codebuild

package
v2.13.1 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Jul 22, 2020 License: Apache-2.0 Imports: 4 Imported by: 0

Documentation

Index

Constants

This section is empty.

Variables

This section is empty.

Functions

This section is empty.

Types

type Project 

type Project struct {
	pulumi.CustomResourceState

	// The ARN of the CodeBuild project.
	Arn pulumi.StringOutput `pulumi:"arn"`
	// Information about the project's build output artifacts. Artifact blocks are documented below.
	Artifacts ProjectArtifactsOutput `pulumi:"artifacts"`
	// Generates a publicly-accessible URL for the projects build badge. Available as `badgeUrl` attribute when enabled.
	BadgeEnabled pulumi.BoolPtrOutput `pulumi:"badgeEnabled"`
	// The URL of the build badge when `badgeEnabled` is enabled.
	BadgeUrl pulumi.StringOutput `pulumi:"badgeUrl"`
	// How long in minutes, from 5 to 480 (8 hours), for AWS CodeBuild to wait until timing out any related build that does not get marked as completed. The default is 60 minutes.
	BuildTimeout pulumi.IntPtrOutput `pulumi:"buildTimeout"`
	// Information about the cache storage for the project. Cache blocks are documented below.
	Cache ProjectCachePtrOutput `pulumi:"cache"`
	// A short description of the project.
	Description pulumi.StringOutput `pulumi:"description"`
	// The AWS Key Management Service (AWS KMS) customer master key (CMK) to be used for encrypting the build project's build output artifacts.
	EncryptionKey pulumi.StringOutput `pulumi:"encryptionKey"`
	// Information about the project's build environment. Environment blocks are documented below.
	Environment ProjectEnvironmentOutput `pulumi:"environment"`
	// Configuration for the builds to store log data to CloudWatch or S3.
	LogsConfig ProjectLogsConfigPtrOutput `pulumi:"logsConfig"`
	// The projects name.
	Name pulumi.StringOutput `pulumi:"name"`
	// How long in minutes, from 5 to 480 (8 hours), a build is allowed to be queued before it times out. The default is 8 hours.
	QueuedTimeout pulumi.IntPtrOutput `pulumi:"queuedTimeout"`
	// A set of secondary artifacts to be used inside the build. Secondary artifacts blocks are documented below.
	SecondaryArtifacts ProjectSecondaryArtifactArrayOutput `pulumi:"secondaryArtifacts"`
	// A set of secondary sources to be used inside the build. Secondary sources blocks are documented below.
	SecondarySources ProjectSecondarySourceArrayOutput `pulumi:"secondarySources"`
	// The Amazon Resource Name (ARN) of the AWS Identity and Access Management (IAM) role that enables AWS CodeBuild to interact with dependent AWS services on behalf of the AWS account.
	ServiceRole pulumi.StringOutput `pulumi:"serviceRole"`
	// Information about the project's input source code. Source blocks are documented below.
	Source ProjectSourceOutput `pulumi:"source"`
	// A version of the build input to be built for this project. If not specified, the latest version is used.
	SourceVersion pulumi.StringPtrOutput `pulumi:"sourceVersion"`
	// A map of tags to assign to the resource.
	Tags pulumi.StringMapOutput `pulumi:"tags"`
	// Configuration for the builds to run inside a VPC. VPC config blocks are documented below.
	VpcConfig ProjectVpcConfigPtrOutput `pulumi:"vpcConfig"`
}

Provides a CodeBuild Project resource. See also the `codebuild.Webhook` resource, which manages the webhook to the source (e.g. the "rebuild every time a code change is pushed" option in the CodeBuild web console).

func GetProject 

func GetProject(ctx *pulumi.Context,
	name string, id pulumi.IDInput, state *ProjectState, opts ...pulumi.ResourceOption) (*Project, error)

GetProject gets an existing Project resource's state with the given name, ID, and optional state properties that are used to uniquely qualify the lookup (nil if not required).

func NewProject 

func NewProject(ctx *pulumi.Context,
	name string, args *ProjectArgs, opts ...pulumi.ResourceOption) (*Project, error)

NewProject registers a new resource with the given unique name, arguments, and options.

type ProjectArgs 

type ProjectArgs struct {
	// Information about the project's build output artifacts. Artifact blocks are documented below.
	Artifacts ProjectArtifactsInput
	// Generates a publicly-accessible URL for the projects build badge. Available as `badgeUrl` attribute when enabled.
	BadgeEnabled pulumi.BoolPtrInput
	// How long in minutes, from 5 to 480 (8 hours), for AWS CodeBuild to wait until timing out any related build that does not get marked as completed. The default is 60 minutes.
	BuildTimeout pulumi.IntPtrInput
	// Information about the cache storage for the project. Cache blocks are documented below.
	Cache ProjectCachePtrInput
	// A short description of the project.
	Description pulumi.StringPtrInput
	// The AWS Key Management Service (AWS KMS) customer master key (CMK) to be used for encrypting the build project's build output artifacts.
	EncryptionKey pulumi.StringPtrInput
	// Information about the project's build environment. Environment blocks are documented below.
	Environment ProjectEnvironmentInput
	// Configuration for the builds to store log data to CloudWatch or S3.
	LogsConfig ProjectLogsConfigPtrInput
	// The projects name.
	Name pulumi.StringPtrInput
	// How long in minutes, from 5 to 480 (8 hours), a build is allowed to be queued before it times out. The default is 8 hours.
	QueuedTimeout pulumi.IntPtrInput
	// A set of secondary artifacts to be used inside the build. Secondary artifacts blocks are documented below.
	SecondaryArtifacts ProjectSecondaryArtifactArrayInput
	// A set of secondary sources to be used inside the build. Secondary sources blocks are documented below.
	SecondarySources ProjectSecondarySourceArrayInput
	// The Amazon Resource Name (ARN) of the AWS Identity and Access Management (IAM) role that enables AWS CodeBuild to interact with dependent AWS services on behalf of the AWS account.
	ServiceRole pulumi.StringInput
	// Information about the project's input source code. Source blocks are documented below.
	Source ProjectSourceInput
	// A version of the build input to be built for this project. If not specified, the latest version is used.
	SourceVersion pulumi.StringPtrInput
	// A map of tags to assign to the resource.
	Tags pulumi.StringMapInput
	// Configuration for the builds to run inside a VPC. VPC config blocks are documented below.
	VpcConfig ProjectVpcConfigPtrInput
}

The set of arguments for constructing a Project resource.

func (ProjectArgs) ElementType 

func (ProjectArgs) ElementType() reflect.Type

type ProjectArtifacts 

type ProjectArtifacts struct {
	// The artifact identifier. Must be the same specified inside AWS CodeBuild buildspec.
	ArtifactIdentifier *string `pulumi:"artifactIdentifier"`
	// If set to true, output artifacts will not be encrypted. If `type` is set to `NO_ARTIFACTS` then this value will be ignored. Defaults to `false`.
	EncryptionDisabled *bool `pulumi:"encryptionDisabled"`
	// Information about the build output artifact location. If `type` is set to `CODEPIPELINE` or `NO_ARTIFACTS` then this value will be ignored. If `type` is set to `S3`, this is the name of the output bucket.
	Location *string `pulumi:"location"`
	// The name of the project. If `type` is set to `S3`, this is the name of the output artifact object
	Name *string `pulumi:"name"`
	// The namespace to use in storing build artifacts. If `type` is set to `S3`, then valid values for this parameter are: `BUILD_ID` or `NONE`.
	NamespaceType *string `pulumi:"namespaceType"`
	// If set to true, a name specified in the build spec file overrides the artifact name.
	OverrideArtifactName *bool `pulumi:"overrideArtifactName"`
	// The type of build output artifact to create. If `type` is set to `S3`, valid values for this parameter are: `NONE` or `ZIP`
	Packaging *string `pulumi:"packaging"`
	// If `type` is set to `S3`, this is the path to the output artifact
	Path *string `pulumi:"path"`
	// The build output artifact's type. Valid values for this parameter are: `CODEPIPELINE`, `NO_ARTIFACTS` or `S3`.
	Type string `pulumi:"type"`
}

type ProjectArtifactsArgs 

type ProjectArtifactsArgs struct {
	// The artifact identifier. Must be the same specified inside AWS CodeBuild buildspec.
	ArtifactIdentifier pulumi.StringPtrInput `pulumi:"artifactIdentifier"`
	// If set to true, output artifacts will not be encrypted. If `type` is set to `NO_ARTIFACTS` then this value will be ignored. Defaults to `false`.
	EncryptionDisabled pulumi.BoolPtrInput `pulumi:"encryptionDisabled"`
	// Information about the build output artifact location. If `type` is set to `CODEPIPELINE` or `NO_ARTIFACTS` then this value will be ignored. If `type` is set to `S3`, this is the name of the output bucket.
	Location pulumi.StringPtrInput `pulumi:"location"`
	// The name of the project. If `type` is set to `S3`, this is the name of the output artifact object
	Name pulumi.StringPtrInput `pulumi:"name"`
	// The namespace to use in storing build artifacts. If `type` is set to `S3`, then valid values for this parameter are: `BUILD_ID` or `NONE`.
	NamespaceType pulumi.StringPtrInput `pulumi:"namespaceType"`
	// If set to true, a name specified in the build spec file overrides the artifact name.
	OverrideArtifactName pulumi.BoolPtrInput `pulumi:"overrideArtifactName"`
	// The type of build output artifact to create. If `type` is set to `S3`, valid values for this parameter are: `NONE` or `ZIP`
	Packaging pulumi.StringPtrInput `pulumi:"packaging"`
	// If `type` is set to `S3`, this is the path to the output artifact
	Path pulumi.StringPtrInput `pulumi:"path"`
	// The build output artifact's type. Valid values for this parameter are: `CODEPIPELINE`, `NO_ARTIFACTS` or `S3`.
	Type pulumi.StringInput `pulumi:"type"`
}

func (ProjectArtifactsArgs) ElementType 

func (ProjectArtifactsArgs) ElementType() reflect.Type

func (ProjectArtifactsArgs) ToProjectArtifactsOutput 

func (i ProjectArtifactsArgs) ToProjectArtifactsOutput() ProjectArtifactsOutput

func (ProjectArtifactsArgs) ToProjectArtifactsOutputWithContext 

func (i ProjectArtifactsArgs) ToProjectArtifactsOutputWithContext(ctx context.Context) ProjectArtifactsOutput

func (ProjectArtifactsArgs) ToProjectArtifactsPtrOutput 

func (i ProjectArtifactsArgs) ToProjectArtifactsPtrOutput() ProjectArtifactsPtrOutput

func (ProjectArtifactsArgs) ToProjectArtifactsPtrOutputWithContext 

func (i ProjectArtifactsArgs) ToProjectArtifactsPtrOutputWithContext(ctx context.Context) ProjectArtifactsPtrOutput

type ProjectArtifactsInput 

type ProjectArtifactsInput interface {
	pulumi.Input

	ToProjectArtifactsOutput() ProjectArtifactsOutput
	ToProjectArtifactsOutputWithContext(context.Context) ProjectArtifactsOutput
}

ProjectArtifactsInput is an input type that accepts ProjectArtifactsArgs and ProjectArtifactsOutput values. You can construct a concrete instance of `ProjectArtifactsInput` via: 

ProjectArtifactsArgs{...}

type ProjectArtifactsOutput 

type ProjectArtifactsOutput struct{ *pulumi.OutputState }

func (ProjectArtifactsOutput) ArtifactIdentifier 

func (o ProjectArtifactsOutput) ArtifactIdentifier() pulumi.StringPtrOutput

The artifact identifier. Must be the same specified inside AWS CodeBuild buildspec.

func (ProjectArtifactsOutput) ElementType 

func (ProjectArtifactsOutput) ElementType() reflect.Type

func (ProjectArtifactsOutput) EncryptionDisabled 

func (o ProjectArtifactsOutput) EncryptionDisabled() pulumi.BoolPtrOutput

If set to true, output artifacts will not be encrypted. If `type` is set to `NO_ARTIFACTS` then this value will be ignored. Defaults to `false`.

func (ProjectArtifactsOutput) Location 

func (o ProjectArtifactsOutput) Location() pulumi.StringPtrOutput

Information about the build output artifact location. If `type` is set to `CODEPIPELINE` or `NO_ARTIFACTS` then this value will be ignored. If `type` is set to `S3`, this is the name of the output bucket.

func (ProjectArtifactsOutput) Name 

func (o ProjectArtifactsOutput) Name() pulumi.StringPtrOutput

The name of the project. If `type` is set to `S3`, this is the name of the output artifact object

func (ProjectArtifactsOutput) NamespaceType 

func (o ProjectArtifactsOutput) NamespaceType() pulumi.StringPtrOutput

The namespace to use in storing build artifacts. If `type` is set to `S3`, then valid values for this parameter are: `BUILD_ID` or `NONE`.

func (ProjectArtifactsOutput) OverrideArtifactName 

func (o ProjectArtifactsOutput) OverrideArtifactName() pulumi.BoolPtrOutput

If set to true, a name specified in the build spec file overrides the artifact name.

func (ProjectArtifactsOutput) Packaging 

func (o ProjectArtifactsOutput) Packaging() pulumi.StringPtrOutput

The type of build output artifact to create. If `type` is set to `S3`, valid values for this parameter are: `NONE` or `ZIP`

func (ProjectArtifactsOutput) Path 

func (o ProjectArtifactsOutput) Path() pulumi.StringPtrOutput

If `type` is set to `S3`, this is the path to the output artifact

func (ProjectArtifactsOutput) ToProjectArtifactsOutput 

func (o ProjectArtifactsOutput) ToProjectArtifactsOutput() ProjectArtifactsOutput

func (ProjectArtifactsOutput) ToProjectArtifactsOutputWithContext 

func (o ProjectArtifactsOutput) ToProjectArtifactsOutputWithContext(ctx context.Context) ProjectArtifactsOutput

func (ProjectArtifactsOutput) ToProjectArtifactsPtrOutput 

func (o ProjectArtifactsOutput) ToProjectArtifactsPtrOutput() ProjectArtifactsPtrOutput

func (ProjectArtifactsOutput) ToProjectArtifactsPtrOutputWithContext 

func (o ProjectArtifactsOutput) ToProjectArtifactsPtrOutputWithContext(ctx context.Context) ProjectArtifactsPtrOutput

func (ProjectArtifactsOutput) Type 

func (o ProjectArtifactsOutput) Type() pulumi.StringOutput

The build output artifact's type. Valid values for this parameter are: `CODEPIPELINE`, `NO_ARTIFACTS` or `S3`.

type ProjectArtifactsPtrInput 

type ProjectArtifactsPtrInput interface {
	pulumi.Input

	ToProjectArtifactsPtrOutput() ProjectArtifactsPtrOutput
	ToProjectArtifactsPtrOutputWithContext(context.Context) ProjectArtifactsPtrOutput
}

ProjectArtifactsPtrInput is an input type that accepts ProjectArtifactsArgs, ProjectArtifactsPtr and ProjectArtifactsPtrOutput values. You can construct a concrete instance of `ProjectArtifactsPtrInput` via: 

        ProjectArtifactsArgs{...}

or:

        nil

func ProjectArtifactsPtr 

func ProjectArtifactsPtr(v *ProjectArtifactsArgs) ProjectArtifactsPtrInput

type ProjectArtifactsPtrOutput 

type ProjectArtifactsPtrOutput struct{ *pulumi.OutputState }

func (ProjectArtifactsPtrOutput) ArtifactIdentifier 

func (o ProjectArtifactsPtrOutput) ArtifactIdentifier() pulumi.StringPtrOutput

The artifact identifier. Must be the same specified inside AWS CodeBuild buildspec.

func (ProjectArtifactsPtrOutput) Elem 

func (o ProjectArtifactsPtrOutput) Elem() ProjectArtifactsOutput

func (ProjectArtifactsPtrOutput) ElementType 

func (ProjectArtifactsPtrOutput) ElementType() reflect.Type

func (ProjectArtifactsPtrOutput) EncryptionDisabled 

func (o ProjectArtifactsPtrOutput) EncryptionDisabled() pulumi.BoolPtrOutput

If set to true, output artifacts will not be encrypted. If `type` is set to `NO_ARTIFACTS` then this value will be ignored. Defaults to `false`.

func (ProjectArtifactsPtrOutput) Location 

func (o ProjectArtifactsPtrOutput) Location() pulumi.StringPtrOutput

Information about the build output artifact location. If `type` is set to `CODEPIPELINE` or `NO_ARTIFACTS` then this value will be ignored. If `type` is set to `S3`, this is the name of the output bucket.

func (ProjectArtifactsPtrOutput) Name 

func (o ProjectArtifactsPtrOutput) Name() pulumi.StringPtrOutput

The name of the project. If `type` is set to `S3`, this is the name of the output artifact object

func (ProjectArtifactsPtrOutput) NamespaceType 

func (o ProjectArtifactsPtrOutput) NamespaceType() pulumi.StringPtrOutput

The namespace to use in storing build artifacts. If `type` is set to `S3`, then valid values for this parameter are: `BUILD_ID` or `NONE`.

func (ProjectArtifactsPtrOutput) OverrideArtifactName 

func (o ProjectArtifactsPtrOutput) OverrideArtifactName() pulumi.BoolPtrOutput

If set to true, a name specified in the build spec file overrides the artifact name.

func (ProjectArtifactsPtrOutput) Packaging 

func (o ProjectArtifactsPtrOutput) Packaging() pulumi.StringPtrOutput

The type of build output artifact to create. If `type` is set to `S3`, valid values for this parameter are: `NONE` or `ZIP`

func (ProjectArtifactsPtrOutput) Path 

func (o ProjectArtifactsPtrOutput) Path() pulumi.StringPtrOutput

If `type` is set to `S3`, this is the path to the output artifact

func (ProjectArtifactsPtrOutput) ToProjectArtifactsPtrOutput 

func (o ProjectArtifactsPtrOutput) ToProjectArtifactsPtrOutput() ProjectArtifactsPtrOutput

func (ProjectArtifactsPtrOutput) ToProjectArtifactsPtrOutputWithContext 

func (o ProjectArtifactsPtrOutput) ToProjectArtifactsPtrOutputWithContext(ctx context.Context) ProjectArtifactsPtrOutput

func (ProjectArtifactsPtrOutput) Type 

func (o ProjectArtifactsPtrOutput) Type() pulumi.StringPtrOutput

The build output artifact's type. Valid values for this parameter are: `CODEPIPELINE`, `NO_ARTIFACTS` or `S3`.

type ProjectCache 

type ProjectCache struct {
	// The location where the AWS CodeBuild project stores cached resources. For type `S3` the value must be a valid S3 bucket name/prefix.
	Location *string `pulumi:"location"`
	// Specifies settings that AWS CodeBuild uses to store and reuse build dependencies. Valid values:  `LOCAL_SOURCE_CACHE`, `LOCAL_DOCKER_LAYER_CACHE`, and `LOCAL_CUSTOM_CACHE`
	Modes []string `pulumi:"modes"`
	// The type of storage that will be used for the AWS CodeBuild project cache. Valid values: `NO_CACHE`, `LOCAL`, and `S3`. Defaults to `NO_CACHE`.
	Type *string `pulumi:"type"`
}

type ProjectCacheArgs 

type ProjectCacheArgs struct {
	// The location where the AWS CodeBuild project stores cached resources. For type `S3` the value must be a valid S3 bucket name/prefix.
	Location pulumi.StringPtrInput `pulumi:"location"`
	// Specifies settings that AWS CodeBuild uses to store and reuse build dependencies. Valid values:  `LOCAL_SOURCE_CACHE`, `LOCAL_DOCKER_LAYER_CACHE`, and `LOCAL_CUSTOM_CACHE`
	Modes pulumi.StringArrayInput `pulumi:"modes"`
	// The type of storage that will be used for the AWS CodeBuild project cache. Valid values: `NO_CACHE`, `LOCAL`, and `S3`. Defaults to `NO_CACHE`.
	Type pulumi.StringPtrInput `pulumi:"type"`
}

func (ProjectCacheArgs) ElementType 

func (ProjectCacheArgs) ElementType() reflect.Type

func (ProjectCacheArgs) ToProjectCacheOutput 

func (i ProjectCacheArgs) ToProjectCacheOutput() ProjectCacheOutput

func (ProjectCacheArgs) ToProjectCacheOutputWithContext 

func (i ProjectCacheArgs) ToProjectCacheOutputWithContext(ctx context.Context) ProjectCacheOutput

func (ProjectCacheArgs) ToProjectCachePtrOutput 

func (i ProjectCacheArgs) ToProjectCachePtrOutput() ProjectCachePtrOutput

func (ProjectCacheArgs) ToProjectCachePtrOutputWithContext 

func (i ProjectCacheArgs) ToProjectCachePtrOutputWithContext(ctx context.Context) ProjectCachePtrOutput

type ProjectCacheInput 

type ProjectCacheInput interface {
	pulumi.Input

	ToProjectCacheOutput() ProjectCacheOutput
	ToProjectCacheOutputWithContext(context.Context) ProjectCacheOutput
}

ProjectCacheInput is an input type that accepts ProjectCacheArgs and ProjectCacheOutput values. You can construct a concrete instance of `ProjectCacheInput` via: 

ProjectCacheArgs{...}

type ProjectCacheOutput 

type ProjectCacheOutput struct{ *pulumi.OutputState }

func (ProjectCacheOutput) ElementType 

func (ProjectCacheOutput) ElementType() reflect.Type

func (ProjectCacheOutput) Location 

func (o ProjectCacheOutput) Location() pulumi.StringPtrOutput

The location where the AWS CodeBuild project stores cached resources. For type `S3` the value must be a valid S3 bucket name/prefix.

func (ProjectCacheOutput) Modes 

func (o ProjectCacheOutput) Modes() pulumi.StringArrayOutput

Specifies settings that AWS CodeBuild uses to store and reuse build dependencies. Valid values: `LOCAL_SOURCE_CACHE`, `LOCAL_DOCKER_LAYER_CACHE`, and `LOCAL_CUSTOM_CACHE`

func (ProjectCacheOutput) ToProjectCacheOutput 

func (o ProjectCacheOutput) ToProjectCacheOutput() ProjectCacheOutput

func (ProjectCacheOutput) ToProjectCacheOutputWithContext 

func (o ProjectCacheOutput) ToProjectCacheOutputWithContext(ctx context.Context) ProjectCacheOutput

func (ProjectCacheOutput) ToProjectCachePtrOutput 

func (o ProjectCacheOutput) ToProjectCachePtrOutput() ProjectCachePtrOutput

func (ProjectCacheOutput) ToProjectCachePtrOutputWithContext 

func (o ProjectCacheOutput) ToProjectCachePtrOutputWithContext(ctx context.Context) ProjectCachePtrOutput

func (ProjectCacheOutput) Type 

func (o ProjectCacheOutput) Type() pulumi.StringPtrOutput

The type of storage that will be used for the AWS CodeBuild project cache. Valid values: `NO_CACHE`, `LOCAL`, and `S3`. Defaults to `NO_CACHE`.

type ProjectCachePtrInput 

type ProjectCachePtrInput interface {
	pulumi.Input

	ToProjectCachePtrOutput() ProjectCachePtrOutput
	ToProjectCachePtrOutputWithContext(context.Context) ProjectCachePtrOutput
}

ProjectCachePtrInput is an input type that accepts ProjectCacheArgs, ProjectCachePtr and ProjectCachePtrOutput values. You can construct a concrete instance of `ProjectCachePtrInput` via: 

        ProjectCacheArgs{...}

or:

        nil

func ProjectCachePtr 

func ProjectCachePtr(v *ProjectCacheArgs) ProjectCachePtrInput

type ProjectCachePtrOutput 

type ProjectCachePtrOutput struct{ *pulumi.OutputState }

func (ProjectCachePtrOutput) Elem 

func (o ProjectCachePtrOutput) Elem() ProjectCacheOutput

func (ProjectCachePtrOutput) ElementType 

func (ProjectCachePtrOutput) ElementType() reflect.Type

func (ProjectCachePtrOutput) Location 

func (o ProjectCachePtrOutput) Location() pulumi.StringPtrOutput

The location where the AWS CodeBuild project stores cached resources. For type `S3` the value must be a valid S3 bucket name/prefix.

func (ProjectCachePtrOutput) Modes 

func (o ProjectCachePtrOutput) Modes() pulumi.StringArrayOutput

Specifies settings that AWS CodeBuild uses to store and reuse build dependencies. Valid values: `LOCAL_SOURCE_CACHE`, `LOCAL_DOCKER_LAYER_CACHE`, and `LOCAL_CUSTOM_CACHE`

func (ProjectCachePtrOutput) ToProjectCachePtrOutput 

func (o ProjectCachePtrOutput) ToProjectCachePtrOutput() ProjectCachePtrOutput

func (ProjectCachePtrOutput) ToProjectCachePtrOutputWithContext 

func (o ProjectCachePtrOutput) ToProjectCachePtrOutputWithContext(ctx context.Context) ProjectCachePtrOutput

func (ProjectCachePtrOutput) Type 

func (o ProjectCachePtrOutput) Type() pulumi.StringPtrOutput

The type of storage that will be used for the AWS CodeBuild project cache. Valid values: `NO_CACHE`, `LOCAL`, and `S3`. Defaults to `NO_CACHE`.

type ProjectEnvironment 

type ProjectEnvironment struct {
	// The ARN of the S3 bucket, path prefix and object key that contains the PEM-encoded certificate.
	Certificate *string `pulumi:"certificate"`
	// Information about the compute resources the build project will use. Available values for this parameter are: `BUILD_GENERAL1_SMALL`, `BUILD_GENERAL1_MEDIUM`, `BUILD_GENERAL1_LARGE` or `BUILD_GENERAL1_2XLARGE`. `BUILD_GENERAL1_SMALL` is only valid if `type` is set to `LINUX_CONTAINER`. When `type` is set to `LINUX_GPU_CONTAINER`, `computeType` need to be `BUILD_GENERAL1_LARGE`.
	ComputeType string `pulumi:"computeType"`
	// A set of environment variables to make available to builds for this build project.
	EnvironmentVariables []ProjectEnvironmentEnvironmentVariable `pulumi:"environmentVariables"`
	// The Docker image to use for this build project. Valid values include [Docker images provided by CodeBuild](https://docs.aws.amazon.com/codebuild/latest/userguide/build-env-ref-available.html) (e.g `aws/codebuild/standard:2.0`), [Docker Hub images](https://hub.docker.com/) (e.g. `nginx:latest`), and full Docker repository URIs such as those for ECR (e.g. `137112412989.dkr.ecr.us-west-2.amazonaws.com/amazonlinux:latest`).
	Image string `pulumi:"image"`
	// The type of credentials AWS CodeBuild uses to pull images in your build. Available values for this parameter are `CODEBUILD` or `SERVICE_ROLE`. When you use a cross-account or private registry image, you must use SERVICE_ROLE credentials. When you use an AWS CodeBuild curated image, you must use CODEBUILD credentials. Default to `CODEBUILD`
	ImagePullCredentialsType *string `pulumi:"imagePullCredentialsType"`
	// If set to true, enables running the Docker daemon inside a Docker container. Defaults to `false`.
	PrivilegedMode *bool `pulumi:"privilegedMode"`
	// Information about credentials for access to a private Docker registry. Registry Credential config blocks are documented below.
	RegistryCredential *ProjectEnvironmentRegistryCredential `pulumi:"registryCredential"`
	// The type of build environment to use for related builds. Available values are: `LINUX_CONTAINER`, `LINUX_GPU_CONTAINER`, `WINDOWS_CONTAINER` or `ARM_CONTAINER`.
	Type string `pulumi:"type"`
}

type ProjectEnvironmentArgs 

type ProjectEnvironmentArgs struct {
	// The ARN of the S3 bucket, path prefix and object key that contains the PEM-encoded certificate.
	Certificate pulumi.StringPtrInput `pulumi:"certificate"`
	// Information about the compute resources the build project will use. Available values for this parameter are: `BUILD_GENERAL1_SMALL`, `BUILD_GENERAL1_MEDIUM`, `BUILD_GENERAL1_LARGE` or `BUILD_GENERAL1_2XLARGE`. `BUILD_GENERAL1_SMALL` is only valid if `type` is set to `LINUX_CONTAINER`. When `type` is set to `LINUX_GPU_CONTAINER`, `computeType` need to be `BUILD_GENERAL1_LARGE`.
	ComputeType pulumi.StringInput `pulumi:"computeType"`
	// A set of environment variables to make available to builds for this build project.
	EnvironmentVariables ProjectEnvironmentEnvironmentVariableArrayInput `pulumi:"environmentVariables"`
	// The Docker image to use for this build project. Valid values include [Docker images provided by CodeBuild](https://docs.aws.amazon.com/codebuild/latest/userguide/build-env-ref-available.html) (e.g `aws/codebuild/standard:2.0`), [Docker Hub images](https://hub.docker.com/) (e.g. `nginx:latest`), and full Docker repository URIs such as those for ECR (e.g. `137112412989.dkr.ecr.us-west-2.amazonaws.com/amazonlinux:latest`).
	Image pulumi.StringInput `pulumi:"image"`
	// The type of credentials AWS CodeBuild uses to pull images in your build. Available values for this parameter are `CODEBUILD` or `SERVICE_ROLE`. When you use a cross-account or private registry image, you must use SERVICE_ROLE credentials. When you use an AWS CodeBuild curated image, you must use CODEBUILD credentials. Default to `CODEBUILD`
	ImagePullCredentialsType pulumi.StringPtrInput `pulumi:"imagePullCredentialsType"`
	// If set to true, enables running the Docker daemon inside a Docker container. Defaults to `false`.
	PrivilegedMode pulumi.BoolPtrInput `pulumi:"privilegedMode"`
	// Information about credentials for access to a private Docker registry. Registry Credential config blocks are documented below.
	RegistryCredential ProjectEnvironmentRegistryCredentialPtrInput `pulumi:"registryCredential"`
	// The type of build environment to use for related builds. Available values are: `LINUX_CONTAINER`, `LINUX_GPU_CONTAINER`, `WINDOWS_CONTAINER` or `ARM_CONTAINER`.
	Type pulumi.StringInput `pulumi:"type"`
}

func (ProjectEnvironmentArgs) ElementType 

func (ProjectEnvironmentArgs) ElementType() reflect.Type

func (ProjectEnvironmentArgs) ToProjectEnvironmentOutput 

func (i ProjectEnvironmentArgs) ToProjectEnvironmentOutput() ProjectEnvironmentOutput

func (ProjectEnvironmentArgs) ToProjectEnvironmentOutputWithContext 

func (i ProjectEnvironmentArgs) ToProjectEnvironmentOutputWithContext(ctx context.Context) ProjectEnvironmentOutput

func (ProjectEnvironmentArgs) ToProjectEnvironmentPtrOutput 

func (i ProjectEnvironmentArgs) ToProjectEnvironmentPtrOutput() ProjectEnvironmentPtrOutput

func (ProjectEnvironmentArgs) ToProjectEnvironmentPtrOutputWithContext 

func (i ProjectEnvironmentArgs) ToProjectEnvironmentPtrOutputWithContext(ctx context.Context) ProjectEnvironmentPtrOutput

type ProjectEnvironmentEnvironmentVariable 

type ProjectEnvironmentEnvironmentVariable struct {
	// The environment variable's name or key.
	Name string `pulumi:"name"`
	// The type of environment variable. Valid values: `PARAMETER_STORE`, `PLAINTEXT`.
	Type *string `pulumi:"type"`
	// The environment variable's value.
	Value string `pulumi:"value"`
}

type ProjectEnvironmentEnvironmentVariableArgs 

type ProjectEnvironmentEnvironmentVariableArgs struct {
	// The environment variable's name or key.
	Name pulumi.StringInput `pulumi:"name"`
	// The type of environment variable. Valid values: `PARAMETER_STORE`, `PLAINTEXT`.
	Type pulumi.StringPtrInput `pulumi:"type"`
	// The environment variable's value.
	Value pulumi.StringInput `pulumi:"value"`
}

func (ProjectEnvironmentEnvironmentVariableArgs) ElementType 

func (ProjectEnvironmentEnvironmentVariableArgs) ElementType() reflect.Type

func (ProjectEnvironmentEnvironmentVariableArgs) ToProjectEnvironmentEnvironmentVariableOutput 

func (i ProjectEnvironmentEnvironmentVariableArgs) ToProjectEnvironmentEnvironmentVariableOutput() ProjectEnvironmentEnvironmentVariableOutput

func (ProjectEnvironmentEnvironmentVariableArgs) ToProjectEnvironmentEnvironmentVariableOutputWithContext 

func (i ProjectEnvironmentEnvironmentVariableArgs) ToProjectEnvironmentEnvironmentVariableOutputWithContext(ctx context.Context) ProjectEnvironmentEnvironmentVariableOutput

type ProjectEnvironmentEnvironmentVariableArray 

type ProjectEnvironmentEnvironmentVariableArray []ProjectEnvironmentEnvironmentVariableInput

func (ProjectEnvironmentEnvironmentVariableArray) ElementType 

func (ProjectEnvironmentEnvironmentVariableArray) ElementType() reflect.Type

func (ProjectEnvironmentEnvironmentVariableArray) ToProjectEnvironmentEnvironmentVariableArrayOutput 

func (i ProjectEnvironmentEnvironmentVariableArray) ToProjectEnvironmentEnvironmentVariableArrayOutput() ProjectEnvironmentEnvironmentVariableArrayOutput

func (ProjectEnvironmentEnvironmentVariableArray) ToProjectEnvironmentEnvironmentVariableArrayOutputWithContext 

func (i ProjectEnvironmentEnvironmentVariableArray) ToProjectEnvironmentEnvironmentVariableArrayOutputWithContext(ctx context.Context) ProjectEnvironmentEnvironmentVariableArrayOutput

type ProjectEnvironmentEnvironmentVariableArrayInput 

type ProjectEnvironmentEnvironmentVariableArrayInput interface {
	pulumi.Input

	ToProjectEnvironmentEnvironmentVariableArrayOutput() ProjectEnvironmentEnvironmentVariableArrayOutput
	ToProjectEnvironmentEnvironmentVariableArrayOutputWithContext(context.Context) ProjectEnvironmentEnvironmentVariableArrayOutput
}

ProjectEnvironmentEnvironmentVariableArrayInput is an input type that accepts ProjectEnvironmentEnvironmentVariableArray and ProjectEnvironmentEnvironmentVariableArrayOutput values. You can construct a concrete instance of `ProjectEnvironmentEnvironmentVariableArrayInput` via: 

ProjectEnvironmentEnvironmentVariableArray{ ProjectEnvironmentEnvironmentVariableArgs{...} }

type ProjectEnvironmentEnvironmentVariableArrayOutput 

type ProjectEnvironmentEnvironmentVariableArrayOutput struct{ *pulumi.OutputState }

func (ProjectEnvironmentEnvironmentVariableArrayOutput) ElementType 

func (ProjectEnvironmentEnvironmentVariableArrayOutput) ElementType() reflect.Type

func (ProjectEnvironmentEnvironmentVariableArrayOutput) Index 

func (o ProjectEnvironmentEnvironmentVariableArrayOutput) Index(i pulumi.IntInput) ProjectEnvironmentEnvironmentVariableOutput

func (ProjectEnvironmentEnvironmentVariableArrayOutput) ToProjectEnvironmentEnvironmentVariableArrayOutput 

func (o ProjectEnvironmentEnvironmentVariableArrayOutput) ToProjectEnvironmentEnvironmentVariableArrayOutput() ProjectEnvironmentEnvironmentVariableArrayOutput

func (ProjectEnvironmentEnvironmentVariableArrayOutput) ToProjectEnvironmentEnvironmentVariableArrayOutputWithContext 

func (o ProjectEnvironmentEnvironmentVariableArrayOutput) ToProjectEnvironmentEnvironmentVariableArrayOutputWithContext(ctx context.Context) ProjectEnvironmentEnvironmentVariableArrayOutput

type ProjectEnvironmentEnvironmentVariableInput 

type ProjectEnvironmentEnvironmentVariableInput interface {
	pulumi.Input

	ToProjectEnvironmentEnvironmentVariableOutput() ProjectEnvironmentEnvironmentVariableOutput
	ToProjectEnvironmentEnvironmentVariableOutputWithContext(context.Context) ProjectEnvironmentEnvironmentVariableOutput
}

ProjectEnvironmentEnvironmentVariableInput is an input type that accepts ProjectEnvironmentEnvironmentVariableArgs and ProjectEnvironmentEnvironmentVariableOutput values. You can construct a concrete instance of `ProjectEnvironmentEnvironmentVariableInput` via: 

ProjectEnvironmentEnvironmentVariableArgs{...}

type ProjectEnvironmentEnvironmentVariableOutput 

type ProjectEnvironmentEnvironmentVariableOutput struct{ *pulumi.OutputState }

func (ProjectEnvironmentEnvironmentVariableOutput) ElementType 

func (ProjectEnvironmentEnvironmentVariableOutput) ElementType() reflect.Type

func (ProjectEnvironmentEnvironmentVariableOutput) Name 

func (o ProjectEnvironmentEnvironmentVariableOutput) Name() pulumi.StringOutput

The environment variable's name or key.

func (ProjectEnvironmentEnvironmentVariableOutput) ToProjectEnvironmentEnvironmentVariableOutput 

func (o ProjectEnvironmentEnvironmentVariableOutput) ToProjectEnvironmentEnvironmentVariableOutput() ProjectEnvironmentEnvironmentVariableOutput

func (ProjectEnvironmentEnvironmentVariableOutput) ToProjectEnvironmentEnvironmentVariableOutputWithContext 

func (o ProjectEnvironmentEnvironmentVariableOutput) ToProjectEnvironmentEnvironmentVariableOutputWithContext(ctx context.Context) ProjectEnvironmentEnvironmentVariableOutput

func (ProjectEnvironmentEnvironmentVariableOutput) Type 

func (o ProjectEnvironmentEnvironmentVariableOutput) Type() pulumi.StringPtrOutput

The type of environment variable. Valid values: `PARAMETER_STORE`, `PLAINTEXT`.

func (ProjectEnvironmentEnvironmentVariableOutput) Value 

func (o ProjectEnvironmentEnvironmentVariableOutput) Value() pulumi.StringOutput

The environment variable's value.

type ProjectEnvironmentInput 

type ProjectEnvironmentInput interface {
	pulumi.Input

	ToProjectEnvironmentOutput() ProjectEnvironmentOutput
	ToProjectEnvironmentOutputWithContext(context.Context) ProjectEnvironmentOutput
}

ProjectEnvironmentInput is an input type that accepts ProjectEnvironmentArgs and ProjectEnvironmentOutput values. You can construct a concrete instance of `ProjectEnvironmentInput` via: 

ProjectEnvironmentArgs{...}

type ProjectEnvironmentOutput 

type ProjectEnvironmentOutput struct{ *pulumi.OutputState }

func (ProjectEnvironmentOutput) Certificate 

func (o ProjectEnvironmentOutput) Certificate() pulumi.StringPtrOutput

The ARN of the S3 bucket, path prefix and object key that contains the PEM-encoded certificate.

func (ProjectEnvironmentOutput) ComputeType 

func (o ProjectEnvironmentOutput) ComputeType() pulumi.StringOutput

Information about the compute resources the build project will use. Available values for this parameter are: `BUILD_GENERAL1_SMALL`, `BUILD_GENERAL1_MEDIUM`, `BUILD_GENERAL1_LARGE` or `BUILD_GENERAL1_2XLARGE`. `BUILD_GENERAL1_SMALL` is only valid if `type` is set to `LINUX_CONTAINER`. When `type` is set to `LINUX_GPU_CONTAINER`, `computeType` need to be `BUILD_GENERAL1_LARGE`.

func (ProjectEnvironmentOutput) ElementType 

func (ProjectEnvironmentOutput) ElementType() reflect.Type

func (ProjectEnvironmentOutput) EnvironmentVariables 

func (o ProjectEnvironmentOutput) EnvironmentVariables() ProjectEnvironmentEnvironmentVariableArrayOutput

A set of environment variables to make available to builds for this build project.

func (ProjectEnvironmentOutput) Image 

func (o ProjectEnvironmentOutput) Image() pulumi.StringOutput

The Docker image to use for this build project. Valid values include [Docker images provided by CodeBuild](https://docs.aws.amazon.com/codebuild/latest/userguide/build-env-ref-available.html) (e.g `aws/codebuild/standard:2.0`), [Docker Hub images](https://hub.docker.com/) (e.g. `nginx:latest`), and full Docker repository URIs such as those for ECR (e.g. `137112412989.dkr.ecr.us-west-2.amazonaws.com/amazonlinux:latest`).

func (ProjectEnvironmentOutput) ImagePullCredentialsType 

func (o ProjectEnvironmentOutput) ImagePullCredentialsType() pulumi.StringPtrOutput

The type of credentials AWS CodeBuild uses to pull images in your build. Available values for this parameter are `CODEBUILD` or `SERVICE_ROLE`. When you use a cross-account or private registry image, you must use SERVICE_ROLE credentials. When you use an AWS CodeBuild curated image, you must use CODEBUILD credentials. Default to `CODEBUILD`

func (ProjectEnvironmentOutput) PrivilegedMode 

func (o ProjectEnvironmentOutput) PrivilegedMode() pulumi.BoolPtrOutput

If set to true, enables running the Docker daemon inside a Docker container. Defaults to `false`.

func (ProjectEnvironmentOutput) RegistryCredential 

func (o ProjectEnvironmentOutput) RegistryCredential() ProjectEnvironmentRegistryCredentialPtrOutput

Information about credentials for access to a private Docker registry. Registry Credential config blocks are documented below.

func (ProjectEnvironmentOutput) ToProjectEnvironmentOutput 

func (o ProjectEnvironmentOutput) ToProjectEnvironmentOutput() ProjectEnvironmentOutput

func (ProjectEnvironmentOutput) ToProjectEnvironmentOutputWithContext 

func (o ProjectEnvironmentOutput) ToProjectEnvironmentOutputWithContext(ctx context.Context) ProjectEnvironmentOutput

func (ProjectEnvironmentOutput) ToProjectEnvironmentPtrOutput 

func (o ProjectEnvironmentOutput) ToProjectEnvironmentPtrOutput() ProjectEnvironmentPtrOutput

func (ProjectEnvironmentOutput) ToProjectEnvironmentPtrOutputWithContext 

func (o ProjectEnvironmentOutput) ToProjectEnvironmentPtrOutputWithContext(ctx context.Context) ProjectEnvironmentPtrOutput

func (ProjectEnvironmentOutput) Type 

func (o ProjectEnvironmentOutput) Type() pulumi.StringOutput

The type of build environment to use for related builds. Available values are: `LINUX_CONTAINER`, `LINUX_GPU_CONTAINER`, `WINDOWS_CONTAINER` or `ARM_CONTAINER`.

type ProjectEnvironmentPtrInput 

type ProjectEnvironmentPtrInput interface {
	pulumi.Input

	ToProjectEnvironmentPtrOutput() ProjectEnvironmentPtrOutput
	ToProjectEnvironmentPtrOutputWithContext(context.Context) ProjectEnvironmentPtrOutput
}

ProjectEnvironmentPtrInput is an input type that accepts ProjectEnvironmentArgs, ProjectEnvironmentPtr and ProjectEnvironmentPtrOutput values. You can construct a concrete instance of `ProjectEnvironmentPtrInput` via: 

        ProjectEnvironmentArgs{...}

or:

        nil

func ProjectEnvironmentPtr 

func ProjectEnvironmentPtr(v *ProjectEnvironmentArgs) ProjectEnvironmentPtrInput

type ProjectEnvironmentPtrOutput 

type ProjectEnvironmentPtrOutput struct{ *pulumi.OutputState }

func (ProjectEnvironmentPtrOutput) Certificate 

func (o ProjectEnvironmentPtrOutput) Certificate() pulumi.StringPtrOutput

The ARN of the S3 bucket, path prefix and object key that contains the PEM-encoded certificate.

func (ProjectEnvironmentPtrOutput) ComputeType 

func (o ProjectEnvironmentPtrOutput) ComputeType() pulumi.StringPtrOutput

Information about the compute resources the build project will use. Available values for this parameter are: `BUILD_GENERAL1_SMALL`, `BUILD_GENERAL1_MEDIUM`, `BUILD_GENERAL1_LARGE` or `BUILD_GENERAL1_2XLARGE`. `BUILD_GENERAL1_SMALL` is only valid if `type` is set to `LINUX_CONTAINER`. When `type` is set to `LINUX_GPU_CONTAINER`, `computeType` need to be `BUILD_GENERAL1_LARGE`.

func (ProjectEnvironmentPtrOutput) Elem 

func (o ProjectEnvironmentPtrOutput) Elem() ProjectEnvironmentOutput

func (ProjectEnvironmentPtrOutput) ElementType 

func (ProjectEnvironmentPtrOutput) ElementType() reflect.Type

func (ProjectEnvironmentPtrOutput) EnvironmentVariables 

func (o ProjectEnvironmentPtrOutput) EnvironmentVariables() ProjectEnvironmentEnvironmentVariableArrayOutput

A set of environment variables to make available to builds for this build project.

func (ProjectEnvironmentPtrOutput) Image 

func (o ProjectEnvironmentPtrOutput) Image() pulumi.StringPtrOutput

The Docker image to use for this build project. Valid values include [Docker images provided by CodeBuild](https://docs.aws.amazon.com/codebuild/latest/userguide/build-env-ref-available.html) (e.g `aws/codebuild/standard:2.0`), [Docker Hub images](https://hub.docker.com/) (e.g. `nginx:latest`), and full Docker repository URIs such as those for ECR (e.g. `137112412989.dkr.ecr.us-west-2.amazonaws.com/amazonlinux:latest`).

func (ProjectEnvironmentPtrOutput) ImagePullCredentialsType 

func (o ProjectEnvironmentPtrOutput) ImagePullCredentialsType() pulumi.StringPtrOutput

The type of credentials AWS CodeBuild uses to pull images in your build. Available values for this parameter are `CODEBUILD` or `SERVICE_ROLE`. When you use a cross-account or private registry image, you must use SERVICE_ROLE credentials. When you use an AWS CodeBuild curated image, you must use CODEBUILD credentials. Default to `CODEBUILD`

func (ProjectEnvironmentPtrOutput) PrivilegedMode 

func (o ProjectEnvironmentPtrOutput) PrivilegedMode() pulumi.BoolPtrOutput

If set to true, enables running the Docker daemon inside a Docker container. Defaults to `false`.

func (ProjectEnvironmentPtrOutput) RegistryCredential 

func (o ProjectEnvironmentPtrOutput) RegistryCredential() ProjectEnvironmentRegistryCredentialPtrOutput

Information about credentials for access to a private Docker registry. Registry Credential config blocks are documented below.

func (ProjectEnvironmentPtrOutput) ToProjectEnvironmentPtrOutput 

func (o ProjectEnvironmentPtrOutput) ToProjectEnvironmentPtrOutput() ProjectEnvironmentPtrOutput

func (ProjectEnvironmentPtrOutput) ToProjectEnvironmentPtrOutputWithContext 

func (o ProjectEnvironmentPtrOutput) ToProjectEnvironmentPtrOutputWithContext(ctx context.Context) ProjectEnvironmentPtrOutput

func (ProjectEnvironmentPtrOutput) Type 

func (o ProjectEnvironmentPtrOutput) Type() pulumi.StringPtrOutput

The type of build environment to use for related builds. Available values are: `LINUX_CONTAINER`, `LINUX_GPU_CONTAINER`, `WINDOWS_CONTAINER` or `ARM_CONTAINER`.

type ProjectEnvironmentRegistryCredential 

type ProjectEnvironmentRegistryCredential struct {
	// The Amazon Resource Name (ARN) or name of credentials created using AWS Secrets Manager.
	Credential string `pulumi:"credential"`
	// The service that created the credentials to access a private Docker registry. The valid value, SECRETS_MANAGER, is for AWS Secrets Manager.
	CredentialProvider string `pulumi:"credentialProvider"`
}

type ProjectEnvironmentRegistryCredentialArgs 

type ProjectEnvironmentRegistryCredentialArgs struct {
	// The Amazon Resource Name (ARN) or name of credentials created using AWS Secrets Manager.
	Credential pulumi.StringInput `pulumi:"credential"`
	// The service that created the credentials to access a private Docker registry. The valid value, SECRETS_MANAGER, is for AWS Secrets Manager.
	CredentialProvider pulumi.StringInput `pulumi:"credentialProvider"`
}

func (ProjectEnvironmentRegistryCredentialArgs) ElementType 

func (ProjectEnvironmentRegistryCredentialArgs) ElementType() reflect.Type

func (ProjectEnvironmentRegistryCredentialArgs) ToProjectEnvironmentRegistryCredentialOutput 

func (i ProjectEnvironmentRegistryCredentialArgs) ToProjectEnvironmentRegistryCredentialOutput() ProjectEnvironmentRegistryCredentialOutput

func (ProjectEnvironmentRegistryCredentialArgs) ToProjectEnvironmentRegistryCredentialOutputWithContext 

func (i ProjectEnvironmentRegistryCredentialArgs) ToProjectEnvironmentRegistryCredentialOutputWithContext(ctx context.Context) ProjectEnvironmentRegistryCredentialOutput

func (ProjectEnvironmentRegistryCredentialArgs) ToProjectEnvironmentRegistryCredentialPtrOutput 

func (i ProjectEnvironmentRegistryCredentialArgs) ToProjectEnvironmentRegistryCredentialPtrOutput() ProjectEnvironmentRegistryCredentialPtrOutput

func (ProjectEnvironmentRegistryCredentialArgs) ToProjectEnvironmentRegistryCredentialPtrOutputWithContext 

func (i ProjectEnvironmentRegistryCredentialArgs) ToProjectEnvironmentRegistryCredentialPtrOutputWithContext(ctx context.Context) ProjectEnvironmentRegistryCredentialPtrOutput

type ProjectEnvironmentRegistryCredentialInput 

type ProjectEnvironmentRegistryCredentialInput interface {
	pulumi.Input

	ToProjectEnvironmentRegistryCredentialOutput() ProjectEnvironmentRegistryCredentialOutput
	ToProjectEnvironmentRegistryCredentialOutputWithContext(context.Context) ProjectEnvironmentRegistryCredentialOutput
}

ProjectEnvironmentRegistryCredentialInput is an input type that accepts ProjectEnvironmentRegistryCredentialArgs and ProjectEnvironmentRegistryCredentialOutput values. You can construct a concrete instance of `ProjectEnvironmentRegistryCredentialInput` via: 

ProjectEnvironmentRegistryCredentialArgs{...}

type ProjectEnvironmentRegistryCredentialOutput 

type ProjectEnvironmentRegistryCredentialOutput struct{ *pulumi.OutputState }

func (ProjectEnvironmentRegistryCredentialOutput) Credential 

func (o ProjectEnvironmentRegistryCredentialOutput) Credential() pulumi.StringOutput

The Amazon Resource Name (ARN) or name of credentials created using AWS Secrets Manager.

func (ProjectEnvironmentRegistryCredentialOutput) CredentialProvider 

func (o ProjectEnvironmentRegistryCredentialOutput) CredentialProvider() pulumi.StringOutput

The service that created the credentials to access a private Docker registry. The valid value, SECRETS_MANAGER, is for AWS Secrets Manager.

func (ProjectEnvironmentRegistryCredentialOutput) ElementType 

func (ProjectEnvironmentRegistryCredentialOutput) ElementType() reflect.Type

func (ProjectEnvironmentRegistryCredentialOutput) ToProjectEnvironmentRegistryCredentialOutput 

func (o ProjectEnvironmentRegistryCredentialOutput) ToProjectEnvironmentRegistryCredentialOutput() ProjectEnvironmentRegistryCredentialOutput

func (ProjectEnvironmentRegistryCredentialOutput) ToProjectEnvironmentRegistryCredentialOutputWithContext 

func (o ProjectEnvironmentRegistryCredentialOutput) ToProjectEnvironmentRegistryCredentialOutputWithContext(ctx context.Context) ProjectEnvironmentRegistryCredentialOutput

func (ProjectEnvironmentRegistryCredentialOutput) ToProjectEnvironmentRegistryCredentialPtrOutput 

func (o ProjectEnvironmentRegistryCredentialOutput) ToProjectEnvironmentRegistryCredentialPtrOutput() ProjectEnvironmentRegistryCredentialPtrOutput

func (ProjectEnvironmentRegistryCredentialOutput) ToProjectEnvironmentRegistryCredentialPtrOutputWithContext 

func (o ProjectEnvironmentRegistryCredentialOutput) ToProjectEnvironmentRegistryCredentialPtrOutputWithContext(ctx context.Context) ProjectEnvironmentRegistryCredentialPtrOutput

type ProjectEnvironmentRegistryCredentialPtrInput 

type ProjectEnvironmentRegistryCredentialPtrInput interface {
	pulumi.Input

	ToProjectEnvironmentRegistryCredentialPtrOutput() ProjectEnvironmentRegistryCredentialPtrOutput
	ToProjectEnvironmentRegistryCredentialPtrOutputWithContext(context.Context) ProjectEnvironmentRegistryCredentialPtrOutput
}

ProjectEnvironmentRegistryCredentialPtrInput is an input type that accepts ProjectEnvironmentRegistryCredentialArgs, ProjectEnvironmentRegistryCredentialPtr and ProjectEnvironmentRegistryCredentialPtrOutput values. You can construct a concrete instance of `ProjectEnvironmentRegistryCredentialPtrInput` via: 

        ProjectEnvironmentRegistryCredentialArgs{...}

or:

        nil

func ProjectEnvironmentRegistryCredentialPtr 

func ProjectEnvironmentRegistryCredentialPtr(v *ProjectEnvironmentRegistryCredentialArgs) ProjectEnvironmentRegistryCredentialPtrInput

type ProjectEnvironmentRegistryCredentialPtrOutput 

type ProjectEnvironmentRegistryCredentialPtrOutput struct{ *pulumi.OutputState }

func (ProjectEnvironmentRegistryCredentialPtrOutput) Credential 

func (o ProjectEnvironmentRegistryCredentialPtrOutput) Credential() pulumi.StringPtrOutput

The Amazon Resource Name (ARN) or name of credentials created using AWS Secrets Manager.

func (ProjectEnvironmentRegistryCredentialPtrOutput) CredentialProvider 

func (o ProjectEnvironmentRegistryCredentialPtrOutput) CredentialProvider() pulumi.StringPtrOutput

The service that created the credentials to access a private Docker registry. The valid value, SECRETS_MANAGER, is for AWS Secrets Manager.

func (ProjectEnvironmentRegistryCredentialPtrOutput) Elem 

func (o ProjectEnvironmentRegistryCredentialPtrOutput) Elem() ProjectEnvironmentRegistryCredentialOutput

func (ProjectEnvironmentRegistryCredentialPtrOutput) ElementType 

func (ProjectEnvironmentRegistryCredentialPtrOutput) ElementType() reflect.Type

func (ProjectEnvironmentRegistryCredentialPtrOutput) ToProjectEnvironmentRegistryCredentialPtrOutput 

func (o ProjectEnvironmentRegistryCredentialPtrOutput) ToProjectEnvironmentRegistryCredentialPtrOutput() ProjectEnvironmentRegistryCredentialPtrOutput

func (ProjectEnvironmentRegistryCredentialPtrOutput) ToProjectEnvironmentRegistryCredentialPtrOutputWithContext 

func (o ProjectEnvironmentRegistryCredentialPtrOutput) ToProjectEnvironmentRegistryCredentialPtrOutputWithContext(ctx context.Context) ProjectEnvironmentRegistryCredentialPtrOutput

type ProjectLogsConfig 

type ProjectLogsConfig struct {
	// Configuration for the builds to store logs to CloudWatch
	CloudwatchLogs *ProjectLogsConfigCloudwatchLogs `pulumi:"cloudwatchLogs"`
	// Configuration for the builds to store logs to S3.
	S3Logs *ProjectLogsConfigS3Logs `pulumi:"s3Logs"`
}

type ProjectLogsConfigArgs 

type ProjectLogsConfigArgs struct {
	// Configuration for the builds to store logs to CloudWatch
	CloudwatchLogs ProjectLogsConfigCloudwatchLogsPtrInput `pulumi:"cloudwatchLogs"`
	// Configuration for the builds to store logs to S3.
	S3Logs ProjectLogsConfigS3LogsPtrInput `pulumi:"s3Logs"`
}

func (ProjectLogsConfigArgs) ElementType 

func (ProjectLogsConfigArgs) ElementType() reflect.Type

func (ProjectLogsConfigArgs) ToProjectLogsConfigOutput 

func (i ProjectLogsConfigArgs) ToProjectLogsConfigOutput() ProjectLogsConfigOutput

func (ProjectLogsConfigArgs) ToProjectLogsConfigOutputWithContext 

func (i ProjectLogsConfigArgs) ToProjectLogsConfigOutputWithContext(ctx context.Context) ProjectLogsConfigOutput

func (ProjectLogsConfigArgs) ToProjectLogsConfigPtrOutput 

func (i ProjectLogsConfigArgs) ToProjectLogsConfigPtrOutput() ProjectLogsConfigPtrOutput

func (ProjectLogsConfigArgs) ToProjectLogsConfigPtrOutputWithContext 

func (i ProjectLogsConfigArgs) ToProjectLogsConfigPtrOutputWithContext(ctx context.Context) ProjectLogsConfigPtrOutput

type ProjectLogsConfigCloudwatchLogs 

type ProjectLogsConfigCloudwatchLogs struct {
	// The group name of the logs in CloudWatch Logs.
	GroupName *string `pulumi:"groupName"`
	// Current status of logs in S3 for a build project. Valid values: `ENABLED`, `DISABLED`. Defaults to `DISABLED`.
	Status *string `pulumi:"status"`
	// The stream name of the logs in CloudWatch Logs.
	StreamName *string `pulumi:"streamName"`
}

type ProjectLogsConfigCloudwatchLogsArgs 

type ProjectLogsConfigCloudwatchLogsArgs struct {
	// The group name of the logs in CloudWatch Logs.
	GroupName pulumi.StringPtrInput `pulumi:"groupName"`
	// Current status of logs in S3 for a build project. Valid values: `ENABLED`, `DISABLED`. Defaults to `DISABLED`.
	Status pulumi.StringPtrInput `pulumi:"status"`
	// The stream name of the logs in CloudWatch Logs.
	StreamName pulumi.StringPtrInput `pulumi:"streamName"`
}

func (ProjectLogsConfigCloudwatchLogsArgs) ElementType 

func (ProjectLogsConfigCloudwatchLogsArgs) ElementType() reflect.Type

func (ProjectLogsConfigCloudwatchLogsArgs) ToProjectLogsConfigCloudwatchLogsOutput 

func (i ProjectLogsConfigCloudwatchLogsArgs) ToProjectLogsConfigCloudwatchLogsOutput() ProjectLogsConfigCloudwatchLogsOutput

func (ProjectLogsConfigCloudwatchLogsArgs) ToProjectLogsConfigCloudwatchLogsOutputWithContext 

func (i ProjectLogsConfigCloudwatchLogsArgs) ToProjectLogsConfigCloudwatchLogsOutputWithContext(ctx context.Context) ProjectLogsConfigCloudwatchLogsOutput

func (ProjectLogsConfigCloudwatchLogsArgs) ToProjectLogsConfigCloudwatchLogsPtrOutput 

func (i ProjectLogsConfigCloudwatchLogsArgs) ToProjectLogsConfigCloudwatchLogsPtrOutput() ProjectLogsConfigCloudwatchLogsPtrOutput

func (ProjectLogsConfigCloudwatchLogsArgs) ToProjectLogsConfigCloudwatchLogsPtrOutputWithContext 

func (i ProjectLogsConfigCloudwatchLogsArgs) ToProjectLogsConfigCloudwatchLogsPtrOutputWithContext(ctx context.Context) ProjectLogsConfigCloudwatchLogsPtrOutput

type ProjectLogsConfigCloudwatchLogsInput 

type ProjectLogsConfigCloudwatchLogsInput interface {
	pulumi.Input

	ToProjectLogsConfigCloudwatchLogsOutput() ProjectLogsConfigCloudwatchLogsOutput
	ToProjectLogsConfigCloudwatchLogsOutputWithContext(context.Context) ProjectLogsConfigCloudwatchLogsOutput
}

ProjectLogsConfigCloudwatchLogsInput is an input type that accepts ProjectLogsConfigCloudwatchLogsArgs and ProjectLogsConfigCloudwatchLogsOutput values. You can construct a concrete instance of `ProjectLogsConfigCloudwatchLogsInput` via: 

ProjectLogsConfigCloudwatchLogsArgs{...}

type ProjectLogsConfigCloudwatchLogsOutput 

type ProjectLogsConfigCloudwatchLogsOutput struct{ *pulumi.OutputState }

func (ProjectLogsConfigCloudwatchLogsOutput) ElementType 

func (ProjectLogsConfigCloudwatchLogsOutput) ElementType() reflect.Type

func (ProjectLogsConfigCloudwatchLogsOutput) GroupName 

func (o ProjectLogsConfigCloudwatchLogsOutput) GroupName() pulumi.StringPtrOutput

The group name of the logs in CloudWatch Logs.

func (ProjectLogsConfigCloudwatchLogsOutput) Status 

func (o ProjectLogsConfigCloudwatchLogsOutput) Status() pulumi.StringPtrOutput

Current status of logs in S3 for a build project. Valid values: `ENABLED`, `DISABLED`. Defaults to `DISABLED`.

func (ProjectLogsConfigCloudwatchLogsOutput) StreamName 

func (o ProjectLogsConfigCloudwatchLogsOutput) StreamName() pulumi.StringPtrOutput

The stream name of the logs in CloudWatch Logs.

func (ProjectLogsConfigCloudwatchLogsOutput) ToProjectLogsConfigCloudwatchLogsOutput 

func (o ProjectLogsConfigCloudwatchLogsOutput) ToProjectLogsConfigCloudwatchLogsOutput() ProjectLogsConfigCloudwatchLogsOutput

func (ProjectLogsConfigCloudwatchLogsOutput) ToProjectLogsConfigCloudwatchLogsOutputWithContext 

func (o ProjectLogsConfigCloudwatchLogsOutput) ToProjectLogsConfigCloudwatchLogsOutputWithContext(ctx context.Context) ProjectLogsConfigCloudwatchLogsOutput

func (ProjectLogsConfigCloudwatchLogsOutput) ToProjectLogsConfigCloudwatchLogsPtrOutput 

func (o ProjectLogsConfigCloudwatchLogsOutput) ToProjectLogsConfigCloudwatchLogsPtrOutput() ProjectLogsConfigCloudwatchLogsPtrOutput

func (ProjectLogsConfigCloudwatchLogsOutput) ToProjectLogsConfigCloudwatchLogsPtrOutputWithContext 

func (o ProjectLogsConfigCloudwatchLogsOutput) ToProjectLogsConfigCloudwatchLogsPtrOutputWithContext(ctx context.Context) ProjectLogsConfigCloudwatchLogsPtrOutput

type ProjectLogsConfigCloudwatchLogsPtrInput 

type ProjectLogsConfigCloudwatchLogsPtrInput interface {
	pulumi.Input

	ToProjectLogsConfigCloudwatchLogsPtrOutput() ProjectLogsConfigCloudwatchLogsPtrOutput
	ToProjectLogsConfigCloudwatchLogsPtrOutputWithContext(context.Context) ProjectLogsConfigCloudwatchLogsPtrOutput
}

ProjectLogsConfigCloudwatchLogsPtrInput is an input type that accepts ProjectLogsConfigCloudwatchLogsArgs, ProjectLogsConfigCloudwatchLogsPtr and ProjectLogsConfigCloudwatchLogsPtrOutput values. You can construct a concrete instance of `ProjectLogsConfigCloudwatchLogsPtrInput` via: 

        ProjectLogsConfigCloudwatchLogsArgs{...}

or:

        nil

func ProjectLogsConfigCloudwatchLogsPtr 

func ProjectLogsConfigCloudwatchLogsPtr(v *ProjectLogsConfigCloudwatchLogsArgs) ProjectLogsConfigCloudwatchLogsPtrInput

type ProjectLogsConfigCloudwatchLogsPtrOutput 

type ProjectLogsConfigCloudwatchLogsPtrOutput struct{ *pulumi.OutputState }

func (ProjectLogsConfigCloudwatchLogsPtrOutput) Elem 

func (o ProjectLogsConfigCloudwatchLogsPtrOutput) Elem() ProjectLogsConfigCloudwatchLogsOutput

func (ProjectLogsConfigCloudwatchLogsPtrOutput) ElementType 

func (ProjectLogsConfigCloudwatchLogsPtrOutput) ElementType() reflect.Type

func (ProjectLogsConfigCloudwatchLogsPtrOutput) GroupName 

func (o ProjectLogsConfigCloudwatchLogsPtrOutput) GroupName() pulumi.StringPtrOutput

The group name of the logs in CloudWatch Logs.

func (ProjectLogsConfigCloudwatchLogsPtrOutput) Status 

func (o ProjectLogsConfigCloudwatchLogsPtrOutput) Status() pulumi.StringPtrOutput

Current status of logs in S3 for a build project. Valid values: `ENABLED`, `DISABLED`. Defaults to `DISABLED`.

func (ProjectLogsConfigCloudwatchLogsPtrOutput) StreamName 

func (o ProjectLogsConfigCloudwatchLogsPtrOutput) StreamName() pulumi.StringPtrOutput

The stream name of the logs in CloudWatch Logs.

func (ProjectLogsConfigCloudwatchLogsPtrOutput) ToProjectLogsConfigCloudwatchLogsPtrOutput 

func (o ProjectLogsConfigCloudwatchLogsPtrOutput) ToProjectLogsConfigCloudwatchLogsPtrOutput() ProjectLogsConfigCloudwatchLogsPtrOutput

func (ProjectLogsConfigCloudwatchLogsPtrOutput) ToProjectLogsConfigCloudwatchLogsPtrOutputWithContext 

func (o ProjectLogsConfigCloudwatchLogsPtrOutput) ToProjectLogsConfigCloudwatchLogsPtrOutputWithContext(ctx context.Context) ProjectLogsConfigCloudwatchLogsPtrOutput

type ProjectLogsConfigInput 

type ProjectLogsConfigInput interface {
	pulumi.Input

	ToProjectLogsConfigOutput() ProjectLogsConfigOutput
	ToProjectLogsConfigOutputWithContext(context.Context) ProjectLogsConfigOutput
}

ProjectLogsConfigInput is an input type that accepts ProjectLogsConfigArgs and ProjectLogsConfigOutput values. You can construct a concrete instance of `ProjectLogsConfigInput` via: 

ProjectLogsConfigArgs{...}

type ProjectLogsConfigOutput 

type ProjectLogsConfigOutput struct{ *pulumi.OutputState }

func (ProjectLogsConfigOutput) CloudwatchLogs 

func (o ProjectLogsConfigOutput) CloudwatchLogs() ProjectLogsConfigCloudwatchLogsPtrOutput

Configuration for the builds to store logs to CloudWatch

func (ProjectLogsConfigOutput) ElementType 

func (ProjectLogsConfigOutput) ElementType() reflect.Type

func (ProjectLogsConfigOutput) S3Logs 

func (o ProjectLogsConfigOutput) S3Logs() ProjectLogsConfigS3LogsPtrOutput

Configuration for the builds to store logs to S3.

func (ProjectLogsConfigOutput) ToProjectLogsConfigOutput 

func (o ProjectLogsConfigOutput) ToProjectLogsConfigOutput() ProjectLogsConfigOutput

func (ProjectLogsConfigOutput) ToProjectLogsConfigOutputWithContext 

func (o ProjectLogsConfigOutput) ToProjectLogsConfigOutputWithContext(ctx context.Context) ProjectLogsConfigOutput

func (ProjectLogsConfigOutput) ToProjectLogsConfigPtrOutput 

func (o ProjectLogsConfigOutput) ToProjectLogsConfigPtrOutput() ProjectLogsConfigPtrOutput

func (ProjectLogsConfigOutput) ToProjectLogsConfigPtrOutputWithContext 

func (o ProjectLogsConfigOutput) ToProjectLogsConfigPtrOutputWithContext(ctx context.Context) ProjectLogsConfigPtrOutput

type ProjectLogsConfigPtrInput 

type ProjectLogsConfigPtrInput interface {
	pulumi.Input

	ToProjectLogsConfigPtrOutput() ProjectLogsConfigPtrOutput
	ToProjectLogsConfigPtrOutputWithContext(context.Context) ProjectLogsConfigPtrOutput
}

ProjectLogsConfigPtrInput is an input type that accepts ProjectLogsConfigArgs, ProjectLogsConfigPtr and ProjectLogsConfigPtrOutput values. You can construct a concrete instance of `ProjectLogsConfigPtrInput` via: 

        ProjectLogsConfigArgs{...}

or:

        nil

func ProjectLogsConfigPtr 

func ProjectLogsConfigPtr(v *ProjectLogsConfigArgs) ProjectLogsConfigPtrInput

type ProjectLogsConfigPtrOutput 

type ProjectLogsConfigPtrOutput struct{ *pulumi.OutputState }

func (ProjectLogsConfigPtrOutput) CloudwatchLogs 

func (o ProjectLogsConfigPtrOutput) CloudwatchLogs() ProjectLogsConfigCloudwatchLogsPtrOutput

Configuration for the builds to store logs to CloudWatch

func (ProjectLogsConfigPtrOutput) Elem 

func (o ProjectLogsConfigPtrOutput) Elem() ProjectLogsConfigOutput

func (ProjectLogsConfigPtrOutput) ElementType 

func (ProjectLogsConfigPtrOutput) ElementType() reflect.Type

func (ProjectLogsConfigPtrOutput) S3Logs 

func (o ProjectLogsConfigPtrOutput) S3Logs() ProjectLogsConfigS3LogsPtrOutput

Configuration for the builds to store logs to S3.

func (ProjectLogsConfigPtrOutput) ToProjectLogsConfigPtrOutput 

func (o ProjectLogsConfigPtrOutput) ToProjectLogsConfigPtrOutput() ProjectLogsConfigPtrOutput

func (ProjectLogsConfigPtrOutput) ToProjectLogsConfigPtrOutputWithContext 

func (o ProjectLogsConfigPtrOutput) ToProjectLogsConfigPtrOutputWithContext(ctx context.Context) ProjectLogsConfigPtrOutput

type ProjectLogsConfigS3Logs 

type ProjectLogsConfigS3Logs struct {
	// If set to true, output artifacts will not be encrypted. If `type` is set to `NO_ARTIFACTS` then this value will be ignored. Defaults to `false`.
	EncryptionDisabled *bool `pulumi:"encryptionDisabled"`
	// Information about the build output artifact location. If `type` is set to `CODEPIPELINE` or `NO_ARTIFACTS` then this value will be ignored. If `type` is set to `S3`, this is the name of the output bucket.
	Location *string `pulumi:"location"`
	// Current status of logs in CloudWatch Logs for a build project. Valid values: `ENABLED`, `DISABLED`. Defaults to `ENABLED`.
	Status *string `pulumi:"status"`
}

type ProjectLogsConfigS3LogsArgs 

type ProjectLogsConfigS3LogsArgs struct {
	// If set to true, output artifacts will not be encrypted. If `type` is set to `NO_ARTIFACTS` then this value will be ignored. Defaults to `false`.
	EncryptionDisabled pulumi.BoolPtrInput `pulumi:"encryptionDisabled"`
	// Information about the build output artifact location. If `type` is set to `CODEPIPELINE` or `NO_ARTIFACTS` then this value will be ignored. If `type` is set to `S3`, this is the name of the output bucket.
	Location pulumi.StringPtrInput `pulumi:"location"`
	// Current status of logs in CloudWatch Logs for a build project. Valid values: `ENABLED`, `DISABLED`. Defaults to `ENABLED`.
	Status pulumi.StringPtrInput `pulumi:"status"`
}

func (ProjectLogsConfigS3LogsArgs) ElementType 

func (ProjectLogsConfigS3LogsArgs) ElementType() reflect.Type

func (ProjectLogsConfigS3LogsArgs) ToProjectLogsConfigS3LogsOutput 

func (i ProjectLogsConfigS3LogsArgs) ToProjectLogsConfigS3LogsOutput() ProjectLogsConfigS3LogsOutput

func (ProjectLogsConfigS3LogsArgs) ToProjectLogsConfigS3LogsOutputWithContext 

func (i ProjectLogsConfigS3LogsArgs) ToProjectLogsConfigS3LogsOutputWithContext(ctx context.Context) ProjectLogsConfigS3LogsOutput

func (ProjectLogsConfigS3LogsArgs) ToProjectLogsConfigS3LogsPtrOutput 

func (i ProjectLogsConfigS3LogsArgs) ToProjectLogsConfigS3LogsPtrOutput() ProjectLogsConfigS3LogsPtrOutput

func (ProjectLogsConfigS3LogsArgs) ToProjectLogsConfigS3LogsPtrOutputWithContext 

func (i ProjectLogsConfigS3LogsArgs) ToProjectLogsConfigS3LogsPtrOutputWithContext(ctx context.Context) ProjectLogsConfigS3LogsPtrOutput

type ProjectLogsConfigS3LogsInput 

type ProjectLogsConfigS3LogsInput interface {
	pulumi.Input

	ToProjectLogsConfigS3LogsOutput() ProjectLogsConfigS3LogsOutput
	ToProjectLogsConfigS3LogsOutputWithContext(context.Context) ProjectLogsConfigS3LogsOutput
}

ProjectLogsConfigS3LogsInput is an input type that accepts ProjectLogsConfigS3LogsArgs and ProjectLogsConfigS3LogsOutput values. You can construct a concrete instance of `ProjectLogsConfigS3LogsInput` via: 

ProjectLogsConfigS3LogsArgs{...}

type ProjectLogsConfigS3LogsOutput 

type ProjectLogsConfigS3LogsOutput struct{ *pulumi.OutputState }

func (ProjectLogsConfigS3LogsOutput) ElementType 

func (ProjectLogsConfigS3LogsOutput) ElementType() reflect.Type

func (ProjectLogsConfigS3LogsOutput) EncryptionDisabled 

func (o ProjectLogsConfigS3LogsOutput) EncryptionDisabled() pulumi.BoolPtrOutput

If set to true, output artifacts will not be encrypted. If `type` is set to `NO_ARTIFACTS` then this value will be ignored. Defaults to `false`.

func (ProjectLogsConfigS3LogsOutput) Location 

func (o ProjectLogsConfigS3LogsOutput) Location() pulumi.StringPtrOutput

Information about the build output artifact location. If `type` is set to `CODEPIPELINE` or `NO_ARTIFACTS` then this value will be ignored. If `type` is set to `S3`, this is the name of the output bucket.

func (ProjectLogsConfigS3LogsOutput) Status 

func (o ProjectLogsConfigS3LogsOutput) Status() pulumi.StringPtrOutput

Current status of logs in CloudWatch Logs for a build project. Valid values: `ENABLED`, `DISABLED`. Defaults to `ENABLED`.

func (ProjectLogsConfigS3LogsOutput) ToProjectLogsConfigS3LogsOutput 

func (o ProjectLogsConfigS3LogsOutput) ToProjectLogsConfigS3LogsOutput() ProjectLogsConfigS3LogsOutput

func (ProjectLogsConfigS3LogsOutput) ToProjectLogsConfigS3LogsOutputWithContext 

func (o ProjectLogsConfigS3LogsOutput) ToProjectLogsConfigS3LogsOutputWithContext(ctx context.Context) ProjectLogsConfigS3LogsOutput

func (ProjectLogsConfigS3LogsOutput) ToProjectLogsConfigS3LogsPtrOutput 

func (o ProjectLogsConfigS3LogsOutput) ToProjectLogsConfigS3LogsPtrOutput() ProjectLogsConfigS3LogsPtrOutput

func (ProjectLogsConfigS3LogsOutput) ToProjectLogsConfigS3LogsPtrOutputWithContext 

func (o ProjectLogsConfigS3LogsOutput) ToProjectLogsConfigS3LogsPtrOutputWithContext(ctx context.Context) ProjectLogsConfigS3LogsPtrOutput

type ProjectLogsConfigS3LogsPtrInput 

type ProjectLogsConfigS3LogsPtrInput interface {
	pulumi.Input

	ToProjectLogsConfigS3LogsPtrOutput() ProjectLogsConfigS3LogsPtrOutput
	ToProjectLogsConfigS3LogsPtrOutputWithContext(context.Context) ProjectLogsConfigS3LogsPtrOutput
}

ProjectLogsConfigS3LogsPtrInput is an input type that accepts ProjectLogsConfigS3LogsArgs, ProjectLogsConfigS3LogsPtr and ProjectLogsConfigS3LogsPtrOutput values. You can construct a concrete instance of `ProjectLogsConfigS3LogsPtrInput` via: 

        ProjectLogsConfigS3LogsArgs{...}

or:

        nil

func ProjectLogsConfigS3LogsPtr 

func ProjectLogsConfigS3LogsPtr(v *ProjectLogsConfigS3LogsArgs) ProjectLogsConfigS3LogsPtrInput

type ProjectLogsConfigS3LogsPtrOutput 

type ProjectLogsConfigS3LogsPtrOutput struct{ *pulumi.OutputState }

func (ProjectLogsConfigS3LogsPtrOutput) Elem 

func (o ProjectLogsConfigS3LogsPtrOutput) Elem() ProjectLogsConfigS3LogsOutput

func (ProjectLogsConfigS3LogsPtrOutput) ElementType 

func (ProjectLogsConfigS3LogsPtrOutput) ElementType() reflect.Type

func (ProjectLogsConfigS3LogsPtrOutput) EncryptionDisabled 

func (o ProjectLogsConfigS3LogsPtrOutput) EncryptionDisabled() pulumi.BoolPtrOutput

If set to true, output artifacts will not be encrypted. If `type` is set to `NO_ARTIFACTS` then this value will be ignored. Defaults to `false`.

func (ProjectLogsConfigS3LogsPtrOutput) Location 

func (o ProjectLogsConfigS3LogsPtrOutput) Location() pulumi.StringPtrOutput

Information about the build output artifact location. If `type` is set to `CODEPIPELINE` or `NO_ARTIFACTS` then this value will be ignored. If `type` is set to `S3`, this is the name of the output bucket.

func (ProjectLogsConfigS3LogsPtrOutput) Status 

func (o ProjectLogsConfigS3LogsPtrOutput) Status() pulumi.StringPtrOutput

Current status of logs in CloudWatch Logs for a build project. Valid values: `ENABLED`, `DISABLED`. Defaults to `ENABLED`.

func (ProjectLogsConfigS3LogsPtrOutput) ToProjectLogsConfigS3LogsPtrOutput 

func (o ProjectLogsConfigS3LogsPtrOutput) ToProjectLogsConfigS3LogsPtrOutput() ProjectLogsConfigS3LogsPtrOutput

func (ProjectLogsConfigS3LogsPtrOutput) ToProjectLogsConfigS3LogsPtrOutputWithContext 

func (o ProjectLogsConfigS3LogsPtrOutput) ToProjectLogsConfigS3LogsPtrOutputWithContext(ctx context.Context) ProjectLogsConfigS3LogsPtrOutput

type ProjectSecondaryArtifact 

type ProjectSecondaryArtifact struct {
	// The artifact identifier. Must be the same specified inside AWS CodeBuild buildspec.
	ArtifactIdentifier string `pulumi:"artifactIdentifier"`
	// If set to true, output artifacts will not be encrypted. If `type` is set to `NO_ARTIFACTS` then this value will be ignored. Defaults to `false`.
	EncryptionDisabled *bool `pulumi:"encryptionDisabled"`
	// Information about the build output artifact location. If `type` is set to `CODEPIPELINE` or `NO_ARTIFACTS` then this value will be ignored. If `type` is set to `S3`, this is the name of the output bucket. If `path` is not also specified, then `location` can also specify the path of the output artifact in the output bucket.
	Location *string `pulumi:"location"`
	// The name of the project. If `type` is set to `S3`, this is the name of the output artifact object
	Name *string `pulumi:"name"`
	// The namespace to use in storing build artifacts. If `type` is set to `S3`, then valid values for this parameter are: `BUILD_ID` or `NONE`.
	NamespaceType *string `pulumi:"namespaceType"`
	// If set to true, a name specified in the build spec file overrides the artifact name.
	OverrideArtifactName *bool `pulumi:"overrideArtifactName"`
	// The type of build output artifact to create. If `type` is set to `S3`, valid values for this parameter are: `NONE` or `ZIP`
	Packaging *string `pulumi:"packaging"`
	// If `type` is set to `S3`, this is the path to the output artifact
	Path *string `pulumi:"path"`
	// The build output artifact's type. Valid values for this parameter are: `CODEPIPELINE`, `NO_ARTIFACTS` or `S3`.
	Type string `pulumi:"type"`
}

type ProjectSecondaryArtifactArgs 

type ProjectSecondaryArtifactArgs struct {
	// The artifact identifier. Must be the same specified inside AWS CodeBuild buildspec.
	ArtifactIdentifier pulumi.StringInput `pulumi:"artifactIdentifier"`
	// If set to true, output artifacts will not be encrypted. If `type` is set to `NO_ARTIFACTS` then this value will be ignored. Defaults to `false`.
	EncryptionDisabled pulumi.BoolPtrInput `pulumi:"encryptionDisabled"`
	// Information about the build output artifact location. If `type` is set to `CODEPIPELINE` or `NO_ARTIFACTS` then this value will be ignored. If `type` is set to `S3`, this is the name of the output bucket. If `path` is not also specified, then `location` can also specify the path of the output artifact in the output bucket.
	Location pulumi.StringPtrInput `pulumi:"location"`
	// The name of the project. If `type` is set to `S3`, this is the name of the output artifact object
	Name pulumi.StringPtrInput `pulumi:"name"`
	// The namespace to use in storing build artifacts. If `type` is set to `S3`, then valid values for this parameter are: `BUILD_ID` or `NONE`.
	NamespaceType pulumi.StringPtrInput `pulumi:"namespaceType"`
	// If set to true, a name specified in the build spec file overrides the artifact name.
	OverrideArtifactName pulumi.BoolPtrInput `pulumi:"overrideArtifactName"`
	// The type of build output artifact to create. If `type` is set to `S3`, valid values for this parameter are: `NONE` or `ZIP`
	Packaging pulumi.StringPtrInput `pulumi:"packaging"`
	// If `type` is set to `S3`, this is the path to the output artifact
	Path pulumi.StringPtrInput `pulumi:"path"`
	// The build output artifact's type. Valid values for this parameter are: `CODEPIPELINE`, `NO_ARTIFACTS` or `S3`.
	Type pulumi.StringInput `pulumi:"type"`
}

func (ProjectSecondaryArtifactArgs) ElementType 

func (ProjectSecondaryArtifactArgs) ElementType() reflect.Type

func (ProjectSecondaryArtifactArgs) ToProjectSecondaryArtifactOutput 

func (i ProjectSecondaryArtifactArgs) ToProjectSecondaryArtifactOutput() ProjectSecondaryArtifactOutput

func (ProjectSecondaryArtifactArgs) ToProjectSecondaryArtifactOutputWithContext 

func (i ProjectSecondaryArtifactArgs) ToProjectSecondaryArtifactOutputWithContext(ctx context.Context) ProjectSecondaryArtifactOutput

type ProjectSecondaryArtifactArray 

type ProjectSecondaryArtifactArray []ProjectSecondaryArtifactInput

func (ProjectSecondaryArtifactArray) ElementType 

func (ProjectSecondaryArtifactArray) ElementType() reflect.Type

func (ProjectSecondaryArtifactArray) ToProjectSecondaryArtifactArrayOutput 

func (i ProjectSecondaryArtifactArray) ToProjectSecondaryArtifactArrayOutput() ProjectSecondaryArtifactArrayOutput

func (ProjectSecondaryArtifactArray) ToProjectSecondaryArtifactArrayOutputWithContext 

func (i ProjectSecondaryArtifactArray) ToProjectSecondaryArtifactArrayOutputWithContext(ctx context.Context) ProjectSecondaryArtifactArrayOutput

type ProjectSecondaryArtifactArrayInput 

type ProjectSecondaryArtifactArrayInput interface {
	pulumi.Input

	ToProjectSecondaryArtifactArrayOutput() ProjectSecondaryArtifactArrayOutput
	ToProjectSecondaryArtifactArrayOutputWithContext(context.Context) ProjectSecondaryArtifactArrayOutput
}

ProjectSecondaryArtifactArrayInput is an input type that accepts ProjectSecondaryArtifactArray and ProjectSecondaryArtifactArrayOutput values. You can construct a concrete instance of `ProjectSecondaryArtifactArrayInput` via: 

ProjectSecondaryArtifactArray{ ProjectSecondaryArtifactArgs{...} }

type ProjectSecondaryArtifactArrayOutput 

type ProjectSecondaryArtifactArrayOutput struct{ *pulumi.OutputState }

func (ProjectSecondaryArtifactArrayOutput) ElementType 

func (ProjectSecondaryArtifactArrayOutput) ElementType() reflect.Type

func (ProjectSecondaryArtifactArrayOutput) Index 

func (o ProjectSecondaryArtifactArrayOutput) Index(i pulumi.IntInput) ProjectSecondaryArtifactOutput

func (ProjectSecondaryArtifactArrayOutput) ToProjectSecondaryArtifactArrayOutput 

func (o ProjectSecondaryArtifactArrayOutput) ToProjectSecondaryArtifactArrayOutput() ProjectSecondaryArtifactArrayOutput

func (ProjectSecondaryArtifactArrayOutput) ToProjectSecondaryArtifactArrayOutputWithContext 

func (o ProjectSecondaryArtifactArrayOutput) ToProjectSecondaryArtifactArrayOutputWithContext(ctx context.Context) ProjectSecondaryArtifactArrayOutput

type ProjectSecondaryArtifactInput 

type ProjectSecondaryArtifactInput interface {
	pulumi.Input

	ToProjectSecondaryArtifactOutput() ProjectSecondaryArtifactOutput
	ToProjectSecondaryArtifactOutputWithContext(context.Context) ProjectSecondaryArtifactOutput
}

ProjectSecondaryArtifactInput is an input type that accepts ProjectSecondaryArtifactArgs and ProjectSecondaryArtifactOutput values. You can construct a concrete instance of `ProjectSecondaryArtifactInput` via: 

ProjectSecondaryArtifactArgs{...}

type ProjectSecondaryArtifactOutput 

type ProjectSecondaryArtifactOutput struct{ *pulumi.OutputState }

func (ProjectSecondaryArtifactOutput) ArtifactIdentifier 

func (o ProjectSecondaryArtifactOutput) ArtifactIdentifier() pulumi.StringOutput

The artifact identifier. Must be the same specified inside AWS CodeBuild buildspec.

func (ProjectSecondaryArtifactOutput) ElementType 

func (ProjectSecondaryArtifactOutput) ElementType() reflect.Type

func (ProjectSecondaryArtifactOutput) EncryptionDisabled 

func (o ProjectSecondaryArtifactOutput) EncryptionDisabled() pulumi.BoolPtrOutput

If set to true, output artifacts will not be encrypted. If `type` is set to `NO_ARTIFACTS` then this value will be ignored. Defaults to `false`.

func (ProjectSecondaryArtifactOutput) Location 

func (o ProjectSecondaryArtifactOutput) Location() pulumi.StringPtrOutput

Information about the build output artifact location. If `type` is set to `CODEPIPELINE` or `NO_ARTIFACTS` then this value will be ignored. If `type` is set to `S3`, this is the name of the output bucket. If `path` is not also specified, then `location` can also specify the path of the output artifact in the output bucket.

func (ProjectSecondaryArtifactOutput) Name 

func (o ProjectSecondaryArtifactOutput) Name() pulumi.StringPtrOutput

The name of the project. If `type` is set to `S3`, this is the name of the output artifact object

func (ProjectSecondaryArtifactOutput) NamespaceType 

func (o ProjectSecondaryArtifactOutput) NamespaceType() pulumi.StringPtrOutput

The namespace to use in storing build artifacts. If `type` is set to `S3`, then valid values for this parameter are: `BUILD_ID` or `NONE`.

func (ProjectSecondaryArtifactOutput) OverrideArtifactName 

func (o ProjectSecondaryArtifactOutput) OverrideArtifactName() pulumi.BoolPtrOutput

If set to true, a name specified in the build spec file overrides the artifact name.

func (ProjectSecondaryArtifactOutput) Packaging 

func (o ProjectSecondaryArtifactOutput) Packaging() pulumi.StringPtrOutput

The type of build output artifact to create. If `type` is set to `S3`, valid values for this parameter are: `NONE` or `ZIP`

func (ProjectSecondaryArtifactOutput) Path 

func (o ProjectSecondaryArtifactOutput) Path() pulumi.StringPtrOutput

If `type` is set to `S3`, this is the path to the output artifact

func (ProjectSecondaryArtifactOutput) ToProjectSecondaryArtifactOutput 

func (o ProjectSecondaryArtifactOutput) ToProjectSecondaryArtifactOutput() ProjectSecondaryArtifactOutput

func (ProjectSecondaryArtifactOutput) ToProjectSecondaryArtifactOutputWithContext 

func (o ProjectSecondaryArtifactOutput) ToProjectSecondaryArtifactOutputWithContext(ctx context.Context) ProjectSecondaryArtifactOutput

func (ProjectSecondaryArtifactOutput) Type 

func (o ProjectSecondaryArtifactOutput) Type() pulumi.StringOutput

The build output artifact's type. Valid values for this parameter are: `CODEPIPELINE`, `NO_ARTIFACTS` or `S3`.

type ProjectSecondarySource 

type ProjectSecondarySource struct {
	// Information about the authorization settings for AWS CodeBuild to access the source code to be built. Auth blocks are documented below.
	Auths []ProjectSecondarySourceAuth `pulumi:"auths"`
	// The build spec declaration to use for this build project's related builds.
	Buildspec *string `pulumi:"buildspec"`
	// Truncate git history to this many commits.
	GitCloneDepth *int `pulumi:"gitCloneDepth"`
	// Information about the Git submodules configuration for an AWS CodeBuild build project. Git submodules config blocks are documented below. This option is only valid when the `type` is `CODECOMMIT`, `GITHUB` or `GITHUB_ENTERPRISE`.
	GitSubmodulesConfig *ProjectSecondarySourceGitSubmodulesConfig `pulumi:"gitSubmodulesConfig"`
	// Ignore SSL warnings when connecting to source control.
	InsecureSsl *bool `pulumi:"insecureSsl"`
	// The location of the source code from git or s3.
	Location *string `pulumi:"location"`
	// Set to `true` to report the status of a build's start and finish to your source provider. This option is only valid when your source provider is `GITHUB`, `BITBUCKET`, or `GITHUB_ENTERPRISE`.
	ReportBuildStatus *bool `pulumi:"reportBuildStatus"`
	// The source identifier. Source data will be put inside a folder named as this parameter inside AWS CodeBuild source directory
	SourceIdentifier string `pulumi:"sourceIdentifier"`
	// The type of repository that contains the source code to be built. Valid values for this parameter are: `CODECOMMIT`, `CODEPIPELINE`, `GITHUB`, `GITHUB_ENTERPRISE`, `BITBUCKET` or `S3`.
	Type string `pulumi:"type"`
}

type ProjectSecondarySourceArgs 

type ProjectSecondarySourceArgs struct {
	// Information about the authorization settings for AWS CodeBuild to access the source code to be built. Auth blocks are documented below.
	Auths ProjectSecondarySourceAuthArrayInput `pulumi:"auths"`
	// The build spec declaration to use for this build project's related builds.
	Buildspec pulumi.StringPtrInput `pulumi:"buildspec"`
	// Truncate git history to this many commits.
	GitCloneDepth pulumi.IntPtrInput `pulumi:"gitCloneDepth"`
	// Information about the Git submodules configuration for an AWS CodeBuild build project. Git submodules config blocks are documented below. This option is only valid when the `type` is `CODECOMMIT`, `GITHUB` or `GITHUB_ENTERPRISE`.
	GitSubmodulesConfig ProjectSecondarySourceGitSubmodulesConfigPtrInput `pulumi:"gitSubmodulesConfig"`
	// Ignore SSL warnings when connecting to source control.
	InsecureSsl pulumi.BoolPtrInput `pulumi:"insecureSsl"`
	// The location of the source code from git or s3.
	Location pulumi.StringPtrInput `pulumi:"location"`
	// Set to `true` to report the status of a build's start and finish to your source provider. This option is only valid when your source provider is `GITHUB`, `BITBUCKET`, or `GITHUB_ENTERPRISE`.
	ReportBuildStatus pulumi.BoolPtrInput `pulumi:"reportBuildStatus"`
	// The source identifier. Source data will be put inside a folder named as this parameter inside AWS CodeBuild source directory
	SourceIdentifier pulumi.StringInput `pulumi:"sourceIdentifier"`
	// The type of repository that contains the source code to be built. Valid values for this parameter are: `CODECOMMIT`, `CODEPIPELINE`, `GITHUB`, `GITHUB_ENTERPRISE`, `BITBUCKET` or `S3`.
	Type pulumi.StringInput `pulumi:"type"`
}

func (ProjectSecondarySourceArgs) ElementType 

func (ProjectSecondarySourceArgs) ElementType() reflect.Type

func (ProjectSecondarySourceArgs) ToProjectSecondarySourceOutput 

func (i ProjectSecondarySourceArgs) ToProjectSecondarySourceOutput() ProjectSecondarySourceOutput

func (ProjectSecondarySourceArgs) ToProjectSecondarySourceOutputWithContext 

func (i ProjectSecondarySourceArgs) ToProjectSecondarySourceOutputWithContext(ctx context.Context) ProjectSecondarySourceOutput

type ProjectSecondarySourceArray 

type ProjectSecondarySourceArray []ProjectSecondarySourceInput

func (ProjectSecondarySourceArray) ElementType 

func (ProjectSecondarySourceArray) ElementType() reflect.Type

func (ProjectSecondarySourceArray) ToProjectSecondarySourceArrayOutput 

func (i ProjectSecondarySourceArray) ToProjectSecondarySourceArrayOutput() ProjectSecondarySourceArrayOutput

func (ProjectSecondarySourceArray) ToProjectSecondarySourceArrayOutputWithContext 

func (i ProjectSecondarySourceArray) ToProjectSecondarySourceArrayOutputWithContext(ctx context.Context) ProjectSecondarySourceArrayOutput

type ProjectSecondarySourceArrayInput 

type ProjectSecondarySourceArrayInput interface {
	pulumi.Input

	ToProjectSecondarySourceArrayOutput() ProjectSecondarySourceArrayOutput
	ToProjectSecondarySourceArrayOutputWithContext(context.Context) ProjectSecondarySourceArrayOutput
}

ProjectSecondarySourceArrayInput is an input type that accepts ProjectSecondarySourceArray and ProjectSecondarySourceArrayOutput values. You can construct a concrete instance of `ProjectSecondarySourceArrayInput` via: 

ProjectSecondarySourceArray{ ProjectSecondarySourceArgs{...} }

type ProjectSecondarySourceArrayOutput 

type ProjectSecondarySourceArrayOutput struct{ *pulumi.OutputState }

func (ProjectSecondarySourceArrayOutput) ElementType 

func (ProjectSecondarySourceArrayOutput) ElementType() reflect.Type

func (ProjectSecondarySourceArrayOutput) Index 

func (o ProjectSecondarySourceArrayOutput) Index(i pulumi.IntInput) ProjectSecondarySourceOutput

func (ProjectSecondarySourceArrayOutput) ToProjectSecondarySourceArrayOutput 

func (o ProjectSecondarySourceArrayOutput) ToProjectSecondarySourceArrayOutput() ProjectSecondarySourceArrayOutput

func (ProjectSecondarySourceArrayOutput) ToProjectSecondarySourceArrayOutputWithContext 

func (o ProjectSecondarySourceArrayOutput) ToProjectSecondarySourceArrayOutputWithContext(ctx context.Context) ProjectSecondarySourceArrayOutput

type ProjectSecondarySourceAuth 

type ProjectSecondarySourceAuth struct {
	// The resource value that applies to the specified authorization type.
	Resource *string `pulumi:"resource"`
	// The authorization type to use. The only valid value is `OAUTH`
	Type string `pulumi:"type"`
}

type ProjectSecondarySourceAuthArgs 

type ProjectSecondarySourceAuthArgs struct {
	// The resource value that applies to the specified authorization type.
	Resource pulumi.StringPtrInput `pulumi:"resource"`
	// The authorization type to use. The only valid value is `OAUTH`
	Type pulumi.StringInput `pulumi:"type"`
}

func (ProjectSecondarySourceAuthArgs) ElementType 

func (ProjectSecondarySourceAuthArgs) ElementType() reflect.Type

func (ProjectSecondarySourceAuthArgs) ToProjectSecondarySourceAuthOutput 

func (i ProjectSecondarySourceAuthArgs) ToProjectSecondarySourceAuthOutput() ProjectSecondarySourceAuthOutput

func (ProjectSecondarySourceAuthArgs) ToProjectSecondarySourceAuthOutputWithContext 

func (i ProjectSecondarySourceAuthArgs) ToProjectSecondarySourceAuthOutputWithContext(ctx context.Context) ProjectSecondarySourceAuthOutput

type ProjectSecondarySourceAuthArray 

type ProjectSecondarySourceAuthArray []ProjectSecondarySourceAuthInput

func (ProjectSecondarySourceAuthArray) ElementType 

func (ProjectSecondarySourceAuthArray) ElementType() reflect.Type

func (ProjectSecondarySourceAuthArray) ToProjectSecondarySourceAuthArrayOutput 

func (i ProjectSecondarySourceAuthArray) ToProjectSecondarySourceAuthArrayOutput() ProjectSecondarySourceAuthArrayOutput

func (ProjectSecondarySourceAuthArray) ToProjectSecondarySourceAuthArrayOutputWithContext 

func (i ProjectSecondarySourceAuthArray) ToProjectSecondarySourceAuthArrayOutputWithContext(ctx context.Context) ProjectSecondarySourceAuthArrayOutput

type ProjectSecondarySourceAuthArrayInput 

type ProjectSecondarySourceAuthArrayInput interface {
	pulumi.Input

	ToProjectSecondarySourceAuthArrayOutput() ProjectSecondarySourceAuthArrayOutput
	ToProjectSecondarySourceAuthArrayOutputWithContext(context.Context) ProjectSecondarySourceAuthArrayOutput
}

ProjectSecondarySourceAuthArrayInput is an input type that accepts ProjectSecondarySourceAuthArray and ProjectSecondarySourceAuthArrayOutput values. You can construct a concrete instance of `ProjectSecondarySourceAuthArrayInput` via: 

ProjectSecondarySourceAuthArray{ ProjectSecondarySourceAuthArgs{...} }

type ProjectSecondarySourceAuthArrayOutput 

type ProjectSecondarySourceAuthArrayOutput struct{ *pulumi.OutputState }

func (ProjectSecondarySourceAuthArrayOutput) ElementType 

func (ProjectSecondarySourceAuthArrayOutput) ElementType() reflect.Type

func (ProjectSecondarySourceAuthArrayOutput) Index 

func (o ProjectSecondarySourceAuthArrayOutput) Index(i pulumi.IntInput) ProjectSecondarySourceAuthOutput

func (ProjectSecondarySourceAuthArrayOutput) ToProjectSecondarySourceAuthArrayOutput 

func (o ProjectSecondarySourceAuthArrayOutput) ToProjectSecondarySourceAuthArrayOutput() ProjectSecondarySourceAuthArrayOutput

func (ProjectSecondarySourceAuthArrayOutput) ToProjectSecondarySourceAuthArrayOutputWithContext 

func (o ProjectSecondarySourceAuthArrayOutput) ToProjectSecondarySourceAuthArrayOutputWithContext(ctx context.Context) ProjectSecondarySourceAuthArrayOutput

type ProjectSecondarySourceAuthInput 

type ProjectSecondarySourceAuthInput interface {
	pulumi.Input

	ToProjectSecondarySourceAuthOutput() ProjectSecondarySourceAuthOutput
	ToProjectSecondarySourceAuthOutputWithContext(context.Context) ProjectSecondarySourceAuthOutput
}

ProjectSecondarySourceAuthInput is an input type that accepts ProjectSecondarySourceAuthArgs and ProjectSecondarySourceAuthOutput values. You can construct a concrete instance of `ProjectSecondarySourceAuthInput` via: 

ProjectSecondarySourceAuthArgs{...}

type ProjectSecondarySourceAuthOutput 

type ProjectSecondarySourceAuthOutput struct{ *pulumi.OutputState }

func (ProjectSecondarySourceAuthOutput) ElementType 

func (ProjectSecondarySourceAuthOutput) ElementType() reflect.Type

func (ProjectSecondarySourceAuthOutput) Resource 

func (o ProjectSecondarySourceAuthOutput) Resource() pulumi.StringPtrOutput

The resource value that applies to the specified authorization type.

func (ProjectSecondarySourceAuthOutput) ToProjectSecondarySourceAuthOutput 

func (o ProjectSecondarySourceAuthOutput) ToProjectSecondarySourceAuthOutput() ProjectSecondarySourceAuthOutput

func (ProjectSecondarySourceAuthOutput) ToProjectSecondarySourceAuthOutputWithContext 

func (o ProjectSecondarySourceAuthOutput) ToProjectSecondarySourceAuthOutputWithContext(ctx context.Context) ProjectSecondarySourceAuthOutput

func (ProjectSecondarySourceAuthOutput) Type 

func (o ProjectSecondarySourceAuthOutput) Type() pulumi.StringOutput

The authorization type to use. The only valid value is `OAUTH`

type ProjectSecondarySourceGitSubmodulesConfig 

type ProjectSecondarySourceGitSubmodulesConfig struct {
	// If set to true, fetches Git submodules for the AWS CodeBuild build project.
	FetchSubmodules bool `pulumi:"fetchSubmodules"`
}

type ProjectSecondarySourceGitSubmodulesConfigArgs 

type ProjectSecondarySourceGitSubmodulesConfigArgs struct {
	// If set to true, fetches Git submodules for the AWS CodeBuild build project.
	FetchSubmodules pulumi.BoolInput `pulumi:"fetchSubmodules"`
}

func (ProjectSecondarySourceGitSubmodulesConfigArgs) ElementType 

func (ProjectSecondarySourceGitSubmodulesConfigArgs) ElementType() reflect.Type

func (ProjectSecondarySourceGitSubmodulesConfigArgs) ToProjectSecondarySourceGitSubmodulesConfigOutput 

func (i ProjectSecondarySourceGitSubmodulesConfigArgs) ToProjectSecondarySourceGitSubmodulesConfigOutput() ProjectSecondarySourceGitSubmodulesConfigOutput

func (ProjectSecondarySourceGitSubmodulesConfigArgs) ToProjectSecondarySourceGitSubmodulesConfigOutputWithContext 

func (i ProjectSecondarySourceGitSubmodulesConfigArgs) ToProjectSecondarySourceGitSubmodulesConfigOutputWithContext(ctx context.Context) ProjectSecondarySourceGitSubmodulesConfigOutput

func (ProjectSecondarySourceGitSubmodulesConfigArgs) ToProjectSecondarySourceGitSubmodulesConfigPtrOutput 

func (i ProjectSecondarySourceGitSubmodulesConfigArgs) ToProjectSecondarySourceGitSubmodulesConfigPtrOutput() ProjectSecondarySourceGitSubmodulesConfigPtrOutput

func (ProjectSecondarySourceGitSubmodulesConfigArgs) ToProjectSecondarySourceGitSubmodulesConfigPtrOutputWithContext 

func (i ProjectSecondarySourceGitSubmodulesConfigArgs) ToProjectSecondarySourceGitSubmodulesConfigPtrOutputWithContext(ctx context.Context) ProjectSecondarySourceGitSubmodulesConfigPtrOutput

type ProjectSecondarySourceGitSubmodulesConfigInput 

type ProjectSecondarySourceGitSubmodulesConfigInput interface {
	pulumi.Input

	ToProjectSecondarySourceGitSubmodulesConfigOutput() ProjectSecondarySourceGitSubmodulesConfigOutput
	ToProjectSecondarySourceGitSubmodulesConfigOutputWithContext(context.Context) ProjectSecondarySourceGitSubmodulesConfigOutput
}

ProjectSecondarySourceGitSubmodulesConfigInput is an input type that accepts ProjectSecondarySourceGitSubmodulesConfigArgs and ProjectSecondarySourceGitSubmodulesConfigOutput values. You can construct a concrete instance of `ProjectSecondarySourceGitSubmodulesConfigInput` via: 

ProjectSecondarySourceGitSubmodulesConfigArgs{...}

type ProjectSecondarySourceGitSubmodulesConfigOutput 

type ProjectSecondarySourceGitSubmodulesConfigOutput struct{ *pulumi.OutputState }

func (ProjectSecondarySourceGitSubmodulesConfigOutput) ElementType 

func (ProjectSecondarySourceGitSubmodulesConfigOutput) ElementType() reflect.Type

func (ProjectSecondarySourceGitSubmodulesConfigOutput) FetchSubmodules 

func (o ProjectSecondarySourceGitSubmodulesConfigOutput) FetchSubmodules() pulumi.BoolOutput

If set to true, fetches Git submodules for the AWS CodeBuild build project.

func (ProjectSecondarySourceGitSubmodulesConfigOutput) ToProjectSecondarySourceGitSubmodulesConfigOutput 

func (o ProjectSecondarySourceGitSubmodulesConfigOutput) ToProjectSecondarySourceGitSubmodulesConfigOutput() ProjectSecondarySourceGitSubmodulesConfigOutput

func (ProjectSecondarySourceGitSubmodulesConfigOutput) ToProjectSecondarySourceGitSubmodulesConfigOutputWithContext 

func (o ProjectSecondarySourceGitSubmodulesConfigOutput) ToProjectSecondarySourceGitSubmodulesConfigOutputWithContext(ctx context.Context) ProjectSecondarySourceGitSubmodulesConfigOutput

func (ProjectSecondarySourceGitSubmodulesConfigOutput) ToProjectSecondarySourceGitSubmodulesConfigPtrOutput 

func (o ProjectSecondarySourceGitSubmodulesConfigOutput) ToProjectSecondarySourceGitSubmodulesConfigPtrOutput() ProjectSecondarySourceGitSubmodulesConfigPtrOutput

func (ProjectSecondarySourceGitSubmodulesConfigOutput) ToProjectSecondarySourceGitSubmodulesConfigPtrOutputWithContext 

func (o ProjectSecondarySourceGitSubmodulesConfigOutput) ToProjectSecondarySourceGitSubmodulesConfigPtrOutputWithContext(ctx context.Context) ProjectSecondarySourceGitSubmodulesConfigPtrOutput

type ProjectSecondarySourceGitSubmodulesConfigPtrInput 

type ProjectSecondarySourceGitSubmodulesConfigPtrInput interface {
	pulumi.Input

	ToProjectSecondarySourceGitSubmodulesConfigPtrOutput() ProjectSecondarySourceGitSubmodulesConfigPtrOutput
	ToProjectSecondarySourceGitSubmodulesConfigPtrOutputWithContext(context.Context) ProjectSecondarySourceGitSubmodulesConfigPtrOutput
}

ProjectSecondarySourceGitSubmodulesConfigPtrInput is an input type that accepts ProjectSecondarySourceGitSubmodulesConfigArgs, ProjectSecondarySourceGitSubmodulesConfigPtr and ProjectSecondarySourceGitSubmodulesConfigPtrOutput values. You can construct a concrete instance of `ProjectSecondarySourceGitSubmodulesConfigPtrInput` via: 

        ProjectSecondarySourceGitSubmodulesConfigArgs{...}

or:

        nil

func ProjectSecondarySourceGitSubmodulesConfigPtr 

func ProjectSecondarySourceGitSubmodulesConfigPtr(v *ProjectSecondarySourceGitSubmodulesConfigArgs) ProjectSecondarySourceGitSubmodulesConfigPtrInput

type ProjectSecondarySourceGitSubmodulesConfigPtrOutput 

type ProjectSecondarySourceGitSubmodulesConfigPtrOutput struct{ *pulumi.OutputState }

func (ProjectSecondarySourceGitSubmodulesConfigPtrOutput) Elem 

func (o ProjectSecondarySourceGitSubmodulesConfigPtrOutput) Elem() ProjectSecondarySourceGitSubmodulesConfigOutput

func (ProjectSecondarySourceGitSubmodulesConfigPtrOutput) ElementType 

func (ProjectSecondarySourceGitSubmodulesConfigPtrOutput) ElementType() reflect.Type

func (ProjectSecondarySourceGitSubmodulesConfigPtrOutput) FetchSubmodules 

func (o ProjectSecondarySourceGitSubmodulesConfigPtrOutput) FetchSubmodules() pulumi.BoolPtrOutput

If set to true, fetches Git submodules for the AWS CodeBuild build project.

func (ProjectSecondarySourceGitSubmodulesConfigPtrOutput) ToProjectSecondarySourceGitSubmodulesConfigPtrOutput 

func (o ProjectSecondarySourceGitSubmodulesConfigPtrOutput) ToProjectSecondarySourceGitSubmodulesConfigPtrOutput() ProjectSecondarySourceGitSubmodulesConfigPtrOutput

func (ProjectSecondarySourceGitSubmodulesConfigPtrOutput) ToProjectSecondarySourceGitSubmodulesConfigPtrOutputWithContext 

func (o ProjectSecondarySourceGitSubmodulesConfigPtrOutput) ToProjectSecondarySourceGitSubmodulesConfigPtrOutputWithContext(ctx context.Context) ProjectSecondarySourceGitSubmodulesConfigPtrOutput

type ProjectSecondarySourceInput 

type ProjectSecondarySourceInput interface {
	pulumi.Input

	ToProjectSecondarySourceOutput() ProjectSecondarySourceOutput
	ToProjectSecondarySourceOutputWithContext(context.Context) ProjectSecondarySourceOutput
}

ProjectSecondarySourceInput is an input type that accepts ProjectSecondarySourceArgs and ProjectSecondarySourceOutput values. You can construct a concrete instance of `ProjectSecondarySourceInput` via: 

ProjectSecondarySourceArgs{...}

type ProjectSecondarySourceOutput 

type ProjectSecondarySourceOutput struct{ *pulumi.OutputState }

func (ProjectSecondarySourceOutput) Auths 

func (o ProjectSecondarySourceOutput) Auths() ProjectSecondarySourceAuthArrayOutput

Information about the authorization settings for AWS CodeBuild to access the source code to be built. Auth blocks are documented below.

func (ProjectSecondarySourceOutput) Buildspec 

func (o ProjectSecondarySourceOutput) Buildspec() pulumi.StringPtrOutput

The build spec declaration to use for this build project's related builds.

func (ProjectSecondarySourceOutput) ElementType 

func (ProjectSecondarySourceOutput) ElementType() reflect.Type

func (ProjectSecondarySourceOutput) GitCloneDepth 

func (o ProjectSecondarySourceOutput) GitCloneDepth() pulumi.IntPtrOutput

Truncate git history to this many commits.

func (ProjectSecondarySourceOutput) GitSubmodulesConfig 

func (o ProjectSecondarySourceOutput) GitSubmodulesConfig() ProjectSecondarySourceGitSubmodulesConfigPtrOutput

Information about the Git submodules configuration for an AWS CodeBuild build project. Git submodules config blocks are documented below. This option is only valid when the `type` is `CODECOMMIT`, `GITHUB` or `GITHUB_ENTERPRISE`.

func (ProjectSecondarySourceOutput) InsecureSsl 

func (o ProjectSecondarySourceOutput) InsecureSsl() pulumi.BoolPtrOutput

Ignore SSL warnings when connecting to source control.

func (ProjectSecondarySourceOutput) Location 

func (o ProjectSecondarySourceOutput) Location() pulumi.StringPtrOutput

The location of the source code from git or s3.

func (ProjectSecondarySourceOutput) ReportBuildStatus 

func (o ProjectSecondarySourceOutput) ReportBuildStatus() pulumi.BoolPtrOutput

Set to `true` to report the status of a build's start and finish to your source provider. This option is only valid when your source provider is `GITHUB`, `BITBUCKET`, or `GITHUB_ENTERPRISE`.

func (ProjectSecondarySourceOutput) SourceIdentifier 

func (o ProjectSecondarySourceOutput) SourceIdentifier() pulumi.StringOutput

The source identifier. Source data will be put inside a folder named as this parameter inside AWS CodeBuild source directory

func (ProjectSecondarySourceOutput) ToProjectSecondarySourceOutput 

func (o ProjectSecondarySourceOutput) ToProjectSecondarySourceOutput() ProjectSecondarySourceOutput

func (ProjectSecondarySourceOutput) ToProjectSecondarySourceOutputWithContext 

func (o ProjectSecondarySourceOutput) ToProjectSecondarySourceOutputWithContext(ctx context.Context) ProjectSecondarySourceOutput

func (ProjectSecondarySourceOutput) Type 

func (o ProjectSecondarySourceOutput) Type() pulumi.StringOutput

The type of repository that contains the source code to be built. Valid values for this parameter are: `CODECOMMIT`, `CODEPIPELINE`, `GITHUB`, `GITHUB_ENTERPRISE`, `BITBUCKET` or `S3`.

type ProjectSource 

type ProjectSource struct {
	// Information about the authorization settings for AWS CodeBuild to access the source code to be built. Auth blocks are documented below.
	Auths []ProjectSourceAuth `pulumi:"auths"`
	// The build spec declaration to use for this build project's related builds. This must be set when `type` is `NO_SOURCE`.
	Buildspec *string `pulumi:"buildspec"`
	// Truncate git history to this many commits.
	GitCloneDepth *int `pulumi:"gitCloneDepth"`
	// Information about the Git submodules configuration for an AWS CodeBuild build project. Git submodules config blocks are documented below. This option is only valid when the `type` is `CODECOMMIT`, `GITHUB` or `GITHUB_ENTERPRISE`.
	GitSubmodulesConfig *ProjectSourceGitSubmodulesConfig `pulumi:"gitSubmodulesConfig"`
	// Ignore SSL warnings when connecting to source control.
	InsecureSsl *bool `pulumi:"insecureSsl"`
	// The location of the source code from git or s3.
	Location *string `pulumi:"location"`
	// Set to `true` to report the status of a build's start and finish to your source provider. This option is only valid when the `type` is `BITBUCKET` or `GITHUB`.
	ReportBuildStatus *bool `pulumi:"reportBuildStatus"`
	// The type of repository that contains the source code to be built. Valid values for this parameter are: `CODECOMMIT`, `CODEPIPELINE`, `GITHUB`, `GITHUB_ENTERPRISE`, `BITBUCKET`, `S3` or `NO_SOURCE`.
	Type string `pulumi:"type"`
}

type ProjectSourceArgs 

type ProjectSourceArgs struct {
	// Information about the authorization settings for AWS CodeBuild to access the source code to be built. Auth blocks are documented below.
	Auths ProjectSourceAuthArrayInput `pulumi:"auths"`
	// The build spec declaration to use for this build project's related builds. This must be set when `type` is `NO_SOURCE`.
	Buildspec pulumi.StringPtrInput `pulumi:"buildspec"`
	// Truncate git history to this many commits.
	GitCloneDepth pulumi.IntPtrInput `pulumi:"gitCloneDepth"`
	// Information about the Git submodules configuration for an AWS CodeBuild build project. Git submodules config blocks are documented below. This option is only valid when the `type` is `CODECOMMIT`, `GITHUB` or `GITHUB_ENTERPRISE`.
	GitSubmodulesConfig ProjectSourceGitSubmodulesConfigPtrInput `pulumi:"gitSubmodulesConfig"`
	// Ignore SSL warnings when connecting to source control.
	InsecureSsl pulumi.BoolPtrInput `pulumi:"insecureSsl"`
	// The location of the source code from git or s3.
	Location pulumi.StringPtrInput `pulumi:"location"`
	// Set to `true` to report the status of a build's start and finish to your source provider. This option is only valid when the `type` is `BITBUCKET` or `GITHUB`.
	ReportBuildStatus pulumi.BoolPtrInput `pulumi:"reportBuildStatus"`
	// The type of repository that contains the source code to be built. Valid values for this parameter are: `CODECOMMIT`, `CODEPIPELINE`, `GITHUB`, `GITHUB_ENTERPRISE`, `BITBUCKET`, `S3` or `NO_SOURCE`.
	Type pulumi.StringInput `pulumi:"type"`
}

func (ProjectSourceArgs) ElementType 

func (ProjectSourceArgs) ElementType() reflect.Type

func (ProjectSourceArgs) ToProjectSourceOutput 

func (i ProjectSourceArgs) ToProjectSourceOutput() ProjectSourceOutput

func (ProjectSourceArgs) ToProjectSourceOutputWithContext 

func (i ProjectSourceArgs) ToProjectSourceOutputWithContext(ctx context.Context) ProjectSourceOutput

func (ProjectSourceArgs) ToProjectSourcePtrOutput 

func (i ProjectSourceArgs) ToProjectSourcePtrOutput() ProjectSourcePtrOutput

func (ProjectSourceArgs) ToProjectSourcePtrOutputWithContext 

func (i ProjectSourceArgs) ToProjectSourcePtrOutputWithContext(ctx context.Context) ProjectSourcePtrOutput

type ProjectSourceAuth 

type ProjectSourceAuth struct {
	// The resource value that applies to the specified authorization type.
	Resource *string `pulumi:"resource"`
	// The authorization type to use. The only valid value is `OAUTH`
	Type string `pulumi:"type"`
}

type ProjectSourceAuthArgs 

type ProjectSourceAuthArgs struct {
	// The resource value that applies to the specified authorization type.
	Resource pulumi.StringPtrInput `pulumi:"resource"`
	// The authorization type to use. The only valid value is `OAUTH`
	Type pulumi.StringInput `pulumi:"type"`
}

func (ProjectSourceAuthArgs) ElementType 

func (ProjectSourceAuthArgs) ElementType() reflect.Type

func (ProjectSourceAuthArgs) ToProjectSourceAuthOutput 

func (i ProjectSourceAuthArgs) ToProjectSourceAuthOutput() ProjectSourceAuthOutput

func (ProjectSourceAuthArgs) ToProjectSourceAuthOutputWithContext 

func (i ProjectSourceAuthArgs) ToProjectSourceAuthOutputWithContext(ctx context.Context) ProjectSourceAuthOutput

type ProjectSourceAuthArray 

type ProjectSourceAuthArray []ProjectSourceAuthInput

func (ProjectSourceAuthArray) ElementType 

func (ProjectSourceAuthArray) ElementType() reflect.Type

func (ProjectSourceAuthArray) ToProjectSourceAuthArrayOutput 

func (i ProjectSourceAuthArray) ToProjectSourceAuthArrayOutput() ProjectSourceAuthArrayOutput

func (ProjectSourceAuthArray) ToProjectSourceAuthArrayOutputWithContext 

func (i ProjectSourceAuthArray) ToProjectSourceAuthArrayOutputWithContext(ctx context.Context) ProjectSourceAuthArrayOutput

type ProjectSourceAuthArrayInput 

type ProjectSourceAuthArrayInput interface {
	pulumi.Input

	ToProjectSourceAuthArrayOutput() ProjectSourceAuthArrayOutput
	ToProjectSourceAuthArrayOutputWithContext(context.Context) ProjectSourceAuthArrayOutput
}

ProjectSourceAuthArrayInput is an input type that accepts ProjectSourceAuthArray and ProjectSourceAuthArrayOutput values. You can construct a concrete instance of `ProjectSourceAuthArrayInput` via: 

ProjectSourceAuthArray{ ProjectSourceAuthArgs{...} }

type ProjectSourceAuthArrayOutput 

type ProjectSourceAuthArrayOutput struct{ *pulumi.OutputState }

func (ProjectSourceAuthArrayOutput) ElementType 

func (ProjectSourceAuthArrayOutput) ElementType() reflect.Type

func (ProjectSourceAuthArrayOutput) Index 

func (o ProjectSourceAuthArrayOutput) Index(i pulumi.IntInput) ProjectSourceAuthOutput

func (ProjectSourceAuthArrayOutput) ToProjectSourceAuthArrayOutput 

func (o ProjectSourceAuthArrayOutput) ToProjectSourceAuthArrayOutput() ProjectSourceAuthArrayOutput

func (ProjectSourceAuthArrayOutput) ToProjectSourceAuthArrayOutputWithContext 

func (o ProjectSourceAuthArrayOutput) ToProjectSourceAuthArrayOutputWithContext(ctx context.Context) ProjectSourceAuthArrayOutput

type ProjectSourceAuthInput 

type ProjectSourceAuthInput interface {
	pulumi.Input

	ToProjectSourceAuthOutput() ProjectSourceAuthOutput
	ToProjectSourceAuthOutputWithContext(context.Context) ProjectSourceAuthOutput
}

ProjectSourceAuthInput is an input type that accepts ProjectSourceAuthArgs and ProjectSourceAuthOutput values. You can construct a concrete instance of `ProjectSourceAuthInput` via: 

ProjectSourceAuthArgs{...}

type ProjectSourceAuthOutput 

type ProjectSourceAuthOutput struct{ *pulumi.OutputState }

func (ProjectSourceAuthOutput) ElementType 

func (ProjectSourceAuthOutput) ElementType() reflect.Type

func (ProjectSourceAuthOutput) Resource 

func (o ProjectSourceAuthOutput) Resource() pulumi.StringPtrOutput

The resource value that applies to the specified authorization type.

func (ProjectSourceAuthOutput) ToProjectSourceAuthOutput 

func (o ProjectSourceAuthOutput) ToProjectSourceAuthOutput() ProjectSourceAuthOutput

func (ProjectSourceAuthOutput) ToProjectSourceAuthOutputWithContext 

func (o ProjectSourceAuthOutput) ToProjectSourceAuthOutputWithContext(ctx context.Context) ProjectSourceAuthOutput

func (ProjectSourceAuthOutput) Type 

func (o ProjectSourceAuthOutput) Type() pulumi.StringOutput

The authorization type to use. The only valid value is `OAUTH`

type ProjectSourceGitSubmodulesConfig 

type ProjectSourceGitSubmodulesConfig struct {
	// If set to true, fetches Git submodules for the AWS CodeBuild build project.
	FetchSubmodules bool `pulumi:"fetchSubmodules"`
}

type ProjectSourceGitSubmodulesConfigArgs 

type ProjectSourceGitSubmodulesConfigArgs struct {
	// If set to true, fetches Git submodules for the AWS CodeBuild build project.
	FetchSubmodules pulumi.BoolInput `pulumi:"fetchSubmodules"`
}

func (ProjectSourceGitSubmodulesConfigArgs) ElementType 

func (ProjectSourceGitSubmodulesConfigArgs) ElementType() reflect.Type

func (ProjectSourceGitSubmodulesConfigArgs) ToProjectSourceGitSubmodulesConfigOutput 

func (i ProjectSourceGitSubmodulesConfigArgs) ToProjectSourceGitSubmodulesConfigOutput() ProjectSourceGitSubmodulesConfigOutput

func (ProjectSourceGitSubmodulesConfigArgs) ToProjectSourceGitSubmodulesConfigOutputWithContext 

func (i ProjectSourceGitSubmodulesConfigArgs) ToProjectSourceGitSubmodulesConfigOutputWithContext(ctx context.Context) ProjectSourceGitSubmodulesConfigOutput

func (ProjectSourceGitSubmodulesConfigArgs) ToProjectSourceGitSubmodulesConfigPtrOutput 

func (i ProjectSourceGitSubmodulesConfigArgs) ToProjectSourceGitSubmodulesConfigPtrOutput() ProjectSourceGitSubmodulesConfigPtrOutput

func (ProjectSourceGitSubmodulesConfigArgs) ToProjectSourceGitSubmodulesConfigPtrOutputWithContext 

func (i ProjectSourceGitSubmodulesConfigArgs) ToProjectSourceGitSubmodulesConfigPtrOutputWithContext(ctx context.Context) ProjectSourceGitSubmodulesConfigPtrOutput

type ProjectSourceGitSubmodulesConfigInput 

type ProjectSourceGitSubmodulesConfigInput interface {
	pulumi.Input

	ToProjectSourceGitSubmodulesConfigOutput() ProjectSourceGitSubmodulesConfigOutput
	ToProjectSourceGitSubmodulesConfigOutputWithContext(context.Context) ProjectSourceGitSubmodulesConfigOutput
}

ProjectSourceGitSubmodulesConfigInput is an input type that accepts ProjectSourceGitSubmodulesConfigArgs and ProjectSourceGitSubmodulesConfigOutput values. You can construct a concrete instance of `ProjectSourceGitSubmodulesConfigInput` via: 

ProjectSourceGitSubmodulesConfigArgs{...}

type ProjectSourceGitSubmodulesConfigOutput 

type ProjectSourceGitSubmodulesConfigOutput struct{ *pulumi.OutputState }

func (ProjectSourceGitSubmodulesConfigOutput) ElementType 

func (ProjectSourceGitSubmodulesConfigOutput) ElementType() reflect.Type

func (ProjectSourceGitSubmodulesConfigOutput) FetchSubmodules 

func (o ProjectSourceGitSubmodulesConfigOutput) FetchSubmodules() pulumi.BoolOutput

If set to true, fetches Git submodules for the AWS CodeBuild build project.

func (ProjectSourceGitSubmodulesConfigOutput) ToProjectSourceGitSubmodulesConfigOutput 

func (o ProjectSourceGitSubmodulesConfigOutput) ToProjectSourceGitSubmodulesConfigOutput() ProjectSourceGitSubmodulesConfigOutput

func (ProjectSourceGitSubmodulesConfigOutput) ToProjectSourceGitSubmodulesConfigOutputWithContext 

func (o ProjectSourceGitSubmodulesConfigOutput) ToProjectSourceGitSubmodulesConfigOutputWithContext(ctx context.Context) ProjectSourceGitSubmodulesConfigOutput

func (ProjectSourceGitSubmodulesConfigOutput) ToProjectSourceGitSubmodulesConfigPtrOutput 

func (o ProjectSourceGitSubmodulesConfigOutput) ToProjectSourceGitSubmodulesConfigPtrOutput() ProjectSourceGitSubmodulesConfigPtrOutput

func (ProjectSourceGitSubmodulesConfigOutput) ToProjectSourceGitSubmodulesConfigPtrOutputWithContext 

func (o ProjectSourceGitSubmodulesConfigOutput) ToProjectSourceGitSubmodulesConfigPtrOutputWithContext(ctx context.Context) ProjectSourceGitSubmodulesConfigPtrOutput

type ProjectSourceGitSubmodulesConfigPtrInput 

type ProjectSourceGitSubmodulesConfigPtrInput interface {
	pulumi.Input

	ToProjectSourceGitSubmodulesConfigPtrOutput() ProjectSourceGitSubmodulesConfigPtrOutput
	ToProjectSourceGitSubmodulesConfigPtrOutputWithContext(context.Context) ProjectSourceGitSubmodulesConfigPtrOutput
}

ProjectSourceGitSubmodulesConfigPtrInput is an input type that accepts ProjectSourceGitSubmodulesConfigArgs, ProjectSourceGitSubmodulesConfigPtr and ProjectSourceGitSubmodulesConfigPtrOutput values. You can construct a concrete instance of `ProjectSourceGitSubmodulesConfigPtrInput` via: 

        ProjectSourceGitSubmodulesConfigArgs{...}

or:

        nil

func ProjectSourceGitSubmodulesConfigPtr 

func ProjectSourceGitSubmodulesConfigPtr(v *ProjectSourceGitSubmodulesConfigArgs) ProjectSourceGitSubmodulesConfigPtrInput

type ProjectSourceGitSubmodulesConfigPtrOutput 

type ProjectSourceGitSubmodulesConfigPtrOutput struct{ *pulumi.OutputState }

func (ProjectSourceGitSubmodulesConfigPtrOutput) Elem 

func (o ProjectSourceGitSubmodulesConfigPtrOutput) Elem() ProjectSourceGitSubmodulesConfigOutput

func (ProjectSourceGitSubmodulesConfigPtrOutput) ElementType 

func (ProjectSourceGitSubmodulesConfigPtrOutput) ElementType() reflect.Type

func (ProjectSourceGitSubmodulesConfigPtrOutput) FetchSubmodules 

func (o ProjectSourceGitSubmodulesConfigPtrOutput) FetchSubmodules() pulumi.BoolPtrOutput

If set to true, fetches Git submodules for the AWS CodeBuild build project.

func (ProjectSourceGitSubmodulesConfigPtrOutput) ToProjectSourceGitSubmodulesConfigPtrOutput 

func (o ProjectSourceGitSubmodulesConfigPtrOutput) ToProjectSourceGitSubmodulesConfigPtrOutput() ProjectSourceGitSubmodulesConfigPtrOutput

func (ProjectSourceGitSubmodulesConfigPtrOutput) ToProjectSourceGitSubmodulesConfigPtrOutputWithContext 

func (o ProjectSourceGitSubmodulesConfigPtrOutput) ToProjectSourceGitSubmodulesConfigPtrOutputWithContext(ctx context.Context) ProjectSourceGitSubmodulesConfigPtrOutput

type ProjectSourceInput 

type ProjectSourceInput interface {
	pulumi.Input

	ToProjectSourceOutput() ProjectSourceOutput
	ToProjectSourceOutputWithContext(context.Context) ProjectSourceOutput
}

ProjectSourceInput is an input type that accepts ProjectSourceArgs and ProjectSourceOutput values. You can construct a concrete instance of `ProjectSourceInput` via: 

ProjectSourceArgs{...}

type ProjectSourceOutput 

type ProjectSourceOutput struct{ *pulumi.OutputState }

func (ProjectSourceOutput) Auths 

func (o ProjectSourceOutput) Auths() ProjectSourceAuthArrayOutput

Information about the authorization settings for AWS CodeBuild to access the source code to be built. Auth blocks are documented below.

func (ProjectSourceOutput) Buildspec 

func (o ProjectSourceOutput) Buildspec() pulumi.StringPtrOutput

The build spec declaration to use for this build project's related builds. This must be set when `type` is `NO_SOURCE`.

func (ProjectSourceOutput) ElementType 

func (ProjectSourceOutput) ElementType() reflect.Type

func (ProjectSourceOutput) GitCloneDepth 

func (o ProjectSourceOutput) GitCloneDepth() pulumi.IntPtrOutput

Truncate git history to this many commits.

func (ProjectSourceOutput) GitSubmodulesConfig 

func (o ProjectSourceOutput) GitSubmodulesConfig() ProjectSourceGitSubmodulesConfigPtrOutput

Information about the Git submodules configuration for an AWS CodeBuild build project. Git submodules config blocks are documented below. This option is only valid when the `type` is `CODECOMMIT`, `GITHUB` or `GITHUB_ENTERPRISE`.

func (ProjectSourceOutput) InsecureSsl 

func (o ProjectSourceOutput) InsecureSsl() pulumi.BoolPtrOutput

Ignore SSL warnings when connecting to source control.

func (ProjectSourceOutput) Location 

func (o ProjectSourceOutput) Location() pulumi.StringPtrOutput

The location of the source code from git or s3.

func (ProjectSourceOutput) ReportBuildStatus 

func (o ProjectSourceOutput) ReportBuildStatus() pulumi.BoolPtrOutput

Set to `true` to report the status of a build's start and finish to your source provider. This option is only valid when the `type` is `BITBUCKET` or `GITHUB`.

func (ProjectSourceOutput) ToProjectSourceOutput 

func (o ProjectSourceOutput) ToProjectSourceOutput() ProjectSourceOutput

func (ProjectSourceOutput) ToProjectSourceOutputWithContext 

func (o ProjectSourceOutput) ToProjectSourceOutputWithContext(ctx context.Context) ProjectSourceOutput

func (ProjectSourceOutput) ToProjectSourcePtrOutput 

func (o ProjectSourceOutput) ToProjectSourcePtrOutput() ProjectSourcePtrOutput

func (ProjectSourceOutput) ToProjectSourcePtrOutputWithContext 

func (o ProjectSourceOutput) ToProjectSourcePtrOutputWithContext(ctx context.Context) ProjectSourcePtrOutput

func (ProjectSourceOutput) Type 

func (o ProjectSourceOutput) Type() pulumi.StringOutput

The type of repository that contains the source code to be built. Valid values for this parameter are: `CODECOMMIT`, `CODEPIPELINE`, `GITHUB`, `GITHUB_ENTERPRISE`, `BITBUCKET`, `S3` or `NO_SOURCE`.

type ProjectSourcePtrInput 

type ProjectSourcePtrInput interface {
	pulumi.Input

	ToProjectSourcePtrOutput() ProjectSourcePtrOutput
	ToProjectSourcePtrOutputWithContext(context.Context) ProjectSourcePtrOutput
}

ProjectSourcePtrInput is an input type that accepts ProjectSourceArgs, ProjectSourcePtr and ProjectSourcePtrOutput values. You can construct a concrete instance of `ProjectSourcePtrInput` via: 

        ProjectSourceArgs{...}

or:

        nil

func ProjectSourcePtr 

func ProjectSourcePtr(v *ProjectSourceArgs) ProjectSourcePtrInput

type ProjectSourcePtrOutput 

type ProjectSourcePtrOutput struct{ *pulumi.OutputState }

func (ProjectSourcePtrOutput) Auths 

func (o ProjectSourcePtrOutput) Auths() ProjectSourceAuthArrayOutput

Information about the authorization settings for AWS CodeBuild to access the source code to be built. Auth blocks are documented below.

func (ProjectSourcePtrOutput) Buildspec 

func (o ProjectSourcePtrOutput) Buildspec() pulumi.StringPtrOutput

The build spec declaration to use for this build project's related builds. This must be set when `type` is `NO_SOURCE`.

func (ProjectSourcePtrOutput) Elem 

func (o ProjectSourcePtrOutput) Elem() ProjectSourceOutput

func (ProjectSourcePtrOutput) ElementType 

func (ProjectSourcePtrOutput) ElementType() reflect.Type

func (ProjectSourcePtrOutput) GitCloneDepth 

func (o ProjectSourcePtrOutput) GitCloneDepth() pulumi.IntPtrOutput

Truncate git history to this many commits.

func (ProjectSourcePtrOutput) GitSubmodulesConfig 

func (o ProjectSourcePtrOutput) GitSubmodulesConfig() ProjectSourceGitSubmodulesConfigPtrOutput

Information about the Git submodules configuration for an AWS CodeBuild build project. Git submodules config blocks are documented below. This option is only valid when the `type` is `CODECOMMIT`, `GITHUB` or `GITHUB_ENTERPRISE`.

func (ProjectSourcePtrOutput) InsecureSsl 

func (o ProjectSourcePtrOutput) InsecureSsl() pulumi.BoolPtrOutput

Ignore SSL warnings when connecting to source control.

func (ProjectSourcePtrOutput) Location 

func (o ProjectSourcePtrOutput) Location() pulumi.StringPtrOutput

The location of the source code from git or s3.

func (ProjectSourcePtrOutput) ReportBuildStatus 

func (o ProjectSourcePtrOutput) ReportBuildStatus() pulumi.BoolPtrOutput

Set to `true` to report the status of a build's start and finish to your source provider. This option is only valid when the `type` is `BITBUCKET` or `GITHUB`.

func (ProjectSourcePtrOutput) ToProjectSourcePtrOutput 

func (o ProjectSourcePtrOutput) ToProjectSourcePtrOutput() ProjectSourcePtrOutput

func (ProjectSourcePtrOutput) ToProjectSourcePtrOutputWithContext 

func (o ProjectSourcePtrOutput) ToProjectSourcePtrOutputWithContext(ctx context.Context) ProjectSourcePtrOutput

func (ProjectSourcePtrOutput) Type 

func (o ProjectSourcePtrOutput) Type() pulumi.StringPtrOutput

The type of repository that contains the source code to be built. Valid values for this parameter are: `CODECOMMIT`, `CODEPIPELINE`, `GITHUB`, `GITHUB_ENTERPRISE`, `BITBUCKET`, `S3` or `NO_SOURCE`.

type ProjectState 

type ProjectState struct {
	// The ARN of the CodeBuild project.
	Arn pulumi.StringPtrInput
	// Information about the project's build output artifacts. Artifact blocks are documented below.
	Artifacts ProjectArtifactsPtrInput
	// Generates a publicly-accessible URL for the projects build badge. Available as `badgeUrl` attribute when enabled.
	BadgeEnabled pulumi.BoolPtrInput
	// The URL of the build badge when `badgeEnabled` is enabled.
	BadgeUrl pulumi.StringPtrInput
	// How long in minutes, from 5 to 480 (8 hours), for AWS CodeBuild to wait until timing out any related build that does not get marked as completed. The default is 60 minutes.
	BuildTimeout pulumi.IntPtrInput
	// Information about the cache storage for the project. Cache blocks are documented below.
	Cache ProjectCachePtrInput
	// A short description of the project.
	Description pulumi.StringPtrInput
	// The AWS Key Management Service (AWS KMS) customer master key (CMK) to be used for encrypting the build project's build output artifacts.
	EncryptionKey pulumi.StringPtrInput
	// Information about the project's build environment. Environment blocks are documented below.
	Environment ProjectEnvironmentPtrInput
	// Configuration for the builds to store log data to CloudWatch or S3.
	LogsConfig ProjectLogsConfigPtrInput
	// The projects name.
	Name pulumi.StringPtrInput
	// How long in minutes, from 5 to 480 (8 hours), a build is allowed to be queued before it times out. The default is 8 hours.
	QueuedTimeout pulumi.IntPtrInput
	// A set of secondary artifacts to be used inside the build. Secondary artifacts blocks are documented below.
	SecondaryArtifacts ProjectSecondaryArtifactArrayInput
	// A set of secondary sources to be used inside the build. Secondary sources blocks are documented below.
	SecondarySources ProjectSecondarySourceArrayInput
	// The Amazon Resource Name (ARN) of the AWS Identity and Access Management (IAM) role that enables AWS CodeBuild to interact with dependent AWS services on behalf of the AWS account.
	ServiceRole pulumi.StringPtrInput
	// Information about the project's input source code. Source blocks are documented below.
	Source ProjectSourcePtrInput
	// A version of the build input to be built for this project. If not specified, the latest version is used.
	SourceVersion pulumi.StringPtrInput
	// A map of tags to assign to the resource.
	Tags pulumi.StringMapInput
	// Configuration for the builds to run inside a VPC. VPC config blocks are documented below.
	VpcConfig ProjectVpcConfigPtrInput
}

func (ProjectState) ElementType 

func (ProjectState) ElementType() reflect.Type

type ProjectVpcConfig 

type ProjectVpcConfig struct {
	// The security group IDs to assign to running builds.
	SecurityGroupIds []string `pulumi:"securityGroupIds"`
	// The subnet IDs within which to run builds.
	Subnets []string `pulumi:"subnets"`
	// The ID of the VPC within which to run builds.
	VpcId string `pulumi:"vpcId"`
}

type ProjectVpcConfigArgs 

type ProjectVpcConfigArgs struct {
	// The security group IDs to assign to running builds.
	SecurityGroupIds pulumi.StringArrayInput `pulumi:"securityGroupIds"`
	// The subnet IDs within which to run builds.
	Subnets pulumi.StringArrayInput `pulumi:"subnets"`
	// The ID of the VPC within which to run builds.
	VpcId pulumi.StringInput `pulumi:"vpcId"`
}

func (ProjectVpcConfigArgs) ElementType 

func (ProjectVpcConfigArgs) ElementType() reflect.Type

func (ProjectVpcConfigArgs) ToProjectVpcConfigOutput 

func (i ProjectVpcConfigArgs) ToProjectVpcConfigOutput() ProjectVpcConfigOutput

func (ProjectVpcConfigArgs) ToProjectVpcConfigOutputWithContext 

func (i ProjectVpcConfigArgs) ToProjectVpcConfigOutputWithContext(ctx context.Context) ProjectVpcConfigOutput

func (ProjectVpcConfigArgs) ToProjectVpcConfigPtrOutput 

func (i ProjectVpcConfigArgs) ToProjectVpcConfigPtrOutput() ProjectVpcConfigPtrOutput

func (ProjectVpcConfigArgs) ToProjectVpcConfigPtrOutputWithContext 

func (i ProjectVpcConfigArgs) ToProjectVpcConfigPtrOutputWithContext(ctx context.Context) ProjectVpcConfigPtrOutput

type ProjectVpcConfigInput 

type ProjectVpcConfigInput interface {
	pulumi.Input

	ToProjectVpcConfigOutput() ProjectVpcConfigOutput
	ToProjectVpcConfigOutputWithContext(context.Context) ProjectVpcConfigOutput
}

ProjectVpcConfigInput is an input type that accepts ProjectVpcConfigArgs and ProjectVpcConfigOutput values. You can construct a concrete instance of `ProjectVpcConfigInput` via: 

ProjectVpcConfigArgs{...}

type ProjectVpcConfigOutput 

type ProjectVpcConfigOutput struct{ *pulumi.OutputState }

func (ProjectVpcConfigOutput) ElementType 

func (ProjectVpcConfigOutput) ElementType() reflect.Type

func (ProjectVpcConfigOutput) SecurityGroupIds 

func (o ProjectVpcConfigOutput) SecurityGroupIds() pulumi.StringArrayOutput

The security group IDs to assign to running builds.

func (ProjectVpcConfigOutput) Subnets 

func (o ProjectVpcConfigOutput) Subnets() pulumi.StringArrayOutput

The subnet IDs within which to run builds.

func (ProjectVpcConfigOutput) ToProjectVpcConfigOutput 

func (o ProjectVpcConfigOutput) ToProjectVpcConfigOutput() ProjectVpcConfigOutput

func (ProjectVpcConfigOutput) ToProjectVpcConfigOutputWithContext 

func (o ProjectVpcConfigOutput) ToProjectVpcConfigOutputWithContext(ctx context.Context) ProjectVpcConfigOutput

func (ProjectVpcConfigOutput) ToProjectVpcConfigPtrOutput 

func (o ProjectVpcConfigOutput) ToProjectVpcConfigPtrOutput() ProjectVpcConfigPtrOutput

func (ProjectVpcConfigOutput) ToProjectVpcConfigPtrOutputWithContext 

func (o ProjectVpcConfigOutput) ToProjectVpcConfigPtrOutputWithContext(ctx context.Context) ProjectVpcConfigPtrOutput

func (ProjectVpcConfigOutput) VpcId 

func (o ProjectVpcConfigOutput) VpcId() pulumi.StringOutput

The ID of the VPC within which to run builds.

type ProjectVpcConfigPtrInput 

type ProjectVpcConfigPtrInput interface {
	pulumi.Input

	ToProjectVpcConfigPtrOutput() ProjectVpcConfigPtrOutput
	ToProjectVpcConfigPtrOutputWithContext(context.Context) ProjectVpcConfigPtrOutput
}

ProjectVpcConfigPtrInput is an input type that accepts ProjectVpcConfigArgs, ProjectVpcConfigPtr and ProjectVpcConfigPtrOutput values. You can construct a concrete instance of `ProjectVpcConfigPtrInput` via: 

        ProjectVpcConfigArgs{...}

or:

        nil

func ProjectVpcConfigPtr 

func ProjectVpcConfigPtr(v *ProjectVpcConfigArgs) ProjectVpcConfigPtrInput

type ProjectVpcConfigPtrOutput 

type ProjectVpcConfigPtrOutput struct{ *pulumi.OutputState }

func (ProjectVpcConfigPtrOutput) Elem 

func (o ProjectVpcConfigPtrOutput) Elem() ProjectVpcConfigOutput

func (ProjectVpcConfigPtrOutput) ElementType 

func (ProjectVpcConfigPtrOutput) ElementType() reflect.Type

func (ProjectVpcConfigPtrOutput) SecurityGroupIds 

func (o ProjectVpcConfigPtrOutput) SecurityGroupIds() pulumi.StringArrayOutput

The security group IDs to assign to running builds.

func (ProjectVpcConfigPtrOutput) Subnets 

func (o ProjectVpcConfigPtrOutput) Subnets() pulumi.StringArrayOutput

The subnet IDs within which to run builds.

func (ProjectVpcConfigPtrOutput) ToProjectVpcConfigPtrOutput 

func (o ProjectVpcConfigPtrOutput) ToProjectVpcConfigPtrOutput() ProjectVpcConfigPtrOutput

func (ProjectVpcConfigPtrOutput) ToProjectVpcConfigPtrOutputWithContext 

func (o ProjectVpcConfigPtrOutput) ToProjectVpcConfigPtrOutputWithContext(ctx context.Context) ProjectVpcConfigPtrOutput

func (ProjectVpcConfigPtrOutput) VpcId 

func (o ProjectVpcConfigPtrOutput) VpcId() pulumi.StringPtrOutput

The ID of the VPC within which to run builds.

type SourceCredential 

type SourceCredential struct {
	pulumi.CustomResourceState

	// The ARN of Source Credential.
	Arn pulumi.StringOutput `pulumi:"arn"`
	// The type of authentication used to connect to a GitHub, GitHub Enterprise, or Bitbucket repository. An OAUTH connection is not supported by the API.
	AuthType pulumi.StringOutput `pulumi:"authType"`
	// The source provider used for this project.
	ServerType pulumi.StringOutput `pulumi:"serverType"`
	// For `GitHub` or `GitHub Enterprise`, this is the personal access token. For `Bitbucket`, this is the app password.
	Token pulumi.StringOutput `pulumi:"token"`
	// The Bitbucket username when the authType is `BASIC_AUTH`. This parameter is not valid for other types of source providers or connections.
	UserName pulumi.StringPtrOutput `pulumi:"userName"`
}

Provides a CodeBuild Source Credentials Resource.

## Example Usage

```go package main

import ( 

"github.com/pulumi/pulumi-aws/sdk/v2/go/aws/codebuild"
"github.com/pulumi/pulumi/sdk/v2/go/pulumi"

) 

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		_, err := codebuild.NewSourceCredential(ctx, "example", &codebuild.SourceCredentialArgs{
			AuthType:   pulumi.String("PERSONAL_ACCESS_TOKEN"),
			ServerType: pulumi.String("GITHUB"),
			Token:      pulumi.String("example"),
		})
		if err != nil {
			return err
		}
		return nil
	})
}

``` ### Bitbucket Server Usage

```go package main

import ( 

"github.com/pulumi/pulumi-aws/sdk/v2/go/aws/codebuild"
"github.com/pulumi/pulumi/sdk/v2/go/pulumi"

) 

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		_, err := codebuild.NewSourceCredential(ctx, "example", &codebuild.SourceCredentialArgs{
			AuthType:   pulumi.String("BASIC_AUTH"),
			ServerType: pulumi.String("BITBUCKET"),
			Token:      pulumi.String("example"),
			UserName:   pulumi.String("test-user"),
		})
		if err != nil {
			return err
		}
		return nil
	})
}

```

func GetSourceCredential 

func GetSourceCredential(ctx *pulumi.Context,
	name string, id pulumi.IDInput, state *SourceCredentialState, opts ...pulumi.ResourceOption) (*SourceCredential, error)

GetSourceCredential gets an existing SourceCredential resource's state with the given name, ID, and optional state properties that are used to uniquely qualify the lookup (nil if not required).

func NewSourceCredential 

func NewSourceCredential(ctx *pulumi.Context,
	name string, args *SourceCredentialArgs, opts ...pulumi.ResourceOption) (*SourceCredential, error)

NewSourceCredential registers a new resource with the given unique name, arguments, and options.

type SourceCredentialArgs 

type SourceCredentialArgs struct {
	// The type of authentication used to connect to a GitHub, GitHub Enterprise, or Bitbucket repository. An OAUTH connection is not supported by the API.
	AuthType pulumi.StringInput
	// The source provider used for this project.
	ServerType pulumi.StringInput
	// For `GitHub` or `GitHub Enterprise`, this is the personal access token. For `Bitbucket`, this is the app password.
	Token pulumi.StringInput
	// The Bitbucket username when the authType is `BASIC_AUTH`. This parameter is not valid for other types of source providers or connections.
	UserName pulumi.StringPtrInput
}

The set of arguments for constructing a SourceCredential resource.

func (SourceCredentialArgs) ElementType 

func (SourceCredentialArgs) ElementType() reflect.Type

type SourceCredentialState 

type SourceCredentialState struct {
	// The ARN of Source Credential.
	Arn pulumi.StringPtrInput
	// The type of authentication used to connect to a GitHub, GitHub Enterprise, or Bitbucket repository. An OAUTH connection is not supported by the API.
	AuthType pulumi.StringPtrInput
	// The source provider used for this project.
	ServerType pulumi.StringPtrInput
	// For `GitHub` or `GitHub Enterprise`, this is the personal access token. For `Bitbucket`, this is the app password.
	Token pulumi.StringPtrInput
	// The Bitbucket username when the authType is `BASIC_AUTH`. This parameter is not valid for other types of source providers or connections.
	UserName pulumi.StringPtrInput
}

func (SourceCredentialState) ElementType 

func (SourceCredentialState) ElementType() reflect.Type

type Webhook 

type Webhook struct {
	pulumi.CustomResourceState

	// A regular expression used to determine which branches get built. Default is all branches are built. It is recommended to use `filterGroup` over `branchFilter`.
	BranchFilter pulumi.StringPtrOutput `pulumi:"branchFilter"`
	// Information about the webhook's trigger. Filter group blocks are documented below.
	FilterGroups WebhookFilterGroupArrayOutput `pulumi:"filterGroups"`
	// The CodeBuild endpoint where webhook events are sent.
	PayloadUrl pulumi.StringOutput `pulumi:"payloadUrl"`
	// The name of the build project.
	ProjectName pulumi.StringOutput `pulumi:"projectName"`
	// The secret token of the associated repository. Not returned by the CodeBuild API for all source types.
	Secret pulumi.StringOutput `pulumi:"secret"`
	// The URL to the webhook.
	Url pulumi.StringOutput `pulumi:"url"`
}

Manages a CodeBuild webhook, which is an endpoint accepted by the CodeBuild service to trigger builds from source code repositories. Depending on the source type of the CodeBuild project, the CodeBuild service may also automatically create and delete the actual repository webhook as well.

## Example Usage ### Bitbucket and GitHub

When working with [Bitbucket](https://bitbucket.org) and [GitHub](https://github.com) source CodeBuild webhooks, the CodeBuild service will automatically create (on `codebuild.Webhook` resource creation) and delete (on `codebuild.Webhook` resource deletion) the Bitbucket/GitHub repository webhook using its granted OAuth permissions. This behavior cannot be controlled by this provider.

> **Note:** The AWS account that this provider uses to create this resource *must* have authorized CodeBuild to access Bitbucket/GitHub's OAuth API in each applicable region. This is a manual step that must be done *before* creating webhooks with this resource. If OAuth is not configured, AWS will return an error similar to `ResourceNotFoundException: Could not find access token for server type github`. More information can be found in the CodeBuild User Guide for [Bitbucket](https://docs.aws.amazon.com/codebuild/latest/userguide/sample-bitbucket-pull-request.html) and [GitHub](https://docs.aws.amazon.com/codebuild/latest/userguide/sample-github-pull-request.html).

> **Note:** Further managing the automatically created Bitbucket/GitHub webhook with the `bitbucketHook`/`githubRepositoryWebhook` resource is only possible with importing that resource after creation of the `codebuild.Webhook` resource. The CodeBuild API does not ever provide the `secret` attribute for the `codebuild.Webhook` resource in this scenario.

```go package main

import ( 

"github.com/pulumi/pulumi-aws/sdk/v2/go/aws/codebuild"
"github.com/pulumi/pulumi/sdk/v2/go/pulumi"

) 

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		_, err := codebuild.NewWebhook(ctx, "example", &codebuild.WebhookArgs{
			FilterGroups: codebuild.WebhookFilterGroupArray{
				&codebuild.WebhookFilterGroupArgs{
					Filters: codebuild.WebhookFilterGroupFilterArray{
						&codebuild.WebhookFilterGroupFilterArgs{
							Pattern: pulumi.String("PUSH"),
							Type:    pulumi.String("EVENT"),
						},
						&codebuild.WebhookFilterGroupFilterArgs{
							Pattern: pulumi.String("master"),
							Type:    pulumi.String("HEAD_REF"),
						},
					},
				},
			},
			ProjectName: pulumi.String(aws_codebuild_project.Example.Name),
		})
		if err != nil {
			return err
		}
		return nil
	})
}

``` ### GitHub Enterprise

When working with [GitHub Enterprise](https://enterprise.github.com/) source CodeBuild webhooks, the GHE repository webhook must be separately managed (e.g. manually or with the `githubRepositoryWebhook` resource).

More information creating webhooks with GitHub Enterprise can be found in the [CodeBuild User Guide](https://docs.aws.amazon.com/codebuild/latest/userguide/sample-github-enterprise.html).

```go package main

import ( 

"github.com/pulumi/pulumi-aws/sdk/v2/go/aws/codebuild"
"github.com/pulumi/pulumi-github/sdk/go/github"
"github.com/pulumi/pulumi/sdk/v2/go/pulumi"

) 

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		exampleWebhook, err := codebuild.NewWebhook(ctx, "exampleWebhook", &codebuild.WebhookArgs{
			ProjectName: pulumi.String(aws_codebuild_project.Example.Name),
		})
		if err != nil {
			return err
		}
		_, err = github.NewRepositoryWebhook(ctx, "exampleRepositoryWebhook", &github.RepositoryWebhookArgs{
			Active: pulumi.Bool(true),
			Configuration: &github.RepositoryWebhookConfigurationArgs{
				ContentType: pulumi.String("json"),
				InsecureSsl: pulumi.Bool(false),
				Secret:      exampleWebhook.Secret,
				Url:         exampleWebhook.PayloadUrl,
			},
			Events: pulumi.StringArray{
				pulumi.String("push"),
			},
			Repository: pulumi.String(github_repository.Example.Name),
		})
		if err != nil {
			return err
		}
		return nil
	})
}

```

func GetWebhook 

func GetWebhook(ctx *pulumi.Context,
	name string, id pulumi.IDInput, state *WebhookState, opts ...pulumi.ResourceOption) (*Webhook, error)

GetWebhook gets an existing Webhook resource's state with the given name, ID, and optional state properties that are used to uniquely qualify the lookup (nil if not required).

func NewWebhook 

func NewWebhook(ctx *pulumi.Context,
	name string, args *WebhookArgs, opts ...pulumi.ResourceOption) (*Webhook, error)

NewWebhook registers a new resource with the given unique name, arguments, and options.

type WebhookArgs 

type WebhookArgs struct {
	// A regular expression used to determine which branches get built. Default is all branches are built. It is recommended to use `filterGroup` over `branchFilter`.
	BranchFilter pulumi.StringPtrInput
	// Information about the webhook's trigger. Filter group blocks are documented below.
	FilterGroups WebhookFilterGroupArrayInput
	// The name of the build project.
	ProjectName pulumi.StringInput
}

The set of arguments for constructing a Webhook resource.

func (WebhookArgs) ElementType 

func (WebhookArgs) ElementType() reflect.Type

type WebhookFilterGroup 

type WebhookFilterGroup struct {
	// A webhook filter for the group. Filter blocks are documented below.
	Filters []WebhookFilterGroupFilter `pulumi:"filters"`
}

type WebhookFilterGroupArgs 

type WebhookFilterGroupArgs struct {
	// A webhook filter for the group. Filter blocks are documented below.
	Filters WebhookFilterGroupFilterArrayInput `pulumi:"filters"`
}

func (WebhookFilterGroupArgs) ElementType 

func (WebhookFilterGroupArgs) ElementType() reflect.Type

func (WebhookFilterGroupArgs) ToWebhookFilterGroupOutput 

func (i WebhookFilterGroupArgs) ToWebhookFilterGroupOutput() WebhookFilterGroupOutput

func (WebhookFilterGroupArgs) ToWebhookFilterGroupOutputWithContext 

func (i WebhookFilterGroupArgs) ToWebhookFilterGroupOutputWithContext(ctx context.Context) WebhookFilterGroupOutput

type WebhookFilterGroupArray 

type WebhookFilterGroupArray []WebhookFilterGroupInput

func (WebhookFilterGroupArray) ElementType 

func (WebhookFilterGroupArray) ElementType() reflect.Type

func (WebhookFilterGroupArray) ToWebhookFilterGroupArrayOutput 

func (i WebhookFilterGroupArray) ToWebhookFilterGroupArrayOutput() WebhookFilterGroupArrayOutput

func (WebhookFilterGroupArray) ToWebhookFilterGroupArrayOutputWithContext 

func (i WebhookFilterGroupArray) ToWebhookFilterGroupArrayOutputWithContext(ctx context.Context) WebhookFilterGroupArrayOutput

type WebhookFilterGroupArrayInput 

type WebhookFilterGroupArrayInput interface {
	pulumi.Input

	ToWebhookFilterGroupArrayOutput() WebhookFilterGroupArrayOutput
	ToWebhookFilterGroupArrayOutputWithContext(context.Context) WebhookFilterGroupArrayOutput
}

WebhookFilterGroupArrayInput is an input type that accepts WebhookFilterGroupArray and WebhookFilterGroupArrayOutput values. You can construct a concrete instance of `WebhookFilterGroupArrayInput` via: 

WebhookFilterGroupArray{ WebhookFilterGroupArgs{...} }

type WebhookFilterGroupArrayOutput 

type WebhookFilterGroupArrayOutput struct{ *pulumi.OutputState }

func (WebhookFilterGroupArrayOutput) ElementType 

func (WebhookFilterGroupArrayOutput) ElementType() reflect.Type

func (WebhookFilterGroupArrayOutput) Index 

func (o WebhookFilterGroupArrayOutput) Index(i pulumi.IntInput) WebhookFilterGroupOutput

func (WebhookFilterGroupArrayOutput) ToWebhookFilterGroupArrayOutput 

func (o WebhookFilterGroupArrayOutput) ToWebhookFilterGroupArrayOutput() WebhookFilterGroupArrayOutput

func (WebhookFilterGroupArrayOutput) ToWebhookFilterGroupArrayOutputWithContext 

func (o WebhookFilterGroupArrayOutput) ToWebhookFilterGroupArrayOutputWithContext(ctx context.Context) WebhookFilterGroupArrayOutput

type WebhookFilterGroupFilter 

type WebhookFilterGroupFilter struct {
	// If set to `true`, the specified filter does *not* trigger a build. Defaults to `false`.
	ExcludeMatchedPattern *bool `pulumi:"excludeMatchedPattern"`
	// For a filter that uses `EVENT` type, a comma-separated string that specifies one event: `PUSH`, `PULL_REQUEST_CREATED`, `PULL_REQUEST_UPDATED`, `PULL_REQUEST_REOPENED`. `PULL_REQUEST_MERGED` works with GitHub & GitHub Enterprise only. For a filter that uses any of the other filter types, a regular expression.
	Pattern string `pulumi:"pattern"`
	// The webhook filter group's type. Valid values for this parameter are: `EVENT`, `BASE_REF`, `HEAD_REF`, `ACTOR_ACCOUNT_ID`, `FILE_PATH`. At least one filter group must specify `EVENT` as its type.
	Type string `pulumi:"type"`
}

type WebhookFilterGroupFilterArgs 

type WebhookFilterGroupFilterArgs struct {
	// If set to `true`, the specified filter does *not* trigger a build. Defaults to `false`.
	ExcludeMatchedPattern pulumi.BoolPtrInput `pulumi:"excludeMatchedPattern"`
	// For a filter that uses `EVENT` type, a comma-separated string that specifies one event: `PUSH`, `PULL_REQUEST_CREATED`, `PULL_REQUEST_UPDATED`, `PULL_REQUEST_REOPENED`. `PULL_REQUEST_MERGED` works with GitHub & GitHub Enterprise only. For a filter that uses any of the other filter types, a regular expression.
	Pattern pulumi.StringInput `pulumi:"pattern"`
	// The webhook filter group's type. Valid values for this parameter are: `EVENT`, `BASE_REF`, `HEAD_REF`, `ACTOR_ACCOUNT_ID`, `FILE_PATH`. At least one filter group must specify `EVENT` as its type.
	Type pulumi.StringInput `pulumi:"type"`
}

func (WebhookFilterGroupFilterArgs) ElementType 

func (WebhookFilterGroupFilterArgs) ElementType() reflect.Type

func (WebhookFilterGroupFilterArgs) ToWebhookFilterGroupFilterOutput 

func (i WebhookFilterGroupFilterArgs) ToWebhookFilterGroupFilterOutput() WebhookFilterGroupFilterOutput

func (WebhookFilterGroupFilterArgs) ToWebhookFilterGroupFilterOutputWithContext 

func (i WebhookFilterGroupFilterArgs) ToWebhookFilterGroupFilterOutputWithContext(ctx context.Context) WebhookFilterGroupFilterOutput

type WebhookFilterGroupFilterArray 

type WebhookFilterGroupFilterArray []WebhookFilterGroupFilterInput

func (WebhookFilterGroupFilterArray) ElementType 

func (WebhookFilterGroupFilterArray) ElementType() reflect.Type

func (WebhookFilterGroupFilterArray) ToWebhookFilterGroupFilterArrayOutput 

func (i WebhookFilterGroupFilterArray) ToWebhookFilterGroupFilterArrayOutput() WebhookFilterGroupFilterArrayOutput

func (WebhookFilterGroupFilterArray) ToWebhookFilterGroupFilterArrayOutputWithContext 

func (i WebhookFilterGroupFilterArray) ToWebhookFilterGroupFilterArrayOutputWithContext(ctx context.Context) WebhookFilterGroupFilterArrayOutput

type WebhookFilterGroupFilterArrayInput 

type WebhookFilterGroupFilterArrayInput interface {
	pulumi.Input

	ToWebhookFilterGroupFilterArrayOutput() WebhookFilterGroupFilterArrayOutput
	ToWebhookFilterGroupFilterArrayOutputWithContext(context.Context) WebhookFilterGroupFilterArrayOutput
}

WebhookFilterGroupFilterArrayInput is an input type that accepts WebhookFilterGroupFilterArray and WebhookFilterGroupFilterArrayOutput values. You can construct a concrete instance of `WebhookFilterGroupFilterArrayInput` via: 

WebhookFilterGroupFilterArray{ WebhookFilterGroupFilterArgs{...} }

type WebhookFilterGroupFilterArrayOutput 

type WebhookFilterGroupFilterArrayOutput struct{ *pulumi.OutputState }

func (WebhookFilterGroupFilterArrayOutput) ElementType 

func (WebhookFilterGroupFilterArrayOutput) ElementType() reflect.Type

func (WebhookFilterGroupFilterArrayOutput) Index 

func (o WebhookFilterGroupFilterArrayOutput) Index(i pulumi.IntInput) WebhookFilterGroupFilterOutput

func (WebhookFilterGroupFilterArrayOutput) ToWebhookFilterGroupFilterArrayOutput 

func (o WebhookFilterGroupFilterArrayOutput) ToWebhookFilterGroupFilterArrayOutput() WebhookFilterGroupFilterArrayOutput

func (WebhookFilterGroupFilterArrayOutput) ToWebhookFilterGroupFilterArrayOutputWithContext 

func (o WebhookFilterGroupFilterArrayOutput) ToWebhookFilterGroupFilterArrayOutputWithContext(ctx context.Context) WebhookFilterGroupFilterArrayOutput

type WebhookFilterGroupFilterInput 

type WebhookFilterGroupFilterInput interface {
	pulumi.Input

	ToWebhookFilterGroupFilterOutput() WebhookFilterGroupFilterOutput
	ToWebhookFilterGroupFilterOutputWithContext(context.Context) WebhookFilterGroupFilterOutput
}

WebhookFilterGroupFilterInput is an input type that accepts WebhookFilterGroupFilterArgs and WebhookFilterGroupFilterOutput values. You can construct a concrete instance of `WebhookFilterGroupFilterInput` via: 

WebhookFilterGroupFilterArgs{...}

type WebhookFilterGroupFilterOutput 

type WebhookFilterGroupFilterOutput struct{ *pulumi.OutputState }

func (WebhookFilterGroupFilterOutput) ElementType 

func (WebhookFilterGroupFilterOutput) ElementType() reflect.Type

func (WebhookFilterGroupFilterOutput) ExcludeMatchedPattern 

func (o WebhookFilterGroupFilterOutput) ExcludeMatchedPattern() pulumi.BoolPtrOutput

If set to `true`, the specified filter does *not* trigger a build. Defaults to `false`.

func (WebhookFilterGroupFilterOutput) Pattern 

func (o WebhookFilterGroupFilterOutput) Pattern() pulumi.StringOutput

For a filter that uses `EVENT` type, a comma-separated string that specifies one event: `PUSH`, `PULL_REQUEST_CREATED`, `PULL_REQUEST_UPDATED`, `PULL_REQUEST_REOPENED`. `PULL_REQUEST_MERGED` works with GitHub & GitHub Enterprise only. For a filter that uses any of the other filter types, a regular expression.

func (WebhookFilterGroupFilterOutput) ToWebhookFilterGroupFilterOutput 

func (o WebhookFilterGroupFilterOutput) ToWebhookFilterGroupFilterOutput() WebhookFilterGroupFilterOutput

func (WebhookFilterGroupFilterOutput) ToWebhookFilterGroupFilterOutputWithContext 

func (o WebhookFilterGroupFilterOutput) ToWebhookFilterGroupFilterOutputWithContext(ctx context.Context) WebhookFilterGroupFilterOutput

func (WebhookFilterGroupFilterOutput) Type 

func (o WebhookFilterGroupFilterOutput) Type() pulumi.StringOutput

The webhook filter group's type. Valid values for this parameter are: `EVENT`, `BASE_REF`, `HEAD_REF`, `ACTOR_ACCOUNT_ID`, `FILE_PATH`. At least one filter group must specify `EVENT` as its type.

type WebhookFilterGroupInput 

type WebhookFilterGroupInput interface {
	pulumi.Input

	ToWebhookFilterGroupOutput() WebhookFilterGroupOutput
	ToWebhookFilterGroupOutputWithContext(context.Context) WebhookFilterGroupOutput
}

WebhookFilterGroupInput is an input type that accepts WebhookFilterGroupArgs and WebhookFilterGroupOutput values. You can construct a concrete instance of `WebhookFilterGroupInput` via: 

WebhookFilterGroupArgs{...}

type WebhookFilterGroupOutput 

type WebhookFilterGroupOutput struct{ *pulumi.OutputState }

func (WebhookFilterGroupOutput) ElementType 

func (WebhookFilterGroupOutput) ElementType() reflect.Type

func (WebhookFilterGroupOutput) Filters 

func (o WebhookFilterGroupOutput) Filters() WebhookFilterGroupFilterArrayOutput

A webhook filter for the group. Filter blocks are documented below.

func (WebhookFilterGroupOutput) ToWebhookFilterGroupOutput 

func (o WebhookFilterGroupOutput) ToWebhookFilterGroupOutput() WebhookFilterGroupOutput

func (WebhookFilterGroupOutput) ToWebhookFilterGroupOutputWithContext 

func (o WebhookFilterGroupOutput) ToWebhookFilterGroupOutputWithContext(ctx context.Context) WebhookFilterGroupOutput

type WebhookState 

type WebhookState struct {
	// A regular expression used to determine which branches get built. Default is all branches are built. It is recommended to use `filterGroup` over `branchFilter`.
	BranchFilter pulumi.StringPtrInput
	// Information about the webhook's trigger. Filter group blocks are documented below.
	FilterGroups WebhookFilterGroupArrayInput
	// The CodeBuild endpoint where webhook events are sent.
	PayloadUrl pulumi.StringPtrInput
	// The name of the build project.
	ProjectName pulumi.StringPtrInput
	// The secret token of the associated repository. Not returned by the CodeBuild API for all source types.
	Secret pulumi.StringPtrInput
	// The URL to the webhook.
	Url pulumi.StringPtrInput
}

func (WebhookState) ElementType 

func (WebhookState) ElementType() reflect.Type

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.