vpcaccess

package
v8.0.0-rc.0 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Sep 13, 2024 License: Apache-2.0 Imports: 6 Imported by: 1

Documentation

Index

Constants

This section is empty.

Variables

This section is empty.

Functions

This section is empty.

Types

type Connector 

type Connector struct {
	pulumi.CustomResourceState

	// List of projects using the connector.
	ConnectedProjects pulumi.StringArrayOutput `pulumi:"connectedProjects"`
	// The range of internal addresses that follows RFC 4632 notation. Example: `10.132.0.0/28`.
	IpCidrRange pulumi.StringPtrOutput `pulumi:"ipCidrRange"`
	// Machine type of VM Instance underlying connector. Default is e2-micro
	MachineType pulumi.StringPtrOutput `pulumi:"machineType"`
	// Maximum value of instances in autoscaling group underlying the connector. Value must be between 3 and 10, inclusive. Must be
	// higher than the value specified by min_instances.
	MaxInstances pulumi.IntOutput `pulumi:"maxInstances"`
	// Maximum throughput of the connector in Mbps, must be greater than `minThroughput`. Default is 300. Refers to the expected throughput
	// when using an e2-micro machine type. Value must be a multiple of 100 from 300 through 1000. Must be higher than the value specified by
	// min_throughput. If both maxThroughput and maxInstances are provided, maxInstances takes precedence over max_throughput. The use of
	// maxThroughput is discouraged in favor of max_instances.
	MaxThroughput pulumi.IntOutput `pulumi:"maxThroughput"`
	// Minimum value of instances in autoscaling group underlying the connector. Value must be between 2 and 9, inclusive. Must be
	// lower than the value specified by max_instances.
	MinInstances pulumi.IntOutput `pulumi:"minInstances"`
	// Minimum throughput of the connector in Mbps. Default and min is 200. Refers to the expected throughput when using an e2-micro machine type.
	// Value must be a multiple of 100 from 200 through 900. Must be lower than the value specified by max_throughput. If both minThroughput and
	// minInstances are provided, minInstances takes precedence over min_throughput. The use of minThroughput is discouraged in favor of min_instances.
	MinThroughput pulumi.IntOutput `pulumi:"minThroughput"`
	// The name of the resource (Max 25 characters).
	//
	// ***
	Name pulumi.StringOutput `pulumi:"name"`
	// Name or selfLink of the VPC network. Required if `ipCidrRange` is set.
	Network pulumi.StringOutput `pulumi:"network"`
	// The ID of the project in which the resource belongs.
	// If it is not provided, the provider project is used.
	Project pulumi.StringOutput `pulumi:"project"`
	// Region where the VPC Access connector resides. If it is not provided, the provider region is used.
	Region pulumi.StringOutput `pulumi:"region"`
	// The fully qualified name of this VPC connector
	SelfLink pulumi.StringOutput `pulumi:"selfLink"`
	// State of the VPC access connector.
	State pulumi.StringOutput `pulumi:"state"`
	// The subnet in which to house the connector
	// Structure is documented below.
	Subnet ConnectorSubnetPtrOutput `pulumi:"subnet"`
}

Serverless VPC Access connector resource.

To get more information about Connector, see:

* [API documentation](https://cloud.google.com/vpc/docs/reference/vpcaccess/rest/v1/projects.locations.connectors) * How-to Guides

## Example Usage

### Vpc Access Connector

```go package main

import ( 

"github.com/pulumi/pulumi-gcp/sdk/v8/go/gcp/vpcaccess"
"github.com/pulumi/pulumi/sdk/v3/go/pulumi"

) 

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		_, err := vpcaccess.NewConnector(ctx, "connector", &vpcaccess.ConnectorArgs{
			Name:         pulumi.String("vpc-con"),
			IpCidrRange:  pulumi.String("10.8.0.0/28"),
			Network:      pulumi.String("default"),
			MinInstances: pulumi.Int(2),
			MaxInstances: pulumi.Int(3),
		})
		if err != nil {
			return err
		}
		return nil
	})
}

``` ### Vpc Access Connector Shared Vpc

```go package main

import ( 

"github.com/pulumi/pulumi-gcp/sdk/v8/go/gcp/compute"
"github.com/pulumi/pulumi-gcp/sdk/v8/go/gcp/vpcaccess"
"github.com/pulumi/pulumi/sdk/v3/go/pulumi"

) 

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		customTest, err := compute.NewSubnetwork(ctx, "custom_test", &compute.SubnetworkArgs{
			Name:        pulumi.String("vpc-con"),
			IpCidrRange: pulumi.String("10.2.0.0/28"),
			Region:      pulumi.String("us-central1"),
			Network:     pulumi.String("default"),
		})
		if err != nil {
			return err
		}
		_, err = vpcaccess.NewConnector(ctx, "connector", &vpcaccess.ConnectorArgs{
			Name: pulumi.String("vpc-con"),
			Subnet: &vpcaccess.ConnectorSubnetArgs{
				Name: customTest.Name,
			},
			MachineType:  pulumi.String("e2-standard-4"),
			MinInstances: pulumi.Int(2),
			MaxInstances: pulumi.Int(3),
		})
		if err != nil {
			return err
		}
		return nil
	})
}

```

## Import

Connector can be imported using any of these accepted formats:

* `projects/{{project}}/locations/{{region}}/connectors/{{name}}`

* `{{project}}/{{region}}/{{name}}`

* `{{region}}/{{name}}`

* `{{name}}`

When using the `pulumi import` command, Connector can be imported using one of the formats above. For example:

```sh $ pulumi import gcp:vpcaccess/connector:Connector default projects/{{project}}/locations/{{region}}/connectors/{{name}} ```

```sh $ pulumi import gcp:vpcaccess/connector:Connector default {{project}}/{{region}}/{{name}} ```

```sh $ pulumi import gcp:vpcaccess/connector:Connector default {{region}}/{{name}} ```

```sh $ pulumi import gcp:vpcaccess/connector:Connector default {{name}} ```

func GetConnector 

func GetConnector(ctx *pulumi.Context,
	name string, id pulumi.IDInput, state *ConnectorState, opts ...pulumi.ResourceOption) (*Connector, error)

GetConnector gets an existing Connector resource's state with the given name, ID, and optional state properties that are used to uniquely qualify the lookup (nil if not required).

func NewConnector 

func NewConnector(ctx *pulumi.Context,
	name string, args *ConnectorArgs, opts ...pulumi.ResourceOption) (*Connector, error)

NewConnector registers a new resource with the given unique name, arguments, and options.

func (*Connector) ElementType 

func (*Connector) ElementType() reflect.Type

func (*Connector) ToConnectorOutput 

func (i *Connector) ToConnectorOutput() ConnectorOutput

func (*Connector) ToConnectorOutputWithContext 

func (i *Connector) ToConnectorOutputWithContext(ctx context.Context) ConnectorOutput

type ConnectorArgs 

type ConnectorArgs struct {
	// The range of internal addresses that follows RFC 4632 notation. Example: `10.132.0.0/28`.
	IpCidrRange pulumi.StringPtrInput
	// Machine type of VM Instance underlying connector. Default is e2-micro
	MachineType pulumi.StringPtrInput
	// Maximum value of instances in autoscaling group underlying the connector. Value must be between 3 and 10, inclusive. Must be
	// higher than the value specified by min_instances.
	MaxInstances pulumi.IntPtrInput
	// Maximum throughput of the connector in Mbps, must be greater than `minThroughput`. Default is 300. Refers to the expected throughput
	// when using an e2-micro machine type. Value must be a multiple of 100 from 300 through 1000. Must be higher than the value specified by
	// min_throughput. If both maxThroughput and maxInstances are provided, maxInstances takes precedence over max_throughput. The use of
	// maxThroughput is discouraged in favor of max_instances.
	MaxThroughput pulumi.IntPtrInput
	// Minimum value of instances in autoscaling group underlying the connector. Value must be between 2 and 9, inclusive. Must be
	// lower than the value specified by max_instances.
	MinInstances pulumi.IntPtrInput
	// Minimum throughput of the connector in Mbps. Default and min is 200. Refers to the expected throughput when using an e2-micro machine type.
	// Value must be a multiple of 100 from 200 through 900. Must be lower than the value specified by max_throughput. If both minThroughput and
	// minInstances are provided, minInstances takes precedence over min_throughput. The use of minThroughput is discouraged in favor of min_instances.
	MinThroughput pulumi.IntPtrInput
	// The name of the resource (Max 25 characters).
	//
	// ***
	Name pulumi.StringPtrInput
	// Name or selfLink of the VPC network. Required if `ipCidrRange` is set.
	Network pulumi.StringPtrInput
	// The ID of the project in which the resource belongs.
	// If it is not provided, the provider project is used.
	Project pulumi.StringPtrInput
	// Region where the VPC Access connector resides. If it is not provided, the provider region is used.
	Region pulumi.StringPtrInput
	// The subnet in which to house the connector
	// Structure is documented below.
	Subnet ConnectorSubnetPtrInput
}

The set of arguments for constructing a Connector resource.

func (ConnectorArgs) ElementType 

func (ConnectorArgs) ElementType() reflect.Type

type ConnectorArray 

type ConnectorArray []ConnectorInput

func (ConnectorArray) ElementType 

func (ConnectorArray) ElementType() reflect.Type

func (ConnectorArray) ToConnectorArrayOutput 

func (i ConnectorArray) ToConnectorArrayOutput() ConnectorArrayOutput

func (ConnectorArray) ToConnectorArrayOutputWithContext 

func (i ConnectorArray) ToConnectorArrayOutputWithContext(ctx context.Context) ConnectorArrayOutput

type ConnectorArrayInput 

type ConnectorArrayInput interface {
	pulumi.Input

	ToConnectorArrayOutput() ConnectorArrayOutput
	ToConnectorArrayOutputWithContext(context.Context) ConnectorArrayOutput
}

ConnectorArrayInput is an input type that accepts ConnectorArray and ConnectorArrayOutput values. You can construct a concrete instance of `ConnectorArrayInput` via: 

ConnectorArray{ ConnectorArgs{...} }

type ConnectorArrayOutput 

type ConnectorArrayOutput struct{ *pulumi.OutputState }

func (ConnectorArrayOutput) ElementType 

func (ConnectorArrayOutput) ElementType() reflect.Type

func (ConnectorArrayOutput) Index 

func (o ConnectorArrayOutput) Index(i pulumi.IntInput) ConnectorOutput

func (ConnectorArrayOutput) ToConnectorArrayOutput 

func (o ConnectorArrayOutput) ToConnectorArrayOutput() ConnectorArrayOutput

func (ConnectorArrayOutput) ToConnectorArrayOutputWithContext 

func (o ConnectorArrayOutput) ToConnectorArrayOutputWithContext(ctx context.Context) ConnectorArrayOutput

type ConnectorInput 

type ConnectorInput interface {
	pulumi.Input

	ToConnectorOutput() ConnectorOutput
	ToConnectorOutputWithContext(ctx context.Context) ConnectorOutput
}

type ConnectorMap 

type ConnectorMap map[string]ConnectorInput

func (ConnectorMap) ElementType 

func (ConnectorMap) ElementType() reflect.Type

func (ConnectorMap) ToConnectorMapOutput 

func (i ConnectorMap) ToConnectorMapOutput() ConnectorMapOutput

func (ConnectorMap) ToConnectorMapOutputWithContext 

func (i ConnectorMap) ToConnectorMapOutputWithContext(ctx context.Context) ConnectorMapOutput

type ConnectorMapInput 

type ConnectorMapInput interface {
	pulumi.Input

	ToConnectorMapOutput() ConnectorMapOutput
	ToConnectorMapOutputWithContext(context.Context) ConnectorMapOutput
}

ConnectorMapInput is an input type that accepts ConnectorMap and ConnectorMapOutput values. You can construct a concrete instance of `ConnectorMapInput` via: 

ConnectorMap{ "key": ConnectorArgs{...} }

type ConnectorMapOutput 

type ConnectorMapOutput struct{ *pulumi.OutputState }

func (ConnectorMapOutput) ElementType 

func (ConnectorMapOutput) ElementType() reflect.Type

func (ConnectorMapOutput) MapIndex 

func (o ConnectorMapOutput) MapIndex(k pulumi.StringInput) ConnectorOutput

func (ConnectorMapOutput) ToConnectorMapOutput 

func (o ConnectorMapOutput) ToConnectorMapOutput() ConnectorMapOutput

func (ConnectorMapOutput) ToConnectorMapOutputWithContext 

func (o ConnectorMapOutput) ToConnectorMapOutputWithContext(ctx context.Context) ConnectorMapOutput

type ConnectorOutput 

type ConnectorOutput struct{ *pulumi.OutputState }

func (ConnectorOutput) ConnectedProjects 

func (o ConnectorOutput) ConnectedProjects() pulumi.StringArrayOutput

List of projects using the connector.

func (ConnectorOutput) ElementType 

func (ConnectorOutput) ElementType() reflect.Type

func (ConnectorOutput) IpCidrRange 

func (o ConnectorOutput) IpCidrRange() pulumi.StringPtrOutput

The range of internal addresses that follows RFC 4632 notation. Example: `10.132.0.0/28`.

func (ConnectorOutput) MachineType 

func (o ConnectorOutput) MachineType() pulumi.StringPtrOutput

Machine type of VM Instance underlying connector. Default is e2-micro

func (ConnectorOutput) MaxInstances 

func (o ConnectorOutput) MaxInstances() pulumi.IntOutput

Maximum value of instances in autoscaling group underlying the connector. Value must be between 3 and 10, inclusive. Must be higher than the value specified by min_instances.

func (ConnectorOutput) MaxThroughput 

func (o ConnectorOutput) MaxThroughput() pulumi.IntOutput

Maximum throughput of the connector in Mbps, must be greater than `minThroughput`. Default is 300. Refers to the expected throughput when using an e2-micro machine type. Value must be a multiple of 100 from 300 through 1000. Must be higher than the value specified by min_throughput. If both maxThroughput and maxInstances are provided, maxInstances takes precedence over max_throughput. The use of maxThroughput is discouraged in favor of max_instances.

func (ConnectorOutput) MinInstances 

func (o ConnectorOutput) MinInstances() pulumi.IntOutput

Minimum value of instances in autoscaling group underlying the connector. Value must be between 2 and 9, inclusive. Must be lower than the value specified by max_instances.

func (ConnectorOutput) MinThroughput 

func (o ConnectorOutput) MinThroughput() pulumi.IntOutput

Minimum throughput of the connector in Mbps. Default and min is 200. Refers to the expected throughput when using an e2-micro machine type. Value must be a multiple of 100 from 200 through 900. Must be lower than the value specified by max_throughput. If both minThroughput and minInstances are provided, minInstances takes precedence over min_throughput. The use of minThroughput is discouraged in favor of min_instances.

func (ConnectorOutput) Name 

func (o ConnectorOutput) Name() pulumi.StringOutput

The name of the resource (Max 25 characters).

***

func (ConnectorOutput) Network 

func (o ConnectorOutput) Network() pulumi.StringOutput

Name or selfLink of the VPC network. Required if `ipCidrRange` is set.

func (ConnectorOutput) Project 

func (o ConnectorOutput) Project() pulumi.StringOutput

The ID of the project in which the resource belongs. If it is not provided, the provider project is used.

func (ConnectorOutput) Region 

func (o ConnectorOutput) Region() pulumi.StringOutput

Region where the VPC Access connector resides. If it is not provided, the provider region is used. 

func (o ConnectorOutput) SelfLink() pulumi.StringOutput

The fully qualified name of this VPC connector

func (ConnectorOutput) State 

func (o ConnectorOutput) State() pulumi.StringOutput

State of the VPC access connector.

func (ConnectorOutput) Subnet 

func (o ConnectorOutput) Subnet() ConnectorSubnetPtrOutput

The subnet in which to house the connector Structure is documented below.

func (ConnectorOutput) ToConnectorOutput 

func (o ConnectorOutput) ToConnectorOutput() ConnectorOutput

func (ConnectorOutput) ToConnectorOutputWithContext 

func (o ConnectorOutput) ToConnectorOutputWithContext(ctx context.Context) ConnectorOutput

type ConnectorState 

type ConnectorState struct {
	// List of projects using the connector.
	ConnectedProjects pulumi.StringArrayInput
	// The range of internal addresses that follows RFC 4632 notation. Example: `10.132.0.0/28`.
	IpCidrRange pulumi.StringPtrInput
	// Machine type of VM Instance underlying connector. Default is e2-micro
	MachineType pulumi.StringPtrInput
	// Maximum value of instances in autoscaling group underlying the connector. Value must be between 3 and 10, inclusive. Must be
	// higher than the value specified by min_instances.
	MaxInstances pulumi.IntPtrInput
	// Maximum throughput of the connector in Mbps, must be greater than `minThroughput`. Default is 300. Refers to the expected throughput
	// when using an e2-micro machine type. Value must be a multiple of 100 from 300 through 1000. Must be higher than the value specified by
	// min_throughput. If both maxThroughput and maxInstances are provided, maxInstances takes precedence over max_throughput. The use of
	// maxThroughput is discouraged in favor of max_instances.
	MaxThroughput pulumi.IntPtrInput
	// Minimum value of instances in autoscaling group underlying the connector. Value must be between 2 and 9, inclusive. Must be
	// lower than the value specified by max_instances.
	MinInstances pulumi.IntPtrInput
	// Minimum throughput of the connector in Mbps. Default and min is 200. Refers to the expected throughput when using an e2-micro machine type.
	// Value must be a multiple of 100 from 200 through 900. Must be lower than the value specified by max_throughput. If both minThroughput and
	// minInstances are provided, minInstances takes precedence over min_throughput. The use of minThroughput is discouraged in favor of min_instances.
	MinThroughput pulumi.IntPtrInput
	// The name of the resource (Max 25 characters).
	//
	// ***
	Name pulumi.StringPtrInput
	// Name or selfLink of the VPC network. Required if `ipCidrRange` is set.
	Network pulumi.StringPtrInput
	// The ID of the project in which the resource belongs.
	// If it is not provided, the provider project is used.
	Project pulumi.StringPtrInput
	// Region where the VPC Access connector resides. If it is not provided, the provider region is used.
	Region pulumi.StringPtrInput
	// The fully qualified name of this VPC connector
	SelfLink pulumi.StringPtrInput
	// State of the VPC access connector.
	State pulumi.StringPtrInput
	// The subnet in which to house the connector
	// Structure is documented below.
	Subnet ConnectorSubnetPtrInput
}

func (ConnectorState) ElementType 

func (ConnectorState) ElementType() reflect.Type

type ConnectorSubnet 

type ConnectorSubnet struct {
	// Subnet name (relative, not fully qualified). E.g. if the full subnet selfLink is
	// https://compute.googleapis.com/compute/v1/projects/{project}/regions/{region}/subnetworks/{subnetName} the correct input for this field would be {subnetName}"
	Name *string `pulumi:"name"`
	// Project in which the subnet exists. If not set, this project is assumed to be the project for which the connector create request was issued.
	ProjectId *string `pulumi:"projectId"`
}

type ConnectorSubnetArgs 

type ConnectorSubnetArgs struct {
	// Subnet name (relative, not fully qualified). E.g. if the full subnet selfLink is
	// https://compute.googleapis.com/compute/v1/projects/{project}/regions/{region}/subnetworks/{subnetName} the correct input for this field would be {subnetName}"
	Name pulumi.StringPtrInput `pulumi:"name"`
	// Project in which the subnet exists. If not set, this project is assumed to be the project for which the connector create request was issued.
	ProjectId pulumi.StringPtrInput `pulumi:"projectId"`
}

func (ConnectorSubnetArgs) ElementType 

func (ConnectorSubnetArgs) ElementType() reflect.Type

func (ConnectorSubnetArgs) ToConnectorSubnetOutput 

func (i ConnectorSubnetArgs) ToConnectorSubnetOutput() ConnectorSubnetOutput

func (ConnectorSubnetArgs) ToConnectorSubnetOutputWithContext 

func (i ConnectorSubnetArgs) ToConnectorSubnetOutputWithContext(ctx context.Context) ConnectorSubnetOutput

func (ConnectorSubnetArgs) ToConnectorSubnetPtrOutput 

func (i ConnectorSubnetArgs) ToConnectorSubnetPtrOutput() ConnectorSubnetPtrOutput

func (ConnectorSubnetArgs) ToConnectorSubnetPtrOutputWithContext 

func (i ConnectorSubnetArgs) ToConnectorSubnetPtrOutputWithContext(ctx context.Context) ConnectorSubnetPtrOutput

type ConnectorSubnetInput 

type ConnectorSubnetInput interface {
	pulumi.Input

	ToConnectorSubnetOutput() ConnectorSubnetOutput
	ToConnectorSubnetOutputWithContext(context.Context) ConnectorSubnetOutput
}

ConnectorSubnetInput is an input type that accepts ConnectorSubnetArgs and ConnectorSubnetOutput values. You can construct a concrete instance of `ConnectorSubnetInput` via: 

ConnectorSubnetArgs{...}

type ConnectorSubnetOutput 

type ConnectorSubnetOutput struct{ *pulumi.OutputState }

func (ConnectorSubnetOutput) ElementType 

func (ConnectorSubnetOutput) ElementType() reflect.Type

func (ConnectorSubnetOutput) Name 

func (o ConnectorSubnetOutput) Name() pulumi.StringPtrOutput

Subnet name (relative, not fully qualified). E.g. if the full subnet selfLink is https://compute.googleapis.com/compute/v1/projects/{project}/regions/{region}/subnetworks/{subnetName} the correct input for this field would be {subnetName}"

func (ConnectorSubnetOutput) ProjectId 

func (o ConnectorSubnetOutput) ProjectId() pulumi.StringPtrOutput

Project in which the subnet exists. If not set, this project is assumed to be the project for which the connector create request was issued.

func (ConnectorSubnetOutput) ToConnectorSubnetOutput 

func (o ConnectorSubnetOutput) ToConnectorSubnetOutput() ConnectorSubnetOutput

func (ConnectorSubnetOutput) ToConnectorSubnetOutputWithContext 

func (o ConnectorSubnetOutput) ToConnectorSubnetOutputWithContext(ctx context.Context) ConnectorSubnetOutput

func (ConnectorSubnetOutput) ToConnectorSubnetPtrOutput 

func (o ConnectorSubnetOutput) ToConnectorSubnetPtrOutput() ConnectorSubnetPtrOutput

func (ConnectorSubnetOutput) ToConnectorSubnetPtrOutputWithContext 

func (o ConnectorSubnetOutput) ToConnectorSubnetPtrOutputWithContext(ctx context.Context) ConnectorSubnetPtrOutput

type ConnectorSubnetPtrInput 

type ConnectorSubnetPtrInput interface {
	pulumi.Input

	ToConnectorSubnetPtrOutput() ConnectorSubnetPtrOutput
	ToConnectorSubnetPtrOutputWithContext(context.Context) ConnectorSubnetPtrOutput
}

ConnectorSubnetPtrInput is an input type that accepts ConnectorSubnetArgs, ConnectorSubnetPtr and ConnectorSubnetPtrOutput values. You can construct a concrete instance of `ConnectorSubnetPtrInput` via: 

        ConnectorSubnetArgs{...}

or:

        nil

func ConnectorSubnetPtr 

func ConnectorSubnetPtr(v *ConnectorSubnetArgs) ConnectorSubnetPtrInput

type ConnectorSubnetPtrOutput 

type ConnectorSubnetPtrOutput struct{ *pulumi.OutputState }

func (ConnectorSubnetPtrOutput) Elem 

func (o ConnectorSubnetPtrOutput) Elem() ConnectorSubnetOutput

func (ConnectorSubnetPtrOutput) ElementType 

func (ConnectorSubnetPtrOutput) ElementType() reflect.Type

func (ConnectorSubnetPtrOutput) Name 

func (o ConnectorSubnetPtrOutput) Name() pulumi.StringPtrOutput

Subnet name (relative, not fully qualified). E.g. if the full subnet selfLink is https://compute.googleapis.com/compute/v1/projects/{project}/regions/{region}/subnetworks/{subnetName} the correct input for this field would be {subnetName}"

func (ConnectorSubnetPtrOutput) ProjectId 

func (o ConnectorSubnetPtrOutput) ProjectId() pulumi.StringPtrOutput

Project in which the subnet exists. If not set, this project is assumed to be the project for which the connector create request was issued.

func (ConnectorSubnetPtrOutput) ToConnectorSubnetPtrOutput 

func (o ConnectorSubnetPtrOutput) ToConnectorSubnetPtrOutput() ConnectorSubnetPtrOutput

func (ConnectorSubnetPtrOutput) ToConnectorSubnetPtrOutputWithContext 

func (o ConnectorSubnetPtrOutput) ToConnectorSubnetPtrOutputWithContext(ctx context.Context) ConnectorSubnetPtrOutput

type GetConnectorSubnet 

type GetConnectorSubnet struct {
	// Name of the resource.
	//
	// ***
	Name string `pulumi:"name"`
	// Project in which the subnet exists. If not set, this project is assumed to be the project for which the connector create request was issued.
	ProjectId string `pulumi:"projectId"`
}

type GetConnectorSubnetArgs 

type GetConnectorSubnetArgs struct {
	// Name of the resource.
	//
	// ***
	Name pulumi.StringInput `pulumi:"name"`
	// Project in which the subnet exists. If not set, this project is assumed to be the project for which the connector create request was issued.
	ProjectId pulumi.StringInput `pulumi:"projectId"`
}

func (GetConnectorSubnetArgs) ElementType 

func (GetConnectorSubnetArgs) ElementType() reflect.Type

func (GetConnectorSubnetArgs) ToGetConnectorSubnetOutput 

func (i GetConnectorSubnetArgs) ToGetConnectorSubnetOutput() GetConnectorSubnetOutput

func (GetConnectorSubnetArgs) ToGetConnectorSubnetOutputWithContext 

func (i GetConnectorSubnetArgs) ToGetConnectorSubnetOutputWithContext(ctx context.Context) GetConnectorSubnetOutput

type GetConnectorSubnetArray 

type GetConnectorSubnetArray []GetConnectorSubnetInput

func (GetConnectorSubnetArray) ElementType 

func (GetConnectorSubnetArray) ElementType() reflect.Type

func (GetConnectorSubnetArray) ToGetConnectorSubnetArrayOutput 

func (i GetConnectorSubnetArray) ToGetConnectorSubnetArrayOutput() GetConnectorSubnetArrayOutput

func (GetConnectorSubnetArray) ToGetConnectorSubnetArrayOutputWithContext 

func (i GetConnectorSubnetArray) ToGetConnectorSubnetArrayOutputWithContext(ctx context.Context) GetConnectorSubnetArrayOutput

type GetConnectorSubnetArrayInput 

type GetConnectorSubnetArrayInput interface {
	pulumi.Input

	ToGetConnectorSubnetArrayOutput() GetConnectorSubnetArrayOutput
	ToGetConnectorSubnetArrayOutputWithContext(context.Context) GetConnectorSubnetArrayOutput
}

GetConnectorSubnetArrayInput is an input type that accepts GetConnectorSubnetArray and GetConnectorSubnetArrayOutput values. You can construct a concrete instance of `GetConnectorSubnetArrayInput` via: 

GetConnectorSubnetArray{ GetConnectorSubnetArgs{...} }

type GetConnectorSubnetArrayOutput 

type GetConnectorSubnetArrayOutput struct{ *pulumi.OutputState }

func (GetConnectorSubnetArrayOutput) ElementType 

func (GetConnectorSubnetArrayOutput) ElementType() reflect.Type

func (GetConnectorSubnetArrayOutput) Index 

func (o GetConnectorSubnetArrayOutput) Index(i pulumi.IntInput) GetConnectorSubnetOutput

func (GetConnectorSubnetArrayOutput) ToGetConnectorSubnetArrayOutput 

func (o GetConnectorSubnetArrayOutput) ToGetConnectorSubnetArrayOutput() GetConnectorSubnetArrayOutput

func (GetConnectorSubnetArrayOutput) ToGetConnectorSubnetArrayOutputWithContext 

func (o GetConnectorSubnetArrayOutput) ToGetConnectorSubnetArrayOutputWithContext(ctx context.Context) GetConnectorSubnetArrayOutput

type GetConnectorSubnetInput 

type GetConnectorSubnetInput interface {
	pulumi.Input

	ToGetConnectorSubnetOutput() GetConnectorSubnetOutput
	ToGetConnectorSubnetOutputWithContext(context.Context) GetConnectorSubnetOutput
}

GetConnectorSubnetInput is an input type that accepts GetConnectorSubnetArgs and GetConnectorSubnetOutput values. You can construct a concrete instance of `GetConnectorSubnetInput` via: 

GetConnectorSubnetArgs{...}

type GetConnectorSubnetOutput 

type GetConnectorSubnetOutput struct{ *pulumi.OutputState }

func (GetConnectorSubnetOutput) ElementType 

func (GetConnectorSubnetOutput) ElementType() reflect.Type

func (GetConnectorSubnetOutput) Name 

func (o GetConnectorSubnetOutput) Name() pulumi.StringOutput

Name of the resource.

***

func (GetConnectorSubnetOutput) ProjectId 

func (o GetConnectorSubnetOutput) ProjectId() pulumi.StringOutput

Project in which the subnet exists. If not set, this project is assumed to be the project for which the connector create request was issued.

func (GetConnectorSubnetOutput) ToGetConnectorSubnetOutput 

func (o GetConnectorSubnetOutput) ToGetConnectorSubnetOutput() GetConnectorSubnetOutput

func (GetConnectorSubnetOutput) ToGetConnectorSubnetOutputWithContext 

func (o GetConnectorSubnetOutput) ToGetConnectorSubnetOutputWithContext(ctx context.Context) GetConnectorSubnetOutput

type LookupConnectorArgs 

type LookupConnectorArgs struct {
	// Name of the resource.
	//
	// ***
	Name string `pulumi:"name"`
	// The ID of the project in which the resource belongs. If it
	// is not provided, the provider project is used.
	Project *string `pulumi:"project"`
	// The region in which the resource belongs. If it
	// is not provided, the provider region is used.
	Region *string `pulumi:"region"`
}

A collection of arguments for invoking getConnector.

type LookupConnectorOutputArgs 

type LookupConnectorOutputArgs struct {
	// Name of the resource.
	//
	// ***
	Name pulumi.StringInput `pulumi:"name"`
	// The ID of the project in which the resource belongs. If it
	// is not provided, the provider project is used.
	Project pulumi.StringPtrInput `pulumi:"project"`
	// The region in which the resource belongs. If it
	// is not provided, the provider region is used.
	Region pulumi.StringPtrInput `pulumi:"region"`
}

A collection of arguments for invoking getConnector.

func (LookupConnectorOutputArgs) ElementType 

func (LookupConnectorOutputArgs) ElementType() reflect.Type

type LookupConnectorResult 

type LookupConnectorResult struct {
	ConnectedProjects []string `pulumi:"connectedProjects"`
	// The provider-assigned unique ID for this managed resource.
	Id            string               `pulumi:"id"`
	IpCidrRange   string               `pulumi:"ipCidrRange"`
	MachineType   string               `pulumi:"machineType"`
	MaxInstances  int                  `pulumi:"maxInstances"`
	MaxThroughput int                  `pulumi:"maxThroughput"`
	MinInstances  int                  `pulumi:"minInstances"`
	MinThroughput int                  `pulumi:"minThroughput"`
	Name          string               `pulumi:"name"`
	Network       string               `pulumi:"network"`
	Project       *string              `pulumi:"project"`
	Region        *string              `pulumi:"region"`
	SelfLink      string               `pulumi:"selfLink"`
	State         string               `pulumi:"state"`
	Subnets       []GetConnectorSubnet `pulumi:"subnets"`
}

A collection of values returned by getConnector.

func LookupConnector 

func LookupConnector(ctx *pulumi.Context, args *LookupConnectorArgs, opts ...pulumi.InvokeOption) (*LookupConnectorResult, error)

Get a Serverless VPC Access connector.

To get more information about Connector, see:

* [API documentation](https://cloud.google.com/vpc/docs/reference/vpcaccess/rest/v1/projects.locations.connectors) * How-to Guides

## Example Usage

```go package main

import ( 

"github.com/pulumi/pulumi-gcp/sdk/v8/go/gcp/vpcaccess"
"github.com/pulumi/pulumi/sdk/v3/go/pulumi"

) 

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		_, err := vpcaccess.LookupConnector(ctx, &vpcaccess.LookupConnectorArgs{
			Name: "vpc-con",
		}, nil)
		if err != nil {
			return err
		}
		_, err = vpcaccess.NewConnector(ctx, "connector", &vpcaccess.ConnectorArgs{
			Name:         pulumi.String("vpc-con"),
			IpCidrRange:  pulumi.String("10.8.0.0/28"),
			Network:      pulumi.String("default"),
			Region:       pulumi.String("us-central1"),
			MinInstances: pulumi.Int(2),
			MaxInstances: pulumi.Int(3),
		})
		if err != nil {
			return err
		}
		return nil
	})
}

```

type LookupConnectorResultOutput 

type LookupConnectorResultOutput struct{ *pulumi.OutputState }

A collection of values returned by getConnector.

func LookupConnectorOutput 

func LookupConnectorOutput(ctx *pulumi.Context, args LookupConnectorOutputArgs, opts ...pulumi.InvokeOption) LookupConnectorResultOutput

func (LookupConnectorResultOutput) ConnectedProjects 

func (o LookupConnectorResultOutput) ConnectedProjects() pulumi.StringArrayOutput

func (LookupConnectorResultOutput) ElementType 

func (LookupConnectorResultOutput) ElementType() reflect.Type

func (LookupConnectorResultOutput) Id 

func (o LookupConnectorResultOutput) Id() pulumi.StringOutput

The provider-assigned unique ID for this managed resource.

func (LookupConnectorResultOutput) IpCidrRange 

func (o LookupConnectorResultOutput) IpCidrRange() pulumi.StringOutput

func (LookupConnectorResultOutput) MachineType 

func (o LookupConnectorResultOutput) MachineType() pulumi.StringOutput

func (LookupConnectorResultOutput) MaxInstances 

func (o LookupConnectorResultOutput) MaxInstances() pulumi.IntOutput

func (LookupConnectorResultOutput) MaxThroughput 

func (o LookupConnectorResultOutput) MaxThroughput() pulumi.IntOutput

func (LookupConnectorResultOutput) MinInstances 

func (o LookupConnectorResultOutput) MinInstances() pulumi.IntOutput

func (LookupConnectorResultOutput) MinThroughput 

func (o LookupConnectorResultOutput) MinThroughput() pulumi.IntOutput

func (LookupConnectorResultOutput) Name 

func (o LookupConnectorResultOutput) Name() pulumi.StringOutput

func (LookupConnectorResultOutput) Network 

func (o LookupConnectorResultOutput) Network() pulumi.StringOutput

func (LookupConnectorResultOutput) Project 

func (o LookupConnectorResultOutput) Project() pulumi.StringPtrOutput

func (LookupConnectorResultOutput) Region 

func (o LookupConnectorResultOutput) Region() pulumi.StringPtrOutput
func (o LookupConnectorResultOutput) SelfLink() pulumi.StringOutput

func (LookupConnectorResultOutput) State 

func (o LookupConnectorResultOutput) State() pulumi.StringOutput

func (LookupConnectorResultOutput) Subnets 

func (o LookupConnectorResultOutput) Subnets() GetConnectorSubnetArrayOutput

func (LookupConnectorResultOutput) ToLookupConnectorResultOutput 

func (o LookupConnectorResultOutput) ToLookupConnectorResultOutput() LookupConnectorResultOutput

func (LookupConnectorResultOutput) ToLookupConnectorResultOutputWithContext 

func (o LookupConnectorResultOutput) ToLookupConnectorResultOutputWithContext(ctx context.Context) LookupConnectorResultOutput

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.