saml

package
v5.4.0 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Dec 9, 2024 License: Apache-2.0 Imports: 7 Imported by: 0

Documentation

Index

Constants

This section is empty.

Variables

This section is empty.

Functions

This section is empty.

Types

type Client 

type Client struct {
	pulumi.CustomResourceState

	// SAML POST Binding URL for the client's assertion consumer service (login responses).
	AssertionConsumerPostUrl pulumi.StringPtrOutput `pulumi:"assertionConsumerPostUrl"`
	// SAML Redirect Binding URL for the client's assertion consumer service (login responses).
	AssertionConsumerRedirectUrl pulumi.StringPtrOutput `pulumi:"assertionConsumerRedirectUrl"`
	// Override realm authentication flow bindings
	AuthenticationFlowBindingOverrides ClientAuthenticationFlowBindingOverridesPtrOutput `pulumi:"authenticationFlowBindingOverrides"`
	// When specified, this URL will be used whenever Keycloak needs to link to this client.
	BaseUrl pulumi.StringPtrOutput `pulumi:"baseUrl"`
	// The Canonicalization Method for XML signatures. Should be one of "EXCLUSIVE", "EXCLUSIVE_WITH_COMMENTS", "INCLUSIVE", or "INCLUSIVE_WITH_COMMENTS". Defaults to "EXCLUSIVE".
	CanonicalizationMethod pulumi.StringPtrOutput `pulumi:"canonicalizationMethod"`
	// The unique ID of this client, referenced in the URI during authentication and in issued tokens.
	ClientId pulumi.StringOutput `pulumi:"clientId"`
	// When `true`, Keycloak will expect that documents originating from a client will be signed using the certificate and/or key configured via `signingCertificate` and `signingPrivateKey`. Defaults to `true`.
	ClientSignatureRequired pulumi.BoolPtrOutput `pulumi:"clientSignatureRequired"`
	// The description of this client in the GUI.
	Description pulumi.StringPtrOutput `pulumi:"description"`
	// When false, this client will not be able to initiate a login or obtain access tokens. Defaults to `true`.
	Enabled pulumi.BoolPtrOutput `pulumi:"enabled"`
	// When `true`, the SAML assertions will be encrypted by Keycloak using the client's public key. Defaults to `false`.
	EncryptAssertions pulumi.BoolPtrOutput `pulumi:"encryptAssertions"`
	// If assertions for the client are encrypted, this certificate will be used for encryption.
	EncryptionCertificate pulumi.StringOutput `pulumi:"encryptionCertificate"`
	// (Computed) The sha1sum fingerprint of the encryption certificate. If the encryption certificate is not in correct base64 format, this will be left empty.
	EncryptionCertificateSha1 pulumi.StringOutput    `pulumi:"encryptionCertificateSha1"`
	ExtraConfig               pulumi.StringMapOutput `pulumi:"extraConfig"`
	// Ignore requested NameID subject format and use the one defined in `nameIdFormat` instead. Defaults to `false`.
	ForceNameIdFormat pulumi.BoolPtrOutput `pulumi:"forceNameIdFormat"`
	// When `true`, Keycloak will always respond to an authentication request via the SAML POST Binding. Defaults to `true`.
	ForcePostBinding pulumi.BoolPtrOutput `pulumi:"forcePostBinding"`
	// When `true`, this client will require a browser redirect in order to perform a logout. Defaults to `true`.
	FrontChannelLogout pulumi.BoolPtrOutput `pulumi:"frontChannelLogout"`
	// Allow to include all roles mappings in the access token
	FullScopeAllowed pulumi.BoolPtrOutput `pulumi:"fullScopeAllowed"`
	// Relay state you want to send with SAML request when you want to do IDP Initiated SSO.
	IdpInitiatedSsoRelayState pulumi.StringPtrOutput `pulumi:"idpInitiatedSsoRelayState"`
	// URL fragment name to reference client when you want to do IDP Initiated SSO.
	IdpInitiatedSsoUrlName pulumi.StringPtrOutput `pulumi:"idpInitiatedSsoUrlName"`
	// When `true`, an `AuthnStatement` will be included in the SAML response. Defaults to `true`.
	IncludeAuthnStatement pulumi.BoolPtrOutput `pulumi:"includeAuthnStatement"`
	// The login theme of this client.
	LoginTheme pulumi.StringPtrOutput `pulumi:"loginTheme"`
	// SAML POST Binding URL for the client's single logout service.
	LogoutServicePostBindingUrl pulumi.StringPtrOutput `pulumi:"logoutServicePostBindingUrl"`
	// SAML Redirect Binding URL for the client's single logout service.
	LogoutServiceRedirectBindingUrl pulumi.StringPtrOutput `pulumi:"logoutServiceRedirectBindingUrl"`
	// When specified, this URL will be used for all SAML requests.
	MasterSamlProcessingUrl pulumi.StringPtrOutput `pulumi:"masterSamlProcessingUrl"`
	// The display name of this client in the GUI.
	Name pulumi.StringOutput `pulumi:"name"`
	// Sets the Name ID format for the subject.
	NameIdFormat pulumi.StringOutput `pulumi:"nameIdFormat"`
	// The realm this client is attached to.
	RealmId pulumi.StringOutput `pulumi:"realmId"`
	// When specified, this value is prepended to all relative URLs.
	RootUrl pulumi.StringPtrOutput `pulumi:"rootUrl"`
	// When `true`, the SAML assertions will be signed by Keycloak using the realm's private key, and embedded within the SAML XML Auth response. Defaults to `false`.
	SignAssertions pulumi.BoolPtrOutput `pulumi:"signAssertions"`
	// When `true`, the SAML document will be signed by Keycloak using the realm's private key. Defaults to `true`.
	SignDocuments pulumi.BoolPtrOutput `pulumi:"signDocuments"`
	// The signature algorithm used to sign documents. Should be one of "RSA_SHA1", "RSA_SHA256", "RSA_SHA256_MGF1, "RSA_SHA512", "RSA_SHA512_MGF1" or "DSA_SHA1".
	SignatureAlgorithm pulumi.StringPtrOutput `pulumi:"signatureAlgorithm"`
	// The value of the `KeyName` element within the signed SAML document. Should be one of "NONE", "KEY_ID", or "CERT_SUBJECT". Defaults to "KEY_ID".
	SignatureKeyName pulumi.StringPtrOutput `pulumi:"signatureKeyName"`
	// If documents or assertions from the client are signed, this certificate will be used to verify the signature.
	SigningCertificate pulumi.StringOutput `pulumi:"signingCertificate"`
	// (Computed) The sha1sum fingerprint of the signing certificate. If the signing certificate is not in correct base64 format, this will be left empty.
	SigningCertificateSha1 pulumi.StringOutput `pulumi:"signingCertificateSha1"`
	// If documents or assertions from the client are signed, this private key will be used to verify the signature.
	SigningPrivateKey pulumi.StringOutput `pulumi:"signingPrivateKey"`
	// (Computed) The sha1sum fingerprint of the signing private key. If the signing private key is not in correct base64 format, this will be left empty.
	SigningPrivateKeySha1 pulumi.StringOutput `pulumi:"signingPrivateKeySha1"`
	// When specified, Keycloak will use this list to validate given Assertion Consumer URLs specified in the authentication request.
	ValidRedirectUris pulumi.StringArrayOutput `pulumi:"validRedirectUris"`
}

Allows for creating and managing Keycloak clients that use the SAML protocol.

Clients are entities that can use Keycloak for user authentication. Typically, clients are applications that redirect users to Keycloak for authentication in order to take advantage of Keycloak's user sessions for SSO.

## Import

Clients can be imported using the format `{{realm_id}}/{{client_keycloak_id}}`, where `client_keycloak_id` is the unique ID that Keycloak

assigns to the client upon creation. This value can be found in the URI when editing this client in the GUI, and is typically a GUID.

Example:

bash

```sh $ pulumi import keycloak:saml/client:Client saml_client my-realm/dcbc4c73-e478-4928-ae2e-d5e420223352 ```

func GetClient 

func GetClient(ctx *pulumi.Context,
	name string, id pulumi.IDInput, state *ClientState, opts ...pulumi.ResourceOption) (*Client, error)

GetClient gets an existing Client resource's state with the given name, ID, and optional state properties that are used to uniquely qualify the lookup (nil if not required).

func NewClient 

func NewClient(ctx *pulumi.Context,
	name string, args *ClientArgs, opts ...pulumi.ResourceOption) (*Client, error)

NewClient registers a new resource with the given unique name, arguments, and options.

func (*Client) ElementType 

func (*Client) ElementType() reflect.Type

func (*Client) ToClientOutput 

func (i *Client) ToClientOutput() ClientOutput

func (*Client) ToClientOutputWithContext 

func (i *Client) ToClientOutputWithContext(ctx context.Context) ClientOutput

type ClientArgs 

type ClientArgs struct {
	// SAML POST Binding URL for the client's assertion consumer service (login responses).
	AssertionConsumerPostUrl pulumi.StringPtrInput
	// SAML Redirect Binding URL for the client's assertion consumer service (login responses).
	AssertionConsumerRedirectUrl pulumi.StringPtrInput
	// Override realm authentication flow bindings
	AuthenticationFlowBindingOverrides ClientAuthenticationFlowBindingOverridesPtrInput
	// When specified, this URL will be used whenever Keycloak needs to link to this client.
	BaseUrl pulumi.StringPtrInput
	// The Canonicalization Method for XML signatures. Should be one of "EXCLUSIVE", "EXCLUSIVE_WITH_COMMENTS", "INCLUSIVE", or "INCLUSIVE_WITH_COMMENTS". Defaults to "EXCLUSIVE".
	CanonicalizationMethod pulumi.StringPtrInput
	// The unique ID of this client, referenced in the URI during authentication and in issued tokens.
	ClientId pulumi.StringInput
	// When `true`, Keycloak will expect that documents originating from a client will be signed using the certificate and/or key configured via `signingCertificate` and `signingPrivateKey`. Defaults to `true`.
	ClientSignatureRequired pulumi.BoolPtrInput
	// The description of this client in the GUI.
	Description pulumi.StringPtrInput
	// When false, this client will not be able to initiate a login or obtain access tokens. Defaults to `true`.
	Enabled pulumi.BoolPtrInput
	// When `true`, the SAML assertions will be encrypted by Keycloak using the client's public key. Defaults to `false`.
	EncryptAssertions pulumi.BoolPtrInput
	// If assertions for the client are encrypted, this certificate will be used for encryption.
	EncryptionCertificate pulumi.StringPtrInput
	ExtraConfig           pulumi.StringMapInput
	// Ignore requested NameID subject format and use the one defined in `nameIdFormat` instead. Defaults to `false`.
	ForceNameIdFormat pulumi.BoolPtrInput
	// When `true`, Keycloak will always respond to an authentication request via the SAML POST Binding. Defaults to `true`.
	ForcePostBinding pulumi.BoolPtrInput
	// When `true`, this client will require a browser redirect in order to perform a logout. Defaults to `true`.
	FrontChannelLogout pulumi.BoolPtrInput
	// Allow to include all roles mappings in the access token
	FullScopeAllowed pulumi.BoolPtrInput
	// Relay state you want to send with SAML request when you want to do IDP Initiated SSO.
	IdpInitiatedSsoRelayState pulumi.StringPtrInput
	// URL fragment name to reference client when you want to do IDP Initiated SSO.
	IdpInitiatedSsoUrlName pulumi.StringPtrInput
	// When `true`, an `AuthnStatement` will be included in the SAML response. Defaults to `true`.
	IncludeAuthnStatement pulumi.BoolPtrInput
	// The login theme of this client.
	LoginTheme pulumi.StringPtrInput
	// SAML POST Binding URL for the client's single logout service.
	LogoutServicePostBindingUrl pulumi.StringPtrInput
	// SAML Redirect Binding URL for the client's single logout service.
	LogoutServiceRedirectBindingUrl pulumi.StringPtrInput
	// When specified, this URL will be used for all SAML requests.
	MasterSamlProcessingUrl pulumi.StringPtrInput
	// The display name of this client in the GUI.
	Name pulumi.StringPtrInput
	// Sets the Name ID format for the subject.
	NameIdFormat pulumi.StringPtrInput
	// The realm this client is attached to.
	RealmId pulumi.StringInput
	// When specified, this value is prepended to all relative URLs.
	RootUrl pulumi.StringPtrInput
	// When `true`, the SAML assertions will be signed by Keycloak using the realm's private key, and embedded within the SAML XML Auth response. Defaults to `false`.
	SignAssertions pulumi.BoolPtrInput
	// When `true`, the SAML document will be signed by Keycloak using the realm's private key. Defaults to `true`.
	SignDocuments pulumi.BoolPtrInput
	// The signature algorithm used to sign documents. Should be one of "RSA_SHA1", "RSA_SHA256", "RSA_SHA256_MGF1, "RSA_SHA512", "RSA_SHA512_MGF1" or "DSA_SHA1".
	SignatureAlgorithm pulumi.StringPtrInput
	// The value of the `KeyName` element within the signed SAML document. Should be one of "NONE", "KEY_ID", or "CERT_SUBJECT". Defaults to "KEY_ID".
	SignatureKeyName pulumi.StringPtrInput
	// If documents or assertions from the client are signed, this certificate will be used to verify the signature.
	SigningCertificate pulumi.StringPtrInput
	// If documents or assertions from the client are signed, this private key will be used to verify the signature.
	SigningPrivateKey pulumi.StringPtrInput
	// When specified, Keycloak will use this list to validate given Assertion Consumer URLs specified in the authentication request.
	ValidRedirectUris pulumi.StringArrayInput
}

The set of arguments for constructing a Client resource.

func (ClientArgs) ElementType 

func (ClientArgs) ElementType() reflect.Type

type ClientArray 

type ClientArray []ClientInput

func (ClientArray) ElementType 

func (ClientArray) ElementType() reflect.Type

func (ClientArray) ToClientArrayOutput 

func (i ClientArray) ToClientArrayOutput() ClientArrayOutput

func (ClientArray) ToClientArrayOutputWithContext 

func (i ClientArray) ToClientArrayOutputWithContext(ctx context.Context) ClientArrayOutput

type ClientArrayInput 

type ClientArrayInput interface {
	pulumi.Input

	ToClientArrayOutput() ClientArrayOutput
	ToClientArrayOutputWithContext(context.Context) ClientArrayOutput
}

ClientArrayInput is an input type that accepts ClientArray and ClientArrayOutput values. You can construct a concrete instance of `ClientArrayInput` via: 

ClientArray{ ClientArgs{...} }

type ClientArrayOutput 

type ClientArrayOutput struct{ *pulumi.OutputState }

func (ClientArrayOutput) ElementType 

func (ClientArrayOutput) ElementType() reflect.Type

func (ClientArrayOutput) Index 

func (o ClientArrayOutput) Index(i pulumi.IntInput) ClientOutput

func (ClientArrayOutput) ToClientArrayOutput 

func (o ClientArrayOutput) ToClientArrayOutput() ClientArrayOutput

func (ClientArrayOutput) ToClientArrayOutputWithContext 

func (o ClientArrayOutput) ToClientArrayOutputWithContext(ctx context.Context) ClientArrayOutput

type ClientAuthenticationFlowBindingOverrides 

type ClientAuthenticationFlowBindingOverrides struct {
	// Browser flow id, (flow needs to exist)
	BrowserId *string `pulumi:"browserId"`
	// Direct grant flow id (flow needs to exist)
	DirectGrantId *string `pulumi:"directGrantId"`
}

type ClientAuthenticationFlowBindingOverridesArgs 

type ClientAuthenticationFlowBindingOverridesArgs struct {
	// Browser flow id, (flow needs to exist)
	BrowserId pulumi.StringPtrInput `pulumi:"browserId"`
	// Direct grant flow id (flow needs to exist)
	DirectGrantId pulumi.StringPtrInput `pulumi:"directGrantId"`
}

func (ClientAuthenticationFlowBindingOverridesArgs) ElementType 

func (ClientAuthenticationFlowBindingOverridesArgs) ElementType() reflect.Type

func (ClientAuthenticationFlowBindingOverridesArgs) ToClientAuthenticationFlowBindingOverridesOutput 

func (i ClientAuthenticationFlowBindingOverridesArgs) ToClientAuthenticationFlowBindingOverridesOutput() ClientAuthenticationFlowBindingOverridesOutput

func (ClientAuthenticationFlowBindingOverridesArgs) ToClientAuthenticationFlowBindingOverridesOutputWithContext 

func (i ClientAuthenticationFlowBindingOverridesArgs) ToClientAuthenticationFlowBindingOverridesOutputWithContext(ctx context.Context) ClientAuthenticationFlowBindingOverridesOutput

func (ClientAuthenticationFlowBindingOverridesArgs) ToClientAuthenticationFlowBindingOverridesPtrOutput 

func (i ClientAuthenticationFlowBindingOverridesArgs) ToClientAuthenticationFlowBindingOverridesPtrOutput() ClientAuthenticationFlowBindingOverridesPtrOutput

func (ClientAuthenticationFlowBindingOverridesArgs) ToClientAuthenticationFlowBindingOverridesPtrOutputWithContext 

func (i ClientAuthenticationFlowBindingOverridesArgs) ToClientAuthenticationFlowBindingOverridesPtrOutputWithContext(ctx context.Context) ClientAuthenticationFlowBindingOverridesPtrOutput

type ClientAuthenticationFlowBindingOverridesInput 

type ClientAuthenticationFlowBindingOverridesInput interface {
	pulumi.Input

	ToClientAuthenticationFlowBindingOverridesOutput() ClientAuthenticationFlowBindingOverridesOutput
	ToClientAuthenticationFlowBindingOverridesOutputWithContext(context.Context) ClientAuthenticationFlowBindingOverridesOutput
}

ClientAuthenticationFlowBindingOverridesInput is an input type that accepts ClientAuthenticationFlowBindingOverridesArgs and ClientAuthenticationFlowBindingOverridesOutput values. You can construct a concrete instance of `ClientAuthenticationFlowBindingOverridesInput` via: 

ClientAuthenticationFlowBindingOverridesArgs{...}

type ClientAuthenticationFlowBindingOverridesOutput 

type ClientAuthenticationFlowBindingOverridesOutput struct{ *pulumi.OutputState }

func (ClientAuthenticationFlowBindingOverridesOutput) BrowserId 

func (o ClientAuthenticationFlowBindingOverridesOutput) BrowserId() pulumi.StringPtrOutput

Browser flow id, (flow needs to exist)

func (ClientAuthenticationFlowBindingOverridesOutput) DirectGrantId 

func (o ClientAuthenticationFlowBindingOverridesOutput) DirectGrantId() pulumi.StringPtrOutput

Direct grant flow id (flow needs to exist)

func (ClientAuthenticationFlowBindingOverridesOutput) ElementType 

func (ClientAuthenticationFlowBindingOverridesOutput) ElementType() reflect.Type

func (ClientAuthenticationFlowBindingOverridesOutput) ToClientAuthenticationFlowBindingOverridesOutput 

func (o ClientAuthenticationFlowBindingOverridesOutput) ToClientAuthenticationFlowBindingOverridesOutput() ClientAuthenticationFlowBindingOverridesOutput

func (ClientAuthenticationFlowBindingOverridesOutput) ToClientAuthenticationFlowBindingOverridesOutputWithContext 

func (o ClientAuthenticationFlowBindingOverridesOutput) ToClientAuthenticationFlowBindingOverridesOutputWithContext(ctx context.Context) ClientAuthenticationFlowBindingOverridesOutput

func (ClientAuthenticationFlowBindingOverridesOutput) ToClientAuthenticationFlowBindingOverridesPtrOutput 

func (o ClientAuthenticationFlowBindingOverridesOutput) ToClientAuthenticationFlowBindingOverridesPtrOutput() ClientAuthenticationFlowBindingOverridesPtrOutput

func (ClientAuthenticationFlowBindingOverridesOutput) ToClientAuthenticationFlowBindingOverridesPtrOutputWithContext 

func (o ClientAuthenticationFlowBindingOverridesOutput) ToClientAuthenticationFlowBindingOverridesPtrOutputWithContext(ctx context.Context) ClientAuthenticationFlowBindingOverridesPtrOutput

type ClientAuthenticationFlowBindingOverridesPtrInput 

type ClientAuthenticationFlowBindingOverridesPtrInput interface {
	pulumi.Input

	ToClientAuthenticationFlowBindingOverridesPtrOutput() ClientAuthenticationFlowBindingOverridesPtrOutput
	ToClientAuthenticationFlowBindingOverridesPtrOutputWithContext(context.Context) ClientAuthenticationFlowBindingOverridesPtrOutput
}

ClientAuthenticationFlowBindingOverridesPtrInput is an input type that accepts ClientAuthenticationFlowBindingOverridesArgs, ClientAuthenticationFlowBindingOverridesPtr and ClientAuthenticationFlowBindingOverridesPtrOutput values. You can construct a concrete instance of `ClientAuthenticationFlowBindingOverridesPtrInput` via: 

        ClientAuthenticationFlowBindingOverridesArgs{...}

or:

        nil

func ClientAuthenticationFlowBindingOverridesPtr 

func ClientAuthenticationFlowBindingOverridesPtr(v *ClientAuthenticationFlowBindingOverridesArgs) ClientAuthenticationFlowBindingOverridesPtrInput

type ClientAuthenticationFlowBindingOverridesPtrOutput 

type ClientAuthenticationFlowBindingOverridesPtrOutput struct{ *pulumi.OutputState }

func (ClientAuthenticationFlowBindingOverridesPtrOutput) BrowserId 

func (o ClientAuthenticationFlowBindingOverridesPtrOutput) BrowserId() pulumi.StringPtrOutput

Browser flow id, (flow needs to exist)

func (ClientAuthenticationFlowBindingOverridesPtrOutput) DirectGrantId 

func (o ClientAuthenticationFlowBindingOverridesPtrOutput) DirectGrantId() pulumi.StringPtrOutput

Direct grant flow id (flow needs to exist)

func (ClientAuthenticationFlowBindingOverridesPtrOutput) Elem 

func (o ClientAuthenticationFlowBindingOverridesPtrOutput) Elem() ClientAuthenticationFlowBindingOverridesOutput

func (ClientAuthenticationFlowBindingOverridesPtrOutput) ElementType 

func (ClientAuthenticationFlowBindingOverridesPtrOutput) ElementType() reflect.Type

func (ClientAuthenticationFlowBindingOverridesPtrOutput) ToClientAuthenticationFlowBindingOverridesPtrOutput 

func (o ClientAuthenticationFlowBindingOverridesPtrOutput) ToClientAuthenticationFlowBindingOverridesPtrOutput() ClientAuthenticationFlowBindingOverridesPtrOutput

func (ClientAuthenticationFlowBindingOverridesPtrOutput) ToClientAuthenticationFlowBindingOverridesPtrOutputWithContext 

func (o ClientAuthenticationFlowBindingOverridesPtrOutput) ToClientAuthenticationFlowBindingOverridesPtrOutputWithContext(ctx context.Context) ClientAuthenticationFlowBindingOverridesPtrOutput

type ClientDefaultScope 

type ClientDefaultScope struct {
	pulumi.CustomResourceState

	// The ID of the client to attach default scopes to. Note that this is the unique ID of the client generated by Keycloak.
	ClientId pulumi.StringOutput `pulumi:"clientId"`
	// An array of client scope names to attach to this client.
	DefaultScopes pulumi.StringArrayOutput `pulumi:"defaultScopes"`
	// The realm this client and scopes exists in.
	RealmId pulumi.StringOutput `pulumi:"realmId"`
}

## Example Usage

func GetClientDefaultScope 

func GetClientDefaultScope(ctx *pulumi.Context,
	name string, id pulumi.IDInput, state *ClientDefaultScopeState, opts ...pulumi.ResourceOption) (*ClientDefaultScope, error)

GetClientDefaultScope gets an existing ClientDefaultScope resource's state with the given name, ID, and optional state properties that are used to uniquely qualify the lookup (nil if not required).

func NewClientDefaultScope 

func NewClientDefaultScope(ctx *pulumi.Context,
	name string, args *ClientDefaultScopeArgs, opts ...pulumi.ResourceOption) (*ClientDefaultScope, error)

NewClientDefaultScope registers a new resource with the given unique name, arguments, and options.

func (*ClientDefaultScope) ElementType 

func (*ClientDefaultScope) ElementType() reflect.Type

func (*ClientDefaultScope) ToClientDefaultScopeOutput 

func (i *ClientDefaultScope) ToClientDefaultScopeOutput() ClientDefaultScopeOutput

func (*ClientDefaultScope) ToClientDefaultScopeOutputWithContext 

func (i *ClientDefaultScope) ToClientDefaultScopeOutputWithContext(ctx context.Context) ClientDefaultScopeOutput

type ClientDefaultScopeArgs 

type ClientDefaultScopeArgs struct {
	// The ID of the client to attach default scopes to. Note that this is the unique ID of the client generated by Keycloak.
	ClientId pulumi.StringInput
	// An array of client scope names to attach to this client.
	DefaultScopes pulumi.StringArrayInput
	// The realm this client and scopes exists in.
	RealmId pulumi.StringInput
}

The set of arguments for constructing a ClientDefaultScope resource.

func (ClientDefaultScopeArgs) ElementType 

func (ClientDefaultScopeArgs) ElementType() reflect.Type

type ClientDefaultScopeArray 

type ClientDefaultScopeArray []ClientDefaultScopeInput

func (ClientDefaultScopeArray) ElementType 

func (ClientDefaultScopeArray) ElementType() reflect.Type

func (ClientDefaultScopeArray) ToClientDefaultScopeArrayOutput 

func (i ClientDefaultScopeArray) ToClientDefaultScopeArrayOutput() ClientDefaultScopeArrayOutput

func (ClientDefaultScopeArray) ToClientDefaultScopeArrayOutputWithContext 

func (i ClientDefaultScopeArray) ToClientDefaultScopeArrayOutputWithContext(ctx context.Context) ClientDefaultScopeArrayOutput

type ClientDefaultScopeArrayInput 

type ClientDefaultScopeArrayInput interface {
	pulumi.Input

	ToClientDefaultScopeArrayOutput() ClientDefaultScopeArrayOutput
	ToClientDefaultScopeArrayOutputWithContext(context.Context) ClientDefaultScopeArrayOutput
}

ClientDefaultScopeArrayInput is an input type that accepts ClientDefaultScopeArray and ClientDefaultScopeArrayOutput values. You can construct a concrete instance of `ClientDefaultScopeArrayInput` via: 

ClientDefaultScopeArray{ ClientDefaultScopeArgs{...} }

type ClientDefaultScopeArrayOutput 

type ClientDefaultScopeArrayOutput struct{ *pulumi.OutputState }

func (ClientDefaultScopeArrayOutput) ElementType 

func (ClientDefaultScopeArrayOutput) ElementType() reflect.Type

func (ClientDefaultScopeArrayOutput) Index 

func (o ClientDefaultScopeArrayOutput) Index(i pulumi.IntInput) ClientDefaultScopeOutput

func (ClientDefaultScopeArrayOutput) ToClientDefaultScopeArrayOutput 

func (o ClientDefaultScopeArrayOutput) ToClientDefaultScopeArrayOutput() ClientDefaultScopeArrayOutput

func (ClientDefaultScopeArrayOutput) ToClientDefaultScopeArrayOutputWithContext 

func (o ClientDefaultScopeArrayOutput) ToClientDefaultScopeArrayOutputWithContext(ctx context.Context) ClientDefaultScopeArrayOutput

type ClientDefaultScopeInput 

type ClientDefaultScopeInput interface {
	pulumi.Input

	ToClientDefaultScopeOutput() ClientDefaultScopeOutput
	ToClientDefaultScopeOutputWithContext(ctx context.Context) ClientDefaultScopeOutput
}

type ClientDefaultScopeMap 

type ClientDefaultScopeMap map[string]ClientDefaultScopeInput

func (ClientDefaultScopeMap) ElementType 

func (ClientDefaultScopeMap) ElementType() reflect.Type

func (ClientDefaultScopeMap) ToClientDefaultScopeMapOutput 

func (i ClientDefaultScopeMap) ToClientDefaultScopeMapOutput() ClientDefaultScopeMapOutput

func (ClientDefaultScopeMap) ToClientDefaultScopeMapOutputWithContext 

func (i ClientDefaultScopeMap) ToClientDefaultScopeMapOutputWithContext(ctx context.Context) ClientDefaultScopeMapOutput

type ClientDefaultScopeMapInput 

type ClientDefaultScopeMapInput interface {
	pulumi.Input

	ToClientDefaultScopeMapOutput() ClientDefaultScopeMapOutput
	ToClientDefaultScopeMapOutputWithContext(context.Context) ClientDefaultScopeMapOutput
}

ClientDefaultScopeMapInput is an input type that accepts ClientDefaultScopeMap and ClientDefaultScopeMapOutput values. You can construct a concrete instance of `ClientDefaultScopeMapInput` via: 

ClientDefaultScopeMap{ "key": ClientDefaultScopeArgs{...} }

type ClientDefaultScopeMapOutput 

type ClientDefaultScopeMapOutput struct{ *pulumi.OutputState }

func (ClientDefaultScopeMapOutput) ElementType 

func (ClientDefaultScopeMapOutput) ElementType() reflect.Type

func (ClientDefaultScopeMapOutput) MapIndex 

func (o ClientDefaultScopeMapOutput) MapIndex(k pulumi.StringInput) ClientDefaultScopeOutput

func (ClientDefaultScopeMapOutput) ToClientDefaultScopeMapOutput 

func (o ClientDefaultScopeMapOutput) ToClientDefaultScopeMapOutput() ClientDefaultScopeMapOutput

func (ClientDefaultScopeMapOutput) ToClientDefaultScopeMapOutputWithContext 

func (o ClientDefaultScopeMapOutput) ToClientDefaultScopeMapOutputWithContext(ctx context.Context) ClientDefaultScopeMapOutput

type ClientDefaultScopeOutput 

type ClientDefaultScopeOutput struct{ *pulumi.OutputState }

func (ClientDefaultScopeOutput) ClientId 

func (o ClientDefaultScopeOutput) ClientId() pulumi.StringOutput

The ID of the client to attach default scopes to. Note that this is the unique ID of the client generated by Keycloak.

func (ClientDefaultScopeOutput) DefaultScopes 

func (o ClientDefaultScopeOutput) DefaultScopes() pulumi.StringArrayOutput

An array of client scope names to attach to this client.

func (ClientDefaultScopeOutput) ElementType 

func (ClientDefaultScopeOutput) ElementType() reflect.Type

func (ClientDefaultScopeOutput) RealmId 

func (o ClientDefaultScopeOutput) RealmId() pulumi.StringOutput

The realm this client and scopes exists in.

func (ClientDefaultScopeOutput) ToClientDefaultScopeOutput 

func (o ClientDefaultScopeOutput) ToClientDefaultScopeOutput() ClientDefaultScopeOutput

func (ClientDefaultScopeOutput) ToClientDefaultScopeOutputWithContext 

func (o ClientDefaultScopeOutput) ToClientDefaultScopeOutputWithContext(ctx context.Context) ClientDefaultScopeOutput

type ClientDefaultScopeState 

type ClientDefaultScopeState struct {
	// The ID of the client to attach default scopes to. Note that this is the unique ID of the client generated by Keycloak.
	ClientId pulumi.StringPtrInput
	// An array of client scope names to attach to this client.
	DefaultScopes pulumi.StringArrayInput
	// The realm this client and scopes exists in.
	RealmId pulumi.StringPtrInput
}

func (ClientDefaultScopeState) ElementType 

func (ClientDefaultScopeState) ElementType() reflect.Type

type ClientInput 

type ClientInput interface {
	pulumi.Input

	ToClientOutput() ClientOutput
	ToClientOutputWithContext(ctx context.Context) ClientOutput
}

type ClientMap 

type ClientMap map[string]ClientInput

func (ClientMap) ElementType 

func (ClientMap) ElementType() reflect.Type

func (ClientMap) ToClientMapOutput 

func (i ClientMap) ToClientMapOutput() ClientMapOutput

func (ClientMap) ToClientMapOutputWithContext 

func (i ClientMap) ToClientMapOutputWithContext(ctx context.Context) ClientMapOutput

type ClientMapInput 

type ClientMapInput interface {
	pulumi.Input

	ToClientMapOutput() ClientMapOutput
	ToClientMapOutputWithContext(context.Context) ClientMapOutput
}

ClientMapInput is an input type that accepts ClientMap and ClientMapOutput values. You can construct a concrete instance of `ClientMapInput` via: 

ClientMap{ "key": ClientArgs{...} }

type ClientMapOutput 

type ClientMapOutput struct{ *pulumi.OutputState }

func (ClientMapOutput) ElementType 

func (ClientMapOutput) ElementType() reflect.Type

func (ClientMapOutput) MapIndex 

func (o ClientMapOutput) MapIndex(k pulumi.StringInput) ClientOutput

func (ClientMapOutput) ToClientMapOutput 

func (o ClientMapOutput) ToClientMapOutput() ClientMapOutput

func (ClientMapOutput) ToClientMapOutputWithContext 

func (o ClientMapOutput) ToClientMapOutputWithContext(ctx context.Context) ClientMapOutput

type ClientOutput 

type ClientOutput struct{ *pulumi.OutputState }

func (ClientOutput) AssertionConsumerPostUrl 

func (o ClientOutput) AssertionConsumerPostUrl() pulumi.StringPtrOutput

SAML POST Binding URL for the client's assertion consumer service (login responses).

func (ClientOutput) AssertionConsumerRedirectUrl 

func (o ClientOutput) AssertionConsumerRedirectUrl() pulumi.StringPtrOutput

SAML Redirect Binding URL for the client's assertion consumer service (login responses).

func (ClientOutput) AuthenticationFlowBindingOverrides 

func (o ClientOutput) AuthenticationFlowBindingOverrides() ClientAuthenticationFlowBindingOverridesPtrOutput

Override realm authentication flow bindings

func (ClientOutput) BaseUrl 

func (o ClientOutput) BaseUrl() pulumi.StringPtrOutput

When specified, this URL will be used whenever Keycloak needs to link to this client.

func (ClientOutput) CanonicalizationMethod 

func (o ClientOutput) CanonicalizationMethod() pulumi.StringPtrOutput

The Canonicalization Method for XML signatures. Should be one of "EXCLUSIVE", "EXCLUSIVE_WITH_COMMENTS", "INCLUSIVE", or "INCLUSIVE_WITH_COMMENTS". Defaults to "EXCLUSIVE".

func (ClientOutput) ClientId 

func (o ClientOutput) ClientId() pulumi.StringOutput

The unique ID of this client, referenced in the URI during authentication and in issued tokens.

func (ClientOutput) ClientSignatureRequired 

func (o ClientOutput) ClientSignatureRequired() pulumi.BoolPtrOutput

When `true`, Keycloak will expect that documents originating from a client will be signed using the certificate and/or key configured via `signingCertificate` and `signingPrivateKey`. Defaults to `true`.

func (ClientOutput) Description 

func (o ClientOutput) Description() pulumi.StringPtrOutput

The description of this client in the GUI.

func (ClientOutput) ElementType 

func (ClientOutput) ElementType() reflect.Type

func (ClientOutput) Enabled 

func (o ClientOutput) Enabled() pulumi.BoolPtrOutput

When false, this client will not be able to initiate a login or obtain access tokens. Defaults to `true`.

func (ClientOutput) EncryptAssertions 

func (o ClientOutput) EncryptAssertions() pulumi.BoolPtrOutput

When `true`, the SAML assertions will be encrypted by Keycloak using the client's public key. Defaults to `false`.

func (ClientOutput) EncryptionCertificate 

func (o ClientOutput) EncryptionCertificate() pulumi.StringOutput

If assertions for the client are encrypted, this certificate will be used for encryption.

func (ClientOutput) EncryptionCertificateSha1 

func (o ClientOutput) EncryptionCertificateSha1() pulumi.StringOutput

(Computed) The sha1sum fingerprint of the encryption certificate. If the encryption certificate is not in correct base64 format, this will be left empty.

func (ClientOutput) ExtraConfig 

func (o ClientOutput) ExtraConfig() pulumi.StringMapOutput

func (ClientOutput) ForceNameIdFormat 

func (o ClientOutput) ForceNameIdFormat() pulumi.BoolPtrOutput

Ignore requested NameID subject format and use the one defined in `nameIdFormat` instead. Defaults to `false`.

func (ClientOutput) ForcePostBinding 

func (o ClientOutput) ForcePostBinding() pulumi.BoolPtrOutput

When `true`, Keycloak will always respond to an authentication request via the SAML POST Binding. Defaults to `true`.

func (ClientOutput) FrontChannelLogout 

func (o ClientOutput) FrontChannelLogout() pulumi.BoolPtrOutput

When `true`, this client will require a browser redirect in order to perform a logout. Defaults to `true`.

func (ClientOutput) FullScopeAllowed 

func (o ClientOutput) FullScopeAllowed() pulumi.BoolPtrOutput

Allow to include all roles mappings in the access token

func (ClientOutput) IdpInitiatedSsoRelayState 

func (o ClientOutput) IdpInitiatedSsoRelayState() pulumi.StringPtrOutput

Relay state you want to send with SAML request when you want to do IDP Initiated SSO.

func (ClientOutput) IdpInitiatedSsoUrlName 

func (o ClientOutput) IdpInitiatedSsoUrlName() pulumi.StringPtrOutput

URL fragment name to reference client when you want to do IDP Initiated SSO.

func (ClientOutput) IncludeAuthnStatement 

func (o ClientOutput) IncludeAuthnStatement() pulumi.BoolPtrOutput

When `true`, an `AuthnStatement` will be included in the SAML response. Defaults to `true`.

func (ClientOutput) LoginTheme 

func (o ClientOutput) LoginTheme() pulumi.StringPtrOutput

The login theme of this client.

func (ClientOutput) LogoutServicePostBindingUrl 

func (o ClientOutput) LogoutServicePostBindingUrl() pulumi.StringPtrOutput

SAML POST Binding URL for the client's single logout service.

func (ClientOutput) LogoutServiceRedirectBindingUrl 

func (o ClientOutput) LogoutServiceRedirectBindingUrl() pulumi.StringPtrOutput

SAML Redirect Binding URL for the client's single logout service.

func (ClientOutput) MasterSamlProcessingUrl 

func (o ClientOutput) MasterSamlProcessingUrl() pulumi.StringPtrOutput

When specified, this URL will be used for all SAML requests.

func (ClientOutput) Name 

func (o ClientOutput) Name() pulumi.StringOutput

The display name of this client in the GUI.

func (ClientOutput) NameIdFormat 

func (o ClientOutput) NameIdFormat() pulumi.StringOutput

Sets the Name ID format for the subject.

func (ClientOutput) RealmId 

func (o ClientOutput) RealmId() pulumi.StringOutput

The realm this client is attached to.

func (ClientOutput) RootUrl 

func (o ClientOutput) RootUrl() pulumi.StringPtrOutput

When specified, this value is prepended to all relative URLs.

func (ClientOutput) SignAssertions 

func (o ClientOutput) SignAssertions() pulumi.BoolPtrOutput

When `true`, the SAML assertions will be signed by Keycloak using the realm's private key, and embedded within the SAML XML Auth response. Defaults to `false`.

func (ClientOutput) SignDocuments 

func (o ClientOutput) SignDocuments() pulumi.BoolPtrOutput

When `true`, the SAML document will be signed by Keycloak using the realm's private key. Defaults to `true`.

func (ClientOutput) SignatureAlgorithm 

func (o ClientOutput) SignatureAlgorithm() pulumi.StringPtrOutput

The signature algorithm used to sign documents. Should be one of "RSA_SHA1", "RSA_SHA256", "RSA_SHA256_MGF1, "RSA_SHA512", "RSA_SHA512_MGF1" or "DSA_SHA1".

func (ClientOutput) SignatureKeyName 

func (o ClientOutput) SignatureKeyName() pulumi.StringPtrOutput

The value of the `KeyName` element within the signed SAML document. Should be one of "NONE", "KEY_ID", or "CERT_SUBJECT". Defaults to "KEY_ID".

func (ClientOutput) SigningCertificate 

func (o ClientOutput) SigningCertificate() pulumi.StringOutput

If documents or assertions from the client are signed, this certificate will be used to verify the signature.

func (ClientOutput) SigningCertificateSha1 

func (o ClientOutput) SigningCertificateSha1() pulumi.StringOutput

(Computed) The sha1sum fingerprint of the signing certificate. If the signing certificate is not in correct base64 format, this will be left empty.

func (ClientOutput) SigningPrivateKey 

func (o ClientOutput) SigningPrivateKey() pulumi.StringOutput

If documents or assertions from the client are signed, this private key will be used to verify the signature.

func (ClientOutput) SigningPrivateKeySha1 

func (o ClientOutput) SigningPrivateKeySha1() pulumi.StringOutput

(Computed) The sha1sum fingerprint of the signing private key. If the signing private key is not in correct base64 format, this will be left empty.

func (ClientOutput) ToClientOutput 

func (o ClientOutput) ToClientOutput() ClientOutput

func (ClientOutput) ToClientOutputWithContext 

func (o ClientOutput) ToClientOutputWithContext(ctx context.Context) ClientOutput

func (ClientOutput) ValidRedirectUris 

func (o ClientOutput) ValidRedirectUris() pulumi.StringArrayOutput

When specified, Keycloak will use this list to validate given Assertion Consumer URLs specified in the authentication request.

type ClientScope 

type ClientScope struct {
	pulumi.CustomResourceState

	// When set, a consent screen will be displayed to users authenticating to clients with this scope attached. The consent screen will display the string value of this attribute.
	ConsentScreenText pulumi.StringPtrOutput `pulumi:"consentScreenText"`
	// The description of this client scope in the GUI.
	Description pulumi.StringPtrOutput `pulumi:"description"`
	// Specify order of the client scope in GUI (such as in Consent page) as integer.
	GuiOrder pulumi.IntPtrOutput `pulumi:"guiOrder"`
	// The display name of this client scope in the GUI.
	Name pulumi.StringOutput `pulumi:"name"`
	// The realm this client scope belongs to.
	RealmId pulumi.StringOutput `pulumi:"realmId"`
}

Allows for creating and managing Keycloak client scopes that can be attached to clients that use the SAML protocol.

Client Scopes can be used to share common protocol and role mappings between multiple clients within a realm.

## Example Usage

```go package main

import ( 

"github.com/pulumi/pulumi-keycloak/sdk/v5/go/keycloak"
"github.com/pulumi/pulumi-keycloak/sdk/v5/go/keycloak/saml"
"github.com/pulumi/pulumi/sdk/v3/go/pulumi"

) 

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		realm, err := keycloak.NewRealm(ctx, "realm", &keycloak.RealmArgs{
			Realm:   pulumi.String("my-realm"),
			Enabled: pulumi.Bool(true),
		})
		if err != nil {
			return err
		}
		_, err = saml.NewClientScope(ctx, "saml_client_scope", &saml.ClientScopeArgs{
			RealmId:     realm.ID(),
			Name:        pulumi.String("groups"),
			Description: pulumi.String("This scope will map a user's group memberships to SAML assertion"),
			GuiOrder:    pulumi.Int(1),
		})
		if err != nil {
			return err
		}
		return nil
	})
}

```

## Import

Client scopes can be imported using the format `{{realm_id}}/{{client_scope_id}}`, where `client_scope_id` is the unique ID that Keycloak

assigns to the client scope upon creation. This value can be found in the URI when editing this client scope in the GUI, and is typically a GUID.

Example:

bash

```sh $ pulumi import keycloak:saml/clientScope:ClientScope saml_client_scope my-realm/e8a5d115-6985-4de3-a0f5-732e1be4525e ```

func GetClientScope 

func GetClientScope(ctx *pulumi.Context,
	name string, id pulumi.IDInput, state *ClientScopeState, opts ...pulumi.ResourceOption) (*ClientScope, error)

GetClientScope gets an existing ClientScope resource's state with the given name, ID, and optional state properties that are used to uniquely qualify the lookup (nil if not required).

func NewClientScope 

func NewClientScope(ctx *pulumi.Context,
	name string, args *ClientScopeArgs, opts ...pulumi.ResourceOption) (*ClientScope, error)

NewClientScope registers a new resource with the given unique name, arguments, and options.

func (*ClientScope) ElementType 

func (*ClientScope) ElementType() reflect.Type

func (*ClientScope) ToClientScopeOutput 

func (i *ClientScope) ToClientScopeOutput() ClientScopeOutput

func (*ClientScope) ToClientScopeOutputWithContext 

func (i *ClientScope) ToClientScopeOutputWithContext(ctx context.Context) ClientScopeOutput

type ClientScopeArgs 

type ClientScopeArgs struct {
	// When set, a consent screen will be displayed to users authenticating to clients with this scope attached. The consent screen will display the string value of this attribute.
	ConsentScreenText pulumi.StringPtrInput
	// The description of this client scope in the GUI.
	Description pulumi.StringPtrInput
	// Specify order of the client scope in GUI (such as in Consent page) as integer.
	GuiOrder pulumi.IntPtrInput
	// The display name of this client scope in the GUI.
	Name pulumi.StringPtrInput
	// The realm this client scope belongs to.
	RealmId pulumi.StringInput
}

The set of arguments for constructing a ClientScope resource.

func (ClientScopeArgs) ElementType 

func (ClientScopeArgs) ElementType() reflect.Type

type ClientScopeArray 

type ClientScopeArray []ClientScopeInput

func (ClientScopeArray) ElementType 

func (ClientScopeArray) ElementType() reflect.Type

func (ClientScopeArray) ToClientScopeArrayOutput 

func (i ClientScopeArray) ToClientScopeArrayOutput() ClientScopeArrayOutput

func (ClientScopeArray) ToClientScopeArrayOutputWithContext 

func (i ClientScopeArray) ToClientScopeArrayOutputWithContext(ctx context.Context) ClientScopeArrayOutput

type ClientScopeArrayInput 

type ClientScopeArrayInput interface {
	pulumi.Input

	ToClientScopeArrayOutput() ClientScopeArrayOutput
	ToClientScopeArrayOutputWithContext(context.Context) ClientScopeArrayOutput
}

ClientScopeArrayInput is an input type that accepts ClientScopeArray and ClientScopeArrayOutput values. You can construct a concrete instance of `ClientScopeArrayInput` via: 

ClientScopeArray{ ClientScopeArgs{...} }

type ClientScopeArrayOutput 

type ClientScopeArrayOutput struct{ *pulumi.OutputState }

func (ClientScopeArrayOutput) ElementType 

func (ClientScopeArrayOutput) ElementType() reflect.Type

func (ClientScopeArrayOutput) Index 

func (o ClientScopeArrayOutput) Index(i pulumi.IntInput) ClientScopeOutput

func (ClientScopeArrayOutput) ToClientScopeArrayOutput 

func (o ClientScopeArrayOutput) ToClientScopeArrayOutput() ClientScopeArrayOutput

func (ClientScopeArrayOutput) ToClientScopeArrayOutputWithContext 

func (o ClientScopeArrayOutput) ToClientScopeArrayOutputWithContext(ctx context.Context) ClientScopeArrayOutput

type ClientScopeInput 

type ClientScopeInput interface {
	pulumi.Input

	ToClientScopeOutput() ClientScopeOutput
	ToClientScopeOutputWithContext(ctx context.Context) ClientScopeOutput
}

type ClientScopeMap 

type ClientScopeMap map[string]ClientScopeInput

func (ClientScopeMap) ElementType 

func (ClientScopeMap) ElementType() reflect.Type

func (ClientScopeMap) ToClientScopeMapOutput 

func (i ClientScopeMap) ToClientScopeMapOutput() ClientScopeMapOutput

func (ClientScopeMap) ToClientScopeMapOutputWithContext 

func (i ClientScopeMap) ToClientScopeMapOutputWithContext(ctx context.Context) ClientScopeMapOutput

type ClientScopeMapInput 

type ClientScopeMapInput interface {
	pulumi.Input

	ToClientScopeMapOutput() ClientScopeMapOutput
	ToClientScopeMapOutputWithContext(context.Context) ClientScopeMapOutput
}

ClientScopeMapInput is an input type that accepts ClientScopeMap and ClientScopeMapOutput values. You can construct a concrete instance of `ClientScopeMapInput` via: 

ClientScopeMap{ "key": ClientScopeArgs{...} }

type ClientScopeMapOutput 

type ClientScopeMapOutput struct{ *pulumi.OutputState }

func (ClientScopeMapOutput) ElementType 

func (ClientScopeMapOutput) ElementType() reflect.Type

func (ClientScopeMapOutput) MapIndex 

func (o ClientScopeMapOutput) MapIndex(k pulumi.StringInput) ClientScopeOutput

func (ClientScopeMapOutput) ToClientScopeMapOutput 

func (o ClientScopeMapOutput) ToClientScopeMapOutput() ClientScopeMapOutput

func (ClientScopeMapOutput) ToClientScopeMapOutputWithContext 

func (o ClientScopeMapOutput) ToClientScopeMapOutputWithContext(ctx context.Context) ClientScopeMapOutput

type ClientScopeOutput 

type ClientScopeOutput struct{ *pulumi.OutputState }

func (ClientScopeOutput) ConsentScreenText 

func (o ClientScopeOutput) ConsentScreenText() pulumi.StringPtrOutput

When set, a consent screen will be displayed to users authenticating to clients with this scope attached. The consent screen will display the string value of this attribute.

func (ClientScopeOutput) Description 

func (o ClientScopeOutput) Description() pulumi.StringPtrOutput

The description of this client scope in the GUI.

func (ClientScopeOutput) ElementType 

func (ClientScopeOutput) ElementType() reflect.Type

func (ClientScopeOutput) GuiOrder 

func (o ClientScopeOutput) GuiOrder() pulumi.IntPtrOutput

Specify order of the client scope in GUI (such as in Consent page) as integer.

func (ClientScopeOutput) Name 

func (o ClientScopeOutput) Name() pulumi.StringOutput

The display name of this client scope in the GUI.

func (ClientScopeOutput) RealmId 

func (o ClientScopeOutput) RealmId() pulumi.StringOutput

The realm this client scope belongs to.

func (ClientScopeOutput) ToClientScopeOutput 

func (o ClientScopeOutput) ToClientScopeOutput() ClientScopeOutput

func (ClientScopeOutput) ToClientScopeOutputWithContext 

func (o ClientScopeOutput) ToClientScopeOutputWithContext(ctx context.Context) ClientScopeOutput

type ClientScopeState 

type ClientScopeState struct {
	// When set, a consent screen will be displayed to users authenticating to clients with this scope attached. The consent screen will display the string value of this attribute.
	ConsentScreenText pulumi.StringPtrInput
	// The description of this client scope in the GUI.
	Description pulumi.StringPtrInput
	// Specify order of the client scope in GUI (such as in Consent page) as integer.
	GuiOrder pulumi.IntPtrInput
	// The display name of this client scope in the GUI.
	Name pulumi.StringPtrInput
	// The realm this client scope belongs to.
	RealmId pulumi.StringPtrInput
}

func (ClientScopeState) ElementType 

func (ClientScopeState) ElementType() reflect.Type

type ClientState 

type ClientState struct {
	// SAML POST Binding URL for the client's assertion consumer service (login responses).
	AssertionConsumerPostUrl pulumi.StringPtrInput
	// SAML Redirect Binding URL for the client's assertion consumer service (login responses).
	AssertionConsumerRedirectUrl pulumi.StringPtrInput
	// Override realm authentication flow bindings
	AuthenticationFlowBindingOverrides ClientAuthenticationFlowBindingOverridesPtrInput
	// When specified, this URL will be used whenever Keycloak needs to link to this client.
	BaseUrl pulumi.StringPtrInput
	// The Canonicalization Method for XML signatures. Should be one of "EXCLUSIVE", "EXCLUSIVE_WITH_COMMENTS", "INCLUSIVE", or "INCLUSIVE_WITH_COMMENTS". Defaults to "EXCLUSIVE".
	CanonicalizationMethod pulumi.StringPtrInput
	// The unique ID of this client, referenced in the URI during authentication and in issued tokens.
	ClientId pulumi.StringPtrInput
	// When `true`, Keycloak will expect that documents originating from a client will be signed using the certificate and/or key configured via `signingCertificate` and `signingPrivateKey`. Defaults to `true`.
	ClientSignatureRequired pulumi.BoolPtrInput
	// The description of this client in the GUI.
	Description pulumi.StringPtrInput
	// When false, this client will not be able to initiate a login or obtain access tokens. Defaults to `true`.
	Enabled pulumi.BoolPtrInput
	// When `true`, the SAML assertions will be encrypted by Keycloak using the client's public key. Defaults to `false`.
	EncryptAssertions pulumi.BoolPtrInput
	// If assertions for the client are encrypted, this certificate will be used for encryption.
	EncryptionCertificate pulumi.StringPtrInput
	// (Computed) The sha1sum fingerprint of the encryption certificate. If the encryption certificate is not in correct base64 format, this will be left empty.
	EncryptionCertificateSha1 pulumi.StringPtrInput
	ExtraConfig               pulumi.StringMapInput
	// Ignore requested NameID subject format and use the one defined in `nameIdFormat` instead. Defaults to `false`.
	ForceNameIdFormat pulumi.BoolPtrInput
	// When `true`, Keycloak will always respond to an authentication request via the SAML POST Binding. Defaults to `true`.
	ForcePostBinding pulumi.BoolPtrInput
	// When `true`, this client will require a browser redirect in order to perform a logout. Defaults to `true`.
	FrontChannelLogout pulumi.BoolPtrInput
	// Allow to include all roles mappings in the access token
	FullScopeAllowed pulumi.BoolPtrInput
	// Relay state you want to send with SAML request when you want to do IDP Initiated SSO.
	IdpInitiatedSsoRelayState pulumi.StringPtrInput
	// URL fragment name to reference client when you want to do IDP Initiated SSO.
	IdpInitiatedSsoUrlName pulumi.StringPtrInput
	// When `true`, an `AuthnStatement` will be included in the SAML response. Defaults to `true`.
	IncludeAuthnStatement pulumi.BoolPtrInput
	// The login theme of this client.
	LoginTheme pulumi.StringPtrInput
	// SAML POST Binding URL for the client's single logout service.
	LogoutServicePostBindingUrl pulumi.StringPtrInput
	// SAML Redirect Binding URL for the client's single logout service.
	LogoutServiceRedirectBindingUrl pulumi.StringPtrInput
	// When specified, this URL will be used for all SAML requests.
	MasterSamlProcessingUrl pulumi.StringPtrInput
	// The display name of this client in the GUI.
	Name pulumi.StringPtrInput
	// Sets the Name ID format for the subject.
	NameIdFormat pulumi.StringPtrInput
	// The realm this client is attached to.
	RealmId pulumi.StringPtrInput
	// When specified, this value is prepended to all relative URLs.
	RootUrl pulumi.StringPtrInput
	// When `true`, the SAML assertions will be signed by Keycloak using the realm's private key, and embedded within the SAML XML Auth response. Defaults to `false`.
	SignAssertions pulumi.BoolPtrInput
	// When `true`, the SAML document will be signed by Keycloak using the realm's private key. Defaults to `true`.
	SignDocuments pulumi.BoolPtrInput
	// The signature algorithm used to sign documents. Should be one of "RSA_SHA1", "RSA_SHA256", "RSA_SHA256_MGF1, "RSA_SHA512", "RSA_SHA512_MGF1" or "DSA_SHA1".
	SignatureAlgorithm pulumi.StringPtrInput
	// The value of the `KeyName` element within the signed SAML document. Should be one of "NONE", "KEY_ID", or "CERT_SUBJECT". Defaults to "KEY_ID".
	SignatureKeyName pulumi.StringPtrInput
	// If documents or assertions from the client are signed, this certificate will be used to verify the signature.
	SigningCertificate pulumi.StringPtrInput
	// (Computed) The sha1sum fingerprint of the signing certificate. If the signing certificate is not in correct base64 format, this will be left empty.
	SigningCertificateSha1 pulumi.StringPtrInput
	// If documents or assertions from the client are signed, this private key will be used to verify the signature.
	SigningPrivateKey pulumi.StringPtrInput
	// (Computed) The sha1sum fingerprint of the signing private key. If the signing private key is not in correct base64 format, this will be left empty.
	SigningPrivateKeySha1 pulumi.StringPtrInput
	// When specified, Keycloak will use this list to validate given Assertion Consumer URLs specified in the authentication request.
	ValidRedirectUris pulumi.StringArrayInput
}

func (ClientState) ElementType 

func (ClientState) ElementType() reflect.Type

type GetClientAuthenticationFlowBindingOverride 

type GetClientAuthenticationFlowBindingOverride struct {
	BrowserId     string `pulumi:"browserId"`
	DirectGrantId string `pulumi:"directGrantId"`
}

type GetClientAuthenticationFlowBindingOverrideArgs 

type GetClientAuthenticationFlowBindingOverrideArgs struct {
	BrowserId     pulumi.StringInput `pulumi:"browserId"`
	DirectGrantId pulumi.StringInput `pulumi:"directGrantId"`
}

func (GetClientAuthenticationFlowBindingOverrideArgs) ElementType 

func (GetClientAuthenticationFlowBindingOverrideArgs) ElementType() reflect.Type

func (GetClientAuthenticationFlowBindingOverrideArgs) ToGetClientAuthenticationFlowBindingOverrideOutput 

func (i GetClientAuthenticationFlowBindingOverrideArgs) ToGetClientAuthenticationFlowBindingOverrideOutput() GetClientAuthenticationFlowBindingOverrideOutput

func (GetClientAuthenticationFlowBindingOverrideArgs) ToGetClientAuthenticationFlowBindingOverrideOutputWithContext 

func (i GetClientAuthenticationFlowBindingOverrideArgs) ToGetClientAuthenticationFlowBindingOverrideOutputWithContext(ctx context.Context) GetClientAuthenticationFlowBindingOverrideOutput

type GetClientAuthenticationFlowBindingOverrideArray 

type GetClientAuthenticationFlowBindingOverrideArray []GetClientAuthenticationFlowBindingOverrideInput

func (GetClientAuthenticationFlowBindingOverrideArray) ElementType 

func (GetClientAuthenticationFlowBindingOverrideArray) ElementType() reflect.Type

func (GetClientAuthenticationFlowBindingOverrideArray) ToGetClientAuthenticationFlowBindingOverrideArrayOutput 

func (i GetClientAuthenticationFlowBindingOverrideArray) ToGetClientAuthenticationFlowBindingOverrideArrayOutput() GetClientAuthenticationFlowBindingOverrideArrayOutput

func (GetClientAuthenticationFlowBindingOverrideArray) ToGetClientAuthenticationFlowBindingOverrideArrayOutputWithContext 

func (i GetClientAuthenticationFlowBindingOverrideArray) ToGetClientAuthenticationFlowBindingOverrideArrayOutputWithContext(ctx context.Context) GetClientAuthenticationFlowBindingOverrideArrayOutput

type GetClientAuthenticationFlowBindingOverrideArrayInput 

type GetClientAuthenticationFlowBindingOverrideArrayInput interface {
	pulumi.Input

	ToGetClientAuthenticationFlowBindingOverrideArrayOutput() GetClientAuthenticationFlowBindingOverrideArrayOutput
	ToGetClientAuthenticationFlowBindingOverrideArrayOutputWithContext(context.Context) GetClientAuthenticationFlowBindingOverrideArrayOutput
}

GetClientAuthenticationFlowBindingOverrideArrayInput is an input type that accepts GetClientAuthenticationFlowBindingOverrideArray and GetClientAuthenticationFlowBindingOverrideArrayOutput values. You can construct a concrete instance of `GetClientAuthenticationFlowBindingOverrideArrayInput` via: 

GetClientAuthenticationFlowBindingOverrideArray{ GetClientAuthenticationFlowBindingOverrideArgs{...} }

type GetClientAuthenticationFlowBindingOverrideArrayOutput 

type GetClientAuthenticationFlowBindingOverrideArrayOutput struct{ *pulumi.OutputState }

func (GetClientAuthenticationFlowBindingOverrideArrayOutput) ElementType 

func (GetClientAuthenticationFlowBindingOverrideArrayOutput) ElementType() reflect.Type

func (GetClientAuthenticationFlowBindingOverrideArrayOutput) Index 

func (o GetClientAuthenticationFlowBindingOverrideArrayOutput) Index(i pulumi.IntInput) GetClientAuthenticationFlowBindingOverrideOutput

func (GetClientAuthenticationFlowBindingOverrideArrayOutput) ToGetClientAuthenticationFlowBindingOverrideArrayOutput 

func (o GetClientAuthenticationFlowBindingOverrideArrayOutput) ToGetClientAuthenticationFlowBindingOverrideArrayOutput() GetClientAuthenticationFlowBindingOverrideArrayOutput

func (GetClientAuthenticationFlowBindingOverrideArrayOutput) ToGetClientAuthenticationFlowBindingOverrideArrayOutputWithContext 

func (o GetClientAuthenticationFlowBindingOverrideArrayOutput) ToGetClientAuthenticationFlowBindingOverrideArrayOutputWithContext(ctx context.Context) GetClientAuthenticationFlowBindingOverrideArrayOutput

type GetClientAuthenticationFlowBindingOverrideInput 

type GetClientAuthenticationFlowBindingOverrideInput interface {
	pulumi.Input

	ToGetClientAuthenticationFlowBindingOverrideOutput() GetClientAuthenticationFlowBindingOverrideOutput
	ToGetClientAuthenticationFlowBindingOverrideOutputWithContext(context.Context) GetClientAuthenticationFlowBindingOverrideOutput
}

GetClientAuthenticationFlowBindingOverrideInput is an input type that accepts GetClientAuthenticationFlowBindingOverrideArgs and GetClientAuthenticationFlowBindingOverrideOutput values. You can construct a concrete instance of `GetClientAuthenticationFlowBindingOverrideInput` via: 

GetClientAuthenticationFlowBindingOverrideArgs{...}

type GetClientAuthenticationFlowBindingOverrideOutput 

type GetClientAuthenticationFlowBindingOverrideOutput struct{ *pulumi.OutputState }

func (GetClientAuthenticationFlowBindingOverrideOutput) BrowserId 

func (o GetClientAuthenticationFlowBindingOverrideOutput) BrowserId() pulumi.StringOutput

func (GetClientAuthenticationFlowBindingOverrideOutput) DirectGrantId 

func (o GetClientAuthenticationFlowBindingOverrideOutput) DirectGrantId() pulumi.StringOutput

func (GetClientAuthenticationFlowBindingOverrideOutput) ElementType 

func (GetClientAuthenticationFlowBindingOverrideOutput) ElementType() reflect.Type

func (GetClientAuthenticationFlowBindingOverrideOutput) ToGetClientAuthenticationFlowBindingOverrideOutput 

func (o GetClientAuthenticationFlowBindingOverrideOutput) ToGetClientAuthenticationFlowBindingOverrideOutput() GetClientAuthenticationFlowBindingOverrideOutput

func (GetClientAuthenticationFlowBindingOverrideOutput) ToGetClientAuthenticationFlowBindingOverrideOutputWithContext 

func (o GetClientAuthenticationFlowBindingOverrideOutput) ToGetClientAuthenticationFlowBindingOverrideOutputWithContext(ctx context.Context) GetClientAuthenticationFlowBindingOverrideOutput

type GetClientInstallationProviderArgs 

type GetClientInstallationProviderArgs struct {
	// The ID of the SAML client. The `id` attribute of a `keycloakClient` resource should be used here.
	ClientId string `pulumi:"clientId"`
	// The ID of the SAML installation provider. Could be one of `saml-idp-descriptor`, `keycloak-saml`, `saml-sp-descriptor`, `keycloak-saml-subsystem`, `mod-auth-mellon`, etc.
	ProviderId string `pulumi:"providerId"`
	// The realm that the SAML client exists within.
	RealmId string `pulumi:"realmId"`
}

A collection of arguments for invoking getClientInstallationProvider.

type GetClientInstallationProviderOutputArgs 

type GetClientInstallationProviderOutputArgs struct {
	// The ID of the SAML client. The `id` attribute of a `keycloakClient` resource should be used here.
	ClientId pulumi.StringInput `pulumi:"clientId"`
	// The ID of the SAML installation provider. Could be one of `saml-idp-descriptor`, `keycloak-saml`, `saml-sp-descriptor`, `keycloak-saml-subsystem`, `mod-auth-mellon`, etc.
	ProviderId pulumi.StringInput `pulumi:"providerId"`
	// The realm that the SAML client exists within.
	RealmId pulumi.StringInput `pulumi:"realmId"`
}

A collection of arguments for invoking getClientInstallationProvider.

func (GetClientInstallationProviderOutputArgs) ElementType 

func (GetClientInstallationProviderOutputArgs) ElementType() reflect.Type

type GetClientInstallationProviderResult 

type GetClientInstallationProviderResult struct {
	ClientId string `pulumi:"clientId"`
	// The provider-assigned unique ID for this managed resource.
	Id         string `pulumi:"id"`
	ProviderId string `pulumi:"providerId"`
	RealmId    string `pulumi:"realmId"`
	// (Computed) The returned document needed for SAML installation.
	Value string `pulumi:"value"`
}

A collection of values returned by getClientInstallationProvider.

func GetClientInstallationProvider 

func GetClientInstallationProvider(ctx *pulumi.Context, args *GetClientInstallationProviderArgs, opts ...pulumi.InvokeOption) (*GetClientInstallationProviderResult, error)

This data source can be used to retrieve Installation Provider of a SAML Client.

type GetClientInstallationProviderResultOutput 

type GetClientInstallationProviderResultOutput struct{ *pulumi.OutputState }

A collection of values returned by getClientInstallationProvider.

func GetClientInstallationProviderOutput 

func GetClientInstallationProviderOutput(ctx *pulumi.Context, args GetClientInstallationProviderOutputArgs, opts ...pulumi.InvokeOption) GetClientInstallationProviderResultOutput

func (GetClientInstallationProviderResultOutput) ClientId 

func (o GetClientInstallationProviderResultOutput) ClientId() pulumi.StringOutput

func (GetClientInstallationProviderResultOutput) ElementType 

func (GetClientInstallationProviderResultOutput) ElementType() reflect.Type

func (GetClientInstallationProviderResultOutput) Id 

func (o GetClientInstallationProviderResultOutput) Id() pulumi.StringOutput

The provider-assigned unique ID for this managed resource.

func (GetClientInstallationProviderResultOutput) ProviderId 

func (o GetClientInstallationProviderResultOutput) ProviderId() pulumi.StringOutput

func (GetClientInstallationProviderResultOutput) RealmId 

func (o GetClientInstallationProviderResultOutput) RealmId() pulumi.StringOutput

func (GetClientInstallationProviderResultOutput) ToGetClientInstallationProviderResultOutput 

func (o GetClientInstallationProviderResultOutput) ToGetClientInstallationProviderResultOutput() GetClientInstallationProviderResultOutput

func (GetClientInstallationProviderResultOutput) ToGetClientInstallationProviderResultOutputWithContext 

func (o GetClientInstallationProviderResultOutput) ToGetClientInstallationProviderResultOutputWithContext(ctx context.Context) GetClientInstallationProviderResultOutput

func (GetClientInstallationProviderResultOutput) Value 

func (o GetClientInstallationProviderResultOutput) Value() pulumi.StringOutput

(Computed) The returned document needed for SAML installation.

type IdentityProvider 

type IdentityProvider struct {
	pulumi.CustomResourceState

	// When `true`, new users will be able to read stored tokens. This will automatically assign the `broker.read-token` role. Defaults to `false`.
	AddReadTokenRoleOnCreate pulumi.BoolPtrOutput `pulumi:"addReadTokenRoleOnCreate"`
	// The unique name of identity provider.
	Alias pulumi.StringOutput `pulumi:"alias"`
	// Authenticate users by default. Defaults to `false`.
	AuthenticateByDefault pulumi.BoolPtrOutput `pulumi:"authenticateByDefault"`
	// Ordered list of requested AuthnContext ClassRefs.
	AuthnContextClassRefs pulumi.StringArrayOutput `pulumi:"authnContextClassRefs"`
	// Specifies the comparison method used to evaluate the requested context classes or statements.
	AuthnContextComparisonType pulumi.StringPtrOutput `pulumi:"authnContextComparisonType"`
	// Ordered list of requested AuthnContext DeclRefs.
	AuthnContextDeclRefs pulumi.StringArrayOutput `pulumi:"authnContextDeclRefs"`
	// Does the external IDP support backchannel logout?. Defaults to `false`.
	BackchannelSupported pulumi.BoolPtrOutput `pulumi:"backchannelSupported"`
	// The display name for the realm that is shown when logging in to the admin console.
	DisplayName pulumi.StringPtrOutput `pulumi:"displayName"`
	// When `false`, users and clients will not be able to access this realm. Defaults to `true`.
	Enabled pulumi.BoolPtrOutput `pulumi:"enabled"`
	// The Entity ID that will be used to uniquely identify this SAML Service Provider.
	EntityId    pulumi.StringOutput    `pulumi:"entityId"`
	ExtraConfig pulumi.StringMapOutput `pulumi:"extraConfig"`
	// Alias of authentication flow, which is triggered after first login with this identity provider. Term 'First Login' means that there is not yet existing Keycloak account linked with the authenticated identity provider account. Defaults to `first broker login`.
	FirstBrokerLoginFlowAlias pulumi.StringPtrOutput `pulumi:"firstBrokerLoginFlowAlias"`
	// Indicates whether the identity provider must authenticate the presenter directly rather than rely on a previous security context.
	ForceAuthn pulumi.BoolPtrOutput `pulumi:"forceAuthn"`
	// A number defining the order of this identity provider in the GUI.
	GuiOrder pulumi.StringPtrOutput `pulumi:"guiOrder"`
	// If hidden, then login with this provider is possible only if requested explicitly, e.g. using the 'kc_idp_hint' parameter.
	HideOnLoginPage pulumi.BoolPtrOutput `pulumi:"hideOnLoginPage"`
	// Internal Identity Provider Id
	InternalId pulumi.StringOutput `pulumi:"internalId"`
	// When `true`, users cannot login using this provider, but their existing accounts will be linked when possible. Defaults to `false`.
	LinkOnly pulumi.BoolPtrOutput `pulumi:"linkOnly"`
	// Login Hint.
	LoginHint pulumi.StringPtrOutput `pulumi:"loginHint"`
	// Specifies the URI reference corresponding to a name identifier format. Defaults to empty.
	NameIdPolicyFormat pulumi.StringPtrOutput `pulumi:"nameIdPolicyFormat"`
	// Indicates whether the AuthnRequest must be sent using HTTP-POST binding. If false, HTTP-REDIRECT binding will be used.
	PostBindingAuthnRequest pulumi.BoolPtrOutput `pulumi:"postBindingAuthnRequest"`
	// Indicates whether to respond to requests using HTTP-POST binding. If false, HTTP-REDIRECT binding will be used.
	PostBindingLogout pulumi.BoolPtrOutput `pulumi:"postBindingLogout"`
	// Indicates whether to respond to requests using HTTP-POST binding. If false, HTTP-REDIRECT binding will be used..
	PostBindingResponse pulumi.BoolPtrOutput `pulumi:"postBindingResponse"`
	// Alias of authentication flow, which is triggered after each login with this identity provider. Useful if you want additional verification of each user authenticated with this identity provider (for example OTP). Leave this empty if you don't want any additional authenticators to be triggered after login with this identity provider. Also note, that authenticator implementations must assume that user is already set in ClientSession as identity provider already set it. Defaults to empty.
	PostBrokerLoginFlowAlias pulumi.StringPtrOutput `pulumi:"postBrokerLoginFlowAlias"`
	// The principal attribute.
	PrincipalAttribute pulumi.StringPtrOutput `pulumi:"principalAttribute"`
	// The principal type. Can be one of `SUBJECT`, `ATTRIBUTE` or `FRIENDLY_ATTRIBUTE`.
	PrincipalType pulumi.StringPtrOutput `pulumi:"principalType"`
	// The ID of the identity provider to use. Defaults to `saml`, which should be used unless you have extended Keycloak and provided your own implementation.
	ProviderId pulumi.StringPtrOutput `pulumi:"providerId"`
	// The name of the realm. This is unique across Keycloak.
	Realm pulumi.StringOutput `pulumi:"realm"`
	// Signing Algorithm. Defaults to empty.
	SignatureAlgorithm pulumi.StringPtrOutput `pulumi:"signatureAlgorithm"`
	// Signing Certificate.
	SigningCertificate pulumi.StringPtrOutput `pulumi:"signingCertificate"`
	// The Url that must be used to send logout requests.
	SingleLogoutServiceUrl pulumi.StringPtrOutput `pulumi:"singleLogoutServiceUrl"`
	// The Url that must be used to send authentication requests (SAML AuthnRequest).
	SingleSignOnServiceUrl pulumi.StringOutput `pulumi:"singleSignOnServiceUrl"`
	// When `true`, tokens will be stored after authenticating users. Defaults to `true`.
	StoreToken pulumi.BoolPtrOutput `pulumi:"storeToken"`
	// The default sync mode to use for all mappers attached to this identity provider. Can be one of `IMPORT`, `FORCE`, or `LEGACY`.
	SyncMode pulumi.StringPtrOutput `pulumi:"syncMode"`
	// When `true`, email addresses for users in this provider will automatically be verified regardless of the realm's email verification policy. Defaults to `false`.
	TrustEmail pulumi.BoolPtrOutput `pulumi:"trustEmail"`
	// Enable/disable signature validation of SAML responses.
	ValidateSignature pulumi.BoolPtrOutput `pulumi:"validateSignature"`
	// Indicates whether this service provider expects an encrypted Assertion.
	WantAssertionsEncrypted pulumi.BoolPtrOutput `pulumi:"wantAssertionsEncrypted"`
	// Indicates whether this service provider expects a signed Assertion.
	WantAssertionsSigned pulumi.BoolPtrOutput `pulumi:"wantAssertionsSigned"`
	// The SAML signature key name. Can be one of `NONE`, `KEY_ID`, or `CERT_SUBJECT`.
	XmlSignKeyInfoKeyNameTransformer pulumi.StringPtrOutput `pulumi:"xmlSignKeyInfoKeyNameTransformer"`
}

Allows for creating and managing SAML Identity Providers within Keycloak.

SAML (Security Assertion Markup Language) identity providers allows users to authenticate through a third-party system using the SAML protocol.

## Example Usage

```go package main

import ( 

"github.com/pulumi/pulumi-keycloak/sdk/v5/go/keycloak"
"github.com/pulumi/pulumi-keycloak/sdk/v5/go/keycloak/saml"
"github.com/pulumi/pulumi/sdk/v3/go/pulumi"

) 

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		realm, err := keycloak.NewRealm(ctx, "realm", &keycloak.RealmArgs{
			Realm:   pulumi.String("my-realm"),
			Enabled: pulumi.Bool(true),
		})
		if err != nil {
			return err
		}
		_, err = saml.NewIdentityProvider(ctx, "realm_saml_identity_provider", &saml.IdentityProviderArgs{
			Realm:                   realm.ID(),
			Alias:                   pulumi.String("my-saml-idp"),
			EntityId:                pulumi.String("https://domain.com/entity_id"),
			SingleSignOnServiceUrl:  pulumi.String("https://domain.com/adfs/ls/"),
			SingleLogoutServiceUrl:  pulumi.String("https://domain.com/adfs/ls/?wa=wsignout1.0"),
			BackchannelSupported:    pulumi.Bool(true),
			PostBindingResponse:     pulumi.Bool(true),
			PostBindingLogout:       pulumi.Bool(true),
			PostBindingAuthnRequest: pulumi.Bool(true),
			StoreToken:              pulumi.Bool(false),
			TrustEmail:              pulumi.Bool(true),
			ForceAuthn:              pulumi.Bool(true),
		})
		if err != nil {
			return err
		}
		return nil
	})
}

```

## Import

Identity providers can be imported using the format `{{realm_id}}/{{idp_alias}}`, where `idp_alias` is the identity provider alias.

Example:

bash

```sh $ pulumi import keycloak:saml/identityProvider:IdentityProvider realm_saml_identity_provider my-realm/my-saml-idp ```

func GetIdentityProvider 

func GetIdentityProvider(ctx *pulumi.Context,
	name string, id pulumi.IDInput, state *IdentityProviderState, opts ...pulumi.ResourceOption) (*IdentityProvider, error)

GetIdentityProvider gets an existing IdentityProvider resource's state with the given name, ID, and optional state properties that are used to uniquely qualify the lookup (nil if not required).

func NewIdentityProvider 

func NewIdentityProvider(ctx *pulumi.Context,
	name string, args *IdentityProviderArgs, opts ...pulumi.ResourceOption) (*IdentityProvider, error)

NewIdentityProvider registers a new resource with the given unique name, arguments, and options.

func (*IdentityProvider) ElementType 

func (*IdentityProvider) ElementType() reflect.Type

func (*IdentityProvider) ToIdentityProviderOutput 

func (i *IdentityProvider) ToIdentityProviderOutput() IdentityProviderOutput

func (*IdentityProvider) ToIdentityProviderOutputWithContext 

func (i *IdentityProvider) ToIdentityProviderOutputWithContext(ctx context.Context) IdentityProviderOutput

type IdentityProviderArgs 

type IdentityProviderArgs struct {
	// When `true`, new users will be able to read stored tokens. This will automatically assign the `broker.read-token` role. Defaults to `false`.
	AddReadTokenRoleOnCreate pulumi.BoolPtrInput
	// The unique name of identity provider.
	Alias pulumi.StringInput
	// Authenticate users by default. Defaults to `false`.
	AuthenticateByDefault pulumi.BoolPtrInput
	// Ordered list of requested AuthnContext ClassRefs.
	AuthnContextClassRefs pulumi.StringArrayInput
	// Specifies the comparison method used to evaluate the requested context classes or statements.
	AuthnContextComparisonType pulumi.StringPtrInput
	// Ordered list of requested AuthnContext DeclRefs.
	AuthnContextDeclRefs pulumi.StringArrayInput
	// Does the external IDP support backchannel logout?. Defaults to `false`.
	BackchannelSupported pulumi.BoolPtrInput
	// The display name for the realm that is shown when logging in to the admin console.
	DisplayName pulumi.StringPtrInput
	// When `false`, users and clients will not be able to access this realm. Defaults to `true`.
	Enabled pulumi.BoolPtrInput
	// The Entity ID that will be used to uniquely identify this SAML Service Provider.
	EntityId    pulumi.StringInput
	ExtraConfig pulumi.StringMapInput
	// Alias of authentication flow, which is triggered after first login with this identity provider. Term 'First Login' means that there is not yet existing Keycloak account linked with the authenticated identity provider account. Defaults to `first broker login`.
	FirstBrokerLoginFlowAlias pulumi.StringPtrInput
	// Indicates whether the identity provider must authenticate the presenter directly rather than rely on a previous security context.
	ForceAuthn pulumi.BoolPtrInput
	// A number defining the order of this identity provider in the GUI.
	GuiOrder pulumi.StringPtrInput
	// If hidden, then login with this provider is possible only if requested explicitly, e.g. using the 'kc_idp_hint' parameter.
	HideOnLoginPage pulumi.BoolPtrInput
	// When `true`, users cannot login using this provider, but their existing accounts will be linked when possible. Defaults to `false`.
	LinkOnly pulumi.BoolPtrInput
	// Login Hint.
	LoginHint pulumi.StringPtrInput
	// Specifies the URI reference corresponding to a name identifier format. Defaults to empty.
	NameIdPolicyFormat pulumi.StringPtrInput
	// Indicates whether the AuthnRequest must be sent using HTTP-POST binding. If false, HTTP-REDIRECT binding will be used.
	PostBindingAuthnRequest pulumi.BoolPtrInput
	// Indicates whether to respond to requests using HTTP-POST binding. If false, HTTP-REDIRECT binding will be used.
	PostBindingLogout pulumi.BoolPtrInput
	// Indicates whether to respond to requests using HTTP-POST binding. If false, HTTP-REDIRECT binding will be used..
	PostBindingResponse pulumi.BoolPtrInput
	// Alias of authentication flow, which is triggered after each login with this identity provider. Useful if you want additional verification of each user authenticated with this identity provider (for example OTP). Leave this empty if you don't want any additional authenticators to be triggered after login with this identity provider. Also note, that authenticator implementations must assume that user is already set in ClientSession as identity provider already set it. Defaults to empty.
	PostBrokerLoginFlowAlias pulumi.StringPtrInput
	// The principal attribute.
	PrincipalAttribute pulumi.StringPtrInput
	// The principal type. Can be one of `SUBJECT`, `ATTRIBUTE` or `FRIENDLY_ATTRIBUTE`.
	PrincipalType pulumi.StringPtrInput
	// The ID of the identity provider to use. Defaults to `saml`, which should be used unless you have extended Keycloak and provided your own implementation.
	ProviderId pulumi.StringPtrInput
	// The name of the realm. This is unique across Keycloak.
	Realm pulumi.StringInput
	// Signing Algorithm. Defaults to empty.
	SignatureAlgorithm pulumi.StringPtrInput
	// Signing Certificate.
	SigningCertificate pulumi.StringPtrInput
	// The Url that must be used to send logout requests.
	SingleLogoutServiceUrl pulumi.StringPtrInput
	// The Url that must be used to send authentication requests (SAML AuthnRequest).
	SingleSignOnServiceUrl pulumi.StringInput
	// When `true`, tokens will be stored after authenticating users. Defaults to `true`.
	StoreToken pulumi.BoolPtrInput
	// The default sync mode to use for all mappers attached to this identity provider. Can be one of `IMPORT`, `FORCE`, or `LEGACY`.
	SyncMode pulumi.StringPtrInput
	// When `true`, email addresses for users in this provider will automatically be verified regardless of the realm's email verification policy. Defaults to `false`.
	TrustEmail pulumi.BoolPtrInput
	// Enable/disable signature validation of SAML responses.
	ValidateSignature pulumi.BoolPtrInput
	// Indicates whether this service provider expects an encrypted Assertion.
	WantAssertionsEncrypted pulumi.BoolPtrInput
	// Indicates whether this service provider expects a signed Assertion.
	WantAssertionsSigned pulumi.BoolPtrInput
	// The SAML signature key name. Can be one of `NONE`, `KEY_ID`, or `CERT_SUBJECT`.
	XmlSignKeyInfoKeyNameTransformer pulumi.StringPtrInput
}

The set of arguments for constructing a IdentityProvider resource.

func (IdentityProviderArgs) ElementType 

func (IdentityProviderArgs) ElementType() reflect.Type

type IdentityProviderArray 

type IdentityProviderArray []IdentityProviderInput

func (IdentityProviderArray) ElementType 

func (IdentityProviderArray) ElementType() reflect.Type

func (IdentityProviderArray) ToIdentityProviderArrayOutput 

func (i IdentityProviderArray) ToIdentityProviderArrayOutput() IdentityProviderArrayOutput

func (IdentityProviderArray) ToIdentityProviderArrayOutputWithContext 

func (i IdentityProviderArray) ToIdentityProviderArrayOutputWithContext(ctx context.Context) IdentityProviderArrayOutput

type IdentityProviderArrayInput 

type IdentityProviderArrayInput interface {
	pulumi.Input

	ToIdentityProviderArrayOutput() IdentityProviderArrayOutput
	ToIdentityProviderArrayOutputWithContext(context.Context) IdentityProviderArrayOutput
}

IdentityProviderArrayInput is an input type that accepts IdentityProviderArray and IdentityProviderArrayOutput values. You can construct a concrete instance of `IdentityProviderArrayInput` via: 

IdentityProviderArray{ IdentityProviderArgs{...} }

type IdentityProviderArrayOutput 

type IdentityProviderArrayOutput struct{ *pulumi.OutputState }

func (IdentityProviderArrayOutput) ElementType 

func (IdentityProviderArrayOutput) ElementType() reflect.Type

func (IdentityProviderArrayOutput) Index 

func (o IdentityProviderArrayOutput) Index(i pulumi.IntInput) IdentityProviderOutput

func (IdentityProviderArrayOutput) ToIdentityProviderArrayOutput 

func (o IdentityProviderArrayOutput) ToIdentityProviderArrayOutput() IdentityProviderArrayOutput

func (IdentityProviderArrayOutput) ToIdentityProviderArrayOutputWithContext 

func (o IdentityProviderArrayOutput) ToIdentityProviderArrayOutputWithContext(ctx context.Context) IdentityProviderArrayOutput

type IdentityProviderInput 

type IdentityProviderInput interface {
	pulumi.Input

	ToIdentityProviderOutput() IdentityProviderOutput
	ToIdentityProviderOutputWithContext(ctx context.Context) IdentityProviderOutput
}

type IdentityProviderMap 

type IdentityProviderMap map[string]IdentityProviderInput

func (IdentityProviderMap) ElementType 

func (IdentityProviderMap) ElementType() reflect.Type

func (IdentityProviderMap) ToIdentityProviderMapOutput 

func (i IdentityProviderMap) ToIdentityProviderMapOutput() IdentityProviderMapOutput

func (IdentityProviderMap) ToIdentityProviderMapOutputWithContext 

func (i IdentityProviderMap) ToIdentityProviderMapOutputWithContext(ctx context.Context) IdentityProviderMapOutput

type IdentityProviderMapInput 

type IdentityProviderMapInput interface {
	pulumi.Input

	ToIdentityProviderMapOutput() IdentityProviderMapOutput
	ToIdentityProviderMapOutputWithContext(context.Context) IdentityProviderMapOutput
}

IdentityProviderMapInput is an input type that accepts IdentityProviderMap and IdentityProviderMapOutput values. You can construct a concrete instance of `IdentityProviderMapInput` via: 

IdentityProviderMap{ "key": IdentityProviderArgs{...} }

type IdentityProviderMapOutput 

type IdentityProviderMapOutput struct{ *pulumi.OutputState }

func (IdentityProviderMapOutput) ElementType 

func (IdentityProviderMapOutput) ElementType() reflect.Type

func (IdentityProviderMapOutput) MapIndex 

func (o IdentityProviderMapOutput) MapIndex(k pulumi.StringInput) IdentityProviderOutput

func (IdentityProviderMapOutput) ToIdentityProviderMapOutput 

func (o IdentityProviderMapOutput) ToIdentityProviderMapOutput() IdentityProviderMapOutput

func (IdentityProviderMapOutput) ToIdentityProviderMapOutputWithContext 

func (o IdentityProviderMapOutput) ToIdentityProviderMapOutputWithContext(ctx context.Context) IdentityProviderMapOutput

type IdentityProviderOutput 

type IdentityProviderOutput struct{ *pulumi.OutputState }

func (IdentityProviderOutput) AddReadTokenRoleOnCreate 

func (o IdentityProviderOutput) AddReadTokenRoleOnCreate() pulumi.BoolPtrOutput

When `true`, new users will be able to read stored tokens. This will automatically assign the `broker.read-token` role. Defaults to `false`.

func (IdentityProviderOutput) Alias 

func (o IdentityProviderOutput) Alias() pulumi.StringOutput

The unique name of identity provider.

func (IdentityProviderOutput) AuthenticateByDefault 

func (o IdentityProviderOutput) AuthenticateByDefault() pulumi.BoolPtrOutput

Authenticate users by default. Defaults to `false`.

func (IdentityProviderOutput) AuthnContextClassRefs 

func (o IdentityProviderOutput) AuthnContextClassRefs() pulumi.StringArrayOutput

Ordered list of requested AuthnContext ClassRefs.

func (IdentityProviderOutput) AuthnContextComparisonType 

func (o IdentityProviderOutput) AuthnContextComparisonType() pulumi.StringPtrOutput

Specifies the comparison method used to evaluate the requested context classes or statements.

func (IdentityProviderOutput) AuthnContextDeclRefs 

func (o IdentityProviderOutput) AuthnContextDeclRefs() pulumi.StringArrayOutput

Ordered list of requested AuthnContext DeclRefs.

func (IdentityProviderOutput) BackchannelSupported 

func (o IdentityProviderOutput) BackchannelSupported() pulumi.BoolPtrOutput

Does the external IDP support backchannel logout?. Defaults to `false`.

func (IdentityProviderOutput) DisplayName 

func (o IdentityProviderOutput) DisplayName() pulumi.StringPtrOutput

The display name for the realm that is shown when logging in to the admin console.

func (IdentityProviderOutput) ElementType 

func (IdentityProviderOutput) ElementType() reflect.Type

func (IdentityProviderOutput) Enabled 

func (o IdentityProviderOutput) Enabled() pulumi.BoolPtrOutput

When `false`, users and clients will not be able to access this realm. Defaults to `true`.

func (IdentityProviderOutput) EntityId 

func (o IdentityProviderOutput) EntityId() pulumi.StringOutput

The Entity ID that will be used to uniquely identify this SAML Service Provider.

func (IdentityProviderOutput) ExtraConfig 

func (o IdentityProviderOutput) ExtraConfig() pulumi.StringMapOutput

func (IdentityProviderOutput) FirstBrokerLoginFlowAlias 

func (o IdentityProviderOutput) FirstBrokerLoginFlowAlias() pulumi.StringPtrOutput

Alias of authentication flow, which is triggered after first login with this identity provider. Term 'First Login' means that there is not yet existing Keycloak account linked with the authenticated identity provider account. Defaults to `first broker login`.

func (IdentityProviderOutput) ForceAuthn 

func (o IdentityProviderOutput) ForceAuthn() pulumi.BoolPtrOutput

Indicates whether the identity provider must authenticate the presenter directly rather than rely on a previous security context.

func (IdentityProviderOutput) GuiOrder 

func (o IdentityProviderOutput) GuiOrder() pulumi.StringPtrOutput

A number defining the order of this identity provider in the GUI.

func (IdentityProviderOutput) HideOnLoginPage 

func (o IdentityProviderOutput) HideOnLoginPage() pulumi.BoolPtrOutput

If hidden, then login with this provider is possible only if requested explicitly, e.g. using the 'kc_idp_hint' parameter.

func (IdentityProviderOutput) InternalId 

func (o IdentityProviderOutput) InternalId() pulumi.StringOutput

Internal Identity Provider Id

func (IdentityProviderOutput) LinkOnly 

func (o IdentityProviderOutput) LinkOnly() pulumi.BoolPtrOutput

When `true`, users cannot login using this provider, but their existing accounts will be linked when possible. Defaults to `false`.

func (IdentityProviderOutput) LoginHint added in v5.2.0 

func (o IdentityProviderOutput) LoginHint() pulumi.StringPtrOutput

Login Hint.

func (IdentityProviderOutput) NameIdPolicyFormat 

func (o IdentityProviderOutput) NameIdPolicyFormat() pulumi.StringPtrOutput

Specifies the URI reference corresponding to a name identifier format. Defaults to empty.

func (IdentityProviderOutput) PostBindingAuthnRequest 

func (o IdentityProviderOutput) PostBindingAuthnRequest() pulumi.BoolPtrOutput

Indicates whether the AuthnRequest must be sent using HTTP-POST binding. If false, HTTP-REDIRECT binding will be used.

func (IdentityProviderOutput) PostBindingLogout 

func (o IdentityProviderOutput) PostBindingLogout() pulumi.BoolPtrOutput

Indicates whether to respond to requests using HTTP-POST binding. If false, HTTP-REDIRECT binding will be used.

func (IdentityProviderOutput) PostBindingResponse 

func (o IdentityProviderOutput) PostBindingResponse() pulumi.BoolPtrOutput

Indicates whether to respond to requests using HTTP-POST binding. If false, HTTP-REDIRECT binding will be used..

func (IdentityProviderOutput) PostBrokerLoginFlowAlias 

func (o IdentityProviderOutput) PostBrokerLoginFlowAlias() pulumi.StringPtrOutput

Alias of authentication flow, which is triggered after each login with this identity provider. Useful if you want additional verification of each user authenticated with this identity provider (for example OTP). Leave this empty if you don't want any additional authenticators to be triggered after login with this identity provider. Also note, that authenticator implementations must assume that user is already set in ClientSession as identity provider already set it. Defaults to empty.

func (IdentityProviderOutput) PrincipalAttribute 

func (o IdentityProviderOutput) PrincipalAttribute() pulumi.StringPtrOutput

The principal attribute.

func (IdentityProviderOutput) PrincipalType 

func (o IdentityProviderOutput) PrincipalType() pulumi.StringPtrOutput

The principal type. Can be one of `SUBJECT`, `ATTRIBUTE` or `FRIENDLY_ATTRIBUTE`.

func (IdentityProviderOutput) ProviderId 

func (o IdentityProviderOutput) ProviderId() pulumi.StringPtrOutput

The ID of the identity provider to use. Defaults to `saml`, which should be used unless you have extended Keycloak and provided your own implementation.

func (IdentityProviderOutput) Realm 

func (o IdentityProviderOutput) Realm() pulumi.StringOutput

The name of the realm. This is unique across Keycloak.

func (IdentityProviderOutput) SignatureAlgorithm 

func (o IdentityProviderOutput) SignatureAlgorithm() pulumi.StringPtrOutput

Signing Algorithm. Defaults to empty.

func (IdentityProviderOutput) SigningCertificate 

func (o IdentityProviderOutput) SigningCertificate() pulumi.StringPtrOutput

Signing Certificate.

func (IdentityProviderOutput) SingleLogoutServiceUrl 

func (o IdentityProviderOutput) SingleLogoutServiceUrl() pulumi.StringPtrOutput

The Url that must be used to send logout requests.

func (IdentityProviderOutput) SingleSignOnServiceUrl 

func (o IdentityProviderOutput) SingleSignOnServiceUrl() pulumi.StringOutput

The Url that must be used to send authentication requests (SAML AuthnRequest).

func (IdentityProviderOutput) StoreToken 

func (o IdentityProviderOutput) StoreToken() pulumi.BoolPtrOutput

When `true`, tokens will be stored after authenticating users. Defaults to `true`.

func (IdentityProviderOutput) SyncMode 

func (o IdentityProviderOutput) SyncMode() pulumi.StringPtrOutput

The default sync mode to use for all mappers attached to this identity provider. Can be one of `IMPORT`, `FORCE`, or `LEGACY`.

func (IdentityProviderOutput) ToIdentityProviderOutput 

func (o IdentityProviderOutput) ToIdentityProviderOutput() IdentityProviderOutput

func (IdentityProviderOutput) ToIdentityProviderOutputWithContext 

func (o IdentityProviderOutput) ToIdentityProviderOutputWithContext(ctx context.Context) IdentityProviderOutput

func (IdentityProviderOutput) TrustEmail 

func (o IdentityProviderOutput) TrustEmail() pulumi.BoolPtrOutput

When `true`, email addresses for users in this provider will automatically be verified regardless of the realm's email verification policy. Defaults to `false`.

func (IdentityProviderOutput) ValidateSignature 

func (o IdentityProviderOutput) ValidateSignature() pulumi.BoolPtrOutput

Enable/disable signature validation of SAML responses.

func (IdentityProviderOutput) WantAssertionsEncrypted 

func (o IdentityProviderOutput) WantAssertionsEncrypted() pulumi.BoolPtrOutput

Indicates whether this service provider expects an encrypted Assertion.

func (IdentityProviderOutput) WantAssertionsSigned 

func (o IdentityProviderOutput) WantAssertionsSigned() pulumi.BoolPtrOutput

Indicates whether this service provider expects a signed Assertion.

func (IdentityProviderOutput) XmlSignKeyInfoKeyNameTransformer 

func (o IdentityProviderOutput) XmlSignKeyInfoKeyNameTransformer() pulumi.StringPtrOutput

The SAML signature key name. Can be one of `NONE`, `KEY_ID`, or `CERT_SUBJECT`.

type IdentityProviderState 

type IdentityProviderState struct {
	// When `true`, new users will be able to read stored tokens. This will automatically assign the `broker.read-token` role. Defaults to `false`.
	AddReadTokenRoleOnCreate pulumi.BoolPtrInput
	// The unique name of identity provider.
	Alias pulumi.StringPtrInput
	// Authenticate users by default. Defaults to `false`.
	AuthenticateByDefault pulumi.BoolPtrInput
	// Ordered list of requested AuthnContext ClassRefs.
	AuthnContextClassRefs pulumi.StringArrayInput
	// Specifies the comparison method used to evaluate the requested context classes or statements.
	AuthnContextComparisonType pulumi.StringPtrInput
	// Ordered list of requested AuthnContext DeclRefs.
	AuthnContextDeclRefs pulumi.StringArrayInput
	// Does the external IDP support backchannel logout?. Defaults to `false`.
	BackchannelSupported pulumi.BoolPtrInput
	// The display name for the realm that is shown when logging in to the admin console.
	DisplayName pulumi.StringPtrInput
	// When `false`, users and clients will not be able to access this realm. Defaults to `true`.
	Enabled pulumi.BoolPtrInput
	// The Entity ID that will be used to uniquely identify this SAML Service Provider.
	EntityId    pulumi.StringPtrInput
	ExtraConfig pulumi.StringMapInput
	// Alias of authentication flow, which is triggered after first login with this identity provider. Term 'First Login' means that there is not yet existing Keycloak account linked with the authenticated identity provider account. Defaults to `first broker login`.
	FirstBrokerLoginFlowAlias pulumi.StringPtrInput
	// Indicates whether the identity provider must authenticate the presenter directly rather than rely on a previous security context.
	ForceAuthn pulumi.BoolPtrInput
	// A number defining the order of this identity provider in the GUI.
	GuiOrder pulumi.StringPtrInput
	// If hidden, then login with this provider is possible only if requested explicitly, e.g. using the 'kc_idp_hint' parameter.
	HideOnLoginPage pulumi.BoolPtrInput
	// Internal Identity Provider Id
	InternalId pulumi.StringPtrInput
	// When `true`, users cannot login using this provider, but their existing accounts will be linked when possible. Defaults to `false`.
	LinkOnly pulumi.BoolPtrInput
	// Login Hint.
	LoginHint pulumi.StringPtrInput
	// Specifies the URI reference corresponding to a name identifier format. Defaults to empty.
	NameIdPolicyFormat pulumi.StringPtrInput
	// Indicates whether the AuthnRequest must be sent using HTTP-POST binding. If false, HTTP-REDIRECT binding will be used.
	PostBindingAuthnRequest pulumi.BoolPtrInput
	// Indicates whether to respond to requests using HTTP-POST binding. If false, HTTP-REDIRECT binding will be used.
	PostBindingLogout pulumi.BoolPtrInput
	// Indicates whether to respond to requests using HTTP-POST binding. If false, HTTP-REDIRECT binding will be used..
	PostBindingResponse pulumi.BoolPtrInput
	// Alias of authentication flow, which is triggered after each login with this identity provider. Useful if you want additional verification of each user authenticated with this identity provider (for example OTP). Leave this empty if you don't want any additional authenticators to be triggered after login with this identity provider. Also note, that authenticator implementations must assume that user is already set in ClientSession as identity provider already set it. Defaults to empty.
	PostBrokerLoginFlowAlias pulumi.StringPtrInput
	// The principal attribute.
	PrincipalAttribute pulumi.StringPtrInput
	// The principal type. Can be one of `SUBJECT`, `ATTRIBUTE` or `FRIENDLY_ATTRIBUTE`.
	PrincipalType pulumi.StringPtrInput
	// The ID of the identity provider to use. Defaults to `saml`, which should be used unless you have extended Keycloak and provided your own implementation.
	ProviderId pulumi.StringPtrInput
	// The name of the realm. This is unique across Keycloak.
	Realm pulumi.StringPtrInput
	// Signing Algorithm. Defaults to empty.
	SignatureAlgorithm pulumi.StringPtrInput
	// Signing Certificate.
	SigningCertificate pulumi.StringPtrInput
	// The Url that must be used to send logout requests.
	SingleLogoutServiceUrl pulumi.StringPtrInput
	// The Url that must be used to send authentication requests (SAML AuthnRequest).
	SingleSignOnServiceUrl pulumi.StringPtrInput
	// When `true`, tokens will be stored after authenticating users. Defaults to `true`.
	StoreToken pulumi.BoolPtrInput
	// The default sync mode to use for all mappers attached to this identity provider. Can be one of `IMPORT`, `FORCE`, or `LEGACY`.
	SyncMode pulumi.StringPtrInput
	// When `true`, email addresses for users in this provider will automatically be verified regardless of the realm's email verification policy. Defaults to `false`.
	TrustEmail pulumi.BoolPtrInput
	// Enable/disable signature validation of SAML responses.
	ValidateSignature pulumi.BoolPtrInput
	// Indicates whether this service provider expects an encrypted Assertion.
	WantAssertionsEncrypted pulumi.BoolPtrInput
	// Indicates whether this service provider expects a signed Assertion.
	WantAssertionsSigned pulumi.BoolPtrInput
	// The SAML signature key name. Can be one of `NONE`, `KEY_ID`, or `CERT_SUBJECT`.
	XmlSignKeyInfoKeyNameTransformer pulumi.StringPtrInput
}

func (IdentityProviderState) ElementType 

func (IdentityProviderState) ElementType() reflect.Type

type LookupClientArgs 

type LookupClientArgs struct {
	// The client id (not its unique ID).
	ClientId string `pulumi:"clientId"`
	// The realm id.
	RealmId string `pulumi:"realmId"`
}

A collection of arguments for invoking getClient.

type LookupClientOutputArgs 

type LookupClientOutputArgs struct {
	// The client id (not its unique ID).
	ClientId pulumi.StringInput `pulumi:"clientId"`
	// The realm id.
	RealmId pulumi.StringInput `pulumi:"realmId"`
}

A collection of arguments for invoking getClient.

func (LookupClientOutputArgs) ElementType 

func (LookupClientOutputArgs) ElementType() reflect.Type

type LookupClientResult 

type LookupClientResult struct {
	AssertionConsumerPostUrl           string                                       `pulumi:"assertionConsumerPostUrl"`
	AssertionConsumerRedirectUrl       string                                       `pulumi:"assertionConsumerRedirectUrl"`
	AuthenticationFlowBindingOverrides []GetClientAuthenticationFlowBindingOverride `pulumi:"authenticationFlowBindingOverrides"`
	BaseUrl                            string                                       `pulumi:"baseUrl"`
	CanonicalizationMethod             string                                       `pulumi:"canonicalizationMethod"`
	ClientId                           string                                       `pulumi:"clientId"`
	ClientSignatureRequired            bool                                         `pulumi:"clientSignatureRequired"`
	Description                        string                                       `pulumi:"description"`
	Enabled                            bool                                         `pulumi:"enabled"`
	EncryptAssertions                  bool                                         `pulumi:"encryptAssertions"`
	EncryptionCertificate              string                                       `pulumi:"encryptionCertificate"`
	EncryptionCertificateSha1          string                                       `pulumi:"encryptionCertificateSha1"`
	ExtraConfig                        map[string]string                            `pulumi:"extraConfig"`
	ForceNameIdFormat                  bool                                         `pulumi:"forceNameIdFormat"`
	ForcePostBinding                   bool                                         `pulumi:"forcePostBinding"`
	FrontChannelLogout                 bool                                         `pulumi:"frontChannelLogout"`
	FullScopeAllowed                   bool                                         `pulumi:"fullScopeAllowed"`
	// The provider-assigned unique ID for this managed resource.
	Id                              string   `pulumi:"id"`
	IdpInitiatedSsoRelayState       string   `pulumi:"idpInitiatedSsoRelayState"`
	IdpInitiatedSsoUrlName          string   `pulumi:"idpInitiatedSsoUrlName"`
	IncludeAuthnStatement           bool     `pulumi:"includeAuthnStatement"`
	LoginTheme                      string   `pulumi:"loginTheme"`
	LogoutServicePostBindingUrl     string   `pulumi:"logoutServicePostBindingUrl"`
	LogoutServiceRedirectBindingUrl string   `pulumi:"logoutServiceRedirectBindingUrl"`
	MasterSamlProcessingUrl         string   `pulumi:"masterSamlProcessingUrl"`
	Name                            string   `pulumi:"name"`
	NameIdFormat                    string   `pulumi:"nameIdFormat"`
	RealmId                         string   `pulumi:"realmId"`
	RootUrl                         string   `pulumi:"rootUrl"`
	SamlSignatureKeyName            string   `pulumi:"samlSignatureKeyName"`
	SignAssertions                  bool     `pulumi:"signAssertions"`
	SignDocuments                   bool     `pulumi:"signDocuments"`
	SignatureAlgorithm              string   `pulumi:"signatureAlgorithm"`
	SignatureKeyName                string   `pulumi:"signatureKeyName"`
	SigningCertificate              string   `pulumi:"signingCertificate"`
	SigningCertificateSha1          string   `pulumi:"signingCertificateSha1"`
	SigningPrivateKey               string   `pulumi:"signingPrivateKey"`
	SigningPrivateKeySha1           string   `pulumi:"signingPrivateKeySha1"`
	ValidRedirectUris               []string `pulumi:"validRedirectUris"`
}

A collection of values returned by getClient.

func LookupClient 

func LookupClient(ctx *pulumi.Context, args *LookupClientArgs, opts ...pulumi.InvokeOption) (*LookupClientResult, error)

This data source can be used to fetch properties of a Keycloak client that uses the SAML protocol.

## Example Usage

```go package main

import ( 

"github.com/pulumi/pulumi-keycloak/sdk/v5/go/keycloak"
"github.com/pulumi/pulumi-keycloak/sdk/v5/go/keycloak/saml"
"github.com/pulumi/pulumi/sdk/v3/go/pulumi"

) 

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		realmManagement, err := saml.LookupClient(ctx, &saml.LookupClientArgs{
			RealmId:  "my-realm",
			ClientId: "realm-management",
		}, nil)
		if err != nil {
			return err
		}
		// use the data source
		_, err = keycloak.LookupRole(ctx, &keycloak.LookupRoleArgs{
			RealmId:  "my-realm",
			ClientId: pulumi.StringRef(realmManagement.Id),
			Name:     "realm-admin",
		}, nil)
		if err != nil {
			return err
		}
		return nil
	})
}

```

type LookupClientResultOutput 

type LookupClientResultOutput struct{ *pulumi.OutputState }

A collection of values returned by getClient.

func LookupClientOutput 

func LookupClientOutput(ctx *pulumi.Context, args LookupClientOutputArgs, opts ...pulumi.InvokeOption) LookupClientResultOutput

func (LookupClientResultOutput) AssertionConsumerPostUrl 

func (o LookupClientResultOutput) AssertionConsumerPostUrl() pulumi.StringOutput

func (LookupClientResultOutput) AssertionConsumerRedirectUrl 

func (o LookupClientResultOutput) AssertionConsumerRedirectUrl() pulumi.StringOutput

func (LookupClientResultOutput) AuthenticationFlowBindingOverrides 

func (o LookupClientResultOutput) AuthenticationFlowBindingOverrides() GetClientAuthenticationFlowBindingOverrideArrayOutput

func (LookupClientResultOutput) BaseUrl 

func (o LookupClientResultOutput) BaseUrl() pulumi.StringOutput

func (LookupClientResultOutput) CanonicalizationMethod 

func (o LookupClientResultOutput) CanonicalizationMethod() pulumi.StringOutput

func (LookupClientResultOutput) ClientId 

func (o LookupClientResultOutput) ClientId() pulumi.StringOutput

func (LookupClientResultOutput) ClientSignatureRequired 

func (o LookupClientResultOutput) ClientSignatureRequired() pulumi.BoolOutput

func (LookupClientResultOutput) Description 

func (o LookupClientResultOutput) Description() pulumi.StringOutput

func (LookupClientResultOutput) ElementType 

func (LookupClientResultOutput) ElementType() reflect.Type

func (LookupClientResultOutput) Enabled 

func (o LookupClientResultOutput) Enabled() pulumi.BoolOutput

func (LookupClientResultOutput) EncryptAssertions 

func (o LookupClientResultOutput) EncryptAssertions() pulumi.BoolOutput

func (LookupClientResultOutput) EncryptionCertificate 

func (o LookupClientResultOutput) EncryptionCertificate() pulumi.StringOutput

func (LookupClientResultOutput) EncryptionCertificateSha1 

func (o LookupClientResultOutput) EncryptionCertificateSha1() pulumi.StringOutput

func (LookupClientResultOutput) ExtraConfig 

func (o LookupClientResultOutput) ExtraConfig() pulumi.StringMapOutput

func (LookupClientResultOutput) ForceNameIdFormat 

func (o LookupClientResultOutput) ForceNameIdFormat() pulumi.BoolOutput

func (LookupClientResultOutput) ForcePostBinding 

func (o LookupClientResultOutput) ForcePostBinding() pulumi.BoolOutput

func (LookupClientResultOutput) FrontChannelLogout 

func (o LookupClientResultOutput) FrontChannelLogout() pulumi.BoolOutput

func (LookupClientResultOutput) FullScopeAllowed 

func (o LookupClientResultOutput) FullScopeAllowed() pulumi.BoolOutput

func (LookupClientResultOutput) Id 

func (o LookupClientResultOutput) Id() pulumi.StringOutput

The provider-assigned unique ID for this managed resource.

func (LookupClientResultOutput) IdpInitiatedSsoRelayState 

func (o LookupClientResultOutput) IdpInitiatedSsoRelayState() pulumi.StringOutput

func (LookupClientResultOutput) IdpInitiatedSsoUrlName 

func (o LookupClientResultOutput) IdpInitiatedSsoUrlName() pulumi.StringOutput

func (LookupClientResultOutput) IncludeAuthnStatement 

func (o LookupClientResultOutput) IncludeAuthnStatement() pulumi.BoolOutput

func (LookupClientResultOutput) LoginTheme 

func (o LookupClientResultOutput) LoginTheme() pulumi.StringOutput

func (LookupClientResultOutput) LogoutServicePostBindingUrl 

func (o LookupClientResultOutput) LogoutServicePostBindingUrl() pulumi.StringOutput

func (LookupClientResultOutput) LogoutServiceRedirectBindingUrl 

func (o LookupClientResultOutput) LogoutServiceRedirectBindingUrl() pulumi.StringOutput

func (LookupClientResultOutput) MasterSamlProcessingUrl 

func (o LookupClientResultOutput) MasterSamlProcessingUrl() pulumi.StringOutput

func (LookupClientResultOutput) Name 

func (o LookupClientResultOutput) Name() pulumi.StringOutput

func (LookupClientResultOutput) NameIdFormat 

func (o LookupClientResultOutput) NameIdFormat() pulumi.StringOutput

func (LookupClientResultOutput) RealmId 

func (o LookupClientResultOutput) RealmId() pulumi.StringOutput

func (LookupClientResultOutput) RootUrl 

func (o LookupClientResultOutput) RootUrl() pulumi.StringOutput

func (LookupClientResultOutput) SamlSignatureKeyName 

func (o LookupClientResultOutput) SamlSignatureKeyName() pulumi.StringOutput

func (LookupClientResultOutput) SignAssertions 

func (o LookupClientResultOutput) SignAssertions() pulumi.BoolOutput

func (LookupClientResultOutput) SignDocuments 

func (o LookupClientResultOutput) SignDocuments() pulumi.BoolOutput

func (LookupClientResultOutput) SignatureAlgorithm 

func (o LookupClientResultOutput) SignatureAlgorithm() pulumi.StringOutput

func (LookupClientResultOutput) SignatureKeyName 

func (o LookupClientResultOutput) SignatureKeyName() pulumi.StringOutput

func (LookupClientResultOutput) SigningCertificate 

func (o LookupClientResultOutput) SigningCertificate() pulumi.StringOutput

func (LookupClientResultOutput) SigningCertificateSha1 

func (o LookupClientResultOutput) SigningCertificateSha1() pulumi.StringOutput

func (LookupClientResultOutput) SigningPrivateKey 

func (o LookupClientResultOutput) SigningPrivateKey() pulumi.StringOutput

func (LookupClientResultOutput) SigningPrivateKeySha1 

func (o LookupClientResultOutput) SigningPrivateKeySha1() pulumi.StringOutput

func (LookupClientResultOutput) ToLookupClientResultOutput 

func (o LookupClientResultOutput) ToLookupClientResultOutput() LookupClientResultOutput

func (LookupClientResultOutput) ToLookupClientResultOutputWithContext 

func (o LookupClientResultOutput) ToLookupClientResultOutputWithContext(ctx context.Context) LookupClientResultOutput

func (LookupClientResultOutput) ValidRedirectUris 

func (o LookupClientResultOutput) ValidRedirectUris() pulumi.StringArrayOutput

type ScriptProtocolMapper 

type ScriptProtocolMapper struct {
	pulumi.CustomResourceState

	// The client this protocol mapper should be attached to. Conflicts with `clientScopeId`. One of `clientId` or `clientScopeId` must be specified.
	ClientId pulumi.StringPtrOutput `pulumi:"clientId"`
	// The client scope this protocol mapper should be attached to. Conflicts with `clientId`. One of `clientId` or `clientScopeId` must be specified.
	ClientScopeId pulumi.StringPtrOutput `pulumi:"clientScopeId"`
	// An optional human-friendly name for this attribute.
	FriendlyName pulumi.StringPtrOutput `pulumi:"friendlyName"`
	// The display name of this protocol mapper in the GUI.
	Name pulumi.StringOutput `pulumi:"name"`
	// The realm this protocol mapper exists within.
	RealmId pulumi.StringOutput `pulumi:"realmId"`
	// The name of the SAML attribute.
	SamlAttributeName pulumi.StringOutput `pulumi:"samlAttributeName"`
	// The SAML attribute Name Format. Can be one of `Unspecified`, `Basic`, or `URI Reference`.
	SamlAttributeNameFormat pulumi.StringOutput `pulumi:"samlAttributeNameFormat"`
	// JavaScript code to compute the attribute value.
	Script pulumi.StringOutput `pulumi:"script"`
	// When `true`, all values will be stored under one attribute with multiple attribute values. Defaults to `true`.
	SingleValueAttribute pulumi.BoolPtrOutput `pulumi:"singleValueAttribute"`
}

Allows for creating and managing script protocol mappers for SAML clients within Keycloak.

Script protocol mappers evaluate a JavaScript function to produce an attribute value based on context information.

Protocol mappers can be defined for a single client, or they can be defined for a client scope which can be shared between multiple different clients.

## Example Usage

```go package main

import ( 

"github.com/pulumi/pulumi-keycloak/sdk/v5/go/keycloak"
"github.com/pulumi/pulumi-keycloak/sdk/v5/go/keycloak/saml"
"github.com/pulumi/pulumi/sdk/v3/go/pulumi"

) 

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		realm, err := keycloak.NewRealm(ctx, "realm", &keycloak.RealmArgs{
			Realm:   pulumi.String("my-realm"),
			Enabled: pulumi.Bool(true),
		})
		if err != nil {
			return err
		}
		samlClient, err := saml.NewClient(ctx, "saml_client", &saml.ClientArgs{
			RealmId:  realm.ID(),
			ClientId: pulumi.String("saml-client"),
			Name:     pulumi.String("saml-client"),
		})
		if err != nil {
			return err
		}
		_, err = saml.NewScriptProtocolMapper(ctx, "saml_script_mapper", &saml.ScriptProtocolMapperArgs{
			RealmId:                 realm.ID(),
			ClientId:                samlClient.ID(),
			Name:                    pulumi.String("script-mapper"),
			Script:                  pulumi.String("exports = 'foo';"),
			SamlAttributeName:       pulumi.String("displayName"),
			SamlAttributeNameFormat: pulumi.String("Unspecified"),
		})
		if err != nil {
			return err
		}
		return nil
	})
}

```

## Import

Protocol mappers can be imported using one of the following formats:

- Client: `{{realm_id}}/client/{{client_keycloak_id}}/{{protocol_mapper_id}}`

- Client Scope: `{{realm_id}}/client-scope/{{client_scope_keycloak_id}}/{{protocol_mapper_id}}`

Example:

bash

```sh $ pulumi import keycloak:saml/scriptProtocolMapper:ScriptProtocolMapper saml_script_mapper my-realm/client/a7202154-8793-4656-b655-1dd18c181e14/71602afa-f7d1-4788-8c49-ef8fd00af0f4 ```

```sh $ pulumi import keycloak:saml/scriptProtocolMapper:ScriptProtocolMapper saml_script_mapper my-realm/client-scope/b799ea7e-73ee-4a73-990a-1eafebe8e20a/71602afa-f7d1-4788-8c49-ef8fd00af0f4 ```

func GetScriptProtocolMapper 

func GetScriptProtocolMapper(ctx *pulumi.Context,
	name string, id pulumi.IDInput, state *ScriptProtocolMapperState, opts ...pulumi.ResourceOption) (*ScriptProtocolMapper, error)

GetScriptProtocolMapper gets an existing ScriptProtocolMapper resource's state with the given name, ID, and optional state properties that are used to uniquely qualify the lookup (nil if not required).

func NewScriptProtocolMapper 

func NewScriptProtocolMapper(ctx *pulumi.Context,
	name string, args *ScriptProtocolMapperArgs, opts ...pulumi.ResourceOption) (*ScriptProtocolMapper, error)

NewScriptProtocolMapper registers a new resource with the given unique name, arguments, and options.

func (*ScriptProtocolMapper) ElementType 

func (*ScriptProtocolMapper) ElementType() reflect.Type

func (*ScriptProtocolMapper) ToScriptProtocolMapperOutput 

func (i *ScriptProtocolMapper) ToScriptProtocolMapperOutput() ScriptProtocolMapperOutput

func (*ScriptProtocolMapper) ToScriptProtocolMapperOutputWithContext 

func (i *ScriptProtocolMapper) ToScriptProtocolMapperOutputWithContext(ctx context.Context) ScriptProtocolMapperOutput

type ScriptProtocolMapperArgs 

type ScriptProtocolMapperArgs struct {
	// The client this protocol mapper should be attached to. Conflicts with `clientScopeId`. One of `clientId` or `clientScopeId` must be specified.
	ClientId pulumi.StringPtrInput
	// The client scope this protocol mapper should be attached to. Conflicts with `clientId`. One of `clientId` or `clientScopeId` must be specified.
	ClientScopeId pulumi.StringPtrInput
	// An optional human-friendly name for this attribute.
	FriendlyName pulumi.StringPtrInput
	// The display name of this protocol mapper in the GUI.
	Name pulumi.StringPtrInput
	// The realm this protocol mapper exists within.
	RealmId pulumi.StringInput
	// The name of the SAML attribute.
	SamlAttributeName pulumi.StringInput
	// The SAML attribute Name Format. Can be one of `Unspecified`, `Basic`, or `URI Reference`.
	SamlAttributeNameFormat pulumi.StringInput
	// JavaScript code to compute the attribute value.
	Script pulumi.StringInput
	// When `true`, all values will be stored under one attribute with multiple attribute values. Defaults to `true`.
	SingleValueAttribute pulumi.BoolPtrInput
}

The set of arguments for constructing a ScriptProtocolMapper resource.

func (ScriptProtocolMapperArgs) ElementType 

func (ScriptProtocolMapperArgs) ElementType() reflect.Type

type ScriptProtocolMapperArray 

type ScriptProtocolMapperArray []ScriptProtocolMapperInput

func (ScriptProtocolMapperArray) ElementType 

func (ScriptProtocolMapperArray) ElementType() reflect.Type

func (ScriptProtocolMapperArray) ToScriptProtocolMapperArrayOutput 

func (i ScriptProtocolMapperArray) ToScriptProtocolMapperArrayOutput() ScriptProtocolMapperArrayOutput

func (ScriptProtocolMapperArray) ToScriptProtocolMapperArrayOutputWithContext 

func (i ScriptProtocolMapperArray) ToScriptProtocolMapperArrayOutputWithContext(ctx context.Context) ScriptProtocolMapperArrayOutput

type ScriptProtocolMapperArrayInput 

type ScriptProtocolMapperArrayInput interface {
	pulumi.Input

	ToScriptProtocolMapperArrayOutput() ScriptProtocolMapperArrayOutput
	ToScriptProtocolMapperArrayOutputWithContext(context.Context) ScriptProtocolMapperArrayOutput
}

ScriptProtocolMapperArrayInput is an input type that accepts ScriptProtocolMapperArray and ScriptProtocolMapperArrayOutput values. You can construct a concrete instance of `ScriptProtocolMapperArrayInput` via: 

ScriptProtocolMapperArray{ ScriptProtocolMapperArgs{...} }

type ScriptProtocolMapperArrayOutput 

type ScriptProtocolMapperArrayOutput struct{ *pulumi.OutputState }

func (ScriptProtocolMapperArrayOutput) ElementType 

func (ScriptProtocolMapperArrayOutput) ElementType() reflect.Type

func (ScriptProtocolMapperArrayOutput) Index 

func (o ScriptProtocolMapperArrayOutput) Index(i pulumi.IntInput) ScriptProtocolMapperOutput

func (ScriptProtocolMapperArrayOutput) ToScriptProtocolMapperArrayOutput 

func (o ScriptProtocolMapperArrayOutput) ToScriptProtocolMapperArrayOutput() ScriptProtocolMapperArrayOutput

func (ScriptProtocolMapperArrayOutput) ToScriptProtocolMapperArrayOutputWithContext 

func (o ScriptProtocolMapperArrayOutput) ToScriptProtocolMapperArrayOutputWithContext(ctx context.Context) ScriptProtocolMapperArrayOutput

type ScriptProtocolMapperInput 

type ScriptProtocolMapperInput interface {
	pulumi.Input

	ToScriptProtocolMapperOutput() ScriptProtocolMapperOutput
	ToScriptProtocolMapperOutputWithContext(ctx context.Context) ScriptProtocolMapperOutput
}

type ScriptProtocolMapperMap 

type ScriptProtocolMapperMap map[string]ScriptProtocolMapperInput

func (ScriptProtocolMapperMap) ElementType 

func (ScriptProtocolMapperMap) ElementType() reflect.Type

func (ScriptProtocolMapperMap) ToScriptProtocolMapperMapOutput 

func (i ScriptProtocolMapperMap) ToScriptProtocolMapperMapOutput() ScriptProtocolMapperMapOutput

func (ScriptProtocolMapperMap) ToScriptProtocolMapperMapOutputWithContext 

func (i ScriptProtocolMapperMap) ToScriptProtocolMapperMapOutputWithContext(ctx context.Context) ScriptProtocolMapperMapOutput

type ScriptProtocolMapperMapInput 

type ScriptProtocolMapperMapInput interface {
	pulumi.Input

	ToScriptProtocolMapperMapOutput() ScriptProtocolMapperMapOutput
	ToScriptProtocolMapperMapOutputWithContext(context.Context) ScriptProtocolMapperMapOutput
}

ScriptProtocolMapperMapInput is an input type that accepts ScriptProtocolMapperMap and ScriptProtocolMapperMapOutput values. You can construct a concrete instance of `ScriptProtocolMapperMapInput` via: 

ScriptProtocolMapperMap{ "key": ScriptProtocolMapperArgs{...} }

type ScriptProtocolMapperMapOutput 

type ScriptProtocolMapperMapOutput struct{ *pulumi.OutputState }

func (ScriptProtocolMapperMapOutput) ElementType 

func (ScriptProtocolMapperMapOutput) ElementType() reflect.Type

func (ScriptProtocolMapperMapOutput) MapIndex 

func (o ScriptProtocolMapperMapOutput) MapIndex(k pulumi.StringInput) ScriptProtocolMapperOutput

func (ScriptProtocolMapperMapOutput) ToScriptProtocolMapperMapOutput 

func (o ScriptProtocolMapperMapOutput) ToScriptProtocolMapperMapOutput() ScriptProtocolMapperMapOutput

func (ScriptProtocolMapperMapOutput) ToScriptProtocolMapperMapOutputWithContext 

func (o ScriptProtocolMapperMapOutput) ToScriptProtocolMapperMapOutputWithContext(ctx context.Context) ScriptProtocolMapperMapOutput

type ScriptProtocolMapperOutput 

type ScriptProtocolMapperOutput struct{ *pulumi.OutputState }

func (ScriptProtocolMapperOutput) ClientId 

func (o ScriptProtocolMapperOutput) ClientId() pulumi.StringPtrOutput

The client this protocol mapper should be attached to. Conflicts with `clientScopeId`. One of `clientId` or `clientScopeId` must be specified.

func (ScriptProtocolMapperOutput) ClientScopeId 

func (o ScriptProtocolMapperOutput) ClientScopeId() pulumi.StringPtrOutput

The client scope this protocol mapper should be attached to. Conflicts with `clientId`. One of `clientId` or `clientScopeId` must be specified.

func (ScriptProtocolMapperOutput) ElementType 

func (ScriptProtocolMapperOutput) ElementType() reflect.Type

func (ScriptProtocolMapperOutput) FriendlyName 

func (o ScriptProtocolMapperOutput) FriendlyName() pulumi.StringPtrOutput

An optional human-friendly name for this attribute.

func (ScriptProtocolMapperOutput) Name 

func (o ScriptProtocolMapperOutput) Name() pulumi.StringOutput

The display name of this protocol mapper in the GUI.

func (ScriptProtocolMapperOutput) RealmId 

func (o ScriptProtocolMapperOutput) RealmId() pulumi.StringOutput

The realm this protocol mapper exists within.

func (ScriptProtocolMapperOutput) SamlAttributeName 

func (o ScriptProtocolMapperOutput) SamlAttributeName() pulumi.StringOutput

The name of the SAML attribute.

func (ScriptProtocolMapperOutput) SamlAttributeNameFormat 

func (o ScriptProtocolMapperOutput) SamlAttributeNameFormat() pulumi.StringOutput

The SAML attribute Name Format. Can be one of `Unspecified`, `Basic`, or `URI Reference`.

func (ScriptProtocolMapperOutput) Script 

func (o ScriptProtocolMapperOutput) Script() pulumi.StringOutput

JavaScript code to compute the attribute value.

func (ScriptProtocolMapperOutput) SingleValueAttribute 

func (o ScriptProtocolMapperOutput) SingleValueAttribute() pulumi.BoolPtrOutput

When `true`, all values will be stored under one attribute with multiple attribute values. Defaults to `true`.

func (ScriptProtocolMapperOutput) ToScriptProtocolMapperOutput 

func (o ScriptProtocolMapperOutput) ToScriptProtocolMapperOutput() ScriptProtocolMapperOutput

func (ScriptProtocolMapperOutput) ToScriptProtocolMapperOutputWithContext 

func (o ScriptProtocolMapperOutput) ToScriptProtocolMapperOutputWithContext(ctx context.Context) ScriptProtocolMapperOutput

type ScriptProtocolMapperState 

type ScriptProtocolMapperState struct {
	// The client this protocol mapper should be attached to. Conflicts with `clientScopeId`. One of `clientId` or `clientScopeId` must be specified.
	ClientId pulumi.StringPtrInput
	// The client scope this protocol mapper should be attached to. Conflicts with `clientId`. One of `clientId` or `clientScopeId` must be specified.
	ClientScopeId pulumi.StringPtrInput
	// An optional human-friendly name for this attribute.
	FriendlyName pulumi.StringPtrInput
	// The display name of this protocol mapper in the GUI.
	Name pulumi.StringPtrInput
	// The realm this protocol mapper exists within.
	RealmId pulumi.StringPtrInput
	// The name of the SAML attribute.
	SamlAttributeName pulumi.StringPtrInput
	// The SAML attribute Name Format. Can be one of `Unspecified`, `Basic`, or `URI Reference`.
	SamlAttributeNameFormat pulumi.StringPtrInput
	// JavaScript code to compute the attribute value.
	Script pulumi.StringPtrInput
	// When `true`, all values will be stored under one attribute with multiple attribute values. Defaults to `true`.
	SingleValueAttribute pulumi.BoolPtrInput
}

func (ScriptProtocolMapperState) ElementType 

func (ScriptProtocolMapperState) ElementType() reflect.Type

type UserAttributeProtocolMapper 

type UserAttributeProtocolMapper struct {
	pulumi.CustomResourceState

	// The client this protocol mapper should be attached to. Conflicts with `clientScopeId`. One of `clientId` or `clientScopeId` must be specified.
	ClientId pulumi.StringPtrOutput `pulumi:"clientId"`
	// The client scope this protocol mapper should be attached to. Conflicts with `clientId`. One of `clientId` or `clientScopeId` must be specified.
	ClientScopeId pulumi.StringPtrOutput `pulumi:"clientScopeId"`
	// An optional human-friendly name for this attribute.
	FriendlyName pulumi.StringPtrOutput `pulumi:"friendlyName"`
	// The display name of this protocol mapper in the GUI.
	Name pulumi.StringOutput `pulumi:"name"`
	// The realm this protocol mapper exists within.
	RealmId pulumi.StringOutput `pulumi:"realmId"`
	// The name of the SAML attribute.
	SamlAttributeName pulumi.StringOutput `pulumi:"samlAttributeName"`
	// The SAML attribute Name Format. Can be one of `Unspecified`, `Basic`, or `URI Reference`.
	SamlAttributeNameFormat pulumi.StringOutput `pulumi:"samlAttributeNameFormat"`
	// The custom user attribute to map.
	UserAttribute pulumi.StringOutput `pulumi:"userAttribute"`
}

Allows for creating and managing user attribute protocol mappers for SAML clients within Keycloak.

SAML user attribute protocol mappers allow you to map custom attributes defined for a user within Keycloak to an attribute in a SAML assertion.

Protocol mappers can be defined for a single client, or they can be defined for a client scope which can be shared between multiple different clients.

## Example Usage

```go package main

import ( 

"github.com/pulumi/pulumi-keycloak/sdk/v5/go/keycloak"
"github.com/pulumi/pulumi-keycloak/sdk/v5/go/keycloak/saml"
"github.com/pulumi/pulumi/sdk/v3/go/pulumi"

) 

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		realm, err := keycloak.NewRealm(ctx, "realm", &keycloak.RealmArgs{
			Realm:   pulumi.String("my-realm"),
			Enabled: pulumi.Bool(true),
		})
		if err != nil {
			return err
		}
		samlClient, err := saml.NewClient(ctx, "saml_client", &saml.ClientArgs{
			RealmId:  realm.ID(),
			ClientId: pulumi.String("saml-client"),
			Name:     pulumi.String("saml-client"),
		})
		if err != nil {
			return err
		}
		_, err = saml.NewUserAttributeProtocolMapper(ctx, "saml_user_attribute_mapper", &saml.UserAttributeProtocolMapperArgs{
			RealmId:                 realm.ID(),
			ClientId:                samlClient.ID(),
			Name:                    pulumi.String("displayname-user-attribute-mapper"),
			UserAttribute:           pulumi.String("displayName"),
			SamlAttributeName:       pulumi.String("displayName"),
			SamlAttributeNameFormat: pulumi.String("Unspecified"),
		})
		if err != nil {
			return err
		}
		return nil
	})
}

```

## Import

Protocol mappers can be imported using one of the following formats:

- Client: `{{realm_id}}/client/{{client_keycloak_id}}/{{protocol_mapper_id}}`

- Client Scope: `{{realm_id}}/client-scope/{{client_scope_keycloak_id}}/{{protocol_mapper_id}}`

Example:

bash

```sh $ pulumi import keycloak:saml/userAttributeProtocolMapper:UserAttributeProtocolMapper saml_user_attribute_mapper my-realm/client/a7202154-8793-4656-b655-1dd18c181e14/71602afa-f7d1-4788-8c49-ef8fd00af0f4 ```

```sh $ pulumi import keycloak:saml/userAttributeProtocolMapper:UserAttributeProtocolMapper saml_user_attribute_mapper my-realm/client-scope/b799ea7e-73ee-4a73-990a-1eafebe8e20a/71602afa-f7d1-4788-8c49-ef8fd00af0f4 ```

func GetUserAttributeProtocolMapper 

func GetUserAttributeProtocolMapper(ctx *pulumi.Context,
	name string, id pulumi.IDInput, state *UserAttributeProtocolMapperState, opts ...pulumi.ResourceOption) (*UserAttributeProtocolMapper, error)

GetUserAttributeProtocolMapper gets an existing UserAttributeProtocolMapper resource's state with the given name, ID, and optional state properties that are used to uniquely qualify the lookup (nil if not required).

func NewUserAttributeProtocolMapper 

func NewUserAttributeProtocolMapper(ctx *pulumi.Context,
	name string, args *UserAttributeProtocolMapperArgs, opts ...pulumi.ResourceOption) (*UserAttributeProtocolMapper, error)

NewUserAttributeProtocolMapper registers a new resource with the given unique name, arguments, and options.

func (*UserAttributeProtocolMapper) ElementType 

func (*UserAttributeProtocolMapper) ElementType() reflect.Type

func (*UserAttributeProtocolMapper) ToUserAttributeProtocolMapperOutput 

func (i *UserAttributeProtocolMapper) ToUserAttributeProtocolMapperOutput() UserAttributeProtocolMapperOutput

func (*UserAttributeProtocolMapper) ToUserAttributeProtocolMapperOutputWithContext 

func (i *UserAttributeProtocolMapper) ToUserAttributeProtocolMapperOutputWithContext(ctx context.Context) UserAttributeProtocolMapperOutput

type UserAttributeProtocolMapperArgs 

type UserAttributeProtocolMapperArgs struct {
	// The client this protocol mapper should be attached to. Conflicts with `clientScopeId`. One of `clientId` or `clientScopeId` must be specified.
	ClientId pulumi.StringPtrInput
	// The client scope this protocol mapper should be attached to. Conflicts with `clientId`. One of `clientId` or `clientScopeId` must be specified.
	ClientScopeId pulumi.StringPtrInput
	// An optional human-friendly name for this attribute.
	FriendlyName pulumi.StringPtrInput
	// The display name of this protocol mapper in the GUI.
	Name pulumi.StringPtrInput
	// The realm this protocol mapper exists within.
	RealmId pulumi.StringInput
	// The name of the SAML attribute.
	SamlAttributeName pulumi.StringInput
	// The SAML attribute Name Format. Can be one of `Unspecified`, `Basic`, or `URI Reference`.
	SamlAttributeNameFormat pulumi.StringInput
	// The custom user attribute to map.
	UserAttribute pulumi.StringInput
}

The set of arguments for constructing a UserAttributeProtocolMapper resource.

func (UserAttributeProtocolMapperArgs) ElementType 

func (UserAttributeProtocolMapperArgs) ElementType() reflect.Type

type UserAttributeProtocolMapperArray 

type UserAttributeProtocolMapperArray []UserAttributeProtocolMapperInput

func (UserAttributeProtocolMapperArray) ElementType 

func (UserAttributeProtocolMapperArray) ElementType() reflect.Type

func (UserAttributeProtocolMapperArray) ToUserAttributeProtocolMapperArrayOutput 

func (i UserAttributeProtocolMapperArray) ToUserAttributeProtocolMapperArrayOutput() UserAttributeProtocolMapperArrayOutput

func (UserAttributeProtocolMapperArray) ToUserAttributeProtocolMapperArrayOutputWithContext 

func (i UserAttributeProtocolMapperArray) ToUserAttributeProtocolMapperArrayOutputWithContext(ctx context.Context) UserAttributeProtocolMapperArrayOutput

type UserAttributeProtocolMapperArrayInput 

type UserAttributeProtocolMapperArrayInput interface {
	pulumi.Input

	ToUserAttributeProtocolMapperArrayOutput() UserAttributeProtocolMapperArrayOutput
	ToUserAttributeProtocolMapperArrayOutputWithContext(context.Context) UserAttributeProtocolMapperArrayOutput
}

UserAttributeProtocolMapperArrayInput is an input type that accepts UserAttributeProtocolMapperArray and UserAttributeProtocolMapperArrayOutput values. You can construct a concrete instance of `UserAttributeProtocolMapperArrayInput` via: 

UserAttributeProtocolMapperArray{ UserAttributeProtocolMapperArgs{...} }

type UserAttributeProtocolMapperArrayOutput 

type UserAttributeProtocolMapperArrayOutput struct{ *pulumi.OutputState }

func (UserAttributeProtocolMapperArrayOutput) ElementType 

func (UserAttributeProtocolMapperArrayOutput) ElementType() reflect.Type

func (UserAttributeProtocolMapperArrayOutput) Index 

func (o UserAttributeProtocolMapperArrayOutput) Index(i pulumi.IntInput) UserAttributeProtocolMapperOutput

func (UserAttributeProtocolMapperArrayOutput) ToUserAttributeProtocolMapperArrayOutput 

func (o UserAttributeProtocolMapperArrayOutput) ToUserAttributeProtocolMapperArrayOutput() UserAttributeProtocolMapperArrayOutput

func (UserAttributeProtocolMapperArrayOutput) ToUserAttributeProtocolMapperArrayOutputWithContext 

func (o UserAttributeProtocolMapperArrayOutput) ToUserAttributeProtocolMapperArrayOutputWithContext(ctx context.Context) UserAttributeProtocolMapperArrayOutput

type UserAttributeProtocolMapperInput 

type UserAttributeProtocolMapperInput interface {
	pulumi.Input

	ToUserAttributeProtocolMapperOutput() UserAttributeProtocolMapperOutput
	ToUserAttributeProtocolMapperOutputWithContext(ctx context.Context) UserAttributeProtocolMapperOutput
}

type UserAttributeProtocolMapperMap 

type UserAttributeProtocolMapperMap map[string]UserAttributeProtocolMapperInput

func (UserAttributeProtocolMapperMap) ElementType 

func (UserAttributeProtocolMapperMap) ElementType() reflect.Type

func (UserAttributeProtocolMapperMap) ToUserAttributeProtocolMapperMapOutput 

func (i UserAttributeProtocolMapperMap) ToUserAttributeProtocolMapperMapOutput() UserAttributeProtocolMapperMapOutput

func (UserAttributeProtocolMapperMap) ToUserAttributeProtocolMapperMapOutputWithContext 

func (i UserAttributeProtocolMapperMap) ToUserAttributeProtocolMapperMapOutputWithContext(ctx context.Context) UserAttributeProtocolMapperMapOutput

type UserAttributeProtocolMapperMapInput 

type UserAttributeProtocolMapperMapInput interface {
	pulumi.Input

	ToUserAttributeProtocolMapperMapOutput() UserAttributeProtocolMapperMapOutput
	ToUserAttributeProtocolMapperMapOutputWithContext(context.Context) UserAttributeProtocolMapperMapOutput
}

UserAttributeProtocolMapperMapInput is an input type that accepts UserAttributeProtocolMapperMap and UserAttributeProtocolMapperMapOutput values. You can construct a concrete instance of `UserAttributeProtocolMapperMapInput` via: 

UserAttributeProtocolMapperMap{ "key": UserAttributeProtocolMapperArgs{...} }

type UserAttributeProtocolMapperMapOutput 

type UserAttributeProtocolMapperMapOutput struct{ *pulumi.OutputState }

func (UserAttributeProtocolMapperMapOutput) ElementType 

func (UserAttributeProtocolMapperMapOutput) ElementType() reflect.Type

func (UserAttributeProtocolMapperMapOutput) MapIndex 

func (o UserAttributeProtocolMapperMapOutput) MapIndex(k pulumi.StringInput) UserAttributeProtocolMapperOutput

func (UserAttributeProtocolMapperMapOutput) ToUserAttributeProtocolMapperMapOutput 

func (o UserAttributeProtocolMapperMapOutput) ToUserAttributeProtocolMapperMapOutput() UserAttributeProtocolMapperMapOutput

func (UserAttributeProtocolMapperMapOutput) ToUserAttributeProtocolMapperMapOutputWithContext 

func (o UserAttributeProtocolMapperMapOutput) ToUserAttributeProtocolMapperMapOutputWithContext(ctx context.Context) UserAttributeProtocolMapperMapOutput

type UserAttributeProtocolMapperOutput 

type UserAttributeProtocolMapperOutput struct{ *pulumi.OutputState }

func (UserAttributeProtocolMapperOutput) ClientId 

func (o UserAttributeProtocolMapperOutput) ClientId() pulumi.StringPtrOutput

The client this protocol mapper should be attached to. Conflicts with `clientScopeId`. One of `clientId` or `clientScopeId` must be specified.

func (UserAttributeProtocolMapperOutput) ClientScopeId 

func (o UserAttributeProtocolMapperOutput) ClientScopeId() pulumi.StringPtrOutput

The client scope this protocol mapper should be attached to. Conflicts with `clientId`. One of `clientId` or `clientScopeId` must be specified.

func (UserAttributeProtocolMapperOutput) ElementType 

func (UserAttributeProtocolMapperOutput) ElementType() reflect.Type

func (UserAttributeProtocolMapperOutput) FriendlyName 

func (o UserAttributeProtocolMapperOutput) FriendlyName() pulumi.StringPtrOutput

An optional human-friendly name for this attribute.

func (UserAttributeProtocolMapperOutput) Name 

func (o UserAttributeProtocolMapperOutput) Name() pulumi.StringOutput

The display name of this protocol mapper in the GUI.

func (UserAttributeProtocolMapperOutput) RealmId 

func (o UserAttributeProtocolMapperOutput) RealmId() pulumi.StringOutput

The realm this protocol mapper exists within.

func (UserAttributeProtocolMapperOutput) SamlAttributeName 

func (o UserAttributeProtocolMapperOutput) SamlAttributeName() pulumi.StringOutput

The name of the SAML attribute.

func (UserAttributeProtocolMapperOutput) SamlAttributeNameFormat 

func (o UserAttributeProtocolMapperOutput) SamlAttributeNameFormat() pulumi.StringOutput

The SAML attribute Name Format. Can be one of `Unspecified`, `Basic`, or `URI Reference`.

func (UserAttributeProtocolMapperOutput) ToUserAttributeProtocolMapperOutput 

func (o UserAttributeProtocolMapperOutput) ToUserAttributeProtocolMapperOutput() UserAttributeProtocolMapperOutput

func (UserAttributeProtocolMapperOutput) ToUserAttributeProtocolMapperOutputWithContext 

func (o UserAttributeProtocolMapperOutput) ToUserAttributeProtocolMapperOutputWithContext(ctx context.Context) UserAttributeProtocolMapperOutput

func (UserAttributeProtocolMapperOutput) UserAttribute 

func (o UserAttributeProtocolMapperOutput) UserAttribute() pulumi.StringOutput

The custom user attribute to map.

type UserAttributeProtocolMapperState 

type UserAttributeProtocolMapperState struct {
	// The client this protocol mapper should be attached to. Conflicts with `clientScopeId`. One of `clientId` or `clientScopeId` must be specified.
	ClientId pulumi.StringPtrInput
	// The client scope this protocol mapper should be attached to. Conflicts with `clientId`. One of `clientId` or `clientScopeId` must be specified.
	ClientScopeId pulumi.StringPtrInput
	// An optional human-friendly name for this attribute.
	FriendlyName pulumi.StringPtrInput
	// The display name of this protocol mapper in the GUI.
	Name pulumi.StringPtrInput
	// The realm this protocol mapper exists within.
	RealmId pulumi.StringPtrInput
	// The name of the SAML attribute.
	SamlAttributeName pulumi.StringPtrInput
	// The SAML attribute Name Format. Can be one of `Unspecified`, `Basic`, or `URI Reference`.
	SamlAttributeNameFormat pulumi.StringPtrInput
	// The custom user attribute to map.
	UserAttribute pulumi.StringPtrInput
}

func (UserAttributeProtocolMapperState) ElementType 

func (UserAttributeProtocolMapperState) ElementType() reflect.Type

type UserPropertyProtocolMapper 

type UserPropertyProtocolMapper struct {
	pulumi.CustomResourceState

	// The client this protocol mapper should be attached to. Conflicts with `clientScopeId`. One of `clientId` or `clientScopeId` must be specified.
	ClientId pulumi.StringPtrOutput `pulumi:"clientId"`
	// The client scope this protocol mapper should be attached to. Conflicts with `clientId`. One of `clientId` or `clientScopeId` must be specified.
	ClientScopeId pulumi.StringPtrOutput `pulumi:"clientScopeId"`
	// An optional human-friendly name for this attribute.
	FriendlyName pulumi.StringPtrOutput `pulumi:"friendlyName"`
	// The display name of this protocol mapper in the GUI.
	Name pulumi.StringOutput `pulumi:"name"`
	// The realm this protocol mapper exists within.
	RealmId pulumi.StringOutput `pulumi:"realmId"`
	// The name of the SAML attribute.
	SamlAttributeName pulumi.StringOutput `pulumi:"samlAttributeName"`
	// The SAML attribute Name Format. Can be one of `Unspecified`, `Basic`, or `URI Reference`.
	SamlAttributeNameFormat pulumi.StringOutput `pulumi:"samlAttributeNameFormat"`
	// The property of the Keycloak user model to map.
	UserProperty pulumi.StringOutput `pulumi:"userProperty"`
}

Allows for creating and managing user property protocol mappers for SAML clients within Keycloak.

SAML user property protocol mappers allow you to map properties of the Keycloak user model to an attribute in a SAML assertion.

Protocol mappers can be defined for a single client, or they can be defined for a client scope which can be shared between multiple different clients.

## Example Usage

```go package main

import ( 

"github.com/pulumi/pulumi-keycloak/sdk/v5/go/keycloak"
"github.com/pulumi/pulumi-keycloak/sdk/v5/go/keycloak/saml"
"github.com/pulumi/pulumi/sdk/v3/go/pulumi"

) 

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		realm, err := keycloak.NewRealm(ctx, "realm", &keycloak.RealmArgs{
			Realm:   pulumi.String("my-realm"),
			Enabled: pulumi.Bool(true),
		})
		if err != nil {
			return err
		}
		samlClient, err := saml.NewClient(ctx, "saml_client", &saml.ClientArgs{
			RealmId:  realm.ID(),
			ClientId: pulumi.String("saml-client"),
			Name:     pulumi.String("saml-client"),
		})
		if err != nil {
			return err
		}
		_, err = saml.NewUserPropertyProtocolMapper(ctx, "saml_user_property_mapper", &saml.UserPropertyProtocolMapperArgs{
			RealmId:                 realm.ID(),
			ClientId:                samlClient.ID(),
			Name:                    pulumi.String("email-user-property-mapper"),
			UserProperty:            pulumi.String("email"),
			SamlAttributeName:       pulumi.String("email"),
			SamlAttributeNameFormat: pulumi.String("Unspecified"),
		})
		if err != nil {
			return err
		}
		return nil
	})
}

```

## Import

Protocol mappers can be imported using one of the following formats:

- Client: `{{realm_id}}/client/{{client_keycloak_id}}/{{protocol_mapper_id}}`

- Client Scope: `{{realm_id}}/client-scope/{{client_scope_keycloak_id}}/{{protocol_mapper_id}}`

Example:

bash

```sh $ pulumi import keycloak:saml/userPropertyProtocolMapper:UserPropertyProtocolMapper saml_user_property_mapper my-realm/client/a7202154-8793-4656-b655-1dd18c181e14/71602afa-f7d1-4788-8c49-ef8fd00af0f4 ```

```sh $ pulumi import keycloak:saml/userPropertyProtocolMapper:UserPropertyProtocolMapper saml_user_property_mapper my-realm/client-scope/b799ea7e-73ee-4a73-990a-1eafebe8e20a/71602afa-f7d1-4788-8c49-ef8fd00af0f4 ```

func GetUserPropertyProtocolMapper 

func GetUserPropertyProtocolMapper(ctx *pulumi.Context,
	name string, id pulumi.IDInput, state *UserPropertyProtocolMapperState, opts ...pulumi.ResourceOption) (*UserPropertyProtocolMapper, error)

GetUserPropertyProtocolMapper gets an existing UserPropertyProtocolMapper resource's state with the given name, ID, and optional state properties that are used to uniquely qualify the lookup (nil if not required).

func NewUserPropertyProtocolMapper 

func NewUserPropertyProtocolMapper(ctx *pulumi.Context,
	name string, args *UserPropertyProtocolMapperArgs, opts ...pulumi.ResourceOption) (*UserPropertyProtocolMapper, error)

NewUserPropertyProtocolMapper registers a new resource with the given unique name, arguments, and options.

func (*UserPropertyProtocolMapper) ElementType 

func (*UserPropertyProtocolMapper) ElementType() reflect.Type

func (*UserPropertyProtocolMapper) ToUserPropertyProtocolMapperOutput 

func (i *UserPropertyProtocolMapper) ToUserPropertyProtocolMapperOutput() UserPropertyProtocolMapperOutput

func (*UserPropertyProtocolMapper) ToUserPropertyProtocolMapperOutputWithContext 

func (i *UserPropertyProtocolMapper) ToUserPropertyProtocolMapperOutputWithContext(ctx context.Context) UserPropertyProtocolMapperOutput

type UserPropertyProtocolMapperArgs 

type UserPropertyProtocolMapperArgs struct {
	// The client this protocol mapper should be attached to. Conflicts with `clientScopeId`. One of `clientId` or `clientScopeId` must be specified.
	ClientId pulumi.StringPtrInput
	// The client scope this protocol mapper should be attached to. Conflicts with `clientId`. One of `clientId` or `clientScopeId` must be specified.
	ClientScopeId pulumi.StringPtrInput
	// An optional human-friendly name for this attribute.
	FriendlyName pulumi.StringPtrInput
	// The display name of this protocol mapper in the GUI.
	Name pulumi.StringPtrInput
	// The realm this protocol mapper exists within.
	RealmId pulumi.StringInput
	// The name of the SAML attribute.
	SamlAttributeName pulumi.StringInput
	// The SAML attribute Name Format. Can be one of `Unspecified`, `Basic`, or `URI Reference`.
	SamlAttributeNameFormat pulumi.StringInput
	// The property of the Keycloak user model to map.
	UserProperty pulumi.StringInput
}

The set of arguments for constructing a UserPropertyProtocolMapper resource.

func (UserPropertyProtocolMapperArgs) ElementType 

func (UserPropertyProtocolMapperArgs) ElementType() reflect.Type

type UserPropertyProtocolMapperArray 

type UserPropertyProtocolMapperArray []UserPropertyProtocolMapperInput

func (UserPropertyProtocolMapperArray) ElementType 

func (UserPropertyProtocolMapperArray) ElementType() reflect.Type

func (UserPropertyProtocolMapperArray) ToUserPropertyProtocolMapperArrayOutput 

func (i UserPropertyProtocolMapperArray) ToUserPropertyProtocolMapperArrayOutput() UserPropertyProtocolMapperArrayOutput

func (UserPropertyProtocolMapperArray) ToUserPropertyProtocolMapperArrayOutputWithContext 

func (i UserPropertyProtocolMapperArray) ToUserPropertyProtocolMapperArrayOutputWithContext(ctx context.Context) UserPropertyProtocolMapperArrayOutput

type UserPropertyProtocolMapperArrayInput 

type UserPropertyProtocolMapperArrayInput interface {
	pulumi.Input

	ToUserPropertyProtocolMapperArrayOutput() UserPropertyProtocolMapperArrayOutput
	ToUserPropertyProtocolMapperArrayOutputWithContext(context.Context) UserPropertyProtocolMapperArrayOutput
}

UserPropertyProtocolMapperArrayInput is an input type that accepts UserPropertyProtocolMapperArray and UserPropertyProtocolMapperArrayOutput values. You can construct a concrete instance of `UserPropertyProtocolMapperArrayInput` via: 

UserPropertyProtocolMapperArray{ UserPropertyProtocolMapperArgs{...} }

type UserPropertyProtocolMapperArrayOutput 

type UserPropertyProtocolMapperArrayOutput struct{ *pulumi.OutputState }

func (UserPropertyProtocolMapperArrayOutput) ElementType 

func (UserPropertyProtocolMapperArrayOutput) ElementType() reflect.Type

func (UserPropertyProtocolMapperArrayOutput) Index 

func (o UserPropertyProtocolMapperArrayOutput) Index(i pulumi.IntInput) UserPropertyProtocolMapperOutput

func (UserPropertyProtocolMapperArrayOutput) ToUserPropertyProtocolMapperArrayOutput 

func (o UserPropertyProtocolMapperArrayOutput) ToUserPropertyProtocolMapperArrayOutput() UserPropertyProtocolMapperArrayOutput

func (UserPropertyProtocolMapperArrayOutput) ToUserPropertyProtocolMapperArrayOutputWithContext 

func (o UserPropertyProtocolMapperArrayOutput) ToUserPropertyProtocolMapperArrayOutputWithContext(ctx context.Context) UserPropertyProtocolMapperArrayOutput

type UserPropertyProtocolMapperInput 

type UserPropertyProtocolMapperInput interface {
	pulumi.Input

	ToUserPropertyProtocolMapperOutput() UserPropertyProtocolMapperOutput
	ToUserPropertyProtocolMapperOutputWithContext(ctx context.Context) UserPropertyProtocolMapperOutput
}

type UserPropertyProtocolMapperMap 

type UserPropertyProtocolMapperMap map[string]UserPropertyProtocolMapperInput

func (UserPropertyProtocolMapperMap) ElementType 

func (UserPropertyProtocolMapperMap) ElementType() reflect.Type

func (UserPropertyProtocolMapperMap) ToUserPropertyProtocolMapperMapOutput 

func (i UserPropertyProtocolMapperMap) ToUserPropertyProtocolMapperMapOutput() UserPropertyProtocolMapperMapOutput

func (UserPropertyProtocolMapperMap) ToUserPropertyProtocolMapperMapOutputWithContext 

func (i UserPropertyProtocolMapperMap) ToUserPropertyProtocolMapperMapOutputWithContext(ctx context.Context) UserPropertyProtocolMapperMapOutput

type UserPropertyProtocolMapperMapInput 

type UserPropertyProtocolMapperMapInput interface {
	pulumi.Input

	ToUserPropertyProtocolMapperMapOutput() UserPropertyProtocolMapperMapOutput
	ToUserPropertyProtocolMapperMapOutputWithContext(context.Context) UserPropertyProtocolMapperMapOutput
}

UserPropertyProtocolMapperMapInput is an input type that accepts UserPropertyProtocolMapperMap and UserPropertyProtocolMapperMapOutput values. You can construct a concrete instance of `UserPropertyProtocolMapperMapInput` via: 

UserPropertyProtocolMapperMap{ "key": UserPropertyProtocolMapperArgs{...} }

type UserPropertyProtocolMapperMapOutput 

type UserPropertyProtocolMapperMapOutput struct{ *pulumi.OutputState }

func (UserPropertyProtocolMapperMapOutput) ElementType 

func (UserPropertyProtocolMapperMapOutput) ElementType() reflect.Type

func (UserPropertyProtocolMapperMapOutput) MapIndex 

func (o UserPropertyProtocolMapperMapOutput) MapIndex(k pulumi.StringInput) UserPropertyProtocolMapperOutput

func (UserPropertyProtocolMapperMapOutput) ToUserPropertyProtocolMapperMapOutput 

func (o UserPropertyProtocolMapperMapOutput) ToUserPropertyProtocolMapperMapOutput() UserPropertyProtocolMapperMapOutput

func (UserPropertyProtocolMapperMapOutput) ToUserPropertyProtocolMapperMapOutputWithContext 

func (o UserPropertyProtocolMapperMapOutput) ToUserPropertyProtocolMapperMapOutputWithContext(ctx context.Context) UserPropertyProtocolMapperMapOutput

type UserPropertyProtocolMapperOutput 

type UserPropertyProtocolMapperOutput struct{ *pulumi.OutputState }

func (UserPropertyProtocolMapperOutput) ClientId 

func (o UserPropertyProtocolMapperOutput) ClientId() pulumi.StringPtrOutput

The client this protocol mapper should be attached to. Conflicts with `clientScopeId`. One of `clientId` or `clientScopeId` must be specified.

func (UserPropertyProtocolMapperOutput) ClientScopeId 

func (o UserPropertyProtocolMapperOutput) ClientScopeId() pulumi.StringPtrOutput

The client scope this protocol mapper should be attached to. Conflicts with `clientId`. One of `clientId` or `clientScopeId` must be specified.

func (UserPropertyProtocolMapperOutput) ElementType 

func (UserPropertyProtocolMapperOutput) ElementType() reflect.Type

func (UserPropertyProtocolMapperOutput) FriendlyName 

func (o UserPropertyProtocolMapperOutput) FriendlyName() pulumi.StringPtrOutput

An optional human-friendly name for this attribute.

func (UserPropertyProtocolMapperOutput) Name 

func (o UserPropertyProtocolMapperOutput) Name() pulumi.StringOutput

The display name of this protocol mapper in the GUI.

func (UserPropertyProtocolMapperOutput) RealmId 

func (o UserPropertyProtocolMapperOutput) RealmId() pulumi.StringOutput

The realm this protocol mapper exists within.

func (UserPropertyProtocolMapperOutput) SamlAttributeName 

func (o UserPropertyProtocolMapperOutput) SamlAttributeName() pulumi.StringOutput

The name of the SAML attribute.

func (UserPropertyProtocolMapperOutput) SamlAttributeNameFormat 

func (o UserPropertyProtocolMapperOutput) SamlAttributeNameFormat() pulumi.StringOutput

The SAML attribute Name Format. Can be one of `Unspecified`, `Basic`, or `URI Reference`.

func (UserPropertyProtocolMapperOutput) ToUserPropertyProtocolMapperOutput 

func (o UserPropertyProtocolMapperOutput) ToUserPropertyProtocolMapperOutput() UserPropertyProtocolMapperOutput

func (UserPropertyProtocolMapperOutput) ToUserPropertyProtocolMapperOutputWithContext 

func (o UserPropertyProtocolMapperOutput) ToUserPropertyProtocolMapperOutputWithContext(ctx context.Context) UserPropertyProtocolMapperOutput

func (UserPropertyProtocolMapperOutput) UserProperty 

func (o UserPropertyProtocolMapperOutput) UserProperty() pulumi.StringOutput

The property of the Keycloak user model to map.

type UserPropertyProtocolMapperState 

type UserPropertyProtocolMapperState struct {
	// The client this protocol mapper should be attached to. Conflicts with `clientScopeId`. One of `clientId` or `clientScopeId` must be specified.
	ClientId pulumi.StringPtrInput
	// The client scope this protocol mapper should be attached to. Conflicts with `clientId`. One of `clientId` or `clientScopeId` must be specified.
	ClientScopeId pulumi.StringPtrInput
	// An optional human-friendly name for this attribute.
	FriendlyName pulumi.StringPtrInput
	// The display name of this protocol mapper in the GUI.
	Name pulumi.StringPtrInput
	// The realm this protocol mapper exists within.
	RealmId pulumi.StringPtrInput
	// The name of the SAML attribute.
	SamlAttributeName pulumi.StringPtrInput
	// The SAML attribute Name Format. Can be one of `Unspecified`, `Basic`, or `URI Reference`.
	SamlAttributeNameFormat pulumi.StringPtrInput
	// The property of the Keycloak user model to map.
	UserProperty pulumi.StringPtrInput
}

func (UserPropertyProtocolMapperState) ElementType 

func (UserPropertyProtocolMapperState) ElementType() reflect.Type

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.