v1

package
v0.0.1-alpha.100 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Jan 25, 2025 License: Apache-2.0 Imports: 7 Imported by: 0

Documentation

Index

Constants

View Source 
const (
	// The fade type is not specified.
	AnimationFadeFadeTypeFadeTypeUnspecified = AnimationFadeFadeType("FADE_TYPE_UNSPECIFIED")
	// Fade the overlay object into view.
	AnimationFadeFadeTypeFadeIn = AnimationFadeFadeType("FADE_IN")
	// Fade the overlay object out of view.
	AnimationFadeFadeTypeFadeOut = AnimationFadeFadeType("FADE_OUT")
)
View Source 
const (
	// The segment reference scheme is not specified.
	DashConfigSegmentReferenceSchemeSegmentReferenceSchemeUnspecified = DashConfigSegmentReferenceScheme("SEGMENT_REFERENCE_SCHEME_UNSPECIFIED")
	// Explicitly lists the URLs of media files for each segment. For example, if SegmentSettings.individual_segments is `true`, then the manifest contains fields similar to the following: “` xml ...  “`
	DashConfigSegmentReferenceSchemeSegmentList = DashConfigSegmentReferenceScheme("SEGMENT_LIST")
	// SegmentSettings.individual_segments must be set to `true` to use this segment reference scheme. Uses the DASH specification “ tag to determine the URLs of media files for each segment. For example: “` xml ...  “`
	DashConfigSegmentReferenceSchemeSegmentTemplateNumber = DashConfigSegmentReferenceScheme("SEGMENT_TEMPLATE_NUMBER")
)
View Source 
const (
	// The job processing mode is not specified.
	JobModeProcessingModeUnspecified = JobMode("PROCESSING_MODE_UNSPECIFIED")
	// The job processing mode is interactive mode. Interactive job will either be ran or rejected if quota does not allow for it.
	JobModeProcessingModeInteractive = JobMode("PROCESSING_MODE_INTERACTIVE")
	// The job processing mode is batch mode. Batch mode allows queuing of jobs.
	JobModeProcessingModeBatch = JobMode("PROCESSING_MODE_BATCH")
)
View Source 
const (
	// The optimization strategy is not specified.
	JobOptimizationOptimizationStrategyUnspecified = JobOptimization("OPTIMIZATION_STRATEGY_UNSPECIFIED")
	// Prioritize job processing speed.
	JobOptimizationAutodetect = JobOptimization("AUTODETECT")
	// Disable all optimizations.
	JobOptimizationDisabled = JobOptimization("DISABLED")
)
View Source 
const (
	// The manifest type is not specified.
	ManifestTypeManifestTypeUnspecified = ManifestType("MANIFEST_TYPE_UNSPECIFIED")
	// Create an HLS manifest. The corresponding file extension is `.m3u8`.
	ManifestTypeHls = ManifestType("HLS")
	// Create an MPEG-DASH manifest. The corresponding file extension is `.mpd`.
	ManifestTypeDash = ManifestType("DASH")
)

Variables

This section is empty.

Functions

This section is empty.

Types

type AdBreak 

type AdBreak struct {
	// Start time in seconds for the ad break, relative to the output file timeline. The default is `0s`.
	StartTimeOffset *string `pulumi:"startTimeOffset"`
}

Ad break.

type AdBreakArgs 

type AdBreakArgs struct {
	// Start time in seconds for the ad break, relative to the output file timeline. The default is `0s`.
	StartTimeOffset pulumi.StringPtrInput `pulumi:"startTimeOffset"`
}

Ad break.

func (AdBreakArgs) ElementType 

func (AdBreakArgs) ElementType() reflect.Type

func (AdBreakArgs) ToAdBreakOutput 

func (i AdBreakArgs) ToAdBreakOutput() AdBreakOutput

func (AdBreakArgs) ToAdBreakOutputWithContext 

func (i AdBreakArgs) ToAdBreakOutputWithContext(ctx context.Context) AdBreakOutput

type AdBreakArray 

type AdBreakArray []AdBreakInput

func (AdBreakArray) ElementType 

func (AdBreakArray) ElementType() reflect.Type

func (AdBreakArray) ToAdBreakArrayOutput 

func (i AdBreakArray) ToAdBreakArrayOutput() AdBreakArrayOutput

func (AdBreakArray) ToAdBreakArrayOutputWithContext 

func (i AdBreakArray) ToAdBreakArrayOutputWithContext(ctx context.Context) AdBreakArrayOutput

type AdBreakArrayInput 

type AdBreakArrayInput interface {
	pulumi.Input

	ToAdBreakArrayOutput() AdBreakArrayOutput
	ToAdBreakArrayOutputWithContext(context.Context) AdBreakArrayOutput
}

AdBreakArrayInput is an input type that accepts AdBreakArray and AdBreakArrayOutput values. You can construct a concrete instance of `AdBreakArrayInput` via: 

AdBreakArray{ AdBreakArgs{...} }

type AdBreakArrayOutput 

type AdBreakArrayOutput struct{ *pulumi.OutputState }

func (AdBreakArrayOutput) ElementType 

func (AdBreakArrayOutput) ElementType() reflect.Type

func (AdBreakArrayOutput) Index 

func (o AdBreakArrayOutput) Index(i pulumi.IntInput) AdBreakOutput

func (AdBreakArrayOutput) ToAdBreakArrayOutput 

func (o AdBreakArrayOutput) ToAdBreakArrayOutput() AdBreakArrayOutput

func (AdBreakArrayOutput) ToAdBreakArrayOutputWithContext 

func (o AdBreakArrayOutput) ToAdBreakArrayOutputWithContext(ctx context.Context) AdBreakArrayOutput

type AdBreakInput 

type AdBreakInput interface {
	pulumi.Input

	ToAdBreakOutput() AdBreakOutput
	ToAdBreakOutputWithContext(context.Context) AdBreakOutput
}

AdBreakInput is an input type that accepts AdBreakArgs and AdBreakOutput values. You can construct a concrete instance of `AdBreakInput` via: 

AdBreakArgs{...}

type AdBreakOutput 

type AdBreakOutput struct{ *pulumi.OutputState }

Ad break.

func (AdBreakOutput) ElementType 

func (AdBreakOutput) ElementType() reflect.Type

func (AdBreakOutput) StartTimeOffset 

func (o AdBreakOutput) StartTimeOffset() pulumi.StringPtrOutput

Start time in seconds for the ad break, relative to the output file timeline. The default is `0s`.

func (AdBreakOutput) ToAdBreakOutput 

func (o AdBreakOutput) ToAdBreakOutput() AdBreakOutput

func (AdBreakOutput) ToAdBreakOutputWithContext 

func (o AdBreakOutput) ToAdBreakOutputWithContext(ctx context.Context) AdBreakOutput

type AdBreakResponse 

type AdBreakResponse struct {
	// Start time in seconds for the ad break, relative to the output file timeline. The default is `0s`.
	StartTimeOffset string `pulumi:"startTimeOffset"`
}

Ad break.

type AdBreakResponseArrayOutput 

type AdBreakResponseArrayOutput struct{ *pulumi.OutputState }

func (AdBreakResponseArrayOutput) ElementType 

func (AdBreakResponseArrayOutput) ElementType() reflect.Type

func (AdBreakResponseArrayOutput) Index 

func (o AdBreakResponseArrayOutput) Index(i pulumi.IntInput) AdBreakResponseOutput

func (AdBreakResponseArrayOutput) ToAdBreakResponseArrayOutput 

func (o AdBreakResponseArrayOutput) ToAdBreakResponseArrayOutput() AdBreakResponseArrayOutput

func (AdBreakResponseArrayOutput) ToAdBreakResponseArrayOutputWithContext 

func (o AdBreakResponseArrayOutput) ToAdBreakResponseArrayOutputWithContext(ctx context.Context) AdBreakResponseArrayOutput

type AdBreakResponseOutput 

type AdBreakResponseOutput struct{ *pulumi.OutputState }

Ad break.

func (AdBreakResponseOutput) ElementType 

func (AdBreakResponseOutput) ElementType() reflect.Type

func (AdBreakResponseOutput) StartTimeOffset 

func (o AdBreakResponseOutput) StartTimeOffset() pulumi.StringOutput

Start time in seconds for the ad break, relative to the output file timeline. The default is `0s`.

func (AdBreakResponseOutput) ToAdBreakResponseOutput 

func (o AdBreakResponseOutput) ToAdBreakResponseOutput() AdBreakResponseOutput

func (AdBreakResponseOutput) ToAdBreakResponseOutputWithContext 

func (o AdBreakResponseOutput) ToAdBreakResponseOutputWithContext(ctx context.Context) AdBreakResponseOutput

type Aes128Encryption added in v0.32.0 

type Aes128Encryption struct {
}

Configuration for AES-128 encryption.

type Aes128EncryptionArgs added in v0.32.0 

type Aes128EncryptionArgs struct {
}

Configuration for AES-128 encryption.

func (Aes128EncryptionArgs) ElementType added in v0.32.0 

func (Aes128EncryptionArgs) ElementType() reflect.Type

func (Aes128EncryptionArgs) ToAes128EncryptionOutput added in v0.32.0 

func (i Aes128EncryptionArgs) ToAes128EncryptionOutput() Aes128EncryptionOutput

func (Aes128EncryptionArgs) ToAes128EncryptionOutputWithContext added in v0.32.0 

func (i Aes128EncryptionArgs) ToAes128EncryptionOutputWithContext(ctx context.Context) Aes128EncryptionOutput

func (Aes128EncryptionArgs) ToAes128EncryptionPtrOutput added in v0.32.0 

func (i Aes128EncryptionArgs) ToAes128EncryptionPtrOutput() Aes128EncryptionPtrOutput

func (Aes128EncryptionArgs) ToAes128EncryptionPtrOutputWithContext added in v0.32.0 

func (i Aes128EncryptionArgs) ToAes128EncryptionPtrOutputWithContext(ctx context.Context) Aes128EncryptionPtrOutput

type Aes128EncryptionInput added in v0.32.0 

type Aes128EncryptionInput interface {
	pulumi.Input

	ToAes128EncryptionOutput() Aes128EncryptionOutput
	ToAes128EncryptionOutputWithContext(context.Context) Aes128EncryptionOutput
}

Aes128EncryptionInput is an input type that accepts Aes128EncryptionArgs and Aes128EncryptionOutput values. You can construct a concrete instance of `Aes128EncryptionInput` via: 

Aes128EncryptionArgs{...}

type Aes128EncryptionOutput added in v0.32.0 

type Aes128EncryptionOutput struct{ *pulumi.OutputState }

Configuration for AES-128 encryption.

func (Aes128EncryptionOutput) ElementType added in v0.32.0 

func (Aes128EncryptionOutput) ElementType() reflect.Type

func (Aes128EncryptionOutput) ToAes128EncryptionOutput added in v0.32.0 

func (o Aes128EncryptionOutput) ToAes128EncryptionOutput() Aes128EncryptionOutput

func (Aes128EncryptionOutput) ToAes128EncryptionOutputWithContext added in v0.32.0 

func (o Aes128EncryptionOutput) ToAes128EncryptionOutputWithContext(ctx context.Context) Aes128EncryptionOutput

func (Aes128EncryptionOutput) ToAes128EncryptionPtrOutput added in v0.32.0 

func (o Aes128EncryptionOutput) ToAes128EncryptionPtrOutput() Aes128EncryptionPtrOutput

func (Aes128EncryptionOutput) ToAes128EncryptionPtrOutputWithContext added in v0.32.0 

func (o Aes128EncryptionOutput) ToAes128EncryptionPtrOutputWithContext(ctx context.Context) Aes128EncryptionPtrOutput

type Aes128EncryptionPtrInput added in v0.32.0 

type Aes128EncryptionPtrInput interface {
	pulumi.Input

	ToAes128EncryptionPtrOutput() Aes128EncryptionPtrOutput
	ToAes128EncryptionPtrOutputWithContext(context.Context) Aes128EncryptionPtrOutput
}

Aes128EncryptionPtrInput is an input type that accepts Aes128EncryptionArgs, Aes128EncryptionPtr and Aes128EncryptionPtrOutput values. You can construct a concrete instance of `Aes128EncryptionPtrInput` via: 

        Aes128EncryptionArgs{...}

or:

        nil

func Aes128EncryptionPtr added in v0.32.0 

func Aes128EncryptionPtr(v *Aes128EncryptionArgs) Aes128EncryptionPtrInput

type Aes128EncryptionPtrOutput added in v0.32.0 

type Aes128EncryptionPtrOutput struct{ *pulumi.OutputState }

func (Aes128EncryptionPtrOutput) Elem added in v0.32.0 

func (o Aes128EncryptionPtrOutput) Elem() Aes128EncryptionOutput

func (Aes128EncryptionPtrOutput) ElementType added in v0.32.0 

func (Aes128EncryptionPtrOutput) ElementType() reflect.Type

func (Aes128EncryptionPtrOutput) ToAes128EncryptionPtrOutput added in v0.32.0 

func (o Aes128EncryptionPtrOutput) ToAes128EncryptionPtrOutput() Aes128EncryptionPtrOutput

func (Aes128EncryptionPtrOutput) ToAes128EncryptionPtrOutputWithContext added in v0.32.0 

func (o Aes128EncryptionPtrOutput) ToAes128EncryptionPtrOutputWithContext(ctx context.Context) Aes128EncryptionPtrOutput

type Aes128EncryptionResponse added in v0.32.0 

type Aes128EncryptionResponse struct {
}

Configuration for AES-128 encryption.

type Aes128EncryptionResponseOutput added in v0.32.0 

type Aes128EncryptionResponseOutput struct{ *pulumi.OutputState }

Configuration for AES-128 encryption.

func (Aes128EncryptionResponseOutput) ElementType added in v0.32.0 

func (Aes128EncryptionResponseOutput) ElementType() reflect.Type

func (Aes128EncryptionResponseOutput) ToAes128EncryptionResponseOutput added in v0.32.0 

func (o Aes128EncryptionResponseOutput) ToAes128EncryptionResponseOutput() Aes128EncryptionResponseOutput

func (Aes128EncryptionResponseOutput) ToAes128EncryptionResponseOutputWithContext added in v0.32.0 

func (o Aes128EncryptionResponseOutput) ToAes128EncryptionResponseOutputWithContext(ctx context.Context) Aes128EncryptionResponseOutput

type Animation 

type Animation struct {
	// End previous animation.
	AnimationEnd *AnimationEnd `pulumi:"animationEnd"`
	// Display overlay object with fade animation.
	AnimationFade *AnimationFade `pulumi:"animationFade"`
	// Display static overlay object.
	AnimationStatic *AnimationStatic `pulumi:"animationStatic"`
}

Animation types.

type AnimationArgs 

type AnimationArgs struct {
	// End previous animation.
	AnimationEnd AnimationEndPtrInput `pulumi:"animationEnd"`
	// Display overlay object with fade animation.
	AnimationFade AnimationFadePtrInput `pulumi:"animationFade"`
	// Display static overlay object.
	AnimationStatic AnimationStaticPtrInput `pulumi:"animationStatic"`
}

Animation types.

func (AnimationArgs) ElementType 

func (AnimationArgs) ElementType() reflect.Type

func (AnimationArgs) ToAnimationOutput 

func (i AnimationArgs) ToAnimationOutput() AnimationOutput

func (AnimationArgs) ToAnimationOutputWithContext 

func (i AnimationArgs) ToAnimationOutputWithContext(ctx context.Context) AnimationOutput

type AnimationArray 

type AnimationArray []AnimationInput

func (AnimationArray) ElementType 

func (AnimationArray) ElementType() reflect.Type

func (AnimationArray) ToAnimationArrayOutput 

func (i AnimationArray) ToAnimationArrayOutput() AnimationArrayOutput

func (AnimationArray) ToAnimationArrayOutputWithContext 

func (i AnimationArray) ToAnimationArrayOutputWithContext(ctx context.Context) AnimationArrayOutput

type AnimationArrayInput 

type AnimationArrayInput interface {
	pulumi.Input

	ToAnimationArrayOutput() AnimationArrayOutput
	ToAnimationArrayOutputWithContext(context.Context) AnimationArrayOutput
}

AnimationArrayInput is an input type that accepts AnimationArray and AnimationArrayOutput values. You can construct a concrete instance of `AnimationArrayInput` via: 

AnimationArray{ AnimationArgs{...} }

type AnimationArrayOutput 

type AnimationArrayOutput struct{ *pulumi.OutputState }

func (AnimationArrayOutput) ElementType 

func (AnimationArrayOutput) ElementType() reflect.Type

func (AnimationArrayOutput) Index 

func (o AnimationArrayOutput) Index(i pulumi.IntInput) AnimationOutput

func (AnimationArrayOutput) ToAnimationArrayOutput 

func (o AnimationArrayOutput) ToAnimationArrayOutput() AnimationArrayOutput

func (AnimationArrayOutput) ToAnimationArrayOutputWithContext 

func (o AnimationArrayOutput) ToAnimationArrayOutputWithContext(ctx context.Context) AnimationArrayOutput

type AnimationEnd 

type AnimationEnd struct {
	// The time to end overlay object, in seconds. Default: 0
	StartTimeOffset *string `pulumi:"startTimeOffset"`
}

End previous overlay animation from the video. Without `AnimationEnd`, the overlay object will keep the state of previous animation until the end of the video.

type AnimationEndArgs 

type AnimationEndArgs struct {
	// The time to end overlay object, in seconds. Default: 0
	StartTimeOffset pulumi.StringPtrInput `pulumi:"startTimeOffset"`
}

End previous overlay animation from the video. Without `AnimationEnd`, the overlay object will keep the state of previous animation until the end of the video.

func (AnimationEndArgs) ElementType 

func (AnimationEndArgs) ElementType() reflect.Type

func (AnimationEndArgs) ToAnimationEndOutput 

func (i AnimationEndArgs) ToAnimationEndOutput() AnimationEndOutput

func (AnimationEndArgs) ToAnimationEndOutputWithContext 

func (i AnimationEndArgs) ToAnimationEndOutputWithContext(ctx context.Context) AnimationEndOutput

func (AnimationEndArgs) ToAnimationEndPtrOutput 

func (i AnimationEndArgs) ToAnimationEndPtrOutput() AnimationEndPtrOutput

func (AnimationEndArgs) ToAnimationEndPtrOutputWithContext 

func (i AnimationEndArgs) ToAnimationEndPtrOutputWithContext(ctx context.Context) AnimationEndPtrOutput

type AnimationEndInput 

type AnimationEndInput interface {
	pulumi.Input

	ToAnimationEndOutput() AnimationEndOutput
	ToAnimationEndOutputWithContext(context.Context) AnimationEndOutput
}

AnimationEndInput is an input type that accepts AnimationEndArgs and AnimationEndOutput values. You can construct a concrete instance of `AnimationEndInput` via: 

AnimationEndArgs{...}

type AnimationEndOutput 

type AnimationEndOutput struct{ *pulumi.OutputState }

End previous overlay animation from the video. Without `AnimationEnd`, the overlay object will keep the state of previous animation until the end of the video.

func (AnimationEndOutput) ElementType 

func (AnimationEndOutput) ElementType() reflect.Type

func (AnimationEndOutput) StartTimeOffset 

func (o AnimationEndOutput) StartTimeOffset() pulumi.StringPtrOutput

The time to end overlay object, in seconds. Default: 0

func (AnimationEndOutput) ToAnimationEndOutput 

func (o AnimationEndOutput) ToAnimationEndOutput() AnimationEndOutput

func (AnimationEndOutput) ToAnimationEndOutputWithContext 

func (o AnimationEndOutput) ToAnimationEndOutputWithContext(ctx context.Context) AnimationEndOutput

func (AnimationEndOutput) ToAnimationEndPtrOutput 

func (o AnimationEndOutput) ToAnimationEndPtrOutput() AnimationEndPtrOutput

func (AnimationEndOutput) ToAnimationEndPtrOutputWithContext 

func (o AnimationEndOutput) ToAnimationEndPtrOutputWithContext(ctx context.Context) AnimationEndPtrOutput

type AnimationEndPtrInput 

type AnimationEndPtrInput interface {
	pulumi.Input

	ToAnimationEndPtrOutput() AnimationEndPtrOutput
	ToAnimationEndPtrOutputWithContext(context.Context) AnimationEndPtrOutput
}

AnimationEndPtrInput is an input type that accepts AnimationEndArgs, AnimationEndPtr and AnimationEndPtrOutput values. You can construct a concrete instance of `AnimationEndPtrInput` via: 

        AnimationEndArgs{...}

or:

        nil

func AnimationEndPtr 

func AnimationEndPtr(v *AnimationEndArgs) AnimationEndPtrInput

type AnimationEndPtrOutput 

type AnimationEndPtrOutput struct{ *pulumi.OutputState }

func (AnimationEndPtrOutput) Elem 

func (o AnimationEndPtrOutput) Elem() AnimationEndOutput

func (AnimationEndPtrOutput) ElementType 

func (AnimationEndPtrOutput) ElementType() reflect.Type

func (AnimationEndPtrOutput) StartTimeOffset 

func (o AnimationEndPtrOutput) StartTimeOffset() pulumi.StringPtrOutput

The time to end overlay object, in seconds. Default: 0

func (AnimationEndPtrOutput) ToAnimationEndPtrOutput 

func (o AnimationEndPtrOutput) ToAnimationEndPtrOutput() AnimationEndPtrOutput

func (AnimationEndPtrOutput) ToAnimationEndPtrOutputWithContext 

func (o AnimationEndPtrOutput) ToAnimationEndPtrOutputWithContext(ctx context.Context) AnimationEndPtrOutput

type AnimationEndResponse 

type AnimationEndResponse struct {
	// The time to end overlay object, in seconds. Default: 0
	StartTimeOffset string `pulumi:"startTimeOffset"`
}

End previous overlay animation from the video. Without `AnimationEnd`, the overlay object will keep the state of previous animation until the end of the video.

type AnimationEndResponseOutput 

type AnimationEndResponseOutput struct{ *pulumi.OutputState }

End previous overlay animation from the video. Without `AnimationEnd`, the overlay object will keep the state of previous animation until the end of the video.

func (AnimationEndResponseOutput) ElementType 

func (AnimationEndResponseOutput) ElementType() reflect.Type

func (AnimationEndResponseOutput) StartTimeOffset 

func (o AnimationEndResponseOutput) StartTimeOffset() pulumi.StringOutput

The time to end overlay object, in seconds. Default: 0

func (AnimationEndResponseOutput) ToAnimationEndResponseOutput 

func (o AnimationEndResponseOutput) ToAnimationEndResponseOutput() AnimationEndResponseOutput

func (AnimationEndResponseOutput) ToAnimationEndResponseOutputWithContext 

func (o AnimationEndResponseOutput) ToAnimationEndResponseOutputWithContext(ctx context.Context) AnimationEndResponseOutput

type AnimationFade 

type AnimationFade struct {
	// The time to end the fade animation, in seconds. Default: `start_time_offset` + 1s
	EndTimeOffset *string `pulumi:"endTimeOffset"`
	// Type of fade animation: `FADE_IN` or `FADE_OUT`.
	FadeType AnimationFadeFadeType `pulumi:"fadeType"`
	// The time to start the fade animation, in seconds. Default: 0
	StartTimeOffset *string `pulumi:"startTimeOffset"`
	// Normalized coordinates based on output video resolution. Valid values: `0.0`–`1.0`. `xy` is the upper-left coordinate of the overlay object. For example, use the x and y coordinates {0,0} to position the top-left corner of the overlay animation in the top-left corner of the output video.
	Xy *NormalizedCoordinate `pulumi:"xy"`
}

Display overlay object with fade animation.

type AnimationFadeArgs 

type AnimationFadeArgs struct {
	// The time to end the fade animation, in seconds. Default: `start_time_offset` + 1s
	EndTimeOffset pulumi.StringPtrInput `pulumi:"endTimeOffset"`
	// Type of fade animation: `FADE_IN` or `FADE_OUT`.
	FadeType AnimationFadeFadeTypeInput `pulumi:"fadeType"`
	// The time to start the fade animation, in seconds. Default: 0
	StartTimeOffset pulumi.StringPtrInput `pulumi:"startTimeOffset"`
	// Normalized coordinates based on output video resolution. Valid values: `0.0`–`1.0`. `xy` is the upper-left coordinate of the overlay object. For example, use the x and y coordinates {0,0} to position the top-left corner of the overlay animation in the top-left corner of the output video.
	Xy NormalizedCoordinatePtrInput `pulumi:"xy"`
}

Display overlay object with fade animation.

func (AnimationFadeArgs) ElementType 

func (AnimationFadeArgs) ElementType() reflect.Type

func (AnimationFadeArgs) ToAnimationFadeOutput 

func (i AnimationFadeArgs) ToAnimationFadeOutput() AnimationFadeOutput

func (AnimationFadeArgs) ToAnimationFadeOutputWithContext 

func (i AnimationFadeArgs) ToAnimationFadeOutputWithContext(ctx context.Context) AnimationFadeOutput

func (AnimationFadeArgs) ToAnimationFadePtrOutput 

func (i AnimationFadeArgs) ToAnimationFadePtrOutput() AnimationFadePtrOutput

func (AnimationFadeArgs) ToAnimationFadePtrOutputWithContext 

func (i AnimationFadeArgs) ToAnimationFadePtrOutputWithContext(ctx context.Context) AnimationFadePtrOutput

type AnimationFadeFadeType 

type AnimationFadeFadeType string

Required. Type of fade animation: `FADE_IN` or `FADE_OUT`.

func (AnimationFadeFadeType) ElementType 

func (AnimationFadeFadeType) ElementType() reflect.Type

func (AnimationFadeFadeType) ToAnimationFadeFadeTypeOutput 

func (e AnimationFadeFadeType) ToAnimationFadeFadeTypeOutput() AnimationFadeFadeTypeOutput

func (AnimationFadeFadeType) ToAnimationFadeFadeTypeOutputWithContext 

func (e AnimationFadeFadeType) ToAnimationFadeFadeTypeOutputWithContext(ctx context.Context) AnimationFadeFadeTypeOutput

func (AnimationFadeFadeType) ToAnimationFadeFadeTypePtrOutput 

func (e AnimationFadeFadeType) ToAnimationFadeFadeTypePtrOutput() AnimationFadeFadeTypePtrOutput

func (AnimationFadeFadeType) ToAnimationFadeFadeTypePtrOutputWithContext 

func (e AnimationFadeFadeType) ToAnimationFadeFadeTypePtrOutputWithContext(ctx context.Context) AnimationFadeFadeTypePtrOutput

func (AnimationFadeFadeType) ToStringOutput 

func (e AnimationFadeFadeType) ToStringOutput() pulumi.StringOutput

func (AnimationFadeFadeType) ToStringOutputWithContext 

func (e AnimationFadeFadeType) ToStringOutputWithContext(ctx context.Context) pulumi.StringOutput

func (AnimationFadeFadeType) ToStringPtrOutput 

func (e AnimationFadeFadeType) ToStringPtrOutput() pulumi.StringPtrOutput

func (AnimationFadeFadeType) ToStringPtrOutputWithContext 

func (e AnimationFadeFadeType) ToStringPtrOutputWithContext(ctx context.Context) pulumi.StringPtrOutput

type AnimationFadeFadeTypeInput 

type AnimationFadeFadeTypeInput interface {
	pulumi.Input

	ToAnimationFadeFadeTypeOutput() AnimationFadeFadeTypeOutput
	ToAnimationFadeFadeTypeOutputWithContext(context.Context) AnimationFadeFadeTypeOutput
}

AnimationFadeFadeTypeInput is an input type that accepts values of the AnimationFadeFadeType enum A concrete instance of `AnimationFadeFadeTypeInput` can be one of the following: 

AnimationFadeFadeTypeFadeTypeUnspecified
AnimationFadeFadeTypeFadeIn
AnimationFadeFadeTypeFadeOut

type AnimationFadeFadeTypeOutput 

type AnimationFadeFadeTypeOutput struct{ *pulumi.OutputState }

func (AnimationFadeFadeTypeOutput) ElementType 

func (AnimationFadeFadeTypeOutput) ElementType() reflect.Type

func (AnimationFadeFadeTypeOutput) ToAnimationFadeFadeTypeOutput 

func (o AnimationFadeFadeTypeOutput) ToAnimationFadeFadeTypeOutput() AnimationFadeFadeTypeOutput

func (AnimationFadeFadeTypeOutput) ToAnimationFadeFadeTypeOutputWithContext 

func (o AnimationFadeFadeTypeOutput) ToAnimationFadeFadeTypeOutputWithContext(ctx context.Context) AnimationFadeFadeTypeOutput

func (AnimationFadeFadeTypeOutput) ToAnimationFadeFadeTypePtrOutput 

func (o AnimationFadeFadeTypeOutput) ToAnimationFadeFadeTypePtrOutput() AnimationFadeFadeTypePtrOutput

func (AnimationFadeFadeTypeOutput) ToAnimationFadeFadeTypePtrOutputWithContext 

func (o AnimationFadeFadeTypeOutput) ToAnimationFadeFadeTypePtrOutputWithContext(ctx context.Context) AnimationFadeFadeTypePtrOutput

func (AnimationFadeFadeTypeOutput) ToStringOutput 

func (o AnimationFadeFadeTypeOutput) ToStringOutput() pulumi.StringOutput

func (AnimationFadeFadeTypeOutput) ToStringOutputWithContext 

func (o AnimationFadeFadeTypeOutput) ToStringOutputWithContext(ctx context.Context) pulumi.StringOutput

func (AnimationFadeFadeTypeOutput) ToStringPtrOutput 

func (o AnimationFadeFadeTypeOutput) ToStringPtrOutput() pulumi.StringPtrOutput

func (AnimationFadeFadeTypeOutput) ToStringPtrOutputWithContext 

func (o AnimationFadeFadeTypeOutput) ToStringPtrOutputWithContext(ctx context.Context) pulumi.StringPtrOutput

type AnimationFadeFadeTypePtrInput 

type AnimationFadeFadeTypePtrInput interface {
	pulumi.Input

	ToAnimationFadeFadeTypePtrOutput() AnimationFadeFadeTypePtrOutput
	ToAnimationFadeFadeTypePtrOutputWithContext(context.Context) AnimationFadeFadeTypePtrOutput
}

func AnimationFadeFadeTypePtr 

func AnimationFadeFadeTypePtr(v string) AnimationFadeFadeTypePtrInput

type AnimationFadeFadeTypePtrOutput 

type AnimationFadeFadeTypePtrOutput struct{ *pulumi.OutputState }

func (AnimationFadeFadeTypePtrOutput) Elem 

func (o AnimationFadeFadeTypePtrOutput) Elem() AnimationFadeFadeTypeOutput

func (AnimationFadeFadeTypePtrOutput) ElementType 

func (AnimationFadeFadeTypePtrOutput) ElementType() reflect.Type

func (AnimationFadeFadeTypePtrOutput) ToAnimationFadeFadeTypePtrOutput 

func (o AnimationFadeFadeTypePtrOutput) ToAnimationFadeFadeTypePtrOutput() AnimationFadeFadeTypePtrOutput

func (AnimationFadeFadeTypePtrOutput) ToAnimationFadeFadeTypePtrOutputWithContext 

func (o AnimationFadeFadeTypePtrOutput) ToAnimationFadeFadeTypePtrOutputWithContext(ctx context.Context) AnimationFadeFadeTypePtrOutput

func (AnimationFadeFadeTypePtrOutput) ToStringPtrOutput 

func (o AnimationFadeFadeTypePtrOutput) ToStringPtrOutput() pulumi.StringPtrOutput

func (AnimationFadeFadeTypePtrOutput) ToStringPtrOutputWithContext 

func (o AnimationFadeFadeTypePtrOutput) ToStringPtrOutputWithContext(ctx context.Context) pulumi.StringPtrOutput

type AnimationFadeInput 

type AnimationFadeInput interface {
	pulumi.Input

	ToAnimationFadeOutput() AnimationFadeOutput
	ToAnimationFadeOutputWithContext(context.Context) AnimationFadeOutput
}

AnimationFadeInput is an input type that accepts AnimationFadeArgs and AnimationFadeOutput values. You can construct a concrete instance of `AnimationFadeInput` via: 

AnimationFadeArgs{...}

type AnimationFadeOutput 

type AnimationFadeOutput struct{ *pulumi.OutputState }

Display overlay object with fade animation.

func (AnimationFadeOutput) ElementType 

func (AnimationFadeOutput) ElementType() reflect.Type

func (AnimationFadeOutput) EndTimeOffset 

func (o AnimationFadeOutput) EndTimeOffset() pulumi.StringPtrOutput

The time to end the fade animation, in seconds. Default: `start_time_offset` + 1s

func (AnimationFadeOutput) FadeType 

func (o AnimationFadeOutput) FadeType() AnimationFadeFadeTypeOutput

Type of fade animation: `FADE_IN` or `FADE_OUT`.

func (AnimationFadeOutput) StartTimeOffset 

func (o AnimationFadeOutput) StartTimeOffset() pulumi.StringPtrOutput

The time to start the fade animation, in seconds. Default: 0

func (AnimationFadeOutput) ToAnimationFadeOutput 

func (o AnimationFadeOutput) ToAnimationFadeOutput() AnimationFadeOutput

func (AnimationFadeOutput) ToAnimationFadeOutputWithContext 

func (o AnimationFadeOutput) ToAnimationFadeOutputWithContext(ctx context.Context) AnimationFadeOutput

func (AnimationFadeOutput) ToAnimationFadePtrOutput 

func (o AnimationFadeOutput) ToAnimationFadePtrOutput() AnimationFadePtrOutput

func (AnimationFadeOutput) ToAnimationFadePtrOutputWithContext 

func (o AnimationFadeOutput) ToAnimationFadePtrOutputWithContext(ctx context.Context) AnimationFadePtrOutput

func (AnimationFadeOutput) Xy 

func (o AnimationFadeOutput) Xy() NormalizedCoordinatePtrOutput

Normalized coordinates based on output video resolution. Valid values: `0.0`–`1.0`. `xy` is the upper-left coordinate of the overlay object. For example, use the x and y coordinates {0,0} to position the top-left corner of the overlay animation in the top-left corner of the output video.

type AnimationFadePtrInput 

type AnimationFadePtrInput interface {
	pulumi.Input

	ToAnimationFadePtrOutput() AnimationFadePtrOutput
	ToAnimationFadePtrOutputWithContext(context.Context) AnimationFadePtrOutput
}

AnimationFadePtrInput is an input type that accepts AnimationFadeArgs, AnimationFadePtr and AnimationFadePtrOutput values. You can construct a concrete instance of `AnimationFadePtrInput` via: 

        AnimationFadeArgs{...}

or:

        nil

func AnimationFadePtr 

func AnimationFadePtr(v *AnimationFadeArgs) AnimationFadePtrInput

type AnimationFadePtrOutput 

type AnimationFadePtrOutput struct{ *pulumi.OutputState }

func (AnimationFadePtrOutput) Elem 

func (o AnimationFadePtrOutput) Elem() AnimationFadeOutput

func (AnimationFadePtrOutput) ElementType 

func (AnimationFadePtrOutput) ElementType() reflect.Type

func (AnimationFadePtrOutput) EndTimeOffset 

func (o AnimationFadePtrOutput) EndTimeOffset() pulumi.StringPtrOutput

The time to end the fade animation, in seconds. Default: `start_time_offset` + 1s

func (AnimationFadePtrOutput) FadeType 

func (o AnimationFadePtrOutput) FadeType() AnimationFadeFadeTypePtrOutput

Type of fade animation: `FADE_IN` or `FADE_OUT`.

func (AnimationFadePtrOutput) StartTimeOffset 

func (o AnimationFadePtrOutput) StartTimeOffset() pulumi.StringPtrOutput

The time to start the fade animation, in seconds. Default: 0

func (AnimationFadePtrOutput) ToAnimationFadePtrOutput 

func (o AnimationFadePtrOutput) ToAnimationFadePtrOutput() AnimationFadePtrOutput

func (AnimationFadePtrOutput) ToAnimationFadePtrOutputWithContext 

func (o AnimationFadePtrOutput) ToAnimationFadePtrOutputWithContext(ctx context.Context) AnimationFadePtrOutput

func (AnimationFadePtrOutput) Xy 

func (o AnimationFadePtrOutput) Xy() NormalizedCoordinatePtrOutput

Normalized coordinates based on output video resolution. Valid values: `0.0`–`1.0`. `xy` is the upper-left coordinate of the overlay object. For example, use the x and y coordinates {0,0} to position the top-left corner of the overlay animation in the top-left corner of the output video.

type AnimationFadeResponse 

type AnimationFadeResponse struct {
	// The time to end the fade animation, in seconds. Default: `start_time_offset` + 1s
	EndTimeOffset string `pulumi:"endTimeOffset"`
	// Type of fade animation: `FADE_IN` or `FADE_OUT`.
	FadeType string `pulumi:"fadeType"`
	// The time to start the fade animation, in seconds. Default: 0
	StartTimeOffset string `pulumi:"startTimeOffset"`
	// Normalized coordinates based on output video resolution. Valid values: `0.0`–`1.0`. `xy` is the upper-left coordinate of the overlay object. For example, use the x and y coordinates {0,0} to position the top-left corner of the overlay animation in the top-left corner of the output video.
	Xy NormalizedCoordinateResponse `pulumi:"xy"`
}

Display overlay object with fade animation.

type AnimationFadeResponseOutput 

type AnimationFadeResponseOutput struct{ *pulumi.OutputState }

Display overlay object with fade animation.

func (AnimationFadeResponseOutput) ElementType 

func (AnimationFadeResponseOutput) ElementType() reflect.Type

func (AnimationFadeResponseOutput) EndTimeOffset 

func (o AnimationFadeResponseOutput) EndTimeOffset() pulumi.StringOutput

The time to end the fade animation, in seconds. Default: `start_time_offset` + 1s

func (AnimationFadeResponseOutput) FadeType 

func (o AnimationFadeResponseOutput) FadeType() pulumi.StringOutput

Type of fade animation: `FADE_IN` or `FADE_OUT`.

func (AnimationFadeResponseOutput) StartTimeOffset 

func (o AnimationFadeResponseOutput) StartTimeOffset() pulumi.StringOutput

The time to start the fade animation, in seconds. Default: 0

func (AnimationFadeResponseOutput) ToAnimationFadeResponseOutput 

func (o AnimationFadeResponseOutput) ToAnimationFadeResponseOutput() AnimationFadeResponseOutput

func (AnimationFadeResponseOutput) ToAnimationFadeResponseOutputWithContext 

func (o AnimationFadeResponseOutput) ToAnimationFadeResponseOutputWithContext(ctx context.Context) AnimationFadeResponseOutput

func (AnimationFadeResponseOutput) Xy 

func (o AnimationFadeResponseOutput) Xy() NormalizedCoordinateResponseOutput

Normalized coordinates based on output video resolution. Valid values: `0.0`–`1.0`. `xy` is the upper-left coordinate of the overlay object. For example, use the x and y coordinates {0,0} to position the top-left corner of the overlay animation in the top-left corner of the output video.

type AnimationInput 

type AnimationInput interface {
	pulumi.Input

	ToAnimationOutput() AnimationOutput
	ToAnimationOutputWithContext(context.Context) AnimationOutput
}

AnimationInput is an input type that accepts AnimationArgs and AnimationOutput values. You can construct a concrete instance of `AnimationInput` via: 

AnimationArgs{...}

type AnimationOutput 

type AnimationOutput struct{ *pulumi.OutputState }

Animation types.

func (AnimationOutput) AnimationEnd 

func (o AnimationOutput) AnimationEnd() AnimationEndPtrOutput

End previous animation.

func (AnimationOutput) AnimationFade 

func (o AnimationOutput) AnimationFade() AnimationFadePtrOutput

Display overlay object with fade animation.

func (AnimationOutput) AnimationStatic 

func (o AnimationOutput) AnimationStatic() AnimationStaticPtrOutput

Display static overlay object.

func (AnimationOutput) ElementType 

func (AnimationOutput) ElementType() reflect.Type

func (AnimationOutput) ToAnimationOutput 

func (o AnimationOutput) ToAnimationOutput() AnimationOutput

func (AnimationOutput) ToAnimationOutputWithContext 

func (o AnimationOutput) ToAnimationOutputWithContext(ctx context.Context) AnimationOutput

type AnimationResponse 

type AnimationResponse struct {
	// End previous animation.
	AnimationEnd AnimationEndResponse `pulumi:"animationEnd"`
	// Display overlay object with fade animation.
	AnimationFade AnimationFadeResponse `pulumi:"animationFade"`
	// Display static overlay object.
	AnimationStatic AnimationStaticResponse `pulumi:"animationStatic"`
}

Animation types.

type AnimationResponseArrayOutput 

type AnimationResponseArrayOutput struct{ *pulumi.OutputState }

func (AnimationResponseArrayOutput) ElementType 

func (AnimationResponseArrayOutput) ElementType() reflect.Type

func (AnimationResponseArrayOutput) Index 

func (o AnimationResponseArrayOutput) Index(i pulumi.IntInput) AnimationResponseOutput

func (AnimationResponseArrayOutput) ToAnimationResponseArrayOutput 

func (o AnimationResponseArrayOutput) ToAnimationResponseArrayOutput() AnimationResponseArrayOutput

func (AnimationResponseArrayOutput) ToAnimationResponseArrayOutputWithContext 

func (o AnimationResponseArrayOutput) ToAnimationResponseArrayOutputWithContext(ctx context.Context) AnimationResponseArrayOutput

type AnimationResponseOutput 

type AnimationResponseOutput struct{ *pulumi.OutputState }

Animation types.

func (AnimationResponseOutput) AnimationEnd 

func (o AnimationResponseOutput) AnimationEnd() AnimationEndResponseOutput

End previous animation.

func (AnimationResponseOutput) AnimationFade 

func (o AnimationResponseOutput) AnimationFade() AnimationFadeResponseOutput

Display overlay object with fade animation.

func (AnimationResponseOutput) AnimationStatic 

func (o AnimationResponseOutput) AnimationStatic() AnimationStaticResponseOutput

Display static overlay object.

func (AnimationResponseOutput) ElementType 

func (AnimationResponseOutput) ElementType() reflect.Type

func (AnimationResponseOutput) ToAnimationResponseOutput 

func (o AnimationResponseOutput) ToAnimationResponseOutput() AnimationResponseOutput

func (AnimationResponseOutput) ToAnimationResponseOutputWithContext 

func (o AnimationResponseOutput) ToAnimationResponseOutputWithContext(ctx context.Context) AnimationResponseOutput

type AnimationStatic 

type AnimationStatic struct {
	// The time to start displaying the overlay object, in seconds. Default: 0
	StartTimeOffset *string `pulumi:"startTimeOffset"`
	// Normalized coordinates based on output video resolution. Valid values: `0.0`–`1.0`. `xy` is the upper-left coordinate of the overlay object. For example, use the x and y coordinates {0,0} to position the top-left corner of the overlay animation in the top-left corner of the output video.
	Xy *NormalizedCoordinate `pulumi:"xy"`
}

Display static overlay object.

type AnimationStaticArgs 

type AnimationStaticArgs struct {
	// The time to start displaying the overlay object, in seconds. Default: 0
	StartTimeOffset pulumi.StringPtrInput `pulumi:"startTimeOffset"`
	// Normalized coordinates based on output video resolution. Valid values: `0.0`–`1.0`. `xy` is the upper-left coordinate of the overlay object. For example, use the x and y coordinates {0,0} to position the top-left corner of the overlay animation in the top-left corner of the output video.
	Xy NormalizedCoordinatePtrInput `pulumi:"xy"`
}

Display static overlay object.

func (AnimationStaticArgs) ElementType 

func (AnimationStaticArgs) ElementType() reflect.Type

func (AnimationStaticArgs) ToAnimationStaticOutput 

func (i AnimationStaticArgs) ToAnimationStaticOutput() AnimationStaticOutput

func (AnimationStaticArgs) ToAnimationStaticOutputWithContext 

func (i AnimationStaticArgs) ToAnimationStaticOutputWithContext(ctx context.Context) AnimationStaticOutput

func (AnimationStaticArgs) ToAnimationStaticPtrOutput 

func (i AnimationStaticArgs) ToAnimationStaticPtrOutput() AnimationStaticPtrOutput

func (AnimationStaticArgs) ToAnimationStaticPtrOutputWithContext 

func (i AnimationStaticArgs) ToAnimationStaticPtrOutputWithContext(ctx context.Context) AnimationStaticPtrOutput

type AnimationStaticInput 

type AnimationStaticInput interface {
	pulumi.Input

	ToAnimationStaticOutput() AnimationStaticOutput
	ToAnimationStaticOutputWithContext(context.Context) AnimationStaticOutput
}

AnimationStaticInput is an input type that accepts AnimationStaticArgs and AnimationStaticOutput values. You can construct a concrete instance of `AnimationStaticInput` via: 

AnimationStaticArgs{...}

type AnimationStaticOutput 

type AnimationStaticOutput struct{ *pulumi.OutputState }

Display static overlay object.

func (AnimationStaticOutput) ElementType 

func (AnimationStaticOutput) ElementType() reflect.Type

func (AnimationStaticOutput) StartTimeOffset 

func (o AnimationStaticOutput) StartTimeOffset() pulumi.StringPtrOutput

The time to start displaying the overlay object, in seconds. Default: 0

func (AnimationStaticOutput) ToAnimationStaticOutput 

func (o AnimationStaticOutput) ToAnimationStaticOutput() AnimationStaticOutput

func (AnimationStaticOutput) ToAnimationStaticOutputWithContext 

func (o AnimationStaticOutput) ToAnimationStaticOutputWithContext(ctx context.Context) AnimationStaticOutput

func (AnimationStaticOutput) ToAnimationStaticPtrOutput 

func (o AnimationStaticOutput) ToAnimationStaticPtrOutput() AnimationStaticPtrOutput

func (AnimationStaticOutput) ToAnimationStaticPtrOutputWithContext 

func (o AnimationStaticOutput) ToAnimationStaticPtrOutputWithContext(ctx context.Context) AnimationStaticPtrOutput

func (AnimationStaticOutput) Xy 

func (o AnimationStaticOutput) Xy() NormalizedCoordinatePtrOutput

Normalized coordinates based on output video resolution. Valid values: `0.0`–`1.0`. `xy` is the upper-left coordinate of the overlay object. For example, use the x and y coordinates {0,0} to position the top-left corner of the overlay animation in the top-left corner of the output video.

type AnimationStaticPtrInput 

type AnimationStaticPtrInput interface {
	pulumi.Input

	ToAnimationStaticPtrOutput() AnimationStaticPtrOutput
	ToAnimationStaticPtrOutputWithContext(context.Context) AnimationStaticPtrOutput
}

AnimationStaticPtrInput is an input type that accepts AnimationStaticArgs, AnimationStaticPtr and AnimationStaticPtrOutput values. You can construct a concrete instance of `AnimationStaticPtrInput` via: 

        AnimationStaticArgs{...}

or:

        nil

func AnimationStaticPtr 

func AnimationStaticPtr(v *AnimationStaticArgs) AnimationStaticPtrInput

type AnimationStaticPtrOutput 

type AnimationStaticPtrOutput struct{ *pulumi.OutputState }

func (AnimationStaticPtrOutput) Elem 

func (o AnimationStaticPtrOutput) Elem() AnimationStaticOutput

func (AnimationStaticPtrOutput) ElementType 

func (AnimationStaticPtrOutput) ElementType() reflect.Type

func (AnimationStaticPtrOutput) StartTimeOffset 

func (o AnimationStaticPtrOutput) StartTimeOffset() pulumi.StringPtrOutput

The time to start displaying the overlay object, in seconds. Default: 0

func (AnimationStaticPtrOutput) ToAnimationStaticPtrOutput 

func (o AnimationStaticPtrOutput) ToAnimationStaticPtrOutput() AnimationStaticPtrOutput

func (AnimationStaticPtrOutput) ToAnimationStaticPtrOutputWithContext 

func (o AnimationStaticPtrOutput) ToAnimationStaticPtrOutputWithContext(ctx context.Context) AnimationStaticPtrOutput

func (AnimationStaticPtrOutput) Xy 

func (o AnimationStaticPtrOutput) Xy() NormalizedCoordinatePtrOutput

Normalized coordinates based on output video resolution. Valid values: `0.0`–`1.0`. `xy` is the upper-left coordinate of the overlay object. For example, use the x and y coordinates {0,0} to position the top-left corner of the overlay animation in the top-left corner of the output video.

type AnimationStaticResponse 

type AnimationStaticResponse struct {
	// The time to start displaying the overlay object, in seconds. Default: 0
	StartTimeOffset string `pulumi:"startTimeOffset"`
	// Normalized coordinates based on output video resolution. Valid values: `0.0`–`1.0`. `xy` is the upper-left coordinate of the overlay object. For example, use the x and y coordinates {0,0} to position the top-left corner of the overlay animation in the top-left corner of the output video.
	Xy NormalizedCoordinateResponse `pulumi:"xy"`
}

Display static overlay object.

type AnimationStaticResponseOutput 

type AnimationStaticResponseOutput struct{ *pulumi.OutputState }

Display static overlay object.

func (AnimationStaticResponseOutput) ElementType 

func (AnimationStaticResponseOutput) ElementType() reflect.Type

func (AnimationStaticResponseOutput) StartTimeOffset 

func (o AnimationStaticResponseOutput) StartTimeOffset() pulumi.StringOutput

The time to start displaying the overlay object, in seconds. Default: 0

func (AnimationStaticResponseOutput) ToAnimationStaticResponseOutput 

func (o AnimationStaticResponseOutput) ToAnimationStaticResponseOutput() AnimationStaticResponseOutput

func (AnimationStaticResponseOutput) ToAnimationStaticResponseOutputWithContext 

func (o AnimationStaticResponseOutput) ToAnimationStaticResponseOutputWithContext(ctx context.Context) AnimationStaticResponseOutput

func (AnimationStaticResponseOutput) Xy 

func (o AnimationStaticResponseOutput) Xy() NormalizedCoordinateResponseOutput

Normalized coordinates based on output video resolution. Valid values: `0.0`–`1.0`. `xy` is the upper-left coordinate of the overlay object. For example, use the x and y coordinates {0,0} to position the top-left corner of the overlay animation in the top-left corner of the output video.

type Audio 

type Audio struct {
	// Enable boosting high frequency components. The default is `false`. **Note:** This field is not supported.
	HighBoost *bool `pulumi:"highBoost"`
	// Enable boosting low frequency components. The default is `false`. **Note:** This field is not supported.
	LowBoost *bool `pulumi:"lowBoost"`
	// Specify audio loudness normalization in loudness units relative to full scale (LUFS). Enter a value between -24 and 0 (the default), where: * -24 is the Advanced Television Systems Committee (ATSC A/85) standard * -23 is the EU R128 broadcast standard * -19 is the prior standard for online mono audio * -18 is the ReplayGain standard * -16 is the prior standard for stereo audio * -14 is the new online audio standard recommended by Spotify, as well as Amazon Echo * 0 disables normalization
	Lufs *float64 `pulumi:"lufs"`
}

Audio preprocessing configuration.

type AudioArgs 

type AudioArgs struct {
	// Enable boosting high frequency components. The default is `false`. **Note:** This field is not supported.
	HighBoost pulumi.BoolPtrInput `pulumi:"highBoost"`
	// Enable boosting low frequency components. The default is `false`. **Note:** This field is not supported.
	LowBoost pulumi.BoolPtrInput `pulumi:"lowBoost"`
	// Specify audio loudness normalization in loudness units relative to full scale (LUFS). Enter a value between -24 and 0 (the default), where: * -24 is the Advanced Television Systems Committee (ATSC A/85) standard * -23 is the EU R128 broadcast standard * -19 is the prior standard for online mono audio * -18 is the ReplayGain standard * -16 is the prior standard for stereo audio * -14 is the new online audio standard recommended by Spotify, as well as Amazon Echo * 0 disables normalization
	Lufs pulumi.Float64PtrInput `pulumi:"lufs"`
}

Audio preprocessing configuration.

func (AudioArgs) ElementType 

func (AudioArgs) ElementType() reflect.Type

func (AudioArgs) ToAudioOutput 

func (i AudioArgs) ToAudioOutput() AudioOutput

func (AudioArgs) ToAudioOutputWithContext 

func (i AudioArgs) ToAudioOutputWithContext(ctx context.Context) AudioOutput

func (AudioArgs) ToAudioPtrOutput 

func (i AudioArgs) ToAudioPtrOutput() AudioPtrOutput

func (AudioArgs) ToAudioPtrOutputWithContext 

func (i AudioArgs) ToAudioPtrOutputWithContext(ctx context.Context) AudioPtrOutput

type AudioInput 

type AudioInput interface {
	pulumi.Input

	ToAudioOutput() AudioOutput
	ToAudioOutputWithContext(context.Context) AudioOutput
}

AudioInput is an input type that accepts AudioArgs and AudioOutput values. You can construct a concrete instance of `AudioInput` via: 

AudioArgs{...}

type AudioMapping 

type AudioMapping struct {
	// The EditAtom.key that references the atom with audio inputs in the JobConfig.edit_list.
	AtomKey string `pulumi:"atomKey"`
	// Audio volume control in dB. Negative values decrease volume, positive values increase. The default is 0.
	GainDb *float64 `pulumi:"gainDb"`
	// The zero-based index of the channel in the input audio stream.
	InputChannel int `pulumi:"inputChannel"`
	// The Input.key that identifies the input file.
	InputKey string `pulumi:"inputKey"`
	// The zero-based index of the track in the input file.
	InputTrack int `pulumi:"inputTrack"`
	// The zero-based index of the channel in the output audio stream.
	OutputChannel int `pulumi:"outputChannel"`
}

The mapping for the JobConfig.edit_list atoms with audio EditAtom.inputs.

type AudioMappingArgs 

type AudioMappingArgs struct {
	// The EditAtom.key that references the atom with audio inputs in the JobConfig.edit_list.
	AtomKey pulumi.StringInput `pulumi:"atomKey"`
	// Audio volume control in dB. Negative values decrease volume, positive values increase. The default is 0.
	GainDb pulumi.Float64PtrInput `pulumi:"gainDb"`
	// The zero-based index of the channel in the input audio stream.
	InputChannel pulumi.IntInput `pulumi:"inputChannel"`
	// The Input.key that identifies the input file.
	InputKey pulumi.StringInput `pulumi:"inputKey"`
	// The zero-based index of the track in the input file.
	InputTrack pulumi.IntInput `pulumi:"inputTrack"`
	// The zero-based index of the channel in the output audio stream.
	OutputChannel pulumi.IntInput `pulumi:"outputChannel"`
}

The mapping for the JobConfig.edit_list atoms with audio EditAtom.inputs.

func (AudioMappingArgs) ElementType 

func (AudioMappingArgs) ElementType() reflect.Type

func (AudioMappingArgs) ToAudioMappingOutput 

func (i AudioMappingArgs) ToAudioMappingOutput() AudioMappingOutput

func (AudioMappingArgs) ToAudioMappingOutputWithContext 

func (i AudioMappingArgs) ToAudioMappingOutputWithContext(ctx context.Context) AudioMappingOutput

type AudioMappingArray 

type AudioMappingArray []AudioMappingInput

func (AudioMappingArray) ElementType 

func (AudioMappingArray) ElementType() reflect.Type

func (AudioMappingArray) ToAudioMappingArrayOutput 

func (i AudioMappingArray) ToAudioMappingArrayOutput() AudioMappingArrayOutput

func (AudioMappingArray) ToAudioMappingArrayOutputWithContext 

func (i AudioMappingArray) ToAudioMappingArrayOutputWithContext(ctx context.Context) AudioMappingArrayOutput

type AudioMappingArrayInput 

type AudioMappingArrayInput interface {
	pulumi.Input

	ToAudioMappingArrayOutput() AudioMappingArrayOutput
	ToAudioMappingArrayOutputWithContext(context.Context) AudioMappingArrayOutput
}

AudioMappingArrayInput is an input type that accepts AudioMappingArray and AudioMappingArrayOutput values. You can construct a concrete instance of `AudioMappingArrayInput` via: 

AudioMappingArray{ AudioMappingArgs{...} }

type AudioMappingArrayOutput 

type AudioMappingArrayOutput struct{ *pulumi.OutputState }

func (AudioMappingArrayOutput) ElementType 

func (AudioMappingArrayOutput) ElementType() reflect.Type

func (AudioMappingArrayOutput) Index 

func (o AudioMappingArrayOutput) Index(i pulumi.IntInput) AudioMappingOutput

func (AudioMappingArrayOutput) ToAudioMappingArrayOutput 

func (o AudioMappingArrayOutput) ToAudioMappingArrayOutput() AudioMappingArrayOutput

func (AudioMappingArrayOutput) ToAudioMappingArrayOutputWithContext 

func (o AudioMappingArrayOutput) ToAudioMappingArrayOutputWithContext(ctx context.Context) AudioMappingArrayOutput

type AudioMappingInput 

type AudioMappingInput interface {
	pulumi.Input

	ToAudioMappingOutput() AudioMappingOutput
	ToAudioMappingOutputWithContext(context.Context) AudioMappingOutput
}

AudioMappingInput is an input type that accepts AudioMappingArgs and AudioMappingOutput values. You can construct a concrete instance of `AudioMappingInput` via: 

AudioMappingArgs{...}

type AudioMappingOutput 

type AudioMappingOutput struct{ *pulumi.OutputState }

The mapping for the JobConfig.edit_list atoms with audio EditAtom.inputs.

func (AudioMappingOutput) AtomKey 

func (o AudioMappingOutput) AtomKey() pulumi.StringOutput

The EditAtom.key that references the atom with audio inputs in the JobConfig.edit_list.

func (AudioMappingOutput) ElementType 

func (AudioMappingOutput) ElementType() reflect.Type

func (AudioMappingOutput) GainDb 

func (o AudioMappingOutput) GainDb() pulumi.Float64PtrOutput

Audio volume control in dB. Negative values decrease volume, positive values increase. The default is 0.

func (AudioMappingOutput) InputChannel 

func (o AudioMappingOutput) InputChannel() pulumi.IntOutput

The zero-based index of the channel in the input audio stream.

func (AudioMappingOutput) InputKey 

func (o AudioMappingOutput) InputKey() pulumi.StringOutput

The Input.key that identifies the input file.

func (AudioMappingOutput) InputTrack 

func (o AudioMappingOutput) InputTrack() pulumi.IntOutput

The zero-based index of the track in the input file.

func (AudioMappingOutput) OutputChannel 

func (o AudioMappingOutput) OutputChannel() pulumi.IntOutput

The zero-based index of the channel in the output audio stream.

func (AudioMappingOutput) ToAudioMappingOutput 

func (o AudioMappingOutput) ToAudioMappingOutput() AudioMappingOutput

func (AudioMappingOutput) ToAudioMappingOutputWithContext 

func (o AudioMappingOutput) ToAudioMappingOutputWithContext(ctx context.Context) AudioMappingOutput

type AudioMappingResponse 

type AudioMappingResponse struct {
	// The EditAtom.key that references the atom with audio inputs in the JobConfig.edit_list.
	AtomKey string `pulumi:"atomKey"`
	// Audio volume control in dB. Negative values decrease volume, positive values increase. The default is 0.
	GainDb float64 `pulumi:"gainDb"`
	// The zero-based index of the channel in the input audio stream.
	InputChannel int `pulumi:"inputChannel"`
	// The Input.key that identifies the input file.
	InputKey string `pulumi:"inputKey"`
	// The zero-based index of the track in the input file.
	InputTrack int `pulumi:"inputTrack"`
	// The zero-based index of the channel in the output audio stream.
	OutputChannel int `pulumi:"outputChannel"`
}

The mapping for the JobConfig.edit_list atoms with audio EditAtom.inputs.

type AudioMappingResponseArrayOutput 

type AudioMappingResponseArrayOutput struct{ *pulumi.OutputState }

func (AudioMappingResponseArrayOutput) ElementType 

func (AudioMappingResponseArrayOutput) ElementType() reflect.Type

func (AudioMappingResponseArrayOutput) Index 

func (o AudioMappingResponseArrayOutput) Index(i pulumi.IntInput) AudioMappingResponseOutput

func (AudioMappingResponseArrayOutput) ToAudioMappingResponseArrayOutput 

func (o AudioMappingResponseArrayOutput) ToAudioMappingResponseArrayOutput() AudioMappingResponseArrayOutput

func (AudioMappingResponseArrayOutput) ToAudioMappingResponseArrayOutputWithContext 

func (o AudioMappingResponseArrayOutput) ToAudioMappingResponseArrayOutputWithContext(ctx context.Context) AudioMappingResponseArrayOutput

type AudioMappingResponseOutput 

type AudioMappingResponseOutput struct{ *pulumi.OutputState }

The mapping for the JobConfig.edit_list atoms with audio EditAtom.inputs.

func (AudioMappingResponseOutput) AtomKey 

func (o AudioMappingResponseOutput) AtomKey() pulumi.StringOutput

The EditAtom.key that references the atom with audio inputs in the JobConfig.edit_list.

func (AudioMappingResponseOutput) ElementType 

func (AudioMappingResponseOutput) ElementType() reflect.Type

func (AudioMappingResponseOutput) GainDb 

func (o AudioMappingResponseOutput) GainDb() pulumi.Float64Output

Audio volume control in dB. Negative values decrease volume, positive values increase. The default is 0.

func (AudioMappingResponseOutput) InputChannel 

func (o AudioMappingResponseOutput) InputChannel() pulumi.IntOutput

The zero-based index of the channel in the input audio stream.

func (AudioMappingResponseOutput) InputKey 

func (o AudioMappingResponseOutput) InputKey() pulumi.StringOutput

The Input.key that identifies the input file.

func (AudioMappingResponseOutput) InputTrack 

func (o AudioMappingResponseOutput) InputTrack() pulumi.IntOutput

The zero-based index of the track in the input file.

func (AudioMappingResponseOutput) OutputChannel 

func (o AudioMappingResponseOutput) OutputChannel() pulumi.IntOutput

The zero-based index of the channel in the output audio stream.

func (AudioMappingResponseOutput) ToAudioMappingResponseOutput 

func (o AudioMappingResponseOutput) ToAudioMappingResponseOutput() AudioMappingResponseOutput

func (AudioMappingResponseOutput) ToAudioMappingResponseOutputWithContext 

func (o AudioMappingResponseOutput) ToAudioMappingResponseOutputWithContext(ctx context.Context) AudioMappingResponseOutput

type AudioOutput 

type AudioOutput struct{ *pulumi.OutputState }

Audio preprocessing configuration.

func (AudioOutput) ElementType 

func (AudioOutput) ElementType() reflect.Type

func (AudioOutput) HighBoost 

func (o AudioOutput) HighBoost() pulumi.BoolPtrOutput

Enable boosting high frequency components. The default is `false`. **Note:** This field is not supported.

func (AudioOutput) LowBoost 

func (o AudioOutput) LowBoost() pulumi.BoolPtrOutput

Enable boosting low frequency components. The default is `false`. **Note:** This field is not supported.

func (AudioOutput) Lufs 

func (o AudioOutput) Lufs() pulumi.Float64PtrOutput

Specify audio loudness normalization in loudness units relative to full scale (LUFS). Enter a value between -24 and 0 (the default), where: * -24 is the Advanced Television Systems Committee (ATSC A/85) standard * -23 is the EU R128 broadcast standard * -19 is the prior standard for online mono audio * -18 is the ReplayGain standard * -16 is the prior standard for stereo audio * -14 is the new online audio standard recommended by Spotify, as well as Amazon Echo * 0 disables normalization

func (AudioOutput) ToAudioOutput 

func (o AudioOutput) ToAudioOutput() AudioOutput

func (AudioOutput) ToAudioOutputWithContext 

func (o AudioOutput) ToAudioOutputWithContext(ctx context.Context) AudioOutput

func (AudioOutput) ToAudioPtrOutput 

func (o AudioOutput) ToAudioPtrOutput() AudioPtrOutput

func (AudioOutput) ToAudioPtrOutputWithContext 

func (o AudioOutput) ToAudioPtrOutputWithContext(ctx context.Context) AudioPtrOutput

type AudioPtrInput 

type AudioPtrInput interface {
	pulumi.Input

	ToAudioPtrOutput() AudioPtrOutput
	ToAudioPtrOutputWithContext(context.Context) AudioPtrOutput
}

AudioPtrInput is an input type that accepts AudioArgs, AudioPtr and AudioPtrOutput values. You can construct a concrete instance of `AudioPtrInput` via: 

        AudioArgs{...}

or:

        nil

func AudioPtr 

func AudioPtr(v *AudioArgs) AudioPtrInput

type AudioPtrOutput 

type AudioPtrOutput struct{ *pulumi.OutputState }

func (AudioPtrOutput) Elem 

func (o AudioPtrOutput) Elem() AudioOutput

func (AudioPtrOutput) ElementType 

func (AudioPtrOutput) ElementType() reflect.Type

func (AudioPtrOutput) HighBoost 

func (o AudioPtrOutput) HighBoost() pulumi.BoolPtrOutput

Enable boosting high frequency components. The default is `false`. **Note:** This field is not supported.

func (AudioPtrOutput) LowBoost 

func (o AudioPtrOutput) LowBoost() pulumi.BoolPtrOutput

Enable boosting low frequency components. The default is `false`. **Note:** This field is not supported.

func (AudioPtrOutput) Lufs 

func (o AudioPtrOutput) Lufs() pulumi.Float64PtrOutput

Specify audio loudness normalization in loudness units relative to full scale (LUFS). Enter a value between -24 and 0 (the default), where: * -24 is the Advanced Television Systems Committee (ATSC A/85) standard * -23 is the EU R128 broadcast standard * -19 is the prior standard for online mono audio * -18 is the ReplayGain standard * -16 is the prior standard for stereo audio * -14 is the new online audio standard recommended by Spotify, as well as Amazon Echo * 0 disables normalization

func (AudioPtrOutput) ToAudioPtrOutput 

func (o AudioPtrOutput) ToAudioPtrOutput() AudioPtrOutput

func (AudioPtrOutput) ToAudioPtrOutputWithContext 

func (o AudioPtrOutput) ToAudioPtrOutputWithContext(ctx context.Context) AudioPtrOutput

type AudioResponse 

type AudioResponse struct {
	// Enable boosting high frequency components. The default is `false`. **Note:** This field is not supported.
	HighBoost bool `pulumi:"highBoost"`
	// Enable boosting low frequency components. The default is `false`. **Note:** This field is not supported.
	LowBoost bool `pulumi:"lowBoost"`
	// Specify audio loudness normalization in loudness units relative to full scale (LUFS). Enter a value between -24 and 0 (the default), where: * -24 is the Advanced Television Systems Committee (ATSC A/85) standard * -23 is the EU R128 broadcast standard * -19 is the prior standard for online mono audio * -18 is the ReplayGain standard * -16 is the prior standard for stereo audio * -14 is the new online audio standard recommended by Spotify, as well as Amazon Echo * 0 disables normalization
	Lufs float64 `pulumi:"lufs"`
}

Audio preprocessing configuration.

type AudioResponseOutput 

type AudioResponseOutput struct{ *pulumi.OutputState }

Audio preprocessing configuration.

func (AudioResponseOutput) ElementType 

func (AudioResponseOutput) ElementType() reflect.Type

func (AudioResponseOutput) HighBoost 

func (o AudioResponseOutput) HighBoost() pulumi.BoolOutput

Enable boosting high frequency components. The default is `false`. **Note:** This field is not supported.

func (AudioResponseOutput) LowBoost 

func (o AudioResponseOutput) LowBoost() pulumi.BoolOutput

Enable boosting low frequency components. The default is `false`. **Note:** This field is not supported.

func (AudioResponseOutput) Lufs 

func (o AudioResponseOutput) Lufs() pulumi.Float64Output

Specify audio loudness normalization in loudness units relative to full scale (LUFS). Enter a value between -24 and 0 (the default), where: * -24 is the Advanced Television Systems Committee (ATSC A/85) standard * -23 is the EU R128 broadcast standard * -19 is the prior standard for online mono audio * -18 is the ReplayGain standard * -16 is the prior standard for stereo audio * -14 is the new online audio standard recommended by Spotify, as well as Amazon Echo * 0 disables normalization

func (AudioResponseOutput) ToAudioResponseOutput 

func (o AudioResponseOutput) ToAudioResponseOutput() AudioResponseOutput

func (AudioResponseOutput) ToAudioResponseOutputWithContext 

func (o AudioResponseOutput) ToAudioResponseOutputWithContext(ctx context.Context) AudioResponseOutput

type AudioStream 

type AudioStream struct {
	// Audio bitrate in bits per second. Must be between 1 and 10,000,000.
	BitrateBps int `pulumi:"bitrateBps"`
	// Number of audio channels. Must be between 1 and 6. The default is 2.
	ChannelCount *int `pulumi:"channelCount"`
	// A list of channel names specifying layout of the audio channels. This only affects the metadata embedded in the container headers, if supported by the specified format. The default is `["fl", "fr"]`. Supported channel names: - `fl` - Front left channel - `fr` - Front right channel - `sl` - Side left channel - `sr` - Side right channel - `fc` - Front center channel - `lfe` - Low frequency
	ChannelLayout []string `pulumi:"channelLayout"`
	// The codec for this audio stream. The default is `aac`. Supported audio codecs: - `aac` - `aac-he` - `aac-he-v2` - `mp3` - `ac3` - `eac3`
	Codec *string `pulumi:"codec"`
	// The name for this particular audio stream that will be added to the HLS/DASH manifest. Not supported in MP4 files.
	DisplayName *string `pulumi:"displayName"`
	// The BCP-47 language code, such as `en-US` or `sr-Latn`. For more information, see https://www.unicode.org/reports/tr35/#Unicode_locale_identifier. Not supported in MP4 files.
	LanguageCode *string `pulumi:"languageCode"`
	// The mapping for the JobConfig.edit_list atoms with audio EditAtom.inputs.
	Mapping []AudioMapping `pulumi:"mapping"`
	// The audio sample rate in Hertz. The default is 48000 Hertz.
	SampleRateHertz *int `pulumi:"sampleRateHertz"`
}

Audio stream resource.

type AudioStreamArgs 

type AudioStreamArgs struct {
	// Audio bitrate in bits per second. Must be between 1 and 10,000,000.
	BitrateBps pulumi.IntInput `pulumi:"bitrateBps"`
	// Number of audio channels. Must be between 1 and 6. The default is 2.
	ChannelCount pulumi.IntPtrInput `pulumi:"channelCount"`
	// A list of channel names specifying layout of the audio channels. This only affects the metadata embedded in the container headers, if supported by the specified format. The default is `["fl", "fr"]`. Supported channel names: - `fl` - Front left channel - `fr` - Front right channel - `sl` - Side left channel - `sr` - Side right channel - `fc` - Front center channel - `lfe` - Low frequency
	ChannelLayout pulumi.StringArrayInput `pulumi:"channelLayout"`
	// The codec for this audio stream. The default is `aac`. Supported audio codecs: - `aac` - `aac-he` - `aac-he-v2` - `mp3` - `ac3` - `eac3`
	Codec pulumi.StringPtrInput `pulumi:"codec"`
	// The name for this particular audio stream that will be added to the HLS/DASH manifest. Not supported in MP4 files.
	DisplayName pulumi.StringPtrInput `pulumi:"displayName"`
	// The BCP-47 language code, such as `en-US` or `sr-Latn`. For more information, see https://www.unicode.org/reports/tr35/#Unicode_locale_identifier. Not supported in MP4 files.
	LanguageCode pulumi.StringPtrInput `pulumi:"languageCode"`
	// The mapping for the JobConfig.edit_list atoms with audio EditAtom.inputs.
	Mapping AudioMappingArrayInput `pulumi:"mapping"`
	// The audio sample rate in Hertz. The default is 48000 Hertz.
	SampleRateHertz pulumi.IntPtrInput `pulumi:"sampleRateHertz"`
}

Audio stream resource.

func (AudioStreamArgs) ElementType 

func (AudioStreamArgs) ElementType() reflect.Type

func (AudioStreamArgs) ToAudioStreamOutput 

func (i AudioStreamArgs) ToAudioStreamOutput() AudioStreamOutput

func (AudioStreamArgs) ToAudioStreamOutputWithContext 

func (i AudioStreamArgs) ToAudioStreamOutputWithContext(ctx context.Context) AudioStreamOutput

func (AudioStreamArgs) ToAudioStreamPtrOutput 

func (i AudioStreamArgs) ToAudioStreamPtrOutput() AudioStreamPtrOutput

func (AudioStreamArgs) ToAudioStreamPtrOutputWithContext 

func (i AudioStreamArgs) ToAudioStreamPtrOutputWithContext(ctx context.Context) AudioStreamPtrOutput

type AudioStreamInput 

type AudioStreamInput interface {
	pulumi.Input

	ToAudioStreamOutput() AudioStreamOutput
	ToAudioStreamOutputWithContext(context.Context) AudioStreamOutput
}

AudioStreamInput is an input type that accepts AudioStreamArgs and AudioStreamOutput values. You can construct a concrete instance of `AudioStreamInput` via: 

AudioStreamArgs{...}

type AudioStreamOutput 

type AudioStreamOutput struct{ *pulumi.OutputState }

Audio stream resource.

func (AudioStreamOutput) BitrateBps 

func (o AudioStreamOutput) BitrateBps() pulumi.IntOutput

Audio bitrate in bits per second. Must be between 1 and 10,000,000.

func (AudioStreamOutput) ChannelCount 

func (o AudioStreamOutput) ChannelCount() pulumi.IntPtrOutput

Number of audio channels. Must be between 1 and 6. The default is 2.

func (AudioStreamOutput) ChannelLayout 

func (o AudioStreamOutput) ChannelLayout() pulumi.StringArrayOutput

A list of channel names specifying layout of the audio channels. This only affects the metadata embedded in the container headers, if supported by the specified format. The default is `["fl", "fr"]`. Supported channel names: - `fl` - Front left channel - `fr` - Front right channel - `sl` - Side left channel - `sr` - Side right channel - `fc` - Front center channel - `lfe` - Low frequency

func (AudioStreamOutput) Codec 

func (o AudioStreamOutput) Codec() pulumi.StringPtrOutput

The codec for this audio stream. The default is `aac`. Supported audio codecs: - `aac` - `aac-he` - `aac-he-v2` - `mp3` - `ac3` - `eac3`

func (AudioStreamOutput) DisplayName added in v0.29.0 

func (o AudioStreamOutput) DisplayName() pulumi.StringPtrOutput

The name for this particular audio stream that will be added to the HLS/DASH manifest. Not supported in MP4 files.

func (AudioStreamOutput) ElementType 

func (AudioStreamOutput) ElementType() reflect.Type

func (AudioStreamOutput) LanguageCode added in v0.29.0 

func (o AudioStreamOutput) LanguageCode() pulumi.StringPtrOutput

The BCP-47 language code, such as `en-US` or `sr-Latn`. For more information, see https://www.unicode.org/reports/tr35/#Unicode_locale_identifier. Not supported in MP4 files.

func (AudioStreamOutput) Mapping 

func (o AudioStreamOutput) Mapping() AudioMappingArrayOutput

The mapping for the JobConfig.edit_list atoms with audio EditAtom.inputs.

func (AudioStreamOutput) SampleRateHertz 

func (o AudioStreamOutput) SampleRateHertz() pulumi.IntPtrOutput

The audio sample rate in Hertz. The default is 48000 Hertz.

func (AudioStreamOutput) ToAudioStreamOutput 

func (o AudioStreamOutput) ToAudioStreamOutput() AudioStreamOutput

func (AudioStreamOutput) ToAudioStreamOutputWithContext 

func (o AudioStreamOutput) ToAudioStreamOutputWithContext(ctx context.Context) AudioStreamOutput

func (AudioStreamOutput) ToAudioStreamPtrOutput 

func (o AudioStreamOutput) ToAudioStreamPtrOutput() AudioStreamPtrOutput

func (AudioStreamOutput) ToAudioStreamPtrOutputWithContext 

func (o AudioStreamOutput) ToAudioStreamPtrOutputWithContext(ctx context.Context) AudioStreamPtrOutput

type AudioStreamPtrInput 

type AudioStreamPtrInput interface {
	pulumi.Input

	ToAudioStreamPtrOutput() AudioStreamPtrOutput
	ToAudioStreamPtrOutputWithContext(context.Context) AudioStreamPtrOutput
}

AudioStreamPtrInput is an input type that accepts AudioStreamArgs, AudioStreamPtr and AudioStreamPtrOutput values. You can construct a concrete instance of `AudioStreamPtrInput` via: 

        AudioStreamArgs{...}

or:

        nil

func AudioStreamPtr 

func AudioStreamPtr(v *AudioStreamArgs) AudioStreamPtrInput

type AudioStreamPtrOutput 

type AudioStreamPtrOutput struct{ *pulumi.OutputState }

func (AudioStreamPtrOutput) BitrateBps 

func (o AudioStreamPtrOutput) BitrateBps() pulumi.IntPtrOutput

Audio bitrate in bits per second. Must be between 1 and 10,000,000.

func (AudioStreamPtrOutput) ChannelCount 

func (o AudioStreamPtrOutput) ChannelCount() pulumi.IntPtrOutput

Number of audio channels. Must be between 1 and 6. The default is 2.

func (AudioStreamPtrOutput) ChannelLayout 

func (o AudioStreamPtrOutput) ChannelLayout() pulumi.StringArrayOutput

A list of channel names specifying layout of the audio channels. This only affects the metadata embedded in the container headers, if supported by the specified format. The default is `["fl", "fr"]`. Supported channel names: - `fl` - Front left channel - `fr` - Front right channel - `sl` - Side left channel - `sr` - Side right channel - `fc` - Front center channel - `lfe` - Low frequency

func (AudioStreamPtrOutput) Codec 

func (o AudioStreamPtrOutput) Codec() pulumi.StringPtrOutput

The codec for this audio stream. The default is `aac`. Supported audio codecs: - `aac` - `aac-he` - `aac-he-v2` - `mp3` - `ac3` - `eac3`

func (AudioStreamPtrOutput) DisplayName added in v0.29.0 

func (o AudioStreamPtrOutput) DisplayName() pulumi.StringPtrOutput

The name for this particular audio stream that will be added to the HLS/DASH manifest. Not supported in MP4 files.

func (AudioStreamPtrOutput) Elem 

func (o AudioStreamPtrOutput) Elem() AudioStreamOutput

func (AudioStreamPtrOutput) ElementType 

func (AudioStreamPtrOutput) ElementType() reflect.Type

func (AudioStreamPtrOutput) LanguageCode added in v0.29.0 

func (o AudioStreamPtrOutput) LanguageCode() pulumi.StringPtrOutput

The BCP-47 language code, such as `en-US` or `sr-Latn`. For more information, see https://www.unicode.org/reports/tr35/#Unicode_locale_identifier. Not supported in MP4 files.

func (AudioStreamPtrOutput) Mapping 

func (o AudioStreamPtrOutput) Mapping() AudioMappingArrayOutput

The mapping for the JobConfig.edit_list atoms with audio EditAtom.inputs.

func (AudioStreamPtrOutput) SampleRateHertz 

func (o AudioStreamPtrOutput) SampleRateHertz() pulumi.IntPtrOutput

The audio sample rate in Hertz. The default is 48000 Hertz.

func (AudioStreamPtrOutput) ToAudioStreamPtrOutput 

func (o AudioStreamPtrOutput) ToAudioStreamPtrOutput() AudioStreamPtrOutput

func (AudioStreamPtrOutput) ToAudioStreamPtrOutputWithContext 

func (o AudioStreamPtrOutput) ToAudioStreamPtrOutputWithContext(ctx context.Context) AudioStreamPtrOutput

type AudioStreamResponse 

type AudioStreamResponse struct {
	// Audio bitrate in bits per second. Must be between 1 and 10,000,000.
	BitrateBps int `pulumi:"bitrateBps"`
	// Number of audio channels. Must be between 1 and 6. The default is 2.
	ChannelCount int `pulumi:"channelCount"`
	// A list of channel names specifying layout of the audio channels. This only affects the metadata embedded in the container headers, if supported by the specified format. The default is `["fl", "fr"]`. Supported channel names: - `fl` - Front left channel - `fr` - Front right channel - `sl` - Side left channel - `sr` - Side right channel - `fc` - Front center channel - `lfe` - Low frequency
	ChannelLayout []string `pulumi:"channelLayout"`
	// The codec for this audio stream. The default is `aac`. Supported audio codecs: - `aac` - `aac-he` - `aac-he-v2` - `mp3` - `ac3` - `eac3`
	Codec string `pulumi:"codec"`
	// The name for this particular audio stream that will be added to the HLS/DASH manifest. Not supported in MP4 files.
	DisplayName string `pulumi:"displayName"`
	// The BCP-47 language code, such as `en-US` or `sr-Latn`. For more information, see https://www.unicode.org/reports/tr35/#Unicode_locale_identifier. Not supported in MP4 files.
	LanguageCode string `pulumi:"languageCode"`
	// The mapping for the JobConfig.edit_list atoms with audio EditAtom.inputs.
	Mapping []AudioMappingResponse `pulumi:"mapping"`
	// The audio sample rate in Hertz. The default is 48000 Hertz.
	SampleRateHertz int `pulumi:"sampleRateHertz"`
}

Audio stream resource.

type AudioStreamResponseOutput 

type AudioStreamResponseOutput struct{ *pulumi.OutputState }

Audio stream resource.

func (AudioStreamResponseOutput) BitrateBps 

func (o AudioStreamResponseOutput) BitrateBps() pulumi.IntOutput

Audio bitrate in bits per second. Must be between 1 and 10,000,000.

func (AudioStreamResponseOutput) ChannelCount 

func (o AudioStreamResponseOutput) ChannelCount() pulumi.IntOutput

Number of audio channels. Must be between 1 and 6. The default is 2.

func (AudioStreamResponseOutput) ChannelLayout 

func (o AudioStreamResponseOutput) ChannelLayout() pulumi.StringArrayOutput

A list of channel names specifying layout of the audio channels. This only affects the metadata embedded in the container headers, if supported by the specified format. The default is `["fl", "fr"]`. Supported channel names: - `fl` - Front left channel - `fr` - Front right channel - `sl` - Side left channel - `sr` - Side right channel - `fc` - Front center channel - `lfe` - Low frequency

func (AudioStreamResponseOutput) Codec 

func (o AudioStreamResponseOutput) Codec() pulumi.StringOutput

The codec for this audio stream. The default is `aac`. Supported audio codecs: - `aac` - `aac-he` - `aac-he-v2` - `mp3` - `ac3` - `eac3`

func (AudioStreamResponseOutput) DisplayName added in v0.29.0 

func (o AudioStreamResponseOutput) DisplayName() pulumi.StringOutput

The name for this particular audio stream that will be added to the HLS/DASH manifest. Not supported in MP4 files.

func (AudioStreamResponseOutput) ElementType 

func (AudioStreamResponseOutput) ElementType() reflect.Type

func (AudioStreamResponseOutput) LanguageCode added in v0.29.0 

func (o AudioStreamResponseOutput) LanguageCode() pulumi.StringOutput

The BCP-47 language code, such as `en-US` or `sr-Latn`. For more information, see https://www.unicode.org/reports/tr35/#Unicode_locale_identifier. Not supported in MP4 files.

func (AudioStreamResponseOutput) Mapping 

func (o AudioStreamResponseOutput) Mapping() AudioMappingResponseArrayOutput

The mapping for the JobConfig.edit_list atoms with audio EditAtom.inputs.

func (AudioStreamResponseOutput) SampleRateHertz 

func (o AudioStreamResponseOutput) SampleRateHertz() pulumi.IntOutput

The audio sample rate in Hertz. The default is 48000 Hertz.

func (AudioStreamResponseOutput) ToAudioStreamResponseOutput 

func (o AudioStreamResponseOutput) ToAudioStreamResponseOutput() AudioStreamResponseOutput

func (AudioStreamResponseOutput) ToAudioStreamResponseOutputWithContext 

func (o AudioStreamResponseOutput) ToAudioStreamResponseOutputWithContext(ctx context.Context) AudioStreamResponseOutput

type BwdifConfig added in v0.24.0 

type BwdifConfig struct {
	// Deinterlace all frames rather than just the frames identified as interlaced. The default is `false`.
	DeinterlaceAllFrames *bool `pulumi:"deinterlaceAllFrames"`
	// Specifies the deinterlacing mode to adopt. The default is `send_frame`. Supported values: - `send_frame`: Output one frame for each frame - `send_field`: Output one frame for each field
	Mode *string `pulumi:"mode"`
	// The picture field parity assumed for the input interlaced video. The default is `auto`. Supported values: - `tff`: Assume the top field is first - `bff`: Assume the bottom field is first - `auto`: Enable automatic detection of field parity
	Parity *string `pulumi:"parity"`
}

Bob Weaver Deinterlacing Filter Configuration.

type BwdifConfigArgs added in v0.24.0 

type BwdifConfigArgs struct {
	// Deinterlace all frames rather than just the frames identified as interlaced. The default is `false`.
	DeinterlaceAllFrames pulumi.BoolPtrInput `pulumi:"deinterlaceAllFrames"`
	// Specifies the deinterlacing mode to adopt. The default is `send_frame`. Supported values: - `send_frame`: Output one frame for each frame - `send_field`: Output one frame for each field
	Mode pulumi.StringPtrInput `pulumi:"mode"`
	// The picture field parity assumed for the input interlaced video. The default is `auto`. Supported values: - `tff`: Assume the top field is first - `bff`: Assume the bottom field is first - `auto`: Enable automatic detection of field parity
	Parity pulumi.StringPtrInput `pulumi:"parity"`
}

Bob Weaver Deinterlacing Filter Configuration.

func (BwdifConfigArgs) ElementType added in v0.24.0 

func (BwdifConfigArgs) ElementType() reflect.Type

func (BwdifConfigArgs) ToBwdifConfigOutput added in v0.24.0 

func (i BwdifConfigArgs) ToBwdifConfigOutput() BwdifConfigOutput

func (BwdifConfigArgs) ToBwdifConfigOutputWithContext added in v0.24.0 

func (i BwdifConfigArgs) ToBwdifConfigOutputWithContext(ctx context.Context) BwdifConfigOutput

func (BwdifConfigArgs) ToBwdifConfigPtrOutput added in v0.24.0 

func (i BwdifConfigArgs) ToBwdifConfigPtrOutput() BwdifConfigPtrOutput

func (BwdifConfigArgs) ToBwdifConfigPtrOutputWithContext added in v0.24.0 

func (i BwdifConfigArgs) ToBwdifConfigPtrOutputWithContext(ctx context.Context) BwdifConfigPtrOutput

type BwdifConfigInput added in v0.24.0 

type BwdifConfigInput interface {
	pulumi.Input

	ToBwdifConfigOutput() BwdifConfigOutput
	ToBwdifConfigOutputWithContext(context.Context) BwdifConfigOutput
}

BwdifConfigInput is an input type that accepts BwdifConfigArgs and BwdifConfigOutput values. You can construct a concrete instance of `BwdifConfigInput` via: 

BwdifConfigArgs{...}

type BwdifConfigOutput added in v0.24.0 

type BwdifConfigOutput struct{ *pulumi.OutputState }

Bob Weaver Deinterlacing Filter Configuration.

func (BwdifConfigOutput) DeinterlaceAllFrames added in v0.24.0 

func (o BwdifConfigOutput) DeinterlaceAllFrames() pulumi.BoolPtrOutput

Deinterlace all frames rather than just the frames identified as interlaced. The default is `false`.

func (BwdifConfigOutput) ElementType added in v0.24.0 

func (BwdifConfigOutput) ElementType() reflect.Type

func (BwdifConfigOutput) Mode added in v0.24.0 

func (o BwdifConfigOutput) Mode() pulumi.StringPtrOutput

Specifies the deinterlacing mode to adopt. The default is `send_frame`. Supported values: - `send_frame`: Output one frame for each frame - `send_field`: Output one frame for each field

func (BwdifConfigOutput) Parity added in v0.24.0 

func (o BwdifConfigOutput) Parity() pulumi.StringPtrOutput

The picture field parity assumed for the input interlaced video. The default is `auto`. Supported values: - `tff`: Assume the top field is first - `bff`: Assume the bottom field is first - `auto`: Enable automatic detection of field parity

func (BwdifConfigOutput) ToBwdifConfigOutput added in v0.24.0 

func (o BwdifConfigOutput) ToBwdifConfigOutput() BwdifConfigOutput

func (BwdifConfigOutput) ToBwdifConfigOutputWithContext added in v0.24.0 

func (o BwdifConfigOutput) ToBwdifConfigOutputWithContext(ctx context.Context) BwdifConfigOutput

func (BwdifConfigOutput) ToBwdifConfigPtrOutput added in v0.24.0 

func (o BwdifConfigOutput) ToBwdifConfigPtrOutput() BwdifConfigPtrOutput

func (BwdifConfigOutput) ToBwdifConfigPtrOutputWithContext added in v0.24.0 

func (o BwdifConfigOutput) ToBwdifConfigPtrOutputWithContext(ctx context.Context) BwdifConfigPtrOutput

type BwdifConfigPtrInput added in v0.24.0 

type BwdifConfigPtrInput interface {
	pulumi.Input

	ToBwdifConfigPtrOutput() BwdifConfigPtrOutput
	ToBwdifConfigPtrOutputWithContext(context.Context) BwdifConfigPtrOutput
}

BwdifConfigPtrInput is an input type that accepts BwdifConfigArgs, BwdifConfigPtr and BwdifConfigPtrOutput values. You can construct a concrete instance of `BwdifConfigPtrInput` via: 

        BwdifConfigArgs{...}

or:

        nil

func BwdifConfigPtr added in v0.24.0 

func BwdifConfigPtr(v *BwdifConfigArgs) BwdifConfigPtrInput

type BwdifConfigPtrOutput added in v0.24.0 

type BwdifConfigPtrOutput struct{ *pulumi.OutputState }

func (BwdifConfigPtrOutput) DeinterlaceAllFrames added in v0.24.0 

func (o BwdifConfigPtrOutput) DeinterlaceAllFrames() pulumi.BoolPtrOutput

Deinterlace all frames rather than just the frames identified as interlaced. The default is `false`.

func (BwdifConfigPtrOutput) Elem added in v0.24.0 

func (o BwdifConfigPtrOutput) Elem() BwdifConfigOutput

func (BwdifConfigPtrOutput) ElementType added in v0.24.0 

func (BwdifConfigPtrOutput) ElementType() reflect.Type

func (BwdifConfigPtrOutput) Mode added in v0.24.0 

func (o BwdifConfigPtrOutput) Mode() pulumi.StringPtrOutput

Specifies the deinterlacing mode to adopt. The default is `send_frame`. Supported values: - `send_frame`: Output one frame for each frame - `send_field`: Output one frame for each field

func (BwdifConfigPtrOutput) Parity added in v0.24.0 

func (o BwdifConfigPtrOutput) Parity() pulumi.StringPtrOutput

The picture field parity assumed for the input interlaced video. The default is `auto`. Supported values: - `tff`: Assume the top field is first - `bff`: Assume the bottom field is first - `auto`: Enable automatic detection of field parity

func (BwdifConfigPtrOutput) ToBwdifConfigPtrOutput added in v0.24.0 

func (o BwdifConfigPtrOutput) ToBwdifConfigPtrOutput() BwdifConfigPtrOutput

func (BwdifConfigPtrOutput) ToBwdifConfigPtrOutputWithContext added in v0.24.0 

func (o BwdifConfigPtrOutput) ToBwdifConfigPtrOutputWithContext(ctx context.Context) BwdifConfigPtrOutput

type BwdifConfigResponse added in v0.24.0 

type BwdifConfigResponse struct {
	// Deinterlace all frames rather than just the frames identified as interlaced. The default is `false`.
	DeinterlaceAllFrames bool `pulumi:"deinterlaceAllFrames"`
	// Specifies the deinterlacing mode to adopt. The default is `send_frame`. Supported values: - `send_frame`: Output one frame for each frame - `send_field`: Output one frame for each field
	Mode string `pulumi:"mode"`
	// The picture field parity assumed for the input interlaced video. The default is `auto`. Supported values: - `tff`: Assume the top field is first - `bff`: Assume the bottom field is first - `auto`: Enable automatic detection of field parity
	Parity string `pulumi:"parity"`
}

Bob Weaver Deinterlacing Filter Configuration.

type BwdifConfigResponseOutput added in v0.24.0 

type BwdifConfigResponseOutput struct{ *pulumi.OutputState }

Bob Weaver Deinterlacing Filter Configuration.

func (BwdifConfigResponseOutput) DeinterlaceAllFrames added in v0.24.0 

func (o BwdifConfigResponseOutput) DeinterlaceAllFrames() pulumi.BoolOutput

Deinterlace all frames rather than just the frames identified as interlaced. The default is `false`.

func (BwdifConfigResponseOutput) ElementType added in v0.24.0 

func (BwdifConfigResponseOutput) ElementType() reflect.Type

func (BwdifConfigResponseOutput) Mode added in v0.24.0 

func (o BwdifConfigResponseOutput) Mode() pulumi.StringOutput

Specifies the deinterlacing mode to adopt. The default is `send_frame`. Supported values: - `send_frame`: Output one frame for each frame - `send_field`: Output one frame for each field

func (BwdifConfigResponseOutput) Parity added in v0.24.0 

func (o BwdifConfigResponseOutput) Parity() pulumi.StringOutput

The picture field parity assumed for the input interlaced video. The default is `auto`. Supported values: - `tff`: Assume the top field is first - `bff`: Assume the bottom field is first - `auto`: Enable automatic detection of field parity

func (BwdifConfigResponseOutput) ToBwdifConfigResponseOutput added in v0.24.0 

func (o BwdifConfigResponseOutput) ToBwdifConfigResponseOutput() BwdifConfigResponseOutput

func (BwdifConfigResponseOutput) ToBwdifConfigResponseOutputWithContext added in v0.24.0 

func (o BwdifConfigResponseOutput) ToBwdifConfigResponseOutputWithContext(ctx context.Context) BwdifConfigResponseOutput

type Clearkey added in v0.32.0 

type Clearkey struct {
}

Clearkey configuration.

type ClearkeyArgs added in v0.32.0 

type ClearkeyArgs struct {
}

Clearkey configuration.

func (ClearkeyArgs) ElementType added in v0.32.0 

func (ClearkeyArgs) ElementType() reflect.Type

func (ClearkeyArgs) ToClearkeyOutput added in v0.32.0 

func (i ClearkeyArgs) ToClearkeyOutput() ClearkeyOutput

func (ClearkeyArgs) ToClearkeyOutputWithContext added in v0.32.0 

func (i ClearkeyArgs) ToClearkeyOutputWithContext(ctx context.Context) ClearkeyOutput

func (ClearkeyArgs) ToClearkeyPtrOutput added in v0.32.0 

func (i ClearkeyArgs) ToClearkeyPtrOutput() ClearkeyPtrOutput

func (ClearkeyArgs) ToClearkeyPtrOutputWithContext added in v0.32.0 

func (i ClearkeyArgs) ToClearkeyPtrOutputWithContext(ctx context.Context) ClearkeyPtrOutput

type ClearkeyInput added in v0.32.0 

type ClearkeyInput interface {
	pulumi.Input

	ToClearkeyOutput() ClearkeyOutput
	ToClearkeyOutputWithContext(context.Context) ClearkeyOutput
}

ClearkeyInput is an input type that accepts ClearkeyArgs and ClearkeyOutput values. You can construct a concrete instance of `ClearkeyInput` via: 

ClearkeyArgs{...}

type ClearkeyOutput added in v0.32.0 

type ClearkeyOutput struct{ *pulumi.OutputState }

Clearkey configuration.

func (ClearkeyOutput) ElementType added in v0.32.0 

func (ClearkeyOutput) ElementType() reflect.Type

func (ClearkeyOutput) ToClearkeyOutput added in v0.32.0 

func (o ClearkeyOutput) ToClearkeyOutput() ClearkeyOutput

func (ClearkeyOutput) ToClearkeyOutputWithContext added in v0.32.0 

func (o ClearkeyOutput) ToClearkeyOutputWithContext(ctx context.Context) ClearkeyOutput

func (ClearkeyOutput) ToClearkeyPtrOutput added in v0.32.0 

func (o ClearkeyOutput) ToClearkeyPtrOutput() ClearkeyPtrOutput

func (ClearkeyOutput) ToClearkeyPtrOutputWithContext added in v0.32.0 

func (o ClearkeyOutput) ToClearkeyPtrOutputWithContext(ctx context.Context) ClearkeyPtrOutput

type ClearkeyPtrInput added in v0.32.0 

type ClearkeyPtrInput interface {
	pulumi.Input

	ToClearkeyPtrOutput() ClearkeyPtrOutput
	ToClearkeyPtrOutputWithContext(context.Context) ClearkeyPtrOutput
}

ClearkeyPtrInput is an input type that accepts ClearkeyArgs, ClearkeyPtr and ClearkeyPtrOutput values. You can construct a concrete instance of `ClearkeyPtrInput` via: 

        ClearkeyArgs{...}

or:

        nil

func ClearkeyPtr added in v0.32.0 

func ClearkeyPtr(v *ClearkeyArgs) ClearkeyPtrInput

type ClearkeyPtrOutput added in v0.32.0 

type ClearkeyPtrOutput struct{ *pulumi.OutputState }

func (ClearkeyPtrOutput) Elem added in v0.32.0 

func (o ClearkeyPtrOutput) Elem() ClearkeyOutput

func (ClearkeyPtrOutput) ElementType added in v0.32.0 

func (ClearkeyPtrOutput) ElementType() reflect.Type

func (ClearkeyPtrOutput) ToClearkeyPtrOutput added in v0.32.0 

func (o ClearkeyPtrOutput) ToClearkeyPtrOutput() ClearkeyPtrOutput

func (ClearkeyPtrOutput) ToClearkeyPtrOutputWithContext added in v0.32.0 

func (o ClearkeyPtrOutput) ToClearkeyPtrOutputWithContext(ctx context.Context) ClearkeyPtrOutput

type ClearkeyResponse added in v0.32.0 

type ClearkeyResponse struct {
}

Clearkey configuration.

type ClearkeyResponseOutput added in v0.32.0 

type ClearkeyResponseOutput struct{ *pulumi.OutputState }

Clearkey configuration.

func (ClearkeyResponseOutput) ElementType added in v0.32.0 

func (ClearkeyResponseOutput) ElementType() reflect.Type

func (ClearkeyResponseOutput) ToClearkeyResponseOutput added in v0.32.0 

func (o ClearkeyResponseOutput) ToClearkeyResponseOutput() ClearkeyResponseOutput

func (ClearkeyResponseOutput) ToClearkeyResponseOutputWithContext added in v0.32.0 

func (o ClearkeyResponseOutput) ToClearkeyResponseOutputWithContext(ctx context.Context) ClearkeyResponseOutput

type Color 

type Color struct {
	// Control brightness of the video. Enter a value between -1 and 1, where -1 is minimum brightness and 1 is maximum brightness. 0 is no change. The default is 0.
	Brightness *float64 `pulumi:"brightness"`
	// Control black and white contrast of the video. Enter a value between -1 and 1, where -1 is minimum contrast and 1 is maximum contrast. 0 is no change. The default is 0.
	Contrast *float64 `pulumi:"contrast"`
	// Control color saturation of the video. Enter a value between -1 and 1, where -1 is fully desaturated and 1 is maximum saturation. 0 is no change. The default is 0.
	Saturation *float64 `pulumi:"saturation"`
}

Color preprocessing configuration. **Note:** This configuration is not supported.

type ColorArgs 

type ColorArgs struct {
	// Control brightness of the video. Enter a value between -1 and 1, where -1 is minimum brightness and 1 is maximum brightness. 0 is no change. The default is 0.
	Brightness pulumi.Float64PtrInput `pulumi:"brightness"`
	// Control black and white contrast of the video. Enter a value between -1 and 1, where -1 is minimum contrast and 1 is maximum contrast. 0 is no change. The default is 0.
	Contrast pulumi.Float64PtrInput `pulumi:"contrast"`
	// Control color saturation of the video. Enter a value between -1 and 1, where -1 is fully desaturated and 1 is maximum saturation. 0 is no change. The default is 0.
	Saturation pulumi.Float64PtrInput `pulumi:"saturation"`
}

Color preprocessing configuration. **Note:** This configuration is not supported.

func (ColorArgs) ElementType 

func (ColorArgs) ElementType() reflect.Type

func (ColorArgs) ToColorOutput 

func (i ColorArgs) ToColorOutput() ColorOutput

func (ColorArgs) ToColorOutputWithContext 

func (i ColorArgs) ToColorOutputWithContext(ctx context.Context) ColorOutput

func (ColorArgs) ToColorPtrOutput 

func (i ColorArgs) ToColorPtrOutput() ColorPtrOutput

func (ColorArgs) ToColorPtrOutputWithContext 

func (i ColorArgs) ToColorPtrOutputWithContext(ctx context.Context) ColorPtrOutput

type ColorInput 

type ColorInput interface {
	pulumi.Input

	ToColorOutput() ColorOutput
	ToColorOutputWithContext(context.Context) ColorOutput
}

ColorInput is an input type that accepts ColorArgs and ColorOutput values. You can construct a concrete instance of `ColorInput` via: 

ColorArgs{...}

type ColorOutput 

type ColorOutput struct{ *pulumi.OutputState }

Color preprocessing configuration. **Note:** This configuration is not supported.

func (ColorOutput) Brightness 

func (o ColorOutput) Brightness() pulumi.Float64PtrOutput

Control brightness of the video. Enter a value between -1 and 1, where -1 is minimum brightness and 1 is maximum brightness. 0 is no change. The default is 0.

func (ColorOutput) Contrast 

func (o ColorOutput) Contrast() pulumi.Float64PtrOutput

Control black and white contrast of the video. Enter a value between -1 and 1, where -1 is minimum contrast and 1 is maximum contrast. 0 is no change. The default is 0.

func (ColorOutput) ElementType 

func (ColorOutput) ElementType() reflect.Type

func (ColorOutput) Saturation 

func (o ColorOutput) Saturation() pulumi.Float64PtrOutput

Control color saturation of the video. Enter a value between -1 and 1, where -1 is fully desaturated and 1 is maximum saturation. 0 is no change. The default is 0.

func (ColorOutput) ToColorOutput 

func (o ColorOutput) ToColorOutput() ColorOutput

func (ColorOutput) ToColorOutputWithContext 

func (o ColorOutput) ToColorOutputWithContext(ctx context.Context) ColorOutput

func (ColorOutput) ToColorPtrOutput 

func (o ColorOutput) ToColorPtrOutput() ColorPtrOutput

func (ColorOutput) ToColorPtrOutputWithContext 

func (o ColorOutput) ToColorPtrOutputWithContext(ctx context.Context) ColorPtrOutput

type ColorPtrInput 

type ColorPtrInput interface {
	pulumi.Input

	ToColorPtrOutput() ColorPtrOutput
	ToColorPtrOutputWithContext(context.Context) ColorPtrOutput
}

ColorPtrInput is an input type that accepts ColorArgs, ColorPtr and ColorPtrOutput values. You can construct a concrete instance of `ColorPtrInput` via: 

        ColorArgs{...}

or:

        nil

func ColorPtr 

func ColorPtr(v *ColorArgs) ColorPtrInput

type ColorPtrOutput 

type ColorPtrOutput struct{ *pulumi.OutputState }

func (ColorPtrOutput) Brightness 

func (o ColorPtrOutput) Brightness() pulumi.Float64PtrOutput

Control brightness of the video. Enter a value between -1 and 1, where -1 is minimum brightness and 1 is maximum brightness. 0 is no change. The default is 0.

func (ColorPtrOutput) Contrast 

func (o ColorPtrOutput) Contrast() pulumi.Float64PtrOutput

Control black and white contrast of the video. Enter a value between -1 and 1, where -1 is minimum contrast and 1 is maximum contrast. 0 is no change. The default is 0.

func (ColorPtrOutput) Elem 

func (o ColorPtrOutput) Elem() ColorOutput

func (ColorPtrOutput) ElementType 

func (ColorPtrOutput) ElementType() reflect.Type

func (ColorPtrOutput) Saturation 

func (o ColorPtrOutput) Saturation() pulumi.Float64PtrOutput

Control color saturation of the video. Enter a value between -1 and 1, where -1 is fully desaturated and 1 is maximum saturation. 0 is no change. The default is 0.

func (ColorPtrOutput) ToColorPtrOutput 

func (o ColorPtrOutput) ToColorPtrOutput() ColorPtrOutput

func (ColorPtrOutput) ToColorPtrOutputWithContext 

func (o ColorPtrOutput) ToColorPtrOutputWithContext(ctx context.Context) ColorPtrOutput

type ColorResponse 

type ColorResponse struct {
	// Control brightness of the video. Enter a value between -1 and 1, where -1 is minimum brightness and 1 is maximum brightness. 0 is no change. The default is 0.
	Brightness float64 `pulumi:"brightness"`
	// Control black and white contrast of the video. Enter a value between -1 and 1, where -1 is minimum contrast and 1 is maximum contrast. 0 is no change. The default is 0.
	Contrast float64 `pulumi:"contrast"`
	// Control color saturation of the video. Enter a value between -1 and 1, where -1 is fully desaturated and 1 is maximum saturation. 0 is no change. The default is 0.
	Saturation float64 `pulumi:"saturation"`
}

Color preprocessing configuration. **Note:** This configuration is not supported.

type ColorResponseOutput 

type ColorResponseOutput struct{ *pulumi.OutputState }

Color preprocessing configuration. **Note:** This configuration is not supported.

func (ColorResponseOutput) Brightness 

func (o ColorResponseOutput) Brightness() pulumi.Float64Output

Control brightness of the video. Enter a value between -1 and 1, where -1 is minimum brightness and 1 is maximum brightness. 0 is no change. The default is 0.

func (ColorResponseOutput) Contrast 

func (o ColorResponseOutput) Contrast() pulumi.Float64Output

Control black and white contrast of the video. Enter a value between -1 and 1, where -1 is minimum contrast and 1 is maximum contrast. 0 is no change. The default is 0.

func (ColorResponseOutput) ElementType 

func (ColorResponseOutput) ElementType() reflect.Type

func (ColorResponseOutput) Saturation 

func (o ColorResponseOutput) Saturation() pulumi.Float64Output

Control color saturation of the video. Enter a value between -1 and 1, where -1 is fully desaturated and 1 is maximum saturation. 0 is no change. The default is 0.

func (ColorResponseOutput) ToColorResponseOutput 

func (o ColorResponseOutput) ToColorResponseOutput() ColorResponseOutput

func (ColorResponseOutput) ToColorResponseOutputWithContext 

func (o ColorResponseOutput) ToColorResponseOutputWithContext(ctx context.Context) ColorResponseOutput

type Crop 

type Crop struct {
	// The number of pixels to crop from the bottom. The default is 0.
	BottomPixels *int `pulumi:"bottomPixels"`
	// The number of pixels to crop from the left. The default is 0.
	LeftPixels *int `pulumi:"leftPixels"`
	// The number of pixels to crop from the right. The default is 0.
	RightPixels *int `pulumi:"rightPixels"`
	// The number of pixels to crop from the top. The default is 0.
	TopPixels *int `pulumi:"topPixels"`
}

Video cropping configuration for the input video. The cropped input video is scaled to match the output resolution.

type CropArgs 

type CropArgs struct {
	// The number of pixels to crop from the bottom. The default is 0.
	BottomPixels pulumi.IntPtrInput `pulumi:"bottomPixels"`
	// The number of pixels to crop from the left. The default is 0.
	LeftPixels pulumi.IntPtrInput `pulumi:"leftPixels"`
	// The number of pixels to crop from the right. The default is 0.
	RightPixels pulumi.IntPtrInput `pulumi:"rightPixels"`
	// The number of pixels to crop from the top. The default is 0.
	TopPixels pulumi.IntPtrInput `pulumi:"topPixels"`
}

Video cropping configuration for the input video. The cropped input video is scaled to match the output resolution.

func (CropArgs) ElementType 

func (CropArgs) ElementType() reflect.Type

func (CropArgs) ToCropOutput 

func (i CropArgs) ToCropOutput() CropOutput

func (CropArgs) ToCropOutputWithContext 

func (i CropArgs) ToCropOutputWithContext(ctx context.Context) CropOutput

func (CropArgs) ToCropPtrOutput 

func (i CropArgs) ToCropPtrOutput() CropPtrOutput

func (CropArgs) ToCropPtrOutputWithContext 

func (i CropArgs) ToCropPtrOutputWithContext(ctx context.Context) CropPtrOutput

type CropInput 

type CropInput interface {
	pulumi.Input

	ToCropOutput() CropOutput
	ToCropOutputWithContext(context.Context) CropOutput
}

CropInput is an input type that accepts CropArgs and CropOutput values. You can construct a concrete instance of `CropInput` via: 

CropArgs{...}

type CropOutput 

type CropOutput struct{ *pulumi.OutputState }

Video cropping configuration for the input video. The cropped input video is scaled to match the output resolution.

func (CropOutput) BottomPixels 

func (o CropOutput) BottomPixels() pulumi.IntPtrOutput

The number of pixels to crop from the bottom. The default is 0.

func (CropOutput) ElementType 

func (CropOutput) ElementType() reflect.Type

func (CropOutput) LeftPixels 

func (o CropOutput) LeftPixels() pulumi.IntPtrOutput

The number of pixels to crop from the left. The default is 0.

func (CropOutput) RightPixels 

func (o CropOutput) RightPixels() pulumi.IntPtrOutput

The number of pixels to crop from the right. The default is 0.

func (CropOutput) ToCropOutput 

func (o CropOutput) ToCropOutput() CropOutput

func (CropOutput) ToCropOutputWithContext 

func (o CropOutput) ToCropOutputWithContext(ctx context.Context) CropOutput

func (CropOutput) ToCropPtrOutput 

func (o CropOutput) ToCropPtrOutput() CropPtrOutput

func (CropOutput) ToCropPtrOutputWithContext 

func (o CropOutput) ToCropPtrOutputWithContext(ctx context.Context) CropPtrOutput

func (CropOutput) TopPixels 

func (o CropOutput) TopPixels() pulumi.IntPtrOutput

The number of pixels to crop from the top. The default is 0.

type CropPtrInput 

type CropPtrInput interface {
	pulumi.Input

	ToCropPtrOutput() CropPtrOutput
	ToCropPtrOutputWithContext(context.Context) CropPtrOutput
}

CropPtrInput is an input type that accepts CropArgs, CropPtr and CropPtrOutput values. You can construct a concrete instance of `CropPtrInput` via: 

        CropArgs{...}

or:

        nil

func CropPtr 

func CropPtr(v *CropArgs) CropPtrInput

type CropPtrOutput 

type CropPtrOutput struct{ *pulumi.OutputState }

func (CropPtrOutput) BottomPixels 

func (o CropPtrOutput) BottomPixels() pulumi.IntPtrOutput

The number of pixels to crop from the bottom. The default is 0.

func (CropPtrOutput) Elem 

func (o CropPtrOutput) Elem() CropOutput

func (CropPtrOutput) ElementType 

func (CropPtrOutput) ElementType() reflect.Type

func (CropPtrOutput) LeftPixels 

func (o CropPtrOutput) LeftPixels() pulumi.IntPtrOutput

The number of pixels to crop from the left. The default is 0.

func (CropPtrOutput) RightPixels 

func (o CropPtrOutput) RightPixels() pulumi.IntPtrOutput

The number of pixels to crop from the right. The default is 0.

func (CropPtrOutput) ToCropPtrOutput 

func (o CropPtrOutput) ToCropPtrOutput() CropPtrOutput

func (CropPtrOutput) ToCropPtrOutputWithContext 

func (o CropPtrOutput) ToCropPtrOutputWithContext(ctx context.Context) CropPtrOutput

func (CropPtrOutput) TopPixels 

func (o CropPtrOutput) TopPixels() pulumi.IntPtrOutput

The number of pixels to crop from the top. The default is 0.

type CropResponse 

type CropResponse struct {
	// The number of pixels to crop from the bottom. The default is 0.
	BottomPixels int `pulumi:"bottomPixels"`
	// The number of pixels to crop from the left. The default is 0.
	LeftPixels int `pulumi:"leftPixels"`
	// The number of pixels to crop from the right. The default is 0.
	RightPixels int `pulumi:"rightPixels"`
	// The number of pixels to crop from the top. The default is 0.
	TopPixels int `pulumi:"topPixels"`
}

Video cropping configuration for the input video. The cropped input video is scaled to match the output resolution.

type CropResponseOutput 

type CropResponseOutput struct{ *pulumi.OutputState }

Video cropping configuration for the input video. The cropped input video is scaled to match the output resolution.

func (CropResponseOutput) BottomPixels 

func (o CropResponseOutput) BottomPixels() pulumi.IntOutput

The number of pixels to crop from the bottom. The default is 0.

func (CropResponseOutput) ElementType 

func (CropResponseOutput) ElementType() reflect.Type

func (CropResponseOutput) LeftPixels 

func (o CropResponseOutput) LeftPixels() pulumi.IntOutput

The number of pixels to crop from the left. The default is 0.

func (CropResponseOutput) RightPixels 

func (o CropResponseOutput) RightPixels() pulumi.IntOutput

The number of pixels to crop from the right. The default is 0.

func (CropResponseOutput) ToCropResponseOutput 

func (o CropResponseOutput) ToCropResponseOutput() CropResponseOutput

func (CropResponseOutput) ToCropResponseOutputWithContext 

func (o CropResponseOutput) ToCropResponseOutputWithContext(ctx context.Context) CropResponseOutput

func (CropResponseOutput) TopPixels 

func (o CropResponseOutput) TopPixels() pulumi.IntOutput

The number of pixels to crop from the top. The default is 0.

type DashConfig added in v0.32.0 

type DashConfig struct {
	// The segment reference scheme for a `DASH` manifest. The default is `SEGMENT_LIST`.
	SegmentReferenceScheme *DashConfigSegmentReferenceScheme `pulumi:"segmentReferenceScheme"`
}

`DASH` manifest configuration.

type DashConfigArgs added in v0.32.0 

type DashConfigArgs struct {
	// The segment reference scheme for a `DASH` manifest. The default is `SEGMENT_LIST`.
	SegmentReferenceScheme DashConfigSegmentReferenceSchemePtrInput `pulumi:"segmentReferenceScheme"`
}

`DASH` manifest configuration.

func (DashConfigArgs) ElementType added in v0.32.0 

func (DashConfigArgs) ElementType() reflect.Type

func (DashConfigArgs) ToDashConfigOutput added in v0.32.0 

func (i DashConfigArgs) ToDashConfigOutput() DashConfigOutput

func (DashConfigArgs) ToDashConfigOutputWithContext added in v0.32.0 

func (i DashConfigArgs) ToDashConfigOutputWithContext(ctx context.Context) DashConfigOutput

func (DashConfigArgs) ToDashConfigPtrOutput added in v0.32.0 

func (i DashConfigArgs) ToDashConfigPtrOutput() DashConfigPtrOutput

func (DashConfigArgs) ToDashConfigPtrOutputWithContext added in v0.32.0 

func (i DashConfigArgs) ToDashConfigPtrOutputWithContext(ctx context.Context) DashConfigPtrOutput

type DashConfigInput added in v0.32.0 

type DashConfigInput interface {
	pulumi.Input

	ToDashConfigOutput() DashConfigOutput
	ToDashConfigOutputWithContext(context.Context) DashConfigOutput
}

DashConfigInput is an input type that accepts DashConfigArgs and DashConfigOutput values. You can construct a concrete instance of `DashConfigInput` via: 

DashConfigArgs{...}

type DashConfigOutput added in v0.32.0 

type DashConfigOutput struct{ *pulumi.OutputState }

`DASH` manifest configuration.

func (DashConfigOutput) ElementType added in v0.32.0 

func (DashConfigOutput) ElementType() reflect.Type

func (DashConfigOutput) SegmentReferenceScheme added in v0.32.0 

func (o DashConfigOutput) SegmentReferenceScheme() DashConfigSegmentReferenceSchemePtrOutput

The segment reference scheme for a `DASH` manifest. The default is `SEGMENT_LIST`.

func (DashConfigOutput) ToDashConfigOutput added in v0.32.0 

func (o DashConfigOutput) ToDashConfigOutput() DashConfigOutput

func (DashConfigOutput) ToDashConfigOutputWithContext added in v0.32.0 

func (o DashConfigOutput) ToDashConfigOutputWithContext(ctx context.Context) DashConfigOutput

func (DashConfigOutput) ToDashConfigPtrOutput added in v0.32.0 

func (o DashConfigOutput) ToDashConfigPtrOutput() DashConfigPtrOutput

func (DashConfigOutput) ToDashConfigPtrOutputWithContext added in v0.32.0 

func (o DashConfigOutput) ToDashConfigPtrOutputWithContext(ctx context.Context) DashConfigPtrOutput

type DashConfigPtrInput added in v0.32.0 

type DashConfigPtrInput interface {
	pulumi.Input

	ToDashConfigPtrOutput() DashConfigPtrOutput
	ToDashConfigPtrOutputWithContext(context.Context) DashConfigPtrOutput
}

DashConfigPtrInput is an input type that accepts DashConfigArgs, DashConfigPtr and DashConfigPtrOutput values. You can construct a concrete instance of `DashConfigPtrInput` via: 

        DashConfigArgs{...}

or:

        nil

func DashConfigPtr added in v0.32.0 

func DashConfigPtr(v *DashConfigArgs) DashConfigPtrInput

type DashConfigPtrOutput added in v0.32.0 

type DashConfigPtrOutput struct{ *pulumi.OutputState }

func (DashConfigPtrOutput) Elem added in v0.32.0 

func (o DashConfigPtrOutput) Elem() DashConfigOutput

func (DashConfigPtrOutput) ElementType added in v0.32.0 

func (DashConfigPtrOutput) ElementType() reflect.Type

func (DashConfigPtrOutput) SegmentReferenceScheme added in v0.32.0 

func (o DashConfigPtrOutput) SegmentReferenceScheme() DashConfigSegmentReferenceSchemePtrOutput

The segment reference scheme for a `DASH` manifest. The default is `SEGMENT_LIST`.

func (DashConfigPtrOutput) ToDashConfigPtrOutput added in v0.32.0 

func (o DashConfigPtrOutput) ToDashConfigPtrOutput() DashConfigPtrOutput

func (DashConfigPtrOutput) ToDashConfigPtrOutputWithContext added in v0.32.0 

func (o DashConfigPtrOutput) ToDashConfigPtrOutputWithContext(ctx context.Context) DashConfigPtrOutput

type DashConfigResponse added in v0.32.0 

type DashConfigResponse struct {
	// The segment reference scheme for a `DASH` manifest. The default is `SEGMENT_LIST`.
	SegmentReferenceScheme string `pulumi:"segmentReferenceScheme"`
}

`DASH` manifest configuration.

type DashConfigResponseOutput added in v0.32.0 

type DashConfigResponseOutput struct{ *pulumi.OutputState }

`DASH` manifest configuration.

func (DashConfigResponseOutput) ElementType added in v0.32.0 

func (DashConfigResponseOutput) ElementType() reflect.Type

func (DashConfigResponseOutput) SegmentReferenceScheme added in v0.32.0 

func (o DashConfigResponseOutput) SegmentReferenceScheme() pulumi.StringOutput

The segment reference scheme for a `DASH` manifest. The default is `SEGMENT_LIST`.

func (DashConfigResponseOutput) ToDashConfigResponseOutput added in v0.32.0 

func (o DashConfigResponseOutput) ToDashConfigResponseOutput() DashConfigResponseOutput

func (DashConfigResponseOutput) ToDashConfigResponseOutputWithContext added in v0.32.0 

func (o DashConfigResponseOutput) ToDashConfigResponseOutputWithContext(ctx context.Context) DashConfigResponseOutput

type DashConfigSegmentReferenceScheme added in v0.32.0 

type DashConfigSegmentReferenceScheme string

The segment reference scheme for a `DASH` manifest. The default is `SEGMENT_LIST`.

func (DashConfigSegmentReferenceScheme) ElementType added in v0.32.0 

func (DashConfigSegmentReferenceScheme) ElementType() reflect.Type

func (DashConfigSegmentReferenceScheme) ToDashConfigSegmentReferenceSchemeOutput added in v0.32.0 

func (e DashConfigSegmentReferenceScheme) ToDashConfigSegmentReferenceSchemeOutput() DashConfigSegmentReferenceSchemeOutput

func (DashConfigSegmentReferenceScheme) ToDashConfigSegmentReferenceSchemeOutputWithContext added in v0.32.0 

func (e DashConfigSegmentReferenceScheme) ToDashConfigSegmentReferenceSchemeOutputWithContext(ctx context.Context) DashConfigSegmentReferenceSchemeOutput

func (DashConfigSegmentReferenceScheme) ToDashConfigSegmentReferenceSchemePtrOutput added in v0.32.0 

func (e DashConfigSegmentReferenceScheme) ToDashConfigSegmentReferenceSchemePtrOutput() DashConfigSegmentReferenceSchemePtrOutput

func (DashConfigSegmentReferenceScheme) ToDashConfigSegmentReferenceSchemePtrOutputWithContext added in v0.32.0 

func (e DashConfigSegmentReferenceScheme) ToDashConfigSegmentReferenceSchemePtrOutputWithContext(ctx context.Context) DashConfigSegmentReferenceSchemePtrOutput

func (DashConfigSegmentReferenceScheme) ToStringOutput added in v0.32.0 

func (e DashConfigSegmentReferenceScheme) ToStringOutput() pulumi.StringOutput

func (DashConfigSegmentReferenceScheme) ToStringOutputWithContext added in v0.32.0 

func (e DashConfigSegmentReferenceScheme) ToStringOutputWithContext(ctx context.Context) pulumi.StringOutput

func (DashConfigSegmentReferenceScheme) ToStringPtrOutput added in v0.32.0 

func (e DashConfigSegmentReferenceScheme) ToStringPtrOutput() pulumi.StringPtrOutput

func (DashConfigSegmentReferenceScheme) ToStringPtrOutputWithContext added in v0.32.0 

func (e DashConfigSegmentReferenceScheme) ToStringPtrOutputWithContext(ctx context.Context) pulumi.StringPtrOutput

type DashConfigSegmentReferenceSchemeInput added in v0.32.0 

type DashConfigSegmentReferenceSchemeInput interface {
	pulumi.Input

	ToDashConfigSegmentReferenceSchemeOutput() DashConfigSegmentReferenceSchemeOutput
	ToDashConfigSegmentReferenceSchemeOutputWithContext(context.Context) DashConfigSegmentReferenceSchemeOutput
}

DashConfigSegmentReferenceSchemeInput is an input type that accepts values of the DashConfigSegmentReferenceScheme enum A concrete instance of `DashConfigSegmentReferenceSchemeInput` can be one of the following: 

DashConfigSegmentReferenceSchemeSegmentReferenceSchemeUnspecified
DashConfigSegmentReferenceSchemeSegmentList
DashConfigSegmentReferenceSchemeSegmentTemplateNumber

type DashConfigSegmentReferenceSchemeOutput added in v0.32.0 

type DashConfigSegmentReferenceSchemeOutput struct{ *pulumi.OutputState }

func (DashConfigSegmentReferenceSchemeOutput) ElementType added in v0.32.0 

func (DashConfigSegmentReferenceSchemeOutput) ElementType() reflect.Type

func (DashConfigSegmentReferenceSchemeOutput) ToDashConfigSegmentReferenceSchemeOutput added in v0.32.0 

func (o DashConfigSegmentReferenceSchemeOutput) ToDashConfigSegmentReferenceSchemeOutput() DashConfigSegmentReferenceSchemeOutput

func (DashConfigSegmentReferenceSchemeOutput) ToDashConfigSegmentReferenceSchemeOutputWithContext added in v0.32.0 

func (o DashConfigSegmentReferenceSchemeOutput) ToDashConfigSegmentReferenceSchemeOutputWithContext(ctx context.Context) DashConfigSegmentReferenceSchemeOutput

func (DashConfigSegmentReferenceSchemeOutput) ToDashConfigSegmentReferenceSchemePtrOutput added in v0.32.0 

func (o DashConfigSegmentReferenceSchemeOutput) ToDashConfigSegmentReferenceSchemePtrOutput() DashConfigSegmentReferenceSchemePtrOutput

func (DashConfigSegmentReferenceSchemeOutput) ToDashConfigSegmentReferenceSchemePtrOutputWithContext added in v0.32.0 

func (o DashConfigSegmentReferenceSchemeOutput) ToDashConfigSegmentReferenceSchemePtrOutputWithContext(ctx context.Context) DashConfigSegmentReferenceSchemePtrOutput

func (DashConfigSegmentReferenceSchemeOutput) ToStringOutput added in v0.32.0 

func (o DashConfigSegmentReferenceSchemeOutput) ToStringOutput() pulumi.StringOutput

func (DashConfigSegmentReferenceSchemeOutput) ToStringOutputWithContext added in v0.32.0 

func (o DashConfigSegmentReferenceSchemeOutput) ToStringOutputWithContext(ctx context.Context) pulumi.StringOutput

func (DashConfigSegmentReferenceSchemeOutput) ToStringPtrOutput added in v0.32.0 

func (o DashConfigSegmentReferenceSchemeOutput) ToStringPtrOutput() pulumi.StringPtrOutput

func (DashConfigSegmentReferenceSchemeOutput) ToStringPtrOutputWithContext added in v0.32.0 

func (o DashConfigSegmentReferenceSchemeOutput) ToStringPtrOutputWithContext(ctx context.Context) pulumi.StringPtrOutput

type DashConfigSegmentReferenceSchemePtrInput added in v0.32.0 

type DashConfigSegmentReferenceSchemePtrInput interface {
	pulumi.Input

	ToDashConfigSegmentReferenceSchemePtrOutput() DashConfigSegmentReferenceSchemePtrOutput
	ToDashConfigSegmentReferenceSchemePtrOutputWithContext(context.Context) DashConfigSegmentReferenceSchemePtrOutput
}

func DashConfigSegmentReferenceSchemePtr added in v0.32.0 

func DashConfigSegmentReferenceSchemePtr(v string) DashConfigSegmentReferenceSchemePtrInput

type DashConfigSegmentReferenceSchemePtrOutput added in v0.32.0 

type DashConfigSegmentReferenceSchemePtrOutput struct{ *pulumi.OutputState }

func (DashConfigSegmentReferenceSchemePtrOutput) Elem added in v0.32.0 

func (o DashConfigSegmentReferenceSchemePtrOutput) Elem() DashConfigSegmentReferenceSchemeOutput

func (DashConfigSegmentReferenceSchemePtrOutput) ElementType added in v0.32.0 

func (DashConfigSegmentReferenceSchemePtrOutput) ElementType() reflect.Type

func (DashConfigSegmentReferenceSchemePtrOutput) ToDashConfigSegmentReferenceSchemePtrOutput added in v0.32.0 

func (o DashConfigSegmentReferenceSchemePtrOutput) ToDashConfigSegmentReferenceSchemePtrOutput() DashConfigSegmentReferenceSchemePtrOutput

func (DashConfigSegmentReferenceSchemePtrOutput) ToDashConfigSegmentReferenceSchemePtrOutputWithContext added in v0.32.0 

func (o DashConfigSegmentReferenceSchemePtrOutput) ToDashConfigSegmentReferenceSchemePtrOutputWithContext(ctx context.Context) DashConfigSegmentReferenceSchemePtrOutput

func (DashConfigSegmentReferenceSchemePtrOutput) ToStringPtrOutput added in v0.32.0 

func (o DashConfigSegmentReferenceSchemePtrOutput) ToStringPtrOutput() pulumi.StringPtrOutput

func (DashConfigSegmentReferenceSchemePtrOutput) ToStringPtrOutputWithContext added in v0.32.0 

func (o DashConfigSegmentReferenceSchemePtrOutput) ToStringPtrOutputWithContext(ctx context.Context) pulumi.StringPtrOutput

type Deblock 

type Deblock struct {
	// Enable deblocker. The default is `false`.
	Enabled *bool `pulumi:"enabled"`
	// Set strength of the deblocker. Enter a value between 0 and 1. The higher the value, the stronger the block removal. 0 is no deblocking. The default is 0.
	Strength *float64 `pulumi:"strength"`
}

Deblock preprocessing configuration. **Note:** This configuration is not supported.

type DeblockArgs 

type DeblockArgs struct {
	// Enable deblocker. The default is `false`.
	Enabled pulumi.BoolPtrInput `pulumi:"enabled"`
	// Set strength of the deblocker. Enter a value between 0 and 1. The higher the value, the stronger the block removal. 0 is no deblocking. The default is 0.
	Strength pulumi.Float64PtrInput `pulumi:"strength"`
}

Deblock preprocessing configuration. **Note:** This configuration is not supported.

func (DeblockArgs) ElementType 

func (DeblockArgs) ElementType() reflect.Type

func (DeblockArgs) ToDeblockOutput 

func (i DeblockArgs) ToDeblockOutput() DeblockOutput

func (DeblockArgs) ToDeblockOutputWithContext 

func (i DeblockArgs) ToDeblockOutputWithContext(ctx context.Context) DeblockOutput

func (DeblockArgs) ToDeblockPtrOutput 

func (i DeblockArgs) ToDeblockPtrOutput() DeblockPtrOutput

func (DeblockArgs) ToDeblockPtrOutputWithContext 

func (i DeblockArgs) ToDeblockPtrOutputWithContext(ctx context.Context) DeblockPtrOutput

type DeblockInput 

type DeblockInput interface {
	pulumi.Input

	ToDeblockOutput() DeblockOutput
	ToDeblockOutputWithContext(context.Context) DeblockOutput
}

DeblockInput is an input type that accepts DeblockArgs and DeblockOutput values. You can construct a concrete instance of `DeblockInput` via: 

DeblockArgs{...}

type DeblockOutput 

type DeblockOutput struct{ *pulumi.OutputState }

Deblock preprocessing configuration. **Note:** This configuration is not supported.

func (DeblockOutput) ElementType 

func (DeblockOutput) ElementType() reflect.Type

func (DeblockOutput) Enabled 

func (o DeblockOutput) Enabled() pulumi.BoolPtrOutput

Enable deblocker. The default is `false`.

func (DeblockOutput) Strength 

func (o DeblockOutput) Strength() pulumi.Float64PtrOutput

Set strength of the deblocker. Enter a value between 0 and 1. The higher the value, the stronger the block removal. 0 is no deblocking. The default is 0.

func (DeblockOutput) ToDeblockOutput 

func (o DeblockOutput) ToDeblockOutput() DeblockOutput

func (DeblockOutput) ToDeblockOutputWithContext 

func (o DeblockOutput) ToDeblockOutputWithContext(ctx context.Context) DeblockOutput

func (DeblockOutput) ToDeblockPtrOutput 

func (o DeblockOutput) ToDeblockPtrOutput() DeblockPtrOutput

func (DeblockOutput) ToDeblockPtrOutputWithContext 

func (o DeblockOutput) ToDeblockPtrOutputWithContext(ctx context.Context) DeblockPtrOutput

type DeblockPtrInput 

type DeblockPtrInput interface {
	pulumi.Input

	ToDeblockPtrOutput() DeblockPtrOutput
	ToDeblockPtrOutputWithContext(context.Context) DeblockPtrOutput
}

DeblockPtrInput is an input type that accepts DeblockArgs, DeblockPtr and DeblockPtrOutput values. You can construct a concrete instance of `DeblockPtrInput` via: 

        DeblockArgs{...}

or:

        nil

func DeblockPtr 

func DeblockPtr(v *DeblockArgs) DeblockPtrInput

type DeblockPtrOutput 

type DeblockPtrOutput struct{ *pulumi.OutputState }

func (DeblockPtrOutput) Elem 

func (o DeblockPtrOutput) Elem() DeblockOutput

func (DeblockPtrOutput) ElementType 

func (DeblockPtrOutput) ElementType() reflect.Type

func (DeblockPtrOutput) Enabled 

func (o DeblockPtrOutput) Enabled() pulumi.BoolPtrOutput

Enable deblocker. The default is `false`.

func (DeblockPtrOutput) Strength 

func (o DeblockPtrOutput) Strength() pulumi.Float64PtrOutput

Set strength of the deblocker. Enter a value between 0 and 1. The higher the value, the stronger the block removal. 0 is no deblocking. The default is 0.

func (DeblockPtrOutput) ToDeblockPtrOutput 

func (o DeblockPtrOutput) ToDeblockPtrOutput() DeblockPtrOutput

func (DeblockPtrOutput) ToDeblockPtrOutputWithContext 

func (o DeblockPtrOutput) ToDeblockPtrOutputWithContext(ctx context.Context) DeblockPtrOutput

type DeblockResponse 

type DeblockResponse struct {
	// Enable deblocker. The default is `false`.
	Enabled bool `pulumi:"enabled"`
	// Set strength of the deblocker. Enter a value between 0 and 1. The higher the value, the stronger the block removal. 0 is no deblocking. The default is 0.
	Strength float64 `pulumi:"strength"`
}

Deblock preprocessing configuration. **Note:** This configuration is not supported.

type DeblockResponseOutput 

type DeblockResponseOutput struct{ *pulumi.OutputState }

Deblock preprocessing configuration. **Note:** This configuration is not supported.

func (DeblockResponseOutput) ElementType 

func (DeblockResponseOutput) ElementType() reflect.Type

func (DeblockResponseOutput) Enabled 

func (o DeblockResponseOutput) Enabled() pulumi.BoolOutput

Enable deblocker. The default is `false`.

func (DeblockResponseOutput) Strength 

func (o DeblockResponseOutput) Strength() pulumi.Float64Output

Set strength of the deblocker. Enter a value between 0 and 1. The higher the value, the stronger the block removal. 0 is no deblocking. The default is 0.

func (DeblockResponseOutput) ToDeblockResponseOutput 

func (o DeblockResponseOutput) ToDeblockResponseOutput() DeblockResponseOutput

func (DeblockResponseOutput) ToDeblockResponseOutputWithContext 

func (o DeblockResponseOutput) ToDeblockResponseOutputWithContext(ctx context.Context) DeblockResponseOutput

type Deinterlace added in v0.24.0 

type Deinterlace struct {
	// Specifies the Bob Weaver Deinterlacing Filter Configuration.
	Bwdif *BwdifConfig `pulumi:"bwdif"`
	// Specifies the Yet Another Deinterlacing Filter Configuration.
	Yadif *YadifConfig `pulumi:"yadif"`
}

Deinterlace configuration for input video.

type DeinterlaceArgs added in v0.24.0 

type DeinterlaceArgs struct {
	// Specifies the Bob Weaver Deinterlacing Filter Configuration.
	Bwdif BwdifConfigPtrInput `pulumi:"bwdif"`
	// Specifies the Yet Another Deinterlacing Filter Configuration.
	Yadif YadifConfigPtrInput `pulumi:"yadif"`
}

Deinterlace configuration for input video.

func (DeinterlaceArgs) ElementType added in v0.24.0 

func (DeinterlaceArgs) ElementType() reflect.Type

func (DeinterlaceArgs) ToDeinterlaceOutput added in v0.24.0 

func (i DeinterlaceArgs) ToDeinterlaceOutput() DeinterlaceOutput

func (DeinterlaceArgs) ToDeinterlaceOutputWithContext added in v0.24.0 

func (i DeinterlaceArgs) ToDeinterlaceOutputWithContext(ctx context.Context) DeinterlaceOutput

func (DeinterlaceArgs) ToDeinterlacePtrOutput added in v0.24.0 

func (i DeinterlaceArgs) ToDeinterlacePtrOutput() DeinterlacePtrOutput

func (DeinterlaceArgs) ToDeinterlacePtrOutputWithContext added in v0.24.0 

func (i DeinterlaceArgs) ToDeinterlacePtrOutputWithContext(ctx context.Context) DeinterlacePtrOutput

type DeinterlaceInput added in v0.24.0 

type DeinterlaceInput interface {
	pulumi.Input

	ToDeinterlaceOutput() DeinterlaceOutput
	ToDeinterlaceOutputWithContext(context.Context) DeinterlaceOutput
}

DeinterlaceInput is an input type that accepts DeinterlaceArgs and DeinterlaceOutput values. You can construct a concrete instance of `DeinterlaceInput` via: 

DeinterlaceArgs{...}

type DeinterlaceOutput added in v0.24.0 

type DeinterlaceOutput struct{ *pulumi.OutputState }

Deinterlace configuration for input video.

func (DeinterlaceOutput) Bwdif added in v0.24.0 

func (o DeinterlaceOutput) Bwdif() BwdifConfigPtrOutput

Specifies the Bob Weaver Deinterlacing Filter Configuration.

func (DeinterlaceOutput) ElementType added in v0.24.0 

func (DeinterlaceOutput) ElementType() reflect.Type

func (DeinterlaceOutput) ToDeinterlaceOutput added in v0.24.0 

func (o DeinterlaceOutput) ToDeinterlaceOutput() DeinterlaceOutput

func (DeinterlaceOutput) ToDeinterlaceOutputWithContext added in v0.24.0 

func (o DeinterlaceOutput) ToDeinterlaceOutputWithContext(ctx context.Context) DeinterlaceOutput

func (DeinterlaceOutput) ToDeinterlacePtrOutput added in v0.24.0 

func (o DeinterlaceOutput) ToDeinterlacePtrOutput() DeinterlacePtrOutput

func (DeinterlaceOutput) ToDeinterlacePtrOutputWithContext added in v0.24.0 

func (o DeinterlaceOutput) ToDeinterlacePtrOutputWithContext(ctx context.Context) DeinterlacePtrOutput

func (DeinterlaceOutput) Yadif added in v0.24.0 

func (o DeinterlaceOutput) Yadif() YadifConfigPtrOutput

Specifies the Yet Another Deinterlacing Filter Configuration.

type DeinterlacePtrInput added in v0.24.0 

type DeinterlacePtrInput interface {
	pulumi.Input

	ToDeinterlacePtrOutput() DeinterlacePtrOutput
	ToDeinterlacePtrOutputWithContext(context.Context) DeinterlacePtrOutput
}

DeinterlacePtrInput is an input type that accepts DeinterlaceArgs, DeinterlacePtr and DeinterlacePtrOutput values. You can construct a concrete instance of `DeinterlacePtrInput` via: 

        DeinterlaceArgs{...}

or:

        nil

func DeinterlacePtr added in v0.24.0 

func DeinterlacePtr(v *DeinterlaceArgs) DeinterlacePtrInput

type DeinterlacePtrOutput added in v0.24.0 

type DeinterlacePtrOutput struct{ *pulumi.OutputState }

func (DeinterlacePtrOutput) Bwdif added in v0.24.0 

func (o DeinterlacePtrOutput) Bwdif() BwdifConfigPtrOutput

Specifies the Bob Weaver Deinterlacing Filter Configuration.

func (DeinterlacePtrOutput) Elem added in v0.24.0 

func (o DeinterlacePtrOutput) Elem() DeinterlaceOutput

func (DeinterlacePtrOutput) ElementType added in v0.24.0 

func (DeinterlacePtrOutput) ElementType() reflect.Type

func (DeinterlacePtrOutput) ToDeinterlacePtrOutput added in v0.24.0 

func (o DeinterlacePtrOutput) ToDeinterlacePtrOutput() DeinterlacePtrOutput

func (DeinterlacePtrOutput) ToDeinterlacePtrOutputWithContext added in v0.24.0 

func (o DeinterlacePtrOutput) ToDeinterlacePtrOutputWithContext(ctx context.Context) DeinterlacePtrOutput

func (DeinterlacePtrOutput) Yadif added in v0.24.0 

func (o DeinterlacePtrOutput) Yadif() YadifConfigPtrOutput

Specifies the Yet Another Deinterlacing Filter Configuration.

type DeinterlaceResponse added in v0.24.0 

type DeinterlaceResponse struct {
	// Specifies the Bob Weaver Deinterlacing Filter Configuration.
	Bwdif BwdifConfigResponse `pulumi:"bwdif"`
	// Specifies the Yet Another Deinterlacing Filter Configuration.
	Yadif YadifConfigResponse `pulumi:"yadif"`
}

Deinterlace configuration for input video.

type DeinterlaceResponseOutput added in v0.24.0 

type DeinterlaceResponseOutput struct{ *pulumi.OutputState }

Deinterlace configuration for input video.

func (DeinterlaceResponseOutput) Bwdif added in v0.24.0 

func (o DeinterlaceResponseOutput) Bwdif() BwdifConfigResponseOutput

Specifies the Bob Weaver Deinterlacing Filter Configuration.

func (DeinterlaceResponseOutput) ElementType added in v0.24.0 

func (DeinterlaceResponseOutput) ElementType() reflect.Type

func (DeinterlaceResponseOutput) ToDeinterlaceResponseOutput added in v0.24.0 

func (o DeinterlaceResponseOutput) ToDeinterlaceResponseOutput() DeinterlaceResponseOutput

func (DeinterlaceResponseOutput) ToDeinterlaceResponseOutputWithContext added in v0.24.0 

func (o DeinterlaceResponseOutput) ToDeinterlaceResponseOutputWithContext(ctx context.Context) DeinterlaceResponseOutput

func (DeinterlaceResponseOutput) Yadif added in v0.24.0 

func (o DeinterlaceResponseOutput) Yadif() YadifConfigResponseOutput

Specifies the Yet Another Deinterlacing Filter Configuration.

type Denoise 

type Denoise struct {
	// Set strength of the denoise. Enter a value between 0 and 1. The higher the value, the smoother the image. 0 is no denoising. The default is 0.
	Strength *float64 `pulumi:"strength"`
	// Set the denoiser mode. The default is `standard`. Supported denoiser modes: - `standard` - `grain`
	Tune *string `pulumi:"tune"`
}

Denoise preprocessing configuration. **Note:** This configuration is not supported.

type DenoiseArgs 

type DenoiseArgs struct {
	// Set strength of the denoise. Enter a value between 0 and 1. The higher the value, the smoother the image. 0 is no denoising. The default is 0.
	Strength pulumi.Float64PtrInput `pulumi:"strength"`
	// Set the denoiser mode. The default is `standard`. Supported denoiser modes: - `standard` - `grain`
	Tune pulumi.StringPtrInput `pulumi:"tune"`
}

Denoise preprocessing configuration. **Note:** This configuration is not supported.

func (DenoiseArgs) ElementType 

func (DenoiseArgs) ElementType() reflect.Type

func (DenoiseArgs) ToDenoiseOutput 

func (i DenoiseArgs) ToDenoiseOutput() DenoiseOutput

func (DenoiseArgs) ToDenoiseOutputWithContext 

func (i DenoiseArgs) ToDenoiseOutputWithContext(ctx context.Context) DenoiseOutput

func (DenoiseArgs) ToDenoisePtrOutput 

func (i DenoiseArgs) ToDenoisePtrOutput() DenoisePtrOutput

func (DenoiseArgs) ToDenoisePtrOutputWithContext 

func (i DenoiseArgs) ToDenoisePtrOutputWithContext(ctx context.Context) DenoisePtrOutput

type DenoiseInput 

type DenoiseInput interface {
	pulumi.Input

	ToDenoiseOutput() DenoiseOutput
	ToDenoiseOutputWithContext(context.Context) DenoiseOutput
}

DenoiseInput is an input type that accepts DenoiseArgs and DenoiseOutput values. You can construct a concrete instance of `DenoiseInput` via: 

DenoiseArgs{...}

type DenoiseOutput 

type DenoiseOutput struct{ *pulumi.OutputState }

Denoise preprocessing configuration. **Note:** This configuration is not supported.

func (DenoiseOutput) ElementType 

func (DenoiseOutput) ElementType() reflect.Type

func (DenoiseOutput) Strength 

func (o DenoiseOutput) Strength() pulumi.Float64PtrOutput

Set strength of the denoise. Enter a value between 0 and 1. The higher the value, the smoother the image. 0 is no denoising. The default is 0.

func (DenoiseOutput) ToDenoiseOutput 

func (o DenoiseOutput) ToDenoiseOutput() DenoiseOutput

func (DenoiseOutput) ToDenoiseOutputWithContext 

func (o DenoiseOutput) ToDenoiseOutputWithContext(ctx context.Context) DenoiseOutput

func (DenoiseOutput) ToDenoisePtrOutput 

func (o DenoiseOutput) ToDenoisePtrOutput() DenoisePtrOutput

func (DenoiseOutput) ToDenoisePtrOutputWithContext 

func (o DenoiseOutput) ToDenoisePtrOutputWithContext(ctx context.Context) DenoisePtrOutput

func (DenoiseOutput) Tune 

func (o DenoiseOutput) Tune() pulumi.StringPtrOutput

Set the denoiser mode. The default is `standard`. Supported denoiser modes: - `standard` - `grain`

type DenoisePtrInput 

type DenoisePtrInput interface {
	pulumi.Input

	ToDenoisePtrOutput() DenoisePtrOutput
	ToDenoisePtrOutputWithContext(context.Context) DenoisePtrOutput
}

DenoisePtrInput is an input type that accepts DenoiseArgs, DenoisePtr and DenoisePtrOutput values. You can construct a concrete instance of `DenoisePtrInput` via: 

        DenoiseArgs{...}

or:

        nil

func DenoisePtr 

func DenoisePtr(v *DenoiseArgs) DenoisePtrInput

type DenoisePtrOutput 

type DenoisePtrOutput struct{ *pulumi.OutputState }

func (DenoisePtrOutput) Elem 

func (o DenoisePtrOutput) Elem() DenoiseOutput

func (DenoisePtrOutput) ElementType 

func (DenoisePtrOutput) ElementType() reflect.Type

func (DenoisePtrOutput) Strength 

func (o DenoisePtrOutput) Strength() pulumi.Float64PtrOutput

Set strength of the denoise. Enter a value between 0 and 1. The higher the value, the smoother the image. 0 is no denoising. The default is 0.

func (DenoisePtrOutput) ToDenoisePtrOutput 

func (o DenoisePtrOutput) ToDenoisePtrOutput() DenoisePtrOutput

func (DenoisePtrOutput) ToDenoisePtrOutputWithContext 

func (o DenoisePtrOutput) ToDenoisePtrOutputWithContext(ctx context.Context) DenoisePtrOutput

func (DenoisePtrOutput) Tune 

func (o DenoisePtrOutput) Tune() pulumi.StringPtrOutput

Set the denoiser mode. The default is `standard`. Supported denoiser modes: - `standard` - `grain`

type DenoiseResponse 

type DenoiseResponse struct {
	// Set strength of the denoise. Enter a value between 0 and 1. The higher the value, the smoother the image. 0 is no denoising. The default is 0.
	Strength float64 `pulumi:"strength"`
	// Set the denoiser mode. The default is `standard`. Supported denoiser modes: - `standard` - `grain`
	Tune string `pulumi:"tune"`
}

Denoise preprocessing configuration. **Note:** This configuration is not supported.

type DenoiseResponseOutput 

type DenoiseResponseOutput struct{ *pulumi.OutputState }

Denoise preprocessing configuration. **Note:** This configuration is not supported.

func (DenoiseResponseOutput) ElementType 

func (DenoiseResponseOutput) ElementType() reflect.Type

func (DenoiseResponseOutput) Strength 

func (o DenoiseResponseOutput) Strength() pulumi.Float64Output

Set strength of the denoise. Enter a value between 0 and 1. The higher the value, the smoother the image. 0 is no denoising. The default is 0.

func (DenoiseResponseOutput) ToDenoiseResponseOutput 

func (o DenoiseResponseOutput) ToDenoiseResponseOutput() DenoiseResponseOutput

func (DenoiseResponseOutput) ToDenoiseResponseOutputWithContext 

func (o DenoiseResponseOutput) ToDenoiseResponseOutputWithContext(ctx context.Context) DenoiseResponseOutput

func (DenoiseResponseOutput) Tune 

func (o DenoiseResponseOutput) Tune() pulumi.StringOutput

Set the denoiser mode. The default is `standard`. Supported denoiser modes: - `standard` - `grain`

type DrmSystems added in v0.32.0 

type DrmSystems struct {
	// Clearkey configuration.
	Clearkey *Clearkey `pulumi:"clearkey"`
	// Fairplay configuration.
	Fairplay *Fairplay `pulumi:"fairplay"`
	// Playready configuration.
	Playready *Playready `pulumi:"playready"`
	// Widevine configuration.
	Widevine *Widevine `pulumi:"widevine"`
}

Defines configuration for DRM systems in use.

type DrmSystemsArgs added in v0.32.0 

type DrmSystemsArgs struct {
	// Clearkey configuration.
	Clearkey ClearkeyPtrInput `pulumi:"clearkey"`
	// Fairplay configuration.
	Fairplay FairplayPtrInput `pulumi:"fairplay"`
	// Playready configuration.
	Playready PlayreadyPtrInput `pulumi:"playready"`
	// Widevine configuration.
	Widevine WidevinePtrInput `pulumi:"widevine"`
}

Defines configuration for DRM systems in use.

func (DrmSystemsArgs) ElementType added in v0.32.0 

func (DrmSystemsArgs) ElementType() reflect.Type

func (DrmSystemsArgs) ToDrmSystemsOutput added in v0.32.0 

func (i DrmSystemsArgs) ToDrmSystemsOutput() DrmSystemsOutput

func (DrmSystemsArgs) ToDrmSystemsOutputWithContext added in v0.32.0 

func (i DrmSystemsArgs) ToDrmSystemsOutputWithContext(ctx context.Context) DrmSystemsOutput

type DrmSystemsInput added in v0.32.0 

type DrmSystemsInput interface {
	pulumi.Input

	ToDrmSystemsOutput() DrmSystemsOutput
	ToDrmSystemsOutputWithContext(context.Context) DrmSystemsOutput
}

DrmSystemsInput is an input type that accepts DrmSystemsArgs and DrmSystemsOutput values. You can construct a concrete instance of `DrmSystemsInput` via: 

DrmSystemsArgs{...}

type DrmSystemsOutput added in v0.32.0 

type DrmSystemsOutput struct{ *pulumi.OutputState }

Defines configuration for DRM systems in use.

func (DrmSystemsOutput) Clearkey added in v0.32.0 

func (o DrmSystemsOutput) Clearkey() ClearkeyPtrOutput

Clearkey configuration.

func (DrmSystemsOutput) ElementType added in v0.32.0 

func (DrmSystemsOutput) ElementType() reflect.Type

func (DrmSystemsOutput) Fairplay added in v0.32.0 

func (o DrmSystemsOutput) Fairplay() FairplayPtrOutput

Fairplay configuration.

func (DrmSystemsOutput) Playready added in v0.32.0 

func (o DrmSystemsOutput) Playready() PlayreadyPtrOutput

Playready configuration.

func (DrmSystemsOutput) ToDrmSystemsOutput added in v0.32.0 

func (o DrmSystemsOutput) ToDrmSystemsOutput() DrmSystemsOutput

func (DrmSystemsOutput) ToDrmSystemsOutputWithContext added in v0.32.0 

func (o DrmSystemsOutput) ToDrmSystemsOutputWithContext(ctx context.Context) DrmSystemsOutput

func (DrmSystemsOutput) Widevine added in v0.32.0 

func (o DrmSystemsOutput) Widevine() WidevinePtrOutput

Widevine configuration.

type DrmSystemsResponse added in v0.32.0 

type DrmSystemsResponse struct {
	// Clearkey configuration.
	Clearkey ClearkeyResponse `pulumi:"clearkey"`
	// Fairplay configuration.
	Fairplay FairplayResponse `pulumi:"fairplay"`
	// Playready configuration.
	Playready PlayreadyResponse `pulumi:"playready"`
	// Widevine configuration.
	Widevine WidevineResponse `pulumi:"widevine"`
}

Defines configuration for DRM systems in use.

type DrmSystemsResponseOutput added in v0.32.0 

type DrmSystemsResponseOutput struct{ *pulumi.OutputState }

Defines configuration for DRM systems in use.

func (DrmSystemsResponseOutput) Clearkey added in v0.32.0 

func (o DrmSystemsResponseOutput) Clearkey() ClearkeyResponseOutput

Clearkey configuration.

func (DrmSystemsResponseOutput) ElementType added in v0.32.0 

func (DrmSystemsResponseOutput) ElementType() reflect.Type

func (DrmSystemsResponseOutput) Fairplay added in v0.32.0 

func (o DrmSystemsResponseOutput) Fairplay() FairplayResponseOutput

Fairplay configuration.

func (DrmSystemsResponseOutput) Playready added in v0.32.0 

func (o DrmSystemsResponseOutput) Playready() PlayreadyResponseOutput

Playready configuration.

func (DrmSystemsResponseOutput) ToDrmSystemsResponseOutput added in v0.32.0 

func (o DrmSystemsResponseOutput) ToDrmSystemsResponseOutput() DrmSystemsResponseOutput

func (DrmSystemsResponseOutput) ToDrmSystemsResponseOutputWithContext added in v0.32.0 

func (o DrmSystemsResponseOutput) ToDrmSystemsResponseOutputWithContext(ctx context.Context) DrmSystemsResponseOutput

func (DrmSystemsResponseOutput) Widevine added in v0.32.0 

func (o DrmSystemsResponseOutput) Widevine() WidevineResponseOutput

Widevine configuration.

type EditAtom 

type EditAtom struct {
	// End time in seconds for the atom, relative to the input file timeline. When `end_time_offset` is not specified, the `inputs` are used until the end of the atom.
	EndTimeOffset *string `pulumi:"endTimeOffset"`
	// List of Input.key values identifying files that should be used in this atom. The listed `inputs` must have the same timeline.
	Inputs []string `pulumi:"inputs"`
	// A unique key for this atom. Must be specified when using advanced mapping.
	Key *string `pulumi:"key"`
	// Start time in seconds for the atom, relative to the input file timeline. The default is `0s`.
	StartTimeOffset *string `pulumi:"startTimeOffset"`
}

Edit atom.

type EditAtomArgs 

type EditAtomArgs struct {
	// End time in seconds for the atom, relative to the input file timeline. When `end_time_offset` is not specified, the `inputs` are used until the end of the atom.
	EndTimeOffset pulumi.StringPtrInput `pulumi:"endTimeOffset"`
	// List of Input.key values identifying files that should be used in this atom. The listed `inputs` must have the same timeline.
	Inputs pulumi.StringArrayInput `pulumi:"inputs"`
	// A unique key for this atom. Must be specified when using advanced mapping.
	Key pulumi.StringPtrInput `pulumi:"key"`
	// Start time in seconds for the atom, relative to the input file timeline. The default is `0s`.
	StartTimeOffset pulumi.StringPtrInput `pulumi:"startTimeOffset"`
}

Edit atom.

func (EditAtomArgs) ElementType 

func (EditAtomArgs) ElementType() reflect.Type

func (EditAtomArgs) ToEditAtomOutput 

func (i EditAtomArgs) ToEditAtomOutput() EditAtomOutput

func (EditAtomArgs) ToEditAtomOutputWithContext 

func (i EditAtomArgs) ToEditAtomOutputWithContext(ctx context.Context) EditAtomOutput

type EditAtomArray 

type EditAtomArray []EditAtomInput

func (EditAtomArray) ElementType 

func (EditAtomArray) ElementType() reflect.Type

func (EditAtomArray) ToEditAtomArrayOutput 

func (i EditAtomArray) ToEditAtomArrayOutput() EditAtomArrayOutput

func (EditAtomArray) ToEditAtomArrayOutputWithContext 

func (i EditAtomArray) ToEditAtomArrayOutputWithContext(ctx context.Context) EditAtomArrayOutput

type EditAtomArrayInput 

type EditAtomArrayInput interface {
	pulumi.Input

	ToEditAtomArrayOutput() EditAtomArrayOutput
	ToEditAtomArrayOutputWithContext(context.Context) EditAtomArrayOutput
}

EditAtomArrayInput is an input type that accepts EditAtomArray and EditAtomArrayOutput values. You can construct a concrete instance of `EditAtomArrayInput` via: 

EditAtomArray{ EditAtomArgs{...} }

type EditAtomArrayOutput 

type EditAtomArrayOutput struct{ *pulumi.OutputState }

func (EditAtomArrayOutput) ElementType 

func (EditAtomArrayOutput) ElementType() reflect.Type

func (EditAtomArrayOutput) Index 

func (o EditAtomArrayOutput) Index(i pulumi.IntInput) EditAtomOutput

func (EditAtomArrayOutput) ToEditAtomArrayOutput 

func (o EditAtomArrayOutput) ToEditAtomArrayOutput() EditAtomArrayOutput

func (EditAtomArrayOutput) ToEditAtomArrayOutputWithContext 

func (o EditAtomArrayOutput) ToEditAtomArrayOutputWithContext(ctx context.Context) EditAtomArrayOutput

type EditAtomInput 

type EditAtomInput interface {
	pulumi.Input

	ToEditAtomOutput() EditAtomOutput
	ToEditAtomOutputWithContext(context.Context) EditAtomOutput
}

EditAtomInput is an input type that accepts EditAtomArgs and EditAtomOutput values. You can construct a concrete instance of `EditAtomInput` via: 

EditAtomArgs{...}

type EditAtomOutput 

type EditAtomOutput struct{ *pulumi.OutputState }

Edit atom.

func (EditAtomOutput) ElementType 

func (EditAtomOutput) ElementType() reflect.Type

func (EditAtomOutput) EndTimeOffset 

func (o EditAtomOutput) EndTimeOffset() pulumi.StringPtrOutput

End time in seconds for the atom, relative to the input file timeline. When `end_time_offset` is not specified, the `inputs` are used until the end of the atom.

func (EditAtomOutput) Inputs 

func (o EditAtomOutput) Inputs() pulumi.StringArrayOutput

List of Input.key values identifying files that should be used in this atom. The listed `inputs` must have the same timeline.

func (EditAtomOutput) Key 

func (o EditAtomOutput) Key() pulumi.StringPtrOutput

A unique key for this atom. Must be specified when using advanced mapping.

func (EditAtomOutput) StartTimeOffset 

func (o EditAtomOutput) StartTimeOffset() pulumi.StringPtrOutput

Start time in seconds for the atom, relative to the input file timeline. The default is `0s`.

func (EditAtomOutput) ToEditAtomOutput 

func (o EditAtomOutput) ToEditAtomOutput() EditAtomOutput

func (EditAtomOutput) ToEditAtomOutputWithContext 

func (o EditAtomOutput) ToEditAtomOutputWithContext(ctx context.Context) EditAtomOutput

type EditAtomResponse 

type EditAtomResponse struct {
	// End time in seconds for the atom, relative to the input file timeline. When `end_time_offset` is not specified, the `inputs` are used until the end of the atom.
	EndTimeOffset string `pulumi:"endTimeOffset"`
	// List of Input.key values identifying files that should be used in this atom. The listed `inputs` must have the same timeline.
	Inputs []string `pulumi:"inputs"`
	// A unique key for this atom. Must be specified when using advanced mapping.
	Key string `pulumi:"key"`
	// Start time in seconds for the atom, relative to the input file timeline. The default is `0s`.
	StartTimeOffset string `pulumi:"startTimeOffset"`
}

Edit atom.

type EditAtomResponseArrayOutput 

type EditAtomResponseArrayOutput struct{ *pulumi.OutputState }

func (EditAtomResponseArrayOutput) ElementType 

func (EditAtomResponseArrayOutput) ElementType() reflect.Type

func (EditAtomResponseArrayOutput) Index 

func (o EditAtomResponseArrayOutput) Index(i pulumi.IntInput) EditAtomResponseOutput

func (EditAtomResponseArrayOutput) ToEditAtomResponseArrayOutput 

func (o EditAtomResponseArrayOutput) ToEditAtomResponseArrayOutput() EditAtomResponseArrayOutput

func (EditAtomResponseArrayOutput) ToEditAtomResponseArrayOutputWithContext 

func (o EditAtomResponseArrayOutput) ToEditAtomResponseArrayOutputWithContext(ctx context.Context) EditAtomResponseArrayOutput

type EditAtomResponseOutput 

type EditAtomResponseOutput struct{ *pulumi.OutputState }

Edit atom.

func (EditAtomResponseOutput) ElementType 

func (EditAtomResponseOutput) ElementType() reflect.Type

func (EditAtomResponseOutput) EndTimeOffset 

func (o EditAtomResponseOutput) EndTimeOffset() pulumi.StringOutput

End time in seconds for the atom, relative to the input file timeline. When `end_time_offset` is not specified, the `inputs` are used until the end of the atom.

func (EditAtomResponseOutput) Inputs 

func (o EditAtomResponseOutput) Inputs() pulumi.StringArrayOutput

List of Input.key values identifying files that should be used in this atom. The listed `inputs` must have the same timeline.

func (EditAtomResponseOutput) Key 

func (o EditAtomResponseOutput) Key() pulumi.StringOutput

A unique key for this atom. Must be specified when using advanced mapping.

func (EditAtomResponseOutput) StartTimeOffset 

func (o EditAtomResponseOutput) StartTimeOffset() pulumi.StringOutput

Start time in seconds for the atom, relative to the input file timeline. The default is `0s`.

func (EditAtomResponseOutput) ToEditAtomResponseOutput 

func (o EditAtomResponseOutput) ToEditAtomResponseOutput() EditAtomResponseOutput

func (EditAtomResponseOutput) ToEditAtomResponseOutputWithContext 

func (o EditAtomResponseOutput) ToEditAtomResponseOutputWithContext(ctx context.Context) EditAtomResponseOutput

type ElementaryStream 

type ElementaryStream struct {
	// Encoding of an audio stream.
	AudioStream *AudioStream `pulumi:"audioStream"`
	// A unique key for this elementary stream.
	Key *string `pulumi:"key"`
	// Encoding of a text stream. For example, closed captions or subtitles.
	TextStream *TextStream `pulumi:"textStream"`
	// Encoding of a video stream.
	VideoStream *VideoStream `pulumi:"videoStream"`
}

Encoding of an input file such as an audio, video, or text track. Elementary streams must be packaged before mapping and sharing between different output formats.

type ElementaryStreamArgs 

type ElementaryStreamArgs struct {
	// Encoding of an audio stream.
	AudioStream AudioStreamPtrInput `pulumi:"audioStream"`
	// A unique key for this elementary stream.
	Key pulumi.StringPtrInput `pulumi:"key"`
	// Encoding of a text stream. For example, closed captions or subtitles.
	TextStream TextStreamPtrInput `pulumi:"textStream"`
	// Encoding of a video stream.
	VideoStream VideoStreamPtrInput `pulumi:"videoStream"`
}

Encoding of an input file such as an audio, video, or text track. Elementary streams must be packaged before mapping and sharing between different output formats.

func (ElementaryStreamArgs) ElementType 

func (ElementaryStreamArgs) ElementType() reflect.Type

func (ElementaryStreamArgs) ToElementaryStreamOutput 

func (i ElementaryStreamArgs) ToElementaryStreamOutput() ElementaryStreamOutput

func (ElementaryStreamArgs) ToElementaryStreamOutputWithContext 

func (i ElementaryStreamArgs) ToElementaryStreamOutputWithContext(ctx context.Context) ElementaryStreamOutput

type ElementaryStreamArray 

type ElementaryStreamArray []ElementaryStreamInput

func (ElementaryStreamArray) ElementType 

func (ElementaryStreamArray) ElementType() reflect.Type

func (ElementaryStreamArray) ToElementaryStreamArrayOutput 

func (i ElementaryStreamArray) ToElementaryStreamArrayOutput() ElementaryStreamArrayOutput

func (ElementaryStreamArray) ToElementaryStreamArrayOutputWithContext 

func (i ElementaryStreamArray) ToElementaryStreamArrayOutputWithContext(ctx context.Context) ElementaryStreamArrayOutput

type ElementaryStreamArrayInput 

type ElementaryStreamArrayInput interface {
	pulumi.Input

	ToElementaryStreamArrayOutput() ElementaryStreamArrayOutput
	ToElementaryStreamArrayOutputWithContext(context.Context) ElementaryStreamArrayOutput
}

ElementaryStreamArrayInput is an input type that accepts ElementaryStreamArray and ElementaryStreamArrayOutput values. You can construct a concrete instance of `ElementaryStreamArrayInput` via: 

ElementaryStreamArray{ ElementaryStreamArgs{...} }

type ElementaryStreamArrayOutput 

type ElementaryStreamArrayOutput struct{ *pulumi.OutputState }

func (ElementaryStreamArrayOutput) ElementType 

func (ElementaryStreamArrayOutput) ElementType() reflect.Type

func (ElementaryStreamArrayOutput) Index 

func (o ElementaryStreamArrayOutput) Index(i pulumi.IntInput) ElementaryStreamOutput

func (ElementaryStreamArrayOutput) ToElementaryStreamArrayOutput 

func (o ElementaryStreamArrayOutput) ToElementaryStreamArrayOutput() ElementaryStreamArrayOutput

func (ElementaryStreamArrayOutput) ToElementaryStreamArrayOutputWithContext 

func (o ElementaryStreamArrayOutput) ToElementaryStreamArrayOutputWithContext(ctx context.Context) ElementaryStreamArrayOutput

type ElementaryStreamInput 

type ElementaryStreamInput interface {
	pulumi.Input

	ToElementaryStreamOutput() ElementaryStreamOutput
	ToElementaryStreamOutputWithContext(context.Context) ElementaryStreamOutput
}

ElementaryStreamInput is an input type that accepts ElementaryStreamArgs and ElementaryStreamOutput values. You can construct a concrete instance of `ElementaryStreamInput` via: 

ElementaryStreamArgs{...}

type ElementaryStreamOutput 

type ElementaryStreamOutput struct{ *pulumi.OutputState }

Encoding of an input file such as an audio, video, or text track. Elementary streams must be packaged before mapping and sharing between different output formats.

func (ElementaryStreamOutput) AudioStream 

func (o ElementaryStreamOutput) AudioStream() AudioStreamPtrOutput

Encoding of an audio stream.

func (ElementaryStreamOutput) ElementType 

func (ElementaryStreamOutput) ElementType() reflect.Type

func (ElementaryStreamOutput) Key 

func (o ElementaryStreamOutput) Key() pulumi.StringPtrOutput

A unique key for this elementary stream.

func (ElementaryStreamOutput) TextStream 

func (o ElementaryStreamOutput) TextStream() TextStreamPtrOutput

Encoding of a text stream. For example, closed captions or subtitles.

func (ElementaryStreamOutput) ToElementaryStreamOutput 

func (o ElementaryStreamOutput) ToElementaryStreamOutput() ElementaryStreamOutput

func (ElementaryStreamOutput) ToElementaryStreamOutputWithContext 

func (o ElementaryStreamOutput) ToElementaryStreamOutputWithContext(ctx context.Context) ElementaryStreamOutput

func (ElementaryStreamOutput) VideoStream 

func (o ElementaryStreamOutput) VideoStream() VideoStreamPtrOutput

Encoding of a video stream.

type ElementaryStreamResponse 

type ElementaryStreamResponse struct {
	// Encoding of an audio stream.
	AudioStream AudioStreamResponse `pulumi:"audioStream"`
	// A unique key for this elementary stream.
	Key string `pulumi:"key"`
	// Encoding of a text stream. For example, closed captions or subtitles.
	TextStream TextStreamResponse `pulumi:"textStream"`
	// Encoding of a video stream.
	VideoStream VideoStreamResponse `pulumi:"videoStream"`
}

Encoding of an input file such as an audio, video, or text track. Elementary streams must be packaged before mapping and sharing between different output formats.

type ElementaryStreamResponseArrayOutput 

type ElementaryStreamResponseArrayOutput struct{ *pulumi.OutputState }

func (ElementaryStreamResponseArrayOutput) ElementType 

func (ElementaryStreamResponseArrayOutput) ElementType() reflect.Type

func (ElementaryStreamResponseArrayOutput) Index 

func (o ElementaryStreamResponseArrayOutput) Index(i pulumi.IntInput) ElementaryStreamResponseOutput

func (ElementaryStreamResponseArrayOutput) ToElementaryStreamResponseArrayOutput 

func (o ElementaryStreamResponseArrayOutput) ToElementaryStreamResponseArrayOutput() ElementaryStreamResponseArrayOutput

func (ElementaryStreamResponseArrayOutput) ToElementaryStreamResponseArrayOutputWithContext 

func (o ElementaryStreamResponseArrayOutput) ToElementaryStreamResponseArrayOutputWithContext(ctx context.Context) ElementaryStreamResponseArrayOutput

type ElementaryStreamResponseOutput 

type ElementaryStreamResponseOutput struct{ *pulumi.OutputState }

Encoding of an input file such as an audio, video, or text track. Elementary streams must be packaged before mapping and sharing between different output formats.

func (ElementaryStreamResponseOutput) AudioStream 

func (o ElementaryStreamResponseOutput) AudioStream() AudioStreamResponseOutput

Encoding of an audio stream.

func (ElementaryStreamResponseOutput) ElementType 

func (ElementaryStreamResponseOutput) ElementType() reflect.Type

func (ElementaryStreamResponseOutput) Key 

func (o ElementaryStreamResponseOutput) Key() pulumi.StringOutput

A unique key for this elementary stream.

func (ElementaryStreamResponseOutput) TextStream 

func (o ElementaryStreamResponseOutput) TextStream() TextStreamResponseOutput

Encoding of a text stream. For example, closed captions or subtitles.

func (ElementaryStreamResponseOutput) ToElementaryStreamResponseOutput 

func (o ElementaryStreamResponseOutput) ToElementaryStreamResponseOutput() ElementaryStreamResponseOutput

func (ElementaryStreamResponseOutput) ToElementaryStreamResponseOutputWithContext 

func (o ElementaryStreamResponseOutput) ToElementaryStreamResponseOutputWithContext(ctx context.Context) ElementaryStreamResponseOutput

func (ElementaryStreamResponseOutput) VideoStream 

func (o ElementaryStreamResponseOutput) VideoStream() VideoStreamResponseOutput

Encoding of a video stream.

type Encryption added in v0.32.0 

type Encryption struct {
	// Configuration for AES-128 encryption.
	Aes128 *Aes128Encryption `pulumi:"aes128"`
	// DRM system(s) to use; at least one must be specified. If a DRM system is omitted, it is considered disabled.
	DrmSystems DrmSystems `pulumi:"drmSystems"`
	// Identifier for this set of encryption options.
	Id string `pulumi:"id"`
	// Configuration for MPEG Common Encryption (MPEG-CENC).
	MpegCenc *MpegCommonEncryption `pulumi:"mpegCenc"`
	// Configuration for SAMPLE-AES encryption.
	SampleAes *SampleAesEncryption `pulumi:"sampleAes"`
	// Keys are stored in Google Secret Manager.
	SecretManagerKeySource *SecretManagerSource `pulumi:"secretManagerKeySource"`
}

Encryption settings.

type EncryptionArgs added in v0.32.0 

type EncryptionArgs struct {
	// Configuration for AES-128 encryption.
	Aes128 Aes128EncryptionPtrInput `pulumi:"aes128"`
	// DRM system(s) to use; at least one must be specified. If a DRM system is omitted, it is considered disabled.
	DrmSystems DrmSystemsInput `pulumi:"drmSystems"`
	// Identifier for this set of encryption options.
	Id pulumi.StringInput `pulumi:"id"`
	// Configuration for MPEG Common Encryption (MPEG-CENC).
	MpegCenc MpegCommonEncryptionPtrInput `pulumi:"mpegCenc"`
	// Configuration for SAMPLE-AES encryption.
	SampleAes SampleAesEncryptionPtrInput `pulumi:"sampleAes"`
	// Keys are stored in Google Secret Manager.
	SecretManagerKeySource SecretManagerSourcePtrInput `pulumi:"secretManagerKeySource"`
}

Encryption settings.

func (EncryptionArgs) ElementType added in v0.32.0 

func (EncryptionArgs) ElementType() reflect.Type

func (EncryptionArgs) ToEncryptionOutput added in v0.32.0 

func (i EncryptionArgs) ToEncryptionOutput() EncryptionOutput

func (EncryptionArgs) ToEncryptionOutputWithContext added in v0.32.0 

func (i EncryptionArgs) ToEncryptionOutputWithContext(ctx context.Context) EncryptionOutput

type EncryptionArray added in v0.32.0 

type EncryptionArray []EncryptionInput

func (EncryptionArray) ElementType added in v0.32.0 

func (EncryptionArray) ElementType() reflect.Type

func (EncryptionArray) ToEncryptionArrayOutput added in v0.32.0 

func (i EncryptionArray) ToEncryptionArrayOutput() EncryptionArrayOutput

func (EncryptionArray) ToEncryptionArrayOutputWithContext added in v0.32.0 

func (i EncryptionArray) ToEncryptionArrayOutputWithContext(ctx context.Context) EncryptionArrayOutput

type EncryptionArrayInput added in v0.32.0 

type EncryptionArrayInput interface {
	pulumi.Input

	ToEncryptionArrayOutput() EncryptionArrayOutput
	ToEncryptionArrayOutputWithContext(context.Context) EncryptionArrayOutput
}

EncryptionArrayInput is an input type that accepts EncryptionArray and EncryptionArrayOutput values. You can construct a concrete instance of `EncryptionArrayInput` via: 

EncryptionArray{ EncryptionArgs{...} }

type EncryptionArrayOutput added in v0.32.0 

type EncryptionArrayOutput struct{ *pulumi.OutputState }

func (EncryptionArrayOutput) ElementType added in v0.32.0 

func (EncryptionArrayOutput) ElementType() reflect.Type

func (EncryptionArrayOutput) Index added in v0.32.0 

func (o EncryptionArrayOutput) Index(i pulumi.IntInput) EncryptionOutput

func (EncryptionArrayOutput) ToEncryptionArrayOutput added in v0.32.0 

func (o EncryptionArrayOutput) ToEncryptionArrayOutput() EncryptionArrayOutput

func (EncryptionArrayOutput) ToEncryptionArrayOutputWithContext added in v0.32.0 

func (o EncryptionArrayOutput) ToEncryptionArrayOutputWithContext(ctx context.Context) EncryptionArrayOutput

type EncryptionInput added in v0.32.0 

type EncryptionInput interface {
	pulumi.Input

	ToEncryptionOutput() EncryptionOutput
	ToEncryptionOutputWithContext(context.Context) EncryptionOutput
}

EncryptionInput is an input type that accepts EncryptionArgs and EncryptionOutput values. You can construct a concrete instance of `EncryptionInput` via: 

EncryptionArgs{...}

type EncryptionOutput added in v0.32.0 

type EncryptionOutput struct{ *pulumi.OutputState }

Encryption settings.

func (EncryptionOutput) Aes128 added in v0.32.0 

func (o EncryptionOutput) Aes128() Aes128EncryptionPtrOutput

Configuration for AES-128 encryption.

func (EncryptionOutput) DrmSystems added in v0.32.0 

func (o EncryptionOutput) DrmSystems() DrmSystemsOutput

DRM system(s) to use; at least one must be specified. If a DRM system is omitted, it is considered disabled.

func (EncryptionOutput) ElementType added in v0.32.0 

func (EncryptionOutput) ElementType() reflect.Type

func (EncryptionOutput) Id added in v0.32.0 

func (o EncryptionOutput) Id() pulumi.StringOutput

Identifier for this set of encryption options.

func (EncryptionOutput) MpegCenc added in v0.32.0 

func (o EncryptionOutput) MpegCenc() MpegCommonEncryptionPtrOutput

Configuration for MPEG Common Encryption (MPEG-CENC).

func (EncryptionOutput) SampleAes added in v0.32.0 

func (o EncryptionOutput) SampleAes() SampleAesEncryptionPtrOutput

Configuration for SAMPLE-AES encryption.

func (EncryptionOutput) SecretManagerKeySource added in v0.32.0 

func (o EncryptionOutput) SecretManagerKeySource() SecretManagerSourcePtrOutput

Keys are stored in Google Secret Manager.

func (EncryptionOutput) ToEncryptionOutput added in v0.32.0 

func (o EncryptionOutput) ToEncryptionOutput() EncryptionOutput

func (EncryptionOutput) ToEncryptionOutputWithContext added in v0.32.0 

func (o EncryptionOutput) ToEncryptionOutputWithContext(ctx context.Context) EncryptionOutput

type EncryptionResponse added in v0.32.0 

type EncryptionResponse struct {
	// Configuration for AES-128 encryption.
	Aes128 Aes128EncryptionResponse `pulumi:"aes128"`
	// DRM system(s) to use; at least one must be specified. If a DRM system is omitted, it is considered disabled.
	DrmSystems DrmSystemsResponse `pulumi:"drmSystems"`
	// Configuration for MPEG Common Encryption (MPEG-CENC).
	MpegCenc MpegCommonEncryptionResponse `pulumi:"mpegCenc"`
	// Configuration for SAMPLE-AES encryption.
	SampleAes SampleAesEncryptionResponse `pulumi:"sampleAes"`
	// Keys are stored in Google Secret Manager.
	SecretManagerKeySource SecretManagerSourceResponse `pulumi:"secretManagerKeySource"`
}

Encryption settings.

type EncryptionResponseArrayOutput added in v0.32.0 

type EncryptionResponseArrayOutput struct{ *pulumi.OutputState }

func (EncryptionResponseArrayOutput) ElementType added in v0.32.0 

func (EncryptionResponseArrayOutput) ElementType() reflect.Type

func (EncryptionResponseArrayOutput) Index added in v0.32.0 

func (o EncryptionResponseArrayOutput) Index(i pulumi.IntInput) EncryptionResponseOutput

func (EncryptionResponseArrayOutput) ToEncryptionResponseArrayOutput added in v0.32.0 

func (o EncryptionResponseArrayOutput) ToEncryptionResponseArrayOutput() EncryptionResponseArrayOutput

func (EncryptionResponseArrayOutput) ToEncryptionResponseArrayOutputWithContext added in v0.32.0 

func (o EncryptionResponseArrayOutput) ToEncryptionResponseArrayOutputWithContext(ctx context.Context) EncryptionResponseArrayOutput

type EncryptionResponseOutput added in v0.32.0 

type EncryptionResponseOutput struct{ *pulumi.OutputState }

Encryption settings.

func (EncryptionResponseOutput) Aes128 added in v0.32.0 

func (o EncryptionResponseOutput) Aes128() Aes128EncryptionResponseOutput

Configuration for AES-128 encryption.

func (EncryptionResponseOutput) DrmSystems added in v0.32.0 

func (o EncryptionResponseOutput) DrmSystems() DrmSystemsResponseOutput

DRM system(s) to use; at least one must be specified. If a DRM system is omitted, it is considered disabled.

func (EncryptionResponseOutput) ElementType added in v0.32.0 

func (EncryptionResponseOutput) ElementType() reflect.Type

func (EncryptionResponseOutput) MpegCenc added in v0.32.0 

func (o EncryptionResponseOutput) MpegCenc() MpegCommonEncryptionResponseOutput

Configuration for MPEG Common Encryption (MPEG-CENC).

func (EncryptionResponseOutput) SampleAes added in v0.32.0 

func (o EncryptionResponseOutput) SampleAes() SampleAesEncryptionResponseOutput

Configuration for SAMPLE-AES encryption.

func (EncryptionResponseOutput) SecretManagerKeySource added in v0.32.0 

func (o EncryptionResponseOutput) SecretManagerKeySource() SecretManagerSourceResponseOutput

Keys are stored in Google Secret Manager.

func (EncryptionResponseOutput) ToEncryptionResponseOutput added in v0.32.0 

func (o EncryptionResponseOutput) ToEncryptionResponseOutput() EncryptionResponseOutput

func (EncryptionResponseOutput) ToEncryptionResponseOutputWithContext added in v0.32.0 

func (o EncryptionResponseOutput) ToEncryptionResponseOutputWithContext(ctx context.Context) EncryptionResponseOutput

type Fairplay added in v0.32.0 

type Fairplay struct {
}

Fairplay configuration.

type FairplayArgs added in v0.32.0 

type FairplayArgs struct {
}

Fairplay configuration.

func (FairplayArgs) ElementType added in v0.32.0 

func (FairplayArgs) ElementType() reflect.Type

func (FairplayArgs) ToFairplayOutput added in v0.32.0 

func (i FairplayArgs) ToFairplayOutput() FairplayOutput

func (FairplayArgs) ToFairplayOutputWithContext added in v0.32.0 

func (i FairplayArgs) ToFairplayOutputWithContext(ctx context.Context) FairplayOutput

func (FairplayArgs) ToFairplayPtrOutput added in v0.32.0 

func (i FairplayArgs) ToFairplayPtrOutput() FairplayPtrOutput

func (FairplayArgs) ToFairplayPtrOutputWithContext added in v0.32.0 

func (i FairplayArgs) ToFairplayPtrOutputWithContext(ctx context.Context) FairplayPtrOutput

type FairplayInput added in v0.32.0 

type FairplayInput interface {
	pulumi.Input

	ToFairplayOutput() FairplayOutput
	ToFairplayOutputWithContext(context.Context) FairplayOutput
}

FairplayInput is an input type that accepts FairplayArgs and FairplayOutput values. You can construct a concrete instance of `FairplayInput` via: 

FairplayArgs{...}

type FairplayOutput added in v0.32.0 

type FairplayOutput struct{ *pulumi.OutputState }

Fairplay configuration.

func (FairplayOutput) ElementType added in v0.32.0 

func (FairplayOutput) ElementType() reflect.Type

func (FairplayOutput) ToFairplayOutput added in v0.32.0 

func (o FairplayOutput) ToFairplayOutput() FairplayOutput

func (FairplayOutput) ToFairplayOutputWithContext added in v0.32.0 

func (o FairplayOutput) ToFairplayOutputWithContext(ctx context.Context) FairplayOutput

func (FairplayOutput) ToFairplayPtrOutput added in v0.32.0 

func (o FairplayOutput) ToFairplayPtrOutput() FairplayPtrOutput

func (FairplayOutput) ToFairplayPtrOutputWithContext added in v0.32.0 

func (o FairplayOutput) ToFairplayPtrOutputWithContext(ctx context.Context) FairplayPtrOutput

type FairplayPtrInput added in v0.32.0 

type FairplayPtrInput interface {
	pulumi.Input

	ToFairplayPtrOutput() FairplayPtrOutput
	ToFairplayPtrOutputWithContext(context.Context) FairplayPtrOutput
}

FairplayPtrInput is an input type that accepts FairplayArgs, FairplayPtr and FairplayPtrOutput values. You can construct a concrete instance of `FairplayPtrInput` via: 

        FairplayArgs{...}

or:

        nil

func FairplayPtr added in v0.32.0 

func FairplayPtr(v *FairplayArgs) FairplayPtrInput

type FairplayPtrOutput added in v0.32.0 

type FairplayPtrOutput struct{ *pulumi.OutputState }

func (FairplayPtrOutput) Elem added in v0.32.0 

func (o FairplayPtrOutput) Elem() FairplayOutput

func (FairplayPtrOutput) ElementType added in v0.32.0 

func (FairplayPtrOutput) ElementType() reflect.Type

func (FairplayPtrOutput) ToFairplayPtrOutput added in v0.32.0 

func (o FairplayPtrOutput) ToFairplayPtrOutput() FairplayPtrOutput

func (FairplayPtrOutput) ToFairplayPtrOutputWithContext added in v0.32.0 

func (o FairplayPtrOutput) ToFairplayPtrOutputWithContext(ctx context.Context) FairplayPtrOutput

type FairplayResponse added in v0.32.0 

type FairplayResponse struct {
}

Fairplay configuration.

type FairplayResponseOutput added in v0.32.0 

type FairplayResponseOutput struct{ *pulumi.OutputState }

Fairplay configuration.

func (FairplayResponseOutput) ElementType added in v0.32.0 

func (FairplayResponseOutput) ElementType() reflect.Type

func (FairplayResponseOutput) ToFairplayResponseOutput added in v0.32.0 

func (o FairplayResponseOutput) ToFairplayResponseOutput() FairplayResponseOutput

func (FairplayResponseOutput) ToFairplayResponseOutputWithContext added in v0.32.0 

func (o FairplayResponseOutput) ToFairplayResponseOutputWithContext(ctx context.Context) FairplayResponseOutput

type Fmp4Config added in v0.32.0 

type Fmp4Config struct {
	// Optional. Specify the codec tag string that will be used in the media bitstream. When not specified, the codec appropriate value is used. Supported H265 codec tags: - `hvc1` (default) - `hev1`
	CodecTag *string `pulumi:"codecTag"`
}

`fmp4` container configuration.

type Fmp4ConfigArgs added in v0.32.0 

type Fmp4ConfigArgs struct {
	// Optional. Specify the codec tag string that will be used in the media bitstream. When not specified, the codec appropriate value is used. Supported H265 codec tags: - `hvc1` (default) - `hev1`
	CodecTag pulumi.StringPtrInput `pulumi:"codecTag"`
}

`fmp4` container configuration.

func (Fmp4ConfigArgs) ElementType added in v0.32.0 

func (Fmp4ConfigArgs) ElementType() reflect.Type

func (Fmp4ConfigArgs) ToFmp4ConfigOutput added in v0.32.0 

func (i Fmp4ConfigArgs) ToFmp4ConfigOutput() Fmp4ConfigOutput

func (Fmp4ConfigArgs) ToFmp4ConfigOutputWithContext added in v0.32.0 

func (i Fmp4ConfigArgs) ToFmp4ConfigOutputWithContext(ctx context.Context) Fmp4ConfigOutput

func (Fmp4ConfigArgs) ToFmp4ConfigPtrOutput added in v0.32.0 

func (i Fmp4ConfigArgs) ToFmp4ConfigPtrOutput() Fmp4ConfigPtrOutput

func (Fmp4ConfigArgs) ToFmp4ConfigPtrOutputWithContext added in v0.32.0 

func (i Fmp4ConfigArgs) ToFmp4ConfigPtrOutputWithContext(ctx context.Context) Fmp4ConfigPtrOutput

type Fmp4ConfigInput added in v0.32.0 

type Fmp4ConfigInput interface {
	pulumi.Input

	ToFmp4ConfigOutput() Fmp4ConfigOutput
	ToFmp4ConfigOutputWithContext(context.Context) Fmp4ConfigOutput
}

Fmp4ConfigInput is an input type that accepts Fmp4ConfigArgs and Fmp4ConfigOutput values. You can construct a concrete instance of `Fmp4ConfigInput` via: 

Fmp4ConfigArgs{...}

type Fmp4ConfigOutput added in v0.32.0 

type Fmp4ConfigOutput struct{ *pulumi.OutputState }

`fmp4` container configuration.

func (Fmp4ConfigOutput) CodecTag added in v0.32.0 

func (o Fmp4ConfigOutput) CodecTag() pulumi.StringPtrOutput

Optional. Specify the codec tag string that will be used in the media bitstream. When not specified, the codec appropriate value is used. Supported H265 codec tags: - `hvc1` (default) - `hev1`

func (Fmp4ConfigOutput) ElementType added in v0.32.0 

func (Fmp4ConfigOutput) ElementType() reflect.Type

func (Fmp4ConfigOutput) ToFmp4ConfigOutput added in v0.32.0 

func (o Fmp4ConfigOutput) ToFmp4ConfigOutput() Fmp4ConfigOutput

func (Fmp4ConfigOutput) ToFmp4ConfigOutputWithContext added in v0.32.0 

func (o Fmp4ConfigOutput) ToFmp4ConfigOutputWithContext(ctx context.Context) Fmp4ConfigOutput

func (Fmp4ConfigOutput) ToFmp4ConfigPtrOutput added in v0.32.0 

func (o Fmp4ConfigOutput) ToFmp4ConfigPtrOutput() Fmp4ConfigPtrOutput

func (Fmp4ConfigOutput) ToFmp4ConfigPtrOutputWithContext added in v0.32.0 

func (o Fmp4ConfigOutput) ToFmp4ConfigPtrOutputWithContext(ctx context.Context) Fmp4ConfigPtrOutput

type Fmp4ConfigPtrInput added in v0.32.0 

type Fmp4ConfigPtrInput interface {
	pulumi.Input

	ToFmp4ConfigPtrOutput() Fmp4ConfigPtrOutput
	ToFmp4ConfigPtrOutputWithContext(context.Context) Fmp4ConfigPtrOutput
}

Fmp4ConfigPtrInput is an input type that accepts Fmp4ConfigArgs, Fmp4ConfigPtr and Fmp4ConfigPtrOutput values. You can construct a concrete instance of `Fmp4ConfigPtrInput` via: 

        Fmp4ConfigArgs{...}

or:

        nil

func Fmp4ConfigPtr added in v0.32.0 

func Fmp4ConfigPtr(v *Fmp4ConfigArgs) Fmp4ConfigPtrInput

type Fmp4ConfigPtrOutput added in v0.32.0 

type Fmp4ConfigPtrOutput struct{ *pulumi.OutputState }

func (Fmp4ConfigPtrOutput) CodecTag added in v0.32.0 

func (o Fmp4ConfigPtrOutput) CodecTag() pulumi.StringPtrOutput

Optional. Specify the codec tag string that will be used in the media bitstream. When not specified, the codec appropriate value is used. Supported H265 codec tags: - `hvc1` (default) - `hev1`

func (Fmp4ConfigPtrOutput) Elem added in v0.32.0 

func (o Fmp4ConfigPtrOutput) Elem() Fmp4ConfigOutput

func (Fmp4ConfigPtrOutput) ElementType added in v0.32.0 

func (Fmp4ConfigPtrOutput) ElementType() reflect.Type

func (Fmp4ConfigPtrOutput) ToFmp4ConfigPtrOutput added in v0.32.0 

func (o Fmp4ConfigPtrOutput) ToFmp4ConfigPtrOutput() Fmp4ConfigPtrOutput

func (Fmp4ConfigPtrOutput) ToFmp4ConfigPtrOutputWithContext added in v0.32.0 

func (o Fmp4ConfigPtrOutput) ToFmp4ConfigPtrOutputWithContext(ctx context.Context) Fmp4ConfigPtrOutput

type Fmp4ConfigResponse added in v0.32.0 

type Fmp4ConfigResponse struct {
	// Optional. Specify the codec tag string that will be used in the media bitstream. When not specified, the codec appropriate value is used. Supported H265 codec tags: - `hvc1` (default) - `hev1`
	CodecTag string `pulumi:"codecTag"`
}

`fmp4` container configuration.

type Fmp4ConfigResponseOutput added in v0.32.0 

type Fmp4ConfigResponseOutput struct{ *pulumi.OutputState }

`fmp4` container configuration.

func (Fmp4ConfigResponseOutput) CodecTag added in v0.32.0 

func (o Fmp4ConfigResponseOutput) CodecTag() pulumi.StringOutput

Optional. Specify the codec tag string that will be used in the media bitstream. When not specified, the codec appropriate value is used. Supported H265 codec tags: - `hvc1` (default) - `hev1`

func (Fmp4ConfigResponseOutput) ElementType added in v0.32.0 

func (Fmp4ConfigResponseOutput) ElementType() reflect.Type

func (Fmp4ConfigResponseOutput) ToFmp4ConfigResponseOutput added in v0.32.0 

func (o Fmp4ConfigResponseOutput) ToFmp4ConfigResponseOutput() Fmp4ConfigResponseOutput

func (Fmp4ConfigResponseOutput) ToFmp4ConfigResponseOutputWithContext added in v0.32.0 

func (o Fmp4ConfigResponseOutput) ToFmp4ConfigResponseOutputWithContext(ctx context.Context) Fmp4ConfigResponseOutput

type H264CodecSettings 

type H264CodecSettings struct {
	// Specifies whether an open Group of Pictures (GOP) structure should be allowed or not. The default is `false`.
	AllowOpenGop *bool `pulumi:"allowOpenGop"`
	// Specify the intensity of the adaptive quantizer (AQ). Must be between 0 and 1, where 0 disables the quantizer and 1 maximizes the quantizer. A higher value equals a lower bitrate but smoother image. The default is 0.
	AqStrength *float64 `pulumi:"aqStrength"`
	// The number of consecutive B-frames. Must be greater than or equal to zero. Must be less than H264CodecSettings.gop_frame_count if set. The default is 0.
	BFrameCount *int `pulumi:"bFrameCount"`
	// Allow B-pyramid for reference frame selection. This may not be supported on all decoders. The default is `false`.
	BPyramid *bool `pulumi:"bPyramid"`
	// The video bitrate in bits per second. The minimum value is 1,000. The maximum value is 800,000,000.
	BitrateBps int `pulumi:"bitrateBps"`
	// Target CRF level. Must be between 10 and 36, where 10 is the highest quality and 36 is the most efficient compression. The default is 21.
	CrfLevel *int `pulumi:"crfLevel"`
	// Use two-pass encoding strategy to achieve better video quality. H264CodecSettings.rate_control_mode must be `vbr`. The default is `false`.
	EnableTwoPass *bool `pulumi:"enableTwoPass"`
	// The entropy coder to use. The default is `cabac`. Supported entropy coders: - `cavlc` - `cabac`
	EntropyCoder *string `pulumi:"entropyCoder"`
	// The target video frame rate in frames per second (FPS). Must be less than or equal to 120. Will default to the input frame rate if larger than the input frame rate. The API will generate an output FPS that is divisible by the input FPS, and smaller or equal to the target FPS. See [Calculating frame rate](https://cloud.google.com/transcoder/docs/concepts/frame-rate) for more information.
	FrameRate float64 `pulumi:"frameRate"`
	// Select the GOP size based on the specified duration. The default is `3s`. Note that `gopDuration` must be less than or equal to [`segmentDuration`](#SegmentSettings), and [`segmentDuration`](#SegmentSettings) must be divisible by `gopDuration`.
	GopDuration *string `pulumi:"gopDuration"`
	// Select the GOP size based on the specified frame count. Must be greater than zero.
	GopFrameCount *int `pulumi:"gopFrameCount"`
	// The height of the video in pixels. Must be an even integer. When not specified, the height is adjusted to match the specified width and input aspect ratio. If both are omitted, the input height is used. For portrait videos that contain horizontal ASR and rotation metadata, provide the height, in pixels, per the horizontal ASR. The API calculates the width per the horizontal ASR. The API detects any rotation metadata and swaps the requested height and width for the output.
	HeightPixels *int `pulumi:"heightPixels"`
	// Pixel format to use. The default is `yuv420p`. Supported pixel formats: - `yuv420p` pixel format - `yuv422p` pixel format - `yuv444p` pixel format - `yuv420p10` 10-bit HDR pixel format - `yuv422p10` 10-bit HDR pixel format - `yuv444p10` 10-bit HDR pixel format - `yuv420p12` 12-bit HDR pixel format - `yuv422p12` 12-bit HDR pixel format - `yuv444p12` 12-bit HDR pixel format
	PixelFormat *string `pulumi:"pixelFormat"`
	// Enforces the specified codec preset. The default is `veryfast`. The available options are [FFmpeg-compatible](https://trac.ffmpeg.org/wiki/Encode/H.264#Preset). Note that certain values for this field may cause the transcoder to override other fields you set in the `H264CodecSettings` message.
	Preset *string `pulumi:"preset"`
	// Enforces the specified codec profile. The following profiles are supported: * `baseline` * `main` * `high` (default) The available options are [FFmpeg-compatible](https://trac.ffmpeg.org/wiki/Encode/H.264#Tune). Note that certain values for this field may cause the transcoder to override other fields you set in the `H264CodecSettings` message.
	Profile *string `pulumi:"profile"`
	// Specify the mode. The default is `vbr`. Supported rate control modes: - `vbr` - variable bitrate - `crf` - constant rate factor
	RateControlMode *string `pulumi:"rateControlMode"`
	// Enforces the specified codec tune. The available options are [FFmpeg-compatible](https://trac.ffmpeg.org/wiki/Encode/H.264#Tune). Note that certain values for this field may cause the transcoder to override other fields you set in the `H264CodecSettings` message.
	Tune *string `pulumi:"tune"`
	// Initial fullness of the Video Buffering Verifier (VBV) buffer in bits. Must be greater than zero. The default is equal to 90% of H264CodecSettings.vbv_size_bits.
	VbvFullnessBits *int `pulumi:"vbvFullnessBits"`
	// Size of the Video Buffering Verifier (VBV) buffer in bits. Must be greater than zero. The default is equal to H264CodecSettings.bitrate_bps.
	VbvSizeBits *int `pulumi:"vbvSizeBits"`
	// The width of the video in pixels. Must be an even integer. When not specified, the width is adjusted to match the specified height and input aspect ratio. If both are omitted, the input width is used. For portrait videos that contain horizontal ASR and rotation metadata, provide the width, in pixels, per the horizontal ASR. The API calculates the height per the horizontal ASR. The API detects any rotation metadata and swaps the requested height and width for the output.
	WidthPixels *int `pulumi:"widthPixels"`
}

H264 codec settings.

type H264CodecSettingsArgs 

type H264CodecSettingsArgs struct {
	// Specifies whether an open Group of Pictures (GOP) structure should be allowed or not. The default is `false`.
	AllowOpenGop pulumi.BoolPtrInput `pulumi:"allowOpenGop"`
	// Specify the intensity of the adaptive quantizer (AQ). Must be between 0 and 1, where 0 disables the quantizer and 1 maximizes the quantizer. A higher value equals a lower bitrate but smoother image. The default is 0.
	AqStrength pulumi.Float64PtrInput `pulumi:"aqStrength"`
	// The number of consecutive B-frames. Must be greater than or equal to zero. Must be less than H264CodecSettings.gop_frame_count if set. The default is 0.
	BFrameCount pulumi.IntPtrInput `pulumi:"bFrameCount"`
	// Allow B-pyramid for reference frame selection. This may not be supported on all decoders. The default is `false`.
	BPyramid pulumi.BoolPtrInput `pulumi:"bPyramid"`
	// The video bitrate in bits per second. The minimum value is 1,000. The maximum value is 800,000,000.
	BitrateBps pulumi.IntInput `pulumi:"bitrateBps"`
	// Target CRF level. Must be between 10 and 36, where 10 is the highest quality and 36 is the most efficient compression. The default is 21.
	CrfLevel pulumi.IntPtrInput `pulumi:"crfLevel"`
	// Use two-pass encoding strategy to achieve better video quality. H264CodecSettings.rate_control_mode must be `vbr`. The default is `false`.
	EnableTwoPass pulumi.BoolPtrInput `pulumi:"enableTwoPass"`
	// The entropy coder to use. The default is `cabac`. Supported entropy coders: - `cavlc` - `cabac`
	EntropyCoder pulumi.StringPtrInput `pulumi:"entropyCoder"`
	// The target video frame rate in frames per second (FPS). Must be less than or equal to 120. Will default to the input frame rate if larger than the input frame rate. The API will generate an output FPS that is divisible by the input FPS, and smaller or equal to the target FPS. See [Calculating frame rate](https://cloud.google.com/transcoder/docs/concepts/frame-rate) for more information.
	FrameRate pulumi.Float64Input `pulumi:"frameRate"`
	// Select the GOP size based on the specified duration. The default is `3s`. Note that `gopDuration` must be less than or equal to [`segmentDuration`](#SegmentSettings), and [`segmentDuration`](#SegmentSettings) must be divisible by `gopDuration`.
	GopDuration pulumi.StringPtrInput `pulumi:"gopDuration"`
	// Select the GOP size based on the specified frame count. Must be greater than zero.
	GopFrameCount pulumi.IntPtrInput `pulumi:"gopFrameCount"`
	// The height of the video in pixels. Must be an even integer. When not specified, the height is adjusted to match the specified width and input aspect ratio. If both are omitted, the input height is used. For portrait videos that contain horizontal ASR and rotation metadata, provide the height, in pixels, per the horizontal ASR. The API calculates the width per the horizontal ASR. The API detects any rotation metadata and swaps the requested height and width for the output.
	HeightPixels pulumi.IntPtrInput `pulumi:"heightPixels"`
	// Pixel format to use. The default is `yuv420p`. Supported pixel formats: - `yuv420p` pixel format - `yuv422p` pixel format - `yuv444p` pixel format - `yuv420p10` 10-bit HDR pixel format - `yuv422p10` 10-bit HDR pixel format - `yuv444p10` 10-bit HDR pixel format - `yuv420p12` 12-bit HDR pixel format - `yuv422p12` 12-bit HDR pixel format - `yuv444p12` 12-bit HDR pixel format
	PixelFormat pulumi.StringPtrInput `pulumi:"pixelFormat"`
	// Enforces the specified codec preset. The default is `veryfast`. The available options are [FFmpeg-compatible](https://trac.ffmpeg.org/wiki/Encode/H.264#Preset). Note that certain values for this field may cause the transcoder to override other fields you set in the `H264CodecSettings` message.
	Preset pulumi.StringPtrInput `pulumi:"preset"`
	// Enforces the specified codec profile. The following profiles are supported: * `baseline` * `main` * `high` (default) The available options are [FFmpeg-compatible](https://trac.ffmpeg.org/wiki/Encode/H.264#Tune). Note that certain values for this field may cause the transcoder to override other fields you set in the `H264CodecSettings` message.
	Profile pulumi.StringPtrInput `pulumi:"profile"`
	// Specify the mode. The default is `vbr`. Supported rate control modes: - `vbr` - variable bitrate - `crf` - constant rate factor
	RateControlMode pulumi.StringPtrInput `pulumi:"rateControlMode"`
	// Enforces the specified codec tune. The available options are [FFmpeg-compatible](https://trac.ffmpeg.org/wiki/Encode/H.264#Tune). Note that certain values for this field may cause the transcoder to override other fields you set in the `H264CodecSettings` message.
	Tune pulumi.StringPtrInput `pulumi:"tune"`
	// Initial fullness of the Video Buffering Verifier (VBV) buffer in bits. Must be greater than zero. The default is equal to 90% of H264CodecSettings.vbv_size_bits.
	VbvFullnessBits pulumi.IntPtrInput `pulumi:"vbvFullnessBits"`
	// Size of the Video Buffering Verifier (VBV) buffer in bits. Must be greater than zero. The default is equal to H264CodecSettings.bitrate_bps.
	VbvSizeBits pulumi.IntPtrInput `pulumi:"vbvSizeBits"`
	// The width of the video in pixels. Must be an even integer. When not specified, the width is adjusted to match the specified height and input aspect ratio. If both are omitted, the input width is used. For portrait videos that contain horizontal ASR and rotation metadata, provide the width, in pixels, per the horizontal ASR. The API calculates the height per the horizontal ASR. The API detects any rotation metadata and swaps the requested height and width for the output.
	WidthPixels pulumi.IntPtrInput `pulumi:"widthPixels"`
}

H264 codec settings.

func (H264CodecSettingsArgs) ElementType 

func (H264CodecSettingsArgs) ElementType() reflect.Type

func (H264CodecSettingsArgs) ToH264CodecSettingsOutput 

func (i H264CodecSettingsArgs) ToH264CodecSettingsOutput() H264CodecSettingsOutput

func (H264CodecSettingsArgs) ToH264CodecSettingsOutputWithContext 

func (i H264CodecSettingsArgs) ToH264CodecSettingsOutputWithContext(ctx context.Context) H264CodecSettingsOutput

func (H264CodecSettingsArgs) ToH264CodecSettingsPtrOutput 

func (i H264CodecSettingsArgs) ToH264CodecSettingsPtrOutput() H264CodecSettingsPtrOutput

func (H264CodecSettingsArgs) ToH264CodecSettingsPtrOutputWithContext 

func (i H264CodecSettingsArgs) ToH264CodecSettingsPtrOutputWithContext(ctx context.Context) H264CodecSettingsPtrOutput

type H264CodecSettingsInput 

type H264CodecSettingsInput interface {
	pulumi.Input

	ToH264CodecSettingsOutput() H264CodecSettingsOutput
	ToH264CodecSettingsOutputWithContext(context.Context) H264CodecSettingsOutput
}

H264CodecSettingsInput is an input type that accepts H264CodecSettingsArgs and H264CodecSettingsOutput values. You can construct a concrete instance of `H264CodecSettingsInput` via: 

H264CodecSettingsArgs{...}

type H264CodecSettingsOutput 

type H264CodecSettingsOutput struct{ *pulumi.OutputState }

H264 codec settings.

func (H264CodecSettingsOutput) AllowOpenGop 

func (o H264CodecSettingsOutput) AllowOpenGop() pulumi.BoolPtrOutput

Specifies whether an open Group of Pictures (GOP) structure should be allowed or not. The default is `false`.

func (H264CodecSettingsOutput) AqStrength 

func (o H264CodecSettingsOutput) AqStrength() pulumi.Float64PtrOutput

Specify the intensity of the adaptive quantizer (AQ). Must be between 0 and 1, where 0 disables the quantizer and 1 maximizes the quantizer. A higher value equals a lower bitrate but smoother image. The default is 0.

func (H264CodecSettingsOutput) BFrameCount 

func (o H264CodecSettingsOutput) BFrameCount() pulumi.IntPtrOutput

The number of consecutive B-frames. Must be greater than or equal to zero. Must be less than H264CodecSettings.gop_frame_count if set. The default is 0.

func (H264CodecSettingsOutput) BPyramid 

func (o H264CodecSettingsOutput) BPyramid() pulumi.BoolPtrOutput

Allow B-pyramid for reference frame selection. This may not be supported on all decoders. The default is `false`.

func (H264CodecSettingsOutput) BitrateBps 

func (o H264CodecSettingsOutput) BitrateBps() pulumi.IntOutput

The video bitrate in bits per second. The minimum value is 1,000. The maximum value is 800,000,000.

func (H264CodecSettingsOutput) CrfLevel 

func (o H264CodecSettingsOutput) CrfLevel() pulumi.IntPtrOutput

Target CRF level. Must be between 10 and 36, where 10 is the highest quality and 36 is the most efficient compression. The default is 21.

func (H264CodecSettingsOutput) ElementType 

func (H264CodecSettingsOutput) ElementType() reflect.Type

func (H264CodecSettingsOutput) EnableTwoPass 

func (o H264CodecSettingsOutput) EnableTwoPass() pulumi.BoolPtrOutput

Use two-pass encoding strategy to achieve better video quality. H264CodecSettings.rate_control_mode must be `vbr`. The default is `false`.

func (H264CodecSettingsOutput) EntropyCoder 

func (o H264CodecSettingsOutput) EntropyCoder() pulumi.StringPtrOutput

The entropy coder to use. The default is `cabac`. Supported entropy coders: - `cavlc` - `cabac`

func (H264CodecSettingsOutput) FrameRate 

func (o H264CodecSettingsOutput) FrameRate() pulumi.Float64Output

The target video frame rate in frames per second (FPS). Must be less than or equal to 120. Will default to the input frame rate if larger than the input frame rate. The API will generate an output FPS that is divisible by the input FPS, and smaller or equal to the target FPS. See [Calculating frame rate](https://cloud.google.com/transcoder/docs/concepts/frame-rate) for more information.

func (H264CodecSettingsOutput) GopDuration 

func (o H264CodecSettingsOutput) GopDuration() pulumi.StringPtrOutput

Select the GOP size based on the specified duration. The default is `3s`. Note that `gopDuration` must be less than or equal to [`segmentDuration`](#SegmentSettings), and [`segmentDuration`](#SegmentSettings) must be divisible by `gopDuration`.

func (H264CodecSettingsOutput) GopFrameCount 

func (o H264CodecSettingsOutput) GopFrameCount() pulumi.IntPtrOutput

Select the GOP size based on the specified frame count. Must be greater than zero.

func (H264CodecSettingsOutput) HeightPixels 

func (o H264CodecSettingsOutput) HeightPixels() pulumi.IntPtrOutput

The height of the video in pixels. Must be an even integer. When not specified, the height is adjusted to match the specified width and input aspect ratio. If both are omitted, the input height is used. For portrait videos that contain horizontal ASR and rotation metadata, provide the height, in pixels, per the horizontal ASR. The API calculates the width per the horizontal ASR. The API detects any rotation metadata and swaps the requested height and width for the output.

func (H264CodecSettingsOutput) PixelFormat 

func (o H264CodecSettingsOutput) PixelFormat() pulumi.StringPtrOutput

Pixel format to use. The default is `yuv420p`. Supported pixel formats: - `yuv420p` pixel format - `yuv422p` pixel format - `yuv444p` pixel format - `yuv420p10` 10-bit HDR pixel format - `yuv422p10` 10-bit HDR pixel format - `yuv444p10` 10-bit HDR pixel format - `yuv420p12` 12-bit HDR pixel format - `yuv422p12` 12-bit HDR pixel format - `yuv444p12` 12-bit HDR pixel format

func (H264CodecSettingsOutput) Preset 

func (o H264CodecSettingsOutput) Preset() pulumi.StringPtrOutput

Enforces the specified codec preset. The default is `veryfast`. The available options are [FFmpeg-compatible](https://trac.ffmpeg.org/wiki/Encode/H.264#Preset). Note that certain values for this field may cause the transcoder to override other fields you set in the `H264CodecSettings` message.

func (H264CodecSettingsOutput) Profile 

func (o H264CodecSettingsOutput) Profile() pulumi.StringPtrOutput

Enforces the specified codec profile. The following profiles are supported: * `baseline` * `main` * `high` (default) The available options are [FFmpeg-compatible](https://trac.ffmpeg.org/wiki/Encode/H.264#Tune). Note that certain values for this field may cause the transcoder to override other fields you set in the `H264CodecSettings` message.

func (H264CodecSettingsOutput) RateControlMode 

func (o H264CodecSettingsOutput) RateControlMode() pulumi.StringPtrOutput

Specify the mode. The default is `vbr`. Supported rate control modes: - `vbr` - variable bitrate - `crf` - constant rate factor

func (H264CodecSettingsOutput) ToH264CodecSettingsOutput 

func (o H264CodecSettingsOutput) ToH264CodecSettingsOutput() H264CodecSettingsOutput

func (H264CodecSettingsOutput) ToH264CodecSettingsOutputWithContext 

func (o H264CodecSettingsOutput) ToH264CodecSettingsOutputWithContext(ctx context.Context) H264CodecSettingsOutput

func (H264CodecSettingsOutput) ToH264CodecSettingsPtrOutput 

func (o H264CodecSettingsOutput) ToH264CodecSettingsPtrOutput() H264CodecSettingsPtrOutput

func (H264CodecSettingsOutput) ToH264CodecSettingsPtrOutputWithContext 

func (o H264CodecSettingsOutput) ToH264CodecSettingsPtrOutputWithContext(ctx context.Context) H264CodecSettingsPtrOutput

func (H264CodecSettingsOutput) Tune 

func (o H264CodecSettingsOutput) Tune() pulumi.StringPtrOutput

Enforces the specified codec tune. The available options are [FFmpeg-compatible](https://trac.ffmpeg.org/wiki/Encode/H.264#Tune). Note that certain values for this field may cause the transcoder to override other fields you set in the `H264CodecSettings` message.

func (H264CodecSettingsOutput) VbvFullnessBits 

func (o H264CodecSettingsOutput) VbvFullnessBits() pulumi.IntPtrOutput

Initial fullness of the Video Buffering Verifier (VBV) buffer in bits. Must be greater than zero. The default is equal to 90% of H264CodecSettings.vbv_size_bits.

func (H264CodecSettingsOutput) VbvSizeBits 

func (o H264CodecSettingsOutput) VbvSizeBits() pulumi.IntPtrOutput

Size of the Video Buffering Verifier (VBV) buffer in bits. Must be greater than zero. The default is equal to H264CodecSettings.bitrate_bps.

func (H264CodecSettingsOutput) WidthPixels 

func (o H264CodecSettingsOutput) WidthPixels() pulumi.IntPtrOutput

The width of the video in pixels. Must be an even integer. When not specified, the width is adjusted to match the specified height and input aspect ratio. If both are omitted, the input width is used. For portrait videos that contain horizontal ASR and rotation metadata, provide the width, in pixels, per the horizontal ASR. The API calculates the height per the horizontal ASR. The API detects any rotation metadata and swaps the requested height and width for the output.

type H264CodecSettingsPtrInput 

type H264CodecSettingsPtrInput interface {
	pulumi.Input

	ToH264CodecSettingsPtrOutput() H264CodecSettingsPtrOutput
	ToH264CodecSettingsPtrOutputWithContext(context.Context) H264CodecSettingsPtrOutput
}

H264CodecSettingsPtrInput is an input type that accepts H264CodecSettingsArgs, H264CodecSettingsPtr and H264CodecSettingsPtrOutput values. You can construct a concrete instance of `H264CodecSettingsPtrInput` via: 

        H264CodecSettingsArgs{...}

or:

        nil

func H264CodecSettingsPtr 

func H264CodecSettingsPtr(v *H264CodecSettingsArgs) H264CodecSettingsPtrInput

type H264CodecSettingsPtrOutput 

type H264CodecSettingsPtrOutput struct{ *pulumi.OutputState }

func (H264CodecSettingsPtrOutput) AllowOpenGop 

func (o H264CodecSettingsPtrOutput) AllowOpenGop() pulumi.BoolPtrOutput

Specifies whether an open Group of Pictures (GOP) structure should be allowed or not. The default is `false`.

func (H264CodecSettingsPtrOutput) AqStrength 

func (o H264CodecSettingsPtrOutput) AqStrength() pulumi.Float64PtrOutput

Specify the intensity of the adaptive quantizer (AQ). Must be between 0 and 1, where 0 disables the quantizer and 1 maximizes the quantizer. A higher value equals a lower bitrate but smoother image. The default is 0.

func (H264CodecSettingsPtrOutput) BFrameCount 

func (o H264CodecSettingsPtrOutput) BFrameCount() pulumi.IntPtrOutput

The number of consecutive B-frames. Must be greater than or equal to zero. Must be less than H264CodecSettings.gop_frame_count if set. The default is 0.

func (H264CodecSettingsPtrOutput) BPyramid 

func (o H264CodecSettingsPtrOutput) BPyramid() pulumi.BoolPtrOutput

Allow B-pyramid for reference frame selection. This may not be supported on all decoders. The default is `false`.

func (H264CodecSettingsPtrOutput) BitrateBps 

func (o H264CodecSettingsPtrOutput) BitrateBps() pulumi.IntPtrOutput

The video bitrate in bits per second. The minimum value is 1,000. The maximum value is 800,000,000.

func (H264CodecSettingsPtrOutput) CrfLevel 

func (o H264CodecSettingsPtrOutput) CrfLevel() pulumi.IntPtrOutput

Target CRF level. Must be between 10 and 36, where 10 is the highest quality and 36 is the most efficient compression. The default is 21.

func (H264CodecSettingsPtrOutput) Elem 

func (o H264CodecSettingsPtrOutput) Elem() H264CodecSettingsOutput

func (H264CodecSettingsPtrOutput) ElementType 

func (H264CodecSettingsPtrOutput) ElementType() reflect.Type

func (H264CodecSettingsPtrOutput) EnableTwoPass 

func (o H264CodecSettingsPtrOutput) EnableTwoPass() pulumi.BoolPtrOutput

Use two-pass encoding strategy to achieve better video quality. H264CodecSettings.rate_control_mode must be `vbr`. The default is `false`.

func (H264CodecSettingsPtrOutput) EntropyCoder 

func (o H264CodecSettingsPtrOutput) EntropyCoder() pulumi.StringPtrOutput

The entropy coder to use. The default is `cabac`. Supported entropy coders: - `cavlc` - `cabac`

func (H264CodecSettingsPtrOutput) FrameRate 

func (o H264CodecSettingsPtrOutput) FrameRate() pulumi.Float64PtrOutput

The target video frame rate in frames per second (FPS). Must be less than or equal to 120. Will default to the input frame rate if larger than the input frame rate. The API will generate an output FPS that is divisible by the input FPS, and smaller or equal to the target FPS. See [Calculating frame rate](https://cloud.google.com/transcoder/docs/concepts/frame-rate) for more information.

func (H264CodecSettingsPtrOutput) GopDuration 

func (o H264CodecSettingsPtrOutput) GopDuration() pulumi.StringPtrOutput

Select the GOP size based on the specified duration. The default is `3s`. Note that `gopDuration` must be less than or equal to [`segmentDuration`](#SegmentSettings), and [`segmentDuration`](#SegmentSettings) must be divisible by `gopDuration`.

func (H264CodecSettingsPtrOutput) GopFrameCount 

func (o H264CodecSettingsPtrOutput) GopFrameCount() pulumi.IntPtrOutput

Select the GOP size based on the specified frame count. Must be greater than zero.

func (H264CodecSettingsPtrOutput) HeightPixels 

func (o H264CodecSettingsPtrOutput) HeightPixels() pulumi.IntPtrOutput

The height of the video in pixels. Must be an even integer. When not specified, the height is adjusted to match the specified width and input aspect ratio. If both are omitted, the input height is used. For portrait videos that contain horizontal ASR and rotation metadata, provide the height, in pixels, per the horizontal ASR. The API calculates the width per the horizontal ASR. The API detects any rotation metadata and swaps the requested height and width for the output.

func (H264CodecSettingsPtrOutput) PixelFormat 

func (o H264CodecSettingsPtrOutput) PixelFormat() pulumi.StringPtrOutput

Pixel format to use. The default is `yuv420p`. Supported pixel formats: - `yuv420p` pixel format - `yuv422p` pixel format - `yuv444p` pixel format - `yuv420p10` 10-bit HDR pixel format - `yuv422p10` 10-bit HDR pixel format - `yuv444p10` 10-bit HDR pixel format - `yuv420p12` 12-bit HDR pixel format - `yuv422p12` 12-bit HDR pixel format - `yuv444p12` 12-bit HDR pixel format

func (H264CodecSettingsPtrOutput) Preset 

func (o H264CodecSettingsPtrOutput) Preset() pulumi.StringPtrOutput

Enforces the specified codec preset. The default is `veryfast`. The available options are [FFmpeg-compatible](https://trac.ffmpeg.org/wiki/Encode/H.264#Preset). Note that certain values for this field may cause the transcoder to override other fields you set in the `H264CodecSettings` message.

func (H264CodecSettingsPtrOutput) Profile 

func (o H264CodecSettingsPtrOutput) Profile() pulumi.StringPtrOutput

Enforces the specified codec profile. The following profiles are supported: * `baseline` * `main` * `high` (default) The available options are [FFmpeg-compatible](https://trac.ffmpeg.org/wiki/Encode/H.264#Tune). Note that certain values for this field may cause the transcoder to override other fields you set in the `H264CodecSettings` message.

func (H264CodecSettingsPtrOutput) RateControlMode 

func (o H264CodecSettingsPtrOutput) RateControlMode() pulumi.StringPtrOutput

Specify the mode. The default is `vbr`. Supported rate control modes: - `vbr` - variable bitrate - `crf` - constant rate factor

func (H264CodecSettingsPtrOutput) ToH264CodecSettingsPtrOutput 

func (o H264CodecSettingsPtrOutput) ToH264CodecSettingsPtrOutput() H264CodecSettingsPtrOutput

func (H264CodecSettingsPtrOutput) ToH264CodecSettingsPtrOutputWithContext 

func (o H264CodecSettingsPtrOutput) ToH264CodecSettingsPtrOutputWithContext(ctx context.Context) H264CodecSettingsPtrOutput

func (H264CodecSettingsPtrOutput) Tune 

func (o H264CodecSettingsPtrOutput) Tune() pulumi.StringPtrOutput

Enforces the specified codec tune. The available options are [FFmpeg-compatible](https://trac.ffmpeg.org/wiki/Encode/H.264#Tune). Note that certain values for this field may cause the transcoder to override other fields you set in the `H264CodecSettings` message.

func (H264CodecSettingsPtrOutput) VbvFullnessBits 

func (o H264CodecSettingsPtrOutput) VbvFullnessBits() pulumi.IntPtrOutput

Initial fullness of the Video Buffering Verifier (VBV) buffer in bits. Must be greater than zero. The default is equal to 90% of H264CodecSettings.vbv_size_bits.

func (H264CodecSettingsPtrOutput) VbvSizeBits 

func (o H264CodecSettingsPtrOutput) VbvSizeBits() pulumi.IntPtrOutput

Size of the Video Buffering Verifier (VBV) buffer in bits. Must be greater than zero. The default is equal to H264CodecSettings.bitrate_bps.

func (H264CodecSettingsPtrOutput) WidthPixels 

func (o H264CodecSettingsPtrOutput) WidthPixels() pulumi.IntPtrOutput

The width of the video in pixels. Must be an even integer. When not specified, the width is adjusted to match the specified height and input aspect ratio. If both are omitted, the input width is used. For portrait videos that contain horizontal ASR and rotation metadata, provide the width, in pixels, per the horizontal ASR. The API calculates the height per the horizontal ASR. The API detects any rotation metadata and swaps the requested height and width for the output.

type H264CodecSettingsResponse 

type H264CodecSettingsResponse struct {
	// Specifies whether an open Group of Pictures (GOP) structure should be allowed or not. The default is `false`.
	AllowOpenGop bool `pulumi:"allowOpenGop"`
	// Specify the intensity of the adaptive quantizer (AQ). Must be between 0 and 1, where 0 disables the quantizer and 1 maximizes the quantizer. A higher value equals a lower bitrate but smoother image. The default is 0.
	AqStrength float64 `pulumi:"aqStrength"`
	// The number of consecutive B-frames. Must be greater than or equal to zero. Must be less than H264CodecSettings.gop_frame_count if set. The default is 0.
	BFrameCount int `pulumi:"bFrameCount"`
	// Allow B-pyramid for reference frame selection. This may not be supported on all decoders. The default is `false`.
	BPyramid bool `pulumi:"bPyramid"`
	// The video bitrate in bits per second. The minimum value is 1,000. The maximum value is 800,000,000.
	BitrateBps int `pulumi:"bitrateBps"`
	// Target CRF level. Must be between 10 and 36, where 10 is the highest quality and 36 is the most efficient compression. The default is 21.
	CrfLevel int `pulumi:"crfLevel"`
	// Use two-pass encoding strategy to achieve better video quality. H264CodecSettings.rate_control_mode must be `vbr`. The default is `false`.
	EnableTwoPass bool `pulumi:"enableTwoPass"`
	// The entropy coder to use. The default is `cabac`. Supported entropy coders: - `cavlc` - `cabac`
	EntropyCoder string `pulumi:"entropyCoder"`
	// The target video frame rate in frames per second (FPS). Must be less than or equal to 120. Will default to the input frame rate if larger than the input frame rate. The API will generate an output FPS that is divisible by the input FPS, and smaller or equal to the target FPS. See [Calculating frame rate](https://cloud.google.com/transcoder/docs/concepts/frame-rate) for more information.
	FrameRate float64 `pulumi:"frameRate"`
	// Select the GOP size based on the specified duration. The default is `3s`. Note that `gopDuration` must be less than or equal to [`segmentDuration`](#SegmentSettings), and [`segmentDuration`](#SegmentSettings) must be divisible by `gopDuration`.
	GopDuration string `pulumi:"gopDuration"`
	// Select the GOP size based on the specified frame count. Must be greater than zero.
	GopFrameCount int `pulumi:"gopFrameCount"`
	// The height of the video in pixels. Must be an even integer. When not specified, the height is adjusted to match the specified width and input aspect ratio. If both are omitted, the input height is used. For portrait videos that contain horizontal ASR and rotation metadata, provide the height, in pixels, per the horizontal ASR. The API calculates the width per the horizontal ASR. The API detects any rotation metadata and swaps the requested height and width for the output.
	HeightPixels int `pulumi:"heightPixels"`
	// Pixel format to use. The default is `yuv420p`. Supported pixel formats: - `yuv420p` pixel format - `yuv422p` pixel format - `yuv444p` pixel format - `yuv420p10` 10-bit HDR pixel format - `yuv422p10` 10-bit HDR pixel format - `yuv444p10` 10-bit HDR pixel format - `yuv420p12` 12-bit HDR pixel format - `yuv422p12` 12-bit HDR pixel format - `yuv444p12` 12-bit HDR pixel format
	PixelFormat string `pulumi:"pixelFormat"`
	// Enforces the specified codec preset. The default is `veryfast`. The available options are [FFmpeg-compatible](https://trac.ffmpeg.org/wiki/Encode/H.264#Preset). Note that certain values for this field may cause the transcoder to override other fields you set in the `H264CodecSettings` message.
	Preset string `pulumi:"preset"`
	// Enforces the specified codec profile. The following profiles are supported: * `baseline` * `main` * `high` (default) The available options are [FFmpeg-compatible](https://trac.ffmpeg.org/wiki/Encode/H.264#Tune). Note that certain values for this field may cause the transcoder to override other fields you set in the `H264CodecSettings` message.
	Profile string `pulumi:"profile"`
	// Specify the mode. The default is `vbr`. Supported rate control modes: - `vbr` - variable bitrate - `crf` - constant rate factor
	RateControlMode string `pulumi:"rateControlMode"`
	// Enforces the specified codec tune. The available options are [FFmpeg-compatible](https://trac.ffmpeg.org/wiki/Encode/H.264#Tune). Note that certain values for this field may cause the transcoder to override other fields you set in the `H264CodecSettings` message.
	Tune string `pulumi:"tune"`
	// Initial fullness of the Video Buffering Verifier (VBV) buffer in bits. Must be greater than zero. The default is equal to 90% of H264CodecSettings.vbv_size_bits.
	VbvFullnessBits int `pulumi:"vbvFullnessBits"`
	// Size of the Video Buffering Verifier (VBV) buffer in bits. Must be greater than zero. The default is equal to H264CodecSettings.bitrate_bps.
	VbvSizeBits int `pulumi:"vbvSizeBits"`
	// The width of the video in pixels. Must be an even integer. When not specified, the width is adjusted to match the specified height and input aspect ratio. If both are omitted, the input width is used. For portrait videos that contain horizontal ASR and rotation metadata, provide the width, in pixels, per the horizontal ASR. The API calculates the height per the horizontal ASR. The API detects any rotation metadata and swaps the requested height and width for the output.
	WidthPixels int `pulumi:"widthPixels"`
}

H264 codec settings.

type H264CodecSettingsResponseOutput 

type H264CodecSettingsResponseOutput struct{ *pulumi.OutputState }

H264 codec settings.

func (H264CodecSettingsResponseOutput) AllowOpenGop 

func (o H264CodecSettingsResponseOutput) AllowOpenGop() pulumi.BoolOutput

Specifies whether an open Group of Pictures (GOP) structure should be allowed or not. The default is `false`.

func (H264CodecSettingsResponseOutput) AqStrength 

func (o H264CodecSettingsResponseOutput) AqStrength() pulumi.Float64Output

Specify the intensity of the adaptive quantizer (AQ). Must be between 0 and 1, where 0 disables the quantizer and 1 maximizes the quantizer. A higher value equals a lower bitrate but smoother image. The default is 0.

func (H264CodecSettingsResponseOutput) BFrameCount 

func (o H264CodecSettingsResponseOutput) BFrameCount() pulumi.IntOutput

The number of consecutive B-frames. Must be greater than or equal to zero. Must be less than H264CodecSettings.gop_frame_count if set. The default is 0.

func (H264CodecSettingsResponseOutput) BPyramid 

func (o H264CodecSettingsResponseOutput) BPyramid() pulumi.BoolOutput

Allow B-pyramid for reference frame selection. This may not be supported on all decoders. The default is `false`.

func (H264CodecSettingsResponseOutput) BitrateBps 

func (o H264CodecSettingsResponseOutput) BitrateBps() pulumi.IntOutput

The video bitrate in bits per second. The minimum value is 1,000. The maximum value is 800,000,000.

func (H264CodecSettingsResponseOutput) CrfLevel 

func (o H264CodecSettingsResponseOutput) CrfLevel() pulumi.IntOutput

Target CRF level. Must be between 10 and 36, where 10 is the highest quality and 36 is the most efficient compression. The default is 21.

func (H264CodecSettingsResponseOutput) ElementType 

func (H264CodecSettingsResponseOutput) ElementType() reflect.Type

func (H264CodecSettingsResponseOutput) EnableTwoPass 

func (o H264CodecSettingsResponseOutput) EnableTwoPass() pulumi.BoolOutput

Use two-pass encoding strategy to achieve better video quality. H264CodecSettings.rate_control_mode must be `vbr`. The default is `false`.

func (H264CodecSettingsResponseOutput) EntropyCoder 

func (o H264CodecSettingsResponseOutput) EntropyCoder() pulumi.StringOutput

The entropy coder to use. The default is `cabac`. Supported entropy coders: - `cavlc` - `cabac`

func (H264CodecSettingsResponseOutput) FrameRate 

func (o H264CodecSettingsResponseOutput) FrameRate() pulumi.Float64Output

The target video frame rate in frames per second (FPS). Must be less than or equal to 120. Will default to the input frame rate if larger than the input frame rate. The API will generate an output FPS that is divisible by the input FPS, and smaller or equal to the target FPS. See [Calculating frame rate](https://cloud.google.com/transcoder/docs/concepts/frame-rate) for more information.

func (H264CodecSettingsResponseOutput) GopDuration 

func (o H264CodecSettingsResponseOutput) GopDuration() pulumi.StringOutput

Select the GOP size based on the specified duration. The default is `3s`. Note that `gopDuration` must be less than or equal to [`segmentDuration`](#SegmentSettings), and [`segmentDuration`](#SegmentSettings) must be divisible by `gopDuration`.

func (H264CodecSettingsResponseOutput) GopFrameCount 

func (o H264CodecSettingsResponseOutput) GopFrameCount() pulumi.IntOutput

Select the GOP size based on the specified frame count. Must be greater than zero.

func (H264CodecSettingsResponseOutput) HeightPixels 

func (o H264CodecSettingsResponseOutput) HeightPixels() pulumi.IntOutput

The height of the video in pixels. Must be an even integer. When not specified, the height is adjusted to match the specified width and input aspect ratio. If both are omitted, the input height is used. For portrait videos that contain horizontal ASR and rotation metadata, provide the height, in pixels, per the horizontal ASR. The API calculates the width per the horizontal ASR. The API detects any rotation metadata and swaps the requested height and width for the output.

func (H264CodecSettingsResponseOutput) PixelFormat 

func (o H264CodecSettingsResponseOutput) PixelFormat() pulumi.StringOutput

Pixel format to use. The default is `yuv420p`. Supported pixel formats: - `yuv420p` pixel format - `yuv422p` pixel format - `yuv444p` pixel format - `yuv420p10` 10-bit HDR pixel format - `yuv422p10` 10-bit HDR pixel format - `yuv444p10` 10-bit HDR pixel format - `yuv420p12` 12-bit HDR pixel format - `yuv422p12` 12-bit HDR pixel format - `yuv444p12` 12-bit HDR pixel format

func (H264CodecSettingsResponseOutput) Preset 

func (o H264CodecSettingsResponseOutput) Preset() pulumi.StringOutput

Enforces the specified codec preset. The default is `veryfast`. The available options are [FFmpeg-compatible](https://trac.ffmpeg.org/wiki/Encode/H.264#Preset). Note that certain values for this field may cause the transcoder to override other fields you set in the `H264CodecSettings` message.

func (H264CodecSettingsResponseOutput) Profile 

func (o H264CodecSettingsResponseOutput) Profile() pulumi.StringOutput

Enforces the specified codec profile. The following profiles are supported: * `baseline` * `main` * `high` (default) The available options are [FFmpeg-compatible](https://trac.ffmpeg.org/wiki/Encode/H.264#Tune). Note that certain values for this field may cause the transcoder to override other fields you set in the `H264CodecSettings` message.

func (H264CodecSettingsResponseOutput) RateControlMode 

func (o H264CodecSettingsResponseOutput) RateControlMode() pulumi.StringOutput

Specify the mode. The default is `vbr`. Supported rate control modes: - `vbr` - variable bitrate - `crf` - constant rate factor

func (H264CodecSettingsResponseOutput) ToH264CodecSettingsResponseOutput 

func (o H264CodecSettingsResponseOutput) ToH264CodecSettingsResponseOutput() H264CodecSettingsResponseOutput

func (H264CodecSettingsResponseOutput) ToH264CodecSettingsResponseOutputWithContext 

func (o H264CodecSettingsResponseOutput) ToH264CodecSettingsResponseOutputWithContext(ctx context.Context) H264CodecSettingsResponseOutput

func (H264CodecSettingsResponseOutput) Tune 

func (o H264CodecSettingsResponseOutput) Tune() pulumi.StringOutput

Enforces the specified codec tune. The available options are [FFmpeg-compatible](https://trac.ffmpeg.org/wiki/Encode/H.264#Tune). Note that certain values for this field may cause the transcoder to override other fields you set in the `H264CodecSettings` message.

func (H264CodecSettingsResponseOutput) VbvFullnessBits 

func (o H264CodecSettingsResponseOutput) VbvFullnessBits() pulumi.IntOutput

Initial fullness of the Video Buffering Verifier (VBV) buffer in bits. Must be greater than zero. The default is equal to 90% of H264CodecSettings.vbv_size_bits.

func (H264CodecSettingsResponseOutput) VbvSizeBits 

func (o H264CodecSettingsResponseOutput) VbvSizeBits() pulumi.IntOutput

Size of the Video Buffering Verifier (VBV) buffer in bits. Must be greater than zero. The default is equal to H264CodecSettings.bitrate_bps.

func (H264CodecSettingsResponseOutput) WidthPixels 

func (o H264CodecSettingsResponseOutput) WidthPixels() pulumi.IntOutput

The width of the video in pixels. Must be an even integer. When not specified, the width is adjusted to match the specified height and input aspect ratio. If both are omitted, the input width is used. For portrait videos that contain horizontal ASR and rotation metadata, provide the width, in pixels, per the horizontal ASR. The API calculates the height per the horizontal ASR. The API detects any rotation metadata and swaps the requested height and width for the output.

type H265CodecSettings 

type H265CodecSettings struct {
	// Specifies whether an open Group of Pictures (GOP) structure should be allowed or not. The default is `false`.
	AllowOpenGop *bool `pulumi:"allowOpenGop"`
	// Specify the intensity of the adaptive quantizer (AQ). Must be between 0 and 1, where 0 disables the quantizer and 1 maximizes the quantizer. A higher value equals a lower bitrate but smoother image. The default is 0.
	AqStrength *float64 `pulumi:"aqStrength"`
	// The number of consecutive B-frames. Must be greater than or equal to zero. Must be less than H265CodecSettings.gop_frame_count if set. The default is 0.
	BFrameCount *int `pulumi:"bFrameCount"`
	// Allow B-pyramid for reference frame selection. This may not be supported on all decoders. The default is `false`.
	BPyramid *bool `pulumi:"bPyramid"`
	// The video bitrate in bits per second. The minimum value is 1,000. The maximum value is 800,000,000.
	BitrateBps int `pulumi:"bitrateBps"`
	// Target CRF level. Must be between 10 and 36, where 10 is the highest quality and 36 is the most efficient compression. The default is 21.
	CrfLevel *int `pulumi:"crfLevel"`
	// Use two-pass encoding strategy to achieve better video quality. H265CodecSettings.rate_control_mode must be `vbr`. The default is `false`.
	EnableTwoPass *bool `pulumi:"enableTwoPass"`
	// The target video frame rate in frames per second (FPS). Must be less than or equal to 120. Will default to the input frame rate if larger than the input frame rate. The API will generate an output FPS that is divisible by the input FPS, and smaller or equal to the target FPS. See [Calculating frame rate](https://cloud.google.com/transcoder/docs/concepts/frame-rate) for more information.
	FrameRate float64 `pulumi:"frameRate"`
	// Select the GOP size based on the specified duration. The default is `3s`. Note that `gopDuration` must be less than or equal to [`segmentDuration`](#SegmentSettings), and [`segmentDuration`](#SegmentSettings) must be divisible by `gopDuration`.
	GopDuration *string `pulumi:"gopDuration"`
	// Select the GOP size based on the specified frame count. Must be greater than zero.
	GopFrameCount *int `pulumi:"gopFrameCount"`
	// The height of the video in pixels. Must be an even integer. When not specified, the height is adjusted to match the specified width and input aspect ratio. If both are omitted, the input height is used. For portrait videos that contain horizontal ASR and rotation metadata, provide the height, in pixels, per the horizontal ASR. The API calculates the width per the horizontal ASR. The API detects any rotation metadata and swaps the requested height and width for the output.
	HeightPixels *int `pulumi:"heightPixels"`
	// Pixel format to use. The default is `yuv420p`. Supported pixel formats: - `yuv420p` pixel format - `yuv422p` pixel format - `yuv444p` pixel format - `yuv420p10` 10-bit HDR pixel format - `yuv422p10` 10-bit HDR pixel format - `yuv444p10` 10-bit HDR pixel format - `yuv420p12` 12-bit HDR pixel format - `yuv422p12` 12-bit HDR pixel format - `yuv444p12` 12-bit HDR pixel format
	PixelFormat *string `pulumi:"pixelFormat"`
	// Enforces the specified codec preset. The default is `veryfast`. The available options are [FFmpeg-compatible](https://trac.ffmpeg.org/wiki/Encode/H.265). Note that certain values for this field may cause the transcoder to override other fields you set in the `H265CodecSettings` message.
	Preset *string `pulumi:"preset"`
	// Enforces the specified codec profile. The following profiles are supported: * 8-bit profiles * `main` (default) * `main-intra` * `mainstillpicture` * 10-bit profiles * `main10` (default) * `main10-intra` * `main422-10` * `main422-10-intra` * `main444-10` * `main444-10-intra` * 12-bit profiles * `main12` (default) * `main12-intra` * `main422-12` * `main422-12-intra` * `main444-12` * `main444-12-intra` The available options are [FFmpeg-compatible](https://x265.readthedocs.io/). Note that certain values for this field may cause the transcoder to override other fields you set in the `H265CodecSettings` message.
	Profile *string `pulumi:"profile"`
	// Specify the mode. The default is `vbr`. Supported rate control modes: - `vbr` - variable bitrate - `crf` - constant rate factor
	RateControlMode *string `pulumi:"rateControlMode"`
	// Enforces the specified codec tune. The available options are [FFmpeg-compatible](https://trac.ffmpeg.org/wiki/Encode/H.265). Note that certain values for this field may cause the transcoder to override other fields you set in the `H265CodecSettings` message.
	Tune *string `pulumi:"tune"`
	// Initial fullness of the Video Buffering Verifier (VBV) buffer in bits. Must be greater than zero. The default is equal to 90% of H265CodecSettings.vbv_size_bits.
	VbvFullnessBits *int `pulumi:"vbvFullnessBits"`
	// Size of the Video Buffering Verifier (VBV) buffer in bits. Must be greater than zero. The default is equal to `VideoStream.bitrate_bps`.
	VbvSizeBits *int `pulumi:"vbvSizeBits"`
	// The width of the video in pixels. Must be an even integer. When not specified, the width is adjusted to match the specified height and input aspect ratio. If both are omitted, the input width is used. For portrait videos that contain horizontal ASR and rotation metadata, provide the width, in pixels, per the horizontal ASR. The API calculates the height per the horizontal ASR. The API detects any rotation metadata and swaps the requested height and width for the output.
	WidthPixels *int `pulumi:"widthPixels"`
}

H265 codec settings.

type H265CodecSettingsArgs 

type H265CodecSettingsArgs struct {
	// Specifies whether an open Group of Pictures (GOP) structure should be allowed or not. The default is `false`.
	AllowOpenGop pulumi.BoolPtrInput `pulumi:"allowOpenGop"`
	// Specify the intensity of the adaptive quantizer (AQ). Must be between 0 and 1, where 0 disables the quantizer and 1 maximizes the quantizer. A higher value equals a lower bitrate but smoother image. The default is 0.
	AqStrength pulumi.Float64PtrInput `pulumi:"aqStrength"`
	// The number of consecutive B-frames. Must be greater than or equal to zero. Must be less than H265CodecSettings.gop_frame_count if set. The default is 0.
	BFrameCount pulumi.IntPtrInput `pulumi:"bFrameCount"`
	// Allow B-pyramid for reference frame selection. This may not be supported on all decoders. The default is `false`.
	BPyramid pulumi.BoolPtrInput `pulumi:"bPyramid"`
	// The video bitrate in bits per second. The minimum value is 1,000. The maximum value is 800,000,000.
	BitrateBps pulumi.IntInput `pulumi:"bitrateBps"`
	// Target CRF level. Must be between 10 and 36, where 10 is the highest quality and 36 is the most efficient compression. The default is 21.
	CrfLevel pulumi.IntPtrInput `pulumi:"crfLevel"`
	// Use two-pass encoding strategy to achieve better video quality. H265CodecSettings.rate_control_mode must be `vbr`. The default is `false`.
	EnableTwoPass pulumi.BoolPtrInput `pulumi:"enableTwoPass"`
	// The target video frame rate in frames per second (FPS). Must be less than or equal to 120. Will default to the input frame rate if larger than the input frame rate. The API will generate an output FPS that is divisible by the input FPS, and smaller or equal to the target FPS. See [Calculating frame rate](https://cloud.google.com/transcoder/docs/concepts/frame-rate) for more information.
	FrameRate pulumi.Float64Input `pulumi:"frameRate"`
	// Select the GOP size based on the specified duration. The default is `3s`. Note that `gopDuration` must be less than or equal to [`segmentDuration`](#SegmentSettings), and [`segmentDuration`](#SegmentSettings) must be divisible by `gopDuration`.
	GopDuration pulumi.StringPtrInput `pulumi:"gopDuration"`
	// Select the GOP size based on the specified frame count. Must be greater than zero.
	GopFrameCount pulumi.IntPtrInput `pulumi:"gopFrameCount"`
	// The height of the video in pixels. Must be an even integer. When not specified, the height is adjusted to match the specified width and input aspect ratio. If both are omitted, the input height is used. For portrait videos that contain horizontal ASR and rotation metadata, provide the height, in pixels, per the horizontal ASR. The API calculates the width per the horizontal ASR. The API detects any rotation metadata and swaps the requested height and width for the output.
	HeightPixels pulumi.IntPtrInput `pulumi:"heightPixels"`
	// Pixel format to use. The default is `yuv420p`. Supported pixel formats: - `yuv420p` pixel format - `yuv422p` pixel format - `yuv444p` pixel format - `yuv420p10` 10-bit HDR pixel format - `yuv422p10` 10-bit HDR pixel format - `yuv444p10` 10-bit HDR pixel format - `yuv420p12` 12-bit HDR pixel format - `yuv422p12` 12-bit HDR pixel format - `yuv444p12` 12-bit HDR pixel format
	PixelFormat pulumi.StringPtrInput `pulumi:"pixelFormat"`
	// Enforces the specified codec preset. The default is `veryfast`. The available options are [FFmpeg-compatible](https://trac.ffmpeg.org/wiki/Encode/H.265). Note that certain values for this field may cause the transcoder to override other fields you set in the `H265CodecSettings` message.
	Preset pulumi.StringPtrInput `pulumi:"preset"`
	// Enforces the specified codec profile. The following profiles are supported: * 8-bit profiles * `main` (default) * `main-intra` * `mainstillpicture` * 10-bit profiles * `main10` (default) * `main10-intra` * `main422-10` * `main422-10-intra` * `main444-10` * `main444-10-intra` * 12-bit profiles * `main12` (default) * `main12-intra` * `main422-12` * `main422-12-intra` * `main444-12` * `main444-12-intra` The available options are [FFmpeg-compatible](https://x265.readthedocs.io/). Note that certain values for this field may cause the transcoder to override other fields you set in the `H265CodecSettings` message.
	Profile pulumi.StringPtrInput `pulumi:"profile"`
	// Specify the mode. The default is `vbr`. Supported rate control modes: - `vbr` - variable bitrate - `crf` - constant rate factor
	RateControlMode pulumi.StringPtrInput `pulumi:"rateControlMode"`
	// Enforces the specified codec tune. The available options are [FFmpeg-compatible](https://trac.ffmpeg.org/wiki/Encode/H.265). Note that certain values for this field may cause the transcoder to override other fields you set in the `H265CodecSettings` message.
	Tune pulumi.StringPtrInput `pulumi:"tune"`
	// Initial fullness of the Video Buffering Verifier (VBV) buffer in bits. Must be greater than zero. The default is equal to 90% of H265CodecSettings.vbv_size_bits.
	VbvFullnessBits pulumi.IntPtrInput `pulumi:"vbvFullnessBits"`
	// Size of the Video Buffering Verifier (VBV) buffer in bits. Must be greater than zero. The default is equal to `VideoStream.bitrate_bps`.
	VbvSizeBits pulumi.IntPtrInput `pulumi:"vbvSizeBits"`
	// The width of the video in pixels. Must be an even integer. When not specified, the width is adjusted to match the specified height and input aspect ratio. If both are omitted, the input width is used. For portrait videos that contain horizontal ASR and rotation metadata, provide the width, in pixels, per the horizontal ASR. The API calculates the height per the horizontal ASR. The API detects any rotation metadata and swaps the requested height and width for the output.
	WidthPixels pulumi.IntPtrInput `pulumi:"widthPixels"`
}

H265 codec settings.

func (H265CodecSettingsArgs) ElementType 

func (H265CodecSettingsArgs) ElementType() reflect.Type

func (H265CodecSettingsArgs) ToH265CodecSettingsOutput 

func (i H265CodecSettingsArgs) ToH265CodecSettingsOutput() H265CodecSettingsOutput

func (H265CodecSettingsArgs) ToH265CodecSettingsOutputWithContext 

func (i H265CodecSettingsArgs) ToH265CodecSettingsOutputWithContext(ctx context.Context) H265CodecSettingsOutput

func (H265CodecSettingsArgs) ToH265CodecSettingsPtrOutput 

func (i H265CodecSettingsArgs) ToH265CodecSettingsPtrOutput() H265CodecSettingsPtrOutput

func (H265CodecSettingsArgs) ToH265CodecSettingsPtrOutputWithContext 

func (i H265CodecSettingsArgs) ToH265CodecSettingsPtrOutputWithContext(ctx context.Context) H265CodecSettingsPtrOutput

type H265CodecSettingsInput 

type H265CodecSettingsInput interface {
	pulumi.Input

	ToH265CodecSettingsOutput() H265CodecSettingsOutput
	ToH265CodecSettingsOutputWithContext(context.Context) H265CodecSettingsOutput
}

H265CodecSettingsInput is an input type that accepts H265CodecSettingsArgs and H265CodecSettingsOutput values. You can construct a concrete instance of `H265CodecSettingsInput` via: 

H265CodecSettingsArgs{...}

type H265CodecSettingsOutput 

type H265CodecSettingsOutput struct{ *pulumi.OutputState }

H265 codec settings.

func (H265CodecSettingsOutput) AllowOpenGop 

func (o H265CodecSettingsOutput) AllowOpenGop() pulumi.BoolPtrOutput

Specifies whether an open Group of Pictures (GOP) structure should be allowed or not. The default is `false`.

func (H265CodecSettingsOutput) AqStrength 

func (o H265CodecSettingsOutput) AqStrength() pulumi.Float64PtrOutput

Specify the intensity of the adaptive quantizer (AQ). Must be between 0 and 1, where 0 disables the quantizer and 1 maximizes the quantizer. A higher value equals a lower bitrate but smoother image. The default is 0.

func (H265CodecSettingsOutput) BFrameCount 

func (o H265CodecSettingsOutput) BFrameCount() pulumi.IntPtrOutput

The number of consecutive B-frames. Must be greater than or equal to zero. Must be less than H265CodecSettings.gop_frame_count if set. The default is 0.

func (H265CodecSettingsOutput) BPyramid 

func (o H265CodecSettingsOutput) BPyramid() pulumi.BoolPtrOutput

Allow B-pyramid for reference frame selection. This may not be supported on all decoders. The default is `false`.

func (H265CodecSettingsOutput) BitrateBps 

func (o H265CodecSettingsOutput) BitrateBps() pulumi.IntOutput

The video bitrate in bits per second. The minimum value is 1,000. The maximum value is 800,000,000.

func (H265CodecSettingsOutput) CrfLevel 

func (o H265CodecSettingsOutput) CrfLevel() pulumi.IntPtrOutput

Target CRF level. Must be between 10 and 36, where 10 is the highest quality and 36 is the most efficient compression. The default is 21.

func (H265CodecSettingsOutput) ElementType 

func (H265CodecSettingsOutput) ElementType() reflect.Type

func (H265CodecSettingsOutput) EnableTwoPass 

func (o H265CodecSettingsOutput) EnableTwoPass() pulumi.BoolPtrOutput

Use two-pass encoding strategy to achieve better video quality. H265CodecSettings.rate_control_mode must be `vbr`. The default is `false`.

func (H265CodecSettingsOutput) FrameRate 

func (o H265CodecSettingsOutput) FrameRate() pulumi.Float64Output

The target video frame rate in frames per second (FPS). Must be less than or equal to 120. Will default to the input frame rate if larger than the input frame rate. The API will generate an output FPS that is divisible by the input FPS, and smaller or equal to the target FPS. See [Calculating frame rate](https://cloud.google.com/transcoder/docs/concepts/frame-rate) for more information.

func (H265CodecSettingsOutput) GopDuration 

func (o H265CodecSettingsOutput) GopDuration() pulumi.StringPtrOutput

Select the GOP size based on the specified duration. The default is `3s`. Note that `gopDuration` must be less than or equal to [`segmentDuration`](#SegmentSettings), and [`segmentDuration`](#SegmentSettings) must be divisible by `gopDuration`.

func (H265CodecSettingsOutput) GopFrameCount 

func (o H265CodecSettingsOutput) GopFrameCount() pulumi.IntPtrOutput

Select the GOP size based on the specified frame count. Must be greater than zero.

func (H265CodecSettingsOutput) HeightPixels 

func (o H265CodecSettingsOutput) HeightPixels() pulumi.IntPtrOutput

The height of the video in pixels. Must be an even integer. When not specified, the height is adjusted to match the specified width and input aspect ratio. If both are omitted, the input height is used. For portrait videos that contain horizontal ASR and rotation metadata, provide the height, in pixels, per the horizontal ASR. The API calculates the width per the horizontal ASR. The API detects any rotation metadata and swaps the requested height and width for the output.

func (H265CodecSettingsOutput) PixelFormat 

func (o H265CodecSettingsOutput) PixelFormat() pulumi.StringPtrOutput

Pixel format to use. The default is `yuv420p`. Supported pixel formats: - `yuv420p` pixel format - `yuv422p` pixel format - `yuv444p` pixel format - `yuv420p10` 10-bit HDR pixel format - `yuv422p10` 10-bit HDR pixel format - `yuv444p10` 10-bit HDR pixel format - `yuv420p12` 12-bit HDR pixel format - `yuv422p12` 12-bit HDR pixel format - `yuv444p12` 12-bit HDR pixel format

func (H265CodecSettingsOutput) Preset 

func (o H265CodecSettingsOutput) Preset() pulumi.StringPtrOutput

Enforces the specified codec preset. The default is `veryfast`. The available options are [FFmpeg-compatible](https://trac.ffmpeg.org/wiki/Encode/H.265). Note that certain values for this field may cause the transcoder to override other fields you set in the `H265CodecSettings` message.

func (H265CodecSettingsOutput) Profile 

func (o H265CodecSettingsOutput) Profile() pulumi.StringPtrOutput

Enforces the specified codec profile. The following profiles are supported: * 8-bit profiles * `main` (default) * `main-intra` * `mainstillpicture` * 10-bit profiles * `main10` (default) * `main10-intra` * `main422-10` * `main422-10-intra` * `main444-10` * `main444-10-intra` * 12-bit profiles * `main12` (default) * `main12-intra` * `main422-12` * `main422-12-intra` * `main444-12` * `main444-12-intra` The available options are [FFmpeg-compatible](https://x265.readthedocs.io/). Note that certain values for this field may cause the transcoder to override other fields you set in the `H265CodecSettings` message.

func (H265CodecSettingsOutput) RateControlMode 

func (o H265CodecSettingsOutput) RateControlMode() pulumi.StringPtrOutput

Specify the mode. The default is `vbr`. Supported rate control modes: - `vbr` - variable bitrate - `crf` - constant rate factor

func (H265CodecSettingsOutput) ToH265CodecSettingsOutput 

func (o H265CodecSettingsOutput) ToH265CodecSettingsOutput() H265CodecSettingsOutput

func (H265CodecSettingsOutput) ToH265CodecSettingsOutputWithContext 

func (o H265CodecSettingsOutput) ToH265CodecSettingsOutputWithContext(ctx context.Context) H265CodecSettingsOutput

func (H265CodecSettingsOutput) ToH265CodecSettingsPtrOutput 

func (o H265CodecSettingsOutput) ToH265CodecSettingsPtrOutput() H265CodecSettingsPtrOutput

func (H265CodecSettingsOutput) ToH265CodecSettingsPtrOutputWithContext 

func (o H265CodecSettingsOutput) ToH265CodecSettingsPtrOutputWithContext(ctx context.Context) H265CodecSettingsPtrOutput

func (H265CodecSettingsOutput) Tune 

func (o H265CodecSettingsOutput) Tune() pulumi.StringPtrOutput

Enforces the specified codec tune. The available options are [FFmpeg-compatible](https://trac.ffmpeg.org/wiki/Encode/H.265). Note that certain values for this field may cause the transcoder to override other fields you set in the `H265CodecSettings` message.

func (H265CodecSettingsOutput) VbvFullnessBits 

func (o H265CodecSettingsOutput) VbvFullnessBits() pulumi.IntPtrOutput

Initial fullness of the Video Buffering Verifier (VBV) buffer in bits. Must be greater than zero. The default is equal to 90% of H265CodecSettings.vbv_size_bits.

func (H265CodecSettingsOutput) VbvSizeBits 

func (o H265CodecSettingsOutput) VbvSizeBits() pulumi.IntPtrOutput

Size of the Video Buffering Verifier (VBV) buffer in bits. Must be greater than zero. The default is equal to `VideoStream.bitrate_bps`.

func (H265CodecSettingsOutput) WidthPixels 

func (o H265CodecSettingsOutput) WidthPixels() pulumi.IntPtrOutput

The width of the video in pixels. Must be an even integer. When not specified, the width is adjusted to match the specified height and input aspect ratio. If both are omitted, the input width is used. For portrait videos that contain horizontal ASR and rotation metadata, provide the width, in pixels, per the horizontal ASR. The API calculates the height per the horizontal ASR. The API detects any rotation metadata and swaps the requested height and width for the output.

type H265CodecSettingsPtrInput 

type H265CodecSettingsPtrInput interface {
	pulumi.Input

	ToH265CodecSettingsPtrOutput() H265CodecSettingsPtrOutput
	ToH265CodecSettingsPtrOutputWithContext(context.Context) H265CodecSettingsPtrOutput
}

H265CodecSettingsPtrInput is an input type that accepts H265CodecSettingsArgs, H265CodecSettingsPtr and H265CodecSettingsPtrOutput values. You can construct a concrete instance of `H265CodecSettingsPtrInput` via: 

        H265CodecSettingsArgs{...}

or:

        nil

func H265CodecSettingsPtr 

func H265CodecSettingsPtr(v *H265CodecSettingsArgs) H265CodecSettingsPtrInput

type H265CodecSettingsPtrOutput 

type H265CodecSettingsPtrOutput struct{ *pulumi.OutputState }

func (H265CodecSettingsPtrOutput) AllowOpenGop 

func (o H265CodecSettingsPtrOutput) AllowOpenGop() pulumi.BoolPtrOutput

Specifies whether an open Group of Pictures (GOP) structure should be allowed or not. The default is `false`.

func (H265CodecSettingsPtrOutput) AqStrength 

func (o H265CodecSettingsPtrOutput) AqStrength() pulumi.Float64PtrOutput

Specify the intensity of the adaptive quantizer (AQ). Must be between 0 and 1, where 0 disables the quantizer and 1 maximizes the quantizer. A higher value equals a lower bitrate but smoother image. The default is 0.

func (H265CodecSettingsPtrOutput) BFrameCount 

func (o H265CodecSettingsPtrOutput) BFrameCount() pulumi.IntPtrOutput

The number of consecutive B-frames. Must be greater than or equal to zero. Must be less than H265CodecSettings.gop_frame_count if set. The default is 0.

func (H265CodecSettingsPtrOutput) BPyramid 

func (o H265CodecSettingsPtrOutput) BPyramid() pulumi.BoolPtrOutput

Allow B-pyramid for reference frame selection. This may not be supported on all decoders. The default is `false`.

func (H265CodecSettingsPtrOutput) BitrateBps 

func (o H265CodecSettingsPtrOutput) BitrateBps() pulumi.IntPtrOutput

The video bitrate in bits per second. The minimum value is 1,000. The maximum value is 800,000,000.

func (H265CodecSettingsPtrOutput) CrfLevel 

func (o H265CodecSettingsPtrOutput) CrfLevel() pulumi.IntPtrOutput

Target CRF level. Must be between 10 and 36, where 10 is the highest quality and 36 is the most efficient compression. The default is 21.

func (H265CodecSettingsPtrOutput) Elem 

func (o H265CodecSettingsPtrOutput) Elem() H265CodecSettingsOutput

func (H265CodecSettingsPtrOutput) ElementType 

func (H265CodecSettingsPtrOutput) ElementType() reflect.Type

func (H265CodecSettingsPtrOutput) EnableTwoPass 

func (o H265CodecSettingsPtrOutput) EnableTwoPass() pulumi.BoolPtrOutput

Use two-pass encoding strategy to achieve better video quality. H265CodecSettings.rate_control_mode must be `vbr`. The default is `false`.

func (H265CodecSettingsPtrOutput) FrameRate 

func (o H265CodecSettingsPtrOutput) FrameRate() pulumi.Float64PtrOutput

The target video frame rate in frames per second (FPS). Must be less than or equal to 120. Will default to the input frame rate if larger than the input frame rate. The API will generate an output FPS that is divisible by the input FPS, and smaller or equal to the target FPS. See [Calculating frame rate](https://cloud.google.com/transcoder/docs/concepts/frame-rate) for more information.

func (H265CodecSettingsPtrOutput) GopDuration 

func (o H265CodecSettingsPtrOutput) GopDuration() pulumi.StringPtrOutput

Select the GOP size based on the specified duration. The default is `3s`. Note that `gopDuration` must be less than or equal to [`segmentDuration`](#SegmentSettings), and [`segmentDuration`](#SegmentSettings) must be divisible by `gopDuration`.

func (H265CodecSettingsPtrOutput) GopFrameCount 

func (o H265CodecSettingsPtrOutput) GopFrameCount() pulumi.IntPtrOutput

Select the GOP size based on the specified frame count. Must be greater than zero.

func (H265CodecSettingsPtrOutput) HeightPixels 

func (o H265CodecSettingsPtrOutput) HeightPixels() pulumi.IntPtrOutput

The height of the video in pixels. Must be an even integer. When not specified, the height is adjusted to match the specified width and input aspect ratio. If both are omitted, the input height is used. For portrait videos that contain horizontal ASR and rotation metadata, provide the height, in pixels, per the horizontal ASR. The API calculates the width per the horizontal ASR. The API detects any rotation metadata and swaps the requested height and width for the output.

func (H265CodecSettingsPtrOutput) PixelFormat 

func (o H265CodecSettingsPtrOutput) PixelFormat() pulumi.StringPtrOutput

Pixel format to use. The default is `yuv420p`. Supported pixel formats: - `yuv420p` pixel format - `yuv422p` pixel format - `yuv444p` pixel format - `yuv420p10` 10-bit HDR pixel format - `yuv422p10` 10-bit HDR pixel format - `yuv444p10` 10-bit HDR pixel format - `yuv420p12` 12-bit HDR pixel format - `yuv422p12` 12-bit HDR pixel format - `yuv444p12` 12-bit HDR pixel format

func (H265CodecSettingsPtrOutput) Preset 

func (o H265CodecSettingsPtrOutput) Preset() pulumi.StringPtrOutput

Enforces the specified codec preset. The default is `veryfast`. The available options are [FFmpeg-compatible](https://trac.ffmpeg.org/wiki/Encode/H.265). Note that certain values for this field may cause the transcoder to override other fields you set in the `H265CodecSettings` message.

func (H265CodecSettingsPtrOutput) Profile 

func (o H265CodecSettingsPtrOutput) Profile() pulumi.StringPtrOutput

Enforces the specified codec profile. The following profiles are supported: * 8-bit profiles * `main` (default) * `main-intra` * `mainstillpicture` * 10-bit profiles * `main10` (default) * `main10-intra` * `main422-10` * `main422-10-intra` * `main444-10` * `main444-10-intra` * 12-bit profiles * `main12` (default) * `main12-intra` * `main422-12` * `main422-12-intra` * `main444-12` * `main444-12-intra` The available options are [FFmpeg-compatible](https://x265.readthedocs.io/). Note that certain values for this field may cause the transcoder to override other fields you set in the `H265CodecSettings` message.

func (H265CodecSettingsPtrOutput) RateControlMode 

func (o H265CodecSettingsPtrOutput) RateControlMode() pulumi.StringPtrOutput

Specify the mode. The default is `vbr`. Supported rate control modes: - `vbr` - variable bitrate - `crf` - constant rate factor

func (H265CodecSettingsPtrOutput) ToH265CodecSettingsPtrOutput 

func (o H265CodecSettingsPtrOutput) ToH265CodecSettingsPtrOutput() H265CodecSettingsPtrOutput

func (H265CodecSettingsPtrOutput) ToH265CodecSettingsPtrOutputWithContext 

func (o H265CodecSettingsPtrOutput) ToH265CodecSettingsPtrOutputWithContext(ctx context.Context) H265CodecSettingsPtrOutput

func (H265CodecSettingsPtrOutput) Tune 

func (o H265CodecSettingsPtrOutput) Tune() pulumi.StringPtrOutput

Enforces the specified codec tune. The available options are [FFmpeg-compatible](https://trac.ffmpeg.org/wiki/Encode/H.265). Note that certain values for this field may cause the transcoder to override other fields you set in the `H265CodecSettings` message.

func (H265CodecSettingsPtrOutput) VbvFullnessBits 

func (o H265CodecSettingsPtrOutput) VbvFullnessBits() pulumi.IntPtrOutput

Initial fullness of the Video Buffering Verifier (VBV) buffer in bits. Must be greater than zero. The default is equal to 90% of H265CodecSettings.vbv_size_bits.

func (H265CodecSettingsPtrOutput) VbvSizeBits 

func (o H265CodecSettingsPtrOutput) VbvSizeBits() pulumi.IntPtrOutput

Size of the Video Buffering Verifier (VBV) buffer in bits. Must be greater than zero. The default is equal to `VideoStream.bitrate_bps`.

func (H265CodecSettingsPtrOutput) WidthPixels 

func (o H265CodecSettingsPtrOutput) WidthPixels() pulumi.IntPtrOutput

The width of the video in pixels. Must be an even integer. When not specified, the width is adjusted to match the specified height and input aspect ratio. If both are omitted, the input width is used. For portrait videos that contain horizontal ASR and rotation metadata, provide the width, in pixels, per the horizontal ASR. The API calculates the height per the horizontal ASR. The API detects any rotation metadata and swaps the requested height and width for the output.

type H265CodecSettingsResponse 

type H265CodecSettingsResponse struct {
	// Specifies whether an open Group of Pictures (GOP) structure should be allowed or not. The default is `false`.
	AllowOpenGop bool `pulumi:"allowOpenGop"`
	// Specify the intensity of the adaptive quantizer (AQ). Must be between 0 and 1, where 0 disables the quantizer and 1 maximizes the quantizer. A higher value equals a lower bitrate but smoother image. The default is 0.
	AqStrength float64 `pulumi:"aqStrength"`
	// The number of consecutive B-frames. Must be greater than or equal to zero. Must be less than H265CodecSettings.gop_frame_count if set. The default is 0.
	BFrameCount int `pulumi:"bFrameCount"`
	// Allow B-pyramid for reference frame selection. This may not be supported on all decoders. The default is `false`.
	BPyramid bool `pulumi:"bPyramid"`
	// The video bitrate in bits per second. The minimum value is 1,000. The maximum value is 800,000,000.
	BitrateBps int `pulumi:"bitrateBps"`
	// Target CRF level. Must be between 10 and 36, where 10 is the highest quality and 36 is the most efficient compression. The default is 21.
	CrfLevel int `pulumi:"crfLevel"`
	// Use two-pass encoding strategy to achieve better video quality. H265CodecSettings.rate_control_mode must be `vbr`. The default is `false`.
	EnableTwoPass bool `pulumi:"enableTwoPass"`
	// The target video frame rate in frames per second (FPS). Must be less than or equal to 120. Will default to the input frame rate if larger than the input frame rate. The API will generate an output FPS that is divisible by the input FPS, and smaller or equal to the target FPS. See [Calculating frame rate](https://cloud.google.com/transcoder/docs/concepts/frame-rate) for more information.
	FrameRate float64 `pulumi:"frameRate"`
	// Select the GOP size based on the specified duration. The default is `3s`. Note that `gopDuration` must be less than or equal to [`segmentDuration`](#SegmentSettings), and [`segmentDuration`](#SegmentSettings) must be divisible by `gopDuration`.
	GopDuration string `pulumi:"gopDuration"`
	// Select the GOP size based on the specified frame count. Must be greater than zero.
	GopFrameCount int `pulumi:"gopFrameCount"`
	// The height of the video in pixels. Must be an even integer. When not specified, the height is adjusted to match the specified width and input aspect ratio. If both are omitted, the input height is used. For portrait videos that contain horizontal ASR and rotation metadata, provide the height, in pixels, per the horizontal ASR. The API calculates the width per the horizontal ASR. The API detects any rotation metadata and swaps the requested height and width for the output.
	HeightPixels int `pulumi:"heightPixels"`
	// Pixel format to use. The default is `yuv420p`. Supported pixel formats: - `yuv420p` pixel format - `yuv422p` pixel format - `yuv444p` pixel format - `yuv420p10` 10-bit HDR pixel format - `yuv422p10` 10-bit HDR pixel format - `yuv444p10` 10-bit HDR pixel format - `yuv420p12` 12-bit HDR pixel format - `yuv422p12` 12-bit HDR pixel format - `yuv444p12` 12-bit HDR pixel format
	PixelFormat string `pulumi:"pixelFormat"`
	// Enforces the specified codec preset. The default is `veryfast`. The available options are [FFmpeg-compatible](https://trac.ffmpeg.org/wiki/Encode/H.265). Note that certain values for this field may cause the transcoder to override other fields you set in the `H265CodecSettings` message.
	Preset string `pulumi:"preset"`
	// Enforces the specified codec profile. The following profiles are supported: * 8-bit profiles * `main` (default) * `main-intra` * `mainstillpicture` * 10-bit profiles * `main10` (default) * `main10-intra` * `main422-10` * `main422-10-intra` * `main444-10` * `main444-10-intra` * 12-bit profiles * `main12` (default) * `main12-intra` * `main422-12` * `main422-12-intra` * `main444-12` * `main444-12-intra` The available options are [FFmpeg-compatible](https://x265.readthedocs.io/). Note that certain values for this field may cause the transcoder to override other fields you set in the `H265CodecSettings` message.
	Profile string `pulumi:"profile"`
	// Specify the mode. The default is `vbr`. Supported rate control modes: - `vbr` - variable bitrate - `crf` - constant rate factor
	RateControlMode string `pulumi:"rateControlMode"`
	// Enforces the specified codec tune. The available options are [FFmpeg-compatible](https://trac.ffmpeg.org/wiki/Encode/H.265). Note that certain values for this field may cause the transcoder to override other fields you set in the `H265CodecSettings` message.
	Tune string `pulumi:"tune"`
	// Initial fullness of the Video Buffering Verifier (VBV) buffer in bits. Must be greater than zero. The default is equal to 90% of H265CodecSettings.vbv_size_bits.
	VbvFullnessBits int `pulumi:"vbvFullnessBits"`
	// Size of the Video Buffering Verifier (VBV) buffer in bits. Must be greater than zero. The default is equal to `VideoStream.bitrate_bps`.
	VbvSizeBits int `pulumi:"vbvSizeBits"`
	// The width of the video in pixels. Must be an even integer. When not specified, the width is adjusted to match the specified height and input aspect ratio. If both are omitted, the input width is used. For portrait videos that contain horizontal ASR and rotation metadata, provide the width, in pixels, per the horizontal ASR. The API calculates the height per the horizontal ASR. The API detects any rotation metadata and swaps the requested height and width for the output.
	WidthPixels int `pulumi:"widthPixels"`
}

H265 codec settings.

type H265CodecSettingsResponseOutput 

type H265CodecSettingsResponseOutput struct{ *pulumi.OutputState }

H265 codec settings.

func (H265CodecSettingsResponseOutput) AllowOpenGop 

func (o H265CodecSettingsResponseOutput) AllowOpenGop() pulumi.BoolOutput

Specifies whether an open Group of Pictures (GOP) structure should be allowed or not. The default is `false`.

func (H265CodecSettingsResponseOutput) AqStrength 

func (o H265CodecSettingsResponseOutput) AqStrength() pulumi.Float64Output

Specify the intensity of the adaptive quantizer (AQ). Must be between 0 and 1, where 0 disables the quantizer and 1 maximizes the quantizer. A higher value equals a lower bitrate but smoother image. The default is 0.

func (H265CodecSettingsResponseOutput) BFrameCount 

func (o H265CodecSettingsResponseOutput) BFrameCount() pulumi.IntOutput

The number of consecutive B-frames. Must be greater than or equal to zero. Must be less than H265CodecSettings.gop_frame_count if set. The default is 0.

func (H265CodecSettingsResponseOutput) BPyramid 

func (o H265CodecSettingsResponseOutput) BPyramid() pulumi.BoolOutput

Allow B-pyramid for reference frame selection. This may not be supported on all decoders. The default is `false`.

func (H265CodecSettingsResponseOutput) BitrateBps 

func (o H265CodecSettingsResponseOutput) BitrateBps() pulumi.IntOutput

The video bitrate in bits per second. The minimum value is 1,000. The maximum value is 800,000,000.

func (H265CodecSettingsResponseOutput) CrfLevel 

func (o H265CodecSettingsResponseOutput) CrfLevel() pulumi.IntOutput

Target CRF level. Must be between 10 and 36, where 10 is the highest quality and 36 is the most efficient compression. The default is 21.

func (H265CodecSettingsResponseOutput) ElementType 

func (H265CodecSettingsResponseOutput) ElementType() reflect.Type

func (H265CodecSettingsResponseOutput) EnableTwoPass 

func (o H265CodecSettingsResponseOutput) EnableTwoPass() pulumi.BoolOutput

Use two-pass encoding strategy to achieve better video quality. H265CodecSettings.rate_control_mode must be `vbr`. The default is `false`.

func (H265CodecSettingsResponseOutput) FrameRate 

func (o H265CodecSettingsResponseOutput) FrameRate() pulumi.Float64Output

The target video frame rate in frames per second (FPS). Must be less than or equal to 120. Will default to the input frame rate if larger than the input frame rate. The API will generate an output FPS that is divisible by the input FPS, and smaller or equal to the target FPS. See [Calculating frame rate](https://cloud.google.com/transcoder/docs/concepts/frame-rate) for more information.

func (H265CodecSettingsResponseOutput) GopDuration 

func (o H265CodecSettingsResponseOutput) GopDuration() pulumi.StringOutput

Select the GOP size based on the specified duration. The default is `3s`. Note that `gopDuration` must be less than or equal to [`segmentDuration`](#SegmentSettings), and [`segmentDuration`](#SegmentSettings) must be divisible by `gopDuration`.

func (H265CodecSettingsResponseOutput) GopFrameCount 

func (o H265CodecSettingsResponseOutput) GopFrameCount() pulumi.IntOutput

Select the GOP size based on the specified frame count. Must be greater than zero.

func (H265CodecSettingsResponseOutput) HeightPixels 

func (o H265CodecSettingsResponseOutput) HeightPixels() pulumi.IntOutput

The height of the video in pixels. Must be an even integer. When not specified, the height is adjusted to match the specified width and input aspect ratio. If both are omitted, the input height is used. For portrait videos that contain horizontal ASR and rotation metadata, provide the height, in pixels, per the horizontal ASR. The API calculates the width per the horizontal ASR. The API detects any rotation metadata and swaps the requested height and width for the output.

func (H265CodecSettingsResponseOutput) PixelFormat 

func (o H265CodecSettingsResponseOutput) PixelFormat() pulumi.StringOutput

Pixel format to use. The default is `yuv420p`. Supported pixel formats: - `yuv420p` pixel format - `yuv422p` pixel format - `yuv444p` pixel format - `yuv420p10` 10-bit HDR pixel format - `yuv422p10` 10-bit HDR pixel format - `yuv444p10` 10-bit HDR pixel format - `yuv420p12` 12-bit HDR pixel format - `yuv422p12` 12-bit HDR pixel format - `yuv444p12` 12-bit HDR pixel format

func (H265CodecSettingsResponseOutput) Preset 

func (o H265CodecSettingsResponseOutput) Preset() pulumi.StringOutput

Enforces the specified codec preset. The default is `veryfast`. The available options are [FFmpeg-compatible](https://trac.ffmpeg.org/wiki/Encode/H.265). Note that certain values for this field may cause the transcoder to override other fields you set in the `H265CodecSettings` message.

func (H265CodecSettingsResponseOutput) Profile 

func (o H265CodecSettingsResponseOutput) Profile() pulumi.StringOutput

Enforces the specified codec profile. The following profiles are supported: * 8-bit profiles * `main` (default) * `main-intra` * `mainstillpicture` * 10-bit profiles * `main10` (default) * `main10-intra` * `main422-10` * `main422-10-intra` * `main444-10` * `main444-10-intra` * 12-bit profiles * `main12` (default) * `main12-intra` * `main422-12` * `main422-12-intra` * `main444-12` * `main444-12-intra` The available options are [FFmpeg-compatible](https://x265.readthedocs.io/). Note that certain values for this field may cause the transcoder to override other fields you set in the `H265CodecSettings` message.

func (H265CodecSettingsResponseOutput) RateControlMode 

func (o H265CodecSettingsResponseOutput) RateControlMode() pulumi.StringOutput

Specify the mode. The default is `vbr`. Supported rate control modes: - `vbr` - variable bitrate - `crf` - constant rate factor

func (H265CodecSettingsResponseOutput) ToH265CodecSettingsResponseOutput 

func (o H265CodecSettingsResponseOutput) ToH265CodecSettingsResponseOutput() H265CodecSettingsResponseOutput

func (H265CodecSettingsResponseOutput) ToH265CodecSettingsResponseOutputWithContext 

func (o H265CodecSettingsResponseOutput) ToH265CodecSettingsResponseOutputWithContext(ctx context.Context) H265CodecSettingsResponseOutput

func (H265CodecSettingsResponseOutput) Tune 

func (o H265CodecSettingsResponseOutput) Tune() pulumi.StringOutput

Enforces the specified codec tune. The available options are [FFmpeg-compatible](https://trac.ffmpeg.org/wiki/Encode/H.265). Note that certain values for this field may cause the transcoder to override other fields you set in the `H265CodecSettings` message.

func (H265CodecSettingsResponseOutput) VbvFullnessBits 

func (o H265CodecSettingsResponseOutput) VbvFullnessBits() pulumi.IntOutput

Initial fullness of the Video Buffering Verifier (VBV) buffer in bits. Must be greater than zero. The default is equal to 90% of H265CodecSettings.vbv_size_bits.

func (H265CodecSettingsResponseOutput) VbvSizeBits 

func (o H265CodecSettingsResponseOutput) VbvSizeBits() pulumi.IntOutput

Size of the Video Buffering Verifier (VBV) buffer in bits. Must be greater than zero. The default is equal to `VideoStream.bitrate_bps`.

func (H265CodecSettingsResponseOutput) WidthPixels 

func (o H265CodecSettingsResponseOutput) WidthPixels() pulumi.IntOutput

The width of the video in pixels. Must be an even integer. When not specified, the width is adjusted to match the specified height and input aspect ratio. If both are omitted, the input width is used. For portrait videos that contain horizontal ASR and rotation metadata, provide the width, in pixels, per the horizontal ASR. The API calculates the height per the horizontal ASR. The API detects any rotation metadata and swaps the requested height and width for the output.

type Image 

type Image struct {
	// Target image opacity. Valid values are from `1.0` (solid, default) to `0.0` (transparent), exclusive. Set this to a value greater than `0.0`.
	Alpha *float64 `pulumi:"alpha"`
	// Normalized image resolution, based on output video resolution. Valid values: `0.0`–`1.0`. To respect the original image aspect ratio, set either `x` or `y` to `0.0`. To use the original image resolution, set both `x` and `y` to `0.0`.
	Resolution *NormalizedCoordinate `pulumi:"resolution"`
	// URI of the image in Cloud Storage. For example, `gs://bucket/inputs/image.png`. Only PNG and JPEG images are supported.
	Uri string `pulumi:"uri"`
}

Overlaid image.

type ImageArgs 

type ImageArgs struct {
	// Target image opacity. Valid values are from `1.0` (solid, default) to `0.0` (transparent), exclusive. Set this to a value greater than `0.0`.
	Alpha pulumi.Float64PtrInput `pulumi:"alpha"`
	// Normalized image resolution, based on output video resolution. Valid values: `0.0`–`1.0`. To respect the original image aspect ratio, set either `x` or `y` to `0.0`. To use the original image resolution, set both `x` and `y` to `0.0`.
	Resolution NormalizedCoordinatePtrInput `pulumi:"resolution"`
	// URI of the image in Cloud Storage. For example, `gs://bucket/inputs/image.png`. Only PNG and JPEG images are supported.
	Uri pulumi.StringInput `pulumi:"uri"`
}

Overlaid image.

func (ImageArgs) ElementType 

func (ImageArgs) ElementType() reflect.Type

func (ImageArgs) ToImageOutput 

func (i ImageArgs) ToImageOutput() ImageOutput

func (ImageArgs) ToImageOutputWithContext 

func (i ImageArgs) ToImageOutputWithContext(ctx context.Context) ImageOutput

func (ImageArgs) ToImagePtrOutput 

func (i ImageArgs) ToImagePtrOutput() ImagePtrOutput

func (ImageArgs) ToImagePtrOutputWithContext 

func (i ImageArgs) ToImagePtrOutputWithContext(ctx context.Context) ImagePtrOutput

type ImageInput 

type ImageInput interface {
	pulumi.Input

	ToImageOutput() ImageOutput
	ToImageOutputWithContext(context.Context) ImageOutput
}

ImageInput is an input type that accepts ImageArgs and ImageOutput values. You can construct a concrete instance of `ImageInput` via: 

ImageArgs{...}

type ImageOutput 

type ImageOutput struct{ *pulumi.OutputState }

Overlaid image.

func (ImageOutput) Alpha 

func (o ImageOutput) Alpha() pulumi.Float64PtrOutput

Target image opacity. Valid values are from `1.0` (solid, default) to `0.0` (transparent), exclusive. Set this to a value greater than `0.0`.

func (ImageOutput) ElementType 

func (ImageOutput) ElementType() reflect.Type

func (ImageOutput) Resolution 

func (o ImageOutput) Resolution() NormalizedCoordinatePtrOutput

Normalized image resolution, based on output video resolution. Valid values: `0.0`–`1.0`. To respect the original image aspect ratio, set either `x` or `y` to `0.0`. To use the original image resolution, set both `x` and `y` to `0.0`.

func (ImageOutput) ToImageOutput 

func (o ImageOutput) ToImageOutput() ImageOutput

func (ImageOutput) ToImageOutputWithContext 

func (o ImageOutput) ToImageOutputWithContext(ctx context.Context) ImageOutput

func (ImageOutput) ToImagePtrOutput 

func (o ImageOutput) ToImagePtrOutput() ImagePtrOutput

func (ImageOutput) ToImagePtrOutputWithContext 

func (o ImageOutput) ToImagePtrOutputWithContext(ctx context.Context) ImagePtrOutput

func (ImageOutput) Uri 

func (o ImageOutput) Uri() pulumi.StringOutput

URI of the image in Cloud Storage. For example, `gs://bucket/inputs/image.png`. Only PNG and JPEG images are supported.

type ImagePtrInput 

type ImagePtrInput interface {
	pulumi.Input

	ToImagePtrOutput() ImagePtrOutput
	ToImagePtrOutputWithContext(context.Context) ImagePtrOutput
}

ImagePtrInput is an input type that accepts ImageArgs, ImagePtr and ImagePtrOutput values. You can construct a concrete instance of `ImagePtrInput` via: 

        ImageArgs{...}

or:

        nil

func ImagePtr 

func ImagePtr(v *ImageArgs) ImagePtrInput

type ImagePtrOutput 

type ImagePtrOutput struct{ *pulumi.OutputState }

func (ImagePtrOutput) Alpha 

func (o ImagePtrOutput) Alpha() pulumi.Float64PtrOutput

Target image opacity. Valid values are from `1.0` (solid, default) to `0.0` (transparent), exclusive. Set this to a value greater than `0.0`.

func (ImagePtrOutput) Elem 

func (o ImagePtrOutput) Elem() ImageOutput

func (ImagePtrOutput) ElementType 

func (ImagePtrOutput) ElementType() reflect.Type

func (ImagePtrOutput) Resolution 

func (o ImagePtrOutput) Resolution() NormalizedCoordinatePtrOutput

Normalized image resolution, based on output video resolution. Valid values: `0.0`–`1.0`. To respect the original image aspect ratio, set either `x` or `y` to `0.0`. To use the original image resolution, set both `x` and `y` to `0.0`.

func (ImagePtrOutput) ToImagePtrOutput 

func (o ImagePtrOutput) ToImagePtrOutput() ImagePtrOutput

func (ImagePtrOutput) ToImagePtrOutputWithContext 

func (o ImagePtrOutput) ToImagePtrOutputWithContext(ctx context.Context) ImagePtrOutput

func (ImagePtrOutput) Uri 

func (o ImagePtrOutput) Uri() pulumi.StringPtrOutput

URI of the image in Cloud Storage. For example, `gs://bucket/inputs/image.png`. Only PNG and JPEG images are supported.

type ImageResponse 

type ImageResponse struct {
	// Target image opacity. Valid values are from `1.0` (solid, default) to `0.0` (transparent), exclusive. Set this to a value greater than `0.0`.
	Alpha float64 `pulumi:"alpha"`
	// Normalized image resolution, based on output video resolution. Valid values: `0.0`–`1.0`. To respect the original image aspect ratio, set either `x` or `y` to `0.0`. To use the original image resolution, set both `x` and `y` to `0.0`.
	Resolution NormalizedCoordinateResponse `pulumi:"resolution"`
	// URI of the image in Cloud Storage. For example, `gs://bucket/inputs/image.png`. Only PNG and JPEG images are supported.
	Uri string `pulumi:"uri"`
}

Overlaid image.

type ImageResponseOutput 

type ImageResponseOutput struct{ *pulumi.OutputState }

Overlaid image.

func (ImageResponseOutput) Alpha 

func (o ImageResponseOutput) Alpha() pulumi.Float64Output

Target image opacity. Valid values are from `1.0` (solid, default) to `0.0` (transparent), exclusive. Set this to a value greater than `0.0`.

func (ImageResponseOutput) ElementType 

func (ImageResponseOutput) ElementType() reflect.Type

func (ImageResponseOutput) Resolution 

func (o ImageResponseOutput) Resolution() NormalizedCoordinateResponseOutput

Normalized image resolution, based on output video resolution. Valid values: `0.0`–`1.0`. To respect the original image aspect ratio, set either `x` or `y` to `0.0`. To use the original image resolution, set both `x` and `y` to `0.0`.

func (ImageResponseOutput) ToImageResponseOutput 

func (o ImageResponseOutput) ToImageResponseOutput() ImageResponseOutput

func (ImageResponseOutput) ToImageResponseOutputWithContext 

func (o ImageResponseOutput) ToImageResponseOutputWithContext(ctx context.Context) ImageResponseOutput

func (ImageResponseOutput) Uri 

func (o ImageResponseOutput) Uri() pulumi.StringOutput

URI of the image in Cloud Storage. For example, `gs://bucket/inputs/image.png`. Only PNG and JPEG images are supported.

type Input 

type Input struct {
	// A unique key for this input. Must be specified when using advanced mapping and edit lists.
	Key *string `pulumi:"key"`
	// Preprocessing configurations.
	PreprocessingConfig *PreprocessingConfig `pulumi:"preprocessingConfig"`
	// URI of the media. Input files must be at least 5 seconds in duration and stored in Cloud Storage (for example, `gs://bucket/inputs/file.mp4`). If empty, the value is populated from Job.input_uri. See [Supported input and output formats](https://cloud.google.com/transcoder/docs/concepts/supported-input-and-output-formats).
	Uri *string `pulumi:"uri"`
}

Input asset.

type InputArgs 

type InputArgs struct {
	// A unique key for this input. Must be specified when using advanced mapping and edit lists.
	Key pulumi.StringPtrInput `pulumi:"key"`
	// Preprocessing configurations.
	PreprocessingConfig PreprocessingConfigPtrInput `pulumi:"preprocessingConfig"`
	// URI of the media. Input files must be at least 5 seconds in duration and stored in Cloud Storage (for example, `gs://bucket/inputs/file.mp4`). If empty, the value is populated from Job.input_uri. See [Supported input and output formats](https://cloud.google.com/transcoder/docs/concepts/supported-input-and-output-formats).
	Uri pulumi.StringPtrInput `pulumi:"uri"`
}

Input asset.

func (InputArgs) ElementType 

func (InputArgs) ElementType() reflect.Type

func (InputArgs) ToInputOutput 

func (i InputArgs) ToInputOutput() InputOutput

func (InputArgs) ToInputOutputWithContext 

func (i InputArgs) ToInputOutputWithContext(ctx context.Context) InputOutput

type InputArray 

type InputArray []InputInput

func (InputArray) ElementType 

func (InputArray) ElementType() reflect.Type

func (InputArray) ToInputArrayOutput 

func (i InputArray) ToInputArrayOutput() InputArrayOutput

func (InputArray) ToInputArrayOutputWithContext 

func (i InputArray) ToInputArrayOutputWithContext(ctx context.Context) InputArrayOutput

type InputArrayInput 

type InputArrayInput interface {
	pulumi.Input

	ToInputArrayOutput() InputArrayOutput
	ToInputArrayOutputWithContext(context.Context) InputArrayOutput
}

InputArrayInput is an input type that accepts InputArray and InputArrayOutput values. You can construct a concrete instance of `InputArrayInput` via: 

InputArray{ InputArgs{...} }

type InputArrayOutput 

type InputArrayOutput struct{ *pulumi.OutputState }

func (InputArrayOutput) ElementType 

func (InputArrayOutput) ElementType() reflect.Type

func (InputArrayOutput) Index 

func (o InputArrayOutput) Index(i pulumi.IntInput) InputOutput

func (InputArrayOutput) ToInputArrayOutput 

func (o InputArrayOutput) ToInputArrayOutput() InputArrayOutput

func (InputArrayOutput) ToInputArrayOutputWithContext 

func (o InputArrayOutput) ToInputArrayOutputWithContext(ctx context.Context) InputArrayOutput

type InputInput 

type InputInput interface {
	pulumi.Input

	ToInputOutput() InputOutput
	ToInputOutputWithContext(context.Context) InputOutput
}

InputInput is an input type that accepts InputArgs and InputOutput values. You can construct a concrete instance of `InputInput` via: 

InputArgs{...}

type InputOutput 

type InputOutput struct{ *pulumi.OutputState }

Input asset.

func (InputOutput) ElementType 

func (InputOutput) ElementType() reflect.Type

func (InputOutput) Key 

func (o InputOutput) Key() pulumi.StringPtrOutput

A unique key for this input. Must be specified when using advanced mapping and edit lists.

func (InputOutput) PreprocessingConfig 

func (o InputOutput) PreprocessingConfig() PreprocessingConfigPtrOutput

Preprocessing configurations.

func (InputOutput) ToInputOutput 

func (o InputOutput) ToInputOutput() InputOutput

func (InputOutput) ToInputOutputWithContext 

func (o InputOutput) ToInputOutputWithContext(ctx context.Context) InputOutput

func (InputOutput) Uri 

func (o InputOutput) Uri() pulumi.StringPtrOutput

URI of the media. Input files must be at least 5 seconds in duration and stored in Cloud Storage (for example, `gs://bucket/inputs/file.mp4`). If empty, the value is populated from Job.input_uri. See [Supported input and output formats](https://cloud.google.com/transcoder/docs/concepts/supported-input-and-output-formats).

type InputResponse 

type InputResponse struct {
	// A unique key for this input. Must be specified when using advanced mapping and edit lists.
	Key string `pulumi:"key"`
	// Preprocessing configurations.
	PreprocessingConfig PreprocessingConfigResponse `pulumi:"preprocessingConfig"`
	// URI of the media. Input files must be at least 5 seconds in duration and stored in Cloud Storage (for example, `gs://bucket/inputs/file.mp4`). If empty, the value is populated from Job.input_uri. See [Supported input and output formats](https://cloud.google.com/transcoder/docs/concepts/supported-input-and-output-formats).
	Uri string `pulumi:"uri"`
}

Input asset.

type InputResponseArrayOutput 

type InputResponseArrayOutput struct{ *pulumi.OutputState }

func (InputResponseArrayOutput) ElementType 

func (InputResponseArrayOutput) ElementType() reflect.Type

func (InputResponseArrayOutput) Index 

func (o InputResponseArrayOutput) Index(i pulumi.IntInput) InputResponseOutput

func (InputResponseArrayOutput) ToInputResponseArrayOutput 

func (o InputResponseArrayOutput) ToInputResponseArrayOutput() InputResponseArrayOutput

func (InputResponseArrayOutput) ToInputResponseArrayOutputWithContext 

func (o InputResponseArrayOutput) ToInputResponseArrayOutputWithContext(ctx context.Context) InputResponseArrayOutput

type InputResponseOutput 

type InputResponseOutput struct{ *pulumi.OutputState }

Input asset.

func (InputResponseOutput) ElementType 

func (InputResponseOutput) ElementType() reflect.Type

func (InputResponseOutput) Key 

func (o InputResponseOutput) Key() pulumi.StringOutput

A unique key for this input. Must be specified when using advanced mapping and edit lists.

func (InputResponseOutput) PreprocessingConfig 

func (o InputResponseOutput) PreprocessingConfig() PreprocessingConfigResponseOutput

Preprocessing configurations.

func (InputResponseOutput) ToInputResponseOutput 

func (o InputResponseOutput) ToInputResponseOutput() InputResponseOutput

func (InputResponseOutput) ToInputResponseOutputWithContext 

func (o InputResponseOutput) ToInputResponseOutputWithContext(ctx context.Context) InputResponseOutput

func (InputResponseOutput) Uri 

func (o InputResponseOutput) Uri() pulumi.StringOutput

URI of the media. Input files must be at least 5 seconds in duration and stored in Cloud Storage (for example, `gs://bucket/inputs/file.mp4`). If empty, the value is populated from Job.input_uri. See [Supported input and output formats](https://cloud.google.com/transcoder/docs/concepts/supported-input-and-output-formats).

type Job 

type Job struct {
	pulumi.CustomResourceState

	// The processing priority of a batch job. This field can only be set for batch mode jobs. The default value is 0. This value cannot be negative. Higher values correspond to higher priorities for the job.
	BatchModePriority pulumi.IntOutput `pulumi:"batchModePriority"`
	// The configuration for this job.
	Config JobConfigResponseOutput `pulumi:"config"`
	// The time the job was created.
	CreateTime pulumi.StringOutput `pulumi:"createTime"`
	// The time the transcoding finished.
	EndTime pulumi.StringOutput `pulumi:"endTime"`
	// An error object that describes the reason for the failure. This property is always present when ProcessingState is `FAILED`.
	Error StatusResponseOutput `pulumi:"error"`
	// Input only. Specify the `input_uri` to populate empty `uri` fields in each element of `Job.config.inputs` or `JobTemplate.config.inputs` when using template. URI of the media. Input files must be at least 5 seconds in duration and stored in Cloud Storage (for example, `gs://bucket/inputs/file.mp4`). See [Supported input and output formats](https://cloud.google.com/transcoder/docs/concepts/supported-input-and-output-formats).
	InputUri pulumi.StringOutput `pulumi:"inputUri"`
	// The labels associated with this job. You can use these to organize and group your jobs.
	Labels   pulumi.StringMapOutput `pulumi:"labels"`
	Location pulumi.StringOutput    `pulumi:"location"`
	// The processing mode of the job. The default is `PROCESSING_MODE_INTERACTIVE`.
	Mode pulumi.StringOutput `pulumi:"mode"`
	// The resource name of the job. Format: `projects/{project_number}/locations/{location}/jobs/{job}`
	Name pulumi.StringOutput `pulumi:"name"`
	// Optional. The optimization strategy of the job. The default is `AUTODETECT`.
	Optimization pulumi.StringOutput `pulumi:"optimization"`
	// Input only. Specify the `output_uri` to populate an empty `Job.config.output.uri` or `JobTemplate.config.output.uri` when using template. URI for the output file(s). For example, `gs://my-bucket/outputs/`. See [Supported input and output formats](https://cloud.google.com/transcoder/docs/concepts/supported-input-and-output-formats).
	OutputUri pulumi.StringOutput `pulumi:"outputUri"`
	Project   pulumi.StringOutput `pulumi:"project"`
	// The time the transcoding started.
	StartTime pulumi.StringOutput `pulumi:"startTime"`
	// The current state of the job.
	State pulumi.StringOutput `pulumi:"state"`
	// Input only. Specify the `template_id` to use for populating `Job.config`. The default is `preset/web-hd`, which is the only supported preset. User defined JobTemplate: `{job_template_id}`
	TemplateId pulumi.StringOutput `pulumi:"templateId"`
	// Job time to live value in days, which will be effective after job completion. Job should be deleted automatically after the given TTL. Enter a value between 1 and 90. The default is 30.
	TtlAfterCompletionDays pulumi.IntOutput `pulumi:"ttlAfterCompletionDays"`
}

Creates a job in the specified region.

func GetJob 

func GetJob(ctx *pulumi.Context,
	name string, id pulumi.IDInput, state *JobState, opts ...pulumi.ResourceOption) (*Job, error)

GetJob gets an existing Job resource's state with the given name, ID, and optional state properties that are used to uniquely qualify the lookup (nil if not required).

func NewJob 

func NewJob(ctx *pulumi.Context,
	name string, args *JobArgs, opts ...pulumi.ResourceOption) (*Job, error)

NewJob registers a new resource with the given unique name, arguments, and options.

func (*Job) ElementType 

func (*Job) ElementType() reflect.Type

func (*Job) ToJobOutput 

func (i *Job) ToJobOutput() JobOutput

func (*Job) ToJobOutputWithContext 

func (i *Job) ToJobOutputWithContext(ctx context.Context) JobOutput

type JobArgs 

type JobArgs struct {
	// The processing priority of a batch job. This field can only be set for batch mode jobs. The default value is 0. This value cannot be negative. Higher values correspond to higher priorities for the job.
	BatchModePriority pulumi.IntPtrInput
	// The configuration for this job.
	Config JobConfigPtrInput
	// Input only. Specify the `input_uri` to populate empty `uri` fields in each element of `Job.config.inputs` or `JobTemplate.config.inputs` when using template. URI of the media. Input files must be at least 5 seconds in duration and stored in Cloud Storage (for example, `gs://bucket/inputs/file.mp4`). See [Supported input and output formats](https://cloud.google.com/transcoder/docs/concepts/supported-input-and-output-formats).
	InputUri pulumi.StringPtrInput
	// The labels associated with this job. You can use these to organize and group your jobs.
	Labels   pulumi.StringMapInput
	Location pulumi.StringPtrInput
	// The processing mode of the job. The default is `PROCESSING_MODE_INTERACTIVE`.
	Mode JobModePtrInput
	// The resource name of the job. Format: `projects/{project_number}/locations/{location}/jobs/{job}`
	Name pulumi.StringPtrInput
	// Optional. The optimization strategy of the job. The default is `AUTODETECT`.
	Optimization JobOptimizationPtrInput
	// Input only. Specify the `output_uri` to populate an empty `Job.config.output.uri` or `JobTemplate.config.output.uri` when using template. URI for the output file(s). For example, `gs://my-bucket/outputs/`. See [Supported input and output formats](https://cloud.google.com/transcoder/docs/concepts/supported-input-and-output-formats).
	OutputUri pulumi.StringPtrInput
	Project   pulumi.StringPtrInput
	// Input only. Specify the `template_id` to use for populating `Job.config`. The default is `preset/web-hd`, which is the only supported preset. User defined JobTemplate: `{job_template_id}`
	TemplateId pulumi.StringPtrInput
	// Job time to live value in days, which will be effective after job completion. Job should be deleted automatically after the given TTL. Enter a value between 1 and 90. The default is 30.
	TtlAfterCompletionDays pulumi.IntPtrInput
}

The set of arguments for constructing a Job resource.

func (JobArgs) ElementType 

func (JobArgs) ElementType() reflect.Type

type JobConfig 

type JobConfig struct {
	// List of ad breaks. Specifies where to insert ad break tags in the output manifests.
	AdBreaks []AdBreak `pulumi:"adBreaks"`
	// List of edit atoms. Defines the ultimate timeline of the resulting file or manifest.
	EditList []EditAtom `pulumi:"editList"`
	// List of elementary streams.
	ElementaryStreams []ElementaryStream `pulumi:"elementaryStreams"`
	// List of encryption configurations for the content. Each configuration has an ID. Specify this ID in the MuxStream.encryption_id field to indicate the configuration to use for that `MuxStream` output.
	Encryptions []Encryption `pulumi:"encryptions"`
	// List of input assets stored in Cloud Storage.
	Inputs []Input `pulumi:"inputs"`
	// List of output manifests.
	Manifests []Manifest `pulumi:"manifests"`
	// List of multiplexing settings for output streams.
	MuxStreams []MuxStream `pulumi:"muxStreams"`
	// Output configuration.
	Output *Output `pulumi:"output"`
	// List of overlays on the output video, in descending Z-order.
	Overlays []Overlay `pulumi:"overlays"`
	// Destination on Pub/Sub.
	PubsubDestination *PubsubDestination `pulumi:"pubsubDestination"`
	// List of output sprite sheets. Spritesheets require at least one VideoStream in the Jobconfig.
	SpriteSheets []SpriteSheet `pulumi:"spriteSheets"`
}

Job configuration

type JobConfigArgs 

type JobConfigArgs struct {
	// List of ad breaks. Specifies where to insert ad break tags in the output manifests.
	AdBreaks AdBreakArrayInput `pulumi:"adBreaks"`
	// List of edit atoms. Defines the ultimate timeline of the resulting file or manifest.
	EditList EditAtomArrayInput `pulumi:"editList"`
	// List of elementary streams.
	ElementaryStreams ElementaryStreamArrayInput `pulumi:"elementaryStreams"`
	// List of encryption configurations for the content. Each configuration has an ID. Specify this ID in the MuxStream.encryption_id field to indicate the configuration to use for that `MuxStream` output.
	Encryptions EncryptionArrayInput `pulumi:"encryptions"`
	// List of input assets stored in Cloud Storage.
	Inputs InputArrayInput `pulumi:"inputs"`
	// List of output manifests.
	Manifests ManifestArrayInput `pulumi:"manifests"`
	// List of multiplexing settings for output streams.
	MuxStreams MuxStreamArrayInput `pulumi:"muxStreams"`
	// Output configuration.
	Output OutputPtrInput `pulumi:"output"`
	// List of overlays on the output video, in descending Z-order.
	Overlays OverlayArrayInput `pulumi:"overlays"`
	// Destination on Pub/Sub.
	PubsubDestination PubsubDestinationPtrInput `pulumi:"pubsubDestination"`
	// List of output sprite sheets. Spritesheets require at least one VideoStream in the Jobconfig.
	SpriteSheets SpriteSheetArrayInput `pulumi:"spriteSheets"`
}

Job configuration

func (JobConfigArgs) ElementType 

func (JobConfigArgs) ElementType() reflect.Type

func (JobConfigArgs) ToJobConfigOutput 

func (i JobConfigArgs) ToJobConfigOutput() JobConfigOutput

func (JobConfigArgs) ToJobConfigOutputWithContext 

func (i JobConfigArgs) ToJobConfigOutputWithContext(ctx context.Context) JobConfigOutput

func (JobConfigArgs) ToJobConfigPtrOutput 

func (i JobConfigArgs) ToJobConfigPtrOutput() JobConfigPtrOutput

func (JobConfigArgs) ToJobConfigPtrOutputWithContext 

func (i JobConfigArgs) ToJobConfigPtrOutputWithContext(ctx context.Context) JobConfigPtrOutput

type JobConfigInput 

type JobConfigInput interface {
	pulumi.Input

	ToJobConfigOutput() JobConfigOutput
	ToJobConfigOutputWithContext(context.Context) JobConfigOutput
}

JobConfigInput is an input type that accepts JobConfigArgs and JobConfigOutput values. You can construct a concrete instance of `JobConfigInput` via: 

JobConfigArgs{...}

type JobConfigOutput 

type JobConfigOutput struct{ *pulumi.OutputState }

Job configuration

func (JobConfigOutput) AdBreaks 

func (o JobConfigOutput) AdBreaks() AdBreakArrayOutput

List of ad breaks. Specifies where to insert ad break tags in the output manifests.

func (JobConfigOutput) EditList 

func (o JobConfigOutput) EditList() EditAtomArrayOutput

List of edit atoms. Defines the ultimate timeline of the resulting file or manifest.

func (JobConfigOutput) ElementType 

func (JobConfigOutput) ElementType() reflect.Type

func (JobConfigOutput) ElementaryStreams 

func (o JobConfigOutput) ElementaryStreams() ElementaryStreamArrayOutput

List of elementary streams.

func (JobConfigOutput) Encryptions added in v0.32.0 

func (o JobConfigOutput) Encryptions() EncryptionArrayOutput

List of encryption configurations for the content. Each configuration has an ID. Specify this ID in the MuxStream.encryption_id field to indicate the configuration to use for that `MuxStream` output.

func (JobConfigOutput) Inputs 

func (o JobConfigOutput) Inputs() InputArrayOutput

List of input assets stored in Cloud Storage.

func (JobConfigOutput) Manifests 

func (o JobConfigOutput) Manifests() ManifestArrayOutput

List of output manifests.

func (JobConfigOutput) MuxStreams 

func (o JobConfigOutput) MuxStreams() MuxStreamArrayOutput

List of multiplexing settings for output streams.

func (JobConfigOutput) Output 

func (o JobConfigOutput) Output() OutputPtrOutput

Output configuration.

func (JobConfigOutput) Overlays 

func (o JobConfigOutput) Overlays() OverlayArrayOutput

List of overlays on the output video, in descending Z-order.

func (JobConfigOutput) PubsubDestination 

func (o JobConfigOutput) PubsubDestination() PubsubDestinationPtrOutput

Destination on Pub/Sub.

func (JobConfigOutput) SpriteSheets 

func (o JobConfigOutput) SpriteSheets() SpriteSheetArrayOutput

List of output sprite sheets. Spritesheets require at least one VideoStream in the Jobconfig.

func (JobConfigOutput) ToJobConfigOutput 

func (o JobConfigOutput) ToJobConfigOutput() JobConfigOutput

func (JobConfigOutput) ToJobConfigOutputWithContext 

func (o JobConfigOutput) ToJobConfigOutputWithContext(ctx context.Context) JobConfigOutput

func (JobConfigOutput) ToJobConfigPtrOutput 

func (o JobConfigOutput) ToJobConfigPtrOutput() JobConfigPtrOutput

func (JobConfigOutput) ToJobConfigPtrOutputWithContext 

func (o JobConfigOutput) ToJobConfigPtrOutputWithContext(ctx context.Context) JobConfigPtrOutput

type JobConfigPtrInput 

type JobConfigPtrInput interface {
	pulumi.Input

	ToJobConfigPtrOutput() JobConfigPtrOutput
	ToJobConfigPtrOutputWithContext(context.Context) JobConfigPtrOutput
}

JobConfigPtrInput is an input type that accepts JobConfigArgs, JobConfigPtr and JobConfigPtrOutput values. You can construct a concrete instance of `JobConfigPtrInput` via: 

        JobConfigArgs{...}

or:

        nil

func JobConfigPtr 

func JobConfigPtr(v *JobConfigArgs) JobConfigPtrInput

type JobConfigPtrOutput 

type JobConfigPtrOutput struct{ *pulumi.OutputState }

func (JobConfigPtrOutput) AdBreaks 

func (o JobConfigPtrOutput) AdBreaks() AdBreakArrayOutput

List of ad breaks. Specifies where to insert ad break tags in the output manifests.

func (JobConfigPtrOutput) EditList 

func (o JobConfigPtrOutput) EditList() EditAtomArrayOutput

List of edit atoms. Defines the ultimate timeline of the resulting file or manifest.

func (JobConfigPtrOutput) Elem 

func (o JobConfigPtrOutput) Elem() JobConfigOutput

func (JobConfigPtrOutput) ElementType 

func (JobConfigPtrOutput) ElementType() reflect.Type

func (JobConfigPtrOutput) ElementaryStreams 

func (o JobConfigPtrOutput) ElementaryStreams() ElementaryStreamArrayOutput

List of elementary streams.

func (JobConfigPtrOutput) Encryptions added in v0.32.0 

func (o JobConfigPtrOutput) Encryptions() EncryptionArrayOutput

List of encryption configurations for the content. Each configuration has an ID. Specify this ID in the MuxStream.encryption_id field to indicate the configuration to use for that `MuxStream` output.

func (JobConfigPtrOutput) Inputs 

func (o JobConfigPtrOutput) Inputs() InputArrayOutput

List of input assets stored in Cloud Storage.

func (JobConfigPtrOutput) Manifests 

func (o JobConfigPtrOutput) Manifests() ManifestArrayOutput

List of output manifests.

func (JobConfigPtrOutput) MuxStreams 

func (o JobConfigPtrOutput) MuxStreams() MuxStreamArrayOutput

List of multiplexing settings for output streams.

func (JobConfigPtrOutput) Output 

func (o JobConfigPtrOutput) Output() OutputPtrOutput

Output configuration.

func (JobConfigPtrOutput) Overlays 

func (o JobConfigPtrOutput) Overlays() OverlayArrayOutput

List of overlays on the output video, in descending Z-order.

func (JobConfigPtrOutput) PubsubDestination 

func (o JobConfigPtrOutput) PubsubDestination() PubsubDestinationPtrOutput

Destination on Pub/Sub.

func (JobConfigPtrOutput) SpriteSheets 

func (o JobConfigPtrOutput) SpriteSheets() SpriteSheetArrayOutput

List of output sprite sheets. Spritesheets require at least one VideoStream in the Jobconfig.

func (JobConfigPtrOutput) ToJobConfigPtrOutput 

func (o JobConfigPtrOutput) ToJobConfigPtrOutput() JobConfigPtrOutput

func (JobConfigPtrOutput) ToJobConfigPtrOutputWithContext 

func (o JobConfigPtrOutput) ToJobConfigPtrOutputWithContext(ctx context.Context) JobConfigPtrOutput

type JobConfigResponse 

type JobConfigResponse struct {
	// List of ad breaks. Specifies where to insert ad break tags in the output manifests.
	AdBreaks []AdBreakResponse `pulumi:"adBreaks"`
	// List of edit atoms. Defines the ultimate timeline of the resulting file or manifest.
	EditList []EditAtomResponse `pulumi:"editList"`
	// List of elementary streams.
	ElementaryStreams []ElementaryStreamResponse `pulumi:"elementaryStreams"`
	// List of encryption configurations for the content. Each configuration has an ID. Specify this ID in the MuxStream.encryption_id field to indicate the configuration to use for that `MuxStream` output.
	Encryptions []EncryptionResponse `pulumi:"encryptions"`
	// List of input assets stored in Cloud Storage.
	Inputs []InputResponse `pulumi:"inputs"`
	// List of output manifests.
	Manifests []ManifestResponse `pulumi:"manifests"`
	// List of multiplexing settings for output streams.
	MuxStreams []MuxStreamResponse `pulumi:"muxStreams"`
	// Output configuration.
	Output OutputResponse `pulumi:"output"`
	// List of overlays on the output video, in descending Z-order.
	Overlays []OverlayResponse `pulumi:"overlays"`
	// Destination on Pub/Sub.
	PubsubDestination PubsubDestinationResponse `pulumi:"pubsubDestination"`
	// List of output sprite sheets. Spritesheets require at least one VideoStream in the Jobconfig.
	SpriteSheets []SpriteSheetResponse `pulumi:"spriteSheets"`
}

Job configuration

type JobConfigResponseOutput 

type JobConfigResponseOutput struct{ *pulumi.OutputState }

Job configuration

func (JobConfigResponseOutput) AdBreaks 

func (o JobConfigResponseOutput) AdBreaks() AdBreakResponseArrayOutput

List of ad breaks. Specifies where to insert ad break tags in the output manifests.

func (JobConfigResponseOutput) EditList 

func (o JobConfigResponseOutput) EditList() EditAtomResponseArrayOutput

List of edit atoms. Defines the ultimate timeline of the resulting file or manifest.

func (JobConfigResponseOutput) ElementType 

func (JobConfigResponseOutput) ElementType() reflect.Type

func (JobConfigResponseOutput) ElementaryStreams 

func (o JobConfigResponseOutput) ElementaryStreams() ElementaryStreamResponseArrayOutput

List of elementary streams.

func (JobConfigResponseOutput) Encryptions added in v0.32.0 

func (o JobConfigResponseOutput) Encryptions() EncryptionResponseArrayOutput

List of encryption configurations for the content. Each configuration has an ID. Specify this ID in the MuxStream.encryption_id field to indicate the configuration to use for that `MuxStream` output.

func (JobConfigResponseOutput) Inputs 

func (o JobConfigResponseOutput) Inputs() InputResponseArrayOutput

List of input assets stored in Cloud Storage.

func (JobConfigResponseOutput) Manifests 

func (o JobConfigResponseOutput) Manifests() ManifestResponseArrayOutput

List of output manifests.

func (JobConfigResponseOutput) MuxStreams 

func (o JobConfigResponseOutput) MuxStreams() MuxStreamResponseArrayOutput

List of multiplexing settings for output streams.

func (JobConfigResponseOutput) Output 

func (o JobConfigResponseOutput) Output() OutputResponseOutput

Output configuration.

func (JobConfigResponseOutput) Overlays 

func (o JobConfigResponseOutput) Overlays() OverlayResponseArrayOutput

List of overlays on the output video, in descending Z-order.

func (JobConfigResponseOutput) PubsubDestination 

func (o JobConfigResponseOutput) PubsubDestination() PubsubDestinationResponseOutput

Destination on Pub/Sub.

func (JobConfigResponseOutput) SpriteSheets 

func (o JobConfigResponseOutput) SpriteSheets() SpriteSheetResponseArrayOutput

List of output sprite sheets. Spritesheets require at least one VideoStream in the Jobconfig.

func (JobConfigResponseOutput) ToJobConfigResponseOutput 

func (o JobConfigResponseOutput) ToJobConfigResponseOutput() JobConfigResponseOutput

func (JobConfigResponseOutput) ToJobConfigResponseOutputWithContext 

func (o JobConfigResponseOutput) ToJobConfigResponseOutputWithContext(ctx context.Context) JobConfigResponseOutput

type JobInput 

type JobInput interface {
	pulumi.Input

	ToJobOutput() JobOutput
	ToJobOutputWithContext(ctx context.Context) JobOutput
}

type JobMode added in v0.29.0 

type JobMode string

The processing mode of the job. The default is `PROCESSING_MODE_INTERACTIVE`.

func (JobMode) ElementType added in v0.29.0 

func (JobMode) ElementType() reflect.Type

func (JobMode) ToJobModeOutput added in v0.29.0 

func (e JobMode) ToJobModeOutput() JobModeOutput

func (JobMode) ToJobModeOutputWithContext added in v0.29.0 

func (e JobMode) ToJobModeOutputWithContext(ctx context.Context) JobModeOutput

func (JobMode) ToJobModePtrOutput added in v0.29.0 

func (e JobMode) ToJobModePtrOutput() JobModePtrOutput

func (JobMode) ToJobModePtrOutputWithContext added in v0.29.0 

func (e JobMode) ToJobModePtrOutputWithContext(ctx context.Context) JobModePtrOutput

func (JobMode) ToStringOutput added in v0.29.0 

func (e JobMode) ToStringOutput() pulumi.StringOutput

func (JobMode) ToStringOutputWithContext added in v0.29.0 

func (e JobMode) ToStringOutputWithContext(ctx context.Context) pulumi.StringOutput

func (JobMode) ToStringPtrOutput added in v0.29.0 

func (e JobMode) ToStringPtrOutput() pulumi.StringPtrOutput

func (JobMode) ToStringPtrOutputWithContext added in v0.29.0 

func (e JobMode) ToStringPtrOutputWithContext(ctx context.Context) pulumi.StringPtrOutput

type JobModeInput added in v0.29.0 

type JobModeInput interface {
	pulumi.Input

	ToJobModeOutput() JobModeOutput
	ToJobModeOutputWithContext(context.Context) JobModeOutput
}

JobModeInput is an input type that accepts values of the JobMode enum A concrete instance of `JobModeInput` can be one of the following: 

JobModeProcessingModeUnspecified
JobModeProcessingModeInteractive
JobModeProcessingModeBatch

type JobModeOutput added in v0.29.0 

type JobModeOutput struct{ *pulumi.OutputState }

func (JobModeOutput) ElementType added in v0.29.0 

func (JobModeOutput) ElementType() reflect.Type

func (JobModeOutput) ToJobModeOutput added in v0.29.0 

func (o JobModeOutput) ToJobModeOutput() JobModeOutput

func (JobModeOutput) ToJobModeOutputWithContext added in v0.29.0 

func (o JobModeOutput) ToJobModeOutputWithContext(ctx context.Context) JobModeOutput

func (JobModeOutput) ToJobModePtrOutput added in v0.29.0 

func (o JobModeOutput) ToJobModePtrOutput() JobModePtrOutput

func (JobModeOutput) ToJobModePtrOutputWithContext added in v0.29.0 

func (o JobModeOutput) ToJobModePtrOutputWithContext(ctx context.Context) JobModePtrOutput

func (JobModeOutput) ToStringOutput added in v0.29.0 

func (o JobModeOutput) ToStringOutput() pulumi.StringOutput

func (JobModeOutput) ToStringOutputWithContext added in v0.29.0 

func (o JobModeOutput) ToStringOutputWithContext(ctx context.Context) pulumi.StringOutput

func (JobModeOutput) ToStringPtrOutput added in v0.29.0 

func (o JobModeOutput) ToStringPtrOutput() pulumi.StringPtrOutput

func (JobModeOutput) ToStringPtrOutputWithContext added in v0.29.0 

func (o JobModeOutput) ToStringPtrOutputWithContext(ctx context.Context) pulumi.StringPtrOutput

type JobModePtrInput added in v0.29.0 

type JobModePtrInput interface {
	pulumi.Input

	ToJobModePtrOutput() JobModePtrOutput
	ToJobModePtrOutputWithContext(context.Context) JobModePtrOutput
}

func JobModePtr added in v0.29.0 

func JobModePtr(v string) JobModePtrInput

type JobModePtrOutput added in v0.29.0 

type JobModePtrOutput struct{ *pulumi.OutputState }

func (JobModePtrOutput) Elem added in v0.29.0 

func (o JobModePtrOutput) Elem() JobModeOutput

func (JobModePtrOutput) ElementType added in v0.29.0 

func (JobModePtrOutput) ElementType() reflect.Type

func (JobModePtrOutput) ToJobModePtrOutput added in v0.29.0 

func (o JobModePtrOutput) ToJobModePtrOutput() JobModePtrOutput

func (JobModePtrOutput) ToJobModePtrOutputWithContext added in v0.29.0 

func (o JobModePtrOutput) ToJobModePtrOutputWithContext(ctx context.Context) JobModePtrOutput

func (JobModePtrOutput) ToStringPtrOutput added in v0.29.0 

func (o JobModePtrOutput) ToStringPtrOutput() pulumi.StringPtrOutput

func (JobModePtrOutput) ToStringPtrOutputWithContext added in v0.29.0 

func (o JobModePtrOutput) ToStringPtrOutputWithContext(ctx context.Context) pulumi.StringPtrOutput

type JobOptimization added in v0.32.0 

type JobOptimization string

Optional. The optimization strategy of the job. The default is `AUTODETECT`.

func (JobOptimization) ElementType added in v0.32.0 

func (JobOptimization) ElementType() reflect.Type

func (JobOptimization) ToJobOptimizationOutput added in v0.32.0 

func (e JobOptimization) ToJobOptimizationOutput() JobOptimizationOutput

func (JobOptimization) ToJobOptimizationOutputWithContext added in v0.32.0 

func (e JobOptimization) ToJobOptimizationOutputWithContext(ctx context.Context) JobOptimizationOutput

func (JobOptimization) ToJobOptimizationPtrOutput added in v0.32.0 

func (e JobOptimization) ToJobOptimizationPtrOutput() JobOptimizationPtrOutput

func (JobOptimization) ToJobOptimizationPtrOutputWithContext added in v0.32.0 

func (e JobOptimization) ToJobOptimizationPtrOutputWithContext(ctx context.Context) JobOptimizationPtrOutput

func (JobOptimization) ToStringOutput added in v0.32.0 

func (e JobOptimization) ToStringOutput() pulumi.StringOutput

func (JobOptimization) ToStringOutputWithContext added in v0.32.0 

func (e JobOptimization) ToStringOutputWithContext(ctx context.Context) pulumi.StringOutput

func (JobOptimization) ToStringPtrOutput added in v0.32.0 

func (e JobOptimization) ToStringPtrOutput() pulumi.StringPtrOutput

func (JobOptimization) ToStringPtrOutputWithContext added in v0.32.0 

func (e JobOptimization) ToStringPtrOutputWithContext(ctx context.Context) pulumi.StringPtrOutput

type JobOptimizationInput added in v0.32.0 

type JobOptimizationInput interface {
	pulumi.Input

	ToJobOptimizationOutput() JobOptimizationOutput
	ToJobOptimizationOutputWithContext(context.Context) JobOptimizationOutput
}

JobOptimizationInput is an input type that accepts values of the JobOptimization enum A concrete instance of `JobOptimizationInput` can be one of the following: 

JobOptimizationOptimizationStrategyUnspecified
JobOptimizationAutodetect
JobOptimizationDisabled

type JobOptimizationOutput added in v0.32.0 

type JobOptimizationOutput struct{ *pulumi.OutputState }

func (JobOptimizationOutput) ElementType added in v0.32.0 

func (JobOptimizationOutput) ElementType() reflect.Type

func (JobOptimizationOutput) ToJobOptimizationOutput added in v0.32.0 

func (o JobOptimizationOutput) ToJobOptimizationOutput() JobOptimizationOutput

func (JobOptimizationOutput) ToJobOptimizationOutputWithContext added in v0.32.0 

func (o JobOptimizationOutput) ToJobOptimizationOutputWithContext(ctx context.Context) JobOptimizationOutput

func (JobOptimizationOutput) ToJobOptimizationPtrOutput added in v0.32.0 

func (o JobOptimizationOutput) ToJobOptimizationPtrOutput() JobOptimizationPtrOutput

func (JobOptimizationOutput) ToJobOptimizationPtrOutputWithContext added in v0.32.0 

func (o JobOptimizationOutput) ToJobOptimizationPtrOutputWithContext(ctx context.Context) JobOptimizationPtrOutput

func (JobOptimizationOutput) ToStringOutput added in v0.32.0 

func (o JobOptimizationOutput) ToStringOutput() pulumi.StringOutput

func (JobOptimizationOutput) ToStringOutputWithContext added in v0.32.0 

func (o JobOptimizationOutput) ToStringOutputWithContext(ctx context.Context) pulumi.StringOutput

func (JobOptimizationOutput) ToStringPtrOutput added in v0.32.0 

func (o JobOptimizationOutput) ToStringPtrOutput() pulumi.StringPtrOutput

func (JobOptimizationOutput) ToStringPtrOutputWithContext added in v0.32.0 

func (o JobOptimizationOutput) ToStringPtrOutputWithContext(ctx context.Context) pulumi.StringPtrOutput

type JobOptimizationPtrInput added in v0.32.0 

type JobOptimizationPtrInput interface {
	pulumi.Input

	ToJobOptimizationPtrOutput() JobOptimizationPtrOutput
	ToJobOptimizationPtrOutputWithContext(context.Context) JobOptimizationPtrOutput
}

func JobOptimizationPtr added in v0.32.0 

func JobOptimizationPtr(v string) JobOptimizationPtrInput

type JobOptimizationPtrOutput added in v0.32.0 

type JobOptimizationPtrOutput struct{ *pulumi.OutputState }

func (JobOptimizationPtrOutput) Elem added in v0.32.0 

func (o JobOptimizationPtrOutput) Elem() JobOptimizationOutput

func (JobOptimizationPtrOutput) ElementType added in v0.32.0 

func (JobOptimizationPtrOutput) ElementType() reflect.Type

func (JobOptimizationPtrOutput) ToJobOptimizationPtrOutput added in v0.32.0 

func (o JobOptimizationPtrOutput) ToJobOptimizationPtrOutput() JobOptimizationPtrOutput

func (JobOptimizationPtrOutput) ToJobOptimizationPtrOutputWithContext added in v0.32.0 

func (o JobOptimizationPtrOutput) ToJobOptimizationPtrOutputWithContext(ctx context.Context) JobOptimizationPtrOutput

func (JobOptimizationPtrOutput) ToStringPtrOutput added in v0.32.0 

func (o JobOptimizationPtrOutput) ToStringPtrOutput() pulumi.StringPtrOutput

func (JobOptimizationPtrOutput) ToStringPtrOutputWithContext added in v0.32.0 

func (o JobOptimizationPtrOutput) ToStringPtrOutputWithContext(ctx context.Context) pulumi.StringPtrOutput

type JobOutput 

type JobOutput struct{ *pulumi.OutputState }

func (JobOutput) BatchModePriority added in v0.32.0 

func (o JobOutput) BatchModePriority() pulumi.IntOutput

The processing priority of a batch job. This field can only be set for batch mode jobs. The default value is 0. This value cannot be negative. Higher values correspond to higher priorities for the job.

func (JobOutput) Config added in v0.19.0 

func (o JobOutput) Config() JobConfigResponseOutput

The configuration for this job.

func (JobOutput) CreateTime added in v0.19.0 

func (o JobOutput) CreateTime() pulumi.StringOutput

The time the job was created.

func (JobOutput) ElementType 

func (JobOutput) ElementType() reflect.Type

func (JobOutput) EndTime added in v0.19.0 

func (o JobOutput) EndTime() pulumi.StringOutput

The time the transcoding finished.

func (JobOutput) Error added in v0.19.0 

func (o JobOutput) Error() StatusResponseOutput

An error object that describes the reason for the failure. This property is always present when ProcessingState is `FAILED`.

func (JobOutput) InputUri added in v0.19.0 

func (o JobOutput) InputUri() pulumi.StringOutput

Input only. Specify the `input_uri` to populate empty `uri` fields in each element of `Job.config.inputs` or `JobTemplate.config.inputs` when using template. URI of the media. Input files must be at least 5 seconds in duration and stored in Cloud Storage (for example, `gs://bucket/inputs/file.mp4`). See [Supported input and output formats](https://cloud.google.com/transcoder/docs/concepts/supported-input-and-output-formats).

func (JobOutput) Labels added in v0.21.0 

func (o JobOutput) Labels() pulumi.StringMapOutput

The labels associated with this job. You can use these to organize and group your jobs.

func (JobOutput) Location added in v0.21.0 

func (o JobOutput) Location() pulumi.StringOutput

func (JobOutput) Mode added in v0.29.0 

func (o JobOutput) Mode() pulumi.StringOutput

The processing mode of the job. The default is `PROCESSING_MODE_INTERACTIVE`.

func (JobOutput) Name added in v0.19.0 

func (o JobOutput) Name() pulumi.StringOutput

The resource name of the job. Format: `projects/{project_number}/locations/{location}/jobs/{job}`

func (JobOutput) Optimization added in v0.32.0 

func (o JobOutput) Optimization() pulumi.StringOutput

Optional. The optimization strategy of the job. The default is `AUTODETECT`.

func (JobOutput) OutputUri added in v0.19.0 

func (o JobOutput) OutputUri() pulumi.StringOutput

Input only. Specify the `output_uri` to populate an empty `Job.config.output.uri` or `JobTemplate.config.output.uri` when using template. URI for the output file(s). For example, `gs://my-bucket/outputs/`. See [Supported input and output formats](https://cloud.google.com/transcoder/docs/concepts/supported-input-and-output-formats).

func (JobOutput) Project added in v0.21.0 

func (o JobOutput) Project() pulumi.StringOutput

func (JobOutput) StartTime added in v0.19.0 

func (o JobOutput) StartTime() pulumi.StringOutput

The time the transcoding started.

func (JobOutput) State added in v0.19.0 

func (o JobOutput) State() pulumi.StringOutput

The current state of the job.

func (JobOutput) TemplateId added in v0.19.0 

func (o JobOutput) TemplateId() pulumi.StringOutput

Input only. Specify the `template_id` to use for populating `Job.config`. The default is `preset/web-hd`, which is the only supported preset. User defined JobTemplate: `{job_template_id}`

func (JobOutput) ToJobOutput 

func (o JobOutput) ToJobOutput() JobOutput

func (JobOutput) ToJobOutputWithContext 

func (o JobOutput) ToJobOutputWithContext(ctx context.Context) JobOutput

func (JobOutput) TtlAfterCompletionDays added in v0.19.0 

func (o JobOutput) TtlAfterCompletionDays() pulumi.IntOutput

Job time to live value in days, which will be effective after job completion. Job should be deleted automatically after the given TTL. Enter a value between 1 and 90. The default is 30.

type JobState 

type JobState struct {
}

func (JobState) ElementType 

func (JobState) ElementType() reflect.Type

type JobTemplate 

type JobTemplate struct {
	pulumi.CustomResourceState

	// The configuration for this template.
	Config JobConfigResponseOutput `pulumi:"config"`
	// Required. The ID to use for the job template, which will become the final component of the job template's resource name. This value should be 4-63 characters, and valid characters must match the regular expression `a-zA-Z*`.
	JobTemplateId pulumi.StringOutput `pulumi:"jobTemplateId"`
	// The labels associated with this job template. You can use these to organize and group your job templates.
	Labels   pulumi.StringMapOutput `pulumi:"labels"`
	Location pulumi.StringOutput    `pulumi:"location"`
	// The resource name of the job template. Format: `projects/{project_number}/locations/{location}/jobTemplates/{job_template}`
	Name    pulumi.StringOutput `pulumi:"name"`
	Project pulumi.StringOutput `pulumi:"project"`
}

Creates a job template in the specified region.

func GetJobTemplate 

func GetJobTemplate(ctx *pulumi.Context,
	name string, id pulumi.IDInput, state *JobTemplateState, opts ...pulumi.ResourceOption) (*JobTemplate, error)

GetJobTemplate gets an existing JobTemplate resource's state with the given name, ID, and optional state properties that are used to uniquely qualify the lookup (nil if not required).

func NewJobTemplate 

func NewJobTemplate(ctx *pulumi.Context,
	name string, args *JobTemplateArgs, opts ...pulumi.ResourceOption) (*JobTemplate, error)

NewJobTemplate registers a new resource with the given unique name, arguments, and options.

func (*JobTemplate) ElementType 

func (*JobTemplate) ElementType() reflect.Type

func (*JobTemplate) ToJobTemplateOutput 

func (i *JobTemplate) ToJobTemplateOutput() JobTemplateOutput

func (*JobTemplate) ToJobTemplateOutputWithContext 

func (i *JobTemplate) ToJobTemplateOutputWithContext(ctx context.Context) JobTemplateOutput

type JobTemplateArgs 

type JobTemplateArgs struct {
	// The configuration for this template.
	Config JobConfigPtrInput
	// Required. The ID to use for the job template, which will become the final component of the job template's resource name. This value should be 4-63 characters, and valid characters must match the regular expression `a-zA-Z*`.
	JobTemplateId pulumi.StringInput
	// The labels associated with this job template. You can use these to organize and group your job templates.
	Labels   pulumi.StringMapInput
	Location pulumi.StringPtrInput
	// The resource name of the job template. Format: `projects/{project_number}/locations/{location}/jobTemplates/{job_template}`
	Name    pulumi.StringPtrInput
	Project pulumi.StringPtrInput
}

The set of arguments for constructing a JobTemplate resource.

func (JobTemplateArgs) ElementType 

func (JobTemplateArgs) ElementType() reflect.Type

type JobTemplateInput 

type JobTemplateInput interface {
	pulumi.Input

	ToJobTemplateOutput() JobTemplateOutput
	ToJobTemplateOutputWithContext(ctx context.Context) JobTemplateOutput
}

type JobTemplateOutput 

type JobTemplateOutput struct{ *pulumi.OutputState }

func (JobTemplateOutput) Config added in v0.19.0 

func (o JobTemplateOutput) Config() JobConfigResponseOutput

The configuration for this template.

func (JobTemplateOutput) ElementType 

func (JobTemplateOutput) ElementType() reflect.Type

func (JobTemplateOutput) JobTemplateId added in v0.21.0 

func (o JobTemplateOutput) JobTemplateId() pulumi.StringOutput

Required. The ID to use for the job template, which will become the final component of the job template's resource name. This value should be 4-63 characters, and valid characters must match the regular expression `a-zA-Z*`.

func (JobTemplateOutput) Labels added in v0.21.0 

func (o JobTemplateOutput) Labels() pulumi.StringMapOutput

The labels associated with this job template. You can use these to organize and group your job templates.

func (JobTemplateOutput) Location added in v0.21.0 

func (o JobTemplateOutput) Location() pulumi.StringOutput

func (JobTemplateOutput) Name added in v0.19.0 

func (o JobTemplateOutput) Name() pulumi.StringOutput

The resource name of the job template. Format: `projects/{project_number}/locations/{location}/jobTemplates/{job_template}`

func (JobTemplateOutput) Project added in v0.21.0 

func (o JobTemplateOutput) Project() pulumi.StringOutput

func (JobTemplateOutput) ToJobTemplateOutput 

func (o JobTemplateOutput) ToJobTemplateOutput() JobTemplateOutput

func (JobTemplateOutput) ToJobTemplateOutputWithContext 

func (o JobTemplateOutput) ToJobTemplateOutputWithContext(ctx context.Context) JobTemplateOutput

type JobTemplateState 

type JobTemplateState struct {
}

func (JobTemplateState) ElementType 

func (JobTemplateState) ElementType() reflect.Type

type LookupJobArgs 

type LookupJobArgs struct {
	JobId    string  `pulumi:"jobId"`
	Location string  `pulumi:"location"`
	Project  *string `pulumi:"project"`
}

type LookupJobOutputArgs 

type LookupJobOutputArgs struct {
	JobId    pulumi.StringInput    `pulumi:"jobId"`
	Location pulumi.StringInput    `pulumi:"location"`
	Project  pulumi.StringPtrInput `pulumi:"project"`
}

func (LookupJobOutputArgs) ElementType 

func (LookupJobOutputArgs) ElementType() reflect.Type

type LookupJobResult 

type LookupJobResult struct {
	// The processing priority of a batch job. This field can only be set for batch mode jobs. The default value is 0. This value cannot be negative. Higher values correspond to higher priorities for the job.
	BatchModePriority int `pulumi:"batchModePriority"`
	// The configuration for this job.
	Config JobConfigResponse `pulumi:"config"`
	// The time the job was created.
	CreateTime string `pulumi:"createTime"`
	// The time the transcoding finished.
	EndTime string `pulumi:"endTime"`
	// An error object that describes the reason for the failure. This property is always present when ProcessingState is `FAILED`.
	Error StatusResponse `pulumi:"error"`
	// Input only. Specify the `input_uri` to populate empty `uri` fields in each element of `Job.config.inputs` or `JobTemplate.config.inputs` when using template. URI of the media. Input files must be at least 5 seconds in duration and stored in Cloud Storage (for example, `gs://bucket/inputs/file.mp4`). See [Supported input and output formats](https://cloud.google.com/transcoder/docs/concepts/supported-input-and-output-formats).
	InputUri string `pulumi:"inputUri"`
	// The labels associated with this job. You can use these to organize and group your jobs.
	Labels map[string]string `pulumi:"labels"`
	// The processing mode of the job. The default is `PROCESSING_MODE_INTERACTIVE`.
	Mode string `pulumi:"mode"`
	// The resource name of the job. Format: `projects/{project_number}/locations/{location}/jobs/{job}`
	Name string `pulumi:"name"`
	// Optional. The optimization strategy of the job. The default is `AUTODETECT`.
	Optimization string `pulumi:"optimization"`
	// Input only. Specify the `output_uri` to populate an empty `Job.config.output.uri` or `JobTemplate.config.output.uri` when using template. URI for the output file(s). For example, `gs://my-bucket/outputs/`. See [Supported input and output formats](https://cloud.google.com/transcoder/docs/concepts/supported-input-and-output-formats).
	OutputUri string `pulumi:"outputUri"`
	// The time the transcoding started.
	StartTime string `pulumi:"startTime"`
	// The current state of the job.
	State string `pulumi:"state"`
	// Input only. Specify the `template_id` to use for populating `Job.config`. The default is `preset/web-hd`, which is the only supported preset. User defined JobTemplate: `{job_template_id}`
	TemplateId string `pulumi:"templateId"`
	// Job time to live value in days, which will be effective after job completion. Job should be deleted automatically after the given TTL. Enter a value between 1 and 90. The default is 30.
	TtlAfterCompletionDays int `pulumi:"ttlAfterCompletionDays"`
}

func LookupJob 

func LookupJob(ctx *pulumi.Context, args *LookupJobArgs, opts ...pulumi.InvokeOption) (*LookupJobResult, error)

Returns the job data.

type LookupJobResultOutput 

type LookupJobResultOutput struct{ *pulumi.OutputState }

func LookupJobOutput 

func LookupJobOutput(ctx *pulumi.Context, args LookupJobOutputArgs, opts ...pulumi.InvokeOption) LookupJobResultOutput

func (LookupJobResultOutput) BatchModePriority added in v0.32.0 

func (o LookupJobResultOutput) BatchModePriority() pulumi.IntOutput

The processing priority of a batch job. This field can only be set for batch mode jobs. The default value is 0. This value cannot be negative. Higher values correspond to higher priorities for the job.

func (LookupJobResultOutput) Config 

func (o LookupJobResultOutput) Config() JobConfigResponseOutput

The configuration for this job.

func (LookupJobResultOutput) CreateTime 

func (o LookupJobResultOutput) CreateTime() pulumi.StringOutput

The time the job was created.

func (LookupJobResultOutput) ElementType 

func (LookupJobResultOutput) ElementType() reflect.Type

func (LookupJobResultOutput) EndTime 

func (o LookupJobResultOutput) EndTime() pulumi.StringOutput

The time the transcoding finished.

func (LookupJobResultOutput) Error 

func (o LookupJobResultOutput) Error() StatusResponseOutput

An error object that describes the reason for the failure. This property is always present when ProcessingState is `FAILED`.

func (LookupJobResultOutput) InputUri 

func (o LookupJobResultOutput) InputUri() pulumi.StringOutput

Input only. Specify the `input_uri` to populate empty `uri` fields in each element of `Job.config.inputs` or `JobTemplate.config.inputs` when using template. URI of the media. Input files must be at least 5 seconds in duration and stored in Cloud Storage (for example, `gs://bucket/inputs/file.mp4`). See [Supported input and output formats](https://cloud.google.com/transcoder/docs/concepts/supported-input-and-output-formats).

func (LookupJobResultOutput) Labels added in v0.21.0 

func (o LookupJobResultOutput) Labels() pulumi.StringMapOutput

The labels associated with this job. You can use these to organize and group your jobs.

func (LookupJobResultOutput) Mode added in v0.29.0 

func (o LookupJobResultOutput) Mode() pulumi.StringOutput

The processing mode of the job. The default is `PROCESSING_MODE_INTERACTIVE`.

func (LookupJobResultOutput) Name 

func (o LookupJobResultOutput) Name() pulumi.StringOutput

The resource name of the job. Format: `projects/{project_number}/locations/{location}/jobs/{job}`

func (LookupJobResultOutput) Optimization added in v0.32.0 

func (o LookupJobResultOutput) Optimization() pulumi.StringOutput

Optional. The optimization strategy of the job. The default is `AUTODETECT`.

func (LookupJobResultOutput) OutputUri 

func (o LookupJobResultOutput) OutputUri() pulumi.StringOutput

Input only. Specify the `output_uri` to populate an empty `Job.config.output.uri` or `JobTemplate.config.output.uri` when using template. URI for the output file(s). For example, `gs://my-bucket/outputs/`. See [Supported input and output formats](https://cloud.google.com/transcoder/docs/concepts/supported-input-and-output-formats).

func (LookupJobResultOutput) StartTime 

func (o LookupJobResultOutput) StartTime() pulumi.StringOutput

The time the transcoding started.

func (LookupJobResultOutput) State 

func (o LookupJobResultOutput) State() pulumi.StringOutput

The current state of the job.

func (LookupJobResultOutput) TemplateId 

func (o LookupJobResultOutput) TemplateId() pulumi.StringOutput

Input only. Specify the `template_id` to use for populating `Job.config`. The default is `preset/web-hd`, which is the only supported preset. User defined JobTemplate: `{job_template_id}`

func (LookupJobResultOutput) ToLookupJobResultOutput 

func (o LookupJobResultOutput) ToLookupJobResultOutput() LookupJobResultOutput

func (LookupJobResultOutput) ToLookupJobResultOutputWithContext 

func (o LookupJobResultOutput) ToLookupJobResultOutputWithContext(ctx context.Context) LookupJobResultOutput

func (LookupJobResultOutput) TtlAfterCompletionDays 

func (o LookupJobResultOutput) TtlAfterCompletionDays() pulumi.IntOutput

Job time to live value in days, which will be effective after job completion. Job should be deleted automatically after the given TTL. Enter a value between 1 and 90. The default is 30.

type LookupJobTemplateArgs 

type LookupJobTemplateArgs struct {
	JobTemplateId string  `pulumi:"jobTemplateId"`
	Location      string  `pulumi:"location"`
	Project       *string `pulumi:"project"`
}

type LookupJobTemplateOutputArgs 

type LookupJobTemplateOutputArgs struct {
	JobTemplateId pulumi.StringInput    `pulumi:"jobTemplateId"`
	Location      pulumi.StringInput    `pulumi:"location"`
	Project       pulumi.StringPtrInput `pulumi:"project"`
}

func (LookupJobTemplateOutputArgs) ElementType 

func (LookupJobTemplateOutputArgs) ElementType() reflect.Type

type LookupJobTemplateResult 

type LookupJobTemplateResult struct {
	// The configuration for this template.
	Config JobConfigResponse `pulumi:"config"`
	// The labels associated with this job template. You can use these to organize and group your job templates.
	Labels map[string]string `pulumi:"labels"`
	// The resource name of the job template. Format: `projects/{project_number}/locations/{location}/jobTemplates/{job_template}`
	Name string `pulumi:"name"`
}

func LookupJobTemplate 

func LookupJobTemplate(ctx *pulumi.Context, args *LookupJobTemplateArgs, opts ...pulumi.InvokeOption) (*LookupJobTemplateResult, error)

Returns the job template data.

type LookupJobTemplateResultOutput 

type LookupJobTemplateResultOutput struct{ *pulumi.OutputState }

func LookupJobTemplateOutput 

func LookupJobTemplateOutput(ctx *pulumi.Context, args LookupJobTemplateOutputArgs, opts ...pulumi.InvokeOption) LookupJobTemplateResultOutput

func (LookupJobTemplateResultOutput) Config 

func (o LookupJobTemplateResultOutput) Config() JobConfigResponseOutput

The configuration for this template.

func (LookupJobTemplateResultOutput) ElementType 

func (LookupJobTemplateResultOutput) ElementType() reflect.Type

func (LookupJobTemplateResultOutput) Labels added in v0.21.0 

func (o LookupJobTemplateResultOutput) Labels() pulumi.StringMapOutput

The labels associated with this job template. You can use these to organize and group your job templates.

func (LookupJobTemplateResultOutput) Name 

func (o LookupJobTemplateResultOutput) Name() pulumi.StringOutput

The resource name of the job template. Format: `projects/{project_number}/locations/{location}/jobTemplates/{job_template}`

func (LookupJobTemplateResultOutput) ToLookupJobTemplateResultOutput 

func (o LookupJobTemplateResultOutput) ToLookupJobTemplateResultOutput() LookupJobTemplateResultOutput

func (LookupJobTemplateResultOutput) ToLookupJobTemplateResultOutputWithContext 

func (o LookupJobTemplateResultOutput) ToLookupJobTemplateResultOutputWithContext(ctx context.Context) LookupJobTemplateResultOutput

type Manifest 

type Manifest struct {
	// `DASH` manifest configuration.
	Dash *DashConfig `pulumi:"dash"`
	// The name of the generated file. The default is `manifest` with the extension suffix corresponding to the Manifest.type.
	FileName *string `pulumi:"fileName"`
	// List of user supplied MuxStream.key values that should appear in this manifest. When Manifest.type is `HLS`, a media manifest with name MuxStream.key and `.m3u8` extension is generated for each element in this list.
	MuxStreams []string `pulumi:"muxStreams"`
	// Type of the manifest.
	Type ManifestType `pulumi:"type"`
}

Manifest configuration.

type ManifestArgs 

type ManifestArgs struct {
	// `DASH` manifest configuration.
	Dash DashConfigPtrInput `pulumi:"dash"`
	// The name of the generated file. The default is `manifest` with the extension suffix corresponding to the Manifest.type.
	FileName pulumi.StringPtrInput `pulumi:"fileName"`
	// List of user supplied MuxStream.key values that should appear in this manifest. When Manifest.type is `HLS`, a media manifest with name MuxStream.key and `.m3u8` extension is generated for each element in this list.
	MuxStreams pulumi.StringArrayInput `pulumi:"muxStreams"`
	// Type of the manifest.
	Type ManifestTypeInput `pulumi:"type"`
}

Manifest configuration.

func (ManifestArgs) ElementType 

func (ManifestArgs) ElementType() reflect.Type

func (ManifestArgs) ToManifestOutput 

func (i ManifestArgs) ToManifestOutput() ManifestOutput

func (ManifestArgs) ToManifestOutputWithContext 

func (i ManifestArgs) ToManifestOutputWithContext(ctx context.Context) ManifestOutput

type ManifestArray 

type ManifestArray []ManifestInput

func (ManifestArray) ElementType 

func (ManifestArray) ElementType() reflect.Type

func (ManifestArray) ToManifestArrayOutput 

func (i ManifestArray) ToManifestArrayOutput() ManifestArrayOutput

func (ManifestArray) ToManifestArrayOutputWithContext 

func (i ManifestArray) ToManifestArrayOutputWithContext(ctx context.Context) ManifestArrayOutput

type ManifestArrayInput 

type ManifestArrayInput interface {
	pulumi.Input

	ToManifestArrayOutput() ManifestArrayOutput
	ToManifestArrayOutputWithContext(context.Context) ManifestArrayOutput
}

ManifestArrayInput is an input type that accepts ManifestArray and ManifestArrayOutput values. You can construct a concrete instance of `ManifestArrayInput` via: 

ManifestArray{ ManifestArgs{...} }

type ManifestArrayOutput 

type ManifestArrayOutput struct{ *pulumi.OutputState }

func (ManifestArrayOutput) ElementType 

func (ManifestArrayOutput) ElementType() reflect.Type

func (ManifestArrayOutput) Index 

func (o ManifestArrayOutput) Index(i pulumi.IntInput) ManifestOutput

func (ManifestArrayOutput) ToManifestArrayOutput 

func (o ManifestArrayOutput) ToManifestArrayOutput() ManifestArrayOutput

func (ManifestArrayOutput) ToManifestArrayOutputWithContext 

func (o ManifestArrayOutput) ToManifestArrayOutputWithContext(ctx context.Context) ManifestArrayOutput

type ManifestInput 

type ManifestInput interface {
	pulumi.Input

	ToManifestOutput() ManifestOutput
	ToManifestOutputWithContext(context.Context) ManifestOutput
}

ManifestInput is an input type that accepts ManifestArgs and ManifestOutput values. You can construct a concrete instance of `ManifestInput` via: 

ManifestArgs{...}

type ManifestOutput 

type ManifestOutput struct{ *pulumi.OutputState }

Manifest configuration.

func (ManifestOutput) Dash added in v0.32.0 

func (o ManifestOutput) Dash() DashConfigPtrOutput

`DASH` manifest configuration.

func (ManifestOutput) ElementType 

func (ManifestOutput) ElementType() reflect.Type

func (ManifestOutput) FileName 

func (o ManifestOutput) FileName() pulumi.StringPtrOutput

The name of the generated file. The default is `manifest` with the extension suffix corresponding to the Manifest.type.

func (ManifestOutput) MuxStreams 

func (o ManifestOutput) MuxStreams() pulumi.StringArrayOutput

List of user supplied MuxStream.key values that should appear in this manifest. When Manifest.type is `HLS`, a media manifest with name MuxStream.key and `.m3u8` extension is generated for each element in this list.

func (ManifestOutput) ToManifestOutput 

func (o ManifestOutput) ToManifestOutput() ManifestOutput

func (ManifestOutput) ToManifestOutputWithContext 

func (o ManifestOutput) ToManifestOutputWithContext(ctx context.Context) ManifestOutput

func (ManifestOutput) Type 

func (o ManifestOutput) Type() ManifestTypeOutput

Type of the manifest.

type ManifestResponse 

type ManifestResponse struct {
	// `DASH` manifest configuration.
	Dash DashConfigResponse `pulumi:"dash"`
	// The name of the generated file. The default is `manifest` with the extension suffix corresponding to the Manifest.type.
	FileName string `pulumi:"fileName"`
	// List of user supplied MuxStream.key values that should appear in this manifest. When Manifest.type is `HLS`, a media manifest with name MuxStream.key and `.m3u8` extension is generated for each element in this list.
	MuxStreams []string `pulumi:"muxStreams"`
	// Type of the manifest.
	Type string `pulumi:"type"`
}

Manifest configuration.

type ManifestResponseArrayOutput 

type ManifestResponseArrayOutput struct{ *pulumi.OutputState }

func (ManifestResponseArrayOutput) ElementType 

func (ManifestResponseArrayOutput) ElementType() reflect.Type

func (ManifestResponseArrayOutput) Index 

func (o ManifestResponseArrayOutput) Index(i pulumi.IntInput) ManifestResponseOutput

func (ManifestResponseArrayOutput) ToManifestResponseArrayOutput 

func (o ManifestResponseArrayOutput) ToManifestResponseArrayOutput() ManifestResponseArrayOutput

func (ManifestResponseArrayOutput) ToManifestResponseArrayOutputWithContext 

func (o ManifestResponseArrayOutput) ToManifestResponseArrayOutputWithContext(ctx context.Context) ManifestResponseArrayOutput

type ManifestResponseOutput 

type ManifestResponseOutput struct{ *pulumi.OutputState }

Manifest configuration.

func (ManifestResponseOutput) Dash added in v0.32.0 

func (o ManifestResponseOutput) Dash() DashConfigResponseOutput

`DASH` manifest configuration.

func (ManifestResponseOutput) ElementType 

func (ManifestResponseOutput) ElementType() reflect.Type

func (ManifestResponseOutput) FileName 

func (o ManifestResponseOutput) FileName() pulumi.StringOutput

The name of the generated file. The default is `manifest` with the extension suffix corresponding to the Manifest.type.

func (ManifestResponseOutput) MuxStreams 

func (o ManifestResponseOutput) MuxStreams() pulumi.StringArrayOutput

List of user supplied MuxStream.key values that should appear in this manifest. When Manifest.type is `HLS`, a media manifest with name MuxStream.key and `.m3u8` extension is generated for each element in this list.

func (ManifestResponseOutput) ToManifestResponseOutput 

func (o ManifestResponseOutput) ToManifestResponseOutput() ManifestResponseOutput

func (ManifestResponseOutput) ToManifestResponseOutputWithContext 

func (o ManifestResponseOutput) ToManifestResponseOutputWithContext(ctx context.Context) ManifestResponseOutput

func (ManifestResponseOutput) Type 

func (o ManifestResponseOutput) Type() pulumi.StringOutput

Type of the manifest.

type ManifestType 

type ManifestType string

Required. Type of the manifest.

func (ManifestType) ElementType 

func (ManifestType) ElementType() reflect.Type

func (ManifestType) ToManifestTypeOutput 

func (e ManifestType) ToManifestTypeOutput() ManifestTypeOutput

func (ManifestType) ToManifestTypeOutputWithContext 

func (e ManifestType) ToManifestTypeOutputWithContext(ctx context.Context) ManifestTypeOutput

func (ManifestType) ToManifestTypePtrOutput 

func (e ManifestType) ToManifestTypePtrOutput() ManifestTypePtrOutput

func (ManifestType) ToManifestTypePtrOutputWithContext 

func (e ManifestType) ToManifestTypePtrOutputWithContext(ctx context.Context) ManifestTypePtrOutput

func (ManifestType) ToStringOutput 

func (e ManifestType) ToStringOutput() pulumi.StringOutput

func (ManifestType) ToStringOutputWithContext 

func (e ManifestType) ToStringOutputWithContext(ctx context.Context) pulumi.StringOutput

func (ManifestType) ToStringPtrOutput 

func (e ManifestType) ToStringPtrOutput() pulumi.StringPtrOutput

func (ManifestType) ToStringPtrOutputWithContext 

func (e ManifestType) ToStringPtrOutputWithContext(ctx context.Context) pulumi.StringPtrOutput

type ManifestTypeInput 

type ManifestTypeInput interface {
	pulumi.Input

	ToManifestTypeOutput() ManifestTypeOutput
	ToManifestTypeOutputWithContext(context.Context) ManifestTypeOutput
}

ManifestTypeInput is an input type that accepts values of the ManifestType enum A concrete instance of `ManifestTypeInput` can be one of the following: 

ManifestTypeManifestTypeUnspecified
ManifestTypeHls
ManifestTypeDash

type ManifestTypeOutput 

type ManifestTypeOutput struct{ *pulumi.OutputState }

func (ManifestTypeOutput) ElementType 

func (ManifestTypeOutput) ElementType() reflect.Type

func (ManifestTypeOutput) ToManifestTypeOutput 

func (o ManifestTypeOutput) ToManifestTypeOutput() ManifestTypeOutput

func (ManifestTypeOutput) ToManifestTypeOutputWithContext 

func (o ManifestTypeOutput) ToManifestTypeOutputWithContext(ctx context.Context) ManifestTypeOutput

func (ManifestTypeOutput) ToManifestTypePtrOutput 

func (o ManifestTypeOutput) ToManifestTypePtrOutput() ManifestTypePtrOutput

func (ManifestTypeOutput) ToManifestTypePtrOutputWithContext 

func (o ManifestTypeOutput) ToManifestTypePtrOutputWithContext(ctx context.Context) ManifestTypePtrOutput

func (ManifestTypeOutput) ToStringOutput 

func (o ManifestTypeOutput) ToStringOutput() pulumi.StringOutput

func (ManifestTypeOutput) ToStringOutputWithContext 

func (o ManifestTypeOutput) ToStringOutputWithContext(ctx context.Context) pulumi.StringOutput

func (ManifestTypeOutput) ToStringPtrOutput 

func (o ManifestTypeOutput) ToStringPtrOutput() pulumi.StringPtrOutput

func (ManifestTypeOutput) ToStringPtrOutputWithContext 

func (o ManifestTypeOutput) ToStringPtrOutputWithContext(ctx context.Context) pulumi.StringPtrOutput

type ManifestTypePtrInput 

type ManifestTypePtrInput interface {
	pulumi.Input

	ToManifestTypePtrOutput() ManifestTypePtrOutput
	ToManifestTypePtrOutputWithContext(context.Context) ManifestTypePtrOutput
}

func ManifestTypePtr 

func ManifestTypePtr(v string) ManifestTypePtrInput

type ManifestTypePtrOutput 

type ManifestTypePtrOutput struct{ *pulumi.OutputState }

func (ManifestTypePtrOutput) Elem 

func (o ManifestTypePtrOutput) Elem() ManifestTypeOutput

func (ManifestTypePtrOutput) ElementType 

func (ManifestTypePtrOutput) ElementType() reflect.Type

func (ManifestTypePtrOutput) ToManifestTypePtrOutput 

func (o ManifestTypePtrOutput) ToManifestTypePtrOutput() ManifestTypePtrOutput

func (ManifestTypePtrOutput) ToManifestTypePtrOutputWithContext 

func (o ManifestTypePtrOutput) ToManifestTypePtrOutputWithContext(ctx context.Context) ManifestTypePtrOutput

func (ManifestTypePtrOutput) ToStringPtrOutput 

func (o ManifestTypePtrOutput) ToStringPtrOutput() pulumi.StringPtrOutput

func (ManifestTypePtrOutput) ToStringPtrOutputWithContext 

func (o ManifestTypePtrOutput) ToStringPtrOutputWithContext(ctx context.Context) pulumi.StringPtrOutput

type MpegCommonEncryption added in v0.32.0 

type MpegCommonEncryption struct {
	// Specify the encryption scheme. Supported encryption schemes: - `cenc` - `cbcs`
	Scheme string `pulumi:"scheme"`
}

Configuration for MPEG Common Encryption (MPEG-CENC).

type MpegCommonEncryptionArgs added in v0.32.0 

type MpegCommonEncryptionArgs struct {
	// Specify the encryption scheme. Supported encryption schemes: - `cenc` - `cbcs`
	Scheme pulumi.StringInput `pulumi:"scheme"`
}

Configuration for MPEG Common Encryption (MPEG-CENC).

func (MpegCommonEncryptionArgs) ElementType added in v0.32.0 

func (MpegCommonEncryptionArgs) ElementType() reflect.Type

func (MpegCommonEncryptionArgs) ToMpegCommonEncryptionOutput added in v0.32.0 

func (i MpegCommonEncryptionArgs) ToMpegCommonEncryptionOutput() MpegCommonEncryptionOutput

func (MpegCommonEncryptionArgs) ToMpegCommonEncryptionOutputWithContext added in v0.32.0 

func (i MpegCommonEncryptionArgs) ToMpegCommonEncryptionOutputWithContext(ctx context.Context) MpegCommonEncryptionOutput

func (MpegCommonEncryptionArgs) ToMpegCommonEncryptionPtrOutput added in v0.32.0 

func (i MpegCommonEncryptionArgs) ToMpegCommonEncryptionPtrOutput() MpegCommonEncryptionPtrOutput

func (MpegCommonEncryptionArgs) ToMpegCommonEncryptionPtrOutputWithContext added in v0.32.0 

func (i MpegCommonEncryptionArgs) ToMpegCommonEncryptionPtrOutputWithContext(ctx context.Context) MpegCommonEncryptionPtrOutput

type MpegCommonEncryptionInput added in v0.32.0 

type MpegCommonEncryptionInput interface {
	pulumi.Input

	ToMpegCommonEncryptionOutput() MpegCommonEncryptionOutput
	ToMpegCommonEncryptionOutputWithContext(context.Context) MpegCommonEncryptionOutput
}

MpegCommonEncryptionInput is an input type that accepts MpegCommonEncryptionArgs and MpegCommonEncryptionOutput values. You can construct a concrete instance of `MpegCommonEncryptionInput` via: 

MpegCommonEncryptionArgs{...}

type MpegCommonEncryptionOutput added in v0.32.0 

type MpegCommonEncryptionOutput struct{ *pulumi.OutputState }

Configuration for MPEG Common Encryption (MPEG-CENC).

func (MpegCommonEncryptionOutput) ElementType added in v0.32.0 

func (MpegCommonEncryptionOutput) ElementType() reflect.Type

func (MpegCommonEncryptionOutput) Scheme added in v0.32.0 

func (o MpegCommonEncryptionOutput) Scheme() pulumi.StringOutput

Specify the encryption scheme. Supported encryption schemes: - `cenc` - `cbcs`

func (MpegCommonEncryptionOutput) ToMpegCommonEncryptionOutput added in v0.32.0 

func (o MpegCommonEncryptionOutput) ToMpegCommonEncryptionOutput() MpegCommonEncryptionOutput

func (MpegCommonEncryptionOutput) ToMpegCommonEncryptionOutputWithContext added in v0.32.0 

func (o MpegCommonEncryptionOutput) ToMpegCommonEncryptionOutputWithContext(ctx context.Context) MpegCommonEncryptionOutput

func (MpegCommonEncryptionOutput) ToMpegCommonEncryptionPtrOutput added in v0.32.0 

func (o MpegCommonEncryptionOutput) ToMpegCommonEncryptionPtrOutput() MpegCommonEncryptionPtrOutput

func (MpegCommonEncryptionOutput) ToMpegCommonEncryptionPtrOutputWithContext added in v0.32.0 

func (o MpegCommonEncryptionOutput) ToMpegCommonEncryptionPtrOutputWithContext(ctx context.Context) MpegCommonEncryptionPtrOutput

type MpegCommonEncryptionPtrInput added in v0.32.0 

type MpegCommonEncryptionPtrInput interface {
	pulumi.Input

	ToMpegCommonEncryptionPtrOutput() MpegCommonEncryptionPtrOutput
	ToMpegCommonEncryptionPtrOutputWithContext(context.Context) MpegCommonEncryptionPtrOutput
}

MpegCommonEncryptionPtrInput is an input type that accepts MpegCommonEncryptionArgs, MpegCommonEncryptionPtr and MpegCommonEncryptionPtrOutput values. You can construct a concrete instance of `MpegCommonEncryptionPtrInput` via: 

        MpegCommonEncryptionArgs{...}

or:

        nil

func MpegCommonEncryptionPtr added in v0.32.0 

func MpegCommonEncryptionPtr(v *MpegCommonEncryptionArgs) MpegCommonEncryptionPtrInput

type MpegCommonEncryptionPtrOutput added in v0.32.0 

type MpegCommonEncryptionPtrOutput struct{ *pulumi.OutputState }

func (MpegCommonEncryptionPtrOutput) Elem added in v0.32.0 

func (o MpegCommonEncryptionPtrOutput) Elem() MpegCommonEncryptionOutput

func (MpegCommonEncryptionPtrOutput) ElementType added in v0.32.0 

func (MpegCommonEncryptionPtrOutput) ElementType() reflect.Type

func (MpegCommonEncryptionPtrOutput) Scheme added in v0.32.0 

func (o MpegCommonEncryptionPtrOutput) Scheme() pulumi.StringPtrOutput

Specify the encryption scheme. Supported encryption schemes: - `cenc` - `cbcs`

func (MpegCommonEncryptionPtrOutput) ToMpegCommonEncryptionPtrOutput added in v0.32.0 

func (o MpegCommonEncryptionPtrOutput) ToMpegCommonEncryptionPtrOutput() MpegCommonEncryptionPtrOutput

func (MpegCommonEncryptionPtrOutput) ToMpegCommonEncryptionPtrOutputWithContext added in v0.32.0 

func (o MpegCommonEncryptionPtrOutput) ToMpegCommonEncryptionPtrOutputWithContext(ctx context.Context) MpegCommonEncryptionPtrOutput

type MpegCommonEncryptionResponse added in v0.32.0 

type MpegCommonEncryptionResponse struct {
	// Specify the encryption scheme. Supported encryption schemes: - `cenc` - `cbcs`
	Scheme string `pulumi:"scheme"`
}

Configuration for MPEG Common Encryption (MPEG-CENC).

type MpegCommonEncryptionResponseOutput added in v0.32.0 

type MpegCommonEncryptionResponseOutput struct{ *pulumi.OutputState }

Configuration for MPEG Common Encryption (MPEG-CENC).

func (MpegCommonEncryptionResponseOutput) ElementType added in v0.32.0 

func (MpegCommonEncryptionResponseOutput) ElementType() reflect.Type

func (MpegCommonEncryptionResponseOutput) Scheme added in v0.32.0 

func (o MpegCommonEncryptionResponseOutput) Scheme() pulumi.StringOutput

Specify the encryption scheme. Supported encryption schemes: - `cenc` - `cbcs`

func (MpegCommonEncryptionResponseOutput) ToMpegCommonEncryptionResponseOutput added in v0.32.0 

func (o MpegCommonEncryptionResponseOutput) ToMpegCommonEncryptionResponseOutput() MpegCommonEncryptionResponseOutput

func (MpegCommonEncryptionResponseOutput) ToMpegCommonEncryptionResponseOutputWithContext added in v0.32.0 

func (o MpegCommonEncryptionResponseOutput) ToMpegCommonEncryptionResponseOutputWithContext(ctx context.Context) MpegCommonEncryptionResponseOutput

type MuxStream 

type MuxStream struct {
	// The container format. The default is `mp4` Supported container formats: - `ts` - `fmp4`- the corresponding file extension is `.m4s` - `mp4` - `vtt` See also: [Supported input and output formats](https://cloud.google.com/transcoder/docs/concepts/supported-input-and-output-formats)
	Container *string `pulumi:"container"`
	// List of ElementaryStream.key values multiplexed in this stream.
	ElementaryStreams []string `pulumi:"elementaryStreams"`
	// Identifier of the encryption configuration to use. If omitted, output will be unencrypted.
	EncryptionId *string `pulumi:"encryptionId"`
	// The name of the generated file. The default is MuxStream.key with the extension suffix corresponding to the MuxStream.container. Individual segments also have an incremental 10-digit zero-padded suffix starting from 0 before the extension, such as `mux_stream0000000123.ts`.
	FileName *string `pulumi:"fileName"`
	// Optional. `fmp4` container configuration.
	Fmp4 *Fmp4Config `pulumi:"fmp4"`
	// A unique key for this multiplexed stream.
	Key *string `pulumi:"key"`
	// Segment settings for `ts`, `fmp4` and `vtt`.
	SegmentSettings *SegmentSettings `pulumi:"segmentSettings"`
}

Multiplexing settings for output stream.

type MuxStreamArgs 

type MuxStreamArgs struct {
	// The container format. The default is `mp4` Supported container formats: - `ts` - `fmp4`- the corresponding file extension is `.m4s` - `mp4` - `vtt` See also: [Supported input and output formats](https://cloud.google.com/transcoder/docs/concepts/supported-input-and-output-formats)
	Container pulumi.StringPtrInput `pulumi:"container"`
	// List of ElementaryStream.key values multiplexed in this stream.
	ElementaryStreams pulumi.StringArrayInput `pulumi:"elementaryStreams"`
	// Identifier of the encryption configuration to use. If omitted, output will be unencrypted.
	EncryptionId pulumi.StringPtrInput `pulumi:"encryptionId"`
	// The name of the generated file. The default is MuxStream.key with the extension suffix corresponding to the MuxStream.container. Individual segments also have an incremental 10-digit zero-padded suffix starting from 0 before the extension, such as `mux_stream0000000123.ts`.
	FileName pulumi.StringPtrInput `pulumi:"fileName"`
	// Optional. `fmp4` container configuration.
	Fmp4 Fmp4ConfigPtrInput `pulumi:"fmp4"`
	// A unique key for this multiplexed stream.
	Key pulumi.StringPtrInput `pulumi:"key"`
	// Segment settings for `ts`, `fmp4` and `vtt`.
	SegmentSettings SegmentSettingsPtrInput `pulumi:"segmentSettings"`
}

Multiplexing settings for output stream.

func (MuxStreamArgs) ElementType 

func (MuxStreamArgs) ElementType() reflect.Type

func (MuxStreamArgs) ToMuxStreamOutput 

func (i MuxStreamArgs) ToMuxStreamOutput() MuxStreamOutput

func (MuxStreamArgs) ToMuxStreamOutputWithContext 

func (i MuxStreamArgs) ToMuxStreamOutputWithContext(ctx context.Context) MuxStreamOutput

type MuxStreamArray 

type MuxStreamArray []MuxStreamInput

func (MuxStreamArray) ElementType 

func (MuxStreamArray) ElementType() reflect.Type

func (MuxStreamArray) ToMuxStreamArrayOutput 

func (i MuxStreamArray) ToMuxStreamArrayOutput() MuxStreamArrayOutput

func (MuxStreamArray) ToMuxStreamArrayOutputWithContext 

func (i MuxStreamArray) ToMuxStreamArrayOutputWithContext(ctx context.Context) MuxStreamArrayOutput

type MuxStreamArrayInput 

type MuxStreamArrayInput interface {
	pulumi.Input

	ToMuxStreamArrayOutput() MuxStreamArrayOutput
	ToMuxStreamArrayOutputWithContext(context.Context) MuxStreamArrayOutput
}

MuxStreamArrayInput is an input type that accepts MuxStreamArray and MuxStreamArrayOutput values. You can construct a concrete instance of `MuxStreamArrayInput` via: 

MuxStreamArray{ MuxStreamArgs{...} }

type MuxStreamArrayOutput 

type MuxStreamArrayOutput struct{ *pulumi.OutputState }

func (MuxStreamArrayOutput) ElementType 

func (MuxStreamArrayOutput) ElementType() reflect.Type

func (MuxStreamArrayOutput) Index 

func (o MuxStreamArrayOutput) Index(i pulumi.IntInput) MuxStreamOutput

func (MuxStreamArrayOutput) ToMuxStreamArrayOutput 

func (o MuxStreamArrayOutput) ToMuxStreamArrayOutput() MuxStreamArrayOutput

func (MuxStreamArrayOutput) ToMuxStreamArrayOutputWithContext 

func (o MuxStreamArrayOutput) ToMuxStreamArrayOutputWithContext(ctx context.Context) MuxStreamArrayOutput

type MuxStreamInput 

type MuxStreamInput interface {
	pulumi.Input

	ToMuxStreamOutput() MuxStreamOutput
	ToMuxStreamOutputWithContext(context.Context) MuxStreamOutput
}

MuxStreamInput is an input type that accepts MuxStreamArgs and MuxStreamOutput values. You can construct a concrete instance of `MuxStreamInput` via: 

MuxStreamArgs{...}

type MuxStreamOutput 

type MuxStreamOutput struct{ *pulumi.OutputState }

Multiplexing settings for output stream.

func (MuxStreamOutput) Container 

func (o MuxStreamOutput) Container() pulumi.StringPtrOutput

The container format. The default is `mp4` Supported container formats: - `ts` - `fmp4`- the corresponding file extension is `.m4s` - `mp4` - `vtt` See also: [Supported input and output formats](https://cloud.google.com/transcoder/docs/concepts/supported-input-and-output-formats)

func (MuxStreamOutput) ElementType 

func (MuxStreamOutput) ElementType() reflect.Type

func (MuxStreamOutput) ElementaryStreams 

func (o MuxStreamOutput) ElementaryStreams() pulumi.StringArrayOutput

List of ElementaryStream.key values multiplexed in this stream.

func (MuxStreamOutput) EncryptionId added in v0.32.0 

func (o MuxStreamOutput) EncryptionId() pulumi.StringPtrOutput

Identifier of the encryption configuration to use. If omitted, output will be unencrypted.

func (MuxStreamOutput) FileName 

func (o MuxStreamOutput) FileName() pulumi.StringPtrOutput

The name of the generated file. The default is MuxStream.key with the extension suffix corresponding to the MuxStream.container. Individual segments also have an incremental 10-digit zero-padded suffix starting from 0 before the extension, such as `mux_stream0000000123.ts`.

func (MuxStreamOutput) Fmp4 added in v0.32.0 

func (o MuxStreamOutput) Fmp4() Fmp4ConfigPtrOutput

Optional. `fmp4` container configuration.

func (MuxStreamOutput) Key 

func (o MuxStreamOutput) Key() pulumi.StringPtrOutput

A unique key for this multiplexed stream.

func (MuxStreamOutput) SegmentSettings 

func (o MuxStreamOutput) SegmentSettings() SegmentSettingsPtrOutput

Segment settings for `ts`, `fmp4` and `vtt`.

func (MuxStreamOutput) ToMuxStreamOutput 

func (o MuxStreamOutput) ToMuxStreamOutput() MuxStreamOutput

func (MuxStreamOutput) ToMuxStreamOutputWithContext 

func (o MuxStreamOutput) ToMuxStreamOutputWithContext(ctx context.Context) MuxStreamOutput

type MuxStreamResponse 

type MuxStreamResponse struct {
	// The container format. The default is `mp4` Supported container formats: - `ts` - `fmp4`- the corresponding file extension is `.m4s` - `mp4` - `vtt` See also: [Supported input and output formats](https://cloud.google.com/transcoder/docs/concepts/supported-input-and-output-formats)
	Container string `pulumi:"container"`
	// List of ElementaryStream.key values multiplexed in this stream.
	ElementaryStreams []string `pulumi:"elementaryStreams"`
	// Identifier of the encryption configuration to use. If omitted, output will be unencrypted.
	EncryptionId string `pulumi:"encryptionId"`
	// The name of the generated file. The default is MuxStream.key with the extension suffix corresponding to the MuxStream.container. Individual segments also have an incremental 10-digit zero-padded suffix starting from 0 before the extension, such as `mux_stream0000000123.ts`.
	FileName string `pulumi:"fileName"`
	// Optional. `fmp4` container configuration.
	Fmp4 Fmp4ConfigResponse `pulumi:"fmp4"`
	// A unique key for this multiplexed stream.
	Key string `pulumi:"key"`
	// Segment settings for `ts`, `fmp4` and `vtt`.
	SegmentSettings SegmentSettingsResponse `pulumi:"segmentSettings"`
}

Multiplexing settings for output stream.

type MuxStreamResponseArrayOutput 

type MuxStreamResponseArrayOutput struct{ *pulumi.OutputState }

func (MuxStreamResponseArrayOutput) ElementType 

func (MuxStreamResponseArrayOutput) ElementType() reflect.Type

func (MuxStreamResponseArrayOutput) Index 

func (o MuxStreamResponseArrayOutput) Index(i pulumi.IntInput) MuxStreamResponseOutput

func (MuxStreamResponseArrayOutput) ToMuxStreamResponseArrayOutput 

func (o MuxStreamResponseArrayOutput) ToMuxStreamResponseArrayOutput() MuxStreamResponseArrayOutput

func (MuxStreamResponseArrayOutput) ToMuxStreamResponseArrayOutputWithContext 

func (o MuxStreamResponseArrayOutput) ToMuxStreamResponseArrayOutputWithContext(ctx context.Context) MuxStreamResponseArrayOutput

type MuxStreamResponseOutput 

type MuxStreamResponseOutput struct{ *pulumi.OutputState }

Multiplexing settings for output stream.

func (MuxStreamResponseOutput) Container 

func (o MuxStreamResponseOutput) Container() pulumi.StringOutput

The container format. The default is `mp4` Supported container formats: - `ts` - `fmp4`- the corresponding file extension is `.m4s` - `mp4` - `vtt` See also: [Supported input and output formats](https://cloud.google.com/transcoder/docs/concepts/supported-input-and-output-formats)

func (MuxStreamResponseOutput) ElementType 

func (MuxStreamResponseOutput) ElementType() reflect.Type

func (MuxStreamResponseOutput) ElementaryStreams 

func (o MuxStreamResponseOutput) ElementaryStreams() pulumi.StringArrayOutput

List of ElementaryStream.key values multiplexed in this stream.

func (MuxStreamResponseOutput) EncryptionId added in v0.32.0 

func (o MuxStreamResponseOutput) EncryptionId() pulumi.StringOutput

Identifier of the encryption configuration to use. If omitted, output will be unencrypted.

func (MuxStreamResponseOutput) FileName 

func (o MuxStreamResponseOutput) FileName() pulumi.StringOutput

The name of the generated file. The default is MuxStream.key with the extension suffix corresponding to the MuxStream.container. Individual segments also have an incremental 10-digit zero-padded suffix starting from 0 before the extension, such as `mux_stream0000000123.ts`.

func (MuxStreamResponseOutput) Fmp4 added in v0.32.0 

func (o MuxStreamResponseOutput) Fmp4() Fmp4ConfigResponseOutput

Optional. `fmp4` container configuration.

func (MuxStreamResponseOutput) Key 

func (o MuxStreamResponseOutput) Key() pulumi.StringOutput

A unique key for this multiplexed stream.

func (MuxStreamResponseOutput) SegmentSettings 

func (o MuxStreamResponseOutput) SegmentSettings() SegmentSettingsResponseOutput

Segment settings for `ts`, `fmp4` and `vtt`.

func (MuxStreamResponseOutput) ToMuxStreamResponseOutput 

func (o MuxStreamResponseOutput) ToMuxStreamResponseOutput() MuxStreamResponseOutput

func (MuxStreamResponseOutput) ToMuxStreamResponseOutputWithContext 

func (o MuxStreamResponseOutput) ToMuxStreamResponseOutputWithContext(ctx context.Context) MuxStreamResponseOutput

type NormalizedCoordinate 

type NormalizedCoordinate struct {
	// Normalized x coordinate.
	X *float64 `pulumi:"x"`
	// Normalized y coordinate.
	Y *float64 `pulumi:"y"`
}

2D normalized coordinates. Default: `{0.0, 0.0}`

type NormalizedCoordinateArgs 

type NormalizedCoordinateArgs struct {
	// Normalized x coordinate.
	X pulumi.Float64PtrInput `pulumi:"x"`
	// Normalized y coordinate.
	Y pulumi.Float64PtrInput `pulumi:"y"`
}

2D normalized coordinates. Default: `{0.0, 0.0}`

func (NormalizedCoordinateArgs) ElementType 

func (NormalizedCoordinateArgs) ElementType() reflect.Type

func (NormalizedCoordinateArgs) ToNormalizedCoordinateOutput 

func (i NormalizedCoordinateArgs) ToNormalizedCoordinateOutput() NormalizedCoordinateOutput

func (NormalizedCoordinateArgs) ToNormalizedCoordinateOutputWithContext 

func (i NormalizedCoordinateArgs) ToNormalizedCoordinateOutputWithContext(ctx context.Context) NormalizedCoordinateOutput

func (NormalizedCoordinateArgs) ToNormalizedCoordinatePtrOutput 

func (i NormalizedCoordinateArgs) ToNormalizedCoordinatePtrOutput() NormalizedCoordinatePtrOutput

func (NormalizedCoordinateArgs) ToNormalizedCoordinatePtrOutputWithContext 

func (i NormalizedCoordinateArgs) ToNormalizedCoordinatePtrOutputWithContext(ctx context.Context) NormalizedCoordinatePtrOutput

type NormalizedCoordinateInput 

type NormalizedCoordinateInput interface {
	pulumi.Input

	ToNormalizedCoordinateOutput() NormalizedCoordinateOutput
	ToNormalizedCoordinateOutputWithContext(context.Context) NormalizedCoordinateOutput
}

NormalizedCoordinateInput is an input type that accepts NormalizedCoordinateArgs and NormalizedCoordinateOutput values. You can construct a concrete instance of `NormalizedCoordinateInput` via: 

NormalizedCoordinateArgs{...}

type NormalizedCoordinateOutput 

type NormalizedCoordinateOutput struct{ *pulumi.OutputState }

2D normalized coordinates. Default: `{0.0, 0.0}`

func (NormalizedCoordinateOutput) ElementType 

func (NormalizedCoordinateOutput) ElementType() reflect.Type

func (NormalizedCoordinateOutput) ToNormalizedCoordinateOutput 

func (o NormalizedCoordinateOutput) ToNormalizedCoordinateOutput() NormalizedCoordinateOutput

func (NormalizedCoordinateOutput) ToNormalizedCoordinateOutputWithContext 

func (o NormalizedCoordinateOutput) ToNormalizedCoordinateOutputWithContext(ctx context.Context) NormalizedCoordinateOutput

func (NormalizedCoordinateOutput) ToNormalizedCoordinatePtrOutput 

func (o NormalizedCoordinateOutput) ToNormalizedCoordinatePtrOutput() NormalizedCoordinatePtrOutput

func (NormalizedCoordinateOutput) ToNormalizedCoordinatePtrOutputWithContext 

func (o NormalizedCoordinateOutput) ToNormalizedCoordinatePtrOutputWithContext(ctx context.Context) NormalizedCoordinatePtrOutput

func (NormalizedCoordinateOutput) X 

func (o NormalizedCoordinateOutput) X() pulumi.Float64PtrOutput

Normalized x coordinate.

func (NormalizedCoordinateOutput) Y 

func (o NormalizedCoordinateOutput) Y() pulumi.Float64PtrOutput

Normalized y coordinate.

type NormalizedCoordinatePtrInput 

type NormalizedCoordinatePtrInput interface {
	pulumi.Input

	ToNormalizedCoordinatePtrOutput() NormalizedCoordinatePtrOutput
	ToNormalizedCoordinatePtrOutputWithContext(context.Context) NormalizedCoordinatePtrOutput
}

NormalizedCoordinatePtrInput is an input type that accepts NormalizedCoordinateArgs, NormalizedCoordinatePtr and NormalizedCoordinatePtrOutput values. You can construct a concrete instance of `NormalizedCoordinatePtrInput` via: 

        NormalizedCoordinateArgs{...}

or:

        nil

func NormalizedCoordinatePtr 

func NormalizedCoordinatePtr(v *NormalizedCoordinateArgs) NormalizedCoordinatePtrInput

type NormalizedCoordinatePtrOutput 

type NormalizedCoordinatePtrOutput struct{ *pulumi.OutputState }

func (NormalizedCoordinatePtrOutput) Elem 

func (o NormalizedCoordinatePtrOutput) Elem() NormalizedCoordinateOutput

func (NormalizedCoordinatePtrOutput) ElementType 

func (NormalizedCoordinatePtrOutput) ElementType() reflect.Type

func (NormalizedCoordinatePtrOutput) ToNormalizedCoordinatePtrOutput 

func (o NormalizedCoordinatePtrOutput) ToNormalizedCoordinatePtrOutput() NormalizedCoordinatePtrOutput

func (NormalizedCoordinatePtrOutput) ToNormalizedCoordinatePtrOutputWithContext 

func (o NormalizedCoordinatePtrOutput) ToNormalizedCoordinatePtrOutputWithContext(ctx context.Context) NormalizedCoordinatePtrOutput

func (NormalizedCoordinatePtrOutput) X 

func (o NormalizedCoordinatePtrOutput) X() pulumi.Float64PtrOutput

Normalized x coordinate.

func (NormalizedCoordinatePtrOutput) Y 

func (o NormalizedCoordinatePtrOutput) Y() pulumi.Float64PtrOutput

Normalized y coordinate.

type NormalizedCoordinateResponse 

type NormalizedCoordinateResponse struct {
	// Normalized x coordinate.
	X float64 `pulumi:"x"`
	// Normalized y coordinate.
	Y float64 `pulumi:"y"`
}

2D normalized coordinates. Default: `{0.0, 0.0}`

type NormalizedCoordinateResponseOutput 

type NormalizedCoordinateResponseOutput struct{ *pulumi.OutputState }

2D normalized coordinates. Default: `{0.0, 0.0}`

func (NormalizedCoordinateResponseOutput) ElementType 

func (NormalizedCoordinateResponseOutput) ElementType() reflect.Type

func (NormalizedCoordinateResponseOutput) ToNormalizedCoordinateResponseOutput 

func (o NormalizedCoordinateResponseOutput) ToNormalizedCoordinateResponseOutput() NormalizedCoordinateResponseOutput

func (NormalizedCoordinateResponseOutput) ToNormalizedCoordinateResponseOutputWithContext 

func (o NormalizedCoordinateResponseOutput) ToNormalizedCoordinateResponseOutputWithContext(ctx context.Context) NormalizedCoordinateResponseOutput

func (NormalizedCoordinateResponseOutput) X 

func (o NormalizedCoordinateResponseOutput) X() pulumi.Float64Output

Normalized x coordinate.

func (NormalizedCoordinateResponseOutput) Y 

func (o NormalizedCoordinateResponseOutput) Y() pulumi.Float64Output

Normalized y coordinate.

type Output 

type Output struct {
	// URI for the output file(s). For example, `gs://my-bucket/outputs/`. If empty, the value is populated from Job.output_uri. See [Supported input and output formats](https://cloud.google.com/transcoder/docs/concepts/supported-input-and-output-formats).
	Uri *string `pulumi:"uri"`
}

Location of output file(s) in a Cloud Storage bucket.

type OutputArgs 

type OutputArgs struct {
	// URI for the output file(s). For example, `gs://my-bucket/outputs/`. If empty, the value is populated from Job.output_uri. See [Supported input and output formats](https://cloud.google.com/transcoder/docs/concepts/supported-input-and-output-formats).
	Uri pulumi.StringPtrInput `pulumi:"uri"`
}

Location of output file(s) in a Cloud Storage bucket.

func (OutputArgs) ElementType 

func (OutputArgs) ElementType() reflect.Type

func (OutputArgs) ToOutputOutput 

func (i OutputArgs) ToOutputOutput() OutputOutput

func (OutputArgs) ToOutputOutputWithContext 

func (i OutputArgs) ToOutputOutputWithContext(ctx context.Context) OutputOutput

func (OutputArgs) ToOutputPtrOutput 

func (i OutputArgs) ToOutputPtrOutput() OutputPtrOutput

func (OutputArgs) ToOutputPtrOutputWithContext 

func (i OutputArgs) ToOutputPtrOutputWithContext(ctx context.Context) OutputPtrOutput

type OutputInput 

type OutputInput interface {
	pulumi.Input

	ToOutputOutput() OutputOutput
	ToOutputOutputWithContext(context.Context) OutputOutput
}

OutputInput is an input type that accepts OutputArgs and OutputOutput values. You can construct a concrete instance of `OutputInput` via: 

OutputArgs{...}

type OutputOutput 

type OutputOutput struct{ *pulumi.OutputState }

Location of output file(s) in a Cloud Storage bucket.

func (OutputOutput) ElementType 

func (OutputOutput) ElementType() reflect.Type

func (OutputOutput) ToOutputOutput 

func (o OutputOutput) ToOutputOutput() OutputOutput

func (OutputOutput) ToOutputOutputWithContext 

func (o OutputOutput) ToOutputOutputWithContext(ctx context.Context) OutputOutput

func (OutputOutput) ToOutputPtrOutput 

func (o OutputOutput) ToOutputPtrOutput() OutputPtrOutput

func (OutputOutput) ToOutputPtrOutputWithContext 

func (o OutputOutput) ToOutputPtrOutputWithContext(ctx context.Context) OutputPtrOutput

func (OutputOutput) Uri 

func (o OutputOutput) Uri() pulumi.StringPtrOutput

URI for the output file(s). For example, `gs://my-bucket/outputs/`. If empty, the value is populated from Job.output_uri. See [Supported input and output formats](https://cloud.google.com/transcoder/docs/concepts/supported-input-and-output-formats).

type OutputPtrInput 

type OutputPtrInput interface {
	pulumi.Input

	ToOutputPtrOutput() OutputPtrOutput
	ToOutputPtrOutputWithContext(context.Context) OutputPtrOutput
}

OutputPtrInput is an input type that accepts OutputArgs, OutputPtr and OutputPtrOutput values. You can construct a concrete instance of `OutputPtrInput` via: 

        OutputArgs{...}

or:

        nil

func OutputPtr 

func OutputPtr(v *OutputArgs) OutputPtrInput

type OutputPtrOutput 

type OutputPtrOutput struct{ *pulumi.OutputState }

func (OutputPtrOutput) Elem 

func (o OutputPtrOutput) Elem() OutputOutput

func (OutputPtrOutput) ElementType 

func (OutputPtrOutput) ElementType() reflect.Type

func (OutputPtrOutput) ToOutputPtrOutput 

func (o OutputPtrOutput) ToOutputPtrOutput() OutputPtrOutput

func (OutputPtrOutput) ToOutputPtrOutputWithContext 

func (o OutputPtrOutput) ToOutputPtrOutputWithContext(ctx context.Context) OutputPtrOutput

func (OutputPtrOutput) Uri 

func (o OutputPtrOutput) Uri() pulumi.StringPtrOutput

URI for the output file(s). For example, `gs://my-bucket/outputs/`. If empty, the value is populated from Job.output_uri. See [Supported input and output formats](https://cloud.google.com/transcoder/docs/concepts/supported-input-and-output-formats).

type OutputResponse 

type OutputResponse struct {
	// URI for the output file(s). For example, `gs://my-bucket/outputs/`. If empty, the value is populated from Job.output_uri. See [Supported input and output formats](https://cloud.google.com/transcoder/docs/concepts/supported-input-and-output-formats).
	Uri string `pulumi:"uri"`
}

Location of output file(s) in a Cloud Storage bucket.

type OutputResponseOutput 

type OutputResponseOutput struct{ *pulumi.OutputState }

Location of output file(s) in a Cloud Storage bucket.

func (OutputResponseOutput) ElementType 

func (OutputResponseOutput) ElementType() reflect.Type

func (OutputResponseOutput) ToOutputResponseOutput 

func (o OutputResponseOutput) ToOutputResponseOutput() OutputResponseOutput

func (OutputResponseOutput) ToOutputResponseOutputWithContext 

func (o OutputResponseOutput) ToOutputResponseOutputWithContext(ctx context.Context) OutputResponseOutput

func (OutputResponseOutput) Uri 

func (o OutputResponseOutput) Uri() pulumi.StringOutput

URI for the output file(s). For example, `gs://my-bucket/outputs/`. If empty, the value is populated from Job.output_uri. See [Supported input and output formats](https://cloud.google.com/transcoder/docs/concepts/supported-input-and-output-formats).

type Overlay 

type Overlay struct {
	// List of animations. The list should be chronological, without any time overlap.
	Animations []Animation `pulumi:"animations"`
	// Image overlay.
	Image *Image `pulumi:"image"`
}

Overlay configuration.

type OverlayArgs 

type OverlayArgs struct {
	// List of animations. The list should be chronological, without any time overlap.
	Animations AnimationArrayInput `pulumi:"animations"`
	// Image overlay.
	Image ImagePtrInput `pulumi:"image"`
}

Overlay configuration.

func (OverlayArgs) ElementType 

func (OverlayArgs) ElementType() reflect.Type

func (OverlayArgs) ToOverlayOutput 

func (i OverlayArgs) ToOverlayOutput() OverlayOutput

func (OverlayArgs) ToOverlayOutputWithContext 

func (i OverlayArgs) ToOverlayOutputWithContext(ctx context.Context) OverlayOutput

type OverlayArray 

type OverlayArray []OverlayInput

func (OverlayArray) ElementType 

func (OverlayArray) ElementType() reflect.Type

func (OverlayArray) ToOverlayArrayOutput 

func (i OverlayArray) ToOverlayArrayOutput() OverlayArrayOutput

func (OverlayArray) ToOverlayArrayOutputWithContext 

func (i OverlayArray) ToOverlayArrayOutputWithContext(ctx context.Context) OverlayArrayOutput

type OverlayArrayInput 

type OverlayArrayInput interface {
	pulumi.Input

	ToOverlayArrayOutput() OverlayArrayOutput
	ToOverlayArrayOutputWithContext(context.Context) OverlayArrayOutput
}

OverlayArrayInput is an input type that accepts OverlayArray and OverlayArrayOutput values. You can construct a concrete instance of `OverlayArrayInput` via: 

OverlayArray{ OverlayArgs{...} }

type OverlayArrayOutput 

type OverlayArrayOutput struct{ *pulumi.OutputState }

func (OverlayArrayOutput) ElementType 

func (OverlayArrayOutput) ElementType() reflect.Type

func (OverlayArrayOutput) Index 

func (o OverlayArrayOutput) Index(i pulumi.IntInput) OverlayOutput

func (OverlayArrayOutput) ToOverlayArrayOutput 

func (o OverlayArrayOutput) ToOverlayArrayOutput() OverlayArrayOutput

func (OverlayArrayOutput) ToOverlayArrayOutputWithContext 

func (o OverlayArrayOutput) ToOverlayArrayOutputWithContext(ctx context.Context) OverlayArrayOutput

type OverlayInput 

type OverlayInput interface {
	pulumi.Input

	ToOverlayOutput() OverlayOutput
	ToOverlayOutputWithContext(context.Context) OverlayOutput
}

OverlayInput is an input type that accepts OverlayArgs and OverlayOutput values. You can construct a concrete instance of `OverlayInput` via: 

OverlayArgs{...}

type OverlayOutput 

type OverlayOutput struct{ *pulumi.OutputState }

Overlay configuration.

func (OverlayOutput) Animations 

func (o OverlayOutput) Animations() AnimationArrayOutput

List of animations. The list should be chronological, without any time overlap.

func (OverlayOutput) ElementType 

func (OverlayOutput) ElementType() reflect.Type

func (OverlayOutput) Image 

func (o OverlayOutput) Image() ImagePtrOutput

Image overlay.

func (OverlayOutput) ToOverlayOutput 

func (o OverlayOutput) ToOverlayOutput() OverlayOutput

func (OverlayOutput) ToOverlayOutputWithContext 

func (o OverlayOutput) ToOverlayOutputWithContext(ctx context.Context) OverlayOutput

type OverlayResponse 

type OverlayResponse struct {
	// List of animations. The list should be chronological, without any time overlap.
	Animations []AnimationResponse `pulumi:"animations"`
	// Image overlay.
	Image ImageResponse `pulumi:"image"`
}

Overlay configuration.

type OverlayResponseArrayOutput 

type OverlayResponseArrayOutput struct{ *pulumi.OutputState }

func (OverlayResponseArrayOutput) ElementType 

func (OverlayResponseArrayOutput) ElementType() reflect.Type

func (OverlayResponseArrayOutput) Index 

func (o OverlayResponseArrayOutput) Index(i pulumi.IntInput) OverlayResponseOutput

func (OverlayResponseArrayOutput) ToOverlayResponseArrayOutput 

func (o OverlayResponseArrayOutput) ToOverlayResponseArrayOutput() OverlayResponseArrayOutput

func (OverlayResponseArrayOutput) ToOverlayResponseArrayOutputWithContext 

func (o OverlayResponseArrayOutput) ToOverlayResponseArrayOutputWithContext(ctx context.Context) OverlayResponseArrayOutput

type OverlayResponseOutput 

type OverlayResponseOutput struct{ *pulumi.OutputState }

Overlay configuration.

func (OverlayResponseOutput) Animations 

func (o OverlayResponseOutput) Animations() AnimationResponseArrayOutput

List of animations. The list should be chronological, without any time overlap.

func (OverlayResponseOutput) ElementType 

func (OverlayResponseOutput) ElementType() reflect.Type

func (OverlayResponseOutput) Image 

func (o OverlayResponseOutput) Image() ImageResponseOutput

Image overlay.

func (OverlayResponseOutput) ToOverlayResponseOutput 

func (o OverlayResponseOutput) ToOverlayResponseOutput() OverlayResponseOutput

func (OverlayResponseOutput) ToOverlayResponseOutputWithContext 

func (o OverlayResponseOutput) ToOverlayResponseOutputWithContext(ctx context.Context) OverlayResponseOutput

type Pad 

type Pad struct {
	// The number of pixels to add to the bottom. The default is 0.
	BottomPixels *int `pulumi:"bottomPixels"`
	// The number of pixels to add to the left. The default is 0.
	LeftPixels *int `pulumi:"leftPixels"`
	// The number of pixels to add to the right. The default is 0.
	RightPixels *int `pulumi:"rightPixels"`
	// The number of pixels to add to the top. The default is 0.
	TopPixels *int `pulumi:"topPixels"`
}

Pad filter configuration for the input video. The padded input video is scaled after padding with black to match the output resolution.

type PadArgs 

type PadArgs struct {
	// The number of pixels to add to the bottom. The default is 0.
	BottomPixels pulumi.IntPtrInput `pulumi:"bottomPixels"`
	// The number of pixels to add to the left. The default is 0.
	LeftPixels pulumi.IntPtrInput `pulumi:"leftPixels"`
	// The number of pixels to add to the right. The default is 0.
	RightPixels pulumi.IntPtrInput `pulumi:"rightPixels"`
	// The number of pixels to add to the top. The default is 0.
	TopPixels pulumi.IntPtrInput `pulumi:"topPixels"`
}

Pad filter configuration for the input video. The padded input video is scaled after padding with black to match the output resolution.

func (PadArgs) ElementType 

func (PadArgs) ElementType() reflect.Type

func (PadArgs) ToPadOutput 

func (i PadArgs) ToPadOutput() PadOutput

func (PadArgs) ToPadOutputWithContext 

func (i PadArgs) ToPadOutputWithContext(ctx context.Context) PadOutput

func (PadArgs) ToPadPtrOutput 

func (i PadArgs) ToPadPtrOutput() PadPtrOutput

func (PadArgs) ToPadPtrOutputWithContext 

func (i PadArgs) ToPadPtrOutputWithContext(ctx context.Context) PadPtrOutput

type PadInput 

type PadInput interface {
	pulumi.Input

	ToPadOutput() PadOutput
	ToPadOutputWithContext(context.Context) PadOutput
}

PadInput is an input type that accepts PadArgs and PadOutput values. You can construct a concrete instance of `PadInput` via: 

PadArgs{...}

type PadOutput 

type PadOutput struct{ *pulumi.OutputState }

Pad filter configuration for the input video. The padded input video is scaled after padding with black to match the output resolution.

func (PadOutput) BottomPixels 

func (o PadOutput) BottomPixels() pulumi.IntPtrOutput

The number of pixels to add to the bottom. The default is 0.

func (PadOutput) ElementType 

func (PadOutput) ElementType() reflect.Type

func (PadOutput) LeftPixels 

func (o PadOutput) LeftPixels() pulumi.IntPtrOutput

The number of pixels to add to the left. The default is 0.

func (PadOutput) RightPixels 

func (o PadOutput) RightPixels() pulumi.IntPtrOutput

The number of pixels to add to the right. The default is 0.

func (PadOutput) ToPadOutput 

func (o PadOutput) ToPadOutput() PadOutput

func (PadOutput) ToPadOutputWithContext 

func (o PadOutput) ToPadOutputWithContext(ctx context.Context) PadOutput

func (PadOutput) ToPadPtrOutput 

func (o PadOutput) ToPadPtrOutput() PadPtrOutput

func (PadOutput) ToPadPtrOutputWithContext 

func (o PadOutput) ToPadPtrOutputWithContext(ctx context.Context) PadPtrOutput

func (PadOutput) TopPixels 

func (o PadOutput) TopPixels() pulumi.IntPtrOutput

The number of pixels to add to the top. The default is 0.

type PadPtrInput 

type PadPtrInput interface {
	pulumi.Input

	ToPadPtrOutput() PadPtrOutput
	ToPadPtrOutputWithContext(context.Context) PadPtrOutput
}

PadPtrInput is an input type that accepts PadArgs, PadPtr and PadPtrOutput values. You can construct a concrete instance of `PadPtrInput` via: 

        PadArgs{...}

or:

        nil

func PadPtr 

func PadPtr(v *PadArgs) PadPtrInput

type PadPtrOutput 

type PadPtrOutput struct{ *pulumi.OutputState }

func (PadPtrOutput) BottomPixels 

func (o PadPtrOutput) BottomPixels() pulumi.IntPtrOutput

The number of pixels to add to the bottom. The default is 0.

func (PadPtrOutput) Elem 

func (o PadPtrOutput) Elem() PadOutput

func (PadPtrOutput) ElementType 

func (PadPtrOutput) ElementType() reflect.Type

func (PadPtrOutput) LeftPixels 

func (o PadPtrOutput) LeftPixels() pulumi.IntPtrOutput

The number of pixels to add to the left. The default is 0.

func (PadPtrOutput) RightPixels 

func (o PadPtrOutput) RightPixels() pulumi.IntPtrOutput

The number of pixels to add to the right. The default is 0.

func (PadPtrOutput) ToPadPtrOutput 

func (o PadPtrOutput) ToPadPtrOutput() PadPtrOutput

func (PadPtrOutput) ToPadPtrOutputWithContext 

func (o PadPtrOutput) ToPadPtrOutputWithContext(ctx context.Context) PadPtrOutput

func (PadPtrOutput) TopPixels 

func (o PadPtrOutput) TopPixels() pulumi.IntPtrOutput

The number of pixels to add to the top. The default is 0.

type PadResponse 

type PadResponse struct {
	// The number of pixels to add to the bottom. The default is 0.
	BottomPixels int `pulumi:"bottomPixels"`
	// The number of pixels to add to the left. The default is 0.
	LeftPixels int `pulumi:"leftPixels"`
	// The number of pixels to add to the right. The default is 0.
	RightPixels int `pulumi:"rightPixels"`
	// The number of pixels to add to the top. The default is 0.
	TopPixels int `pulumi:"topPixels"`
}

Pad filter configuration for the input video. The padded input video is scaled after padding with black to match the output resolution.

type PadResponseOutput 

type PadResponseOutput struct{ *pulumi.OutputState }

Pad filter configuration for the input video. The padded input video is scaled after padding with black to match the output resolution.

func (PadResponseOutput) BottomPixels 

func (o PadResponseOutput) BottomPixels() pulumi.IntOutput

The number of pixels to add to the bottom. The default is 0.

func (PadResponseOutput) ElementType 

func (PadResponseOutput) ElementType() reflect.Type

func (PadResponseOutput) LeftPixels 

func (o PadResponseOutput) LeftPixels() pulumi.IntOutput

The number of pixels to add to the left. The default is 0.

func (PadResponseOutput) RightPixels 

func (o PadResponseOutput) RightPixels() pulumi.IntOutput

The number of pixels to add to the right. The default is 0.

func (PadResponseOutput) ToPadResponseOutput 

func (o PadResponseOutput) ToPadResponseOutput() PadResponseOutput

func (PadResponseOutput) ToPadResponseOutputWithContext 

func (o PadResponseOutput) ToPadResponseOutputWithContext(ctx context.Context) PadResponseOutput

func (PadResponseOutput) TopPixels 

func (o PadResponseOutput) TopPixels() pulumi.IntOutput

The number of pixels to add to the top. The default is 0.

type Playready added in v0.32.0 

type Playready struct {
}

Playready configuration.

type PlayreadyArgs added in v0.32.0 

type PlayreadyArgs struct {
}

Playready configuration.

func (PlayreadyArgs) ElementType added in v0.32.0 

func (PlayreadyArgs) ElementType() reflect.Type

func (PlayreadyArgs) ToPlayreadyOutput added in v0.32.0 

func (i PlayreadyArgs) ToPlayreadyOutput() PlayreadyOutput

func (PlayreadyArgs) ToPlayreadyOutputWithContext added in v0.32.0 

func (i PlayreadyArgs) ToPlayreadyOutputWithContext(ctx context.Context) PlayreadyOutput

func (PlayreadyArgs) ToPlayreadyPtrOutput added in v0.32.0 

func (i PlayreadyArgs) ToPlayreadyPtrOutput() PlayreadyPtrOutput

func (PlayreadyArgs) ToPlayreadyPtrOutputWithContext added in v0.32.0 

func (i PlayreadyArgs) ToPlayreadyPtrOutputWithContext(ctx context.Context) PlayreadyPtrOutput

type PlayreadyInput added in v0.32.0 

type PlayreadyInput interface {
	pulumi.Input

	ToPlayreadyOutput() PlayreadyOutput
	ToPlayreadyOutputWithContext(context.Context) PlayreadyOutput
}

PlayreadyInput is an input type that accepts PlayreadyArgs and PlayreadyOutput values. You can construct a concrete instance of `PlayreadyInput` via: 

PlayreadyArgs{...}

type PlayreadyOutput added in v0.32.0 

type PlayreadyOutput struct{ *pulumi.OutputState }

Playready configuration.

func (PlayreadyOutput) ElementType added in v0.32.0 

func (PlayreadyOutput) ElementType() reflect.Type

func (PlayreadyOutput) ToPlayreadyOutput added in v0.32.0 

func (o PlayreadyOutput) ToPlayreadyOutput() PlayreadyOutput

func (PlayreadyOutput) ToPlayreadyOutputWithContext added in v0.32.0 

func (o PlayreadyOutput) ToPlayreadyOutputWithContext(ctx context.Context) PlayreadyOutput

func (PlayreadyOutput) ToPlayreadyPtrOutput added in v0.32.0 

func (o PlayreadyOutput) ToPlayreadyPtrOutput() PlayreadyPtrOutput

func (PlayreadyOutput) ToPlayreadyPtrOutputWithContext added in v0.32.0 

func (o PlayreadyOutput) ToPlayreadyPtrOutputWithContext(ctx context.Context) PlayreadyPtrOutput

type PlayreadyPtrInput added in v0.32.0 

type PlayreadyPtrInput interface {
	pulumi.Input

	ToPlayreadyPtrOutput() PlayreadyPtrOutput
	ToPlayreadyPtrOutputWithContext(context.Context) PlayreadyPtrOutput
}

PlayreadyPtrInput is an input type that accepts PlayreadyArgs, PlayreadyPtr and PlayreadyPtrOutput values. You can construct a concrete instance of `PlayreadyPtrInput` via: 

        PlayreadyArgs{...}

or:

        nil

func PlayreadyPtr added in v0.32.0 

func PlayreadyPtr(v *PlayreadyArgs) PlayreadyPtrInput

type PlayreadyPtrOutput added in v0.32.0 

type PlayreadyPtrOutput struct{ *pulumi.OutputState }

func (PlayreadyPtrOutput) Elem added in v0.32.0 

func (o PlayreadyPtrOutput) Elem() PlayreadyOutput

func (PlayreadyPtrOutput) ElementType added in v0.32.0 

func (PlayreadyPtrOutput) ElementType() reflect.Type

func (PlayreadyPtrOutput) ToPlayreadyPtrOutput added in v0.32.0 

func (o PlayreadyPtrOutput) ToPlayreadyPtrOutput() PlayreadyPtrOutput

func (PlayreadyPtrOutput) ToPlayreadyPtrOutputWithContext added in v0.32.0 

func (o PlayreadyPtrOutput) ToPlayreadyPtrOutputWithContext(ctx context.Context) PlayreadyPtrOutput

type PlayreadyResponse added in v0.32.0 

type PlayreadyResponse struct {
}

Playready configuration.

type PlayreadyResponseOutput added in v0.32.0 

type PlayreadyResponseOutput struct{ *pulumi.OutputState }

Playready configuration.

func (PlayreadyResponseOutput) ElementType added in v0.32.0 

func (PlayreadyResponseOutput) ElementType() reflect.Type

func (PlayreadyResponseOutput) ToPlayreadyResponseOutput added in v0.32.0 

func (o PlayreadyResponseOutput) ToPlayreadyResponseOutput() PlayreadyResponseOutput

func (PlayreadyResponseOutput) ToPlayreadyResponseOutputWithContext added in v0.32.0 

func (o PlayreadyResponseOutput) ToPlayreadyResponseOutputWithContext(ctx context.Context) PlayreadyResponseOutput

type PreprocessingConfig 

type PreprocessingConfig struct {
	// Audio preprocessing configuration.
	Audio *Audio `pulumi:"audio"`
	// Color preprocessing configuration.
	Color *Color `pulumi:"color"`
	// Specify the video cropping configuration.
	Crop *Crop `pulumi:"crop"`
	// Deblock preprocessing configuration.
	Deblock *Deblock `pulumi:"deblock"`
	// Specify the video deinterlace configuration.
	Deinterlace *Deinterlace `pulumi:"deinterlace"`
	// Denoise preprocessing configuration.
	Denoise *Denoise `pulumi:"denoise"`
	// Specify the video pad filter configuration.
	Pad *Pad `pulumi:"pad"`
}

Preprocessing configurations.

type PreprocessingConfigArgs 

type PreprocessingConfigArgs struct {
	// Audio preprocessing configuration.
	Audio AudioPtrInput `pulumi:"audio"`
	// Color preprocessing configuration.
	Color ColorPtrInput `pulumi:"color"`
	// Specify the video cropping configuration.
	Crop CropPtrInput `pulumi:"crop"`
	// Deblock preprocessing configuration.
	Deblock DeblockPtrInput `pulumi:"deblock"`
	// Specify the video deinterlace configuration.
	Deinterlace DeinterlacePtrInput `pulumi:"deinterlace"`
	// Denoise preprocessing configuration.
	Denoise DenoisePtrInput `pulumi:"denoise"`
	// Specify the video pad filter configuration.
	Pad PadPtrInput `pulumi:"pad"`
}

Preprocessing configurations.

func (PreprocessingConfigArgs) ElementType 

func (PreprocessingConfigArgs) ElementType() reflect.Type

func (PreprocessingConfigArgs) ToPreprocessingConfigOutput 

func (i PreprocessingConfigArgs) ToPreprocessingConfigOutput() PreprocessingConfigOutput

func (PreprocessingConfigArgs) ToPreprocessingConfigOutputWithContext 

func (i PreprocessingConfigArgs) ToPreprocessingConfigOutputWithContext(ctx context.Context) PreprocessingConfigOutput

func (PreprocessingConfigArgs) ToPreprocessingConfigPtrOutput 

func (i PreprocessingConfigArgs) ToPreprocessingConfigPtrOutput() PreprocessingConfigPtrOutput

func (PreprocessingConfigArgs) ToPreprocessingConfigPtrOutputWithContext 

func (i PreprocessingConfigArgs) ToPreprocessingConfigPtrOutputWithContext(ctx context.Context) PreprocessingConfigPtrOutput

type PreprocessingConfigInput 

type PreprocessingConfigInput interface {
	pulumi.Input

	ToPreprocessingConfigOutput() PreprocessingConfigOutput
	ToPreprocessingConfigOutputWithContext(context.Context) PreprocessingConfigOutput
}

PreprocessingConfigInput is an input type that accepts PreprocessingConfigArgs and PreprocessingConfigOutput values. You can construct a concrete instance of `PreprocessingConfigInput` via: 

PreprocessingConfigArgs{...}

type PreprocessingConfigOutput 

type PreprocessingConfigOutput struct{ *pulumi.OutputState }

Preprocessing configurations.

func (PreprocessingConfigOutput) Audio 

func (o PreprocessingConfigOutput) Audio() AudioPtrOutput

Audio preprocessing configuration.

func (PreprocessingConfigOutput) Color 

func (o PreprocessingConfigOutput) Color() ColorPtrOutput

Color preprocessing configuration.

func (PreprocessingConfigOutput) Crop 

func (o PreprocessingConfigOutput) Crop() CropPtrOutput

Specify the video cropping configuration.

func (PreprocessingConfigOutput) Deblock 

func (o PreprocessingConfigOutput) Deblock() DeblockPtrOutput

Deblock preprocessing configuration.

func (PreprocessingConfigOutput) Deinterlace added in v0.24.0 

func (o PreprocessingConfigOutput) Deinterlace() DeinterlacePtrOutput

Specify the video deinterlace configuration.

func (PreprocessingConfigOutput) Denoise 

func (o PreprocessingConfigOutput) Denoise() DenoisePtrOutput

Denoise preprocessing configuration.

func (PreprocessingConfigOutput) ElementType 

func (PreprocessingConfigOutput) ElementType() reflect.Type

func (PreprocessingConfigOutput) Pad 

func (o PreprocessingConfigOutput) Pad() PadPtrOutput

Specify the video pad filter configuration.

func (PreprocessingConfigOutput) ToPreprocessingConfigOutput 

func (o PreprocessingConfigOutput) ToPreprocessingConfigOutput() PreprocessingConfigOutput

func (PreprocessingConfigOutput) ToPreprocessingConfigOutputWithContext 

func (o PreprocessingConfigOutput) ToPreprocessingConfigOutputWithContext(ctx context.Context) PreprocessingConfigOutput

func (PreprocessingConfigOutput) ToPreprocessingConfigPtrOutput 

func (o PreprocessingConfigOutput) ToPreprocessingConfigPtrOutput() PreprocessingConfigPtrOutput

func (PreprocessingConfigOutput) ToPreprocessingConfigPtrOutputWithContext 

func (o PreprocessingConfigOutput) ToPreprocessingConfigPtrOutputWithContext(ctx context.Context) PreprocessingConfigPtrOutput

type PreprocessingConfigPtrInput 

type PreprocessingConfigPtrInput interface {
	pulumi.Input

	ToPreprocessingConfigPtrOutput() PreprocessingConfigPtrOutput
	ToPreprocessingConfigPtrOutputWithContext(context.Context) PreprocessingConfigPtrOutput
}

PreprocessingConfigPtrInput is an input type that accepts PreprocessingConfigArgs, PreprocessingConfigPtr and PreprocessingConfigPtrOutput values. You can construct a concrete instance of `PreprocessingConfigPtrInput` via: 

        PreprocessingConfigArgs{...}

or:

        nil

func PreprocessingConfigPtr 

func PreprocessingConfigPtr(v *PreprocessingConfigArgs) PreprocessingConfigPtrInput

type PreprocessingConfigPtrOutput 

type PreprocessingConfigPtrOutput struct{ *pulumi.OutputState }

func (PreprocessingConfigPtrOutput) Audio 

func (o PreprocessingConfigPtrOutput) Audio() AudioPtrOutput

Audio preprocessing configuration.

func (PreprocessingConfigPtrOutput) Color 

func (o PreprocessingConfigPtrOutput) Color() ColorPtrOutput

Color preprocessing configuration.

func (PreprocessingConfigPtrOutput) Crop 

func (o PreprocessingConfigPtrOutput) Crop() CropPtrOutput

Specify the video cropping configuration.

func (PreprocessingConfigPtrOutput) Deblock 

func (o PreprocessingConfigPtrOutput) Deblock() DeblockPtrOutput

Deblock preprocessing configuration.

func (PreprocessingConfigPtrOutput) Deinterlace added in v0.24.0 

func (o PreprocessingConfigPtrOutput) Deinterlace() DeinterlacePtrOutput

Specify the video deinterlace configuration.

func (PreprocessingConfigPtrOutput) Denoise 

func (o PreprocessingConfigPtrOutput) Denoise() DenoisePtrOutput

Denoise preprocessing configuration.

func (PreprocessingConfigPtrOutput) Elem 

func (o PreprocessingConfigPtrOutput) Elem() PreprocessingConfigOutput

func (PreprocessingConfigPtrOutput) ElementType 

func (PreprocessingConfigPtrOutput) ElementType() reflect.Type

func (PreprocessingConfigPtrOutput) Pad 

func (o PreprocessingConfigPtrOutput) Pad() PadPtrOutput

Specify the video pad filter configuration.

func (PreprocessingConfigPtrOutput) ToPreprocessingConfigPtrOutput 

func (o PreprocessingConfigPtrOutput) ToPreprocessingConfigPtrOutput() PreprocessingConfigPtrOutput

func (PreprocessingConfigPtrOutput) ToPreprocessingConfigPtrOutputWithContext 

func (o PreprocessingConfigPtrOutput) ToPreprocessingConfigPtrOutputWithContext(ctx context.Context) PreprocessingConfigPtrOutput

type PreprocessingConfigResponse 

type PreprocessingConfigResponse struct {
	// Audio preprocessing configuration.
	Audio AudioResponse `pulumi:"audio"`
	// Color preprocessing configuration.
	Color ColorResponse `pulumi:"color"`
	// Specify the video cropping configuration.
	Crop CropResponse `pulumi:"crop"`
	// Deblock preprocessing configuration.
	Deblock DeblockResponse `pulumi:"deblock"`
	// Specify the video deinterlace configuration.
	Deinterlace DeinterlaceResponse `pulumi:"deinterlace"`
	// Denoise preprocessing configuration.
	Denoise DenoiseResponse `pulumi:"denoise"`
	// Specify the video pad filter configuration.
	Pad PadResponse `pulumi:"pad"`
}

Preprocessing configurations.

type PreprocessingConfigResponseOutput 

type PreprocessingConfigResponseOutput struct{ *pulumi.OutputState }

Preprocessing configurations.

func (PreprocessingConfigResponseOutput) Audio 

func (o PreprocessingConfigResponseOutput) Audio() AudioResponseOutput

Audio preprocessing configuration.

func (PreprocessingConfigResponseOutput) Color 

func (o PreprocessingConfigResponseOutput) Color() ColorResponseOutput

Color preprocessing configuration.

func (PreprocessingConfigResponseOutput) Crop 

func (o PreprocessingConfigResponseOutput) Crop() CropResponseOutput

Specify the video cropping configuration.

func (PreprocessingConfigResponseOutput) Deblock 

func (o PreprocessingConfigResponseOutput) Deblock() DeblockResponseOutput

Deblock preprocessing configuration.

func (PreprocessingConfigResponseOutput) Deinterlace added in v0.24.0 

func (o PreprocessingConfigResponseOutput) Deinterlace() DeinterlaceResponseOutput

Specify the video deinterlace configuration.

func (PreprocessingConfigResponseOutput) Denoise 

func (o PreprocessingConfigResponseOutput) Denoise() DenoiseResponseOutput

Denoise preprocessing configuration.

func (PreprocessingConfigResponseOutput) ElementType 

func (PreprocessingConfigResponseOutput) ElementType() reflect.Type

func (PreprocessingConfigResponseOutput) Pad 

func (o PreprocessingConfigResponseOutput) Pad() PadResponseOutput

Specify the video pad filter configuration.

func (PreprocessingConfigResponseOutput) ToPreprocessingConfigResponseOutput 

func (o PreprocessingConfigResponseOutput) ToPreprocessingConfigResponseOutput() PreprocessingConfigResponseOutput

func (PreprocessingConfigResponseOutput) ToPreprocessingConfigResponseOutputWithContext 

func (o PreprocessingConfigResponseOutput) ToPreprocessingConfigResponseOutputWithContext(ctx context.Context) PreprocessingConfigResponseOutput

type PubsubDestination 

type PubsubDestination struct {
	// The name of the Pub/Sub topic to publish job completion notification to. For example: `projects/{project}/topics/{topic}`.
	Topic *string `pulumi:"topic"`
}

A Pub/Sub destination.

type PubsubDestinationArgs 

type PubsubDestinationArgs struct {
	// The name of the Pub/Sub topic to publish job completion notification to. For example: `projects/{project}/topics/{topic}`.
	Topic pulumi.StringPtrInput `pulumi:"topic"`
}

A Pub/Sub destination.

func (PubsubDestinationArgs) ElementType 

func (PubsubDestinationArgs) ElementType() reflect.Type

func (PubsubDestinationArgs) ToPubsubDestinationOutput 

func (i PubsubDestinationArgs) ToPubsubDestinationOutput() PubsubDestinationOutput

func (PubsubDestinationArgs) ToPubsubDestinationOutputWithContext 

func (i PubsubDestinationArgs) ToPubsubDestinationOutputWithContext(ctx context.Context) PubsubDestinationOutput

func (PubsubDestinationArgs) ToPubsubDestinationPtrOutput 

func (i PubsubDestinationArgs) ToPubsubDestinationPtrOutput() PubsubDestinationPtrOutput

func (PubsubDestinationArgs) ToPubsubDestinationPtrOutputWithContext 

func (i PubsubDestinationArgs) ToPubsubDestinationPtrOutputWithContext(ctx context.Context) PubsubDestinationPtrOutput

type PubsubDestinationInput 

type PubsubDestinationInput interface {
	pulumi.Input

	ToPubsubDestinationOutput() PubsubDestinationOutput
	ToPubsubDestinationOutputWithContext(context.Context) PubsubDestinationOutput
}

PubsubDestinationInput is an input type that accepts PubsubDestinationArgs and PubsubDestinationOutput values. You can construct a concrete instance of `PubsubDestinationInput` via: 

PubsubDestinationArgs{...}

type PubsubDestinationOutput 

type PubsubDestinationOutput struct{ *pulumi.OutputState }

A Pub/Sub destination.

func (PubsubDestinationOutput) ElementType 

func (PubsubDestinationOutput) ElementType() reflect.Type

func (PubsubDestinationOutput) ToPubsubDestinationOutput 

func (o PubsubDestinationOutput) ToPubsubDestinationOutput() PubsubDestinationOutput

func (PubsubDestinationOutput) ToPubsubDestinationOutputWithContext 

func (o PubsubDestinationOutput) ToPubsubDestinationOutputWithContext(ctx context.Context) PubsubDestinationOutput

func (PubsubDestinationOutput) ToPubsubDestinationPtrOutput 

func (o PubsubDestinationOutput) ToPubsubDestinationPtrOutput() PubsubDestinationPtrOutput

func (PubsubDestinationOutput) ToPubsubDestinationPtrOutputWithContext 

func (o PubsubDestinationOutput) ToPubsubDestinationPtrOutputWithContext(ctx context.Context) PubsubDestinationPtrOutput

func (PubsubDestinationOutput) Topic 

func (o PubsubDestinationOutput) Topic() pulumi.StringPtrOutput

The name of the Pub/Sub topic to publish job completion notification to. For example: `projects/{project}/topics/{topic}`.

type PubsubDestinationPtrInput 

type PubsubDestinationPtrInput interface {
	pulumi.Input

	ToPubsubDestinationPtrOutput() PubsubDestinationPtrOutput
	ToPubsubDestinationPtrOutputWithContext(context.Context) PubsubDestinationPtrOutput
}

PubsubDestinationPtrInput is an input type that accepts PubsubDestinationArgs, PubsubDestinationPtr and PubsubDestinationPtrOutput values. You can construct a concrete instance of `PubsubDestinationPtrInput` via: 

        PubsubDestinationArgs{...}

or:

        nil

func PubsubDestinationPtr 

func PubsubDestinationPtr(v *PubsubDestinationArgs) PubsubDestinationPtrInput

type PubsubDestinationPtrOutput 

type PubsubDestinationPtrOutput struct{ *pulumi.OutputState }

func (PubsubDestinationPtrOutput) Elem 

func (o PubsubDestinationPtrOutput) Elem() PubsubDestinationOutput

func (PubsubDestinationPtrOutput) ElementType 

func (PubsubDestinationPtrOutput) ElementType() reflect.Type

func (PubsubDestinationPtrOutput) ToPubsubDestinationPtrOutput 

func (o PubsubDestinationPtrOutput) ToPubsubDestinationPtrOutput() PubsubDestinationPtrOutput

func (PubsubDestinationPtrOutput) ToPubsubDestinationPtrOutputWithContext 

func (o PubsubDestinationPtrOutput) ToPubsubDestinationPtrOutputWithContext(ctx context.Context) PubsubDestinationPtrOutput

func (PubsubDestinationPtrOutput) Topic 

func (o PubsubDestinationPtrOutput) Topic() pulumi.StringPtrOutput

The name of the Pub/Sub topic to publish job completion notification to. For example: `projects/{project}/topics/{topic}`.

type PubsubDestinationResponse 

type PubsubDestinationResponse struct {
	// The name of the Pub/Sub topic to publish job completion notification to. For example: `projects/{project}/topics/{topic}`.
	Topic string `pulumi:"topic"`
}

A Pub/Sub destination.

type PubsubDestinationResponseOutput 

type PubsubDestinationResponseOutput struct{ *pulumi.OutputState }

A Pub/Sub destination.

func (PubsubDestinationResponseOutput) ElementType 

func (PubsubDestinationResponseOutput) ElementType() reflect.Type

func (PubsubDestinationResponseOutput) ToPubsubDestinationResponseOutput 

func (o PubsubDestinationResponseOutput) ToPubsubDestinationResponseOutput() PubsubDestinationResponseOutput

func (PubsubDestinationResponseOutput) ToPubsubDestinationResponseOutputWithContext 

func (o PubsubDestinationResponseOutput) ToPubsubDestinationResponseOutputWithContext(ctx context.Context) PubsubDestinationResponseOutput

func (PubsubDestinationResponseOutput) Topic 

func (o PubsubDestinationResponseOutput) Topic() pulumi.StringOutput

The name of the Pub/Sub topic to publish job completion notification to. For example: `projects/{project}/topics/{topic}`.

type SampleAesEncryption added in v0.32.0 

type SampleAesEncryption struct {
}

Configuration for SAMPLE-AES encryption.

type SampleAesEncryptionArgs added in v0.32.0 

type SampleAesEncryptionArgs struct {
}

Configuration for SAMPLE-AES encryption.

func (SampleAesEncryptionArgs) ElementType added in v0.32.0 

func (SampleAesEncryptionArgs) ElementType() reflect.Type

func (SampleAesEncryptionArgs) ToSampleAesEncryptionOutput added in v0.32.0 

func (i SampleAesEncryptionArgs) ToSampleAesEncryptionOutput() SampleAesEncryptionOutput

func (SampleAesEncryptionArgs) ToSampleAesEncryptionOutputWithContext added in v0.32.0 

func (i SampleAesEncryptionArgs) ToSampleAesEncryptionOutputWithContext(ctx context.Context) SampleAesEncryptionOutput

func (SampleAesEncryptionArgs) ToSampleAesEncryptionPtrOutput added in v0.32.0 

func (i SampleAesEncryptionArgs) ToSampleAesEncryptionPtrOutput() SampleAesEncryptionPtrOutput

func (SampleAesEncryptionArgs) ToSampleAesEncryptionPtrOutputWithContext added in v0.32.0 

func (i SampleAesEncryptionArgs) ToSampleAesEncryptionPtrOutputWithContext(ctx context.Context) SampleAesEncryptionPtrOutput

type SampleAesEncryptionInput added in v0.32.0 

type SampleAesEncryptionInput interface {
	pulumi.Input

	ToSampleAesEncryptionOutput() SampleAesEncryptionOutput
	ToSampleAesEncryptionOutputWithContext(context.Context) SampleAesEncryptionOutput
}

SampleAesEncryptionInput is an input type that accepts SampleAesEncryptionArgs and SampleAesEncryptionOutput values. You can construct a concrete instance of `SampleAesEncryptionInput` via: 

SampleAesEncryptionArgs{...}

type SampleAesEncryptionOutput added in v0.32.0 

type SampleAesEncryptionOutput struct{ *pulumi.OutputState }

Configuration for SAMPLE-AES encryption.

func (SampleAesEncryptionOutput) ElementType added in v0.32.0 

func (SampleAesEncryptionOutput) ElementType() reflect.Type

func (SampleAesEncryptionOutput) ToSampleAesEncryptionOutput added in v0.32.0 

func (o SampleAesEncryptionOutput) ToSampleAesEncryptionOutput() SampleAesEncryptionOutput

func (SampleAesEncryptionOutput) ToSampleAesEncryptionOutputWithContext added in v0.32.0 

func (o SampleAesEncryptionOutput) ToSampleAesEncryptionOutputWithContext(ctx context.Context) SampleAesEncryptionOutput

func (SampleAesEncryptionOutput) ToSampleAesEncryptionPtrOutput added in v0.32.0 

func (o SampleAesEncryptionOutput) ToSampleAesEncryptionPtrOutput() SampleAesEncryptionPtrOutput

func (SampleAesEncryptionOutput) ToSampleAesEncryptionPtrOutputWithContext added in v0.32.0 

func (o SampleAesEncryptionOutput) ToSampleAesEncryptionPtrOutputWithContext(ctx context.Context) SampleAesEncryptionPtrOutput

type SampleAesEncryptionPtrInput added in v0.32.0 

type SampleAesEncryptionPtrInput interface {
	pulumi.Input

	ToSampleAesEncryptionPtrOutput() SampleAesEncryptionPtrOutput
	ToSampleAesEncryptionPtrOutputWithContext(context.Context) SampleAesEncryptionPtrOutput
}

SampleAesEncryptionPtrInput is an input type that accepts SampleAesEncryptionArgs, SampleAesEncryptionPtr and SampleAesEncryptionPtrOutput values. You can construct a concrete instance of `SampleAesEncryptionPtrInput` via: 

        SampleAesEncryptionArgs{...}

or:

        nil

func SampleAesEncryptionPtr added in v0.32.0 

func SampleAesEncryptionPtr(v *SampleAesEncryptionArgs) SampleAesEncryptionPtrInput

type SampleAesEncryptionPtrOutput added in v0.32.0 

type SampleAesEncryptionPtrOutput struct{ *pulumi.OutputState }

func (SampleAesEncryptionPtrOutput) Elem added in v0.32.0 

func (o SampleAesEncryptionPtrOutput) Elem() SampleAesEncryptionOutput

func (SampleAesEncryptionPtrOutput) ElementType added in v0.32.0 

func (SampleAesEncryptionPtrOutput) ElementType() reflect.Type

func (SampleAesEncryptionPtrOutput) ToSampleAesEncryptionPtrOutput added in v0.32.0 

func (o SampleAesEncryptionPtrOutput) ToSampleAesEncryptionPtrOutput() SampleAesEncryptionPtrOutput

func (SampleAesEncryptionPtrOutput) ToSampleAesEncryptionPtrOutputWithContext added in v0.32.0 

func (o SampleAesEncryptionPtrOutput) ToSampleAesEncryptionPtrOutputWithContext(ctx context.Context) SampleAesEncryptionPtrOutput

type SampleAesEncryptionResponse added in v0.32.0 

type SampleAesEncryptionResponse struct {
}

Configuration for SAMPLE-AES encryption.

type SampleAesEncryptionResponseOutput added in v0.32.0 

type SampleAesEncryptionResponseOutput struct{ *pulumi.OutputState }

Configuration for SAMPLE-AES encryption.

func (SampleAesEncryptionResponseOutput) ElementType added in v0.32.0 

func (SampleAesEncryptionResponseOutput) ElementType() reflect.Type

func (SampleAesEncryptionResponseOutput) ToSampleAesEncryptionResponseOutput added in v0.32.0 

func (o SampleAesEncryptionResponseOutput) ToSampleAesEncryptionResponseOutput() SampleAesEncryptionResponseOutput

func (SampleAesEncryptionResponseOutput) ToSampleAesEncryptionResponseOutputWithContext added in v0.32.0 

func (o SampleAesEncryptionResponseOutput) ToSampleAesEncryptionResponseOutputWithContext(ctx context.Context) SampleAesEncryptionResponseOutput

type SecretManagerSource added in v0.32.0 

type SecretManagerSource struct {
	// The name of the Secret Version containing the encryption key in the following format: `projects/{project}/secrets/{secret_id}/versions/{version_number}` Note that only numbered versions are supported. Aliases like "latest" are not supported.
	SecretVersion string `pulumi:"secretVersion"`
}

Configuration for secrets stored in Google Secret Manager.

type SecretManagerSourceArgs added in v0.32.0 

type SecretManagerSourceArgs struct {
	// The name of the Secret Version containing the encryption key in the following format: `projects/{project}/secrets/{secret_id}/versions/{version_number}` Note that only numbered versions are supported. Aliases like "latest" are not supported.
	SecretVersion pulumi.StringInput `pulumi:"secretVersion"`
}

Configuration for secrets stored in Google Secret Manager.

func (SecretManagerSourceArgs) ElementType added in v0.32.0 

func (SecretManagerSourceArgs) ElementType() reflect.Type

func (SecretManagerSourceArgs) ToSecretManagerSourceOutput added in v0.32.0 

func (i SecretManagerSourceArgs) ToSecretManagerSourceOutput() SecretManagerSourceOutput

func (SecretManagerSourceArgs) ToSecretManagerSourceOutputWithContext added in v0.32.0 

func (i SecretManagerSourceArgs) ToSecretManagerSourceOutputWithContext(ctx context.Context) SecretManagerSourceOutput

func (SecretManagerSourceArgs) ToSecretManagerSourcePtrOutput added in v0.32.0 

func (i SecretManagerSourceArgs) ToSecretManagerSourcePtrOutput() SecretManagerSourcePtrOutput

func (SecretManagerSourceArgs) ToSecretManagerSourcePtrOutputWithContext added in v0.32.0 

func (i SecretManagerSourceArgs) ToSecretManagerSourcePtrOutputWithContext(ctx context.Context) SecretManagerSourcePtrOutput

type SecretManagerSourceInput added in v0.32.0 

type SecretManagerSourceInput interface {
	pulumi.Input

	ToSecretManagerSourceOutput() SecretManagerSourceOutput
	ToSecretManagerSourceOutputWithContext(context.Context) SecretManagerSourceOutput
}

SecretManagerSourceInput is an input type that accepts SecretManagerSourceArgs and SecretManagerSourceOutput values. You can construct a concrete instance of `SecretManagerSourceInput` via: 

SecretManagerSourceArgs{...}

type SecretManagerSourceOutput added in v0.32.0 

type SecretManagerSourceOutput struct{ *pulumi.OutputState }

Configuration for secrets stored in Google Secret Manager.

func (SecretManagerSourceOutput) ElementType added in v0.32.0 

func (SecretManagerSourceOutput) ElementType() reflect.Type

func (SecretManagerSourceOutput) SecretVersion added in v0.32.0 

func (o SecretManagerSourceOutput) SecretVersion() pulumi.StringOutput

The name of the Secret Version containing the encryption key in the following format: `projects/{project}/secrets/{secret_id}/versions/{version_number}` Note that only numbered versions are supported. Aliases like "latest" are not supported.

func (SecretManagerSourceOutput) ToSecretManagerSourceOutput added in v0.32.0 

func (o SecretManagerSourceOutput) ToSecretManagerSourceOutput() SecretManagerSourceOutput

func (SecretManagerSourceOutput) ToSecretManagerSourceOutputWithContext added in v0.32.0 

func (o SecretManagerSourceOutput) ToSecretManagerSourceOutputWithContext(ctx context.Context) SecretManagerSourceOutput

func (SecretManagerSourceOutput) ToSecretManagerSourcePtrOutput added in v0.32.0 

func (o SecretManagerSourceOutput) ToSecretManagerSourcePtrOutput() SecretManagerSourcePtrOutput

func (SecretManagerSourceOutput) ToSecretManagerSourcePtrOutputWithContext added in v0.32.0 

func (o SecretManagerSourceOutput) ToSecretManagerSourcePtrOutputWithContext(ctx context.Context) SecretManagerSourcePtrOutput

type SecretManagerSourcePtrInput added in v0.32.0 

type SecretManagerSourcePtrInput interface {
	pulumi.Input

	ToSecretManagerSourcePtrOutput() SecretManagerSourcePtrOutput
	ToSecretManagerSourcePtrOutputWithContext(context.Context) SecretManagerSourcePtrOutput
}

SecretManagerSourcePtrInput is an input type that accepts SecretManagerSourceArgs, SecretManagerSourcePtr and SecretManagerSourcePtrOutput values. You can construct a concrete instance of `SecretManagerSourcePtrInput` via: 

        SecretManagerSourceArgs{...}

or:

        nil

func SecretManagerSourcePtr added in v0.32.0 

func SecretManagerSourcePtr(v *SecretManagerSourceArgs) SecretManagerSourcePtrInput

type SecretManagerSourcePtrOutput added in v0.32.0 

type SecretManagerSourcePtrOutput struct{ *pulumi.OutputState }

func (SecretManagerSourcePtrOutput) Elem added in v0.32.0 

func (o SecretManagerSourcePtrOutput) Elem() SecretManagerSourceOutput

func (SecretManagerSourcePtrOutput) ElementType added in v0.32.0 

func (SecretManagerSourcePtrOutput) ElementType() reflect.Type

func (SecretManagerSourcePtrOutput) SecretVersion added in v0.32.0 

func (o SecretManagerSourcePtrOutput) SecretVersion() pulumi.StringPtrOutput

The name of the Secret Version containing the encryption key in the following format: `projects/{project}/secrets/{secret_id}/versions/{version_number}` Note that only numbered versions are supported. Aliases like "latest" are not supported.

func (SecretManagerSourcePtrOutput) ToSecretManagerSourcePtrOutput added in v0.32.0 

func (o SecretManagerSourcePtrOutput) ToSecretManagerSourcePtrOutput() SecretManagerSourcePtrOutput

func (SecretManagerSourcePtrOutput) ToSecretManagerSourcePtrOutputWithContext added in v0.32.0 

func (o SecretManagerSourcePtrOutput) ToSecretManagerSourcePtrOutputWithContext(ctx context.Context) SecretManagerSourcePtrOutput

type SecretManagerSourceResponse added in v0.32.0 

type SecretManagerSourceResponse struct {
	// The name of the Secret Version containing the encryption key in the following format: `projects/{project}/secrets/{secret_id}/versions/{version_number}` Note that only numbered versions are supported. Aliases like "latest" are not supported.
	SecretVersion string `pulumi:"secretVersion"`
}

Configuration for secrets stored in Google Secret Manager.

type SecretManagerSourceResponseOutput added in v0.32.0 

type SecretManagerSourceResponseOutput struct{ *pulumi.OutputState }

Configuration for secrets stored in Google Secret Manager.

func (SecretManagerSourceResponseOutput) ElementType added in v0.32.0 

func (SecretManagerSourceResponseOutput) ElementType() reflect.Type

func (SecretManagerSourceResponseOutput) SecretVersion added in v0.32.0 

func (o SecretManagerSourceResponseOutput) SecretVersion() pulumi.StringOutput

The name of the Secret Version containing the encryption key in the following format: `projects/{project}/secrets/{secret_id}/versions/{version_number}` Note that only numbered versions are supported. Aliases like "latest" are not supported.

func (SecretManagerSourceResponseOutput) ToSecretManagerSourceResponseOutput added in v0.32.0 

func (o SecretManagerSourceResponseOutput) ToSecretManagerSourceResponseOutput() SecretManagerSourceResponseOutput

func (SecretManagerSourceResponseOutput) ToSecretManagerSourceResponseOutputWithContext added in v0.32.0 

func (o SecretManagerSourceResponseOutput) ToSecretManagerSourceResponseOutputWithContext(ctx context.Context) SecretManagerSourceResponseOutput

type SegmentSettings 

type SegmentSettings struct {
	// Create an individual segment file. The default is `false`.
	IndividualSegments bool `pulumi:"individualSegments"`
	// Duration of the segments in seconds. The default is `6.0s`. Note that `segmentDuration` must be greater than or equal to [`gopDuration`](#videostream), and `segmentDuration` must be divisible by [`gopDuration`](#videostream).
	SegmentDuration *string `pulumi:"segmentDuration"`
}

Segment settings for `ts`, `fmp4` and `vtt`.

type SegmentSettingsArgs 

type SegmentSettingsArgs struct {
	// Create an individual segment file. The default is `false`.
	IndividualSegments pulumi.BoolInput `pulumi:"individualSegments"`
	// Duration of the segments in seconds. The default is `6.0s`. Note that `segmentDuration` must be greater than or equal to [`gopDuration`](#videostream), and `segmentDuration` must be divisible by [`gopDuration`](#videostream).
	SegmentDuration pulumi.StringPtrInput `pulumi:"segmentDuration"`
}

Segment settings for `ts`, `fmp4` and `vtt`.

func (SegmentSettingsArgs) ElementType 

func (SegmentSettingsArgs) ElementType() reflect.Type

func (SegmentSettingsArgs) ToSegmentSettingsOutput 

func (i SegmentSettingsArgs) ToSegmentSettingsOutput() SegmentSettingsOutput

func (SegmentSettingsArgs) ToSegmentSettingsOutputWithContext 

func (i SegmentSettingsArgs) ToSegmentSettingsOutputWithContext(ctx context.Context) SegmentSettingsOutput

func (SegmentSettingsArgs) ToSegmentSettingsPtrOutput 

func (i SegmentSettingsArgs) ToSegmentSettingsPtrOutput() SegmentSettingsPtrOutput

func (SegmentSettingsArgs) ToSegmentSettingsPtrOutputWithContext 

func (i SegmentSettingsArgs) ToSegmentSettingsPtrOutputWithContext(ctx context.Context) SegmentSettingsPtrOutput

type SegmentSettingsInput 

type SegmentSettingsInput interface {
	pulumi.Input

	ToSegmentSettingsOutput() SegmentSettingsOutput
	ToSegmentSettingsOutputWithContext(context.Context) SegmentSettingsOutput
}

SegmentSettingsInput is an input type that accepts SegmentSettingsArgs and SegmentSettingsOutput values. You can construct a concrete instance of `SegmentSettingsInput` via: 

SegmentSettingsArgs{...}

type SegmentSettingsOutput 

type SegmentSettingsOutput struct{ *pulumi.OutputState }

Segment settings for `ts`, `fmp4` and `vtt`.

func (SegmentSettingsOutput) ElementType 

func (SegmentSettingsOutput) ElementType() reflect.Type

func (SegmentSettingsOutput) IndividualSegments 

func (o SegmentSettingsOutput) IndividualSegments() pulumi.BoolOutput

Create an individual segment file. The default is `false`.

func (SegmentSettingsOutput) SegmentDuration 

func (o SegmentSettingsOutput) SegmentDuration() pulumi.StringPtrOutput

Duration of the segments in seconds. The default is `6.0s`. Note that `segmentDuration` must be greater than or equal to [`gopDuration`](#videostream), and `segmentDuration` must be divisible by [`gopDuration`](#videostream).

func (SegmentSettingsOutput) ToSegmentSettingsOutput 

func (o SegmentSettingsOutput) ToSegmentSettingsOutput() SegmentSettingsOutput

func (SegmentSettingsOutput) ToSegmentSettingsOutputWithContext 

func (o SegmentSettingsOutput) ToSegmentSettingsOutputWithContext(ctx context.Context) SegmentSettingsOutput

func (SegmentSettingsOutput) ToSegmentSettingsPtrOutput 

func (o SegmentSettingsOutput) ToSegmentSettingsPtrOutput() SegmentSettingsPtrOutput

func (SegmentSettingsOutput) ToSegmentSettingsPtrOutputWithContext 

func (o SegmentSettingsOutput) ToSegmentSettingsPtrOutputWithContext(ctx context.Context) SegmentSettingsPtrOutput

type SegmentSettingsPtrInput 

type SegmentSettingsPtrInput interface {
	pulumi.Input

	ToSegmentSettingsPtrOutput() SegmentSettingsPtrOutput
	ToSegmentSettingsPtrOutputWithContext(context.Context) SegmentSettingsPtrOutput
}

SegmentSettingsPtrInput is an input type that accepts SegmentSettingsArgs, SegmentSettingsPtr and SegmentSettingsPtrOutput values. You can construct a concrete instance of `SegmentSettingsPtrInput` via: 

        SegmentSettingsArgs{...}

or:

        nil

func SegmentSettingsPtr 

func SegmentSettingsPtr(v *SegmentSettingsArgs) SegmentSettingsPtrInput

type SegmentSettingsPtrOutput 

type SegmentSettingsPtrOutput struct{ *pulumi.OutputState }

func (SegmentSettingsPtrOutput) Elem 

func (o SegmentSettingsPtrOutput) Elem() SegmentSettingsOutput

func (SegmentSettingsPtrOutput) ElementType 

func (SegmentSettingsPtrOutput) ElementType() reflect.Type

func (SegmentSettingsPtrOutput) IndividualSegments 

func (o SegmentSettingsPtrOutput) IndividualSegments() pulumi.BoolPtrOutput

Create an individual segment file. The default is `false`.

func (SegmentSettingsPtrOutput) SegmentDuration 

func (o SegmentSettingsPtrOutput) SegmentDuration() pulumi.StringPtrOutput

Duration of the segments in seconds. The default is `6.0s`. Note that `segmentDuration` must be greater than or equal to [`gopDuration`](#videostream), and `segmentDuration` must be divisible by [`gopDuration`](#videostream).

func (SegmentSettingsPtrOutput) ToSegmentSettingsPtrOutput 

func (o SegmentSettingsPtrOutput) ToSegmentSettingsPtrOutput() SegmentSettingsPtrOutput

func (SegmentSettingsPtrOutput) ToSegmentSettingsPtrOutputWithContext 

func (o SegmentSettingsPtrOutput) ToSegmentSettingsPtrOutputWithContext(ctx context.Context) SegmentSettingsPtrOutput

type SegmentSettingsResponse 

type SegmentSettingsResponse struct {
	// Create an individual segment file. The default is `false`.
	IndividualSegments bool `pulumi:"individualSegments"`
	// Duration of the segments in seconds. The default is `6.0s`. Note that `segmentDuration` must be greater than or equal to [`gopDuration`](#videostream), and `segmentDuration` must be divisible by [`gopDuration`](#videostream).
	SegmentDuration string `pulumi:"segmentDuration"`
}

Segment settings for `ts`, `fmp4` and `vtt`.

type SegmentSettingsResponseOutput 

type SegmentSettingsResponseOutput struct{ *pulumi.OutputState }

Segment settings for `ts`, `fmp4` and `vtt`.

func (SegmentSettingsResponseOutput) ElementType 

func (SegmentSettingsResponseOutput) ElementType() reflect.Type

func (SegmentSettingsResponseOutput) IndividualSegments 

func (o SegmentSettingsResponseOutput) IndividualSegments() pulumi.BoolOutput

Create an individual segment file. The default is `false`.

func (SegmentSettingsResponseOutput) SegmentDuration 

func (o SegmentSettingsResponseOutput) SegmentDuration() pulumi.StringOutput

Duration of the segments in seconds. The default is `6.0s`. Note that `segmentDuration` must be greater than or equal to [`gopDuration`](#videostream), and `segmentDuration` must be divisible by [`gopDuration`](#videostream).

func (SegmentSettingsResponseOutput) ToSegmentSettingsResponseOutput 

func (o SegmentSettingsResponseOutput) ToSegmentSettingsResponseOutput() SegmentSettingsResponseOutput

func (SegmentSettingsResponseOutput) ToSegmentSettingsResponseOutputWithContext 

func (o SegmentSettingsResponseOutput) ToSegmentSettingsResponseOutputWithContext(ctx context.Context) SegmentSettingsResponseOutput

type SpriteSheet 

type SpriteSheet struct {
	// The maximum number of sprites per row in a sprite sheet. The default is 0, which indicates no maximum limit.
	ColumnCount *int `pulumi:"columnCount"`
	// End time in seconds, relative to the output file timeline. When `end_time_offset` is not specified, the sprites are generated until the end of the output file.
	EndTimeOffset *string `pulumi:"endTimeOffset"`
	// File name prefix for the generated sprite sheets. Each sprite sheet has an incremental 10-digit zero-padded suffix starting from 0 before the extension, such as `sprite_sheet0000000123.jpeg`.
	FilePrefix string `pulumi:"filePrefix"`
	// Format type. The default is `jpeg`. Supported formats: - `jpeg`
	Format *string `pulumi:"format"`
	// Starting from `0s`, create sprites at regular intervals. Specify the interval value in seconds.
	Interval *string `pulumi:"interval"`
	// The quality of the generated sprite sheet. Enter a value between 1 and 100, where 1 is the lowest quality and 100 is the highest quality. The default is 100. A high quality value corresponds to a low image data compression ratio.
	Quality *int `pulumi:"quality"`
	// The maximum number of rows per sprite sheet. When the sprite sheet is full, a new sprite sheet is created. The default is 0, which indicates no maximum limit.
	RowCount *int `pulumi:"rowCount"`
	// The height of sprite in pixels. Must be an even integer. To preserve the source aspect ratio, set the SpriteSheet.sprite_height_pixels field or the SpriteSheet.sprite_width_pixels field, but not both (the API will automatically calculate the missing field). For portrait videos that contain horizontal ASR and rotation metadata, provide the height, in pixels, per the horizontal ASR. The API calculates the width per the horizontal ASR. The API detects any rotation metadata and swaps the requested height and width for the output.
	SpriteHeightPixels int `pulumi:"spriteHeightPixels"`
	// The width of sprite in pixels. Must be an even integer. To preserve the source aspect ratio, set the SpriteSheet.sprite_width_pixels field or the SpriteSheet.sprite_height_pixels field, but not both (the API will automatically calculate the missing field). For portrait videos that contain horizontal ASR and rotation metadata, provide the width, in pixels, per the horizontal ASR. The API calculates the height per the horizontal ASR. The API detects any rotation metadata and swaps the requested height and width for the output.
	SpriteWidthPixels int `pulumi:"spriteWidthPixels"`
	// Start time in seconds, relative to the output file timeline. Determines the first sprite to pick. The default is `0s`.
	StartTimeOffset *string `pulumi:"startTimeOffset"`
	// Total number of sprites. Create the specified number of sprites distributed evenly across the timeline of the output media. The default is 100.
	TotalCount *int `pulumi:"totalCount"`
}

Sprite sheet configuration.

type SpriteSheetArgs 

type SpriteSheetArgs struct {
	// The maximum number of sprites per row in a sprite sheet. The default is 0, which indicates no maximum limit.
	ColumnCount pulumi.IntPtrInput `pulumi:"columnCount"`
	// End time in seconds, relative to the output file timeline. When `end_time_offset` is not specified, the sprites are generated until the end of the output file.
	EndTimeOffset pulumi.StringPtrInput `pulumi:"endTimeOffset"`
	// File name prefix for the generated sprite sheets. Each sprite sheet has an incremental 10-digit zero-padded suffix starting from 0 before the extension, such as `sprite_sheet0000000123.jpeg`.
	FilePrefix pulumi.StringInput `pulumi:"filePrefix"`
	// Format type. The default is `jpeg`. Supported formats: - `jpeg`
	Format pulumi.StringPtrInput `pulumi:"format"`
	// Starting from `0s`, create sprites at regular intervals. Specify the interval value in seconds.
	Interval pulumi.StringPtrInput `pulumi:"interval"`
	// The quality of the generated sprite sheet. Enter a value between 1 and 100, where 1 is the lowest quality and 100 is the highest quality. The default is 100. A high quality value corresponds to a low image data compression ratio.
	Quality pulumi.IntPtrInput `pulumi:"quality"`
	// The maximum number of rows per sprite sheet. When the sprite sheet is full, a new sprite sheet is created. The default is 0, which indicates no maximum limit.
	RowCount pulumi.IntPtrInput `pulumi:"rowCount"`
	// The height of sprite in pixels. Must be an even integer. To preserve the source aspect ratio, set the SpriteSheet.sprite_height_pixels field or the SpriteSheet.sprite_width_pixels field, but not both (the API will automatically calculate the missing field). For portrait videos that contain horizontal ASR and rotation metadata, provide the height, in pixels, per the horizontal ASR. The API calculates the width per the horizontal ASR. The API detects any rotation metadata and swaps the requested height and width for the output.
	SpriteHeightPixels pulumi.IntInput `pulumi:"spriteHeightPixels"`
	// The width of sprite in pixels. Must be an even integer. To preserve the source aspect ratio, set the SpriteSheet.sprite_width_pixels field or the SpriteSheet.sprite_height_pixels field, but not both (the API will automatically calculate the missing field). For portrait videos that contain horizontal ASR and rotation metadata, provide the width, in pixels, per the horizontal ASR. The API calculates the height per the horizontal ASR. The API detects any rotation metadata and swaps the requested height and width for the output.
	SpriteWidthPixels pulumi.IntInput `pulumi:"spriteWidthPixels"`
	// Start time in seconds, relative to the output file timeline. Determines the first sprite to pick. The default is `0s`.
	StartTimeOffset pulumi.StringPtrInput `pulumi:"startTimeOffset"`
	// Total number of sprites. Create the specified number of sprites distributed evenly across the timeline of the output media. The default is 100.
	TotalCount pulumi.IntPtrInput `pulumi:"totalCount"`
}

Sprite sheet configuration.

func (SpriteSheetArgs) ElementType 

func (SpriteSheetArgs) ElementType() reflect.Type

func (SpriteSheetArgs) ToSpriteSheetOutput 

func (i SpriteSheetArgs) ToSpriteSheetOutput() SpriteSheetOutput

func (SpriteSheetArgs) ToSpriteSheetOutputWithContext 

func (i SpriteSheetArgs) ToSpriteSheetOutputWithContext(ctx context.Context) SpriteSheetOutput

type SpriteSheetArray 

type SpriteSheetArray []SpriteSheetInput

func (SpriteSheetArray) ElementType 

func (SpriteSheetArray) ElementType() reflect.Type

func (SpriteSheetArray) ToSpriteSheetArrayOutput 

func (i SpriteSheetArray) ToSpriteSheetArrayOutput() SpriteSheetArrayOutput

func (SpriteSheetArray) ToSpriteSheetArrayOutputWithContext 

func (i SpriteSheetArray) ToSpriteSheetArrayOutputWithContext(ctx context.Context) SpriteSheetArrayOutput

type SpriteSheetArrayInput 

type SpriteSheetArrayInput interface {
	pulumi.Input

	ToSpriteSheetArrayOutput() SpriteSheetArrayOutput
	ToSpriteSheetArrayOutputWithContext(context.Context) SpriteSheetArrayOutput
}

SpriteSheetArrayInput is an input type that accepts SpriteSheetArray and SpriteSheetArrayOutput values. You can construct a concrete instance of `SpriteSheetArrayInput` via: 

SpriteSheetArray{ SpriteSheetArgs{...} }

type SpriteSheetArrayOutput 

type SpriteSheetArrayOutput struct{ *pulumi.OutputState }

func (SpriteSheetArrayOutput) ElementType 

func (SpriteSheetArrayOutput) ElementType() reflect.Type

func (SpriteSheetArrayOutput) Index 

func (o SpriteSheetArrayOutput) Index(i pulumi.IntInput) SpriteSheetOutput

func (SpriteSheetArrayOutput) ToSpriteSheetArrayOutput 

func (o SpriteSheetArrayOutput) ToSpriteSheetArrayOutput() SpriteSheetArrayOutput

func (SpriteSheetArrayOutput) ToSpriteSheetArrayOutputWithContext 

func (o SpriteSheetArrayOutput) ToSpriteSheetArrayOutputWithContext(ctx context.Context) SpriteSheetArrayOutput

type SpriteSheetInput 

type SpriteSheetInput interface {
	pulumi.Input

	ToSpriteSheetOutput() SpriteSheetOutput
	ToSpriteSheetOutputWithContext(context.Context) SpriteSheetOutput
}

SpriteSheetInput is an input type that accepts SpriteSheetArgs and SpriteSheetOutput values. You can construct a concrete instance of `SpriteSheetInput` via: 

SpriteSheetArgs{...}

type SpriteSheetOutput 

type SpriteSheetOutput struct{ *pulumi.OutputState }

Sprite sheet configuration.

func (SpriteSheetOutput) ColumnCount 

func (o SpriteSheetOutput) ColumnCount() pulumi.IntPtrOutput

The maximum number of sprites per row in a sprite sheet. The default is 0, which indicates no maximum limit.

func (SpriteSheetOutput) ElementType 

func (SpriteSheetOutput) ElementType() reflect.Type

func (SpriteSheetOutput) EndTimeOffset 

func (o SpriteSheetOutput) EndTimeOffset() pulumi.StringPtrOutput

End time in seconds, relative to the output file timeline. When `end_time_offset` is not specified, the sprites are generated until the end of the output file.

func (SpriteSheetOutput) FilePrefix 

func (o SpriteSheetOutput) FilePrefix() pulumi.StringOutput

File name prefix for the generated sprite sheets. Each sprite sheet has an incremental 10-digit zero-padded suffix starting from 0 before the extension, such as `sprite_sheet0000000123.jpeg`.

func (SpriteSheetOutput) Format 

func (o SpriteSheetOutput) Format() pulumi.StringPtrOutput

Format type. The default is `jpeg`. Supported formats: - `jpeg`

func (SpriteSheetOutput) Interval 

func (o SpriteSheetOutput) Interval() pulumi.StringPtrOutput

Starting from `0s`, create sprites at regular intervals. Specify the interval value in seconds.

func (SpriteSheetOutput) Quality 

func (o SpriteSheetOutput) Quality() pulumi.IntPtrOutput

The quality of the generated sprite sheet. Enter a value between 1 and 100, where 1 is the lowest quality and 100 is the highest quality. The default is 100. A high quality value corresponds to a low image data compression ratio.

func (SpriteSheetOutput) RowCount 

func (o SpriteSheetOutput) RowCount() pulumi.IntPtrOutput

The maximum number of rows per sprite sheet. When the sprite sheet is full, a new sprite sheet is created. The default is 0, which indicates no maximum limit.

func (SpriteSheetOutput) SpriteHeightPixels 

func (o SpriteSheetOutput) SpriteHeightPixels() pulumi.IntOutput

The height of sprite in pixels. Must be an even integer. To preserve the source aspect ratio, set the SpriteSheet.sprite_height_pixels field or the SpriteSheet.sprite_width_pixels field, but not both (the API will automatically calculate the missing field). For portrait videos that contain horizontal ASR and rotation metadata, provide the height, in pixels, per the horizontal ASR. The API calculates the width per the horizontal ASR. The API detects any rotation metadata and swaps the requested height and width for the output.

func (SpriteSheetOutput) SpriteWidthPixels 

func (o SpriteSheetOutput) SpriteWidthPixels() pulumi.IntOutput

The width of sprite in pixels. Must be an even integer. To preserve the source aspect ratio, set the SpriteSheet.sprite_width_pixels field or the SpriteSheet.sprite_height_pixels field, but not both (the API will automatically calculate the missing field). For portrait videos that contain horizontal ASR and rotation metadata, provide the width, in pixels, per the horizontal ASR. The API calculates the height per the horizontal ASR. The API detects any rotation metadata and swaps the requested height and width for the output.

func (SpriteSheetOutput) StartTimeOffset 

func (o SpriteSheetOutput) StartTimeOffset() pulumi.StringPtrOutput

Start time in seconds, relative to the output file timeline. Determines the first sprite to pick. The default is `0s`.

func (SpriteSheetOutput) ToSpriteSheetOutput 

func (o SpriteSheetOutput) ToSpriteSheetOutput() SpriteSheetOutput

func (SpriteSheetOutput) ToSpriteSheetOutputWithContext 

func (o SpriteSheetOutput) ToSpriteSheetOutputWithContext(ctx context.Context) SpriteSheetOutput

func (SpriteSheetOutput) TotalCount 

func (o SpriteSheetOutput) TotalCount() pulumi.IntPtrOutput

Total number of sprites. Create the specified number of sprites distributed evenly across the timeline of the output media. The default is 100.

type SpriteSheetResponse 

type SpriteSheetResponse struct {
	// The maximum number of sprites per row in a sprite sheet. The default is 0, which indicates no maximum limit.
	ColumnCount int `pulumi:"columnCount"`
	// End time in seconds, relative to the output file timeline. When `end_time_offset` is not specified, the sprites are generated until the end of the output file.
	EndTimeOffset string `pulumi:"endTimeOffset"`
	// File name prefix for the generated sprite sheets. Each sprite sheet has an incremental 10-digit zero-padded suffix starting from 0 before the extension, such as `sprite_sheet0000000123.jpeg`.
	FilePrefix string `pulumi:"filePrefix"`
	// Format type. The default is `jpeg`. Supported formats: - `jpeg`
	Format string `pulumi:"format"`
	// Starting from `0s`, create sprites at regular intervals. Specify the interval value in seconds.
	Interval string `pulumi:"interval"`
	// The quality of the generated sprite sheet. Enter a value between 1 and 100, where 1 is the lowest quality and 100 is the highest quality. The default is 100. A high quality value corresponds to a low image data compression ratio.
	Quality int `pulumi:"quality"`
	// The maximum number of rows per sprite sheet. When the sprite sheet is full, a new sprite sheet is created. The default is 0, which indicates no maximum limit.
	RowCount int `pulumi:"rowCount"`
	// The height of sprite in pixels. Must be an even integer. To preserve the source aspect ratio, set the SpriteSheet.sprite_height_pixels field or the SpriteSheet.sprite_width_pixels field, but not both (the API will automatically calculate the missing field). For portrait videos that contain horizontal ASR and rotation metadata, provide the height, in pixels, per the horizontal ASR. The API calculates the width per the horizontal ASR. The API detects any rotation metadata and swaps the requested height and width for the output.
	SpriteHeightPixels int `pulumi:"spriteHeightPixels"`
	// The width of sprite in pixels. Must be an even integer. To preserve the source aspect ratio, set the SpriteSheet.sprite_width_pixels field or the SpriteSheet.sprite_height_pixels field, but not both (the API will automatically calculate the missing field). For portrait videos that contain horizontal ASR and rotation metadata, provide the width, in pixels, per the horizontal ASR. The API calculates the height per the horizontal ASR. The API detects any rotation metadata and swaps the requested height and width for the output.
	SpriteWidthPixels int `pulumi:"spriteWidthPixels"`
	// Start time in seconds, relative to the output file timeline. Determines the first sprite to pick. The default is `0s`.
	StartTimeOffset string `pulumi:"startTimeOffset"`
	// Total number of sprites. Create the specified number of sprites distributed evenly across the timeline of the output media. The default is 100.
	TotalCount int `pulumi:"totalCount"`
}

Sprite sheet configuration.

type SpriteSheetResponseArrayOutput 

type SpriteSheetResponseArrayOutput struct{ *pulumi.OutputState }

func (SpriteSheetResponseArrayOutput) ElementType 

func (SpriteSheetResponseArrayOutput) ElementType() reflect.Type

func (SpriteSheetResponseArrayOutput) Index 

func (o SpriteSheetResponseArrayOutput) Index(i pulumi.IntInput) SpriteSheetResponseOutput

func (SpriteSheetResponseArrayOutput) ToSpriteSheetResponseArrayOutput 

func (o SpriteSheetResponseArrayOutput) ToSpriteSheetResponseArrayOutput() SpriteSheetResponseArrayOutput

func (SpriteSheetResponseArrayOutput) ToSpriteSheetResponseArrayOutputWithContext 

func (o SpriteSheetResponseArrayOutput) ToSpriteSheetResponseArrayOutputWithContext(ctx context.Context) SpriteSheetResponseArrayOutput

type SpriteSheetResponseOutput 

type SpriteSheetResponseOutput struct{ *pulumi.OutputState }

Sprite sheet configuration.

func (SpriteSheetResponseOutput) ColumnCount 

func (o SpriteSheetResponseOutput) ColumnCount() pulumi.IntOutput

The maximum number of sprites per row in a sprite sheet. The default is 0, which indicates no maximum limit.

func (SpriteSheetResponseOutput) ElementType 

func (SpriteSheetResponseOutput) ElementType() reflect.Type

func (SpriteSheetResponseOutput) EndTimeOffset 

func (o SpriteSheetResponseOutput) EndTimeOffset() pulumi.StringOutput

End time in seconds, relative to the output file timeline. When `end_time_offset` is not specified, the sprites are generated until the end of the output file.

func (SpriteSheetResponseOutput) FilePrefix 

func (o SpriteSheetResponseOutput) FilePrefix() pulumi.StringOutput

File name prefix for the generated sprite sheets. Each sprite sheet has an incremental 10-digit zero-padded suffix starting from 0 before the extension, such as `sprite_sheet0000000123.jpeg`.

func (SpriteSheetResponseOutput) Format 

func (o SpriteSheetResponseOutput) Format() pulumi.StringOutput

Format type. The default is `jpeg`. Supported formats: - `jpeg`

func (SpriteSheetResponseOutput) Interval 

func (o SpriteSheetResponseOutput) Interval() pulumi.StringOutput

Starting from `0s`, create sprites at regular intervals. Specify the interval value in seconds.

func (SpriteSheetResponseOutput) Quality 

func (o SpriteSheetResponseOutput) Quality() pulumi.IntOutput

The quality of the generated sprite sheet. Enter a value between 1 and 100, where 1 is the lowest quality and 100 is the highest quality. The default is 100. A high quality value corresponds to a low image data compression ratio.

func (SpriteSheetResponseOutput) RowCount 

func (o SpriteSheetResponseOutput) RowCount() pulumi.IntOutput

The maximum number of rows per sprite sheet. When the sprite sheet is full, a new sprite sheet is created. The default is 0, which indicates no maximum limit.

func (SpriteSheetResponseOutput) SpriteHeightPixels 

func (o SpriteSheetResponseOutput) SpriteHeightPixels() pulumi.IntOutput

The height of sprite in pixels. Must be an even integer. To preserve the source aspect ratio, set the SpriteSheet.sprite_height_pixels field or the SpriteSheet.sprite_width_pixels field, but not both (the API will automatically calculate the missing field). For portrait videos that contain horizontal ASR and rotation metadata, provide the height, in pixels, per the horizontal ASR. The API calculates the width per the horizontal ASR. The API detects any rotation metadata and swaps the requested height and width for the output.

func (SpriteSheetResponseOutput) SpriteWidthPixels 

func (o SpriteSheetResponseOutput) SpriteWidthPixels() pulumi.IntOutput

The width of sprite in pixels. Must be an even integer. To preserve the source aspect ratio, set the SpriteSheet.sprite_width_pixels field or the SpriteSheet.sprite_height_pixels field, but not both (the API will automatically calculate the missing field). For portrait videos that contain horizontal ASR and rotation metadata, provide the width, in pixels, per the horizontal ASR. The API calculates the height per the horizontal ASR. The API detects any rotation metadata and swaps the requested height and width for the output.

func (SpriteSheetResponseOutput) StartTimeOffset 

func (o SpriteSheetResponseOutput) StartTimeOffset() pulumi.StringOutput

Start time in seconds, relative to the output file timeline. Determines the first sprite to pick. The default is `0s`.

func (SpriteSheetResponseOutput) ToSpriteSheetResponseOutput 

func (o SpriteSheetResponseOutput) ToSpriteSheetResponseOutput() SpriteSheetResponseOutput

func (SpriteSheetResponseOutput) ToSpriteSheetResponseOutputWithContext 

func (o SpriteSheetResponseOutput) ToSpriteSheetResponseOutputWithContext(ctx context.Context) SpriteSheetResponseOutput

func (SpriteSheetResponseOutput) TotalCount 

func (o SpriteSheetResponseOutput) TotalCount() pulumi.IntOutput

Total number of sprites. Create the specified number of sprites distributed evenly across the timeline of the output media. The default is 100.

type StatusResponse 

type StatusResponse struct {
	// The status code, which should be an enum value of google.rpc.Code.
	Code int `pulumi:"code"`
	// A list of messages that carry the error details. There is a common set of message types for APIs to use.
	Details []map[string]interface{} `pulumi:"details"`
	// A developer-facing error message, which should be in English. Any user-facing error message should be localized and sent in the google.rpc.Status.details field, or localized by the client.
	Message string `pulumi:"message"`
}

The `Status` type defines a logical error model that is suitable for different programming environments, including REST APIs and RPC APIs. It is used by [gRPC](https://github.com/grpc). Each `Status` message contains three pieces of data: error code, error message, and error details. You can find out more about this error model and how to work with it in the [API Design Guide](https://cloud.google.com/apis/design/errors).

type StatusResponseOutput 

type StatusResponseOutput struct{ *pulumi.OutputState }

The `Status` type defines a logical error model that is suitable for different programming environments, including REST APIs and RPC APIs. It is used by [gRPC](https://github.com/grpc). Each `Status` message contains three pieces of data: error code, error message, and error details. You can find out more about this error model and how to work with it in the [API Design Guide](https://cloud.google.com/apis/design/errors).

func (StatusResponseOutput) Code 

func (o StatusResponseOutput) Code() pulumi.IntOutput

The status code, which should be an enum value of google.rpc.Code.

func (StatusResponseOutput) Details 

func (o StatusResponseOutput) Details() pulumi.MapArrayOutput

A list of messages that carry the error details. There is a common set of message types for APIs to use.

func (StatusResponseOutput) ElementType 

func (StatusResponseOutput) ElementType() reflect.Type

func (StatusResponseOutput) Message 

func (o StatusResponseOutput) Message() pulumi.StringOutput

A developer-facing error message, which should be in English. Any user-facing error message should be localized and sent in the google.rpc.Status.details field, or localized by the client.

func (StatusResponseOutput) ToStatusResponseOutput 

func (o StatusResponseOutput) ToStatusResponseOutput() StatusResponseOutput

func (StatusResponseOutput) ToStatusResponseOutputWithContext 

func (o StatusResponseOutput) ToStatusResponseOutputWithContext(ctx context.Context) StatusResponseOutput

type TextMapping 

type TextMapping struct {
	// The EditAtom.key that references atom with text inputs in the JobConfig.edit_list.
	AtomKey string `pulumi:"atomKey"`
	// The Input.key that identifies the input file.
	InputKey string `pulumi:"inputKey"`
	// The zero-based index of the track in the input file.
	InputTrack int `pulumi:"inputTrack"`
}

The mapping for the JobConfig.edit_list atoms with text EditAtom.inputs.

type TextMappingArgs 

type TextMappingArgs struct {
	// The EditAtom.key that references atom with text inputs in the JobConfig.edit_list.
	AtomKey pulumi.StringInput `pulumi:"atomKey"`
	// The Input.key that identifies the input file.
	InputKey pulumi.StringInput `pulumi:"inputKey"`
	// The zero-based index of the track in the input file.
	InputTrack pulumi.IntInput `pulumi:"inputTrack"`
}

The mapping for the JobConfig.edit_list atoms with text EditAtom.inputs.

func (TextMappingArgs) ElementType 

func (TextMappingArgs) ElementType() reflect.Type

func (TextMappingArgs) ToTextMappingOutput 

func (i TextMappingArgs) ToTextMappingOutput() TextMappingOutput

func (TextMappingArgs) ToTextMappingOutputWithContext 

func (i TextMappingArgs) ToTextMappingOutputWithContext(ctx context.Context) TextMappingOutput

type TextMappingArray 

type TextMappingArray []TextMappingInput

func (TextMappingArray) ElementType 

func (TextMappingArray) ElementType() reflect.Type

func (TextMappingArray) ToTextMappingArrayOutput 

func (i TextMappingArray) ToTextMappingArrayOutput() TextMappingArrayOutput

func (TextMappingArray) ToTextMappingArrayOutputWithContext 

func (i TextMappingArray) ToTextMappingArrayOutputWithContext(ctx context.Context) TextMappingArrayOutput

type TextMappingArrayInput 

type TextMappingArrayInput interface {
	pulumi.Input

	ToTextMappingArrayOutput() TextMappingArrayOutput
	ToTextMappingArrayOutputWithContext(context.Context) TextMappingArrayOutput
}

TextMappingArrayInput is an input type that accepts TextMappingArray and TextMappingArrayOutput values. You can construct a concrete instance of `TextMappingArrayInput` via: 

TextMappingArray{ TextMappingArgs{...} }

type TextMappingArrayOutput 

type TextMappingArrayOutput struct{ *pulumi.OutputState }

func (TextMappingArrayOutput) ElementType 

func (TextMappingArrayOutput) ElementType() reflect.Type

func (TextMappingArrayOutput) Index 

func (o TextMappingArrayOutput) Index(i pulumi.IntInput) TextMappingOutput

func (TextMappingArrayOutput) ToTextMappingArrayOutput 

func (o TextMappingArrayOutput) ToTextMappingArrayOutput() TextMappingArrayOutput

func (TextMappingArrayOutput) ToTextMappingArrayOutputWithContext 

func (o TextMappingArrayOutput) ToTextMappingArrayOutputWithContext(ctx context.Context) TextMappingArrayOutput

type TextMappingInput 

type TextMappingInput interface {
	pulumi.Input

	ToTextMappingOutput() TextMappingOutput
	ToTextMappingOutputWithContext(context.Context) TextMappingOutput
}

TextMappingInput is an input type that accepts TextMappingArgs and TextMappingOutput values. You can construct a concrete instance of `TextMappingInput` via: 

TextMappingArgs{...}

type TextMappingOutput 

type TextMappingOutput struct{ *pulumi.OutputState }

The mapping for the JobConfig.edit_list atoms with text EditAtom.inputs.

func (TextMappingOutput) AtomKey 

func (o TextMappingOutput) AtomKey() pulumi.StringOutput

The EditAtom.key that references atom with text inputs in the JobConfig.edit_list.

func (TextMappingOutput) ElementType 

func (TextMappingOutput) ElementType() reflect.Type

func (TextMappingOutput) InputKey 

func (o TextMappingOutput) InputKey() pulumi.StringOutput

The Input.key that identifies the input file.

func (TextMappingOutput) InputTrack 

func (o TextMappingOutput) InputTrack() pulumi.IntOutput

The zero-based index of the track in the input file.

func (TextMappingOutput) ToTextMappingOutput 

func (o TextMappingOutput) ToTextMappingOutput() TextMappingOutput

func (TextMappingOutput) ToTextMappingOutputWithContext 

func (o TextMappingOutput) ToTextMappingOutputWithContext(ctx context.Context) TextMappingOutput

type TextMappingResponse 

type TextMappingResponse struct {
	// The EditAtom.key that references atom with text inputs in the JobConfig.edit_list.
	AtomKey string `pulumi:"atomKey"`
	// The Input.key that identifies the input file.
	InputKey string `pulumi:"inputKey"`
	// The zero-based index of the track in the input file.
	InputTrack int `pulumi:"inputTrack"`
}

The mapping for the JobConfig.edit_list atoms with text EditAtom.inputs.

type TextMappingResponseArrayOutput 

type TextMappingResponseArrayOutput struct{ *pulumi.OutputState }

func (TextMappingResponseArrayOutput) ElementType 

func (TextMappingResponseArrayOutput) ElementType() reflect.Type

func (TextMappingResponseArrayOutput) Index 

func (o TextMappingResponseArrayOutput) Index(i pulumi.IntInput) TextMappingResponseOutput

func (TextMappingResponseArrayOutput) ToTextMappingResponseArrayOutput 

func (o TextMappingResponseArrayOutput) ToTextMappingResponseArrayOutput() TextMappingResponseArrayOutput

func (TextMappingResponseArrayOutput) ToTextMappingResponseArrayOutputWithContext 

func (o TextMappingResponseArrayOutput) ToTextMappingResponseArrayOutputWithContext(ctx context.Context) TextMappingResponseArrayOutput

type TextMappingResponseOutput 

type TextMappingResponseOutput struct{ *pulumi.OutputState }

The mapping for the JobConfig.edit_list atoms with text EditAtom.inputs.

func (TextMappingResponseOutput) AtomKey 

func (o TextMappingResponseOutput) AtomKey() pulumi.StringOutput

The EditAtom.key that references atom with text inputs in the JobConfig.edit_list.

func (TextMappingResponseOutput) ElementType 

func (TextMappingResponseOutput) ElementType() reflect.Type

func (TextMappingResponseOutput) InputKey 

func (o TextMappingResponseOutput) InputKey() pulumi.StringOutput

The Input.key that identifies the input file.

func (TextMappingResponseOutput) InputTrack 

func (o TextMappingResponseOutput) InputTrack() pulumi.IntOutput

The zero-based index of the track in the input file.

func (TextMappingResponseOutput) ToTextMappingResponseOutput 

func (o TextMappingResponseOutput) ToTextMappingResponseOutput() TextMappingResponseOutput

func (TextMappingResponseOutput) ToTextMappingResponseOutputWithContext 

func (o TextMappingResponseOutput) ToTextMappingResponseOutputWithContext(ctx context.Context) TextMappingResponseOutput

type TextStream 

type TextStream struct {
	// The codec for this text stream. The default is `webvtt`. Supported text codecs: - `srt` - `ttml` - `cea608` - `cea708` - `webvtt`
	Codec *string `pulumi:"codec"`
	// The name for this particular text stream that will be added to the HLS/DASH manifest. Not supported in MP4 files.
	DisplayName *string `pulumi:"displayName"`
	// The BCP-47 language code, such as `en-US` or `sr-Latn`. For more information, see https://www.unicode.org/reports/tr35/#Unicode_locale_identifier. Not supported in MP4 files.
	LanguageCode *string `pulumi:"languageCode"`
	// The mapping for the JobConfig.edit_list atoms with text EditAtom.inputs.
	Mapping []TextMapping `pulumi:"mapping"`
}

Encoding of a text stream. For example, closed captions or subtitles.

type TextStreamArgs 

type TextStreamArgs struct {
	// The codec for this text stream. The default is `webvtt`. Supported text codecs: - `srt` - `ttml` - `cea608` - `cea708` - `webvtt`
	Codec pulumi.StringPtrInput `pulumi:"codec"`
	// The name for this particular text stream that will be added to the HLS/DASH manifest. Not supported in MP4 files.
	DisplayName pulumi.StringPtrInput `pulumi:"displayName"`
	// The BCP-47 language code, such as `en-US` or `sr-Latn`. For more information, see https://www.unicode.org/reports/tr35/#Unicode_locale_identifier. Not supported in MP4 files.
	LanguageCode pulumi.StringPtrInput `pulumi:"languageCode"`
	// The mapping for the JobConfig.edit_list atoms with text EditAtom.inputs.
	Mapping TextMappingArrayInput `pulumi:"mapping"`
}

Encoding of a text stream. For example, closed captions or subtitles.

func (TextStreamArgs) ElementType 

func (TextStreamArgs) ElementType() reflect.Type

func (TextStreamArgs) ToTextStreamOutput 

func (i TextStreamArgs) ToTextStreamOutput() TextStreamOutput

func (TextStreamArgs) ToTextStreamOutputWithContext 

func (i TextStreamArgs) ToTextStreamOutputWithContext(ctx context.Context) TextStreamOutput

func (TextStreamArgs) ToTextStreamPtrOutput 

func (i TextStreamArgs) ToTextStreamPtrOutput() TextStreamPtrOutput

func (TextStreamArgs) ToTextStreamPtrOutputWithContext 

func (i TextStreamArgs) ToTextStreamPtrOutputWithContext(ctx context.Context) TextStreamPtrOutput

type TextStreamInput 

type TextStreamInput interface {
	pulumi.Input

	ToTextStreamOutput() TextStreamOutput
	ToTextStreamOutputWithContext(context.Context) TextStreamOutput
}

TextStreamInput is an input type that accepts TextStreamArgs and TextStreamOutput values. You can construct a concrete instance of `TextStreamInput` via: 

TextStreamArgs{...}

type TextStreamOutput 

type TextStreamOutput struct{ *pulumi.OutputState }

Encoding of a text stream. For example, closed captions or subtitles.

func (TextStreamOutput) Codec 

func (o TextStreamOutput) Codec() pulumi.StringPtrOutput

The codec for this text stream. The default is `webvtt`. Supported text codecs: - `srt` - `ttml` - `cea608` - `cea708` - `webvtt`

func (TextStreamOutput) DisplayName added in v0.29.0 

func (o TextStreamOutput) DisplayName() pulumi.StringPtrOutput

The name for this particular text stream that will be added to the HLS/DASH manifest. Not supported in MP4 files.

func (TextStreamOutput) ElementType 

func (TextStreamOutput) ElementType() reflect.Type

func (TextStreamOutput) LanguageCode added in v0.29.0 

func (o TextStreamOutput) LanguageCode() pulumi.StringPtrOutput

The BCP-47 language code, such as `en-US` or `sr-Latn`. For more information, see https://www.unicode.org/reports/tr35/#Unicode_locale_identifier. Not supported in MP4 files.

func (TextStreamOutput) Mapping 

func (o TextStreamOutput) Mapping() TextMappingArrayOutput

The mapping for the JobConfig.edit_list atoms with text EditAtom.inputs.

func (TextStreamOutput) ToTextStreamOutput 

func (o TextStreamOutput) ToTextStreamOutput() TextStreamOutput

func (TextStreamOutput) ToTextStreamOutputWithContext 

func (o TextStreamOutput) ToTextStreamOutputWithContext(ctx context.Context) TextStreamOutput

func (TextStreamOutput) ToTextStreamPtrOutput 

func (o TextStreamOutput) ToTextStreamPtrOutput() TextStreamPtrOutput

func (TextStreamOutput) ToTextStreamPtrOutputWithContext 

func (o TextStreamOutput) ToTextStreamPtrOutputWithContext(ctx context.Context) TextStreamPtrOutput

type TextStreamPtrInput 

type TextStreamPtrInput interface {
	pulumi.Input

	ToTextStreamPtrOutput() TextStreamPtrOutput
	ToTextStreamPtrOutputWithContext(context.Context) TextStreamPtrOutput
}

TextStreamPtrInput is an input type that accepts TextStreamArgs, TextStreamPtr and TextStreamPtrOutput values. You can construct a concrete instance of `TextStreamPtrInput` via: 

        TextStreamArgs{...}

or:

        nil

func TextStreamPtr 

func TextStreamPtr(v *TextStreamArgs) TextStreamPtrInput

type TextStreamPtrOutput 

type TextStreamPtrOutput struct{ *pulumi.OutputState }

func (TextStreamPtrOutput) Codec 

func (o TextStreamPtrOutput) Codec() pulumi.StringPtrOutput

The codec for this text stream. The default is `webvtt`. Supported text codecs: - `srt` - `ttml` - `cea608` - `cea708` - `webvtt`

func (TextStreamPtrOutput) DisplayName added in v0.29.0 

func (o TextStreamPtrOutput) DisplayName() pulumi.StringPtrOutput

The name for this particular text stream that will be added to the HLS/DASH manifest. Not supported in MP4 files.

func (TextStreamPtrOutput) Elem 

func (o TextStreamPtrOutput) Elem() TextStreamOutput

func (TextStreamPtrOutput) ElementType 

func (TextStreamPtrOutput) ElementType() reflect.Type

func (TextStreamPtrOutput) LanguageCode added in v0.29.0 

func (o TextStreamPtrOutput) LanguageCode() pulumi.StringPtrOutput

The BCP-47 language code, such as `en-US` or `sr-Latn`. For more information, see https://www.unicode.org/reports/tr35/#Unicode_locale_identifier. Not supported in MP4 files.

func (TextStreamPtrOutput) Mapping 

func (o TextStreamPtrOutput) Mapping() TextMappingArrayOutput

The mapping for the JobConfig.edit_list atoms with text EditAtom.inputs.

func (TextStreamPtrOutput) ToTextStreamPtrOutput 

func (o TextStreamPtrOutput) ToTextStreamPtrOutput() TextStreamPtrOutput

func (TextStreamPtrOutput) ToTextStreamPtrOutputWithContext 

func (o TextStreamPtrOutput) ToTextStreamPtrOutputWithContext(ctx context.Context) TextStreamPtrOutput

type TextStreamResponse 

type TextStreamResponse struct {
	// The codec for this text stream. The default is `webvtt`. Supported text codecs: - `srt` - `ttml` - `cea608` - `cea708` - `webvtt`
	Codec string `pulumi:"codec"`
	// The name for this particular text stream that will be added to the HLS/DASH manifest. Not supported in MP4 files.
	DisplayName string `pulumi:"displayName"`
	// The BCP-47 language code, such as `en-US` or `sr-Latn`. For more information, see https://www.unicode.org/reports/tr35/#Unicode_locale_identifier. Not supported in MP4 files.
	LanguageCode string `pulumi:"languageCode"`
	// The mapping for the JobConfig.edit_list atoms with text EditAtom.inputs.
	Mapping []TextMappingResponse `pulumi:"mapping"`
}

Encoding of a text stream. For example, closed captions or subtitles.

type TextStreamResponseOutput 

type TextStreamResponseOutput struct{ *pulumi.OutputState }

Encoding of a text stream. For example, closed captions or subtitles.

func (TextStreamResponseOutput) Codec 

func (o TextStreamResponseOutput) Codec() pulumi.StringOutput

The codec for this text stream. The default is `webvtt`. Supported text codecs: - `srt` - `ttml` - `cea608` - `cea708` - `webvtt`

func (TextStreamResponseOutput) DisplayName added in v0.29.0 

func (o TextStreamResponseOutput) DisplayName() pulumi.StringOutput

The name for this particular text stream that will be added to the HLS/DASH manifest. Not supported in MP4 files.

func (TextStreamResponseOutput) ElementType 

func (TextStreamResponseOutput) ElementType() reflect.Type

func (TextStreamResponseOutput) LanguageCode added in v0.29.0 

func (o TextStreamResponseOutput) LanguageCode() pulumi.StringOutput

The BCP-47 language code, such as `en-US` or `sr-Latn`. For more information, see https://www.unicode.org/reports/tr35/#Unicode_locale_identifier. Not supported in MP4 files.

func (TextStreamResponseOutput) Mapping 

func (o TextStreamResponseOutput) Mapping() TextMappingResponseArrayOutput

The mapping for the JobConfig.edit_list atoms with text EditAtom.inputs.

func (TextStreamResponseOutput) ToTextStreamResponseOutput 

func (o TextStreamResponseOutput) ToTextStreamResponseOutput() TextStreamResponseOutput

func (TextStreamResponseOutput) ToTextStreamResponseOutputWithContext 

func (o TextStreamResponseOutput) ToTextStreamResponseOutputWithContext(ctx context.Context) TextStreamResponseOutput

type VideoStream 

type VideoStream struct {
	// H264 codec settings.
	H264 *H264CodecSettings `pulumi:"h264"`
	// H265 codec settings.
	H265 *H265CodecSettings `pulumi:"h265"`
	// VP9 codec settings.
	Vp9 *Vp9CodecSettings `pulumi:"vp9"`
}

Video stream resource.

type VideoStreamArgs 

type VideoStreamArgs struct {
	// H264 codec settings.
	H264 H264CodecSettingsPtrInput `pulumi:"h264"`
	// H265 codec settings.
	H265 H265CodecSettingsPtrInput `pulumi:"h265"`
	// VP9 codec settings.
	Vp9 Vp9CodecSettingsPtrInput `pulumi:"vp9"`
}

Video stream resource.

func (VideoStreamArgs) ElementType 

func (VideoStreamArgs) ElementType() reflect.Type

func (VideoStreamArgs) ToVideoStreamOutput 

func (i VideoStreamArgs) ToVideoStreamOutput() VideoStreamOutput

func (VideoStreamArgs) ToVideoStreamOutputWithContext 

func (i VideoStreamArgs) ToVideoStreamOutputWithContext(ctx context.Context) VideoStreamOutput

func (VideoStreamArgs) ToVideoStreamPtrOutput 

func (i VideoStreamArgs) ToVideoStreamPtrOutput() VideoStreamPtrOutput

func (VideoStreamArgs) ToVideoStreamPtrOutputWithContext 

func (i VideoStreamArgs) ToVideoStreamPtrOutputWithContext(ctx context.Context) VideoStreamPtrOutput

type VideoStreamInput 

type VideoStreamInput interface {
	pulumi.Input

	ToVideoStreamOutput() VideoStreamOutput
	ToVideoStreamOutputWithContext(context.Context) VideoStreamOutput
}

VideoStreamInput is an input type that accepts VideoStreamArgs and VideoStreamOutput values. You can construct a concrete instance of `VideoStreamInput` via: 

VideoStreamArgs{...}

type VideoStreamOutput 

type VideoStreamOutput struct{ *pulumi.OutputState }

Video stream resource.

func (VideoStreamOutput) ElementType 

func (VideoStreamOutput) ElementType() reflect.Type

func (VideoStreamOutput) H264 

func (o VideoStreamOutput) H264() H264CodecSettingsPtrOutput

H264 codec settings.

func (VideoStreamOutput) H265 

func (o VideoStreamOutput) H265() H265CodecSettingsPtrOutput

H265 codec settings.

func (VideoStreamOutput) ToVideoStreamOutput 

func (o VideoStreamOutput) ToVideoStreamOutput() VideoStreamOutput

func (VideoStreamOutput) ToVideoStreamOutputWithContext 

func (o VideoStreamOutput) ToVideoStreamOutputWithContext(ctx context.Context) VideoStreamOutput

func (VideoStreamOutput) ToVideoStreamPtrOutput 

func (o VideoStreamOutput) ToVideoStreamPtrOutput() VideoStreamPtrOutput

func (VideoStreamOutput) ToVideoStreamPtrOutputWithContext 

func (o VideoStreamOutput) ToVideoStreamPtrOutputWithContext(ctx context.Context) VideoStreamPtrOutput

func (VideoStreamOutput) Vp9 

func (o VideoStreamOutput) Vp9() Vp9CodecSettingsPtrOutput

VP9 codec settings.

type VideoStreamPtrInput 

type VideoStreamPtrInput interface {
	pulumi.Input

	ToVideoStreamPtrOutput() VideoStreamPtrOutput
	ToVideoStreamPtrOutputWithContext(context.Context) VideoStreamPtrOutput
}

VideoStreamPtrInput is an input type that accepts VideoStreamArgs, VideoStreamPtr and VideoStreamPtrOutput values. You can construct a concrete instance of `VideoStreamPtrInput` via: 

        VideoStreamArgs{...}

or:

        nil

func VideoStreamPtr 

func VideoStreamPtr(v *VideoStreamArgs) VideoStreamPtrInput

type VideoStreamPtrOutput 

type VideoStreamPtrOutput struct{ *pulumi.OutputState }

func (VideoStreamPtrOutput) Elem 

func (o VideoStreamPtrOutput) Elem() VideoStreamOutput

func (VideoStreamPtrOutput) ElementType 

func (VideoStreamPtrOutput) ElementType() reflect.Type

func (VideoStreamPtrOutput) H264 

func (o VideoStreamPtrOutput) H264() H264CodecSettingsPtrOutput

H264 codec settings.

func (VideoStreamPtrOutput) H265 

func (o VideoStreamPtrOutput) H265() H265CodecSettingsPtrOutput

H265 codec settings.

func (VideoStreamPtrOutput) ToVideoStreamPtrOutput 

func (o VideoStreamPtrOutput) ToVideoStreamPtrOutput() VideoStreamPtrOutput

func (VideoStreamPtrOutput) ToVideoStreamPtrOutputWithContext 

func (o VideoStreamPtrOutput) ToVideoStreamPtrOutputWithContext(ctx context.Context) VideoStreamPtrOutput

func (VideoStreamPtrOutput) Vp9 

func (o VideoStreamPtrOutput) Vp9() Vp9CodecSettingsPtrOutput

VP9 codec settings.

type VideoStreamResponse 

type VideoStreamResponse struct {
	// H264 codec settings.
	H264 H264CodecSettingsResponse `pulumi:"h264"`
	// H265 codec settings.
	H265 H265CodecSettingsResponse `pulumi:"h265"`
	// VP9 codec settings.
	Vp9 Vp9CodecSettingsResponse `pulumi:"vp9"`
}

Video stream resource.

type VideoStreamResponseOutput 

type VideoStreamResponseOutput struct{ *pulumi.OutputState }

Video stream resource.

func (VideoStreamResponseOutput) ElementType 

func (VideoStreamResponseOutput) ElementType() reflect.Type

func (VideoStreamResponseOutput) H264 

func (o VideoStreamResponseOutput) H264() H264CodecSettingsResponseOutput

H264 codec settings.

func (VideoStreamResponseOutput) H265 

func (o VideoStreamResponseOutput) H265() H265CodecSettingsResponseOutput

H265 codec settings.

func (VideoStreamResponseOutput) ToVideoStreamResponseOutput 

func (o VideoStreamResponseOutput) ToVideoStreamResponseOutput() VideoStreamResponseOutput

func (VideoStreamResponseOutput) ToVideoStreamResponseOutputWithContext 

func (o VideoStreamResponseOutput) ToVideoStreamResponseOutputWithContext(ctx context.Context) VideoStreamResponseOutput

func (VideoStreamResponseOutput) Vp9 

func (o VideoStreamResponseOutput) Vp9() Vp9CodecSettingsResponseOutput

VP9 codec settings.

type Vp9CodecSettings 

type Vp9CodecSettings struct {
	// The video bitrate in bits per second. The minimum value is 1,000. The maximum value is 480,000,000.
	BitrateBps int `pulumi:"bitrateBps"`
	// Target CRF level. Must be between 10 and 36, where 10 is the highest quality and 36 is the most efficient compression. The default is 21. **Note:** This field is not supported.
	CrfLevel *int `pulumi:"crfLevel"`
	// The target video frame rate in frames per second (FPS). Must be less than or equal to 120. Will default to the input frame rate if larger than the input frame rate. The API will generate an output FPS that is divisible by the input FPS, and smaller or equal to the target FPS. See [Calculating frame rate](https://cloud.google.com/transcoder/docs/concepts/frame-rate) for more information.
	FrameRate float64 `pulumi:"frameRate"`
	// Select the GOP size based on the specified duration. The default is `3s`. Note that `gopDuration` must be less than or equal to [`segmentDuration`](#SegmentSettings), and [`segmentDuration`](#SegmentSettings) must be divisible by `gopDuration`.
	GopDuration *string `pulumi:"gopDuration"`
	// Select the GOP size based on the specified frame count. Must be greater than zero.
	GopFrameCount *int `pulumi:"gopFrameCount"`
	// The height of the video in pixels. Must be an even integer. When not specified, the height is adjusted to match the specified width and input aspect ratio. If both are omitted, the input height is used. For portrait videos that contain horizontal ASR and rotation metadata, provide the height, in pixels, per the horizontal ASR. The API calculates the width per the horizontal ASR. The API detects any rotation metadata and swaps the requested height and width for the output.
	HeightPixels *int `pulumi:"heightPixels"`
	// Pixel format to use. The default is `yuv420p`. Supported pixel formats: - `yuv420p` pixel format - `yuv422p` pixel format - `yuv444p` pixel format - `yuv420p10` 10-bit HDR pixel format - `yuv422p10` 10-bit HDR pixel format - `yuv444p10` 10-bit HDR pixel format - `yuv420p12` 12-bit HDR pixel format - `yuv422p12` 12-bit HDR pixel format - `yuv444p12` 12-bit HDR pixel format
	PixelFormat *string `pulumi:"pixelFormat"`
	// Enforces the specified codec profile. The following profiles are supported: * `profile0` (default) * `profile1` * `profile2` * `profile3` The available options are [WebM-compatible](https://www.webmproject.org/vp9/profiles/). Note that certain values for this field may cause the transcoder to override other fields you set in the `Vp9CodecSettings` message.
	Profile *string `pulumi:"profile"`
	// Specify the mode. The default is `vbr`. Supported rate control modes: - `vbr` - variable bitrate
	RateControlMode *string `pulumi:"rateControlMode"`
	// The width of the video in pixels. Must be an even integer. When not specified, the width is adjusted to match the specified height and input aspect ratio. If both are omitted, the input width is used. For portrait videos that contain horizontal ASR and rotation metadata, provide the width, in pixels, per the horizontal ASR. The API calculates the height per the horizontal ASR. The API detects any rotation metadata and swaps the requested height and width for the output.
	WidthPixels *int `pulumi:"widthPixels"`
}

VP9 codec settings.

type Vp9CodecSettingsArgs 

type Vp9CodecSettingsArgs struct {
	// The video bitrate in bits per second. The minimum value is 1,000. The maximum value is 480,000,000.
	BitrateBps pulumi.IntInput `pulumi:"bitrateBps"`
	// Target CRF level. Must be between 10 and 36, where 10 is the highest quality and 36 is the most efficient compression. The default is 21. **Note:** This field is not supported.
	CrfLevel pulumi.IntPtrInput `pulumi:"crfLevel"`
	// The target video frame rate in frames per second (FPS). Must be less than or equal to 120. Will default to the input frame rate if larger than the input frame rate. The API will generate an output FPS that is divisible by the input FPS, and smaller or equal to the target FPS. See [Calculating frame rate](https://cloud.google.com/transcoder/docs/concepts/frame-rate) for more information.
	FrameRate pulumi.Float64Input `pulumi:"frameRate"`
	// Select the GOP size based on the specified duration. The default is `3s`. Note that `gopDuration` must be less than or equal to [`segmentDuration`](#SegmentSettings), and [`segmentDuration`](#SegmentSettings) must be divisible by `gopDuration`.
	GopDuration pulumi.StringPtrInput `pulumi:"gopDuration"`
	// Select the GOP size based on the specified frame count. Must be greater than zero.
	GopFrameCount pulumi.IntPtrInput `pulumi:"gopFrameCount"`
	// The height of the video in pixels. Must be an even integer. When not specified, the height is adjusted to match the specified width and input aspect ratio. If both are omitted, the input height is used. For portrait videos that contain horizontal ASR and rotation metadata, provide the height, in pixels, per the horizontal ASR. The API calculates the width per the horizontal ASR. The API detects any rotation metadata and swaps the requested height and width for the output.
	HeightPixels pulumi.IntPtrInput `pulumi:"heightPixels"`
	// Pixel format to use. The default is `yuv420p`. Supported pixel formats: - `yuv420p` pixel format - `yuv422p` pixel format - `yuv444p` pixel format - `yuv420p10` 10-bit HDR pixel format - `yuv422p10` 10-bit HDR pixel format - `yuv444p10` 10-bit HDR pixel format - `yuv420p12` 12-bit HDR pixel format - `yuv422p12` 12-bit HDR pixel format - `yuv444p12` 12-bit HDR pixel format
	PixelFormat pulumi.StringPtrInput `pulumi:"pixelFormat"`
	// Enforces the specified codec profile. The following profiles are supported: * `profile0` (default) * `profile1` * `profile2` * `profile3` The available options are [WebM-compatible](https://www.webmproject.org/vp9/profiles/). Note that certain values for this field may cause the transcoder to override other fields you set in the `Vp9CodecSettings` message.
	Profile pulumi.StringPtrInput `pulumi:"profile"`
	// Specify the mode. The default is `vbr`. Supported rate control modes: - `vbr` - variable bitrate
	RateControlMode pulumi.StringPtrInput `pulumi:"rateControlMode"`
	// The width of the video in pixels. Must be an even integer. When not specified, the width is adjusted to match the specified height and input aspect ratio. If both are omitted, the input width is used. For portrait videos that contain horizontal ASR and rotation metadata, provide the width, in pixels, per the horizontal ASR. The API calculates the height per the horizontal ASR. The API detects any rotation metadata and swaps the requested height and width for the output.
	WidthPixels pulumi.IntPtrInput `pulumi:"widthPixels"`
}

VP9 codec settings.

func (Vp9CodecSettingsArgs) ElementType 

func (Vp9CodecSettingsArgs) ElementType() reflect.Type

func (Vp9CodecSettingsArgs) ToVp9CodecSettingsOutput 

func (i Vp9CodecSettingsArgs) ToVp9CodecSettingsOutput() Vp9CodecSettingsOutput

func (Vp9CodecSettingsArgs) ToVp9CodecSettingsOutputWithContext 

func (i Vp9CodecSettingsArgs) ToVp9CodecSettingsOutputWithContext(ctx context.Context) Vp9CodecSettingsOutput

func (Vp9CodecSettingsArgs) ToVp9CodecSettingsPtrOutput 

func (i Vp9CodecSettingsArgs) ToVp9CodecSettingsPtrOutput() Vp9CodecSettingsPtrOutput

func (Vp9CodecSettingsArgs) ToVp9CodecSettingsPtrOutputWithContext 

func (i Vp9CodecSettingsArgs) ToVp9CodecSettingsPtrOutputWithContext(ctx context.Context) Vp9CodecSettingsPtrOutput

type Vp9CodecSettingsInput 

type Vp9CodecSettingsInput interface {
	pulumi.Input

	ToVp9CodecSettingsOutput() Vp9CodecSettingsOutput
	ToVp9CodecSettingsOutputWithContext(context.Context) Vp9CodecSettingsOutput
}

Vp9CodecSettingsInput is an input type that accepts Vp9CodecSettingsArgs and Vp9CodecSettingsOutput values. You can construct a concrete instance of `Vp9CodecSettingsInput` via: 

Vp9CodecSettingsArgs{...}

type Vp9CodecSettingsOutput 

type Vp9CodecSettingsOutput struct{ *pulumi.OutputState }

VP9 codec settings.

func (Vp9CodecSettingsOutput) BitrateBps 

func (o Vp9CodecSettingsOutput) BitrateBps() pulumi.IntOutput

The video bitrate in bits per second. The minimum value is 1,000. The maximum value is 480,000,000.

func (Vp9CodecSettingsOutput) CrfLevel 

func (o Vp9CodecSettingsOutput) CrfLevel() pulumi.IntPtrOutput

Target CRF level. Must be between 10 and 36, where 10 is the highest quality and 36 is the most efficient compression. The default is 21. **Note:** This field is not supported.

func (Vp9CodecSettingsOutput) ElementType 

func (Vp9CodecSettingsOutput) ElementType() reflect.Type

func (Vp9CodecSettingsOutput) FrameRate 

func (o Vp9CodecSettingsOutput) FrameRate() pulumi.Float64Output

The target video frame rate in frames per second (FPS). Must be less than or equal to 120. Will default to the input frame rate if larger than the input frame rate. The API will generate an output FPS that is divisible by the input FPS, and smaller or equal to the target FPS. See [Calculating frame rate](https://cloud.google.com/transcoder/docs/concepts/frame-rate) for more information.

func (Vp9CodecSettingsOutput) GopDuration 

func (o Vp9CodecSettingsOutput) GopDuration() pulumi.StringPtrOutput

Select the GOP size based on the specified duration. The default is `3s`. Note that `gopDuration` must be less than or equal to [`segmentDuration`](#SegmentSettings), and [`segmentDuration`](#SegmentSettings) must be divisible by `gopDuration`.

func (Vp9CodecSettingsOutput) GopFrameCount 

func (o Vp9CodecSettingsOutput) GopFrameCount() pulumi.IntPtrOutput

Select the GOP size based on the specified frame count. Must be greater than zero.

func (Vp9CodecSettingsOutput) HeightPixels 

func (o Vp9CodecSettingsOutput) HeightPixels() pulumi.IntPtrOutput

The height of the video in pixels. Must be an even integer. When not specified, the height is adjusted to match the specified width and input aspect ratio. If both are omitted, the input height is used. For portrait videos that contain horizontal ASR and rotation metadata, provide the height, in pixels, per the horizontal ASR. The API calculates the width per the horizontal ASR. The API detects any rotation metadata and swaps the requested height and width for the output.

func (Vp9CodecSettingsOutput) PixelFormat 

func (o Vp9CodecSettingsOutput) PixelFormat() pulumi.StringPtrOutput

Pixel format to use. The default is `yuv420p`. Supported pixel formats: - `yuv420p` pixel format - `yuv422p` pixel format - `yuv444p` pixel format - `yuv420p10` 10-bit HDR pixel format - `yuv422p10` 10-bit HDR pixel format - `yuv444p10` 10-bit HDR pixel format - `yuv420p12` 12-bit HDR pixel format - `yuv422p12` 12-bit HDR pixel format - `yuv444p12` 12-bit HDR pixel format

func (Vp9CodecSettingsOutput) Profile 

func (o Vp9CodecSettingsOutput) Profile() pulumi.StringPtrOutput

Enforces the specified codec profile. The following profiles are supported: * `profile0` (default) * `profile1` * `profile2` * `profile3` The available options are [WebM-compatible](https://www.webmproject.org/vp9/profiles/). Note that certain values for this field may cause the transcoder to override other fields you set in the `Vp9CodecSettings` message.

func (Vp9CodecSettingsOutput) RateControlMode 

func (o Vp9CodecSettingsOutput) RateControlMode() pulumi.StringPtrOutput

Specify the mode. The default is `vbr`. Supported rate control modes: - `vbr` - variable bitrate

func (Vp9CodecSettingsOutput) ToVp9CodecSettingsOutput 

func (o Vp9CodecSettingsOutput) ToVp9CodecSettingsOutput() Vp9CodecSettingsOutput

func (Vp9CodecSettingsOutput) ToVp9CodecSettingsOutputWithContext 

func (o Vp9CodecSettingsOutput) ToVp9CodecSettingsOutputWithContext(ctx context.Context) Vp9CodecSettingsOutput

func (Vp9CodecSettingsOutput) ToVp9CodecSettingsPtrOutput 

func (o Vp9CodecSettingsOutput) ToVp9CodecSettingsPtrOutput() Vp9CodecSettingsPtrOutput

func (Vp9CodecSettingsOutput) ToVp9CodecSettingsPtrOutputWithContext 

func (o Vp9CodecSettingsOutput) ToVp9CodecSettingsPtrOutputWithContext(ctx context.Context) Vp9CodecSettingsPtrOutput

func (Vp9CodecSettingsOutput) WidthPixels 

func (o Vp9CodecSettingsOutput) WidthPixels() pulumi.IntPtrOutput

The width of the video in pixels. Must be an even integer. When not specified, the width is adjusted to match the specified height and input aspect ratio. If both are omitted, the input width is used. For portrait videos that contain horizontal ASR and rotation metadata, provide the width, in pixels, per the horizontal ASR. The API calculates the height per the horizontal ASR. The API detects any rotation metadata and swaps the requested height and width for the output.

type Vp9CodecSettingsPtrInput 

type Vp9CodecSettingsPtrInput interface {
	pulumi.Input

	ToVp9CodecSettingsPtrOutput() Vp9CodecSettingsPtrOutput
	ToVp9CodecSettingsPtrOutputWithContext(context.Context) Vp9CodecSettingsPtrOutput
}

Vp9CodecSettingsPtrInput is an input type that accepts Vp9CodecSettingsArgs, Vp9CodecSettingsPtr and Vp9CodecSettingsPtrOutput values. You can construct a concrete instance of `Vp9CodecSettingsPtrInput` via: 

        Vp9CodecSettingsArgs{...}

or:

        nil

func Vp9CodecSettingsPtr 

func Vp9CodecSettingsPtr(v *Vp9CodecSettingsArgs) Vp9CodecSettingsPtrInput

type Vp9CodecSettingsPtrOutput 

type Vp9CodecSettingsPtrOutput struct{ *pulumi.OutputState }

func (Vp9CodecSettingsPtrOutput) BitrateBps 

func (o Vp9CodecSettingsPtrOutput) BitrateBps() pulumi.IntPtrOutput

The video bitrate in bits per second. The minimum value is 1,000. The maximum value is 480,000,000.

func (Vp9CodecSettingsPtrOutput) CrfLevel 

func (o Vp9CodecSettingsPtrOutput) CrfLevel() pulumi.IntPtrOutput

Target CRF level. Must be between 10 and 36, where 10 is the highest quality and 36 is the most efficient compression. The default is 21. **Note:** This field is not supported.

func (Vp9CodecSettingsPtrOutput) Elem 

func (o Vp9CodecSettingsPtrOutput) Elem() Vp9CodecSettingsOutput

func (Vp9CodecSettingsPtrOutput) ElementType 

func (Vp9CodecSettingsPtrOutput) ElementType() reflect.Type

func (Vp9CodecSettingsPtrOutput) FrameRate 

func (o Vp9CodecSettingsPtrOutput) FrameRate() pulumi.Float64PtrOutput

The target video frame rate in frames per second (FPS). Must be less than or equal to 120. Will default to the input frame rate if larger than the input frame rate. The API will generate an output FPS that is divisible by the input FPS, and smaller or equal to the target FPS. See [Calculating frame rate](https://cloud.google.com/transcoder/docs/concepts/frame-rate) for more information.

func (Vp9CodecSettingsPtrOutput) GopDuration 

func (o Vp9CodecSettingsPtrOutput) GopDuration() pulumi.StringPtrOutput

Select the GOP size based on the specified duration. The default is `3s`. Note that `gopDuration` must be less than or equal to [`segmentDuration`](#SegmentSettings), and [`segmentDuration`](#SegmentSettings) must be divisible by `gopDuration`.

func (Vp9CodecSettingsPtrOutput) GopFrameCount 

func (o Vp9CodecSettingsPtrOutput) GopFrameCount() pulumi.IntPtrOutput

Select the GOP size based on the specified frame count. Must be greater than zero.

func (Vp9CodecSettingsPtrOutput) HeightPixels 

func (o Vp9CodecSettingsPtrOutput) HeightPixels() pulumi.IntPtrOutput

The height of the video in pixels. Must be an even integer. When not specified, the height is adjusted to match the specified width and input aspect ratio. If both are omitted, the input height is used. For portrait videos that contain horizontal ASR and rotation metadata, provide the height, in pixels, per the horizontal ASR. The API calculates the width per the horizontal ASR. The API detects any rotation metadata and swaps the requested height and width for the output.

func (Vp9CodecSettingsPtrOutput) PixelFormat 

func (o Vp9CodecSettingsPtrOutput) PixelFormat() pulumi.StringPtrOutput

Pixel format to use. The default is `yuv420p`. Supported pixel formats: - `yuv420p` pixel format - `yuv422p` pixel format - `yuv444p` pixel format - `yuv420p10` 10-bit HDR pixel format - `yuv422p10` 10-bit HDR pixel format - `yuv444p10` 10-bit HDR pixel format - `yuv420p12` 12-bit HDR pixel format - `yuv422p12` 12-bit HDR pixel format - `yuv444p12` 12-bit HDR pixel format

func (Vp9CodecSettingsPtrOutput) Profile 

func (o Vp9CodecSettingsPtrOutput) Profile() pulumi.StringPtrOutput

Enforces the specified codec profile. The following profiles are supported: * `profile0` (default) * `profile1` * `profile2` * `profile3` The available options are [WebM-compatible](https://www.webmproject.org/vp9/profiles/). Note that certain values for this field may cause the transcoder to override other fields you set in the `Vp9CodecSettings` message.

func (Vp9CodecSettingsPtrOutput) RateControlMode 

func (o Vp9CodecSettingsPtrOutput) RateControlMode() pulumi.StringPtrOutput

Specify the mode. The default is `vbr`. Supported rate control modes: - `vbr` - variable bitrate

func (Vp9CodecSettingsPtrOutput) ToVp9CodecSettingsPtrOutput 

func (o Vp9CodecSettingsPtrOutput) ToVp9CodecSettingsPtrOutput() Vp9CodecSettingsPtrOutput

func (Vp9CodecSettingsPtrOutput) ToVp9CodecSettingsPtrOutputWithContext 

func (o Vp9CodecSettingsPtrOutput) ToVp9CodecSettingsPtrOutputWithContext(ctx context.Context) Vp9CodecSettingsPtrOutput

func (Vp9CodecSettingsPtrOutput) WidthPixels 

func (o Vp9CodecSettingsPtrOutput) WidthPixels() pulumi.IntPtrOutput

The width of the video in pixels. Must be an even integer. When not specified, the width is adjusted to match the specified height and input aspect ratio. If both are omitted, the input width is used. For portrait videos that contain horizontal ASR and rotation metadata, provide the width, in pixels, per the horizontal ASR. The API calculates the height per the horizontal ASR. The API detects any rotation metadata and swaps the requested height and width for the output.

type Vp9CodecSettingsResponse 

type Vp9CodecSettingsResponse struct {
	// The video bitrate in bits per second. The minimum value is 1,000. The maximum value is 480,000,000.
	BitrateBps int `pulumi:"bitrateBps"`
	// Target CRF level. Must be between 10 and 36, where 10 is the highest quality and 36 is the most efficient compression. The default is 21. **Note:** This field is not supported.
	CrfLevel int `pulumi:"crfLevel"`
	// The target video frame rate in frames per second (FPS). Must be less than or equal to 120. Will default to the input frame rate if larger than the input frame rate. The API will generate an output FPS that is divisible by the input FPS, and smaller or equal to the target FPS. See [Calculating frame rate](https://cloud.google.com/transcoder/docs/concepts/frame-rate) for more information.
	FrameRate float64 `pulumi:"frameRate"`
	// Select the GOP size based on the specified duration. The default is `3s`. Note that `gopDuration` must be less than or equal to [`segmentDuration`](#SegmentSettings), and [`segmentDuration`](#SegmentSettings) must be divisible by `gopDuration`.
	GopDuration string `pulumi:"gopDuration"`
	// Select the GOP size based on the specified frame count. Must be greater than zero.
	GopFrameCount int `pulumi:"gopFrameCount"`
	// The height of the video in pixels. Must be an even integer. When not specified, the height is adjusted to match the specified width and input aspect ratio. If both are omitted, the input height is used. For portrait videos that contain horizontal ASR and rotation metadata, provide the height, in pixels, per the horizontal ASR. The API calculates the width per the horizontal ASR. The API detects any rotation metadata and swaps the requested height and width for the output.
	HeightPixels int `pulumi:"heightPixels"`
	// Pixel format to use. The default is `yuv420p`. Supported pixel formats: - `yuv420p` pixel format - `yuv422p` pixel format - `yuv444p` pixel format - `yuv420p10` 10-bit HDR pixel format - `yuv422p10` 10-bit HDR pixel format - `yuv444p10` 10-bit HDR pixel format - `yuv420p12` 12-bit HDR pixel format - `yuv422p12` 12-bit HDR pixel format - `yuv444p12` 12-bit HDR pixel format
	PixelFormat string `pulumi:"pixelFormat"`
	// Enforces the specified codec profile. The following profiles are supported: * `profile0` (default) * `profile1` * `profile2` * `profile3` The available options are [WebM-compatible](https://www.webmproject.org/vp9/profiles/). Note that certain values for this field may cause the transcoder to override other fields you set in the `Vp9CodecSettings` message.
	Profile string `pulumi:"profile"`
	// Specify the mode. The default is `vbr`. Supported rate control modes: - `vbr` - variable bitrate
	RateControlMode string `pulumi:"rateControlMode"`
	// The width of the video in pixels. Must be an even integer. When not specified, the width is adjusted to match the specified height and input aspect ratio. If both are omitted, the input width is used. For portrait videos that contain horizontal ASR and rotation metadata, provide the width, in pixels, per the horizontal ASR. The API calculates the height per the horizontal ASR. The API detects any rotation metadata and swaps the requested height and width for the output.
	WidthPixels int `pulumi:"widthPixels"`
}

VP9 codec settings.

type Vp9CodecSettingsResponseOutput 

type Vp9CodecSettingsResponseOutput struct{ *pulumi.OutputState }

VP9 codec settings.

func (Vp9CodecSettingsResponseOutput) BitrateBps 

func (o Vp9CodecSettingsResponseOutput) BitrateBps() pulumi.IntOutput

The video bitrate in bits per second. The minimum value is 1,000. The maximum value is 480,000,000.

func (Vp9CodecSettingsResponseOutput) CrfLevel 

func (o Vp9CodecSettingsResponseOutput) CrfLevel() pulumi.IntOutput

Target CRF level. Must be between 10 and 36, where 10 is the highest quality and 36 is the most efficient compression. The default is 21. **Note:** This field is not supported.

func (Vp9CodecSettingsResponseOutput) ElementType 

func (Vp9CodecSettingsResponseOutput) ElementType() reflect.Type

func (Vp9CodecSettingsResponseOutput) FrameRate 

func (o Vp9CodecSettingsResponseOutput) FrameRate() pulumi.Float64Output

The target video frame rate in frames per second (FPS). Must be less than or equal to 120. Will default to the input frame rate if larger than the input frame rate. The API will generate an output FPS that is divisible by the input FPS, and smaller or equal to the target FPS. See [Calculating frame rate](https://cloud.google.com/transcoder/docs/concepts/frame-rate) for more information.

func (Vp9CodecSettingsResponseOutput) GopDuration 

func (o Vp9CodecSettingsResponseOutput) GopDuration() pulumi.StringOutput

Select the GOP size based on the specified duration. The default is `3s`. Note that `gopDuration` must be less than or equal to [`segmentDuration`](#SegmentSettings), and [`segmentDuration`](#SegmentSettings) must be divisible by `gopDuration`.

func (Vp9CodecSettingsResponseOutput) GopFrameCount 

func (o Vp9CodecSettingsResponseOutput) GopFrameCount() pulumi.IntOutput

Select the GOP size based on the specified frame count. Must be greater than zero.

func (Vp9CodecSettingsResponseOutput) HeightPixels 

func (o Vp9CodecSettingsResponseOutput) HeightPixels() pulumi.IntOutput

The height of the video in pixels. Must be an even integer. When not specified, the height is adjusted to match the specified width and input aspect ratio. If both are omitted, the input height is used. For portrait videos that contain horizontal ASR and rotation metadata, provide the height, in pixels, per the horizontal ASR. The API calculates the width per the horizontal ASR. The API detects any rotation metadata and swaps the requested height and width for the output.

func (Vp9CodecSettingsResponseOutput) PixelFormat 

func (o Vp9CodecSettingsResponseOutput) PixelFormat() pulumi.StringOutput

Pixel format to use. The default is `yuv420p`. Supported pixel formats: - `yuv420p` pixel format - `yuv422p` pixel format - `yuv444p` pixel format - `yuv420p10` 10-bit HDR pixel format - `yuv422p10` 10-bit HDR pixel format - `yuv444p10` 10-bit HDR pixel format - `yuv420p12` 12-bit HDR pixel format - `yuv422p12` 12-bit HDR pixel format - `yuv444p12` 12-bit HDR pixel format

func (Vp9CodecSettingsResponseOutput) Profile 

func (o Vp9CodecSettingsResponseOutput) Profile() pulumi.StringOutput

Enforces the specified codec profile. The following profiles are supported: * `profile0` (default) * `profile1` * `profile2` * `profile3` The available options are [WebM-compatible](https://www.webmproject.org/vp9/profiles/). Note that certain values for this field may cause the transcoder to override other fields you set in the `Vp9CodecSettings` message.

func (Vp9CodecSettingsResponseOutput) RateControlMode 

func (o Vp9CodecSettingsResponseOutput) RateControlMode() pulumi.StringOutput

Specify the mode. The default is `vbr`. Supported rate control modes: - `vbr` - variable bitrate

func (Vp9CodecSettingsResponseOutput) ToVp9CodecSettingsResponseOutput 

func (o Vp9CodecSettingsResponseOutput) ToVp9CodecSettingsResponseOutput() Vp9CodecSettingsResponseOutput

func (Vp9CodecSettingsResponseOutput) ToVp9CodecSettingsResponseOutputWithContext 

func (o Vp9CodecSettingsResponseOutput) ToVp9CodecSettingsResponseOutputWithContext(ctx context.Context) Vp9CodecSettingsResponseOutput

func (Vp9CodecSettingsResponseOutput) WidthPixels 

func (o Vp9CodecSettingsResponseOutput) WidthPixels() pulumi.IntOutput

The width of the video in pixels. Must be an even integer. When not specified, the width is adjusted to match the specified height and input aspect ratio. If both are omitted, the input width is used. For portrait videos that contain horizontal ASR and rotation metadata, provide the width, in pixels, per the horizontal ASR. The API calculates the height per the horizontal ASR. The API detects any rotation metadata and swaps the requested height and width for the output.

type Widevine added in v0.32.0 

type Widevine struct {
}

Widevine configuration.

type WidevineArgs added in v0.32.0 

type WidevineArgs struct {
}

Widevine configuration.

func (WidevineArgs) ElementType added in v0.32.0 

func (WidevineArgs) ElementType() reflect.Type

func (WidevineArgs) ToWidevineOutput added in v0.32.0 

func (i WidevineArgs) ToWidevineOutput() WidevineOutput

func (WidevineArgs) ToWidevineOutputWithContext added in v0.32.0 

func (i WidevineArgs) ToWidevineOutputWithContext(ctx context.Context) WidevineOutput

func (WidevineArgs) ToWidevinePtrOutput added in v0.32.0 

func (i WidevineArgs) ToWidevinePtrOutput() WidevinePtrOutput

func (WidevineArgs) ToWidevinePtrOutputWithContext added in v0.32.0 

func (i WidevineArgs) ToWidevinePtrOutputWithContext(ctx context.Context) WidevinePtrOutput

type WidevineInput added in v0.32.0 

type WidevineInput interface {
	pulumi.Input

	ToWidevineOutput() WidevineOutput
	ToWidevineOutputWithContext(context.Context) WidevineOutput
}

WidevineInput is an input type that accepts WidevineArgs and WidevineOutput values. You can construct a concrete instance of `WidevineInput` via: 

WidevineArgs{...}

type WidevineOutput added in v0.32.0 

type WidevineOutput struct{ *pulumi.OutputState }

Widevine configuration.

func (WidevineOutput) ElementType added in v0.32.0 

func (WidevineOutput) ElementType() reflect.Type

func (WidevineOutput) ToWidevineOutput added in v0.32.0 

func (o WidevineOutput) ToWidevineOutput() WidevineOutput

func (WidevineOutput) ToWidevineOutputWithContext added in v0.32.0 

func (o WidevineOutput) ToWidevineOutputWithContext(ctx context.Context) WidevineOutput

func (WidevineOutput) ToWidevinePtrOutput added in v0.32.0 

func (o WidevineOutput) ToWidevinePtrOutput() WidevinePtrOutput

func (WidevineOutput) ToWidevinePtrOutputWithContext added in v0.32.0 

func (o WidevineOutput) ToWidevinePtrOutputWithContext(ctx context.Context) WidevinePtrOutput

type WidevinePtrInput added in v0.32.0 

type WidevinePtrInput interface {
	pulumi.Input

	ToWidevinePtrOutput() WidevinePtrOutput
	ToWidevinePtrOutputWithContext(context.Context) WidevinePtrOutput
}

WidevinePtrInput is an input type that accepts WidevineArgs, WidevinePtr and WidevinePtrOutput values. You can construct a concrete instance of `WidevinePtrInput` via: 

        WidevineArgs{...}

or:

        nil

func WidevinePtr added in v0.32.0 

func WidevinePtr(v *WidevineArgs) WidevinePtrInput

type WidevinePtrOutput added in v0.32.0 

type WidevinePtrOutput struct{ *pulumi.OutputState }

func (WidevinePtrOutput) Elem added in v0.32.0 

func (o WidevinePtrOutput) Elem() WidevineOutput

func (WidevinePtrOutput) ElementType added in v0.32.0 

func (WidevinePtrOutput) ElementType() reflect.Type

func (WidevinePtrOutput) ToWidevinePtrOutput added in v0.32.0 

func (o WidevinePtrOutput) ToWidevinePtrOutput() WidevinePtrOutput

func (WidevinePtrOutput) ToWidevinePtrOutputWithContext added in v0.32.0 

func (o WidevinePtrOutput) ToWidevinePtrOutputWithContext(ctx context.Context) WidevinePtrOutput

type WidevineResponse added in v0.32.0 

type WidevineResponse struct {
}

Widevine configuration.

type WidevineResponseOutput added in v0.32.0 

type WidevineResponseOutput struct{ *pulumi.OutputState }

Widevine configuration.

func (WidevineResponseOutput) ElementType added in v0.32.0 

func (WidevineResponseOutput) ElementType() reflect.Type

func (WidevineResponseOutput) ToWidevineResponseOutput added in v0.32.0 

func (o WidevineResponseOutput) ToWidevineResponseOutput() WidevineResponseOutput

func (WidevineResponseOutput) ToWidevineResponseOutputWithContext added in v0.32.0 

func (o WidevineResponseOutput) ToWidevineResponseOutputWithContext(ctx context.Context) WidevineResponseOutput

type YadifConfig added in v0.24.0 

type YadifConfig struct {
	// Deinterlace all frames rather than just the frames identified as interlaced. The default is `false`.
	DeinterlaceAllFrames *bool `pulumi:"deinterlaceAllFrames"`
	// Disable spacial interlacing. The default is `false`.
	DisableSpatialInterlacing *bool `pulumi:"disableSpatialInterlacing"`
	// Specifies the deinterlacing mode to adopt. The default is `send_frame`. Supported values: - `send_frame`: Output one frame for each frame - `send_field`: Output one frame for each field
	Mode *string `pulumi:"mode"`
	// The picture field parity assumed for the input interlaced video. The default is `auto`. Supported values: - `tff`: Assume the top field is first - `bff`: Assume the bottom field is first - `auto`: Enable automatic detection of field parity
	Parity *string `pulumi:"parity"`
}

Yet Another Deinterlacing Filter Configuration.

type YadifConfigArgs added in v0.24.0 

type YadifConfigArgs struct {
	// Deinterlace all frames rather than just the frames identified as interlaced. The default is `false`.
	DeinterlaceAllFrames pulumi.BoolPtrInput `pulumi:"deinterlaceAllFrames"`
	// Disable spacial interlacing. The default is `false`.
	DisableSpatialInterlacing pulumi.BoolPtrInput `pulumi:"disableSpatialInterlacing"`
	// Specifies the deinterlacing mode to adopt. The default is `send_frame`. Supported values: - `send_frame`: Output one frame for each frame - `send_field`: Output one frame for each field
	Mode pulumi.StringPtrInput `pulumi:"mode"`
	// The picture field parity assumed for the input interlaced video. The default is `auto`. Supported values: - `tff`: Assume the top field is first - `bff`: Assume the bottom field is first - `auto`: Enable automatic detection of field parity
	Parity pulumi.StringPtrInput `pulumi:"parity"`
}

Yet Another Deinterlacing Filter Configuration.

func (YadifConfigArgs) ElementType added in v0.24.0 

func (YadifConfigArgs) ElementType() reflect.Type

func (YadifConfigArgs) ToYadifConfigOutput added in v0.24.0 

func (i YadifConfigArgs) ToYadifConfigOutput() YadifConfigOutput

func (YadifConfigArgs) ToYadifConfigOutputWithContext added in v0.24.0 

func (i YadifConfigArgs) ToYadifConfigOutputWithContext(ctx context.Context) YadifConfigOutput

func (YadifConfigArgs) ToYadifConfigPtrOutput added in v0.24.0 

func (i YadifConfigArgs) ToYadifConfigPtrOutput() YadifConfigPtrOutput

func (YadifConfigArgs) ToYadifConfigPtrOutputWithContext added in v0.24.0 

func (i YadifConfigArgs) ToYadifConfigPtrOutputWithContext(ctx context.Context) YadifConfigPtrOutput

type YadifConfigInput added in v0.24.0 

type YadifConfigInput interface {
	pulumi.Input

	ToYadifConfigOutput() YadifConfigOutput
	ToYadifConfigOutputWithContext(context.Context) YadifConfigOutput
}

YadifConfigInput is an input type that accepts YadifConfigArgs and YadifConfigOutput values. You can construct a concrete instance of `YadifConfigInput` via: 

YadifConfigArgs{...}

type YadifConfigOutput added in v0.24.0 

type YadifConfigOutput struct{ *pulumi.OutputState }

Yet Another Deinterlacing Filter Configuration.

func (YadifConfigOutput) DeinterlaceAllFrames added in v0.24.0 

func (o YadifConfigOutput) DeinterlaceAllFrames() pulumi.BoolPtrOutput

Deinterlace all frames rather than just the frames identified as interlaced. The default is `false`.

func (YadifConfigOutput) DisableSpatialInterlacing added in v0.24.0 

func (o YadifConfigOutput) DisableSpatialInterlacing() pulumi.BoolPtrOutput

Disable spacial interlacing. The default is `false`.

func (YadifConfigOutput) ElementType added in v0.24.0 

func (YadifConfigOutput) ElementType() reflect.Type

func (YadifConfigOutput) Mode added in v0.24.0 

func (o YadifConfigOutput) Mode() pulumi.StringPtrOutput

Specifies the deinterlacing mode to adopt. The default is `send_frame`. Supported values: - `send_frame`: Output one frame for each frame - `send_field`: Output one frame for each field

func (YadifConfigOutput) Parity added in v0.24.0 

func (o YadifConfigOutput) Parity() pulumi.StringPtrOutput

The picture field parity assumed for the input interlaced video. The default is `auto`. Supported values: - `tff`: Assume the top field is first - `bff`: Assume the bottom field is first - `auto`: Enable automatic detection of field parity

func (YadifConfigOutput) ToYadifConfigOutput added in v0.24.0 

func (o YadifConfigOutput) ToYadifConfigOutput() YadifConfigOutput

func (YadifConfigOutput) ToYadifConfigOutputWithContext added in v0.24.0 

func (o YadifConfigOutput) ToYadifConfigOutputWithContext(ctx context.Context) YadifConfigOutput

func (YadifConfigOutput) ToYadifConfigPtrOutput added in v0.24.0 

func (o YadifConfigOutput) ToYadifConfigPtrOutput() YadifConfigPtrOutput

func (YadifConfigOutput) ToYadifConfigPtrOutputWithContext added in v0.24.0 

func (o YadifConfigOutput) ToYadifConfigPtrOutputWithContext(ctx context.Context) YadifConfigPtrOutput

type YadifConfigPtrInput added in v0.24.0 

type YadifConfigPtrInput interface {
	pulumi.Input

	ToYadifConfigPtrOutput() YadifConfigPtrOutput
	ToYadifConfigPtrOutputWithContext(context.Context) YadifConfigPtrOutput
}

YadifConfigPtrInput is an input type that accepts YadifConfigArgs, YadifConfigPtr and YadifConfigPtrOutput values. You can construct a concrete instance of `YadifConfigPtrInput` via: 

        YadifConfigArgs{...}

or:

        nil

func YadifConfigPtr added in v0.24.0 

func YadifConfigPtr(v *YadifConfigArgs) YadifConfigPtrInput

type YadifConfigPtrOutput added in v0.24.0 

type YadifConfigPtrOutput struct{ *pulumi.OutputState }

func (YadifConfigPtrOutput) DeinterlaceAllFrames added in v0.24.0 

func (o YadifConfigPtrOutput) DeinterlaceAllFrames() pulumi.BoolPtrOutput

Deinterlace all frames rather than just the frames identified as interlaced. The default is `false`.

func (YadifConfigPtrOutput) DisableSpatialInterlacing added in v0.24.0 

func (o YadifConfigPtrOutput) DisableSpatialInterlacing() pulumi.BoolPtrOutput

Disable spacial interlacing. The default is `false`.

func (YadifConfigPtrOutput) Elem added in v0.24.0 

func (o YadifConfigPtrOutput) Elem() YadifConfigOutput

func (YadifConfigPtrOutput) ElementType added in v0.24.0 

func (YadifConfigPtrOutput) ElementType() reflect.Type

func (YadifConfigPtrOutput) Mode added in v0.24.0 

func (o YadifConfigPtrOutput) Mode() pulumi.StringPtrOutput

Specifies the deinterlacing mode to adopt. The default is `send_frame`. Supported values: - `send_frame`: Output one frame for each frame - `send_field`: Output one frame for each field

func (YadifConfigPtrOutput) Parity added in v0.24.0 

func (o YadifConfigPtrOutput) Parity() pulumi.StringPtrOutput

The picture field parity assumed for the input interlaced video. The default is `auto`. Supported values: - `tff`: Assume the top field is first - `bff`: Assume the bottom field is first - `auto`: Enable automatic detection of field parity

func (YadifConfigPtrOutput) ToYadifConfigPtrOutput added in v0.24.0 

func (o YadifConfigPtrOutput) ToYadifConfigPtrOutput() YadifConfigPtrOutput

func (YadifConfigPtrOutput) ToYadifConfigPtrOutputWithContext added in v0.24.0 

func (o YadifConfigPtrOutput) ToYadifConfigPtrOutputWithContext(ctx context.Context) YadifConfigPtrOutput

type YadifConfigResponse added in v0.24.0 

type YadifConfigResponse struct {
	// Deinterlace all frames rather than just the frames identified as interlaced. The default is `false`.
	DeinterlaceAllFrames bool `pulumi:"deinterlaceAllFrames"`
	// Disable spacial interlacing. The default is `false`.
	DisableSpatialInterlacing bool `pulumi:"disableSpatialInterlacing"`
	// Specifies the deinterlacing mode to adopt. The default is `send_frame`. Supported values: - `send_frame`: Output one frame for each frame - `send_field`: Output one frame for each field
	Mode string `pulumi:"mode"`
	// The picture field parity assumed for the input interlaced video. The default is `auto`. Supported values: - `tff`: Assume the top field is first - `bff`: Assume the bottom field is first - `auto`: Enable automatic detection of field parity
	Parity string `pulumi:"parity"`
}

Yet Another Deinterlacing Filter Configuration.

type YadifConfigResponseOutput added in v0.24.0 

type YadifConfigResponseOutput struct{ *pulumi.OutputState }

Yet Another Deinterlacing Filter Configuration.

func (YadifConfigResponseOutput) DeinterlaceAllFrames added in v0.24.0 

func (o YadifConfigResponseOutput) DeinterlaceAllFrames() pulumi.BoolOutput

Deinterlace all frames rather than just the frames identified as interlaced. The default is `false`.

func (YadifConfigResponseOutput) DisableSpatialInterlacing added in v0.24.0 

func (o YadifConfigResponseOutput) DisableSpatialInterlacing() pulumi.BoolOutput

Disable spacial interlacing. The default is `false`.

func (YadifConfigResponseOutput) ElementType added in v0.24.0 

func (YadifConfigResponseOutput) ElementType() reflect.Type

func (YadifConfigResponseOutput) Mode added in v0.24.0 

func (o YadifConfigResponseOutput) Mode() pulumi.StringOutput

Specifies the deinterlacing mode to adopt. The default is `send_frame`. Supported values: - `send_frame`: Output one frame for each frame - `send_field`: Output one frame for each field

func (YadifConfigResponseOutput) Parity added in v0.24.0 

func (o YadifConfigResponseOutput) Parity() pulumi.StringOutput

The picture field parity assumed for the input interlaced video. The default is `auto`. Supported values: - `tff`: Assume the top field is first - `bff`: Assume the bottom field is first - `auto`: Enable automatic detection of field parity

func (YadifConfigResponseOutput) ToYadifConfigResponseOutput added in v0.24.0 

func (o YadifConfigResponseOutput) ToYadifConfigResponseOutput() YadifConfigResponseOutput

func (YadifConfigResponseOutput) ToYadifConfigResponseOutputWithContext added in v0.24.0 

func (o YadifConfigResponseOutput) ToYadifConfigResponseOutputWithContext(ctx context.Context) YadifConfigResponseOutput

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.