v1

package
v4.11.0 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Apr 18, 2024 License: Apache-2.0 Imports: 9 Imported by: 0

Documentation

Index

Constants

This section is empty.

Variables

This section is empty.

Functions

This section is empty.

Types

type Endpoint 

type Endpoint struct {
	// addresses of this endpoint. The contents of this field are interpreted according to the corresponding EndpointSlice addressType field. Consumers must handle different types of addresses in the context of their own capabilities. This must contain at least one address but no more than 100. These are all assumed to be fungible and clients may choose to only use the first element. Refer to: https://issue.k8s.io/106267
	Addresses []string `pulumi:"addresses"`
	// conditions contains information about the current status of the endpoint.
	Conditions *EndpointConditions `pulumi:"conditions"`
	// deprecatedTopology contains topology information part of the v1beta1 API. This field is deprecated, and will be removed when the v1beta1 API is removed (no sooner than kubernetes v1.24).  While this field can hold values, it is not writable through the v1 API, and any attempts to write to it will be silently ignored. Topology information can be found in the zone and nodeName fields instead.
	DeprecatedTopology map[string]string `pulumi:"deprecatedTopology"`
	// hints contains information associated with how an endpoint should be consumed.
	Hints *EndpointHints `pulumi:"hints"`
	// hostname of this endpoint. This field may be used by consumers of endpoints to distinguish endpoints from each other (e.g. in DNS names). Multiple endpoints which use the same hostname should be considered fungible (e.g. multiple A values in DNS). Must be lowercase and pass DNS Label (RFC 1123) validation.
	Hostname *string `pulumi:"hostname"`
	// nodeName represents the name of the Node hosting this endpoint. This can be used to determine endpoints local to a Node.
	NodeName *string `pulumi:"nodeName"`
	// targetRef is a reference to a Kubernetes object that represents this endpoint.
	TargetRef *corev1.ObjectReference `pulumi:"targetRef"`
	// zone is the name of the Zone this endpoint exists in.
	Zone *string `pulumi:"zone"`
}

Endpoint represents a single logical "backend" implementing a service.

type EndpointArgs 

type EndpointArgs struct {
	// addresses of this endpoint. The contents of this field are interpreted according to the corresponding EndpointSlice addressType field. Consumers must handle different types of addresses in the context of their own capabilities. This must contain at least one address but no more than 100. These are all assumed to be fungible and clients may choose to only use the first element. Refer to: https://issue.k8s.io/106267
	Addresses pulumi.StringArrayInput `pulumi:"addresses"`
	// conditions contains information about the current status of the endpoint.
	Conditions EndpointConditionsPtrInput `pulumi:"conditions"`
	// deprecatedTopology contains topology information part of the v1beta1 API. This field is deprecated, and will be removed when the v1beta1 API is removed (no sooner than kubernetes v1.24).  While this field can hold values, it is not writable through the v1 API, and any attempts to write to it will be silently ignored. Topology information can be found in the zone and nodeName fields instead.
	DeprecatedTopology pulumi.StringMapInput `pulumi:"deprecatedTopology"`
	// hints contains information associated with how an endpoint should be consumed.
	Hints EndpointHintsPtrInput `pulumi:"hints"`
	// hostname of this endpoint. This field may be used by consumers of endpoints to distinguish endpoints from each other (e.g. in DNS names). Multiple endpoints which use the same hostname should be considered fungible (e.g. multiple A values in DNS). Must be lowercase and pass DNS Label (RFC 1123) validation.
	Hostname pulumi.StringPtrInput `pulumi:"hostname"`
	// nodeName represents the name of the Node hosting this endpoint. This can be used to determine endpoints local to a Node.
	NodeName pulumi.StringPtrInput `pulumi:"nodeName"`
	// targetRef is a reference to a Kubernetes object that represents this endpoint.
	TargetRef corev1.ObjectReferencePtrInput `pulumi:"targetRef"`
	// zone is the name of the Zone this endpoint exists in.
	Zone pulumi.StringPtrInput `pulumi:"zone"`
}

Endpoint represents a single logical "backend" implementing a service.

func (EndpointArgs) ElementType 

func (EndpointArgs) ElementType() reflect.Type

func (EndpointArgs) ToEndpointOutput 

func (i EndpointArgs) ToEndpointOutput() EndpointOutput

func (EndpointArgs) ToEndpointOutputWithContext 

func (i EndpointArgs) ToEndpointOutputWithContext(ctx context.Context) EndpointOutput

type EndpointArray 

type EndpointArray []EndpointInput

func (EndpointArray) ElementType 

func (EndpointArray) ElementType() reflect.Type

func (EndpointArray) ToEndpointArrayOutput 

func (i EndpointArray) ToEndpointArrayOutput() EndpointArrayOutput

func (EndpointArray) ToEndpointArrayOutputWithContext 

func (i EndpointArray) ToEndpointArrayOutputWithContext(ctx context.Context) EndpointArrayOutput

type EndpointArrayInput 

type EndpointArrayInput interface {
	pulumi.Input

	ToEndpointArrayOutput() EndpointArrayOutput
	ToEndpointArrayOutputWithContext(context.Context) EndpointArrayOutput
}

EndpointArrayInput is an input type that accepts EndpointArray and EndpointArrayOutput values. You can construct a concrete instance of `EndpointArrayInput` via: 

EndpointArray{ EndpointArgs{...} }

type EndpointArrayOutput 

type EndpointArrayOutput struct{ *pulumi.OutputState }

func (EndpointArrayOutput) ElementType 

func (EndpointArrayOutput) ElementType() reflect.Type

func (EndpointArrayOutput) Index 

func (o EndpointArrayOutput) Index(i pulumi.IntInput) EndpointOutput

func (EndpointArrayOutput) ToEndpointArrayOutput 

func (o EndpointArrayOutput) ToEndpointArrayOutput() EndpointArrayOutput

func (EndpointArrayOutput) ToEndpointArrayOutputWithContext 

func (o EndpointArrayOutput) ToEndpointArrayOutputWithContext(ctx context.Context) EndpointArrayOutput

type EndpointConditions 

type EndpointConditions struct {
	// ready indicates that this endpoint is prepared to receive traffic, according to whatever system is managing the endpoint. A nil value indicates an unknown state. In most cases consumers should interpret this unknown state as ready. For compatibility reasons, ready should never be "true" for terminating endpoints, except when the normal readiness behavior is being explicitly overridden, for example when the associated Service has set the publishNotReadyAddresses flag.
	Ready *bool `pulumi:"ready"`
	// serving is identical to ready except that it is set regardless of the terminating state of endpoints. This condition should be set to true for a ready endpoint that is terminating. If nil, consumers should defer to the ready condition.
	Serving *bool `pulumi:"serving"`
	// terminating indicates that this endpoint is terminating. A nil value indicates an unknown state. Consumers should interpret this unknown state to mean that the endpoint is not terminating.
	Terminating *bool `pulumi:"terminating"`
}

EndpointConditions represents the current condition of an endpoint.

type EndpointConditionsArgs 

type EndpointConditionsArgs struct {
	// ready indicates that this endpoint is prepared to receive traffic, according to whatever system is managing the endpoint. A nil value indicates an unknown state. In most cases consumers should interpret this unknown state as ready. For compatibility reasons, ready should never be "true" for terminating endpoints, except when the normal readiness behavior is being explicitly overridden, for example when the associated Service has set the publishNotReadyAddresses flag.
	Ready pulumi.BoolPtrInput `pulumi:"ready"`
	// serving is identical to ready except that it is set regardless of the terminating state of endpoints. This condition should be set to true for a ready endpoint that is terminating. If nil, consumers should defer to the ready condition.
	Serving pulumi.BoolPtrInput `pulumi:"serving"`
	// terminating indicates that this endpoint is terminating. A nil value indicates an unknown state. Consumers should interpret this unknown state to mean that the endpoint is not terminating.
	Terminating pulumi.BoolPtrInput `pulumi:"terminating"`
}

EndpointConditions represents the current condition of an endpoint.

func (EndpointConditionsArgs) ElementType 

func (EndpointConditionsArgs) ElementType() reflect.Type

func (EndpointConditionsArgs) ToEndpointConditionsOutput 

func (i EndpointConditionsArgs) ToEndpointConditionsOutput() EndpointConditionsOutput

func (EndpointConditionsArgs) ToEndpointConditionsOutputWithContext 

func (i EndpointConditionsArgs) ToEndpointConditionsOutputWithContext(ctx context.Context) EndpointConditionsOutput

func (EndpointConditionsArgs) ToEndpointConditionsPtrOutput 

func (i EndpointConditionsArgs) ToEndpointConditionsPtrOutput() EndpointConditionsPtrOutput

func (EndpointConditionsArgs) ToEndpointConditionsPtrOutputWithContext 

func (i EndpointConditionsArgs) ToEndpointConditionsPtrOutputWithContext(ctx context.Context) EndpointConditionsPtrOutput

type EndpointConditionsInput 

type EndpointConditionsInput interface {
	pulumi.Input

	ToEndpointConditionsOutput() EndpointConditionsOutput
	ToEndpointConditionsOutputWithContext(context.Context) EndpointConditionsOutput
}

EndpointConditionsInput is an input type that accepts EndpointConditionsArgs and EndpointConditionsOutput values. You can construct a concrete instance of `EndpointConditionsInput` via: 

EndpointConditionsArgs{...}

type EndpointConditionsOutput 

type EndpointConditionsOutput struct{ *pulumi.OutputState }

EndpointConditions represents the current condition of an endpoint.

func (EndpointConditionsOutput) ElementType 

func (EndpointConditionsOutput) ElementType() reflect.Type

func (EndpointConditionsOutput) Ready 

func (o EndpointConditionsOutput) Ready() pulumi.BoolPtrOutput

ready indicates that this endpoint is prepared to receive traffic, according to whatever system is managing the endpoint. A nil value indicates an unknown state. In most cases consumers should interpret this unknown state as ready. For compatibility reasons, ready should never be "true" for terminating endpoints, except when the normal readiness behavior is being explicitly overridden, for example when the associated Service has set the publishNotReadyAddresses flag.

func (EndpointConditionsOutput) Serving 

func (o EndpointConditionsOutput) Serving() pulumi.BoolPtrOutput

serving is identical to ready except that it is set regardless of the terminating state of endpoints. This condition should be set to true for a ready endpoint that is terminating. If nil, consumers should defer to the ready condition.

func (EndpointConditionsOutput) Terminating 

func (o EndpointConditionsOutput) Terminating() pulumi.BoolPtrOutput

terminating indicates that this endpoint is terminating. A nil value indicates an unknown state. Consumers should interpret this unknown state to mean that the endpoint is not terminating.

func (EndpointConditionsOutput) ToEndpointConditionsOutput 

func (o EndpointConditionsOutput) ToEndpointConditionsOutput() EndpointConditionsOutput

func (EndpointConditionsOutput) ToEndpointConditionsOutputWithContext 

func (o EndpointConditionsOutput) ToEndpointConditionsOutputWithContext(ctx context.Context) EndpointConditionsOutput

func (EndpointConditionsOutput) ToEndpointConditionsPtrOutput 

func (o EndpointConditionsOutput) ToEndpointConditionsPtrOutput() EndpointConditionsPtrOutput

func (EndpointConditionsOutput) ToEndpointConditionsPtrOutputWithContext 

func (o EndpointConditionsOutput) ToEndpointConditionsPtrOutputWithContext(ctx context.Context) EndpointConditionsPtrOutput

type EndpointConditionsPatch 

type EndpointConditionsPatch struct {
	// ready indicates that this endpoint is prepared to receive traffic, according to whatever system is managing the endpoint. A nil value indicates an unknown state. In most cases consumers should interpret this unknown state as ready. For compatibility reasons, ready should never be "true" for terminating endpoints, except when the normal readiness behavior is being explicitly overridden, for example when the associated Service has set the publishNotReadyAddresses flag.
	Ready *bool `pulumi:"ready"`
	// serving is identical to ready except that it is set regardless of the terminating state of endpoints. This condition should be set to true for a ready endpoint that is terminating. If nil, consumers should defer to the ready condition.
	Serving *bool `pulumi:"serving"`
	// terminating indicates that this endpoint is terminating. A nil value indicates an unknown state. Consumers should interpret this unknown state to mean that the endpoint is not terminating.
	Terminating *bool `pulumi:"terminating"`
}

EndpointConditions represents the current condition of an endpoint.

type EndpointConditionsPatchArgs 

type EndpointConditionsPatchArgs struct {
	// ready indicates that this endpoint is prepared to receive traffic, according to whatever system is managing the endpoint. A nil value indicates an unknown state. In most cases consumers should interpret this unknown state as ready. For compatibility reasons, ready should never be "true" for terminating endpoints, except when the normal readiness behavior is being explicitly overridden, for example when the associated Service has set the publishNotReadyAddresses flag.
	Ready pulumi.BoolPtrInput `pulumi:"ready"`
	// serving is identical to ready except that it is set regardless of the terminating state of endpoints. This condition should be set to true for a ready endpoint that is terminating. If nil, consumers should defer to the ready condition.
	Serving pulumi.BoolPtrInput `pulumi:"serving"`
	// terminating indicates that this endpoint is terminating. A nil value indicates an unknown state. Consumers should interpret this unknown state to mean that the endpoint is not terminating.
	Terminating pulumi.BoolPtrInput `pulumi:"terminating"`
}

EndpointConditions represents the current condition of an endpoint.

func (EndpointConditionsPatchArgs) ElementType 

func (EndpointConditionsPatchArgs) ElementType() reflect.Type

func (EndpointConditionsPatchArgs) ToEndpointConditionsPatchOutput 

func (i EndpointConditionsPatchArgs) ToEndpointConditionsPatchOutput() EndpointConditionsPatchOutput

func (EndpointConditionsPatchArgs) ToEndpointConditionsPatchOutputWithContext 

func (i EndpointConditionsPatchArgs) ToEndpointConditionsPatchOutputWithContext(ctx context.Context) EndpointConditionsPatchOutput

func (EndpointConditionsPatchArgs) ToEndpointConditionsPatchPtrOutput 

func (i EndpointConditionsPatchArgs) ToEndpointConditionsPatchPtrOutput() EndpointConditionsPatchPtrOutput

func (EndpointConditionsPatchArgs) ToEndpointConditionsPatchPtrOutputWithContext 

func (i EndpointConditionsPatchArgs) ToEndpointConditionsPatchPtrOutputWithContext(ctx context.Context) EndpointConditionsPatchPtrOutput

type EndpointConditionsPatchInput 

type EndpointConditionsPatchInput interface {
	pulumi.Input

	ToEndpointConditionsPatchOutput() EndpointConditionsPatchOutput
	ToEndpointConditionsPatchOutputWithContext(context.Context) EndpointConditionsPatchOutput
}

EndpointConditionsPatchInput is an input type that accepts EndpointConditionsPatchArgs and EndpointConditionsPatchOutput values. You can construct a concrete instance of `EndpointConditionsPatchInput` via: 

EndpointConditionsPatchArgs{...}

type EndpointConditionsPatchOutput 

type EndpointConditionsPatchOutput struct{ *pulumi.OutputState }

EndpointConditions represents the current condition of an endpoint.

func (EndpointConditionsPatchOutput) ElementType 

func (EndpointConditionsPatchOutput) ElementType() reflect.Type

func (EndpointConditionsPatchOutput) Ready 

func (o EndpointConditionsPatchOutput) Ready() pulumi.BoolPtrOutput

ready indicates that this endpoint is prepared to receive traffic, according to whatever system is managing the endpoint. A nil value indicates an unknown state. In most cases consumers should interpret this unknown state as ready. For compatibility reasons, ready should never be "true" for terminating endpoints, except when the normal readiness behavior is being explicitly overridden, for example when the associated Service has set the publishNotReadyAddresses flag.

func (EndpointConditionsPatchOutput) Serving 

func (o EndpointConditionsPatchOutput) Serving() pulumi.BoolPtrOutput

serving is identical to ready except that it is set regardless of the terminating state of endpoints. This condition should be set to true for a ready endpoint that is terminating. If nil, consumers should defer to the ready condition.

func (EndpointConditionsPatchOutput) Terminating 

func (o EndpointConditionsPatchOutput) Terminating() pulumi.BoolPtrOutput

terminating indicates that this endpoint is terminating. A nil value indicates an unknown state. Consumers should interpret this unknown state to mean that the endpoint is not terminating.

func (EndpointConditionsPatchOutput) ToEndpointConditionsPatchOutput 

func (o EndpointConditionsPatchOutput) ToEndpointConditionsPatchOutput() EndpointConditionsPatchOutput

func (EndpointConditionsPatchOutput) ToEndpointConditionsPatchOutputWithContext 

func (o EndpointConditionsPatchOutput) ToEndpointConditionsPatchOutputWithContext(ctx context.Context) EndpointConditionsPatchOutput

func (EndpointConditionsPatchOutput) ToEndpointConditionsPatchPtrOutput 

func (o EndpointConditionsPatchOutput) ToEndpointConditionsPatchPtrOutput() EndpointConditionsPatchPtrOutput

func (EndpointConditionsPatchOutput) ToEndpointConditionsPatchPtrOutputWithContext 

func (o EndpointConditionsPatchOutput) ToEndpointConditionsPatchPtrOutputWithContext(ctx context.Context) EndpointConditionsPatchPtrOutput

type EndpointConditionsPatchPtrInput 

type EndpointConditionsPatchPtrInput interface {
	pulumi.Input

	ToEndpointConditionsPatchPtrOutput() EndpointConditionsPatchPtrOutput
	ToEndpointConditionsPatchPtrOutputWithContext(context.Context) EndpointConditionsPatchPtrOutput
}

EndpointConditionsPatchPtrInput is an input type that accepts EndpointConditionsPatchArgs, EndpointConditionsPatchPtr and EndpointConditionsPatchPtrOutput values. You can construct a concrete instance of `EndpointConditionsPatchPtrInput` via: 

        EndpointConditionsPatchArgs{...}

or:

        nil

func EndpointConditionsPatchPtr 

func EndpointConditionsPatchPtr(v *EndpointConditionsPatchArgs) EndpointConditionsPatchPtrInput

type EndpointConditionsPatchPtrOutput 

type EndpointConditionsPatchPtrOutput struct{ *pulumi.OutputState }

func (EndpointConditionsPatchPtrOutput) Elem 

func (o EndpointConditionsPatchPtrOutput) Elem() EndpointConditionsPatchOutput

func (EndpointConditionsPatchPtrOutput) ElementType 

func (EndpointConditionsPatchPtrOutput) ElementType() reflect.Type

func (EndpointConditionsPatchPtrOutput) Ready 

func (o EndpointConditionsPatchPtrOutput) Ready() pulumi.BoolPtrOutput

ready indicates that this endpoint is prepared to receive traffic, according to whatever system is managing the endpoint. A nil value indicates an unknown state. In most cases consumers should interpret this unknown state as ready. For compatibility reasons, ready should never be "true" for terminating endpoints, except when the normal readiness behavior is being explicitly overridden, for example when the associated Service has set the publishNotReadyAddresses flag.

func (EndpointConditionsPatchPtrOutput) Serving 

func (o EndpointConditionsPatchPtrOutput) Serving() pulumi.BoolPtrOutput

serving is identical to ready except that it is set regardless of the terminating state of endpoints. This condition should be set to true for a ready endpoint that is terminating. If nil, consumers should defer to the ready condition.

func (EndpointConditionsPatchPtrOutput) Terminating 

func (o EndpointConditionsPatchPtrOutput) Terminating() pulumi.BoolPtrOutput

terminating indicates that this endpoint is terminating. A nil value indicates an unknown state. Consumers should interpret this unknown state to mean that the endpoint is not terminating.

func (EndpointConditionsPatchPtrOutput) ToEndpointConditionsPatchPtrOutput 

func (o EndpointConditionsPatchPtrOutput) ToEndpointConditionsPatchPtrOutput() EndpointConditionsPatchPtrOutput

func (EndpointConditionsPatchPtrOutput) ToEndpointConditionsPatchPtrOutputWithContext 

func (o EndpointConditionsPatchPtrOutput) ToEndpointConditionsPatchPtrOutputWithContext(ctx context.Context) EndpointConditionsPatchPtrOutput

type EndpointConditionsPtrInput 

type EndpointConditionsPtrInput interface {
	pulumi.Input

	ToEndpointConditionsPtrOutput() EndpointConditionsPtrOutput
	ToEndpointConditionsPtrOutputWithContext(context.Context) EndpointConditionsPtrOutput
}

EndpointConditionsPtrInput is an input type that accepts EndpointConditionsArgs, EndpointConditionsPtr and EndpointConditionsPtrOutput values. You can construct a concrete instance of `EndpointConditionsPtrInput` via: 

        EndpointConditionsArgs{...}

or:

        nil

func EndpointConditionsPtr 

func EndpointConditionsPtr(v *EndpointConditionsArgs) EndpointConditionsPtrInput

type EndpointConditionsPtrOutput 

type EndpointConditionsPtrOutput struct{ *pulumi.OutputState }

func (EndpointConditionsPtrOutput) Elem 

func (o EndpointConditionsPtrOutput) Elem() EndpointConditionsOutput

func (EndpointConditionsPtrOutput) ElementType 

func (EndpointConditionsPtrOutput) ElementType() reflect.Type

func (EndpointConditionsPtrOutput) Ready 

func (o EndpointConditionsPtrOutput) Ready() pulumi.BoolPtrOutput

ready indicates that this endpoint is prepared to receive traffic, according to whatever system is managing the endpoint. A nil value indicates an unknown state. In most cases consumers should interpret this unknown state as ready. For compatibility reasons, ready should never be "true" for terminating endpoints, except when the normal readiness behavior is being explicitly overridden, for example when the associated Service has set the publishNotReadyAddresses flag.

func (EndpointConditionsPtrOutput) Serving 

func (o EndpointConditionsPtrOutput) Serving() pulumi.BoolPtrOutput

serving is identical to ready except that it is set regardless of the terminating state of endpoints. This condition should be set to true for a ready endpoint that is terminating. If nil, consumers should defer to the ready condition.

func (EndpointConditionsPtrOutput) Terminating 

func (o EndpointConditionsPtrOutput) Terminating() pulumi.BoolPtrOutput

terminating indicates that this endpoint is terminating. A nil value indicates an unknown state. Consumers should interpret this unknown state to mean that the endpoint is not terminating.

func (EndpointConditionsPtrOutput) ToEndpointConditionsPtrOutput 

func (o EndpointConditionsPtrOutput) ToEndpointConditionsPtrOutput() EndpointConditionsPtrOutput

func (EndpointConditionsPtrOutput) ToEndpointConditionsPtrOutputWithContext 

func (o EndpointConditionsPtrOutput) ToEndpointConditionsPtrOutputWithContext(ctx context.Context) EndpointConditionsPtrOutput

type EndpointHints 

type EndpointHints struct {
	// forZones indicates the zone(s) this endpoint should be consumed by to enable topology aware routing.
	ForZones []ForZone `pulumi:"forZones"`
}

EndpointHints provides hints describing how an endpoint should be consumed.

type EndpointHintsArgs 

type EndpointHintsArgs struct {
	// forZones indicates the zone(s) this endpoint should be consumed by to enable topology aware routing.
	ForZones ForZoneArrayInput `pulumi:"forZones"`
}

EndpointHints provides hints describing how an endpoint should be consumed.

func (EndpointHintsArgs) ElementType 

func (EndpointHintsArgs) ElementType() reflect.Type

func (EndpointHintsArgs) ToEndpointHintsOutput 

func (i EndpointHintsArgs) ToEndpointHintsOutput() EndpointHintsOutput

func (EndpointHintsArgs) ToEndpointHintsOutputWithContext 

func (i EndpointHintsArgs) ToEndpointHintsOutputWithContext(ctx context.Context) EndpointHintsOutput

func (EndpointHintsArgs) ToEndpointHintsPtrOutput 

func (i EndpointHintsArgs) ToEndpointHintsPtrOutput() EndpointHintsPtrOutput

func (EndpointHintsArgs) ToEndpointHintsPtrOutputWithContext 

func (i EndpointHintsArgs) ToEndpointHintsPtrOutputWithContext(ctx context.Context) EndpointHintsPtrOutput

type EndpointHintsInput 

type EndpointHintsInput interface {
	pulumi.Input

	ToEndpointHintsOutput() EndpointHintsOutput
	ToEndpointHintsOutputWithContext(context.Context) EndpointHintsOutput
}

EndpointHintsInput is an input type that accepts EndpointHintsArgs and EndpointHintsOutput values. You can construct a concrete instance of `EndpointHintsInput` via: 

EndpointHintsArgs{...}

type EndpointHintsOutput 

type EndpointHintsOutput struct{ *pulumi.OutputState }

EndpointHints provides hints describing how an endpoint should be consumed.

func (EndpointHintsOutput) ElementType 

func (EndpointHintsOutput) ElementType() reflect.Type

func (EndpointHintsOutput) ForZones 

func (o EndpointHintsOutput) ForZones() ForZoneArrayOutput

forZones indicates the zone(s) this endpoint should be consumed by to enable topology aware routing.

func (EndpointHintsOutput) ToEndpointHintsOutput 

func (o EndpointHintsOutput) ToEndpointHintsOutput() EndpointHintsOutput

func (EndpointHintsOutput) ToEndpointHintsOutputWithContext 

func (o EndpointHintsOutput) ToEndpointHintsOutputWithContext(ctx context.Context) EndpointHintsOutput

func (EndpointHintsOutput) ToEndpointHintsPtrOutput 

func (o EndpointHintsOutput) ToEndpointHintsPtrOutput() EndpointHintsPtrOutput

func (EndpointHintsOutput) ToEndpointHintsPtrOutputWithContext 

func (o EndpointHintsOutput) ToEndpointHintsPtrOutputWithContext(ctx context.Context) EndpointHintsPtrOutput

type EndpointHintsPatch 

type EndpointHintsPatch struct {
	// forZones indicates the zone(s) this endpoint should be consumed by to enable topology aware routing.
	ForZones []ForZonePatch `pulumi:"forZones"`
}

EndpointHints provides hints describing how an endpoint should be consumed.

type EndpointHintsPatchArgs 

type EndpointHintsPatchArgs struct {
	// forZones indicates the zone(s) this endpoint should be consumed by to enable topology aware routing.
	ForZones ForZonePatchArrayInput `pulumi:"forZones"`
}

EndpointHints provides hints describing how an endpoint should be consumed.

func (EndpointHintsPatchArgs) ElementType 

func (EndpointHintsPatchArgs) ElementType() reflect.Type

func (EndpointHintsPatchArgs) ToEndpointHintsPatchOutput 

func (i EndpointHintsPatchArgs) ToEndpointHintsPatchOutput() EndpointHintsPatchOutput

func (EndpointHintsPatchArgs) ToEndpointHintsPatchOutputWithContext 

func (i EndpointHintsPatchArgs) ToEndpointHintsPatchOutputWithContext(ctx context.Context) EndpointHintsPatchOutput

func (EndpointHintsPatchArgs) ToEndpointHintsPatchPtrOutput 

func (i EndpointHintsPatchArgs) ToEndpointHintsPatchPtrOutput() EndpointHintsPatchPtrOutput

func (EndpointHintsPatchArgs) ToEndpointHintsPatchPtrOutputWithContext 

func (i EndpointHintsPatchArgs) ToEndpointHintsPatchPtrOutputWithContext(ctx context.Context) EndpointHintsPatchPtrOutput

type EndpointHintsPatchInput 

type EndpointHintsPatchInput interface {
	pulumi.Input

	ToEndpointHintsPatchOutput() EndpointHintsPatchOutput
	ToEndpointHintsPatchOutputWithContext(context.Context) EndpointHintsPatchOutput
}

EndpointHintsPatchInput is an input type that accepts EndpointHintsPatchArgs and EndpointHintsPatchOutput values. You can construct a concrete instance of `EndpointHintsPatchInput` via: 

EndpointHintsPatchArgs{...}

type EndpointHintsPatchOutput 

type EndpointHintsPatchOutput struct{ *pulumi.OutputState }

EndpointHints provides hints describing how an endpoint should be consumed.

func (EndpointHintsPatchOutput) ElementType 

func (EndpointHintsPatchOutput) ElementType() reflect.Type

func (EndpointHintsPatchOutput) ForZones 

func (o EndpointHintsPatchOutput) ForZones() ForZonePatchArrayOutput

forZones indicates the zone(s) this endpoint should be consumed by to enable topology aware routing.

func (EndpointHintsPatchOutput) ToEndpointHintsPatchOutput 

func (o EndpointHintsPatchOutput) ToEndpointHintsPatchOutput() EndpointHintsPatchOutput

func (EndpointHintsPatchOutput) ToEndpointHintsPatchOutputWithContext 

func (o EndpointHintsPatchOutput) ToEndpointHintsPatchOutputWithContext(ctx context.Context) EndpointHintsPatchOutput

func (EndpointHintsPatchOutput) ToEndpointHintsPatchPtrOutput 

func (o EndpointHintsPatchOutput) ToEndpointHintsPatchPtrOutput() EndpointHintsPatchPtrOutput

func (EndpointHintsPatchOutput) ToEndpointHintsPatchPtrOutputWithContext 

func (o EndpointHintsPatchOutput) ToEndpointHintsPatchPtrOutputWithContext(ctx context.Context) EndpointHintsPatchPtrOutput

type EndpointHintsPatchPtrInput 

type EndpointHintsPatchPtrInput interface {
	pulumi.Input

	ToEndpointHintsPatchPtrOutput() EndpointHintsPatchPtrOutput
	ToEndpointHintsPatchPtrOutputWithContext(context.Context) EndpointHintsPatchPtrOutput
}

EndpointHintsPatchPtrInput is an input type that accepts EndpointHintsPatchArgs, EndpointHintsPatchPtr and EndpointHintsPatchPtrOutput values. You can construct a concrete instance of `EndpointHintsPatchPtrInput` via: 

        EndpointHintsPatchArgs{...}

or:

        nil

func EndpointHintsPatchPtr 

func EndpointHintsPatchPtr(v *EndpointHintsPatchArgs) EndpointHintsPatchPtrInput

type EndpointHintsPatchPtrOutput 

type EndpointHintsPatchPtrOutput struct{ *pulumi.OutputState }

func (EndpointHintsPatchPtrOutput) Elem 

func (o EndpointHintsPatchPtrOutput) Elem() EndpointHintsPatchOutput

func (EndpointHintsPatchPtrOutput) ElementType 

func (EndpointHintsPatchPtrOutput) ElementType() reflect.Type

func (EndpointHintsPatchPtrOutput) ForZones 

func (o EndpointHintsPatchPtrOutput) ForZones() ForZonePatchArrayOutput

forZones indicates the zone(s) this endpoint should be consumed by to enable topology aware routing.

func (EndpointHintsPatchPtrOutput) ToEndpointHintsPatchPtrOutput 

func (o EndpointHintsPatchPtrOutput) ToEndpointHintsPatchPtrOutput() EndpointHintsPatchPtrOutput

func (EndpointHintsPatchPtrOutput) ToEndpointHintsPatchPtrOutputWithContext 

func (o EndpointHintsPatchPtrOutput) ToEndpointHintsPatchPtrOutputWithContext(ctx context.Context) EndpointHintsPatchPtrOutput

type EndpointHintsPtrInput 

type EndpointHintsPtrInput interface {
	pulumi.Input

	ToEndpointHintsPtrOutput() EndpointHintsPtrOutput
	ToEndpointHintsPtrOutputWithContext(context.Context) EndpointHintsPtrOutput
}

EndpointHintsPtrInput is an input type that accepts EndpointHintsArgs, EndpointHintsPtr and EndpointHintsPtrOutput values. You can construct a concrete instance of `EndpointHintsPtrInput` via: 

        EndpointHintsArgs{...}

or:

        nil

func EndpointHintsPtr 

func EndpointHintsPtr(v *EndpointHintsArgs) EndpointHintsPtrInput

type EndpointHintsPtrOutput 

type EndpointHintsPtrOutput struct{ *pulumi.OutputState }

func (EndpointHintsPtrOutput) Elem 

func (o EndpointHintsPtrOutput) Elem() EndpointHintsOutput

func (EndpointHintsPtrOutput) ElementType 

func (EndpointHintsPtrOutput) ElementType() reflect.Type

func (EndpointHintsPtrOutput) ForZones 

func (o EndpointHintsPtrOutput) ForZones() ForZoneArrayOutput

forZones indicates the zone(s) this endpoint should be consumed by to enable topology aware routing.

func (EndpointHintsPtrOutput) ToEndpointHintsPtrOutput 

func (o EndpointHintsPtrOutput) ToEndpointHintsPtrOutput() EndpointHintsPtrOutput

func (EndpointHintsPtrOutput) ToEndpointHintsPtrOutputWithContext 

func (o EndpointHintsPtrOutput) ToEndpointHintsPtrOutputWithContext(ctx context.Context) EndpointHintsPtrOutput

type EndpointInput 

type EndpointInput interface {
	pulumi.Input

	ToEndpointOutput() EndpointOutput
	ToEndpointOutputWithContext(context.Context) EndpointOutput
}

EndpointInput is an input type that accepts EndpointArgs and EndpointOutput values. You can construct a concrete instance of `EndpointInput` via: 

EndpointArgs{...}

type EndpointOutput 

type EndpointOutput struct{ *pulumi.OutputState }

Endpoint represents a single logical "backend" implementing a service.

func (EndpointOutput) Addresses 

func (o EndpointOutput) Addresses() pulumi.StringArrayOutput

addresses of this endpoint. The contents of this field are interpreted according to the corresponding EndpointSlice addressType field. Consumers must handle different types of addresses in the context of their own capabilities. This must contain at least one address but no more than 100. These are all assumed to be fungible and clients may choose to only use the first element. Refer to: https://issue.k8s.io/106267

func (EndpointOutput) Conditions 

func (o EndpointOutput) Conditions() EndpointConditionsPtrOutput

conditions contains information about the current status of the endpoint.

func (EndpointOutput) DeprecatedTopology 

func (o EndpointOutput) DeprecatedTopology() pulumi.StringMapOutput

deprecatedTopology contains topology information part of the v1beta1 API. This field is deprecated, and will be removed when the v1beta1 API is removed (no sooner than kubernetes v1.24). While this field can hold values, it is not writable through the v1 API, and any attempts to write to it will be silently ignored. Topology information can be found in the zone and nodeName fields instead.

func (EndpointOutput) ElementType 

func (EndpointOutput) ElementType() reflect.Type

func (EndpointOutput) Hints 

func (o EndpointOutput) Hints() EndpointHintsPtrOutput

hints contains information associated with how an endpoint should be consumed.

func (EndpointOutput) Hostname 

func (o EndpointOutput) Hostname() pulumi.StringPtrOutput

hostname of this endpoint. This field may be used by consumers of endpoints to distinguish endpoints from each other (e.g. in DNS names). Multiple endpoints which use the same hostname should be considered fungible (e.g. multiple A values in DNS). Must be lowercase and pass DNS Label (RFC 1123) validation.

func (EndpointOutput) NodeName 

func (o EndpointOutput) NodeName() pulumi.StringPtrOutput

nodeName represents the name of the Node hosting this endpoint. This can be used to determine endpoints local to a Node.

func (EndpointOutput) TargetRef 

func (o EndpointOutput) TargetRef() corev1.ObjectReferencePtrOutput

targetRef is a reference to a Kubernetes object that represents this endpoint.

func (EndpointOutput) ToEndpointOutput 

func (o EndpointOutput) ToEndpointOutput() EndpointOutput

func (EndpointOutput) ToEndpointOutputWithContext 

func (o EndpointOutput) ToEndpointOutputWithContext(ctx context.Context) EndpointOutput

func (EndpointOutput) Zone 

func (o EndpointOutput) Zone() pulumi.StringPtrOutput

zone is the name of the Zone this endpoint exists in.

type EndpointPatch 

type EndpointPatch struct {
	// addresses of this endpoint. The contents of this field are interpreted according to the corresponding EndpointSlice addressType field. Consumers must handle different types of addresses in the context of their own capabilities. This must contain at least one address but no more than 100. These are all assumed to be fungible and clients may choose to only use the first element. Refer to: https://issue.k8s.io/106267
	Addresses []string `pulumi:"addresses"`
	// conditions contains information about the current status of the endpoint.
	Conditions *EndpointConditionsPatch `pulumi:"conditions"`
	// deprecatedTopology contains topology information part of the v1beta1 API. This field is deprecated, and will be removed when the v1beta1 API is removed (no sooner than kubernetes v1.24).  While this field can hold values, it is not writable through the v1 API, and any attempts to write to it will be silently ignored. Topology information can be found in the zone and nodeName fields instead.
	DeprecatedTopology map[string]string `pulumi:"deprecatedTopology"`
	// hints contains information associated with how an endpoint should be consumed.
	Hints *EndpointHintsPatch `pulumi:"hints"`
	// hostname of this endpoint. This field may be used by consumers of endpoints to distinguish endpoints from each other (e.g. in DNS names). Multiple endpoints which use the same hostname should be considered fungible (e.g. multiple A values in DNS). Must be lowercase and pass DNS Label (RFC 1123) validation.
	Hostname *string `pulumi:"hostname"`
	// nodeName represents the name of the Node hosting this endpoint. This can be used to determine endpoints local to a Node.
	NodeName *string `pulumi:"nodeName"`
	// targetRef is a reference to a Kubernetes object that represents this endpoint.
	TargetRef *corev1.ObjectReferencePatch `pulumi:"targetRef"`
	// zone is the name of the Zone this endpoint exists in.
	Zone *string `pulumi:"zone"`
}

Endpoint represents a single logical "backend" implementing a service.

type EndpointPatchArgs 

type EndpointPatchArgs struct {
	// addresses of this endpoint. The contents of this field are interpreted according to the corresponding EndpointSlice addressType field. Consumers must handle different types of addresses in the context of their own capabilities. This must contain at least one address but no more than 100. These are all assumed to be fungible and clients may choose to only use the first element. Refer to: https://issue.k8s.io/106267
	Addresses pulumi.StringArrayInput `pulumi:"addresses"`
	// conditions contains information about the current status of the endpoint.
	Conditions EndpointConditionsPatchPtrInput `pulumi:"conditions"`
	// deprecatedTopology contains topology information part of the v1beta1 API. This field is deprecated, and will be removed when the v1beta1 API is removed (no sooner than kubernetes v1.24).  While this field can hold values, it is not writable through the v1 API, and any attempts to write to it will be silently ignored. Topology information can be found in the zone and nodeName fields instead.
	DeprecatedTopology pulumi.StringMapInput `pulumi:"deprecatedTopology"`
	// hints contains information associated with how an endpoint should be consumed.
	Hints EndpointHintsPatchPtrInput `pulumi:"hints"`
	// hostname of this endpoint. This field may be used by consumers of endpoints to distinguish endpoints from each other (e.g. in DNS names). Multiple endpoints which use the same hostname should be considered fungible (e.g. multiple A values in DNS). Must be lowercase and pass DNS Label (RFC 1123) validation.
	Hostname pulumi.StringPtrInput `pulumi:"hostname"`
	// nodeName represents the name of the Node hosting this endpoint. This can be used to determine endpoints local to a Node.
	NodeName pulumi.StringPtrInput `pulumi:"nodeName"`
	// targetRef is a reference to a Kubernetes object that represents this endpoint.
	TargetRef corev1.ObjectReferencePatchPtrInput `pulumi:"targetRef"`
	// zone is the name of the Zone this endpoint exists in.
	Zone pulumi.StringPtrInput `pulumi:"zone"`
}

Endpoint represents a single logical "backend" implementing a service.

func (EndpointPatchArgs) ElementType 

func (EndpointPatchArgs) ElementType() reflect.Type

func (EndpointPatchArgs) ToEndpointPatchOutput 

func (i EndpointPatchArgs) ToEndpointPatchOutput() EndpointPatchOutput

func (EndpointPatchArgs) ToEndpointPatchOutputWithContext 

func (i EndpointPatchArgs) ToEndpointPatchOutputWithContext(ctx context.Context) EndpointPatchOutput

type EndpointPatchArray 

type EndpointPatchArray []EndpointPatchInput

func (EndpointPatchArray) ElementType 

func (EndpointPatchArray) ElementType() reflect.Type

func (EndpointPatchArray) ToEndpointPatchArrayOutput 

func (i EndpointPatchArray) ToEndpointPatchArrayOutput() EndpointPatchArrayOutput

func (EndpointPatchArray) ToEndpointPatchArrayOutputWithContext 

func (i EndpointPatchArray) ToEndpointPatchArrayOutputWithContext(ctx context.Context) EndpointPatchArrayOutput

type EndpointPatchArrayInput 

type EndpointPatchArrayInput interface {
	pulumi.Input

	ToEndpointPatchArrayOutput() EndpointPatchArrayOutput
	ToEndpointPatchArrayOutputWithContext(context.Context) EndpointPatchArrayOutput
}

EndpointPatchArrayInput is an input type that accepts EndpointPatchArray and EndpointPatchArrayOutput values. You can construct a concrete instance of `EndpointPatchArrayInput` via: 

EndpointPatchArray{ EndpointPatchArgs{...} }

type EndpointPatchArrayOutput 

type EndpointPatchArrayOutput struct{ *pulumi.OutputState }

func (EndpointPatchArrayOutput) ElementType 

func (EndpointPatchArrayOutput) ElementType() reflect.Type

func (EndpointPatchArrayOutput) Index 

func (o EndpointPatchArrayOutput) Index(i pulumi.IntInput) EndpointPatchOutput

func (EndpointPatchArrayOutput) ToEndpointPatchArrayOutput 

func (o EndpointPatchArrayOutput) ToEndpointPatchArrayOutput() EndpointPatchArrayOutput

func (EndpointPatchArrayOutput) ToEndpointPatchArrayOutputWithContext 

func (o EndpointPatchArrayOutput) ToEndpointPatchArrayOutputWithContext(ctx context.Context) EndpointPatchArrayOutput

type EndpointPatchInput 

type EndpointPatchInput interface {
	pulumi.Input

	ToEndpointPatchOutput() EndpointPatchOutput
	ToEndpointPatchOutputWithContext(context.Context) EndpointPatchOutput
}

EndpointPatchInput is an input type that accepts EndpointPatchArgs and EndpointPatchOutput values. You can construct a concrete instance of `EndpointPatchInput` via: 

EndpointPatchArgs{...}

type EndpointPatchOutput 

type EndpointPatchOutput struct{ *pulumi.OutputState }

Endpoint represents a single logical "backend" implementing a service.

func (EndpointPatchOutput) Addresses 

func (o EndpointPatchOutput) Addresses() pulumi.StringArrayOutput

addresses of this endpoint. The contents of this field are interpreted according to the corresponding EndpointSlice addressType field. Consumers must handle different types of addresses in the context of their own capabilities. This must contain at least one address but no more than 100. These are all assumed to be fungible and clients may choose to only use the first element. Refer to: https://issue.k8s.io/106267

func (EndpointPatchOutput) Conditions 

func (o EndpointPatchOutput) Conditions() EndpointConditionsPatchPtrOutput

conditions contains information about the current status of the endpoint.

func (EndpointPatchOutput) DeprecatedTopology 

func (o EndpointPatchOutput) DeprecatedTopology() pulumi.StringMapOutput

deprecatedTopology contains topology information part of the v1beta1 API. This field is deprecated, and will be removed when the v1beta1 API is removed (no sooner than kubernetes v1.24). While this field can hold values, it is not writable through the v1 API, and any attempts to write to it will be silently ignored. Topology information can be found in the zone and nodeName fields instead.

func (EndpointPatchOutput) ElementType 

func (EndpointPatchOutput) ElementType() reflect.Type

func (EndpointPatchOutput) Hints 

func (o EndpointPatchOutput) Hints() EndpointHintsPatchPtrOutput

hints contains information associated with how an endpoint should be consumed.

func (EndpointPatchOutput) Hostname 

func (o EndpointPatchOutput) Hostname() pulumi.StringPtrOutput

hostname of this endpoint. This field may be used by consumers of endpoints to distinguish endpoints from each other (e.g. in DNS names). Multiple endpoints which use the same hostname should be considered fungible (e.g. multiple A values in DNS). Must be lowercase and pass DNS Label (RFC 1123) validation.

func (EndpointPatchOutput) NodeName 

func (o EndpointPatchOutput) NodeName() pulumi.StringPtrOutput

nodeName represents the name of the Node hosting this endpoint. This can be used to determine endpoints local to a Node.

func (EndpointPatchOutput) TargetRef 

func (o EndpointPatchOutput) TargetRef() corev1.ObjectReferencePatchPtrOutput

targetRef is a reference to a Kubernetes object that represents this endpoint.

func (EndpointPatchOutput) ToEndpointPatchOutput 

func (o EndpointPatchOutput) ToEndpointPatchOutput() EndpointPatchOutput

func (EndpointPatchOutput) ToEndpointPatchOutputWithContext 

func (o EndpointPatchOutput) ToEndpointPatchOutputWithContext(ctx context.Context) EndpointPatchOutput

func (EndpointPatchOutput) Zone 

func (o EndpointPatchOutput) Zone() pulumi.StringPtrOutput

zone is the name of the Zone this endpoint exists in.

type EndpointPort 

type EndpointPort struct {
	// The application protocol for this port. This is used as a hint for implementations to offer richer behavior for protocols that they understand. This field follows standard Kubernetes label syntax. Valid values are either:
	//
	// * Un-prefixed protocol names - reserved for IANA standard service names (as per RFC-6335 and https://www.iana.org/assignments/service-names).
	//
	// * Kubernetes-defined prefixed names:
	//   * 'kubernetes.io/h2c' - HTTP/2 prior knowledge over cleartext as described in https://www.rfc-editor.org/rfc/rfc9113.html#name-starting-http-2-with-prior-
	//   * 'kubernetes.io/ws'  - WebSocket over cleartext as described in https://www.rfc-editor.org/rfc/rfc6455
	//   * 'kubernetes.io/wss' - WebSocket over TLS as described in https://www.rfc-editor.org/rfc/rfc6455
	//
	// * Other protocols should use implementation-defined prefixed names such as mycompany.com/my-custom-protocol.
	AppProtocol *string `pulumi:"appProtocol"`
	// name represents the name of this port. All ports in an EndpointSlice must have a unique name. If the EndpointSlice is derived from a Kubernetes service, this corresponds to the Service.ports[].name. Name must either be an empty string or pass DNS_LABEL validation: * must be no more than 63 characters long. * must consist of lower case alphanumeric characters or '-'. * must start and end with an alphanumeric character. Default is empty string.
	Name *string `pulumi:"name"`
	// port represents the port number of the endpoint. If this is not specified, ports are not restricted and must be interpreted in the context of the specific consumer.
	Port *int `pulumi:"port"`
	// protocol represents the IP protocol for this port. Must be UDP, TCP, or SCTP. Default is TCP.
	Protocol *string `pulumi:"protocol"`
}

EndpointPort represents a Port used by an EndpointSlice

type EndpointPortArgs 

type EndpointPortArgs struct {
	// The application protocol for this port. This is used as a hint for implementations to offer richer behavior for protocols that they understand. This field follows standard Kubernetes label syntax. Valid values are either:
	//
	// * Un-prefixed protocol names - reserved for IANA standard service names (as per RFC-6335 and https://www.iana.org/assignments/service-names).
	//
	// * Kubernetes-defined prefixed names:
	//   * 'kubernetes.io/h2c' - HTTP/2 prior knowledge over cleartext as described in https://www.rfc-editor.org/rfc/rfc9113.html#name-starting-http-2-with-prior-
	//   * 'kubernetes.io/ws'  - WebSocket over cleartext as described in https://www.rfc-editor.org/rfc/rfc6455
	//   * 'kubernetes.io/wss' - WebSocket over TLS as described in https://www.rfc-editor.org/rfc/rfc6455
	//
	// * Other protocols should use implementation-defined prefixed names such as mycompany.com/my-custom-protocol.
	AppProtocol pulumi.StringPtrInput `pulumi:"appProtocol"`
	// name represents the name of this port. All ports in an EndpointSlice must have a unique name. If the EndpointSlice is derived from a Kubernetes service, this corresponds to the Service.ports[].name. Name must either be an empty string or pass DNS_LABEL validation: * must be no more than 63 characters long. * must consist of lower case alphanumeric characters or '-'. * must start and end with an alphanumeric character. Default is empty string.
	Name pulumi.StringPtrInput `pulumi:"name"`
	// port represents the port number of the endpoint. If this is not specified, ports are not restricted and must be interpreted in the context of the specific consumer.
	Port pulumi.IntPtrInput `pulumi:"port"`
	// protocol represents the IP protocol for this port. Must be UDP, TCP, or SCTP. Default is TCP.
	Protocol pulumi.StringPtrInput `pulumi:"protocol"`
}

EndpointPort represents a Port used by an EndpointSlice

func (EndpointPortArgs) ElementType 

func (EndpointPortArgs) ElementType() reflect.Type

func (EndpointPortArgs) ToEndpointPortOutput 

func (i EndpointPortArgs) ToEndpointPortOutput() EndpointPortOutput

func (EndpointPortArgs) ToEndpointPortOutputWithContext 

func (i EndpointPortArgs) ToEndpointPortOutputWithContext(ctx context.Context) EndpointPortOutput

type EndpointPortArray 

type EndpointPortArray []EndpointPortInput

func (EndpointPortArray) ElementType 

func (EndpointPortArray) ElementType() reflect.Type

func (EndpointPortArray) ToEndpointPortArrayOutput 

func (i EndpointPortArray) ToEndpointPortArrayOutput() EndpointPortArrayOutput

func (EndpointPortArray) ToEndpointPortArrayOutputWithContext 

func (i EndpointPortArray) ToEndpointPortArrayOutputWithContext(ctx context.Context) EndpointPortArrayOutput

type EndpointPortArrayInput 

type EndpointPortArrayInput interface {
	pulumi.Input

	ToEndpointPortArrayOutput() EndpointPortArrayOutput
	ToEndpointPortArrayOutputWithContext(context.Context) EndpointPortArrayOutput
}

EndpointPortArrayInput is an input type that accepts EndpointPortArray and EndpointPortArrayOutput values. You can construct a concrete instance of `EndpointPortArrayInput` via: 

EndpointPortArray{ EndpointPortArgs{...} }

type EndpointPortArrayOutput 

type EndpointPortArrayOutput struct{ *pulumi.OutputState }

func (EndpointPortArrayOutput) ElementType 

func (EndpointPortArrayOutput) ElementType() reflect.Type

func (EndpointPortArrayOutput) Index 

func (o EndpointPortArrayOutput) Index(i pulumi.IntInput) EndpointPortOutput

func (EndpointPortArrayOutput) ToEndpointPortArrayOutput 

func (o EndpointPortArrayOutput) ToEndpointPortArrayOutput() EndpointPortArrayOutput

func (EndpointPortArrayOutput) ToEndpointPortArrayOutputWithContext 

func (o EndpointPortArrayOutput) ToEndpointPortArrayOutputWithContext(ctx context.Context) EndpointPortArrayOutput

type EndpointPortInput 

type EndpointPortInput interface {
	pulumi.Input

	ToEndpointPortOutput() EndpointPortOutput
	ToEndpointPortOutputWithContext(context.Context) EndpointPortOutput
}

EndpointPortInput is an input type that accepts EndpointPortArgs and EndpointPortOutput values. You can construct a concrete instance of `EndpointPortInput` via: 

EndpointPortArgs{...}

type EndpointPortOutput 

type EndpointPortOutput struct{ *pulumi.OutputState }

EndpointPort represents a Port used by an EndpointSlice

func (EndpointPortOutput) AppProtocol 

func (o EndpointPortOutput) AppProtocol() pulumi.StringPtrOutput

The application protocol for this port. This is used as a hint for implementations to offer richer behavior for protocols that they understand. This field follows standard Kubernetes label syntax. Valid values are either:

* Un-prefixed protocol names - reserved for IANA standard service names (as per RFC-6335 and https://www.iana.org/assignments/service-names).

* Kubernetes-defined prefixed names:

* Other protocols should use implementation-defined prefixed names such as mycompany.com/my-custom-protocol.

func (EndpointPortOutput) ElementType 

func (EndpointPortOutput) ElementType() reflect.Type

func (EndpointPortOutput) Name 

func (o EndpointPortOutput) Name() pulumi.StringPtrOutput

name represents the name of this port. All ports in an EndpointSlice must have a unique name. If the EndpointSlice is derived from a Kubernetes service, this corresponds to the Service.ports[].name. Name must either be an empty string or pass DNS_LABEL validation: * must be no more than 63 characters long. * must consist of lower case alphanumeric characters or '-'. * must start and end with an alphanumeric character. Default is empty string.

func (EndpointPortOutput) Port 

func (o EndpointPortOutput) Port() pulumi.IntPtrOutput

port represents the port number of the endpoint. If this is not specified, ports are not restricted and must be interpreted in the context of the specific consumer.

func (EndpointPortOutput) Protocol 

func (o EndpointPortOutput) Protocol() pulumi.StringPtrOutput

protocol represents the IP protocol for this port. Must be UDP, TCP, or SCTP. Default is TCP.

func (EndpointPortOutput) ToEndpointPortOutput 

func (o EndpointPortOutput) ToEndpointPortOutput() EndpointPortOutput

func (EndpointPortOutput) ToEndpointPortOutputWithContext 

func (o EndpointPortOutput) ToEndpointPortOutputWithContext(ctx context.Context) EndpointPortOutput

type EndpointPortPatch 

type EndpointPortPatch struct {
	// The application protocol for this port. This is used as a hint for implementations to offer richer behavior for protocols that they understand. This field follows standard Kubernetes label syntax. Valid values are either:
	//
	// * Un-prefixed protocol names - reserved for IANA standard service names (as per RFC-6335 and https://www.iana.org/assignments/service-names).
	//
	// * Kubernetes-defined prefixed names:
	//   * 'kubernetes.io/h2c' - HTTP/2 prior knowledge over cleartext as described in https://www.rfc-editor.org/rfc/rfc9113.html#name-starting-http-2-with-prior-
	//   * 'kubernetes.io/ws'  - WebSocket over cleartext as described in https://www.rfc-editor.org/rfc/rfc6455
	//   * 'kubernetes.io/wss' - WebSocket over TLS as described in https://www.rfc-editor.org/rfc/rfc6455
	//
	// * Other protocols should use implementation-defined prefixed names such as mycompany.com/my-custom-protocol.
	AppProtocol *string `pulumi:"appProtocol"`
	// name represents the name of this port. All ports in an EndpointSlice must have a unique name. If the EndpointSlice is derived from a Kubernetes service, this corresponds to the Service.ports[].name. Name must either be an empty string or pass DNS_LABEL validation: * must be no more than 63 characters long. * must consist of lower case alphanumeric characters or '-'. * must start and end with an alphanumeric character. Default is empty string.
	Name *string `pulumi:"name"`
	// port represents the port number of the endpoint. If this is not specified, ports are not restricted and must be interpreted in the context of the specific consumer.
	Port *int `pulumi:"port"`
	// protocol represents the IP protocol for this port. Must be UDP, TCP, or SCTP. Default is TCP.
	Protocol *string `pulumi:"protocol"`
}

EndpointPort represents a Port used by an EndpointSlice

type EndpointPortPatchArgs 

type EndpointPortPatchArgs struct {
	// The application protocol for this port. This is used as a hint for implementations to offer richer behavior for protocols that they understand. This field follows standard Kubernetes label syntax. Valid values are either:
	//
	// * Un-prefixed protocol names - reserved for IANA standard service names (as per RFC-6335 and https://www.iana.org/assignments/service-names).
	//
	// * Kubernetes-defined prefixed names:
	//   * 'kubernetes.io/h2c' - HTTP/2 prior knowledge over cleartext as described in https://www.rfc-editor.org/rfc/rfc9113.html#name-starting-http-2-with-prior-
	//   * 'kubernetes.io/ws'  - WebSocket over cleartext as described in https://www.rfc-editor.org/rfc/rfc6455
	//   * 'kubernetes.io/wss' - WebSocket over TLS as described in https://www.rfc-editor.org/rfc/rfc6455
	//
	// * Other protocols should use implementation-defined prefixed names such as mycompany.com/my-custom-protocol.
	AppProtocol pulumi.StringPtrInput `pulumi:"appProtocol"`
	// name represents the name of this port. All ports in an EndpointSlice must have a unique name. If the EndpointSlice is derived from a Kubernetes service, this corresponds to the Service.ports[].name. Name must either be an empty string or pass DNS_LABEL validation: * must be no more than 63 characters long. * must consist of lower case alphanumeric characters or '-'. * must start and end with an alphanumeric character. Default is empty string.
	Name pulumi.StringPtrInput `pulumi:"name"`
	// port represents the port number of the endpoint. If this is not specified, ports are not restricted and must be interpreted in the context of the specific consumer.
	Port pulumi.IntPtrInput `pulumi:"port"`
	// protocol represents the IP protocol for this port. Must be UDP, TCP, or SCTP. Default is TCP.
	Protocol pulumi.StringPtrInput `pulumi:"protocol"`
}

EndpointPort represents a Port used by an EndpointSlice

func (EndpointPortPatchArgs) ElementType 

func (EndpointPortPatchArgs) ElementType() reflect.Type

func (EndpointPortPatchArgs) ToEndpointPortPatchOutput 

func (i EndpointPortPatchArgs) ToEndpointPortPatchOutput() EndpointPortPatchOutput

func (EndpointPortPatchArgs) ToEndpointPortPatchOutputWithContext 

func (i EndpointPortPatchArgs) ToEndpointPortPatchOutputWithContext(ctx context.Context) EndpointPortPatchOutput

type EndpointPortPatchArray 

type EndpointPortPatchArray []EndpointPortPatchInput

func (EndpointPortPatchArray) ElementType 

func (EndpointPortPatchArray) ElementType() reflect.Type

func (EndpointPortPatchArray) ToEndpointPortPatchArrayOutput 

func (i EndpointPortPatchArray) ToEndpointPortPatchArrayOutput() EndpointPortPatchArrayOutput

func (EndpointPortPatchArray) ToEndpointPortPatchArrayOutputWithContext 

func (i EndpointPortPatchArray) ToEndpointPortPatchArrayOutputWithContext(ctx context.Context) EndpointPortPatchArrayOutput

type EndpointPortPatchArrayInput 

type EndpointPortPatchArrayInput interface {
	pulumi.Input

	ToEndpointPortPatchArrayOutput() EndpointPortPatchArrayOutput
	ToEndpointPortPatchArrayOutputWithContext(context.Context) EndpointPortPatchArrayOutput
}

EndpointPortPatchArrayInput is an input type that accepts EndpointPortPatchArray and EndpointPortPatchArrayOutput values. You can construct a concrete instance of `EndpointPortPatchArrayInput` via: 

EndpointPortPatchArray{ EndpointPortPatchArgs{...} }

type EndpointPortPatchArrayOutput 

type EndpointPortPatchArrayOutput struct{ *pulumi.OutputState }

func (EndpointPortPatchArrayOutput) ElementType 

func (EndpointPortPatchArrayOutput) ElementType() reflect.Type

func (EndpointPortPatchArrayOutput) Index 

func (o EndpointPortPatchArrayOutput) Index(i pulumi.IntInput) EndpointPortPatchOutput

func (EndpointPortPatchArrayOutput) ToEndpointPortPatchArrayOutput 

func (o EndpointPortPatchArrayOutput) ToEndpointPortPatchArrayOutput() EndpointPortPatchArrayOutput

func (EndpointPortPatchArrayOutput) ToEndpointPortPatchArrayOutputWithContext 

func (o EndpointPortPatchArrayOutput) ToEndpointPortPatchArrayOutputWithContext(ctx context.Context) EndpointPortPatchArrayOutput

type EndpointPortPatchInput 

type EndpointPortPatchInput interface {
	pulumi.Input

	ToEndpointPortPatchOutput() EndpointPortPatchOutput
	ToEndpointPortPatchOutputWithContext(context.Context) EndpointPortPatchOutput
}

EndpointPortPatchInput is an input type that accepts EndpointPortPatchArgs and EndpointPortPatchOutput values. You can construct a concrete instance of `EndpointPortPatchInput` via: 

EndpointPortPatchArgs{...}

type EndpointPortPatchOutput 

type EndpointPortPatchOutput struct{ *pulumi.OutputState }

EndpointPort represents a Port used by an EndpointSlice

func (EndpointPortPatchOutput) AppProtocol 

func (o EndpointPortPatchOutput) AppProtocol() pulumi.StringPtrOutput

The application protocol for this port. This is used as a hint for implementations to offer richer behavior for protocols that they understand. This field follows standard Kubernetes label syntax. Valid values are either:

* Un-prefixed protocol names - reserved for IANA standard service names (as per RFC-6335 and https://www.iana.org/assignments/service-names).

* Kubernetes-defined prefixed names:

* Other protocols should use implementation-defined prefixed names such as mycompany.com/my-custom-protocol.

func (EndpointPortPatchOutput) ElementType 

func (EndpointPortPatchOutput) ElementType() reflect.Type

func (EndpointPortPatchOutput) Name 

func (o EndpointPortPatchOutput) Name() pulumi.StringPtrOutput

name represents the name of this port. All ports in an EndpointSlice must have a unique name. If the EndpointSlice is derived from a Kubernetes service, this corresponds to the Service.ports[].name. Name must either be an empty string or pass DNS_LABEL validation: * must be no more than 63 characters long. * must consist of lower case alphanumeric characters or '-'. * must start and end with an alphanumeric character. Default is empty string.

func (EndpointPortPatchOutput) Port 

func (o EndpointPortPatchOutput) Port() pulumi.IntPtrOutput

port represents the port number of the endpoint. If this is not specified, ports are not restricted and must be interpreted in the context of the specific consumer.

func (EndpointPortPatchOutput) Protocol 

func (o EndpointPortPatchOutput) Protocol() pulumi.StringPtrOutput

protocol represents the IP protocol for this port. Must be UDP, TCP, or SCTP. Default is TCP.

func (EndpointPortPatchOutput) ToEndpointPortPatchOutput 

func (o EndpointPortPatchOutput) ToEndpointPortPatchOutput() EndpointPortPatchOutput

func (EndpointPortPatchOutput) ToEndpointPortPatchOutputWithContext 

func (o EndpointPortPatchOutput) ToEndpointPortPatchOutputWithContext(ctx context.Context) EndpointPortPatchOutput

type EndpointSlice 

type EndpointSlice struct {
	pulumi.CustomResourceState

	// addressType specifies the type of address carried by this EndpointSlice. All addresses in this slice must be the same type. This field is immutable after creation. The following address types are currently supported: * IPv4: Represents an IPv4 Address. * IPv6: Represents an IPv6 Address. * FQDN: Represents a Fully Qualified Domain Name.
	AddressType pulumi.StringOutput `pulumi:"addressType"`
	// APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
	ApiVersion pulumi.StringOutput `pulumi:"apiVersion"`
	// endpoints is a list of unique endpoints in this slice. Each slice may include a maximum of 1000 endpoints.
	Endpoints EndpointArrayOutput `pulumi:"endpoints"`
	// Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
	Kind pulumi.StringOutput `pulumi:"kind"`
	// Standard object's metadata.
	Metadata metav1.ObjectMetaOutput `pulumi:"metadata"`
	// ports specifies the list of network ports exposed by each endpoint in this slice. Each port must have a unique name. When ports is empty, it indicates that there are no defined ports. When a port is defined with a nil port value, it indicates "all ports". Each slice may include a maximum of 100 ports.
	Ports EndpointPortArrayOutput `pulumi:"ports"`
}

EndpointSlice represents a subset of the endpoints that implement a service. For a given service there may be multiple EndpointSlice objects, selected by labels, which must be joined to produce the full set of endpoints.

func GetEndpointSlice 

func GetEndpointSlice(ctx *pulumi.Context,
	name string, id pulumi.IDInput, state *EndpointSliceState, opts ...pulumi.ResourceOption) (*EndpointSlice, error)

GetEndpointSlice gets an existing EndpointSlice resource's state with the given name, ID, and optional state properties that are used to uniquely qualify the lookup (nil if not required).

func NewEndpointSlice 

func NewEndpointSlice(ctx *pulumi.Context,
	name string, args *EndpointSliceArgs, opts ...pulumi.ResourceOption) (*EndpointSlice, error)

NewEndpointSlice registers a new resource with the given unique name, arguments, and options.

func (*EndpointSlice) ElementType 

func (*EndpointSlice) ElementType() reflect.Type

func (*EndpointSlice) ToEndpointSliceOutput 

func (i *EndpointSlice) ToEndpointSliceOutput() EndpointSliceOutput

func (*EndpointSlice) ToEndpointSliceOutputWithContext 

func (i *EndpointSlice) ToEndpointSliceOutputWithContext(ctx context.Context) EndpointSliceOutput

type EndpointSliceArgs 

type EndpointSliceArgs struct {
	// addressType specifies the type of address carried by this EndpointSlice. All addresses in this slice must be the same type. This field is immutable after creation. The following address types are currently supported: * IPv4: Represents an IPv4 Address. * IPv6: Represents an IPv6 Address. * FQDN: Represents a Fully Qualified Domain Name.
	AddressType pulumi.StringInput
	// APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
	ApiVersion pulumi.StringPtrInput
	// endpoints is a list of unique endpoints in this slice. Each slice may include a maximum of 1000 endpoints.
	Endpoints EndpointArrayInput
	// Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
	Kind pulumi.StringPtrInput
	// Standard object's metadata.
	Metadata metav1.ObjectMetaPtrInput
	// ports specifies the list of network ports exposed by each endpoint in this slice. Each port must have a unique name. When ports is empty, it indicates that there are no defined ports. When a port is defined with a nil port value, it indicates "all ports". Each slice may include a maximum of 100 ports.
	Ports EndpointPortArrayInput
}

The set of arguments for constructing a EndpointSlice resource.

func (EndpointSliceArgs) ElementType 

func (EndpointSliceArgs) ElementType() reflect.Type

type EndpointSliceArray 

type EndpointSliceArray []EndpointSliceInput

func (EndpointSliceArray) ElementType 

func (EndpointSliceArray) ElementType() reflect.Type

func (EndpointSliceArray) ToEndpointSliceArrayOutput 

func (i EndpointSliceArray) ToEndpointSliceArrayOutput() EndpointSliceArrayOutput

func (EndpointSliceArray) ToEndpointSliceArrayOutputWithContext 

func (i EndpointSliceArray) ToEndpointSliceArrayOutputWithContext(ctx context.Context) EndpointSliceArrayOutput

type EndpointSliceArrayInput 

type EndpointSliceArrayInput interface {
	pulumi.Input

	ToEndpointSliceArrayOutput() EndpointSliceArrayOutput
	ToEndpointSliceArrayOutputWithContext(context.Context) EndpointSliceArrayOutput
}

EndpointSliceArrayInput is an input type that accepts EndpointSliceArray and EndpointSliceArrayOutput values. You can construct a concrete instance of `EndpointSliceArrayInput` via: 

EndpointSliceArray{ EndpointSliceArgs{...} }

type EndpointSliceArrayOutput 

type EndpointSliceArrayOutput struct{ *pulumi.OutputState }

func (EndpointSliceArrayOutput) ElementType 

func (EndpointSliceArrayOutput) ElementType() reflect.Type

func (EndpointSliceArrayOutput) Index 

func (o EndpointSliceArrayOutput) Index(i pulumi.IntInput) EndpointSliceOutput

func (EndpointSliceArrayOutput) ToEndpointSliceArrayOutput 

func (o EndpointSliceArrayOutput) ToEndpointSliceArrayOutput() EndpointSliceArrayOutput

func (EndpointSliceArrayOutput) ToEndpointSliceArrayOutputWithContext 

func (o EndpointSliceArrayOutput) ToEndpointSliceArrayOutputWithContext(ctx context.Context) EndpointSliceArrayOutput

type EndpointSliceInput 

type EndpointSliceInput interface {
	pulumi.Input

	ToEndpointSliceOutput() EndpointSliceOutput
	ToEndpointSliceOutputWithContext(ctx context.Context) EndpointSliceOutput
}

type EndpointSliceList 

type EndpointSliceList struct {
	pulumi.CustomResourceState

	// APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
	ApiVersion pulumi.StringOutput `pulumi:"apiVersion"`
	// items is the list of endpoint slices
	Items EndpointSliceTypeArrayOutput `pulumi:"items"`
	// Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
	Kind pulumi.StringOutput `pulumi:"kind"`
	// Standard list metadata.
	Metadata metav1.ListMetaOutput `pulumi:"metadata"`
}

EndpointSliceList represents a list of endpoint slices

func GetEndpointSliceList 

func GetEndpointSliceList(ctx *pulumi.Context,
	name string, id pulumi.IDInput, state *EndpointSliceListState, opts ...pulumi.ResourceOption) (*EndpointSliceList, error)

GetEndpointSliceList gets an existing EndpointSliceList resource's state with the given name, ID, and optional state properties that are used to uniquely qualify the lookup (nil if not required).

func NewEndpointSliceList 

func NewEndpointSliceList(ctx *pulumi.Context,
	name string, args *EndpointSliceListArgs, opts ...pulumi.ResourceOption) (*EndpointSliceList, error)

NewEndpointSliceList registers a new resource with the given unique name, arguments, and options.

func (*EndpointSliceList) ElementType 

func (*EndpointSliceList) ElementType() reflect.Type

func (*EndpointSliceList) ToEndpointSliceListOutput 

func (i *EndpointSliceList) ToEndpointSliceListOutput() EndpointSliceListOutput

func (*EndpointSliceList) ToEndpointSliceListOutputWithContext 

func (i *EndpointSliceList) ToEndpointSliceListOutputWithContext(ctx context.Context) EndpointSliceListOutput

type EndpointSliceListArgs 

type EndpointSliceListArgs struct {
	// APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
	ApiVersion pulumi.StringPtrInput
	// items is the list of endpoint slices
	Items EndpointSliceTypeArrayInput
	// Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
	Kind pulumi.StringPtrInput
	// Standard list metadata.
	Metadata metav1.ListMetaPtrInput
}

The set of arguments for constructing a EndpointSliceList resource.

func (EndpointSliceListArgs) ElementType 

func (EndpointSliceListArgs) ElementType() reflect.Type

type EndpointSliceListArray 

type EndpointSliceListArray []EndpointSliceListInput

func (EndpointSliceListArray) ElementType 

func (EndpointSliceListArray) ElementType() reflect.Type

func (EndpointSliceListArray) ToEndpointSliceListArrayOutput 

func (i EndpointSliceListArray) ToEndpointSliceListArrayOutput() EndpointSliceListArrayOutput

func (EndpointSliceListArray) ToEndpointSliceListArrayOutputWithContext 

func (i EndpointSliceListArray) ToEndpointSliceListArrayOutputWithContext(ctx context.Context) EndpointSliceListArrayOutput

type EndpointSliceListArrayInput 

type EndpointSliceListArrayInput interface {
	pulumi.Input

	ToEndpointSliceListArrayOutput() EndpointSliceListArrayOutput
	ToEndpointSliceListArrayOutputWithContext(context.Context) EndpointSliceListArrayOutput
}

EndpointSliceListArrayInput is an input type that accepts EndpointSliceListArray and EndpointSliceListArrayOutput values. You can construct a concrete instance of `EndpointSliceListArrayInput` via: 

EndpointSliceListArray{ EndpointSliceListArgs{...} }

type EndpointSliceListArrayOutput 

type EndpointSliceListArrayOutput struct{ *pulumi.OutputState }

func (EndpointSliceListArrayOutput) ElementType 

func (EndpointSliceListArrayOutput) ElementType() reflect.Type

func (EndpointSliceListArrayOutput) Index 

func (o EndpointSliceListArrayOutput) Index(i pulumi.IntInput) EndpointSliceListOutput

func (EndpointSliceListArrayOutput) ToEndpointSliceListArrayOutput 

func (o EndpointSliceListArrayOutput) ToEndpointSliceListArrayOutput() EndpointSliceListArrayOutput

func (EndpointSliceListArrayOutput) ToEndpointSliceListArrayOutputWithContext 

func (o EndpointSliceListArrayOutput) ToEndpointSliceListArrayOutputWithContext(ctx context.Context) EndpointSliceListArrayOutput

type EndpointSliceListInput 

type EndpointSliceListInput interface {
	pulumi.Input

	ToEndpointSliceListOutput() EndpointSliceListOutput
	ToEndpointSliceListOutputWithContext(ctx context.Context) EndpointSliceListOutput
}

type EndpointSliceListMap 

type EndpointSliceListMap map[string]EndpointSliceListInput

func (EndpointSliceListMap) ElementType 

func (EndpointSliceListMap) ElementType() reflect.Type

func (EndpointSliceListMap) ToEndpointSliceListMapOutput 

func (i EndpointSliceListMap) ToEndpointSliceListMapOutput() EndpointSliceListMapOutput

func (EndpointSliceListMap) ToEndpointSliceListMapOutputWithContext 

func (i EndpointSliceListMap) ToEndpointSliceListMapOutputWithContext(ctx context.Context) EndpointSliceListMapOutput

type EndpointSliceListMapInput 

type EndpointSliceListMapInput interface {
	pulumi.Input

	ToEndpointSliceListMapOutput() EndpointSliceListMapOutput
	ToEndpointSliceListMapOutputWithContext(context.Context) EndpointSliceListMapOutput
}

EndpointSliceListMapInput is an input type that accepts EndpointSliceListMap and EndpointSliceListMapOutput values. You can construct a concrete instance of `EndpointSliceListMapInput` via: 

EndpointSliceListMap{ "key": EndpointSliceListArgs{...} }

type EndpointSliceListMapOutput 

type EndpointSliceListMapOutput struct{ *pulumi.OutputState }

func (EndpointSliceListMapOutput) ElementType 

func (EndpointSliceListMapOutput) ElementType() reflect.Type

func (EndpointSliceListMapOutput) MapIndex 

func (o EndpointSliceListMapOutput) MapIndex(k pulumi.StringInput) EndpointSliceListOutput

func (EndpointSliceListMapOutput) ToEndpointSliceListMapOutput 

func (o EndpointSliceListMapOutput) ToEndpointSliceListMapOutput() EndpointSliceListMapOutput

func (EndpointSliceListMapOutput) ToEndpointSliceListMapOutputWithContext 

func (o EndpointSliceListMapOutput) ToEndpointSliceListMapOutputWithContext(ctx context.Context) EndpointSliceListMapOutput

type EndpointSliceListOutput 

type EndpointSliceListOutput struct{ *pulumi.OutputState }

func (EndpointSliceListOutput) ApiVersion 

func (o EndpointSliceListOutput) ApiVersion() pulumi.StringOutput

APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources

func (EndpointSliceListOutput) ElementType 

func (EndpointSliceListOutput) ElementType() reflect.Type

func (EndpointSliceListOutput) Items 

func (o EndpointSliceListOutput) Items() EndpointSliceTypeArrayOutput

items is the list of endpoint slices

func (EndpointSliceListOutput) Kind 

func (o EndpointSliceListOutput) Kind() pulumi.StringOutput

Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds

func (EndpointSliceListOutput) Metadata 

func (o EndpointSliceListOutput) Metadata() metav1.ListMetaOutput

Standard list metadata.

func (EndpointSliceListOutput) ToEndpointSliceListOutput 

func (o EndpointSliceListOutput) ToEndpointSliceListOutput() EndpointSliceListOutput

func (EndpointSliceListOutput) ToEndpointSliceListOutputWithContext 

func (o EndpointSliceListOutput) ToEndpointSliceListOutputWithContext(ctx context.Context) EndpointSliceListOutput

type EndpointSliceListState 

type EndpointSliceListState struct {
}

func (EndpointSliceListState) ElementType 

func (EndpointSliceListState) ElementType() reflect.Type

type EndpointSliceListType 

type EndpointSliceListType struct {
	// APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
	ApiVersion *string `pulumi:"apiVersion"`
	// items is the list of endpoint slices
	Items []EndpointSliceType `pulumi:"items"`
	// Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
	Kind *string `pulumi:"kind"`
	// Standard list metadata.
	Metadata *metav1.ListMeta `pulumi:"metadata"`
}

EndpointSliceList represents a list of endpoint slices

type EndpointSliceListTypeArgs 

type EndpointSliceListTypeArgs struct {
	// APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
	ApiVersion pulumi.StringPtrInput `pulumi:"apiVersion"`
	// items is the list of endpoint slices
	Items EndpointSliceTypeArrayInput `pulumi:"items"`
	// Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
	Kind pulumi.StringPtrInput `pulumi:"kind"`
	// Standard list metadata.
	Metadata metav1.ListMetaPtrInput `pulumi:"metadata"`
}

EndpointSliceList represents a list of endpoint slices

func (EndpointSliceListTypeArgs) ElementType 

func (EndpointSliceListTypeArgs) ElementType() reflect.Type

func (EndpointSliceListTypeArgs) ToEndpointSliceListTypeOutput 

func (i EndpointSliceListTypeArgs) ToEndpointSliceListTypeOutput() EndpointSliceListTypeOutput

func (EndpointSliceListTypeArgs) ToEndpointSliceListTypeOutputWithContext 

func (i EndpointSliceListTypeArgs) ToEndpointSliceListTypeOutputWithContext(ctx context.Context) EndpointSliceListTypeOutput

type EndpointSliceListTypeInput 

type EndpointSliceListTypeInput interface {
	pulumi.Input

	ToEndpointSliceListTypeOutput() EndpointSliceListTypeOutput
	ToEndpointSliceListTypeOutputWithContext(context.Context) EndpointSliceListTypeOutput
}

EndpointSliceListTypeInput is an input type that accepts EndpointSliceListTypeArgs and EndpointSliceListTypeOutput values. You can construct a concrete instance of `EndpointSliceListTypeInput` via: 

EndpointSliceListTypeArgs{...}

type EndpointSliceListTypeOutput 

type EndpointSliceListTypeOutput struct{ *pulumi.OutputState }

EndpointSliceList represents a list of endpoint slices

func (EndpointSliceListTypeOutput) ApiVersion 

func (o EndpointSliceListTypeOutput) ApiVersion() pulumi.StringPtrOutput

APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources

func (EndpointSliceListTypeOutput) ElementType 

func (EndpointSliceListTypeOutput) ElementType() reflect.Type

func (EndpointSliceListTypeOutput) Items 

func (o EndpointSliceListTypeOutput) Items() EndpointSliceTypeArrayOutput

items is the list of endpoint slices

func (EndpointSliceListTypeOutput) Kind 

func (o EndpointSliceListTypeOutput) Kind() pulumi.StringPtrOutput

Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds

func (EndpointSliceListTypeOutput) Metadata 

func (o EndpointSliceListTypeOutput) Metadata() metav1.ListMetaPtrOutput

Standard list metadata.

func (EndpointSliceListTypeOutput) ToEndpointSliceListTypeOutput 

func (o EndpointSliceListTypeOutput) ToEndpointSliceListTypeOutput() EndpointSliceListTypeOutput

func (EndpointSliceListTypeOutput) ToEndpointSliceListTypeOutputWithContext 

func (o EndpointSliceListTypeOutput) ToEndpointSliceListTypeOutputWithContext(ctx context.Context) EndpointSliceListTypeOutput

type EndpointSliceMap 

type EndpointSliceMap map[string]EndpointSliceInput

func (EndpointSliceMap) ElementType 

func (EndpointSliceMap) ElementType() reflect.Type

func (EndpointSliceMap) ToEndpointSliceMapOutput 

func (i EndpointSliceMap) ToEndpointSliceMapOutput() EndpointSliceMapOutput

func (EndpointSliceMap) ToEndpointSliceMapOutputWithContext 

func (i EndpointSliceMap) ToEndpointSliceMapOutputWithContext(ctx context.Context) EndpointSliceMapOutput

type EndpointSliceMapInput 

type EndpointSliceMapInput interface {
	pulumi.Input

	ToEndpointSliceMapOutput() EndpointSliceMapOutput
	ToEndpointSliceMapOutputWithContext(context.Context) EndpointSliceMapOutput
}

EndpointSliceMapInput is an input type that accepts EndpointSliceMap and EndpointSliceMapOutput values. You can construct a concrete instance of `EndpointSliceMapInput` via: 

EndpointSliceMap{ "key": EndpointSliceArgs{...} }

type EndpointSliceMapOutput 

type EndpointSliceMapOutput struct{ *pulumi.OutputState }

func (EndpointSliceMapOutput) ElementType 

func (EndpointSliceMapOutput) ElementType() reflect.Type

func (EndpointSliceMapOutput) MapIndex 

func (o EndpointSliceMapOutput) MapIndex(k pulumi.StringInput) EndpointSliceOutput

func (EndpointSliceMapOutput) ToEndpointSliceMapOutput 

func (o EndpointSliceMapOutput) ToEndpointSliceMapOutput() EndpointSliceMapOutput

func (EndpointSliceMapOutput) ToEndpointSliceMapOutputWithContext 

func (o EndpointSliceMapOutput) ToEndpointSliceMapOutputWithContext(ctx context.Context) EndpointSliceMapOutput

type EndpointSliceOutput 

type EndpointSliceOutput struct{ *pulumi.OutputState }

func (EndpointSliceOutput) AddressType 

func (o EndpointSliceOutput) AddressType() pulumi.StringOutput

addressType specifies the type of address carried by this EndpointSlice. All addresses in this slice must be the same type. This field is immutable after creation. The following address types are currently supported: * IPv4: Represents an IPv4 Address. * IPv6: Represents an IPv6 Address. * FQDN: Represents a Fully Qualified Domain Name.

func (EndpointSliceOutput) ApiVersion 

func (o EndpointSliceOutput) ApiVersion() pulumi.StringOutput

APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources

func (EndpointSliceOutput) ElementType 

func (EndpointSliceOutput) ElementType() reflect.Type

func (EndpointSliceOutput) Endpoints 

func (o EndpointSliceOutput) Endpoints() EndpointArrayOutput

endpoints is a list of unique endpoints in this slice. Each slice may include a maximum of 1000 endpoints.

func (EndpointSliceOutput) Kind 

func (o EndpointSliceOutput) Kind() pulumi.StringOutput

Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds

func (EndpointSliceOutput) Metadata 

func (o EndpointSliceOutput) Metadata() metav1.ObjectMetaOutput

Standard object's metadata.

func (EndpointSliceOutput) Ports 

func (o EndpointSliceOutput) Ports() EndpointPortArrayOutput

ports specifies the list of network ports exposed by each endpoint in this slice. Each port must have a unique name. When ports is empty, it indicates that there are no defined ports. When a port is defined with a nil port value, it indicates "all ports". Each slice may include a maximum of 100 ports.

func (EndpointSliceOutput) ToEndpointSliceOutput 

func (o EndpointSliceOutput) ToEndpointSliceOutput() EndpointSliceOutput

func (EndpointSliceOutput) ToEndpointSliceOutputWithContext 

func (o EndpointSliceOutput) ToEndpointSliceOutputWithContext(ctx context.Context) EndpointSliceOutput

type EndpointSlicePatch 

type EndpointSlicePatch struct {
	pulumi.CustomResourceState

	// addressType specifies the type of address carried by this EndpointSlice. All addresses in this slice must be the same type. This field is immutable after creation. The following address types are currently supported: * IPv4: Represents an IPv4 Address. * IPv6: Represents an IPv6 Address. * FQDN: Represents a Fully Qualified Domain Name.
	AddressType pulumi.StringPtrOutput `pulumi:"addressType"`
	// APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
	ApiVersion pulumi.StringPtrOutput `pulumi:"apiVersion"`
	// endpoints is a list of unique endpoints in this slice. Each slice may include a maximum of 1000 endpoints.
	Endpoints EndpointPatchArrayOutput `pulumi:"endpoints"`
	// Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
	Kind pulumi.StringPtrOutput `pulumi:"kind"`
	// Standard object's metadata.
	Metadata metav1.ObjectMetaPatchPtrOutput `pulumi:"metadata"`
	// ports specifies the list of network ports exposed by each endpoint in this slice. Each port must have a unique name. When ports is empty, it indicates that there are no defined ports. When a port is defined with a nil port value, it indicates "all ports". Each slice may include a maximum of 100 ports.
	Ports EndpointPortPatchArrayOutput `pulumi:"ports"`
}

Patch resources are used to modify existing Kubernetes resources by using Server-Side Apply updates. The name of the resource must be specified, but all other properties are optional. More than one patch may be applied to the same resource, and a random FieldManager name will be used for each Patch resource. Conflicts will result in an error by default, but can be forced using the "pulumi.com/patchForce" annotation. See the [Server-Side Apply Docs](https://www.pulumi.com/registry/packages/kubernetes/how-to-guides/managing-resources-with-server-side-apply/) for additional information about using Server-Side Apply to manage Kubernetes resources with Pulumi. EndpointSlice represents a subset of the endpoints that implement a service. For a given service there may be multiple EndpointSlice objects, selected by labels, which must be joined to produce the full set of endpoints.

func GetEndpointSlicePatch 

func GetEndpointSlicePatch(ctx *pulumi.Context,
	name string, id pulumi.IDInput, state *EndpointSlicePatchState, opts ...pulumi.ResourceOption) (*EndpointSlicePatch, error)

GetEndpointSlicePatch gets an existing EndpointSlicePatch resource's state with the given name, ID, and optional state properties that are used to uniquely qualify the lookup (nil if not required).

func NewEndpointSlicePatch 

func NewEndpointSlicePatch(ctx *pulumi.Context,
	name string, args *EndpointSlicePatchArgs, opts ...pulumi.ResourceOption) (*EndpointSlicePatch, error)

NewEndpointSlicePatch registers a new resource with the given unique name, arguments, and options.

func (*EndpointSlicePatch) ElementType 

func (*EndpointSlicePatch) ElementType() reflect.Type

func (*EndpointSlicePatch) ToEndpointSlicePatchOutput 

func (i *EndpointSlicePatch) ToEndpointSlicePatchOutput() EndpointSlicePatchOutput

func (*EndpointSlicePatch) ToEndpointSlicePatchOutputWithContext 

func (i *EndpointSlicePatch) ToEndpointSlicePatchOutputWithContext(ctx context.Context) EndpointSlicePatchOutput

type EndpointSlicePatchArgs 

type EndpointSlicePatchArgs struct {
	// addressType specifies the type of address carried by this EndpointSlice. All addresses in this slice must be the same type. This field is immutable after creation. The following address types are currently supported: * IPv4: Represents an IPv4 Address. * IPv6: Represents an IPv6 Address. * FQDN: Represents a Fully Qualified Domain Name.
	AddressType pulumi.StringPtrInput
	// APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
	ApiVersion pulumi.StringPtrInput
	// endpoints is a list of unique endpoints in this slice. Each slice may include a maximum of 1000 endpoints.
	Endpoints EndpointPatchArrayInput
	// Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
	Kind pulumi.StringPtrInput
	// Standard object's metadata.
	Metadata metav1.ObjectMetaPatchPtrInput
	// ports specifies the list of network ports exposed by each endpoint in this slice. Each port must have a unique name. When ports is empty, it indicates that there are no defined ports. When a port is defined with a nil port value, it indicates "all ports". Each slice may include a maximum of 100 ports.
	Ports EndpointPortPatchArrayInput
}

The set of arguments for constructing a EndpointSlicePatch resource.

func (EndpointSlicePatchArgs) ElementType 

func (EndpointSlicePatchArgs) ElementType() reflect.Type

type EndpointSlicePatchArray 

type EndpointSlicePatchArray []EndpointSlicePatchInput

func (EndpointSlicePatchArray) ElementType 

func (EndpointSlicePatchArray) ElementType() reflect.Type

func (EndpointSlicePatchArray) ToEndpointSlicePatchArrayOutput 

func (i EndpointSlicePatchArray) ToEndpointSlicePatchArrayOutput() EndpointSlicePatchArrayOutput

func (EndpointSlicePatchArray) ToEndpointSlicePatchArrayOutputWithContext 

func (i EndpointSlicePatchArray) ToEndpointSlicePatchArrayOutputWithContext(ctx context.Context) EndpointSlicePatchArrayOutput

type EndpointSlicePatchArrayInput 

type EndpointSlicePatchArrayInput interface {
	pulumi.Input

	ToEndpointSlicePatchArrayOutput() EndpointSlicePatchArrayOutput
	ToEndpointSlicePatchArrayOutputWithContext(context.Context) EndpointSlicePatchArrayOutput
}

EndpointSlicePatchArrayInput is an input type that accepts EndpointSlicePatchArray and EndpointSlicePatchArrayOutput values. You can construct a concrete instance of `EndpointSlicePatchArrayInput` via: 

EndpointSlicePatchArray{ EndpointSlicePatchArgs{...} }

type EndpointSlicePatchArrayOutput 

type EndpointSlicePatchArrayOutput struct{ *pulumi.OutputState }

func (EndpointSlicePatchArrayOutput) ElementType 

func (EndpointSlicePatchArrayOutput) ElementType() reflect.Type

func (EndpointSlicePatchArrayOutput) Index 

func (o EndpointSlicePatchArrayOutput) Index(i pulumi.IntInput) EndpointSlicePatchOutput

func (EndpointSlicePatchArrayOutput) ToEndpointSlicePatchArrayOutput 

func (o EndpointSlicePatchArrayOutput) ToEndpointSlicePatchArrayOutput() EndpointSlicePatchArrayOutput

func (EndpointSlicePatchArrayOutput) ToEndpointSlicePatchArrayOutputWithContext 

func (o EndpointSlicePatchArrayOutput) ToEndpointSlicePatchArrayOutputWithContext(ctx context.Context) EndpointSlicePatchArrayOutput

type EndpointSlicePatchInput 

type EndpointSlicePatchInput interface {
	pulumi.Input

	ToEndpointSlicePatchOutput() EndpointSlicePatchOutput
	ToEndpointSlicePatchOutputWithContext(ctx context.Context) EndpointSlicePatchOutput
}

type EndpointSlicePatchMap 

type EndpointSlicePatchMap map[string]EndpointSlicePatchInput

func (EndpointSlicePatchMap) ElementType 

func (EndpointSlicePatchMap) ElementType() reflect.Type

func (EndpointSlicePatchMap) ToEndpointSlicePatchMapOutput 

func (i EndpointSlicePatchMap) ToEndpointSlicePatchMapOutput() EndpointSlicePatchMapOutput

func (EndpointSlicePatchMap) ToEndpointSlicePatchMapOutputWithContext 

func (i EndpointSlicePatchMap) ToEndpointSlicePatchMapOutputWithContext(ctx context.Context) EndpointSlicePatchMapOutput

type EndpointSlicePatchMapInput 

type EndpointSlicePatchMapInput interface {
	pulumi.Input

	ToEndpointSlicePatchMapOutput() EndpointSlicePatchMapOutput
	ToEndpointSlicePatchMapOutputWithContext(context.Context) EndpointSlicePatchMapOutput
}

EndpointSlicePatchMapInput is an input type that accepts EndpointSlicePatchMap and EndpointSlicePatchMapOutput values. You can construct a concrete instance of `EndpointSlicePatchMapInput` via: 

EndpointSlicePatchMap{ "key": EndpointSlicePatchArgs{...} }

type EndpointSlicePatchMapOutput 

type EndpointSlicePatchMapOutput struct{ *pulumi.OutputState }

func (EndpointSlicePatchMapOutput) ElementType 

func (EndpointSlicePatchMapOutput) ElementType() reflect.Type

func (EndpointSlicePatchMapOutput) MapIndex 

func (o EndpointSlicePatchMapOutput) MapIndex(k pulumi.StringInput) EndpointSlicePatchOutput

func (EndpointSlicePatchMapOutput) ToEndpointSlicePatchMapOutput 

func (o EndpointSlicePatchMapOutput) ToEndpointSlicePatchMapOutput() EndpointSlicePatchMapOutput

func (EndpointSlicePatchMapOutput) ToEndpointSlicePatchMapOutputWithContext 

func (o EndpointSlicePatchMapOutput) ToEndpointSlicePatchMapOutputWithContext(ctx context.Context) EndpointSlicePatchMapOutput

type EndpointSlicePatchOutput 

type EndpointSlicePatchOutput struct{ *pulumi.OutputState }

func (EndpointSlicePatchOutput) AddressType 

func (o EndpointSlicePatchOutput) AddressType() pulumi.StringPtrOutput

addressType specifies the type of address carried by this EndpointSlice. All addresses in this slice must be the same type. This field is immutable after creation. The following address types are currently supported: * IPv4: Represents an IPv4 Address. * IPv6: Represents an IPv6 Address. * FQDN: Represents a Fully Qualified Domain Name.

func (EndpointSlicePatchOutput) ApiVersion 

func (o EndpointSlicePatchOutput) ApiVersion() pulumi.StringPtrOutput

APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources

func (EndpointSlicePatchOutput) ElementType 

func (EndpointSlicePatchOutput) ElementType() reflect.Type

func (EndpointSlicePatchOutput) Endpoints 

func (o EndpointSlicePatchOutput) Endpoints() EndpointPatchArrayOutput

endpoints is a list of unique endpoints in this slice. Each slice may include a maximum of 1000 endpoints.

func (EndpointSlicePatchOutput) Kind 

func (o EndpointSlicePatchOutput) Kind() pulumi.StringPtrOutput

Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds

func (EndpointSlicePatchOutput) Metadata 

func (o EndpointSlicePatchOutput) Metadata() metav1.ObjectMetaPatchPtrOutput

Standard object's metadata.

func (EndpointSlicePatchOutput) Ports 

func (o EndpointSlicePatchOutput) Ports() EndpointPortPatchArrayOutput

ports specifies the list of network ports exposed by each endpoint in this slice. Each port must have a unique name. When ports is empty, it indicates that there are no defined ports. When a port is defined with a nil port value, it indicates "all ports". Each slice may include a maximum of 100 ports.

func (EndpointSlicePatchOutput) ToEndpointSlicePatchOutput 

func (o EndpointSlicePatchOutput) ToEndpointSlicePatchOutput() EndpointSlicePatchOutput

func (EndpointSlicePatchOutput) ToEndpointSlicePatchOutputWithContext 

func (o EndpointSlicePatchOutput) ToEndpointSlicePatchOutputWithContext(ctx context.Context) EndpointSlicePatchOutput

type EndpointSlicePatchState 

type EndpointSlicePatchState struct {
}

func (EndpointSlicePatchState) ElementType 

func (EndpointSlicePatchState) ElementType() reflect.Type

type EndpointSlicePatchType 

type EndpointSlicePatchType struct {
	// addressType specifies the type of address carried by this EndpointSlice. All addresses in this slice must be the same type. This field is immutable after creation. The following address types are currently supported: * IPv4: Represents an IPv4 Address. * IPv6: Represents an IPv6 Address. * FQDN: Represents a Fully Qualified Domain Name.
	AddressType *string `pulumi:"addressType"`
	// APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
	ApiVersion *string `pulumi:"apiVersion"`
	// endpoints is a list of unique endpoints in this slice. Each slice may include a maximum of 1000 endpoints.
	Endpoints []EndpointPatch `pulumi:"endpoints"`
	// Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
	Kind *string `pulumi:"kind"`
	// Standard object's metadata.
	Metadata *metav1.ObjectMetaPatch `pulumi:"metadata"`
	// ports specifies the list of network ports exposed by each endpoint in this slice. Each port must have a unique name. When ports is empty, it indicates that there are no defined ports. When a port is defined with a nil port value, it indicates "all ports". Each slice may include a maximum of 100 ports.
	Ports []EndpointPortPatch `pulumi:"ports"`
}

EndpointSlice represents a subset of the endpoints that implement a service. For a given service there may be multiple EndpointSlice objects, selected by labels, which must be joined to produce the full set of endpoints.

type EndpointSlicePatchTypeArgs 

type EndpointSlicePatchTypeArgs struct {
	// addressType specifies the type of address carried by this EndpointSlice. All addresses in this slice must be the same type. This field is immutable after creation. The following address types are currently supported: * IPv4: Represents an IPv4 Address. * IPv6: Represents an IPv6 Address. * FQDN: Represents a Fully Qualified Domain Name.
	AddressType pulumi.StringPtrInput `pulumi:"addressType"`
	// APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
	ApiVersion pulumi.StringPtrInput `pulumi:"apiVersion"`
	// endpoints is a list of unique endpoints in this slice. Each slice may include a maximum of 1000 endpoints.
	Endpoints EndpointPatchArrayInput `pulumi:"endpoints"`
	// Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
	Kind pulumi.StringPtrInput `pulumi:"kind"`
	// Standard object's metadata.
	Metadata metav1.ObjectMetaPatchPtrInput `pulumi:"metadata"`
	// ports specifies the list of network ports exposed by each endpoint in this slice. Each port must have a unique name. When ports is empty, it indicates that there are no defined ports. When a port is defined with a nil port value, it indicates "all ports". Each slice may include a maximum of 100 ports.
	Ports EndpointPortPatchArrayInput `pulumi:"ports"`
}

EndpointSlice represents a subset of the endpoints that implement a service. For a given service there may be multiple EndpointSlice objects, selected by labels, which must be joined to produce the full set of endpoints.

func (EndpointSlicePatchTypeArgs) ElementType 

func (EndpointSlicePatchTypeArgs) ElementType() reflect.Type

func (EndpointSlicePatchTypeArgs) ToEndpointSlicePatchTypeOutput 

func (i EndpointSlicePatchTypeArgs) ToEndpointSlicePatchTypeOutput() EndpointSlicePatchTypeOutput

func (EndpointSlicePatchTypeArgs) ToEndpointSlicePatchTypeOutputWithContext 

func (i EndpointSlicePatchTypeArgs) ToEndpointSlicePatchTypeOutputWithContext(ctx context.Context) EndpointSlicePatchTypeOutput

type EndpointSlicePatchTypeInput 

type EndpointSlicePatchTypeInput interface {
	pulumi.Input

	ToEndpointSlicePatchTypeOutput() EndpointSlicePatchTypeOutput
	ToEndpointSlicePatchTypeOutputWithContext(context.Context) EndpointSlicePatchTypeOutput
}

EndpointSlicePatchTypeInput is an input type that accepts EndpointSlicePatchTypeArgs and EndpointSlicePatchTypeOutput values. You can construct a concrete instance of `EndpointSlicePatchTypeInput` via: 

EndpointSlicePatchTypeArgs{...}

type EndpointSlicePatchTypeOutput 

type EndpointSlicePatchTypeOutput struct{ *pulumi.OutputState }

EndpointSlice represents a subset of the endpoints that implement a service. For a given service there may be multiple EndpointSlice objects, selected by labels, which must be joined to produce the full set of endpoints.

func (EndpointSlicePatchTypeOutput) AddressType 

func (o EndpointSlicePatchTypeOutput) AddressType() pulumi.StringPtrOutput

addressType specifies the type of address carried by this EndpointSlice. All addresses in this slice must be the same type. This field is immutable after creation. The following address types are currently supported: * IPv4: Represents an IPv4 Address. * IPv6: Represents an IPv6 Address. * FQDN: Represents a Fully Qualified Domain Name.

func (EndpointSlicePatchTypeOutput) ApiVersion 

func (o EndpointSlicePatchTypeOutput) ApiVersion() pulumi.StringPtrOutput

APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources

func (EndpointSlicePatchTypeOutput) ElementType 

func (EndpointSlicePatchTypeOutput) ElementType() reflect.Type

func (EndpointSlicePatchTypeOutput) Endpoints 

func (o EndpointSlicePatchTypeOutput) Endpoints() EndpointPatchArrayOutput

endpoints is a list of unique endpoints in this slice. Each slice may include a maximum of 1000 endpoints.

func (EndpointSlicePatchTypeOutput) Kind 

func (o EndpointSlicePatchTypeOutput) Kind() pulumi.StringPtrOutput

Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds

func (EndpointSlicePatchTypeOutput) Metadata 

func (o EndpointSlicePatchTypeOutput) Metadata() metav1.ObjectMetaPatchPtrOutput

Standard object's metadata.

func (EndpointSlicePatchTypeOutput) Ports 

func (o EndpointSlicePatchTypeOutput) Ports() EndpointPortPatchArrayOutput

ports specifies the list of network ports exposed by each endpoint in this slice. Each port must have a unique name. When ports is empty, it indicates that there are no defined ports. When a port is defined with a nil port value, it indicates "all ports". Each slice may include a maximum of 100 ports.

func (EndpointSlicePatchTypeOutput) ToEndpointSlicePatchTypeOutput 

func (o EndpointSlicePatchTypeOutput) ToEndpointSlicePatchTypeOutput() EndpointSlicePatchTypeOutput

func (EndpointSlicePatchTypeOutput) ToEndpointSlicePatchTypeOutputWithContext 

func (o EndpointSlicePatchTypeOutput) ToEndpointSlicePatchTypeOutputWithContext(ctx context.Context) EndpointSlicePatchTypeOutput

type EndpointSliceState 

type EndpointSliceState struct {
}

func (EndpointSliceState) ElementType 

func (EndpointSliceState) ElementType() reflect.Type

type EndpointSliceType 

type EndpointSliceType struct {
	// addressType specifies the type of address carried by this EndpointSlice. All addresses in this slice must be the same type. This field is immutable after creation. The following address types are currently supported: * IPv4: Represents an IPv4 Address. * IPv6: Represents an IPv6 Address. * FQDN: Represents a Fully Qualified Domain Name.
	AddressType string `pulumi:"addressType"`
	// APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
	ApiVersion *string `pulumi:"apiVersion"`
	// endpoints is a list of unique endpoints in this slice. Each slice may include a maximum of 1000 endpoints.
	Endpoints []Endpoint `pulumi:"endpoints"`
	// Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
	Kind *string `pulumi:"kind"`
	// Standard object's metadata.
	Metadata *metav1.ObjectMeta `pulumi:"metadata"`
	// ports specifies the list of network ports exposed by each endpoint in this slice. Each port must have a unique name. When ports is empty, it indicates that there are no defined ports. When a port is defined with a nil port value, it indicates "all ports". Each slice may include a maximum of 100 ports.
	Ports []EndpointPort `pulumi:"ports"`
}

EndpointSlice represents a subset of the endpoints that implement a service. For a given service there may be multiple EndpointSlice objects, selected by labels, which must be joined to produce the full set of endpoints.

type EndpointSliceTypeArgs 

type EndpointSliceTypeArgs struct {
	// addressType specifies the type of address carried by this EndpointSlice. All addresses in this slice must be the same type. This field is immutable after creation. The following address types are currently supported: * IPv4: Represents an IPv4 Address. * IPv6: Represents an IPv6 Address. * FQDN: Represents a Fully Qualified Domain Name.
	AddressType pulumi.StringInput `pulumi:"addressType"`
	// APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
	ApiVersion pulumi.StringPtrInput `pulumi:"apiVersion"`
	// endpoints is a list of unique endpoints in this slice. Each slice may include a maximum of 1000 endpoints.
	Endpoints EndpointArrayInput `pulumi:"endpoints"`
	// Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds
	Kind pulumi.StringPtrInput `pulumi:"kind"`
	// Standard object's metadata.
	Metadata metav1.ObjectMetaPtrInput `pulumi:"metadata"`
	// ports specifies the list of network ports exposed by each endpoint in this slice. Each port must have a unique name. When ports is empty, it indicates that there are no defined ports. When a port is defined with a nil port value, it indicates "all ports". Each slice may include a maximum of 100 ports.
	Ports EndpointPortArrayInput `pulumi:"ports"`
}

EndpointSlice represents a subset of the endpoints that implement a service. For a given service there may be multiple EndpointSlice objects, selected by labels, which must be joined to produce the full set of endpoints.

func (EndpointSliceTypeArgs) ElementType 

func (EndpointSliceTypeArgs) ElementType() reflect.Type

func (EndpointSliceTypeArgs) ToEndpointSliceTypeOutput 

func (i EndpointSliceTypeArgs) ToEndpointSliceTypeOutput() EndpointSliceTypeOutput

func (EndpointSliceTypeArgs) ToEndpointSliceTypeOutputWithContext 

func (i EndpointSliceTypeArgs) ToEndpointSliceTypeOutputWithContext(ctx context.Context) EndpointSliceTypeOutput

type EndpointSliceTypeArray 

type EndpointSliceTypeArray []EndpointSliceTypeInput

func (EndpointSliceTypeArray) ElementType 

func (EndpointSliceTypeArray) ElementType() reflect.Type

func (EndpointSliceTypeArray) ToEndpointSliceTypeArrayOutput 

func (i EndpointSliceTypeArray) ToEndpointSliceTypeArrayOutput() EndpointSliceTypeArrayOutput

func (EndpointSliceTypeArray) ToEndpointSliceTypeArrayOutputWithContext 

func (i EndpointSliceTypeArray) ToEndpointSliceTypeArrayOutputWithContext(ctx context.Context) EndpointSliceTypeArrayOutput

type EndpointSliceTypeArrayInput 

type EndpointSliceTypeArrayInput interface {
	pulumi.Input

	ToEndpointSliceTypeArrayOutput() EndpointSliceTypeArrayOutput
	ToEndpointSliceTypeArrayOutputWithContext(context.Context) EndpointSliceTypeArrayOutput
}

EndpointSliceTypeArrayInput is an input type that accepts EndpointSliceTypeArray and EndpointSliceTypeArrayOutput values. You can construct a concrete instance of `EndpointSliceTypeArrayInput` via: 

EndpointSliceTypeArray{ EndpointSliceTypeArgs{...} }

type EndpointSliceTypeArrayOutput 

type EndpointSliceTypeArrayOutput struct{ *pulumi.OutputState }

func (EndpointSliceTypeArrayOutput) ElementType 

func (EndpointSliceTypeArrayOutput) ElementType() reflect.Type

func (EndpointSliceTypeArrayOutput) Index 

func (o EndpointSliceTypeArrayOutput) Index(i pulumi.IntInput) EndpointSliceTypeOutput

func (EndpointSliceTypeArrayOutput) ToEndpointSliceTypeArrayOutput 

func (o EndpointSliceTypeArrayOutput) ToEndpointSliceTypeArrayOutput() EndpointSliceTypeArrayOutput

func (EndpointSliceTypeArrayOutput) ToEndpointSliceTypeArrayOutputWithContext 

func (o EndpointSliceTypeArrayOutput) ToEndpointSliceTypeArrayOutputWithContext(ctx context.Context) EndpointSliceTypeArrayOutput

type EndpointSliceTypeInput 

type EndpointSliceTypeInput interface {
	pulumi.Input

	ToEndpointSliceTypeOutput() EndpointSliceTypeOutput
	ToEndpointSliceTypeOutputWithContext(context.Context) EndpointSliceTypeOutput
}

EndpointSliceTypeInput is an input type that accepts EndpointSliceTypeArgs and EndpointSliceTypeOutput values. You can construct a concrete instance of `EndpointSliceTypeInput` via: 

EndpointSliceTypeArgs{...}

type EndpointSliceTypeOutput 

type EndpointSliceTypeOutput struct{ *pulumi.OutputState }

EndpointSlice represents a subset of the endpoints that implement a service. For a given service there may be multiple EndpointSlice objects, selected by labels, which must be joined to produce the full set of endpoints.

func (EndpointSliceTypeOutput) AddressType 

func (o EndpointSliceTypeOutput) AddressType() pulumi.StringOutput

addressType specifies the type of address carried by this EndpointSlice. All addresses in this slice must be the same type. This field is immutable after creation. The following address types are currently supported: * IPv4: Represents an IPv4 Address. * IPv6: Represents an IPv6 Address. * FQDN: Represents a Fully Qualified Domain Name.

func (EndpointSliceTypeOutput) ApiVersion 

func (o EndpointSliceTypeOutput) ApiVersion() pulumi.StringPtrOutput

APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources

func (EndpointSliceTypeOutput) ElementType 

func (EndpointSliceTypeOutput) ElementType() reflect.Type

func (EndpointSliceTypeOutput) Endpoints 

func (o EndpointSliceTypeOutput) Endpoints() EndpointArrayOutput

endpoints is a list of unique endpoints in this slice. Each slice may include a maximum of 1000 endpoints.

func (EndpointSliceTypeOutput) Kind 

func (o EndpointSliceTypeOutput) Kind() pulumi.StringPtrOutput

Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds

func (EndpointSliceTypeOutput) Metadata 

func (o EndpointSliceTypeOutput) Metadata() metav1.ObjectMetaPtrOutput

Standard object's metadata.

func (EndpointSliceTypeOutput) Ports 

func (o EndpointSliceTypeOutput) Ports() EndpointPortArrayOutput

ports specifies the list of network ports exposed by each endpoint in this slice. Each port must have a unique name. When ports is empty, it indicates that there are no defined ports. When a port is defined with a nil port value, it indicates "all ports". Each slice may include a maximum of 100 ports.

func (EndpointSliceTypeOutput) ToEndpointSliceTypeOutput 

func (o EndpointSliceTypeOutput) ToEndpointSliceTypeOutput() EndpointSliceTypeOutput

func (EndpointSliceTypeOutput) ToEndpointSliceTypeOutputWithContext 

func (o EndpointSliceTypeOutput) ToEndpointSliceTypeOutputWithContext(ctx context.Context) EndpointSliceTypeOutput

type ForZone 

type ForZone struct {
	// name represents the name of the zone.
	Name string `pulumi:"name"`
}

ForZone provides information about which zones should consume this endpoint.

type ForZoneArgs 

type ForZoneArgs struct {
	// name represents the name of the zone.
	Name pulumi.StringInput `pulumi:"name"`
}

ForZone provides information about which zones should consume this endpoint.

func (ForZoneArgs) ElementType 

func (ForZoneArgs) ElementType() reflect.Type

func (ForZoneArgs) ToForZoneOutput 

func (i ForZoneArgs) ToForZoneOutput() ForZoneOutput

func (ForZoneArgs) ToForZoneOutputWithContext 

func (i ForZoneArgs) ToForZoneOutputWithContext(ctx context.Context) ForZoneOutput

type ForZoneArray 

type ForZoneArray []ForZoneInput

func (ForZoneArray) ElementType 

func (ForZoneArray) ElementType() reflect.Type

func (ForZoneArray) ToForZoneArrayOutput 

func (i ForZoneArray) ToForZoneArrayOutput() ForZoneArrayOutput

func (ForZoneArray) ToForZoneArrayOutputWithContext 

func (i ForZoneArray) ToForZoneArrayOutputWithContext(ctx context.Context) ForZoneArrayOutput

type ForZoneArrayInput 

type ForZoneArrayInput interface {
	pulumi.Input

	ToForZoneArrayOutput() ForZoneArrayOutput
	ToForZoneArrayOutputWithContext(context.Context) ForZoneArrayOutput
}

ForZoneArrayInput is an input type that accepts ForZoneArray and ForZoneArrayOutput values. You can construct a concrete instance of `ForZoneArrayInput` via: 

ForZoneArray{ ForZoneArgs{...} }

type ForZoneArrayOutput 

type ForZoneArrayOutput struct{ *pulumi.OutputState }

func (ForZoneArrayOutput) ElementType 

func (ForZoneArrayOutput) ElementType() reflect.Type

func (ForZoneArrayOutput) Index 

func (o ForZoneArrayOutput) Index(i pulumi.IntInput) ForZoneOutput

func (ForZoneArrayOutput) ToForZoneArrayOutput 

func (o ForZoneArrayOutput) ToForZoneArrayOutput() ForZoneArrayOutput

func (ForZoneArrayOutput) ToForZoneArrayOutputWithContext 

func (o ForZoneArrayOutput) ToForZoneArrayOutputWithContext(ctx context.Context) ForZoneArrayOutput

type ForZoneInput 

type ForZoneInput interface {
	pulumi.Input

	ToForZoneOutput() ForZoneOutput
	ToForZoneOutputWithContext(context.Context) ForZoneOutput
}

ForZoneInput is an input type that accepts ForZoneArgs and ForZoneOutput values. You can construct a concrete instance of `ForZoneInput` via: 

ForZoneArgs{...}

type ForZoneOutput 

type ForZoneOutput struct{ *pulumi.OutputState }

ForZone provides information about which zones should consume this endpoint.

func (ForZoneOutput) ElementType 

func (ForZoneOutput) ElementType() reflect.Type

func (ForZoneOutput) Name 

func (o ForZoneOutput) Name() pulumi.StringOutput

name represents the name of the zone.

func (ForZoneOutput) ToForZoneOutput 

func (o ForZoneOutput) ToForZoneOutput() ForZoneOutput

func (ForZoneOutput) ToForZoneOutputWithContext 

func (o ForZoneOutput) ToForZoneOutputWithContext(ctx context.Context) ForZoneOutput

type ForZonePatch 

type ForZonePatch struct {
	// name represents the name of the zone.
	Name *string `pulumi:"name"`
}

ForZone provides information about which zones should consume this endpoint.

type ForZonePatchArgs 

type ForZonePatchArgs struct {
	// name represents the name of the zone.
	Name pulumi.StringPtrInput `pulumi:"name"`
}

ForZone provides information about which zones should consume this endpoint.

func (ForZonePatchArgs) ElementType 

func (ForZonePatchArgs) ElementType() reflect.Type

func (ForZonePatchArgs) ToForZonePatchOutput 

func (i ForZonePatchArgs) ToForZonePatchOutput() ForZonePatchOutput

func (ForZonePatchArgs) ToForZonePatchOutputWithContext 

func (i ForZonePatchArgs) ToForZonePatchOutputWithContext(ctx context.Context) ForZonePatchOutput

type ForZonePatchArray 

type ForZonePatchArray []ForZonePatchInput

func (ForZonePatchArray) ElementType 

func (ForZonePatchArray) ElementType() reflect.Type

func (ForZonePatchArray) ToForZonePatchArrayOutput 

func (i ForZonePatchArray) ToForZonePatchArrayOutput() ForZonePatchArrayOutput

func (ForZonePatchArray) ToForZonePatchArrayOutputWithContext 

func (i ForZonePatchArray) ToForZonePatchArrayOutputWithContext(ctx context.Context) ForZonePatchArrayOutput

type ForZonePatchArrayInput 

type ForZonePatchArrayInput interface {
	pulumi.Input

	ToForZonePatchArrayOutput() ForZonePatchArrayOutput
	ToForZonePatchArrayOutputWithContext(context.Context) ForZonePatchArrayOutput
}

ForZonePatchArrayInput is an input type that accepts ForZonePatchArray and ForZonePatchArrayOutput values. You can construct a concrete instance of `ForZonePatchArrayInput` via: 

ForZonePatchArray{ ForZonePatchArgs{...} }

type ForZonePatchArrayOutput 

type ForZonePatchArrayOutput struct{ *pulumi.OutputState }

func (ForZonePatchArrayOutput) ElementType 

func (ForZonePatchArrayOutput) ElementType() reflect.Type

func (ForZonePatchArrayOutput) Index 

func (o ForZonePatchArrayOutput) Index(i pulumi.IntInput) ForZonePatchOutput

func (ForZonePatchArrayOutput) ToForZonePatchArrayOutput 

func (o ForZonePatchArrayOutput) ToForZonePatchArrayOutput() ForZonePatchArrayOutput

func (ForZonePatchArrayOutput) ToForZonePatchArrayOutputWithContext 

func (o ForZonePatchArrayOutput) ToForZonePatchArrayOutputWithContext(ctx context.Context) ForZonePatchArrayOutput

type ForZonePatchInput 

type ForZonePatchInput interface {
	pulumi.Input

	ToForZonePatchOutput() ForZonePatchOutput
	ToForZonePatchOutputWithContext(context.Context) ForZonePatchOutput
}

ForZonePatchInput is an input type that accepts ForZonePatchArgs and ForZonePatchOutput values. You can construct a concrete instance of `ForZonePatchInput` via: 

ForZonePatchArgs{...}

type ForZonePatchOutput 

type ForZonePatchOutput struct{ *pulumi.OutputState }

ForZone provides information about which zones should consume this endpoint.

func (ForZonePatchOutput) ElementType 

func (ForZonePatchOutput) ElementType() reflect.Type

func (ForZonePatchOutput) Name 

func (o ForZonePatchOutput) Name() pulumi.StringPtrOutput

name represents the name of the zone.

func (ForZonePatchOutput) ToForZonePatchOutput 

func (o ForZonePatchOutput) ToForZonePatchOutput() ForZonePatchOutput

func (ForZonePatchOutput) ToForZonePatchOutputWithContext 

func (o ForZonePatchOutput) ToForZonePatchOutputWithContext(ctx context.Context) ForZonePatchOutput

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.