MB).

func (ExtenderOutput) Redial 

func (o ExtenderOutput) Redial() pulumi.StringOutput

Number of redials allowed based on failed attempts. Valid values: `none`, `1`, `2`, `3`, `4`, `5`, `6`, `7`, `8`, `9`, `10`.

func (ExtenderOutput) RedundantIntf 

func (o ExtenderOutput) RedundantIntf() pulumi.StringOutput

Redundant interface.

func (ExtenderOutput) Roaming 

func (o ExtenderOutput) Roaming() pulumi.StringOutput

Enable/disable MODEM roaming. Valid values: `enable`, `disable`.

func (ExtenderOutput) Role 

func (o ExtenderOutput) Role() pulumi.StringOutput

FortiExtender work role(Primary, Secondary, None). Valid values: `none`, `primary`, `secondary`.

func (ExtenderOutput) SecondaryHa 

func (o ExtenderOutput) SecondaryHa() pulumi.StringOutput

Secondary HA.

func (ExtenderOutput) SimPin 

func (o ExtenderOutput) SimPin() pulumi.StringPtrOutput

SIM PIN.

func (ExtenderOutput) ToExtenderOutput 

func (o ExtenderOutput) ToExtenderOutput() ExtenderOutput

func (ExtenderOutput) ToExtenderOutputWithContext 

func (o ExtenderOutput) ToExtenderOutputWithContext(ctx context.Context) ExtenderOutput

func (ExtenderOutput) Vdom 

func (o ExtenderOutput) Vdom() pulumi.IntOutput

VDOM

func (ExtenderOutput) Vdomparam 

func (o ExtenderOutput) Vdomparam() pulumi.StringOutput

Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.

func (ExtenderOutput) WanExtension 

func (o ExtenderOutput) WanExtension() ExtenderWanExtensionOutput

FortiExtender wan extension configuration. The structure of `wanExtension` block is documented below.

func (ExtenderOutput) WimaxAuthProtocol 

func (o ExtenderOutput) WimaxAuthProtocol() pulumi.StringOutput

WiMax authentication protocol(TLS or TTLS). Valid values: `tls`, `ttls`.

func (ExtenderOutput) WimaxCarrier 

func (o ExtenderOutput) WimaxCarrier() pulumi.StringOutput

WiMax carrier.

func (ExtenderOutput) WimaxRealm 

func (o ExtenderOutput) WimaxRealm() pulumi.StringOutput

WiMax realm.

type ExtenderState 

type ExtenderState struct {
	// AAA shared secret.
	AaaSharedSecret pulumi.StringPtrInput
	// Access point name(APN).
	AccessPointName pulumi.StringPtrInput
	// FortiExtender Administration (enable or disable). Valid values: `disable`, `discovered`, `enable`.
	Admin pulumi.StringPtrInput
	// Control management access to the managed extender. Separate entries with a space. Valid values: `ping`, `telnet`, `http`, `https`, `ssh`, `snmp`.
	Allowaccess pulumi.StringPtrInput
	// Initialization AT commands specific to the MODEM.
	AtDialScript pulumi.StringPtrInput
	// FortiExtender Administration (enable or disable). Valid values: `disable`, `enable`.
	Authorized pulumi.StringPtrInput
	// FortiExtender LAN extension bandwidth limit (Mbps).
	BandwidthLimit pulumi.IntPtrInput
	// Billing start day.
	BillingStartDay pulumi.IntPtrInput
	// CDMA AAA SPI.
	CdmaAaaSpi pulumi.StringPtrInput
	// CDMA HA SPI.
	CdmaHaSpi pulumi.StringPtrInput
	// NAI for CDMA MODEMS.
	CdmaNai pulumi.StringPtrInput
	// Connection status.
	ConnStatus pulumi.IntPtrInput
	// FortiExtender controller report configuration. The structure of `controllerReport` block is documented below.
	ControllerReport ExtenderControllerReportPtrInput
	// Description.
	Description pulumi.StringPtrInput
	// device-id
	DeviceId pulumi.IntPtrInput
	// Dial mode (dial-on-demand or always-connect). Valid values: `dial-on-demand`, `always-connect`.
	DialMode pulumi.StringPtrInput
	// Dial status.
	DialStatus pulumi.IntPtrInput
	// Enable/disable enforcement of bandwidth on LAN extension interface. Valid values: `enable`, `disable`.
	EnforceBandwidth pulumi.StringPtrInput
	// FortiExtender name.
	ExtName pulumi.StringPtrInput
	// Extension type for this FortiExtender. Valid values: `wan-extension`, `lan-extension`.
	ExtensionType pulumi.StringPtrInput
	// FortiExtender serial number.
	Fosid pulumi.StringPtrInput
	// Get all sub-tables including unconfigured tables. Do not set this variable to true if you configure sub-table in another resource, otherwise, conflicts and overwrite will occur. Options: [ false, true ]. false: Default value, do not get unconfigured tables; true: get all tables including unconfigured tables.
	GetAllTables pulumi.StringPtrInput
	// HA shared secret.
	HaSharedSecret pulumi.StringPtrInput
	// FortiExtender interface name.
	Ifname pulumi.StringPtrInput
	// Allow/disallow network initiated updates to the MODEM. Valid values: `enable`, `disable`.
	InitiatedUpdate pulumi.StringPtrInput
	// FortiExtender login password.
	LoginPassword pulumi.StringPtrInput
	// Change or reset the administrator password of a managed extender (yes, default, or no, default = no). Valid values: `yes`, `default`, `no`.
	LoginPasswordChange pulumi.StringPtrInput
	// FortiExtender mode. Valid values: `standalone`, `redundant`.
	Mode pulumi.StringPtrInput
	// Configuration options for modem 1. The structure of `modem1` block is documented below.
	Modem1 ExtenderModem1PtrInput
	// Configuration options for modem 2. The structure of `modem2` block is documented below.
	Modem2 ExtenderModem2PtrInput
	// MODEM password.
	ModemPasswd pulumi.StringPtrInput
	// MODEM type (CDMA, GSM/LTE or WIMAX). Valid values: `cdma`, `gsm/lte`, `wimax`.
	ModemType pulumi.StringPtrInput
	// MODEM mode of operation(3G,LTE,etc). Valid values: `auto`, `auto-3g`, `force-lte`, `force-3g`, `force-2g`.
	MultiMode pulumi.StringPtrInput
	// FortiExtender entry name.
	Name pulumi.StringPtrInput
	// Enable to override the extender profile management access configuration. Valid values: `enable`, `disable`.
	OverrideAllowaccess pulumi.StringPtrInput
	// Enable to override the extender profile enforce-bandwidth setting. Valid values: `enable`, `disable`.
	OverrideEnforceBandwidth pulumi.StringPtrInput
	// Enable to override the extender profile login-password (administrator password) setting. Valid values: `enable`, `disable`.
	OverrideLoginPasswordChange pulumi.StringPtrInput
	// PPP authentication protocol (PAP,CHAP or auto). Valid values: `auto`, `pap`, `chap`.
	PppAuthProtocol pulumi.StringPtrInput
	// Enable/disable PPP echo request. Valid values: `enable`, `disable`.
	PppEchoRequest pulumi.StringPtrInput
	// PPP password.
	PppPassword pulumi.StringPtrInput
	// PPP username.
	PppUsername pulumi.StringPtrInput
	// Primary HA.
	PrimaryHa pulumi.StringPtrInput
	// FortiExtender profile configuration.
	Profile pulumi.StringPtrInput
	// Monthly quota limit (MB).
	QuotaLimitMb pulumi.IntPtrInput
	// Number of redials allowed based on failed attempts. Valid values: `none`, `1`, `2`, `3`, `4`, `5`, `6`, `7`, `8`, `9`, `10`.
	Redial pulumi.StringPtrInput
	// Redundant interface.
	RedundantIntf pulumi.StringPtrInput
	// Enable/disable MODEM roaming. Valid values: `enable`, `disable`.
	Roaming pulumi.StringPtrInput
	// FortiExtender work role(Primary, Secondary, None). Valid values: `none`, `primary`, `secondary`.
	Role pulumi.StringPtrInput
	// Secondary HA.
	SecondaryHa pulumi.StringPtrInput
	// SIM PIN.
	SimPin pulumi.StringPtrInput
	// VDOM
	Vdom pulumi.IntPtrInput
	// Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
	Vdomparam pulumi.StringPtrInput
	// FortiExtender wan extension configuration. The structure of `wanExtension` block is documented below.
	WanExtension ExtenderWanExtensionPtrInput
	// WiMax authentication protocol(TLS or TTLS). Valid values: `tls`, `ttls`.
	WimaxAuthProtocol pulumi.StringPtrInput
	// WiMax carrier.
	WimaxCarrier pulumi.StringPtrInput
	// WiMax realm.
	WimaxRealm pulumi.StringPtrInput
}

func (ExtenderState) ElementType 

func (ExtenderState) ElementType() reflect.Type

type ExtenderWanExtension 

type ExtenderWanExtension struct {
	// FortiExtender interface name.
	Modem1Extension *string `pulumi:"modem1Extension"`
	// FortiExtender interface name.
	Modem2Extension *string `pulumi:"modem2Extension"`
}

type ExtenderWanExtensionArgs 

type ExtenderWanExtensionArgs struct {
	// FortiExtender interface name.
	Modem1Extension pulumi.StringPtrInput `pulumi:"modem1Extension"`
	// FortiExtender interface name.
	Modem2Extension pulumi.StringPtrInput `pulumi:"modem2Extension"`
}

func (ExtenderWanExtensionArgs) ElementType 

func (ExtenderWanExtensionArgs) ElementType() reflect.Type

func (ExtenderWanExtensionArgs) ToExtenderWanExtensionOutput 

func (i ExtenderWanExtensionArgs) ToExtenderWanExtensionOutput() ExtenderWanExtensionOutput

func (ExtenderWanExtensionArgs) ToExtenderWanExtensionOutputWithContext 

func (i ExtenderWanExtensionArgs) ToExtenderWanExtensionOutputWithContext(ctx context.Context) ExtenderWanExtensionOutput

func (ExtenderWanExtensionArgs) ToExtenderWanExtensionPtrOutput 

func (i ExtenderWanExtensionArgs) ToExtenderWanExtensionPtrOutput() ExtenderWanExtensionPtrOutput

func (ExtenderWanExtensionArgs) ToExtenderWanExtensionPtrOutputWithContext 

func (i ExtenderWanExtensionArgs) ToExtenderWanExtensionPtrOutputWithContext(ctx context.Context) ExtenderWanExtensionPtrOutput

type ExtenderWanExtensionInput 

type ExtenderWanExtensionInput interface {
	pulumi.Input

	ToExtenderWanExtensionOutput() ExtenderWanExtensionOutput
	ToExtenderWanExtensionOutputWithContext(context.Context) ExtenderWanExtensionOutput
}

ExtenderWanExtensionInput is an input type that accepts ExtenderWanExtensionArgs and ExtenderWanExtensionOutput values. You can construct a concrete instance of `ExtenderWanExtensionInput` via: 

ExtenderWanExtensionArgs{...}

type ExtenderWanExtensionOutput 

type ExtenderWanExtensionOutput struct{ *pulumi.OutputState }

func (ExtenderWanExtensionOutput) ElementType 

func (ExtenderWanExtensionOutput) ElementType() reflect.Type

func (ExtenderWanExtensionOutput) Modem1Extension 

func (o ExtenderWanExtensionOutput) Modem1Extension() pulumi.StringPtrOutput

FortiExtender interface name.

func (ExtenderWanExtensionOutput) Modem2Extension 

func (o ExtenderWanExtensionOutput) Modem2Extension() pulumi.StringPtrOutput

FortiExtender interface name.

func (ExtenderWanExtensionOutput) ToExtenderWanExtensionOutput 

func (o ExtenderWanExtensionOutput) ToExtenderWanExtensionOutput() ExtenderWanExtensionOutput

func (ExtenderWanExtensionOutput) ToExtenderWanExtensionOutputWithContext 

func (o ExtenderWanExtensionOutput) ToExtenderWanExtensionOutputWithContext(ctx context.Context) ExtenderWanExtensionOutput

func (ExtenderWanExtensionOutput) ToExtenderWanExtensionPtrOutput 

func (o ExtenderWanExtensionOutput) ToExtenderWanExtensionPtrOutput() ExtenderWanExtensionPtrOutput

func (ExtenderWanExtensionOutput) ToExtenderWanExtensionPtrOutputWithContext 

func (o ExtenderWanExtensionOutput) ToExtenderWanExtensionPtrOutputWithContext(ctx context.Context) ExtenderWanExtensionPtrOutput

type ExtenderWanExtensionPtrInput 

type ExtenderWanExtensionPtrInput interface {
	pulumi.Input

	ToExtenderWanExtensionPtrOutput() ExtenderWanExtensionPtrOutput
	ToExtenderWanExtensionPtrOutputWithContext(context.Context) ExtenderWanExtensionPtrOutput
}

ExtenderWanExtensionPtrInput is an input type that accepts ExtenderWanExtensionArgs, ExtenderWanExtensionPtr and ExtenderWanExtensionPtrOutput values. You can construct a concrete instance of `ExtenderWanExtensionPtrInput` via: 

        ExtenderWanExtensionArgs{...}

or:

        nil

func ExtenderWanExtensionPtr 

func ExtenderWanExtensionPtr(v *ExtenderWanExtensionArgs) ExtenderWanExtensionPtrInput

type ExtenderWanExtensionPtrOutput 

type ExtenderWanExtensionPtrOutput struct{ *pulumi.OutputState }

func (ExtenderWanExtensionPtrOutput) Elem 

func (o ExtenderWanExtensionPtrOutput) Elem() ExtenderWanExtensionOutput

func (ExtenderWanExtensionPtrOutput) ElementType 

func (ExtenderWanExtensionPtrOutput) ElementType() reflect.Type

func (ExtenderWanExtensionPtrOutput) Modem1Extension 

func (o ExtenderWanExtensionPtrOutput) Modem1Extension() pulumi.StringPtrOutput

FortiExtender interface name.

func (ExtenderWanExtensionPtrOutput) Modem2Extension 

func (o ExtenderWanExtensionPtrOutput) Modem2Extension() pulumi.StringPtrOutput

FortiExtender interface name.

func (ExtenderWanExtensionPtrOutput) ToExtenderWanExtensionPtrOutput 

func (o ExtenderWanExtensionPtrOutput) ToExtenderWanExtensionPtrOutput() ExtenderWanExtensionPtrOutput

func (ExtenderWanExtensionPtrOutput) ToExtenderWanExtensionPtrOutputWithContext 

func (o ExtenderWanExtensionPtrOutput) ToExtenderWanExtensionPtrOutputWithContext(ctx context.Context) ExtenderWanExtensionPtrOutput

type Extenderprofile 

type Extenderprofile struct {
	pulumi.CustomResourceState

	// Control management access to the managed extender. Separate entries with a space. Valid values: `ping`, `telnet`, `http`, `https`, `ssh`, `snmp`.
	Allowaccess pulumi.StringOutput `pulumi:"allowaccess"`
	// FortiExtender LAN extension bandwidth limit (Mbps).
	BandwidthLimit pulumi.IntOutput `pulumi:"bandwidthLimit"`
	// FortiExtender cellular configuration. The structure of `cellular` block is documented below.
	Cellular ExtenderprofileCellularOutput `pulumi:"cellular"`
	// Enable/disable enforcement of bandwidth on LAN extension interface. Valid values: `enable`, `disable`.
	EnforceBandwidth pulumi.StringOutput `pulumi:"enforceBandwidth"`
	// Extension option. Valid values: `wan-extension`, `lan-extension`.
	Extension pulumi.StringOutput `pulumi:"extension"`
	// id
	Fosid pulumi.IntOutput `pulumi:"fosid"`
	// Get all sub-tables including unconfigured tables. Do not set this variable to true if you configure sub-table in another resource, otherwise, conflicts and overwrite will occur. Options: [ false, true ]. false: Default value, do not get unconfigured tables; true: get all tables including unconfigured tables.
	GetAllTables pulumi.StringPtrOutput `pulumi:"getAllTables"`
	// FortiExtender lan extension configuration. The structure of `lanExtension` block is documented below.
	LanExtension ExtenderprofileLanExtensionOutput `pulumi:"lanExtension"`
	// Set the managed extender's administrator password.
	LoginPassword pulumi.StringPtrOutput `pulumi:"loginPassword"`
	// Change or reset the administrator password of a managed extender (yes, default, or no, default = no). Valid values: `yes`, `default`, `no`.
	LoginPasswordChange pulumi.StringOutput `pulumi:"loginPasswordChange"`
	// Model.
	Model pulumi.StringOutput `pulumi:"model"`
	// FortiExtender profile name
	Name pulumi.StringOutput `pulumi:"name"`
	// Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
	Vdomparam pulumi.StringOutput `pulumi:"vdomparam"`
}

FortiExtender extender profile configuration. Applies to FortiOS Version `7.0.2,7.0.3,7.0.4,7.0.5,7.0.6,7.0.7,7.0.8,7.0.9,7.0.10,7.0.11,7.0.12,7.0.13,7.0.14,7.0.15,7.2.0`.

## Import

ExtenderController ExtenderProfile can be imported using any of these accepted formats:

```sh $ pulumi import fortios:extendercontroller/extenderprofile:Extenderprofile labelname {{name}} ```

If you do not want to import arguments of block:

$ export "FORTIOS_IMPORT_TABLE"="false"

```sh $ pulumi import fortios:extendercontroller/extenderprofile:Extenderprofile labelname {{name}} ```

$ unset "FORTIOS_IMPORT_TABLE"

func GetExtenderprofile 

func GetExtenderprofile(ctx *pulumi.Context,
	name string, id pulumi.IDInput, state *ExtenderprofileState, opts ...pulumi.ResourceOption) (*Extenderprofile, error)

GetExtenderprofile gets an existing Extenderprofile resource's state with the given name, ID, and optional state properties that are used to uniquely qualify the lookup (nil if not required).

func NewExtenderprofile 

func NewExtenderprofile(ctx *pulumi.Context,
	name string, args *ExtenderprofileArgs, opts ...pulumi.ResourceOption) (*Extenderprofile, error)

NewExtenderprofile registers a new resource with the given unique name, arguments, and options.

func (*Extenderprofile) ElementType 

func (*Extenderprofile) ElementType() reflect.Type

func (*Extenderprofile) ToExtenderprofileOutput 

func (i *Extenderprofile) ToExtenderprofileOutput() ExtenderprofileOutput

func (*Extenderprofile) ToExtenderprofileOutputWithContext 

func (i *Extenderprofile) ToExtenderprofileOutputWithContext(ctx context.Context) ExtenderprofileOutput

type ExtenderprofileArgs 

type ExtenderprofileArgs struct {
	// Control management access to the managed extender. Separate entries with a space. Valid values: `ping`, `telnet`, `http`, `https`, `ssh`, `snmp`.
	Allowaccess pulumi.StringPtrInput
	// FortiExtender LAN extension bandwidth limit (Mbps).
	BandwidthLimit pulumi.IntPtrInput
	// FortiExtender cellular configuration. The structure of `cellular` block is documented below.
	Cellular ExtenderprofileCellularPtrInput
	// Enable/disable enforcement of bandwidth on LAN extension interface. Valid values: `enable`, `disable`.
	EnforceBandwidth pulumi.StringPtrInput
	// Extension option. Valid values: `wan-extension`, `lan-extension`.
	Extension pulumi.StringPtrInput
	// id
	Fosid pulumi.IntPtrInput
	// Get all sub-tables including unconfigured tables. Do not set this variable to true if you configure sub-table in another resource, otherwise, conflicts and overwrite will occur. Options: [ false, true ]. false: Default value, do not get unconfigured tables; true: get all tables including unconfigured tables.
	GetAllTables pulumi.StringPtrInput
	// FortiExtender lan extension configuration. The structure of `lanExtension` block is documented below.
	LanExtension ExtenderprofileLanExtensionPtrInput
	// Set the managed extender's administrator password.
	LoginPassword pulumi.StringPtrInput
	// Change or reset the administrator password of a managed extender (yes, default, or no, default = no). Valid values: `yes`, `default`, `no`.
	LoginPasswordChange pulumi.StringPtrInput
	// Model.
	Model pulumi.StringPtrInput
	// FortiExtender profile name
	Name pulumi.StringPtrInput
	// Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
	Vdomparam pulumi.StringPtrInput
}

The set of arguments for constructing a Extenderprofile resource.

func (ExtenderprofileArgs) ElementType 

func (ExtenderprofileArgs) ElementType() reflect.Type

type ExtenderprofileArray 

type ExtenderprofileArray []ExtenderprofileInput

func (ExtenderprofileArray) ElementType 

func (ExtenderprofileArray) ElementType() reflect.Type

func (ExtenderprofileArray) ToExtenderprofileArrayOutput 

func (i ExtenderprofileArray) ToExtenderprofileArrayOutput() ExtenderprofileArrayOutput

func (ExtenderprofileArray) ToExtenderprofileArrayOutputWithContext 

func (i ExtenderprofileArray) ToExtenderprofileArrayOutputWithContext(ctx context.Context) ExtenderprofileArrayOutput

type ExtenderprofileArrayInput 

type ExtenderprofileArrayInput interface {
	pulumi.Input

	ToExtenderprofileArrayOutput() ExtenderprofileArrayOutput
	ToExtenderprofileArrayOutputWithContext(context.Context) ExtenderprofileArrayOutput
}

ExtenderprofileArrayInput is an input type that accepts ExtenderprofileArray and ExtenderprofileArrayOutput values. You can construct a concrete instance of `ExtenderprofileArrayInput` via: 

ExtenderprofileArray{ ExtenderprofileArgs{...} }

type ExtenderprofileArrayOutput 

type ExtenderprofileArrayOutput struct{ *pulumi.OutputState }

func (ExtenderprofileArrayOutput) ElementType 

func (ExtenderprofileArrayOutput) ElementType() reflect.Type

func (ExtenderprofileArrayOutput) Index 

func (o ExtenderprofileArrayOutput) Index(i pulumi.IntInput) ExtenderprofileOutput

func (ExtenderprofileArrayOutput) ToExtenderprofileArrayOutput 

func (o ExtenderprofileArrayOutput) ToExtenderprofileArrayOutput() ExtenderprofileArrayOutput

func (ExtenderprofileArrayOutput) ToExtenderprofileArrayOutputWithContext 

func (o ExtenderprofileArrayOutput) ToExtenderprofileArrayOutputWithContext(ctx context.Context) ExtenderprofileArrayOutput

type ExtenderprofileCellular 

type ExtenderprofileCellular struct {
	// FortiExtender controller report configuration. The structure of `controllerReport` block is documented below.
	ControllerReport *ExtenderprofileCellularControllerReport `pulumi:"controllerReport"`
	// Dataplan names. The structure of `dataplan` block is documented below.
	Dataplans []ExtenderprofileCellularDataplan `pulumi:"dataplans"`
	// Configuration options for modem 1. The structure of `modem1` block is documented below.
	Modem1 *ExtenderprofileCellularModem1 `pulumi:"modem1"`
	// Configuration options for modem 2. The structure of `modem2` block is documented below.
	Modem2 *ExtenderprofileCellularModem2 `pulumi:"modem2"`
	// FortiExtender cellular SMS notification configuration. The structure of `smsNotification` block is documented below.
	SmsNotification *ExtenderprofileCellularSmsNotification `pulumi:"smsNotification"`
}

type ExtenderprofileCellularArgs 

type ExtenderprofileCellularArgs struct {
	// FortiExtender controller report configuration. The structure of `controllerReport` block is documented below.
	ControllerReport ExtenderprofileCellularControllerReportPtrInput `pulumi:"controllerReport"`
	// Dataplan names. The structure of `dataplan` block is documented below.
	Dataplans ExtenderprofileCellularDataplanArrayInput `pulumi:"dataplans"`
	// Configuration options for modem 1. The structure of `modem1` block is documented below.
	Modem1 ExtenderprofileCellularModem1PtrInput `pulumi:"modem1"`
	// Configuration options for modem 2. The structure of `modem2` block is documented below.
	Modem2 ExtenderprofileCellularModem2PtrInput `pulumi:"modem2"`
	// FortiExtender cellular SMS notification configuration. The structure of `smsNotification` block is documented below.
	SmsNotification ExtenderprofileCellularSmsNotificationPtrInput `pulumi:"smsNotification"`
}

func (ExtenderprofileCellularArgs) ElementType 

func (ExtenderprofileCellularArgs) ElementType() reflect.Type

func (ExtenderprofileCellularArgs) ToExtenderprofileCellularOutput 

func (i ExtenderprofileCellularArgs) ToExtenderprofileCellularOutput() ExtenderprofileCellularOutput

func (ExtenderprofileCellularArgs) ToExtenderprofileCellularOutputWithContext 

func (i ExtenderprofileCellularArgs) ToExtenderprofileCellularOutputWithContext(ctx context.Context) ExtenderprofileCellularOutput

func (ExtenderprofileCellularArgs) ToExtenderprofileCellularPtrOutput 

func (i ExtenderprofileCellularArgs) ToExtenderprofileCellularPtrOutput() ExtenderprofileCellularPtrOutput

func (ExtenderprofileCellularArgs) ToExtenderprofileCellularPtrOutputWithContext 

func (i ExtenderprofileCellularArgs) ToExtenderprofileCellularPtrOutputWithContext(ctx context.Context) ExtenderprofileCellularPtrOutput

type ExtenderprofileCellularControllerReport 

type ExtenderprofileCellularControllerReport struct {
	// Controller report interval.
	Interval *int `pulumi:"interval"`
	// Controller report signal threshold.
	SignalThreshold *int `pulumi:"signalThreshold"`
	// FortiExtender controller report status. Valid values: `disable`, `enable`.
	Status *string `pulumi:"status"`
}

type ExtenderprofileCellularControllerReportArgs 

type ExtenderprofileCellularControllerReportArgs struct {
	// Controller report interval.
	Interval pulumi.IntPtrInput `pulumi:"interval"`
	// Controller report signal threshold.
	SignalThreshold pulumi.IntPtrInput `pulumi:"signalThreshold"`
	// FortiExtender controller report status. Valid values: `disable`, `enable`.
	Status pulumi.StringPtrInput `pulumi:"status"`
}

func (ExtenderprofileCellularControllerReportArgs) ElementType 

func (ExtenderprofileCellularControllerReportArgs) ElementType() reflect.Type

func (ExtenderprofileCellularControllerReportArgs) ToExtenderprofileCellularControllerReportOutput 

func (i ExtenderprofileCellularControllerReportArgs) ToExtenderprofileCellularControllerReportOutput() ExtenderprofileCellularControllerReportOutput

func (ExtenderprofileCellularControllerReportArgs) ToExtenderprofileCellularControllerReportOutputWithContext 

func (i ExtenderprofileCellularControllerReportArgs) ToExtenderprofileCellularControllerReportOutputWithContext(ctx context.Context) ExtenderprofileCellularControllerReportOutput

func (ExtenderprofileCellularControllerReportArgs) ToExtenderprofileCellularControllerReportPtrOutput 

func (i ExtenderprofileCellularControllerReportArgs) ToExtenderprofileCellularControllerReportPtrOutput() ExtenderprofileCellularControllerReportPtrOutput

func (ExtenderprofileCellularControllerReportArgs) ToExtenderprofileCellularControllerReportPtrOutputWithContext 

func (i ExtenderprofileCellularControllerReportArgs) ToExtenderprofileCellularControllerReportPtrOutputWithContext(ctx context.Context) ExtenderprofileCellularControllerReportPtrOutput

type ExtenderprofileCellularControllerReportInput 

type ExtenderprofileCellularControllerReportInput interface {
	pulumi.Input

	ToExtenderprofileCellularControllerReportOutput() ExtenderprofileCellularControllerReportOutput
	ToExtenderprofileCellularControllerReportOutputWithContext(context.Context) ExtenderprofileCellularControllerReportOutput
}

ExtenderprofileCellularControllerReportInput is an input type that accepts ExtenderprofileCellularControllerReportArgs and ExtenderprofileCellularControllerReportOutput values. You can construct a concrete instance of `ExtenderprofileCellularControllerReportInput` via: 

ExtenderprofileCellularControllerReportArgs{...}

type ExtenderprofileCellularControllerReportOutput 

type ExtenderprofileCellularControllerReportOutput struct{ *pulumi.OutputState }

func (ExtenderprofileCellularControllerReportOutput) ElementType 

func (ExtenderprofileCellularControllerReportOutput) ElementType() reflect.Type

func (ExtenderprofileCellularControllerReportOutput) Interval 

func (o ExtenderprofileCellularControllerReportOutput) Interval() pulumi.IntPtrOutput

Controller report interval.

func (ExtenderprofileCellularControllerReportOutput) SignalThreshold 

func (o ExtenderprofileCellularControllerReportOutput) SignalThreshold() pulumi.IntPtrOutput

Controller report signal threshold.

func (ExtenderprofileCellularControllerReportOutput) Status 

func (o ExtenderprofileCellularControllerReportOutput) Status() pulumi.StringPtrOutput

FortiExtender controller report status. Valid values: `disable`, `enable`.

func (ExtenderprofileCellularControllerReportOutput) ToExtenderprofileCellularControllerReportOutput 

func (o ExtenderprofileCellularControllerReportOutput) ToExtenderprofileCellularControllerReportOutput() ExtenderprofileCellularControllerReportOutput

func (ExtenderprofileCellularControllerReportOutput) ToExtenderprofileCellularControllerReportOutputWithContext 

func (o ExtenderprofileCellularControllerReportOutput) ToExtenderprofileCellularControllerReportOutputWithContext(ctx context.Context) ExtenderprofileCellularControllerReportOutput

func (ExtenderprofileCellularControllerReportOutput) ToExtenderprofileCellularControllerReportPtrOutput 

func (o ExtenderprofileCellularControllerReportOutput) ToExtenderprofileCellularControllerReportPtrOutput() ExtenderprofileCellularControllerReportPtrOutput

func (ExtenderprofileCellularControllerReportOutput) ToExtenderprofileCellularControllerReportPtrOutputWithContext 

func (o ExtenderprofileCellularControllerReportOutput) ToExtenderprofileCellularControllerReportPtrOutputWithContext(ctx context.Context) ExtenderprofileCellularControllerReportPtrOutput

type ExtenderprofileCellularControllerReportPtrInput 

type ExtenderprofileCellularControllerReportPtrInput interface {
	pulumi.Input

	ToExtenderprofileCellularControllerReportPtrOutput() ExtenderprofileCellularControllerReportPtrOutput
	ToExtenderprofileCellularControllerReportPtrOutputWithContext(context.Context) ExtenderprofileCellularControllerReportPtrOutput
}

ExtenderprofileCellularControllerReportPtrInput is an input type that accepts ExtenderprofileCellularControllerReportArgs, ExtenderprofileCellularControllerReportPtr and ExtenderprofileCellularControllerReportPtrOutput values. You can construct a concrete instance of `ExtenderprofileCellularControllerReportPtrInput` via: 

        ExtenderprofileCellularControllerReportArgs{...}

or:

        nil

func ExtenderprofileCellularControllerReportPtr 

func ExtenderprofileCellularControllerReportPtr(v *ExtenderprofileCellularControllerReportArgs) ExtenderprofileCellularControllerReportPtrInput

type ExtenderprofileCellularControllerReportPtrOutput 

type ExtenderprofileCellularControllerReportPtrOutput struct{ *pulumi.OutputState }

func (ExtenderprofileCellularControllerReportPtrOutput) Elem 

func (o ExtenderprofileCellularControllerReportPtrOutput) Elem() ExtenderprofileCellularControllerReportOutput

func (ExtenderprofileCellularControllerReportPtrOutput) ElementType 

func (ExtenderprofileCellularControllerReportPtrOutput) ElementType() reflect.Type

func (ExtenderprofileCellularControllerReportPtrOutput) Interval 

func (o ExtenderprofileCellularControllerReportPtrOutput) Interval() pulumi.IntPtrOutput

Controller report interval.

func (ExtenderprofileCellularControllerReportPtrOutput) SignalThreshold 

func (o ExtenderprofileCellularControllerReportPtrOutput) SignalThreshold() pulumi.IntPtrOutput

Controller report signal threshold.

func (ExtenderprofileCellularControllerReportPtrOutput) Status 

func (o ExtenderprofileCellularControllerReportPtrOutput) Status() pulumi.StringPtrOutput

FortiExtender controller report status. Valid values: `disable`, `enable`.

func (ExtenderprofileCellularControllerReportPtrOutput) ToExtenderprofileCellularControllerReportPtrOutput 

func (o ExtenderprofileCellularControllerReportPtrOutput) ToExtenderprofileCellularControllerReportPtrOutput() ExtenderprofileCellularControllerReportPtrOutput

func (ExtenderprofileCellularControllerReportPtrOutput) ToExtenderprofileCellularControllerReportPtrOutputWithContext 

func (o ExtenderprofileCellularControllerReportPtrOutput) ToExtenderprofileCellularControllerReportPtrOutputWithContext(ctx context.Context) ExtenderprofileCellularControllerReportPtrOutput

type ExtenderprofileCellularDataplan 

type ExtenderprofileCellularDataplan struct {
	// Dataplan name.
	Name *string `pulumi:"name"`
}

type ExtenderprofileCellularDataplanArgs 

type ExtenderprofileCellularDataplanArgs struct {
	// Dataplan name.
	Name pulumi.StringPtrInput `pulumi:"name"`
}

func (ExtenderprofileCellularDataplanArgs) ElementType 

func (ExtenderprofileCellularDataplanArgs) ElementType() reflect.Type

func (ExtenderprofileCellularDataplanArgs) ToExtenderprofileCellularDataplanOutput 

func (i ExtenderprofileCellularDataplanArgs) ToExtenderprofileCellularDataplanOutput() ExtenderprofileCellularDataplanOutput

func (ExtenderprofileCellularDataplanArgs) ToExtenderprofileCellularDataplanOutputWithContext 

func (i ExtenderprofileCellularDataplanArgs) ToExtenderprofileCellularDataplanOutputWithContext(ctx context.Context) ExtenderprofileCellularDataplanOutput

type ExtenderprofileCellularDataplanArray 

type ExtenderprofileCellularDataplanArray []ExtenderprofileCellularDataplanInput

func (ExtenderprofileCellularDataplanArray) ElementType 

func (ExtenderprofileCellularDataplanArray) ElementType() reflect.Type

func (ExtenderprofileCellularDataplanArray) ToExtenderprofileCellularDataplanArrayOutput 

func (i ExtenderprofileCellularDataplanArray) ToExtenderprofileCellularDataplanArrayOutput() ExtenderprofileCellularDataplanArrayOutput

func (ExtenderprofileCellularDataplanArray) ToExtenderprofileCellularDataplanArrayOutputWithContext 

func (i ExtenderprofileCellularDataplanArray) ToExtenderprofileCellularDataplanArrayOutputWithContext(ctx context.Context) ExtenderprofileCellularDataplanArrayOutput

type ExtenderprofileCellularDataplanArrayInput 

type ExtenderprofileCellularDataplanArrayInput interface {
	pulumi.Input

	ToExtenderprofileCellularDataplanArrayOutput() ExtenderprofileCellularDataplanArrayOutput
	ToExtenderprofileCellularDataplanArrayOutputWithContext(context.Context) ExtenderprofileCellularDataplanArrayOutput
}

ExtenderprofileCellularDataplanArrayInput is an input type that accepts ExtenderprofileCellularDataplanArray and ExtenderprofileCellularDataplanArrayOutput values. You can construct a concrete instance of `ExtenderprofileCellularDataplanArrayInput` via: 

ExtenderprofileCellularDataplanArray{ ExtenderprofileCellularDataplanArgs{...} }

type ExtenderprofileCellularDataplanArrayOutput 

type ExtenderprofileCellularDataplanArrayOutput struct{ *pulumi.OutputState }

func (ExtenderprofileCellularDataplanArrayOutput) ElementType 

func (ExtenderprofileCellularDataplanArrayOutput) ElementType() reflect.Type

func (ExtenderprofileCellularDataplanArrayOutput) Index 

func (o ExtenderprofileCellularDataplanArrayOutput) Index(i pulumi.IntInput) ExtenderprofileCellularDataplanOutput

func (ExtenderprofileCellularDataplanArrayOutput) ToExtenderprofileCellularDataplanArrayOutput 

func (o ExtenderprofileCellularDataplanArrayOutput) ToExtenderprofileCellularDataplanArrayOutput() ExtenderprofileCellularDataplanArrayOutput

func (ExtenderprofileCellularDataplanArrayOutput) ToExtenderprofileCellularDataplanArrayOutputWithContext 

func (o ExtenderprofileCellularDataplanArrayOutput) ToExtenderprofileCellularDataplanArrayOutputWithContext(ctx context.Context) ExtenderprofileCellularDataplanArrayOutput

type ExtenderprofileCellularDataplanInput 

type ExtenderprofileCellularDataplanInput interface {
	pulumi.Input

	ToExtenderprofileCellularDataplanOutput() ExtenderprofileCellularDataplanOutput
	ToExtenderprofileCellularDataplanOutputWithContext(context.Context) ExtenderprofileCellularDataplanOutput
}

ExtenderprofileCellularDataplanInput is an input type that accepts ExtenderprofileCellularDataplanArgs and ExtenderprofileCellularDataplanOutput values. You can construct a concrete instance of `ExtenderprofileCellularDataplanInput` via: 

ExtenderprofileCellularDataplanArgs{...}

type ExtenderprofileCellularDataplanOutput 

type ExtenderprofileCellularDataplanOutput struct{ *pulumi.OutputState }

func (ExtenderprofileCellularDataplanOutput) ElementType 

func (ExtenderprofileCellularDataplanOutput) ElementType() reflect.Type

func (ExtenderprofileCellularDataplanOutput) Name 

func (o ExtenderprofileCellularDataplanOutput) Name() pulumi.StringPtrOutput

Dataplan name.

func (ExtenderprofileCellularDataplanOutput) ToExtenderprofileCellularDataplanOutput 

func (o ExtenderprofileCellularDataplanOutput) ToExtenderprofileCellularDataplanOutput() ExtenderprofileCellularDataplanOutput

func (ExtenderprofileCellularDataplanOutput) ToExtenderprofileCellularDataplanOutputWithContext 

func (o ExtenderprofileCellularDataplanOutput) ToExtenderprofileCellularDataplanOutputWithContext(ctx context.Context) ExtenderprofileCellularDataplanOutput

type ExtenderprofileCellularInput 

type ExtenderprofileCellularInput interface {
	pulumi.Input

	ToExtenderprofileCellularOutput() ExtenderprofileCellularOutput
	ToExtenderprofileCellularOutputWithContext(context.Context) ExtenderprofileCellularOutput
}

ExtenderprofileCellularInput is an input type that accepts ExtenderprofileCellularArgs and ExtenderprofileCellularOutput values. You can construct a concrete instance of `ExtenderprofileCellularInput` via: 

ExtenderprofileCellularArgs{...}

type ExtenderprofileCellularModem1 

type ExtenderprofileCellularModem1 struct {
	AutoSwitch       *ExtenderprofileCellularModem1AutoSwitch `pulumi:"autoSwitch"`
	ConnStatus       *int                                     `pulumi:"connStatus"`
	DefaultSim       *string                                  `pulumi:"defaultSim"`
	Gps              *string                                  `pulumi:"gps"`
	PreferredCarrier *string                                  `pulumi:"preferredCarrier"`
	RedundantIntf    *string                                  `pulumi:"redundantIntf"`
	RedundantMode    *string                                  `pulumi:"redundantMode"`
	Sim1Pin          *string                                  `pulumi:"sim1Pin"`
	Sim1PinCode      *string                                  `pulumi:"sim1PinCode"`
	Sim2Pin          *string                                  `pulumi:"sim2Pin"`
	Sim2PinCode      *string                                  `pulumi:"sim2PinCode"`
}

type ExtenderprofileCellularModem1Args 

type ExtenderprofileCellularModem1Args struct {
	AutoSwitch       ExtenderprofileCellularModem1AutoSwitchPtrInput `pulumi:"autoSwitch"`
	ConnStatus       pulumi.IntPtrInput                              `pulumi:"connStatus"`
	DefaultSim       pulumi.StringPtrInput                           `pulumi:"defaultSim"`
	Gps              pulumi.StringPtrInput                           `pulumi:"gps"`
	PreferredCarrier pulumi.StringPtrInput                           `pulumi:"preferredCarrier"`
	RedundantIntf    pulumi.StringPtrInput                           `pulumi:"redundantIntf"`
	RedundantMode    pulumi.StringPtrInput                           `pulumi:"redundantMode"`
	Sim1Pin          pulumi.StringPtrInput                           `pulumi:"sim1Pin"`
	Sim1PinCode      pulumi.StringPtrInput                           `pulumi:"sim1PinCode"`
	Sim2Pin          pulumi.StringPtrInput                           `pulumi:"sim2Pin"`
	Sim2PinCode      pulumi.StringPtrInput                           `pulumi:"sim2PinCode"`
}

func (ExtenderprofileCellularModem1Args) ElementType 

func (ExtenderprofileCellularModem1Args) ElementType() reflect.Type

func (ExtenderprofileCellularModem1Args) ToExtenderprofileCellularModem1Output 

func (i ExtenderprofileCellularModem1Args) ToExtenderprofileCellularModem1Output() ExtenderprofileCellularModem1Output

func (ExtenderprofileCellularModem1Args) ToExtenderprofileCellularModem1OutputWithContext 

func (i ExtenderprofileCellularModem1Args) ToExtenderprofileCellularModem1OutputWithContext(ctx context.Context) ExtenderprofileCellularModem1Output

func (ExtenderprofileCellularModem1Args) ToExtenderprofileCellularModem1PtrOutput 

func (i ExtenderprofileCellularModem1Args) ToExtenderprofileCellularModem1PtrOutput() ExtenderprofileCellularModem1PtrOutput

func (ExtenderprofileCellularModem1Args) ToExtenderprofileCellularModem1PtrOutputWithContext 

func (i ExtenderprofileCellularModem1Args) ToExtenderprofileCellularModem1PtrOutputWithContext(ctx context.Context) ExtenderprofileCellularModem1PtrOutput

type ExtenderprofileCellularModem1AutoSwitch 

type ExtenderprofileCellularModem1AutoSwitch struct {
	// Automatically switch based on data usage. Valid values: `disable`, `enable`.
	Dataplan *string `pulumi:"dataplan"`
	// Auto switch by disconnect. Valid values: `disable`, `enable`.
	Disconnect *string `pulumi:"disconnect"`
	// Automatically switch based on disconnect period.
	DisconnectPeriod *int `pulumi:"disconnectPeriod"`
	// Automatically switch based on disconnect threshold.
	DisconnectThreshold *int `pulumi:"disconnectThreshold"`
	// Automatically switch based on signal strength. Valid values: `disable`, `enable`.
	Signal *string `pulumi:"signal"`
	// Auto switch with switch back multi-options. Valid values: `time`, `timer`.
	SwitchBack *string `pulumi:"switchBack"`
	// Automatically switch over to preferred SIM/carrier at a specified time in UTC (HH:MM).
	SwitchBackTime *string `pulumi:"switchBackTime"`
	// Automatically switch over to preferred SIM/carrier after the given time (3600 - 2147483647 sec).
	SwitchBackTimer *int `pulumi:"switchBackTimer"`
}

type ExtenderprofileCellularModem1AutoSwitchArgs 

type ExtenderprofileCellularModem1AutoSwitchArgs struct {
	// Automatically switch based on data usage. Valid values: `disable`, `enable`.
	Dataplan pulumi.StringPtrInput `pulumi:"dataplan"`
	// Auto switch by disconnect. Valid values: `disable`, `enable`.
	Disconnect pulumi.StringPtrInput `pulumi:"disconnect"`
	// Automatically switch based on disconnect period.
	DisconnectPeriod pulumi.IntPtrInput `pulumi:"disconnectPeriod"`
	// Automatically switch based on disconnect threshold.
	DisconnectThreshold pulumi.IntPtrInput `pulumi:"disconnectThreshold"`
	// Automatically switch based on signal strength. Valid values: `disable`, `enable`.
	Signal pulumi.StringPtrInput `pulumi:"signal"`
	// Auto switch with switch back multi-options. Valid values: `time`, `timer`.
	SwitchBack pulumi.StringPtrInput `pulumi:"switchBack"`
	// Automatically switch over to preferred SIM/carrier at a specified time in UTC (HH:MM).
	SwitchBackTime pulumi.StringPtrInput `pulumi:"switchBackTime"`
	// Automatically switch over to preferred SIM/carrier after the given time (3600 - 2147483647 sec).
	SwitchBackTimer pulumi.IntPtrInput `pulumi:"switchBackTimer"`
}

func (ExtenderprofileCellularModem1AutoSwitchArgs) ElementType 

func (ExtenderprofileCellularModem1AutoSwitchArgs) ElementType() reflect.Type

func (ExtenderprofileCellularModem1AutoSwitchArgs) ToExtenderprofileCellularModem1AutoSwitchOutput 

func (i ExtenderprofileCellularModem1AutoSwitchArgs) ToExtenderprofileCellularModem1AutoSwitchOutput() ExtenderprofileCellularModem1AutoSwitchOutput

func (ExtenderprofileCellularModem1AutoSwitchArgs) ToExtenderprofileCellularModem1AutoSwitchOutputWithContext 

func (i ExtenderprofileCellularModem1AutoSwitchArgs) ToExtenderprofileCellularModem1AutoSwitchOutputWithContext(ctx context.Context) ExtenderprofileCellularModem1AutoSwitchOutput

func (ExtenderprofileCellularModem1AutoSwitchArgs) ToExtenderprofileCellularModem1AutoSwitchPtrOutput 

func (i ExtenderprofileCellularModem1AutoSwitchArgs) ToExtenderprofileCellularModem1AutoSwitchPtrOutput() ExtenderprofileCellularModem1AutoSwitchPtrOutput

func (ExtenderprofileCellularModem1AutoSwitchArgs) ToExtenderprofileCellularModem1AutoSwitchPtrOutputWithContext 

func (i ExtenderprofileCellularModem1AutoSwitchArgs) ToExtenderprofileCellularModem1AutoSwitchPtrOutputWithContext(ctx context.Context) ExtenderprofileCellularModem1AutoSwitchPtrOutput

type ExtenderprofileCellularModem1AutoSwitchInput 

type ExtenderprofileCellularModem1AutoSwitchInput interface {
	pulumi.Input

	ToExtenderprofileCellularModem1AutoSwitchOutput() ExtenderprofileCellularModem1AutoSwitchOutput
	ToExtenderprofileCellularModem1AutoSwitchOutputWithContext(context.Context) ExtenderprofileCellularModem1AutoSwitchOutput
}

ExtenderprofileCellularModem1AutoSwitchInput is an input type that accepts ExtenderprofileCellularModem1AutoSwitchArgs and ExtenderprofileCellularModem1AutoSwitchOutput values. You can construct a concrete instance of `ExtenderprofileCellularModem1AutoSwitchInput` via: 

ExtenderprofileCellularModem1AutoSwitchArgs{...}

type ExtenderprofileCellularModem1AutoSwitchOutput 

type ExtenderprofileCellularModem1AutoSwitchOutput struct{ *pulumi.OutputState }

func (ExtenderprofileCellularModem1AutoSwitchOutput) Dataplan 

func (o ExtenderprofileCellularModem1AutoSwitchOutput) Dataplan() pulumi.StringPtrOutput

Automatically switch based on data usage. Valid values: `disable`, `enable`.

func (ExtenderprofileCellularModem1AutoSwitchOutput) Disconnect 

func (o ExtenderprofileCellularModem1AutoSwitchOutput) Disconnect() pulumi.StringPtrOutput

Auto switch by disconnect. Valid values: `disable`, `enable`.

func (ExtenderprofileCellularModem1AutoSwitchOutput) DisconnectPeriod 

func (o ExtenderprofileCellularModem1AutoSwitchOutput) DisconnectPeriod() pulumi.IntPtrOutput

Automatically switch based on disconnect period.

func (ExtenderprofileCellularModem1AutoSwitchOutput) DisconnectThreshold 

func (o ExtenderprofileCellularModem1AutoSwitchOutput) DisconnectThreshold() pulumi.IntPtrOutput

Automatically switch based on disconnect threshold.

func (ExtenderprofileCellularModem1AutoSwitchOutput) ElementType 

func (ExtenderprofileCellularModem1AutoSwitchOutput) ElementType() reflect.Type

func (ExtenderprofileCellularModem1AutoSwitchOutput) Signal 

func (o ExtenderprofileCellularModem1AutoSwitchOutput) Signal() pulumi.StringPtrOutput

Automatically switch based on signal strength. Valid values: `disable`, `enable`.

func (ExtenderprofileCellularModem1AutoSwitchOutput) SwitchBack 

func (o ExtenderprofileCellularModem1AutoSwitchOutput) SwitchBack() pulumi.StringPtrOutput

Auto switch with switch back multi-options. Valid values: `time`, `timer`.

func (ExtenderprofileCellularModem1AutoSwitchOutput) SwitchBackTime 

func (o ExtenderprofileCellularModem1AutoSwitchOutput) SwitchBackTime() pulumi.StringPtrOutput

Automatically switch over to preferred SIM/carrier at a specified time in UTC (HH:MM).

func (ExtenderprofileCellularModem1AutoSwitchOutput) SwitchBackTimer 

func (o ExtenderprofileCellularModem1AutoSwitchOutput) SwitchBackTimer() pulumi.IntPtrOutput

Automatically switch over to preferred SIM/carrier after the given time (3600 - 2147483647 sec).

func (ExtenderprofileCellularModem1AutoSwitchOutput) ToExtenderprofileCellularModem1AutoSwitchOutput 

func (o ExtenderprofileCellularModem1AutoSwitchOutput) ToExtenderprofileCellularModem1AutoSwitchOutput() ExtenderprofileCellularModem1AutoSwitchOutput

func (ExtenderprofileCellularModem1AutoSwitchOutput) ToExtenderprofileCellularModem1AutoSwitchOutputWithContext 

func (o ExtenderprofileCellularModem1AutoSwitchOutput) ToExtenderprofileCellularModem1AutoSwitchOutputWithContext(ctx context.Context) ExtenderprofileCellularModem1AutoSwitchOutput

func (ExtenderprofileCellularModem1AutoSwitchOutput) ToExtenderprofileCellularModem1AutoSwitchPtrOutput 

func (o ExtenderprofileCellularModem1AutoSwitchOutput) ToExtenderprofileCellularModem1AutoSwitchPtrOutput() ExtenderprofileCellularModem1AutoSwitchPtrOutput

func (ExtenderprofileCellularModem1AutoSwitchOutput) ToExtenderprofileCellularModem1AutoSwitchPtrOutputWithContext 

func (o ExtenderprofileCellularModem1AutoSwitchOutput) ToExtenderprofileCellularModem1AutoSwitchPtrOutputWithContext(ctx context.Context) ExtenderprofileCellularModem1AutoSwitchPtrOutput

type ExtenderprofileCellularModem1AutoSwitchPtrInput 

type ExtenderprofileCellularModem1AutoSwitchPtrInput interface {
	pulumi.Input

	ToExtenderprofileCellularModem1AutoSwitchPtrOutput() ExtenderprofileCellularModem1AutoSwitchPtrOutput
	ToExtenderprofileCellularModem1AutoSwitchPtrOutputWithContext(context.Context) ExtenderprofileCellularModem1AutoSwitchPtrOutput
}

ExtenderprofileCellularModem1AutoSwitchPtrInput is an input type that accepts ExtenderprofileCellularModem1AutoSwitchArgs, ExtenderprofileCellularModem1AutoSwitchPtr and ExtenderprofileCellularModem1AutoSwitchPtrOutput values. You can construct a concrete instance of `ExtenderprofileCellularModem1AutoSwitchPtrInput` via: 

        ExtenderprofileCellularModem1AutoSwitchArgs{...}

or:

        nil

func ExtenderprofileCellularModem1AutoSwitchPtr 

func ExtenderprofileCellularModem1AutoSwitchPtr(v *ExtenderprofileCellularModem1AutoSwitchArgs) ExtenderprofileCellularModem1AutoSwitchPtrInput

type ExtenderprofileCellularModem1AutoSwitchPtrOutput 

type ExtenderprofileCellularModem1AutoSwitchPtrOutput struct{ *pulumi.OutputState }

func (ExtenderprofileCellularModem1AutoSwitchPtrOutput) Dataplan 

func (o ExtenderprofileCellularModem1AutoSwitchPtrOutput) Dataplan() pulumi.StringPtrOutput

Automatically switch based on data usage. Valid values: `disable`, `enable`.

func (ExtenderprofileCellularModem1AutoSwitchPtrOutput) Disconnect 

func (o ExtenderprofileCellularModem1AutoSwitchPtrOutput) Disconnect() pulumi.StringPtrOutput

Auto switch by disconnect. Valid values: `disable`, `enable`.

func (ExtenderprofileCellularModem1AutoSwitchPtrOutput) DisconnectPeriod 

func (o ExtenderprofileCellularModem1AutoSwitchPtrOutput) DisconnectPeriod() pulumi.IntPtrOutput

Automatically switch based on disconnect period.

func (ExtenderprofileCellularModem1AutoSwitchPtrOutput) DisconnectThreshold 

func (o ExtenderprofileCellularModem1AutoSwitchPtrOutput) DisconnectThreshold() pulumi.IntPtrOutput

Automatically switch based on disconnect threshold.

func (ExtenderprofileCellularModem1AutoSwitchPtrOutput) Elem 

func (o ExtenderprofileCellularModem1AutoSwitchPtrOutput) Elem() ExtenderprofileCellularModem1AutoSwitchOutput

func (ExtenderprofileCellularModem1AutoSwitchPtrOutput) ElementType 

func (ExtenderprofileCellularModem1AutoSwitchPtrOutput) ElementType() reflect.Type

func (ExtenderprofileCellularModem1AutoSwitchPtrOutput) Signal 

func (o ExtenderprofileCellularModem1AutoSwitchPtrOutput) Signal() pulumi.StringPtrOutput

Automatically switch based on signal strength. Valid values: `disable`, `enable`.

func (ExtenderprofileCellularModem1AutoSwitchPtrOutput) SwitchBack 

func (o ExtenderprofileCellularModem1AutoSwitchPtrOutput) SwitchBack() pulumi.StringPtrOutput

Auto switch with switch back multi-options. Valid values: `time`, `timer`.

func (ExtenderprofileCellularModem1AutoSwitchPtrOutput) SwitchBackTime 

func (o ExtenderprofileCellularModem1AutoSwitchPtrOutput) SwitchBackTime() pulumi.StringPtrOutput

Automatically switch over to preferred SIM/carrier at a specified time in UTC (HH:MM).

func (ExtenderprofileCellularModem1AutoSwitchPtrOutput) SwitchBackTimer 

func (o ExtenderprofileCellularModem1AutoSwitchPtrOutput) SwitchBackTimer() pulumi.IntPtrOutput

Automatically switch over to preferred SIM/carrier after the given time (3600 - 2147483647 sec).

func (ExtenderprofileCellularModem1AutoSwitchPtrOutput) ToExtenderprofileCellularModem1AutoSwitchPtrOutput 

func (o ExtenderprofileCellularModem1AutoSwitchPtrOutput) ToExtenderprofileCellularModem1AutoSwitchPtrOutput() ExtenderprofileCellularModem1AutoSwitchPtrOutput

func (ExtenderprofileCellularModem1AutoSwitchPtrOutput) ToExtenderprofileCellularModem1AutoSwitchPtrOutputWithContext 

func (o ExtenderprofileCellularModem1AutoSwitchPtrOutput) ToExtenderprofileCellularModem1AutoSwitchPtrOutputWithContext(ctx context.Context) ExtenderprofileCellularModem1AutoSwitchPtrOutput

type ExtenderprofileCellularModem1Input 

type ExtenderprofileCellularModem1Input interface {
	pulumi.Input

	ToExtenderprofileCellularModem1Output() ExtenderprofileCellularModem1Output
	ToExtenderprofileCellularModem1OutputWithContext(context.Context) ExtenderprofileCellularModem1Output
}

ExtenderprofileCellularModem1Input is an input type that accepts ExtenderprofileCellularModem1Args and ExtenderprofileCellularModem1Output values. You can construct a concrete instance of `ExtenderprofileCellularModem1Input` via: 

ExtenderprofileCellularModem1Args{...}

type ExtenderprofileCellularModem1Output 

type ExtenderprofileCellularModem1Output struct{ *pulumi.OutputState }

func (ExtenderprofileCellularModem1Output) AutoSwitch 

func (o ExtenderprofileCellularModem1Output) AutoSwitch() ExtenderprofileCellularModem1AutoSwitchPtrOutput

func (ExtenderprofileCellularModem1Output) ConnStatus 

func (o ExtenderprofileCellularModem1Output) ConnStatus() pulumi.IntPtrOutput

func (ExtenderprofileCellularModem1Output) DefaultSim 

func (o ExtenderprofileCellularModem1Output) DefaultSim() pulumi.StringPtrOutput

func (ExtenderprofileCellularModem1Output) ElementType 

func (ExtenderprofileCellularModem1Output) ElementType() reflect.Type

func (ExtenderprofileCellularModem1Output) Gps 

func (o ExtenderprofileCellularModem1Output) Gps() pulumi.StringPtrOutput

func (ExtenderprofileCellularModem1Output) PreferredCarrier 

func (o ExtenderprofileCellularModem1Output) PreferredCarrier() pulumi.StringPtrOutput

func (ExtenderprofileCellularModem1Output) RedundantIntf 

func (o ExtenderprofileCellularModem1Output) RedundantIntf() pulumi.StringPtrOutput

func (ExtenderprofileCellularModem1Output) RedundantMode 

func (o ExtenderprofileCellularModem1Output) RedundantMode() pulumi.StringPtrOutput

func (ExtenderprofileCellularModem1Output) Sim1Pin 

func (o ExtenderprofileCellularModem1Output) Sim1Pin() pulumi.StringPtrOutput

func (ExtenderprofileCellularModem1Output) Sim1PinCode 

func (o ExtenderprofileCellularModem1Output) Sim1PinCode() pulumi.StringPtrOutput

func (ExtenderprofileCellularModem1Output) Sim2Pin 

func (o ExtenderprofileCellularModem1Output) Sim2Pin() pulumi.StringPtrOutput

func (ExtenderprofileCellularModem1Output) Sim2PinCode 

func (o ExtenderprofileCellularModem1Output) Sim2PinCode() pulumi.StringPtrOutput

func (ExtenderprofileCellularModem1Output) ToExtenderprofileCellularModem1Output 

func (o ExtenderprofileCellularModem1Output) ToExtenderprofileCellularModem1Output() ExtenderprofileCellularModem1Output

func (ExtenderprofileCellularModem1Output) ToExtenderprofileCellularModem1OutputWithContext 

func (o ExtenderprofileCellularModem1Output) ToExtenderprofileCellularModem1OutputWithContext(ctx context.Context) ExtenderprofileCellularModem1Output

func (ExtenderprofileCellularModem1Output) ToExtenderprofileCellularModem1PtrOutput 

func (o ExtenderprofileCellularModem1Output) ToExtenderprofileCellularModem1PtrOutput() ExtenderprofileCellularModem1PtrOutput

func (ExtenderprofileCellularModem1Output) ToExtenderprofileCellularModem1PtrOutputWithContext 

func (o ExtenderprofileCellularModem1Output) ToExtenderprofileCellularModem1PtrOutputWithContext(ctx context.Context) ExtenderprofileCellularModem1PtrOutput

type ExtenderprofileCellularModem1PtrInput 

type ExtenderprofileCellularModem1PtrInput interface {
	pulumi.Input

	ToExtenderprofileCellularModem1PtrOutput() ExtenderprofileCellularModem1PtrOutput
	ToExtenderprofileCellularModem1PtrOutputWithContext(context.Context) ExtenderprofileCellularModem1PtrOutput
}

ExtenderprofileCellularModem1PtrInput is an input type that accepts ExtenderprofileCellularModem1Args, ExtenderprofileCellularModem1Ptr and ExtenderprofileCellularModem1PtrOutput values. You can construct a concrete instance of `ExtenderprofileCellularModem1PtrInput` via: 

        ExtenderprofileCellularModem1Args{...}

or:

        nil

func ExtenderprofileCellularModem1Ptr 

func ExtenderprofileCellularModem1Ptr(v *ExtenderprofileCellularModem1Args) ExtenderprofileCellularModem1PtrInput

type ExtenderprofileCellularModem1PtrOutput 

type ExtenderprofileCellularModem1PtrOutput struct{ *pulumi.OutputState }

func (ExtenderprofileCellularModem1PtrOutput) AutoSwitch 

func (o ExtenderprofileCellularModem1PtrOutput) AutoSwitch() ExtenderprofileCellularModem1AutoSwitchPtrOutput

func (ExtenderprofileCellularModem1PtrOutput) ConnStatus 

func (o ExtenderprofileCellularModem1PtrOutput) ConnStatus() pulumi.IntPtrOutput

func (ExtenderprofileCellularModem1PtrOutput) DefaultSim 

func (o ExtenderprofileCellularModem1PtrOutput) DefaultSim() pulumi.StringPtrOutput

func (ExtenderprofileCellularModem1PtrOutput) Elem 

func (o ExtenderprofileCellularModem1PtrOutput) Elem() ExtenderprofileCellularModem1Output

func (ExtenderprofileCellularModem1PtrOutput) ElementType 

func (ExtenderprofileCellularModem1PtrOutput) ElementType() reflect.Type

func (ExtenderprofileCellularModem1PtrOutput) Gps 

func (o ExtenderprofileCellularModem1PtrOutput) Gps() pulumi.StringPtrOutput

func (ExtenderprofileCellularModem1PtrOutput) PreferredCarrier 

func (o ExtenderprofileCellularModem1PtrOutput) PreferredCarrier() pulumi.StringPtrOutput

func (ExtenderprofileCellularModem1PtrOutput) RedundantIntf 

func (o ExtenderprofileCellularModem1PtrOutput) RedundantIntf() pulumi.StringPtrOutput

func (ExtenderprofileCellularModem1PtrOutput) RedundantMode 

func (o ExtenderprofileCellularModem1PtrOutput) RedundantMode() pulumi.StringPtrOutput

func (ExtenderprofileCellularModem1PtrOutput) Sim1Pin 

func (o ExtenderprofileCellularModem1PtrOutput) Sim1Pin() pulumi.StringPtrOutput

func (ExtenderprofileCellularModem1PtrOutput) Sim1PinCode 

func (o ExtenderprofileCellularModem1PtrOutput) Sim1PinCode() pulumi.StringPtrOutput

func (ExtenderprofileCellularModem1PtrOutput) Sim2Pin 

func (o ExtenderprofileCellularModem1PtrOutput) Sim2Pin() pulumi.StringPtrOutput

func (ExtenderprofileCellularModem1PtrOutput) Sim2PinCode 

func (o ExtenderprofileCellularModem1PtrOutput) Sim2PinCode() pulumi.StringPtrOutput

func (ExtenderprofileCellularModem1PtrOutput) ToExtenderprofileCellularModem1PtrOutput 

func (o ExtenderprofileCellularModem1PtrOutput) ToExtenderprofileCellularModem1PtrOutput() ExtenderprofileCellularModem1PtrOutput

func (ExtenderprofileCellularModem1PtrOutput) ToExtenderprofileCellularModem1PtrOutputWithContext 

func (o ExtenderprofileCellularModem1PtrOutput) ToExtenderprofileCellularModem1PtrOutputWithContext(ctx context.Context) ExtenderprofileCellularModem1PtrOutput

type ExtenderprofileCellularModem2 

type ExtenderprofileCellularModem2 struct {
	AutoSwitch       *ExtenderprofileCellularModem2AutoSwitch `pulumi:"autoSwitch"`
	ConnStatus       *int                                     `pulumi:"connStatus"`
	DefaultSim       *string                                  `pulumi:"defaultSim"`
	Gps              *string                                  `pulumi:"gps"`
	PreferredCarrier *string                                  `pulumi:"preferredCarrier"`
	RedundantIntf    *string                                  `pulumi:"redundantIntf"`
	RedundantMode    *string                                  `pulumi:"redundantMode"`
	Sim1Pin          *string                                  `pulumi:"sim1Pin"`
	Sim1PinCode      *string                                  `pulumi:"sim1PinCode"`
	Sim2Pin          *string                                  `pulumi:"sim2Pin"`
	Sim2PinCode      *string                                  `pulumi:"sim2PinCode"`
}

type ExtenderprofileCellularModem2Args 

type ExtenderprofileCellularModem2Args struct {
	AutoSwitch       ExtenderprofileCellularModem2AutoSwitchPtrInput `pulumi:"autoSwitch"`
	ConnStatus       pulumi.IntPtrInput                              `pulumi:"connStatus"`
	DefaultSim       pulumi.StringPtrInput                           `pulumi:"defaultSim"`
	Gps              pulumi.StringPtrInput                           `pulumi:"gps"`
	PreferredCarrier pulumi.StringPtrInput                           `pulumi:"preferredCarrier"`
	RedundantIntf    pulumi.StringPtrInput                           `pulumi:"redundantIntf"`
	RedundantMode    pulumi.StringPtrInput                           `pulumi:"redundantMode"`
	Sim1Pin          pulumi.StringPtrInput                           `pulumi:"sim1Pin"`
	Sim1PinCode      pulumi.StringPtrInput                           `pulumi:"sim1PinCode"`
	Sim2Pin          pulumi.StringPtrInput                           `pulumi:"sim2Pin"`
	Sim2PinCode      pulumi.StringPtrInput                           `pulumi:"sim2PinCode"`
}

func (ExtenderprofileCellularModem2Args) ElementType 

func (ExtenderprofileCellularModem2Args) ElementType() reflect.Type

func (ExtenderprofileCellularModem2Args) ToExtenderprofileCellularModem2Output 

func (i ExtenderprofileCellularModem2Args) ToExtenderprofileCellularModem2Output() ExtenderprofileCellularModem2Output

func (ExtenderprofileCellularModem2Args) ToExtenderprofileCellularModem2OutputWithContext 

func (i ExtenderprofileCellularModem2Args) ToExtenderprofileCellularModem2OutputWithContext(ctx context.Context) ExtenderprofileCellularModem2Output

func (ExtenderprofileCellularModem2Args) ToExtenderprofileCellularModem2PtrOutput 

func (i ExtenderprofileCellularModem2Args) ToExtenderprofileCellularModem2PtrOutput() ExtenderprofileCellularModem2PtrOutput

func (ExtenderprofileCellularModem2Args) ToExtenderprofileCellularModem2PtrOutputWithContext 

func (i ExtenderprofileCellularModem2Args) ToExtenderprofileCellularModem2PtrOutputWithContext(ctx context.Context) ExtenderprofileCellularModem2PtrOutput

type ExtenderprofileCellularModem2AutoSwitch 

type ExtenderprofileCellularModem2AutoSwitch struct {
	// Automatically switch based on data usage. Valid values: `disable`, `enable`.
	Dataplan *string `pulumi:"dataplan"`
	// Auto switch by disconnect. Valid values: `disable`, `enable`.
	Disconnect *string `pulumi:"disconnect"`
	// Automatically switch based on disconnect period.
	DisconnectPeriod *int `pulumi:"disconnectPeriod"`
	// Automatically switch based on disconnect threshold.
	DisconnectThreshold *int `pulumi:"disconnectThreshold"`
	// Automatically switch based on signal strength. Valid values: `disable`, `enable`.
	Signal *string `pulumi:"signal"`
	// Auto switch with switch back multi-options. Valid values: `time`, `timer`.
	SwitchBack *string `pulumi:"switchBack"`
	// Automatically switch over to preferred SIM/carrier at a specified time in UTC (HH:MM).
	SwitchBackTime *string `pulumi:"switchBackTime"`
	// Automatically switch over to preferred SIM/carrier after the given time (3600 - 2147483647 sec).
	SwitchBackTimer *int `pulumi:"switchBackTimer"`
}

type ExtenderprofileCellularModem2AutoSwitchArgs 

type ExtenderprofileCellularModem2AutoSwitchArgs struct {
	// Automatically switch based on data usage. Valid values: `disable`, `enable`.
	Dataplan pulumi.StringPtrInput `pulumi:"dataplan"`
	// Auto switch by disconnect. Valid values: `disable`, `enable`.
	Disconnect pulumi.StringPtrInput `pulumi:"disconnect"`
	// Automatically switch based on disconnect period.
	DisconnectPeriod pulumi.IntPtrInput `pulumi:"disconnectPeriod"`
	// Automatically switch based on disconnect threshold.
	DisconnectThreshold pulumi.IntPtrInput `pulumi:"disconnectThreshold"`
	// Automatically switch based on signal strength. Valid values: `disable`, `enable`.
	Signal pulumi.StringPtrInput `pulumi:"signal"`
	// Auto switch with switch back multi-options. Valid values: `time`, `timer`.
	SwitchBack pulumi.StringPtrInput `pulumi:"switchBack"`
	// Automatically switch over to preferred SIM/carrier at a specified time in UTC (HH:MM).
	SwitchBackTime pulumi.StringPtrInput `pulumi:"switchBackTime"`
	// Automatically switch over to preferred SIM/carrier after the given time (3600 - 2147483647 sec).
	SwitchBackTimer pulumi.IntPtrInput `pulumi:"switchBackTimer"`
}

func (ExtenderprofileCellularModem2AutoSwitchArgs) ElementType 

func (ExtenderprofileCellularModem2AutoSwitchArgs) ElementType() reflect.Type

func (ExtenderprofileCellularModem2AutoSwitchArgs) ToExtenderprofileCellularModem2AutoSwitchOutput 

func (i ExtenderprofileCellularModem2AutoSwitchArgs) ToExtenderprofileCellularModem2AutoSwitchOutput() ExtenderprofileCellularModem2AutoSwitchOutput

func (ExtenderprofileCellularModem2AutoSwitchArgs) ToExtenderprofileCellularModem2AutoSwitchOutputWithContext 

func (i ExtenderprofileCellularModem2AutoSwitchArgs) ToExtenderprofileCellularModem2AutoSwitchOutputWithContext(ctx context.Context) ExtenderprofileCellularModem2AutoSwitchOutput

func (ExtenderprofileCellularModem2AutoSwitchArgs) ToExtenderprofileCellularModem2AutoSwitchPtrOutput 

func (i ExtenderprofileCellularModem2AutoSwitchArgs) ToExtenderprofileCellularModem2AutoSwitchPtrOutput() ExtenderprofileCellularModem2AutoSwitchPtrOutput

func (ExtenderprofileCellularModem2AutoSwitchArgs) ToExtenderprofileCellularModem2AutoSwitchPtrOutputWithContext 

func (i ExtenderprofileCellularModem2AutoSwitchArgs) ToExtenderprofileCellularModem2AutoSwitchPtrOutputWithContext(ctx context.Context) ExtenderprofileCellularModem2AutoSwitchPtrOutput

type ExtenderprofileCellularModem2AutoSwitchInput 

type ExtenderprofileCellularModem2AutoSwitchInput interface {
	pulumi.Input

	ToExtenderprofileCellularModem2AutoSwitchOutput() ExtenderprofileCellularModem2AutoSwitchOutput
	ToExtenderprofileCellularModem2AutoSwitchOutputWithContext(context.Context) ExtenderprofileCellularModem2AutoSwitchOutput
}

ExtenderprofileCellularModem2AutoSwitchInput is an input type that accepts ExtenderprofileCellularModem2AutoSwitchArgs and ExtenderprofileCellularModem2AutoSwitchOutput values. You can construct a concrete instance of `ExtenderprofileCellularModem2AutoSwitchInput` via: 

ExtenderprofileCellularModem2AutoSwitchArgs{...}

type ExtenderprofileCellularModem2AutoSwitchOutput 

type ExtenderprofileCellularModem2AutoSwitchOutput struct{ *pulumi.OutputState }

func (ExtenderprofileCellularModem2AutoSwitchOutput) Dataplan 

func (o ExtenderprofileCellularModem2AutoSwitchOutput) Dataplan() pulumi.StringPtrOutput

Automatically switch based on data usage. Valid values: `disable`, `enable`.

func (ExtenderprofileCellularModem2AutoSwitchOutput) Disconnect 

func (o ExtenderprofileCellularModem2AutoSwitchOutput) Disconnect() pulumi.StringPtrOutput

Auto switch by disconnect. Valid values: `disable`, `enable`.

func (ExtenderprofileCellularModem2AutoSwitchOutput) DisconnectPeriod 

func (o ExtenderprofileCellularModem2AutoSwitchOutput) DisconnectPeriod() pulumi.IntPtrOutput

Automatically switch based on disconnect period.

func (ExtenderprofileCellularModem2AutoSwitchOutput) DisconnectThreshold 

func (o ExtenderprofileCellularModem2AutoSwitchOutput) DisconnectThreshold() pulumi.IntPtrOutput

Automatically switch based on disconnect threshold.

func (ExtenderprofileCellularModem2AutoSwitchOutput) ElementType 

func (ExtenderprofileCellularModem2AutoSwitchOutput) ElementType() reflect.Type

func (ExtenderprofileCellularModem2AutoSwitchOutput) Signal 

func (o ExtenderprofileCellularModem2AutoSwitchOutput) Signal() pulumi.StringPtrOutput

Automatically switch based on signal strength. Valid values: `disable`, `enable`.

func (ExtenderprofileCellularModem2AutoSwitchOutput) SwitchBack 

func (o ExtenderprofileCellularModem2AutoSwitchOutput) SwitchBack() pulumi.StringPtrOutput

Auto switch with switch back multi-options. Valid values: `time`, `timer`.

func (ExtenderprofileCellularModem2AutoSwitchOutput) SwitchBackTime 

func (o ExtenderprofileCellularModem2AutoSwitchOutput) SwitchBackTime() pulumi.StringPtrOutput

Automatically switch over to preferred SIM/carrier at a specified time in UTC (HH:MM).

func (ExtenderprofileCellularModem2AutoSwitchOutput) SwitchBackTimer 

func (o ExtenderprofileCellularModem2AutoSwitchOutput) SwitchBackTimer() pulumi.IntPtrOutput

Automatically switch over to preferred SIM/carrier after the given time (3600 - 2147483647 sec).

func (ExtenderprofileCellularModem2AutoSwitchOutput) ToExtenderprofileCellularModem2AutoSwitchOutput 

func (o ExtenderprofileCellularModem2AutoSwitchOutput) ToExtenderprofileCellularModem2AutoSwitchOutput() ExtenderprofileCellularModem2AutoSwitchOutput

func (ExtenderprofileCellularModem2AutoSwitchOutput) ToExtenderprofileCellularModem2AutoSwitchOutputWithContext 

func (o ExtenderprofileCellularModem2AutoSwitchOutput) ToExtenderprofileCellularModem2AutoSwitchOutputWithContext(ctx context.Context) ExtenderprofileCellularModem2AutoSwitchOutput

func (ExtenderprofileCellularModem2AutoSwitchOutput) ToExtenderprofileCellularModem2AutoSwitchPtrOutput 

func (o ExtenderprofileCellularModem2AutoSwitchOutput) ToExtenderprofileCellularModem2AutoSwitchPtrOutput() ExtenderprofileCellularModem2AutoSwitchPtrOutput

func (ExtenderprofileCellularModem2AutoSwitchOutput) ToExtenderprofileCellularModem2AutoSwitchPtrOutputWithContext 

func (o ExtenderprofileCellularModem2AutoSwitchOutput) ToExtenderprofileCellularModem2AutoSwitchPtrOutputWithContext(ctx context.Context) ExtenderprofileCellularModem2AutoSwitchPtrOutput

type ExtenderprofileCellularModem2AutoSwitchPtrInput 

type ExtenderprofileCellularModem2AutoSwitchPtrInput interface {
	pulumi.Input

	ToExtenderprofileCellularModem2AutoSwitchPtrOutput() ExtenderprofileCellularModem2AutoSwitchPtrOutput
	ToExtenderprofileCellularModem2AutoSwitchPtrOutputWithContext(context.Context) ExtenderprofileCellularModem2AutoSwitchPtrOutput
}

ExtenderprofileCellularModem2AutoSwitchPtrInput is an input type that accepts ExtenderprofileCellularModem2AutoSwitchArgs, ExtenderprofileCellularModem2AutoSwitchPtr and ExtenderprofileCellularModem2AutoSwitchPtrOutput values. You can construct a concrete instance of `ExtenderprofileCellularModem2AutoSwitchPtrInput` via: 

        ExtenderprofileCellularModem2AutoSwitchArgs{...}

or:

        nil

func ExtenderprofileCellularModem2AutoSwitchPtr 

func ExtenderprofileCellularModem2AutoSwitchPtr(v *ExtenderprofileCellularModem2AutoSwitchArgs) ExtenderprofileCellularModem2AutoSwitchPtrInput

type ExtenderprofileCellularModem2AutoSwitchPtrOutput 

type ExtenderprofileCellularModem2AutoSwitchPtrOutput struct{ *pulumi.OutputState }

func (ExtenderprofileCellularModem2AutoSwitchPtrOutput) Dataplan 

func (o ExtenderprofileCellularModem2AutoSwitchPtrOutput) Dataplan() pulumi.StringPtrOutput

Automatically switch based on data usage. Valid values: `disable`, `enable`.

func (ExtenderprofileCellularModem2AutoSwitchPtrOutput) Disconnect 

func (o ExtenderprofileCellularModem2AutoSwitchPtrOutput) Disconnect() pulumi.StringPtrOutput

Auto switch by disconnect. Valid values: `disable`, `enable`.

func (ExtenderprofileCellularModem2AutoSwitchPtrOutput) DisconnectPeriod 

func (o ExtenderprofileCellularModem2AutoSwitchPtrOutput) DisconnectPeriod() pulumi.IntPtrOutput

Automatically switch based on disconnect period.

func (ExtenderprofileCellularModem2AutoSwitchPtrOutput) DisconnectThreshold 

func (o ExtenderprofileCellularModem2AutoSwitchPtrOutput) DisconnectThreshold() pulumi.IntPtrOutput

Automatically switch based on disconnect threshold.

func (ExtenderprofileCellularModem2AutoSwitchPtrOutput) Elem 

func (o ExtenderprofileCellularModem2AutoSwitchPtrOutput) Elem() ExtenderprofileCellularModem2AutoSwitchOutput

func (ExtenderprofileCellularModem2AutoSwitchPtrOutput) ElementType 

func (ExtenderprofileCellularModem2AutoSwitchPtrOutput) ElementType() reflect.Type

func (ExtenderprofileCellularModem2AutoSwitchPtrOutput) Signal 

func (o ExtenderprofileCellularModem2AutoSwitchPtrOutput) Signal() pulumi.StringPtrOutput

Automatically switch based on signal strength. Valid values: `disable`, `enable`.

func (ExtenderprofileCellularModem2AutoSwitchPtrOutput) SwitchBack 

func (o ExtenderprofileCellularModem2AutoSwitchPtrOutput) SwitchBack() pulumi.StringPtrOutput

Auto switch with switch back multi-options. Valid values: `time`, `timer`.

func (ExtenderprofileCellularModem2AutoSwitchPtrOutput) SwitchBackTime 

func (o ExtenderprofileCellularModem2AutoSwitchPtrOutput) SwitchBackTime() pulumi.StringPtrOutput

Automatically switch over to preferred SIM/carrier at a specified time in UTC (HH:MM).

func (ExtenderprofileCellularModem2AutoSwitchPtrOutput) SwitchBackTimer 

func (o ExtenderprofileCellularModem2AutoSwitchPtrOutput) SwitchBackTimer() pulumi.IntPtrOutput

Automatically switch over to preferred SIM/carrier after the given time (3600 - 2147483647 sec).

func (ExtenderprofileCellularModem2AutoSwitchPtrOutput) ToExtenderprofileCellularModem2AutoSwitchPtrOutput 

func (o ExtenderprofileCellularModem2AutoSwitchPtrOutput) ToExtenderprofileCellularModem2AutoSwitchPtrOutput() ExtenderprofileCellularModem2AutoSwitchPtrOutput

func (ExtenderprofileCellularModem2AutoSwitchPtrOutput) ToExtenderprofileCellularModem2AutoSwitchPtrOutputWithContext 

func (o ExtenderprofileCellularModem2AutoSwitchPtrOutput) ToExtenderprofileCellularModem2AutoSwitchPtrOutputWithContext(ctx context.Context) ExtenderprofileCellularModem2AutoSwitchPtrOutput

type ExtenderprofileCellularModem2Input 

type ExtenderprofileCellularModem2Input interface {
	pulumi.Input

	ToExtenderprofileCellularModem2Output() ExtenderprofileCellularModem2Output
	ToExtenderprofileCellularModem2OutputWithContext(context.Context) ExtenderprofileCellularModem2Output
}

ExtenderprofileCellularModem2Input is an input type that accepts ExtenderprofileCellularModem2Args and ExtenderprofileCellularModem2Output values. You can construct a concrete instance of `ExtenderprofileCellularModem2Input` via: 

ExtenderprofileCellularModem2Args{...}

type ExtenderprofileCellularModem2Output 

type ExtenderprofileCellularModem2Output struct{ *pulumi.OutputState }

func (ExtenderprofileCellularModem2Output) AutoSwitch 

func (o ExtenderprofileCellularModem2Output) AutoSwitch() ExtenderprofileCellularModem2AutoSwitchPtrOutput

func (ExtenderprofileCellularModem2Output) ConnStatus 

func (o ExtenderprofileCellularModem2Output) ConnStatus() pulumi.IntPtrOutput

func (ExtenderprofileCellularModem2Output) DefaultSim 

func (o ExtenderprofileCellularModem2Output) DefaultSim() pulumi.StringPtrOutput

func (ExtenderprofileCellularModem2Output) ElementType 

func (ExtenderprofileCellularModem2Output) ElementType() reflect.Type

func (ExtenderprofileCellularModem2Output) Gps 

func (o ExtenderprofileCellularModem2Output) Gps() pulumi.StringPtrOutput

func (ExtenderprofileCellularModem2Output) PreferredCarrier 

func (o ExtenderprofileCellularModem2Output) PreferredCarrier() pulumi.StringPtrOutput

func (ExtenderprofileCellularModem2Output) RedundantIntf 

func (o ExtenderprofileCellularModem2Output) RedundantIntf() pulumi.StringPtrOutput

func (ExtenderprofileCellularModem2Output) RedundantMode 

func (o ExtenderprofileCellularModem2Output) RedundantMode() pulumi.StringPtrOutput

func (ExtenderprofileCellularModem2Output) Sim1Pin 

func (o ExtenderprofileCellularModem2Output) Sim1Pin() pulumi.StringPtrOutput

func (ExtenderprofileCellularModem2Output) Sim1PinCode 

func (o ExtenderprofileCellularModem2Output) Sim1PinCode() pulumi.StringPtrOutput

func (ExtenderprofileCellularModem2Output) Sim2Pin 

func (o ExtenderprofileCellularModem2Output) Sim2Pin() pulumi.StringPtrOutput

func (ExtenderprofileCellularModem2Output) Sim2PinCode 

func (o ExtenderprofileCellularModem2Output) Sim2PinCode() pulumi.StringPtrOutput

func (ExtenderprofileCellularModem2Output) ToExtenderprofileCellularModem2Output 

func (o ExtenderprofileCellularModem2Output) ToExtenderprofileCellularModem2Output() ExtenderprofileCellularModem2Output

func (ExtenderprofileCellularModem2Output) ToExtenderprofileCellularModem2OutputWithContext 

func (o ExtenderprofileCellularModem2Output) ToExtenderprofileCellularModem2OutputWithContext(ctx context.Context) ExtenderprofileCellularModem2Output

func (ExtenderprofileCellularModem2Output) ToExtenderprofileCellularModem2PtrOutput 

func (o ExtenderprofileCellularModem2Output) ToExtenderprofileCellularModem2PtrOutput() ExtenderprofileCellularModem2PtrOutput

func (ExtenderprofileCellularModem2Output) ToExtenderprofileCellularModem2PtrOutputWithContext 

func (o ExtenderprofileCellularModem2Output) ToExtenderprofileCellularModem2PtrOutputWithContext(ctx context.Context) ExtenderprofileCellularModem2PtrOutput

type ExtenderprofileCellularModem2PtrInput 

type ExtenderprofileCellularModem2PtrInput interface {
	pulumi.Input

	ToExtenderprofileCellularModem2PtrOutput() ExtenderprofileCellularModem2PtrOutput
	ToExtenderprofileCellularModem2PtrOutputWithContext(context.Context) ExtenderprofileCellularModem2PtrOutput
}

ExtenderprofileCellularModem2PtrInput is an input type that accepts ExtenderprofileCellularModem2Args, ExtenderprofileCellularModem2Ptr and ExtenderprofileCellularModem2PtrOutput values. You can construct a concrete instance of `ExtenderprofileCellularModem2PtrInput` via: 

        ExtenderprofileCellularModem2Args{...}

or:

        nil

func ExtenderprofileCellularModem2Ptr 

func ExtenderprofileCellularModem2Ptr(v *ExtenderprofileCellularModem2Args) ExtenderprofileCellularModem2PtrInput

type ExtenderprofileCellularModem2PtrOutput 

type ExtenderprofileCellularModem2PtrOutput struct{ *pulumi.OutputState }

func (ExtenderprofileCellularModem2PtrOutput) AutoSwitch 

func (o ExtenderprofileCellularModem2PtrOutput) AutoSwitch() ExtenderprofileCellularModem2AutoSwitchPtrOutput

func (ExtenderprofileCellularModem2PtrOutput) ConnStatus 

func (o ExtenderprofileCellularModem2PtrOutput) ConnStatus() pulumi.IntPtrOutput

func (ExtenderprofileCellularModem2PtrOutput) DefaultSim 

func (o ExtenderprofileCellularModem2PtrOutput) DefaultSim() pulumi.StringPtrOutput

func (ExtenderprofileCellularModem2PtrOutput) Elem 

func (o ExtenderprofileCellularModem2PtrOutput) Elem() ExtenderprofileCellularModem2Output

func (ExtenderprofileCellularModem2PtrOutput) ElementType 

func (ExtenderprofileCellularModem2PtrOutput) ElementType() reflect.Type

func (ExtenderprofileCellularModem2PtrOutput) Gps 

func (o ExtenderprofileCellularModem2PtrOutput) Gps() pulumi.StringPtrOutput

func (ExtenderprofileCellularModem2PtrOutput) PreferredCarrier 

func (o ExtenderprofileCellularModem2PtrOutput) PreferredCarrier() pulumi.StringPtrOutput

func (ExtenderprofileCellularModem2PtrOutput) RedundantIntf 

func (o ExtenderprofileCellularModem2PtrOutput) RedundantIntf() pulumi.StringPtrOutput

func (ExtenderprofileCellularModem2PtrOutput) RedundantMode 

func (o ExtenderprofileCellularModem2PtrOutput) RedundantMode() pulumi.StringPtrOutput

func (ExtenderprofileCellularModem2PtrOutput) Sim1Pin 

func (o ExtenderprofileCellularModem2PtrOutput) Sim1Pin() pulumi.StringPtrOutput

func (ExtenderprofileCellularModem2PtrOutput) Sim1PinCode 

func (o ExtenderprofileCellularModem2PtrOutput) Sim1PinCode() pulumi.StringPtrOutput

func (ExtenderprofileCellularModem2PtrOutput) Sim2Pin 

func (o ExtenderprofileCellularModem2PtrOutput) Sim2Pin() pulumi.StringPtrOutput

func (ExtenderprofileCellularModem2PtrOutput) Sim2PinCode 

func (o ExtenderprofileCellularModem2PtrOutput) Sim2PinCode() pulumi.StringPtrOutput

func (ExtenderprofileCellularModem2PtrOutput) ToExtenderprofileCellularModem2PtrOutput 

func (o ExtenderprofileCellularModem2PtrOutput) ToExtenderprofileCellularModem2PtrOutput() ExtenderprofileCellularModem2PtrOutput

func (ExtenderprofileCellularModem2PtrOutput) ToExtenderprofileCellularModem2PtrOutputWithContext 

func (o ExtenderprofileCellularModem2PtrOutput) ToExtenderprofileCellularModem2PtrOutputWithContext(ctx context.Context) ExtenderprofileCellularModem2PtrOutput

type ExtenderprofileCellularOutput 

type ExtenderprofileCellularOutput struct{ *pulumi.OutputState }

func (ExtenderprofileCellularOutput) ControllerReport 

func (o ExtenderprofileCellularOutput) ControllerReport() ExtenderprofileCellularControllerReportPtrOutput

FortiExtender controller report configuration. The structure of `controllerReport` block is documented below.

func (ExtenderprofileCellularOutput) Dataplans 

func (o ExtenderprofileCellularOutput) Dataplans() ExtenderprofileCellularDataplanArrayOutput

Dataplan names. The structure of `dataplan` block is documented below.

func (ExtenderprofileCellularOutput) ElementType 

func (ExtenderprofileCellularOutput) ElementType() reflect.Type

func (ExtenderprofileCellularOutput) Modem1 

func (o ExtenderprofileCellularOutput) Modem1() ExtenderprofileCellularModem1PtrOutput

Configuration options for modem 1. The structure of `modem1` block is documented below.

func (ExtenderprofileCellularOutput) Modem2 

func (o ExtenderprofileCellularOutput) Modem2() ExtenderprofileCellularModem2PtrOutput

Configuration options for modem 2. The structure of `modem2` block is documented below.

func (ExtenderprofileCellularOutput) SmsNotification 

func (o ExtenderprofileCellularOutput) SmsNotification() ExtenderprofileCellularSmsNotificationPtrOutput

FortiExtender cellular SMS notification configuration. The structure of `smsNotification` block is documented below.

func (ExtenderprofileCellularOutput) ToExtenderprofileCellularOutput 

func (o ExtenderprofileCellularOutput) ToExtenderprofileCellularOutput() ExtenderprofileCellularOutput

func (ExtenderprofileCellularOutput) ToExtenderprofileCellularOutputWithContext 

func (o ExtenderprofileCellularOutput) ToExtenderprofileCellularOutputWithContext(ctx context.Context) ExtenderprofileCellularOutput

func (ExtenderprofileCellularOutput) ToExtenderprofileCellularPtrOutput 

func (o ExtenderprofileCellularOutput) ToExtenderprofileCellularPtrOutput() ExtenderprofileCellularPtrOutput

func (ExtenderprofileCellularOutput) ToExtenderprofileCellularPtrOutputWithContext 

func (o ExtenderprofileCellularOutput) ToExtenderprofileCellularPtrOutputWithContext(ctx context.Context) ExtenderprofileCellularPtrOutput

type ExtenderprofileCellularPtrInput 

type ExtenderprofileCellularPtrInput interface {
	pulumi.Input

	ToExtenderprofileCellularPtrOutput() ExtenderprofileCellularPtrOutput
	ToExtenderprofileCellularPtrOutputWithContext(context.Context) ExtenderprofileCellularPtrOutput
}

ExtenderprofileCellularPtrInput is an input type that accepts ExtenderprofileCellularArgs, ExtenderprofileCellularPtr and ExtenderprofileCellularPtrOutput values. You can construct a concrete instance of `ExtenderprofileCellularPtrInput` via: 

        ExtenderprofileCellularArgs{...}

or:

        nil

func ExtenderprofileCellularPtr 

func ExtenderprofileCellularPtr(v *ExtenderprofileCellularArgs) ExtenderprofileCellularPtrInput

type ExtenderprofileCellularPtrOutput 

type ExtenderprofileCellularPtrOutput struct{ *pulumi.OutputState }

func (ExtenderprofileCellularPtrOutput) ControllerReport 

func (o ExtenderprofileCellularPtrOutput) ControllerReport() ExtenderprofileCellularControllerReportPtrOutput

FortiExtender controller report configuration. The structure of `controllerReport` block is documented below.

func (ExtenderprofileCellularPtrOutput) Dataplans 

func (o ExtenderprofileCellularPtrOutput) Dataplans() ExtenderprofileCellularDataplanArrayOutput

Dataplan names. The structure of `dataplan` block is documented below.

func (ExtenderprofileCellularPtrOutput) Elem 

func (o ExtenderprofileCellularPtrOutput) Elem() ExtenderprofileCellularOutput

func (ExtenderprofileCellularPtrOutput) ElementType 

func (ExtenderprofileCellularPtrOutput) ElementType() reflect.Type

func (ExtenderprofileCellularPtrOutput) Modem1 

func (o ExtenderprofileCellularPtrOutput) Modem1() ExtenderprofileCellularModem1PtrOutput

Configuration options for modem 1. The structure of `modem1` block is documented below.

func (ExtenderprofileCellularPtrOutput) Modem2 

func (o ExtenderprofileCellularPtrOutput) Modem2() ExtenderprofileCellularModem2PtrOutput

Configuration options for modem 2. The structure of `modem2` block is documented below.

func (ExtenderprofileCellularPtrOutput) SmsNotification 

func (o ExtenderprofileCellularPtrOutput) SmsNotification() ExtenderprofileCellularSmsNotificationPtrOutput

FortiExtender cellular SMS notification configuration. The structure of `smsNotification` block is documented below.

func (ExtenderprofileCellularPtrOutput) ToExtenderprofileCellularPtrOutput 

func (o ExtenderprofileCellularPtrOutput) ToExtenderprofileCellularPtrOutput() ExtenderprofileCellularPtrOutput

func (ExtenderprofileCellularPtrOutput) ToExtenderprofileCellularPtrOutputWithContext 

func (o ExtenderprofileCellularPtrOutput) ToExtenderprofileCellularPtrOutputWithContext(ctx context.Context) ExtenderprofileCellularPtrOutput

type ExtenderprofileCellularSmsNotification 

type ExtenderprofileCellularSmsNotification struct {
	// SMS alert list. The structure of `alert` block is documented below.
	Alert *ExtenderprofileCellularSmsNotificationAlert `pulumi:"alert"`
	// SMS notification receiver list. The structure of `receiver` block is documented below.
	Receivers []ExtenderprofileCellularSmsNotificationReceiver `pulumi:"receivers"`
	// FortiExtender SMS notification status. Valid values: `disable`, `enable`.
	Status *string `pulumi:"status"`
}

type ExtenderprofileCellularSmsNotificationAlert 

type ExtenderprofileCellularSmsNotificationAlert struct {
	// Display string when data exhausted.
	DataExhausted *string `pulumi:"dataExhausted"`
	// Display string when FortiGate backup mode switched.
	FgtBackupModeSwitch *string `pulumi:"fgtBackupModeSwitch"`
	// Display string when signal strength is low.
	LowSignalStrength *string `pulumi:"lowSignalStrength"`
	// Display string when mode is switched.
	ModeSwitch *string `pulumi:"modeSwitch"`
	// Display string when falling back to a previous OS image.
	OsImageFallback *string `pulumi:"osImageFallback"`
	// Display string when session disconnected.
	SessionDisconnect *string `pulumi:"sessionDisconnect"`
	// Display string when system rebooted.
	SystemReboot *string `pulumi:"systemReboot"`
}

type ExtenderprofileCellularSmsNotificationAlertArgs 

type ExtenderprofileCellularSmsNotificationAlertArgs struct {
	// Display string when data exhausted.
	DataExhausted pulumi.StringPtrInput `pulumi:"dataExhausted"`
	// Display string when FortiGate backup mode switched.
	FgtBackupModeSwitch pulumi.StringPtrInput `pulumi:"fgtBackupModeSwitch"`
	// Display string when signal strength is low.
	LowSignalStrength pulumi.StringPtrInput `pulumi:"lowSignalStrength"`
	// Display string when mode is switched.
	ModeSwitch pulumi.StringPtrInput `pulumi:"modeSwitch"`
	// Display string when falling back to a previous OS image.
	OsImageFallback pulumi.StringPtrInput `pulumi:"osImageFallback"`
	// Display string when session disconnected.
	SessionDisconnect pulumi.StringPtrInput `pulumi:"sessionDisconnect"`
	// Display string when system rebooted.
	SystemReboot pulumi.StringPtrInput `pulumi:"systemReboot"`
}

func (ExtenderprofileCellularSmsNotificationAlertArgs) ElementType 

func (ExtenderprofileCellularSmsNotificationAlertArgs) ElementType() reflect.Type

func (ExtenderprofileCellularSmsNotificationAlertArgs) ToExtenderprofileCellularSmsNotificationAlertOutput 

func (i ExtenderprofileCellularSmsNotificationAlertArgs) ToExtenderprofileCellularSmsNotificationAlertOutput() ExtenderprofileCellularSmsNotificationAlertOutput

func (ExtenderprofileCellularSmsNotificationAlertArgs) ToExtenderprofileCellularSmsNotificationAlertOutputWithContext 

func (i ExtenderprofileCellularSmsNotificationAlertArgs) ToExtenderprofileCellularSmsNotificationAlertOutputWithContext(ctx context.Context) ExtenderprofileCellularSmsNotificationAlertOutput

func (ExtenderprofileCellularSmsNotificationAlertArgs) ToExtenderprofileCellularSmsNotificationAlertPtrOutput 

func (i ExtenderprofileCellularSmsNotificationAlertArgs) ToExtenderprofileCellularSmsNotificationAlertPtrOutput() ExtenderprofileCellularSmsNotificationAlertPtrOutput

func (ExtenderprofileCellularSmsNotificationAlertArgs) ToExtenderprofileCellularSmsNotificationAlertPtrOutputWithContext 

func (i ExtenderprofileCellularSmsNotificationAlertArgs) ToExtenderprofileCellularSmsNotificationAlertPtrOutputWithContext(ctx context.Context) ExtenderprofileCellularSmsNotificationAlertPtrOutput

type ExtenderprofileCellularSmsNotificationAlertInput 

type ExtenderprofileCellularSmsNotificationAlertInput interface {
	pulumi.Input

	ToExtenderprofileCellularSmsNotificationAlertOutput() ExtenderprofileCellularSmsNotificationAlertOutput
	ToExtenderprofileCellularSmsNotificationAlertOutputWithContext(context.Context) ExtenderprofileCellularSmsNotificationAlertOutput
}

ExtenderprofileCellularSmsNotificationAlertInput is an input type that accepts ExtenderprofileCellularSmsNotificationAlertArgs and ExtenderprofileCellularSmsNotificationAlertOutput values. You can construct a concrete instance of `ExtenderprofileCellularSmsNotificationAlertInput` via: 

ExtenderprofileCellularSmsNotificationAlertArgs{...}

type ExtenderprofileCellularSmsNotificationAlertOutput 

type ExtenderprofileCellularSmsNotificationAlertOutput struct{ *pulumi.OutputState }

func (ExtenderprofileCellularSmsNotificationAlertOutput) DataExhausted 

func (o ExtenderprofileCellularSmsNotificationAlertOutput) DataExhausted() pulumi.StringPtrOutput

Display string when data exhausted.

func (ExtenderprofileCellularSmsNotificationAlertOutput) ElementType 

func (ExtenderprofileCellularSmsNotificationAlertOutput) ElementType() reflect.Type

func (ExtenderprofileCellularSmsNotificationAlertOutput) FgtBackupModeSwitch 

func (o ExtenderprofileCellularSmsNotificationAlertOutput) FgtBackupModeSwitch() pulumi.StringPtrOutput

Display string when FortiGate backup mode switched.

func (ExtenderprofileCellularSmsNotificationAlertOutput) LowSignalStrength 

func (o ExtenderprofileCellularSmsNotificationAlertOutput) LowSignalStrength() pulumi.StringPtrOutput

Display string when signal strength is low.

func (ExtenderprofileCellularSmsNotificationAlertOutput) ModeSwitch 

func (o ExtenderprofileCellularSmsNotificationAlertOutput) ModeSwitch() pulumi.StringPtrOutput

Display string when mode is switched.

func (ExtenderprofileCellularSmsNotificationAlertOutput) OsImageFallback 

func (o ExtenderprofileCellularSmsNotificationAlertOutput) OsImageFallback() pulumi.StringPtrOutput

Display string when falling back to a previous OS image.

func (ExtenderprofileCellularSmsNotificationAlertOutput) SessionDisconnect 

func (o ExtenderprofileCellularSmsNotificationAlertOutput) SessionDisconnect() pulumi.StringPtrOutput

Display string when session disconnected.

func (ExtenderprofileCellularSmsNotificationAlertOutput) SystemReboot 

func (o ExtenderprofileCellularSmsNotificationAlertOutput) SystemReboot() pulumi.StringPtrOutput

Display string when system rebooted.

func (ExtenderprofileCellularSmsNotificationAlertOutput) ToExtenderprofileCellularSmsNotificationAlertOutput 

func (o ExtenderprofileCellularSmsNotificationAlertOutput) ToExtenderprofileCellularSmsNotificationAlertOutput() ExtenderprofileCellularSmsNotificationAlertOutput

func (ExtenderprofileCellularSmsNotificationAlertOutput) ToExtenderprofileCellularSmsNotificationAlertOutputWithContext 

func (o ExtenderprofileCellularSmsNotificationAlertOutput) ToExtenderprofileCellularSmsNotificationAlertOutputWithContext(ctx context.Context) ExtenderprofileCellularSmsNotificationAlertOutput

func (ExtenderprofileCellularSmsNotificationAlertOutput) ToExtenderprofileCellularSmsNotificationAlertPtrOutput 

func (o ExtenderprofileCellularSmsNotificationAlertOutput) ToExtenderprofileCellularSmsNotificationAlertPtrOutput() ExtenderprofileCellularSmsNotificationAlertPtrOutput

func (ExtenderprofileCellularSmsNotificationAlertOutput) ToExtenderprofileCellularSmsNotificationAlertPtrOutputWithContext 

func (o ExtenderprofileCellularSmsNotificationAlertOutput) ToExtenderprofileCellularSmsNotificationAlertPtrOutputWithContext(ctx context.Context) ExtenderprofileCellularSmsNotificationAlertPtrOutput

type ExtenderprofileCellularSmsNotificationAlertPtrInput 

type ExtenderprofileCellularSmsNotificationAlertPtrInput interface {
	pulumi.Input

	ToExtenderprofileCellularSmsNotificationAlertPtrOutput() ExtenderprofileCellularSmsNotificationAlertPtrOutput
	ToExtenderprofileCellularSmsNotificationAlertPtrOutputWithContext(context.Context) ExtenderprofileCellularSmsNotificationAlertPtrOutput
}

ExtenderprofileCellularSmsNotificationAlertPtrInput is an input type that accepts ExtenderprofileCellularSmsNotificationAlertArgs, ExtenderprofileCellularSmsNotificationAlertPtr and ExtenderprofileCellularSmsNotificationAlertPtrOutput values. You can construct a concrete instance of `ExtenderprofileCellularSmsNotificationAlertPtrInput` via: 

        ExtenderprofileCellularSmsNotificationAlertArgs{...}

or:

        nil

func ExtenderprofileCellularSmsNotificationAlertPtr 

func ExtenderprofileCellularSmsNotificationAlertPtr(v *ExtenderprofileCellularSmsNotificationAlertArgs) ExtenderprofileCellularSmsNotificationAlertPtrInput

type ExtenderprofileCellularSmsNotificationAlertPtrOutput 

type ExtenderprofileCellularSmsNotificationAlertPtrOutput struct{ *pulumi.OutputState }

func (ExtenderprofileCellularSmsNotificationAlertPtrOutput) DataExhausted 

func (o ExtenderprofileCellularSmsNotificationAlertPtrOutput) DataExhausted() pulumi.StringPtrOutput

Display string when data exhausted.

func (ExtenderprofileCellularSmsNotificationAlertPtrOutput) Elem 

func (o ExtenderprofileCellularSmsNotificationAlertPtrOutput) Elem() ExtenderprofileCellularSmsNotificationAlertOutput

func (ExtenderprofileCellularSmsNotificationAlertPtrOutput) ElementType 

func (ExtenderprofileCellularSmsNotificationAlertPtrOutput) ElementType() reflect.Type

func (ExtenderprofileCellularSmsNotificationAlertPtrOutput) FgtBackupModeSwitch 

func (o ExtenderprofileCellularSmsNotificationAlertPtrOutput) FgtBackupModeSwitch() pulumi.StringPtrOutput

Display string when FortiGate backup mode switched.

func (ExtenderprofileCellularSmsNotificationAlertPtrOutput) LowSignalStrength 

func (o ExtenderprofileCellularSmsNotificationAlertPtrOutput) LowSignalStrength() pulumi.StringPtrOutput

Display string when signal strength is low.

func (ExtenderprofileCellularSmsNotificationAlertPtrOutput) ModeSwitch 

func (o ExtenderprofileCellularSmsNotificationAlertPtrOutput) ModeSwitch() pulumi.StringPtrOutput

Display string when mode is switched.

func (ExtenderprofileCellularSmsNotificationAlertPtrOutput) OsImageFallback 

func (o ExtenderprofileCellularSmsNotificationAlertPtrOutput) OsImageFallback() pulumi.StringPtrOutput

Display string when falling back to a previous OS image.

func (ExtenderprofileCellularSmsNotificationAlertPtrOutput) SessionDisconnect 

func (o ExtenderprofileCellularSmsNotificationAlertPtrOutput) SessionDisconnect() pulumi.StringPtrOutput

Display string when session disconnected.

func (ExtenderprofileCellularSmsNotificationAlertPtrOutput) SystemReboot 

func (o ExtenderprofileCellularSmsNotificationAlertPtrOutput) SystemReboot() pulumi.StringPtrOutput

Display string when system rebooted.

func (ExtenderprofileCellularSmsNotificationAlertPtrOutput) ToExtenderprofileCellularSmsNotificationAlertPtrOutput 

func (o ExtenderprofileCellularSmsNotificationAlertPtrOutput) ToExtenderprofileCellularSmsNotificationAlertPtrOutput() ExtenderprofileCellularSmsNotificationAlertPtrOutput

func (ExtenderprofileCellularSmsNotificationAlertPtrOutput) ToExtenderprofileCellularSmsNotificationAlertPtrOutputWithContext 

func (o ExtenderprofileCellularSmsNotificationAlertPtrOutput) ToExtenderprofileCellularSmsNotificationAlertPtrOutputWithContext(ctx context.Context) ExtenderprofileCellularSmsNotificationAlertPtrOutput

type ExtenderprofileCellularSmsNotificationArgs 

type ExtenderprofileCellularSmsNotificationArgs struct {
	// SMS alert list. The structure of `alert` block is documented below.
	Alert ExtenderprofileCellularSmsNotificationAlertPtrInput `pulumi:"alert"`
	// SMS notification receiver list. The structure of `receiver` block is documented below.
	Receivers ExtenderprofileCellularSmsNotificationReceiverArrayInput `pulumi:"receivers"`
	// FortiExtender SMS notification status. Valid values: `disable`, `enable`.
	Status pulumi.StringPtrInput `pulumi:"status"`
}

func (ExtenderprofileCellularSmsNotificationArgs) ElementType 

func (ExtenderprofileCellularSmsNotificationArgs) ElementType() reflect.Type

func (ExtenderprofileCellularSmsNotificationArgs) ToExtenderprofileCellularSmsNotificationOutput 

func (i ExtenderprofileCellularSmsNotificationArgs) ToExtenderprofileCellularSmsNotificationOutput() ExtenderprofileCellularSmsNotificationOutput

func (ExtenderprofileCellularSmsNotificationArgs) ToExtenderprofileCellularSmsNotificationOutputWithContext 

func (i ExtenderprofileCellularSmsNotificationArgs) ToExtenderprofileCellularSmsNotificationOutputWithContext(ctx context.Context) ExtenderprofileCellularSmsNotificationOutput

func (ExtenderprofileCellularSmsNotificationArgs) ToExtenderprofileCellularSmsNotificationPtrOutput 

func (i ExtenderprofileCellularSmsNotificationArgs) ToExtenderprofileCellularSmsNotificationPtrOutput() ExtenderprofileCellularSmsNotificationPtrOutput

func (ExtenderprofileCellularSmsNotificationArgs) ToExtenderprofileCellularSmsNotificationPtrOutputWithContext 

func (i ExtenderprofileCellularSmsNotificationArgs) ToExtenderprofileCellularSmsNotificationPtrOutputWithContext(ctx context.Context) ExtenderprofileCellularSmsNotificationPtrOutput

type ExtenderprofileCellularSmsNotificationInput 

type ExtenderprofileCellularSmsNotificationInput interface {
	pulumi.Input

	ToExtenderprofileCellularSmsNotificationOutput() ExtenderprofileCellularSmsNotificationOutput
	ToExtenderprofileCellularSmsNotificationOutputWithContext(context.Context) ExtenderprofileCellularSmsNotificationOutput
}

ExtenderprofileCellularSmsNotificationInput is an input type that accepts ExtenderprofileCellularSmsNotificationArgs and ExtenderprofileCellularSmsNotificationOutput values. You can construct a concrete instance of `ExtenderprofileCellularSmsNotificationInput` via: 

ExtenderprofileCellularSmsNotificationArgs{...}

type ExtenderprofileCellularSmsNotificationOutput 

type ExtenderprofileCellularSmsNotificationOutput struct{ *pulumi.OutputState }

func (ExtenderprofileCellularSmsNotificationOutput) Alert 

func (o ExtenderprofileCellularSmsNotificationOutput) Alert() ExtenderprofileCellularSmsNotificationAlertPtrOutput

SMS alert list. The structure of `alert` block is documented below.

func (ExtenderprofileCellularSmsNotificationOutput) ElementType 

func (ExtenderprofileCellularSmsNotificationOutput) ElementType() reflect.Type

func (ExtenderprofileCellularSmsNotificationOutput) Receivers 

func (o ExtenderprofileCellularSmsNotificationOutput) Receivers() ExtenderprofileCellularSmsNotificationReceiverArrayOutput

SMS notification receiver list. The structure of `receiver` block is documented below.

func (ExtenderprofileCellularSmsNotificationOutput) Status 

func (o ExtenderprofileCellularSmsNotificationOutput) Status() pulumi.StringPtrOutput

FortiExtender SMS notification status. Valid values: `disable`, `enable`.

func (ExtenderprofileCellularSmsNotificationOutput) ToExtenderprofileCellularSmsNotificationOutput 

func (o ExtenderprofileCellularSmsNotificationOutput) ToExtenderprofileCellularSmsNotificationOutput() ExtenderprofileCellularSmsNotificationOutput

func (ExtenderprofileCellularSmsNotificationOutput) ToExtenderprofileCellularSmsNotificationOutputWithContext 

func (o ExtenderprofileCellularSmsNotificationOutput) ToExtenderprofileCellularSmsNotificationOutputWithContext(ctx context.Context) ExtenderprofileCellularSmsNotificationOutput

func (ExtenderprofileCellularSmsNotificationOutput) ToExtenderprofileCellularSmsNotificationPtrOutput 

func (o ExtenderprofileCellularSmsNotificationOutput) ToExtenderprofileCellularSmsNotificationPtrOutput() ExtenderprofileCellularSmsNotificationPtrOutput

func (ExtenderprofileCellularSmsNotificationOutput) ToExtenderprofileCellularSmsNotificationPtrOutputWithContext 

func (o ExtenderprofileCellularSmsNotificationOutput) ToExtenderprofileCellularSmsNotificationPtrOutputWithContext(ctx context.Context) ExtenderprofileCellularSmsNotificationPtrOutput

type ExtenderprofileCellularSmsNotificationPtrInput 

type ExtenderprofileCellularSmsNotificationPtrInput interface {
	pulumi.Input

	ToExtenderprofileCellularSmsNotificationPtrOutput() ExtenderprofileCellularSmsNotificationPtrOutput
	ToExtenderprofileCellularSmsNotificationPtrOutputWithContext(context.Context) ExtenderprofileCellularSmsNotificationPtrOutput
}

ExtenderprofileCellularSmsNotificationPtrInput is an input type that accepts ExtenderprofileCellularSmsNotificationArgs, ExtenderprofileCellularSmsNotificationPtr and ExtenderprofileCellularSmsNotificationPtrOutput values. You can construct a concrete instance of `ExtenderprofileCellularSmsNotificationPtrInput` via: 

        ExtenderprofileCellularSmsNotificationArgs{...}

or:

        nil

func ExtenderprofileCellularSmsNotificationPtr 

func ExtenderprofileCellularSmsNotificationPtr(v *ExtenderprofileCellularSmsNotificationArgs) ExtenderprofileCellularSmsNotificationPtrInput

type ExtenderprofileCellularSmsNotificationPtrOutput 

type ExtenderprofileCellularSmsNotificationPtrOutput struct{ *pulumi.OutputState }

func (ExtenderprofileCellularSmsNotificationPtrOutput) Alert 

func (o ExtenderprofileCellularSmsNotificationPtrOutput) Alert() ExtenderprofileCellularSmsNotificationAlertPtrOutput

SMS alert list. The structure of `alert` block is documented below.

func (ExtenderprofileCellularSmsNotificationPtrOutput) Elem 

func (o ExtenderprofileCellularSmsNotificationPtrOutput) Elem() ExtenderprofileCellularSmsNotificationOutput

func (ExtenderprofileCellularSmsNotificationPtrOutput) ElementType 

func (ExtenderprofileCellularSmsNotificationPtrOutput) ElementType() reflect.Type

func (ExtenderprofileCellularSmsNotificationPtrOutput) Receivers 

func (o ExtenderprofileCellularSmsNotificationPtrOutput) Receivers() ExtenderprofileCellularSmsNotificationReceiverArrayOutput

SMS notification receiver list. The structure of `receiver` block is documented below.

func (ExtenderprofileCellularSmsNotificationPtrOutput) Status 

func (o ExtenderprofileCellularSmsNotificationPtrOutput) Status() pulumi.StringPtrOutput

FortiExtender SMS notification status. Valid values: `disable`, `enable`.

func (ExtenderprofileCellularSmsNotificationPtrOutput) ToExtenderprofileCellularSmsNotificationPtrOutput 

func (o ExtenderprofileCellularSmsNotificationPtrOutput) ToExtenderprofileCellularSmsNotificationPtrOutput() ExtenderprofileCellularSmsNotificationPtrOutput

func (ExtenderprofileCellularSmsNotificationPtrOutput) ToExtenderprofileCellularSmsNotificationPtrOutputWithContext 

func (o ExtenderprofileCellularSmsNotificationPtrOutput) ToExtenderprofileCellularSmsNotificationPtrOutputWithContext(ctx context.Context) ExtenderprofileCellularSmsNotificationPtrOutput

type ExtenderprofileCellularSmsNotificationReceiver 

type ExtenderprofileCellularSmsNotificationReceiver struct {
	// Alert multi-options. Valid values: `system-reboot`, `data-exhausted`, `session-disconnect`, `low-signal-strength`, `mode-switch`, `os-image-fallback`, `fgt-backup-mode-switch`.
	//
	// The `modem1` block supports:
	Alert *string `pulumi:"alert"`
	// FortiExtender SMS notification receiver name.
	Name *string `pulumi:"name"`
	// Receiver phone number.  Format: [+][country code][area code][local phone number].  For example: +16501234567.
	PhoneNumber *string `pulumi:"phoneNumber"`
	// SMS notification receiver status. Valid values: `disable`, `enable`.
	Status *string `pulumi:"status"`
}

type ExtenderprofileCellularSmsNotificationReceiverArgs 

type ExtenderprofileCellularSmsNotificationReceiverArgs struct {
	// Alert multi-options. Valid values: `system-reboot`, `data-exhausted`, `session-disconnect`, `low-signal-strength`, `mode-switch`, `os-image-fallback`, `fgt-backup-mode-switch`.
	//
	// The `modem1` block supports:
	Alert pulumi.StringPtrInput `pulumi:"alert"`
	// FortiExtender SMS notification receiver name.
	Name pulumi.StringPtrInput `pulumi:"name"`
	// Receiver phone number.  Format: [+][country code][area code][local phone number].  For example: +16501234567.
	PhoneNumber pulumi.StringPtrInput `pulumi:"phoneNumber"`
	// SMS notification receiver status. Valid values: `disable`, `enable`.
	Status pulumi.StringPtrInput `pulumi:"status"`
}

func (ExtenderprofileCellularSmsNotificationReceiverArgs) ElementType 

func (ExtenderprofileCellularSmsNotificationReceiverArgs) ElementType() reflect.Type

func (ExtenderprofileCellularSmsNotificationReceiverArgs) ToExtenderprofileCellularSmsNotificationReceiverOutput 

func (i ExtenderprofileCellularSmsNotificationReceiverArgs) ToExtenderprofileCellularSmsNotificationReceiverOutput() ExtenderprofileCellularSmsNotificationReceiverOutput

func (ExtenderprofileCellularSmsNotificationReceiverArgs) ToExtenderprofileCellularSmsNotificationReceiverOutputWithContext 

func (i ExtenderprofileCellularSmsNotificationReceiverArgs) ToExtenderprofileCellularSmsNotificationReceiverOutputWithContext(ctx context.Context) ExtenderprofileCellularSmsNotificationReceiverOutput

type ExtenderprofileCellularSmsNotificationReceiverArray 

type ExtenderprofileCellularSmsNotificationReceiverArray []ExtenderprofileCellularSmsNotificationReceiverInput

func (ExtenderprofileCellularSmsNotificationReceiverArray) ElementType 

func (ExtenderprofileCellularSmsNotificationReceiverArray) ElementType() reflect.Type

func (ExtenderprofileCellularSmsNotificationReceiverArray) ToExtenderprofileCellularSmsNotificationReceiverArrayOutput 

func (i ExtenderprofileCellularSmsNotificationReceiverArray) ToExtenderprofileCellularSmsNotificationReceiverArrayOutput() ExtenderprofileCellularSmsNotificationReceiverArrayOutput

func (ExtenderprofileCellularSmsNotificationReceiverArray) ToExtenderprofileCellularSmsNotificationReceiverArrayOutputWithContext 

func (i ExtenderprofileCellularSmsNotificationReceiverArray) ToExtenderprofileCellularSmsNotificationReceiverArrayOutputWithContext(ctx context.Context) ExtenderprofileCellularSmsNotificationReceiverArrayOutput

type ExtenderprofileCellularSmsNotificationReceiverArrayInput 

type ExtenderprofileCellularSmsNotificationReceiverArrayInput interface {
	pulumi.Input

	ToExtenderprofileCellularSmsNotificationReceiverArrayOutput() ExtenderprofileCellularSmsNotificationReceiverArrayOutput
	ToExtenderprofileCellularSmsNotificationReceiverArrayOutputWithContext(context.Context) ExtenderprofileCellularSmsNotificationReceiverArrayOutput
}

ExtenderprofileCellularSmsNotificationReceiverArrayInput is an input type that accepts ExtenderprofileCellularSmsNotificationReceiverArray and ExtenderprofileCellularSmsNotificationReceiverArrayOutput values. You can construct a concrete instance of `ExtenderprofileCellularSmsNotificationReceiverArrayInput` via: 

ExtenderprofileCellularSmsNotificationReceiverArray{ ExtenderprofileCellularSmsNotificationReceiverArgs{...} }

type ExtenderprofileCellularSmsNotificationReceiverArrayOutput 

type ExtenderprofileCellularSmsNotificationReceiverArrayOutput struct{ *pulumi.OutputState }

func (ExtenderprofileCellularSmsNotificationReceiverArrayOutput) ElementType 

func (ExtenderprofileCellularSmsNotificationReceiverArrayOutput) ElementType() reflect.Type

func (ExtenderprofileCellularSmsNotificationReceiverArrayOutput) Index 

func (o ExtenderprofileCellularSmsNotificationReceiverArrayOutput) Index(i pulumi.IntInput) ExtenderprofileCellularSmsNotificationReceiverOutput

func (ExtenderprofileCellularSmsNotificationReceiverArrayOutput) ToExtenderprofileCellularSmsNotificationReceiverArrayOutput 

func (o ExtenderprofileCellularSmsNotificationReceiverArrayOutput) ToExtenderprofileCellularSmsNotificationReceiverArrayOutput() ExtenderprofileCellularSmsNotificationReceiverArrayOutput

func (ExtenderprofileCellularSmsNotificationReceiverArrayOutput) ToExtenderprofileCellularSmsNotificationReceiverArrayOutputWithContext 

func (o ExtenderprofileCellularSmsNotificationReceiverArrayOutput) ToExtenderprofileCellularSmsNotificationReceiverArrayOutputWithContext(ctx context.Context) ExtenderprofileCellularSmsNotificationReceiverArrayOutput

type ExtenderprofileCellularSmsNotificationReceiverInput 

type ExtenderprofileCellularSmsNotificationReceiverInput interface {
	pulumi.Input

	ToExtenderprofileCellularSmsNotificationReceiverOutput() ExtenderprofileCellularSmsNotificationReceiverOutput
	ToExtenderprofileCellularSmsNotificationReceiverOutputWithContext(context.Context) ExtenderprofileCellularSmsNotificationReceiverOutput
}

ExtenderprofileCellularSmsNotificationReceiverInput is an input type that accepts ExtenderprofileCellularSmsNotificationReceiverArgs and ExtenderprofileCellularSmsNotificationReceiverOutput values. You can construct a concrete instance of `ExtenderprofileCellularSmsNotificationReceiverInput` via: 

ExtenderprofileCellularSmsNotificationReceiverArgs{...}

type ExtenderprofileCellularSmsNotificationReceiverOutput 

type ExtenderprofileCellularSmsNotificationReceiverOutput struct{ *pulumi.OutputState }

func (ExtenderprofileCellularSmsNotificationReceiverOutput) Alert 

func (o ExtenderprofileCellularSmsNotificationReceiverOutput) Alert() pulumi.StringPtrOutput

Alert multi-options. Valid values: `system-reboot`, `data-exhausted`, `session-disconnect`, `low-signal-strength`, `mode-switch`, `os-image-fallback`, `fgt-backup-mode-switch`.

The `modem1` block supports:

func (ExtenderprofileCellularSmsNotificationReceiverOutput) ElementType 

func (ExtenderprofileCellularSmsNotificationReceiverOutput) ElementType() reflect.Type

func (ExtenderprofileCellularSmsNotificationReceiverOutput) Name 

func (o ExtenderprofileCellularSmsNotificationReceiverOutput) Name() pulumi.StringPtrOutput

FortiExtender SMS notification receiver name.

func (ExtenderprofileCellularSmsNotificationReceiverOutput) PhoneNumber 

func (o ExtenderprofileCellularSmsNotificationReceiverOutput) PhoneNumber() pulumi.StringPtrOutput

Receiver phone number. Format: [+][country code][area code][local phone number]. For example: +16501234567.

func (ExtenderprofileCellularSmsNotificationReceiverOutput) Status 

func (o ExtenderprofileCellularSmsNotificationReceiverOutput) Status() pulumi.StringPtrOutput

SMS notification receiver status. Valid values: `disable`, `enable`.

func (ExtenderprofileCellularSmsNotificationReceiverOutput) ToExtenderprofileCellularSmsNotificationReceiverOutput 

func (o ExtenderprofileCellularSmsNotificationReceiverOutput) ToExtenderprofileCellularSmsNotificationReceiverOutput() ExtenderprofileCellularSmsNotificationReceiverOutput

func (ExtenderprofileCellularSmsNotificationReceiverOutput) ToExtenderprofileCellularSmsNotificationReceiverOutputWithContext 

func (o ExtenderprofileCellularSmsNotificationReceiverOutput) ToExtenderprofileCellularSmsNotificationReceiverOutputWithContext(ctx context.Context) ExtenderprofileCellularSmsNotificationReceiverOutput

type ExtenderprofileInput 

type ExtenderprofileInput interface {
	pulumi.Input

	ToExtenderprofileOutput() ExtenderprofileOutput
	ToExtenderprofileOutputWithContext(ctx context.Context) ExtenderprofileOutput
}

type ExtenderprofileLanExtension 

type ExtenderprofileLanExtension struct {
	// IPsec phase1 interface.
	BackhaulInterface *string `pulumi:"backhaulInterface"`
	// IPsec phase1 IPv4/FQDN. Used to specify the external IP/FQDN when the FortiGate unit is behind a NAT device.
	BackhaulIp *string `pulumi:"backhaulIp"`
	// LAN extension backhaul tunnel configuration. The structure of `backhaul` block is documented below.
	Backhauls []ExtenderprofileLanExtensionBackhaul `pulumi:"backhauls"`
	// IPsec tunnel name.
	IpsecTunnel *string `pulumi:"ipsecTunnel"`
	// LAN extension link load balance strategy. Valid values: `activebackup`, `loadbalance`.
	LinkLoadbalance *string `pulumi:"linkLoadbalance"`
}

type ExtenderprofileLanExtensionArgs 

type ExtenderprofileLanExtensionArgs struct {
	// IPsec phase1 interface.
	BackhaulInterface pulumi.StringPtrInput `pulumi:"backhaulInterface"`
	// IPsec phase1 IPv4/FQDN. Used to specify the external IP/FQDN when the FortiGate unit is behind a NAT device.
	BackhaulIp pulumi.StringPtrInput `pulumi:"backhaulIp"`
	// LAN extension backhaul tunnel configuration. The structure of `backhaul` block is documented below.
	Backhauls ExtenderprofileLanExtensionBackhaulArrayInput `pulumi:"backhauls"`
	// IPsec tunnel name.
	IpsecTunnel pulumi.StringPtrInput `pulumi:"ipsecTunnel"`
	// LAN extension link load balance strategy. Valid values: `activebackup`, `loadbalance`.
	LinkLoadbalance pulumi.StringPtrInput `pulumi:"linkLoadbalance"`
}

func (ExtenderprofileLanExtensionArgs) ElementType 

func (ExtenderprofileLanExtensionArgs) ElementType() reflect.Type

func (ExtenderprofileLanExtensionArgs) ToExtenderprofileLanExtensionOutput 

func (i ExtenderprofileLanExtensionArgs) ToExtenderprofileLanExtensionOutput() ExtenderprofileLanExtensionOutput

func (ExtenderprofileLanExtensionArgs) ToExtenderprofileLanExtensionOutputWithContext 

func (i ExtenderprofileLanExtensionArgs) ToExtenderprofileLanExtensionOutputWithContext(ctx context.Context) ExtenderprofileLanExtensionOutput

func (ExtenderprofileLanExtensionArgs) ToExtenderprofileLanExtensionPtrOutput 

func (i ExtenderprofileLanExtensionArgs) ToExtenderprofileLanExtensionPtrOutput() ExtenderprofileLanExtensionPtrOutput

func (ExtenderprofileLanExtensionArgs) ToExtenderprofileLanExtensionPtrOutputWithContext 

func (i ExtenderprofileLanExtensionArgs) ToExtenderprofileLanExtensionPtrOutputWithContext(ctx context.Context) ExtenderprofileLanExtensionPtrOutput

type ExtenderprofileLanExtensionBackhaul 

type ExtenderprofileLanExtensionBackhaul struct {
	// FortiExtender LAN extension backhaul name
	Name *string `pulumi:"name"`
	// FortiExtender uplink port. Valid values: `wan`, `lte1`, `lte2`, `port1`, `port2`, `port3`, `port4`, `port5`, `sfp`.
	Port *string `pulumi:"port"`
	// FortiExtender uplink port. Valid values: `primary`, `secondary`.
	Role *string `pulumi:"role"`
	// WRR weight parameter
	Weight *int `pulumi:"weight"`
}

type ExtenderprofileLanExtensionBackhaulArgs 

type ExtenderprofileLanExtensionBackhaulArgs struct {
	// FortiExtender LAN extension backhaul name
	Name pulumi.StringPtrInput `pulumi:"name"`
	// FortiExtender uplink port. Valid values: `wan`, `lte1`, `lte2`, `port1`, `port2`, `port3`, `port4`, `port5`, `sfp`.
	Port pulumi.StringPtrInput `pulumi:"port"`
	// FortiExtender uplink port. Valid values: `primary`, `secondary`.
	Role pulumi.StringPtrInput `pulumi:"role"`
	// WRR weight parameter
	Weight pulumi.IntPtrInput `pulumi:"weight"`
}

func (ExtenderprofileLanExtensionBackhaulArgs) ElementType 

func (ExtenderprofileLanExtensionBackhaulArgs) ElementType() reflect.Type

func (ExtenderprofileLanExtensionBackhaulArgs) ToExtenderprofileLanExtensionBackhaulOutput 

func (i ExtenderprofileLanExtensionBackhaulArgs) ToExtenderprofileLanExtensionBackhaulOutput() ExtenderprofileLanExtensionBackhaulOutput

func (ExtenderprofileLanExtensionBackhaulArgs) ToExtenderprofileLanExtensionBackhaulOutputWithContext 

func (i ExtenderprofileLanExtensionBackhaulArgs) ToExtenderprofileLanExtensionBackhaulOutputWithContext(ctx context.Context) ExtenderprofileLanExtensionBackhaulOutput

type ExtenderprofileLanExtensionBackhaulArray 

type ExtenderprofileLanExtensionBackhaulArray []ExtenderprofileLanExtensionBackhaulInput

func (ExtenderprofileLanExtensionBackhaulArray) ElementType 

func (ExtenderprofileLanExtensionBackhaulArray) ElementType() reflect.Type

func (ExtenderprofileLanExtensionBackhaulArray) ToExtenderprofileLanExtensionBackhaulArrayOutput 

func (i ExtenderprofileLanExtensionBackhaulArray) ToExtenderprofileLanExtensionBackhaulArrayOutput() ExtenderprofileLanExtensionBackhaulArrayOutput

func (ExtenderprofileLanExtensionBackhaulArray) ToExtenderprofileLanExtensionBackhaulArrayOutputWithContext 

func (i ExtenderprofileLanExtensionBackhaulArray) ToExtenderprofileLanExtensionBackhaulArrayOutputWithContext(ctx context.Context) ExtenderprofileLanExtensionBackhaulArrayOutput

type ExtenderprofileLanExtensionBackhaulArrayInput 

type ExtenderprofileLanExtensionBackhaulArrayInput interface {
	pulumi.Input

	ToExtenderprofileLanExtensionBackhaulArrayOutput() ExtenderprofileLanExtensionBackhaulArrayOutput
	ToExtenderprofileLanExtensionBackhaulArrayOutputWithContext(context.Context) ExtenderprofileLanExtensionBackhaulArrayOutput
}

ExtenderprofileLanExtensionBackhaulArrayInput is an input type that accepts ExtenderprofileLanExtensionBackhaulArray and ExtenderprofileLanExtensionBackhaulArrayOutput values. You can construct a concrete instance of `ExtenderprofileLanExtensionBackhaulArrayInput` via: 

ExtenderprofileLanExtensionBackhaulArray{ ExtenderprofileLanExtensionBackhaulArgs{...} }

type ExtenderprofileLanExtensionBackhaulArrayOutput 

type ExtenderprofileLanExtensionBackhaulArrayOutput struct{ *pulumi.OutputState }

func (ExtenderprofileLanExtensionBackhaulArrayOutput) ElementType 

func (ExtenderprofileLanExtensionBackhaulArrayOutput) ElementType() reflect.Type

func (ExtenderprofileLanExtensionBackhaulArrayOutput) Index 

func (o ExtenderprofileLanExtensionBackhaulArrayOutput) Index(i pulumi.IntInput) ExtenderprofileLanExtensionBackhaulOutput

func (ExtenderprofileLanExtensionBackhaulArrayOutput) ToExtenderprofileLanExtensionBackhaulArrayOutput 

func (o ExtenderprofileLanExtensionBackhaulArrayOutput) ToExtenderprofileLanExtensionBackhaulArrayOutput() ExtenderprofileLanExtensionBackhaulArrayOutput

func (ExtenderprofileLanExtensionBackhaulArrayOutput) ToExtenderprofileLanExtensionBackhaulArrayOutputWithContext 

func (o ExtenderprofileLanExtensionBackhaulArrayOutput) ToExtenderprofileLanExtensionBackhaulArrayOutputWithContext(ctx context.Context) ExtenderprofileLanExtensionBackhaulArrayOutput

type ExtenderprofileLanExtensionBackhaulInput 

type ExtenderprofileLanExtensionBackhaulInput interface {
	pulumi.Input

	ToExtenderprofileLanExtensionBackhaulOutput() ExtenderprofileLanExtensionBackhaulOutput
	ToExtenderprofileLanExtensionBackhaulOutputWithContext(context.Context) ExtenderprofileLanExtensionBackhaulOutput
}

ExtenderprofileLanExtensionBackhaulInput is an input type that accepts ExtenderprofileLanExtensionBackhaulArgs and ExtenderprofileLanExtensionBackhaulOutput values. You can construct a concrete instance of `ExtenderprofileLanExtensionBackhaulInput` via: 

ExtenderprofileLanExtensionBackhaulArgs{...}

type ExtenderprofileLanExtensionBackhaulOutput 

type ExtenderprofileLanExtensionBackhaulOutput struct{ *pulumi.OutputState }

func (ExtenderprofileLanExtensionBackhaulOutput) ElementType 

func (ExtenderprofileLanExtensionBackhaulOutput) ElementType() reflect.Type

func (ExtenderprofileLanExtensionBackhaulOutput) Name 

func (o ExtenderprofileLanExtensionBackhaulOutput) Name() pulumi.StringPtrOutput

FortiExtender LAN extension backhaul name

func (ExtenderprofileLanExtensionBackhaulOutput) Port 

func (o ExtenderprofileLanExtensionBackhaulOutput) Port() pulumi.StringPtrOutput

FortiExtender uplink port. Valid values: `wan`, `lte1`, `lte2`, `port1`, `port2`, `port3`, `port4`, `port5`, `sfp`.

func (ExtenderprofileLanExtensionBackhaulOutput) Role 

func (o ExtenderprofileLanExtensionBackhaulOutput) Role() pulumi.StringPtrOutput

FortiExtender uplink port. Valid values: `primary`, `secondary`.

func (ExtenderprofileLanExtensionBackhaulOutput) ToExtenderprofileLanExtensionBackhaulOutput 

func (o ExtenderprofileLanExtensionBackhaulOutput) ToExtenderprofileLanExtensionBackhaulOutput() ExtenderprofileLanExtensionBackhaulOutput

func (ExtenderprofileLanExtensionBackhaulOutput) ToExtenderprofileLanExtensionBackhaulOutputWithContext 

func (o ExtenderprofileLanExtensionBackhaulOutput) ToExtenderprofileLanExtensionBackhaulOutputWithContext(ctx context.Context) ExtenderprofileLanExtensionBackhaulOutput

func (ExtenderprofileLanExtensionBackhaulOutput) Weight 

func (o ExtenderprofileLanExtensionBackhaulOutput) Weight() pulumi.IntPtrOutput

WRR weight parameter

type ExtenderprofileLanExtensionInput 

type ExtenderprofileLanExtensionInput interface {
	pulumi.Input

	ToExtenderprofileLanExtensionOutput() ExtenderprofileLanExtensionOutput
	ToExtenderprofileLanExtensionOutputWithContext(context.Context) ExtenderprofileLanExtensionOutput
}

ExtenderprofileLanExtensionInput is an input type that accepts ExtenderprofileLanExtensionArgs and ExtenderprofileLanExtensionOutput values. You can construct a concrete instance of `ExtenderprofileLanExtensionInput` via: 

ExtenderprofileLanExtensionArgs{...}

type ExtenderprofileLanExtensionOutput 

type ExtenderprofileLanExtensionOutput struct{ *pulumi.OutputState }

func (ExtenderprofileLanExtensionOutput) BackhaulInterface 

func (o ExtenderprofileLanExtensionOutput) BackhaulInterface() pulumi.StringPtrOutput

IPsec phase1 interface.

func (ExtenderprofileLanExtensionOutput) BackhaulIp 

func (o ExtenderprofileLanExtensionOutput) BackhaulIp() pulumi.StringPtrOutput

IPsec phase1 IPv4/FQDN. Used to specify the external IP/FQDN when the FortiGate unit is behind a NAT device.

func (ExtenderprofileLanExtensionOutput) Backhauls 

func (o ExtenderprofileLanExtensionOutput) Backhauls() ExtenderprofileLanExtensionBackhaulArrayOutput

LAN extension backhaul tunnel configuration. The structure of `backhaul` block is documented below.

func (ExtenderprofileLanExtensionOutput) ElementType 

func (ExtenderprofileLanExtensionOutput) ElementType() reflect.Type

func (ExtenderprofileLanExtensionOutput) IpsecTunnel 

func (o ExtenderprofileLanExtensionOutput) IpsecTunnel() pulumi.StringPtrOutput

IPsec tunnel name.

func (ExtenderprofileLanExtensionOutput) LinkLoadbalance 

func (o ExtenderprofileLanExtensionOutput) LinkLoadbalance() pulumi.StringPtrOutput

LAN extension link load balance strategy. Valid values: `activebackup`, `loadbalance`.

func (ExtenderprofileLanExtensionOutput) ToExtenderprofileLanExtensionOutput 

func (o ExtenderprofileLanExtensionOutput) ToExtenderprofileLanExtensionOutput() ExtenderprofileLanExtensionOutput

func (ExtenderprofileLanExtensionOutput) ToExtenderprofileLanExtensionOutputWithContext 

func (o ExtenderprofileLanExtensionOutput) ToExtenderprofileLanExtensionOutputWithContext(ctx context.Context) ExtenderprofileLanExtensionOutput

func (ExtenderprofileLanExtensionOutput) ToExtenderprofileLanExtensionPtrOutput 

func (o ExtenderprofileLanExtensionOutput) ToExtenderprofileLanExtensionPtrOutput() ExtenderprofileLanExtensionPtrOutput

func (ExtenderprofileLanExtensionOutput) ToExtenderprofileLanExtensionPtrOutputWithContext 

func (o ExtenderprofileLanExtensionOutput) ToExtenderprofileLanExtensionPtrOutputWithContext(ctx context.Context) ExtenderprofileLanExtensionPtrOutput

type ExtenderprofileLanExtensionPtrInput 

type ExtenderprofileLanExtensionPtrInput interface {
	pulumi.Input

	ToExtenderprofileLanExtensionPtrOutput() ExtenderprofileLanExtensionPtrOutput
	ToExtenderprofileLanExtensionPtrOutputWithContext(context.Context) ExtenderprofileLanExtensionPtrOutput
}

ExtenderprofileLanExtensionPtrInput is an input type that accepts ExtenderprofileLanExtensionArgs, ExtenderprofileLanExtensionPtr and ExtenderprofileLanExtensionPtrOutput values. You can construct a concrete instance of `ExtenderprofileLanExtensionPtrInput` via: 

        ExtenderprofileLanExtensionArgs{...}

or:

        nil

func ExtenderprofileLanExtensionPtr 

func ExtenderprofileLanExtensionPtr(v *ExtenderprofileLanExtensionArgs) ExtenderprofileLanExtensionPtrInput

type ExtenderprofileLanExtensionPtrOutput 

type ExtenderprofileLanExtensionPtrOutput struct{ *pulumi.OutputState }

func (ExtenderprofileLanExtensionPtrOutput) BackhaulInterface 

func (o ExtenderprofileLanExtensionPtrOutput) BackhaulInterface() pulumi.StringPtrOutput

IPsec phase1 interface.

func (ExtenderprofileLanExtensionPtrOutput) BackhaulIp 

func (o ExtenderprofileLanExtensionPtrOutput) BackhaulIp() pulumi.StringPtrOutput

IPsec phase1 IPv4/FQDN. Used to specify the external IP/FQDN when the FortiGate unit is behind a NAT device.

func (ExtenderprofileLanExtensionPtrOutput) Backhauls 

func (o ExtenderprofileLanExtensionPtrOutput) Backhauls() ExtenderprofileLanExtensionBackhaulArrayOutput

LAN extension backhaul tunnel configuration. The structure of `backhaul` block is documented below.

func (ExtenderprofileLanExtensionPtrOutput) Elem 

func (o ExtenderprofileLanExtensionPtrOutput) Elem() ExtenderprofileLanExtensionOutput

func (ExtenderprofileLanExtensionPtrOutput) ElementType 

func (ExtenderprofileLanExtensionPtrOutput) ElementType() reflect.Type

func (ExtenderprofileLanExtensionPtrOutput) IpsecTunnel 

func (o ExtenderprofileLanExtensionPtrOutput) IpsecTunnel() pulumi.StringPtrOutput

IPsec tunnel name.

func (ExtenderprofileLanExtensionPtrOutput) LinkLoadbalance 

func (o ExtenderprofileLanExtensionPtrOutput) LinkLoadbalance() pulumi.StringPtrOutput

LAN extension link load balance strategy. Valid values: `activebackup`, `loadbalance`.

func (ExtenderprofileLanExtensionPtrOutput) ToExtenderprofileLanExtensionPtrOutput 

func (o ExtenderprofileLanExtensionPtrOutput) ToExtenderprofileLanExtensionPtrOutput() ExtenderprofileLanExtensionPtrOutput

func (ExtenderprofileLanExtensionPtrOutput) ToExtenderprofileLanExtensionPtrOutputWithContext 

func (o ExtenderprofileLanExtensionPtrOutput) ToExtenderprofileLanExtensionPtrOutputWithContext(ctx context.Context) ExtenderprofileLanExtensionPtrOutput

type ExtenderprofileMap 

type ExtenderprofileMap map[string]ExtenderprofileInput

func (ExtenderprofileMap) ElementType 

func (ExtenderprofileMap) ElementType() reflect.Type

func (ExtenderprofileMap) ToExtenderprofileMapOutput 

func (i ExtenderprofileMap) ToExtenderprofileMapOutput() ExtenderprofileMapOutput

func (ExtenderprofileMap) ToExtenderprofileMapOutputWithContext 

func (i ExtenderprofileMap) ToExtenderprofileMapOutputWithContext(ctx context.Context) ExtenderprofileMapOutput

type ExtenderprofileMapInput 

type ExtenderprofileMapInput interface {
	pulumi.Input

	ToExtenderprofileMapOutput() ExtenderprofileMapOutput
	ToExtenderprofileMapOutputWithContext(context.Context) ExtenderprofileMapOutput
}

ExtenderprofileMapInput is an input type that accepts ExtenderprofileMap and ExtenderprofileMapOutput values. You can construct a concrete instance of `ExtenderprofileMapInput` via: 

ExtenderprofileMap{ "key": ExtenderprofileArgs{...} }

type ExtenderprofileMapOutput 

type ExtenderprofileMapOutput struct{ *pulumi.OutputState }

func (ExtenderprofileMapOutput) ElementType 

func (ExtenderprofileMapOutput) ElementType() reflect.Type

func (ExtenderprofileMapOutput) MapIndex 

func (o ExtenderprofileMapOutput) MapIndex(k pulumi.StringInput) ExtenderprofileOutput

func (ExtenderprofileMapOutput) ToExtenderprofileMapOutput 

func (o ExtenderprofileMapOutput) ToExtenderprofileMapOutput() ExtenderprofileMapOutput

func (ExtenderprofileMapOutput) ToExtenderprofileMapOutputWithContext 

func (o ExtenderprofileMapOutput) ToExtenderprofileMapOutputWithContext(ctx context.Context) ExtenderprofileMapOutput

type ExtenderprofileOutput 

type ExtenderprofileOutput struct{ *pulumi.OutputState }

func (ExtenderprofileOutput) Allowaccess 

func (o ExtenderprofileOutput) Allowaccess() pulumi.StringOutput

Control management access to the managed extender. Separate entries with a space. Valid values: `ping`, `telnet`, `http`, `https`, `ssh`, `snmp`.

func (ExtenderprofileOutput) BandwidthLimit 

func (o ExtenderprofileOutput) BandwidthLimit() pulumi.IntOutput

FortiExtender LAN extension bandwidth limit (Mbps).

func (ExtenderprofileOutput) Cellular 

func (o ExtenderprofileOutput) Cellular() ExtenderprofileCellularOutput

FortiExtender cellular configuration. The structure of `cellular` block is documented below.

func (ExtenderprofileOutput) ElementType 

func (ExtenderprofileOutput) ElementType() reflect.Type

func (ExtenderprofileOutput) EnforceBandwidth 

func (o ExtenderprofileOutput) EnforceBandwidth() pulumi.StringOutput

Enable/disable enforcement of bandwidth on LAN extension interface. Valid values: `enable`, `disable`.

func (ExtenderprofileOutput) Extension 

func (o ExtenderprofileOutput) Extension() pulumi.StringOutput

Extension option. Valid values: `wan-extension`, `lan-extension`.

func (ExtenderprofileOutput) Fosid 

func (o ExtenderprofileOutput) Fosid() pulumi.IntOutput

id

func (ExtenderprofileOutput) GetAllTables 

func (o ExtenderprofileOutput) GetAllTables() pulumi.StringPtrOutput

Get all sub-tables including unconfigured tables. Do not set this variable to true if you configure sub-table in another resource, otherwise, conflicts and overwrite will occur. Options: [ false, true ]. false: Default value, do not get unconfigured tables; true: get all tables including unconfigured tables.

func (ExtenderprofileOutput) LanExtension 

func (o ExtenderprofileOutput) LanExtension() ExtenderprofileLanExtensionOutput

FortiExtender lan extension configuration. The structure of `lanExtension` block is documented below.

func (ExtenderprofileOutput) LoginPassword 

func (o ExtenderprofileOutput) LoginPassword() pulumi.StringPtrOutput

Set the managed extender's administrator password.

func (ExtenderprofileOutput) LoginPasswordChange 

func (o ExtenderprofileOutput) LoginPasswordChange() pulumi.StringOutput

Change or reset the administrator password of a managed extender (yes, default, or no, default = no). Valid values: `yes`, `default`, `no`.

func (ExtenderprofileOutput) Model 

func (o ExtenderprofileOutput) Model() pulumi.StringOutput

Model.

func (ExtenderprofileOutput) Name 

func (o ExtenderprofileOutput) Name() pulumi.StringOutput

FortiExtender profile name

func (ExtenderprofileOutput) ToExtenderprofileOutput 

func (o ExtenderprofileOutput) ToExtenderprofileOutput() ExtenderprofileOutput

func (ExtenderprofileOutput) ToExtenderprofileOutputWithContext 

func (o ExtenderprofileOutput) ToExtenderprofileOutputWithContext(ctx context.Context) ExtenderprofileOutput

func (ExtenderprofileOutput) Vdomparam 

func (o ExtenderprofileOutput) Vdomparam() pulumi.StringOutput

Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.

type ExtenderprofileState 

type ExtenderprofileState struct {
	// Control management access to the managed extender. Separate entries with a space. Valid values: `ping`, `telnet`, `http`, `https`, `ssh`, `snmp`.
	Allowaccess pulumi.StringPtrInput
	// FortiExtender LAN extension bandwidth limit (Mbps).
	BandwidthLimit pulumi.IntPtrInput
	// FortiExtender cellular configuration. The structure of `cellular` block is documented below.
	Cellular ExtenderprofileCellularPtrInput
	// Enable/disable enforcement of bandwidth on LAN extension interface. Valid values: `enable`, `disable`.
	EnforceBandwidth pulumi.StringPtrInput
	// Extension option. Valid values: `wan-extension`, `lan-extension`.
	Extension pulumi.StringPtrInput
	// id
	Fosid pulumi.IntPtrInput
	// Get all sub-tables including unconfigured tables. Do not set this variable to true if you configure sub-table in another resource, otherwise, conflicts and overwrite will occur. Options: [ false, true ]. false: Default value, do not get unconfigured tables; true: get all tables including unconfigured tables.
	GetAllTables pulumi.StringPtrInput
	// FortiExtender lan extension configuration. The structure of `lanExtension` block is documented below.
	LanExtension ExtenderprofileLanExtensionPtrInput
	// Set the managed extender's administrator password.
	LoginPassword pulumi.StringPtrInput
	// Change or reset the administrator password of a managed extender (yes, default, or no, default = no). Valid values: `yes`, `default`, `no`.
	LoginPasswordChange pulumi.StringPtrInput
	// Model.
	Model pulumi.StringPtrInput
	// FortiExtender profile name
	Name pulumi.StringPtrInput
	// Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
	Vdomparam pulumi.StringPtrInput
}

func (ExtenderprofileState) ElementType 

func (ExtenderprofileState) ElementType() reflect.Type

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.