codebuild

package
v4.37.4 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Feb 14, 2022 License: Apache-2.0 Imports: 7 Imported by: 0

Documentation

Index

Constants

This section is empty.

Variables

This section is empty.

Functions

This section is empty.

Types

type Project 

type Project struct {
	pulumi.CustomResourceState

	// ARN of the CodeBuild project.
	Arn pulumi.StringOutput `pulumi:"arn"`
	// Configuration block. Detailed below.
	Artifacts ProjectArtifactsOutput `pulumi:"artifacts"`
	// Generates a publicly-accessible URL for the projects build badge. Available as `badgeUrl` attribute when enabled.
	BadgeEnabled pulumi.BoolPtrOutput `pulumi:"badgeEnabled"`
	// URL of the build badge when `badgeEnabled` is enabled.
	BadgeUrl pulumi.StringOutput `pulumi:"badgeUrl"`
	// Defines the batch build options for the project.
	BuildBatchConfig ProjectBuildBatchConfigPtrOutput `pulumi:"buildBatchConfig"`
	// Number of minutes, from 5 to 480 (8 hours), for AWS CodeBuild to wait until timing out any related build that does not get marked as completed. The default is 60 minutes.
	BuildTimeout pulumi.IntPtrOutput `pulumi:"buildTimeout"`
	// Configuration block. Detailed below.
	Cache ProjectCachePtrOutput `pulumi:"cache"`
	// Specify a maximum number of concurrent builds for the project. The value specified must be greater than 0 and less than the account concurrent running builds limit.
	ConcurrentBuildLimit pulumi.IntPtrOutput `pulumi:"concurrentBuildLimit"`
	// Short description of the project.
	Description pulumi.StringOutput `pulumi:"description"`
	// AWS Key Management Service (AWS KMS) customer master key (CMK) to be used for encrypting the build project's build output artifacts.
	EncryptionKey pulumi.StringOutput `pulumi:"encryptionKey"`
	// Configuration block. Detailed below.
	Environment ProjectEnvironmentOutput `pulumi:"environment"`
	// A set of file system locations to to mount inside the build. File system locations are documented below.
	FileSystemLocations ProjectFileSystemLocationArrayOutput `pulumi:"fileSystemLocations"`
	// Configuration block. Detailed below.
	LogsConfig ProjectLogsConfigPtrOutput `pulumi:"logsConfig"`
	// Name of the project. If `type` is set to `S3`, this is the name of the output artifact object
	Name pulumi.StringOutput `pulumi:"name"`
	// Specifies the visibility of the project's builds. Possible values are: `PUBLIC_READ` and `PRIVATE`. Default value is `PRIVATE`.
	ProjectVisibility pulumi.StringPtrOutput `pulumi:"projectVisibility"`
	// The project identifier used with the public build APIs.
	PublicProjectAlias pulumi.StringOutput `pulumi:"publicProjectAlias"`
	// Number of minutes, from 5 to 480 (8 hours), a build is allowed to be queued before it times out. The default is 8 hours.
	QueuedTimeout pulumi.IntPtrOutput `pulumi:"queuedTimeout"`
	// The ARN of the IAM role that enables CodeBuild to access the CloudWatch Logs and Amazon S3 artifacts for the project's builds.
	ResourceAccessRole pulumi.StringPtrOutput `pulumi:"resourceAccessRole"`
	// Configuration block. Detailed below.
	SecondaryArtifacts ProjectSecondaryArtifactArrayOutput `pulumi:"secondaryArtifacts"`
	// Configuration block. Detailed below.
	SecondarySourceVersions ProjectSecondarySourceVersionArrayOutput `pulumi:"secondarySourceVersions"`
	// Configuration block. Detailed below.
	SecondarySources ProjectSecondarySourceArrayOutput `pulumi:"secondarySources"`
	// Specifies the service role ARN for the batch build project.
	ServiceRole pulumi.StringOutput `pulumi:"serviceRole"`
	// Configuration block. Detailed below.
	Source ProjectSourceOutput `pulumi:"source"`
	// The source version for the corresponding source identifier. See [AWS docs](https://docs.aws.amazon.com/codebuild/latest/APIReference/API_ProjectSourceVersion.html#CodeBuild-Type-ProjectSourceVersion-sourceVersion) for more details.
	SourceVersion pulumi.StringPtrOutput `pulumi:"sourceVersion"`
	// Map of tags to assign to the resource. .If configured with a provider `defaultTags` configuration block present, tags with matching keys will overwrite those defined at the provider-level.
	Tags pulumi.StringMapOutput `pulumi:"tags"`
	// A map of tags assigned to the resource, including those inherited from the provider `defaultTags` configuration block.
	TagsAll pulumi.StringMapOutput `pulumi:"tagsAll"`
	// Configuration block. Detailed below.
	VpcConfig ProjectVpcConfigPtrOutput `pulumi:"vpcConfig"`
}

Provides a CodeBuild Project resource. See also the `codebuild.Webhook` resource, which manages the webhook to the source (e.g., the "rebuild every time a code change is pushed" option in the CodeBuild web console).

## Example Usage

```go package main

import ( 

"fmt"

"github.com/pulumi/pulumi-aws/sdk/v4/go/aws/codebuild"
"github.com/pulumi/pulumi-aws/sdk/v4/go/aws/iam"
"github.com/pulumi/pulumi-aws/sdk/v4/go/aws/s3"
"github.com/pulumi/pulumi/sdk/v3/go/pulumi"

) 

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		exampleBucket, err := s3.NewBucket(ctx, "exampleBucket", &s3.BucketArgs{
			Acl: pulumi.String("private"),
		})
		if err != nil {
			return err
		}
		exampleRole, err := iam.NewRole(ctx, "exampleRole", &iam.RoleArgs{
			AssumeRolePolicy: pulumi.Any(fmt.Sprintf("%v%v%v%v%v%v%v%v%v%v%v%v", "{\n", "  \"Version\": \"2012-10-17\",\n", "  \"Statement\": [\n", "    {\n", "      \"Effect\": \"Allow\",\n", "      \"Principal\": {\n", "        \"Service\": \"codebuild.amazonaws.com\"\n", "      },\n", "      \"Action\": \"sts:AssumeRole\"\n", "    }\n", "  ]\n", "}\n")),
		})
		if err != nil {
			return err
		}
		_, err = iam.NewRolePolicy(ctx, "exampleRolePolicy", &iam.RolePolicyArgs{
			Role: exampleRole.Name,
			Policy: pulumi.All(exampleBucket.Arn, exampleBucket.Arn).ApplyT(func(_args []interface{}) (string, error) {
				exampleBucketArn := _args[0].(string)
				exampleBucketArn1 := _args[1].(string)
				return fmt.Sprintf("%v%v%v%v%v%v%v%v%v%v%v%v%v%v%v%v%v%v%v%v%v%v%v%v%v%v%v%v%v%v%v%v%v%v%v%v%v%v%v%v%v%v%v%v%v%v%v%v%v%v%v%v%v%v%v%v%v%v%v%v%v%v%v%v%v", "{\n", "  \"Version\": \"2012-10-17\",\n", "  \"Statement\": [\n", "    {\n", "      \"Effect\": \"Allow\",\n", "      \"Resource\": [\n", "        \"*\"\n", "      ],\n", "      \"Action\": [\n", "        \"logs:CreateLogGroup\",\n", "        \"logs:CreateLogStream\",\n", "        \"logs:PutLogEvents\"\n", "      ]\n", "    },\n", "    {\n", "      \"Effect\": \"Allow\",\n", "      \"Action\": [\n", "        \"ec2:CreateNetworkInterface\",\n", "        \"ec2:DescribeDhcpOptions\",\n", "        \"ec2:DescribeNetworkInterfaces\",\n", "        \"ec2:DeleteNetworkInterface\",\n", "        \"ec2:DescribeSubnets\",\n", "        \"ec2:DescribeSecurityGroups\",\n", "        \"ec2:DescribeVpcs\"\n", "      ],\n", "      \"Resource\": \"*\"\n", "    },\n", "    {\n", "      \"Effect\": \"Allow\",\n", "      \"Action\": [\n", "        \"ec2:CreateNetworkInterfacePermission\"\n", "      ],\n", "      \"Resource\": [\n", "        \"arn:aws:ec2:us-east-1:123456789012:network-interface/*\"\n", "      ],\n", "      \"Condition\": {\n", "        \"StringEquals\": {\n", "          \"ec2:Subnet\": [\n", "            \"", aws_subnet.Example1.Arn, "\",\n", "            \"", aws_subnet.Example2.Arn, "\"\n", "          ],\n", "          \"ec2:AuthorizedService\": \"codebuild.amazonaws.com\"\n", "        }\n", "      }\n", "    },\n", "    {\n", "      \"Effect\": \"Allow\",\n", "      \"Action\": [\n", "        \"s3:*\"\n", "      ],\n", "      \"Resource\": [\n", "        \"", exampleBucketArn, "\",\n", "        \"", exampleBucketArn1, "/*\"\n", "      ]\n", "    }\n", "  ]\n", "}\n"), nil
			}).(pulumi.StringOutput),
		})
		if err != nil {
			return err
		}
		_, err = codebuild.NewProject(ctx, "exampleProject", &codebuild.ProjectArgs{
			Description:  pulumi.String("test_codebuild_project"),
			BuildTimeout: pulumi.Int(5),
			ServiceRole:  exampleRole.Arn,
			Artifacts: &codebuild.ProjectArtifactsArgs{
				Type: pulumi.String("NO_ARTIFACTS"),
			},
			Cache: &codebuild.ProjectCacheArgs{
				Type:     pulumi.String("S3"),
				Location: exampleBucket.Bucket,
			},
			Environment: &codebuild.ProjectEnvironmentArgs{
				ComputeType:              pulumi.String("BUILD_GENERAL1_SMALL"),
				Image:                    pulumi.String("aws/codebuild/standard:1.0"),
				Type:                     pulumi.String("LINUX_CONTAINER"),
				ImagePullCredentialsType: pulumi.String("CODEBUILD"),
				EnvironmentVariables: codebuild.ProjectEnvironmentEnvironmentVariableArray{
					&codebuild.ProjectEnvironmentEnvironmentVariableArgs{
						Name:  pulumi.String("SOME_KEY1"),
						Value: pulumi.String("SOME_VALUE1"),
					},
					&codebuild.ProjectEnvironmentEnvironmentVariableArgs{
						Name:  pulumi.String("SOME_KEY2"),
						Value: pulumi.String("SOME_VALUE2"),
						Type:  pulumi.String("PARAMETER_STORE"),
					},
				},
			},
			LogsConfig: &codebuild.ProjectLogsConfigArgs{
				CloudwatchLogs: &codebuild.ProjectLogsConfigCloudwatchLogsArgs{
					GroupName:  pulumi.String("log-group"),
					StreamName: pulumi.String("log-stream"),
				},
				S3Logs: &codebuild.ProjectLogsConfigS3LogsArgs{
					Status: pulumi.String("ENABLED"),
					Location: exampleBucket.ID().ApplyT(func(id string) (string, error) {
						return fmt.Sprintf("%v%v", id, "/build-log"), nil
					}).(pulumi.StringOutput),
				},
			},
			Source: &codebuild.ProjectSourceArgs{
				Type:          pulumi.String("GITHUB"),
				Location:      pulumi.String("https://github.com/mitchellh/packer.git"),
				GitCloneDepth: pulumi.Int(1),
				GitSubmodulesConfig: &codebuild.ProjectSourceGitSubmodulesConfigArgs{
					FetchSubmodules: pulumi.Bool(true),
				},
			},
			SourceVersion: pulumi.String("master"),
			VpcConfig: &codebuild.ProjectVpcConfigArgs{
				VpcId: pulumi.Any(aws_vpc.Example.Id),
				Subnets: pulumi.StringArray{
					pulumi.Any(aws_subnet.Example1.Id),
					pulumi.Any(aws_subnet.Example2.Id),
				},
				SecurityGroupIds: pulumi.StringArray{
					pulumi.Any(aws_security_group.Example1.Id),
					pulumi.Any(aws_security_group.Example2.Id),
				},
			},
			Tags: pulumi.StringMap{
				"Environment": pulumi.String("Test"),
			},
		})
		if err != nil {
			return err
		}
		_, err = codebuild.NewProject(ctx, "project-with-cache", &codebuild.ProjectArgs{
			Description:   pulumi.String("test_codebuild_project_cache"),
			BuildTimeout:  pulumi.Int(5),
			QueuedTimeout: pulumi.Int(5),
			ServiceRole:   exampleRole.Arn,
			Artifacts: &codebuild.ProjectArtifactsArgs{
				Type: pulumi.String("NO_ARTIFACTS"),
			},
			Cache: &codebuild.ProjectCacheArgs{
				Type: pulumi.String("LOCAL"),
				Modes: pulumi.StringArray{
					pulumi.String("LOCAL_DOCKER_LAYER_CACHE"),
					pulumi.String("LOCAL_SOURCE_CACHE"),
				},
			},
			Environment: &codebuild.ProjectEnvironmentArgs{
				ComputeType:              pulumi.String("BUILD_GENERAL1_SMALL"),
				Image:                    pulumi.String("aws/codebuild/standard:1.0"),
				Type:                     pulumi.String("LINUX_CONTAINER"),
				ImagePullCredentialsType: pulumi.String("CODEBUILD"),
				EnvironmentVariables: codebuild.ProjectEnvironmentEnvironmentVariableArray{
					&codebuild.ProjectEnvironmentEnvironmentVariableArgs{
						Name:  pulumi.String("SOME_KEY1"),
						Value: pulumi.String("SOME_VALUE1"),
					},
				},
			},
			Source: &codebuild.ProjectSourceArgs{
				Type:          pulumi.String("GITHUB"),
				Location:      pulumi.String("https://github.com/mitchellh/packer.git"),
				GitCloneDepth: pulumi.Int(1),
			},
			Tags: pulumi.StringMap{
				"Environment": pulumi.String("Test"),
			},
		})
		if err != nil {
			return err
		}
		return nil
	})
}

```

## Import

CodeBuild Project can be imported using the `name`, e.g.,

```sh 

$ pulumi import aws:codebuild/project:Project name project-name

```

func GetProject 

func GetProject(ctx *pulumi.Context,
	name string, id pulumi.IDInput, state *ProjectState, opts ...pulumi.ResourceOption) (*Project, error)

GetProject gets an existing Project resource's state with the given name, ID, and optional state properties that are used to uniquely qualify the lookup (nil if not required).

func NewProject 

func NewProject(ctx *pulumi.Context,
	name string, args *ProjectArgs, opts ...pulumi.ResourceOption) (*Project, error)

NewProject registers a new resource with the given unique name, arguments, and options.

func (*Project) ElementType 

func (*Project) ElementType() reflect.Type

func (*Project) ToProjectOutput 

func (i *Project) ToProjectOutput() ProjectOutput

func (*Project) ToProjectOutputWithContext 

func (i *Project) ToProjectOutputWithContext(ctx context.Context) ProjectOutput

type ProjectArgs 

type ProjectArgs struct {
	// Configuration block. Detailed below.
	Artifacts ProjectArtifactsInput
	// Generates a publicly-accessible URL for the projects build badge. Available as `badgeUrl` attribute when enabled.
	BadgeEnabled pulumi.BoolPtrInput
	// Defines the batch build options for the project.
	BuildBatchConfig ProjectBuildBatchConfigPtrInput
	// Number of minutes, from 5 to 480 (8 hours), for AWS CodeBuild to wait until timing out any related build that does not get marked as completed. The default is 60 minutes.
	BuildTimeout pulumi.IntPtrInput
	// Configuration block. Detailed below.
	Cache ProjectCachePtrInput
	// Specify a maximum number of concurrent builds for the project. The value specified must be greater than 0 and less than the account concurrent running builds limit.
	ConcurrentBuildLimit pulumi.IntPtrInput
	// Short description of the project.
	Description pulumi.StringPtrInput
	// AWS Key Management Service (AWS KMS) customer master key (CMK) to be used for encrypting the build project's build output artifacts.
	EncryptionKey pulumi.StringPtrInput
	// Configuration block. Detailed below.
	Environment ProjectEnvironmentInput
	// A set of file system locations to to mount inside the build. File system locations are documented below.
	FileSystemLocations ProjectFileSystemLocationArrayInput
	// Configuration block. Detailed below.
	LogsConfig ProjectLogsConfigPtrInput
	// Name of the project. If `type` is set to `S3`, this is the name of the output artifact object
	Name pulumi.StringPtrInput
	// Specifies the visibility of the project's builds. Possible values are: `PUBLIC_READ` and `PRIVATE`. Default value is `PRIVATE`.
	ProjectVisibility pulumi.StringPtrInput
	// Number of minutes, from 5 to 480 (8 hours), a build is allowed to be queued before it times out. The default is 8 hours.
	QueuedTimeout pulumi.IntPtrInput
	// The ARN of the IAM role that enables CodeBuild to access the CloudWatch Logs and Amazon S3 artifacts for the project's builds.
	ResourceAccessRole pulumi.StringPtrInput
	// Configuration block. Detailed below.
	SecondaryArtifacts ProjectSecondaryArtifactArrayInput
	// Configuration block. Detailed below.
	SecondarySourceVersions ProjectSecondarySourceVersionArrayInput
	// Configuration block. Detailed below.
	SecondarySources ProjectSecondarySourceArrayInput
	// Specifies the service role ARN for the batch build project.
	ServiceRole pulumi.StringInput
	// Configuration block. Detailed below.
	Source ProjectSourceInput
	// The source version for the corresponding source identifier. See [AWS docs](https://docs.aws.amazon.com/codebuild/latest/APIReference/API_ProjectSourceVersion.html#CodeBuild-Type-ProjectSourceVersion-sourceVersion) for more details.
	SourceVersion pulumi.StringPtrInput
	// Map of tags to assign to the resource. .If configured with a provider `defaultTags` configuration block present, tags with matching keys will overwrite those defined at the provider-level.
	Tags pulumi.StringMapInput
	// Configuration block. Detailed below.
	VpcConfig ProjectVpcConfigPtrInput
}

The set of arguments for constructing a Project resource.

func (ProjectArgs) ElementType 

func (ProjectArgs) ElementType() reflect.Type

type ProjectArray 

type ProjectArray []ProjectInput

func (ProjectArray) ElementType 

func (ProjectArray) ElementType() reflect.Type

func (ProjectArray) ToProjectArrayOutput 

func (i ProjectArray) ToProjectArrayOutput() ProjectArrayOutput

func (ProjectArray) ToProjectArrayOutputWithContext 

func (i ProjectArray) ToProjectArrayOutputWithContext(ctx context.Context) ProjectArrayOutput

type ProjectArrayInput 

type ProjectArrayInput interface {
	pulumi.Input

	ToProjectArrayOutput() ProjectArrayOutput
	ToProjectArrayOutputWithContext(context.Context) ProjectArrayOutput
}

ProjectArrayInput is an input type that accepts ProjectArray and ProjectArrayOutput values. You can construct a concrete instance of `ProjectArrayInput` via: 

ProjectArray{ ProjectArgs{...} }

type ProjectArrayOutput 

type ProjectArrayOutput struct{ *pulumi.OutputState }

func (ProjectArrayOutput) ElementType 

func (ProjectArrayOutput) ElementType() reflect.Type

func (ProjectArrayOutput) Index 

func (o ProjectArrayOutput) Index(i pulumi.IntInput) ProjectOutput

func (ProjectArrayOutput) ToProjectArrayOutput 

func (o ProjectArrayOutput) ToProjectArrayOutput() ProjectArrayOutput

func (ProjectArrayOutput) ToProjectArrayOutputWithContext 

func (o ProjectArrayOutput) ToProjectArrayOutputWithContext(ctx context.Context) ProjectArrayOutput

type ProjectArtifacts 

type ProjectArtifacts struct {
	// Artifact identifier. Must be the same specified inside the AWS CodeBuild build specification.
	ArtifactIdentifier *string `pulumi:"artifactIdentifier"`
	// Specifies the bucket owner's access for objects that another account uploads to their Amazon S3 bucket. By default, only the account that uploads the objects to the bucket has access to these objects. This property allows you to give the bucket owner access to these objects. Valid values are `NONE`, `READ_ONLY`, and `FULL`. your CodeBuild service role must have the `s3:PutBucketAcl` permission. This permission allows CodeBuild to modify the access control list for the bucket.
	BucketOwnerAccess *string `pulumi:"bucketOwnerAccess"`
	// Whether to disable encrypting output artifacts. If `type` is set to `NO_ARTIFACTS`, this value is ignored. Defaults to `false`.
	EncryptionDisabled *bool `pulumi:"encryptionDisabled"`
	// Location of the source code from git or s3.
	Location *string `pulumi:"location"`
	// Name of the project. If `type` is set to `S3`, this is the name of the output artifact object
	Name *string `pulumi:"name"`
	// Namespace to use in storing build artifacts. If `type` is set to `S3`, then valid values are `BUILD_ID` or `NONE`.
	NamespaceType *string `pulumi:"namespaceType"`
	// Whether a name specified in the build specification overrides the artifact name.
	OverrideArtifactName *bool `pulumi:"overrideArtifactName"`
	// Type of build output artifact to create. If `type` is set to `S3`, valid values are `NONE`, `ZIP`
	Packaging *string `pulumi:"packaging"`
	// If `type` is set to `S3`, this is the path to the output artifact.
	Path *string `pulumi:"path"`
	// Type of repository that contains the source code to be built. Valid values: `CODECOMMIT`, `CODEPIPELINE`, `GITHUB`, `GITHUB_ENTERPRISE`, `BITBUCKET`, `S3`, `NO_SOURCE`.
	Type string `pulumi:"type"`
}

type ProjectArtifactsArgs 

type ProjectArtifactsArgs struct {
	// Artifact identifier. Must be the same specified inside the AWS CodeBuild build specification.
	ArtifactIdentifier pulumi.StringPtrInput `pulumi:"artifactIdentifier"`
	// Specifies the bucket owner's access for objects that another account uploads to their Amazon S3 bucket. By default, only the account that uploads the objects to the bucket has access to these objects. This property allows you to give the bucket owner access to these objects. Valid values are `NONE`, `READ_ONLY`, and `FULL`. your CodeBuild service role must have the `s3:PutBucketAcl` permission. This permission allows CodeBuild to modify the access control list for the bucket.
	BucketOwnerAccess pulumi.StringPtrInput `pulumi:"bucketOwnerAccess"`
	// Whether to disable encrypting output artifacts. If `type` is set to `NO_ARTIFACTS`, this value is ignored. Defaults to `false`.
	EncryptionDisabled pulumi.BoolPtrInput `pulumi:"encryptionDisabled"`
	// Location of the source code from git or s3.
	Location pulumi.StringPtrInput `pulumi:"location"`
	// Name of the project. If `type` is set to `S3`, this is the name of the output artifact object
	Name pulumi.StringPtrInput `pulumi:"name"`
	// Namespace to use in storing build artifacts. If `type` is set to `S3`, then valid values are `BUILD_ID` or `NONE`.
	NamespaceType pulumi.StringPtrInput `pulumi:"namespaceType"`
	// Whether a name specified in the build specification overrides the artifact name.
	OverrideArtifactName pulumi.BoolPtrInput `pulumi:"overrideArtifactName"`
	// Type of build output artifact to create. If `type` is set to `S3`, valid values are `NONE`, `ZIP`
	Packaging pulumi.StringPtrInput `pulumi:"packaging"`
	// If `type` is set to `S3`, this is the path to the output artifact.
	Path pulumi.StringPtrInput `pulumi:"path"`
	// Type of repository that contains the source code to be built. Valid values: `CODECOMMIT`, `CODEPIPELINE`, `GITHUB`, `GITHUB_ENTERPRISE`, `BITBUCKET`, `S3`, `NO_SOURCE`.
	Type pulumi.StringInput `pulumi:"type"`
}

func (ProjectArtifactsArgs) ElementType 

func (ProjectArtifactsArgs) ElementType() reflect.Type

func (ProjectArtifactsArgs) ToProjectArtifactsOutput 

func (i ProjectArtifactsArgs) ToProjectArtifactsOutput() ProjectArtifactsOutput

func (ProjectArtifactsArgs) ToProjectArtifactsOutputWithContext 

func (i ProjectArtifactsArgs) ToProjectArtifactsOutputWithContext(ctx context.Context) ProjectArtifactsOutput

func (ProjectArtifactsArgs) ToProjectArtifactsPtrOutput 

func (i ProjectArtifactsArgs) ToProjectArtifactsPtrOutput() ProjectArtifactsPtrOutput

func (ProjectArtifactsArgs) ToProjectArtifactsPtrOutputWithContext 

func (i ProjectArtifactsArgs) ToProjectArtifactsPtrOutputWithContext(ctx context.Context) ProjectArtifactsPtrOutput

type ProjectArtifactsInput 

type ProjectArtifactsInput interface {
	pulumi.Input

	ToProjectArtifactsOutput() ProjectArtifactsOutput
	ToProjectArtifactsOutputWithContext(context.Context) ProjectArtifactsOutput
}

ProjectArtifactsInput is an input type that accepts ProjectArtifactsArgs and ProjectArtifactsOutput values. You can construct a concrete instance of `ProjectArtifactsInput` via: 

ProjectArtifactsArgs{...}

type ProjectArtifactsOutput 

type ProjectArtifactsOutput struct{ *pulumi.OutputState }

func (ProjectArtifactsOutput) ArtifactIdentifier 

func (o ProjectArtifactsOutput) ArtifactIdentifier() pulumi.StringPtrOutput

Artifact identifier. Must be the same specified inside the AWS CodeBuild build specification.

func (ProjectArtifactsOutput) BucketOwnerAccess added in v4.34.0 

func (o ProjectArtifactsOutput) BucketOwnerAccess() pulumi.StringPtrOutput

Specifies the bucket owner's access for objects that another account uploads to their Amazon S3 bucket. By default, only the account that uploads the objects to the bucket has access to these objects. This property allows you to give the bucket owner access to these objects. Valid values are `NONE`, `READ_ONLY`, and `FULL`. your CodeBuild service role must have the `s3:PutBucketAcl` permission. This permission allows CodeBuild to modify the access control list for the bucket.

func (ProjectArtifactsOutput) ElementType 

func (ProjectArtifactsOutput) ElementType() reflect.Type

func (ProjectArtifactsOutput) EncryptionDisabled 

func (o ProjectArtifactsOutput) EncryptionDisabled() pulumi.BoolPtrOutput

Whether to disable encrypting output artifacts. If `type` is set to `NO_ARTIFACTS`, this value is ignored. Defaults to `false`.

func (ProjectArtifactsOutput) Location 

func (o ProjectArtifactsOutput) Location() pulumi.StringPtrOutput

Location of the source code from git or s3.

func (ProjectArtifactsOutput) Name 

func (o ProjectArtifactsOutput) Name() pulumi.StringPtrOutput

Name of the project. If `type` is set to `S3`, this is the name of the output artifact object

func (ProjectArtifactsOutput) NamespaceType 

func (o ProjectArtifactsOutput) NamespaceType() pulumi.StringPtrOutput

Namespace to use in storing build artifacts. If `type` is set to `S3`, then valid values are `BUILD_ID` or `NONE`.

func (ProjectArtifactsOutput) OverrideArtifactName 

func (o ProjectArtifactsOutput) OverrideArtifactName() pulumi.BoolPtrOutput

Whether a name specified in the build specification overrides the artifact name.

func (ProjectArtifactsOutput) Packaging 

func (o ProjectArtifactsOutput) Packaging() pulumi.StringPtrOutput

Type of build output artifact to create. If `type` is set to `S3`, valid values are `NONE`, `ZIP`

func (ProjectArtifactsOutput) Path 

func (o ProjectArtifactsOutput) Path() pulumi.StringPtrOutput

If `type` is set to `S3`, this is the path to the output artifact.

func (ProjectArtifactsOutput) ToProjectArtifactsOutput 

func (o ProjectArtifactsOutput) ToProjectArtifactsOutput() ProjectArtifactsOutput

func (ProjectArtifactsOutput) ToProjectArtifactsOutputWithContext 

func (o ProjectArtifactsOutput) ToProjectArtifactsOutputWithContext(ctx context.Context) ProjectArtifactsOutput

func (ProjectArtifactsOutput) ToProjectArtifactsPtrOutput 

func (o ProjectArtifactsOutput) ToProjectArtifactsPtrOutput() ProjectArtifactsPtrOutput

func (ProjectArtifactsOutput) ToProjectArtifactsPtrOutputWithContext 

func (o ProjectArtifactsOutput) ToProjectArtifactsPtrOutputWithContext(ctx context.Context) ProjectArtifactsPtrOutput

func (ProjectArtifactsOutput) Type 

func (o ProjectArtifactsOutput) Type() pulumi.StringOutput

Type of repository that contains the source code to be built. Valid values: `CODECOMMIT`, `CODEPIPELINE`, `GITHUB`, `GITHUB_ENTERPRISE`, `BITBUCKET`, `S3`, `NO_SOURCE`.

type ProjectArtifactsPtrInput 

type ProjectArtifactsPtrInput interface {
	pulumi.Input

	ToProjectArtifactsPtrOutput() ProjectArtifactsPtrOutput
	ToProjectArtifactsPtrOutputWithContext(context.Context) ProjectArtifactsPtrOutput
}

ProjectArtifactsPtrInput is an input type that accepts ProjectArtifactsArgs, ProjectArtifactsPtr and ProjectArtifactsPtrOutput values. You can construct a concrete instance of `ProjectArtifactsPtrInput` via: 

        ProjectArtifactsArgs{...}

or:

        nil

func ProjectArtifactsPtr 

func ProjectArtifactsPtr(v *ProjectArtifactsArgs) ProjectArtifactsPtrInput

type ProjectArtifactsPtrOutput 

type ProjectArtifactsPtrOutput struct{ *pulumi.OutputState }

func (ProjectArtifactsPtrOutput) ArtifactIdentifier 

func (o ProjectArtifactsPtrOutput) ArtifactIdentifier() pulumi.StringPtrOutput

Artifact identifier. Must be the same specified inside the AWS CodeBuild build specification.

func (ProjectArtifactsPtrOutput) BucketOwnerAccess added in v4.34.0 

func (o ProjectArtifactsPtrOutput) BucketOwnerAccess() pulumi.StringPtrOutput

Specifies the bucket owner's access for objects that another account uploads to their Amazon S3 bucket. By default, only the account that uploads the objects to the bucket has access to these objects. This property allows you to give the bucket owner access to these objects. Valid values are `NONE`, `READ_ONLY`, and `FULL`. your CodeBuild service role must have the `s3:PutBucketAcl` permission. This permission allows CodeBuild to modify the access control list for the bucket.

func (ProjectArtifactsPtrOutput) Elem 

func (o ProjectArtifactsPtrOutput) Elem() ProjectArtifactsOutput

func (ProjectArtifactsPtrOutput) ElementType 

func (ProjectArtifactsPtrOutput) ElementType() reflect.Type

func (ProjectArtifactsPtrOutput) EncryptionDisabled 

func (o ProjectArtifactsPtrOutput) EncryptionDisabled() pulumi.BoolPtrOutput

Whether to disable encrypting output artifacts. If `type` is set to `NO_ARTIFACTS`, this value is ignored. Defaults to `false`.

func (ProjectArtifactsPtrOutput) Location 

func (o ProjectArtifactsPtrOutput) Location() pulumi.StringPtrOutput

Location of the source code from git or s3.

func (ProjectArtifactsPtrOutput) Name 

func (o ProjectArtifactsPtrOutput) Name() pulumi.StringPtrOutput

Name of the project. If `type` is set to `S3`, this is the name of the output artifact object

func (ProjectArtifactsPtrOutput) NamespaceType 

func (o ProjectArtifactsPtrOutput) NamespaceType() pulumi.StringPtrOutput

Namespace to use in storing build artifacts. If `type` is set to `S3`, then valid values are `BUILD_ID` or `NONE`.

func (ProjectArtifactsPtrOutput) OverrideArtifactName 

func (o ProjectArtifactsPtrOutput) OverrideArtifactName() pulumi.BoolPtrOutput

Whether a name specified in the build specification overrides the artifact name.

func (ProjectArtifactsPtrOutput) Packaging 

func (o ProjectArtifactsPtrOutput) Packaging() pulumi.StringPtrOutput

Type of build output artifact to create. If `type` is set to `S3`, valid values are `NONE`, `ZIP`

func (ProjectArtifactsPtrOutput) Path 

func (o ProjectArtifactsPtrOutput) Path() pulumi.StringPtrOutput

If `type` is set to `S3`, this is the path to the output artifact.

func (ProjectArtifactsPtrOutput) ToProjectArtifactsPtrOutput 

func (o ProjectArtifactsPtrOutput) ToProjectArtifactsPtrOutput() ProjectArtifactsPtrOutput

func (ProjectArtifactsPtrOutput) ToProjectArtifactsPtrOutputWithContext 

func (o ProjectArtifactsPtrOutput) ToProjectArtifactsPtrOutputWithContext(ctx context.Context) ProjectArtifactsPtrOutput

func (ProjectArtifactsPtrOutput) Type 

func (o ProjectArtifactsPtrOutput) Type() pulumi.StringPtrOutput

Type of repository that contains the source code to be built. Valid values: `CODECOMMIT`, `CODEPIPELINE`, `GITHUB`, `GITHUB_ENTERPRISE`, `BITBUCKET`, `S3`, `NO_SOURCE`.

type ProjectBuildBatchConfig added in v4.2.0 

type ProjectBuildBatchConfig struct {
	// Specifies if the build artifacts for the batch build should be combined into a single artifact location.
	CombineArtifacts *bool `pulumi:"combineArtifacts"`
	// Specifies the restrictions for the batch build.
	Restrictions *ProjectBuildBatchConfigRestrictions `pulumi:"restrictions"`
	// Specifies the service role ARN for the batch build project.
	ServiceRole string `pulumi:"serviceRole"`
	// Specifies the maximum amount of time, in minutes, that the batch build must be completed in.
	TimeoutInMins *int `pulumi:"timeoutInMins"`
}

type ProjectBuildBatchConfigArgs added in v4.2.0 

type ProjectBuildBatchConfigArgs struct {
	// Specifies if the build artifacts for the batch build should be combined into a single artifact location.
	CombineArtifacts pulumi.BoolPtrInput `pulumi:"combineArtifacts"`
	// Specifies the restrictions for the batch build.
	Restrictions ProjectBuildBatchConfigRestrictionsPtrInput `pulumi:"restrictions"`
	// Specifies the service role ARN for the batch build project.
	ServiceRole pulumi.StringInput `pulumi:"serviceRole"`
	// Specifies the maximum amount of time, in minutes, that the batch build must be completed in.
	TimeoutInMins pulumi.IntPtrInput `pulumi:"timeoutInMins"`
}

func (ProjectBuildBatchConfigArgs) ElementType added in v4.2.0 

func (ProjectBuildBatchConfigArgs) ElementType() reflect.Type

func (ProjectBuildBatchConfigArgs) ToProjectBuildBatchConfigOutput added in v4.2.0 

func (i ProjectBuildBatchConfigArgs) ToProjectBuildBatchConfigOutput() ProjectBuildBatchConfigOutput

func (ProjectBuildBatchConfigArgs) ToProjectBuildBatchConfigOutputWithContext added in v4.2.0 

func (i ProjectBuildBatchConfigArgs) ToProjectBuildBatchConfigOutputWithContext(ctx context.Context) ProjectBuildBatchConfigOutput

func (ProjectBuildBatchConfigArgs) ToProjectBuildBatchConfigPtrOutput added in v4.2.0 

func (i ProjectBuildBatchConfigArgs) ToProjectBuildBatchConfigPtrOutput() ProjectBuildBatchConfigPtrOutput

func (ProjectBuildBatchConfigArgs) ToProjectBuildBatchConfigPtrOutputWithContext added in v4.2.0 

func (i ProjectBuildBatchConfigArgs) ToProjectBuildBatchConfigPtrOutputWithContext(ctx context.Context) ProjectBuildBatchConfigPtrOutput

type ProjectBuildBatchConfigInput added in v4.2.0 

type ProjectBuildBatchConfigInput interface {
	pulumi.Input

	ToProjectBuildBatchConfigOutput() ProjectBuildBatchConfigOutput
	ToProjectBuildBatchConfigOutputWithContext(context.Context) ProjectBuildBatchConfigOutput
}

ProjectBuildBatchConfigInput is an input type that accepts ProjectBuildBatchConfigArgs and ProjectBuildBatchConfigOutput values. You can construct a concrete instance of `ProjectBuildBatchConfigInput` via: 

ProjectBuildBatchConfigArgs{...}

type ProjectBuildBatchConfigOutput added in v4.2.0 

type ProjectBuildBatchConfigOutput struct{ *pulumi.OutputState }

func (ProjectBuildBatchConfigOutput) CombineArtifacts added in v4.2.0 

func (o ProjectBuildBatchConfigOutput) CombineArtifacts() pulumi.BoolPtrOutput

Specifies if the build artifacts for the batch build should be combined into a single artifact location.

func (ProjectBuildBatchConfigOutput) ElementType added in v4.2.0 

func (ProjectBuildBatchConfigOutput) ElementType() reflect.Type

func (ProjectBuildBatchConfigOutput) Restrictions added in v4.2.0 

func (o ProjectBuildBatchConfigOutput) Restrictions() ProjectBuildBatchConfigRestrictionsPtrOutput

Specifies the restrictions for the batch build.

func (ProjectBuildBatchConfigOutput) ServiceRole added in v4.2.0 

func (o ProjectBuildBatchConfigOutput) ServiceRole() pulumi.StringOutput

Specifies the service role ARN for the batch build project.

func (ProjectBuildBatchConfigOutput) TimeoutInMins added in v4.2.0 

func (o ProjectBuildBatchConfigOutput) TimeoutInMins() pulumi.IntPtrOutput

Specifies the maximum amount of time, in minutes, that the batch build must be completed in.

func (ProjectBuildBatchConfigOutput) ToProjectBuildBatchConfigOutput added in v4.2.0 

func (o ProjectBuildBatchConfigOutput) ToProjectBuildBatchConfigOutput() ProjectBuildBatchConfigOutput

func (ProjectBuildBatchConfigOutput) ToProjectBuildBatchConfigOutputWithContext added in v4.2.0 

func (o ProjectBuildBatchConfigOutput) ToProjectBuildBatchConfigOutputWithContext(ctx context.Context) ProjectBuildBatchConfigOutput

func (ProjectBuildBatchConfigOutput) ToProjectBuildBatchConfigPtrOutput added in v4.2.0 

func (o ProjectBuildBatchConfigOutput) ToProjectBuildBatchConfigPtrOutput() ProjectBuildBatchConfigPtrOutput

func (ProjectBuildBatchConfigOutput) ToProjectBuildBatchConfigPtrOutputWithContext added in v4.2.0 

func (o ProjectBuildBatchConfigOutput) ToProjectBuildBatchConfigPtrOutputWithContext(ctx context.Context) ProjectBuildBatchConfigPtrOutput

type ProjectBuildBatchConfigPtrInput added in v4.2.0 

type ProjectBuildBatchConfigPtrInput interface {
	pulumi.Input

	ToProjectBuildBatchConfigPtrOutput() ProjectBuildBatchConfigPtrOutput
	ToProjectBuildBatchConfigPtrOutputWithContext(context.Context) ProjectBuildBatchConfigPtrOutput
}

ProjectBuildBatchConfigPtrInput is an input type that accepts ProjectBuildBatchConfigArgs, ProjectBuildBatchConfigPtr and ProjectBuildBatchConfigPtrOutput values. You can construct a concrete instance of `ProjectBuildBatchConfigPtrInput` via: 

        ProjectBuildBatchConfigArgs{...}

or:

        nil

func ProjectBuildBatchConfigPtr added in v4.2.0 

func ProjectBuildBatchConfigPtr(v *ProjectBuildBatchConfigArgs) ProjectBuildBatchConfigPtrInput

type ProjectBuildBatchConfigPtrOutput added in v4.2.0 

type ProjectBuildBatchConfigPtrOutput struct{ *pulumi.OutputState }

func (ProjectBuildBatchConfigPtrOutput) CombineArtifacts added in v4.2.0 

func (o ProjectBuildBatchConfigPtrOutput) CombineArtifacts() pulumi.BoolPtrOutput

Specifies if the build artifacts for the batch build should be combined into a single artifact location.

func (ProjectBuildBatchConfigPtrOutput) Elem added in v4.2.0 

func (o ProjectBuildBatchConfigPtrOutput) Elem() ProjectBuildBatchConfigOutput

func (ProjectBuildBatchConfigPtrOutput) ElementType added in v4.2.0 

func (ProjectBuildBatchConfigPtrOutput) ElementType() reflect.Type

func (ProjectBuildBatchConfigPtrOutput) Restrictions added in v4.2.0 

func (o ProjectBuildBatchConfigPtrOutput) Restrictions() ProjectBuildBatchConfigRestrictionsPtrOutput

Specifies the restrictions for the batch build.

func (ProjectBuildBatchConfigPtrOutput) ServiceRole added in v4.2.0 

func (o ProjectBuildBatchConfigPtrOutput) ServiceRole() pulumi.StringPtrOutput

Specifies the service role ARN for the batch build project.

func (ProjectBuildBatchConfigPtrOutput) TimeoutInMins added in v4.2.0 

func (o ProjectBuildBatchConfigPtrOutput) TimeoutInMins() pulumi.IntPtrOutput

Specifies the maximum amount of time, in minutes, that the batch build must be completed in.

func (ProjectBuildBatchConfigPtrOutput) ToProjectBuildBatchConfigPtrOutput added in v4.2.0 

func (o ProjectBuildBatchConfigPtrOutput) ToProjectBuildBatchConfigPtrOutput() ProjectBuildBatchConfigPtrOutput

func (ProjectBuildBatchConfigPtrOutput) ToProjectBuildBatchConfigPtrOutputWithContext added in v4.2.0 

func (o ProjectBuildBatchConfigPtrOutput) ToProjectBuildBatchConfigPtrOutputWithContext(ctx context.Context) ProjectBuildBatchConfigPtrOutput

type ProjectBuildBatchConfigRestrictions added in v4.2.0 

type ProjectBuildBatchConfigRestrictions struct {
	// An array of strings that specify the compute types that are allowed for the batch build. See [Build environment compute types](https://docs.aws.amazon.com/codebuild/latest/userguide/build-env-ref-compute-types.html) in the AWS CodeBuild User Guide for these values.
	ComputeTypesAlloweds []string `pulumi:"computeTypesAlloweds"`
	// Specifies the maximum number of builds allowed.
	MaximumBuildsAllowed *int `pulumi:"maximumBuildsAllowed"`
}

type ProjectBuildBatchConfigRestrictionsArgs added in v4.2.0 

type ProjectBuildBatchConfigRestrictionsArgs struct {
	// An array of strings that specify the compute types that are allowed for the batch build. See [Build environment compute types](https://docs.aws.amazon.com/codebuild/latest/userguide/build-env-ref-compute-types.html) in the AWS CodeBuild User Guide for these values.
	ComputeTypesAlloweds pulumi.StringArrayInput `pulumi:"computeTypesAlloweds"`
	// Specifies the maximum number of builds allowed.
	MaximumBuildsAllowed pulumi.IntPtrInput `pulumi:"maximumBuildsAllowed"`
}

func (ProjectBuildBatchConfigRestrictionsArgs) ElementType added in v4.2.0 

func (ProjectBuildBatchConfigRestrictionsArgs) ElementType() reflect.Type

func (ProjectBuildBatchConfigRestrictionsArgs) ToProjectBuildBatchConfigRestrictionsOutput added in v4.2.0 

func (i ProjectBuildBatchConfigRestrictionsArgs) ToProjectBuildBatchConfigRestrictionsOutput() ProjectBuildBatchConfigRestrictionsOutput

func (ProjectBuildBatchConfigRestrictionsArgs) ToProjectBuildBatchConfigRestrictionsOutputWithContext added in v4.2.0 

func (i ProjectBuildBatchConfigRestrictionsArgs) ToProjectBuildBatchConfigRestrictionsOutputWithContext(ctx context.Context) ProjectBuildBatchConfigRestrictionsOutput

func (ProjectBuildBatchConfigRestrictionsArgs) ToProjectBuildBatchConfigRestrictionsPtrOutput added in v4.2.0 

func (i ProjectBuildBatchConfigRestrictionsArgs) ToProjectBuildBatchConfigRestrictionsPtrOutput() ProjectBuildBatchConfigRestrictionsPtrOutput

func (ProjectBuildBatchConfigRestrictionsArgs) ToProjectBuildBatchConfigRestrictionsPtrOutputWithContext added in v4.2.0 

func (i ProjectBuildBatchConfigRestrictionsArgs) ToProjectBuildBatchConfigRestrictionsPtrOutputWithContext(ctx context.Context) ProjectBuildBatchConfigRestrictionsPtrOutput

type ProjectBuildBatchConfigRestrictionsInput added in v4.2.0 

type ProjectBuildBatchConfigRestrictionsInput interface {
	pulumi.Input

	ToProjectBuildBatchConfigRestrictionsOutput() ProjectBuildBatchConfigRestrictionsOutput
	ToProjectBuildBatchConfigRestrictionsOutputWithContext(context.Context) ProjectBuildBatchConfigRestrictionsOutput
}

ProjectBuildBatchConfigRestrictionsInput is an input type that accepts ProjectBuildBatchConfigRestrictionsArgs and ProjectBuildBatchConfigRestrictionsOutput values. You can construct a concrete instance of `ProjectBuildBatchConfigRestrictionsInput` via: 

ProjectBuildBatchConfigRestrictionsArgs{...}

type ProjectBuildBatchConfigRestrictionsOutput added in v4.2.0 

type ProjectBuildBatchConfigRestrictionsOutput struct{ *pulumi.OutputState }

func (ProjectBuildBatchConfigRestrictionsOutput) ComputeTypesAlloweds added in v4.2.0 

func (o ProjectBuildBatchConfigRestrictionsOutput) ComputeTypesAlloweds() pulumi.StringArrayOutput

An array of strings that specify the compute types that are allowed for the batch build. See [Build environment compute types](https://docs.aws.amazon.com/codebuild/latest/userguide/build-env-ref-compute-types.html) in the AWS CodeBuild User Guide for these values.

func (ProjectBuildBatchConfigRestrictionsOutput) ElementType added in v4.2.0 

func (ProjectBuildBatchConfigRestrictionsOutput) ElementType() reflect.Type

func (ProjectBuildBatchConfigRestrictionsOutput) MaximumBuildsAllowed added in v4.2.0 

func (o ProjectBuildBatchConfigRestrictionsOutput) MaximumBuildsAllowed() pulumi.IntPtrOutput

Specifies the maximum number of builds allowed.

func (ProjectBuildBatchConfigRestrictionsOutput) ToProjectBuildBatchConfigRestrictionsOutput added in v4.2.0 

func (o ProjectBuildBatchConfigRestrictionsOutput) ToProjectBuildBatchConfigRestrictionsOutput() ProjectBuildBatchConfigRestrictionsOutput

func (ProjectBuildBatchConfigRestrictionsOutput) ToProjectBuildBatchConfigRestrictionsOutputWithContext added in v4.2.0 

func (o ProjectBuildBatchConfigRestrictionsOutput) ToProjectBuildBatchConfigRestrictionsOutputWithContext(ctx context.Context) ProjectBuildBatchConfigRestrictionsOutput

func (ProjectBuildBatchConfigRestrictionsOutput) ToProjectBuildBatchConfigRestrictionsPtrOutput added in v4.2.0 

func (o ProjectBuildBatchConfigRestrictionsOutput) ToProjectBuildBatchConfigRestrictionsPtrOutput() ProjectBuildBatchConfigRestrictionsPtrOutput

func (ProjectBuildBatchConfigRestrictionsOutput) ToProjectBuildBatchConfigRestrictionsPtrOutputWithContext added in v4.2.0 

func (o ProjectBuildBatchConfigRestrictionsOutput) ToProjectBuildBatchConfigRestrictionsPtrOutputWithContext(ctx context.Context) ProjectBuildBatchConfigRestrictionsPtrOutput

type ProjectBuildBatchConfigRestrictionsPtrInput added in v4.2.0 

type ProjectBuildBatchConfigRestrictionsPtrInput interface {
	pulumi.Input

	ToProjectBuildBatchConfigRestrictionsPtrOutput() ProjectBuildBatchConfigRestrictionsPtrOutput
	ToProjectBuildBatchConfigRestrictionsPtrOutputWithContext(context.Context) ProjectBuildBatchConfigRestrictionsPtrOutput
}

ProjectBuildBatchConfigRestrictionsPtrInput is an input type that accepts ProjectBuildBatchConfigRestrictionsArgs, ProjectBuildBatchConfigRestrictionsPtr and ProjectBuildBatchConfigRestrictionsPtrOutput values. You can construct a concrete instance of `ProjectBuildBatchConfigRestrictionsPtrInput` via: 

        ProjectBuildBatchConfigRestrictionsArgs{...}

or:

        nil

func ProjectBuildBatchConfigRestrictionsPtr added in v4.2.0 

func ProjectBuildBatchConfigRestrictionsPtr(v *ProjectBuildBatchConfigRestrictionsArgs) ProjectBuildBatchConfigRestrictionsPtrInput

type ProjectBuildBatchConfigRestrictionsPtrOutput added in v4.2.0 

type ProjectBuildBatchConfigRestrictionsPtrOutput struct{ *pulumi.OutputState }

func (ProjectBuildBatchConfigRestrictionsPtrOutput) ComputeTypesAlloweds added in v4.2.0 

func (o ProjectBuildBatchConfigRestrictionsPtrOutput) ComputeTypesAlloweds() pulumi.StringArrayOutput

An array of strings that specify the compute types that are allowed for the batch build. See [Build environment compute types](https://docs.aws.amazon.com/codebuild/latest/userguide/build-env-ref-compute-types.html) in the AWS CodeBuild User Guide for these values.

func (ProjectBuildBatchConfigRestrictionsPtrOutput) Elem added in v4.2.0 

func (o ProjectBuildBatchConfigRestrictionsPtrOutput) Elem() ProjectBuildBatchConfigRestrictionsOutput

func (ProjectBuildBatchConfigRestrictionsPtrOutput) ElementType added in v4.2.0 

func (ProjectBuildBatchConfigRestrictionsPtrOutput) ElementType() reflect.Type

func (ProjectBuildBatchConfigRestrictionsPtrOutput) MaximumBuildsAllowed added in v4.2.0 

func (o ProjectBuildBatchConfigRestrictionsPtrOutput) MaximumBuildsAllowed() pulumi.IntPtrOutput

Specifies the maximum number of builds allowed.

func (ProjectBuildBatchConfigRestrictionsPtrOutput) ToProjectBuildBatchConfigRestrictionsPtrOutput added in v4.2.0 

func (o ProjectBuildBatchConfigRestrictionsPtrOutput) ToProjectBuildBatchConfigRestrictionsPtrOutput() ProjectBuildBatchConfigRestrictionsPtrOutput

func (ProjectBuildBatchConfigRestrictionsPtrOutput) ToProjectBuildBatchConfigRestrictionsPtrOutputWithContext added in v4.2.0 

func (o ProjectBuildBatchConfigRestrictionsPtrOutput) ToProjectBuildBatchConfigRestrictionsPtrOutputWithContext(ctx context.Context) ProjectBuildBatchConfigRestrictionsPtrOutput

type ProjectCache 

type ProjectCache struct {
	// Location of the source code from git or s3.
	Location *string `pulumi:"location"`
	// Specifies settings that AWS CodeBuild uses to store and reuse build dependencies. Valid values:  `LOCAL_SOURCE_CACHE`, `LOCAL_DOCKER_LAYER_CACHE`, `LOCAL_CUSTOM_CACHE`.
	Modes []string `pulumi:"modes"`
	// Type of repository that contains the source code to be built. Valid values: `CODECOMMIT`, `CODEPIPELINE`, `GITHUB`, `GITHUB_ENTERPRISE`, `BITBUCKET`, `S3`, `NO_SOURCE`.
	Type *string `pulumi:"type"`
}

type ProjectCacheArgs 

type ProjectCacheArgs struct {
	// Location of the source code from git or s3.
	Location pulumi.StringPtrInput `pulumi:"location"`
	// Specifies settings that AWS CodeBuild uses to store and reuse build dependencies. Valid values:  `LOCAL_SOURCE_CACHE`, `LOCAL_DOCKER_LAYER_CACHE`, `LOCAL_CUSTOM_CACHE`.
	Modes pulumi.StringArrayInput `pulumi:"modes"`
	// Type of repository that contains the source code to be built. Valid values: `CODECOMMIT`, `CODEPIPELINE`, `GITHUB`, `GITHUB_ENTERPRISE`, `BITBUCKET`, `S3`, `NO_SOURCE`.
	Type pulumi.StringPtrInput `pulumi:"type"`
}

func (ProjectCacheArgs) ElementType 

func (ProjectCacheArgs) ElementType() reflect.Type

func (ProjectCacheArgs) ToProjectCacheOutput 

func (i ProjectCacheArgs) ToProjectCacheOutput() ProjectCacheOutput

func (ProjectCacheArgs) ToProjectCacheOutputWithContext 

func (i ProjectCacheArgs) ToProjectCacheOutputWithContext(ctx context.Context) ProjectCacheOutput

func (ProjectCacheArgs) ToProjectCachePtrOutput 

func (i ProjectCacheArgs) ToProjectCachePtrOutput() ProjectCachePtrOutput

func (ProjectCacheArgs) ToProjectCachePtrOutputWithContext 

func (i ProjectCacheArgs) ToProjectCachePtrOutputWithContext(ctx context.Context) ProjectCachePtrOutput

type ProjectCacheInput 

type ProjectCacheInput interface {
	pulumi.Input

	ToProjectCacheOutput() ProjectCacheOutput
	ToProjectCacheOutputWithContext(context.Context) ProjectCacheOutput
}

ProjectCacheInput is an input type that accepts ProjectCacheArgs and ProjectCacheOutput values. You can construct a concrete instance of `ProjectCacheInput` via: 

ProjectCacheArgs{...}

type ProjectCacheOutput 

type ProjectCacheOutput struct{ *pulumi.OutputState }

func (ProjectCacheOutput) ElementType 

func (ProjectCacheOutput) ElementType() reflect.Type

func (ProjectCacheOutput) Location 

func (o ProjectCacheOutput) Location() pulumi.StringPtrOutput

Location of the source code from git or s3.

func (ProjectCacheOutput) Modes 

func (o ProjectCacheOutput) Modes() pulumi.StringArrayOutput

Specifies settings that AWS CodeBuild uses to store and reuse build dependencies. Valid values: `LOCAL_SOURCE_CACHE`, `LOCAL_DOCKER_LAYER_CACHE`, `LOCAL_CUSTOM_CACHE`.

func (ProjectCacheOutput) ToProjectCacheOutput 

func (o ProjectCacheOutput) ToProjectCacheOutput() ProjectCacheOutput

func (ProjectCacheOutput) ToProjectCacheOutputWithContext 

func (o ProjectCacheOutput) ToProjectCacheOutputWithContext(ctx context.Context) ProjectCacheOutput

func (ProjectCacheOutput) ToProjectCachePtrOutput 

func (o ProjectCacheOutput) ToProjectCachePtrOutput() ProjectCachePtrOutput

func (ProjectCacheOutput) ToProjectCachePtrOutputWithContext 

func (o ProjectCacheOutput) ToProjectCachePtrOutputWithContext(ctx context.Context) ProjectCachePtrOutput

func (ProjectCacheOutput) Type 

func (o ProjectCacheOutput) Type() pulumi.StringPtrOutput

Type of repository that contains the source code to be built. Valid values: `CODECOMMIT`, `CODEPIPELINE`, `GITHUB`, `GITHUB_ENTERPRISE`, `BITBUCKET`, `S3`, `NO_SOURCE`.

type ProjectCachePtrInput 

type ProjectCachePtrInput interface {
	pulumi.Input

	ToProjectCachePtrOutput() ProjectCachePtrOutput
	ToProjectCachePtrOutputWithContext(context.Context) ProjectCachePtrOutput
}

ProjectCachePtrInput is an input type that accepts ProjectCacheArgs, ProjectCachePtr and ProjectCachePtrOutput values. You can construct a concrete instance of `ProjectCachePtrInput` via: 

        ProjectCacheArgs{...}

or:

        nil

func ProjectCachePtr 

func ProjectCachePtr(v *ProjectCacheArgs) ProjectCachePtrInput

type ProjectCachePtrOutput 

type ProjectCachePtrOutput struct{ *pulumi.OutputState }

func (ProjectCachePtrOutput) Elem 

func (o ProjectCachePtrOutput) Elem() ProjectCacheOutput

func (ProjectCachePtrOutput) ElementType 

func (ProjectCachePtrOutput) ElementType() reflect.Type

func (ProjectCachePtrOutput) Location 

func (o ProjectCachePtrOutput) Location() pulumi.StringPtrOutput

Location of the source code from git or s3.

func (ProjectCachePtrOutput) Modes 

func (o ProjectCachePtrOutput) Modes() pulumi.StringArrayOutput

Specifies settings that AWS CodeBuild uses to store and reuse build dependencies. Valid values: `LOCAL_SOURCE_CACHE`, `LOCAL_DOCKER_LAYER_CACHE`, `LOCAL_CUSTOM_CACHE`.

func (ProjectCachePtrOutput) ToProjectCachePtrOutput 

func (o ProjectCachePtrOutput) ToProjectCachePtrOutput() ProjectCachePtrOutput

func (ProjectCachePtrOutput) ToProjectCachePtrOutputWithContext 

func (o ProjectCachePtrOutput) ToProjectCachePtrOutputWithContext(ctx context.Context) ProjectCachePtrOutput

func (ProjectCachePtrOutput) Type 

func (o ProjectCachePtrOutput) Type() pulumi.StringPtrOutput

Type of repository that contains the source code to be built. Valid values: `CODECOMMIT`, `CODEPIPELINE`, `GITHUB`, `GITHUB_ENTERPRISE`, `BITBUCKET`, `S3`, `NO_SOURCE`.

type ProjectEnvironment 

type ProjectEnvironment struct {
	// ARN of the S3 bucket, path prefix and object key that contains the PEM-encoded certificate.
	Certificate *string `pulumi:"certificate"`
	// Information about the compute resources the build project will use. Valid values: `BUILD_GENERAL1_SMALL`, `BUILD_GENERAL1_MEDIUM`, `BUILD_GENERAL1_LARGE`, `BUILD_GENERAL1_2XLARGE`. `BUILD_GENERAL1_SMALL` is only valid if `type` is set to `LINUX_CONTAINER`. When `type` is set to `LINUX_GPU_CONTAINER`, `computeType` must be `BUILD_GENERAL1_LARGE`.
	ComputeType string `pulumi:"computeType"`
	// Configuration block. Detailed below.
	EnvironmentVariables []ProjectEnvironmentEnvironmentVariable `pulumi:"environmentVariables"`
	// Docker image to use for this build project. Valid values include [Docker images provided by CodeBuild](https://docs.aws.amazon.com/codebuild/latest/userguide/build-env-ref-available.html) (e.g `aws/codebuild/standard:2.0`), [Docker Hub images](https://hub.docker.com/) (e.g., `nginx/nginx:latest`), and full Docker repository URIs such as those for ECR (e.g., `137112412989.dkr.ecr.us-west-2.amazonaws.com/amazonlinux:latest`).
	Image string `pulumi:"image"`
	// Type of credentials AWS CodeBuild uses to pull images in your build. Valid values: `CODEBUILD`, `SERVICE_ROLE`. When you use a cross-account or private registry image, you must use SERVICE_ROLE credentials. When you use an AWS CodeBuild curated image, you must use CodeBuild credentials. Defaults to `CODEBUILD`.
	ImagePullCredentialsType *string `pulumi:"imagePullCredentialsType"`
	// Whether to enable running the Docker daemon inside a Docker container. Defaults to `false`.
	PrivilegedMode *bool `pulumi:"privilegedMode"`
	// Configuration block. Detailed below.
	RegistryCredential *ProjectEnvironmentRegistryCredential `pulumi:"registryCredential"`
	// Type of repository that contains the source code to be built. Valid values: `CODECOMMIT`, `CODEPIPELINE`, `GITHUB`, `GITHUB_ENTERPRISE`, `BITBUCKET`, `S3`, `NO_SOURCE`.
	Type string `pulumi:"type"`
}

type ProjectEnvironmentArgs 

type ProjectEnvironmentArgs struct {
	// ARN of the S3 bucket, path prefix and object key that contains the PEM-encoded certificate.
	Certificate pulumi.StringPtrInput `pulumi:"certificate"`
	// Information about the compute resources the build project will use. Valid values: `BUILD_GENERAL1_SMALL`, `BUILD_GENERAL1_MEDIUM`, `BUILD_GENERAL1_LARGE`, `BUILD_GENERAL1_2XLARGE`. `BUILD_GENERAL1_SMALL` is only valid if `type` is set to `LINUX_CONTAINER`. When `type` is set to `LINUX_GPU_CONTAINER`, `computeType` must be `BUILD_GENERAL1_LARGE`.
	ComputeType pulumi.StringInput `pulumi:"computeType"`
	// Configuration block. Detailed below.
	EnvironmentVariables ProjectEnvironmentEnvironmentVariableArrayInput `pulumi:"environmentVariables"`
	// Docker image to use for this build project. Valid values include [Docker images provided by CodeBuild](https://docs.aws.amazon.com/codebuild/latest/userguide/build-env-ref-available.html) (e.g `aws/codebuild/standard:2.0`), [Docker Hub images](https://hub.docker.com/) (e.g., `nginx/nginx:latest`), and full Docker repository URIs such as those for ECR (e.g., `137112412989.dkr.ecr.us-west-2.amazonaws.com/amazonlinux:latest`).
	Image pulumi.StringInput `pulumi:"image"`
	// Type of credentials AWS CodeBuild uses to pull images in your build. Valid values: `CODEBUILD`, `SERVICE_ROLE`. When you use a cross-account or private registry image, you must use SERVICE_ROLE credentials. When you use an AWS CodeBuild curated image, you must use CodeBuild credentials. Defaults to `CODEBUILD`.
	ImagePullCredentialsType pulumi.StringPtrInput `pulumi:"imagePullCredentialsType"`
	// Whether to enable running the Docker daemon inside a Docker container. Defaults to `false`.
	PrivilegedMode pulumi.BoolPtrInput `pulumi:"privilegedMode"`
	// Configuration block. Detailed below.
	RegistryCredential ProjectEnvironmentRegistryCredentialPtrInput `pulumi:"registryCredential"`
	// Type of repository that contains the source code to be built. Valid values: `CODECOMMIT`, `CODEPIPELINE`, `GITHUB`, `GITHUB_ENTERPRISE`, `BITBUCKET`, `S3`, `NO_SOURCE`.
	Type pulumi.StringInput `pulumi:"type"`
}

func (ProjectEnvironmentArgs) ElementType 

func (ProjectEnvironmentArgs) ElementType() reflect.Type

func (ProjectEnvironmentArgs) ToProjectEnvironmentOutput 

func (i ProjectEnvironmentArgs) ToProjectEnvironmentOutput() ProjectEnvironmentOutput

func (ProjectEnvironmentArgs) ToProjectEnvironmentOutputWithContext 

func (i ProjectEnvironmentArgs) ToProjectEnvironmentOutputWithContext(ctx context.Context) ProjectEnvironmentOutput

func (ProjectEnvironmentArgs) ToProjectEnvironmentPtrOutput 

func (i ProjectEnvironmentArgs) ToProjectEnvironmentPtrOutput() ProjectEnvironmentPtrOutput

func (ProjectEnvironmentArgs) ToProjectEnvironmentPtrOutputWithContext 

func (i ProjectEnvironmentArgs) ToProjectEnvironmentPtrOutputWithContext(ctx context.Context) ProjectEnvironmentPtrOutput

type ProjectEnvironmentEnvironmentVariable 

type ProjectEnvironmentEnvironmentVariable struct {
	// Name of the project. If `type` is set to `S3`, this is the name of the output artifact object
	Name string `pulumi:"name"`
	// Type of repository that contains the source code to be built. Valid values: `CODECOMMIT`, `CODEPIPELINE`, `GITHUB`, `GITHUB_ENTERPRISE`, `BITBUCKET`, `S3`, `NO_SOURCE`.
	Type *string `pulumi:"type"`
	// Environment variable's value.
	Value string `pulumi:"value"`
}

type ProjectEnvironmentEnvironmentVariableArgs 

type ProjectEnvironmentEnvironmentVariableArgs struct {
	// Name of the project. If `type` is set to `S3`, this is the name of the output artifact object
	Name pulumi.StringInput `pulumi:"name"`
	// Type of repository that contains the source code to be built. Valid values: `CODECOMMIT`, `CODEPIPELINE`, `GITHUB`, `GITHUB_ENTERPRISE`, `BITBUCKET`, `S3`, `NO_SOURCE`.
	Type pulumi.StringPtrInput `pulumi:"type"`
	// Environment variable's value.
	Value pulumi.StringInput `pulumi:"value"`
}

func (ProjectEnvironmentEnvironmentVariableArgs) ElementType 

func (ProjectEnvironmentEnvironmentVariableArgs) ElementType() reflect.Type

func (ProjectEnvironmentEnvironmentVariableArgs) ToProjectEnvironmentEnvironmentVariableOutput 

func (i ProjectEnvironmentEnvironmentVariableArgs) ToProjectEnvironmentEnvironmentVariableOutput() ProjectEnvironmentEnvironmentVariableOutput

func (ProjectEnvironmentEnvironmentVariableArgs) ToProjectEnvironmentEnvironmentVariableOutputWithContext 

func (i ProjectEnvironmentEnvironmentVariableArgs) ToProjectEnvironmentEnvironmentVariableOutputWithContext(ctx context.Context) ProjectEnvironmentEnvironmentVariableOutput

type ProjectEnvironmentEnvironmentVariableArray 

type ProjectEnvironmentEnvironmentVariableArray []ProjectEnvironmentEnvironmentVariableInput

func (ProjectEnvironmentEnvironmentVariableArray) ElementType 

func (ProjectEnvironmentEnvironmentVariableArray) ElementType() reflect.Type

func (ProjectEnvironmentEnvironmentVariableArray) ToProjectEnvironmentEnvironmentVariableArrayOutput 

func (i ProjectEnvironmentEnvironmentVariableArray) ToProjectEnvironmentEnvironmentVariableArrayOutput() ProjectEnvironmentEnvironmentVariableArrayOutput

func (ProjectEnvironmentEnvironmentVariableArray) ToProjectEnvironmentEnvironmentVariableArrayOutputWithContext 

func (i ProjectEnvironmentEnvironmentVariableArray) ToProjectEnvironmentEnvironmentVariableArrayOutputWithContext(ctx context.Context) ProjectEnvironmentEnvironmentVariableArrayOutput

type ProjectEnvironmentEnvironmentVariableArrayInput 

type ProjectEnvironmentEnvironmentVariableArrayInput interface {
	pulumi.Input

	ToProjectEnvironmentEnvironmentVariableArrayOutput() ProjectEnvironmentEnvironmentVariableArrayOutput
	ToProjectEnvironmentEnvironmentVariableArrayOutputWithContext(context.Context) ProjectEnvironmentEnvironmentVariableArrayOutput
}

ProjectEnvironmentEnvironmentVariableArrayInput is an input type that accepts ProjectEnvironmentEnvironmentVariableArray and ProjectEnvironmentEnvironmentVariableArrayOutput values. You can construct a concrete instance of `ProjectEnvironmentEnvironmentVariableArrayInput` via: 

ProjectEnvironmentEnvironmentVariableArray{ ProjectEnvironmentEnvironmentVariableArgs{...} }

type ProjectEnvironmentEnvironmentVariableArrayOutput 

type ProjectEnvironmentEnvironmentVariableArrayOutput struct{ *pulumi.OutputState }

func (ProjectEnvironmentEnvironmentVariableArrayOutput) ElementType 

func (ProjectEnvironmentEnvironmentVariableArrayOutput) ElementType() reflect.Type

func (ProjectEnvironmentEnvironmentVariableArrayOutput) Index 

func (o ProjectEnvironmentEnvironmentVariableArrayOutput) Index(i pulumi.IntInput) ProjectEnvironmentEnvironmentVariableOutput

func (ProjectEnvironmentEnvironmentVariableArrayOutput) ToProjectEnvironmentEnvironmentVariableArrayOutput 

func (o ProjectEnvironmentEnvironmentVariableArrayOutput) ToProjectEnvironmentEnvironmentVariableArrayOutput() ProjectEnvironmentEnvironmentVariableArrayOutput

func (ProjectEnvironmentEnvironmentVariableArrayOutput) ToProjectEnvironmentEnvironmentVariableArrayOutputWithContext 

func (o ProjectEnvironmentEnvironmentVariableArrayOutput) ToProjectEnvironmentEnvironmentVariableArrayOutputWithContext(ctx context.Context) ProjectEnvironmentEnvironmentVariableArrayOutput

type ProjectEnvironmentEnvironmentVariableInput 

type ProjectEnvironmentEnvironmentVariableInput interface {
	pulumi.Input

	ToProjectEnvironmentEnvironmentVariableOutput() ProjectEnvironmentEnvironmentVariableOutput
	ToProjectEnvironmentEnvironmentVariableOutputWithContext(context.Context) ProjectEnvironmentEnvironmentVariableOutput
}

ProjectEnvironmentEnvironmentVariableInput is an input type that accepts ProjectEnvironmentEnvironmentVariableArgs and ProjectEnvironmentEnvironmentVariableOutput values. You can construct a concrete instance of `ProjectEnvironmentEnvironmentVariableInput` via: 

ProjectEnvironmentEnvironmentVariableArgs{...}

type ProjectEnvironmentEnvironmentVariableOutput 

type ProjectEnvironmentEnvironmentVariableOutput struct{ *pulumi.OutputState }

func (ProjectEnvironmentEnvironmentVariableOutput) ElementType 

func (ProjectEnvironmentEnvironmentVariableOutput) ElementType() reflect.Type

func (ProjectEnvironmentEnvironmentVariableOutput) Name 

func (o ProjectEnvironmentEnvironmentVariableOutput) Name() pulumi.StringOutput

Name of the project. If `type` is set to `S3`, this is the name of the output artifact object

func (ProjectEnvironmentEnvironmentVariableOutput) ToProjectEnvironmentEnvironmentVariableOutput 

func (o ProjectEnvironmentEnvironmentVariableOutput) ToProjectEnvironmentEnvironmentVariableOutput() ProjectEnvironmentEnvironmentVariableOutput

func (ProjectEnvironmentEnvironmentVariableOutput) ToProjectEnvironmentEnvironmentVariableOutputWithContext 

func (o ProjectEnvironmentEnvironmentVariableOutput) ToProjectEnvironmentEnvironmentVariableOutputWithContext(ctx context.Context) ProjectEnvironmentEnvironmentVariableOutput

func (ProjectEnvironmentEnvironmentVariableOutput) Type 

func (o ProjectEnvironmentEnvironmentVariableOutput) Type() pulumi.StringPtrOutput

Type of repository that contains the source code to be built. Valid values: `CODECOMMIT`, `CODEPIPELINE`, `GITHUB`, `GITHUB_ENTERPRISE`, `BITBUCKET`, `S3`, `NO_SOURCE`.

func (ProjectEnvironmentEnvironmentVariableOutput) Value 

func (o ProjectEnvironmentEnvironmentVariableOutput) Value() pulumi.StringOutput

Environment variable's value.

type ProjectEnvironmentInput 

type ProjectEnvironmentInput interface {
	pulumi.Input

	ToProjectEnvironmentOutput() ProjectEnvironmentOutput
	ToProjectEnvironmentOutputWithContext(context.Context) ProjectEnvironmentOutput
}

ProjectEnvironmentInput is an input type that accepts ProjectEnvironmentArgs and ProjectEnvironmentOutput values. You can construct a concrete instance of `ProjectEnvironmentInput` via: 

ProjectEnvironmentArgs{...}

type ProjectEnvironmentOutput 

type ProjectEnvironmentOutput struct{ *pulumi.OutputState }

func (ProjectEnvironmentOutput) Certificate 

func (o ProjectEnvironmentOutput) Certificate() pulumi.StringPtrOutput

ARN of the S3 bucket, path prefix and object key that contains the PEM-encoded certificate.

func (ProjectEnvironmentOutput) ComputeType 

func (o ProjectEnvironmentOutput) ComputeType() pulumi.StringOutput

Information about the compute resources the build project will use. Valid values: `BUILD_GENERAL1_SMALL`, `BUILD_GENERAL1_MEDIUM`, `BUILD_GENERAL1_LARGE`, `BUILD_GENERAL1_2XLARGE`. `BUILD_GENERAL1_SMALL` is only valid if `type` is set to `LINUX_CONTAINER`. When `type` is set to `LINUX_GPU_CONTAINER`, `computeType` must be `BUILD_GENERAL1_LARGE`.

func (ProjectEnvironmentOutput) ElementType 

func (ProjectEnvironmentOutput) ElementType() reflect.Type

func (ProjectEnvironmentOutput) EnvironmentVariables 

func (o ProjectEnvironmentOutput) EnvironmentVariables() ProjectEnvironmentEnvironmentVariableArrayOutput

Configuration block. Detailed below.

func (ProjectEnvironmentOutput) Image 

func (o ProjectEnvironmentOutput) Image() pulumi.StringOutput

Docker image to use for this build project. Valid values include [Docker images provided by CodeBuild](https://docs.aws.amazon.com/codebuild/latest/userguide/build-env-ref-available.html) (e.g `aws/codebuild/standard:2.0`), [Docker Hub images](https://hub.docker.com/) (e.g., `nginx/nginx:latest`), and full Docker repository URIs such as those for ECR (e.g., `137112412989.dkr.ecr.us-west-2.amazonaws.com/amazonlinux:latest`).

func (ProjectEnvironmentOutput) ImagePullCredentialsType 

func (o ProjectEnvironmentOutput) ImagePullCredentialsType() pulumi.StringPtrOutput

Type of credentials AWS CodeBuild uses to pull images in your build. Valid values: `CODEBUILD`, `SERVICE_ROLE`. When you use a cross-account or private registry image, you must use SERVICE_ROLE credentials. When you use an AWS CodeBuild curated image, you must use CodeBuild credentials. Defaults to `CODEBUILD`.

func (ProjectEnvironmentOutput) PrivilegedMode 

func (o ProjectEnvironmentOutput) PrivilegedMode() pulumi.BoolPtrOutput

Whether to enable running the Docker daemon inside a Docker container. Defaults to `false`.

func (ProjectEnvironmentOutput) RegistryCredential 

func (o ProjectEnvironmentOutput) RegistryCredential() ProjectEnvironmentRegistryCredentialPtrOutput

Configuration block. Detailed below.

func (ProjectEnvironmentOutput) ToProjectEnvironmentOutput 

func (o ProjectEnvironmentOutput) ToProjectEnvironmentOutput() ProjectEnvironmentOutput

func (ProjectEnvironmentOutput) ToProjectEnvironmentOutputWithContext 

func (o ProjectEnvironmentOutput) ToProjectEnvironmentOutputWithContext(ctx context.Context) ProjectEnvironmentOutput

func (ProjectEnvironmentOutput) ToProjectEnvironmentPtrOutput 

func (o ProjectEnvironmentOutput) ToProjectEnvironmentPtrOutput() ProjectEnvironmentPtrOutput

func (ProjectEnvironmentOutput) ToProjectEnvironmentPtrOutputWithContext 

func (o ProjectEnvironmentOutput) ToProjectEnvironmentPtrOutputWithContext(ctx context.Context) ProjectEnvironmentPtrOutput

func (ProjectEnvironmentOutput) Type 

func (o ProjectEnvironmentOutput) Type() pulumi.StringOutput

Type of repository that contains the source code to be built. Valid values: `CODECOMMIT`, `CODEPIPELINE`, `GITHUB`, `GITHUB_ENTERPRISE`, `BITBUCKET`, `S3`, `NO_SOURCE`.

type ProjectEnvironmentPtrInput 

type ProjectEnvironmentPtrInput interface {
	pulumi.Input

	ToProjectEnvironmentPtrOutput() ProjectEnvironmentPtrOutput
	ToProjectEnvironmentPtrOutputWithContext(context.Context) ProjectEnvironmentPtrOutput
}

ProjectEnvironmentPtrInput is an input type that accepts ProjectEnvironmentArgs, ProjectEnvironmentPtr and ProjectEnvironmentPtrOutput values. You can construct a concrete instance of `ProjectEnvironmentPtrInput` via: 

        ProjectEnvironmentArgs{...}

or:

        nil

func ProjectEnvironmentPtr 

func ProjectEnvironmentPtr(v *ProjectEnvironmentArgs) ProjectEnvironmentPtrInput

type ProjectEnvironmentPtrOutput 

type ProjectEnvironmentPtrOutput struct{ *pulumi.OutputState }

func (ProjectEnvironmentPtrOutput) Certificate 

func (o ProjectEnvironmentPtrOutput) Certificate() pulumi.StringPtrOutput

ARN of the S3 bucket, path prefix and object key that contains the PEM-encoded certificate.

func (ProjectEnvironmentPtrOutput) ComputeType 

func (o ProjectEnvironmentPtrOutput) ComputeType() pulumi.StringPtrOutput

Information about the compute resources the build project will use. Valid values: `BUILD_GENERAL1_SMALL`, `BUILD_GENERAL1_MEDIUM`, `BUILD_GENERAL1_LARGE`, `BUILD_GENERAL1_2XLARGE`. `BUILD_GENERAL1_SMALL` is only valid if `type` is set to `LINUX_CONTAINER`. When `type` is set to `LINUX_GPU_CONTAINER`, `computeType` must be `BUILD_GENERAL1_LARGE`.

func (ProjectEnvironmentPtrOutput) Elem 

func (o ProjectEnvironmentPtrOutput) Elem() ProjectEnvironmentOutput

func (ProjectEnvironmentPtrOutput) ElementType 

func (ProjectEnvironmentPtrOutput) ElementType() reflect.Type

func (ProjectEnvironmentPtrOutput) EnvironmentVariables 

func (o ProjectEnvironmentPtrOutput) EnvironmentVariables() ProjectEnvironmentEnvironmentVariableArrayOutput

Configuration block. Detailed below.

func (ProjectEnvironmentPtrOutput) Image 

func (o ProjectEnvironmentPtrOutput) Image() pulumi.StringPtrOutput

Docker image to use for this build project. Valid values include [Docker images provided by CodeBuild](https://docs.aws.amazon.com/codebuild/latest/userguide/build-env-ref-available.html) (e.g `aws/codebuild/standard:2.0`), [Docker Hub images](https://hub.docker.com/) (e.g., `nginx/nginx:latest`), and full Docker repository URIs such as those for ECR (e.g., `137112412989.dkr.ecr.us-west-2.amazonaws.com/amazonlinux:latest`).

func (ProjectEnvironmentPtrOutput) ImagePullCredentialsType 

func (o ProjectEnvironmentPtrOutput) ImagePullCredentialsType() pulumi.StringPtrOutput

Type of credentials AWS CodeBuild uses to pull images in your build. Valid values: `CODEBUILD`, `SERVICE_ROLE`. When you use a cross-account or private registry image, you must use SERVICE_ROLE credentials. When you use an AWS CodeBuild curated image, you must use CodeBuild credentials. Defaults to `CODEBUILD`.

func (ProjectEnvironmentPtrOutput) PrivilegedMode 

func (o ProjectEnvironmentPtrOutput) PrivilegedMode() pulumi.BoolPtrOutput

Whether to enable running the Docker daemon inside a Docker container. Defaults to `false`.

func (ProjectEnvironmentPtrOutput) RegistryCredential 

func (o ProjectEnvironmentPtrOutput) RegistryCredential() ProjectEnvironmentRegistryCredentialPtrOutput

Configuration block. Detailed below.

func (ProjectEnvironmentPtrOutput) ToProjectEnvironmentPtrOutput 

func (o ProjectEnvironmentPtrOutput) ToProjectEnvironmentPtrOutput() ProjectEnvironmentPtrOutput

func (ProjectEnvironmentPtrOutput) ToProjectEnvironmentPtrOutputWithContext 

func (o ProjectEnvironmentPtrOutput) ToProjectEnvironmentPtrOutputWithContext(ctx context.Context) ProjectEnvironmentPtrOutput

func (ProjectEnvironmentPtrOutput) Type 

func (o ProjectEnvironmentPtrOutput) Type() pulumi.StringPtrOutput

Type of repository that contains the source code to be built. Valid values: `CODECOMMIT`, `CODEPIPELINE`, `GITHUB`, `GITHUB_ENTERPRISE`, `BITBUCKET`, `S3`, `NO_SOURCE`.

type ProjectEnvironmentRegistryCredential 

type ProjectEnvironmentRegistryCredential struct {
	// ARN or name of credentials created using AWS Secrets Manager.
	Credential string `pulumi:"credential"`
	// Service that created the credentials to access a private Docker registry. Valid value: `SECRETS_MANAGER` (AWS Secrets Manager).
	CredentialProvider string `pulumi:"credentialProvider"`
}

type ProjectEnvironmentRegistryCredentialArgs 

type ProjectEnvironmentRegistryCredentialArgs struct {
	// ARN or name of credentials created using AWS Secrets Manager.
	Credential pulumi.StringInput `pulumi:"credential"`
	// Service that created the credentials to access a private Docker registry. Valid value: `SECRETS_MANAGER` (AWS Secrets Manager).
	CredentialProvider pulumi.StringInput `pulumi:"credentialProvider"`
}

func (ProjectEnvironmentRegistryCredentialArgs) ElementType 

func (ProjectEnvironmentRegistryCredentialArgs) ElementType() reflect.Type

func (ProjectEnvironmentRegistryCredentialArgs) ToProjectEnvironmentRegistryCredentialOutput 

func (i ProjectEnvironmentRegistryCredentialArgs) ToProjectEnvironmentRegistryCredentialOutput() ProjectEnvironmentRegistryCredentialOutput

func (ProjectEnvironmentRegistryCredentialArgs) ToProjectEnvironmentRegistryCredentialOutputWithContext 

func (i ProjectEnvironmentRegistryCredentialArgs) ToProjectEnvironmentRegistryCredentialOutputWithContext(ctx context.Context) ProjectEnvironmentRegistryCredentialOutput

func (ProjectEnvironmentRegistryCredentialArgs) ToProjectEnvironmentRegistryCredentialPtrOutput 

func (i ProjectEnvironmentRegistryCredentialArgs) ToProjectEnvironmentRegistryCredentialPtrOutput() ProjectEnvironmentRegistryCredentialPtrOutput

func (ProjectEnvironmentRegistryCredentialArgs) ToProjectEnvironmentRegistryCredentialPtrOutputWithContext 

func (i ProjectEnvironmentRegistryCredentialArgs) ToProjectEnvironmentRegistryCredentialPtrOutputWithContext(ctx context.Context) ProjectEnvironmentRegistryCredentialPtrOutput

type ProjectEnvironmentRegistryCredentialInput 

type ProjectEnvironmentRegistryCredentialInput interface {
	pulumi.Input

	ToProjectEnvironmentRegistryCredentialOutput() ProjectEnvironmentRegistryCredentialOutput
	ToProjectEnvironmentRegistryCredentialOutputWithContext(context.Context) ProjectEnvironmentRegistryCredentialOutput
}

ProjectEnvironmentRegistryCredentialInput is an input type that accepts ProjectEnvironmentRegistryCredentialArgs and ProjectEnvironmentRegistryCredentialOutput values. You can construct a concrete instance of `ProjectEnvironmentRegistryCredentialInput` via: 

ProjectEnvironmentRegistryCredentialArgs{...}

type ProjectEnvironmentRegistryCredentialOutput 

type ProjectEnvironmentRegistryCredentialOutput struct{ *pulumi.OutputState }

func (ProjectEnvironmentRegistryCredentialOutput) Credential 

func (o ProjectEnvironmentRegistryCredentialOutput) Credential() pulumi.StringOutput

ARN or name of credentials created using AWS Secrets Manager.

func (ProjectEnvironmentRegistryCredentialOutput) CredentialProvider 

func (o ProjectEnvironmentRegistryCredentialOutput) CredentialProvider() pulumi.StringOutput

Service that created the credentials to access a private Docker registry. Valid value: `SECRETS_MANAGER` (AWS Secrets Manager).

func (ProjectEnvironmentRegistryCredentialOutput) ElementType 

func (ProjectEnvironmentRegistryCredentialOutput) ElementType() reflect.Type

func (ProjectEnvironmentRegistryCredentialOutput) ToProjectEnvironmentRegistryCredentialOutput 

func (o ProjectEnvironmentRegistryCredentialOutput) ToProjectEnvironmentRegistryCredentialOutput() ProjectEnvironmentRegistryCredentialOutput

func (ProjectEnvironmentRegistryCredentialOutput) ToProjectEnvironmentRegistryCredentialOutputWithContext 

func (o ProjectEnvironmentRegistryCredentialOutput) ToProjectEnvironmentRegistryCredentialOutputWithContext(ctx context.Context) ProjectEnvironmentRegistryCredentialOutput

func (ProjectEnvironmentRegistryCredentialOutput) ToProjectEnvironmentRegistryCredentialPtrOutput 

func (o ProjectEnvironmentRegistryCredentialOutput) ToProjectEnvironmentRegistryCredentialPtrOutput() ProjectEnvironmentRegistryCredentialPtrOutput

func (ProjectEnvironmentRegistryCredentialOutput) ToProjectEnvironmentRegistryCredentialPtrOutputWithContext 

func (o ProjectEnvironmentRegistryCredentialOutput) ToProjectEnvironmentRegistryCredentialPtrOutputWithContext(ctx context.Context) ProjectEnvironmentRegistryCredentialPtrOutput

type ProjectEnvironmentRegistryCredentialPtrInput 

type ProjectEnvironmentRegistryCredentialPtrInput interface {
	pulumi.Input

	ToProjectEnvironmentRegistryCredentialPtrOutput() ProjectEnvironmentRegistryCredentialPtrOutput
	ToProjectEnvironmentRegistryCredentialPtrOutputWithContext(context.Context) ProjectEnvironmentRegistryCredentialPtrOutput
}

ProjectEnvironmentRegistryCredentialPtrInput is an input type that accepts ProjectEnvironmentRegistryCredentialArgs, ProjectEnvironmentRegistryCredentialPtr and ProjectEnvironmentRegistryCredentialPtrOutput values. You can construct a concrete instance of `ProjectEnvironmentRegistryCredentialPtrInput` via: 

        ProjectEnvironmentRegistryCredentialArgs{...}

or:

        nil

func ProjectEnvironmentRegistryCredentialPtr 

func ProjectEnvironmentRegistryCredentialPtr(v *ProjectEnvironmentRegistryCredentialArgs) ProjectEnvironmentRegistryCredentialPtrInput

type ProjectEnvironmentRegistryCredentialPtrOutput 

type ProjectEnvironmentRegistryCredentialPtrOutput struct{ *pulumi.OutputState }

func (ProjectEnvironmentRegistryCredentialPtrOutput) Credential 

func (o ProjectEnvironmentRegistryCredentialPtrOutput) Credential() pulumi.StringPtrOutput

ARN or name of credentials created using AWS Secrets Manager.

func (ProjectEnvironmentRegistryCredentialPtrOutput) CredentialProvider 

func (o ProjectEnvironmentRegistryCredentialPtrOutput) CredentialProvider() pulumi.StringPtrOutput

Service that created the credentials to access a private Docker registry. Valid value: `SECRETS_MANAGER` (AWS Secrets Manager).

func (ProjectEnvironmentRegistryCredentialPtrOutput) Elem 

func (o ProjectEnvironmentRegistryCredentialPtrOutput) Elem() ProjectEnvironmentRegistryCredentialOutput

func (ProjectEnvironmentRegistryCredentialPtrOutput) ElementType 

func (ProjectEnvironmentRegistryCredentialPtrOutput) ElementType() reflect.Type

func (ProjectEnvironmentRegistryCredentialPtrOutput) ToProjectEnvironmentRegistryCredentialPtrOutput 

func (o ProjectEnvironmentRegistryCredentialPtrOutput) ToProjectEnvironmentRegistryCredentialPtrOutput() ProjectEnvironmentRegistryCredentialPtrOutput

func (ProjectEnvironmentRegistryCredentialPtrOutput) ToProjectEnvironmentRegistryCredentialPtrOutputWithContext 

func (o ProjectEnvironmentRegistryCredentialPtrOutput) ToProjectEnvironmentRegistryCredentialPtrOutputWithContext(ctx context.Context) ProjectEnvironmentRegistryCredentialPtrOutput

type ProjectFileSystemLocation added in v4.3.0 

type ProjectFileSystemLocation struct {
	// The name used to access a file system created by Amazon EFS. CodeBuild creates an environment variable by appending the identifier in all capital letters to CODEBUILD\_. For example, if you specify my-efs for identifier, a new environment variable is create named CODEBUILD_MY-EFS.
	Identifier *string `pulumi:"identifier"`
	// A string that specifies the location of the file system created by Amazon EFS. Its format is `efs-dns-name:/directory-path`.
	Location *string `pulumi:"location"`
	// The mount options for a file system created by AWS EFS.
	MountOptions *string `pulumi:"mountOptions"`
	// The location in the container where you mount the file system.
	MountPoint *string `pulumi:"mountPoint"`
	// Authorization type to use. The only valid value is `OAUTH`. This data type is deprecated and is no longer accurate or used. Use the `codebuild.SourceCredential` resource instead.
	Type *string `pulumi:"type"`
}

type ProjectFileSystemLocationArgs added in v4.3.0 

type ProjectFileSystemLocationArgs struct {
	// The name used to access a file system created by Amazon EFS. CodeBuild creates an environment variable by appending the identifier in all capital letters to CODEBUILD\_. For example, if you specify my-efs for identifier, a new environment variable is create named CODEBUILD_MY-EFS.
	Identifier pulumi.StringPtrInput `pulumi:"identifier"`
	// A string that specifies the location of the file system created by Amazon EFS. Its format is `efs-dns-name:/directory-path`.
	Location pulumi.StringPtrInput `pulumi:"location"`
	// The mount options for a file system created by AWS EFS.
	MountOptions pulumi.StringPtrInput `pulumi:"mountOptions"`
	// The location in the container where you mount the file system.
	MountPoint pulumi.StringPtrInput `pulumi:"mountPoint"`
	// Authorization type to use. The only valid value is `OAUTH`. This data type is deprecated and is no longer accurate or used. Use the `codebuild.SourceCredential` resource instead.
	Type pulumi.StringPtrInput `pulumi:"type"`
}

func (ProjectFileSystemLocationArgs) ElementType added in v4.3.0 

func (ProjectFileSystemLocationArgs) ElementType() reflect.Type

func (ProjectFileSystemLocationArgs) ToProjectFileSystemLocationOutput added in v4.3.0 

func (i ProjectFileSystemLocationArgs) ToProjectFileSystemLocationOutput() ProjectFileSystemLocationOutput

func (ProjectFileSystemLocationArgs) ToProjectFileSystemLocationOutputWithContext added in v4.3.0 

func (i ProjectFileSystemLocationArgs) ToProjectFileSystemLocationOutputWithContext(ctx context.Context) ProjectFileSystemLocationOutput

type ProjectFileSystemLocationArray added in v4.3.0 

type ProjectFileSystemLocationArray []ProjectFileSystemLocationInput

func (ProjectFileSystemLocationArray) ElementType added in v4.3.0 

func (ProjectFileSystemLocationArray) ElementType() reflect.Type

func (ProjectFileSystemLocationArray) ToProjectFileSystemLocationArrayOutput added in v4.3.0 

func (i ProjectFileSystemLocationArray) ToProjectFileSystemLocationArrayOutput() ProjectFileSystemLocationArrayOutput

func (ProjectFileSystemLocationArray) ToProjectFileSystemLocationArrayOutputWithContext added in v4.3.0 

func (i ProjectFileSystemLocationArray) ToProjectFileSystemLocationArrayOutputWithContext(ctx context.Context) ProjectFileSystemLocationArrayOutput

type ProjectFileSystemLocationArrayInput added in v4.3.0 

type ProjectFileSystemLocationArrayInput interface {
	pulumi.Input

	ToProjectFileSystemLocationArrayOutput() ProjectFileSystemLocationArrayOutput
	ToProjectFileSystemLocationArrayOutputWithContext(context.Context) ProjectFileSystemLocationArrayOutput
}

ProjectFileSystemLocationArrayInput is an input type that accepts ProjectFileSystemLocationArray and ProjectFileSystemLocationArrayOutput values. You can construct a concrete instance of `ProjectFileSystemLocationArrayInput` via: 

ProjectFileSystemLocationArray{ ProjectFileSystemLocationArgs{...} }

type ProjectFileSystemLocationArrayOutput added in v4.3.0 

type ProjectFileSystemLocationArrayOutput struct{ *pulumi.OutputState }

func (ProjectFileSystemLocationArrayOutput) ElementType added in v4.3.0 

func (ProjectFileSystemLocationArrayOutput) ElementType() reflect.Type

func (ProjectFileSystemLocationArrayOutput) Index added in v4.3.0 

func (o ProjectFileSystemLocationArrayOutput) Index(i pulumi.IntInput) ProjectFileSystemLocationOutput

func (ProjectFileSystemLocationArrayOutput) ToProjectFileSystemLocationArrayOutput added in v4.3.0 

func (o ProjectFileSystemLocationArrayOutput) ToProjectFileSystemLocationArrayOutput() ProjectFileSystemLocationArrayOutput

func (ProjectFileSystemLocationArrayOutput) ToProjectFileSystemLocationArrayOutputWithContext added in v4.3.0 

func (o ProjectFileSystemLocationArrayOutput) ToProjectFileSystemLocationArrayOutputWithContext(ctx context.Context) ProjectFileSystemLocationArrayOutput

type ProjectFileSystemLocationInput added in v4.3.0 

type ProjectFileSystemLocationInput interface {
	pulumi.Input

	ToProjectFileSystemLocationOutput() ProjectFileSystemLocationOutput
	ToProjectFileSystemLocationOutputWithContext(context.Context) ProjectFileSystemLocationOutput
}

ProjectFileSystemLocationInput is an input type that accepts ProjectFileSystemLocationArgs and ProjectFileSystemLocationOutput values. You can construct a concrete instance of `ProjectFileSystemLocationInput` via: 

ProjectFileSystemLocationArgs{...}

type ProjectFileSystemLocationOutput added in v4.3.0 

type ProjectFileSystemLocationOutput struct{ *pulumi.OutputState }

func (ProjectFileSystemLocationOutput) ElementType added in v4.3.0 

func (ProjectFileSystemLocationOutput) ElementType() reflect.Type

func (ProjectFileSystemLocationOutput) Identifier added in v4.3.0 

func (o ProjectFileSystemLocationOutput) Identifier() pulumi.StringPtrOutput

The name used to access a file system created by Amazon EFS. CodeBuild creates an environment variable by appending the identifier in all capital letters to CODEBUILD\_. For example, if you specify my-efs for identifier, a new environment variable is create named CODEBUILD_MY-EFS.

func (ProjectFileSystemLocationOutput) Location added in v4.3.0 

func (o ProjectFileSystemLocationOutput) Location() pulumi.StringPtrOutput

A string that specifies the location of the file system created by Amazon EFS. Its format is `efs-dns-name:/directory-path`.

func (ProjectFileSystemLocationOutput) MountOptions added in v4.3.0 

func (o ProjectFileSystemLocationOutput) MountOptions() pulumi.StringPtrOutput

The mount options for a file system created by AWS EFS.

func (ProjectFileSystemLocationOutput) MountPoint added in v4.3.0 

func (o ProjectFileSystemLocationOutput) MountPoint() pulumi.StringPtrOutput

The location in the container where you mount the file system.

func (ProjectFileSystemLocationOutput) ToProjectFileSystemLocationOutput added in v4.3.0 

func (o ProjectFileSystemLocationOutput) ToProjectFileSystemLocationOutput() ProjectFileSystemLocationOutput

func (ProjectFileSystemLocationOutput) ToProjectFileSystemLocationOutputWithContext added in v4.3.0 

func (o ProjectFileSystemLocationOutput) ToProjectFileSystemLocationOutputWithContext(ctx context.Context) ProjectFileSystemLocationOutput

func (ProjectFileSystemLocationOutput) Type added in v4.3.0 

func (o ProjectFileSystemLocationOutput) Type() pulumi.StringPtrOutput

Authorization type to use. The only valid value is `OAUTH`. This data type is deprecated and is no longer accurate or used. Use the `codebuild.SourceCredential` resource instead.

type ProjectInput 

type ProjectInput interface {
	pulumi.Input

	ToProjectOutput() ProjectOutput
	ToProjectOutputWithContext(ctx context.Context) ProjectOutput
}

type ProjectLogsConfig 

type ProjectLogsConfig struct {
	// Configuration block. Detailed below.
	CloudwatchLogs *ProjectLogsConfigCloudwatchLogs `pulumi:"cloudwatchLogs"`
	// Configuration block. Detailed below.
	S3Logs *ProjectLogsConfigS3Logs `pulumi:"s3Logs"`
}

type ProjectLogsConfigArgs 

type ProjectLogsConfigArgs struct {
	// Configuration block. Detailed below.
	CloudwatchLogs ProjectLogsConfigCloudwatchLogsPtrInput `pulumi:"cloudwatchLogs"`
	// Configuration block. Detailed below.
	S3Logs ProjectLogsConfigS3LogsPtrInput `pulumi:"s3Logs"`
}

func (ProjectLogsConfigArgs) ElementType 

func (ProjectLogsConfigArgs) ElementType() reflect.Type

func (ProjectLogsConfigArgs) ToProjectLogsConfigOutput 

func (i ProjectLogsConfigArgs) ToProjectLogsConfigOutput() ProjectLogsConfigOutput

func (ProjectLogsConfigArgs) ToProjectLogsConfigOutputWithContext 

func (i ProjectLogsConfigArgs) ToProjectLogsConfigOutputWithContext(ctx context.Context) ProjectLogsConfigOutput

func (ProjectLogsConfigArgs) ToProjectLogsConfigPtrOutput 

func (i ProjectLogsConfigArgs) ToProjectLogsConfigPtrOutput() ProjectLogsConfigPtrOutput

func (ProjectLogsConfigArgs) ToProjectLogsConfigPtrOutputWithContext 

func (i ProjectLogsConfigArgs) ToProjectLogsConfigPtrOutputWithContext(ctx context.Context) ProjectLogsConfigPtrOutput

type ProjectLogsConfigCloudwatchLogs 

type ProjectLogsConfigCloudwatchLogs struct {
	// Group name of the logs in CloudWatch Logs.
	GroupName *string `pulumi:"groupName"`
	// Current status of logs in S3 for a build project. Valid values: `ENABLED`, `DISABLED`. Defaults to `DISABLED`.
	Status *string `pulumi:"status"`
	// Stream name of the logs in CloudWatch Logs.
	StreamName *string `pulumi:"streamName"`
}

type ProjectLogsConfigCloudwatchLogsArgs 

type ProjectLogsConfigCloudwatchLogsArgs struct {
	// Group name of the logs in CloudWatch Logs.
	GroupName pulumi.StringPtrInput `pulumi:"groupName"`
	// Current status of logs in S3 for a build project. Valid values: `ENABLED`, `DISABLED`. Defaults to `DISABLED`.
	Status pulumi.StringPtrInput `pulumi:"status"`
	// Stream name of the logs in CloudWatch Logs.
	StreamName pulumi.StringPtrInput `pulumi:"streamName"`
}

func (ProjectLogsConfigCloudwatchLogsArgs) ElementType 

func (ProjectLogsConfigCloudwatchLogsArgs) ElementType() reflect.Type

func (ProjectLogsConfigCloudwatchLogsArgs) ToProjectLogsConfigCloudwatchLogsOutput 

func (i ProjectLogsConfigCloudwatchLogsArgs) ToProjectLogsConfigCloudwatchLogsOutput() ProjectLogsConfigCloudwatchLogsOutput

func (ProjectLogsConfigCloudwatchLogsArgs) ToProjectLogsConfigCloudwatchLogsOutputWithContext 

func (i ProjectLogsConfigCloudwatchLogsArgs) ToProjectLogsConfigCloudwatchLogsOutputWithContext(ctx context.Context) ProjectLogsConfigCloudwatchLogsOutput

func (ProjectLogsConfigCloudwatchLogsArgs) ToProjectLogsConfigCloudwatchLogsPtrOutput 

func (i ProjectLogsConfigCloudwatchLogsArgs) ToProjectLogsConfigCloudwatchLogsPtrOutput() ProjectLogsConfigCloudwatchLogsPtrOutput

func (ProjectLogsConfigCloudwatchLogsArgs) ToProjectLogsConfigCloudwatchLogsPtrOutputWithContext 

func (i ProjectLogsConfigCloudwatchLogsArgs) ToProjectLogsConfigCloudwatchLogsPtrOutputWithContext(ctx context.Context) ProjectLogsConfigCloudwatchLogsPtrOutput

type ProjectLogsConfigCloudwatchLogsInput 

type ProjectLogsConfigCloudwatchLogsInput interface {
	pulumi.Input

	ToProjectLogsConfigCloudwatchLogsOutput() ProjectLogsConfigCloudwatchLogsOutput
	ToProjectLogsConfigCloudwatchLogsOutputWithContext(context.Context) ProjectLogsConfigCloudwatchLogsOutput
}

ProjectLogsConfigCloudwatchLogsInput is an input type that accepts ProjectLogsConfigCloudwatchLogsArgs and ProjectLogsConfigCloudwatchLogsOutput values. You can construct a concrete instance of `ProjectLogsConfigCloudwatchLogsInput` via: 

ProjectLogsConfigCloudwatchLogsArgs{...}

type ProjectLogsConfigCloudwatchLogsOutput 

type ProjectLogsConfigCloudwatchLogsOutput struct{ *pulumi.OutputState }

func (ProjectLogsConfigCloudwatchLogsOutput) ElementType 

func (ProjectLogsConfigCloudwatchLogsOutput) ElementType() reflect.Type

func (ProjectLogsConfigCloudwatchLogsOutput) GroupName 

func (o ProjectLogsConfigCloudwatchLogsOutput) GroupName() pulumi.StringPtrOutput

Group name of the logs in CloudWatch Logs.

func (ProjectLogsConfigCloudwatchLogsOutput) Status 

func (o ProjectLogsConfigCloudwatchLogsOutput) Status() pulumi.StringPtrOutput

Current status of logs in S3 for a build project. Valid values: `ENABLED`, `DISABLED`. Defaults to `DISABLED`.

func (ProjectLogsConfigCloudwatchLogsOutput) StreamName 

func (o ProjectLogsConfigCloudwatchLogsOutput) StreamName() pulumi.StringPtrOutput

Stream name of the logs in CloudWatch Logs.

func (ProjectLogsConfigCloudwatchLogsOutput) ToProjectLogsConfigCloudwatchLogsOutput 

func (o ProjectLogsConfigCloudwatchLogsOutput) ToProjectLogsConfigCloudwatchLogsOutput() ProjectLogsConfigCloudwatchLogsOutput

func (ProjectLogsConfigCloudwatchLogsOutput) ToProjectLogsConfigCloudwatchLogsOutputWithContext 

func (o ProjectLogsConfigCloudwatchLogsOutput) ToProjectLogsConfigCloudwatchLogsOutputWithContext(ctx context.Context) ProjectLogsConfigCloudwatchLogsOutput

func (ProjectLogsConfigCloudwatchLogsOutput) ToProjectLogsConfigCloudwatchLogsPtrOutput 

func (o ProjectLogsConfigCloudwatchLogsOutput) ToProjectLogsConfigCloudwatchLogsPtrOutput() ProjectLogsConfigCloudwatchLogsPtrOutput

func (ProjectLogsConfigCloudwatchLogsOutput) ToProjectLogsConfigCloudwatchLogsPtrOutputWithContext 

func (o ProjectLogsConfigCloudwatchLogsOutput) ToProjectLogsConfigCloudwatchLogsPtrOutputWithContext(ctx context.Context) ProjectLogsConfigCloudwatchLogsPtrOutput

type ProjectLogsConfigCloudwatchLogsPtrInput 

type ProjectLogsConfigCloudwatchLogsPtrInput interface {
	pulumi.Input

	ToProjectLogsConfigCloudwatchLogsPtrOutput() ProjectLogsConfigCloudwatchLogsPtrOutput
	ToProjectLogsConfigCloudwatchLogsPtrOutputWithContext(context.Context) ProjectLogsConfigCloudwatchLogsPtrOutput
}

ProjectLogsConfigCloudwatchLogsPtrInput is an input type that accepts ProjectLogsConfigCloudwatchLogsArgs, ProjectLogsConfigCloudwatchLogsPtr and ProjectLogsConfigCloudwatchLogsPtrOutput values. You can construct a concrete instance of `ProjectLogsConfigCloudwatchLogsPtrInput` via: 

        ProjectLogsConfigCloudwatchLogsArgs{...}

or:

        nil

func ProjectLogsConfigCloudwatchLogsPtr 

func ProjectLogsConfigCloudwatchLogsPtr(v *ProjectLogsConfigCloudwatchLogsArgs) ProjectLogsConfigCloudwatchLogsPtrInput

type ProjectLogsConfigCloudwatchLogsPtrOutput 

type ProjectLogsConfigCloudwatchLogsPtrOutput struct{ *pulumi.OutputState }

func (ProjectLogsConfigCloudwatchLogsPtrOutput) Elem 

func (o ProjectLogsConfigCloudwatchLogsPtrOutput) Elem() ProjectLogsConfigCloudwatchLogsOutput

func (ProjectLogsConfigCloudwatchLogsPtrOutput) ElementType 

func (ProjectLogsConfigCloudwatchLogsPtrOutput) ElementType() reflect.Type

func (ProjectLogsConfigCloudwatchLogsPtrOutput) GroupName 

func (o ProjectLogsConfigCloudwatchLogsPtrOutput) GroupName() pulumi.StringPtrOutput

Group name of the logs in CloudWatch Logs.

func (ProjectLogsConfigCloudwatchLogsPtrOutput) Status 

func (o ProjectLogsConfigCloudwatchLogsPtrOutput) Status() pulumi.StringPtrOutput

Current status of logs in S3 for a build project. Valid values: `ENABLED`, `DISABLED`. Defaults to `DISABLED`.

func (ProjectLogsConfigCloudwatchLogsPtrOutput) StreamName 

func (o ProjectLogsConfigCloudwatchLogsPtrOutput) StreamName() pulumi.StringPtrOutput

Stream name of the logs in CloudWatch Logs.

func (ProjectLogsConfigCloudwatchLogsPtrOutput) ToProjectLogsConfigCloudwatchLogsPtrOutput 

func (o ProjectLogsConfigCloudwatchLogsPtrOutput) ToProjectLogsConfigCloudwatchLogsPtrOutput() ProjectLogsConfigCloudwatchLogsPtrOutput

func (ProjectLogsConfigCloudwatchLogsPtrOutput) ToProjectLogsConfigCloudwatchLogsPtrOutputWithContext 

func (o ProjectLogsConfigCloudwatchLogsPtrOutput) ToProjectLogsConfigCloudwatchLogsPtrOutputWithContext(ctx context.Context) ProjectLogsConfigCloudwatchLogsPtrOutput

type ProjectLogsConfigInput 

type ProjectLogsConfigInput interface {
	pulumi.Input

	ToProjectLogsConfigOutput() ProjectLogsConfigOutput
	ToProjectLogsConfigOutputWithContext(context.Context) ProjectLogsConfigOutput
}

ProjectLogsConfigInput is an input type that accepts ProjectLogsConfigArgs and ProjectLogsConfigOutput values. You can construct a concrete instance of `ProjectLogsConfigInput` via: 

ProjectLogsConfigArgs{...}

type ProjectLogsConfigOutput 

type ProjectLogsConfigOutput struct{ *pulumi.OutputState }

func (ProjectLogsConfigOutput) CloudwatchLogs 

func (o ProjectLogsConfigOutput) CloudwatchLogs() ProjectLogsConfigCloudwatchLogsPtrOutput

Configuration block. Detailed below.

func (ProjectLogsConfigOutput) ElementType 

func (ProjectLogsConfigOutput) ElementType() reflect.Type

func (ProjectLogsConfigOutput) S3Logs 

func (o ProjectLogsConfigOutput) S3Logs() ProjectLogsConfigS3LogsPtrOutput

Configuration block. Detailed below.

func (ProjectLogsConfigOutput) ToProjectLogsConfigOutput 

func (o ProjectLogsConfigOutput) ToProjectLogsConfigOutput() ProjectLogsConfigOutput

func (ProjectLogsConfigOutput) ToProjectLogsConfigOutputWithContext 

func (o ProjectLogsConfigOutput) ToProjectLogsConfigOutputWithContext(ctx context.Context) ProjectLogsConfigOutput

func (ProjectLogsConfigOutput) ToProjectLogsConfigPtrOutput 

func (o ProjectLogsConfigOutput) ToProjectLogsConfigPtrOutput() ProjectLogsConfigPtrOutput

func (ProjectLogsConfigOutput) ToProjectLogsConfigPtrOutputWithContext 

func (o ProjectLogsConfigOutput) ToProjectLogsConfigPtrOutputWithContext(ctx context.Context) ProjectLogsConfigPtrOutput

type ProjectLogsConfigPtrInput 

type ProjectLogsConfigPtrInput interface {
	pulumi.Input

	ToProjectLogsConfigPtrOutput() ProjectLogsConfigPtrOutput
	ToProjectLogsConfigPtrOutputWithContext(context.Context) ProjectLogsConfigPtrOutput
}

ProjectLogsConfigPtrInput is an input type that accepts ProjectLogsConfigArgs, ProjectLogsConfigPtr and ProjectLogsConfigPtrOutput values. You can construct a concrete instance of `ProjectLogsConfigPtrInput` via: 

        ProjectLogsConfigArgs{...}

or:

        nil

func ProjectLogsConfigPtr 

func ProjectLogsConfigPtr(v *ProjectLogsConfigArgs) ProjectLogsConfigPtrInput

type ProjectLogsConfigPtrOutput 

type ProjectLogsConfigPtrOutput struct{ *pulumi.OutputState }

func (ProjectLogsConfigPtrOutput) CloudwatchLogs 

func (o ProjectLogsConfigPtrOutput) CloudwatchLogs() ProjectLogsConfigCloudwatchLogsPtrOutput

Configuration block. Detailed below.

func (ProjectLogsConfigPtrOutput) Elem 

func (o ProjectLogsConfigPtrOutput) Elem() ProjectLogsConfigOutput

func (ProjectLogsConfigPtrOutput) ElementType 

func (ProjectLogsConfigPtrOutput) ElementType() reflect.Type

func (ProjectLogsConfigPtrOutput) S3Logs 

func (o ProjectLogsConfigPtrOutput) S3Logs() ProjectLogsConfigS3LogsPtrOutput

Configuration block. Detailed below.

func (ProjectLogsConfigPtrOutput) ToProjectLogsConfigPtrOutput 

func (o ProjectLogsConfigPtrOutput) ToProjectLogsConfigPtrOutput() ProjectLogsConfigPtrOutput

func (ProjectLogsConfigPtrOutput) ToProjectLogsConfigPtrOutputWithContext 

func (o ProjectLogsConfigPtrOutput) ToProjectLogsConfigPtrOutputWithContext(ctx context.Context) ProjectLogsConfigPtrOutput

type ProjectLogsConfigS3Logs 

type ProjectLogsConfigS3Logs struct {
	// Specifies the bucket owner's access for objects that another account uploads to their Amazon S3 bucket. By default, only the account that uploads the objects to the bucket has access to these objects. This property allows you to give the bucket owner access to these objects. Valid values are `NONE`, `READ_ONLY`, and `FULL`. your CodeBuild service role must have the `s3:PutBucketAcl` permission. This permission allows CodeBuild to modify the access control list for the bucket.
	BucketOwnerAccess *string `pulumi:"bucketOwnerAccess"`
	// Whether to disable encrypting output artifacts. If `type` is set to `NO_ARTIFACTS`, this value is ignored. Defaults to `false`.
	EncryptionDisabled *bool `pulumi:"encryptionDisabled"`
	// Location of the source code from git or s3.
	Location *string `pulumi:"location"`
	// Current status of logs in S3 for a build project. Valid values: `ENABLED`, `DISABLED`. Defaults to `DISABLED`.
	Status *string `pulumi:"status"`
}

type ProjectLogsConfigS3LogsArgs 

type ProjectLogsConfigS3LogsArgs struct {
	// Specifies the bucket owner's access for objects that another account uploads to their Amazon S3 bucket. By default, only the account that uploads the objects to the bucket has access to these objects. This property allows you to give the bucket owner access to these objects. Valid values are `NONE`, `READ_ONLY`, and `FULL`. your CodeBuild service role must have the `s3:PutBucketAcl` permission. This permission allows CodeBuild to modify the access control list for the bucket.
	BucketOwnerAccess pulumi.StringPtrInput `pulumi:"bucketOwnerAccess"`
	// Whether to disable encrypting output artifacts. If `type` is set to `NO_ARTIFACTS`, this value is ignored. Defaults to `false`.
	EncryptionDisabled pulumi.BoolPtrInput `pulumi:"encryptionDisabled"`
	// Location of the source code from git or s3.
	Location pulumi.StringPtrInput `pulumi:"location"`
	// Current status of logs in S3 for a build project. Valid values: `ENABLED`, `DISABLED`. Defaults to `DISABLED`.
	Status pulumi.StringPtrInput `pulumi:"status"`
}

func (ProjectLogsConfigS3LogsArgs) ElementType 

func (ProjectLogsConfigS3LogsArgs) ElementType() reflect.Type

func (ProjectLogsConfigS3LogsArgs) ToProjectLogsConfigS3LogsOutput 

func (i ProjectLogsConfigS3LogsArgs) ToProjectLogsConfigS3LogsOutput() ProjectLogsConfigS3LogsOutput

func (ProjectLogsConfigS3LogsArgs) ToProjectLogsConfigS3LogsOutputWithContext 

func (i ProjectLogsConfigS3LogsArgs) ToProjectLogsConfigS3LogsOutputWithContext(ctx context.Context) ProjectLogsConfigS3LogsOutput

func (ProjectLogsConfigS3LogsArgs) ToProjectLogsConfigS3LogsPtrOutput 

func (i ProjectLogsConfigS3LogsArgs) ToProjectLogsConfigS3LogsPtrOutput() ProjectLogsConfigS3LogsPtrOutput

func (ProjectLogsConfigS3LogsArgs) ToProjectLogsConfigS3LogsPtrOutputWithContext 

func (i ProjectLogsConfigS3LogsArgs) ToProjectLogsConfigS3LogsPtrOutputWithContext(ctx context.Context) ProjectLogsConfigS3LogsPtrOutput

type ProjectLogsConfigS3LogsInput 

type ProjectLogsConfigS3LogsInput interface {
	pulumi.Input

	ToProjectLogsConfigS3LogsOutput() ProjectLogsConfigS3LogsOutput
	ToProjectLogsConfigS3LogsOutputWithContext(context.Context) ProjectLogsConfigS3LogsOutput
}

ProjectLogsConfigS3LogsInput is an input type that accepts ProjectLogsConfigS3LogsArgs and ProjectLogsConfigS3LogsOutput values. You can construct a concrete instance of `ProjectLogsConfigS3LogsInput` via: 

ProjectLogsConfigS3LogsArgs{...}

type ProjectLogsConfigS3LogsOutput 

type ProjectLogsConfigS3LogsOutput struct{ *pulumi.OutputState }

func (ProjectLogsConfigS3LogsOutput) BucketOwnerAccess added in v4.34.0 

func (o ProjectLogsConfigS3LogsOutput) BucketOwnerAccess() pulumi.StringPtrOutput

Specifies the bucket owner's access for objects that another account uploads to their Amazon S3 bucket. By default, only the account that uploads the objects to the bucket has access to these objects. This property allows you to give the bucket owner access to these objects. Valid values are `NONE`, `READ_ONLY`, and `FULL`. your CodeBuild service role must have the `s3:PutBucketAcl` permission. This permission allows CodeBuild to modify the access control list for the bucket.

func (ProjectLogsConfigS3LogsOutput) ElementType 

func (ProjectLogsConfigS3LogsOutput) ElementType() reflect.Type

func (ProjectLogsConfigS3LogsOutput) EncryptionDisabled 

func (o ProjectLogsConfigS3LogsOutput) EncryptionDisabled() pulumi.BoolPtrOutput

Whether to disable encrypting output artifacts. If `type` is set to `NO_ARTIFACTS`, this value is ignored. Defaults to `false`.

func (ProjectLogsConfigS3LogsOutput) Location 

func (o ProjectLogsConfigS3LogsOutput) Location() pulumi.StringPtrOutput

Location of the source code from git or s3.

func (ProjectLogsConfigS3LogsOutput) Status 

func (o ProjectLogsConfigS3LogsOutput) Status() pulumi.StringPtrOutput

Current status of logs in S3 for a build project. Valid values: `ENABLED`, `DISABLED`. Defaults to `DISABLED`.

func (ProjectLogsConfigS3LogsOutput) ToProjectLogsConfigS3LogsOutput 

func (o ProjectLogsConfigS3LogsOutput) ToProjectLogsConfigS3LogsOutput() ProjectLogsConfigS3LogsOutput

func (ProjectLogsConfigS3LogsOutput) ToProjectLogsConfigS3LogsOutputWithContext 

func (o ProjectLogsConfigS3LogsOutput) ToProjectLogsConfigS3LogsOutputWithContext(ctx context.Context) ProjectLogsConfigS3LogsOutput

func (ProjectLogsConfigS3LogsOutput) ToProjectLogsConfigS3LogsPtrOutput 

func (o ProjectLogsConfigS3LogsOutput) ToProjectLogsConfigS3LogsPtrOutput() ProjectLogsConfigS3LogsPtrOutput

func (ProjectLogsConfigS3LogsOutput) ToProjectLogsConfigS3LogsPtrOutputWithContext 

func (o ProjectLogsConfigS3LogsOutput) ToProjectLogsConfigS3LogsPtrOutputWithContext(ctx context.Context) ProjectLogsConfigS3LogsPtrOutput

type ProjectLogsConfigS3LogsPtrInput 

type ProjectLogsConfigS3LogsPtrInput interface {
	pulumi.Input

	ToProjectLogsConfigS3LogsPtrOutput() ProjectLogsConfigS3LogsPtrOutput
	ToProjectLogsConfigS3LogsPtrOutputWithContext(context.Context) ProjectLogsConfigS3LogsPtrOutput
}

ProjectLogsConfigS3LogsPtrInput is an input type that accepts ProjectLogsConfigS3LogsArgs, ProjectLogsConfigS3LogsPtr and ProjectLogsConfigS3LogsPtrOutput values. You can construct a concrete instance of `ProjectLogsConfigS3LogsPtrInput` via: 

        ProjectLogsConfigS3LogsArgs{...}

or:

        nil

func ProjectLogsConfigS3LogsPtr 

func ProjectLogsConfigS3LogsPtr(v *ProjectLogsConfigS3LogsArgs) ProjectLogsConfigS3LogsPtrInput

type ProjectLogsConfigS3LogsPtrOutput 

type ProjectLogsConfigS3LogsPtrOutput struct{ *pulumi.OutputState }

func (ProjectLogsConfigS3LogsPtrOutput) BucketOwnerAccess added in v4.34.0 

func (o ProjectLogsConfigS3LogsPtrOutput) BucketOwnerAccess() pulumi.StringPtrOutput

Specifies the bucket owner's access for objects that another account uploads to their Amazon S3 bucket. By default, only the account that uploads the objects to the bucket has access to these objects. This property allows you to give the bucket owner access to these objects. Valid values are `NONE`, `READ_ONLY`, and `FULL`. your CodeBuild service role must have the `s3:PutBucketAcl` permission. This permission allows CodeBuild to modify the access control list for the bucket.

func (ProjectLogsConfigS3LogsPtrOutput) Elem 

func (o ProjectLogsConfigS3LogsPtrOutput) Elem() ProjectLogsConfigS3LogsOutput

func (ProjectLogsConfigS3LogsPtrOutput) ElementType 

func (ProjectLogsConfigS3LogsPtrOutput) ElementType() reflect.Type

func (ProjectLogsConfigS3LogsPtrOutput) EncryptionDisabled 

func (o ProjectLogsConfigS3LogsPtrOutput) EncryptionDisabled() pulumi.BoolPtrOutput

Whether to disable encrypting output artifacts. If `type` is set to `NO_ARTIFACTS`, this value is ignored. Defaults to `false`.

func (ProjectLogsConfigS3LogsPtrOutput) Location 

func (o ProjectLogsConfigS3LogsPtrOutput) Location() pulumi.StringPtrOutput

Location of the source code from git or s3.

func (ProjectLogsConfigS3LogsPtrOutput) Status 

func (o ProjectLogsConfigS3LogsPtrOutput) Status() pulumi.StringPtrOutput

Current status of logs in S3 for a build project. Valid values: `ENABLED`, `DISABLED`. Defaults to `DISABLED`.

func (ProjectLogsConfigS3LogsPtrOutput) ToProjectLogsConfigS3LogsPtrOutput 

func (o ProjectLogsConfigS3LogsPtrOutput) ToProjectLogsConfigS3LogsPtrOutput() ProjectLogsConfigS3LogsPtrOutput

func (ProjectLogsConfigS3LogsPtrOutput) ToProjectLogsConfigS3LogsPtrOutputWithContext 

func (o ProjectLogsConfigS3LogsPtrOutput) ToProjectLogsConfigS3LogsPtrOutputWithContext(ctx context.Context) ProjectLogsConfigS3LogsPtrOutput

type ProjectMap 

type ProjectMap map[string]ProjectInput

func (ProjectMap) ElementType 

func (ProjectMap) ElementType() reflect.Type

func (ProjectMap) ToProjectMapOutput 

func (i ProjectMap) ToProjectMapOutput() ProjectMapOutput

func (ProjectMap) ToProjectMapOutputWithContext 

func (i ProjectMap) ToProjectMapOutputWithContext(ctx context.Context) ProjectMapOutput

type ProjectMapInput 

type ProjectMapInput interface {
	pulumi.Input

	ToProjectMapOutput() ProjectMapOutput
	ToProjectMapOutputWithContext(context.Context) ProjectMapOutput
}

ProjectMapInput is an input type that accepts ProjectMap and ProjectMapOutput values. You can construct a concrete instance of `ProjectMapInput` via: 

ProjectMap{ "key": ProjectArgs{...} }

type ProjectMapOutput 

type ProjectMapOutput struct{ *pulumi.OutputState }

func (ProjectMapOutput) ElementType 

func (ProjectMapOutput) ElementType() reflect.Type

func (ProjectMapOutput) MapIndex 

func (o ProjectMapOutput) MapIndex(k pulumi.StringInput) ProjectOutput

func (ProjectMapOutput) ToProjectMapOutput 

func (o ProjectMapOutput) ToProjectMapOutput() ProjectMapOutput

func (ProjectMapOutput) ToProjectMapOutputWithContext 

func (o ProjectMapOutput) ToProjectMapOutputWithContext(ctx context.Context) ProjectMapOutput

type ProjectOutput 

type ProjectOutput struct{ *pulumi.OutputState }

func (ProjectOutput) ElementType 

func (ProjectOutput) ElementType() reflect.Type

func (ProjectOutput) ToProjectOutput 

func (o ProjectOutput) ToProjectOutput() ProjectOutput

func (ProjectOutput) ToProjectOutputWithContext 

func (o ProjectOutput) ToProjectOutputWithContext(ctx context.Context) ProjectOutput

type ProjectSecondaryArtifact 

type ProjectSecondaryArtifact struct {
	// Artifact identifier. Must be the same specified inside the AWS CodeBuild build specification.
	ArtifactIdentifier string `pulumi:"artifactIdentifier"`
	// Specifies the bucket owner's access for objects that another account uploads to their Amazon S3 bucket. By default, only the account that uploads the objects to the bucket has access to these objects. This property allows you to give the bucket owner access to these objects. Valid values are `NONE`, `READ_ONLY`, and `FULL`. your CodeBuild service role must have the `s3:PutBucketAcl` permission. This permission allows CodeBuild to modify the access control list for the bucket.
	BucketOwnerAccess *string `pulumi:"bucketOwnerAccess"`
	// Whether to disable encrypting output artifacts. If `type` is set to `NO_ARTIFACTS`, this value is ignored. Defaults to `false`.
	EncryptionDisabled *bool `pulumi:"encryptionDisabled"`
	// Location of the source code from git or s3.
	Location *string `pulumi:"location"`
	// Name of the project. If `type` is set to `S3`, this is the name of the output artifact object
	Name *string `pulumi:"name"`
	// Namespace to use in storing build artifacts. If `type` is set to `S3`, then valid values are `BUILD_ID` or `NONE`.
	NamespaceType *string `pulumi:"namespaceType"`
	// Whether a name specified in the build specification overrides the artifact name.
	OverrideArtifactName *bool `pulumi:"overrideArtifactName"`
	// Type of build output artifact to create. If `type` is set to `S3`, valid values are `NONE`, `ZIP`
	Packaging *string `pulumi:"packaging"`
	// If `type` is set to `S3`, this is the path to the output artifact.
	Path *string `pulumi:"path"`
	// Type of repository that contains the source code to be built. Valid values: `CODECOMMIT`, `CODEPIPELINE`, `GITHUB`, `GITHUB_ENTERPRISE`, `BITBUCKET`, `S3`, `NO_SOURCE`.
	Type string `pulumi:"type"`
}

type ProjectSecondaryArtifactArgs 

type ProjectSecondaryArtifactArgs struct {
	// Artifact identifier. Must be the same specified inside the AWS CodeBuild build specification.
	ArtifactIdentifier pulumi.StringInput `pulumi:"artifactIdentifier"`
	// Specifies the bucket owner's access for objects that another account uploads to their Amazon S3 bucket. By default, only the account that uploads the objects to the bucket has access to these objects. This property allows you to give the bucket owner access to these objects. Valid values are `NONE`, `READ_ONLY`, and `FULL`. your CodeBuild service role must have the `s3:PutBucketAcl` permission. This permission allows CodeBuild to modify the access control list for the bucket.
	BucketOwnerAccess pulumi.StringPtrInput `pulumi:"bucketOwnerAccess"`
	// Whether to disable encrypting output artifacts. If `type` is set to `NO_ARTIFACTS`, this value is ignored. Defaults to `false`.
	EncryptionDisabled pulumi.BoolPtrInput `pulumi:"encryptionDisabled"`
	// Location of the source code from git or s3.
	Location pulumi.StringPtrInput `pulumi:"location"`
	// Name of the project. If `type` is set to `S3`, this is the name of the output artifact object
	Name pulumi.StringPtrInput `pulumi:"name"`
	// Namespace to use in storing build artifacts. If `type` is set to `S3`, then valid values are `BUILD_ID` or `NONE`.
	NamespaceType pulumi.StringPtrInput `pulumi:"namespaceType"`
	// Whether a name specified in the build specification overrides the artifact name.
	OverrideArtifactName pulumi.BoolPtrInput `pulumi:"overrideArtifactName"`
	// Type of build output artifact to create. If `type` is set to `S3`, valid values are `NONE`, `ZIP`
	Packaging pulumi.StringPtrInput `pulumi:"packaging"`
	// If `type` is set to `S3`, this is the path to the output artifact.
	Path pulumi.StringPtrInput `pulumi:"path"`
	// Type of repository that contains the source code to be built. Valid values: `CODECOMMIT`, `CODEPIPELINE`, `GITHUB`, `GITHUB_ENTERPRISE`, `BITBUCKET`, `S3`, `NO_SOURCE`.
	Type pulumi.StringInput `pulumi:"type"`
}

func (ProjectSecondaryArtifactArgs) ElementType 

func (ProjectSecondaryArtifactArgs) ElementType() reflect.Type

func (ProjectSecondaryArtifactArgs) ToProjectSecondaryArtifactOutput 

func (i ProjectSecondaryArtifactArgs) ToProjectSecondaryArtifactOutput() ProjectSecondaryArtifactOutput

func (ProjectSecondaryArtifactArgs) ToProjectSecondaryArtifactOutputWithContext 

func (i ProjectSecondaryArtifactArgs) ToProjectSecondaryArtifactOutputWithContext(ctx context.Context) ProjectSecondaryArtifactOutput

type ProjectSecondaryArtifactArray 

type ProjectSecondaryArtifactArray []ProjectSecondaryArtifactInput

func (ProjectSecondaryArtifactArray) ElementType 

func (ProjectSecondaryArtifactArray) ElementType() reflect.Type

func (ProjectSecondaryArtifactArray) ToProjectSecondaryArtifactArrayOutput 

func (i ProjectSecondaryArtifactArray) ToProjectSecondaryArtifactArrayOutput() ProjectSecondaryArtifactArrayOutput

func (ProjectSecondaryArtifactArray) ToProjectSecondaryArtifactArrayOutputWithContext 

func (i ProjectSecondaryArtifactArray) ToProjectSecondaryArtifactArrayOutputWithContext(ctx context.Context) ProjectSecondaryArtifactArrayOutput

type ProjectSecondaryArtifactArrayInput 

type ProjectSecondaryArtifactArrayInput interface {
	pulumi.Input

	ToProjectSecondaryArtifactArrayOutput() ProjectSecondaryArtifactArrayOutput
	ToProjectSecondaryArtifactArrayOutputWithContext(context.Context) ProjectSecondaryArtifactArrayOutput
}

ProjectSecondaryArtifactArrayInput is an input type that accepts ProjectSecondaryArtifactArray and ProjectSecondaryArtifactArrayOutput values. You can construct a concrete instance of `ProjectSecondaryArtifactArrayInput` via: 

ProjectSecondaryArtifactArray{ ProjectSecondaryArtifactArgs{...} }

type ProjectSecondaryArtifactArrayOutput 

type ProjectSecondaryArtifactArrayOutput struct{ *pulumi.OutputState }

func (ProjectSecondaryArtifactArrayOutput) ElementType 

func (ProjectSecondaryArtifactArrayOutput) ElementType() reflect.Type

func (ProjectSecondaryArtifactArrayOutput) Index 

func (o ProjectSecondaryArtifactArrayOutput) Index(i pulumi.IntInput) ProjectSecondaryArtifactOutput

func (ProjectSecondaryArtifactArrayOutput) ToProjectSecondaryArtifactArrayOutput 

func (o ProjectSecondaryArtifactArrayOutput) ToProjectSecondaryArtifactArrayOutput() ProjectSecondaryArtifactArrayOutput

func (ProjectSecondaryArtifactArrayOutput) ToProjectSecondaryArtifactArrayOutputWithContext 

func (o ProjectSecondaryArtifactArrayOutput) ToProjectSecondaryArtifactArrayOutputWithContext(ctx context.Context) ProjectSecondaryArtifactArrayOutput

type ProjectSecondaryArtifactInput 

type ProjectSecondaryArtifactInput interface {
	pulumi.Input

	ToProjectSecondaryArtifactOutput() ProjectSecondaryArtifactOutput
	ToProjectSecondaryArtifactOutputWithContext(context.Context) ProjectSecondaryArtifactOutput
}

ProjectSecondaryArtifactInput is an input type that accepts ProjectSecondaryArtifactArgs and ProjectSecondaryArtifactOutput values. You can construct a concrete instance of `ProjectSecondaryArtifactInput` via: 

ProjectSecondaryArtifactArgs{...}

type ProjectSecondaryArtifactOutput 

type ProjectSecondaryArtifactOutput struct{ *pulumi.OutputState }

func (ProjectSecondaryArtifactOutput) ArtifactIdentifier 

func (o ProjectSecondaryArtifactOutput) ArtifactIdentifier() pulumi.StringOutput

Artifact identifier. Must be the same specified inside the AWS CodeBuild build specification.

func (ProjectSecondaryArtifactOutput) BucketOwnerAccess added in v4.34.0 

func (o ProjectSecondaryArtifactOutput) BucketOwnerAccess() pulumi.StringPtrOutput

Specifies the bucket owner's access for objects that another account uploads to their Amazon S3 bucket. By default, only the account that uploads the objects to the bucket has access to these objects. This property allows you to give the bucket owner access to these objects. Valid values are `NONE`, `READ_ONLY`, and `FULL`. your CodeBuild service role must have the `s3:PutBucketAcl` permission. This permission allows CodeBuild to modify the access control list for the bucket.

func (ProjectSecondaryArtifactOutput) ElementType 

func (ProjectSecondaryArtifactOutput) ElementType() reflect.Type

func (ProjectSecondaryArtifactOutput) EncryptionDisabled 

func (o ProjectSecondaryArtifactOutput) EncryptionDisabled() pulumi.BoolPtrOutput

Whether to disable encrypting output artifacts. If `type` is set to `NO_ARTIFACTS`, this value is ignored. Defaults to `false`.

func (ProjectSecondaryArtifactOutput) Location 

func (o ProjectSecondaryArtifactOutput) Location() pulumi.StringPtrOutput

Location of the source code from git or s3.

func (ProjectSecondaryArtifactOutput) Name 

func (o ProjectSecondaryArtifactOutput) Name() pulumi.StringPtrOutput

Name of the project. If `type` is set to `S3`, this is the name of the output artifact object

func (ProjectSecondaryArtifactOutput) NamespaceType 

func (o ProjectSecondaryArtifactOutput) NamespaceType() pulumi.StringPtrOutput

Namespace to use in storing build artifacts. If `type` is set to `S3`, then valid values are `BUILD_ID` or `NONE`.

func (ProjectSecondaryArtifactOutput) OverrideArtifactName 

func (o ProjectSecondaryArtifactOutput) OverrideArtifactName() pulumi.BoolPtrOutput

Whether a name specified in the build specification overrides the artifact name.

func (ProjectSecondaryArtifactOutput) Packaging 

func (o ProjectSecondaryArtifactOutput) Packaging() pulumi.StringPtrOutput

Type of build output artifact to create. If `type` is set to `S3`, valid values are `NONE`, `ZIP`

func (ProjectSecondaryArtifactOutput) Path 

func (o ProjectSecondaryArtifactOutput) Path() pulumi.StringPtrOutput

If `type` is set to `S3`, this is the path to the output artifact.

func (ProjectSecondaryArtifactOutput) ToProjectSecondaryArtifactOutput 

func (o ProjectSecondaryArtifactOutput) ToProjectSecondaryArtifactOutput() ProjectSecondaryArtifactOutput

func (ProjectSecondaryArtifactOutput) ToProjectSecondaryArtifactOutputWithContext 

func (o ProjectSecondaryArtifactOutput) ToProjectSecondaryArtifactOutputWithContext(ctx context.Context) ProjectSecondaryArtifactOutput

func (ProjectSecondaryArtifactOutput) Type 

func (o ProjectSecondaryArtifactOutput) Type() pulumi.StringOutput

Type of repository that contains the source code to be built. Valid values: `CODECOMMIT`, `CODEPIPELINE`, `GITHUB`, `GITHUB_ENTERPRISE`, `BITBUCKET`, `S3`, `NO_SOURCE`.

type ProjectSecondarySource 

type ProjectSecondarySource struct {
	// Configuration block with the authorization settings for AWS CodeBuild to access the source code to be built. This information is for the AWS CodeBuild console's use only. Use the `codebuild.SourceCredential` resource instead. Auth blocks are documented below.
	//
	// Deprecated: Use the aws_codebuild_source_credential resource instead
	Auth *ProjectSecondarySourceAuth `pulumi:"auth"`
	// Contains information that defines how the build project reports the build status to the source provider. This option is only used when the source provider is `GITHUB`, `GITHUB_ENTERPRISE`, or `BITBUCKET`.
	BuildStatusConfig *ProjectSecondarySourceBuildStatusConfig `pulumi:"buildStatusConfig"`
	// Build specification to use for this build project's related builds. This must be set when `type` is `NO_SOURCE`.
	Buildspec *string `pulumi:"buildspec"`
	// Truncate git history to this many commits. Use `0` for a `Full` checkout which you need to run commands like `git branch --show-current`. See [AWS CodePipeline User Guide: Tutorial: Use full clone with a GitHub pipeline source](https://docs.aws.amazon.com/codepipeline/latest/userguide/tutorials-github-gitclone.html) for details.
	GitCloneDepth *int `pulumi:"gitCloneDepth"`
	// Configuration block. Detailed below.
	GitSubmodulesConfig *ProjectSecondarySourceGitSubmodulesConfig `pulumi:"gitSubmodulesConfig"`
	// Ignore SSL warnings when connecting to source control.
	InsecureSsl *bool `pulumi:"insecureSsl"`
	// Location of the source code from git or s3.
	Location *string `pulumi:"location"`
	// Whether to report the status of a build's start and finish to your source provider. This option is only valid when the `type` is `BITBUCKET` or `GITHUB`.
	ReportBuildStatus *bool `pulumi:"reportBuildStatus"`
	// An identifier for a source in the build project.
	SourceIdentifier string `pulumi:"sourceIdentifier"`
	// Type of repository that contains the source code to be built. Valid values: `CODECOMMIT`, `CODEPIPELINE`, `GITHUB`, `GITHUB_ENTERPRISE`, `BITBUCKET`, `S3`, `NO_SOURCE`.
	Type string `pulumi:"type"`
}

type ProjectSecondarySourceArgs 

type ProjectSecondarySourceArgs struct {
	// Configuration block with the authorization settings for AWS CodeBuild to access the source code to be built. This information is for the AWS CodeBuild console's use only. Use the `codebuild.SourceCredential` resource instead. Auth blocks are documented below.
	//
	// Deprecated: Use the aws_codebuild_source_credential resource instead
	Auth ProjectSecondarySourceAuthPtrInput `pulumi:"auth"`
	// Contains information that defines how the build project reports the build status to the source provider. This option is only used when the source provider is `GITHUB`, `GITHUB_ENTERPRISE`, or `BITBUCKET`.
	BuildStatusConfig ProjectSecondarySourceBuildStatusConfigPtrInput `pulumi:"buildStatusConfig"`
	// Build specification to use for this build project's related builds. This must be set when `type` is `NO_SOURCE`.
	Buildspec pulumi.StringPtrInput `pulumi:"buildspec"`
	// Truncate git history to this many commits. Use `0` for a `Full` checkout which you need to run commands like `git branch --show-current`. See [AWS CodePipeline User Guide: Tutorial: Use full clone with a GitHub pipeline source](https://docs.aws.amazon.com/codepipeline/latest/userguide/tutorials-github-gitclone.html) for details.
	GitCloneDepth pulumi.IntPtrInput `pulumi:"gitCloneDepth"`
	// Configuration block. Detailed below.
	GitSubmodulesConfig ProjectSecondarySourceGitSubmodulesConfigPtrInput `pulumi:"gitSubmodulesConfig"`
	// Ignore SSL warnings when connecting to source control.
	InsecureSsl pulumi.BoolPtrInput `pulumi:"insecureSsl"`
	// Location of the source code from git or s3.
	Location pulumi.StringPtrInput `pulumi:"location"`
	// Whether to report the status of a build's start and finish to your source provider. This option is only valid when the `type` is `BITBUCKET` or `GITHUB`.
	ReportBuildStatus pulumi.BoolPtrInput `pulumi:"reportBuildStatus"`
	// An identifier for a source in the build project.
	SourceIdentifier pulumi.StringInput `pulumi:"sourceIdentifier"`
	// Type of repository that contains the source code to be built. Valid values: `CODECOMMIT`, `CODEPIPELINE`, `GITHUB`, `GITHUB_ENTERPRISE`, `BITBUCKET`, `S3`, `NO_SOURCE`.
	Type pulumi.StringInput `pulumi:"type"`
}

func (ProjectSecondarySourceArgs) ElementType 

func (ProjectSecondarySourceArgs) ElementType() reflect.Type

func (ProjectSecondarySourceArgs) ToProjectSecondarySourceOutput 

func (i ProjectSecondarySourceArgs) ToProjectSecondarySourceOutput() ProjectSecondarySourceOutput

func (ProjectSecondarySourceArgs) ToProjectSecondarySourceOutputWithContext 

func (i ProjectSecondarySourceArgs) ToProjectSecondarySourceOutputWithContext(ctx context.Context) ProjectSecondarySourceOutput

type ProjectSecondarySourceArray 

type ProjectSecondarySourceArray []ProjectSecondarySourceInput

func (ProjectSecondarySourceArray) ElementType 

func (ProjectSecondarySourceArray) ElementType() reflect.Type

func (ProjectSecondarySourceArray) ToProjectSecondarySourceArrayOutput 

func (i ProjectSecondarySourceArray) ToProjectSecondarySourceArrayOutput() ProjectSecondarySourceArrayOutput

func (ProjectSecondarySourceArray) ToProjectSecondarySourceArrayOutputWithContext 

func (i ProjectSecondarySourceArray) ToProjectSecondarySourceArrayOutputWithContext(ctx context.Context) ProjectSecondarySourceArrayOutput

type ProjectSecondarySourceArrayInput 

type ProjectSecondarySourceArrayInput interface {
	pulumi.Input

	ToProjectSecondarySourceArrayOutput() ProjectSecondarySourceArrayOutput
	ToProjectSecondarySourceArrayOutputWithContext(context.Context) ProjectSecondarySourceArrayOutput
}

ProjectSecondarySourceArrayInput is an input type that accepts ProjectSecondarySourceArray and ProjectSecondarySourceArrayOutput values. You can construct a concrete instance of `ProjectSecondarySourceArrayInput` via: 

ProjectSecondarySourceArray{ ProjectSecondarySourceArgs{...} }

type ProjectSecondarySourceArrayOutput 

type ProjectSecondarySourceArrayOutput struct{ *pulumi.OutputState }

func (ProjectSecondarySourceArrayOutput) ElementType 

func (ProjectSecondarySourceArrayOutput) ElementType() reflect.Type

func (ProjectSecondarySourceArrayOutput) Index 

func (o ProjectSecondarySourceArrayOutput) Index(i pulumi.IntInput) ProjectSecondarySourceOutput

func (ProjectSecondarySourceArrayOutput) ToProjectSecondarySourceArrayOutput 

func (o ProjectSecondarySourceArrayOutput) ToProjectSecondarySourceArrayOutput() ProjectSecondarySourceArrayOutput

func (ProjectSecondarySourceArrayOutput) ToProjectSecondarySourceArrayOutputWithContext 

func (o ProjectSecondarySourceArrayOutput) ToProjectSecondarySourceArrayOutputWithContext(ctx context.Context) ProjectSecondarySourceArrayOutput

type ProjectSecondarySourceAuth 

type ProjectSecondarySourceAuth struct {
	// Resource value that applies to the specified authorization type. Use the `codebuild.SourceCredential` resource instead.
	//
	// Deprecated: Use the aws_codebuild_source_credential resource instead
	Resource *string `pulumi:"resource"`
	// Type of repository that contains the source code to be built. Valid values: `CODECOMMIT`, `CODEPIPELINE`, `GITHUB`, `GITHUB_ENTERPRISE`, `BITBUCKET`, `S3`, `NO_SOURCE`.
	//
	// Deprecated: Use the aws_codebuild_source_credential resource instead
	Type string `pulumi:"type"`
}

type ProjectSecondarySourceAuthArgs 

type ProjectSecondarySourceAuthArgs struct {
	// Resource value that applies to the specified authorization type. Use the `codebuild.SourceCredential` resource instead.
	//
	// Deprecated: Use the aws_codebuild_source_credential resource instead
	Resource pulumi.StringPtrInput `pulumi:"resource"`
	// Type of repository that contains the source code to be built. Valid values: `CODECOMMIT`, `CODEPIPELINE`, `GITHUB`, `GITHUB_ENTERPRISE`, `BITBUCKET`, `S3`, `NO_SOURCE`.
	//
	// Deprecated: Use the aws_codebuild_source_credential resource instead
	Type pulumi.StringInput `pulumi:"type"`
}

func (ProjectSecondarySourceAuthArgs) ElementType 

func (ProjectSecondarySourceAuthArgs) ElementType() reflect.Type

func (ProjectSecondarySourceAuthArgs) ToProjectSecondarySourceAuthOutput 

func (i ProjectSecondarySourceAuthArgs) ToProjectSecondarySourceAuthOutput() ProjectSecondarySourceAuthOutput

func (ProjectSecondarySourceAuthArgs) ToProjectSecondarySourceAuthOutputWithContext 

func (i ProjectSecondarySourceAuthArgs) ToProjectSecondarySourceAuthOutputWithContext(ctx context.Context) ProjectSecondarySourceAuthOutput

func (ProjectSecondarySourceAuthArgs) ToProjectSecondarySourceAuthPtrOutput 

func (i ProjectSecondarySourceAuthArgs) ToProjectSecondarySourceAuthPtrOutput() ProjectSecondarySourceAuthPtrOutput

func (ProjectSecondarySourceAuthArgs) ToProjectSecondarySourceAuthPtrOutputWithContext 

func (i ProjectSecondarySourceAuthArgs) ToProjectSecondarySourceAuthPtrOutputWithContext(ctx context.Context) ProjectSecondarySourceAuthPtrOutput

type ProjectSecondarySourceAuthInput 

type ProjectSecondarySourceAuthInput interface {
	pulumi.Input

	ToProjectSecondarySourceAuthOutput() ProjectSecondarySourceAuthOutput
	ToProjectSecondarySourceAuthOutputWithContext(context.Context) ProjectSecondarySourceAuthOutput
}

ProjectSecondarySourceAuthInput is an input type that accepts ProjectSecondarySourceAuthArgs and ProjectSecondarySourceAuthOutput values. You can construct a concrete instance of `ProjectSecondarySourceAuthInput` via: 

ProjectSecondarySourceAuthArgs{...}

type ProjectSecondarySourceAuthOutput 

type ProjectSecondarySourceAuthOutput struct{ *pulumi.OutputState }

func (ProjectSecondarySourceAuthOutput) ElementType 

func (ProjectSecondarySourceAuthOutput) ElementType() reflect.Type

func (ProjectSecondarySourceAuthOutput) Resource deprecated 

func (o ProjectSecondarySourceAuthOutput) Resource() pulumi.StringPtrOutput

Resource value that applies to the specified authorization type. Use the `codebuild.SourceCredential` resource instead.

Deprecated: Use the aws_codebuild_source_credential resource instead

func (ProjectSecondarySourceAuthOutput) ToProjectSecondarySourceAuthOutput 

func (o ProjectSecondarySourceAuthOutput) ToProjectSecondarySourceAuthOutput() ProjectSecondarySourceAuthOutput

func (ProjectSecondarySourceAuthOutput) ToProjectSecondarySourceAuthOutputWithContext 

func (o ProjectSecondarySourceAuthOutput) ToProjectSecondarySourceAuthOutputWithContext(ctx context.Context) ProjectSecondarySourceAuthOutput

func (ProjectSecondarySourceAuthOutput) ToProjectSecondarySourceAuthPtrOutput 

func (o ProjectSecondarySourceAuthOutput) ToProjectSecondarySourceAuthPtrOutput() ProjectSecondarySourceAuthPtrOutput

func (ProjectSecondarySourceAuthOutput) ToProjectSecondarySourceAuthPtrOutputWithContext 

func (o ProjectSecondarySourceAuthOutput) ToProjectSecondarySourceAuthPtrOutputWithContext(ctx context.Context) ProjectSecondarySourceAuthPtrOutput

func (ProjectSecondarySourceAuthOutput) Type deprecated 

func (o ProjectSecondarySourceAuthOutput) Type() pulumi.StringOutput

Type of repository that contains the source code to be built. Valid values: `CODECOMMIT`, `CODEPIPELINE`, `GITHUB`, `GITHUB_ENTERPRISE`, `BITBUCKET`, `S3`, `NO_SOURCE`.

Deprecated: Use the aws_codebuild_source_credential resource instead

type ProjectSecondarySourceAuthPtrInput 

type ProjectSecondarySourceAuthPtrInput interface {
	pulumi.Input

	ToProjectSecondarySourceAuthPtrOutput() ProjectSecondarySourceAuthPtrOutput
	ToProjectSecondarySourceAuthPtrOutputWithContext(context.Context) ProjectSecondarySourceAuthPtrOutput
}

ProjectSecondarySourceAuthPtrInput is an input type that accepts ProjectSecondarySourceAuthArgs, ProjectSecondarySourceAuthPtr and ProjectSecondarySourceAuthPtrOutput values. You can construct a concrete instance of `ProjectSecondarySourceAuthPtrInput` via: 

        ProjectSecondarySourceAuthArgs{...}

or:

        nil

func ProjectSecondarySourceAuthPtr 

func ProjectSecondarySourceAuthPtr(v *ProjectSecondarySourceAuthArgs) ProjectSecondarySourceAuthPtrInput

type ProjectSecondarySourceAuthPtrOutput 

type ProjectSecondarySourceAuthPtrOutput struct{ *pulumi.OutputState }

func (ProjectSecondarySourceAuthPtrOutput) Elem 

func (o ProjectSecondarySourceAuthPtrOutput) Elem() ProjectSecondarySourceAuthOutput

func (ProjectSecondarySourceAuthPtrOutput) ElementType 

func (ProjectSecondarySourceAuthPtrOutput) ElementType() reflect.Type

func (ProjectSecondarySourceAuthPtrOutput) Resource deprecated 

func (o ProjectSecondarySourceAuthPtrOutput) Resource() pulumi.StringPtrOutput

Resource value that applies to the specified authorization type. Use the `codebuild.SourceCredential` resource instead.

Deprecated: Use the aws_codebuild_source_credential resource instead

func (ProjectSecondarySourceAuthPtrOutput) ToProjectSecondarySourceAuthPtrOutput 

func (o ProjectSecondarySourceAuthPtrOutput) ToProjectSecondarySourceAuthPtrOutput() ProjectSecondarySourceAuthPtrOutput

func (ProjectSecondarySourceAuthPtrOutput) ToProjectSecondarySourceAuthPtrOutputWithContext 

func (o ProjectSecondarySourceAuthPtrOutput) ToProjectSecondarySourceAuthPtrOutputWithContext(ctx context.Context) ProjectSecondarySourceAuthPtrOutput

func (ProjectSecondarySourceAuthPtrOutput) Type deprecated 

func (o ProjectSecondarySourceAuthPtrOutput) Type() pulumi.StringPtrOutput

Type of repository that contains the source code to be built. Valid values: `CODECOMMIT`, `CODEPIPELINE`, `GITHUB`, `GITHUB_ENTERPRISE`, `BITBUCKET`, `S3`, `NO_SOURCE`.

Deprecated: Use the aws_codebuild_source_credential resource instead

type ProjectSecondarySourceBuildStatusConfig added in v4.2.0 

type ProjectSecondarySourceBuildStatusConfig struct {
	// Specifies the context of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.
	Context *string `pulumi:"context"`
	// Specifies the target url of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.
	TargetUrl *string `pulumi:"targetUrl"`
}

type ProjectSecondarySourceBuildStatusConfigArgs added in v4.2.0 

type ProjectSecondarySourceBuildStatusConfigArgs struct {
	// Specifies the context of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.
	Context pulumi.StringPtrInput `pulumi:"context"`
	// Specifies the target url of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.
	TargetUrl pulumi.StringPtrInput `pulumi:"targetUrl"`
}

func (ProjectSecondarySourceBuildStatusConfigArgs) ElementType added in v4.2.0 

func (ProjectSecondarySourceBuildStatusConfigArgs) ElementType() reflect.Type

func (ProjectSecondarySourceBuildStatusConfigArgs) ToProjectSecondarySourceBuildStatusConfigOutput added in v4.2.0 

func (i ProjectSecondarySourceBuildStatusConfigArgs) ToProjectSecondarySourceBuildStatusConfigOutput() ProjectSecondarySourceBuildStatusConfigOutput

func (ProjectSecondarySourceBuildStatusConfigArgs) ToProjectSecondarySourceBuildStatusConfigOutputWithContext added in v4.2.0 

func (i ProjectSecondarySourceBuildStatusConfigArgs) ToProjectSecondarySourceBuildStatusConfigOutputWithContext(ctx context.Context) ProjectSecondarySourceBuildStatusConfigOutput

func (ProjectSecondarySourceBuildStatusConfigArgs) ToProjectSecondarySourceBuildStatusConfigPtrOutput added in v4.2.0 

func (i ProjectSecondarySourceBuildStatusConfigArgs) ToProjectSecondarySourceBuildStatusConfigPtrOutput() ProjectSecondarySourceBuildStatusConfigPtrOutput

func (ProjectSecondarySourceBuildStatusConfigArgs) ToProjectSecondarySourceBuildStatusConfigPtrOutputWithContext added in v4.2.0 

func (i ProjectSecondarySourceBuildStatusConfigArgs) ToProjectSecondarySourceBuildStatusConfigPtrOutputWithContext(ctx context.Context) ProjectSecondarySourceBuildStatusConfigPtrOutput

type ProjectSecondarySourceBuildStatusConfigInput added in v4.2.0 

type ProjectSecondarySourceBuildStatusConfigInput interface {
	pulumi.Input

	ToProjectSecondarySourceBuildStatusConfigOutput() ProjectSecondarySourceBuildStatusConfigOutput
	ToProjectSecondarySourceBuildStatusConfigOutputWithContext(context.Context) ProjectSecondarySourceBuildStatusConfigOutput
}

ProjectSecondarySourceBuildStatusConfigInput is an input type that accepts ProjectSecondarySourceBuildStatusConfigArgs and ProjectSecondarySourceBuildStatusConfigOutput values. You can construct a concrete instance of `ProjectSecondarySourceBuildStatusConfigInput` via: 

ProjectSecondarySourceBuildStatusConfigArgs{...}

type ProjectSecondarySourceBuildStatusConfigOutput added in v4.2.0 

type ProjectSecondarySourceBuildStatusConfigOutput struct{ *pulumi.OutputState }

func (ProjectSecondarySourceBuildStatusConfigOutput) Context added in v4.2.0 

func (o ProjectSecondarySourceBuildStatusConfigOutput) Context() pulumi.StringPtrOutput

Specifies the context of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.

func (ProjectSecondarySourceBuildStatusConfigOutput) ElementType added in v4.2.0 

func (ProjectSecondarySourceBuildStatusConfigOutput) ElementType() reflect.Type

func (ProjectSecondarySourceBuildStatusConfigOutput) TargetUrl added in v4.2.0 

func (o ProjectSecondarySourceBuildStatusConfigOutput) TargetUrl() pulumi.StringPtrOutput

Specifies the target url of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.

func (ProjectSecondarySourceBuildStatusConfigOutput) ToProjectSecondarySourceBuildStatusConfigOutput added in v4.2.0 

func (o ProjectSecondarySourceBuildStatusConfigOutput) ToProjectSecondarySourceBuildStatusConfigOutput() ProjectSecondarySourceBuildStatusConfigOutput

func (ProjectSecondarySourceBuildStatusConfigOutput) ToProjectSecondarySourceBuildStatusConfigOutputWithContext added in v4.2.0 

func (o ProjectSecondarySourceBuildStatusConfigOutput) ToProjectSecondarySourceBuildStatusConfigOutputWithContext(ctx context.Context) ProjectSecondarySourceBuildStatusConfigOutput

func (ProjectSecondarySourceBuildStatusConfigOutput) ToProjectSecondarySourceBuildStatusConfigPtrOutput added in v4.2.0 

func (o ProjectSecondarySourceBuildStatusConfigOutput) ToProjectSecondarySourceBuildStatusConfigPtrOutput() ProjectSecondarySourceBuildStatusConfigPtrOutput

func (ProjectSecondarySourceBuildStatusConfigOutput) ToProjectSecondarySourceBuildStatusConfigPtrOutputWithContext added in v4.2.0 

func (o ProjectSecondarySourceBuildStatusConfigOutput) ToProjectSecondarySourceBuildStatusConfigPtrOutputWithContext(ctx context.Context) ProjectSecondarySourceBuildStatusConfigPtrOutput

type ProjectSecondarySourceBuildStatusConfigPtrInput added in v4.2.0 

type ProjectSecondarySourceBuildStatusConfigPtrInput interface {
	pulumi.Input

	ToProjectSecondarySourceBuildStatusConfigPtrOutput() ProjectSecondarySourceBuildStatusConfigPtrOutput
	ToProjectSecondarySourceBuildStatusConfigPtrOutputWithContext(context.Context) ProjectSecondarySourceBuildStatusConfigPtrOutput
}

ProjectSecondarySourceBuildStatusConfigPtrInput is an input type that accepts ProjectSecondarySourceBuildStatusConfigArgs, ProjectSecondarySourceBuildStatusConfigPtr and ProjectSecondarySourceBuildStatusConfigPtrOutput values. You can construct a concrete instance of `ProjectSecondarySourceBuildStatusConfigPtrInput` via: 

        ProjectSecondarySourceBuildStatusConfigArgs{...}

or:

        nil

func ProjectSecondarySourceBuildStatusConfigPtr added in v4.2.0 

func ProjectSecondarySourceBuildStatusConfigPtr(v *ProjectSecondarySourceBuildStatusConfigArgs) ProjectSecondarySourceBuildStatusConfigPtrInput

type ProjectSecondarySourceBuildStatusConfigPtrOutput added in v4.2.0 

type ProjectSecondarySourceBuildStatusConfigPtrOutput struct{ *pulumi.OutputState }

func (ProjectSecondarySourceBuildStatusConfigPtrOutput) Context added in v4.2.0 

func (o ProjectSecondarySourceBuildStatusConfigPtrOutput) Context() pulumi.StringPtrOutput

Specifies the context of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.

func (ProjectSecondarySourceBuildStatusConfigPtrOutput) Elem added in v4.2.0 

func (o ProjectSecondarySourceBuildStatusConfigPtrOutput) Elem() ProjectSecondarySourceBuildStatusConfigOutput

func (ProjectSecondarySourceBuildStatusConfigPtrOutput) ElementType added in v4.2.0 

func (ProjectSecondarySourceBuildStatusConfigPtrOutput) ElementType() reflect.Type

func (ProjectSecondarySourceBuildStatusConfigPtrOutput) TargetUrl added in v4.2.0 

func (o ProjectSecondarySourceBuildStatusConfigPtrOutput) TargetUrl() pulumi.StringPtrOutput

Specifies the target url of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.

func (ProjectSecondarySourceBuildStatusConfigPtrOutput) ToProjectSecondarySourceBuildStatusConfigPtrOutput added in v4.2.0 

func (o ProjectSecondarySourceBuildStatusConfigPtrOutput) ToProjectSecondarySourceBuildStatusConfigPtrOutput() ProjectSecondarySourceBuildStatusConfigPtrOutput

func (ProjectSecondarySourceBuildStatusConfigPtrOutput) ToProjectSecondarySourceBuildStatusConfigPtrOutputWithContext added in v4.2.0 

func (o ProjectSecondarySourceBuildStatusConfigPtrOutput) ToProjectSecondarySourceBuildStatusConfigPtrOutputWithContext(ctx context.Context) ProjectSecondarySourceBuildStatusConfigPtrOutput

type ProjectSecondarySourceGitSubmodulesConfig 

type ProjectSecondarySourceGitSubmodulesConfig struct {
	// Whether to fetch Git submodules for the AWS CodeBuild build project.
	FetchSubmodules bool `pulumi:"fetchSubmodules"`
}

type ProjectSecondarySourceGitSubmodulesConfigArgs 

type ProjectSecondarySourceGitSubmodulesConfigArgs struct {
	// Whether to fetch Git submodules for the AWS CodeBuild build project.
	FetchSubmodules pulumi.BoolInput `pulumi:"fetchSubmodules"`
}

func (ProjectSecondarySourceGitSubmodulesConfigArgs) ElementType 

func (ProjectSecondarySourceGitSubmodulesConfigArgs) ElementType() reflect.Type

func (ProjectSecondarySourceGitSubmodulesConfigArgs) ToProjectSecondarySourceGitSubmodulesConfigOutput 

func (i ProjectSecondarySourceGitSubmodulesConfigArgs) ToProjectSecondarySourceGitSubmodulesConfigOutput() ProjectSecondarySourceGitSubmodulesConfigOutput

func (ProjectSecondarySourceGitSubmodulesConfigArgs) ToProjectSecondarySourceGitSubmodulesConfigOutputWithContext 

func (i ProjectSecondarySourceGitSubmodulesConfigArgs) ToProjectSecondarySourceGitSubmodulesConfigOutputWithContext(ctx context.Context) ProjectSecondarySourceGitSubmodulesConfigOutput

func (ProjectSecondarySourceGitSubmodulesConfigArgs) ToProjectSecondarySourceGitSubmodulesConfigPtrOutput 

func (i ProjectSecondarySourceGitSubmodulesConfigArgs) ToProjectSecondarySourceGitSubmodulesConfigPtrOutput() ProjectSecondarySourceGitSubmodulesConfigPtrOutput

func (ProjectSecondarySourceGitSubmodulesConfigArgs) ToProjectSecondarySourceGitSubmodulesConfigPtrOutputWithContext 

func (i ProjectSecondarySourceGitSubmodulesConfigArgs) ToProjectSecondarySourceGitSubmodulesConfigPtrOutputWithContext(ctx context.Context) ProjectSecondarySourceGitSubmodulesConfigPtrOutput

type ProjectSecondarySourceGitSubmodulesConfigInput 

type ProjectSecondarySourceGitSubmodulesConfigInput interface {
	pulumi.Input

	ToProjectSecondarySourceGitSubmodulesConfigOutput() ProjectSecondarySourceGitSubmodulesConfigOutput
	ToProjectSecondarySourceGitSubmodulesConfigOutputWithContext(context.Context) ProjectSecondarySourceGitSubmodulesConfigOutput
}

ProjectSecondarySourceGitSubmodulesConfigInput is an input type that accepts ProjectSecondarySourceGitSubmodulesConfigArgs and ProjectSecondarySourceGitSubmodulesConfigOutput values. You can construct a concrete instance of `ProjectSecondarySourceGitSubmodulesConfigInput` via: 

ProjectSecondarySourceGitSubmodulesConfigArgs{...}

type ProjectSecondarySourceGitSubmodulesConfigOutput 

type ProjectSecondarySourceGitSubmodulesConfigOutput struct{ *pulumi.OutputState }

func (ProjectSecondarySourceGitSubmodulesConfigOutput) ElementType 

func (ProjectSecondarySourceGitSubmodulesConfigOutput) ElementType() reflect.Type

func (ProjectSecondarySourceGitSubmodulesConfigOutput) FetchSubmodules 

func (o ProjectSecondarySourceGitSubmodulesConfigOutput) FetchSubmodules() pulumi.BoolOutput

Whether to fetch Git submodules for the AWS CodeBuild build project.

func (ProjectSecondarySourceGitSubmodulesConfigOutput) ToProjectSecondarySourceGitSubmodulesConfigOutput 

func (o ProjectSecondarySourceGitSubmodulesConfigOutput) ToProjectSecondarySourceGitSubmodulesConfigOutput() ProjectSecondarySourceGitSubmodulesConfigOutput

func (ProjectSecondarySourceGitSubmodulesConfigOutput) ToProjectSecondarySourceGitSubmodulesConfigOutputWithContext 

func (o ProjectSecondarySourceGitSubmodulesConfigOutput) ToProjectSecondarySourceGitSubmodulesConfigOutputWithContext(ctx context.Context) ProjectSecondarySourceGitSubmodulesConfigOutput

func (ProjectSecondarySourceGitSubmodulesConfigOutput) ToProjectSecondarySourceGitSubmodulesConfigPtrOutput 

func (o ProjectSecondarySourceGitSubmodulesConfigOutput) ToProjectSecondarySourceGitSubmodulesConfigPtrOutput() ProjectSecondarySourceGitSubmodulesConfigPtrOutput

func (ProjectSecondarySourceGitSubmodulesConfigOutput) ToProjectSecondarySourceGitSubmodulesConfigPtrOutputWithContext 

func (o ProjectSecondarySourceGitSubmodulesConfigOutput) ToProjectSecondarySourceGitSubmodulesConfigPtrOutputWithContext(ctx context.Context) ProjectSecondarySourceGitSubmodulesConfigPtrOutput

type ProjectSecondarySourceGitSubmodulesConfigPtrInput 

type ProjectSecondarySourceGitSubmodulesConfigPtrInput interface {
	pulumi.Input

	ToProjectSecondarySourceGitSubmodulesConfigPtrOutput() ProjectSecondarySourceGitSubmodulesConfigPtrOutput
	ToProjectSecondarySourceGitSubmodulesConfigPtrOutputWithContext(context.Context) ProjectSecondarySourceGitSubmodulesConfigPtrOutput
}

ProjectSecondarySourceGitSubmodulesConfigPtrInput is an input type that accepts ProjectSecondarySourceGitSubmodulesConfigArgs, ProjectSecondarySourceGitSubmodulesConfigPtr and ProjectSecondarySourceGitSubmodulesConfigPtrOutput values. You can construct a concrete instance of `ProjectSecondarySourceGitSubmodulesConfigPtrInput` via: 

        ProjectSecondarySourceGitSubmodulesConfigArgs{...}

or:

        nil

func ProjectSecondarySourceGitSubmodulesConfigPtr 

func ProjectSecondarySourceGitSubmodulesConfigPtr(v *ProjectSecondarySourceGitSubmodulesConfigArgs) ProjectSecondarySourceGitSubmodulesConfigPtrInput

type ProjectSecondarySourceGitSubmodulesConfigPtrOutput 

type ProjectSecondarySourceGitSubmodulesConfigPtrOutput struct{ *pulumi.OutputState }

func (ProjectSecondarySourceGitSubmodulesConfigPtrOutput) Elem 

func (o ProjectSecondarySourceGitSubmodulesConfigPtrOutput) Elem() ProjectSecondarySourceGitSubmodulesConfigOutput

func (ProjectSecondarySourceGitSubmodulesConfigPtrOutput) ElementType 

func (ProjectSecondarySourceGitSubmodulesConfigPtrOutput) ElementType() reflect.Type

func (ProjectSecondarySourceGitSubmodulesConfigPtrOutput) FetchSubmodules 

func (o ProjectSecondarySourceGitSubmodulesConfigPtrOutput) FetchSubmodules() pulumi.BoolPtrOutput

Whether to fetch Git submodules for the AWS CodeBuild build project.

func (ProjectSecondarySourceGitSubmodulesConfigPtrOutput) ToProjectSecondarySourceGitSubmodulesConfigPtrOutput 

func (o ProjectSecondarySourceGitSubmodulesConfigPtrOutput) ToProjectSecondarySourceGitSubmodulesConfigPtrOutput() ProjectSecondarySourceGitSubmodulesConfigPtrOutput

func (ProjectSecondarySourceGitSubmodulesConfigPtrOutput) ToProjectSecondarySourceGitSubmodulesConfigPtrOutputWithContext 

func (o ProjectSecondarySourceGitSubmodulesConfigPtrOutput) ToProjectSecondarySourceGitSubmodulesConfigPtrOutputWithContext(ctx context.Context) ProjectSecondarySourceGitSubmodulesConfigPtrOutput

type ProjectSecondarySourceInput 

type ProjectSecondarySourceInput interface {
	pulumi.Input

	ToProjectSecondarySourceOutput() ProjectSecondarySourceOutput
	ToProjectSecondarySourceOutputWithContext(context.Context) ProjectSecondarySourceOutput
}

ProjectSecondarySourceInput is an input type that accepts ProjectSecondarySourceArgs and ProjectSecondarySourceOutput values. You can construct a concrete instance of `ProjectSecondarySourceInput` via: 

ProjectSecondarySourceArgs{...}

type ProjectSecondarySourceOutput 

type ProjectSecondarySourceOutput struct{ *pulumi.OutputState }

func (ProjectSecondarySourceOutput) Auth deprecated 

func (o ProjectSecondarySourceOutput) Auth() ProjectSecondarySourceAuthPtrOutput

Configuration block with the authorization settings for AWS CodeBuild to access the source code to be built. This information is for the AWS CodeBuild console's use only. Use the `codebuild.SourceCredential` resource instead. Auth blocks are documented below.

Deprecated: Use the aws_codebuild_source_credential resource instead

func (ProjectSecondarySourceOutput) BuildStatusConfig added in v4.2.0 

func (o ProjectSecondarySourceOutput) BuildStatusConfig() ProjectSecondarySourceBuildStatusConfigPtrOutput

Contains information that defines how the build project reports the build status to the source provider. This option is only used when the source provider is `GITHUB`, `GITHUB_ENTERPRISE`, or `BITBUCKET`.

func (ProjectSecondarySourceOutput) Buildspec 

func (o ProjectSecondarySourceOutput) Buildspec() pulumi.StringPtrOutput

Build specification to use for this build project's related builds. This must be set when `type` is `NO_SOURCE`.

func (ProjectSecondarySourceOutput) ElementType 

func (ProjectSecondarySourceOutput) ElementType() reflect.Type

func (ProjectSecondarySourceOutput) GitCloneDepth 

func (o ProjectSecondarySourceOutput) GitCloneDepth() pulumi.IntPtrOutput

Truncate git history to this many commits. Use `0` for a `Full` checkout which you need to run commands like `git branch --show-current`. See [AWS CodePipeline User Guide: Tutorial: Use full clone with a GitHub pipeline source](https://docs.aws.amazon.com/codepipeline/latest/userguide/tutorials-github-gitclone.html) for details.

func (ProjectSecondarySourceOutput) GitSubmodulesConfig 

func (o ProjectSecondarySourceOutput) GitSubmodulesConfig() ProjectSecondarySourceGitSubmodulesConfigPtrOutput

Configuration block. Detailed below.

func (ProjectSecondarySourceOutput) InsecureSsl 

func (o ProjectSecondarySourceOutput) InsecureSsl() pulumi.BoolPtrOutput

Ignore SSL warnings when connecting to source control.

func (ProjectSecondarySourceOutput) Location 

func (o ProjectSecondarySourceOutput) Location() pulumi.StringPtrOutput

Location of the source code from git or s3.

func (ProjectSecondarySourceOutput) ReportBuildStatus 

func (o ProjectSecondarySourceOutput) ReportBuildStatus() pulumi.BoolPtrOutput

Whether to report the status of a build's start and finish to your source provider. This option is only valid when the `type` is `BITBUCKET` or `GITHUB`.

func (ProjectSecondarySourceOutput) SourceIdentifier 

func (o ProjectSecondarySourceOutput) SourceIdentifier() pulumi.StringOutput

An identifier for a source in the build project.

func (ProjectSecondarySourceOutput) ToProjectSecondarySourceOutput 

func (o ProjectSecondarySourceOutput) ToProjectSecondarySourceOutput() ProjectSecondarySourceOutput

func (ProjectSecondarySourceOutput) ToProjectSecondarySourceOutputWithContext 

func (o ProjectSecondarySourceOutput) ToProjectSecondarySourceOutputWithContext(ctx context.Context) ProjectSecondarySourceOutput

func (ProjectSecondarySourceOutput) Type 

func (o ProjectSecondarySourceOutput) Type() pulumi.StringOutput

Type of repository that contains the source code to be built. Valid values: `CODECOMMIT`, `CODEPIPELINE`, `GITHUB`, `GITHUB_ENTERPRISE`, `BITBUCKET`, `S3`, `NO_SOURCE`.

type ProjectSecondarySourceVersion added in v4.34.0 

type ProjectSecondarySourceVersion struct {
	// An identifier for a source in the build project.
	SourceIdentifier string `pulumi:"sourceIdentifier"`
	// The source version for the corresponding source identifier. See [AWS docs](https://docs.aws.amazon.com/codebuild/latest/APIReference/API_ProjectSourceVersion.html#CodeBuild-Type-ProjectSourceVersion-sourceVersion) for more details.
	SourceVersion string `pulumi:"sourceVersion"`
}

type ProjectSecondarySourceVersionArgs added in v4.34.0 

type ProjectSecondarySourceVersionArgs struct {
	// An identifier for a source in the build project.
	SourceIdentifier pulumi.StringInput `pulumi:"sourceIdentifier"`
	// The source version for the corresponding source identifier. See [AWS docs](https://docs.aws.amazon.com/codebuild/latest/APIReference/API_ProjectSourceVersion.html#CodeBuild-Type-ProjectSourceVersion-sourceVersion) for more details.
	SourceVersion pulumi.StringInput `pulumi:"sourceVersion"`
}

func (ProjectSecondarySourceVersionArgs) ElementType added in v4.34.0 

func (ProjectSecondarySourceVersionArgs) ElementType() reflect.Type

func (ProjectSecondarySourceVersionArgs) ToProjectSecondarySourceVersionOutput added in v4.34.0 

func (i ProjectSecondarySourceVersionArgs) ToProjectSecondarySourceVersionOutput() ProjectSecondarySourceVersionOutput

func (ProjectSecondarySourceVersionArgs) ToProjectSecondarySourceVersionOutputWithContext added in v4.34.0 

func (i ProjectSecondarySourceVersionArgs) ToProjectSecondarySourceVersionOutputWithContext(ctx context.Context) ProjectSecondarySourceVersionOutput

type ProjectSecondarySourceVersionArray added in v4.34.0 

type ProjectSecondarySourceVersionArray []ProjectSecondarySourceVersionInput

func (ProjectSecondarySourceVersionArray) ElementType added in v4.34.0 

func (ProjectSecondarySourceVersionArray) ElementType() reflect.Type

func (ProjectSecondarySourceVersionArray) ToProjectSecondarySourceVersionArrayOutput added in v4.34.0 

func (i ProjectSecondarySourceVersionArray) ToProjectSecondarySourceVersionArrayOutput() ProjectSecondarySourceVersionArrayOutput

func (ProjectSecondarySourceVersionArray) ToProjectSecondarySourceVersionArrayOutputWithContext added in v4.34.0 

func (i ProjectSecondarySourceVersionArray) ToProjectSecondarySourceVersionArrayOutputWithContext(ctx context.Context) ProjectSecondarySourceVersionArrayOutput

type ProjectSecondarySourceVersionArrayInput added in v4.34.0 

type ProjectSecondarySourceVersionArrayInput interface {
	pulumi.Input

	ToProjectSecondarySourceVersionArrayOutput() ProjectSecondarySourceVersionArrayOutput
	ToProjectSecondarySourceVersionArrayOutputWithContext(context.Context) ProjectSecondarySourceVersionArrayOutput
}

ProjectSecondarySourceVersionArrayInput is an input type that accepts ProjectSecondarySourceVersionArray and ProjectSecondarySourceVersionArrayOutput values. You can construct a concrete instance of `ProjectSecondarySourceVersionArrayInput` via: 

ProjectSecondarySourceVersionArray{ ProjectSecondarySourceVersionArgs{...} }

type ProjectSecondarySourceVersionArrayOutput added in v4.34.0 

type ProjectSecondarySourceVersionArrayOutput struct{ *pulumi.OutputState }

func (ProjectSecondarySourceVersionArrayOutput) ElementType added in v4.34.0 

func (ProjectSecondarySourceVersionArrayOutput) ElementType() reflect.Type

func (ProjectSecondarySourceVersionArrayOutput) Index added in v4.34.0 

func (o ProjectSecondarySourceVersionArrayOutput) Index(i pulumi.IntInput) ProjectSecondarySourceVersionOutput

func (ProjectSecondarySourceVersionArrayOutput) ToProjectSecondarySourceVersionArrayOutput added in v4.34.0 

func (o ProjectSecondarySourceVersionArrayOutput) ToProjectSecondarySourceVersionArrayOutput() ProjectSecondarySourceVersionArrayOutput

func (ProjectSecondarySourceVersionArrayOutput) ToProjectSecondarySourceVersionArrayOutputWithContext added in v4.34.0 

func (o ProjectSecondarySourceVersionArrayOutput) ToProjectSecondarySourceVersionArrayOutputWithContext(ctx context.Context) ProjectSecondarySourceVersionArrayOutput

type ProjectSecondarySourceVersionInput added in v4.34.0 

type ProjectSecondarySourceVersionInput interface {
	pulumi.Input

	ToProjectSecondarySourceVersionOutput() ProjectSecondarySourceVersionOutput
	ToProjectSecondarySourceVersionOutputWithContext(context.Context) ProjectSecondarySourceVersionOutput
}

ProjectSecondarySourceVersionInput is an input type that accepts ProjectSecondarySourceVersionArgs and ProjectSecondarySourceVersionOutput values. You can construct a concrete instance of `ProjectSecondarySourceVersionInput` via: 

ProjectSecondarySourceVersionArgs{...}

type ProjectSecondarySourceVersionOutput added in v4.34.0 

type ProjectSecondarySourceVersionOutput struct{ *pulumi.OutputState }

func (ProjectSecondarySourceVersionOutput) ElementType added in v4.34.0 

func (ProjectSecondarySourceVersionOutput) ElementType() reflect.Type

func (ProjectSecondarySourceVersionOutput) SourceIdentifier added in v4.34.0 

func (o ProjectSecondarySourceVersionOutput) SourceIdentifier() pulumi.StringOutput

An identifier for a source in the build project.

func (ProjectSecondarySourceVersionOutput) SourceVersion added in v4.34.0 

func (o ProjectSecondarySourceVersionOutput) SourceVersion() pulumi.StringOutput

The source version for the corresponding source identifier. See [AWS docs](https://docs.aws.amazon.com/codebuild/latest/APIReference/API_ProjectSourceVersion.html#CodeBuild-Type-ProjectSourceVersion-sourceVersion) for more details.

func (ProjectSecondarySourceVersionOutput) ToProjectSecondarySourceVersionOutput added in v4.34.0 

func (o ProjectSecondarySourceVersionOutput) ToProjectSecondarySourceVersionOutput() ProjectSecondarySourceVersionOutput

func (ProjectSecondarySourceVersionOutput) ToProjectSecondarySourceVersionOutputWithContext added in v4.34.0 

func (o ProjectSecondarySourceVersionOutput) ToProjectSecondarySourceVersionOutputWithContext(ctx context.Context) ProjectSecondarySourceVersionOutput

type ProjectSource 

type ProjectSource struct {
	// Configuration block with the authorization settings for AWS CodeBuild to access the source code to be built. This information is for the AWS CodeBuild console's use only. Use the `codebuild.SourceCredential` resource instead. Auth blocks are documented below.
	//
	// Deprecated: Use the aws_codebuild_source_credential resource instead
	Auth *ProjectSourceAuth `pulumi:"auth"`
	// Contains information that defines how the build project reports the build status to the source provider. This option is only used when the source provider is `GITHUB`, `GITHUB_ENTERPRISE`, or `BITBUCKET`.
	BuildStatusConfig *ProjectSourceBuildStatusConfig `pulumi:"buildStatusConfig"`
	// Build specification to use for this build project's related builds. This must be set when `type` is `NO_SOURCE`.
	Buildspec *string `pulumi:"buildspec"`
	// Truncate git history to this many commits. Use `0` for a `Full` checkout which you need to run commands like `git branch --show-current`. See [AWS CodePipeline User Guide: Tutorial: Use full clone with a GitHub pipeline source](https://docs.aws.amazon.com/codepipeline/latest/userguide/tutorials-github-gitclone.html) for details.
	GitCloneDepth *int `pulumi:"gitCloneDepth"`
	// Configuration block. Detailed below.
	GitSubmodulesConfig *ProjectSourceGitSubmodulesConfig `pulumi:"gitSubmodulesConfig"`
	// Ignore SSL warnings when connecting to source control.
	InsecureSsl *bool `pulumi:"insecureSsl"`
	// Location of the source code from git or s3.
	Location *string `pulumi:"location"`
	// Whether to report the status of a build's start and finish to your source provider. This option is only valid when the `type` is `BITBUCKET` or `GITHUB`.
	ReportBuildStatus *bool `pulumi:"reportBuildStatus"`
	// Type of repository that contains the source code to be built. Valid values: `CODECOMMIT`, `CODEPIPELINE`, `GITHUB`, `GITHUB_ENTERPRISE`, `BITBUCKET`, `S3`, `NO_SOURCE`.
	Type string `pulumi:"type"`
}

type ProjectSourceArgs 

type ProjectSourceArgs struct {
	// Configuration block with the authorization settings for AWS CodeBuild to access the source code to be built. This information is for the AWS CodeBuild console's use only. Use the `codebuild.SourceCredential` resource instead. Auth blocks are documented below.
	//
	// Deprecated: Use the aws_codebuild_source_credential resource instead
	Auth ProjectSourceAuthPtrInput `pulumi:"auth"`
	// Contains information that defines how the build project reports the build status to the source provider. This option is only used when the source provider is `GITHUB`, `GITHUB_ENTERPRISE`, or `BITBUCKET`.
	BuildStatusConfig ProjectSourceBuildStatusConfigPtrInput `pulumi:"buildStatusConfig"`
	// Build specification to use for this build project's related builds. This must be set when `type` is `NO_SOURCE`.
	Buildspec pulumi.StringPtrInput `pulumi:"buildspec"`
	// Truncate git history to this many commits. Use `0` for a `Full` checkout which you need to run commands like `git branch --show-current`. See [AWS CodePipeline User Guide: Tutorial: Use full clone with a GitHub pipeline source](https://docs.aws.amazon.com/codepipeline/latest/userguide/tutorials-github-gitclone.html) for details.
	GitCloneDepth pulumi.IntPtrInput `pulumi:"gitCloneDepth"`
	// Configuration block. Detailed below.
	GitSubmodulesConfig ProjectSourceGitSubmodulesConfigPtrInput `pulumi:"gitSubmodulesConfig"`
	// Ignore SSL warnings when connecting to source control.
	InsecureSsl pulumi.BoolPtrInput `pulumi:"insecureSsl"`
	// Location of the source code from git or s3.
	Location pulumi.StringPtrInput `pulumi:"location"`
	// Whether to report the status of a build's start and finish to your source provider. This option is only valid when the `type` is `BITBUCKET` or `GITHUB`.
	ReportBuildStatus pulumi.BoolPtrInput `pulumi:"reportBuildStatus"`
	// Type of repository that contains the source code to be built. Valid values: `CODECOMMIT`, `CODEPIPELINE`, `GITHUB`, `GITHUB_ENTERPRISE`, `BITBUCKET`, `S3`, `NO_SOURCE`.
	Type pulumi.StringInput `pulumi:"type"`
}

func (ProjectSourceArgs) ElementType 

func (ProjectSourceArgs) ElementType() reflect.Type

func (ProjectSourceArgs) ToProjectSourceOutput 

func (i ProjectSourceArgs) ToProjectSourceOutput() ProjectSourceOutput

func (ProjectSourceArgs) ToProjectSourceOutputWithContext 

func (i ProjectSourceArgs) ToProjectSourceOutputWithContext(ctx context.Context) ProjectSourceOutput

func (ProjectSourceArgs) ToProjectSourcePtrOutput 

func (i ProjectSourceArgs) ToProjectSourcePtrOutput() ProjectSourcePtrOutput

func (ProjectSourceArgs) ToProjectSourcePtrOutputWithContext 

func (i ProjectSourceArgs) ToProjectSourcePtrOutputWithContext(ctx context.Context) ProjectSourcePtrOutput

type ProjectSourceAuth 

type ProjectSourceAuth struct {
	// Resource value that applies to the specified authorization type. Use the `codebuild.SourceCredential` resource instead.
	//
	// Deprecated: Use the aws_codebuild_source_credential resource instead
	Resource *string `pulumi:"resource"`
	// Type of repository that contains the source code to be built. Valid values: `CODECOMMIT`, `CODEPIPELINE`, `GITHUB`, `GITHUB_ENTERPRISE`, `BITBUCKET`, `S3`, `NO_SOURCE`.
	//
	// Deprecated: Use the aws_codebuild_source_credential resource instead
	Type string `pulumi:"type"`
}

type ProjectSourceAuthArgs 

type ProjectSourceAuthArgs struct {
	// Resource value that applies to the specified authorization type. Use the `codebuild.SourceCredential` resource instead.
	//
	// Deprecated: Use the aws_codebuild_source_credential resource instead
	Resource pulumi.StringPtrInput `pulumi:"resource"`
	// Type of repository that contains the source code to be built. Valid values: `CODECOMMIT`, `CODEPIPELINE`, `GITHUB`, `GITHUB_ENTERPRISE`, `BITBUCKET`, `S3`, `NO_SOURCE`.
	//
	// Deprecated: Use the aws_codebuild_source_credential resource instead
	Type pulumi.StringInput `pulumi:"type"`
}

func (ProjectSourceAuthArgs) ElementType 

func (ProjectSourceAuthArgs) ElementType() reflect.Type

func (ProjectSourceAuthArgs) ToProjectSourceAuthOutput 

func (i ProjectSourceAuthArgs) ToProjectSourceAuthOutput() ProjectSourceAuthOutput

func (ProjectSourceAuthArgs) ToProjectSourceAuthOutputWithContext 

func (i ProjectSourceAuthArgs) ToProjectSourceAuthOutputWithContext(ctx context.Context) ProjectSourceAuthOutput

func (ProjectSourceAuthArgs) ToProjectSourceAuthPtrOutput 

func (i ProjectSourceAuthArgs) ToProjectSourceAuthPtrOutput() ProjectSourceAuthPtrOutput

func (ProjectSourceAuthArgs) ToProjectSourceAuthPtrOutputWithContext 

func (i ProjectSourceAuthArgs) ToProjectSourceAuthPtrOutputWithContext(ctx context.Context) ProjectSourceAuthPtrOutput

type ProjectSourceAuthInput 

type ProjectSourceAuthInput interface {
	pulumi.Input

	ToProjectSourceAuthOutput() ProjectSourceAuthOutput
	ToProjectSourceAuthOutputWithContext(context.Context) ProjectSourceAuthOutput
}

ProjectSourceAuthInput is an input type that accepts ProjectSourceAuthArgs and ProjectSourceAuthOutput values. You can construct a concrete instance of `ProjectSourceAuthInput` via: 

ProjectSourceAuthArgs{...}

type ProjectSourceAuthOutput 

type ProjectSourceAuthOutput struct{ *pulumi.OutputState }

func (ProjectSourceAuthOutput) ElementType 

func (ProjectSourceAuthOutput) ElementType() reflect.Type

func (ProjectSourceAuthOutput) Resource deprecated 

func (o ProjectSourceAuthOutput) Resource() pulumi.StringPtrOutput

Resource value that applies to the specified authorization type. Use the `codebuild.SourceCredential` resource instead.

Deprecated: Use the aws_codebuild_source_credential resource instead

func (ProjectSourceAuthOutput) ToProjectSourceAuthOutput 

func (o ProjectSourceAuthOutput) ToProjectSourceAuthOutput() ProjectSourceAuthOutput

func (ProjectSourceAuthOutput) ToProjectSourceAuthOutputWithContext 

func (o ProjectSourceAuthOutput) ToProjectSourceAuthOutputWithContext(ctx context.Context) ProjectSourceAuthOutput

func (ProjectSourceAuthOutput) ToProjectSourceAuthPtrOutput 

func (o ProjectSourceAuthOutput) ToProjectSourceAuthPtrOutput() ProjectSourceAuthPtrOutput

func (ProjectSourceAuthOutput) ToProjectSourceAuthPtrOutputWithContext 

func (o ProjectSourceAuthOutput) ToProjectSourceAuthPtrOutputWithContext(ctx context.Context) ProjectSourceAuthPtrOutput

func (ProjectSourceAuthOutput) Type deprecated 

func (o ProjectSourceAuthOutput) Type() pulumi.StringOutput

Type of repository that contains the source code to be built. Valid values: `CODECOMMIT`, `CODEPIPELINE`, `GITHUB`, `GITHUB_ENTERPRISE`, `BITBUCKET`, `S3`, `NO_SOURCE`.

Deprecated: Use the aws_codebuild_source_credential resource instead

type ProjectSourceAuthPtrInput 

type ProjectSourceAuthPtrInput interface {
	pulumi.Input

	ToProjectSourceAuthPtrOutput() ProjectSourceAuthPtrOutput
	ToProjectSourceAuthPtrOutputWithContext(context.Context) ProjectSourceAuthPtrOutput
}

ProjectSourceAuthPtrInput is an input type that accepts ProjectSourceAuthArgs, ProjectSourceAuthPtr and ProjectSourceAuthPtrOutput values. You can construct a concrete instance of `ProjectSourceAuthPtrInput` via: 

        ProjectSourceAuthArgs{...}

or:

        nil

func ProjectSourceAuthPtr 

func ProjectSourceAuthPtr(v *ProjectSourceAuthArgs) ProjectSourceAuthPtrInput

type ProjectSourceAuthPtrOutput 

type ProjectSourceAuthPtrOutput struct{ *pulumi.OutputState }

func (ProjectSourceAuthPtrOutput) Elem 

func (o ProjectSourceAuthPtrOutput) Elem() ProjectSourceAuthOutput

func (ProjectSourceAuthPtrOutput) ElementType 

func (ProjectSourceAuthPtrOutput) ElementType() reflect.Type

func (ProjectSourceAuthPtrOutput) Resource deprecated 

func (o ProjectSourceAuthPtrOutput) Resource() pulumi.StringPtrOutput

Resource value that applies to the specified authorization type. Use the `codebuild.SourceCredential` resource instead.

Deprecated: Use the aws_codebuild_source_credential resource instead

func (ProjectSourceAuthPtrOutput) ToProjectSourceAuthPtrOutput 

func (o ProjectSourceAuthPtrOutput) ToProjectSourceAuthPtrOutput() ProjectSourceAuthPtrOutput

func (ProjectSourceAuthPtrOutput) ToProjectSourceAuthPtrOutputWithContext 

func (o ProjectSourceAuthPtrOutput) ToProjectSourceAuthPtrOutputWithContext(ctx context.Context) ProjectSourceAuthPtrOutput

func (ProjectSourceAuthPtrOutput) Type deprecated 

func (o ProjectSourceAuthPtrOutput) Type() pulumi.StringPtrOutput

Type of repository that contains the source code to be built. Valid values: `CODECOMMIT`, `CODEPIPELINE`, `GITHUB`, `GITHUB_ENTERPRISE`, `BITBUCKET`, `S3`, `NO_SOURCE`.

Deprecated: Use the aws_codebuild_source_credential resource instead

type ProjectSourceBuildStatusConfig added in v4.2.0 

type ProjectSourceBuildStatusConfig struct {
	// Specifies the context of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.
	Context *string `pulumi:"context"`
	// Specifies the target url of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.
	TargetUrl *string `pulumi:"targetUrl"`
}

type ProjectSourceBuildStatusConfigArgs added in v4.2.0 

type ProjectSourceBuildStatusConfigArgs struct {
	// Specifies the context of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.
	Context pulumi.StringPtrInput `pulumi:"context"`
	// Specifies the target url of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.
	TargetUrl pulumi.StringPtrInput `pulumi:"targetUrl"`
}

func (ProjectSourceBuildStatusConfigArgs) ElementType added in v4.2.0 

func (ProjectSourceBuildStatusConfigArgs) ElementType() reflect.Type

func (ProjectSourceBuildStatusConfigArgs) ToProjectSourceBuildStatusConfigOutput added in v4.2.0 

func (i ProjectSourceBuildStatusConfigArgs) ToProjectSourceBuildStatusConfigOutput() ProjectSourceBuildStatusConfigOutput

func (ProjectSourceBuildStatusConfigArgs) ToProjectSourceBuildStatusConfigOutputWithContext added in v4.2.0 

func (i ProjectSourceBuildStatusConfigArgs) ToProjectSourceBuildStatusConfigOutputWithContext(ctx context.Context) ProjectSourceBuildStatusConfigOutput

func (ProjectSourceBuildStatusConfigArgs) ToProjectSourceBuildStatusConfigPtrOutput added in v4.2.0 

func (i ProjectSourceBuildStatusConfigArgs) ToProjectSourceBuildStatusConfigPtrOutput() ProjectSourceBuildStatusConfigPtrOutput

func (ProjectSourceBuildStatusConfigArgs) ToProjectSourceBuildStatusConfigPtrOutputWithContext added in v4.2.0 

func (i ProjectSourceBuildStatusConfigArgs) ToProjectSourceBuildStatusConfigPtrOutputWithContext(ctx context.Context) ProjectSourceBuildStatusConfigPtrOutput

type ProjectSourceBuildStatusConfigInput added in v4.2.0 

type ProjectSourceBuildStatusConfigInput interface {
	pulumi.Input

	ToProjectSourceBuildStatusConfigOutput() ProjectSourceBuildStatusConfigOutput
	ToProjectSourceBuildStatusConfigOutputWithContext(context.Context) ProjectSourceBuildStatusConfigOutput
}

ProjectSourceBuildStatusConfigInput is an input type that accepts ProjectSourceBuildStatusConfigArgs and ProjectSourceBuildStatusConfigOutput values. You can construct a concrete instance of `ProjectSourceBuildStatusConfigInput` via: 

ProjectSourceBuildStatusConfigArgs{...}

type ProjectSourceBuildStatusConfigOutput added in v4.2.0 

type ProjectSourceBuildStatusConfigOutput struct{ *pulumi.OutputState }

func (ProjectSourceBuildStatusConfigOutput) Context added in v4.2.0 

func (o ProjectSourceBuildStatusConfigOutput) Context() pulumi.StringPtrOutput

Specifies the context of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.

func (ProjectSourceBuildStatusConfigOutput) ElementType added in v4.2.0 

func (ProjectSourceBuildStatusConfigOutput) ElementType() reflect.Type

func (ProjectSourceBuildStatusConfigOutput) TargetUrl added in v4.2.0 

func (o ProjectSourceBuildStatusConfigOutput) TargetUrl() pulumi.StringPtrOutput

Specifies the target url of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.

func (ProjectSourceBuildStatusConfigOutput) ToProjectSourceBuildStatusConfigOutput added in v4.2.0 

func (o ProjectSourceBuildStatusConfigOutput) ToProjectSourceBuildStatusConfigOutput() ProjectSourceBuildStatusConfigOutput

func (ProjectSourceBuildStatusConfigOutput) ToProjectSourceBuildStatusConfigOutputWithContext added in v4.2.0 

func (o ProjectSourceBuildStatusConfigOutput) ToProjectSourceBuildStatusConfigOutputWithContext(ctx context.Context) ProjectSourceBuildStatusConfigOutput

func (ProjectSourceBuildStatusConfigOutput) ToProjectSourceBuildStatusConfigPtrOutput added in v4.2.0 

func (o ProjectSourceBuildStatusConfigOutput) ToProjectSourceBuildStatusConfigPtrOutput() ProjectSourceBuildStatusConfigPtrOutput

func (ProjectSourceBuildStatusConfigOutput) ToProjectSourceBuildStatusConfigPtrOutputWithContext added in v4.2.0 

func (o ProjectSourceBuildStatusConfigOutput) ToProjectSourceBuildStatusConfigPtrOutputWithContext(ctx context.Context) ProjectSourceBuildStatusConfigPtrOutput

type ProjectSourceBuildStatusConfigPtrInput added in v4.2.0 

type ProjectSourceBuildStatusConfigPtrInput interface {
	pulumi.Input

	ToProjectSourceBuildStatusConfigPtrOutput() ProjectSourceBuildStatusConfigPtrOutput
	ToProjectSourceBuildStatusConfigPtrOutputWithContext(context.Context) ProjectSourceBuildStatusConfigPtrOutput
}

ProjectSourceBuildStatusConfigPtrInput is an input type that accepts ProjectSourceBuildStatusConfigArgs, ProjectSourceBuildStatusConfigPtr and ProjectSourceBuildStatusConfigPtrOutput values. You can construct a concrete instance of `ProjectSourceBuildStatusConfigPtrInput` via: 

        ProjectSourceBuildStatusConfigArgs{...}

or:

        nil

func ProjectSourceBuildStatusConfigPtr added in v4.2.0 

func ProjectSourceBuildStatusConfigPtr(v *ProjectSourceBuildStatusConfigArgs) ProjectSourceBuildStatusConfigPtrInput

type ProjectSourceBuildStatusConfigPtrOutput added in v4.2.0 

type ProjectSourceBuildStatusConfigPtrOutput struct{ *pulumi.OutputState }

func (ProjectSourceBuildStatusConfigPtrOutput) Context added in v4.2.0 

func (o ProjectSourceBuildStatusConfigPtrOutput) Context() pulumi.StringPtrOutput

Specifies the context of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.

func (ProjectSourceBuildStatusConfigPtrOutput) Elem added in v4.2.0 

func (o ProjectSourceBuildStatusConfigPtrOutput) Elem() ProjectSourceBuildStatusConfigOutput

func (ProjectSourceBuildStatusConfigPtrOutput) ElementType added in v4.2.0 

func (ProjectSourceBuildStatusConfigPtrOutput) ElementType() reflect.Type

func (ProjectSourceBuildStatusConfigPtrOutput) TargetUrl added in v4.2.0 

func (o ProjectSourceBuildStatusConfigPtrOutput) TargetUrl() pulumi.StringPtrOutput

Specifies the target url of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.

func (ProjectSourceBuildStatusConfigPtrOutput) ToProjectSourceBuildStatusConfigPtrOutput added in v4.2.0 

func (o ProjectSourceBuildStatusConfigPtrOutput) ToProjectSourceBuildStatusConfigPtrOutput() ProjectSourceBuildStatusConfigPtrOutput

func (ProjectSourceBuildStatusConfigPtrOutput) ToProjectSourceBuildStatusConfigPtrOutputWithContext added in v4.2.0 

func (o ProjectSourceBuildStatusConfigPtrOutput) ToProjectSourceBuildStatusConfigPtrOutputWithContext(ctx context.Context) ProjectSourceBuildStatusConfigPtrOutput

type ProjectSourceGitSubmodulesConfig 

type ProjectSourceGitSubmodulesConfig struct {
	// Whether to fetch Git submodules for the AWS CodeBuild build project.
	FetchSubmodules bool `pulumi:"fetchSubmodules"`
}

type ProjectSourceGitSubmodulesConfigArgs 

type ProjectSourceGitSubmodulesConfigArgs struct {
	// Whether to fetch Git submodules for the AWS CodeBuild build project.
	FetchSubmodules pulumi.BoolInput `pulumi:"fetchSubmodules"`
}

func (ProjectSourceGitSubmodulesConfigArgs) ElementType 

func (ProjectSourceGitSubmodulesConfigArgs) ElementType() reflect.Type

func (ProjectSourceGitSubmodulesConfigArgs) ToProjectSourceGitSubmodulesConfigOutput 

func (i ProjectSourceGitSubmodulesConfigArgs) ToProjectSourceGitSubmodulesConfigOutput() ProjectSourceGitSubmodulesConfigOutput

func (ProjectSourceGitSubmodulesConfigArgs) ToProjectSourceGitSubmodulesConfigOutputWithContext 

func (i ProjectSourceGitSubmodulesConfigArgs) ToProjectSourceGitSubmodulesConfigOutputWithContext(ctx context.Context) ProjectSourceGitSubmodulesConfigOutput

func (ProjectSourceGitSubmodulesConfigArgs) ToProjectSourceGitSubmodulesConfigPtrOutput 

func (i ProjectSourceGitSubmodulesConfigArgs) ToProjectSourceGitSubmodulesConfigPtrOutput() ProjectSourceGitSubmodulesConfigPtrOutput

func (ProjectSourceGitSubmodulesConfigArgs) ToProjectSourceGitSubmodulesConfigPtrOutputWithContext 

func (i ProjectSourceGitSubmodulesConfigArgs) ToProjectSourceGitSubmodulesConfigPtrOutputWithContext(ctx context.Context) ProjectSourceGitSubmodulesConfigPtrOutput

type ProjectSourceGitSubmodulesConfigInput 

type ProjectSourceGitSubmodulesConfigInput interface {
	pulumi.Input

	ToProjectSourceGitSubmodulesConfigOutput() ProjectSourceGitSubmodulesConfigOutput
	ToProjectSourceGitSubmodulesConfigOutputWithContext(context.Context) ProjectSourceGitSubmodulesConfigOutput
}

ProjectSourceGitSubmodulesConfigInput is an input type that accepts ProjectSourceGitSubmodulesConfigArgs and ProjectSourceGitSubmodulesConfigOutput values. You can construct a concrete instance of `ProjectSourceGitSubmodulesConfigInput` via: 

ProjectSourceGitSubmodulesConfigArgs{...}

type ProjectSourceGitSubmodulesConfigOutput 

type ProjectSourceGitSubmodulesConfigOutput struct{ *pulumi.OutputState }

func (ProjectSourceGitSubmodulesConfigOutput) ElementType 

func (ProjectSourceGitSubmodulesConfigOutput) ElementType() reflect.Type

func (ProjectSourceGitSubmodulesConfigOutput) FetchSubmodules 

func (o ProjectSourceGitSubmodulesConfigOutput) FetchSubmodules() pulumi.BoolOutput

Whether to fetch Git submodules for the AWS CodeBuild build project.

func (ProjectSourceGitSubmodulesConfigOutput) ToProjectSourceGitSubmodulesConfigOutput 

func (o ProjectSourceGitSubmodulesConfigOutput) ToProjectSourceGitSubmodulesConfigOutput() ProjectSourceGitSubmodulesConfigOutput

func (ProjectSourceGitSubmodulesConfigOutput) ToProjectSourceGitSubmodulesConfigOutputWithContext 

func (o ProjectSourceGitSubmodulesConfigOutput) ToProjectSourceGitSubmodulesConfigOutputWithContext(ctx context.Context) ProjectSourceGitSubmodulesConfigOutput

func (ProjectSourceGitSubmodulesConfigOutput) ToProjectSourceGitSubmodulesConfigPtrOutput 

func (o ProjectSourceGitSubmodulesConfigOutput) ToProjectSourceGitSubmodulesConfigPtrOutput() ProjectSourceGitSubmodulesConfigPtrOutput

func (ProjectSourceGitSubmodulesConfigOutput) ToProjectSourceGitSubmodulesConfigPtrOutputWithContext 

func (o ProjectSourceGitSubmodulesConfigOutput) ToProjectSourceGitSubmodulesConfigPtrOutputWithContext(ctx context.Context) ProjectSourceGitSubmodulesConfigPtrOutput

type ProjectSourceGitSubmodulesConfigPtrInput 

type ProjectSourceGitSubmodulesConfigPtrInput interface {
	pulumi.Input

	ToProjectSourceGitSubmodulesConfigPtrOutput() ProjectSourceGitSubmodulesConfigPtrOutput
	ToProjectSourceGitSubmodulesConfigPtrOutputWithContext(context.Context) ProjectSourceGitSubmodulesConfigPtrOutput
}

ProjectSourceGitSubmodulesConfigPtrInput is an input type that accepts ProjectSourceGitSubmodulesConfigArgs, ProjectSourceGitSubmodulesConfigPtr and ProjectSourceGitSubmodulesConfigPtrOutput values. You can construct a concrete instance of `ProjectSourceGitSubmodulesConfigPtrInput` via: 

        ProjectSourceGitSubmodulesConfigArgs{...}

or:

        nil

func ProjectSourceGitSubmodulesConfigPtr 

func ProjectSourceGitSubmodulesConfigPtr(v *ProjectSourceGitSubmodulesConfigArgs) ProjectSourceGitSubmodulesConfigPtrInput

type ProjectSourceGitSubmodulesConfigPtrOutput 

type ProjectSourceGitSubmodulesConfigPtrOutput struct{ *pulumi.OutputState }

func (ProjectSourceGitSubmodulesConfigPtrOutput) Elem 

func (o ProjectSourceGitSubmodulesConfigPtrOutput) Elem() ProjectSourceGitSubmodulesConfigOutput

func (ProjectSourceGitSubmodulesConfigPtrOutput) ElementType 

func (ProjectSourceGitSubmodulesConfigPtrOutput) ElementType() reflect.Type

func (ProjectSourceGitSubmodulesConfigPtrOutput) FetchSubmodules 

func (o ProjectSourceGitSubmodulesConfigPtrOutput) FetchSubmodules() pulumi.BoolPtrOutput

Whether to fetch Git submodules for the AWS CodeBuild build project.

func (ProjectSourceGitSubmodulesConfigPtrOutput) ToProjectSourceGitSubmodulesConfigPtrOutput 

func (o ProjectSourceGitSubmodulesConfigPtrOutput) ToProjectSourceGitSubmodulesConfigPtrOutput() ProjectSourceGitSubmodulesConfigPtrOutput

func (ProjectSourceGitSubmodulesConfigPtrOutput) ToProjectSourceGitSubmodulesConfigPtrOutputWithContext 

func (o ProjectSourceGitSubmodulesConfigPtrOutput) ToProjectSourceGitSubmodulesConfigPtrOutputWithContext(ctx context.Context) ProjectSourceGitSubmodulesConfigPtrOutput

type ProjectSourceInput 

type ProjectSourceInput interface {
	pulumi.Input

	ToProjectSourceOutput() ProjectSourceOutput
	ToProjectSourceOutputWithContext(context.Context) ProjectSourceOutput
}

ProjectSourceInput is an input type that accepts ProjectSourceArgs and ProjectSourceOutput values. You can construct a concrete instance of `ProjectSourceInput` via: 

ProjectSourceArgs{...}

type ProjectSourceOutput 

type ProjectSourceOutput struct{ *pulumi.OutputState }

func (ProjectSourceOutput) Auth deprecated 

func (o ProjectSourceOutput) Auth() ProjectSourceAuthPtrOutput

Configuration block with the authorization settings for AWS CodeBuild to access the source code to be built. This information is for the AWS CodeBuild console's use only. Use the `codebuild.SourceCredential` resource instead. Auth blocks are documented below.

Deprecated: Use the aws_codebuild_source_credential resource instead

func (ProjectSourceOutput) BuildStatusConfig added in v4.2.0 

func (o ProjectSourceOutput) BuildStatusConfig() ProjectSourceBuildStatusConfigPtrOutput

Contains information that defines how the build project reports the build status to the source provider. This option is only used when the source provider is `GITHUB`, `GITHUB_ENTERPRISE`, or `BITBUCKET`.

func (ProjectSourceOutput) Buildspec 

func (o ProjectSourceOutput) Buildspec() pulumi.StringPtrOutput

Build specification to use for this build project's related builds. This must be set when `type` is `NO_SOURCE`.

func (ProjectSourceOutput) ElementType 

func (ProjectSourceOutput) ElementType() reflect.Type

func (ProjectSourceOutput) GitCloneDepth 

func (o ProjectSourceOutput) GitCloneDepth() pulumi.IntPtrOutput

Truncate git history to this many commits. Use `0` for a `Full` checkout which you need to run commands like `git branch --show-current`. See [AWS CodePipeline User Guide: Tutorial: Use full clone with a GitHub pipeline source](https://docs.aws.amazon.com/codepipeline/latest/userguide/tutorials-github-gitclone.html) for details.

func (ProjectSourceOutput) GitSubmodulesConfig 

func (o ProjectSourceOutput) GitSubmodulesConfig() ProjectSourceGitSubmodulesConfigPtrOutput

Configuration block. Detailed below.

func (ProjectSourceOutput) InsecureSsl 

func (o ProjectSourceOutput) InsecureSsl() pulumi.BoolPtrOutput

Ignore SSL warnings when connecting to source control.

func (ProjectSourceOutput) Location 

func (o ProjectSourceOutput) Location() pulumi.StringPtrOutput

Location of the source code from git or s3.

func (ProjectSourceOutput) ReportBuildStatus 

func (o ProjectSourceOutput) ReportBuildStatus() pulumi.BoolPtrOutput

Whether to report the status of a build's start and finish to your source provider. This option is only valid when the `type` is `BITBUCKET` or `GITHUB`.

func (ProjectSourceOutput) ToProjectSourceOutput 

func (o ProjectSourceOutput) ToProjectSourceOutput() ProjectSourceOutput

func (ProjectSourceOutput) ToProjectSourceOutputWithContext 

func (o ProjectSourceOutput) ToProjectSourceOutputWithContext(ctx context.Context) ProjectSourceOutput

func (ProjectSourceOutput) ToProjectSourcePtrOutput 

func (o ProjectSourceOutput) ToProjectSourcePtrOutput() ProjectSourcePtrOutput

func (ProjectSourceOutput) ToProjectSourcePtrOutputWithContext 

func (o ProjectSourceOutput) ToProjectSourcePtrOutputWithContext(ctx context.Context) ProjectSourcePtrOutput

func (ProjectSourceOutput) Type 

func (o ProjectSourceOutput) Type() pulumi.StringOutput

Type of repository that contains the source code to be built. Valid values: `CODECOMMIT`, `CODEPIPELINE`, `GITHUB`, `GITHUB_ENTERPRISE`, `BITBUCKET`, `S3`, `NO_SOURCE`.

type ProjectSourcePtrInput 

type ProjectSourcePtrInput interface {
	pulumi.Input

	ToProjectSourcePtrOutput() ProjectSourcePtrOutput
	ToProjectSourcePtrOutputWithContext(context.Context) ProjectSourcePtrOutput
}

ProjectSourcePtrInput is an input type that accepts ProjectSourceArgs, ProjectSourcePtr and ProjectSourcePtrOutput values. You can construct a concrete instance of `ProjectSourcePtrInput` via: 

        ProjectSourceArgs{...}

or:

        nil

func ProjectSourcePtr 

func ProjectSourcePtr(v *ProjectSourceArgs) ProjectSourcePtrInput

type ProjectSourcePtrOutput 

type ProjectSourcePtrOutput struct{ *pulumi.OutputState }

func (ProjectSourcePtrOutput) Auth deprecated 

func (o ProjectSourcePtrOutput) Auth() ProjectSourceAuthPtrOutput

Configuration block with the authorization settings for AWS CodeBuild to access the source code to be built. This information is for the AWS CodeBuild console's use only. Use the `codebuild.SourceCredential` resource instead. Auth blocks are documented below.

Deprecated: Use the aws_codebuild_source_credential resource instead

func (ProjectSourcePtrOutput) BuildStatusConfig added in v4.2.0 

func (o ProjectSourcePtrOutput) BuildStatusConfig() ProjectSourceBuildStatusConfigPtrOutput

Contains information that defines how the build project reports the build status to the source provider. This option is only used when the source provider is `GITHUB`, `GITHUB_ENTERPRISE`, or `BITBUCKET`.

func (ProjectSourcePtrOutput) Buildspec 

func (o ProjectSourcePtrOutput) Buildspec() pulumi.StringPtrOutput

Build specification to use for this build project's related builds. This must be set when `type` is `NO_SOURCE`.

func (ProjectSourcePtrOutput) Elem 

func (o ProjectSourcePtrOutput) Elem() ProjectSourceOutput

func (ProjectSourcePtrOutput) ElementType 

func (ProjectSourcePtrOutput) ElementType() reflect.Type

func (ProjectSourcePtrOutput) GitCloneDepth 

func (o ProjectSourcePtrOutput) GitCloneDepth() pulumi.IntPtrOutput

Truncate git history to this many commits. Use `0` for a `Full` checkout which you need to run commands like `git branch --show-current`. See [AWS CodePipeline User Guide: Tutorial: Use full clone with a GitHub pipeline source](https://docs.aws.amazon.com/codepipeline/latest/userguide/tutorials-github-gitclone.html) for details.

func (ProjectSourcePtrOutput) GitSubmodulesConfig 

func (o ProjectSourcePtrOutput) GitSubmodulesConfig() ProjectSourceGitSubmodulesConfigPtrOutput

Configuration block. Detailed below.

func (ProjectSourcePtrOutput) InsecureSsl 

func (o ProjectSourcePtrOutput) InsecureSsl() pulumi.BoolPtrOutput

Ignore SSL warnings when connecting to source control.

func (ProjectSourcePtrOutput) Location 

func (o ProjectSourcePtrOutput) Location() pulumi.StringPtrOutput

Location of the source code from git or s3.

func (ProjectSourcePtrOutput) ReportBuildStatus 

func (o ProjectSourcePtrOutput) ReportBuildStatus() pulumi.BoolPtrOutput

Whether to report the status of a build's start and finish to your source provider. This option is only valid when the `type` is `BITBUCKET` or `GITHUB`.

func (ProjectSourcePtrOutput) ToProjectSourcePtrOutput 

func (o ProjectSourcePtrOutput) ToProjectSourcePtrOutput() ProjectSourcePtrOutput

func (ProjectSourcePtrOutput) ToProjectSourcePtrOutputWithContext 

func (o ProjectSourcePtrOutput) ToProjectSourcePtrOutputWithContext(ctx context.Context) ProjectSourcePtrOutput

func (ProjectSourcePtrOutput) Type 

func (o ProjectSourcePtrOutput) Type() pulumi.StringPtrOutput

Type of repository that contains the source code to be built. Valid values: `CODECOMMIT`, `CODEPIPELINE`, `GITHUB`, `GITHUB_ENTERPRISE`, `BITBUCKET`, `S3`, `NO_SOURCE`.

type ProjectState 

type ProjectState struct {
	// ARN of the CodeBuild project.
	Arn pulumi.StringPtrInput
	// Configuration block. Detailed below.
	Artifacts ProjectArtifactsPtrInput
	// Generates a publicly-accessible URL for the projects build badge. Available as `badgeUrl` attribute when enabled.
	BadgeEnabled pulumi.BoolPtrInput
	// URL of the build badge when `badgeEnabled` is enabled.
	BadgeUrl pulumi.StringPtrInput
	// Defines the batch build options for the project.
	BuildBatchConfig ProjectBuildBatchConfigPtrInput
	// Number of minutes, from 5 to 480 (8 hours), for AWS CodeBuild to wait until timing out any related build that does not get marked as completed. The default is 60 minutes.
	BuildTimeout pulumi.IntPtrInput
	// Configuration block. Detailed below.
	Cache ProjectCachePtrInput
	// Specify a maximum number of concurrent builds for the project. The value specified must be greater than 0 and less than the account concurrent running builds limit.
	ConcurrentBuildLimit pulumi.IntPtrInput
	// Short description of the project.
	Description pulumi.StringPtrInput
	// AWS Key Management Service (AWS KMS) customer master key (CMK) to be used for encrypting the build project's build output artifacts.
	EncryptionKey pulumi.StringPtrInput
	// Configuration block. Detailed below.
	Environment ProjectEnvironmentPtrInput
	// A set of file system locations to to mount inside the build. File system locations are documented below.
	FileSystemLocations ProjectFileSystemLocationArrayInput
	// Configuration block. Detailed below.
	LogsConfig ProjectLogsConfigPtrInput
	// Name of the project. If `type` is set to `S3`, this is the name of the output artifact object
	Name pulumi.StringPtrInput
	// Specifies the visibility of the project's builds. Possible values are: `PUBLIC_READ` and `PRIVATE`. Default value is `PRIVATE`.
	ProjectVisibility pulumi.StringPtrInput
	// The project identifier used with the public build APIs.
	PublicProjectAlias pulumi.StringPtrInput
	// Number of minutes, from 5 to 480 (8 hours), a build is allowed to be queued before it times out. The default is 8 hours.
	QueuedTimeout pulumi.IntPtrInput
	// The ARN of the IAM role that enables CodeBuild to access the CloudWatch Logs and Amazon S3 artifacts for the project's builds.
	ResourceAccessRole pulumi.StringPtrInput
	// Configuration block. Detailed below.
	SecondaryArtifacts ProjectSecondaryArtifactArrayInput
	// Configuration block. Detailed below.
	SecondarySourceVersions ProjectSecondarySourceVersionArrayInput
	// Configuration block. Detailed below.
	SecondarySources ProjectSecondarySourceArrayInput
	// Specifies the service role ARN for the batch build project.
	ServiceRole pulumi.StringPtrInput
	// Configuration block. Detailed below.
	Source ProjectSourcePtrInput
	// The source version for the corresponding source identifier. See [AWS docs](https://docs.aws.amazon.com/codebuild/latest/APIReference/API_ProjectSourceVersion.html#CodeBuild-Type-ProjectSourceVersion-sourceVersion) for more details.
	SourceVersion pulumi.StringPtrInput
	// Map of tags to assign to the resource. .If configured with a provider `defaultTags` configuration block present, tags with matching keys will overwrite those defined at the provider-level.
	Tags pulumi.StringMapInput
	// A map of tags assigned to the resource, including those inherited from the provider `defaultTags` configuration block.
	TagsAll pulumi.StringMapInput
	// Configuration block. Detailed below.
	VpcConfig ProjectVpcConfigPtrInput
}

func (ProjectState) ElementType 

func (ProjectState) ElementType() reflect.Type

type ProjectVpcConfig 

type ProjectVpcConfig struct {
	// Security group IDs to assign to running builds.
	SecurityGroupIds []string `pulumi:"securityGroupIds"`
	// Subnet IDs within which to run builds.
	Subnets []string `pulumi:"subnets"`
	// ID of the VPC within which to run builds.
	VpcId string `pulumi:"vpcId"`
}

type ProjectVpcConfigArgs 

type ProjectVpcConfigArgs struct {
	// Security group IDs to assign to running builds.
	SecurityGroupIds pulumi.StringArrayInput `pulumi:"securityGroupIds"`
	// Subnet IDs within which to run builds.
	Subnets pulumi.StringArrayInput `pulumi:"subnets"`
	// ID of the VPC within which to run builds.
	VpcId pulumi.StringInput `pulumi:"vpcId"`
}

func (ProjectVpcConfigArgs) ElementType 

func (ProjectVpcConfigArgs) ElementType() reflect.Type

func (ProjectVpcConfigArgs) ToProjectVpcConfigOutput 

func (i ProjectVpcConfigArgs) ToProjectVpcConfigOutput() ProjectVpcConfigOutput

func (ProjectVpcConfigArgs) ToProjectVpcConfigOutputWithContext 

func (i ProjectVpcConfigArgs) ToProjectVpcConfigOutputWithContext(ctx context.Context) ProjectVpcConfigOutput

func (ProjectVpcConfigArgs) ToProjectVpcConfigPtrOutput 

func (i ProjectVpcConfigArgs) ToProjectVpcConfigPtrOutput() ProjectVpcConfigPtrOutput

func (ProjectVpcConfigArgs) ToProjectVpcConfigPtrOutputWithContext 

func (i ProjectVpcConfigArgs) ToProjectVpcConfigPtrOutputWithContext(ctx context.Context) ProjectVpcConfigPtrOutput

type ProjectVpcConfigInput 

type ProjectVpcConfigInput interface {
	pulumi.Input

	ToProjectVpcConfigOutput() ProjectVpcConfigOutput
	ToProjectVpcConfigOutputWithContext(context.Context) ProjectVpcConfigOutput
}

ProjectVpcConfigInput is an input type that accepts ProjectVpcConfigArgs and ProjectVpcConfigOutput values. You can construct a concrete instance of `ProjectVpcConfigInput` via: 

ProjectVpcConfigArgs{...}

type ProjectVpcConfigOutput 

type ProjectVpcConfigOutput struct{ *pulumi.OutputState }

func (ProjectVpcConfigOutput) ElementType 

func (ProjectVpcConfigOutput) ElementType() reflect.Type

func (ProjectVpcConfigOutput) SecurityGroupIds 

func (o ProjectVpcConfigOutput) SecurityGroupIds() pulumi.StringArrayOutput

Security group IDs to assign to running builds.

func (ProjectVpcConfigOutput) Subnets 

func (o ProjectVpcConfigOutput) Subnets() pulumi.StringArrayOutput

Subnet IDs within which to run builds.

func (ProjectVpcConfigOutput) ToProjectVpcConfigOutput 

func (o ProjectVpcConfigOutput) ToProjectVpcConfigOutput() ProjectVpcConfigOutput

func (ProjectVpcConfigOutput) ToProjectVpcConfigOutputWithContext 

func (o ProjectVpcConfigOutput) ToProjectVpcConfigOutputWithContext(ctx context.Context) ProjectVpcConfigOutput

func (ProjectVpcConfigOutput) ToProjectVpcConfigPtrOutput 

func (o ProjectVpcConfigOutput) ToProjectVpcConfigPtrOutput() ProjectVpcConfigPtrOutput

func (ProjectVpcConfigOutput) ToProjectVpcConfigPtrOutputWithContext 

func (o ProjectVpcConfigOutput) ToProjectVpcConfigPtrOutputWithContext(ctx context.Context) ProjectVpcConfigPtrOutput

func (ProjectVpcConfigOutput) VpcId 

func (o ProjectVpcConfigOutput) VpcId() pulumi.StringOutput

ID of the VPC within which to run builds.

type ProjectVpcConfigPtrInput 

type ProjectVpcConfigPtrInput interface {
	pulumi.Input

	ToProjectVpcConfigPtrOutput() ProjectVpcConfigPtrOutput
	ToProjectVpcConfigPtrOutputWithContext(context.Context) ProjectVpcConfigPtrOutput
}

ProjectVpcConfigPtrInput is an input type that accepts ProjectVpcConfigArgs, ProjectVpcConfigPtr and ProjectVpcConfigPtrOutput values. You can construct a concrete instance of `ProjectVpcConfigPtrInput` via: 

        ProjectVpcConfigArgs{...}

or:

        nil

func ProjectVpcConfigPtr 

func ProjectVpcConfigPtr(v *ProjectVpcConfigArgs) ProjectVpcConfigPtrInput

type ProjectVpcConfigPtrOutput 

type ProjectVpcConfigPtrOutput struct{ *pulumi.OutputState }

func (ProjectVpcConfigPtrOutput) Elem 

func (o ProjectVpcConfigPtrOutput) Elem() ProjectVpcConfigOutput

func (ProjectVpcConfigPtrOutput) ElementType 

func (ProjectVpcConfigPtrOutput) ElementType() reflect.Type

func (ProjectVpcConfigPtrOutput) SecurityGroupIds 

func (o ProjectVpcConfigPtrOutput) SecurityGroupIds() pulumi.StringArrayOutput

Security group IDs to assign to running builds.

func (ProjectVpcConfigPtrOutput) Subnets 

func (o ProjectVpcConfigPtrOutput) Subnets() pulumi.StringArrayOutput

Subnet IDs within which to run builds.

func (ProjectVpcConfigPtrOutput) ToProjectVpcConfigPtrOutput 

func (o ProjectVpcConfigPtrOutput) ToProjectVpcConfigPtrOutput() ProjectVpcConfigPtrOutput

func (ProjectVpcConfigPtrOutput) ToProjectVpcConfigPtrOutputWithContext 

func (o ProjectVpcConfigPtrOutput) ToProjectVpcConfigPtrOutputWithContext(ctx context.Context) ProjectVpcConfigPtrOutput

func (ProjectVpcConfigPtrOutput) VpcId 

func (o ProjectVpcConfigPtrOutput) VpcId() pulumi.StringPtrOutput

ID of the VPC within which to run builds.

type ReportGroup 

type ReportGroup struct {
	pulumi.CustomResourceState

	// The ARN of Report Group.
	Arn pulumi.StringOutput `pulumi:"arn"`
	// The date and time this Report Group was created.
	Created pulumi.StringOutput `pulumi:"created"`
	// If `true`, deletes any reports that belong to a report group before deleting the report group. If `false`, you must delete any reports in the report group before deleting it. Default value is `false`.
	DeleteReports pulumi.BoolPtrOutput `pulumi:"deleteReports"`
	// Information about the destination where the raw data of this Report Group is exported. see Export Config documented below.
	ExportConfig ReportGroupExportConfigOutput `pulumi:"exportConfig"`
	// The name of a Report Group.
	Name pulumi.StringOutput `pulumi:"name"`
	// Key-value mapping of resource tags. .If configured with a provider `defaultTags` configuration block present, tags with matching keys will overwrite those defined at the provider-level.
	Tags pulumi.StringMapOutput `pulumi:"tags"`
	// A map of tags assigned to the resource, including those inherited from the provider .
	TagsAll pulumi.StringMapOutput `pulumi:"tagsAll"`
	// The export configuration type. Valid values are `S3` and `NO_EXPORT`.
	Type pulumi.StringOutput `pulumi:"type"`
}

Provides a CodeBuild Report Groups Resource.

## Example Usage

```go package main

import ( 

"fmt"

"github.com/pulumi/pulumi-aws/sdk/v4/go/aws/codebuild"
"github.com/pulumi/pulumi-aws/sdk/v4/go/aws/kms"
"github.com/pulumi/pulumi-aws/sdk/v4/go/aws/s3"
"github.com/pulumi/pulumi/sdk/v3/go/pulumi"

) 

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		exampleKey, err := kms.NewKey(ctx, "exampleKey", &kms.KeyArgs{
			Description:          pulumi.String("my test kms key"),
			DeletionWindowInDays: pulumi.Int(7),
			Policy:               pulumi.String(fmt.Sprintf("%v%v%v%v%v%v%v%v%v%v%v%v%v%v%v", "{\n", "  \"Version\": \"2012-10-17\",\n", "  \"Id\": \"kms-tf-1\",\n", "  \"Statement\": [\n", "    {\n", "      \"Sid\": \"Enable IAM User Permissions\",\n", "      \"Effect\": \"Allow\",\n", "      \"Principal\": {\n", "        \"AWS\": \"*\"\n", "      },\n", "      \"Action\": \"kms:*\",\n", "      \"Resource\": \"*\"\n", "    }\n", "  ]\n", "}\n")),
		})
		if err != nil {
			return err
		}
		exampleBucket, err := s3.NewBucket(ctx, "exampleBucket", nil)
		if err != nil {
			return err
		}
		_, err = codebuild.NewReportGroup(ctx, "exampleReportGroup", &codebuild.ReportGroupArgs{
			Type: pulumi.String("TEST"),
			ExportConfig: &codebuild.ReportGroupExportConfigArgs{
				Type: pulumi.String("S3"),
				S3Destination: &codebuild.ReportGroupExportConfigS3DestinationArgs{
					Bucket:             exampleBucket.ID(),
					EncryptionDisabled: pulumi.Bool(false),
					EncryptionKey:      exampleKey.Arn,
					Packaging:          pulumi.String("NONE"),
					Path:               pulumi.String("/some"),
				},
			},
		})
		if err != nil {
			return err
		}
		return nil
	})
}

```

## Import

CodeBuild Report Group can be imported using the CodeBuild Report Group arn, e.g.,

```sh 

$ pulumi import aws:codebuild/reportGroup:ReportGroup example arn:aws:codebuild:us-west-2:123456789:report-group/report-group-name

```

func GetReportGroup 

func GetReportGroup(ctx *pulumi.Context,
	name string, id pulumi.IDInput, state *ReportGroupState, opts ...pulumi.ResourceOption) (*ReportGroup, error)

GetReportGroup gets an existing ReportGroup resource's state with the given name, ID, and optional state properties that are used to uniquely qualify the lookup (nil if not required).

func NewReportGroup 

func NewReportGroup(ctx *pulumi.Context,
	name string, args *ReportGroupArgs, opts ...pulumi.ResourceOption) (*ReportGroup, error)

NewReportGroup registers a new resource with the given unique name, arguments, and options.

func (*ReportGroup) ElementType 

func (*ReportGroup) ElementType() reflect.Type

func (*ReportGroup) ToReportGroupOutput 

func (i *ReportGroup) ToReportGroupOutput() ReportGroupOutput

func (*ReportGroup) ToReportGroupOutputWithContext 

func (i *ReportGroup) ToReportGroupOutputWithContext(ctx context.Context) ReportGroupOutput

type ReportGroupArgs 

type ReportGroupArgs struct {
	// If `true`, deletes any reports that belong to a report group before deleting the report group. If `false`, you must delete any reports in the report group before deleting it. Default value is `false`.
	DeleteReports pulumi.BoolPtrInput
	// Information about the destination where the raw data of this Report Group is exported. see Export Config documented below.
	ExportConfig ReportGroupExportConfigInput
	// The name of a Report Group.
	Name pulumi.StringPtrInput
	// Key-value mapping of resource tags. .If configured with a provider `defaultTags` configuration block present, tags with matching keys will overwrite those defined at the provider-level.
	Tags pulumi.StringMapInput
	// The export configuration type. Valid values are `S3` and `NO_EXPORT`.
	Type pulumi.StringInput
}

The set of arguments for constructing a ReportGroup resource.

func (ReportGroupArgs) ElementType 

func (ReportGroupArgs) ElementType() reflect.Type

type ReportGroupArray 

type ReportGroupArray []ReportGroupInput

func (ReportGroupArray) ElementType 

func (ReportGroupArray) ElementType() reflect.Type

func (ReportGroupArray) ToReportGroupArrayOutput 

func (i ReportGroupArray) ToReportGroupArrayOutput() ReportGroupArrayOutput

func (ReportGroupArray) ToReportGroupArrayOutputWithContext 

func (i ReportGroupArray) ToReportGroupArrayOutputWithContext(ctx context.Context) ReportGroupArrayOutput

type ReportGroupArrayInput 

type ReportGroupArrayInput interface {
	pulumi.Input

	ToReportGroupArrayOutput() ReportGroupArrayOutput
	ToReportGroupArrayOutputWithContext(context.Context) ReportGroupArrayOutput
}

ReportGroupArrayInput is an input type that accepts ReportGroupArray and ReportGroupArrayOutput values. You can construct a concrete instance of `ReportGroupArrayInput` via: 

ReportGroupArray{ ReportGroupArgs{...} }

type ReportGroupArrayOutput 

type ReportGroupArrayOutput struct{ *pulumi.OutputState }

func (ReportGroupArrayOutput) ElementType 

func (ReportGroupArrayOutput) ElementType() reflect.Type

func (ReportGroupArrayOutput) Index 

func (o ReportGroupArrayOutput) Index(i pulumi.IntInput) ReportGroupOutput

func (ReportGroupArrayOutput) ToReportGroupArrayOutput 

func (o ReportGroupArrayOutput) ToReportGroupArrayOutput() ReportGroupArrayOutput

func (ReportGroupArrayOutput) ToReportGroupArrayOutputWithContext 

func (o ReportGroupArrayOutput) ToReportGroupArrayOutputWithContext(ctx context.Context) ReportGroupArrayOutput

type ReportGroupExportConfig 

type ReportGroupExportConfig struct {
	// contains information about the S3 bucket where the run of a report is exported. see S3 Destination documented below.
	S3Destination *ReportGroupExportConfigS3Destination `pulumi:"s3Destination"`
	// The export configuration type. Valid values are `S3` and `NO_EXPORT`.
	Type string `pulumi:"type"`
}

type ReportGroupExportConfigArgs 

type ReportGroupExportConfigArgs struct {
	// contains information about the S3 bucket where the run of a report is exported. see S3 Destination documented below.
	S3Destination ReportGroupExportConfigS3DestinationPtrInput `pulumi:"s3Destination"`
	// The export configuration type. Valid values are `S3` and `NO_EXPORT`.
	Type pulumi.StringInput `pulumi:"type"`
}

func (ReportGroupExportConfigArgs) ElementType 

func (ReportGroupExportConfigArgs) ElementType() reflect.Type

func (ReportGroupExportConfigArgs) ToReportGroupExportConfigOutput 

func (i ReportGroupExportConfigArgs) ToReportGroupExportConfigOutput() ReportGroupExportConfigOutput

func (ReportGroupExportConfigArgs) ToReportGroupExportConfigOutputWithContext 

func (i ReportGroupExportConfigArgs) ToReportGroupExportConfigOutputWithContext(ctx context.Context) ReportGroupExportConfigOutput

func (ReportGroupExportConfigArgs) ToReportGroupExportConfigPtrOutput 

func (i ReportGroupExportConfigArgs) ToReportGroupExportConfigPtrOutput() ReportGroupExportConfigPtrOutput

func (ReportGroupExportConfigArgs) ToReportGroupExportConfigPtrOutputWithContext 

func (i ReportGroupExportConfigArgs) ToReportGroupExportConfigPtrOutputWithContext(ctx context.Context) ReportGroupExportConfigPtrOutput

type ReportGroupExportConfigInput 

type ReportGroupExportConfigInput interface {
	pulumi.Input

	ToReportGroupExportConfigOutput() ReportGroupExportConfigOutput
	ToReportGroupExportConfigOutputWithContext(context.Context) ReportGroupExportConfigOutput
}

ReportGroupExportConfigInput is an input type that accepts ReportGroupExportConfigArgs and ReportGroupExportConfigOutput values. You can construct a concrete instance of `ReportGroupExportConfigInput` via: 

ReportGroupExportConfigArgs{...}

type ReportGroupExportConfigOutput 

type ReportGroupExportConfigOutput struct{ *pulumi.OutputState }

func (ReportGroupExportConfigOutput) ElementType 

func (ReportGroupExportConfigOutput) ElementType() reflect.Type

func (ReportGroupExportConfigOutput) S3Destination 

func (o ReportGroupExportConfigOutput) S3Destination() ReportGroupExportConfigS3DestinationPtrOutput

contains information about the S3 bucket where the run of a report is exported. see S3 Destination documented below.

func (ReportGroupExportConfigOutput) ToReportGroupExportConfigOutput 

func (o ReportGroupExportConfigOutput) ToReportGroupExportConfigOutput() ReportGroupExportConfigOutput

func (ReportGroupExportConfigOutput) ToReportGroupExportConfigOutputWithContext 

func (o ReportGroupExportConfigOutput) ToReportGroupExportConfigOutputWithContext(ctx context.Context) ReportGroupExportConfigOutput

func (ReportGroupExportConfigOutput) ToReportGroupExportConfigPtrOutput 

func (o ReportGroupExportConfigOutput) ToReportGroupExportConfigPtrOutput() ReportGroupExportConfigPtrOutput

func (ReportGroupExportConfigOutput) ToReportGroupExportConfigPtrOutputWithContext 

func (o ReportGroupExportConfigOutput) ToReportGroupExportConfigPtrOutputWithContext(ctx context.Context) ReportGroupExportConfigPtrOutput

func (ReportGroupExportConfigOutput) Type 

func (o ReportGroupExportConfigOutput) Type() pulumi.StringOutput

The export configuration type. Valid values are `S3` and `NO_EXPORT`.

type ReportGroupExportConfigPtrInput 

type ReportGroupExportConfigPtrInput interface {
	pulumi.Input

	ToReportGroupExportConfigPtrOutput() ReportGroupExportConfigPtrOutput
	ToReportGroupExportConfigPtrOutputWithContext(context.Context) ReportGroupExportConfigPtrOutput
}

ReportGroupExportConfigPtrInput is an input type that accepts ReportGroupExportConfigArgs, ReportGroupExportConfigPtr and ReportGroupExportConfigPtrOutput values. You can construct a concrete instance of `ReportGroupExportConfigPtrInput` via: 

        ReportGroupExportConfigArgs{...}

or:

        nil

func ReportGroupExportConfigPtr 

func ReportGroupExportConfigPtr(v *ReportGroupExportConfigArgs) ReportGroupExportConfigPtrInput

type ReportGroupExportConfigPtrOutput 

type ReportGroupExportConfigPtrOutput struct{ *pulumi.OutputState }

func (ReportGroupExportConfigPtrOutput) Elem 

func (o ReportGroupExportConfigPtrOutput) Elem() ReportGroupExportConfigOutput

func (ReportGroupExportConfigPtrOutput) ElementType 

func (ReportGroupExportConfigPtrOutput) ElementType() reflect.Type

func (ReportGroupExportConfigPtrOutput) S3Destination 

func (o ReportGroupExportConfigPtrOutput) S3Destination() ReportGroupExportConfigS3DestinationPtrOutput

contains information about the S3 bucket where the run of a report is exported. see S3 Destination documented below.

func (ReportGroupExportConfigPtrOutput) ToReportGroupExportConfigPtrOutput 

func (o ReportGroupExportConfigPtrOutput) ToReportGroupExportConfigPtrOutput() ReportGroupExportConfigPtrOutput

func (ReportGroupExportConfigPtrOutput) ToReportGroupExportConfigPtrOutputWithContext 

func (o ReportGroupExportConfigPtrOutput) ToReportGroupExportConfigPtrOutputWithContext(ctx context.Context) ReportGroupExportConfigPtrOutput

func (ReportGroupExportConfigPtrOutput) Type 

func (o ReportGroupExportConfigPtrOutput) Type() pulumi.StringPtrOutput

The export configuration type. Valid values are `S3` and `NO_EXPORT`.

type ReportGroupExportConfigS3Destination 

type ReportGroupExportConfigS3Destination struct {
	// The name of the S3 bucket where the raw data of a report are exported.
	Bucket string `pulumi:"bucket"`
	// A boolean value that specifies if the results of a report are encrypted.
	// **Note: the API does not currently allow setting encryption as disabled**
	EncryptionDisabled *bool `pulumi:"encryptionDisabled"`
	// The encryption key for the report's encrypted raw data. The KMS key ARN.
	EncryptionKey string `pulumi:"encryptionKey"`
	// The type of build output artifact to create. Valid values are: `NONE` (default) and `ZIP`.
	Packaging *string `pulumi:"packaging"`
	// The path to the exported report's raw data results.
	Path *string `pulumi:"path"`
}

type ReportGroupExportConfigS3DestinationArgs 

type ReportGroupExportConfigS3DestinationArgs struct {
	// The name of the S3 bucket where the raw data of a report are exported.
	Bucket pulumi.StringInput `pulumi:"bucket"`
	// A boolean value that specifies if the results of a report are encrypted.
	// **Note: the API does not currently allow setting encryption as disabled**
	EncryptionDisabled pulumi.BoolPtrInput `pulumi:"encryptionDisabled"`
	// The encryption key for the report's encrypted raw data. The KMS key ARN.
	EncryptionKey pulumi.StringInput `pulumi:"encryptionKey"`
	// The type of build output artifact to create. Valid values are: `NONE` (default) and `ZIP`.
	Packaging pulumi.StringPtrInput `pulumi:"packaging"`
	// The path to the exported report's raw data results.
	Path pulumi.StringPtrInput `pulumi:"path"`
}

func (ReportGroupExportConfigS3DestinationArgs) ElementType 

func (ReportGroupExportConfigS3DestinationArgs) ElementType() reflect.Type

func (ReportGroupExportConfigS3DestinationArgs) ToReportGroupExportConfigS3DestinationOutput 

func (i ReportGroupExportConfigS3DestinationArgs) ToReportGroupExportConfigS3DestinationOutput() ReportGroupExportConfigS3DestinationOutput

func (ReportGroupExportConfigS3DestinationArgs) ToReportGroupExportConfigS3DestinationOutputWithContext 

func (i ReportGroupExportConfigS3DestinationArgs) ToReportGroupExportConfigS3DestinationOutputWithContext(ctx context.Context) ReportGroupExportConfigS3DestinationOutput

func (ReportGroupExportConfigS3DestinationArgs) ToReportGroupExportConfigS3DestinationPtrOutput 

func (i ReportGroupExportConfigS3DestinationArgs) ToReportGroupExportConfigS3DestinationPtrOutput() ReportGroupExportConfigS3DestinationPtrOutput

func (ReportGroupExportConfigS3DestinationArgs) ToReportGroupExportConfigS3DestinationPtrOutputWithContext 

func (i ReportGroupExportConfigS3DestinationArgs) ToReportGroupExportConfigS3DestinationPtrOutputWithContext(ctx context.Context) ReportGroupExportConfigS3DestinationPtrOutput

type ReportGroupExportConfigS3DestinationInput 

type ReportGroupExportConfigS3DestinationInput interface {
	pulumi.Input

	ToReportGroupExportConfigS3DestinationOutput() ReportGroupExportConfigS3DestinationOutput
	ToReportGroupExportConfigS3DestinationOutputWithContext(context.Context) ReportGroupExportConfigS3DestinationOutput
}

ReportGroupExportConfigS3DestinationInput is an input type that accepts ReportGroupExportConfigS3DestinationArgs and ReportGroupExportConfigS3DestinationOutput values. You can construct a concrete instance of `ReportGroupExportConfigS3DestinationInput` via: 

ReportGroupExportConfigS3DestinationArgs{...}

type ReportGroupExportConfigS3DestinationOutput 

type ReportGroupExportConfigS3DestinationOutput struct{ *pulumi.OutputState }

func (ReportGroupExportConfigS3DestinationOutput) Bucket 

func (o ReportGroupExportConfigS3DestinationOutput) Bucket() pulumi.StringOutput

The name of the S3 bucket where the raw data of a report are exported.

func (ReportGroupExportConfigS3DestinationOutput) ElementType 

func (ReportGroupExportConfigS3DestinationOutput) ElementType() reflect.Type

func (ReportGroupExportConfigS3DestinationOutput) EncryptionDisabled 

func (o ReportGroupExportConfigS3DestinationOutput) EncryptionDisabled() pulumi.BoolPtrOutput

A boolean value that specifies if the results of a report are encrypted. **Note: the API does not currently allow setting encryption as disabled**

func (ReportGroupExportConfigS3DestinationOutput) EncryptionKey 

func (o ReportGroupExportConfigS3DestinationOutput) EncryptionKey() pulumi.StringOutput

The encryption key for the report's encrypted raw data. The KMS key ARN.

func (ReportGroupExportConfigS3DestinationOutput) Packaging 

func (o ReportGroupExportConfigS3DestinationOutput) Packaging() pulumi.StringPtrOutput

The type of build output artifact to create. Valid values are: `NONE` (default) and `ZIP`.

func (ReportGroupExportConfigS3DestinationOutput) Path 

func (o ReportGroupExportConfigS3DestinationOutput) Path() pulumi.StringPtrOutput

The path to the exported report's raw data results.

func (ReportGroupExportConfigS3DestinationOutput) ToReportGroupExportConfigS3DestinationOutput 

func (o ReportGroupExportConfigS3DestinationOutput) ToReportGroupExportConfigS3DestinationOutput() ReportGroupExportConfigS3DestinationOutput

func (ReportGroupExportConfigS3DestinationOutput) ToReportGroupExportConfigS3DestinationOutputWithContext 

func (o ReportGroupExportConfigS3DestinationOutput) ToReportGroupExportConfigS3DestinationOutputWithContext(ctx context.Context) ReportGroupExportConfigS3DestinationOutput

func (ReportGroupExportConfigS3DestinationOutput) ToReportGroupExportConfigS3DestinationPtrOutput 

func (o ReportGroupExportConfigS3DestinationOutput) ToReportGroupExportConfigS3DestinationPtrOutput() ReportGroupExportConfigS3DestinationPtrOutput

func (ReportGroupExportConfigS3DestinationOutput) ToReportGroupExportConfigS3DestinationPtrOutputWithContext 

func (o ReportGroupExportConfigS3DestinationOutput) ToReportGroupExportConfigS3DestinationPtrOutputWithContext(ctx context.Context) ReportGroupExportConfigS3DestinationPtrOutput

type ReportGroupExportConfigS3DestinationPtrInput 

type ReportGroupExportConfigS3DestinationPtrInput interface {
	pulumi.Input

	ToReportGroupExportConfigS3DestinationPtrOutput() ReportGroupExportConfigS3DestinationPtrOutput
	ToReportGroupExportConfigS3DestinationPtrOutputWithContext(context.Context) ReportGroupExportConfigS3DestinationPtrOutput
}

ReportGroupExportConfigS3DestinationPtrInput is an input type that accepts ReportGroupExportConfigS3DestinationArgs, ReportGroupExportConfigS3DestinationPtr and ReportGroupExportConfigS3DestinationPtrOutput values. You can construct a concrete instance of `ReportGroupExportConfigS3DestinationPtrInput` via: 

        ReportGroupExportConfigS3DestinationArgs{...}

or:

        nil

func ReportGroupExportConfigS3DestinationPtr 

func ReportGroupExportConfigS3DestinationPtr(v *ReportGroupExportConfigS3DestinationArgs) ReportGroupExportConfigS3DestinationPtrInput

type ReportGroupExportConfigS3DestinationPtrOutput 

type ReportGroupExportConfigS3DestinationPtrOutput struct{ *pulumi.OutputState }

func (ReportGroupExportConfigS3DestinationPtrOutput) Bucket 

func (o ReportGroupExportConfigS3DestinationPtrOutput) Bucket() pulumi.StringPtrOutput

The name of the S3 bucket where the raw data of a report are exported.

func (ReportGroupExportConfigS3DestinationPtrOutput) Elem 

func (o ReportGroupExportConfigS3DestinationPtrOutput) Elem() ReportGroupExportConfigS3DestinationOutput

func (ReportGroupExportConfigS3DestinationPtrOutput) ElementType 

func (ReportGroupExportConfigS3DestinationPtrOutput) ElementType() reflect.Type

func (ReportGroupExportConfigS3DestinationPtrOutput) EncryptionDisabled 

func (o ReportGroupExportConfigS3DestinationPtrOutput) EncryptionDisabled() pulumi.BoolPtrOutput

A boolean value that specifies if the results of a report are encrypted. **Note: the API does not currently allow setting encryption as disabled**

func (ReportGroupExportConfigS3DestinationPtrOutput) EncryptionKey 

func (o ReportGroupExportConfigS3DestinationPtrOutput) EncryptionKey() pulumi.StringPtrOutput

The encryption key for the report's encrypted raw data. The KMS key ARN.

func (ReportGroupExportConfigS3DestinationPtrOutput) Packaging 

func (o ReportGroupExportConfigS3DestinationPtrOutput) Packaging() pulumi.StringPtrOutput

The type of build output artifact to create. Valid values are: `NONE` (default) and `ZIP`.

func (ReportGroupExportConfigS3DestinationPtrOutput) Path 

func (o ReportGroupExportConfigS3DestinationPtrOutput) Path() pulumi.StringPtrOutput

The path to the exported report's raw data results.

func (ReportGroupExportConfigS3DestinationPtrOutput) ToReportGroupExportConfigS3DestinationPtrOutput 

func (o ReportGroupExportConfigS3DestinationPtrOutput) ToReportGroupExportConfigS3DestinationPtrOutput() ReportGroupExportConfigS3DestinationPtrOutput

func (ReportGroupExportConfigS3DestinationPtrOutput) ToReportGroupExportConfigS3DestinationPtrOutputWithContext 

func (o ReportGroupExportConfigS3DestinationPtrOutput) ToReportGroupExportConfigS3DestinationPtrOutputWithContext(ctx context.Context) ReportGroupExportConfigS3DestinationPtrOutput

type ReportGroupInput 

type ReportGroupInput interface {
	pulumi.Input

	ToReportGroupOutput() ReportGroupOutput
	ToReportGroupOutputWithContext(ctx context.Context) ReportGroupOutput
}

type ReportGroupMap 

type ReportGroupMap map[string]ReportGroupInput

func (ReportGroupMap) ElementType 

func (ReportGroupMap) ElementType() reflect.Type

func (ReportGroupMap) ToReportGroupMapOutput 

func (i ReportGroupMap) ToReportGroupMapOutput() ReportGroupMapOutput

func (ReportGroupMap) ToReportGroupMapOutputWithContext 

func (i ReportGroupMap) ToReportGroupMapOutputWithContext(ctx context.Context) ReportGroupMapOutput

type ReportGroupMapInput 

type ReportGroupMapInput interface {
	pulumi.Input

	ToReportGroupMapOutput() ReportGroupMapOutput
	ToReportGroupMapOutputWithContext(context.Context) ReportGroupMapOutput
}

ReportGroupMapInput is an input type that accepts ReportGroupMap and ReportGroupMapOutput values. You can construct a concrete instance of `ReportGroupMapInput` via: 

ReportGroupMap{ "key": ReportGroupArgs{...} }

type ReportGroupMapOutput 

type ReportGroupMapOutput struct{ *pulumi.OutputState }

func (ReportGroupMapOutput) ElementType 

func (ReportGroupMapOutput) ElementType() reflect.Type

func (ReportGroupMapOutput) MapIndex 

func (o ReportGroupMapOutput) MapIndex(k pulumi.StringInput) ReportGroupOutput

func (ReportGroupMapOutput) ToReportGroupMapOutput 

func (o ReportGroupMapOutput) ToReportGroupMapOutput() ReportGroupMapOutput

func (ReportGroupMapOutput) ToReportGroupMapOutputWithContext 

func (o ReportGroupMapOutput) ToReportGroupMapOutputWithContext(ctx context.Context) ReportGroupMapOutput

type ReportGroupOutput 

type ReportGroupOutput struct{ *pulumi.OutputState }

func (ReportGroupOutput) ElementType 

func (ReportGroupOutput) ElementType() reflect.Type

func (ReportGroupOutput) ToReportGroupOutput 

func (o ReportGroupOutput) ToReportGroupOutput() ReportGroupOutput

func (ReportGroupOutput) ToReportGroupOutputWithContext 

func (o ReportGroupOutput) ToReportGroupOutputWithContext(ctx context.Context) ReportGroupOutput

type ReportGroupState 

type ReportGroupState struct {
	// The ARN of Report Group.
	Arn pulumi.StringPtrInput
	// The date and time this Report Group was created.
	Created pulumi.StringPtrInput
	// If `true`, deletes any reports that belong to a report group before deleting the report group. If `false`, you must delete any reports in the report group before deleting it. Default value is `false`.
	DeleteReports pulumi.BoolPtrInput
	// Information about the destination where the raw data of this Report Group is exported. see Export Config documented below.
	ExportConfig ReportGroupExportConfigPtrInput
	// The name of a Report Group.
	Name pulumi.StringPtrInput
	// Key-value mapping of resource tags. .If configured with a provider `defaultTags` configuration block present, tags with matching keys will overwrite those defined at the provider-level.
	Tags pulumi.StringMapInput
	// A map of tags assigned to the resource, including those inherited from the provider .
	TagsAll pulumi.StringMapInput
	// The export configuration type. Valid values are `S3` and `NO_EXPORT`.
	Type pulumi.StringPtrInput
}

func (ReportGroupState) ElementType 

func (ReportGroupState) ElementType() reflect.Type

type ResourcePolicy added in v4.34.0 

type ResourcePolicy struct {
	pulumi.CustomResourceState

	// A JSON-formatted resource policy. For more information, see [Sharing a Projec](https://docs.aws.amazon.com/codebuild/latest/userguide/project-sharing.html#project-sharing-share) and [Sharing a Report Group](https://docs.aws.amazon.com/codebuild/latest/userguide/report-groups-sharing.html#report-groups-sharing-share).
	Policy pulumi.StringOutput `pulumi:"policy"`
	// The ARN of the Project or ReportGroup resource you want to associate with a resource policy.
	ResourceArn pulumi.StringOutput `pulumi:"resourceArn"`
}

Provides a CodeBuild Resource Policy Resource.

## Example Usage

```go package main

import ( 

"encoding/json"
"fmt"

"github.com/pulumi/pulumi-aws/sdk/v4/go/aws"
"github.com/pulumi/pulumi-aws/sdk/v4/go/aws/codebuild"
"github.com/pulumi/pulumi/sdk/v3/go/pulumi"

) 

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		exampleReportGroup, err := codebuild.NewReportGroup(ctx, "exampleReportGroup", &codebuild.ReportGroupArgs{
			Type: pulumi.String("TEST"),
			ExportConfig: &codebuild.ReportGroupExportConfigArgs{
				Type: pulumi.String("NO_EXPORT"),
			},
		})
		if err != nil {
			return err
		}
		currentPartition, err := aws.GetPartition(ctx, nil, nil)
		if err != nil {
			return err
		}
		currentCallerIdentity, err := aws.GetCallerIdentity(ctx, nil, nil)
		if err != nil {
			return err
		}
		_, err = codebuild.NewResourcePolicy(ctx, "exampleResourcePolicy", &codebuild.ResourcePolicyArgs{
			ResourceArn: exampleReportGroup.Arn,
			Policy: exampleReportGroup.Arn.ApplyT(func(arn string) (pulumi.String, error) {
				var _zero pulumi.String
				tmpJSON0, err := json.Marshal(map[string]interface{}{
					"Version": "2012-10-17",
					"Id":      "default",
					"Statement": []map[string]interface{}{
						map[string]interface{}{
							"Sid":    "default",
							"Effect": "Allow",
							"Principal": map[string]interface{}{
								"AWS": fmt.Sprintf("%v%v%v%v%v", "arn:", currentPartition.Partition, ":iam::", currentCallerIdentity.AccountId, ":root"),
							},
							"Action": []string{
								"codebuild:BatchGetReportGroups",
								"codebuild:BatchGetReports",
								"codebuild:ListReportsForReportGroup",
								"codebuild:DescribeTestCases",
							},
							"Resource": arn,
						},
					},
				})
				if err != nil {
					return _zero, err
				}
				json0 := string(tmpJSON0)
				return json0, nil
			}).(pulumi.StringOutput),
		})
		if err != nil {
			return err
		}
		return nil
	})
}

```

## Import

CodeBuild Resource Policy can be imported using the CodeBuild Resource Policy arn, e.g.,

```sh 

$ pulumi import aws:codebuild/resourcePolicy:ResourcePolicy example arn:aws:codebuild:us-west-2:123456789:report-group/report-group-name

```

func GetResourcePolicy added in v4.34.0 

func GetResourcePolicy(ctx *pulumi.Context,
	name string, id pulumi.IDInput, state *ResourcePolicyState, opts ...pulumi.ResourceOption) (*ResourcePolicy, error)

GetResourcePolicy gets an existing ResourcePolicy resource's state with the given name, ID, and optional state properties that are used to uniquely qualify the lookup (nil if not required).

func NewResourcePolicy added in v4.34.0 

func NewResourcePolicy(ctx *pulumi.Context,
	name string, args *ResourcePolicyArgs, opts ...pulumi.ResourceOption) (*ResourcePolicy, error)

NewResourcePolicy registers a new resource with the given unique name, arguments, and options.

func (*ResourcePolicy) ElementType added in v4.34.0 

func (*ResourcePolicy) ElementType() reflect.Type

func (*ResourcePolicy) ToResourcePolicyOutput added in v4.34.0 

func (i *ResourcePolicy) ToResourcePolicyOutput() ResourcePolicyOutput

func (*ResourcePolicy) ToResourcePolicyOutputWithContext added in v4.34.0 

func (i *ResourcePolicy) ToResourcePolicyOutputWithContext(ctx context.Context) ResourcePolicyOutput

type ResourcePolicyArgs added in v4.34.0 

type ResourcePolicyArgs struct {
	// A JSON-formatted resource policy. For more information, see [Sharing a Projec](https://docs.aws.amazon.com/codebuild/latest/userguide/project-sharing.html#project-sharing-share) and [Sharing a Report Group](https://docs.aws.amazon.com/codebuild/latest/userguide/report-groups-sharing.html#report-groups-sharing-share).
	Policy pulumi.StringInput
	// The ARN of the Project or ReportGroup resource you want to associate with a resource policy.
	ResourceArn pulumi.StringInput
}

The set of arguments for constructing a ResourcePolicy resource.

func (ResourcePolicyArgs) ElementType added in v4.34.0 

func (ResourcePolicyArgs) ElementType() reflect.Type

type ResourcePolicyArray added in v4.34.0 

type ResourcePolicyArray []ResourcePolicyInput

func (ResourcePolicyArray) ElementType added in v4.34.0 

func (ResourcePolicyArray) ElementType() reflect.Type

func (ResourcePolicyArray) ToResourcePolicyArrayOutput added in v4.34.0 

func (i ResourcePolicyArray) ToResourcePolicyArrayOutput() ResourcePolicyArrayOutput

func (ResourcePolicyArray) ToResourcePolicyArrayOutputWithContext added in v4.34.0 

func (i ResourcePolicyArray) ToResourcePolicyArrayOutputWithContext(ctx context.Context) ResourcePolicyArrayOutput

type ResourcePolicyArrayInput added in v4.34.0 

type ResourcePolicyArrayInput interface {
	pulumi.Input

	ToResourcePolicyArrayOutput() ResourcePolicyArrayOutput
	ToResourcePolicyArrayOutputWithContext(context.Context) ResourcePolicyArrayOutput
}

ResourcePolicyArrayInput is an input type that accepts ResourcePolicyArray and ResourcePolicyArrayOutput values. You can construct a concrete instance of `ResourcePolicyArrayInput` via: 

ResourcePolicyArray{ ResourcePolicyArgs{...} }

type ResourcePolicyArrayOutput added in v4.34.0 

type ResourcePolicyArrayOutput struct{ *pulumi.OutputState }

func (ResourcePolicyArrayOutput) ElementType added in v4.34.0 

func (ResourcePolicyArrayOutput) ElementType() reflect.Type

func (ResourcePolicyArrayOutput) Index added in v4.34.0 

func (o ResourcePolicyArrayOutput) Index(i pulumi.IntInput) ResourcePolicyOutput

func (ResourcePolicyArrayOutput) ToResourcePolicyArrayOutput added in v4.34.0 

func (o ResourcePolicyArrayOutput) ToResourcePolicyArrayOutput() ResourcePolicyArrayOutput

func (ResourcePolicyArrayOutput) ToResourcePolicyArrayOutputWithContext added in v4.34.0 

func (o ResourcePolicyArrayOutput) ToResourcePolicyArrayOutputWithContext(ctx context.Context) ResourcePolicyArrayOutput

type ResourcePolicyInput added in v4.34.0 

type ResourcePolicyInput interface {
	pulumi.Input

	ToResourcePolicyOutput() ResourcePolicyOutput
	ToResourcePolicyOutputWithContext(ctx context.Context) ResourcePolicyOutput
}

type ResourcePolicyMap added in v4.34.0 

type ResourcePolicyMap map[string]ResourcePolicyInput

func (ResourcePolicyMap) ElementType added in v4.34.0 

func (ResourcePolicyMap) ElementType() reflect.Type

func (ResourcePolicyMap) ToResourcePolicyMapOutput added in v4.34.0 

func (i ResourcePolicyMap) ToResourcePolicyMapOutput() ResourcePolicyMapOutput

func (ResourcePolicyMap) ToResourcePolicyMapOutputWithContext added in v4.34.0 

func (i ResourcePolicyMap) ToResourcePolicyMapOutputWithContext(ctx context.Context) ResourcePolicyMapOutput

type ResourcePolicyMapInput added in v4.34.0 

type ResourcePolicyMapInput interface {
	pulumi.Input

	ToResourcePolicyMapOutput() ResourcePolicyMapOutput
	ToResourcePolicyMapOutputWithContext(context.Context) ResourcePolicyMapOutput
}

ResourcePolicyMapInput is an input type that accepts ResourcePolicyMap and ResourcePolicyMapOutput values. You can construct a concrete instance of `ResourcePolicyMapInput` via: 

ResourcePolicyMap{ "key": ResourcePolicyArgs{...} }

type ResourcePolicyMapOutput added in v4.34.0 

type ResourcePolicyMapOutput struct{ *pulumi.OutputState }

func (ResourcePolicyMapOutput) ElementType added in v4.34.0 

func (ResourcePolicyMapOutput) ElementType() reflect.Type

func (ResourcePolicyMapOutput) MapIndex added in v4.34.0 

func (o ResourcePolicyMapOutput) MapIndex(k pulumi.StringInput) ResourcePolicyOutput

func (ResourcePolicyMapOutput) ToResourcePolicyMapOutput added in v4.34.0 

func (o ResourcePolicyMapOutput) ToResourcePolicyMapOutput() ResourcePolicyMapOutput

func (ResourcePolicyMapOutput) ToResourcePolicyMapOutputWithContext added in v4.34.0 

func (o ResourcePolicyMapOutput) ToResourcePolicyMapOutputWithContext(ctx context.Context) ResourcePolicyMapOutput

type ResourcePolicyOutput added in v4.34.0 

type ResourcePolicyOutput struct{ *pulumi.OutputState }

func (ResourcePolicyOutput) ElementType added in v4.34.0 

func (ResourcePolicyOutput) ElementType() reflect.Type

func (ResourcePolicyOutput) ToResourcePolicyOutput added in v4.34.0 

func (o ResourcePolicyOutput) ToResourcePolicyOutput() ResourcePolicyOutput

func (ResourcePolicyOutput) ToResourcePolicyOutputWithContext added in v4.34.0 

func (o ResourcePolicyOutput) ToResourcePolicyOutputWithContext(ctx context.Context) ResourcePolicyOutput

type ResourcePolicyState added in v4.34.0 

type ResourcePolicyState struct {
	// A JSON-formatted resource policy. For more information, see [Sharing a Projec](https://docs.aws.amazon.com/codebuild/latest/userguide/project-sharing.html#project-sharing-share) and [Sharing a Report Group](https://docs.aws.amazon.com/codebuild/latest/userguide/report-groups-sharing.html#report-groups-sharing-share).
	Policy pulumi.StringPtrInput
	// The ARN of the Project or ReportGroup resource you want to associate with a resource policy.
	ResourceArn pulumi.StringPtrInput
}

func (ResourcePolicyState) ElementType added in v4.34.0 

func (ResourcePolicyState) ElementType() reflect.Type

type SourceCredential 

type SourceCredential struct {
	pulumi.CustomResourceState

	// The ARN of Source Credential.
	Arn pulumi.StringOutput `pulumi:"arn"`
	// The type of authentication used to connect to a GitHub, GitHub Enterprise, or Bitbucket repository. An OAUTH connection is not supported by the API.
	AuthType pulumi.StringOutput `pulumi:"authType"`
	// The source provider used for this project.
	ServerType pulumi.StringOutput `pulumi:"serverType"`
	// For `GitHub` or `GitHub Enterprise`, this is the personal access token. For `Bitbucket`, this is the app password.
	Token pulumi.StringOutput `pulumi:"token"`
	// The Bitbucket username when the authType is `BASIC_AUTH`. This parameter is not valid for other types of source providers or connections.
	UserName pulumi.StringPtrOutput `pulumi:"userName"`
}

Provides a CodeBuild Source Credentials Resource.

> **NOTE:** [Codebuild only allows a single credential per given server type in a given region](https://docs.aws.amazon.com/cdk/api/v2/docs/aws-cdk-lib.aws_codebuild.GitHubSourceCredentials.html). Therefore, when you define `codebuild.SourceCredential`, `codebuild.Project` resource defined in the same module will use it.

## Example Usage

```go package main

import ( 

"github.com/pulumi/pulumi-aws/sdk/v4/go/aws/codebuild"
"github.com/pulumi/pulumi/sdk/v3/go/pulumi"

) 

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		_, err := codebuild.NewSourceCredential(ctx, "example", &codebuild.SourceCredentialArgs{
			AuthType:   pulumi.String("PERSONAL_ACCESS_TOKEN"),
			ServerType: pulumi.String("GITHUB"),
			Token:      pulumi.String("example"),
		})
		if err != nil {
			return err
		}
		return nil
	})
}

``` ### Bitbucket Server Usage

```go package main

import ( 

"github.com/pulumi/pulumi-aws/sdk/v4/go/aws/codebuild"
"github.com/pulumi/pulumi/sdk/v3/go/pulumi"

) 

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		_, err := codebuild.NewSourceCredential(ctx, "example", &codebuild.SourceCredentialArgs{
			AuthType:   pulumi.String("BASIC_AUTH"),
			ServerType: pulumi.String("BITBUCKET"),
			Token:      pulumi.String("example"),
			UserName:   pulumi.String("test-user"),
		})
		if err != nil {
			return err
		}
		return nil
	})
}

```

## Import

CodeBuild Source Credential can be imported using the CodeBuild Source Credential arn, e.g.,

```sh 

$ pulumi import aws:codebuild/sourceCredential:SourceCredential example arn:aws:codebuild:us-west-2:123456789:token:github

```

func GetSourceCredential 

func GetSourceCredential(ctx *pulumi.Context,
	name string, id pulumi.IDInput, state *SourceCredentialState, opts ...pulumi.ResourceOption) (*SourceCredential, error)

GetSourceCredential gets an existing SourceCredential resource's state with the given name, ID, and optional state properties that are used to uniquely qualify the lookup (nil if not required).

func NewSourceCredential 

func NewSourceCredential(ctx *pulumi.Context,
	name string, args *SourceCredentialArgs, opts ...pulumi.ResourceOption) (*SourceCredential, error)

NewSourceCredential registers a new resource with the given unique name, arguments, and options.

func (*SourceCredential) ElementType 

func (*SourceCredential) ElementType() reflect.Type

func (*SourceCredential) ToSourceCredentialOutput 

func (i *SourceCredential) ToSourceCredentialOutput() SourceCredentialOutput

func (*SourceCredential) ToSourceCredentialOutputWithContext 

func (i *SourceCredential) ToSourceCredentialOutputWithContext(ctx context.Context) SourceCredentialOutput

type SourceCredentialArgs 

type SourceCredentialArgs struct {
	// The type of authentication used to connect to a GitHub, GitHub Enterprise, or Bitbucket repository. An OAUTH connection is not supported by the API.
	AuthType pulumi.StringInput
	// The source provider used for this project.
	ServerType pulumi.StringInput
	// For `GitHub` or `GitHub Enterprise`, this is the personal access token. For `Bitbucket`, this is the app password.
	Token pulumi.StringInput
	// The Bitbucket username when the authType is `BASIC_AUTH`. This parameter is not valid for other types of source providers or connections.
	UserName pulumi.StringPtrInput
}

The set of arguments for constructing a SourceCredential resource.

func (SourceCredentialArgs) ElementType 

func (SourceCredentialArgs) ElementType() reflect.Type

type SourceCredentialArray 

type SourceCredentialArray []SourceCredentialInput

func (SourceCredentialArray) ElementType 

func (SourceCredentialArray) ElementType() reflect.Type

func (SourceCredentialArray) ToSourceCredentialArrayOutput 

func (i SourceCredentialArray) ToSourceCredentialArrayOutput() SourceCredentialArrayOutput

func (SourceCredentialArray) ToSourceCredentialArrayOutputWithContext 

func (i SourceCredentialArray) ToSourceCredentialArrayOutputWithContext(ctx context.Context) SourceCredentialArrayOutput

type SourceCredentialArrayInput 

type SourceCredentialArrayInput interface {
	pulumi.Input

	ToSourceCredentialArrayOutput() SourceCredentialArrayOutput
	ToSourceCredentialArrayOutputWithContext(context.Context) SourceCredentialArrayOutput
}

SourceCredentialArrayInput is an input type that accepts SourceCredentialArray and SourceCredentialArrayOutput values. You can construct a concrete instance of `SourceCredentialArrayInput` via: 

SourceCredentialArray{ SourceCredentialArgs{...} }

type SourceCredentialArrayOutput 

type SourceCredentialArrayOutput struct{ *pulumi.OutputState }

func (SourceCredentialArrayOutput) ElementType 

func (SourceCredentialArrayOutput) ElementType() reflect.Type

func (SourceCredentialArrayOutput) Index 

func (o SourceCredentialArrayOutput) Index(i pulumi.IntInput) SourceCredentialOutput

func (SourceCredentialArrayOutput) ToSourceCredentialArrayOutput 

func (o SourceCredentialArrayOutput) ToSourceCredentialArrayOutput() SourceCredentialArrayOutput

func (SourceCredentialArrayOutput) ToSourceCredentialArrayOutputWithContext 

func (o SourceCredentialArrayOutput) ToSourceCredentialArrayOutputWithContext(ctx context.Context) SourceCredentialArrayOutput

type SourceCredentialInput 

type SourceCredentialInput interface {
	pulumi.Input

	ToSourceCredentialOutput() SourceCredentialOutput
	ToSourceCredentialOutputWithContext(ctx context.Context) SourceCredentialOutput
}

type SourceCredentialMap 

type SourceCredentialMap map[string]SourceCredentialInput

func (SourceCredentialMap) ElementType 

func (SourceCredentialMap) ElementType() reflect.Type

func (SourceCredentialMap) ToSourceCredentialMapOutput 

func (i SourceCredentialMap) ToSourceCredentialMapOutput() SourceCredentialMapOutput

func (SourceCredentialMap) ToSourceCredentialMapOutputWithContext 

func (i SourceCredentialMap) ToSourceCredentialMapOutputWithContext(ctx context.Context) SourceCredentialMapOutput

type SourceCredentialMapInput 

type SourceCredentialMapInput interface {
	pulumi.Input

	ToSourceCredentialMapOutput() SourceCredentialMapOutput
	ToSourceCredentialMapOutputWithContext(context.Context) SourceCredentialMapOutput
}

SourceCredentialMapInput is an input type that accepts SourceCredentialMap and SourceCredentialMapOutput values. You can construct a concrete instance of `SourceCredentialMapInput` via: 

SourceCredentialMap{ "key": SourceCredentialArgs{...} }

type SourceCredentialMapOutput 

type SourceCredentialMapOutput struct{ *pulumi.OutputState }

func (SourceCredentialMapOutput) ElementType 

func (SourceCredentialMapOutput) ElementType() reflect.Type

func (SourceCredentialMapOutput) MapIndex 

func (o SourceCredentialMapOutput) MapIndex(k pulumi.StringInput) SourceCredentialOutput

func (SourceCredentialMapOutput) ToSourceCredentialMapOutput 

func (o SourceCredentialMapOutput) ToSourceCredentialMapOutput() SourceCredentialMapOutput

func (SourceCredentialMapOutput) ToSourceCredentialMapOutputWithContext 

func (o SourceCredentialMapOutput) ToSourceCredentialMapOutputWithContext(ctx context.Context) SourceCredentialMapOutput

type SourceCredentialOutput 

type SourceCredentialOutput struct{ *pulumi.OutputState }

func (SourceCredentialOutput) ElementType 

func (SourceCredentialOutput) ElementType() reflect.Type

func (SourceCredentialOutput) ToSourceCredentialOutput 

func (o SourceCredentialOutput) ToSourceCredentialOutput() SourceCredentialOutput

func (SourceCredentialOutput) ToSourceCredentialOutputWithContext 

func (o SourceCredentialOutput) ToSourceCredentialOutputWithContext(ctx context.Context) SourceCredentialOutput

type SourceCredentialState 

type SourceCredentialState struct {
	// The ARN of Source Credential.
	Arn pulumi.StringPtrInput
	// The type of authentication used to connect to a GitHub, GitHub Enterprise, or Bitbucket repository. An OAUTH connection is not supported by the API.
	AuthType pulumi.StringPtrInput
	// The source provider used for this project.
	ServerType pulumi.StringPtrInput
	// For `GitHub` or `GitHub Enterprise`, this is the personal access token. For `Bitbucket`, this is the app password.
	Token pulumi.StringPtrInput
	// The Bitbucket username when the authType is `BASIC_AUTH`. This parameter is not valid for other types of source providers or connections.
	UserName pulumi.StringPtrInput
}

func (SourceCredentialState) ElementType 

func (SourceCredentialState) ElementType() reflect.Type

type Webhook 

type Webhook struct {
	pulumi.CustomResourceState

	// A regular expression used to determine which branches get built. Default is all branches are built. It is recommended to use `filterGroup` over `branchFilter`.
	BranchFilter pulumi.StringPtrOutput `pulumi:"branchFilter"`
	// The type of build this webhook will trigger. Valid values for this parameter are: `BUILD`, `BUILD_BATCH`.
	BuildType pulumi.StringPtrOutput `pulumi:"buildType"`
	// Information about the webhook's trigger. Filter group blocks are documented below.
	FilterGroups WebhookFilterGroupArrayOutput `pulumi:"filterGroups"`
	// The CodeBuild endpoint where webhook events are sent.
	PayloadUrl pulumi.StringOutput `pulumi:"payloadUrl"`
	// The name of the build project.
	ProjectName pulumi.StringOutput `pulumi:"projectName"`
	// The secret token of the associated repository. Not returned by the CodeBuild API for all source types.
	Secret pulumi.StringOutput `pulumi:"secret"`
	// The URL to the webhook.
	Url pulumi.StringOutput `pulumi:"url"`
}

Manages a CodeBuild webhook, which is an endpoint accepted by the CodeBuild service to trigger builds from source code repositories. Depending on the source type of the CodeBuild project, the CodeBuild service may also automatically create and delete the actual repository webhook as well.

## Example Usage ### Bitbucket and GitHub

When working with [Bitbucket](https://bitbucket.org) and [GitHub](https://github.com) source CodeBuild webhooks, the CodeBuild service will automatically create (on `codebuild.Webhook` resource creation) and delete (on `codebuild.Webhook` resource deletion) the Bitbucket/GitHub repository webhook using its granted OAuth permissions. This behavior cannot be controlled by this provider.

> **Note:** The AWS account that this provider uses to create this resource *must* have authorized CodeBuild to access Bitbucket/GitHub's OAuth API in each applicable region. This is a manual step that must be done *before* creating webhooks with this resource. If OAuth is not configured, AWS will return an error similar to `ResourceNotFoundException: Could not find access token for server type github`. More information can be found in the CodeBuild User Guide for [Bitbucket](https://docs.aws.amazon.com/codebuild/latest/userguide/sample-bitbucket-pull-request.html) and [GitHub](https://docs.aws.amazon.com/codebuild/latest/userguide/sample-github-pull-request.html).

> **Note:** Further managing the automatically created Bitbucket/GitHub webhook with the `bitbucketHook`/`githubRepositoryWebhook` resource is only possible with importing that resource after creation of the `codebuild.Webhook` resource. The CodeBuild API does not ever provide the `secret` attribute for the `codebuild.Webhook` resource in this scenario.

```go package main

import ( 

"github.com/pulumi/pulumi-aws/sdk/v4/go/aws/codebuild"
"github.com/pulumi/pulumi/sdk/v3/go/pulumi"

) 

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		_, err := codebuild.NewWebhook(ctx, "example", &codebuild.WebhookArgs{
			ProjectName: pulumi.Any(aws_codebuild_project.Example.Name),
			BuildType:   pulumi.String("BUILD"),
			FilterGroups: codebuild.WebhookFilterGroupArray{
				&codebuild.WebhookFilterGroupArgs{
					Filters: codebuild.WebhookFilterGroupFilterArray{
						&codebuild.WebhookFilterGroupFilterArgs{
							Type:    pulumi.String("EVENT"),
							Pattern: pulumi.String("PUSH"),
						},
						&codebuild.WebhookFilterGroupFilterArgs{
							Type:    pulumi.String("HEAD_REF"),
							Pattern: pulumi.String("master"),
						},
					},
				},
			},
		})
		if err != nil {
			return err
		}
		return nil
	})
}

``` ### GitHub Enterprise

When working with [GitHub Enterprise](https://enterprise.github.com/) source CodeBuild webhooks, the GHE repository webhook must be separately managed (e.g., manually or with the `githubRepositoryWebhook` resource).

More information creating webhooks with GitHub Enterprise can be found in the [CodeBuild User Guide](https://docs.aws.amazon.com/codebuild/latest/userguide/sample-github-enterprise.html).

```go package main

import ( 

"github.com/pulumi/pulumi-aws/sdk/v4/go/aws/codebuild"
"github.com/pulumi/pulumi-github/sdk/v4/go/github"
"github.com/pulumi/pulumi/sdk/v3/go/pulumi"

) 

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		exampleWebhook, err := codebuild.NewWebhook(ctx, "exampleWebhook", &codebuild.WebhookArgs{
			ProjectName: pulumi.Any(aws_codebuild_project.Example.Name),
		})
		if err != nil {
			return err
		}
		_, err = github.NewRepositoryWebhook(ctx, "exampleRepositoryWebhook", &github.RepositoryWebhookArgs{
			Active: pulumi.Bool(true),
			Events: pulumi.StringArray{
				pulumi.String("push"),
			},
			Repository: pulumi.Any(github_repository.Example.Name),
			Configuration: &RepositoryWebhookConfigurationArgs{
				Url:         exampleWebhook.PayloadUrl,
				Secret:      exampleWebhook.Secret,
				ContentType: pulumi.String("json"),
				InsecureSsl: pulumi.Bool(false),
			},
		})
		if err != nil {
			return err
		}
		return nil
	})
}

```

## Import

CodeBuild Webhooks can be imported using the CodeBuild Project name, e.g.,

```sh 

$ pulumi import aws:codebuild/webhook:Webhook example MyProjectName

```

func GetWebhook 

func GetWebhook(ctx *pulumi.Context,
	name string, id pulumi.IDInput, state *WebhookState, opts ...pulumi.ResourceOption) (*Webhook, error)

GetWebhook gets an existing Webhook resource's state with the given name, ID, and optional state properties that are used to uniquely qualify the lookup (nil if not required).

func NewWebhook 

func NewWebhook(ctx *pulumi.Context,
	name string, args *WebhookArgs, opts ...pulumi.ResourceOption) (*Webhook, error)

NewWebhook registers a new resource with the given unique name, arguments, and options.

func (*Webhook) ElementType 

func (*Webhook) ElementType() reflect.Type

func (*Webhook) ToWebhookOutput 

func (i *Webhook) ToWebhookOutput() WebhookOutput

func (*Webhook) ToWebhookOutputWithContext 

func (i *Webhook) ToWebhookOutputWithContext(ctx context.Context) WebhookOutput

type WebhookArgs 

type WebhookArgs struct {
	// A regular expression used to determine which branches get built. Default is all branches are built. It is recommended to use `filterGroup` over `branchFilter`.
	BranchFilter pulumi.StringPtrInput
	// The type of build this webhook will trigger. Valid values for this parameter are: `BUILD`, `BUILD_BATCH`.
	BuildType pulumi.StringPtrInput
	// Information about the webhook's trigger. Filter group blocks are documented below.
	FilterGroups WebhookFilterGroupArrayInput
	// The name of the build project.
	ProjectName pulumi.StringInput
}

The set of arguments for constructing a Webhook resource.

func (WebhookArgs) ElementType 

func (WebhookArgs) ElementType() reflect.Type

type WebhookArray 

type WebhookArray []WebhookInput

func (WebhookArray) ElementType 

func (WebhookArray) ElementType() reflect.Type

func (WebhookArray) ToWebhookArrayOutput 

func (i WebhookArray) ToWebhookArrayOutput() WebhookArrayOutput

func (WebhookArray) ToWebhookArrayOutputWithContext 

func (i WebhookArray) ToWebhookArrayOutputWithContext(ctx context.Context) WebhookArrayOutput

type WebhookArrayInput 

type WebhookArrayInput interface {
	pulumi.Input

	ToWebhookArrayOutput() WebhookArrayOutput
	ToWebhookArrayOutputWithContext(context.Context) WebhookArrayOutput
}

WebhookArrayInput is an input type that accepts WebhookArray and WebhookArrayOutput values. You can construct a concrete instance of `WebhookArrayInput` via: 

WebhookArray{ WebhookArgs{...} }

type WebhookArrayOutput 

type WebhookArrayOutput struct{ *pulumi.OutputState }

func (WebhookArrayOutput) ElementType 

func (WebhookArrayOutput) ElementType() reflect.Type

func (WebhookArrayOutput) Index 

func (o WebhookArrayOutput) Index(i pulumi.IntInput) WebhookOutput

func (WebhookArrayOutput) ToWebhookArrayOutput 

func (o WebhookArrayOutput) ToWebhookArrayOutput() WebhookArrayOutput

func (WebhookArrayOutput) ToWebhookArrayOutputWithContext 

func (o WebhookArrayOutput) ToWebhookArrayOutputWithContext(ctx context.Context) WebhookArrayOutput

type WebhookFilterGroup 

type WebhookFilterGroup struct {
	// A webhook filter for the group. Filter blocks are documented below.
	Filters []WebhookFilterGroupFilter `pulumi:"filters"`
}

type WebhookFilterGroupArgs 

type WebhookFilterGroupArgs struct {
	// A webhook filter for the group. Filter blocks are documented below.
	Filters WebhookFilterGroupFilterArrayInput `pulumi:"filters"`
}

func (WebhookFilterGroupArgs) ElementType 

func (WebhookFilterGroupArgs) ElementType() reflect.Type

func (WebhookFilterGroupArgs) ToWebhookFilterGroupOutput 

func (i WebhookFilterGroupArgs) ToWebhookFilterGroupOutput() WebhookFilterGroupOutput

func (WebhookFilterGroupArgs) ToWebhookFilterGroupOutputWithContext 

func (i WebhookFilterGroupArgs) ToWebhookFilterGroupOutputWithContext(ctx context.Context) WebhookFilterGroupOutput

type WebhookFilterGroupArray 

type WebhookFilterGroupArray []WebhookFilterGroupInput

func (WebhookFilterGroupArray) ElementType 

func (WebhookFilterGroupArray) ElementType() reflect.Type

func (WebhookFilterGroupArray) ToWebhookFilterGroupArrayOutput 

func (i WebhookFilterGroupArray) ToWebhookFilterGroupArrayOutput() WebhookFilterGroupArrayOutput

func (WebhookFilterGroupArray) ToWebhookFilterGroupArrayOutputWithContext 

func (i WebhookFilterGroupArray) ToWebhookFilterGroupArrayOutputWithContext(ctx context.Context) WebhookFilterGroupArrayOutput

type WebhookFilterGroupArrayInput 

type WebhookFilterGroupArrayInput interface {
	pulumi.Input

	ToWebhookFilterGroupArrayOutput() WebhookFilterGroupArrayOutput
	ToWebhookFilterGroupArrayOutputWithContext(context.Context) WebhookFilterGroupArrayOutput
}

WebhookFilterGroupArrayInput is an input type that accepts WebhookFilterGroupArray and WebhookFilterGroupArrayOutput values. You can construct a concrete instance of `WebhookFilterGroupArrayInput` via: 

WebhookFilterGroupArray{ WebhookFilterGroupArgs{...} }

type WebhookFilterGroupArrayOutput 

type WebhookFilterGroupArrayOutput struct{ *pulumi.OutputState }

func (WebhookFilterGroupArrayOutput) ElementType 

func (WebhookFilterGroupArrayOutput) ElementType() reflect.Type

func (WebhookFilterGroupArrayOutput) Index 

func (o WebhookFilterGroupArrayOutput) Index(i pulumi.IntInput) WebhookFilterGroupOutput

func (WebhookFilterGroupArrayOutput) ToWebhookFilterGroupArrayOutput 

func (o WebhookFilterGroupArrayOutput) ToWebhookFilterGroupArrayOutput() WebhookFilterGroupArrayOutput

func (WebhookFilterGroupArrayOutput) ToWebhookFilterGroupArrayOutputWithContext 

func (o WebhookFilterGroupArrayOutput) ToWebhookFilterGroupArrayOutputWithContext(ctx context.Context) WebhookFilterGroupArrayOutput

type WebhookFilterGroupFilter 

type WebhookFilterGroupFilter struct {
	// If set to `true`, the specified filter does *not* trigger a build. Defaults to `false`.
	ExcludeMatchedPattern *bool `pulumi:"excludeMatchedPattern"`
	// For a filter that uses `EVENT` type, a comma-separated string that specifies one event: `PUSH`, `PULL_REQUEST_CREATED`, `PULL_REQUEST_UPDATED`, `PULL_REQUEST_REOPENED`. `PULL_REQUEST_MERGED` works with GitHub & GitHub Enterprise only. For a filter that uses any of the other filter types, a regular expression.
	Pattern string `pulumi:"pattern"`
	// The webhook filter group's type. Valid values for this parameter are: `EVENT`, `BASE_REF`, `HEAD_REF`, `ACTOR_ACCOUNT_ID`, `FILE_PATH`, `COMMIT_MESSAGE`. At least one filter group must specify `EVENT` as its type.
	Type string `pulumi:"type"`
}

type WebhookFilterGroupFilterArgs 

type WebhookFilterGroupFilterArgs struct {
	// If set to `true`, the specified filter does *not* trigger a build. Defaults to `false`.
	ExcludeMatchedPattern pulumi.BoolPtrInput `pulumi:"excludeMatchedPattern"`
	// For a filter that uses `EVENT` type, a comma-separated string that specifies one event: `PUSH`, `PULL_REQUEST_CREATED`, `PULL_REQUEST_UPDATED`, `PULL_REQUEST_REOPENED`. `PULL_REQUEST_MERGED` works with GitHub & GitHub Enterprise only. For a filter that uses any of the other filter types, a regular expression.
	Pattern pulumi.StringInput `pulumi:"pattern"`
	// The webhook filter group's type. Valid values for this parameter are: `EVENT`, `BASE_REF`, `HEAD_REF`, `ACTOR_ACCOUNT_ID`, `FILE_PATH`, `COMMIT_MESSAGE`. At least one filter group must specify `EVENT` as its type.
	Type pulumi.StringInput `pulumi:"type"`
}

func (WebhookFilterGroupFilterArgs) ElementType 

func (WebhookFilterGroupFilterArgs) ElementType() reflect.Type

func (WebhookFilterGroupFilterArgs) ToWebhookFilterGroupFilterOutput 

func (i WebhookFilterGroupFilterArgs) ToWebhookFilterGroupFilterOutput() WebhookFilterGroupFilterOutput

func (WebhookFilterGroupFilterArgs) ToWebhookFilterGroupFilterOutputWithContext 

func (i WebhookFilterGroupFilterArgs) ToWebhookFilterGroupFilterOutputWithContext(ctx context.Context) WebhookFilterGroupFilterOutput

type WebhookFilterGroupFilterArray 

type WebhookFilterGroupFilterArray []WebhookFilterGroupFilterInput

func (WebhookFilterGroupFilterArray) ElementType 

func (WebhookFilterGroupFilterArray) ElementType() reflect.Type

func (WebhookFilterGroupFilterArray) ToWebhookFilterGroupFilterArrayOutput 

func (i WebhookFilterGroupFilterArray) ToWebhookFilterGroupFilterArrayOutput() WebhookFilterGroupFilterArrayOutput

func (WebhookFilterGroupFilterArray) ToWebhookFilterGroupFilterArrayOutputWithContext 

func (i WebhookFilterGroupFilterArray) ToWebhookFilterGroupFilterArrayOutputWithContext(ctx context.Context) WebhookFilterGroupFilterArrayOutput

type WebhookFilterGroupFilterArrayInput 

type WebhookFilterGroupFilterArrayInput interface {
	pulumi.Input

	ToWebhookFilterGroupFilterArrayOutput() WebhookFilterGroupFilterArrayOutput
	ToWebhookFilterGroupFilterArrayOutputWithContext(context.Context) WebhookFilterGroupFilterArrayOutput
}

WebhookFilterGroupFilterArrayInput is an input type that accepts WebhookFilterGroupFilterArray and WebhookFilterGroupFilterArrayOutput values. You can construct a concrete instance of `WebhookFilterGroupFilterArrayInput` via: 

WebhookFilterGroupFilterArray{ WebhookFilterGroupFilterArgs{...} }

type WebhookFilterGroupFilterArrayOutput 

type WebhookFilterGroupFilterArrayOutput struct{ *pulumi.OutputState }

func (WebhookFilterGroupFilterArrayOutput) ElementType 

func (WebhookFilterGroupFilterArrayOutput) ElementType() reflect.Type

func (WebhookFilterGroupFilterArrayOutput) Index 

func (o WebhookFilterGroupFilterArrayOutput) Index(i pulumi.IntInput) WebhookFilterGroupFilterOutput

func (WebhookFilterGroupFilterArrayOutput) ToWebhookFilterGroupFilterArrayOutput 

func (o WebhookFilterGroupFilterArrayOutput) ToWebhookFilterGroupFilterArrayOutput() WebhookFilterGroupFilterArrayOutput

func (WebhookFilterGroupFilterArrayOutput) ToWebhookFilterGroupFilterArrayOutputWithContext 

func (o WebhookFilterGroupFilterArrayOutput) ToWebhookFilterGroupFilterArrayOutputWithContext(ctx context.Context) WebhookFilterGroupFilterArrayOutput

type WebhookFilterGroupFilterInput 

type WebhookFilterGroupFilterInput interface {
	pulumi.Input

	ToWebhookFilterGroupFilterOutput() WebhookFilterGroupFilterOutput
	ToWebhookFilterGroupFilterOutputWithContext(context.Context) WebhookFilterGroupFilterOutput
}

WebhookFilterGroupFilterInput is an input type that accepts WebhookFilterGroupFilterArgs and WebhookFilterGroupFilterOutput values. You can construct a concrete instance of `WebhookFilterGroupFilterInput` via: 

WebhookFilterGroupFilterArgs{...}

type WebhookFilterGroupFilterOutput 

type WebhookFilterGroupFilterOutput struct{ *pulumi.OutputState }

func (WebhookFilterGroupFilterOutput) ElementType 

func (WebhookFilterGroupFilterOutput) ElementType() reflect.Type

func (WebhookFilterGroupFilterOutput) ExcludeMatchedPattern 

func (o WebhookFilterGroupFilterOutput) ExcludeMatchedPattern() pulumi.BoolPtrOutput

If set to `true`, the specified filter does *not* trigger a build. Defaults to `false`.

func (WebhookFilterGroupFilterOutput) Pattern 

func (o WebhookFilterGroupFilterOutput) Pattern() pulumi.StringOutput

For a filter that uses `EVENT` type, a comma-separated string that specifies one event: `PUSH`, `PULL_REQUEST_CREATED`, `PULL_REQUEST_UPDATED`, `PULL_REQUEST_REOPENED`. `PULL_REQUEST_MERGED` works with GitHub & GitHub Enterprise only. For a filter that uses any of the other filter types, a regular expression.

func (WebhookFilterGroupFilterOutput) ToWebhookFilterGroupFilterOutput 

func (o WebhookFilterGroupFilterOutput) ToWebhookFilterGroupFilterOutput() WebhookFilterGroupFilterOutput

func (WebhookFilterGroupFilterOutput) ToWebhookFilterGroupFilterOutputWithContext 

func (o WebhookFilterGroupFilterOutput) ToWebhookFilterGroupFilterOutputWithContext(ctx context.Context) WebhookFilterGroupFilterOutput

func (WebhookFilterGroupFilterOutput) Type 

func (o WebhookFilterGroupFilterOutput) Type() pulumi.StringOutput

The webhook filter group's type. Valid values for this parameter are: `EVENT`, `BASE_REF`, `HEAD_REF`, `ACTOR_ACCOUNT_ID`, `FILE_PATH`, `COMMIT_MESSAGE`. At least one filter group must specify `EVENT` as its type.

type WebhookFilterGroupInput 

type WebhookFilterGroupInput interface {
	pulumi.Input

	ToWebhookFilterGroupOutput() WebhookFilterGroupOutput
	ToWebhookFilterGroupOutputWithContext(context.Context) WebhookFilterGroupOutput
}

WebhookFilterGroupInput is an input type that accepts WebhookFilterGroupArgs and WebhookFilterGroupOutput values. You can construct a concrete instance of `WebhookFilterGroupInput` via: 

WebhookFilterGroupArgs{...}

type WebhookFilterGroupOutput 

type WebhookFilterGroupOutput struct{ *pulumi.OutputState }

func (WebhookFilterGroupOutput) ElementType 

func (WebhookFilterGroupOutput) ElementType() reflect.Type

func (WebhookFilterGroupOutput) Filters 

func (o WebhookFilterGroupOutput) Filters() WebhookFilterGroupFilterArrayOutput

A webhook filter for the group. Filter blocks are documented below.

func (WebhookFilterGroupOutput) ToWebhookFilterGroupOutput 

func (o WebhookFilterGroupOutput) ToWebhookFilterGroupOutput() WebhookFilterGroupOutput

func (WebhookFilterGroupOutput) ToWebhookFilterGroupOutputWithContext 

func (o WebhookFilterGroupOutput) ToWebhookFilterGroupOutputWithContext(ctx context.Context) WebhookFilterGroupOutput

type WebhookInput 

type WebhookInput interface {
	pulumi.Input

	ToWebhookOutput() WebhookOutput
	ToWebhookOutputWithContext(ctx context.Context) WebhookOutput
}

type WebhookMap 

type WebhookMap map[string]WebhookInput

func (WebhookMap) ElementType 

func (WebhookMap) ElementType() reflect.Type

func (WebhookMap) ToWebhookMapOutput 

func (i WebhookMap) ToWebhookMapOutput() WebhookMapOutput

func (WebhookMap) ToWebhookMapOutputWithContext 

func (i WebhookMap) ToWebhookMapOutputWithContext(ctx context.Context) WebhookMapOutput

type WebhookMapInput 

type WebhookMapInput interface {
	pulumi.Input

	ToWebhookMapOutput() WebhookMapOutput
	ToWebhookMapOutputWithContext(context.Context) WebhookMapOutput
}

WebhookMapInput is an input type that accepts WebhookMap and WebhookMapOutput values. You can construct a concrete instance of `WebhookMapInput` via: 

WebhookMap{ "key": WebhookArgs{...} }

type WebhookMapOutput 

type WebhookMapOutput struct{ *pulumi.OutputState }

func (WebhookMapOutput) ElementType 

func (WebhookMapOutput) ElementType() reflect.Type

func (WebhookMapOutput) MapIndex 

func (o WebhookMapOutput) MapIndex(k pulumi.StringInput) WebhookOutput

func (WebhookMapOutput) ToWebhookMapOutput 

func (o WebhookMapOutput) ToWebhookMapOutput() WebhookMapOutput

func (WebhookMapOutput) ToWebhookMapOutputWithContext 

func (o WebhookMapOutput) ToWebhookMapOutputWithContext(ctx context.Context) WebhookMapOutput

type WebhookOutput 

type WebhookOutput struct{ *pulumi.OutputState }

func (WebhookOutput) ElementType 

func (WebhookOutput) ElementType() reflect.Type

func (WebhookOutput) ToWebhookOutput 

func (o WebhookOutput) ToWebhookOutput() WebhookOutput

func (WebhookOutput) ToWebhookOutputWithContext 

func (o WebhookOutput) ToWebhookOutputWithContext(ctx context.Context) WebhookOutput

type WebhookState 

type WebhookState struct {
	// A regular expression used to determine which branches get built. Default is all branches are built. It is recommended to use `filterGroup` over `branchFilter`.
	BranchFilter pulumi.StringPtrInput
	// The type of build this webhook will trigger. Valid values for this parameter are: `BUILD`, `BUILD_BATCH`.
	BuildType pulumi.StringPtrInput
	// Information about the webhook's trigger. Filter group blocks are documented below.
	FilterGroups WebhookFilterGroupArrayInput
	// The CodeBuild endpoint where webhook events are sent.
	PayloadUrl pulumi.StringPtrInput
	// The name of the build project.
	ProjectName pulumi.StringPtrInput
	// The secret token of the associated repository. Not returned by the CodeBuild API for all source types.
	Secret pulumi.StringPtrInput
	// The URL to the webhook.
	Url pulumi.StringPtrInput
}

func (WebhookState) ElementType 

func (WebhookState) ElementType() reflect.Type

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.